Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
7000 N Closure Clamp Vertical Foot With Hook, Zinc Plated, 95mm Thread Length - Kukamet
Reliable fixture locking with a galvanised body, strong holding force and adjustable spindle—ideal for jigs and transport fittings. Benefit from robust retention (8,000 N) and a compact vertical-foot design for easy mounting; order the clamp directly via Metav Werkzeuge or consult their specialists for application advice. 332 Toggle Latch Clamp — Vertical-foot mounting, galvanised, 8 kN holding force (Kukamet) 332 toggle latch clamp provides compact, repeatable locking for industrial fixtures and closures, combining durable coating and high retention in a small footprint Galvanised finish for corrosion resistance Vertical-foot mounting for secure installation 8,000 N holding force for strong retention Hook-equipped for positive engagement Reliable high-force locking that protects production quality The 8,000 N rated holding capacity, paired with a maximum clamping pressure of 7,000 N, delivers secure retention for parts during machining, transport and assembly. This level of force reduces the risk of component movement and consequential rework, supporting consistent process quality. The mechanism’s lever-style action ensures rapid engagement and disengagement, keeping cycle times low while maintaining safety margins in demanding workshop environments. Built to last in workshop and on the shop floor Constructed from galvanised material, the latch resists surface corrosion and retains functional reliability in humid or variable conditions. With a compact mass of 0.72 kg, the unit is easy to integrate into fixtures without overloading movable assemblies. The durable finish and robust components mean less frequent replacement and steady performance in repetitive industrial use, contributing to lower downtime and predictable maintenance planning. Flexible mounting and adjustment for many applications Designed for vertical-foot mounting, the clamp fastens neatly to plates and frames, enabling stable alignment on jigs and transport boxes. The adjustable spindle with a 95 mm thread length allows fine tuning of closing position and engagement depth, while the integral hook secures positive closure under vibration. This combination of mounting convenience and adjustability makes the device suitable for clamping, closure and securing tasks across assembly lines and tooling fixtures. Clear technical benefits for engineers and buyers The lever-based closure mechanism provides a compact alternative to larger clamping systems, saving space on fixtures without sacrificing retention strength. The galvanised surface reduces corrosion-related failure modes, extending service life and cutting lifecycle costs. As a simple mechanical solution with measurable force ratings, this toggle latch clamp offers predictable behaviour for process validation and fixture design. Contact Metav Werkzeuge for application guidance and to arrange supply of the Kukamet 332 toggle latch clamp; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid delivery from Emmerich Technical Data Article number: 332-4 GTIN: 8682843523728 Manufacturer: Kukamet Facts Weight: 0.72 kg Holding force: 8,000 N Maximum clamping pressure: 7,000 N Thread length: 95 mm eClass: 21041718 ETIM: EC011973 Special features Galvanised material Vertical-foot mounting Hook included Lever-style toggle clamp Category: Clamps (Spanner) FAQ What is the maximum holding capacity of this latch? The Kukamet 332 toggle latch clamp provides a holding force of 8,000 N and a maximum clamping pressure of 7,000 N, suitable for robust part retention in fixtures and transport applications. Is the clamp suitable for outdoor or humid environments? Yes, the galvanised finish on the 332 offers improved resistance to corrosion, making it well suited to humid workshop conditions and environments where surface protection is required. How is the latch mounted to a fixture? The unit uses a vertical-foot mounting arrangement, allowing secure attachment to plates and frames; the adjustable spindle (95 mm thread length) permits precise closing position adjustment. Does the product include a hook for positive engagement? Yes, the model is supplied with a hook included, providing positive engagement and secure closure under vibration or dynamic load. What are typical uses for this type of clamp? Common applications include jigs and fixtures, transport and shipping closures, assembly line holding, and any situation requiring repeatable, high-force mechanical locking. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Druckkraft, waagerechter Fuß, Gewindelänge 95 mm, mit Haken, Verzinkt, 0,815 kg - Kukamet
Kombinieren Sie die Verzinkung und die hohe Haltekraft für sichere Spannlösungen in Werkstatt und Industrie; profitieren Sie von der robusten Bauweise und sichern Sie das Produkt direkt über Metav oder sprechen Sie unsere Beratung an. Verschlussspanner (Hebelspanner) von Kukamet Der Verschlussspanner von Kukamet ist ein verzinkter Hebelspanner für belastbare Spann- und Halteaufgaben in Werkstatt und Produktion. Robuste Verzinkung schützt vor Korrosion Waagerechter Fuß für stabile Montage Druckkraft 7.000 N für sichere Fixierung Haltekraft 8.000 N für dauerhaften Halt Mit Haken und Gewindelänge 95 mm Langlebige Konstruktion für rauen Werkstatteinsatz Die verzinkte Oberfläche sorgt für Korrosionsschutz und verlängert die Lebensdauer der Spannvorrichtung auch unter anspruchsvollen Bedingungen. Durch die Kombination aus robustem Material und kompakter Bauform entsteht eine langlebige Lösung, die weniger Austausch und Wartung erfordert. Das Ergebnis ist weniger Stillstandzeit und höhere Verfügbarkeit von Spannmitteln in der Werkstatt. Kraft und Sicherheit bei Spann- und Halteaufgaben Mit einer maximalen Druckkraft von 7.000 N und einer Haltekraft von 8.000 N bietet die Vorrichtung ausreichende Reserven für viele Montage- und Prüfaufgaben. Die Unterscheidung zwischen aufgebrachter Kraft (Druckkraft) und tatsächlicher Halteleistung (Haltekraft) hilft bei der richtigen Auswahl: Für Schweißspanner, Montagevorrichtungen und Prüfvorrichtungen ist diese Dimensionierung besonders geeignet. Einfache Montage und flexible Befestigungsmöglichkeiten Der waagerechter Fuß erlaubt eine stabile Befestigung auf ebenen Flächen, während der integrierte Haken flexible Spanngeometrien ermöglicht. Die Gewindelänge 95 mm sorgt für variablen Einbau, das geringe Gewicht erleichtert Handhabung und Positionierung. Damit lässt sich die Spannlösung schnell an unterschiedliche Werkstücke und Aufbauten anpassen. Zielgruppe und empfohlene Einsatzfelder Entwickelt für Schlosser, Werkstätten und industrielle Anwender, eignet sich das Produkt als zuverlässiger Hebelspanner für Vorrichtungsbau, Serienmontage und mobile Spannaufgaben. Anwender mit Bedarf an robuster Mechanik profitieren von der einfachen Integration in vorhandene Spannsysteme und der klaren Leistungskennzeichnung. Kukamet Hebelspanner mit verzinkter Oberfläche und 8.000 N Haltekraft jetzt über Metav sichern — bei technischen Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 351-4 Bezeichnung: Verschlussspanner 351 Marke: Kukamet Daten Druckkraft max: 7000 N Haltekraft max: 8000 N Gewindelänge: 95 mm Gewicht: 0.815 kg Besonderheiten Material: Verzinkt Mit Haken Befestigungsart: waagerechter Fuß Besonderheit: Keine ECLASS: 21041718 (Produktklassifikation) ETIM: EC011973 (Technische Klassifikation) FAQ Welche Kraftwerte sind beim Verschlussspanner relevant? Der Kukamet Verschlussspanner 351 liefert eine maximale Druckkraft von 7.000 N und eine Haltekraft von 8.000 N; diese Werte geben Auskunft über die Spannleistung und die zu erwartende Haltekraft im Betrieb. Ist der Verschlussspanner für den Außeneinsatz geeignet? Die verzinkte Oberfläche des Kukamet Hebelspanners bietet Schutz vor Korrosion, sodass der Verschlussspanner auch in feuchteren Umgebungen länger funktional bleibt, allerdings sollte regelmäßige Kontrolle erfolgen. Wie wird der Spannarm befestigt? Die Befestigung erfolgt über den waagerechten Fuß; die Konstruktion ermöglicht eine stabile Montage auf ebenen Flächen und einfache Integration in Vorrichtungen. Enthält das Produkt einen Haken zur Aufnahme von Werkstücken? Ja, der Kukamet Verschlussspanner ist mit einem Haken ausgestattet, der flexible Spannvarianten und einfache Fixierung unterschiedlicher Werkstückgeometrien ermöglicht. Welche Gewindelänge hat der Verschlussspanner und warum ist das wichtig? Die Gewindelänge beträgt 95 mm; diese Länge erlaubt variable Einbautiefen und Anpassung an verschiedene Aufbausituationen, was die Einsatzvielfalt des Spannmittels erhöht.
