Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
45–95mm Toggle Clamp Horizontal Base With Safety Lock, 7,000N Thrust, 8,000N Hold - Kukamet
Taking advantage of a robust 7 kN closing force and an 8 kN holding capacity, this lever latch secures workpieces reliably while the horizontal base and safety lock ensure stable, repeatable fixture mounting; order the latch clamp directly via Metav Werkzeuge or consult our specialists for application advice. Latch Clamp 311 — Horizontal-base lever latch with safety lock (Kukamet) The Latch Clamp 311 is a horizontal-base lever latch with safety lock and hook, engineered for fast, secure clamping in jigs, fixtures and assembly applications. Horizontal-base design for stable mounting Safety lock prevents unintentional release Adjustable arm 45–95 mm for variable clamping 7 kN closing force with 8 kN holding capacity Reliable clamping that speeds production The Latch Clamp 311 delivers a high closing force in a compact footprint, which translates into quicker cycle times and fewer re-clamps on production lines. The mechanism converts lever movement into consistent clamp pressure, providing a measurable and repeatable result for each actuation. With a 7 kN closing force and 8 kN holding capacity, the device suits medium-duty fixture tasks where fast clamping and release are required. The proven toggle mechanism reduces operator effort while maintaining secure retention during machining, assembly or transport inside the work cell. Secure mounting and practical dimensions for workshop use Designed with a horizontal base, the clamp mounts flat to plates or fixture blocks for maximum stability. The adjustable arm 45–95 mm allows adaptation to varying workpiece heights, and the 95 mm thread provides a wide adjustment range for fine setting. The component’s blackened finish offers corrosion resistance in standard workshop environments and a low-reflective surface for inspection tasks. With a nominal weight of 0.815 kg, the clamp balances robustness with manageable mass for fixtures that may be repositioned or transported between stations. Safety, hook option and typical applications Equipped with hook and a safety lock, the latch prevents accidental opening under vibration or shock, enhancing process safety in automated or semi-automated lines. Typical applications include holding parts in assembly jigs, temporary retention during welding preparation, and securing components during manual operations where rapid release is required. The compact lever construction supports ergonomic handling, while the clear mechanical locking gives confidence in repeatable production environments. For secure, efficient fixture solutions, contact Metav Werkzeuge to request the Kukamet Latch Clamp 311 for integration into standard jigs and assembly stations — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B311-4-L GTIN: 8680731508284 Manufacturer: Kukamet Facts Closing force: 7000 N Holding capacity: 8000 N Arm range: 45–95 mm Thread length: 95 mm Weight: 0.815 kg Special features Horizontal base mounting Safety lock With hook Blackened finish Lever/toggle latch design FAQ How much clamping force does the latch provide? The Kukamet Latch Clamp 311 provides a closing force of 7000 N and a holding capacity of 8000 N, suitable for medium-duty fixture tasks. Can the clamp be adjusted for different part heights? Yes, the adjustable arm offers a range of 45–95 mm and the 95 mm threaded section allows precise height setting for varied workpiece dimensions. Is the latch suitable for use in welding fixtures? The latch’s safety lock and robust toggle mechanism make it appropriate for welding preparation and fixture holding where secure retention is essential. What mounting method is required for installation? The device uses a horizontal base for flat mounting to fixture plates or blocks, providing stable and repeatable positioning in jigs and assembly stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4650 N Hold Force Horizontal Base Push‑Rod Clamp 4.5 kN Thrust, Black Oxide Finish - Kukamet
Take advantage of the combination of high clamping and holding forces, compact weight and straightforward fixture integration to keep production lines secure and precise. The horizontal foot and M10x70 pressure spindle enable fast mounting and fine adjustment. Order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 511 — Kukamet horizontal-foot clamp with 4,500 N clamping force The Push-rod clamp 511 is a compact horizontal push-rod clamp for secure workholding in jigs and fixtures across general workshop and production applications Horizontal-foot mounting for stable installation Clamping force 4,500 N and holding force 4,650 N M10x70 pressure spindle for fine adjustment Blackened finish for corrosion resistance Consistent, measurable clamping performance for production environments The push-rod clamp delivers a reliable clamping force of 4,500 N and a holding force of 4,650 N, values that support repeatable part retention in fixtures and jigs. Specifying forces in newton values allows straightforward comparison with other clamping elements and ensures that the clamping device meets process requirements for repeatability and safety. The compact mass of 1.07 kg reduces inertia in moving fixtures and simplifies handling during assembly, while the solid mechanical design translates to fewer process interruptions and less rework. Precise adjustment and easy integration reduce setup time A M10x70 pressure spindle is fitted to provide stepless adjustment of the clamping travel and force, enabling accurate positioning of the clamping face in diverse fixture geometries. The horizontal-foot mounting type permits direct attachment to machine tables or fixture plates without additional adapters, shortening installation time. The blackened finish offers basic surface protection and reduces glare in illuminated workstations, supporting consistent operator feedback during manual set-up. Technical expressions such as clamping and holding force are provided here to enable correct specification and to avoid undersizing or overspecifying the clamping element. Durable workshop design and supplier assurance for long-term use Manufactured by Kukamet and listed as SKU B511-6, the unit is designed for frequent use in workshop and light-industrial settings where dependable retention and quick fixture cycles are required. The straightforward construction minimises maintenance needs and facilitates routine inspection of wear parts. For buyers who prioritise supplier transparency and reliable European distribution, the product is offered through Metav Werkzeuge, which maintains a broad stock range and acts as a quality filter for the market, helping to secure uninterrupted supply chains. Contact Metav Werkzeuge for a specification check and delivery options from Emmerich: eMail info@metav-werkzeuge.com or phone +49 2822 7131930 to confirm suitability for planned fixtures and production runs Technical data SKU: B511-6 GTIN: 8680731503890 Model: 511 Facts Clamping force max: 4,500 N Holding force max: 4,650 N Weight: 1.07 kg Pressure spindle: M10x70 Special features Mounting: horizontal foot Finish: blackened Material/finish: blackened Special features: none FAQ What maximum clamping and holding forces does the clamp provide? The Kukamet push-rod clamp 511 (SKU B511-6) provides a clamping force of 4,500 N and a holding force of 4,650 N. How is the clamp adjusted to suit different workpieces? Adjustment is via the M10x70 pressure spindle fitted to the unit; the spindle allows stepless regulation of clamping position and force for precise set-up with the Push-rod clamp 511. What mounting method is required for fixture integration? The unit uses a horizontal foot mounting, enabling direct attachment to machine tables or fixture plates without special adapters for the Kukamet B511-6. Is the surface treated for workshop durability? Yes, the clamp features a blackened finish that offers basic corrosion protection and reduced surface glare in illuminated work areas. What is the weight and handling implication for fixture design? The clamp weighs 1.07 kg; its low mass helps with manual assembly and reduces added inertia in moving fixtures when integrating the Kukamet 511. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5 Size Closure Clamp Horizontal Zinc Plated Passivated, 5000 N Holding Force - AMF
Combines a galvanised, passivated finish with a 5,000 N maximum holding force and a 14 mm adjustable travel to deliver secure, repeatable clamping in jigs and fixtures — order directly via Metav Werkzeuge or contact our consultants for application advice. AMF 6847 Horizontal Latch Clamp, Size 5 — galvanised/passivated, 5,000 N The AMF 6847 horizontal latch clamp (size 5) is a robust locking clamp intended for fixture and jig applications where secure, repeatable clamping and corrosion protection are required. Galvanised, passivated corrosion-resistant finish Adjustable 14 mm clamping travel for precise positioning Maximum holding force 5,000 N for secure workholding Horizontal design for fixture and jig integration Long-term protection for workshop environments The galvanised and passivated surface treatment gives the latch clamp reliable corrosion resistance, reducing the need for frequent surface rework and extending service life in routine workshop conditions. For users working in production halls or maintenance bays, the protective finish minimises visible wear and helps maintain consistent contact geometry over time. This translates into fewer interruptions for part handling and a more predictable process flow. Measurable clamping power for stable processes With a maximum holding force of 5,000 N, this clamp provides a clearly defined performance level for securing components during machining, assembly or testing. The figure indicates the peak static retention capability under ideal engagement; in practice, this means improved resistance to slippage and better dimensional consistency for repeat operations. Performance-minded teams can rely on the documented holding force when designing fixtures or specifying safety margins. Fine adjustment for accurate positioning The built-in adjustable travel of 14 mm allows precise setting of the clamping point to suit varying workpiece heights or fixture tolerances. Adjustability ensures consistent contact pressure without over-stressing the component or the clamp mechanics, supporting repeatability in batch production. The horizontal orientation of the mechanism facilitates low-profile mounting and straightforward integration into existing jigs and tooling setups. Designed for quick integration and straightforward upkeep Constructed for workshop use, the latch clamp's geometry and size designation make it suitable for standard fixture layouts where a compact horizontal clamp is required. Maintenance needs are limited to routine inspection and light lubrication of pivot points; the protective finish reduces surface corrosion and helps preserve moving parts. Supply and ordering are simplified through Metav Werkzeuge, a long-standing partner for precision workshop equipment. For reliable fixture clamping, choose the AMF 6847 horizontal latch clamp and consult Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833522NW Type: 6847 Product: Latch clamp Brand: AMF Finish: galvanised, passivated Packaging unit: 1 Facts Adjustment travel: 14 mm Maximum holding force: 5,000 N B1: 26–40 mm B2: 57–71 mm C: 29 mm D: 10.75 mm E1: 27–42 mm E2: 58–73 mm G: 11.2 mm H: 49 mm H1: 69 mm H2: 282 mm K: 13 mm L: 55 mm L1: 189.5 mm M: 55.5–63 mm N: 85 mm R: 8 mm S: 147 mm Special features Size: 5 Horizontal orientation Galvanised Passivated Product type: Latch clamp SKU: 4000833522NW FAQ What is the maximum holding force of this clamp? The AMF 6847 horizontal latch clamp (SKU 4000833522NW) provides a maximum holding force of 5,000 N. Does the finish protect against corrosion? The galvanised and passivated surface improves corrosion resistance for workshop use and helps maintain functional surfaces over time. Can the clamping stroke be adjusted to suit different workpieces? Yes, the clamping travel is adjustable and offers 14 mm of stroke to accommodate different part heights and tolerances. Is the clamp suitable for fixture mounting in a horizontal orientation? The design of this latch clamp is specifically for horizontal mounting in jigs and fixtures; the dimensional data (B1, B2, L1 etc.) should be used for precise layout and mounting decisions. What maintenance is recommended for long service life? Routine inspection of moving parts and light lubrication of pivots are recommended; the galvanised/passivated finish reduces the need for intensive surface maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 Size Vertical Clamp With Horizontal Foot M12 x 80 Actuating Screw, 3,000 N Clamping Force - AMF
