Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
550 N Pushrod Clamp Horizontal Foot, Metal Handle, Stainless Steel - Kukamet
The combination of stainless steel construction, a metal handle and a compact horizontal base delivers durable, corrosion-resistant clamping with reliable repeatability; the defined 550 N clamping force and 700 N holding force support consistent fixture performance. Order the clamp directly via Metav Werkzeuge or consult the team for integration advice. Kukamet 511 Rod Clamp — stainless steel, metal handle, horizontal base The Kukamet 511 rod clamp is a compact horizontal-base clamping device intended for light assembly, jigs and fixture applications where repeatable, corrosion-resistant holding is required. Stainless steel construction Metal handle for robust operation Horizontal base for stable mounting 700 N maximum holding force Consistent force for reliable process control The 511 delivers clearly defined force values that improve process stability: a 550 N clamping force for active clamping and a 700 N holding force that resists part displacement during handling. These figures indicate the clamp’s capacity to keep small components secure during assembly and intermittent machining operations. Specifying these forces in planning reduces trial-and-error on the shop floor and supports predictable cycle times, which aids root-cause analysis and quality assurance. Built to last in demanding environments Constructed from stainless steel and fitted with a metal handle, the device resists corrosion and mechanical wear that typically shorten clamp life. The material choice minimises maintenance and replacement frequency in humid or washdown-prone environments. As a result, maintenance intervals are extended and lifecycle costs fall, while surface quality of clamped parts is preserved thanks to smooth, robust contact surfaces. Compact mountings for flexible jig design A horizontal base offers a low-profile mounting option for modular fixtures and compact benches. The adjustable M4x25 spindle enables fine position setting and repeatable contact pressure without specialised tools. With a light mass of approximately 0.087 kg, the clamp simplifies layout changes and reduces the load on movable sub-assemblies, supporting rapid fixture reconfiguration and efficient small-batch production. Practical benefits for workshops and small-scale production The rod-style clamp is suitable where dependable, repeatable holding is needed without the bulk of larger toggle clamps. Integration into fixtures and assembly jigs is straightforward thanks to standard mounting geometry and the compact footprint. The result is reduced setup time and fewer stoppages due to unsecured parts, which translates into higher throughput and improved operator confidence during repetitive tasks. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 511 rod clamp into existing fixtures and for assistance with order and logistics from Emmerich. Technical Data SKU: S511-0-M GTIN: 8680731506716 Article designation: Rod clamp 511 Manufacturer: Kukamet Material: stainless steel Facts Maximum clamping force: 550 N Maximum holding force: 700 N Spindle thread: M4x25 Weight: 0.087 kg ECLASS: 21041716 ETIM: EC011973 Special features Horizontal base mounting Metal handle Compact, low-profile design Suitable for jigs and light assembly fixtures FAQ What clamping and holding forces does the clamp provide? The clamp provides a maximum clamping force of 550 N and a maximum holding force of 700 N as specified for the Kukamet 511 rod clamp. Is the clamp suitable for corrosive or washdown environments? Yes, the stainless steel construction of the Kukamet 511 makes it appropriate for environments where corrosion resistance is required. How is the clamp mounted to a fixture? The device uses a horizontal base for stable mounting and an M4x25 spindle for positional adjustment; SKU S511-0-M details are available in the technical data. Can the clamp be used in compact jigs and benches? The compact, low-profile design and light weight of the 511 facilitate use in tight fixture layouts and modular bench systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550 N Vertical Clamp Stainless Steel Vertical Foot Clamp, 700 N Hold Force - Kukamet
Take advantage of a stainless steel build, precise 550 N clamping force and compact weight for dependable light‑duty fixturing; order the clamp via Metav Werkzeuge or request tailored advice from our consultants. Vertical clamp 212 by Kukamet — stainless steel, 550 N clamping force The vertical clamp 212 is a compact vertical clamping device for light‑duty fixtures and assembly operations, combining corrosion‑resistant construction with a low overall mass and a vertical foot for stable mounting. Stainless steel construction 550 N clamping force specification 700 N holding force capacity M4x25 pressure spindle Robust stainless steel design for long service life The stainless steel housing and components provide reliable resistance to corrosion and wear, making the clamp well suited to workshop and light industrial environments where longevity matters. The choice of stainless material reduces the need for frequent replacements and supports consistent clamping behaviour under repeated cycles. Corrosion resistance also simplifies maintenance routines, so cleaning and inspection remain straightforward even in humid or contaminant‑exposed workplaces. This supports steady production uptime and reduces unscheduled tool changes. Precise and predictable clamping performance Engineered to deliver a 550 N clamping force and a 700 N holding force, this device offers measurable and repeatable retention for small workpieces and assembly jigs. The specified forces enable planners to match fixture capability to component weight and processing demands; the compact force ratings are ideal for delicate parts that require secure restraint without distortion. The integrated M4x25 pressure spindle allows fine adjustment of contact pressure, converting specification into practical control at the clamping interface and ensuring consistent process results. Space‑saving mounting and simple integration With a vertical foot mounting arrangement and a mass of just 0.072 kg, the clamp is designed for installations where space is limited and every gram counts. Its compact footprint facilitates placement within multi‑station fixtures or modular tooling plates without significant redesign. The vertical mounting orientation aligns clamping action with gravity in many applications, improving repeatability for stacked or vertically oriented assemblies. Integration into existing systems is achieved with minimal alteration, enabling quick retrofits and shorter setup times. Operational benefits and workshop suitability The unit’s modest dimensions and stainless construction make it particularly suitable for small production lines, prototyping benches and maintenance tooling. The combination of low weight and clear force data supports ergonomic handling during fixture assembly and straightforward documentation in process sheets. Maintenance mainly involves periodic inspection of the pressure spindle and contact surface, preserving clamping integrity with minimal downtime. The specification provides a clear basis for selecting the clamp for tasks that demand predictable, gentle restraint rather than high‑force machining clamps. For dependable stainless‑steel clamping from Kukamet, request a specification check or order through Metav Werkzeuge — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice and local supply from Emmerich. Technical data Article number: S212-0 GTIN: 8682843523261 Model: 212 Manufacturer: Kukamet Facts Clamping force max: 550 N Holding force max: 700 N Weight: 0.072 kg Pressure spindle: M4x25 eClass: 21041717 ETIM: EC011973 Special features Material: stainless steel Mounting type: vertical foot No special additional features indicated Suitable for light‑duty fixturing and assembly FAQ What application is the clamp designed for? The vertical clamp 212 from Kukamet is intended for light‑duty fixtures, assembly jigs and situations requiring secure but gentle restraint of small workpieces. How are clamping and holding forces specified? Clamping is specified as 550 N maximum and holding capacity as 700 N for the Kukamet vertical clamp S212-0, providing measurable values for process planning. Which mounting arrangement is required? The unit uses a vertical foot mounting, designed for installation on fixture plates or tooling blocks with the clamp acting vertically. What material is used for the clamp body? The clamp body and components are made from stainless steel, offering corrosion resistance appropriate for workshop environments. Is the pressure spindle adjustable? Yes, the clamp is fitted with an M4x25 pressure spindle for fine adjustment of contact pressure at the clamping surface. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550 N Vertical Clamp, Horizontal Base, Metal Handle, Stainless Steel, 700 N Holding Force - Kukamet
A compact stainless steel vertical clamp that combines 550 N clamping force with up to 700 N holding force for secure, repeatable workholding; the horizontal base and metal handle make mounting and operation straightforward. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 211 — Kukamet vertical clamp with stainless steel construction and horizontal base The Vertikalspanner 211 is a robust vertical clamp designed for light industrial and workshop workholding, offering dependable fixation for fixtures and jigs. *Stainless steel construction for durability *Horizontal base for easy mounting *550 N clamping force for reliable holding *Metal handle for positive operation Dependable holding where precision matters Constructed from stainless steel, this vertical clamp delivers a defined combination of 550 N clamping force and 700 N maximum holding force, values that translate directly into reliable part retention during manual operations and low-force machining. Specifying these figures makes it clear how the clamp performs under load: the clamping force describes the applied pressure during actuation, while the holding force describes the sustained resistance against part displacement. This clarity supports planning for fixture design and risk reduction in repetitive processes. Quick installation and robust operation for efficient workflows The horizontal base design allows simple integration into T-slotted tables, fixture plates or welded frames, reducing setup time during changeovers. A metal handle ensures positive actuation and long service life, even under frequent use. At just 0.08 kg, the unit is light enough for retrofitting existing jigs without adding significant mass, yet engineered to resist corrosion and mechanical wear. The result is a compact clamping solution that improves operational uptime and lowers the need for frequent replacement. Practical applications and measurable process benefits Ideal for small fixtures, assembly stations and inspection jigs, this vertical clamp supports repeatable positioning and consistent clamping force, which in turn reduces rework and inspection cycles. Using a compact, stainless device for routine clamping contributes to a tidy workstation and fewer unplanned interruptions. The straightforward mechanics mean simple maintenance and predictable behaviour when incorporated into manual or semi-automated production processes; the Vertikalspanner 211 offers a pragmatic balance between durability and ease of use. For procurement advice or to arrange supply from our European hub, contact Metav Werkzeuge for personalised guidance and prompt delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: S211-0-M GTIN: 8680731509106 EClass: 21041717 ETIM: EC011973 Article name: Vertikalspanner 211 Manufacturer: Kukamet Core figures Weight: 0.08 kg Clamping force (max): 550 N Holding force (max): 700 N Materials & special features Material: Stainless steel Fastening: Horizontal base (waagerechter Fuß) Handle: Metal (Griff aus Metall) Clamping spindle: M4x25 Category: Spanner FAQ What do the clamping and holding forces mean in practical terms? Clamping force (550 N) denotes the force applied during activation; holding force (700 N) indicates the maximum sustained resistance against displacement. These values show how the Vertikalspanner 211 performs under load and help when designing fixtures. Which mounting options are compatible with this clamp? The horizontal base is suited to T-slot tables, fixture plates and flat mounting surfaces; the compact footprint allows straightforward retrofitting into existing jigs without major modification. Is the clamp suitable for corrosive workshop environments? Constructed from stainless steel, the clamp offers enhanced resistance to corrosion compared with untreated steel, supporting longevity in demanding workshop conditions. What maintenance is required for reliable operation? Periodic inspection of the spindle and handle for wear, occasional lubrication of moving parts and checking the mounting fasteners keep the vertical clamp functioning reliably over time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550 N Vertical Clamp, Metal Handle, Zinc Plated, 700 N Holding Force - Kukamet
