Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
45-127mm Closure Clamp Horizontal Base With Hook, 11,000N Thrust, Zinc-Plated - Kukamet
Take advantage of a compact, galvanised clamp that delivers 11,000 N holding force with an adjustable arm (45–127 mm) for reliable fixture security; order directly via Metav Werkzeuge or consult the team for application advice. 311 Latch Clamp — Horizontal Base, 11 kN Clamping Force (Kukamet) 311 is a latch clamp designed for secure fastening in jigs and fixtures where a horizontal base mounting and hook attachment are required Galvanised steel construction for corrosion protection 11,000 N clamping force for secure holding Adjustable arm 45–127 mm for versatile use Horizontal base with hook for fixture mounting Consistent holding power for production and assembly The clamp delivers a rated 11,000 N clamping force, which ensures secure holding during machining, assembly and transport of workpieces. High clamping force reduces the risk of part movement under load and contributes to repeatable results in serial production. The mechanism operates as a latch-style toggle, providing a fast mechanical lock with minimal adjustment, which helps to maintain cycle times and process stability. Built for longevity in workshop environments With a galvanised finish and robust steel construction, the device resists corrosion in typical workshop and light industrial conditions, extending service life and reducing replacement cycles. The component mass of 0.945 kg balances rigidity with manageable handling during fixture assembly. Simple surface protection and occasional inspection extend operational reliability, supporting predictable maintenance schedules. Flexible mounting and straightforward integration The clamp features an adjustable arm (45–127 mm) and a horizontal base that accepts the integrated hook for straightforward attachment to fixtures and panels. A thread length of 110 mm offers secure fastening into plates or brackets, allowing easy fine‑tuning of clamping position without bespoke modification. The horizontal-foot layout is especially suitable for low-profile fixtures where lateral access and a compact footprint are priorities. Easy specification and practical use in jigs Compact dimensions and clear identifiers simplify procurement and inventory. The product is supplied as SKU: 311-5 and carries GTIN: 8680731509380, enabling reliable ordering and traceability. The latch mechanism requires no complex setup, which streamlines assembly line changeovers and reduces training effort for operators. Suitable for repeated clamping cycles where consistent mechanical performance is required For reliable fixture clamping with proven holding capacity, request the Kukamet 311 latch clamp from Metav Werkzeuge — technical advice and order processing are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 311-5 GTIN: 8680731509380 Category: Spanner Facts Clamping force: 11,000 N Holding force: 11,000 N Arm range: 45–127 mm Thread length: 110 mm Weight: 0.945 kg eClass: 21041718 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal base With hook: yes Special feature: none FAQ What clamping force does the 311 latch clamp provide? The 311 latch clamp by Kukamet provides a clamping force of 11,000 N, suitable for demanding holding tasks in fixtures and jigs. Can the arm length be adjusted to fit different workpieces? Yes, the clamp has an adjustable arm (45–127 mm) that allows adaptation to varying part sizes and fixture geometries. Is the surface treatment suitable for workshop environments? The clamp’s galvanised finish offers corrosion resistance appropriate for standard workshop and light industrial conditions. How is the clamp mounted to a fixture plate? The unit is designed for a horizontal base mounting and features a 110 mm thread length for secure attachment into plates or brackets. Which SKU should be ordered for this model? Order reference is SKU: 311-5; the GTIN is 8680731509380 for supply chain and identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45-127mm Closure Clamp With Safety Locking, Horizontal Foot Mount, 10kN Clamp Force - Kukamet
Take advantage of the combination of robust clamping power, a wide adjustable arm and a secure safety lock for reliable workpiece retention and shorter setup times. Order directly via Metav Werkzeuge or consult our specialists for application advice and availability. Kukamet 311 locking clamp — horizontal base, arm 45–127 mm The Kukamet 311 locking clamp is a horizontal-mount lever clamp designed for secure fixture and holding tasks in workshop and light industrial production settings Safety lock for secure retention Arm range 45–127 mm Horizontal base for stable mounting Blackened finish for surface protection Heavy-duty hold with quantifiable performance This lever-style clamp delivers defined clamping force and repeatable holding characteristics: the mechanism is specified with a maximum clamping force of 10,000 N and a holding force of 11,000 N, which ensures stable retention of components during machining, assembly or inspection. The adjustable arm, ranging 45–127 mm, provides flexibility for varied workpiece thicknesses while the thread length 110 mm allows secure fastening into fixtures. These numerical specifications translate directly into reduced rework and fewer interrupted cycles in production because forces and ranges are verifiable and consistent. Fast installation and safe operation on the shop floor Fitted with a horizontal base for straightforward mounting and a built-in safety lock, the clamp prevents accidental release once engaged and is suitable for permanent fixture points on jigs and benches. The unit includes a practical hook for certain latch applications and is finished in a blackened coating that helps protect contact surfaces. The straightforward mechanical action is achieved without electronics; the action is therefore robust, easy to inspect and maintained using standard workshop routines. Clear mechanical locks and visible engagement improve operator confidence during repetitive tasks. Minimal upkeep, durable design and efficient handling Weighing 0.945 kg, the clamp is compact yet substantial enough for repeated industrial use. The solid construction, combined with the protective surface finish, reduces the need for frequent replacement and supports predictable life-cycle planning. Routine checks of the spindle thread and the locking pawl are recommended; lubrication of moving contacts will preserve smooth operation. With its compact footprint and quantified performance data, this clamp is suitable for integration into fixtures where space is limited but reliable clamping is required, contributing to smoother workflows and fewer stoppages. For reliable, workshop-ready clamping based on Kukamet's proven mechanism, contact Metav Werkzeuge in Emmerich for tailored advice and current availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B311-5-L GTIN: 8680731508291 ETIM: EC011973 ECLASS: 21041718 Facts Arm range: 45–127 mm Thread length: 110 mm Max clamping force: 10,000 N Max holding force: 11,000 N Weight: 0.945 kg Special features Material: blackened finish Mounting: horizontal base With hook: yes Safety lock: yes SKU: B311-5-L FAQ What clamping forces can be expected from this clamp? The clamp provides a maximum clamping force of 10,000 N and a holding force of 11,000 N, allowing the Kukamet 311 locking clamp to secure workpieces reliably under typical workshop loads. Is the clamp suitable for permanent fixture mounting? Yes, the horizontal base design is intended for stable mounting on jigs, benches and fixture plates, and the safety lock ensures secure engagement when used as a fixed fixture element. How wide is the adjustable clamping arm? The adjustable arm covers a range of 45–127 mm, which accommodates a variety of workpiece thicknesses without additional adapters. What finish and maintenance are recommended? The unit is supplied with a blackened finish for surface protection; periodic inspection of the thread and locking pawl and light lubrication of moving contacts will maintain smooth operation. Which SKU should be referenced for ordering or technical queries? Refer to SKU B311-5-L (Kukamet 311 locking clamp) for orders, spare parts inquiries and fixture integration documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45-127mm Toggle Clamp Horizontal Base With Hook, 11kN Clamping Force, 110mm Thread Length - Kukamet
Take advantage of the 11,000 N clamping and an adjustable 45–127 mm arm for reliable, repeatable workholding in production environments. Order the clamp directly via Metav Werkzeuge or request advice from our consultants to ensure optimal fixture integration. Toggle Clamp 311 — horizontal-foot toggle clamp with hook and 11,000 N clamping force (Kukamet) A compact, heavy-duty toggle clamp 311 designed for horizontal mounting in jigs and fixtures, offering robust holding power and an adjustable arm for versatile positioning. 11,000 N clamping force Horizontal foot for stable mounting Adjustable arm 45–127 mm Blackened finish for corrosion resistance Secure heavy-duty holding for demanding fixtures The 11,000 N clamping and holding capacity delivers a high safety margin for heavy workpieces and repetitive production cycles. The clamp’s mechanism converts lever movement into a strong, locked hold, ensuring process stability and reduced cycle variation. Designed for industrial fixtures, this solution improves part repeatability and minimises rework by keeping components firmly located during machining or assembly. The robust construction supports frequent use under high loads while preserving clamping consistency. Flexible positioning speeds up set-up and changeovers An adjustable arm (45–127 mm) allows quick adaptation to different part geometries without changing the fixture design. The horizontal mounting configuration with a flat base simplifies installation on tooling plates or machine tables and supports compact layout designs. The integrated hook facilitates secure engagement and rapid release, reducing clamping time and enabling faster changeovers. These features together lead to measurable improvements in throughput and operator efficiency on the shop floor. Long service life with low maintenance demands The blackened finish provides corrosion resistance and reduces visible wear, extending service intervals in workshop environments. The mechanical design avoids complex maintenance; routine checks of the pivot points and thread adjustment keep performance reliable. Where high uptime is a priority, the clamp’s straightforward maintenance and durable surface treatment contribute to predictable life-cycle costs and fewer unscheduled stoppages during production. Precision mounting and measurable technical fit Compact dimensions and a defined thread length (110 mm) support secure assembly into custom fixtures while preserving alignment and clamping geometry. The clamp’s consistent locking action enhances positional accuracy across repeated cycles, which is beneficial for operations requiring close tolerances. Compatibility with standard fixture plates and a well-documented set of measurable parameters simplifies integration into existing tooling systems and CAD layouts. Discuss Kukamet toggle-clamp options with Metav Werkzeuge to confirm fitment and secure your supply from our Emmerich warehouse Technical Data SKU: B311-5 GTIN: 8682843522493 Category: Spanner Facts Clamping force: 11,000 N Holding force: 11,000 N Arm range: 45–127 mm Weight: 0.945 kg Thread length: 110 mm Special features Mounting type: Horizontal foot Finish: Blackened (brünierte surface) Includes hook eClass: 21041718 ETIM: EC011973 FAQ What maximum clamping force does this clamp provide? The clamp delivers a maximum clamping force of 11,000 N, making the Toggle Clamp 311 suitable for heavy-duty workholding tasks in production fixtures. Can the clamp be mounted on a flat tooling plate? Yes; the horizontal foot design allows secure mounting on flat tooling plates and machine tables for compact fixture layouts. How is the clamping distance adjusted? Adjustment is made via the threaded arm, which offers an adjustment range of 45–127 mm to adapt to different part sizes and profiles. Is the surface treated to resist corrosion? The clamp features a blackened finish, which improves resistance to corrosion and reduces visible wear under workshop conditions. Is the clamp suitable for frequent changeovers? The latch mechanism with hook ensures rapid engagement and release, supporting fast changeovers and reducing fixture set-up time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45-127mm Toggle Clamp Horizontal Base With Safety Lock, 10kN Clamp Force - Kukamet