Combine a 5,000 N holding force with a compact mount and horizontal foot for reliable, repeatable clamping in jig and fixture applications; purchase or request advice via Metav Werkzeuge. Vertical clamp No. 6800 (Size 5) – horizontal foot, AMF The Vertical clamp No. 6800 is a robust vertical clamping device designed for fixtures and jigs where a horizontal mounting base is required for secure, compact installation. High holding force 5,000 N Max clamping force 3,000 N Horizontal foot for secure mounting M12×80 pressure screw included Consistent clamping performance for production use The clamp delivers a clear separation between clamping force and holding force, with a clamping capability of up to 3,000 N and a maximum holding capacity of 5,000 N. This distinction matters in practice: the clamping force refers to the active force applied by the pressure screw, whereas the holding force indicates the maximum static load the device can withstand once engaged. Such rated values make the device suitable for repetitive fixture work and moderate machining operations where stable workholding is essential. The repeatable action of the mechanism supports cycle-based production and reduces setup variability. Flexible installation and precise height adjustment Equipped with a horizontal foot, the design allows mounting on flat fixture plates or machine tables without bulky offsets. The integrated M12×80 pressure screw provides standardised actuation and easy replacement. Adjustable parameters include the clamping height range (HW min –3 mm to HW max 27.5 mm) and an adjustable jaw travel (L: 26.5–31.5 mm), enabling adaptation to thin and thicker workpieces alike. Key dimensions such as B: 140 mm, H: 55.8 mm and H1: 281 mm contribute to a compact footprint that saves valuable table space while maintaining accessibility for toolpaths and loading. Designed for workshop reliability and quick integration The vertical clamp suits toolrooms, small-batch production and assembly jigs where robust hold and simple mechanics are preferred. With a clear mechanical concept and standard components, maintenance remains straightforward and downtime is reduced. The unit ships as a single item (packaging unit 1) ready for immediate integration into existing fixtures. With defined numerical limits and standardised fastenings, the clamp offers planners and engineers predictable behaviour across repeated cycles, supporting both manual and automated clamping sequences. For dependable clamping from AMF, order the Vertical clamp No. 6800 via Metav Werkzeuge or contact Metav Werkzeuge for configuration advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 4000833505NW Type: 6800 Product: Vertical clamp No. 6800 (Size 5) Execution: with horizontal foot Manufacturer: AMF Packaging unit: 1 Dimensions & forces A: 14 mm B: 140 mm C: 45 mm D: 8.5 mm E: 73 mm F: 34 mm H: 55.8 mm H1: 281 mm HW min: -3 mm HW max: 27.5 mm I: 25 mm K: 9.5 mm L: 26.5–31.5 mm L1: 195 mm L2: 185 mm M: 45–50 mm N: 70 mm P: 65 mm a: 115° Max clamping force: 3,000 N Max holding force: 5,000 N Features & design M12×80 pressure screw Horizontal foot for mounting Adjustable clamping height range Compact footprint for fixture plates Stroke and length ranges for fine adjustment FAQ What is the maximum holding and clamping force of this clamp? The vertical clamp No. 6800 (AMF, SKU 4000833505NW) provides a maximum holding force of 5,000 N and a clamping force up to 3,000 N. Can the clamp be mounted on standard fixture plates? Yes; the horizontal foot is intended for mounting on flat fixture plates or machine tables and supports compact installation without large offsets. What adjustment ranges are available for clamping height and jaw travel? Clamping height is adjustable from HW min –3 mm to HW max 27.5 mm; jaw travel L is adjustable between 26.5 mm and 31.5 mm to accommodate varying workpiece thicknesses. Is a pressure screw supplied and what size is it? The device includes an M12×80 pressure screw as specified in the technical details for standardised actuation. Which applications suit this vertical clamp? The clamp is suitable for jigs, fixtures and repetitive production tasks where secure, repeatable holding is required and a horizontal mounting base is preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5,000 N Vertical Clamp With 118.5mm Arm, Angled Base, Hardened Black Finish - Kukamet
Take advantage of the combination of a solid holding arm, a compact 118.5 mm reach and up to 5,000 N holding force for reliable, repeatable workholding in small fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for fixture integration. Vertical Clamp 213 — Kukamet, 118.5 mm arm, 5,000 N holding force The Vertical Clamp 213 is a lever-actuated vertical clamp designed for secure workholding in jigs and fixtures across production and assembly applications Solid holding arm for high stability 118.5 mm arm length for deep clamping reach 5,000 N maximum holding force Consistent clamping performance for production environments Built for repetitive tasks, this lever clamp delivers a combination of 5,000 N maximum holding force and 4,500 N pressing force that keeps workpieces secure during machining, assembly and testing. The relatively compact 118.5 mm arm provides a useful reach without adding bulk to the fixture, while the solid holding arm minimises deflection under load. These measurable values translate directly into fewer reworks, faster cycle times and predictable outcomes on the shop floor, making the clamp a pragmatic choice where process stability is paramount. Simple integration and dependable mounting for fixtures The angled base (Winkelfuß) allows straightforward attachment to common jig plates and fixture blocks, reducing the time required for installation and alignment. At 1.66 kg, the unit is substantial enough to feel robust yet light enough to fit into confined assemblies. The lever-actuated mechanism is familiar to production teams and makes operation immediate and controllable without specialised training. As a result, fixture designers gain a compact, lever-actuated workholding solution that delivers repeatable engagement and quick release for high-throughput operations. Wear resistance and low-maintenance operation Finished in a blackened/brunished surface, the clamp resists surface wear and provides a pragmatic level of corrosion protection in typical workshop conditions. The solid holding arm construction and proven mechanical design reduce the frequency of adjustments and service interventions. For operations aiming to lower total cost of ownership, the combination of robust materials and straightforward mechanics provides long service intervals and predictable behaviour over many cycles, supporting continuous production with minimal downtime. For procurement and technical guidance on the Kukamet Vertical Clamp 213, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific fixtures and production requirements Technical data SKU: B213-5-D-C1 GTIN: 8680731508062 Model: 213 Facts Arm length: 118.5 mm Maximum holding force: 5,000 N Maximum pressing force: 4,500 N Weight: 1.66 kg eClass: 21041717 ETIM: EC011973 Special features Angled base mounting Solid holding arm Blackened / brunished finish Lever-actuated vertical clamp FAQ What materials is the clamp suitable for? The Vertical Clamp 213 is a general-purpose workholding device; its robust design supports common fixture tasks on components made from metals and engineered plastics when used within the stated forces. How is the clamp mounted in a fixture? Mounting is via the angled base; the clamp is intended to be fastened to jig plates or fixture blocks using standard screws and alignment processes compatible with existing fixture designs. What maintenance does the clamp require? Periodic inspection of the lever mechanism and lubrication of pivot points will maintain performance; the blackened finish reduces visible wear and simplifies upkeep for the Vertical Clamp 213. Can the clamp be used in automated stations? Yes, the lever-actuated mechanism and compact profile allow integration into automated or semi-automated fixtures where manual actuation or robot-assisted engagement is feasible. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5,000 N Vertical Clamp With 218.5mm Arm, Massive Holding Arm & Safety Lock - Kukamet
Take advantage of the combination of robust clamping performance, a long reach arm and a reliable safety lock for consistent workholding in fixtures and jigs; order directly via Metav Werkzeuge or ask our consultants for application advice. Vertikalspanner 213 vertical clamp with 218.5 mm arm and safety lock (Kukamet) A Vertikalspanner 213 is a vertical lever clamp designed for secure workholding in machining, assembly and fixture applications where repeatable clamping and a compact mounting footprint are required. Massive holding arm with safety lock 218.5 mm levering arm for extended reach Holding force up to 5,000 N Clamping force rated at 4,500 N Angle base foot for secure mounting Robust clamping for reliable production results The clamp combines a massive arm with a mechanical safety lock to maintain position under vibration and repeated cycles. The solid build reduces elastic deformation during clamping, which helps preserve part alignment and repeatability. With a holding force of 5,000 N and a clamping force of 4,500 N, the device delivers the mechanical stability expected in small-series production and fixture assemblies; the forces correspond to substantial retention capacity for typical workshop tasks without introducing complex hydraulic systems. The blackened finish provides corrosion resistance and a consistent visual appearance on the shop floor. Flexible installation and extended reach for varied fixtures An arm length of 218.5 mm gives extra reach for obstructed or recessed clamping positions, enabling secure support across a wider variety of workpieces and tooling setups. The angle base foot allows a compact, low-profile mounting to plates and tooling blocks, simplifying integration into existing jigs. The clamp’s moderate mass (approx. 1.64 kg) keeps fixture weight manageable while still providing the rigidity required for repeatable clamping cycles. This combination of reach and mounting flexibility reduces the need for bespoke fixture alterations. Safe, repeatable operation that suits workshop workflows Engineered as a lever-style vertical clamp, the mechanism locks positively when engaged, preventing unintended release during machining or handling. The safety locking feature supports operator confidence during cycle work and manual operations alike, while the robust construction withstands frequent use. The finish described as blackened helps protect contact surfaces from corrosion and wear, extending service life. Together, these attributes support efficient processes and minimise rework, which is particularly relevant for production environments where uptime and consistent quality matter. Contact Metav Werkzeuge for delivery options from Emmerich, expert technical consultation and assistance integrating Kukamet vertical clamps into existing fixtures Technical data Article number: B213-5-D-L-C3 Manufacturer: Kukamet Category: Spanner eClass: 21041717 ETIM: EC011973 Facts Arm length: 218.5 mm Weight: 1.64 kg Max clamping force: 4,500 N Max holding force: 5,000 N Special features Angle base foot mounting Blackened finish Massive holding arm Safety locking mechanism FAQ What materials is this clamp suitable for? The clamp is a general-purpose vertical lever clamp suitable for securing metal and non-metal workpieces in fixtures; selection should consider clamping points and surface protection for sensitive materials. How much holding and clamping force does the device provide? The device delivers a holding force of up to 5,000 N and a clamping force rated at 4,500 N, providing strong retention for machining and assembly operations. Can the clamp be mounted on standard fixture plates? Yes, the angle base foot is intended for secure mounting to tooling plates and fixture blocks commonly used in jigs and small production setups. Is the locking mechanism suitable for repetitive automated cycles? The safety lock is designed to prevent accidental release during repeated manual and semi-automated operations, supporting repeatable cycle performance. What is the product SKU for ordering and reference? The SKU for ordering is B213-5-D-L-C3; include this code when specifying the Kukamet vertical clamp for fixture design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5,000N Vertical Clamp, 4,500N Closing Force, M12x80 Spindle, Black Oxide Finish - Kukamet