Combine robust zinc-plated construction with a compact design and reliable 700 N holding force for dependable vertical clamping in fixtures and jigs; the metal handle and M4 x 25 pressure spindle allow quick setup and consistent pressure. Order the clamp directly via Metav Werkzeuge or consult the specialists for tailored advice. Vertical clamp 212 — vertical clamp, zinc-plated with metal handle (Kukamet) Vertical clamp 212 is a compact, zinc-plated vertical-foot clamping device delivering controlled clamping and holding forces for workshop and production fixture applications. Zinc-plated corrosion protection Metal handle for robust operation Vertical-foot mounting for stable setup 700 N maximum holding force Robust clamping performance for precise fixture work The Vertical clamp 212 offers a clear technical advantage where repeatable holding is required. With a maximum clamping force of 550 N and a maximum holding force of 700 N, the device secures components reliably in jigs and assembly stations. The zinc-plated finish provides basic corrosion resistance suitable for workshop environments, while the metal handle ensures long-term mechanical integrity. Stated forces are expressed in newtons to allow direct comparison with other clamping elements in engineering specifications. Practical mounting and adjustment for production use Designed for vertical-foot mounting, the clamp installs directly onto base plates or fixture rails for compact layouts. The integrated pressure spindle M4 x 25 enables fine axial adjustment of contact pressure and compensates for minor workpiece height variations, which simplifies set-up and reduces fixture changeover time. Where clamping and holding forces differ, the first value refers to the applied pressing capacity and the second to residual retention — understanding this distinction assists in selecting the correct clamping element for dynamic or static loads. Compact, lightweight savings with durable operation At just 0.08 kg, the unit is lightweight yet durable, making it suitable for dense fixture designs where space and mass are at a premium. The combination of zinc-plated surface and a metal handle delivers a balance of corrosion protection and mechanical robustness ideal for repetitive clamping cycles. Sourcing through Metav provides the reassurance of a European quality filter: reliable supply from Emmerich, a broad product range for consolidated procurement, and an established partner for industrial measurement and tooling needs. For a dependable, space-saving clamping solution from Kukamet, contact Metav Werkzeuge for procurement and technical guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 212-0-M GTIN: 8682843520260 Material: Zinc-plated Model: 212 SKU: 212-0-M Core technical data Max. clamping force: 550 N Max. holding force: 700 N Pressure spindle: M4 x 25 Weight: 0.08 kg eCl@ss: 21041717 ETIM: EC011973 Special features Metal handle Vertical-foot mounting Zinc-plated finish FAQ What clamping and holding forces does this clamp provide? The Vertical clamp 212 offers a maximum clamping force of 550 N and a maximum holding force of 700 N, making it suitable for common fixture and jig retention tasks. How is the clamp mounted in a fixture? Mounting is by a vertical foot arrangement; this vertical-foot mounting secures the clamp to base plates or fixture rails for stable positioning in production setups. What adjustment is available for contact pressure? Contact pressure is set via the M4 x 25 pressure spindle, which allows fine axial adjustment to adapt to slight workpiece height variations. Is the surface finish suitable for workshop environments? The zinc-plated finish provides corrosion resistance appropriate for general workshop conditions; the metal handle adds mechanical durability for repetitive operation. Can the clamp be used in tight, space-constrained fixtures? Yes, at 0.08 kg the unit is compact and lightweight, designed for space-efficient fixture arrangements while maintaining reliable holding performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550 N Vertical Toggle Clamp Vertical Foot Mount, 700 N Hold Force, Blackened Finish - Kukamet
Take advantage of the compact design with 700 N holding force and 550 N clamping force, combined with a fine-adjustment pressure spindle (M4 x 25) for repeatable fixtures. Secure supply and expert advice are available via Metav Werkzeuge — order the 212 vertical clamp directly through Metav Werkzeuge or consult the team for application guidance. 212 Vertical clamp by Kukamet — 700 N holding force, vertical foot mounting A 212 vertical clamp designed for secure vertical clamping in jigs, fixtures and assembly applications where compact size and reliable repeatability are required 700 N maximum holding force 550 N maximum clamping force Vertical foot mounting for vertical use Pressure spindle M4 x 25 for fine adjustment Consistent clamping force for repeatable production The clamp delivers a 700 N holding force and 550 N clamping force, providing a stable hold for small to medium workpieces. The clear numerical values support process planning and machine integration, helping to reduce rework and increase throughput. Thanks to its compact footprint and low weight, the device is well suited for fixtures where space is limited but consistent pressure is crucial. The mechanical design emphasises repeatability, which supports efficient, measurable production routines. Precise adjustment and simple integration A threaded M4 x 25 pressure spindle enables incremental adjustment of contact pressure and position, facilitating fine tuning directly at the fixture. The vertical foot mounting allows straightforward installation on vertical surfaces and plates, simplifying retrofits and custom jig builds. The lightweight construction reduces load on moving subassemblies while the clear mounting style helps planners and fitters estimate fixture layout quickly and accurately. Robust finish for workshop conditions The clamp is supplied in a black blued finish that resists corrosion in general workshop environments and maintains a professional appearance over time. The surface treatment combines visual durability with practical protection during handling and assembly operations. This finish supports long-term serviceability and fits well into mixed-material workstations without introducing significant maintenance requirements. Minimal complexity, high reliability With no additional arm fitted and no special accessories required, the component offers a straightforward mechanical solution for vertical clamping tasks. The simple kinematics reduce adjustment points and potential failure modes, supporting predictable life cycles and ease of replacement within maintenance routines. The compact mass and clear specification make it an effective choice for both single-station jigs and larger fixture arrays. Secure supply of Kukamet components via Metav Werkzeuge — contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B212-0 GTIN: 8682843522257 eClass: 21041717 ETIM: EC011973 Facts Maximum holding force: 700 N Maximum clamping force: 550 N Weight: 0.072 kg Pressure spindle: M4 x 25 Special features Material: Black blued Fastening type: Vertical foot Arm: Not applicable Special feature: None FAQ What holding force does the clamp provide? The clamp delivers a maximum holding force of 700 N, specified for reliable retention in fixture applications. Is the clamping pressure adjustable? Yes, the component uses an M4 x 25 pressure spindle for fine adjustment of clamping pressure and contact position. How is the clamp mounted? The device is designed for vertical foot mounting, enabling straightforward installation on vertical plates and fixture bases. What surface finish does the product have? The clamp is supplied with a black blued finish, offering practical corrosion resistance suitable for workshop conditions. Which SKU identifies this clamp? This product is listed as SKU B212-0 and is identified by GTIN 8682843522257 for ordering and inventory purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Push Rod Clamp Horizontal Base Zinc Plated, 700N Hold Force - Kukamet
Compact, zinc‑plated and designed for horizontal mounting, the 511 Push‑rod clamp delivers a dependable holding force of 700 N together with a maximum pressure force of 550 N, ensuring secure workpiece retention in repetitive fixtures; order directly via Metav Werkzeuge or ask our consultants for application advice. 511 Push‑rod clamp – horizontal base, zinc‑plated by Kukamet The 511 Push‑rod clamp is a compact clamping element for horizontal mounting, suited to fixture and jig applications where space is limited and consistent clamping force is required. Zinc‑plated corrosion resistance Horizontal mounting base Max holding force 700 N Pressure spindle M4x25 Consistent clamping force for reliable production Built for repetitive use, this clamp offers a holding force of 700 N and a maximum pressure force of 550 N, values that translate into stable workpiece fixation during machining and assembly tasks. The listed forces describe the clamp’s ability to resist movement under load: the holding force indicates sustained retention once engaged, while the pressure force denotes the maximum actuation force applied by the spindle. These measurable characteristics support process reliability and reduce scrap caused by slippage, making the component suitable for small to medium production runs where predictable clamping behaviour is essential. Space-saving mounting and straightforward integration The compact design and horizontal mounting base allow the clamp to be integrated into confined fixture layouts without complex modifications. A M4x25 pressure spindle enables fine adjustment of contact pressure and straightforward replacement if required. At just 0.092 kg, the unit minimises added mass on moving fixtures and is easy to position during assembly. The simple mounting geometry reduces engineering time for jigs and makes retrofitting to existing pallets or benches efficient, lowering installation effort while maintaining repeatable clamping engagement. Durable finish and low-maintenance operation Constructed from zinc‑plated material, the clamp resists corrosion in typical workshop environments and preserves reliable contact surfaces over time. The protective finish reduces the need for frequent maintenance and preserves dimensional stability during regular use. As a robust clamping element, it is aimed at technicians and production engineers seeking dependable fixation in general workshop and light industrial applications. Reliability of supply and straightforward technical data help planners dimension fixtures with confidence, while the compact form factor supports ergonomic handling on the shop floor. Contact Metav Werkzeuge for tailored advice on integrating Kukamet push‑rod clamps into fixtures; technical support and reliable supply are available from our Emmerich base — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 511-0 GTIN: 8680731508857 Manufacturer: Kukamet Facts Max pressure force: 550 N Max holding force: 700 N Weight: 0.092 kg ECLASS: 21041716 ETIM: EC011973 Special features Material: Zinc‑plated Mounting: horizontal base Pressure spindle: M4x25 Designation: Push‑rod clamp (Schubstangenspanner) SKU: 511-0 FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 700 N, suitable for secure retention in light to medium fixture applications. Which spindle is fitted and can it be replaced? The unit is fitted with an M4x25 pressure spindle; the spindle is a replaceable component and allows fine adjustment of contact pressure. Is the clamp suitable for workshop environments with occasional moisture? Yes, the zinc‑plated finish offers corrosion resistance appropriate for standard workshop conditions and reduces maintenance needs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Pushrod Clamp Horizontal Foot Metal Handle, 700N Holding Force, Zinc Plated - Kukamet