7000 N Horizontal Clamp With Safety Lock, Hooked Stainless Steel, 95mm Thread Length - Kukamet
Take advantage of high holding and clamping forces combined with corrosion‑resistant construction for secure, long‑term fixture performance; order directly via Metav Werkzeuge or consult our specialists for mounting advice. 351 Toggle Latch Clamp – Stainless steel, horizontal foot with safety lock (Kukamet) A robust 351 toggle latch clamp engineered for horizontal mounting on jigs, fixtures and production tooling to provide reliable closure and vibration‑resistant locking. Stainless steel construction Horizontal-foot mount for stable fixing Safety locking mechanism included 7,000 N clamping force, 8,000 N holding force Secure closing that keeps assemblies stable The latch delivers consistent clamping force while resisting loosening during dynamic loads. Designed as a lever‑actuated closure device, the clamp converts manual actuation into a controlled clamping stroke that secures components with up to 7,000 N of closing power and an 8,000 N holding capacity. This predictable performance reduces rework and downtime when fitting parts on conveyors, inspection jigs or welding fixtures. Corrosion resistance for demanding shop environments Constructed from stainless steel, the unit offers enhanced resistance to coolant splash, humidity and industrial contaminants. The material selection extends service life and minimises maintenance cycles compared with plated steel alternatives. Where frequent cleaning or abrasive atmospheres are present, the stainless construction supports sustained operational reliability and less frequent replacement. Safe operation with horizontal mount and lock The horizontal‑foot mounting provides a compact footprint and straightforward attachment to base plates or fixture rails, promoting repeatable alignment. The integrated safety lock prevents accidental release once closed, improving operator safety and process stability in automated or semi‑automated sequences. A built‑in hook adds an additional securing point for positive engagement under vibration. Straightforward integration into production tooling Threaded mounting and a defined 95 mm thread engagement simplify installation and alignment in bespoke fixtures. The compact form factor and clear mechanical function make the latch suitable for retrofitting existing jigs as well as specification in new tooling designs. Documentation and catalogue references are available for design verification and parts list integration. Contact Metav Werkzeuge for technical advice on integrating the Kukamet 351 toggle latch clamp into production fixtures or to request a quotation — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: S351-4-L GTIN: 8680731509694 Manufacturer: Kukamet SKU: S351-4-L Core data Weight: 0.815 kg Max clamping force: 7,000 N Max holding force: 8,000 N Thread length: 95 mm Special features Material: stainless steel Mounting: horizontal foot Safety locking mechanism Hook included Category: Spanner FAQ What is the maximum clamping capacity of this latch clamp? The Kukamet 351 toggle latch clamp provides a maximum closing force of 7,000 N and a holding capacity up to 8,000 N for secure fixture retention. Is the clamp suitable for corrosive or humid environments? Yes, the 351 is made from stainless steel, which improves resistance to moisture and common workshop contaminants compared with standard plated steels. How is the clamp mounted to a fixture? The clamp uses a horizontal‑foot mounting arrangement with a 95 mm thread engagement for reliable attachment to base plates and jigs. Does the unit include a safety mechanism to prevent accidental opening? The Kukamet 351 features an integrated safety locking mechanism and an additional hook for positive engagement under vibration. Can the latch be used on moving or vibratory assemblies? The combination of the safety lock and high holding force makes the clamp suitable for use on assemblies subject to vibration or intermittent loads. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Toggle Clamp Horizontal Base With Hook, 95mm Thread Length - Kukamet
Take advantage of the combination of high holding power, compact mounting design and corrosion-resistant finish to secure fixtures reliably and improve throughput. Order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. Toggle latch clamp 331 — horizontal-base toggle clamp, 7 kN pressing force (Kukamet) A Toggle latch clamp 331 engineered for secure workholding in jigs and fixtures, featuring a horizontal mounting foot for straightforward integration into production setups Robust holding force up to 8,000 N Horizontal base for easy mounting Blackened finish resists corrosion Integrated hook for positive engagement Reliable clamping for consistent production The latch provides a holding force of 8,000 N and a pressing force of 7,000 N, values that translate into dependable restraint for fixtures and workpieces during machining or assembly. These figures describe the forces the mechanism can sustain under load, which helps planners estimate safety margins and cycle capability. Built for repetitive use, the mechanism converts lever motion into a firm closed position, reducing the risk of part movement and enabling shorter cycle times without compromising operator safety. Space-saving design that simplifies installation A compact footprint and horizontal base enable straightforward mounting on fixture plates or tooling blocks where vertical clearance is limited. The clamp weighs 0.72 kg, keeping added mass low on moving assemblies, while the 95 mm thread length allows fine adjustment of the engagement point for precise part location. The combination of low weight and adjustable spindle means faster setup changes and fewer shim adjustments, supporting lean workshop processes and flexible fixturing. Durable surface and secure engagement for long service life Finished in a blackened coating, the housing and components resist wear and show improved resistance to surface corrosion in typical workshop conditions. The unit includes an integrated hook, ensuring a positive mechanical engagement that prevents accidental release under vibration or side loads. These attributes extend service intervals and reduce the need for frequent replacement, contributing to predictable maintenance planning. Practical fit in industrial and trade environments Designed for general fixture applications, this toggle latch clamp suits production lines, toolroom jigs and assembly benches where repetitive clamping is required. The compact mechanism supports modular tooling concepts and quick-change pallets, allowing maintenance and set-up staff to maintain throughput without complex adjustments. For operations aiming to standardise on robust, easy-to-install components, the clamp offers a straightforward performance uplift. Choose the Kukamet toggle latch clamp 331 for robust, repeatable clamping—contact Metav Werkzeuge for specification support and dependable supply from Emmerich. Technical Data SKU: B331-4 GTIN: 8680731508444 Model: 331 Manufacturer: Kukamet Facts Pressing force max: 7,000 N Holding force max: 8,000 N Weight: 0.72 kg Thread length: 95 mm eClass: 21041718 ETIM: EC011973 Special features Horizontal base Blackened finish With hook Category: Spanner FAQ What clamping forces does the clamp provide? The clamp delivers a pressing force of 7,000 N and a holding force of 8,000 N; the Kukamet toggle latch clamp B331-4 is therefore suitable where firm restraint and repeatable closure are required. How is the clamp mounted to a fixture? Mounting is via the horizontal base; the compact foot design of the 331 allows attachment to plates or blocks with standard fasteners and supports low-profile installation. Can the engagement be adjusted to different workpiece heights? Yes, the 95 mm thread length provides adjustment of the spindle to set the exact engagement height and preload required for the application. Is the surface finish suitable for workshop environments? The blackened finish offers improved resistance to wear and surface corrosion in typical industrial and trade environments, helping to prolong service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Toggle Clamp Horizontal Base With Safety Lock, Zinc-Plated - Kukamet
Take advantage of the combination of robust clamping force, corrosion-resistant galvanised construction and a secure safety lock to keep production jigs stable and repeatable. Order the clamp directly via Metav Werkzeuge or consult our advisors for specification matching and delivery options. 351 Toggle clamp Horizontal foot mounting, safety locking — Kukamet The 351 Toggle clamp is a horizontal-foot latch clamp designed for fixed jigs and fixtures, offering a secure, repeatable hold for heavy-duty clamping tasks. Horizontal foot mounting for stable installation Safety lock prevents accidental release Galvanised steel construction resists corrosion 7,000 N clamping force for heavy-duty use Reliable holding power for demanding applications The horizontal latch is engineered to deliver consistent clamping force where repeatability matters. With a rated 7,000 N clamping force and a holding force of 8,000 N, this clamp secures workpieces under substantial load, reducing movement during machining or assembly. The mechanical design converts operator input into reliable holding power, which supports higher process stability and fewer rejects in batch production. The clear numerical ratings allow planners to match the clamp to fixture requirements and calculate safety margins. Durable construction for long service life Constructed from galvanised steel, the clamp withstands humid shop environments and occasional coolant exposure better than plain steel alternatives. The horizontal foot provides a broad, stable base for bolted installation to plates or tooling blocks, simplifying retrofit into existing fixtures. The inclusion of a hook increases application flexibility for different workpiece geometries, while a net mass of 0.815 kg keeps handling straightforward during assembly and maintenance. These characteristics reduce life-cycle costs through extended service intervals and predictable performance. Safety and operational certainty in production A mechanical safety lock prevents unexpected opening, offering an additional layer of protection when handling heavy or sensitive parts. The lock design supports safe clamping sequences in automated or manual processes and reduces the risk of accidental release during load or vibration. Clear tactile feedback at engagement ensures operators can confirm the clamp state quickly — a pragmatic feature that supports efficient throughput without compromising on workplace safety. Simple installation and quick adjustment for fixtures Integration is straightforward: the clamp includes a threaded bar with a 95 mm thread length for height adjustment and fine positioning within a jig. The mounting arrangement suits bolting to flat plates and can be adapted with simple spacers or pads for bespoke setups. The robust mechanical action requires no special maintenance tools; periodic inspection and lubrication keep the mechanism operating reliably. Technical planners benefit from the clear mechanical parameters when documenting fixtures or ordering replacement parts. For reliable fastening with the Kukamet 351 Toggle clamp and its safety lock, contact Metav Werkzeuge for technical advice, delivery options and order placement — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 351-4-L GTIN: 8680731502510 Manufacturer: Kukamet Core specifications Clamping force: 7,000 N Holding force: 8,000 N Thread length: 95 mm Weight: 0.815 kg ECLASS: 21041718 ETIM: EC011973 Materials and features Galvanised steel construction Horizontal foot mounting Safety locking mechanism Hook included Category: Spanner FAQ How much clamping force does this clamp provide? The Kukamet 351 Toggle clamp provides a rated clamping force of 7,000 N and a holding force of 8,000 N for heavy-duty fastening. Is the clamp suitable for use in humid or coolant-prone environments? Yes, the galvanised finish on the 351 latch clamp improves corrosion resistance, making it suitable for workshop environments with occasional moisture or coolant exposure. Can the clamp be adjusted in height for different workpieces? The clamp features a threaded bar with a 95 mm thread length for height adjustment and fine positioning within jigs and fixtures. Does the clamp include a safety mechanism to prevent accidental release? The 351 Toggle clamp is equipped with a mechanical safety lock that prevents unintentional opening, supporting safe handling during production. What mounting method is recommended for fixture integration? The clamp is designed for horizontal foot mounting and is fixed to tooling plates or blocks with bolts; spacers can be used to adapt to specific setup heights. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Toggle Clamp With Horizontal Base, Hook, Zinc Plated, 65mm Thread Length - Kukamet