Take advantage of the combination of high 4,500 N clamping force, compact weight and a black blued finish for dependable jigs and fixtures; order directly via Metav Werkzeuge or request guidance from our consultants for seamless integration into production. Vertikalspanner 212 – vertical clamp with 4,500 N clamping force by Kukamet A vertical clamp, Vertikalspanner 212, engineered for secure vertical workholding in jigs, fixtures and assembly stations. Robust 4,500 N clamping force High holding force 5,000 N Vertical foot mounting for fixture use Durable black blued finish Consistent clamping that keeps production moving The Vertikalspanner 212 is designed to deliver reliable clamping across repetitive cycles, providing a constant force of 4,500 N that secures workpieces without excess travel. The high holding resilience of 5,000 N reduces the risk of slippage during machining or assembly, which in turn lowers rework rates and supports predictable throughput. Where process stability is critical, a compact, repeatable clamping unit like this reduces setup variation and contributes to overall line efficiency. Easy integration into fixtures and jigs Fitted with a vertical foot for direct mounting, the clamp is intended to be incorporated into standard fixtures or modular plates with minimal modification. The M12×80 pressure spindle permits fine adjustment of contact pressure and compensates for part tolerances, enabling a secure grip on components of varying thickness. Because the unit is compact at 1.54 kg, it is suitable for both stationary and semi-automated fixtures where space and mass matter, simplifying retrofits and new designs alike. Surface and build quality that lower maintenance needs The component’s black blued finish offers corrosion resistance and an industrial appearance that masks everyday wear, extending service intervals compared with untreated parts. The lever-style actuation is robust and straightforward to operate, meaning fewer moving-part failures and easier replacement when required. Constructed for workshop environments, the clamp offers a balance of durability and low upkeep, helping to reduce machine downtime and total cost of ownership. For tailored fixture advice and reliable supply from our Emmerich warehouse, contact Metav Werkzeuge for expert guidance on incorporating the Kukamet Vertikalspanner 212 into your production set-up — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: B212-5 GTIN: 8680731507928 Manufacturer: Kukamet Facts Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.54 kg Pressure spindle: M12×80 Special features Finish: black blued Mounting: vertical foot Type: vertical clamp (lever clamp) FAQ What clamping and holding forces does this clamp deliver? The Kukamet Vertikalspanner 212 provides a clamping force of 4,500 N and a holding force of 5,000 N, suitable for many jig and fixture applications. Can the spindle be adjusted for different part thicknesses? Yes, the pressure spindle is specified as M12×80, allowing for precise adjustment to accommodate varying component heights when using the Vertikalspanner 212. Is the clamp suitable for confined fixture spaces? The unit’s compact design and 1.54 kg mass make it appropriate for tight fixturing where robust clamping is still required. Which mounting method is used for fixture attachment? The clamp is supplied for vertical foot mounting, facilitating integration into vertically oriented plates and assemblies. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000 N Hold Force Vertical Clamp 168.5mm Arm, Angle Base, Massive Holding Arm - Kukamet
Take advantage of a massive holding arm and a compact 168.5 mm reach to secure workpieces reliably; the combination of a blackened finish and robust lever action ensures longevity in production environments. The clamp’s high holding capacity, paired with a moderate actuating force, supports stable fixturing and repeatable results — order the vertical clamp directly via Metav Werkzeuge or ask the consultants for matching accessories. 213 vertical clamp with massive holding arm, 5,000 N holding force (Kukamet) 213 vertical clamp is a compact lever clamp designed for vertical holding and positioning in workshop jigs, welding fixtures and production tooling. Massive holding arm for stable fixation Holding force up to 5,000 N Angled foot for simple mounting Blackened finish for corrosion resistance 168.5 mm clamp arm for compact reach Consistent clamping performance for repeatable production The 213 vertical clamp offers clearly defined performance values that support predictable manufacturing processes. With a holding force of 5,000 N and an actuating or clamping force of 4,500 N, the device separates the functions of secure retention and lever actuation: the larger holding capacity maintains workpiece position during machining or welding while the actuation force remains manageable for manual or mechanised operation. The massive holding arm reduces deflection under load, which improves part tolerances and reduces rework. In practice, this results in fewer interruptions on assembly lines and more consistent part quality when integrated into modular fixturing systems. Space-saving mounting and reliable operation on varied fixtures Designed with an angled foot mounting the clamp installs on vertical plates and fixture faces with minimal interference to surrounding tooling. The 168.5 mm arm provides a good balance between reach and compactness, allowing close-packed clamping stations without compromising access. The blackened finish offers a degree of surface protection while also reducing glare and visual wear in busy workshops. At a mass of 1.734 kg, the unit is light enough for portable jig assemblies yet solid enough to resist vibration and mechanical shock. The lever clamp action is intuitive for operators and compatible with pneumatic or automated actuation when used in repeatable process stations. Suited applications and practical maintenance notes This lever clamp is suitable for holding, positioning and repeatable workpiece securing in welding fixtures, assembly benches and inspection jigs. The combination of a bulky arm and high holding capacity makes it particularly effective where lateral forces or vibration are present. Routine maintenance is straightforward: periodic lubrication of the pivot and visual inspection of the arm and mounting threads preserve clamping consistency. The compact mechanical design avoids complex adjustments, which shortens downtime during maintenance intervals. For integration into larger tooling systems, the model is identified by SKU B213-5-D-C2 and can be specified alongside other Kukamet components for standardised fixture design. For specification matching, spare-part queries or to order the Kukamet 213 vertical clamp through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com for personalised advice and availability. Technical Data SKU: B213-5-D-C2 GTIN: 8680731508079 Manufacturer: Kukamet Category: Spanner ECLASS: 21041717 ETIM: EC011973 Data Weight: 1.734 kg Arm length: 168.5 mm Maximum clamping (actuating) force: 4,500 N Maximum holding force: 5,000 N Special features Massive holding arm Angled foot mounting Blackened (black burnished) finish Lever clamp design Compact, workshop-ready construction FAQ What is the difference between the clamping and holding forces? The clamping (actuating) force of 4,500 N moves the lever and secures the mechanism; the holding force of 5,000 N denotes the maximum retention capacity once engaged. The Kukamet 213 vertical clamp separates actuation from retention to maintain position under load. Can the clamp be mounted on vertical fixture plates? Yes. The angled foot mounting is intended for attachment to vertical plates and fixture faces, enabling secure installation in modular jigs. Is the 213 clamp suitable for welding fixtures? Yes. The robust arm and high holding capacity make the 213 suitable for applications with vibration or lateral forces, such as welding and heavy assembly tasks. How much space does the clamp require in a packed fixture? With a 168.5 mm arm and a compact body mass of 1.734 kg, the clamp is designed for close-packed stations while maintaining access for operation and maintenance. What material finish does the clamp have and what is its benefit? The clamp features a blackened (black burnished) finish which offers surface protection and reduces glare, helping to prolong service life in industrial environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000 N Vertical Clamp 4500 N Thrust, Zinc-Plated, Right-Angle Foot - Kukamet
Take advantage of the combination of robust clamping force, galvanised corrosion protection and a compact angled base for flexible fixture setups; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Vertical Clamp 213 — galvanised lever clamp, 4,500 N clamp force The Kukamet Vertical Clamp 213 is a compact lever-style workholding solution for assembly, welding and jigging applications, offering reliable holding force with a right-angled mounting base. Galvanised construction for corrosion resistance Holding force 5,000 N for secure clamping Clamp force up to 4,500 N for solid contact Angle base mounting for flexible positioning Reliable clamping for repeatable production results The vertical design delivers a stable, repeatable hold that reduces setup time in small-batch and serial production. The holding force of 5,000 N and a clamp force up to 4,500 N are specified values that translate into dependable part retention during machining, welding or assembly. The galvanised finish resists workshop humidity and light corrosion, maintaining clamping performance over time. Where consistent workholding is critical, the lever mechanism ensures a fast, tactile lock with minimal operator adjustment. Precise adjustment and straightforward mounting Equipped with an M12x80 pressure spindle, the clamp provides fine vertical adjustment to accommodate varying workpiece heights and allow controlled contact pressure. The angle base (right-angled mounting) offers flexible positioning on fixture plates or jigs, enabling compact layouts and easy integration into existing tooling. At a mass of 1.76 kg, the component is rigid enough to resist movement while remaining simple to handle during fixture changes. These features make the clamp suitable for tight workspaces and modular jig systems. Low-maintenance design for durable workshop use Built as a classic lever clamp, the unit combines mechanical simplicity with long service life; wear parts are readily inspectable and replacement is uncomplicated. The galvanised steel body reduces the need for frequent surface treatment, and the robust construction supports repeated opening and closing cycles typical in production environments. The compact footprint and mechanical reliability make this clamp a pragmatic choice for maintenance-conscious shops seeking an economical yet effective workholding element. For tailored advice and reliable supply of Kukamet vertical clamps, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery Technical data SKU: 213-5 Model: 213 GTIN: 8680731509366 Manufacturer: Kukamet Facts Max clamp force: 4,500 N Holding force: 5,000 N Weight: 1.76 kg Pressure spindle: M12x80 Special features Galvanised material Angle base mounting (right-angled) Lever-style vertical clamp Category: Clamps / Spanner FAQ What clamping and holding forces does this clamp provide? The Kukamet vertical clamp 213 offers a clamp force of up to 4,500 N and a holding force rated at 5,000 N, making it suitable for demanding workshop tasks. Which spindle size is fitted for height adjustment? The clamp uses an M12x80 pressure spindle for fine vertical adjustment and controlled contact pressure. Is the clamp suitable for use in humid or mildly corrosive environments? Yes, the galvanised finish on the clamp provides enhanced resistance to corrosion and is appropriate for typical workshop conditions. How is the clamp mounted to a fixture or jig? Mounting is performed via the angled base (right-angled), which allows secure attachment to fixture plates and versatile positioning in jigs and assemblies. What are typical applications for this type of clamp? Common uses include assembly fixtures, welding jigs, and machining setups where a compact, reliable vertical hold is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000 N Vertical Clamp With M12x80 Pressing Spindle, Angle Base, Blackened - Kukamet