Reliable clamping with a galvanised body and metal handle ensures durable, repeatable performance; the compact design and horizontal foot enable fast integration into assembly jigs. Take advantage of the combination of sturdy construction, clear force ratings and simple mounting for dependable small-part workholding. Order the push-rod clamp directly via Metav Werkzeuge or consult our specialists for application advice. Push-rod clamp 511 — lever clamp with galvanised finish and horizontal foot (Kukamet) The Push-rod clamp 511 is a compact lever clamp designed for secure temporary fixturing in workshop and light industrial assembly applications. Galvanised steel construction for corrosion resistance Metal handle for durable operation Horizontal foot mounting for fixed installation Holding force up to 700 N Durable construction that keeps fixtures reliable The galvanised steel body delivers long-term corrosion protection while the metal handle resists wear under frequent operation, reducing lifecycle costs and downtime. With a rated pressing capacity of 550 N and a measured holding capability beyond that, the design provides a reliable margin for repetitive clamping tasks. This combination of corrosion resistance and mechanical resilience means less maintenance and fewer replacement purchases for routine shop use. Consistent holding and straightforward mounting for repeatable results Engineered for predictable performance, the clamp offers a clear holding force rating of 700 N, making load planning and fixture design straightforward. The horizontal foot mounting allows a low-profile installation on jigs, plates or assembly benches, enabling quick alignment and secure fixation of components. Where process repeatability matters, this clamp contributes to consistent cycle times and reduced rework. Compact format to save space and speed up setups Weighing only 0.087 kg and equipped with an M4x25 pressure spindle, the unit fits into compact fixtures without adding bulk, simplifying layout in constrained work areas. The small footprint and lever action permit rapid engagement and release, improving operator efficiency during batch assembly or test cycles. As a practical workholding element, it supports a smoother workflow and easier integration into existing fixtures. For reliable lever clamping from Kukamet, order the Push-rod clamp 511 via Metav Werkzeuge in Emmerich — for technical guidance or procurement assistance contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 511-0-M SKU: 511-0-M GTIN: 8680731504941 ECLASS: 21041716 ETIM: EC011973 Facts Weight: 0.087 kg Pressing force: 550 N Holding force: 700 N Spindle thread: M4x25 Special features Material: galvanised (zinc-plated) steel Foot type: horizontal foot Handle: metal Category: clamp (lever/rod clamp) FAQ What is the maximum holding force of this clamp? The clamp offers a holding force of up to 700 N; the Push-rod clamp 511 from Kukamet is specified for reliable short-term fixturing at that rating. Which mounting orientation is required for installation? A horizontal foot is provided for fixed mounting; the horizontal foot design supports low-profile installation on plates and jigs. Is the clamp corrosion-resistant for workshop use? Yes, the body is galvanised (zinc-plated), giving the clamp improved resistance to rust in normal workshop environments. What spindle specification does the clamp use? The pressure spindle is M4x25, suitable for fine adjustment within the clamp’s operating range. Can this clamp be used for repetitive production cycles? The robust metal handle and galvanised construction make the clamp well suited to frequent operation and short-cycle production tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Stainless Steel Pushrod Clamp Horizontal Foot M4x25, 700N Hold Force - Kukamet
Take advantage of the combination of stainless steel construction, compact 92 g weight and reliable 700 N holding force for secure, repeatable clamping in confined setups. Order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 511 — horizontal-foot stainless-steel lever clamp by Kukamet The Push-rod clamp 511 is a compact lever clamp designed for horizontal mounting and light-duty production or assembly hold-downs. Stainless steel construction Horizontal foot mounting Holding force up to 700 N Compact 92 g weight Secure clamping where space is limited Compact design and a pronounced holding force make this lever clamp ideal for fixtures with restricted clearance. The combination of a low mass (approximately 0.092 kg) and a maximum holding force of 700 N delivers secure retention without adding bulk to the setup. For applications that require positive location rather than heavy press loads, the device provides consistent repeatability, reducing rework and setup time. Durable materials that withstand shop environments Manufactured from stainless steel, the clamp resists corrosion and wear in demanding workshop conditions, supporting a long service life and predictable performance. The M4x25 spindle enables straightforward fastening and replacement using standard tooling; this simplifies maintenance and minimises machine downtime. The robust construction translates into fewer interruptions and reliable part handling over extended production runs. Fast mounting and clear technical specification for procurement A horizontal foot mounting plate allows quick integration into jigs and fixtures, saving time during assembly and retrofit. The clear specification of 550 N clamping force versus 700 N holding force helps planners choose the correct component: clamping force refers to the adjustable contact pressure, while holding force indicates the maximum retention capacity under load. This distinction supports accurate risk assessment and component matching in fixtures and test rigs. Contact Metav Werkzeuge for tailored advice and ordering of Kukamet push-rod clamp 511 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S511-0 GTIN: 8682843523414 SKU: S511-0 Key figures Weight: 0.092 kg Clamping force: 550 N Holding force: 700 N Spindle: M4x25 Materials & features Material: Stainless steel Mounting: Horizontal foot Product type: Push-rod clamp Special feature: None FAQ What is the primary application for this clamp? The Push-rod clamp 511 is suited for light-duty hold-down and fixture tasks where a compact, horizontal-mounted lever clamp is needed for reliable retention. Can the clamp be used in humid or corrosive environments? Yes, the stainless steel construction of the Kukamet clamp 511 offers improved corrosion resistance compared with standard steel clamps, making it suitable for many workshop environments. How does clamping force differ from holding force on this product? Clamping force (550 N) denotes the contact pressure applied by the spindle, while holding force (700 N) indicates the maximum retention capacity the clamp can resist during operation. Is the spindle replaceable or serviceable? The M4x25 spindle is a standard size and can be replaced or serviced using common workshop tools; this supports simple maintenance procedures for the clamp 511. What mounting options are available? The clamp is supplied with a horizontal foot for secure attachment to fixtures and jigs where a low-profile horizontal mount is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp Horizontal Foot Zinc-Plated, 700N Holding Force - Kukamet
Take advantage of a compact, galvanised vertical clamping solution that combines 700 N holding force with a refined M4×25 pressure spindle for precise setting and consistent workholding. Order directly through Metav Werkzeuge or consult the Metav team for specification advice and reliable supply from Emmerich. 211 Vertical clamp – Vertical clamping device with 700 N holding force (Kukamet) The 211 vertical clamp is a compact, galvanised vertical clamping device designed for secure positioning of small workpieces in jigs and fixtures, offering reliable holding and repeatable adjustment. Compact galvanised construction for corrosion resistance 700 N maximum holding force for secure retention Horizontal foot mounting for stable fixture integration M4×25 pressure spindle for fine clamping adjustment Lightweight at 0.072 kg for minimal fixture load Secure clamping that reduces rework and downtime With a 700 N holding force and a 550 N clamping force, this vertical clamping device delivers reliable retention during light machining, assembly and inspection tasks. The measurable forces translate into predictable performance on the shopfloor, reducing the risk of part movement and associated rejects. The mechanical design emphasises consistent contact pressure, which supports process stability and fewer interruptions during small-batch or repetitive production runs. Durable finish and low fixture load for long service life The galvanised finish provides robust surface protection against corrosion while keeping the component light at 0.072 kg, which helps to avoid unnecessary stress on modular fixtures and movable tooling. The combination of a protective coating and a low mass makes this clamp suitable for environments where longevity and low maintenance are priorities, delivering dependable performance without frequent replacement. Flexible mounting and precise adjustment for accurate set-up Equipped with a horizontal foot for straightforward attachment to base plates and a M4×25 pressure spindle for precise pressure setting, the device integrates easily into existing jigs. The horizontal-foot configuration allows secure anchoring on flat surfaces, while the fine-thread pressure spindle enables incremental adjustment of clamping force, supporting repeatable set-ups and quick changeovers. Practical fit for jigs, fixtures and small-part handling Designed for compact fixtures, the vertical clamping device adapts well to assembly stations and inspection rigs where space is limited but reliable holding is required. Its small footprint and defined clamping forces make it a practical choice for production lines and bench-mounted fixtures that demand consistent, measurable performance rather than large-scale heavy-duty clamping. For dependable small-part clamping with Kukamet quality, contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: 211-0 GTIN: 8680731503913 Article: Vertikalspanner 211 ECLASS: 21041717 ETIM: EC011973 Facts Weight: 0.072 kg Max holding force: 700 N Max clamping force: 550 N Pressure spindle: M4×25 Special features Material / finish: galvanised Mounting: horizontal foot Arm: Not applicable Special features: None FAQ What is the maximum holding force of the 211 vertical clamp? The 211 vertical clamp offers a maximum holding force of 700 N, providing secure retention for small workpieces in fixtures and jigs. How is the device mounted to a fixture? Mounting is via a horizontal foot, allowing stable attachment to flat base plates or fixture rails for straightforward integration. What material and finish does the clamp have? The clamp is galvanised, giving a corrosion-resistant surface suitable for workshop environments where a protective finish is required. Is an arm included with this vertical clamping device? No arm is applicable for this model; the entry for arm is listed as not applicable for the 211 vertical clamp. What adjustment is used to set clamping pressure? Clamping pressure is set with an M4×25 pressure spindle, which permits fine and repeatable adjustment of the contact pressure. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp Wafer Style, Stainless Steel, Horizontal Base - Kukamet