Take advantage of the combination of high clamping force, galvanised corrosion resistance and a compact design for dependable, repeatable workholding. Order the 311 latch clamp directly via Metav Werkzeuge or ask our consultants if needed. 311 Latch Clamp — horizontal base, galvanised, safety lock (Kukamet) A 311 Latch Clamp engineered for horizontal mounting that delivers secure locking and reliable fixation in jigs, fixtures and production benches. Horizontal mounting foot Galvanised steel construction Safety locking mechanism Adjustable arm 45–127 mm Secure hold for heavy-duty workholding The 311 latch clamp provides a predictable clamping performance by combining a rated clamping force of 10,000 N with a maximum holding force of 11,000 N. This high-force capability ensures components remain stationary during machining, welding or assembly, reducing the risk of micro-movement that causes rejects. The lever-action design converts operator input into a strong, consistent fixing; as a result, cycle times can be kept short while maintaining process reliability. The result is fewer reworks and improved throughput for repetitive production tasks. Corrosion resistance that lowers maintenance needs Constructed in galvanised steel, this locking clamp resists surface corrosion in workshop environments and light industrial settings. Galvanisation extends service life and preserves clamping geometry so that clamping accuracy is maintained over time. The modest mass of 0.945 kg keeps the clamp easy to handle during fixture assembly while still offering robust mechanical stability. For procurement and maintenance planning, the galvanised finish translates to lower lifecycle costs and less frequent replacement compared with untreated alternatives. Flexible installation and mechanical interface Designed with a horizontal mounting foot, the clamp integrates smoothly into existing fixtures and machine tables. The arm is adjustable from 45–127 mm, enabling adaptation to different workpiece heights without bespoke components. A thread length of 110 mm provides secure attachment and fine adjustment when using threaded spindles or extension rods. The built-in hook simplifies engagement in many toggle-style setups, so incorporation into production jigs is straightforward and repeatable. Safety-focused operation for routine use A dedicated safety locking mechanism prevents unintended release under vibration or impact, providing an additional layer of protection during handling and transport of clamped parts. The locking feature is particularly useful where operators need to leave a fixture unattended between process steps or when clamps are used in automated transfer systems. The clamp’s lever geometry offers ergonomic operation, reducing operator strain during high-frequency use and supporting consistent clamping force application. Specification clarity for sourcing and quality control The latch clamp is supplied with clear identifiers for inventory and quality management, allowing straightforward traceability in procurement processes. The compact design and standardised interfaces reduce the effort needed to qualify the component for production. Technical data such as the arm range, thread length and measured forces support rapid compatibility checks with existing fixtures and help engineering teams evaluate suitability without time-consuming trials. For technical advice, compatibility checks or to secure supply from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised consultation and order support Technical data Article number: 311-5-L GTIN: 8680731509434 Manufacturer: Kukamet Core data Arm range: 45–127 mm Thread length: 110 mm Max clamping force: 10,000 N Max holding force: 11,000 N Weight: 0.945 kg eClass: 21041718 ETIM: EC011973 Materials & features Galvanised steel construction Horizontal mounting foot Safety locking mechanism With hook FAQ What maximum clamping and holding forces does this clamp provide? The 311 latch clamp provides a maximum clamping force of 10,000 N and a holding force up to 11,000 N, suitable for demanding workshop applications. Can the clamp be mounted on a horizontal fixture? Yes, the clamp is supplied with a horizontal mounting foot and is intended for fixed horizontal installation in jigs and fixtures. How much adjustment travel does the arm offer? The adjustable arm range is 45–127 mm, allowing adaptation to different workpiece heights without additional components. Is the surface treated to resist corrosion? The clamp features a galvanised finish, which enhances corrosion resistance and reduces maintenance needs in standard industrial environments. What is the article number for ordering and inventory? The SKU for ordering and cataloguing is 311-5-L (GTIN 8680731509434) for the Kukamet latch clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45-95mm Clamp With Horizontal Foot, 7kN Closing Force, 8kN Holding Force, Hooked Arm - Kukamet
Combining a robust 7,000 N clamping force, an 8,000 N holding force and an adjustable 45–95 mm arm ensures reliable, repeatable fixture security for medium‑duty jigs and production work. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Locking toggle clamp 311 — Horizontal base, 7,000 N clamping force (Kukamet) A Locking toggle clamp 311 designed for secure workpiece fastening on jigs and fixtures, featuring a horizontal base and adjustable arm for versatile setup. Horizontal base for stable mounting 45–95 mm adjustable arm length 7,000 N clamping force, 8,000 N holding Brunished black finish for corrosion resistance Dependable clamping power for repeatable production The clamp delivers a 7,000 N clamping force and a 8,000 N holding force, values that translate into consistent retention even under vibration or secondary operations. The built‑in toggle mechanism converts manual lever action into a powerful, locked clamping state, reducing fixture sag and rework. Stated forces are helpful selection criteria when comparing devices for assembly, welding or machining jigs; the figures describe the maximum applied clamp pressure and the maximum sustained holding capability respectively, allowing informed selection for medium‑duty production runs. Fast setup and flexible positioning to save cycle time With an adjustable arm range of 45–95 mm and a horizontal base for secure mounting, the clamp supports rapid installation and repeatable positioning in line jigs and test fixtures. The 95 mm thread length provides fine adjustment and compensates for part tolerances without additional shims. The compact lever action shortens operator movement, which improves ergonomic handling and accelerates cycle time, making the device suitable where repeatability and throughput are priorities. Robust finish and practical design for workshop longevity The component features a blackened finish that offers surface protection and a professional appearance while helping to limit corrosion in standard workshop conditions. The design includes an integrated hook for positive engagement and a compact envelope that minimises interference with nearby tooling. Constructed for industrial use and weighing approximately 0.815 kg, the clamp balances strength and manoeuvrability, supporting straightforward integration into existing clamping systems. For additional technical specifications or mounting recommendations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Choose the Kukamet locking toggle clamp 311 for reliable fixture security and contact Metav Werkzeuge for ordering and tailored application advice. Technical data SKU: B311-4 GTIN: 8680731508277 ECLASS: 21041718 ETIM: EC011973 Core technical values Arm range: 45–95 mm Max clamping force: 7,000 N Max holding force: 8,000 N Thread length: 95 mm Weight: 0.815 kg Design & features Horizontal base mounting With hook Blackened / brunished finish Brand: Kukamet Type: Locking toggle clamp FAQ What maximum clamping and holding forces does the clamp provide? The clamp offers a maximum clamping force of 7,000 N and a holding force of 8,000 N, values stated for the Kukamet locking toggle clamp 311 (SKU B311-4). Can the clamp be adjusted to different workpiece heights? Yes, the adjustable arm range of 45–95 mm and the 95 mm thread length enable fine height compensation for varying workpiece dimensions. Is the clamp suitable for welding fixtures? The robust toggle mechanism and high holding force make this clamp suitable for many welding and assembly fixtures where stable retention is required. How is the clamp mounted to a fixture plate? The clamp is designed for horizontal base mounting, permitting secure bolting to a fixture plate for repeatable positioning. What finish does the clamp have and how does it affect durability? The component has a blackened (brunished) finish, which improves surface protection and reduces corrosion in standard workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45-95mm Toggle Clamp Horizontal Base Stainless Steel With Hook, 7000N Clamping Force - Kukamet
Take advantage of a robust stainless steel design, high holding force and an adjustable arm for versatile clamping. Order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice and fast delivery. Kukamet S311-4 Toggle Latch Clamp – stainless steel, 45–95 mm arm The S311-4 toggle latch clamp is a horizontal-base fastening clamp designed for repetitive fixture and transport tasks in workshops and light production environments. Robust stainless steel construction Horizontal base for secure mounting Adjustable arm 45–95 mm Holding force 8,000 N and closing force 7,000 N Consistent high-force clamping for repeatable production The S311-4 delivers a measurable performance advantage through a holding force of 8,000 N and a closing force of 7,000 N, ensuring reliable retention of components during machining, assembly or transport. These numerical values are decisive where process stability matters: the higher holding force reduces the risk of movement under load, while the closing force describes the clamp’s ability to engage and compress a workpiece. For production planners and workshop managers, that translates into fewer rejects and steadier cycle times. Fast engagement and adjustable reach for flexible fixtures Featuring an adjustable arm that extends from 45 to 95 mm and a horizontal foot for mounting, this toggle latch enables quick set-up changes and precise positioning within fixtures. The integrated hook allows positive engagement with compatible mating parts; the over-centre locking action converts handle travel into secure clamping with minimal operator effort. For teams tasked with frequent fixture changes, this means faster changeover, reduced handling time and consistent clamping pressure across repetitions. Corrosion-resistant design and low maintenance Constructed from stainless steel, the latch offers enhanced corrosion resistance for applications exposed to humidity, coolant splashes or outdoor storage. The mechanical simplicity of the toggle mechanism requires little upkeep: periodic inspection and light lubrication are generally sufficient to maintain performance. For procurement officers, the combination of durable materials and straightforward maintenance reduces life-cycle cost and downtime, supporting a pragmatic, long-term supply strategy. For tailored advice on integrating Kukamet toggle latch clamps into fixtures or jigs, contact Metav Werkzeuge for application support and reliable supply from Emmerich. Technical Data Article number: S311-4 GTIN: 8680731509939 Manufacturer: Kukamet SKU: S311-4 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.815 kg Holding force: 8,000 N Closing force: 7,000 N Arm range: 45–95 mm Thread length: 95 mm Special features Material: stainless steel Mounting: horizontal base With hook: yes No additional special features specified Category: toggle latch clamp FAQ What clamping forces can be expected from this latch clamp? The S311-4 provides a closing force of 7,000 N and a holding force of 8,000 N, values that indicate strong engagement and reliable retention in standard fixture applications. Is the clamp suitable for use in corrosive environments? Yes, the latch is made from stainless steel, offering improved corrosion resistance compared with standard steel components; regular maintenance extends service life. Can the arm be adapted for different fixture depths? The adjustable arm spans 45–95 mm, allowing adaptation to a variety of workpiece or fixture thicknesses without replacing the clamp. How is the clamp mounted? The unit features a horizontal base for secure bolting to fixtures, jigs or mounting plates; thread length is 95 mm for through-fixing or threaded installations. Is this product available through Metav for immediate supply? The Kukamet S311-4 toggle latch clamp is listed with Metav Werkzeuge and can be sourced with delivery and advisory support from Metav’s Emmerich location. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45-95mm Toggle Clamp Horizontal Base With Safety Lock, 7,000N Thrust, Stainless Steel - Kukamet