Galvanised construction and a horizontal base deliver robust, corrosion-resistant clamping; 7000 N closing force and 8000 N holding force provide secure fixation for production fixtures; the compact 0.815 kg unit integrates easily into jigs and assembly rigs. Order the toggle clamp directly via Metav Werkzeuge or consult the specialists for application guidance. 371 light series toggle clamp — Kukamet toggle clamp with horizontal base, galvanised finish 371 light series toggle clamp is a compact lever clamp designed for horizontal mounting in fixtures and jigs, providing repeatable clamping and secure closure for assembly, welding and inspection tasks. Horizontal base for stable mounting Galvanised steel for corrosion resistance Hook-equipped for secure closure 7000 N closing force, 8000 N holding force Secure, measurable clamping performance for production use The clamp offers a clearly defined mechanical performance: a closing force of 7000 N and a holding force of 8000 N, values that ensure dependable fixation under dynamic loads. These rated forces support fast, repeatable operations on production lines and in manual assembly stations, reducing rework and downtime. As a mechanical device without electronic control, the unit provides predictable behaviour under load and can be specified where consistent mechanical retention is required. The performance data are suitable for integration into process documentation and risk assessments. Durable design for workshop and light industrial environments Constructed from galvanised steel with a horizontal base, the clamp resists corrosion while offering a flat mounting face for secure attachment to tooling plates and benches. The presence of a hook ensures positive engagement of the workpiece or fixture, preventing unintended release during handling or vibration. With a compact mass of 0.815 kg, the device minimises added load on movable fixtures and simplifies retrofitting into existing jigs. The robust surface finish and straightforward geometry support long service intervals and low maintenance demands. Practical applications and operational benefits The lever-style locking mechanism suits a wide range of tasks, including repetitive clamping in fixtures and jigs, light welding clamps, and fastening during inspection. The mechanical retention provided by this class of clamp allows rapid cycle times and hands-free locking once engaged, which aids operator efficiency and workplace ergonomics. For applications where predictable mechanical restraint matters—such as assembly, short-run machining or quality control—the clamp contributes to faster set-ups and more stable processing conditions. Identification and specification for procurement and integration Technical classification codes and identifiers facilitate procurement and ERP integration: SKU 371-4, GTIN 8682843523407, eClass 21041718 and ETIM EC011973. The clamp is supplied in the light series configuration and is particularly suited to applications requiring a horizontal mounting foot. The specified thread length 65 mm facilitates secure attachment, while the galvanised material supports general workshop environments. These details enable precise ordering and ensure compatibility with existing tooling systems. For supply or technical advice on the Kukamet 371 light series toggle clamp, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and reliable delivery. Technical Data Article number: 371-4 GTIN: 8682843523407 eClass: 21041718 ETIM: EC011973 Facts Weight: 0.815 kg Closing force: 7000 N Holding force: 8000 N Thread length: 65 mm Special features Material: galvanised steel Mounting: horizontal base With hook: yes Series: 371 light series Category: Clamps (Spanner) FAQ What closing and holding forces does the clamp provide? The Kukamet 371 light series toggle clamp delivers a closing force of 7000 N and a holding force of 8000 N, values intended for reliable mechanical retention in fixtures and jigs. Is the clamp suitable for use on welding fixtures? Yes; the galvanised finish and mechanical locking action make the clamp appropriate for many welding and assembly fixtures, provided the working temperatures and exposure are within standard workshop conditions. How is the clamp mounted to a tooling plate? Mounting is via the horizontal base; the supplied thread length of 65 mm allows secure bolting to plates and benches for stable installation. What material is the clamp made from? The device is made from galvanised steel, chosen for corrosion resistance and durability in general workshop environments. Which identifiers help to order the correct item? Use SKU 371-4 or GTIN 8682843523407; classification codes include eClass 21041718 and ETIM EC011973 for procurement systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Vertical Base Toggle Clamp With Safety Lock, Zinc Plated, 95mm Thread Length - Kukamet
Taking advantage of proven toggle-clamp mechanics and robust corrosion resistance, this latch clamp delivers reliable, repeatable fastening with a 7,000 N clamping force and up to 8,000 N holding capacity. The zinc-plated finish and integrated safety lock ensure long service life and secure operation in jigs and fixtures. Order directly via Metav Werkzeuge or consult the team for specification matching. Kukamet Latch Clamp 312 — Zinc-plated toggle clamp with safety lock and vertical mounting foot The Kukamet Latch Clamp 312 is a zinc-plated toggle clamp designed for secure, repeatable fastening in assembly jigs, fixtures and transport closures. Zinc-plated corrosion protection Safety lock for secure holding Vertical mounting foot for compact installation 8,000 N maximum holding capacity Secure, repeatable fastening for production tasks The latch clamp combines a classic toggle mechanism with a lockable latch to provide consistent clamping action across repeated cycles. The mechanical design converts operator input into a high holding force, enabling reliable fixation of components during machining, assembly or transportation. The vertical mounting foot reduces the footprint on fixtures while maintaining accessibility, making the clamp suitable where space optimisation and repeatability are priorities. This section highlights how construction and geometry translate into dependable process performance. Built for durability and workplace safety Constructed with a zinc-plated surface finish, the clamp resists corrosion in workshop environments and keeps maintenance intervals low. The integrated safety lock prevents accidental release under vibration or impact, addressing common shop-floor safety concerns. With a rated 7,000 N clamping force and 8,000 N holding capacity, the unit is appropriate for medium-duty applications where secure closure under load is required. The use of durable materials and a secure locking feature supports operational safety and reduces risk of workpiece movement. Simple integration and clear technical fit Installation is facilitated by the 95 mm thread length, which allows straightforward adjustment of the latch point and easy integration into existing fixtures. The clamp includes a hook and the mounting arrangement is optimised for vertical-foot attachment, enabling compact positioning on panels or rails. The overall weight of approximately 0.815 kg aids handling during assembly while keeping the fixture mass low. These measurable characteristics make specification and CAD planning more predictable for production engineering teams. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet clamp into production setups or to confirm suitability for specific fixtures and loads — Metav Werkzeuge can support selection and fast supply from Emmerich. Technical Data SKU: 312-4-L GTIN: 8680731502398 Weight: 0.815 kg Material: zinc-plated Mounting: vertical foot Hook: included Safety lock: integrated Thread length: 95 mm Max clamping force: 7,000 N Max holding capacity: 8,000 N Facts Category: clamps / toggle clamps eClass: 21041718 ETIM: EC011973 SKU image available Special features Safety latch mechanism Compact vertical-foot design Zinc-plated finish for corrosion resistance Suitable for repetitive production clamping FAQ What is the maximum holding force of this latch clamp? The Kukamet Latch Clamp 312 offers a maximum holding capacity of 8,000 N, making the clamp suitable for medium-duty securing tasks in fixtures and closures. Is the clamp protected against corrosion? Yes, the clamp features a zinc-plated finish that provides corrosion resistance for workshop and assembly environments. Does the unit include a safety mechanism to prevent accidental opening? An integrated safety lock is provided on the Kukamet latch clamp 312 to reduce the risk of unintended release under vibration or impact. How is the clamp mounted in fixtures? The clamp is designed for vertical-foot mounting and includes a 95 mm thread length to allow adjustment and secure attachment to panels or rails. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Closing Clamp Horizontal Base With Hook, Stainless Steel, 95mm Thread Length - Kukamet
Robust stainless-steel construction combined with a 7 kN closing force and an 8 kN holding capacity ensures dependable clamping and repeatable results in production fixtures; order the latch clamp directly via Metav Werkzeuge or request application advice from our consultants. Kukamet 351 horizontal-foot latch clamp with hook — stainless steel, high holding force The Kukamet 351 is a horizontal-foot latch clamp designed for secure closure and repeatable clamping in jigs, fixtures and transfer systems across workshop and light-industrial environments. *Stainless-steel body for corrosion resistance *Horizontal-foot mounting for fixed-base installation *Hook closure for positive engagement *7,000 N closing force and 8,000 N holding force Durable stainless-steel construction for long service life A heavy-duty stainless-steel body delivers corrosion resistance and structural stability, making the clamp suitable for repetitive production cycles and moderate environmental exposure. The choice of stainless steel reduces maintenance needs and supports consistent clamping performance over time. For applications where material compatibility and longevity matter, the metal construction translates directly into fewer replacements and lower downtime compared with plated or painted alternatives. Secure engagement and repeatability for fixture tasks The clamp uses a hook-style closure paired with a robust toggle mechanism to provide both immediate engagement and sustained holding capacity. With a rated closing force of 7,000 N and a holding force of 8,000 N, the device secures components reliably during machining, welding or assembly operations. This level of mechanical performance supports improved process stability and helps maintain part tolerances by preventing movement under load. Flexible installation and measurable specifications Designed with a horizontal foot for fixed-base mounting, the clamp integrates into tooling plates and welded fixtures with straightforward attachment. A thread length of 95 mm enables fine adjustment of the hook position during set-up, while the compact footprint and a weight of 0.815 kg make it easy to place multiple clamps without excessive added mass. Clear numeric data allow planners to calculate fixture dynamics and ensure the clamp meets cycle and load requirements. Practical benefits for workshop and light-industrial users Incorporating this latch clamp into production tooling improves handling speed and operator confidence through positive mechanical locking and predictable