Compact stainless steel construction paired with a 700 N holding force and a 550 N pressing force ensures reliable, space-saving clamping in repetitive production tasks; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 211 by Kukamet — stainless steel, 700 N holding force The Vertical clamp 211 is a compact lever clamp designed for secure workholding in fixtures and jigs, suitable where a horizontal-foot attachment and corrosion-resistant materials are required. Stainless steel construction for corrosion resistance Holding force 700 N for secure clamping Pressing force 550 N for reliable workholding Horizontal foot for stable attachment Secure clamping for repeatable processes The robust 700 N holding force provides a measurable improvement in workpiece retention compared with standard small clamps, reducing slippage during machining or assembly. Designed for repetitive production, the device uses a low-mass form factor (approximately 0.072 kg) to minimise added inertia in moving fixtures while maintaining consistent clamping performance. The combination of high holding capacity and lightweight design supports faster cycle times and predictable process stability, which is particularly beneficial in automated or semi-automated setups. Precise force application with standard pressure spindle A threaded M4x25 pressure spindle enables controlled contact pressure and straightforward adjustment to different workpiece geometries. The spindle specification is industry-standard, allowing simple replacement or retrofitting within existing jigs. By separating the 550 N pressing force from the holding characteristic, the clamp ensures that delicate components are not overloaded while preserving firm retention when required. The technical layout supports maintenance workflows through easy access to the spindle and clamping elements. Durable material selection for harsh environments Constructed from stainless steel, the clamp resists corrosion and surface wear in humid or chemically aggressive environments. This material choice extends service life and reduces the need for frequent replacements, contributing to lower total cost of ownership. Where cleanliness is essential—laboratory jigs or food-industry fixtures—the stainless finish simplifies cleaning and complies with common hygiene expectations for workshop equipment. The absence of additional coatings avoids contamination risks and supports a predictable friction behaviour at the contact points. Flexible mounting and integration into fixtures The horizontal-foot mounting offers a stable base for integration into plates, rails or bespoke fixtures. Its compact footprint makes it suitable for tight clamping arrays and nesting stations where space is at a premium. The clamp’s standard dimensions and attachment type facilitate rapid planning and retrofitting into existing assemblies, improving uptime through minimal redesign effort. For OEMs and tool-room engineers, the clamp represents a pragmatic choice when balancing fixture density with accessible operation. Contact Metav Werkzeuge for detailed specification matching and reliable supply of Kukamet vertical clamps, including the stainless-steel 211 model with 700 N holding force Technical data Article number: S211-0 GTIN: 8682843523254 Brand: Kukamet eClass: 21041717 ETIM: EC011973 Facts Weight: 0.072 kg Holding force (max): 700 N Pressing force (max): 550 N Pressure spindle: M4x25 Materials & features Material: stainless steel Mounting: horizontal foot Special features: none specified Type: vertical lever clamp FAQ What is the maximum holding force of the clamp? The Vertical clamp 211 provides a maximum holding force of 700 N, ensuring secure retention in fixture applications. Which material is the clamp made from? The clamp is manufactured from stainless steel, offering corrosion resistance and easy cleaning for demanding environments. How is the pressure adjusted on the clamp? Adjustment is achieved via an M4x25 pressure spindle, allowing fine control of contact pressure for different workpiece types. Is the clamp suitable for tight fixture arrays? Yes, the compact, low-weight design of the 211 makes it well suited to dense fixture layouts and nesting stations. Who supplies the Kukamet 211 clamp in Europe? Kukamet vertical clamps, including the 211 model, are distributed through Metav Werkzeuge and can be procured or specified via their consultancy. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp With M4x25 Spindle, Metal Handle, Blackened Finish - Kukamet
A compact, economical vertical clamp that combines a 700 N holding force with a 550 N pressing force for reliable light-duty workholding; the blackened finish and metal handle increase longevity while the vertical-foot mounting allows straightforward fixture integration. Order the vertical clamp directly via Metav Werkzeuge or contact their consultants for tailored advice. Vertical clamp 212 by Kukamet — 700 N holding force, metal handle The Vertical clamp 212 is a compact workholding device designed for vertical-foot mounting, providing secure clamping for light-duty fixtures and assembly jigs. 700 N maximum holding force 550 N maximum pressing force Metal handle for durable operation Vertical-foot mounting for secure positioning Secure clamping for repeatable setups The clamp delivers a 700 N maximum holding force together with a 550 N pressing force, which is sufficient for repeatable, low-to-medium load fixtures. These figures translate into less re‑positioning and fewer fixture failures in batch runs, improving process reliability. The clamping action is engineered to be consistent, so set-up times are reduced and cycle stability is increased, supporting a measurable gain in operational efficiency. Compact design for flexible fixture layouts Weighing just 0.08 kg, the unit integrates easily into compact assemblies and tight workspaces. The vertical-foot mounting keeps the footprint minimal while the M4x25 thread spindle provides a standardised connection for clamp spindles or adapters. The light mass of the component minimises load on delicate jigs and allows for convenient retrofitting into existing fixture plates without extensive rework. Built for durability and low maintenance Surface protection is provided by a blackened finish, which resists wear and helps to limit surface corrosion in standard workshop environments. A metal handle ensures robust actuation over repeated cycles and reduces the risk of deformation compared with polymer levers. These design choices lower life‑cycle costs through extended service intervals and predictable replacement cycles. Practical fit for workshop and small-batch production The 212 model is well suited to assembly jigs, test fixtures and small-series machining where compact, dependable clamping is required. Its straightforward mounting and proven mechanical values make it a pragmatic choice for engineering departments and maintenance workshops seeking cost-effective workholding. Certification codes and product classification are provided in the technical section for procurement and inventory control. For reliable small-workholding solutions or to discuss how the 212 clamp fits specific fixtures, contact Metav Werkzeuge for a delivery quote or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B212-0-M GTIN: 8680731507812 Manufacturer: Kukamet Core technical data Maximum holding force: 700 N Maximum pressing force: 550 N Weight: 0.08 kg eClass: 21041717 ETIM: EC011973 Materials & features Blackened finish Metal handle Vertical-foot mounting Thread spindle M4x25 Arm: not applicable FAQ What clamping and pressing forces does this clamp provide? The vertical clamp offers a maximum holding force of 700 N and a maximum pressing force of 550 N, values that are specified for the 212 model by Kukamet. Can the clamp be mounted on standard fixture plates? Yes, the vertical-foot mounting and M4x25 thread spindle allow straightforward attachment to common fixture plates and custom jigs. Is the surface treatment suitable for workshop use? The blackened finish on the clamp provides enhanced resistance to wear and surface corrosion under normal workshop conditions. How heavy is the clamp and does that affect fixture balance? At 0.08 kg the clamp is very light, which minimises its impact on fixture balance and enables use in compact assemblies. What type of handle is used and how durable is it? A metal handle is used for actuation; this increases durability and reduces deformation risk over repeated cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp With Metal Handle, Horizontal Foot, 700N Holding Force, Blackened Finish - Kukamet
Take advantage of a compact, durable clamp that combines high holding force, a metal handle and a horizontal base for straightforward fixture integration; order the 211 vertical toggle clamp directly via Metav Werkzeuge or contact the consultants for application advice. 211 Vertical toggle clamp — vertical toggle clamp with metal handle and horizontal base (Kukamet) A 211 vertical toggle clamp designed for secure workpiece retention in machining and assembly fixtures, offering a compact footprint and reliable mechanical clamping for repetitive production tasks Metal handle for durable operation Horizontal base for flat mounting Holding force up to 700 N Pressure spindle M4 x 25 mm for fine adjustment Consistent clamping performance that supports efficient workflows The compact design delivers repeatable clamping with a maximum holding force of 700 N and a maximum pressing force of 550 N, ensuring secure fixation during milling, drilling or assembly operations. The distinction between holding and pressing force is important: the holding force indicates how much load the clamped workpiece resists, while the pressing force refers to the actual contact pressure applied by the spindle. These values support reliable fixture design and help to calculate safety margins for machining processes, reducing setup time and minimising rework in production. Simple mounting and precise adjustment for fixture integration A horizontal base permits direct mounting to tooling plates or jigs, while the pressure spindle M4 x 25 mm allows fine vertical adjustment to accommodate varying workpiece heights. With a lightweight construction of 0.08 kg, the clamp is easy to position during fixture assembly without compromising stability. The metal handle provides tactile durability for frequent actuation and resists deformation under repeated cycles, which contributes to predictable clamp behaviour in series production. Durable finish and low-maintenance operation for workshop use Finished in a blackened (bruised) coating, the clamp resists surface wear and offers basic protection against corrosion in typical workshop environments. The compact toggle mechanism is engineered for straightforward integration into existing tooling concepts, requiring minimal ongoing maintenance; occasional lubrication of the pivot points preserves smooth action and prolongs service life. As a compact clamping element, the unit supports modular fixture concepts and helps to reduce the number of bespoke components needed for efficient production workflows. For specific application guidance or to request dimensional drawings and lead times, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich Technical data SKU: B211-0-M GTIN: 8680731507607 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Core data Weight: 0.08 kg Holding force (max): 700 N Pressing force (max): 550 N Pressure spindle: M4 x 25 mm Special features Material/finish: blackened Mounting type: horizontal base Handle: metal Category: toggle clamp FAQ What is the difference between holding force and pressing force? Holding force describes the maximum load the clamp will retain without slippage, while pressing force indicates the applied contact pressure; the 211 vertical toggle clamp shows 700 N holding force and 550 N pressing force for safe fixture calculation. Can the clamp be mounted directly to a tooling plate? Yes, the horizontal base design enables direct mounting to tooling plates and jigs for quick fixture assembly. Is the pressure spindle adjustable for different workpiece heights? The clamp uses a pressure spindle M4 x 25 mm that provides fine vertical adjustment to compensate for varying workpiece thicknesses. How resistant is the finish to workshop conditions? The blackened finish offers surface wear resistance and basic corrosion protection suitable for general workshop environments; regular lubrication of pivot points is recommended. Which SKU should be specified when ordering this clamp? Specify SKU B211-0-M and the product description for clear identification when ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
550N Vertical Clamp With Metal Handle, M4x25 Spindle, Stainless Steel - Kukamet