Benefit from robust stainless steel construction, a safety lock for secure holding and a compact design that delivers 7 kN pressing force for reliable fixture in demanding production environments. Order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Latch clamp 311 (S311-4-L) by Kukamet — stainless steel, 7 kN pressing force Latch clamp 311 is a stainless-steel locking clamp designed for secure, repeatable fixation in assembly, welding and workshop fixturing. Stainless steel body for corrosion resistance Safety lock for secure clamping Horizontal base for stable mounting 7 kN pressing force, 8 kN holding capacity Durable clamping that keeps production running Made from stainless steel, this locking clamp provides corrosion resistance and long service life, reducing maintenance intervals and downtime. With a 7 kN pressing force and 8 kN holding capacity, the clamp translates machine input into consistent clamping pressure; this distribution of pressing versus holding force ensures workpieces remain secured during machining or welding without overloading the fixture. The robust design and compact mass contribute to predictable behaviour in series production, making the component suitable for both industrial and artisan environments. Secure locking and stable mounting for protected workpieces The integrated safety lock prevents accidental release and adds an extra layer of process safety in automated or manual workflows. Mounted via a horizontal base, the clamp offers a low-profile attachment point that stabilises the unit under lateral loads. The built-in hook provides an additional anchoring option where quick engagement is required. These features combine to reduce setup time and protect both the fixture and the operator by limiting unexpected movement during clamping cycles. Flexible reach and straightforward integration into fixtures With an arm reach adjustable from 45–95 mm and a threaded spindle length of 95 mm, the clamp adapts to a wide range of part sizes and fixture geometries. The moderate mass (0.815 kg) allows for easy handling while retaining rigidity under load. Technical terms: pressing force denotes the maximum force applied when the clamp is engaged; holding force indicates the sustained resistance to displacement once secured. This distinction helps in selecting the correct clamp for dynamic processes or static fixturing. The unit’s compact footprint and standard interface make mechanical integration into jigs and modular tooling systems straightforward. For secure, stainless-steel clamping from Kukamet, contact Metav Werkzeuge for tailored advice and product availability — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: S311-4-L Model: 311 GTIN: 8680731509878 Material: Stainless steel Weight: 0.815 kg Facts Arm range: 45–95 mm Max pressing force: 7000 N Max holding force: 8000 N Thread length: 95 mm ECLASS: 21041718 ETIM: EC011973 Special features Horizontal base mounting Safety lock With hook Corrosion-resistant construction Suitable for workshop and industrial fixtures FAQ What clamping capacity does the latch clamp offer? The Kukamet latch clamp 311 (SKU S311-4-L) provides a maximum pressing force of 7 kN and a holding capacity of 8 kN, suitable for many general-purpose fixturing tasks. Is the clamp suitable for corrosive or humid environments? Yes, the latch clamp 311 is constructed from stainless steel, offering resistance to corrosion and extended service life in humid workshop conditions. How is the clamp mounted to a fixture? The unit is designed for a horizontal base mounting; this stabilises the clamp under lateral loads and simplifies integration into jigs and plates. What adjustment range does the clamp offer for different part sizes? The clamp arm covers a range of 45–95 mm and a threaded spindle length of 95 mm, allowing adaptation to varied workpiece thicknesses and fixture depths. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45-95mm Toggle Clamp Horizontal Foot With Hook, 7kN Force, Zinc-Plated - Kukamet
Benefit from a holding force of 8,000 N, a clamping arm range of 45–95 mm and a corrosion‑resistant zinc‑plated finish for dependable fixture performance in repetitive production. Order the 311 toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. 311 toggle clamp – horizontal foot, zinc‑plated (Kukamet) 311 toggle clamp is a compact horizontal‑foot lever clamp designed for secure, repeatable workholding in workshops and light production environments. Zinc‑plated steel construction Clamping arm 45–95 mm Holding force up to 8,000 N Horizontal foot mounting with hook Consistent clamping power for production workflows The lever clamp delivers a holding force of 8,000 N and a maximum pressing force of 7,000 N, offering measurable retention for fixturing and assembly processes. These force ratings translate into fewer slip incidents and more consistent results when positioning and securing parts, which supports throughput and reduces rework. The specification of forces provides a clear basis for choosing the clamp for applications where repeatable, quantifiable fixation matters. Flexible mounting and reach for varied fixtures Equipped with a horizontal foot and an integrated hook, the device simplifies attachment to jigs and fixture plates while keeping the clamping axis low and unobtrusive. The clamping arm 45–95 mm range and thread length 95 mm allow adaptation to different stock sizes without additional components, shortening setup times. The combination of an adjustable reach and a robust mounting method supports efficient changeovers in cellular manufacturing and maintenance tasks. Durable finish and compact handling A zinc‑plated surface provides basic corrosion resistance for workshop environments, extending service life where occasional exposure to humidity or cutting fluids occurs. With a mass of 0.815 kg, the clamp offers a compact footprint that is easy to incorporate into existing fixtures without adding excessive weight. The plated finish and modest weight reduce the need for frequent replacement and help maintain consistent clamping behaviour over time. Fast lever action for improved cycle times The lever mechanism and toggle linkage deliver quick engagement and reliable locking, turning manual clamping into a repeatable, time‑saving operation. The lever clamp design reduces operator effort and supports faster part handling compared with screw‑type clamps, improving ergonomics and reducing cycle times in repetitive tasks. The simple mechanical construction also enables straightforward inspection and low‑complexity maintenance. For supply and tailored advice on the 311 toggle clamp from Kukamet, contact Metav Werkzeuge for a precise quotation or technical consultation by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 311-4 GTIN: 8680731505238 Brand: Kukamet Model: 311 Weight: 0.815 kg Facts Clamping arm: 45–95 mm Holding force: 8,000 N Maximum pressing force: 7,000 N Thread length: 95 mm Special features Material: zinc‑plated Mounting: horizontal foot With hook Classification: eClass 21041718, ETIM EC011973 FAQ What maximum holding capacity does the clamp provide? The Kukamet 311 toggle clamp provides a holding force of up to 8,000 N and a maximum pressing force of 7,000 N for reliable retention in fixture applications. How is the clamp mounted to a fixture plate? Mounting is effected via a horizontal foot; the clamp is supplied with a hook and a threaded section (95 mm) to secure it to plates or fixtures. What clamping range is available for different workpieces? The clamping arm spans 45–95 mm, enabling adaptation to a variety of part heights without additional adapters. Is the surface treatment suitable for workshop environments? The component is zinc‑plated, offering basic corrosion protection appropriate for general workshop and light industrial use. What is the unit weight and how does that affect fixture design? The clamp weighs 0.815 kg, giving a compact, lightweight option that minimises added mass on movable fixtures Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45-95mm Toggle Clamp With Horizontal Base, Safety Lock, 7kN Thrust, Zinc Plated Hook - Kukamet
Take advantage of the combination of high holding force, corrosion-resistant finish and a secure safety lock for reliable, repeatable closures in production and assembly. Order the closure directly via Metav Werkzeuge or contact our consultants for application advice. Toggle latch clamp 311-4-L — galvanised, safety-lock lever clamp (Kukamet) A toggle latch clamp 311-4-L designed for secure, repeatable closures in jigs, fixtures and access panels. Galvanised steel for corrosion resistance Safety locking mechanism included Holding force up to 8,000 N Adjustable arm 45–95 mm range Secure closures that reduce rework and downtime The toggle latch clamp delivers a clear operational benefit by separating clamping or pressing force values. The listed pressing force of 7,000 N indicates the maximum contact force applied during engagement, while the holding force of 8,000 N describes the clamp’s resistance to opening under load. This distinction means that fixtures can be designed with predictable clamping behaviour, reducing part movement during machining and lowering the risk of rejects. The repeatability of a lever-operated latch is particularly valuable in batch production, where consistent results are required across multiple cycles. Durable finish for workshop conditions and long service life Constructed from galvanised steel, this clamp withstands humidity and routine workshop exposure without rapid surface degradation. With a mass of 0.815 kg, the component offers substantial robustness while remaining manageable for retrofitting into existing assemblies. The galvanised layer provides sacrificial corrosion protection that is easy to specify for both indoor and sheltered outdoor applications. Explained simply: galvanising extends service life and reduces maintenance intervals, which supports continuous operation in demanding environments. Rapid installation and flexible adjustment for fixtures Designed for a horizontal base mounting, the clamp is suited to bench-mounted jigs and flat panels. The adjustable arm range of 45–95 mm allows fast accommodation of varying closure gaps without changing hardware. A 95 mm thread length facilitates secure fastening in common mounting plates and ensures sufficient engagement for the included hook. Together, these features shorten set-up time and enable quicker changeovers on the shop floor, improving throughput without sacrificing clamping reliability. Safety locking and consistent performance in production A built-in safety lock prevents accidental release during operation, which protects both components and operators in automated or semi-automated environments. The presence of an integrated hook increases engagement security, especially under vibration or dynamic loading. Designed for use in industrial fixtures and access panels, this lever clamp supports safe handling procedures and consistent process outcomes, making it a pragmatic choice where both productivity and workplace safety are priorities. For secure, dependable clamping choose the Kukamet 311-4-L; contact Metav Werkzeuge in Emmerich for availability and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 311-4-L GTIN: 8680731502305 Manufacturer: Kukamet Eclass: 21041718 ETIM: EC011973 Core technical data Weight: 0.815 kg Max pressing force: 7,000 N Max holding force: 8,000 N Arm range: 45–95 mm Thread length: 95 mm Design and special features Material: galvanised steel Horizontal base mounting With hook Safety locking mechanism Lever-operated closure FAQ What is the maximum holding force of this clamp? The Kukamet toggle latch clamp 311-4-L provides a holding force of up to 8,000 N, specified to ensure secure closures under static load. Can this clamp be mounted on a flat plate or panel? Yes, the clamp is designed for horizontal base mounting and includes a 95 mm thread length suitable for plate fastening in standard fixture designs. Is the 311-4-L suitable for outdoor or humid environments? The galvanised finish improves corrosion resistance, so the 311-4-L is appropriate for sheltered outdoor use and humid workshop conditions where surface protection is required. How adjustable is the closure gap for this latch? Adjustment is possible across an arm range of 45–95 mm, enabling quick adaptation to different closure gaps without replacing components. Does the clamp include any safety features? A safety locking mechanism is integrated into the Kukamet 311-4-L to prevent accidental release during operation, increasing workplace safety and process reliability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500 N Pneumatic Clamp Horizontal Foot 95° Angle, Zinc Plated, 5000 N Holding Force - Kukamet