release behaviour. The combination of measured holding capacity and a stainless-steel build supports higher uptime and reduced corrective work — an efficient solution where repeatability and durability are priorities. For procurement, the standardised specifications simplify integration into existing clamping systems and CAD layouts. Contact Metav Werkzeuge for a tailored order or technical guidance on mounting and application of the Kukamet 351 horizontal-foot latch clamp Technical data Article number: S351-4 GTIN: 8680731506709 ECLASS: 21041718 ETIM: EC011973 Core specifications Closing force (max): 7,000 N Holding force (max): 8,000 N Thread length: 95 mm Weight: 0.815 kg Materials & features Material: Stainless steel Mounting: Horizontal foot Hook: Yes Category: Clamp FAQ What is the maximum closing force of this clamp? The Kukamet 351 latch clamp achieves a maximum closing force of 7,000 N, providing strong engagement for a wide range of fixture tasks. Is the clamp suitable for corrosive or humid workshop environments? Yes, the stainless-steel construction of the Kukamet 351 offers enhanced corrosion resistance suitable for workshops with moderate humidity or cleaning procedures. How is the clamp mounted to a fixture plate? Mounting is by horizontal foot; the clamp is designed for fixed-base attachment to tooling plates or welded fixtures, with a 95 mm thread length for positional adjustment. Can the clamp withstand holding loads during machining operations? With a rated holding force of 8,000 N, the Kukamet 351 provides reliable retention under typical machining and assembly loads, supporting process stability. What is the item identifier for ordering and documentation? Order and reference the clamp as SKU S351-4 (GTIN 8680731506709) for accurate procurement and technical documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Closure Clamp Vertical Base With Safety Lock, Stainless Steel, Hooked Spindle 95mm - Kukamet
Reliable locking action combined with high holding and clamping forces provides secure fixture retention in repetitive production tasks; the stainless steel construction and upright mounting base reduce corrosion risk and save space on the workbench. Order the Locking toggle clamp 312 directly via Metav Werkzeuge or ask our consultants if needed. Locking toggle clamp 312 — stainless steel, 8,000 N holding force, safety lock (Kukamet) The Locking toggle clamp 312 is a lever-style latch clamp designed for secure workpiece fixation in industrial assembly, welding and jig applications, offering a compact upright mounting option and an integrated safety lock to prevent accidental release. Stainless steel construction 8,000 N holding force 7,000 N clamping force Vertical base for upright mounting Safety locking mechanism Consistent, measurable clamping performance for production use The clamp delivers defined forces for reliable repeatability in series work: a holding force of 8,000 N and a clamping force of 7,000 N, values that translate into stable part retention under load and during machining. Specified force ratings enable planners to compare fixings objectively and to select a solution that reduces rework and cycle-time variation. The lever mechanism provides rapid actuation, so fixture exchange is efficient, while the straight conversion of lever movement into clamping pressure minimises setup variability and supports automated or semi-automated processes. Built-in safety and reduced operational risk An integrated safety lock secures the clamping position and prevents unintended release during vibration or when the fixture is disturbed, which improves operator safety and protects workpieces from sudden movement. The lock also supports compliance with internal safety routines in production environments and lowers the risk of downtime caused by accidental unclamping. As a lever clamp with a latch-style arrangement, the design provides tactile feedback on engagement, simplifying visual and manual checks at assembly stages. Corrosion resistance and adaptable mounting for workshop resilience Manufactured from stainless steel, the unit resists corrosion in humid or splash-prone environments and is therefore suited to toolrooms and welding benches where longevity matters. The vertical base enables upright installation to save bench space and align with existing fixture plates, while the included hook and a 95 mm thread length offer fine adjustment of engagement distance and accommodate a variety of workpiece geometries. At 0.815 kg, the clamp is robust yet light enough for retrofitting into existing jigs without excessive added mass. For secure, repeatable clamping with a proven safety lock, request the Kukamet Locking toggle clamp 312 from Metav Werkzeuge or contact our advisers at info@metav-werkzeuge.com or +49 2822 7131930 for specification support and ordering guidance Technical Data Article number: S312-4-L GTIN: 8680731509441 Model designation: 312 Manufacturer: Kukamet ECLASS: 21041718 ETIM: EC011973 Facts Holding force: 8,000 N Clamping (pressing) force: 7,000 N Weight: 0.815 kg Thread length: 95 mm Special features Material: stainless steel Mounting: vertical base Safety locking mechanism Hook included Lever clamp design FAQ What clamping and holding forces does the clamp provide? The clamp achieves a clamping force of 7,000 N and a holding force of 8,000 N, making the Kukamet locking toggle clamp 312 suitable for demanding retention tasks. Is the clamp suitable for corrosive or humid environments? Yes, the body is made from stainless steel, so the clamp is resistant to corrosion and appropriate for environments such as welding benches and humid production areas. How is the clamp mounted to a fixture? The clamp uses a vertical base for upright mounting and includes a hook with a 95 mm thread length for adjustable engagement and alignment in fixture plates. Does the clamp prevent accidental release during vibration? The integrated safety locking mechanism secures the lever in the clamped position, reducing the risk of unintended release under vibration or external disturbance. What is the item code for ordering and traceability? Order or reference the component using article number S312-4-L for procurement and inventory tracking. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Horizontal Clamp With Safety Lock, Hook, 95mm Thread Length, Blackened Steel - Kukamet
Take advantage of a compact, high‑force clamp with an integrated safety lock and a horizontal mounting foot to secure fixtures reliably. Benefiting from an 8,000 N holding capacity and a corrosion‑resistant black oxide finish, this clamp supports efficient, repeatable production—order directly via Metav Werkzeuge or consult our technical team for application advice. Kukamet Toggle Latch Clamp 351 (B351-4-L) — Horizontal base, Safety lock A toggle latch clamp 351 designed for heavy‑duty fixturing and assembly work, offering a horizontal mounting foot and an integrated safety lock for secure, repeatable clamping. Horizontal base for stable mounting Integrated safety lock for secure holding Holding force up to 8,000 N Black oxide finish for corrosion resistance Secure high‑force clamping for robust fixtures The toggle latch clamp delivers a holding force of 8,000 N and a pressing force of 7,000 N, providing the mechanical reliability required for demanding jigs and fixtures. The lever action converts operator motion into powerful, sustained clamping pressure; this means shorter setup times and fewer re‑adjustments during machining or assembly. The built‑in hook and a 95 mm thread engagement allow integration into a range of fixture geometries, making the device suitable where firm, vibration‑resistant holding is essential. Safer, repeatable operation reduces downtime An integrated safety lock prevents accidental release and supports consistent process quality by keeping the clamp engaged under shock or vibration. The horizontal base design ensures a low profile and straightforward alignment on machine tables or welded fixtures, while the latch mechanism enables quick manual actuation. These features combine to deliver reproducible clamping cycles that protect components and tooling, improving throughput in batch production or repetitive assembly tasks. Compact, durable construction for everyday workshop use Finished in a black oxide finish, the clamp resists corrosion and shows fewer visible wear marks, extending service life in workshop environments. With a compact mass of 0.815 kg, the unit is easy to handle during installation yet robust enough for heavy‑duty use. The combination of a lever clamp mechanism, hook attachment and a sturdy mounting foot results in a space‑efficient solution that maintains clamping integrity even under frequent operation, reducing the need for replacements and unplanned maintenance. Choose Kukamet quality for dependable clamping — contact Metav Werkzeuge for procurement and tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: B351-4-L GTIN: 8680731508574 SKU: B351-4-L Facts Weight: 0.815 kg Thread length: 95 mm Max pressing force: 7,000 N Max holding force: 8,000 N Special features Mounting: horizontal base Safety lock: integrated Finish: black oxide finish With hook: yes FAQ What is the maximum holding force of this clamp? The Kukamet toggle latch clamp 351 (SKU B351-4-L) provides a maximum holding force of 8,000 N and a pressing force of 7,000 N. Is the clamp suitable for use on welded fixtures and jigs? Yes, the horizontal base and hook attachment make the clamp well suited for welded fixtures, jigs and machine table applications where a low profile and stable mounting are required. Does the clamp include a safety feature to prevent accidental release? The product includes an integrated safety lock that secures the latch and prevents unintended opening under vibration or shock. What surface treatment does the clamp have to resist corrosion? The clamp is supplied with a black oxide finish, offering improved resistance to surface corrosion and a durable appearance for workshop environments. What are the typical applications for this toggle latch clamp? Typical uses include assembly fixturing, holding workpieces during welding, and securing components in production and inspection fixtures where repeatable clamping is critical. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Horizontal Toggle Clamp With Safety Lock, Hardened Black Finish, 65mm Thread Length - Kukamet
Take advantage of a compact, lightweight clamp that combines a 7,000 N clamping force with an 8,000 N holding force and an integrated safety lock for dependable operation in light-duty fixtures; order the Kukamet B371-4-L via Metav Werkzeuge or contact our consultants for application advice. Kukamet B371-4-L toggle latch clamp — horizontal base with safety lock The B371-4-L is a compact toggle latch clamp for light-duty fixturing, featuring a horizontal base, hook latch and a mechanical safety lock for vibration-resistant holding. Horizontal base for secure mounting Safety lock for vibration resistance Hook latch for positive engagement Up to 8,000 N holding force Reliable performance through proven clamping values The clamp delivers a consistent clamping force of 7,000 N and a maximum holding force of 8,000 N, values that translate into repeatable fixture results and reduced rework. Its low mass of 0.815 kg and compact design make it suitable for fixtures where space is limited and cycle times matter. Specified forces refer to static conditions under correct installation; the numeric ratings support objective selection when comparing clamps or designing fixture layouts, improving throughput and lowering scrap rates. Fast engagement with secure, fail‑safe locking Designed for quick manual operation, the latch provides rapid engagement and a positive hook connection that mates securely with a receiving plate. The integrated safety lock prevents unintended release under vibration or shock, which is particularly valuable in machining centres and transfer lines where workpieces are exposed to dynamic loads. The threaded spindle with thread length 65 mm allows fine adjustment of clamp travel and contact pressure, enabling the clamp to be set for accurate workpiece locating without additional shims. Durable finishing and straightforward integration