Benefit from a compact, robust clamp that combines high holding force, a 4.5 kN clamping capacity and an angled base for flexible mounting — ideal for fixtures and jigs. Order the Kukamet clamping solution directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet Vertikalspanner 213 – Vertical clamp with angled base and high holding force The Kukamet Vertikalspanner 213 is a compact vertical clamp designed for secure, repeatable holding in industrial and workshop setups. High holding force of 5 kN 4.5 kN clamping capacity for strong fixation Angled base for flexible mounting Durable blackened finish for workshop use Secure clamping where stability matters The vertical clamp delivers dependable locking capability through a defined difference between clamping force (4.5 kN) and holding force (5 kN), ensuring workpieces remain stable during machining or assembly. This distinction is important: the clamping pressure is the active force applied, while the higher holding value represents the maximum retention under load. Such performance reduces rework and scrap by maintaining part position during drilling, milling or inspection, supporting efficient process control in production environments. Flexible mounting and extended surface protection An angled base allows the clamp to be installed in confined fixtures and on angled plates, increasing adaptability within tool jigs and machine tables. The component’s blackened finish provides a protective layer that resists light corrosion and reduces glare in precision areas; this finish is a practical choice for busy workshops where both durability and operator visibility matter. The compact format and choice of mounting style simplify integration into existing clamping systems. Fast handling and straightforward adjustment for workshop workflows A spindle with M12x80 thread enables fine adjustment of contact pressure and accommodates repeatable setup heights, while the lever-clamp design referenced by the item’s trigger ensures quick engagement and release for high-throughput operations. With a weight of 1.76 kg, the unit is both robust and manoeuvrable, easing fixture changes and reducing setup time. The clamp suits industrial users, maintenance teams and specialist trades seeking reliable, repeatable clamping without excessive bulk. Choose the Kukamet Vertikalspanner 213 for consistent, space-saving clamping — order via Metav Werkzeuge and consult our team at info@metav-werkzeuge.com or +49 2822 7131930 for rapid delivery and fitting advice Technical data Article number: B213-5 Name: Vertikalspanner 213 Brand: Kukamet GTIN: 8680731508055 eClass: 21041717 ETIM: EC011973 Facts Weight: 1.76 kg Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Spindle thread: M12x80 Special features Mounting: angled base Finish: blackened finish Design: vertical / lever clamp No additional special features indicated FAQ What materials can be machined while using this clamp? The Vertikalspanner 213 from Kukamet secures components made from common workshop materials; the clamp’s robust holding capacity supports operations on metals and non-metal parts when used with appropriate jaws and fixtures. How is the clamp mounted to a fixture or machine table? Mounting is via the angled base, which enables attachment to flat or angled surfaces; the spindle specification M12x80 permits fine height adjustment during installation. Is the finish suitable for industrial environments? Yes, the blackened finish provides surface protection against light corrosion and is appropriate for standard workshop conditions, improving longevity and reducing surface reflections. Can the clamp be used for quick-change fixtures? The lever-style vertical design supports fast engagement and release, making it suitable for fixtures where repeatable, quick part changes are required. Which SKU should be ordered for this model? Order the clamp under SKU B213-5; this identifies the Kukamet Vertikalspanner 213 in our inventory. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Hold Force Vertical Clamp 120° Angle, 1500N Thrust, Blackened Finish - Kukamet
Take advantage of the combination of a 5,000 N holding arm, a defined 1,500 N clamping force and a compact, 1.18 kg design for secure, repeatable fixturing in busy workshops — order the vertical clamp directly via Metav Werkzeuge or ask the consultants for application advice. Vertikalspanner 221 — Vertical lever clamp with 5,000 N holding arm (Kukamet) The Vertikalspanner 221 is a compact vertical lever clamp designed for machine tables and jigs where secure retention and consistent clamping are required, featuring a horizontal-foot mounting for stable installation. 5,000 N holding arm for secure clamping 1,500 N maximum clamping force Horizontal-foot mounting for stable set-up Compact 1.18 kg lightweight design Secure retention for vibration-prone operations The high holding force of 5,000 N provided by the reinforced holding arm minimises slippage and accidental release under dynamic loads. Because the retention mechanism is engineered to resist pull-off forces well above the applied clamping force, the clamp maintains workpiece position during machining or assembly, reducing rework and inspection cycles. The robust retention also supports more aggressive cutting parameters where consistent fixturing is critical. Predictable clamping performance for consistent results With a rated clamping force of 1,500 N and a 120° operating range, the clamp delivers reproducible force with every actuation, improving batch-to-batch consistency. The horizontal foot mounting ensures a low-profile, rigid connection to fixtures and plates, which translates into narrower tolerances on critical dimensions. For process planners, this means fewer set-up iterations and a clearer relationship between clamping geometry and part quality. Space-saving design that fits versatile fixtures Weighing 1.18 kg, the clamping unit offers a favourable stiffness-to-weight ratio that keeps fixtures compact without sacrificing strength. The lightweight construction simplifies handling during jig assembly and allows multiple units to be integrated without overloading positioning elements. Where footprint and modularity matter, this lever clamp supports flexible layouts and fast reconfiguration of production tooling. Durable finish and straightforward integration The blackened finish provides corrosion resistance and a non-reflective surface that suits workshop environments. The clamp’s geometry and standardised mounting make it straightforward to include in custom jigs or modular clamping systems; part numbers and identifiers such as SKU 221-4-C and GTIN 8682843520383 assist in procurement and inventory. For customers requiring assistance with fixture design or selection, Metav’s application advisers can provide technical guidance and compatibility checks. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertikalspanner 221 into production jigs — request application support or a specification check from our Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 221-4-C GTIN: 8682843520383 eClass: 21041717 ETIM: EC011973 Manufacturer: Kukamet Facts Weight: 1.18 kg Holding force: 5,000 N Clamping force: 1,500 N Angle: 120° Special features Finish: blackened finish Mounting: horizontal foot Holding arm with 5,000 N holding force Type: vertical lever clamp FAQ What is the difference between holding force and clamping force on this clamp? The Vertikalspanner 221 specifies a holding force of 5,000 N, which indicates the retention capacity of the holding arm, and a clamping force of 1,500 N, which represents the applied compressive force; the larger holding rating ensures secure retention under lateral or tensile loads. How is the clamp mounted to a fixture or table? Mounting is via a horizontal foot, allowing rigid, low-profile fixation to plates and jigs consistent with typical fixture layouts for vertical lever clamps. Can this clamp be used in compact, multi-clamp setups? Yes — the 221’s 1.18 kg mass and compact footprint make it suitable for multi-clamp arrangements where space and weight are limited while maintaining repeatable clamping. What finish does the clamp have and why is that relevant? The unit features a blackened finish, offering improved corrosion resistance and a matte surface that reduces glare and wear in workshop conditions. Is the operating angle suitable for standard lever clamp actions? The clamp operates across a 120° angle, providing a broad actuation range that accommodates common lever motions and ergonomic handle paths. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Hold Force, 4500N Clamping Force 168.5mm Vertical Clamp With Angular Base, Galvanised, Massive Arm Safety Lock - Kukamet
Taking advantage of a robust combination of a heavy-duty holding arm, safety lock and zinc-plated finish ensures reliable clamping and minimal downtime in production and fixture work; order the clamp via Metav Werkzeuge or request technical advice from our consultants for integration into existing jigs. Kukamet 213 Vertical Clamp — Zinc-plated angle-base clamp with 5,000 N holding force The 213 vertical clamp is a compact, angle-base clamping solution designed for secure workholding in jigs, fixtures and assembly stations. Heavy-duty holding arm with safety lock Zinc-plated corrosion protection Angle-base mounting for versatile fit Up to 5,000 N holding force Reliable clamping power for stable production The clamp delivers a holding force of 5,000 N with a maximum pressing force of 4,500 N, providing stable retention of workpieces during machining or assembly. High holding and pressing figures translate into reduced part movement and fewer reworks, which improves process reliability. The distinction between the two values is practical: the pressing force indicates the actuation thrust, while the holding force indicates the retained load under shear and vibration — both metrics are decisive when specifying a clamp for a fixture. Robust construction that reduces maintenance Constructed with a zinc-plated finish and a heavy-duty arm, the device resists corrosion in busy workshop environments and requires minimal upkeep. The integrated safety lock prevents unintended release of the clamping lever, supporting safe operation where repeated actuations occur. With an overall mass of 1.64 kg and an arm length of 168.5 mm, the clamp balances compact dimensions with mechanical sturdiness, making it suitable for confined fixture layouts without sacrificing durability. Quick mounting and straightforward integration into jigs The angle-base mounting allows adaptable installation on plates and brackets, simplifying retrofit into existing jigs and assembly fixtures. Its compact footprint facilitates space-saving layouts and predictable clamp travel, enabling consistent clamping cycles in automated or manual stations. Identification and procurement are straightforward thanks to the SKU and GTIN information provided in the technical data, which supports inventory control and traceability in production environments. Contact Metav Werkzeuge for advice on specifying the Kukamet 213 vertical clamp from our Emmerich warehouse and receive application-focused guidance from our workshop specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 213-5-D-L-C2 GTIN: 8680731502152 Brand: Kukamet Type: Vertical clamp Facts Max holding force: 5,000 N Max pressing force: 4,500 N Arm length: 168.5 mm Weight: 1.64 kg eClass: 21041717 ETIM: EC011973 Special features Zinc-plated material Angle-base (Winkelfuß) mounting Massive holding arm and safety lock Suitable for fixtures and jigs Category: Spanner FAQ What is the maximum holding capacity of this clamp? The Kukamet 213 vertical clamp provides a holding force of 5,000 N, with a maximum pressing force of 4,500 N for actuation. Is the clamp suitable for use in corrosive workshop environments? Yes. The clamp is zinc-plated, offering corrosion resistance suitable for general workshop and fixture use. How large is the clamping arm and how heavy is the device? The arm length is 168.5 mm and the clamp weighs 1.64 kg, which balances compact installation with robust handling. What mounting method does the clamp use? The device features an angle-base mounting (Winkelfuß), enabling flexible fitting to plates and brackets in jigs and fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Vertical Clamp 168.5mm Arm, Massive Holding Arm with Safety Lock, Blackened Finish - Kukamet