Take advantage of robust, repeatable clamping with a 4,500 N pneumatic actuation and a galvanised finish for long-term corrosion resistance; order the Kukamet clamp directly via Metav Werkzeuge or ask for application advice from the consultants at Emmerich. Pneumatic clamp 611 by Kukamet — horizontal-base pneumatic lever clamp, 4,500 N The Pneumatic clamp 611 is a pneumatic lever clamping solution designed for secure workholding on benches and fixtures in metalworking and assembly environments. Horizontal base for stable mounting Up to 4,500 N clamping force Galvanised finish for corrosion resistance 95° operating angle for versatile positioning Consistent, measurable clamping performance for reliable production The clamping unit delivers a clearly defined 4,500 N actuation force with a maximum 5,000 N holding capacity, giving repeatable retention where process stability matters. The distinction between actuation and holding force is important: the actuation figure describes the dynamic force generated by the pneumatic drive, while the holding value indicates the static retention once the clamp is engaged. This separation supports planners and purchasers in assessing whether the fixture meets cycle and safety requirements without overspecifying equipment. The reliable force ratings also enable predictable cycle times and contribute to lower reject rates on batch production. Durable design that suits workshop conditions Constructed with a galvanised finish and a secure horizontal base, the clamp resists workshop humidity and typical contamination, reducing maintenance frequency. The compact unit weighs 3.09 kg, which aids mounting stability without excessive mass on the fixture. The 95° operating angle of the lever enables positive, compact clamping travel and straightforward integration into jigs. Materials and geometry are chosen to balance robustness with serviceability, making the component suitable for repetitive use in demanding shop-floor environments. Practical integration for versatile workholding setups As a pneumatic lever clamp, the device fits into pneumatic circuits where manual effort is to be reduced and cycle times improved. The compact footprint and horizontal mounting simplify placement on modular fixtures and allow multiple clamps to be combined for larger parts. The galvanised surface and mechanical design reduce downtime for upkeep, supporting uninterrupted workflows. For operations seeking to standardise on dependable, easy-to-handle clamping elements, this unit provides a pragmatic blend of performance and durability that aligns with industrial workflows. Discuss specification and procurement of the Kukamet pneumatic clamp 611 with Metav Werkzeuge in Emmerich — expert advice and reliable European supply are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 611-5 GTIN: 8680731504668 Manufacturer: Kukamet Weight: 3.09 kg Facts Clamping force (max): 4,500 N Holding force (max): 5,000 N Operating angle: 95° Weight: 3.09 kg eClass: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal base Product family: lever clamp Category: spanner FAQ What is the difference between the clamping force and the holding force? The clamping force refers to the pneumatic actuation capability (the 4,500 N figure for this clamp), while the holding force indicates the static retention capacity (the 5,000 N holding rating for the Kukamet unit). Can the clamp be mounted on a modular fixture with multiple clamps? Yes, the horizontal-base design and compact form factor make the Kukamet pneumatic clamp 611 suitable for installation on modular fixtures alongside other clamps. Is the surface treatment suitable for humid workshop environments? The galvanised finish on the clamp provides corrosion resistance appropriate for typical workshop conditions and helps to reduce maintenance intervals. What is the operating angle and how does it affect installation? The clamp operates at 95°, which produces a compact clamping travel and simplifies positioning on jigs and fixtures where space is limited. How heavy is the unit and does weight affect mounting? The unit weighs 3.09 kg, a balance that supports stable mounting without adding unnecessary mass to the fixture. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500 N Pneumatic Push‑Rod Clamp Horizontal Base, 18 mm Piston, 7200 N Holding Force, Zinc Plated - Kukamet
Reliable clamping with a high holding force and compact, corrosion-resistant construction ensures secure workholding and long service life; benefit from a 4,500 N thrust capacity combined with 7,200 N holding force for stable fixtures — order directly via Metav Werkzeuge or consult our specialists for integration advice. Pneumatic Push-Rod Clamp 621 — Horizontal-foot pneumatic clamping device, 4.5 kN thrust (Kukamet) The Pneumatic Push-Rod Clamp 621 is a horizontal-foot clamping device designed for automated workholding and production fixtures in machine shops and assembly lines. 4,500 N maximum thrust force 7,200 N maximum holding force Zinc-plated body with horizontal foot mount Consistent high-force clamping for reliable production The unit delivers a 4,500 N maximum thrust and a 7,200 N holding force, engineered for repeatable workholding under cycle stress. This force profile reduces part movement during machining and assembly, improving process stability and reducing rework rates. The compact piston design with an 18 mm diameter transmits force efficiently while keeping the actuator stroke suitable for common fixture geometries, allowing reliable clamping in short cycle times without large spatial demands. Compact, corrosion-resistant construction for durable fixtures A zinc-plated housing provides enhanced resistance against corrosion in workshop environments, ensuring the clamp maintains dimensional integrity over repeated use. At approximately 2.26 kg, the device combines lightweight installation with robust mechanical properties, simplifying fixture design and reducing inertia on moving assemblies. The horizontal foot mounting facilitates straightforward attachment to plates or subframes, making it suitable for jigs, modular tooling and automated stations where footprint and longevity matter. Simple mechanical integration into automated systems The actuator’s geometry and mounting style support direct integration into pneumatic circuits and fixture plates. The 18 mm piston diameter is compatible with standard valve sizing, enabling predictable air consumption and control behaviour when paired with existing plant pneumatics. Engineers benefit from clear, measurable parameters for cycle planning and safety margins, which simplifies engineering documentation and accelerates commissioning. Designed for dependable production and clear specification With standard classification data included, the clamp supports planning and procurement without ambiguity. The device’s measurable characteristics provide the basis for engineering decisions: force calculations, fixture stiffness and component life estimations. Where corrosion resistance, compact mounting and consistent clamp force are required, this model offers a practical balance between performance and simplicity — a solid choice for repetitive manufacturing tasks and fixture retrofits. Contact Metav Werkzeuge for tailored fixture recommendations or a quotation for the Kukamet Pneumatic Push-Rod Clamp 621; local stock and expert support from Emmerich are available to assist with specification and delivery. Technical data Article number: 621-4-Q18 GTIN: 8680731502978 Brand: Kukamet Facts Maximum thrust force: 4,500 N Maximum holding force: 7,200 N Piston diameter: 18 mm Weight: 2.26 kg ECLASS: 21041716 ETIM: EC011973 Special features Material: zinc-plated Mounting: horizontal foot Application: pneumatic push-rod clamping Category: Clamping technology FAQ What maximum thrust and holding forces does this clamp provide? The clamp offers a maximum thrust of 4,500 N and a holding force up to 7,200 N, suitable for medium-duty production fixtures and automated workholding. Is the clamp suitable for corrosive workshop environments? The zinc-plated housing gives the unit increased corrosion resistance, making the clamp appropriate for standard workshop atmospheres and manufacturing cells. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot, allowing direct bolting to plates or subframes; the horizontal-foot design supports compact fixture arrangements. Which piston diameter is used and why does it matter? The actuator uses an 18 mm piston diameter; this dimension informs valve sizing and expected air consumption, which helps engineers size pneumatic controls for consistent cycle performance. Can the clamp be integrated into existing pneumatic systems without modification? Yes, the clamp’s standard pneumatic characteristics are compatible with common valves and supply pressures, enabling integration into existing circuits with standard components. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500 N Push Rod Clamp M10x70 Horizontal Base With Safety Lock, Zinc Plated - Kukamet
Take advantage of a compact, galvanised clamp that combines 4,500 N clamping force with a high 7,200 N holding force for stable, repeatable workholding; the horizontal foot and M10x70 spindle allow straightforward fixture integration. Order directly via Metav Werkzeuge or contact our consultants for application advice. Pushrod Clamp 541 — Horizontal foot clamp with safety lock, galvanised construction (Kukamet) The Pushrod Clamp 541 is a compact horizontal clamp designed for secure workholding in fixtures and jigs across workshops and small-series production. Horizontal foot for stable mounting Safety lock prevents unintentional release Galvanised steel construction for corrosion resistance 4,500 N clamping force, 7,200 N holding force Reliable clamping that reduces rework and downtime The clamp delivers a 4,500 N clamping force with a maximum holding force of 7,200 N, values that translate directly into fewer slippages and more consistent machining results. The spindle accepts an M10x70 connection which simplifies integration into existing fixtures; the robust force figures mean shorter inspection cycles and lower scrap rates in repetitive operations. By converting rated forces into expected production outcomes, the device supports more efficient cycle times and consistent quality in routine assembly and machining tasks. Built for long service with low maintenance needs A galvanised finish gives the unit effective corrosion resistance while the compact construction keeps mass low at 0.915 kg, facilitating handling during set-up and changes. The simple mechanical design reduces the need for frequent adjustment; maintenance tasks are limited to occasional lubrication and visual inspection. The integrated safety lock prevents accidental release during loading or transport, adding a passive layer of operator protection and reducing the risk of workpiece damage in busy environments. Fast integration into jigs and fixture systems The horizontally mounted foot provides a stable base for bolting the clamp into place and ensures repeatable alignment when used in modular fixtures. The clamp’s piston diameter of 18 mm transmits force efficiently into the pushrod, and the M10x70 spindle thread is a commonly available standard that eases replacement or custom adaptation. The mechanical simplicity enables toolroom staff and fixture designers to implement secure clamping without complex controls or pneumatics, keeping the system accessible to workshops with limited specialised resources. Versatile applications across workshop and production tasks Suitable for bench work, jigs and small batch production, the device performs well where reliable mechanical clamping is required and where corrosion resistance is beneficial. As a Kukamet component supplied through Metav’s distribution, the unit fits the needs of maintenance teams, fixture builders and contract manufacturers seeking dependable, easy-to-install clamps. The combination of sturdy materials, clear force ratings and a safety interlock provides both operational confidence and measurable performance improvements. For precise fixture recommendations and supply, contact Metav Werkzeuge for technical guidance and ordering—Metav’s specialists can advise on integrating the Kukamet Pushrod Clamp 541 into existing tooling systems and ensure fast delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 541-4-L-Q18 GTIN: 8680731505498 SKU: 541-4-L-Q18 eClass: 21041716 ETIM: EC011973 Facts Weight: 0.915 kg Clamping force max: 4,500 N Holding force max: 7,200 N Piston diameter: 18 mm Special features Material: galvanised steel Spindle connection: M10x70 Mounting: horizontal foot Safety lock included FAQ What force ratings can be expected from this clamp? The clamp provides a clamping force of 4,500 N and a holding force of 7,200 N, values specified for the Kukamet Pushrod Clamp 541 to support robust workholding. Is the clamp suitable for use in humid or corrosive workshop environments? Yes, the galvanised steel construction offers enhanced corrosion resistance, making the 541 appropriate for workshops where moisture or light corrosion is a concern. How is the clamp mounted to fixtures and jigs? Mounting is via the horizontal foot; the connector accepts standard attachments and the M10x70 spindle simplifies mechanical integration into common fixture designs. Does the safety lock prevent accidental release during handling? The included safety lock is designed to secure the pushrod during loading and transport, reducing unintended opening and protecting the workpiece and operator. Can the clamp be used in automated stations or only manual fixtures? The mechanical design allows use in both manual fixtures and semi-automated stations where a compact, mechanically actuated clamp is required; confirm interface requirements with Metav Werkzeuge for integration details. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500 N Vertical Clamp With Safety Lock, M12x80 Spindle, Zinc-Plated - Kukamet