Finished in a blackened finish for corrosion resistance and low reflectivity, the clamp belongs to a light series engineered for frequent use in assembly jigs and inspection fixtures. The horizontal base enables flush mounting to flat surfaces or fixture plates and simplifies alignment during assembly. As a mechanical device with a hook latch and safety lock, maintenance is limited to periodic lubrication and visual inspection, supporting long service intervals and predictable machine availability. Request application guidance from Metav Werkzeuge to specify the Kukamet B371-4-L for your fixtures; technical advice is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: B371-4-L GTIN: 8680731509786 Manufacturer: Kukamet Series: 371 light series Category: Spanner Core specifications Clamping force: 7,000 N Holding force: 8,000 N Thread length: 65 mm Weight: 0.815 kg eClass: 21041718 ETIM: EC011973 Design & features Material: blackened finish Mounting: horizontal base Hook latch included Safety lock fitted With hook FAQ What holding and clamping forces does this clamp provide? The Kukamet B371-4-L toggle latch clamp has a clamping force of 7,000 N and a holding force of 8,000 N when installed and adjusted correctly. Is the clamp suitable for fixtures subject to vibration? Yes. The integrated safety lock prevents accidental release, making the clamp suitable for applications with moderate vibration and dynamic loads. How is the clamp mounted and adjusted? The unit mounts on a horizontal base plate; the threaded spindle (thread length 65 mm) allows adjustment of travel and contact pressure for precise locating. What maintenance is required? Maintenance is minimal: periodic lubrication, inspection of the hook and safety lock, and ensuring the mounting screws remain secure will preserve function and longevity. Can the clamp be used where space is limited? Yes. The light series design and compact footprint, combined with a weight of 0.815 kg, make it well suited to confined fixtures and tight layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Toggle Clamp With Vertical Foot, Safety Locked, Hooked, 95mm Thread Length - Kukamet
Robust holding capacity and an integrated safety lock provide reliable, repeatable clamping; the vertical-foot mounting and hook add mounting flexibility for jigs and fixtures. Order the Kukamet Locking Lever Clamp 312 via Metav Werkzeuge or consult our specialists for application advice. Kukamet Locking Lever Clamp 312 — vertical-foot mounting, integrated safety lock Kukamet Locking Lever Clamp 312 is a compact lever clamp engineered for secure workpiece retention in fixtures and jigs where a vertical base is required. Vertical-foot mounting for upright installation Integrated safety lock for secure engagement Holding force up to 8,000 N Blackened finish for corrosion resistance Secure clamping for repeatable production The Kukamet Locking Lever Clamp 312 delivers dependable clamping with a rated holding force of 8,000 N and a maximum pressing force of 7,000 N, making it suitable for demanding assembly and welding fixtures. The lever mechanism is designed to convert operator movement into a consistent clamp force, reducing variation between cycles; this translates into fewer rejects and more predictable production throughput. The built-in safety lock prevents accidental release during handling, supporting safe operation in busy workshop environments while maintaining fast clamp actuation. Flexible mounting and straightforward integration Vertical-foot mounting provides a compact footprint for upright installation on plates and tooling blocks, while the supplied hook and a 95 mm thread length enable straightforward height and position adjustment. The clamp's mounting arrangement allows it to be used in tight assemblies where horizontal clamps would interfere with tool paths. For engineers specifying fixtures, the combination of a vertical base and an adjustable threaded connection simplifies integration into existing modular systems and reduces setup time during changeovers. Durable finish and compact handling Finished in a blackened surface treatment, the clamp resists corrosion and wear in workshop atmospheres, extending maintenance intervals. At approximately 0.815 kg the unit provides a balance between solidity and ease of handling during fixture assembly. The compact lever clamp design conserves space on fixtures and permits close positioning of multiple clamps where uniform clamping pressure is required. For routine upkeep, the mechanically simple construction allows inspection and lubrication without specialised tools, which supports continuous operation with minimal downtime. Speak to Metav Werkzeuge about the Kukamet locking lever clamp B312 for tailored fixture recommendations; technical advice and ordering assistance are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B312-4-L GTIN: 8680731508369 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.815 kg Thread length: 95 mm Max pressing force: 7,000 N Max holding force: 8,000 N Special features Vertical-foot mounting Integrated safety lock With hook Blackened finish Category: Spanner FAQ What materials can this clamp be used with? The clamp is suitable for general fixture use; the Kukamet locking lever clamp 312 is a mechanical clamping device commonly applied to metal and composite workpieces in jigs and assembly stations. How is the clamp secured to a fixture plate? The unit mounts via its vertical foot and threaded connection; the 95 mm thread length provides adjustment range for setting clamp height and position when installing the Kukamet locking lever clamp B312 (SKU B312-4-L). Does the clamp prevent accidental opening during operation? Yes, the integrated safety lock secures the lever in the engaged position so the locking device remains fixed under load until deliberately released. Is special maintenance required for the lever mechanism? Routine inspection and light lubrication are normally sufficient; the simple mechanical design of the lever clamp reduces maintenance complexity and supports long service intervals. Can several clamps be arranged closely together on a fixture? The compact vertical-foot design allows multiple units to be positioned in proximity, enabling uniform clamping across parts in confined fixture layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
700N Hold Force 550N Clamping Force Vertical Clamp With Metal Handle, Zinc Plated - Kukamet
Secure, repeatable clamping is achieved by combining a zinc-plated body with a metal handle and a compact horizontal foot; the result is reliable fixturing with a holding force of 700 N and a clamping force of 550 N. Order directly via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp 211 — Kukamet zinc-plated clamp with metal handle The Vertical toggle clamp 211 is a compact horizontal-base lever clamp designed for fast, repeatable workpiece securing in assembly, welding and light machining applications. Vertical toggle clamp »211« by Kukamet Zinc-plated steel construction Metal handle for robust handling Holding force 700 N, clamping force 550 N Secure, measurable clamping that speeds production The clamp delivers a defined holding force of 700 N and a clamping force of 550 N, providing quantifiable fixation for jigs and fixtures. These values mean fewer rejected parts and shorter set-up times when replacing or reloading workpieces. The mechanical toggle action locks the arm positively, reducing bounce and ensuring repeatability in serial tasks. For shops seeking predictable throughput, the measurable forces support process planning and quality control. Compact base and adjustable spindle for flexible fixture layouts A horizontal base allows mounting in tight arrangements or onto existing tooling plates without obstructing adjacent fixtures. The included M4x25 pressure spindle enables fine height adjustment to accommodate different stock thicknesses and to set pre-load precisely. At only 0.08 kg, the component adds minimal inertia to robotic end‑effectors or modular fixturing systems, making it suitable for compact clamping arrays where space economy and precise positioning matter. Durable finish and ergonomic handling for long service life Constructed from zinc-plated steel with a metal handle, the clamp resists corrosion in workshops and maintains consistent function under frequent use. The robust grip improves lever control during repetitive cycles, lowering operator fatigue and supporting safe operation. The straightforward mechanism requires minimal maintenance and, when integrated into a workholding solution, contributes to long-term operational reliability and lower total cost of ownership. Contact Metav Werkzeuge for tailored technical advice or to secure the Kukamet vertical toggle clamp 211 for your production setup; reliable supply and consultation are available from our Emmerich location Technical data SKU: 211-0-M GTIN: 8680731501100 ECLASS: 21041717 ETIM: EC011973 Facts Holding force max: 700 N Clamping force max: 550 N Pressure spindle: M4x25 Weight: 0.08 kg Special features Zinc-plated material Metal handle Horizontal foot for mounting Category: Toggle clamp FAQ What holding and clamping forces does this clamp provide? The Kukamet vertical toggle clamp 211 offers a holding force of 700 N and a clamping force of 550 N, values suitable for light to medium fixturing tasks. How is the clamp mounted on a fixture? Mounting is via the horizontal foot; the clamp is designed to be fastened flat to tooling plates or fixture bases for stable positioning. Can the clamp accommodate different workpiece thicknesses? Yes, adjustment is possible via the M4x25 pressure spindle, allowing the clamping height to be fine-tuned for varying stock. What material and finish does the clamp have? The clamp is made from zinc-plated steel and features a metal handle for improved durability and resistance to workshop environments. Is the clamp suitable for automated or robotic fixtures? Its low weight (0.08 kg) and compact horizontal base make the clamp suitable for integration into modular fixtures and some automated setups where a mechanical toggle action is acceptable. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
700N Hold Force 550N Thrust Rod Clamp Horizontal Foot, Blackened - Kukamet
Take advantage of a compact, robust clamp that combines a lightweight construction with a horizontal base for secure fixture mounting; the combination of 700 N holding force and 550 N pressing force supports consistent production processes. Order directly via Metav Werkzeuge or consult the team for specification matching and delivery options. Push‑rod clamp 511 — Kukamet horizontal‑base lever clamp with 700 N holding force The Push‑rod clamp 511 is a compact lever clamp designed for horizontal mounting in fixtures and jigs, offering dependable holding and pressing capacity for small‑scale assembly and machining tasks. Compact horizontal base mounting 700 N holding force rating 550 N maximum pressing force Blackened finish for corrosion resistance Very low weight at 0.092 kg Robust clamping power for compact fixtures The lever‑style clamp delivers a clear technical advantage: a 700 N holding force and a 550 N pressing force, providing stable workpiece retention under moderate loads. This performance is particularly relevant for repetitive assembly operations and small machining setups where a reliable hold reduces rework and cycle time. The push‑rod mechanism converts lever movement into axial force, enabling consistent clamping strokes that are easy to integrate into fixture designs. The combination of measured force values and a compact footprint ensures predictable behaviour in automated or manual workstations. Easy integration and secure mounting Featuring a horizontal base and a standard M4×25 spindle connection, this clamp is designed for straightforward installation in existing jigs and workholding plates. The horizontal mounting orientation minimises interference with tooling and allows for low‑profile fixture layouts. The low mass—0.092 kg—reduces added inertia on moving fixtures and simplifies positioning during assembly. For engineers specifying clamps for compact tooling, the geometry and mounting standard make the unit suitable where space is limited but reliable retention is