Take advantage of the combination of robust stainless steel construction, compact footprint and reliable holding performance to keep assembly and fixture tasks steady and repeatable; order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Vertikalspanner 212 – stainless steel vertical clamp with metal handle The Vertikalspanner 212 is a compact vertical clamp designed for secure fixture mounting in production and workshop jigs, offering precise pressure adjustment and corrosion-resistant durability. Stainless steel construction Metal handle for secure operation Vertical base for stable mounting Holding force up to 700 N Stable clamping that keeps processes running The vertical clamp delivers a consistent holding force of 700 N and a maximum pressing (clamping) force of 550 N, which translates into dependable part retention during assembly and light machining. Built from stainless steel, the device resists corrosion and wear, so fixtures remain accurate over repeated cycles. The compact, low-mass design minimises added inertia on a jig while the metal handle provides tactile feedback during engagement, reducing the risk of slippage and rework. For plant planners and workshop managers, this means fewer stoppages and a more predictable production flow. Precise pressure control in a small footprint Adjustment is made via an M4x25 pressure spindle, allowing fine tuning of clamping pressure without specialised tools. The spindle mechanism enables controlled contact force, preventing damage to delicate components while maintaining adequate grip on heavier parts. At just 0.08 kg, the clamp is suitable for integration into bespoke fixtures and automated stations where space and weight budgets are limited. The vertical base mounting ensures a secure attachment to stands or plates, improving repeatability compared with ad hoc clamping solutions. Versatile use across assembly and inspection fixtures Designed for workshop and light industrial use, the clamp suits repetitive assembly, holding in inspection jigs and simple fixtures on small production lines. The robust material choice and precise mechanical elements make it appropriate where corrosion resistance and longevity are priorities. Installation is straightforward: the vertical foot provides a stable mounting surface and the compact form factor simplifies retrofitting into existing tooling. For procurement teams seeking to reduce supplier variety without compromising quality, the unit supports standardisation of clamping elements across multiple workstations. Contact Metav Werkzeuge for tailored clamping solutions and request the Kukamet Vertikalspanner 212 (SKU S212-0-M) to integrate high-reliability vertical clamping into workshop fixtures; email info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and next steps Technical data SKU: S212-0-M GTIN: 8680731509175 Article name: Vertikalspanner 212 EClass: 21041717 ETIM: EC011973 Key figures Holding force: 700 N Clamping/pressing force: 550 N Weight: 0.08 kg Pressure spindle: M4x25 Features Material: stainless steel Mounting: vertical base Handle: metal Category: clamps / spanner FAQ What materials is the clamp made from and why does that matter? The clamp is made from stainless steel, which gives the Kukamet Vertikalspanner 212 excellent corrosion resistance and longevity in workshop environments, helping to maintain fixture accuracy over time. How is the clamping force adjusted? Clamping pressure is set via the M4x25 pressure spindle; this allows fine mechanical adjustment so the clamp can secure delicate parts without overloading them. Can the clamp be mounted on standard fixture plates? Yes, the vertical base is designed for stable mounting on plates and stands commonly used in assembly and inspection jigs, making integration into existing tooling straightforward. What loads can the clamp hold during operation? The device provides up to 700 N holding force and a maximum pressing force of 550 N, suitable for many light industrial and assembly tasks where secure retention is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
55mm Toggle Clamp Horizontal Base With Hook, 3.5kN Thrust, 4kN Holding, Zinc Plated - Kukamet
Take advantage of a compact, hook-equipped latch clamp that combines a corrosion-resistant galvanised finish with reliable clamping and holding performance; the result is secure fixture retention and improved cycle reliability. Order directly via Metav Werkzeuge or consult the technical team for installation guidance. Kukamet 411 latch clamp — horizontal-foot toggle clamp with hook and galvanised finish The 411 latch clamp is a lever-operated closure clamp designed for horizontal-foot mounting in workshop jigs and light industrial fixtures. Horizontal-foot mounting for stable installation Galvanised finish for corrosion resistance Hook-equipped design for secure latching Holding force up to 4,000 N Consistent clamping and measurable performance The 411 latch clamp delivers defined mechanical values: a closing force of 3,500 N and a holding force of 4,000 N, which translate into reliable repeatability in production processes. The distinction between the two figures is important: closing force refers to the applied clamp pressure during engagement, while holding force indicates the sustained retention capacity under load. For production planners and fixture designers this means fewer clamp-related stoppages and a measurable improvement in process stability. Robust materials and mounting that suit workshop demands Constructed with a galvanised surface treatment and a horizontal foot for secure attachment, this toggle-style clamp resists common workshop conditions and integrates easily into existing fixture plates. The hook-equipped form gives positive latching without additional parts, and the specified thread length 55 mm allows reliable anchoring into plates or brackets. With a mass of 0.86 kg, the component is light enough for compact jigs while remaining solid under repeated cycles. Practical integration and application benefits The lever mechanism provides fast actuation and repeatable closing for assembly, sheet-metal holding, and simple welding jigs. As a toggle clamp, the design reduces cycle time by enabling quick engagement and rapid release, helping to increase throughput in small-batch manufacturing and repair work. The combination of galvanised finish, clear mechanical figures and a compact footprint supports predictable maintenance intervals and straightforward replacement planning. For procurement or technical consultation on the Kukamet 411 latch clamp, contact Metav Werkzeuge to discuss fixture integration and delivery from Emmerich. Technical Data SKU: 411-4 GTIN: 8680731504187 Category: Spanner / latch clamp eClass: 21041718 ETIM: EC011973 Facts Closing force: 3,500 N Holding force: 4,000 N Weight: 0.86 kg Thread length: 55 mm Special features Galvanised finish Horizontal-foot mounting Hook-equipped Lever-operated toggle clamp FAQ What do the closing and holding force values mean for fixture design? The closing force (3,500 N) indicates the force applied during engagement; the holding force (4,000 N) specifies the clamp’s sustained retention. These figures for the Kukamet 411 latch clamp help in selecting suitable clamps for expected loads. Can the clamp be used in corrosive environments? The galvanised surface treatment of the Kukamet 411 provides increased corrosion resistance suitable for general workshop environments; aggressive or marine conditions require additional protection strategies. Is the clamp suitable for retrofitting into existing jigs? Yes, the horizontal-foot mounting and a thread length of 55 mm enable straightforward integration into plates and brackets commonly used in fixtures when using the Kukamet 411 latch clamp. Which applications are best suited to this type of clamp? Toggle-style closure clamps like the 411 are well suited to assembly, light fabrication, welding jigs and repeated production cycles where quick actuation and repeatable retention are required. What maintenance is recommended to ensure consistent performance? Regular inspection of the galvanised surface and mechanical linkage, lubrication of pivot points and verification of fastener torque will sustain the operation of the Kukamet 411 latch clamp over time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
58mm Vertical Clamp 1,200N Closing Force, 1,400N Holding Force, Zinc Coated Massive Arm - Kukamet
The combination of a galvanised body, a 58 mm arm and up to 1,400 N holding force ensures reliable, repeatable clamping even in compact fixtures; benefit from durable performance and simple integration into existing jigs. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application-specific advice. Vertical clamp 213 — Kukamet vertical clamp with 58 mm arm and galvanised finish A robust Vertical clamp 213 vertical clamp designed for secure clamping in assembly jigs, fixtures and workshop setups. Solid holding arm for increased rigidity Galvanised surface for corrosion resistance Compact 58 mm arm for tight fixture spaces Up to 1,400 N holding force for dependable retention Consistent retention for repetitive production The decisive advantage of this clamping device is its measured retention: a max. holding force of 1,400 N and a clamping force of 1,200 N provide the mechanical reliability required for repeatable operations. In practice, the distinction between clamping and holding force matters: the clamping force is the active force applied during engagement, while the holding force indicates how well the workpiece remains in position under load. These figures translate into fewer process interruptions and lower scrap rates, which improves throughput in small-batch and serial production alike. The data-driven performance supports precise fixturing and predictable results. Durable construction for workshop environments Corrosion resistance and structural integrity reduce downtime and service needs: the main components are galvanised, which slows surface corrosion in humid or oily shop conditions, and the device features a solid holding arm to resist flex under load. The angled foot mounting gives a secure attachment surface for fixtures and plates, spreading forces into the base. For maintenance, the galvanised finish and simple geometry enable straightforward inspection and cleaning, extending service intervals and lowering total cost of ownership compared with untreated alternatives. Space-saving design that integrates easily With a compact 58 mm arm and a lightweight build of 0.242 kg, the clamp is suitable where space is limited and component access must be preserved. The modest envelope allows integration into multi-clamp fixtures, making it easier to increase clamping points without obstructing toolpaths or assembly access. The small footprint also simplifies retrofitting into existing jigs: the angled foot lets the clamp be mounted close to edges or tight corners, maintaining clearance for machining, welding or inspection processes. Practical applications and workshop advantages Engineered for everyday use in assembly, light machining and inspection jigs, this clamp performs reliably in repeatable positioning tasks. Typical applications include fixture retention on welding tables, locating and holding small workpieces for manual assembly, and use as a mechanical stop in measuring setups. The combination of a solid arm, galvanised finish and defined force ratings supports safer operation and faster cycle times, reducing the need for over‑dimensioned clamping solutions while improving ergonomics at the workstation. Technical documentation and PDF catalogue pages are available for integration planning. Contact Metav Werkzeuge for tailored advice on the Kukamet vertical clamp 213 or to request detailed technical drawings and mounting recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 213-2-D-C1 GTIN: 8680731501872 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Numbers / Core technical data Arm length: 58 mm Weight: 0.242 kg Max clamping force: 1,200 N Max holding force: 1,400 N Special features Material: galvanised Mounting: angled foot Massive solid holding arm Category: vertical clamp (spanner) FAQ What is the maximum holding force of this vertical clamp? The clamp delivers a maximum holding force of 1,400 N; the Kukamet Vertical clamp 213 is specified for dependable retention in light- to medium-duty fixtures. Which mounting method is recommended for stable installation? An angled foot mounting is provided for secure attachment; the angled foot allows direct fastening to fixture plates and helps distribute forces into the base. Is the clamp suitable for humid or oily workshop conditions? Yes, the galvanised finish on the Vertical clamp 213 improves corrosion resistance and is suitable for typical workshop environments where surface protection is required. How compact is the clamp for tight fixture layouts? The device features a 58 mm arm and a compact overall envelope; its lightweight 0.242 kg construction facilitates placement in multi-clamp fixtures without obstructing access. Can technical drawings or catalogue sheets be obtained for planning? Technical documentation and a catalogue page are available for the Kukamet vertical clamp 213 (SKU 213-2-D-C1); contact Metav Werkzeuge to receive the PDF data sheet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