Benefit from compact design, high clamping force and a secure safety lock for dependable fixture performance. Order the 213 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 213 vertical clamp – Kukamet toggle clamp with safety lock and angle-foot mounting The 213 vertical clamp is a zinc-plated toggle clamp designed for vertical holding in jigs and fixtures, combining robust clamping performance with a compact footprint for production and workshop integration. Safety lock for secure clamping Angle-foot mounting for stable installation Zinc-plated finish for corrosion resistance 4,500 N maximum clamping force 5,000 N holding force for reliable grip Consistent, high-force clamping that improves cycle reliability The 213 vertical clamp delivers a repeatable clamping force of 4,500 N and a holding force of 5,000 N, ensuring stable workpiece retention during machining and assembly operations. The toggle mechanism creates a short travel with firm end-stop engagement, which reduces fixture play and contributes to predictable cycle times. Where repeatability and workplace throughput are essential, this clamp offers a compact solution that integrates with standard jig layouts while keeping setup times low. The zinc-plated finish also protects moving parts from corrosion, maintaining performance across production runs. Quick mounting and secure operation for safer workflows Fitted with an M12x80 spindle and an angle-foot mounting flange, the clamp installs directly to fixturing plates or subplates with a small footprint. The integrated safety lock prevents accidental opening under vibration or during handling, reducing the risk of unintentional release and improving operator confidence at the bench. Adjustability via the threaded spindle allows fine tuning of clamping position without additional components. This combination of fast installation and secure locking supports cleaner process control and fewer interruptions on the shop floor. Durable materials and compact dimensions for versatile use Constructed from zinc-plated steel and weighing 1.76 kg, the device balances robustness with easy handling for fixture assembly and maintenance. The low-profile vertical arrangement saves space on the tooling surface, making the clamp suitable for both manual jigs and automated stations where vertical retention is required. Its design suits a range of workshop tasks—from holding small components during fitting to securing parts for light machining—while the corrosion-resistant finish extends service life and reduces replacement frequency. Contact Metav Werkzeuge for tailored advice on integrating Kukamet clamps into fixtures—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 213-5-L GTIN: 8680731509861 eClass: 21041717 ETIM: EC011973 Brand: Kukamet Facts Weight: 1.76 kg Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Spindle thread: M12x80 Special features Material: zinc-plated Mounting type: angle-foot Safety locking mechanism included Category: Spanner Document: catalogue PDF available FAQ What clamping and holding forces does this clamp provide? The 213 vertical clamp provides a maximum clamping force of 4,500 N and a holding force of 5,000 N, offering secure retention for a wide range of fixture applications. How is the clamp mounted and adjusted? Mounting is via an angle-foot flange; adjustment is made using the M12x80 spindle on the Kukamet 213 clamp to fine-tune contact and position. Is the clamp protected against corrosion for workshop use? Yes, the 213 is zinc-plated, which offers reliable corrosion resistance suitable for industrial workshop environments. Does the clamp include a safety mechanism to prevent accidental release? The clamp features an integrated safety lock; the Kukamet 213's locking device prevents unintended opening under vibration or handling. What applications are typical for this type of vertical toggle clamp? Vertical toggle clamps like the 213 are commonly used in jigs and fixtures for assembly, light machining and inspection tasks where vertical retention and quick actuation are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500N Pneumatic Push‑Rod Clamp Horizontal Foot, Zinc Plated, 18mm Piston - Kukamet
Take advantage of robust linear clamping with a 4,500 N push capacity and 7,200 N holding force for dependable fixture retention. The galvanised construction and compact mass ensure corrosion resistance and straightforward integration into existing setups. Order the clamp directly via Metav Werkzeuge or consult the technical team for specification assistance. Kukamet Pneumatic Push‑Rod Clamp 661 — 4,500 N push force, galvanised The 661 pneumatic push‑rod clamp provides precise linear clamping for machine fixtures and assembly jigs, designed for horizontal mounting and demanding workshop use. 4,500 N maximum push force 7,200 N maximum holding force Galvanised steel construction Horizontal base for secure mounting Reliable clamping force for consistent machining The clamp delivers a measured 4,500 N pushing capacity and a 7,200 N holding rating, which translates to consistent part retention during machining and assembly operations. The linear actuator design converts compressed air into a direct axial force, reducing lateral movement and improving repeatability in batch production. By specifying the clamping force in new fixtures, process planners gain predictable clamping behaviour that supports cycle-time optimisation and reduces scrap rates. Durable finish and compact design for workshop environments Constructed from galvanised steel and weighing 1.836 kg, the unit resists corrosion while remaining light enough for rapid fixture changes. The galvanised surface ensures long service life in humid or coolant‑exposed environments without added coating requirements. The compact footprint and modest mass support retrofitting into existing tooling fixtures, limiting the need for extensive rework of jigs and saving machine downtime. Easy integration and clear mechanical data for system design Fitted with a piston Ø 18 mm, the actuator provides a balanced combination of speed and force for typical clamping cycles; the bore size supports quick response times while maintaining stable force delivery. The horizontal foot mounting enables secure attachment to machine beds and jigs, simplifying alignment and reducing assembly complexity. The device’s categorisation for clamping applications and standardised interface points mean control engineers can incorporate it into pneumatic circuits with minimal adaptation. Choose Kukamet pneumatic technology through Metav Werkzeuge to secure reliable, corrosion‑resistant clamping for production lines and fixtures; contact Metav Werkzeuge for ordering or specification advice Technical data Article number: 661-4-Q18 GTIN: 8680731503142 Weight: 1.836 kg Material: galvanised steel Facts Piston diameter: 18 mm Maximum push force: 4,500 N Maximum holding force: 7,200 N ECLASS: 21041716 ETIM: EC011973 Special features Horizontal foot mounting Category: Clamps / Spanners Finish: galvanised Manufacturer: Kukamet FAQ What maximum clamping and holding forces does the clamp provide? The Kukamet Pneumatic Push‑Rod Clamp 661 offers a maximum push force of 4,500 N and a holding force up to 7,200 N. Is the clamp suitable for humid or coolant‑exposed environments? Yes, the galvanised finish on the 661 provides enhanced corrosion resistance for workshop conditions involving humidity or light coolant exposure. How is the clamp mounted to fixtures? Mounting is via a horizontal foot; the horizontal base is intended for secure attachment to machine beds and fixtures. What is the piston diameter and why does it matter? The clamp uses a piston with a diameter of 18 mm; this bore provides a balance of rapid actuation and consistent axial force suitable for repetitive clamping cycles. Can the clamp be integrated into existing pneumatic circuits? The unit’s standardised linear actuator design and mounting arrangement allow straightforward integration into common pneumatic control systems and jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500N Push Rod Clamp 18mm Piston 8800N Holding Force Zinc-Plated Cast Body Wafer Horizontal Foot - Kukamet
Take advantage of a zinc-plated cast body, high holding force and compact design for reliable, space-saving workholding. Benefit from precise pressure adjustment via the M10×70 pressure spindle and order directly via Metav Werkzeuge or consult our specialists for application advice. Push-rod clamp 531 by Kukamet — horizontal-foot, 4,500 N clamping force The push-rod clamp 531 is a compact fixture clamp designed for secure workholding in general workshop and light industrial jigs, offering a horizontal-foot mounting for stable positioning. Zinc-plated cast body for corrosion protection Horizontal-foot mounting for stable attachment 4,500 N maximum clamping force Compact weight of 1.15 kg for easy positioning Consistent, measurable clamping performance for fixtures The clamp delivers a defined clamping force of 4,500 N with a holding force of 8,800 N, giving predictable workpiece retention during machining and assembly operations. The specified forces are measured values that support process reliability and reduce the need for trial-and-error setups. This consistency shortens setup time and minimises rework, which improves throughput on production lines and in job-shop environments. Robust materials and mounting for longer service life Constructed with a zinc-plated finish and a cast body, the device resists surface corrosion while retaining structural rigidity where it matters. The horizontal-foot mounting provides a low-profile attachment that suits fixture plates and bespoke jigs, and the included M10×70 pressure spindle enables fine adjustment of contact pressure. These features combine to reduce maintenance intervals and keep clamping behaviour stable over repeated cycles. Space-saving design with practical adjustment features With a piston diameter of 18 mm and a body mass of 1.15 kg, the clamp is compact and easy to integrate into confined toolrooms or automated cells. The lightweight construction supports fixture optimisation without compromising grip strength. The simple spindle adjustment lets operators set and repeat contact pressure quickly, supporting consistent results in batch production and manual assembly tasks. For tailored advice on integrating the Kukamet push-rod clamp 531 into fixtures, contact Metav Werkzeuge for specification support and application consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our team can recommend the optimal configuration for reliable results Technical data Article number: 531-4-Q18 Model: 531 GTIN: 8680731502831 ECLASS: 21041716 ETIM: EC011973 Manufacturer: Kukamet Numeric data Weight: 1.15 kg Max clamping force: 4,500 N Max holding force: 8,800 N Piston diameter: 18 mm Pressure spindle: M10×70 Materials & features Material: zinc-plated with cast body Mounting: horizontal foot Category: Spanner Type: lever clamp FAQ What maximum clamping force does the clamp provide? The Kukamet push-rod clamp 531 provides a maximum clamping force of 4,500 N, suitable for robust fixture work and stable part retention. What holding force can be expected from this fixture clamp? The fixture achieves a holding force of 8,800 N, which aids secure retention during machining and assembly processes. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot, allowing low-profile attachment to plates or jigs; the clamp includes an M10×70 pressure spindle for pressure adjustment. What materials form the clamp’s body and finish? The clamp is made with a cast body and a zinc-plated finish to improve corrosion resistance while maintaining structural strength. What are the key physical dimensions and weight? Key measurable data: piston diameter 18 mm and weight 1.15 kg, giving a compact footprint for confined fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500N Push Rod Clamp Vertical Base Zinc Plated, 1.07kg Holding Force 4650N - Kukamet