Take advantage of a robust combination of high holding force and a secure locking system to keep production running reliably; the compact design and angled base also simplify fixture integration. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Vertical clamp 213 – vertical toggle clamp with 5,000 N holding force by Kukamet The Vertical clamp 213 is a vertical toggle clamp designed for secure workpiece fixation in jigs, fixtures and small-series production environments Robust holding arm with safety lock Max holding force 5,000 N for secure fixation Black oxide finish for corrosion resistance Angled base for stable mounting Consistent clamping power for machining setups The clamp delivers dependable holding force values—5,000 N maximum holding force and up to 4,500 N clamping/pressing force—ensuring repeatable fixation for machining and assembly tasks. The elongated 168.5 mm arm provides reach into fixtures where a short lever would be inconvenient, enabling firm contact without repeated adjustments. These measurable performance figures support process stability and reduce setup time in batch production, translating technical capacity directly into increased operational efficiency. Secure installation and protected operation Equipped with a safety locking mechanism and mounted on an angled base, the clamp prevents accidental release during handling and machining. The locking device secures the lever in the closed position, reducing the risk of sudden unclamping under vibration. The angled base simplifies alignment on vertical or inclined fixture plates and helps distribute forces into the workholding structure, lowering the likelihood of movement or slippage during operations. This combination improves operator confidence and reduces rework. Compact, resilient design for daily workshop use The unit combines a robust holding arm with a black oxide finish that adds corrosion resistance without bulk. Weighing 1.64 kg, the clamp is compact enough for modular jig systems yet substantial enough to withstand regular use. The solid construction and finish decrease the need for frequent replacement, supporting a long service life in standard workshop environments. The design balances durability and manageable dimensions to suit both production lines and maintenance benches. Contact Metav Werkzeuge for tailored integration advice on the Kukamet vertical clamp 213 and to request technical support or a quotation from our Emmerich-based specialists. Technical Data Article number: B213-5-D-L-C2 Manufacturer: Kukamet Category: Clamps Weight: 1.64 kg Performance Data Max holding force: 5,000 N Max clamping/pressing force: 4,500 N Arm length: 168.5 mm Features & Materials Mounting: angled base Finish: black oxide finish (schwarz brüniert) Robust holding arm (massiver Haltearm) Safety locking mechanism (Sicherheitsverriegelung) FAQ What materials can this clamp be used with? The Vertical clamp 213 is a mechanical clamping element suitable for use with a wide range of workpieces in jigs and fixtures; material compatibility depends on the fixture design rather than the clamp itself. How is the clamp fixed to a fixture plate? Mounting is via the angled base; the base is designed for secure bolting to plates or brackets and aids in aligning the clamp for vertical applications. How does the safety locking mechanism work? The integrated safety lock secures the lever in the closed position to prevent accidental opening during machining; the mechanism is mechanical and designed for industrial duty cycles. Is the clamp suitable for high-vibration environments? Yes. The combination of the robust holding arm and the safety locking mechanism reduces the risk of slippage under vibration, making it appropriate for many production settings. What is the article number for ordering or spare parts? The SKU for ordering is B213-5-D-L-C2; use this identifier when referring to the Kukamet vertical clamp model 213 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Vertical Clamp 218.5mm Massive Arm, Safety Lock, Zinc-Plated – Kukamet
The combination of a galvanised finish, a massive holding arm with safety lock and a reliable 4,500 N clamping force ensures robust, repeatable workholding in production environments; order the 213 vertical clamp directly via Metav Werkzeuge or consult our technical advisors for application guidance. 213 vertical clamp by Kukamet — galvanised, 4,500 N clamping force A galvanised 213 vertical clamp with an angle base, designed for secure workholding and fast set-up in workshop and light industrial production. Galvanised construction Massive holding arm with safety lock Clamping force 4,500 N Arm length 218.5 mm Secure retention that reduces rework and downtime The 213 vertical clamp delivers consistent retention by combining a high clamping force of 4,500 N with a holding force rated at 5,000 N. In practical terms, the clamping force denotes the active force applied during actuation, while the holding force indicates the static resistance to part movement once locked. This distinction matters on production lines where vibration or machining forces can cause movement; the result is fewer rejects and lower rework rates. The galvanised body contributes to long-term dimensional stability under typical workshop conditions, maintaining repeatable performance over many cycles. Fast mounting and precise positioning for series work Mounted on an angle base, the clamp is optimised for quick installation to jigs, plates or fixtures when a vertical hold is required. The massive holding arm with safety lock provides a clear mechanical engagement that secures components immediately after actuation, enabling reliable indexing and uncomplicated cycle integration. With an arm length of 218.5 mm and a compact overall mass of 1.64 kg, the unit balances reach and rigidity without occupying excessive fixture space. These attributes make the clamp suitable for repetitive tasks where quick set-up and repeatability are priorities. Durable finish and low-maintenance operation The galvanised surface finish offers effective corrosion protection in workshop environments, reducing the need for frequent surface maintenance and extending service intervals. The simple mechanical design minimises wearing parts, and the visible safety latch provides clear confirmation of locked status during handling and inspection. As a workshop-ready clamping element, the device supports a compact fixture layout while preserving operator safety and component integrity through secure mechanical locking. Choose the Kukamet 213 vertical clamp for dependable workshop clamping and contact Metav Werkzeuge for procurement or technical advice: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical data Article number: 213-5-D-L-C3 GTIN: 8680731502169 EClass: 21041717 ETIM: EC011973 Core data Weight: 1.64 kg Arm length: 218.5 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Special features Material: Galvanised Mounting: Angle base Special: Massive holding arm and safety lock FAQ What maximum clamping force does the clamp provide? The Kukamet 213 vertical clamp provides a maximum clamping force of 4,500 N and a holding force of 5,000 N. Can the clamp be mounted on a fixture plate or jig? Yes, the unit is designed for an angle base mounting and can be secured to fixture plates or jigs for vertical workholding. What are the arm length and the unit weight? The clamp has an arm length of 218.5 mm and a weight of 1.64 kg, balancing reach with compact handling. Does the device include a safety mechanism? The design incorporates a massive holding arm with an integrated safety lock to secure the clamping position mechanically. What finish does the clamp have and what are the benefits? The clamp is galvanised, offering corrosion resistance and reduced maintenance for workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Vertical Clamp With Safety Lock, Horizontal Foot, Blackened Finish - Kukamet
Take advantage of the combination of secure locking, compact design and measurable clamping performance to keep production processes steady and repeatable. The robust vertical clamp delivers 4.5 kN clamping force with a 5.0 kN holding force, mounted via a horizontal foot for straightforward integration. Order the clamp directly via Metav Werkzeuge or consult the advisers for technical clarification. 211 Vertical clamp by Kukamet — 4.5 kN clamping force, safety lock 211 is a vertical clamping device for secure workholding in production and workshop applications, featuring a horizontal foot and an integrated safety lock. 4.5 kN clamping force 5.0 kN holding force Horizontal foot mounting Safety lock for secure clamping Consistent, measurable clamping performance for serial work The vertical clamping solution provides a defined clamping force of 4,500 N and a holding force of 5,000 N, offering reproducible results in repetitive operations. The drive uses an M12x80 pressure spindle, enabling controlled force transmission and simple read-across for process planning. These measurable values support process stability and help to compare fixture options objectively, reducing downtime caused by uncertain clamping behaviour. Compact mounting and durable surface for tight spaces Designed for space-conscious setups, the clamping unit mounts on a horizontal foot, allowing low-profile attachment to plates and jig bases. With a mass of 1.54 kg and a blackened finish, the clamp combines low weight with a protective surface treatment that is industry-typical for workshop equipment. The integrated safety lock secures the lever position during machining, preventing unintentional release and contributing to workplace safety without additional auxiliary parts. Practical integration and clear maintenance demands The lever-style mechanism suits frequent manual actuation in production cells and assembly benches; the compact form factor eases placement within multi-clamp fixtures. Basic maintenance consists of inspection of the spindle and locking mechanism; the M12x80 pressure spindle can be referenced directly when sourcing spare parts. For teams managing fixture layouts, the clamp’s clear technical metrics simplify load calculations and fixture design choices while supporting efficient workflows. Contact Metav Werkzeuge to arrange supply or a technical consultation on fitting the Kukamet 211 vertical clamp into existing jigs and fixtures Technical data Article number: B211-5-L GTIN: 8680731507805 Model: 211 Facts Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.54 kg Pressure spindle: M12x80 Special features Horizontal foot mounting Safety lock Blackened finish Vertical clamp / lever clamp design FAQ What clamping and holding forces does this clamp provide? The Kukamet vertical clamp delivers a clamping force of 4,500 N and a holding force of 5,000 N as stated for the model B211-5-L. How is the clamp mounted to a fixture or jig? Mounting is via a horizontal foot; the design allows low-profile attachment to plates and jig bases for compact fixture layouts. Is a safety mechanism included to prevent accidental release? Yes, the unit features an integrated safety lock that secures the lever position during machining and handling. What spindle specification should be referenced for spare parts? The clamp uses an M12x80 pressure spindle; this designation is suitable when ordering spares or planning maintenance. Is the surface treatment suitable for workshop environments? The clamp is supplied with a blackened finish that provides a durable surface typical for workshop equipment and handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5000N Vertical Clamping Toggle Clamp Horizontal Base Zinc-Plated, 4500N Thrust - Kukamet