58mm Vertical Clamp 1,200N Closing Force, Massive Holding Arm, Angle Base - Kukamet
Take advantage of the combination of a massive holding arm, a compact 58 mm arm length and a 1,400 N maximum holding force for secure, repeatable clamping in production jigs. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 213 by Kukamet – 58 mm arm, 1,400 N holding force Vertical clamp 213 is a compact vertical lever clamp designed for secure workpiece fixation in jigs and fixtures, offering robust force control in limited spaces. Massive holding arm for enhanced rigidity 58 mm arm length for compact fixtures Max holding force 1,400 N for secure clamping Black oxide finish for corrosion resistance Reliable clamping performance for continuous production The clamp delivers defined clamping and pressing values that support stable production cycles: 1,400 N holding force and 1,200 N pressing force ensure workpieces remain fixed during machining and assembly. The distinction between the two figures is practical: the holding force denotes the static retention capacity under lateral loads, while the pressing force indicates the axial load applied during closure. This separation improves process control and reduces the risk of movement-related rejects, enabling more consistent output and less rework. Compact, robust design for versatile fixtures Built around a 58 mm arm and a massive holding arm, the clamp combines a small footprint with high rigidity. The angle foot mounting provides a stable attachment point for jigs and fixture plates, while the black oxide finish offers surface protection against corrosion in everyday workshop conditions. At approximately 0.242 kg, the unit is light enough for compact fixtures but engineered for long service life, making it suitable where space is limited yet clamping reliability must not be compromised. Simple integration into lever and fixture systems The model is ready for straightforward integration into standard clamping arrangements and lever systems, offering a repeatable mechanical interface for manual or semi-automated setups. Identification is simplified by the internal SKU B213-2-D-C1, which supports inventory management and replacement ordering. As a vertical lever clamp, it is particularly useful in production jigs where quick actuation and consistent retention are required, helping to maintain throughput and reduce set-up times. For dependable clamping in compact fixtures, choose the Kukamet vertical clamp 213 and contact Metav Werkzeuge for tailored advice and reliable supply direct from Emmerich. Technical data SKU: B213-2-D-C1 GTIN: 8682843522431 Brand: Kukamet Finish: Black oxide Model name: 213 Core data Arm length: 58 mm Max holding force: 1,400 N Max pressing force: 1,200 N Weight: 0.242 kg eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Angle foot mounting Designed as a vertical lever clamp Compact design for limited-space fixtures Suitable for jig and fixture integration FAQ What is the difference between holding force and pressing force? The holding force indicates the static retention capacity under load, while the pressing force describes the axial force applied when closing the clamp; the Vertical clamp 213 provides both 1,400 N holding and 1,200 N pressing values for clear process control. Can the clamp be mounted on a fixture plate with an angled interface? Yes, the clamp uses an angle foot mounting, which is intended for secure attachment to fixture plates and angled mounting positions in jigs and tooling. Is the clamp suitable for compact fixtures and small jigs? The 58 mm arm and compact design make the unit well suited to small jigs and confined fixture spaces, offering high rigidity without a large footprint. How is the surface treated and what benefit does it bring? The component has a black oxide finish, which improves surface corrosion resistance and reduces reflective glare during handling and inspection. Which identifier should be used for reorders or inventory? Use the SKU B213-2-D-C1 and GTIN 8682843522431 to ensure correct identification of this vertical clamp in procurement and stock systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
58mm Vertical Clamp 1200N Closing Force, Massive Arm With Safety Lock, Zinc-Plated - Kukamet
A compact galvanised vertical clamp with a massive holding arm and safety locking provides secure, repeatable fixturing with 1,400 N holding force and 1,200 N clamping capacity; ideal for jigs and fixtures where consistent pressure and corrosion resistance matter. Order directly via Metav Werkzeuge or consult the specialists for selection support and availability. 213 Vertical clamp — Galvanised vertical clamp with 1,400 N holding force (Kukamet) The 213 Vertical clamp is a galvanised, angle-foot vertical clamping device designed for secure fixturing in jigs and assembly fixtures across workshop and light industrial applications. Galvanised construction for corrosion resistance 58 mm massive holding arm Safety locking mechanism fitted Holding force up to 1,400 N Reliable clamping for high-cycle production The clamp delivers defined holding force and clamping force values—1,400 N and 1,200 N respectively—ensuring consistent retention of workpieces under repetitive loads. This reproducible performance reduces setup variation and supports process stability in machining and assembly operations. By specifying rated forces rather than vague claims, the unit enables planners to calculate fixture loads precisely and match the clamp to the required fixturing task. Built for durable workshop use Constructed with a galvanised finish and a massive holding arm, the device resists corrosion and mechanical wear common in shop-floor environments. The safety lock secures the lever in position once clamping is achieved, preventing accidental release during handling or vibration. The angle foot mounting provides a stable base for attachment to plates or fixtures, while the compact design keeps interference low in tight assemblies—benefits that lengthen service life and reduce maintenance interventions. Compact mounting and straightforward integration With a 58 mm arm and a net weight of 0.24 kg, the clamp is compact enough for confined fixture layouts yet robust enough to deliver significant forces. Its geometry and angle-foot mounting simplify positioning on tooling plates and allow for close-packed arrangements when multiple clamps are required. The combination of modest mass and clear force ratings supports efficient fixture design, lowering cycle-time losses linked to manual re-tensioning and enabling predictable clamping behaviour in production sequences. Choose Kukamet's 213 Vertical clamp for dependable fixturing and contact Metav Werkzeuge in Emmerich for availability and specification advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 213-2-D-L-C1 GTIN: 8680731501902 ECLASS: 21041717 ETIM: EC011973 Brand: Kukamet Core figures Holding force: 1,400 N Clamping force (max): 1,200 N Arm: 58 mm Weight: 0.24 kg Design & features Material: Galvanised Mounting: Angle foot Massive holding arm Safety locking mechanism SKU: 213-2-D-L-C1 FAQ What forces does the clamp provide? The clamp offers a holding force of 1,400 N and a maximum clamping force of 1,200 N, specified for consistent fixturing performance with the Kukamet 213 Vertical clamp. How is the unit mounted to a fixture? Mounting is by an angle foot, allowing secure attachment to tooling plates or fixture bases and straightforward integration into existing jig layouts. Is the clamp suitable for workshop environments? Yes. The galvanised finish and robust holding arm are intended for shop-floor use, giving corrosion resistance and mechanical durability for repeated cycles. What are the main dimensions and weight? The holding arm measures 58 mm and the device has a net weight of 0.24 kg, making it compact for tight fixture arrangements. Does the clamp include a locking feature? A safety locking mechanism is fitted to secure the lever in the clamped position and prevent unintended release. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
58mm Vertical Clamp 1200N Thrust, Massive Holding Arm With Safety Lock - Kukamet
Take advantage of reliable workshop clamping with a massive holding arm and an integrated safety lock, providing steady retention and safe operation in fixture work. Order the vertical clamp directly via Metav Werkzeuge or consult the team for integration advice. Vertikalspanner 213 – Vertical clamp with 1,200 N clamping force and safety lock by Kukamet The Vertikalspanner 213 is a vertical clamping device for fixture and assembly applications, combining a compact form with a robust holding arm and angle-foot mounting for secure attachment. Massive holding arm for stable clamping Safety locking mechanism prevents release 1,200 N clamping force, 1,400 N hold Angle-foot mounting for secure installation Reliable force where precision matters The Vertikalspanner 213 delivers a defined clamping force of 1,200 N and a holding force of 1,400 N, values that ensure secure immobilisation of components in repetitive assembly and machining fixtures. The forces are specified to give planners a comparable baseline when designing jigs or selecting complementary clamps. The integrated safety lock reduces the risk of accidental release during handling, so workpieces remain fixed once clamped; this translates directly into fewer process interruptions and improved throughput. Compact footprint with secure attachment options A short 58 mm arm minimises overhang while keeping contact pressure directed where needed, enabling dense fixture layouts without excessive interference. The angle foot mounting permits simple bolting to plates or subframes and is suited to modular fixturing concepts. At just 0.24 kg, the unit is lightweight enough to be mounted on adjustable fixtures or transport fixtures without noticeably increasing moving mass, yet substantial features such as the massive holding arm preserve rigidity where it counts. Workshop-ready finish and low-maintenance operation The component is supplied with a blackened finish, chosen for wear resistance and reduced glare on the shop floor. Construction emphasises straightforward function: lever action is supported by a solid arm and a positive safety catch that locks the lever in position. Routine maintenance is limited to occasional cleaning and inspection of the locking surfaces; this straightforward upkeep supports a consistent service life and reliable clamping performance in busy production environments. Secure workshop clamping with Kukamet precision — contact Metav Werkzeuge in Emmerich for tailored advice and fast supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: B213-2-D-L-C1 Model designation: Vertikalspanner 213 Manufacturer: Kukamet Facts Clamping force: 1,200 N Holding force: 1,400 N Arm length: 58 mm Weight: 0.24 kg eClass: 21041717 ETIM: EC011973 Special features Mounting: angle foot Finish: blackened Massive holding arm Safety lock Material: blackened finish SKU: B213-2-D-L-C1 FAQ What is the maximum clamping force of this vertical clamp? The vertical clamp provides a maximum clamping force of 1,200 N and a holding force of 1,400 N for secure fixation with the Vertikalspanner 213. How is the clamp mounted to a fixture plate? Mounting is via an angle foot, which allows bolting to plates or subframes; the design supports modular fixture layouts and stable attachment. Is the locking mechanism suitable for repeated automated use? The safety lock and the massive holding arm were designed for frequent operation and reduce the risk of unintended release during repetitive processes. What material finish does the clamp have and why? The clamp is supplied with a blackened finish, chosen for wear resistance and practical longevity in workshop environments. Can the clamp be used in compact fixture layouts? Yes, the short 58 mm arm and compact design make the unit suitable for dense fixturing where space is limited. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5 000 N Three-Point Vertical Clamp, Horizontal Foot, M12x80 Actuator, Blackened Finish - Kukamet