Reliable holding up to 4,500 N combined with a galvanised finish and a compact vertical-foot design make this clamp a robust choice for repetitive production fixturing; order the Kukamet 512 push-pull clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 512 push-pull clamp — galvanised, 4,500 N clamping force Kukamet 512 push-pull clamp for compact fixtures and repetitive assembly tasks, offering strong holding and a vertical mounting foot for stable installation Galvanised steel construction for corrosion resistance 4,500 N maximum clamping force for secure workholding Vertical mounting foot for compact, stable placement M10x70 pressure spindle for adjustable contact Consistent clamping where precision matters The Kukamet 512 push-pull clamp delivers a clear technical benefit: a 4,500 N clamping force with a holding force of 4,650 N, providing reliable retention for short-cycle operations and medium-duty fixtures. The galvanised steel construction reduces the risk of corrosion in workshop environments, which benefits uptime and consistency. For users less familiar with clamp specifications: clamping force is the peak force applied to hold a workpiece, while holding force refers to the maintained retention when the mechanism is engaged. This distinction helps in selecting the right unit for machining, assembly or inspection jigs. Quick fitting and compact installation to save setup time Designed with a vertical mounting foot, this clamp occupies a small footprint on a jig plate while delivering stable transfer of force into the fixture. The integrated M10x70 pressure spindle allows fine adjustment of contact length, simplifying alignment without additional shims. At 1.07 kg mass the unit is easy to position during assembly of a fixture yet substantial enough to remain vibration-resistant during handling. The compact layout supports denser fixture layouts and can contribute to shorter cycle times through faster clamping operations. Practical benefits for workshop and production use In production contexts where reliability and repeatability are priorities, this clamp reduces rework risk thanks to secure retention and predictable actuation. The mechanical simplicity of the design supports long-term serviceability and straightforward replacement in modular jigs. Where processes demand consistent part orientation during welding, bonding or inspection, the combination of robust retention and compact mounting enables more efficient fixture design and fewer clamp changes per shift. Low maintenance and dependable service life The galvanised finish and simple mechanical construction mean routine maintenance is limited to occasional cleaning and spindle lubrication, supporting continuous operation without complex servicing. The robust holding figures and corrosion resistance contribute to a longer service life, helping to reduce total cost of ownership in repetitive workflows. For further technical clarification or dimensional drawing requests, Metav Werkzeuge provides direct support and can supply additional documentation to verify fitment for specific fixtures. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 512 into existing fixtures — request detailed measurements or an application consultation via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical Data Article number: 512-6 (SKU) GTIN: 8680731502695 Manufacturer: Kukamet Facts Clamping force max: 4,500 N Holding force max: 4,650 N Weight: 1.07 kg Pressure spindle: M10x70 Special features Material: galvanised steel Mounting: vertical foot eCl@ss: 21041716 ETIM: EC011973 FAQ Is this clamp suitable for welding fixtures? The Kukamet 512 push-pull clamp (SKU 512-6) is suitable for welding fixtures where a robust, repeatable hold is required; the galvanised finish offers basic corrosion resistance in typical workshop atmospheres. Can the contact length be adjusted for different workpiece thicknesses? Yes, the clamp includes an M10x70 pressure spindle that enables adjustment of the contact length to suit varying component thicknesses and to fine-tune clamping engagement. What is the weight and how does that affect fixture design? The unit weighs 1.07 kg, which balances ease of handling with stability in fixtures; the compact vertical-foot mounting helps minimise the required plate area. How strong is the retention compared with similar clamps? With a maximum clamping force of 4,500 N and a holding force of 4,650 N, the Kukamet 512 provides secure retention comparable to mid-duty production clamps used in assembly and test jigs. Which material is used for the clamp body and why does it matter? The clamp is made from galvanised steel, which improves resistance to corrosion and extends service life in workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500N Vertical Clamp 180mm Arm, Massive Holding Arm With Safety Lock, Galvanised - Kukamet
The combination of a galvanised finish, a 180 mm arm and a robust holding mechanism delivers reliable, repeatable clamping for fixtures and jigs. With a holding force of 5,000 N and a secure safety lock, the unit supports efficient cycle times and safer handling. Order the Kukamet 211 vertical clamp directly via Metav Werkzeuge or consult our specialists for application guidance. 211 Vertical Clamp (211-5-D-L-C2) — galvanised, 180 mm arm by Kukamet A 211 vertical clamp engineered for secure, space-saving fixture work, featuring a horizontal-foot mount and a massive holding arm for dependable production clamping. Massive holding arm with safety lock Holding force up to 5,000 N 180 mm reach arm for deep clamping Horizontal-foot mounting for bench or jig Consistent clamping force for repeatable results The clamp delivers a holding force of 5,000 N and a compression force of 4,500 N, values that translate directly into stable, repeatable workholding. The distinction between holding and compression is important: holding force indicates the device’s capacity to keep a workpiece secured during operation, while compression force refers to the force applied when the clamp is engaged. This separation helps planners select a device that matches fixture dynamics and machining loads, reducing rework and downtime. Space-saving mounting and extended reach Designed with a horizontal foot for secure installation on workbenches or jigs, the device’s 180 mm arm provides access to deeper fixture points without obstructing adjacent tooling. The horizontal-foot attachment simplifies alignment on modular plates and reduces the need for additional adapter hardware. The compact footprint and 1.51 kg mass make integration into existing setups straightforward while maintaining machining envelope efficiency. Built to last with corrosion protection and safety Constructed from galvanised steel and equipped with a massive holding arm, the clamp resists corrosion in workshop environments and stands up to repeated cycles. The integrated safety lock prevents unintended opening under vibration or impact, decreasing the risk of workpiece movement and supporting operator safety. Minimal upkeep is required: occasional lubrication of the pivot points and visual inspection of the locking mechanism preserve performance over time. Practical use cases and operational benefit The vertical clamping device suits a range of workshop tasks such as fixture clamping, manual assembly stations and low-volume production jigs where quick, reliable engagement is essential. Its combination of robust construction and measured forces supports faster set-ups and consistent production runs, reducing cycle variability. The modest weight aids repositioning when layouts change, while the galvanised finish extends service life in mixed-environment shops. For application-specific advice on the Kukamet 211 vertical clamp and to confirm compatibility with a particular fixture, contact Metav Werkzeuge in Emmerich by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical Data Article number: 211-5-D-L-C2 GTIN: 8680731501445 Manufacturer: Kukamet Facts Weight: 1.51 kg Arm length: 180 mm Holding force: 5,000 N Compression force: 4,500 N ECLASS: 21041717 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm Safety lock Category: Spanner FAQ What clamping forces does the device provide? The Kukamet 211 vertical clamp provides a holding force of 5,000 N and a compression force of 4,500 N, specified for stable workholding in fixture applications. How is the clamp mounted to a bench or jig? Mounting is by a horizontal foot, allowing secure attachment to benches, fixture plates or modular jigs without additional adapters. Is the clamp suitable for frequent use in production? Yes, the galvanised finish and massive holding arm make the 211 suitable for repetitive production cycles with low maintenance requirements. What safety features are included? A dedicated safety lock prevents accidental opening under vibration or impact, improving operator safety and workpiece security. How heavy is the clamp and does that affect portability? The device weighs 1.51 kg, offering a balance between robustness and portability for repositioning within a workshop. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500N Vertical Clamp With Massive Holding Arm And Safety Lock, Galvanised - Kukamet
The combination of robust mechanical design and straightforward mounting makes this vertical clamp a reliable choice for fixtures where repeatable clamping force and operator safety are critical; benefit from the galvanised construction and the massive holding arm for long service life. Order the clamp directly via Metav Werkzeuge or consult our specialists for application-specific advice. Vertikalspanner 213 – Vertical clamp with 118.5 mm arm, galvanised (Kukamet) Vertikalspanner 213 is a heavy-duty vertical clamp designed for secure workholding in jigs, fixtures and production benches where durable, repeatable clamping is required Massive holding arm with safety lock Galvanised finish for corrosion resistance 118.5 mm rigid arm length Up to 5,000 N holding force Secure, repeatable clamping for production use The vertical clamp delivers defined mechanical performance through a combination of 4,500 N clamping force and 5,000 N holding force, ensuring components remain fixed during machining or assembly. The 118.5 mm arm provides a useful reach for a wide range of fixtures while the compact overall weight of 1.64 kg minimises added load on subassemblies. These measurable values support planning for cycle times and repeatability, enabling confidence in process stability and reduced rework. Safe mounting and quick integration into fixtures Engineered with an angle base for secure attachment, the device integrates easily into welded or bolted setups without complex adapters. The massive holding arm combined with a positive safety lock reduces accidental release and supports safer operator interaction during high-frequency cycles. The clamp’s toggle-style action provides a tactile, unambiguous open/closed state that simplifies visual checks in a busy production environment, contributing to faster changeovers and lower downtime. Durable finish and low-maintenance operation Manufactured in galvanised steel, the clamp resists corrosion in standard workshop atmospheres and requires only basic inspection to maintain performance. Robust construction and simple mechanics translate to long service life and predictable maintenance intervals, aligning with the needs of industrial and trade users seeking dependable workholding. Supplied by Kukamet and distributed through Metav Werkzeuge, the component fits into established procurement and stocking strategies for jigs and fixture systems. Contact Metav Werkzeuge for a specification check and to secure the Kukamet Vertikalspanner 213 for integration into production fixtures, or request tailored advice from Metav Werkzeuge’s technical team Technical data SKU: 213-5-D-L-C1 GTIN: 8680731502145 Brand: Kukamet Facts Arm length: 118.5 mm Weight: 1.64 kg Max clamping force: 4,500 N Max holding force: 5,000 N ECLASS: 21041717 ETIM: EC011973 Special features Mounting: angle base Material: galvanised steel Massive holding arm Safety lock Story trigger: lever clamp FAQ What clamping and holding forces are provided by this clamp? The Kukamet Vertikalspanner 213 offers a clamping force of 4,500 N and a holding force of 5,000 N, suitable for demanding fixture applications. How is the clamp mounted to a jig or fixture? Mounting is via an angle base; the design permits secure bolting to plates or welded assemblies for reliable fixture integration. Is the finish suitable for workshop environments? Yes, the galvanised construction gives the clamp enhanced corrosion resistance for standard workshop and production environments. Which brand and SKU should be specified for procurement? Specify Kukamet Vertikalspanner 213, SKU 213-5-D-L-C1, when ordering or requesting spare parts information. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500N Vertical Clamp With Massive Holding Arm, Safety Lock, 118.5mm Reach, Blackened Finish - Kukamet