Take advantage of a durable galvanised construction combined with precise clamping performance — 5,000 N holding force and 4,500 N pressing force ensure secure workholding while the compact 1.54 kg body keeps fixture loads low. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 211 vertical clamp (Vertical toggle clamp) by Kukamet — galvanised, horizontal base 211 vertical clamp is a vertical toggle clamp designed for secure, repeatable workholding in fixtures and jigs where a horizontal mounting foot is required. Galvanised steel finish for corrosion resistance Holding force up to 5,000 N Actuating spindle M12x80 for adjustable pressure Compact weight 1.54 kg for easy integration Built to endure: corrosion protection and compact construction The galvanised finish provides reliable corrosion resistance, reducing maintenance and extending service life in workshop environments. With a compact weight of 1.54 kg, the unit minimises added mass on tooling plates and pallets, supporting agile fixture design and easier handling during setup. The robust zinc coating is suited to general industrial conditions, delivering longevity without complex upkeep and ensuring sustained performance on the shop floor. Precise, measurable clamping for safe production cycles A clearly defined holding force of 5,000 N and maximum pressing force of 4,500 N give quantifiable assurance when securing components during machining or assembly. The adjustable M12x80 actuating spindle enables fine tuning of contact pressure, allowing the clamp to be set for delicate parts or heavier workpieces as required. These numeric specifications support process planning and risk assessment by translating clamping performance into verifiable data for repeatable production. Simple mounting and integration for flexible fixtures The horizontal mounting foot simplifies retrofitting into existing jigs and fixture plates, reducing downtime when replacing or upgrading clamps. Designed as a toggle clamp, the mechanism offers a compact footprint and reliable repeatability for batch runs and single-piece flow alike. Its straightforward geometry accommodates standard fixture hole patterns and leaves room for parallel tooling; accessories are not required for basic installation, and the unit’s neutral design fits diverse applications from assembly to light machining. For personalised advice on integrating the 211 vertical clamp into production fixtures, contact Metav Werkzeuge in Emmerich — technical guidance and order handling are available by phone or e‑mail. Technical data SKU: 211-5 GTIN: 8680731501391 Model designation: 211 Manufacturer: Kukamet Facts Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Weight: 1.54 kg Actuating spindle: M12x80 Special features Material: galvanised steel Mounting type: horizontal base Arm: not applicable Category: toggle clamp (vertical) FAQ What clamping forces can be expected from this clamp? The 211 vertical clamp provides a maximum pressing force of 4,500 N and a holding force of 5,000 N, offering measurable values for planning secure workholding. Is the spindle adjustable and what are its dimensions? Yes — the actuating spindle is M12x80, enabling adjustment of contact pressure to suit different workpiece requirements. Can this clamp be mounted on standard fixture plates? The clamp uses a horizontal mounting foot, making it compatible with typical fixture plate hole patterns and allowing straightforward retrofitting. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Horizontal Clamp With Angle Base Variable Open Holding Arm, M8×55 Pressure Screw, 3000N - AMF
Take advantage of the combination of high clamping force, flexible mounting and automatic height compensation for reliable fixture performance; order the unit via Metav Werkzeuge or contact our consultants for specification support. Horizontal clamp No. 6871 (Size 50) – angled foot, 3,000 N clamping force | AMF A Horizontal clamp No. 6871 for secure hold-down in fixture and jig applications, offering a variable open holding arm and an angled foot for versatile mounting in machining setups. 3000 N maximum clamping force Variable open holding arm Automatic height compensation 35–40 mm Angled foot for flexible mounting Accurate clamping that maintains process stability The clamp delivers a maximum clamping force of 3,000 N, ensuring steady workpiece fixation under typical machining loads. The benefit is a measurable reduction in micro-movement during milling and drilling, which translates into repeatable tolerances and fewer rejects. The design focuses on functional reliability: the core mechanism provides consistent pressure while the compact footprint preserves access to the workpiece. This makes the clamp suitable for production jigs and small-batch fixtures where stability and throughput are priorities. Flexible mounting and straightforward height compensation Installation is simplified by the angled foot and the automatic height compensation of 35–40 mm, allowing the clamp to adapt to slight variations in workpiece height without manual shimming. The unit includes an M8 x 55 clamping screw and a range of dimensional references (for example A = 8.4 mm, B = 85 mm, C = 22–32 mm) that enable precise positioning in fixture plates. This flexibility reduces set-up time and supports quicker changeovers between components, improving overall machine utilisation and workflow efficiency. Open holding arm design for accessible workpiece loading The variable open holding arm facilitates easy loading and unloading of parts while maintaining a secure hold during machining. By combining accessibility with a robust hold-down function, the clamp reduces handling time and minimises the risk of collision with tooling. The adjustable clamping range (HW min. 1 mm to HW max. 31 mm) covers a wide span of part geometries, making the device a practical choice for mixed-production environments where adaptability matters. Durable construction for dependable everyday use Built for routine shop-floor conditions, the clamp is engineered for longevity and low maintenance. Key functional elements such as the automatic compensating mechanism and the solid clamping interface are designed to withstand repeated cycles without loss of performance. The clear numerical specifications and simple mechanical concept support predictable maintenance planning, which contributes to uninterrupted production and reliable throughput over time. For secure procurement and fast, reliable delivery, order the AMF Horizontal clamp No. 6871 via Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm suitability for the intended application Technical data Article number: 4123572012NW Type: 6871 Name: Horizontal clamp No. 6871 Size 50, angled foot (AMF) Product type: Horizontal clamp Manufacturer: AMF Packaging unit: 1 Facts Maximum clamping force: 3000 N A: 8.4 mm B: 85 mm C: 22–32 mm D / D1: 6.5 mm E: 35 mm F: 37 mm H: 88 mm H1: 124 mm H2: 158 mm HW min.: 1 mm HW max.: 31 mm I: 13 mm K: 10.6 mm L1: 244 mm M: 38.1 mm N: 57 mm P: 51 mm Automatic height compensation S: 35 mm Maximum height compensation: 40 mm Clamping screw: M8 x 55 Special features Variable execution; open holding arm; angled foot Size: 50 Designed for fixture and jig clamping applications Compact footprint with high clamping capability Clear dimensional references for accurate integration FAQ What clamping force does this device provide? The clamp provides a maximum clamping force of 3,000 N, making the AMF Horizontal clamp No. 6871 suitable for standard machining fixture duties. How much height variation can the clamp compensate for? The unit features automatic height compensation with an effective S of 35 mm and a maximum compensation of 40 mm, enabling adaptation to small workpiece height differences. Which clamping range is supported by the holding arm? The adjustable clamping range is from HW min. 1 mm to HW max. 31 mm, allowing the clamp to secure a variety of part thicknesses in production jigs. Which mounting and fixing elements are included in the specification? Dimensional details include an M8 x 55 clamping screw and multiple reference measurements (for example L1 = 244 mm, H = 88 mm) to assist correct fixture integration for the Horizontal clamp No. 6871 (AMF), SKU 4123572012NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Horizontal Clamp With Automatic Height Adjustment, 2.5 kN Clamping Force, Group 50 - BESSEY
Combining automatic height compensation with a reliable 2,500 N clamping force ensures repeatable, secure holds and a smooth workflow in batch and one-off machining. Benefit from robust horizontal support and straightforward integration in existing jigs; order directly via Metav Werkzeuge or consult our specialists for application advice. STC-HH50 horizontal clamp (size 50) — BESSEY STC-HH50 is a horizontal clamp designed for workshop and industrial fixturing, offering automatic clamping height adjustment and a compact horizontal base plate for secure workholding. Automatic clamping height adjustment 2,500 N maximum clamping force Horizontal base plate design Compact size 50 for flexible fixturing Consistent performance through controlled clamping force The unit delivers a 2,500 N clamping force, which provides a clear, measurable parameter for process planning and fixture design. This defined force reduces variability between cycles and supports predictable machining results. The automatic height adjustment mechanism converts uneven workpiece heights into consistent clamp pressure, reducing set-up time and lowering the risk of over‑ or under‑clamping. Such repeatability benefits production lines and manual workshops seeking efficient, reliable workholding. Space-saving design with precise dimensional data The compact construction and horizontal base plate optimise bench and fixture space. Key dimensions — L1 217 mm, M 33–48 mm and A 13 mm — permit easy integration into existing clamping systems and bespoke jigs. These metrics allow planners to calculate clearances and stroke requirements without guesswork. The practical size classification (size 50) indicates the clamp’s intended duty range, making specification straightforward when comparing alternatives for a given application. Practical advantages for workshop and industrial use Built for routine use, the clamp suits repetitive assembly, light machining and general fixturing tasks where a dependable horizontal hold is required. The automatic height compensation shortens set-up for varied stock thicknesses, while the horizontal orientation stabilises flat and prismatic parts during operations. Supplied as a single unit, the device supports modular fixture concepts and rapid changeovers, improving throughput and reducing fixture complexity. Contact Metav Werkzeuge for detailed application support and fast procurement of BESSEY horizontal clamps; our specialists at Metav Werkzeuge can advise on best practices and supply from stock. Technical data Article number: 4000831134NW Type: STC-HH Label: Waagrechtspanner STC-HH50 Gr.50 waagrechte Grundpl. BESSEY Manufacturer: BESSEY Packaging unit: 1 Core specifications Max clamping force: 2,500 N Size: 50 L1: 217 mm M: 33–48 mm A: 13 mm B: 77 mm C: 25.4 mm E: 40 mm H1: 27 mm I: 14 mm N: 60 mm P: 53 mm Features and applications Automatic clamping height adjustment Horizontal base plate design Suitable for workshop and industrial fixturing Supplied as single unit FAQ What is the maximum clamping force of this horizontal clamp? The BESSEY STC-HH50 horizontal clamp provides a maximum clamping force of 2,500 N, suitable for secure holding in many workshop and light industrial applications. How does the automatic height adjustment benefit set-up times? The automatic clamping height adjustment on the STC-HH50 compensates for variations in stock thickness, reducing manual shimming and accelerating fixture set-up for repeatable cycles. Which dimensions are most relevant for integrating the clamp into a jig? Key dimensions to consider are L1 217 mm and M 33–48 mm, together with A, B and C (shown in the technical data), which define mounting space and effective stroke for the clamp. Is the clamp delivered ready for immediate installation? The STC-HH50 is supplied as a single unit; mounting and installation depend on the chosen fixture design and any additional fasteners or adaptors required for the specific setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Push Rod Clamp Heavy Duty Tension/Compression Clamp 25kN Holding Force - AMF