required. Durable finish and material considerations The component is supplied blackened to enhance surface resistance against corrosion and wear in standard workshop environments. This finish supports longevity in regular use without adding significant bulk or weight. The lever design, constructed for repetitive engagement, benefits from the protective treatment to maintain consistent sliding and contact characteristics over time. Where visual uniformity and basic surface protection are required, the treated surface reduces the need for frequent replacement and supports predictable service life. Practical advantages for production and maintenance A straightforward mechanical clamp with a lever action reduces maintenance complexity compared with pneumatic or hydraulic alternatives. The simple construction limits potential failure modes and facilitates quick replacements in modular fixtures. The measured force ratings and standard attachment method deliver an efficient solution for production lines seeking cost‑effective holding devices that require minimal upkeep. The compact design and light weight additionally contribute to easier handling and reduced fixture load during assembly changes. For compact fixtures that demand reliable 700 N holding capability, contact Metav Werkzeuge for tailored advice and supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: B511-0 GTIN: 8682843522516 Manufacturer: Kukamet Category: Spanner ETIM: EC011973 ECLASS: 21041716 Facts Weight: 0.092 kg Holding force (max): 700 N Pressing force (max): 550 N Spindle / contact screw: M4×25 Special features Horizontal base mounting Blackened finish Lever clamp / push‑rod action No additional special feature specified FAQ What is the main function of this clamp? The Push‑rod clamp 511 is a lever‑operated holding device intended for horizontal mounting in fixtures and jigs to secure workpieces with defined holding and pressing forces. Can the clamp be mounted in custom fixtures? Yes, the horizontal base and M4×25 spindle make the clamp suitable for integration into bespoke fixtures and workholding plates. What materials and finish are used? The clamp is supplied with a blackened finish to improve surface resistance; the construction supports regular workshop use with enhanced durability. Is the holding force sufficient for light machining tasks? With a 700 N holding force and 550 N pressing force, the unit is designed for light to moderate retention requirements typical in assembly and small machining operations. Where to get technical support or order replacements? Technical advice and replacement supply are available through Metav Werkzeuge; consult the contact details provided for specification support and ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
700N Holding Force 550N Clamping Force Vertical Clamp, Zinc Plated - Kukamet
Reliable vertical clamping with measurable forces and corrosion-resistant finish ensures repeatable set-ups and reduced fixture time; use the combination of clamping force 550 N, holding force 700 N and galvanised construction for robust, light-duty production tasks. Order the clamp via Metav Werkzeuge or consult their specialists for precise application advice. Vertical toggle clamp 212 by Kukamet — vertical foot mounting, 550 N clamping force The Vertical toggle clamp 212 is a compact vertical clamping device designed for secure workpiece retention on jigs and fixtures in light industrial and workshop environments. Vertical foot mounting Clamping force 550 N Holding force 700 N Galvanised steel construction Consistent force where it matters The 212 delivers a clearly defined clamping force of 550 N and a holding force of 700 N, values that translate directly into predictable fixture behaviour and reduced rework. These numeric ratings allow planners to compare clamping performance objectively and to design fixtures with known safety margins. The mechanism is a conventional toggle design, which locks reliably under load and releases quickly when required; the combination of measured force and simple mechanics supports efficient cycle times and repeatable results. Easy integration and fine adjustment Mounting is via a vertical foot, which simplifies installation on platen surfaces and reduces vertical profile compared with horizontal base variants. Fine adjustment is achieved through the M4×25 pressure spindle, allowing small variations in contact height without replacing parts. At a weight of 0.072 kg, the unit adds negligible mass to assemblies, which assists in jig balancing and reduces wear on support structures. The galvanised finish protects the surface in everyday workshop environments and minimises maintenance needs. Suitable for workshop and light-production tasks Made from galvanised material and supplied as a compact toggle clamp, the item is intended for repetitive clamping duties where space and reliability are priorities. The device is well suited to fixtures, small-batch assembly, and training workshops where robust, low-complexity components are preferred. As a simple mechanical clamping solution, it removes the need for complex pneumatics in many applications and supports a pragmatic approach to fixture design. Choose the Kukamet 212 vertical toggle clamp for dependable vertical clamping and contact Metav Werkzeuge for application guidance and reliable supply from their Emmerich facility. Technical data Article number: 212-0 GTIN: 8680731505016 Manufacturer: Kukamet Facts Clamping force max: 550 N Holding force max: 700 N Weight: 0.072 kg Pressure spindle: M4×25 Special features Material: galvanised Mounting: vertical foot Arm: not applicable Particular feature: none FAQ What clamping and holding forces does the clamp provide? The 212 vertical toggle clamp provides a clamping force of 550 N and a holding force of 700 N, allowing for reliable retention in light-duty fixtures. How is the clamp mounted? The unit is designed for vertical foot mounting, which facilitates integration into platen-mounted jigs and fixture plates. Is fine adjustment possible on the clamp? Yes, adjustment is performed via the M4×25 pressure spindle, enabling precise contact-height settings. What material and surface protection does the clamp have? The clamp is manufactured in galvanised material, offering corrosion resistance suitable for standard workshop conditions. Is the clamp suitable for heavy industrial applications? The clamp is intended for workshop and light-production tasks; its specified forces and compact form factor are optimised for small to medium fixtures rather than heavy industrial presses. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
700N Holding Force Vertical Clamp 550N Clamp Force Horizontal Base Blackened Steel - Kukamet
Take advantage of the 550 N clamping force and 700 N holding capacity in a compact, lightweight package to secure repetitive workholding operations reliably; order the Vertical Clamp via Metav Werkzeuge or consult the Metav team for integration advice and supply from Emmerich. Vertical Clamp 211 – vertical toggle clamp, 550 N clamping force (Kukamet) The Vertical Clamp 211 is a compact vertical toggle clamp with a horizontal base, designed for fixture and jig workholding in light to medium industrial applications. 550 N clamping force 700 N holding capacity Horizontal base for fixture mounting M4×25 adjustable pressure spindle Black oxide finish, weight 0.072 kg Reliable clamping that keeps production moving The Vertical Clamp 211 delivers repeatable clamping force of 550 N and a holding capacity of 700 N, providing measurable security for short-cycle operations. The toggle mechanism converts manual lever action into a stable clamping lock, reducing setup time and the risk of slippage during machining or assembly. By using a defined clamping force, process planners gain predictability: tool wear and part deformation are easier to control, which supports higher throughput and consistent quality across batches. Space-saving design for easy integration into fixtures Engineered with a horizontal base, the unit integrates directly into jigs and modular fixture plates without complex adapters. At just 0.072 kg, the device is exceptionally lightweight, easing positioning and reducing added mass on moving assemblies. The compact footprint allows multiple clamps to be installed closely for distributed holding points, enabling even pressure distribution and minimising part distortion. This practical design supports efficient fixturing layouts and quicker changeovers on production lines. Adjustable contact and resilient finish for industrial use The clamp features an M4×25 adjustable pressure spindle, enabling fine tuning of contact height and pre-load to suit varied workpiece geometries. The black oxide surface treatment provides basic corrosion resistance and a subdued appearance that resists marking sensitive parts. Constructed as a lever-style toggle clamp, it requires no additional arm attachment and is intended for straightforward mechanical operation and low-maintenance routines, offering reliability across repetitive cycles while keeping handling intuitive for operators. For dependable fixture work, choose the Kukamet Vertical Clamp 211—contact Metav Werkzeuge in Emmerich for technical guidance and reliable supply at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: B211-0 GTIN: 8682843522233 SKU: B211-0 Manufacturer: Kukamet Facts Clamping force max: 550 N Holding force max: 700 N Weight: 0.072 kg Pressure spindle: M4×25 ECLASS: 21041717 ETIM: EC011973 Special features Horizontal base mounting Black oxide finish Lever-style toggle clamp No swing arm (not applicable) No additional special features FAQ What maximum clamping force does this clamp provide? The Vertical Clamp 211 provides a maximum clamping force of 550 N and a holding capacity of 700 N for stable fixation during machining and assembly. How is the clamp mounted to a fixture? Mounting is via a horizontal base, designed for direct installation into fixture plates and jigs used in production setups. Is the contact pressure adjustable? Yes, the contact is adjustable via an M4×25 pressure spindle to set the required pre-load and height for different workpieces. What is the unit weight and how does this affect fixtures? The clamp weighs 0.072 kg, which minimises added mass on moving fixtures and facilitates compact, high-density fixturing arrangements. Does the clamp have a corrosion-resistant finish? The unit is supplied with a black oxide finish that offers basic corrosion protection and a low-marking surface suitable for many workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70mm Horizontal Clamp With Angle Base Size 3 M8x45 Pressure 1800N Holding 2500N - AMF