Take advantage of the combination of a massive holding arm, safety locking mechanism and a high holding force for reliable, repeatable workholding. Benefit from compact dimensions and low weight for easy fixture layout; order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Vertikalspanner 213 — Kukamet vertical lever clamp with 118.5 mm arm and 5,000 N holding force The Vertikalspanner 213 is a vertical lever clamp designed for secure workholding in jigs, fixtures and production tooling where repeatable clamping and compact installation are required. Massive holding arm with safety lock Holding force up to 5,000 N 118.5 mm arm; weight 1.64 kg Secure, repeatable clamping to reduce rework and cycle time The 213 model provides a consistent clamping action that reduces part movement and the need for rework. With a holding force rated at 5,000 N and a maximum pressing force of 4,500 N, the device is specified for demanding fixture applications where reliable retention under load is essential. The vertical lever principle gives a clear open/closed status, while the built-in safety lock prevents accidental release, supporting uninterrupted production and fewer rejects. These technical characteristics translate directly into measurable process stability and improved output quality. Robust construction that lowers maintenance and extends service life The clamp is engineered with a massive holding arm and a durable blackened finish, combining rigidity with corrosion resistance for long-term use in workshop and shop-floor environments. At 1.64 kg and with an 118.5 mm arm length, the unit balances strength and compactness for tight fixtures. The heavy-duty arm reduces elastic deformation under load, which means sealing surfaces and locating features remain accurate for longer periods. Fewer adjustments and less downtime follow, delivering cost-efficiency over the component lifecycle. Quick integration into fixtures and flexible mounting options Designed for simple installation on an angle base, the device integrates into existing jigs with minimal adaptation. The lever action permits fast clamping and unclamping, helping to shorten cycle times in repetitive operations. The compact footprint and standardised mounting make the clamp suitable for series assembly, small-batch production and repair benches alike. Supplied as a single, ready-to-fit unit, the vertical lever clamp supports modular tooling concepts and rapid fixture changeovers, improving overall workplace ergonomics and throughput. For availability, technical clarification or tailored fixture recommendations for the Kukamet Vertikalspanner 213, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B213-5-D-L-C1 ECLASS: 21041717 ETIM: EC011973 Arm length: 118.5 mm Holding force: 5,000 N Pressing force (max): 4,500 N Weight: 1.64 kg Mounting: angle base Finish: blackened finish Massive holding arm Safety lock Brand: Kukamet FAQ What maximum holding force does the clamp provide? The Kukamet Vertikalspanner 213 offers a holding force of up to 5,000 N for secure retention in fixture applications. What are the dimensions and weight of the clamp? The lever arm measures 118.5 mm and the unit weighs 1.64 kg, making the clamp compact yet robust for tight installations. How is the clamp mounted in a jig or fixture? Mounting is by an angle base designed for straightforward installation into standard jigs and modular fixture plates. Is the finish suitable for workshop environments? Yes, the clamp is supplied with a blackened finish that improves surface resistance to wear and light corrosion during routine use. Does the product include a safety mechanism to prevent accidental release? The Vertikalspanner 213 features an integrated safety lock to prevent unintended opening during operation, supporting safer production processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500N Vertical Clamp With Safety Lock, Horizontal Foot, Zinc-Plated - Kukamet
Take advantage of the combination of robust clamping force, galvanised durability and an integrated safety lock to keep workpieces secure and processes uninterrupted — order the clamp directly via Metav Werkzeuge or consult our specialists for an optimised fixture layout. Vertikalspanner 211 – vertical toggle clamp with safety lock and M12x80 spindle (Kukamet) A compact Vertikalspanner 211 designed for secure vertical clamping in machining and assembly applications, featuring a horizontal foot mount for simple bench or fixture installation Vertical clamping action for space efficiency Galvanised steel construction for corrosion resistance Safety lock for secure, vibration-proof holding M12x80 adjustable pressure spindle Consistent, measurable clamping performance for reliable cycles The vertical toggle design delivers a clearly defined clamping force (4,500 N) and a holding force (5,000 N), making it suitable for repeatable workholding tasks in production runs. The defined forces reduce setup variance, so fixtures behave predictably during machining, punching or assembly operations. The lever mechanism converts manual input into strong downforce with low operator effort, shortening cycle times and improving process throughput. This quantifiable performance supports rational purchasing decisions by matching the clamp’s capability to the required machining loads. Built for longevity and safe operation in demanding environments Constructed from galvanised steel, the clamp offers improved resistance to corrosion where chips, coolant or humidity are present. The integrated safety lock prevents accidental release during vibration or incidental contact, increasing operator confidence and reducing the risk of workpiece displacement. Where occupational safety standards and consistent part quality are priorities, the mechanical lock provides an immediate, passive safeguard that requires no additional components. Simple mounting and fine adjustment to fit diverse fixtures The horizontal foot mounting simplifies attachment to plates or workbenches and is compatible with common jig layouts. The M12x80 pressure spindle allows precise preloading and height adjustment to accommodate varying workpiece thicknesses, and the device’s low mass (1.54 kg) eases handling during fixture changes. As a compact lever clamp, it integrates into confined layouts without sacrificing accessibility, supporting both manual and semi-automated production cells where space efficiency and quick set-up are required. Contact Metav Werkzeuge to specify a Kukamet vertical clamp for the intended application and to discuss fixture layout; Metav Werkzeuge can advise on integration and delivery from their Emmerich quality hub — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 211-5-L GTIN: 8680731501469 Manufacturer: Kukamet Model designation: 211 Category: Spanner Core specifications Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Weight: 1.54 kg Pressure spindle: M12x80 Materials & features Material: galvanised steel Mounting: horizontal foot Safety: integrated safety lock Arm: not applicable Classification: eClass 21041717 ETIM: EC011973 FAQ What is the difference between pressing force and holding force? The pressing force refers to the downward clamping action (4,500 N) while the holding force (5,000 N) indicates the clamp’s resistance to separation; the Vertikalspanner 211 is rated with both values to clarify performance under load. Can the clamp be adjusted for different workpiece heights? Yes, the M12x80 pressure spindle allows fine height adjustment so the clamp can be set to varying material thicknesses while maintaining secure engagement. Is the clamp suitable for humid or coolant-prone environments? The galvanised finish gives the device enhanced corrosion resistance, making it appropriate for environments with occasional exposure to coolant or humid conditions. How is the clamp mounted to a fixture? The horizontal foot is intended for screw fastening to plates or benches; the compact base simplifies integration into common jig and fixture designs. Does the clamp prevent accidental opening during machining? An integrated safety lock secures the lever in the closed position, reducing the chance of accidental release from vibration or incidental contact during operations involving the Vertikalspanner 211 (SKU 211-5-L) Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4500N Vertical Clamp With Safety Lock, M12x80 Thread, Black Oxide Finish - Kukamet
The compact vertical clamp combines a 5,000 N holding force with a 4,500 N maximum clamping force and a secure safety lock, delivering reliable fixture retention in tight setups; order the vertical clamp directly via Metav Werkzeuge or consult our technical advisers for application support. Vertikalspanner 213 – Kukamet vertical clamp with safety lock and angle-foot mount The Vertikalspanner 213 is a vertical lever clamp designed for workshop and industrial fixturing, offering high holding and clamping forces in a compact, easy-to-mount package Robust blackened finish for corrosion resistance 5,000 N maximum holding force 4,500 N maximum clamping force Angle-foot mounting with safety lock Consistent clamping for uninterrupted production Precision in fixture retention reduces rework and stops. The vertical clamp provides 5,000 N of maximum holding force and a 4,500 N clamping rating, values that secure components during machining or assembly and help ensure repeatable results. The relatively low mass of 1.76 kg supports compact fixture design and reduces inertia during handling. By specifying force values and construction, the clamp offers a measurable basis for planning process parameters and selecting complementary locating elements for jigs and tooling. Safe, fast operation that suits daily shop routines A mechanical safety lock prevents unintentional release and increases operator confidence at the workbench. The lever-style actuation enables rapid clamping cycles, while the M12x80 pressure spindle allows precise adjustment of contact pressure. The angle-foot mounting provides a stable base for installation on angled or vertical plates, simplifying integration into existing fixtures. For production environments where speed and safety are both priorities, this clamp balances quick set-up with a clear risk-reduction feature. Durable finish and compact design for versatile use The blackened finish offers surface protection and a low-reflective appearance that suits industrial settings. The compact footprint and lever operation make the clamp suitable for confined fixtures and modular tooling systems, where space optimisation is essential. Built for repetitive use, the design supports straightforward maintenance and replacement of wear parts without complex procedures, making it a practical choice for workshops and small-series production alike. For reliable fixture holding from Kukamet, contact Metav Werkzeuge in Emmerich for specification assistance and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B213-5-L GTIN: 8680731508093 ECLASS: 21041717 ETIM: EC011973 Facts Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Weight: 1.76 kg Pressure spindle: M12x80 Special features Blackened finish Angle-foot mounting Safety lock included Category: Spanner Lever clamp design FAQ What clamping force can be expected from this vertical clamp? The vertical clamp delivers a maximum clamping force of 4,500 N and a holding force of 5,000 N for secure retention during machining and assembly. Is a safety mechanism included with the clamp? Yes, the clamp features an integrated safety lock that prevents accidental release during operation. How is the clamp mounted to a fixture plate? The device uses an angle-foot mounting for secure attachment to vertical or angled plates; the pressure spindle is specified as M12x80. What surface treatment does the clamp have and why does it matter? The clamp has a blackened finish, providing enhanced surface protection and a subdued appearance that suits industrial environments. Can the clamp be used in compact fixture layouts? The clamp’s compact design and lever actuation make it well suited to confined fixtures and modular tooling systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45mm Closing Clamp Horizontal Foot 1,000 N Thrust, 1,500 N Hold - Kukamet