Combine heavy‑duty size 7 construction, 25,000 N clamping capacity and a 50 mm stroke for reliable, repeatable fixture clamping; order the AMF push‑pull rod clamp directly via Metav Werkzeuge or consult our specialists for application support. AMF Push‑pull Rod Clamp Nr.6842, Size 7 (Heavy‑duty) — 25,000 N, 50 mm stroke The AMF Push‑pull Rod Clamp Nr.6842 is a heavy‑duty compression and tension clamp intended for industrial workholding and fixture applications where high holding forces and repeatable positioning are essential Heavy‑duty push/pull clamp, size 7 25,000 N maximum clamping force 50 mm stroke for deep engagement M12 x 50 pressure screw fitted Secure, high‑force clamping for repeatable production With a rated max. clamping force of 25,000 N and equal holding capacity, this rod clamp provides a measurable increase in fixture security compared with lighter devices. The combination of high force and 50 mm stroke reduces slippage under machining loads and improves repeatability of parts from batch to batch. Designed for demanding production environments, the unit supports stable machining, drilling and light milling operations by keeping components immobile during cycle times. Emphasis on measurable figures simplifies planning and risk assessment in process documentation. Fast adjustment and straightforward integration into jigs The clamp offers practical adjustability via an M12 x 50 pressure screw and a compact footprint in size 7, enabling simple setting of contact pressure and travel without complex tooling changes. Minimum and maximum flank dimensions (B min / B max) permit flexible positioning in bespoke fixtures; this reduces set‑up time and shortens changeover intervals. The mechanical interface is suitable for standard locating schemes, allowing rapid retrofit into existing clamping plates or custom jigs while preserving machine availability and throughput. Built for continuous shopfloor use — confidence in every cycle Specified as a heavy execution, the design prioritises durability under repeated load cycles. The robust mechanism and conservative force rating contribute to lower maintenance frequency and predictable service intervals, which translates into fewer unscheduled stops and a steadier production rhythm. For manufacturing teams, this reliability means less rework and improved delivery predictability, building operational confidence that supports long‑term production planning. Practical selection notes to match process requirements Selection should be guided by the required holding force and stroke rather than by brand alone; the 25,000 N rating and 50 mm travel make this clamp suitable where strong retention and moderate travel are required. Key dimensions such as A, C, H1 and L1 allow verification against fixture envelopes before purchase. If uncertainty remains over compatibility with a particular jig or machining sequence, technical consultation is recommended to ensure the clamp meets cycle, load and access constraints. For robust, high‑force clamping choose the AMF Nr.6842 — contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4123680170NW Type: 6842 Brand: AMF Product: Push‑pull rod clamp (Schubstangenspanner) Nr.6842, size 7 Execution: heavy Packaging unit: 1 Facts Max. pressing force: 25,000 N Max. holding force: 25,000 N Stroke: 50 mm Pressure screw: M12 x 50 A: 22 mm B min: 59 mm B max: 105 mm C: 70 mm D: 11 mm E: 50 mm H: 55 mm H1: 179 mm K: 45 mm L1: 218 mm M min: 57 mm M max: 65 mm N: 93 mm P: 158 mm Special features Heavy execution for industrial use Compression and tension (push/pull) function Size 7 for compact fixtures M12 x 50 adjustable pressure screw Suitable for repeatable clamping tasks Single‑unit packaging FAQ What is the maximum clamping force of this clamp? The AMF Push‑pull Rod Clamp Nr.6842 provides a maximum clamping and holding force of 25,000 N. What stroke length does the clamp offer? The clamp has a 50 mm stroke, enabling deeper engagement and compensation for part variation. Is the clamp suitable for both compression and tension applications? Yes — the device is specified as a compression/tension (push/pull) clamp and is intended for both holding and pressing tasks. How is clamping pressure adjusted? Adjustment is via an M12 x 50 pressure screw and by setting the available travel within the B min/B max range to suit the fixture geometry. Which size is this clamp and how compact is it for fixtures? This is a size 7 unit with compact external dimensions such as L1 = 218 mm and A = 22 mm, designed for integration into space‑constrained jigs Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Toggle Clamp Vertical Base Zinc Plated With Hook, 1500N Thrust/1800N Hold - Kukamet
Take advantage of the combination of robust holding performance, corrosion-resistant zinc-plated construction and easy adjustability for reliable, repeatable clamping in production and workshop fixtures; order directly via Metav Werkzeuge or consult our technical team for application support. Kukamet 412 Latch Clamp — Vertical-foot, zinc-plated with hook engagement, 1.8 kN holding force Kukamet 412 is a compact latch clamp designed for secure fastening in fixtures and jigs, combining a vertical-foot mounting with a hooked engagement for rapid, repeatable closures. Vertical-foot mounting for stable installation Zinc-plated finish for basic corrosion protection 1,800 N holding force for secure locking 50 mm adjustable threaded spindle Proven performance for secure fixtures The latch unit delivers measurable reliability: a 1,500 N clamping force paired with a 1,800 N holding force provides a clear safety margin for repeatable closures in production environments. The 50 mm threaded spindle allows straightforward fine adjustment of the clamping gap, enabling consistent contact pressure across workpieces. Such quantifiable performance reduces rework and supports a predictable setup time on assembly stations. Simple installation and fast, repeatable operation Engineered for efficient mounting, the vertical-foot configuration provides a compact footprint and stable attachment to fixture plates. The clamp is supplied with hook, ensuring positive engagement and preventing unintended release under vibration. At 0.21 kg, the unit is lightweight yet robust, simplifying handling during installation and facilitating modular fixture designs where rapid reconfiguration is required. Durable, low-maintenance design for daily workshop use A zinc-plated finish gives the clamp basic resistance to surface corrosion, extending service life in standard workshop conditions while keeping maintenance demands low. The straightforward mechanical design supports longevity and uncomplicated repair when required, making this latch an effective choice for production lines and small-batch manufacturing where reliability and rapid repeatability matter. Metav Werkzeuge’s supply from Emmerich ensures consistent product quality and dependable stock availability. Contact Metav Werkzeuge for tailored technical advice and dependable supply of the Kukamet 412 latch clamp — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and fast delivery from Emmerich Technical data Article number: 412-2 GTIN: 8680731502558 Designation: Latch clamp 412 by Kukamet Mounting: vertical foot Facts Weight: 0.21 kg Max clamping force: 1,500 N Max holding force: 1,800 N Thread length: 50 mm Special features Material: zinc-plated steel With hook eClass: 21041718 ETIM: EC011973 Category: Clamping tools FAQ What clamping and holding forces are specified for this clamp? The Kukamet 412 latch clamp (SKU 412-2) specifies a clamping force of up to 1,500 N and a holding force of up to 1,800 N. How is the clamp mounted and adjusted? Mounting is via a vertical foot; adjustment is made using the 50 mm threaded spindle supplied for fine tuning of the clamping position. Is the clamp suitable for use in humid workshop conditions? The clamp is zinc-plated, which provides basic corrosion protection for typical workshop environments; for aggressive or outdoor exposures additional protection is recommended. Does the clamp include a hook for positive engagement? Yes, the unit is supplied with a hook engagement to ensure secure latching and resistance to unintentional release. How heavy is the clamp and what does that mean for fixture design? At 0.21 kg the clamp is lightweight, which supports modular fixture layouts and simplifies handling during installation or reconfiguration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Vertical Clamp Automatic Height Adjustment, 2,500 N - BESSEY
Take advantage of a compact, workshop-ready solution that combines automatic clamp height adjustment with a reliable 2,500 N clamping force for consistent part retention; order directly via Metav Werkzeuge or consult the team for specification matching. BESSEY STC-VH Group 50 Vertical Clamp – automatic clamp height adjustment, horizontal base The BESSEY STC-VH Group 50 vertical clamp is a compact clamping device with a horizontal foot designed for stable mounting in fixtures and jigs; ideal for repeatable positioning and secure clamping in metalworking and general workshop applications. Automatic clamp height adjustment Max clamping force 2,500 N Horizontal base for flat mounting Size 50 with H1 = 162 mm Consistent, measurable clamping performance for production use The vertical clamping mechanism delivers a maximum clamping force of 2,500 N, ensuring secure retention of workpieces during machining, welding or assembly processes. The automatic clamp height adjustment compensates for minor variations in component thickness, reducing setup time and the need for shims. For procurement and shop-floor planners, the combination of precise force rating and self-adjusting height translates into fewer interruptions, less rework and a predictable throughput rate. Technical novices benefit from a simple performance indicator: higher Newton values mean firmer hold; this model offers industrial-grade holding power in a compact footprint. Quick installation and stable mounting reduce downtime Fitted with a horizontal base, the clamp is intended for flat mounting on worktops, plates or modular fixturing systems, enabling a rapid mechanical interface with common workshop fixtures. The Size 50 designation and the H1 dimension of 162 mm give a clear reference for integration into existing set-ups and CAD layouts. Fast mounting and predictable geometry shorten the time between design and production, while the modest mass of 0.43 kg per unit keeps handling and changeover simple. The overall result is improved operational efficiency: fewer steps to secure a part and faster transitions between operations. Robust, straightforward design for everyday reliability Built for regular workshop use, the unit combines durability with uncomplicated maintenance: the automatic height-compensation function eliminates frequent manual adjustments, and the compact construction withstands the rigours of daily handling. The clamp’s straightforward mechanism helps minimise training needs for operators and supports consistent process quality. Where traceable performance matters, the clear values for clamping force and H1 height allow engineering teams to specify fixtures with confidence and document expected results for quality control. Choose the BESSEY STC-VH Group 50 vertical clamp for dependable clamping performance and straightforward integration — contact Metav Werkzeuge for tailored advice or to confirm fitment for existing fixtures. Technical data Article number: 4000831137NW SKU: 4000831137NW Type: STC-VH Product type: Vertical clamp Label: Senkrechtspanner STC-VH Gr.50 horizontal foot BESSEY Manufacturer: BESSEY Packaging unit: 1 Weight: 0.43 kg Core technical data Maximum clamping force: 2,500 N Size: 50 H1: 162 mm Special features Automatic clamp height adjustment Horizontal base (waagrechter Fuß) Compact workshop mounting design FAQ What clamping force can be expected from this clamp? The BESSEY STC-VH Group 50 vertical clamp provides a maximum clamping force of 2,500 N, suitable for secure retention in many metalworking and assembly tasks. Is the clamp suitable for variable workpiece thicknesses? Yes, the automatic clamp height adjustment built into the STC-VH allows compensation for minor variations in part height without manual shim work. How is the clamp mounted? The unit features a horizontal base for flat mounting on plates or fixture rails; the Size 50 and H1 = 162 mm dimensions simplify integration into existing setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
51.5-81.5mm Clamping Locking Spindle With Spring, 500N Thrust, 725N Holding Force, Black Oxide - Kukamet