The compact vertical clamp delivers dependable clamping with a high holding force of 5,000 N and a maximum pressure of 4,500 N while remaining lightweight and easy to mount; order directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 211 (B211-5) by Kukamet — Horizontal foot, 5,000 N holding force The Vertical clamp 211 is a compact clamping device for secure workpiece fixation in machining and fixturing applications, offering stable horizontal-foot mounting for bench and fixture integration. Holding force up to 5,000 N Maximum pressure 4,500 N Horizontal foot for stable mounting Blackened finish for corrosion resistance Stable clamping that boosts process reliability The vertical clamping unit combines a high holding force and modest mass to secure components during machining operations. With a specified holding force of 5,000 N and a maximum pressure of 4,500 N, the device affords consistent fixation under load, reducing rework and stoppages. The M12 x 80 spindle provides precise actuation and repeatable contact, while the compact 1.54 kg body keeps fixture weight low. These characteristics translate into predictable process stability and shorter setup times for repetitive production runs. Space-saving mounting and robust surface treatment Designed for integration into workshop fixtures, the clamp features a horizontal foot for flat, space-efficient attachment and offers straightforward alignment with modular tooling plates. The blackened finish protects against surface corrosion and reduces glare in a busy machine environment. The compact footprint and standard spindle interface enable quick retrofitting into existing jigs, supporting flexible utilisation across milling, drilling and light assembly tasks without extensive retooling. Proven supply chain and service assurance for industry use Built for everyday shop-floor use, the clamp is manufactured to deliver durable performance and simple handling. The construction and finish emphasise longevity, while the proven mechanical specification supports consistent clamp cycles. As a distribution partner, Metav acts as a quality filter for the European market, providing centralised availability and reliable order processing from Emmerich. This combination of robust hardware and dependable supply reduces procurement complexity and supports uninterrupted workshop operations. Choose the Kukamet vertical clamp 211 for compact, high‑force clamping and contact Metav Werkzeuge in Emmerich for tailored technical advice via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: B211-5 GTIN: 8680731503845 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Facts Holding force (max): 5,000 N Maximum pressure: 4,500 N Weight: 1.54 kg Spindle: M12x80 Special features Mounting: horizontal foot Surface: blackened finish Arm: not applicable Special feature: none Category: Spanner FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 5,000 N, allowing secure fixation for a wide range of light to medium machining tasks. Which mounting method is used for fixing the clamp? The device uses a horizontal foot for stable attachment to fixture plates or bench mounts, simplifying alignment in compact set-ups. What spindle specification does the clamp use? Actuation is achieved via an M12 x 80 spindle, giving reproducible travel and compatibility with standard fixture drives. Is the surface treated for corrosion resistance? Yes, the clamp features a blackened finish, which offers enhanced surface protection suitable for workshop environments. Can this clamp be integrated into existing jigs and fixtures? The compact footprint and standard spindle interface allow straightforward integration of the clamp into existing jigs and fixture systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5 000 N Vertical Clamp With Safety Lock, M12x80 Spindle, 4 500 N Clamp Force, Blackened - Kukamet
Combining a robust 4,500 N clamping capacity with a positive safety lock and compact 1.54 kg construction, this vertical clamp delivers secure, repeatable fixturing for production and jigs. Order the vertical clamp directly via Metav Werkzeuge or consult the Metav specialists for fixture integration and stock availability. Vertikalspanner 212 – vertical clamp with 4,500 N clamping force and safety lock (Kukamet) The Vertikalspanner 212 is a vertical toggle clamp engineered for secure holding in jigs, fixtures and light industrial tooling applications. Safety lock for secure clamping 4,500 N clamping capacity 5,000 N holding capability Vertical foot mounting, blackened finish Consistent clamping power that stabilises production The device offers a clamping force of 4,500 N and a holding force of 5,000 N, delivering repeatable grip strength for batch work and short runs. The integrated M12x80 pressure spindle enables fine adjustment of contact pressure, so tolerances can be compensated without additional shims. For machining, assembly or inspection fixtures, the combination of rated forces and adjustability supports stable parts handling and reduces rework caused by shifting workpieces. Built for safety and compact workshop layouts A positive safety lock prevents accidental release once the clamp is engaged, increasing operator confidence and process reliability. The vertical foot mounting minimises the clamp’s footprint when integrated into platen or base plates, while the blackened burnished finish provides a uniform surface that resists visual wear in daily use. At 1.54 kg, the unit is lightweight enough for rapid fixture changes yet substantial enough to withstand frequent operation and lever actuation. Faster setup and reliable fixture integration As a compact toggle clamp, the model streamlines fixture assembly and reduces cycle time by providing quick mechanical engagement and repeatable positioning. The clamp’s construction suits production jigs, inspection benches and modular tooling systems where fast clamping and secure locking are essential. Delivered by Kukamet, the component is compatible with standard jig-making workflows and aids efficient shop-floor processes without complex adjustments. For tailored advice on integrating the vertical clamp into existing tooling or to reserve units from Metav Werkzeuge’s Emmerich distribution centre, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com — specialists will advise on suitability and availability. Technical Data Article number: B212-5-L GTIN: 8680731507935 Manufacturer: Kukamet Category: Spanner eClass: 21041717 ETIM: EC011973 Core technical data Weight: 1.54 kg Clamping force (max): 4,500 N Holding force (max): 5,000 N Pressure spindle: M12x80 Special features Safety locking (positive lock) Vertical foot mounting Material / finish: blackened burnished finish Design: vertical toggle clamp Story trigger: lever clamp FAQ What maximum clamping force does the Vertikalspanner 212 provide? The Vertikalspanner 212 provides a clamping capacity of 4,500 N (Kukamet vertical clamp, SKU B212-5-L). Is a safety lock fitted to the vertical clamp? Yes, the vertical clamp features a safety lock to prevent unintended release; this is standard on the Kukamet Vertikalspanner 212 (B212-5-L). How is the clamp mounted in a fixture? The unit uses vertical foot mounting, designed for plate or base-plate installation in jigs and fixtures; the product referenced is the Vertikalspanner 212 (Kukamet, B212-5-L). What is the finish and weight of the clamp? The clamp is supplied in a blackened burnished finish and weighs 1.54 kg (Vertikalspanner 212, Kukamet, SKU B212-5-L). Which applications suit this toggle clamp best? The clamp is suited to jigs, assembly fixtures and inspection benches where fast engagement and secure locking are required; see the Kukamet Vertikalspanner 212 (B212-5-L) for a compact, repeatable solution. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
6000N Hold Force Vertical Clamp 2000N Thrust, 120° Angle, Horizontal Base, Blackened Finish - Kukamet
Take advantage of a compact, high-capacity clamping solution that combines a 6000 N holding arm with a 2000 N maximum clamping force for reliable, repeatable fixturing; order directly via Metav Werkzeuge or contact our consultants for specification advice. 222 Vertical clamp — Kukamet, 6000 N holding arm, horizontal foot The 222 vertical clamp is a compact lever-operated clamping device for industrial and workshop fixtures, designed to deliver high holding power and stable mounting in small set-ups. 6000 N holding arm for secure clamping Up to 2000 N clamping force Horizontal-foot mounting for stable set-up Blackened finish for corrosion resistance Reliable heavy-duty hold with compact footprint The 222 vertical clamp combines a high holding force of 6000 N with a compact design that keeps workpieces secure without occupying excessive bench or fixture space. The distinction between holding force and clamping force is critical: the holding arm resists displacement under load (6000 N) while the clamping mechanism applies the operative squeeze (2000 N) that fixes the part in position. The compact mass of 2.14 kg and the horizontal-foot mounting enable a low-profile installation on jigs or subplates, supporting stable processes where repeatability and machine access are important. Components are finished for durability, reducing the frequency of replacement and preserving tool-room uptime. Faster set-up and consistent cycle performance Designed as a lever clamp, the unit accelerates cycle time through quick actuation and straightforward integration into existing fixtures. The 120° angle of operation provides ergonomic clearance for insertion and removal of parts while maintaining a secure load path during operation. This geometry means fewer collisions and less risk of interference with adjacent tooling, contributing to fewer stoppages and consistent part placement over repeated cycles. For production environments that value throughput and predictable results, the clamp’s mechanical simplicity translates into lower set-up times and less reliance on frequent adjustments. Built for workshop environments and robust applications Constructed with a blackened finish, the clamp resists corrosion and surface wear in mixed workshop conditions, supporting long service life and dependable performance. The unit’s features — including the sturdy holding arm and horizontal-foot attachment — make it suitable for metalworking jigs, assembly fixtures and general workshop tooling where mechanical reliability is paramount. Supplied by Kukamet and distributed through Metav Werkzeuge, the device benefits from a streamlined supply chain and quality inspection at Emmerich, helping to ensure that each item meets industrial expectations for consistency and usability. For secure vertical clamping with a proven 6000 N holding arm, contact Metav Werkzeuge to discuss integration options or specification matching — Metav Werkzeuge is ready to advise from Emmerich, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 222-6-C GTIN: 8682843520512 ECLASS: 21041717 ETIM: EC011973 Facts Weight: 2.14 kg Holding force: 6000 N Clamping force (max): 2000 N Angle: 120° Special features Horizontal-foot mounting Holding arm with 6000 N holding force Blackened finish Category: Spanner FAQ What is the practical difference between holding force and clamping force? Holding force refers to the arm’s resistance to displacement under load, while clamping force is the actual squeeze applied; the 222 specifies a 6000 N holding arm and a maximum clamping force of 2000 N to combine secure restraint with effective fixation. Can the clamp be mounted on compact jigs and subplates? Yes, the horizontal-foot mounting and compact mass make the clamp suitable for low-profile installations on jigs, subplates and assembly fixtures where space is limited. Is the finish suitable for mixed workshop environments? The blackened finish offers surface protection against corrosion and wear, supporting reliable performance in typical workshop and industrial settings. Which applications benefit most from this vertical clamp? The clamp is ideal for metalworking fixtures, assembly jigs and production tooling that require repeatable positioning, quick actuation and robust holding characteristics. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
60mm Vertical Clamp With Angle Base Size 2, Max Hold 1200 N - AMF