Take advantage of a compact, flexible clamping solution that combines a right-angled mounting foot with a size 3 form factor and clear force ratings; the combination of 1,800 N max clamping force and 2,500 N holding force ensures secure workholding for light to medium machining tasks. Order the horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp No. 6833, size 3, angled foot (AMF) — robust clamping with 1,800 N clamping force The Horizontal clamp No. 6833, size 3, angled foot (AMF) is a compact horizontal workholder designed for fixture plates and machine tables where angled mounting improves accessibility and setup flexibility Size 3 with angled foot Max clamping force 1,800 N Holding force up to 2,500 N Secure, measurable clamping for repeatable production The clamp delivers clearly defined performance: a maximum clamping force of 1,800 N for active clamping operations and a holding force of 2,500 N for static retention. These figures provide a reliable basis for process planning and tool-path strategy, allowing production engineers to calculate fixture loads and select suitable cutting data. The rated forces are particularly important in jigs for milling and drilling where consistent contact pressure reduces part movement and improves dimensional repeatability. The specified values help avoid guesswork and support predictable cycle times. Flexible mounting and practical dimensions for compact fixtures Fitted with an angled foot, the clamp adapts to tight layouts and angled fixturing without additional brackets. The integrated pressing screw M8 x 45 and a clear overall length L1 206 mm enable straightforward installation on T-slots and fixture plates. The right-angled base reduces horizontal space while providing a stable bearing surface, which simplifies set-up for small-batch production and repair work. The clamp’s geometry supports quick positioning and alignment, reducing non-productive time during changeovers. Practical robustness for workshop and small-series applications Designed as a purpose-built horizontal workholder, the component balances compactness with stable retention. The sturdy construction that yields high holding capacity is suitable for assembly stations and machining centres handling light to medium workpieces. Maintenance is minimal: the simple mechanical design limits wear parts to the pressing screw and contact surfaces, allowing long service intervals and uncomplicated replacement procedures. This makes the clamp a practical choice for workshops seeking dependable, low-maintenance fixturing. Contact Metav Werkzeuge for tailored advice on integrating the AMF horizontal clamp No. 6833 into existing fixtures, with fast supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 4123660130NW Type: 6833 Label: Waagrechtspanner Nr.6833 Gr.3 Winkelfuß AMF Manufacturer: AMF Packaging unit: 1 Facts Max clamping force: 1,800 N Max holding force: 2,500 N Size: 3 Pressing screw: M8 x 45 Overall length L1: 206 mm H: 70 mm; H1: 86.5 mm; H2: 86 mm Special features Angled foot for right-angled mounting Angle a: 90° A: 8 mm; B: 59 mm; C: 24 mm; D: 6.8 mm; E: 37 mm; F: 6.5 mm I: 15 mm; K: 7 mm; M: 28.5 mm; N: 42.5 mm; P: 38 mm FAQ What clamping and holding forces can be expected from this clamp? The AMF horizontal clamp No. 6833 (SKU 4123660130NW) provides a maximum clamping force of 1,800 N and a holding force of up to 2,500 N for secure retention during machining. Is the clamp suitable for mounting on fixture plates with T-slots? Yes, the angled foot and the overall length of 206 mm make the clamp compatible with common fixture plates and T-slot arrangements when combined with the M8 x 45 pressing screw. Which applications suit this horizontal clamp best? The clamp is well suited to small-series machining, assembly stations and jigs where compact, repeatable clamping and easy access are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70mm Horizontal Clamp With Automatic Height Adjustment, 2.5kN Clamping Force, 217mm Reach - BESSEY
Combining automatic clamping-height adjustment with a stable horizontal base plate and a max. clamping force of 2,500 N, this clamp secures varying workpiece thicknesses quickly and reliably; ideal for jigs and fixture use in production and workshops. Order the clamp directly via Metav Werkzeuge or consult the technical team for application support. BESSEY STC-HH70 Horizontal clamp – Automatic height adjustment, horizontal base plate The STC-HH70 is a horizontal hold-down clamp designed for jigs, fixtures and general workshop use, offering automatic clamping-height adjustment to accommodate variable material thickness. Automatic clamping-height adjustment Horizontal base plate for stable mounting Max. clamping force 2,500 N Compact size 70 with 217 mm reach Faster, more reliable clamping for mixed production The combination of automatic clamping-height adjustment and a max. clamping force of 2,500 N delivers consistent results across mixed batches and single-part operations. The height compensation prevents overtravel and reduces setup time by absorbing variations in workpiece thickness without manual intervention. For production planners, this means fewer stoppages for re‑adjustment and a measurable improvement in cycle reliability. The clamp is particularly suited to repetitive holding tasks where repeatability and steady clamping pressure matter. Simple integration and stable mounting reduce downtime Fitted with a horizontal base plate, the unit provides a firm mounting interface for fixture plates and assembly jigs. The 217 mm reach (L1) and compact footprint allow positioning close to the work area while maintaining clearance for tooling. Clear dimensional data (A, B, C, E, H1, I, M, N, P) support precise layout planning and ensure compatibility with existing fixtures. The clamp’s design reduces the need for custom adaptors and speeds up commissioning in both small workshops and production lines. Practical benefits for workshop and industrial use Constructed for everyday workshop conditions, this horizontal hold-down solution suits metalworking, assembly and fixture building where predictable clamping is required. The automatic adjustment protects delicate components from excessive force while still enabling high holding power when needed, improving handling safety and part integrity. With its compact size and stable mounting, the clamp aids ergonomic workbench design and contributes to a tidier, more efficient workflow. Contact Metav Werkzeuge for tailored application advice or to request a technical quote for the BESSEY STC-HH70; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000831135NW Model: STC-HH Label: Waagrechtspanner STC-HH70 Gr.70 waagrechte Grundpl.BESSEY Product type: Horizontal clamp Execution: automatic clamping-height adjustment Packaging unit: 1 Manufacturer: BESSEY UID: 4000831135NW Facts Max. clamping force: 2,500 N Size: 70 A: 13 mm B: 77 mm C: 25.4 mm E: 40 mm H1: 44 mm I: 14 mm L1: 217 mm M: 33–48 mm N: 60 mm P: 53 mm Special features Automatic clamping-height adjustment Horizontal base plate Compact design for tight layouts Suitable for jigs and fixtures Stable, repeatable holding force FAQ What is the maximum clamping force of this clamp? The BESSEY STC-HH70 horizontal clamp provides a maximum clamping force of 2,500 N, suitable for secure holding in many workshop and light industrial applications. How does the automatic clamping-height adjustment work? The clamp’s automatic height adjustment compensates for variations in workpiece thickness, allowing controlled travel and consistent clamping pressure without manual re‑setting, which speeds up setup and reduces errors. Which dimensions are most relevant for planning a fixture? Key dimensions include the 217 mm reach (L1) and the adjustment range M: 33–48 mm; the full set of measurements (A, B, C, E, H1, I, N, P) supports precise fixture layout and alignment. Is the clamp suitable for use in production jigs and assembly lines? Yes. The horizontal hold-down design and stable base plate make it well suited for jigs, fixtures and repetitive assembly tasks where fast, repeatable clamping is required. Does the clamp require special mounting hardware? The base plate provides a standard mounting surface for direct attachment to fixture plates; any additional adapters depend on the individual jig design rather than on the clamp itself. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70° 2000 N Pneumatic Clamp Heavy Duty Horizontal Base Modular Piston, No Handle - Kukamet
Take advantage of the robust holding capacity and modular mounting to secure heavy workpieces reliably in production fixtures; the combination of a high holding force, compact weight and a corrosion-resistant finish ensures long-term operational stability. Order the clamping solution directly via Metav Werkzeuge or consult our specialists for application-specific integration. Pneumatic clamp 683-6 — heavy-duty pneumatic clamping solution with 11,000 N holding force (Kukamet) The Pneumatic clamp 683-6 is a heavy-duty, piston-actuated clamping device designed for industrial fixtures and production jigs, offering a compact horizontal-foot mounting and a 70° operating angle for versatile positioning. Heavy-duty 11,000 N holding force 2,000 N actuation force for secure clamping Horizontal foot, modular piston design Black oxide finish for surface protection Stable clamping for demanding fixtures The 683-6 delivers a proven 11,000 N holding force that keeps components immobile during machining and assembly operations. The distinct separation between actuation and holding values — with a 2,000 N actuation force producing a much larger sustained holding capacity — provides a clear safety margin against workpiece movement. For production engineers, this means fewer rejects and reduced rework, since the device maintains clamping integrity even under vibration or intermittent loading. The compact mass of 8 kg supports stable installation without excessive fixture bulk. Flexible mounting and precise movement control Equipped with a horizontal foot and a modular piston arrangement, the clamping device integrates into a variety of fixture geometries with straightforward mounting options. The 70° operating angle yields good access for loading and unloading while ensuring a positive toggle action during clamping. The absence of a manual handle simplifies automation and reduces interference in tightly packed tooling areas, making the clamp suitable for semi-automatic and fully automated production cells. The modular concept facilitates replacement or reconfiguration without extensive fixture redesign. Durable finish and heavy-duty construction for long service life Surface treatment in black oxide provides corrosion resistance and a low-reflective surface that is advantageous in precision environments. The heavy-duty version is engineered for repeated cycles and robust use in industrial contexts, where longevity and consistent performance are required. The design focus on durable materials and mechanical simplicity makes maintenance predictable and parts replacement manageable, contributing to lower total cost of ownership over the clamp's service life. Integrating this clamping solution supports stable process control and reliable throughput. For heavy-duty clamping requirements, contact Metav Werkzeuge to discuss how the Kukamet 683-6 can be integrated into existing fixtures; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 683-6 GTIN: 8682843521762 eClass: 21021004 ETIM: EC011973 SKU: 683-6 Facts Max actuation force: 2,000 N Max holding force: 11,000 N Weight: 8 kg Operating angle: 70° Special features Material: black oxide finish Mounting: horizontal foot, modular with piston Version: heavy-duty Special: without handle Category: spanner Story trigger: lever clamp FAQ What is the maximum holding force of this clamp? The holding capacity is 11,000 N for the Kukamet Pneumatic clamp 683-6, providing robust retention for heavy workpieces. How is the clamp mounted in a fixture? Mounting uses a horizontal foot with a modular piston connection, allowing secure installation in common jig and fixture layouts. Does the clamp include a manual handle? This heavy-duty variant is supplied without a handle; it is intended for pneumatic actuation and automated or semi-automated processes. What surface protection does the device have? The clamping unit is finished with a black oxide coating, offering corrosion resistance and a subdued surface appearance. Is the clamp suitable for automated production cells? Yes. The piston actuation and lack of a manual handle make the device well suited to integration in automated or semi-automated systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70° Pneumatic Clamp Heavy Duty Horizontal Foot With Right Handle, 1600 N Stroke Force 5600 N Holding Force - Kukamet