Take advantage of a compact, spring-loaded closure that delivers a holding force of 725 N and a clamping force of 500 N for reliable fixture security; order the B311-5-Y toggle latch clamp directly via Metav Werkzeuge or consult our specialists for application advice. B311-5-Y Toggle latch clamp — spring-loaded, hook, horizontal base (Kukamet) The B311-5-Y is a spring-loaded toggle latch clamp designed for secure and repeatable fastening in jigs, fixtures and small production tooling where quick engagement and a compact footprint are required. Spring-loaded toggle action for reliable closure Horizontal-foot mounting for stable bench fixing Hook connection with adjustable arm 51.5–81.5 mm Holding force 725 N and clamping force 500 N Secure, repeatable clamping for production tasks The robust toggle mechanism provides a predictable clamping force and holding force, specified at 500 N and 725 N respectively, which translates into consistent part retention during machining, assembly or inspection cycles. In practical terms, clamping force denotes the pressure applied to the workpiece to perform secure fixing, while holding force describes the maximum resistance to separation once the clamp is engaged. This differentiation helps planners select a closure that meets both static and dynamic process requirements without over‑specifying hardware. Fast installation and straightforward adjustment to save setup time Equipped with a horizontal foot for bench or platen mounting and an adjustable arm ranging from 51.5 mm to 81.5 mm, the clamp offers simple alignment and repeatable positioning in fixtures. The 110 mm thread length permits fine tuning of the hook engagement, enabling quick setup changes between different workpiece heights. Because of its compact mass (approx. 0.98 kg), integration into mobile jigs or modular tooling is uncomplicated, reducing overall changeover time and improving line efficiency. Durable mechanism with a spring for secure engagement The unit’s spring-loaded feature ensures positive engagement under vibration or intermittent loads: the spring maintains preload on the hook so that the latch stays engaged until deliberately released. The component carries a blackened finish, which provides a uniform appearance and surface protection suited to workshop environments. The combination of a simple mechanical design and the spring retention reduces maintenance intervals and offers straightforward replacement of wear parts where necessary. Versatile applications across workshop and light industrial use As a compact lever-style clamp, this model suits repetitive clamping tasks in small-batch production, assembly stations and test rigs where rapid manual operation and dependable closure are priorities. The hook connection supports secure retention of irregular parts or removable fixtures, while the horizontal mounting keeps the actuator accessible without occupying excessive vertical space. Its characteristics make it well suited to both mechanical workshops and light industrial production lines seeking reliable, repeatable clamping. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet B311-5-Y toggle latch clamp into existing fixtures and to confirm stock availability from Emmerich. Technical data SKU: B311-5-Y GTIN: 4061905078699 Manufacturer: Kukamet Facts Arm range: 51.5–81.5 mm Thread length: 110 mm Maximum clamping force: 500 N Maximum holding force: 725 N Weight: 0.98 kg eClass: 21041718 ETIM: EC011973 Special features Spring-loaded mechanism Hook included Horizontal foot mounting Blackened finish Lever-type toggle clamp FAQ What is the difference between clamping force and holding force? Clamping force refers to the pressure the clamp applies to the workpiece (500 N for this model), while holding force is the maximum resistance to separation once engaged (725 N for the B311-5-Y toggle latch clamp). Can the arm length be adjusted for different workpiece heights? Yes, the clamp features an adjustable arm from 51.5 mm to 81.5 mm and a 110 mm thread length to fine-tune engagement for varying part heights. Is the latch suitable for use on assembly jigs with repeated manual operation? The spring-loaded design of the B311-5-Y ensures positive engagement and quick manual operation, making it suitable for repetitive tasks in assembly and fixturing. What mounting arrangement does this clamp require? The unit uses a horizontal foot mounting configuration, designed to be fixed to benches, plates or tooling bases where lateral access and compact installation are needed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
51.5-81.5mm Closing Clamp With Spring, 500N Thrust/725N Hold, Zinc-Plated - Kukamet
Compact, durable clamping with a 500 N maximum clamping force, zinc-plated corrosion protection and an adjustable arm of 51.5–81.5 mm ensures secure fixture retention and long service life; order directly via Metav Werkzeuge or ask the consultants for tailored advice. Kukamet 311 Closure Clamp — horizontal-base, spring-loaded toggle clamp with adjustable arm The 311 closure clamp is a horizontal-foot toggle clamp designed for secure holding in jigs and fixtures across metalworking and workshop applications. Zinc-plated corrosion protection Spring-loaded action for secure closing Horizontal-foot mounting for stable installation Adjustable arm range 51.5–81.5 mm Consistent, measurable clamping performance for production workflows The lever mechanism provides a reliable clamping action with a maximum clamping force of 500 N and a holding force of 725 N, values that support repeatable fixing in small-series production and shop-floor fixtures. The distinction between clamping and holding force is significant: clamping force refers to the instant pressure applied during engagement, while holding force denotes the clamp’s ability to keep a workpiece secured under load. These numerical specifications enable planners to match the clamp to application requirements and calculate safety margins for machining or assembly operations. Built to resist workshop conditions and reduce downtime Constructed with a zinc-plated finish, the clamp offers enhanced resistance to corrosion in mixed workshop environments, extending service intervals and protecting contact surfaces. The spring-loaded latch ensures positive engagement and reduces the risk of accidental release during handling. The design with a horizontal foot facilitates low-profile mounting on fixtures or tooling plates, providing a compact mounting footprint while maintaining mechanical stability. Durability-focused features translate directly into lower maintenance effort and fewer production interruptions. Fast, adjustable clamping that integrates into fixtures The adjustable arm span (51.5–81.5 mm) and a threaded length of 110 mm allow precise setting of the clamp’s reach and engagement point, simplifying integration into existing jigs. The toggle principle locks the lever in position once closed, converting operator motion into a secured hold without constant manual pressure — a practical advantage for repetitive processes where cycle time and operator ergonomics matter. The clamp’s balanced mass (0.98 kg) and compact form make positioning and replacement straightforward within modular fixturing systems. Suitable use cases and benefits for workshop and light industrial settings This clamp is suited to fixture work in metal fabrication, light assembly, and woodworking jigs where reliable repeatability is required. The combination of adjustable reach, spring-loaded retention and corrosion resistance makes it particularly useful for fixtures subject to frequent changeover or variable stock sizes. By specifying a clamp with clear force ratings and mounting form, engineering teams achieve predictable behaviour in production setups and reduce rework caused by inconsistent clamping. Contact Metav Werkzeuge for a fixture consultation and specify the Kukamet 311 closure clamp (SKU 311-5-Y) for reliable, adjustable clamping solutions — Metav Werkzeuge’s advisors can confirm fitment and technical suitability for each project. Technical data SKU: 311-5-Y GTIN: 8682843520956 Eclass: 21041718 Brand: Kukamet Material: zinc-plated Mounting: horizontal foot Thread length: 110 mm Arm range: 51.5–81.5 mm Max clamping force: 500 N Max holding force: 725 N Weight: 0.98 kg Spring-loaded: yes With hook: yes Facts Article type: toggle/closure clamp Category: Spanner SKU identifier: 311-5-Y ETIM: EC011973 Special features Corrosion protection via zinc plating Adjustable arm for variable workpiece sizes Spring-assisted closing mechanism Horizontal-foot attachment for stable mounting Threaded connection for secure adjustment FAQ What is the adjustable arm range of the clamp? The clamp offers an adjustable arm range of 51.5–81.5 mm, enabling adaptation to varying workpiece dimensions. Which materials is this clamp suitable for in fixtures? The Kukamet 311 closure clamp is suitable for general fixture use across metallic and non-metallic assemblies where a mechanical toggle clamp is appropriate. How much clamping and holding force does the clamp provide? The device provides a maximum clamping force of 500 N and a holding force of 725 N, measured under standard test conditions. How is the Kukamet 311 mounted to a fixture plate? Mounting is via a horizontal foot, allowing low-profile attachment to plates or jigs with the threaded connection set to the required engagement. Is the clamp protected against corrosion? Yes, the clamp is zinc-plated, offering improved resistance to corrosion in workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
51mm Horizontal Clamp Low Base Self-Adjusting Foot Zinc-Plated, 2500N Closing Force / 3200N Holding Force - Kukamet
Take advantage of the combination of a galvanised finish, a self-adjusting low foot and proven clamping figures for consistent, time-saving workholding. Order the clamp directly via Metav Werkzeuge or consult the technical team for application advice. Horizontal clamp 551-3 – Galvanised horizontal toggle clamp with low, self-adjusting foot (Kukamet) A Horizontal clamp 551-3 designed for secure temporary workpiece holding in welding, assembly and fixture applications, featuring a low-profile foot for tight setups. Galvanised finish for corrosion resistance Self-adjusting low foot for uneven workpieces Clamping force 2,500 N Holding force 3,200 N Secure clamping for repeatable fixtures The 551-3 delivers quantifiable performance: a clamping force of 2,500 N combined with a holding force of 3,200 N ensures repeatable results in series production and jigs. These figures translate into reliable retention during machining or assembly, reducing rework and downtimes. The toggle mechanism converts lever travel into stable pressure, providing efficient, mechanical advantage without complex adjustments. Compact, low-profile design for tight setups A low-profile foot and compact footprint allow the clamp to be mounted where space is limited. With a width of 55.5 mm, a height of 51 mm and a mass of 0.53 kg, the unit fits into confined fixtures and on thin fixture plates while keeping overall weight low. The reduced clearance requirement simplifies fixture layout and enables closer part spacing, supporting higher throughput in constrained work envelopes. Durable finish and automatic alignment for long service life The galvanised surface protects against corrosion in workshop and light industrial environments, extending service intervals and preserving appearance. The self-adjusting foot compensates for slight part variation or uneven clamping surfaces, ensuring full-face contact and even force distribution. Together, these features reduce maintenance needs and help maintain consistent clamping behaviour over prolonged use. Easy integration into existing fixture systems As a horizontal toggle clamp with a lever-actuated design, the unit integrates smoothly into assembly rigs, welding jigs and manufacturing fixtures. The simple mounting geometry and standard dimensions permit quick replacement or addition to existing setups, while the robust construction supports repetitive cycles in production. Where predictable mechanical clamping is required, this solution offers a pragmatic balance of reliability and compactness. Choose Kukamet quality for dependable clamping—contact Metav Werkzeuge for stock information and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 551-3 GTIN: 8680731502855 ECLASS: 21041719 ETIM: EC011973 Facts Width: 55.5 mm Height: 51 mm Weight: 0.53 kg Clamping force (max): 2,500 N Holding force (max): 3,200 N Special features Galvanised finish Self-adjusting low foot Horizontal toggle clamp design Category: Spanner FAQ What clamping and holding forces does this clamp provide? The clamp provides a clamping force of 2,500 N and a holding force of 3,200 N for secure temporary workpiece retention. Is the foot adjustable for uneven surfaces? Yes, the unit features a self-adjusting low foot that compensates for minor surface irregularities to ensure even contact. What environments is the clamp suited for? With a galvanised finish, the clamp is suitable for workshop and light industrial environments where corrosion resistance is required. Can the clamp be integrated into existing fixtures? The horizontal toggle design and compact dimensions allow straightforward integration into assembly, welding and fixture systems. Which manufacturer produces this clamp and what is the SKU? The clamp is produced by Kukamet and listed under SKU 551-3. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com