Take advantage of the compact size, reliable holding force and straightforward mounting options to maintain stable workholding in fixtures and jigs. Order directly via Metav Werkzeuge or request a detailed quote for integration into production workflows. Senkrechtspanner Nr.6803 Gr.2 Winkelfuß AMF – Vertical clamp, angled foot, size 2, robust holding The Senkrechtspanner Nr.6803 Gr.2 Winkelfuß AMF is a vertical clamping element designed for secure, repeatable workholding in jigs, fixtures and machine set-ups where space and stability are critical Vertical clamp, size 2 with angled foot Holding force 1,200 N Maximum pressing force 1,000 N Pressure screw M6 x 35 Consistent clamping performance for reliable production The vertical clamping element delivers stable holding force under intermittent loads, with a specified holding force of 1,200 N and a maximum pressing force of 1,000 N, ensuring components remain immobile during machining or inspection. These figures describe the mechanical capacity and help assess cycle reliability: the holding value designates the sustained grip, while the pressing force indicates the maximum actuation load the unit can tolerate. For production planners, this translates into predictable fixture behaviour, reduced rework and fewer stoppages owing to part movement. Compact angled foot for flexible fixture design The integrated angled foot provides a low-profile mount that simplifies positioning in confined jigs and on modular tooling plates. Key dimensions support straightforward planning: H1 167 mm overall height reference, L1 77 mm base length and aileron-related measures for accurate siting. The supplied pressure screw M6 x 35 enables secure actuation without additional custom fasteners. These physical details assist in CAD integration and reduce trial‑and‑error during assembly, allowing the clamping element to be incorporated into space-constrained set-ups while maintaining ergonomic access for actuation and inspection. Practical compatibility and application contexts Designed as a general-purpose vertical clamp for clamping technology applications, the unit suits short-run and serial production tasks where repeatability and compactness matter. The size designation indicates a medium-small profile appropriate for small fixtures, component testing rigs and manual assembly stations. Where higher clamping forces are unnecessary, the clamp provides an efficient balance between grip and footprint, supporting quicker changeovers and simpler fixture layouts. Material-specific recommendations cannot be inferred from the data provided; selection should be confirmed against the component material and cutting or handling forces expected in the process. Request a tailored quotation or technical datasheet from Metav Werkzeuge for integration planning and spare-part matching; Metav Werkzeuge can advise on fixture compatibility and delivery from stock in Emmerich. Technical Data Article number: 4123590120NW Product type: 6803 Label: Senkrechtspanner Nr.6803 Gr.2 Winkelfuß AMF Manufacturer: AMF Facts Size: 2 Maximum pressing force: 1,000 N Holding force: 1,200 N Pressure screw: M6 x 35 H1: 167 mm L1: 77 mm Special features With angled foot a [°]: 105 Packaging unit: 1 A [mm]: 6 B [mm]: 41 C [mm]: 20 D [mm]: 6.1 E [mm]: 25 F [mm]: 6 H [mm]: 60 I [mm]: 12 K [mm]: 6 M [mm]: 25.5 N [mm]: 37 O [mm]: 5 P [mm]: 32 FAQ What is the primary application for this vertical clamp? The vertical clamp is intended for secure workholding in jigs, fixtures and machine set-ups where a compact size 2 clamp with an angled foot provides space‑efficient mounting and reliable part retention. Which forces should be considered when specifying the clamp for a fixture? Consider the holding force of 1,200 N and the maximum pressing force of 1,000 N as the key mechanical parameters when designing fixtures with this AMF vertical clamp (SKU 4123590120NW). Is the pressure screw included and what are its specifications? The unit is supplied with a pressure screw M6 x 35, which enables direct installation and actuation without additional fasteners for many standard fixtures. Can this clamp be integrated into existing modular tooling plates? Yes, the angled foot and the compact footprint make the clamp suitable for integration into modular plates; plan using the provided dimensional values such as H1 167 mm and L1 77 mm for precise CAD placement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
61mm Vertical Clamp 2000N Clamping Force, Massive Arm with Safety Lock - Kukamet
Robust clamping performance with a massive holding arm and safety lock, combined with a compact 61 mm arm and angle-base mounting, ensures secure, space-saving operation; order via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp »213« – 2,500 N holding force, angle base (Kukamet) A Vertical toggle clamp »213« engineered for secure vertical clamping in jigs, fixtures and assembly stations, offering a compact footprint and trustworthy locking for repeatable production processes Robust holding arm with safety lock Up to 2,500 N holding force Compact 61 mm arm for tight spaces Angle base for flexible mounting Consistent clamping forces for reliable production The clamp delivers measurable holding and pressing forces, with a maximum holding force of 2,500 N and a maximum pressing force of 2,000 N, which supports reproducible workholding in short-cycle production. Specified forces enable straightforward planning of fixtures and allow engineers to calculate safety margins for repeatable operations. The design translates force figures into practical outcomes: parts remain stationary during machining, welding or assembly, reducing rework and improving throughput. Space-saving mounting with a durable finish Designed for compact fixtures, the clamp’s 61 mm arm length and angle base make it simple to integrate where space is limited. The component’s blackened finish combines corrosion resistance with a subdued aesthetic suited to workshop environments. At 0.43 kg, the device is light enough for manual jigs yet robust in behaviour due to its massive holding arm, providing a balance between manoeuvrability and operational stability for toolrooms and production lines alike. Safer handling and straightforward integration The clamp incorporates a safety lock that prevents accidental release under load, supporting safer processes and helping to meet in-house safety practices. The lever-style mechanism offers fast actuation for increased cycle speed while the robust construction reduces the need for frequent maintenance. Integration into fixtures is simplified by the angle-base mounting, allowing flexible positioning and predictable clamping geometry for both prototype setups and serial production. Contact Metav Werkzeuge for application-specific guidance or to secure stock of the Kukamet Vertical toggle clamp »213« from our Emmerich warehouse Technical data Article number: B213-3-D-L-C1 Manufacturer: Kukamet Mounting: Angle base Material finish: blackened finish Weight: 0.43 kg Core technical data Maximum pressing force: 2,000 N Maximum holding force: 2,500 N Arm length: 61 mm Special features Massive holding arm Safety lock Angle base (mounting foot) Compact lever clamp design SKU: B213-3-D-L-C1 FAQ What is the maximum holding force of this clamp? The Kukamet Vertical toggle clamp »213« provides a maximum holding force of 2,500 N, as specified for secure workholding in fixtures. How is the clamp mounted in a jig or fixture? Mounting is carried out via the angle base, which allows flexible positioning of the clamp on plates or frames and simplifies integration into existing tooling layouts. Is the clamp suitable for high-cycle manual use? Yes, the lever-style action and massive holding arm make the clamp suitable for high-cycle manual operations where fast actuation and reliable locking are required. What finish does the clamp have and why does it matter? The component has a blackened finish, offering improved surface corrosion resistance and a durable appearance suited to workshop conditions. What is the arm length and how does it affect application planning? The arm length is 61 mm, a compact dimension that supports workholding in confined spaces while defining the clamping reach for fixture design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
61mm Vertical Clamp 2000N Closing Force, Zinc Plated Massive Arm With Safety Lock - Kukamet
Robust zinc-plated construction, a massive holding arm and a compact 61 mm reach ensure stable fixtures and repeatable clamping with a holding force of 2,500 N. Benefit from reliable performance and easy integration into jigs and benches — order via Metav Werkzeuge or consult our specialists for technical advice. Kukamet 213 Vertical Clamp — vertical lever clamp with safety latch and zinc-plated finish The 213 Vertical Clamp is a zinc-plated vertical lever clamp engineered for workshop and light industrial fixturing, offering high holding force and secure mounting via an angle base for dependable repeatability. Zinc-plated steel construction Massive holding arm with safety latch Holding force 2,500 N Right-angle mounting foot Secure clamping for repeatable fixturing The lever-style vertical clamp delivers consistent clamping action and measurable force, making it suitable where process reliability matters. With a holding force of 2,500 N and a clamping force of 2,000 N, the device secures workpieces during milling, drilling and assembly operations, reducing part movement and rework. The mechanical locking element provides a clear engaged state, which supports reproducible setups and shorter cycle times. For users less familiar with industrial terminology, holding force refers to the maximum resistance against undesired movement once the clamp is engaged. Designed for robust workshop mounting A zinc-plated finish protects the clamp against corrosion in demanding workshop environments while keeping maintenance straightforward. The clamp mounts on a right-angle base, allowing attachment to fixtures, plates or machine tables where vertical clamping is required. The massive holding arm offers improved stability under side loads compared with slimmer designs; this increases resistance to bending and improves alignment over repeated cycles. Angle-base mounting simplifies integration into existing jigs and reduces the need for bespoke adapters. Compact footprint with high performance Weighing just 0.43 kg and featuring a 61 mm arm, the clamp combines a small footprint with industrial-strength performance, enabling use in confined assemblies and modular fixturing systems. Its compact dimensions ease placement close to the machining zone, shortening clamp-to-cut distances and offering better access for tooling. The lever mechanism is efficient in space usage and provides fast actuation, which helps to maintain throughput without compromising clamp capacity. Safe operation and straightforward upkeep Safety features include a dedicated safety latch that prevents accidental release when the clamp is under load, supporting safer handling in repetitive operations. Routine maintenance is limited to periodic lubrication of the pivot points and a visual check of the latch and fastenings; the zinc plating reduces the frequency of protective treatments. Built as a mechanical device with few wear parts, the clamp offers predictable life expectancy when used within the specified force ratings, supporting consistent production quality. Choose the Kukamet 213 for dependable vertical clamping and contact Metav Werkzeuge for specification matching and procurement — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific fixtures Technical Data SKU: 213-3-D-L-C1 GTIN: 8680731501988 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 61 mm Holding force max: 2,500 N Clamping force max: 2,000 N Weight: 0.43 kg Special features Material: zinc-plated Mounting: angle base (right-angle foot) Massive holding arm and safety latch Category: clamp FAQ What materials is this clamp suitable for? The 213 vertical clamp is a mechanical clamping device designed for fixture work on metals and general workshop materials; the spec sheet lists its construction as zinc-plated steel, which is compatible with common machining and assembly tasks. How does the safety latch work on the 213 Vertical Clamp? The safety latch secures the lever in the engaged position to prevent unintended release under load; on the 213 model the latch is integrated with the massive holding arm to maintain engagement during vibration or side loads. Can the clamp be mounted to custom fixtures? Yes, the angle base allows secure attachment to plates and fixtures; the right-angle mounting foot is intended for simple integration into jigs and modular fixturing systems. Is the clamp suitable for repetitive automated use? The lever mechanism and robust arm of this vertical clamp support repeatable manual and semi-automated operations when used within the specified holding and clamping forces. What maintenance does the 213 require to retain performance? Basic upkeep includes periodic lubrication of pivot points, inspection of the safety latch and fasteners, and cleaning to remove chips and coolant; the zinc-plated finish reduces corrosion-related maintenance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com