Take advantage of a robust stainless‑steel toggle latch that combines high holding capacity with simple installation; the built‑in hook and horizontal foot ensure secure, repeatable fastening in jigs, fixtures and enclosures. Order directly via Metav Werkzeuge or consult the team for specification support. 351 toggle latch — stainless‑steel closure clamp with hook by Kukamet The 351 toggle latch is a stainless‑steel closure clamp with a hook and horizontal foot, designed for secure, repeatable fastening in industrial fixtures and equipment. Stainless‑steel construction for corrosion resistance Hook-equipped for positive locking engagement Horizontal foot for straightforward mounting 1000 N closing force and 1500 N holding force Secure, repeatable fastening for production use Built from stainless steel, this latch delivers dependable corrosion resistance while remaining suitable for demanding workshop environments. The combination of a hook mechanism and a horizontal base produces a positive mechanical engagement that resists vibration and shock, translating into fewer process interruptions. The measurable 1000 N closing force and 1500 N holding force provide quantifiable performance data for layout planners and quality engineers, supporting risk‑based decisions in assembly and fixture design. Quick installation and straightforward adjustment The horizontal mounting foot and standardised thread length of 45 mm simplify integration into existing fixtures and plates. The threaded connection enables fine adjustment of clamp engagement without disassembly, which reduces machine downtime during setup. As a compact component with a mass of just 0.135 kg, the latch adds minimal weight to assemblies while enabling a high degree of positional accuracy when aligning mating parts. Designed for practical workshop handling and maintenance Operation is intuitive thanks to the lever action: fast locking and unlocking accelerates repetitive tasks while maintaining safety through the positive hook engagement. Accessibility for inspection and routine maintenance is improved by the simple geometry; parts are easy to visually check and replace if required. The latch’s material choice and construction reduce the need for frequent replacement, supporting a lower total cost of ownership through durability and predictable life cycles. Benefits for engineers and procurement teams Specification is simplified by clear technical values and common mounting conventions. The latch offers a compact solution where secure closure and easy handling are priorities, for example in tool fixtures, transport boxes and machine covers. Selecting this clamp supports standardisation across production cells and contributes to consistent assembly quality owing to its measured holding characteristics and repeatable mechanical behaviour. For specification advice or assistance with integration, contact Metav Werkzeuge — their specialists can confirm suitability for specific fixtures and provide supply options from Emmerich to the workshop. Technical Data SKU: S351-1 GTIN: 8680731504132 eClass: 21041718 Brand: Kukamet Core specifications Weight: 0.135 kg Thread length: 45 mm Maximum closing force: 1000 N Maximum holding force: 1500 N Features and materials Material: stainless steel Mounting: horizontal foot With hook for positive locking Category: toggle latch / closure clamp FAQ What materials is the latch made from? The latch is manufactured from stainless steel, giving the 351 toggle latch good corrosion resistance for workshop and industrial environments. What loads can the latch handle? Maximum closing force is specified at 1000 N and maximum holding force at 1500 N for the 351 closure clamp (SKU S351-1). How is the latch mounted? The component uses a horizontal foot for mounting and a threaded connection with a 45 mm thread length for adjustment and fixation. Is the latch suitable for vibration-prone applications? Yes, the hook-equipped design of the 351 toggle latch provides positive engagement that resists loosening under vibration. Can the latch be adjusted without disassembly? Adjustment is possible via the threaded link, allowing fine tuning of engagement without removing the latch from the assembly. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Closure Clamp Vertical Foot With Hook, 1000N Closing Force, 1.5kN Holding Force, Blackened - Kukamet
Robust clamping performance combined with compact, corrosion-resistant construction ensures reliable fixture hold and simple integration into workshop jigs. Benefit from up to 1,500 N holding force and a 1,000 N clamping force for repeatable results. Order the lever clamp directly via Metav Werkzeuge or ask our consultants if needed. 312 Lever Clamp — vertical-foot design with hook, by Kukamet A 312 lever clamp engineered for secure workholding across metalworking and general workshop fixtures, featuring a vertical foot and integrated hook for flexible mounting and quick operation Vertical foot for stable mounting Hook-equipped for diverse clamping setups Up to 1,500 N holding force Black blued finish for corrosion resistance Consistent, measurable clamping for higher throughput The clamp delivers defined clamping force and holding force, rated at 1,000 N and 1,500 N respectively, which reduces variability during machining and assembly operations. Defined forces make process planning easier: cycle times and feed rates can be set with greater confidence because the workpiece is held consistently. For teams focused on efficiency, the quantifiable performance of this device supports faster set-ups and fewer stoppages due to slipped or shifted parts. The precise numbers shown are directly relevant to production engineers specifying fixtures for repeatable batches. Compact construction that resists workshop wear A compact, black blued finish protects the metal surface while keeping the overall mass low at 0.135 kg, permitting use in space-constrained jigs and lightweight fixtures. The vertical-foot mounting gives a low profile and direct load path into the fixture plate, reducing lever-induced moments that can deform small components. The finish provides corrosion resistance in humid or coolant-exposed environments, extending service life and reducing maintenance frequency. These design choices combine to offer a durable component that integrates into daily workshop routines without adding bulk. Flexible mounting and rapid operation for varied tasks Equipped with an integrated hook, the clamp supports alternative latching arrangements and quick-release set-ups, making it suitable for both one-off benches and repetitive production. The 45 mm thread length allows for adjustability when compensating for varying workpiece heights or locating spacers, while the vertical foot ensures secure anchorage to the fixture plate. This adaptability shortens fixture iteration time and enables the same clamp to be re-used across different assemblies, lowering inventory complexity and improving operational agility. Straightforward procurement and traceability for production use Identified by SKU B312-1 and GTIN, the clamp is suitable for inclusion in standard parts lists and ERP systems, simplifying stock control and reordering. The compact specification and clear numerical performance data make it simple to compare with alternative clamps when defining tooling kits. Supplied by a known manufacturer, the component supports consistent replacement cycles and predictable supply. For procurement teams, the clear technical data and small footprint mean fewer variants stored on the shop floor and streamlined toolroom management. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 312 lever clamp into fixtures and for prompt supply from Emmerich—technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B312-1 GTIN: 8680731508307 Model: 312 Brand: Kukamet eClass: 21041718 ETIM: EC011973 Core measurements Weight: 0.135 kg Maximum clamping force: 1,000 N Maximum holding force: 1,500 N Thread length: 45 mm Materials & features Finish: black blued Mounting type: vertical foot Hook: yes Special features: none FAQ What clamping and holding forces does this clamp provide? The Kukamet 312 lever clamp specifies a clamping force of 1,000 N and a holding force of 1,500 N, values intended to support repeatable workholding in fixture applications. Can the clamp be mounted on standard fixture plates? Yes, the vertical foot design allows secure attachment to fixture plates; the 45 mm thread length gives room for adjustment when compensating for different workpiece heights. Is the finish suited to coolant-exposed environments? The black blued finish on the clamp offers improved surface protection and helps resist corrosion in typical workshop conditions. Which SKU should be ordered for stock replenishment? Order using SKU B312-1 (GTIN 8680731508307) to ensure the correct Kukamet lever clamp variant is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45mm Toggle Clamp Vertical Base With Hook, 1,500 N Thrust, Zinc Plated - Kukamet
Take advantage of the combination of a galvanised steel body, a vertical base for compact mounting and clear mechanical ratings (1,500 N clamping, 2,000 N holding) to ensure reliable fixture performance in production and workshop environments. Order the clamp directly via Metav Werkzeuge or consult our advisors for application matching. Kukamet 312 Toggle Clamp — vertical base, hook, 1,500 N clamping force A 312 toggle clamp designed for secure, repeatable temporary fastening in jigs, fixtures and small-assembly applications, featuring a vertical base and integrated hook for flexible mounting Vertical base for compact mounting Galvanised steel body for corrosion resistance 2,000 N holding force for secure clamping Durable, corrosion-resistant construction that lasts The galvanised finish and robust steel construction provide a durable surface that resists workshop wear and moisture, extending service life and reducing replacement frequency. Built for frequent use, this latch-style clamp combines a compact footprint with steady mechanical performance, allowing machine shops and assembly lines to rely on consistent results. The Kukamet 312 is engineered to maintain clamping integrity in routine production, reducing downtime associated with corroded or failed fasteners. Clear mechanical performance for predictable results Rated with a maximum clamping force of 1,500 N and a holding force of 2,000 N, the unit separates the actuating pressure from the sustained holding capability; the working stroke generates the clamp action while the latch maintains the load. These figures provide a verifiable basis for fixture design, enabling straightforward integration into jigs where specific force thresholds are required. The numeric ratings support engineering decisions and help ensure safe, repeatable clamping across batches. Space-saving vertical base and hook for flexible installation A vertical base allows installation on narrow fixture edges or small pallets, while the integrated hook provides a simple engagement point for tensioned closures; the thread length 45 mm accommodates adjustment during setup. With a weight of 0.175 kg, the device is lightweight yet stable, simplifying handling during fixture assembly. The compact design supports lean production layouts and quick retrofits without major fixture redesigns, helping maintain throughput in constrained workspaces. Contact Metav Werkzeuge for tailored procurement and technical matching of the Kukamet 312 toggle clamp — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise specification support and supply from Emmerich Technical data SKU: 312-2 GTIN: 8680731502343 Brand: Kukamet eClass: 21041718 ETIM: EC011973 Facts Maximum clamping force: 1,500 N Maximum holding force: 2,000 N Thread length: 45 mm Weight: 0.175 kg Special features Material: galvanised Mounting: vertical base With hook: yes File: 312-katalogseite.pdf FAQ What are the rated clamping and holding forces? The clamp is rated for a maximum clamping force of 1,500 N and a maximum holding force of 2,000 N when used as a toggle latch in a properly designed fixture. Is this clamp suitable for narrow fixture edges? Yes, the vertical base design enables secure mounting on narrow edges and compact pallets, making it suitable for constrained fixture layouts. Can the hook be adjusted for different engagement lengths? The hook works with the 45 mm thread length to allow adjustment during setup; the mechanism permits fine tuning for consistent engagement. What materials and finishes are used? The body is galvanised, providing corrosion resistance suitable for typical workshop and assembly environments. Which SKU should be ordered for this model? Order the model under SKU 312-2; the product is listed as a Kukamet 312 toggle clamp for fixture and jig applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com