Take advantage of a heavy-duty pneumatic clamp that combines fast, reproducible actuation with decisive holding capacity; the robust construction and blued finish ensure long service life in demanding production environments. Order the clamp directly via Metav Werkzeuge or consult the sales team for application advice. Kukamet Pneumatic Clamp 683-4-H-R — heavy-duty, 1,600 N actuation The 683-4-H-R pneumatic clamp is a heavy-duty, right-hand clamp with a horizontal mounting foot, engineered for secure, repeatable workpiece fixation in machining and production jigs. Heavy-duty pneumatic clamp, horizontal foot Actuating force 1,600 N, rapid clamping Holding force up to 5,600 N for secure fixing Right-hand lever with blued finish Consistent clamping for machining and assembly A robust solution for fixture work, the clamp delivers reproducible clamping through pneumatic actuation, helping to maintain process stability across batch production runs. The combination of a 1,600 N actuating force and a holding force of 5,600 N provides a clear safety margin for typical machining and assembly tasks, reducing the need for repeated adjustments. The horizontal-foot design supports fast integration into existing fixture plates and t-slotted tables, enabling efficient set-up and minimised downtime. Pneumatic operation tuned for productivity Pneumatic drive offers high cycle speed and low operator effort; the actuator design converts compressed-air input into reliable lever motion for swift engagement. The clamp’s 70° arm angle and lever mechanics are optimised for short stroke travel and secure locking, which shortens cycle times and increases throughput. For workshops seeking repeatable, low-maintenance clamping, this pneumatic arrangement reduces mechanical wear compared with purely mechanical clamps while preserving high clamping consistency. Built for workshop durability and clean handling Constructed in a blued finish that resists light corrosion and keeps contact surfaces tidy, the unit balances robustness with manageable weight at 4.98 kg, allowing straightforward handling during installation. The right-hand lever configuration and the horizontal mounting foot make it suitable for fixtures where space and clearance dictate lever orientation. Surface treatment and solid construction extend service intervals and lower lifecycle intervention for routine maintenance. Integration and application advantages The clamp’s form factor and technical data make it suitable for a range of applications including machining jigs, assembly fixtures and repetitive production processes. The heavy-duty version supports demanding clamping tasks in metalworking and general fabrication. Where mechanical stability and rapid repeatability are priorities, the clamp integrates into modular fixture systems and can be combined with pneumatic control valves for centralised clamping management. Contact Metav Werkzeuge today to discuss fitment options for this Kukamet clamp and secure a reliable supply from the Emmerich quality hub Technical data Article number: 683-4-H-R GTIN: 8682843521755 Manufacturer: Kukamet Core specifications Actuating force: 1,600 N Holding force: 5,600 N Weight: 4.98 kg Arm angle: 70° Design & features Material/finish: blued finish (blackened) Mounting: horizontal foot with handle Handle side: right-hand Version: heavy-duty Category: clamp / spanner FAQ What is the primary application for this pneumatic clamp? The 683-4-H-R is intended for fixture and jig clamping in machining and repetitive assembly where fast, reproducible locking and high holding force are required. Can the clamp be mounted on t-slotted tables or fixture plates? Yes; the horizontal foot mounting is suitable for integration into t-slot tables and modular fixture plates. Is the lever orientation fixed to the right? The supplied version features a right-hand lever; selection of handle side is a defining characteristic of this SKU. What maintenance is required for long service life? Routine inspection of pneumatic connections and periodic lubrication of pivot points maintain performance; the blued finish reduces surface corrosion and cleaning frequency. Does the clamping unit support heavy machining loads? With an actuating force of 1,600 N and holding force up to 5,600 N, the unit is designed to withstand substantial machining and assembly loads when correctly installed. Who supplies this clamp and where is stock held? This clamp is supplied by Kukamet and distributed via Metav Werkzeuge’s Emmerich hub for European customers Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70° Pneumatic Clamp Heavy Duty Without Handle, Horizontal Base Modular Piston, 1,600 N Thrust - Kukamet
Take advantage of a combination of robust clamping force, compact installation options and a corrosion-resistant finish for reliable cycle times in production environments. Order the Kukamet Pneumatikspanner directly via Metav Werkzeuge or ask Metav's consultants for application advice. Kukamet Pneumatikspanner – heavy-duty pneumatic clamp with horizontal foot and modular piston The Pneumatikspanner is a heavy-duty pneumatic clamp designed for industrial workholding and automated fixturing in production and assembly lines. Heavy-duty pneumatic clamping 1,600 N Holding force up to 5,600 N Horizontal foot, modular piston mount Black blued finish for corrosion resistance Consistent clamping performance that reduces rework The clamp delivers a defined actuation force of 1,600 N and a holding force of 5,600 N, providing reproducible workpiece fixation that helps to reduce rejects and rework. Repeatability is achieved through the pneumatic piston design and the robust construction, which together ensure consistent stroke behaviour under cyclical loads. This level of force control is particularly beneficial for machining, welding and assembly operations where fixture stability directly affects part quality. The compact mass of the unit contributes to minimal inertial effects during rapid cycling. Compact mounting and low-maintenance operation for automated lines Designed with a horizontal foot and a modular piston mounting, the device is suitable for tight fixture layouts and straightforward integration into automated tooling. The black blued finish improves surface durability and provides basic corrosion protection in workshop environments. The spanner is supplied without a handle, a deliberate choice that favours machine-vision access and prevents accidental interference in automated cells. Service requirements are limited to routine pneumatic and seal checks; the simple mechanical layout facilitates quick replacement of wear components where needed. Improved throughput and safe handling for industrial workflows By shortening clamp cycle times and providing secure locking, the unit contributes directly to higher throughput and reduced operator handling time. Secure fixation lowers the risk of workpiece movement during machining, improving tool life and dimensional accuracy. The Pneumatikspanner's heavy-duty version and robust finish make it appropriate for continuous use in demanding production settings; documentation and dimensional data support rapid integration into existing fixtures. For further technical matching to specific machines or fixtures, Metav's technical consultants can supply supplementary data and engineering guidance. Contact Metav Werkzeuge for tailored integration advice and reliable supply of the Kukamet Pneumatikspanner (SKU 683-4) from Emmerich. Technical data Article number: 683-4 GTIN: 8682843521731 Manufacturer: Kukamet Facts Max actuation force: 1,600 N Max holding force: 5,600 N Weight: 4.9 kg Angle: 70° eCl@ss: 21021004 ETIM: EC011973 Special features Mounting: horizontal foot, modular with piston Finish: black blued Design: heavy-duty version Feature: supplied without handle FAQ What is the maximum clamping force of this pneumatic clamp? The Kukamet Pneumatikspanner offers an actuation force of 1,600 N and a holding force up to 5,600 N (SKU 683-4). Can the clamp be integrated into automated fixtures? Yes, the horizontal foot and modular piston design permit compact integration into automated tooling and production cells. What surface treatment does the spanner have? The unit is supplied with a black blued finish, providing improved surface durability and basic corrosion resistance. Is a handle included with the clamp? No, the Kukamet Pneumatikspanner is supplied without a handle to facilitate automation and avoid accidental interference. What information is available for CAD integration? Dimensional and technical data are provided for the Kukamet Pneumatikspanner (683-4); Metav can supply further drawings on request. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70° Pneumatic Clamp Heavy-Duty Horizontal Base Left Handle, 1,600 N Push, 5,600 N Hold - Kukamet
Take advantage of a combination of high holding force, robust construction and user‑friendly mounting for reliable fixture performance; the heavy‑duty pneumatic clamp delivers repeatable clamping and simple installation. Order the Kukamet unit directly via Metav Werkzeuge or consult our advisers for fixture integration and layout suggestions. 683-4-H-L Pneumatic Clamp (Heavy‑Duty) by Kukamet — 70° Angle, Left Handle The 683-4-H-L pneumatic clamp is a heavy‑duty clamping solution for industrial fixtures, designed to provide secure, repeatable holding in assembly and machining applications. Heavy‑duty pneumatic actuation Holding force 5,600 N Horizontal base with left handle Black oxide finish for corrosion protection Robust holding for demanding production tasks Built for industrial fixtures, this heavy‑duty pneumatic clamp gives a dependable holding force of 5,600 N, ensuring workpieces remain secure during machining and assembly operations. The high clamping capacity reduces rework and downtime by maintaining part position under load; this translates into fewer stoppages and a smoother production flow. The clamp’s mass and finish contribute to stable performance across repetitive cycles. Precise actuation and repeatability With an actuation force of 1,600 N and a 70° angle lever path, the unit provides controlled, repeatable clamping strokes that simplify process design. Pneumatic actuation enables rapid cycle times and consistent pressure, which supports accurate positioning in jigs and fixtures. For applications where consistent clamping pressure matters, the clamp’s mechanics reduce variability compared with manual lever methods. Installation flexibility and ergonomic access A horizontal base with an integrated handle and a left‑side handle orientation allow straightforward mounting in many fixture layouts and accessible operation within confined workspaces. The left handle helps when space or operator approach dictates clamp orientation. At a practical weight of 4.98 kg, the device combines stability with manageable handling during assembly into modular tooling. Durable finish and maintenance advantages Finished in a black oxide (blackened) coating, the clamp resists surface corrosion and fits hygienic shop environments without excessive maintenance. The heavy‑duty construction minimises wear on pivot points and seals, reducing intervention frequency. Where uptime and low life‑cycle costs are priorities, this clamp offers a balance of robustness and straightforward upkeep. For robust fixture requirements and integration advice on the Kukamet heavy‑duty pneumatic clamp, contact Metav Werkzeuge for tailored recommendations and ordering assistance; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 683-4-H-L GTIN: 8682843521748 Manufacturer: Kukamet Facts Weight: 4.98 kg Holding force (max): 5,600 N Actuation force (max): 1,600 N Clamping angle: 70° eClass: 21021004 ETIM: EC011973 Special features Heavy‑duty version Horizontal base with handle Handle left Material: blackened (black oxide) finish Category: Clamping devices (Spanner) FAQ What materials can be clamped with this device? The Kukamet 683-4-H-L pneumatic clamp is suitable for general industrial workholding applications; its design supports secure clamping of parts commonly used in assembly and machining fixtures. How much holding force does the clamp provide? The unit provides a maximum holding force of 5,600 N, delivering robust retention for demanding operations and ensuring minimal part movement under load. What are the mounting options for this clamp? The clamp features a horizontal base with an integrated handle for direct fixture mounting; the left‑hand handle orientation offers installation flexibility for many jig arrangements. Is the surface finish suitable for shop use? Yes, the blackened (black oxide) finish provides basic corrosion resistance and a low‑maintenance surface suitable for workshop environments. Which SKU should be referenced when ordering spares or replacements? Reference SKU 683-4-H-L and the Kukamet designation when enquiring about spare parts or replacements to ensure correct component matching. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70° Pneumatic Heavy-Duty Clamp, 2 000 N Actuation, 11 000 N Holding Force, Right Handle - Kukamet
Take advantage of the combination of high holding force, robust pneumatic actuation and a durable blackened finish for reliable fixture clamping and uninterrupted production. Order the clamp directly via Metav Werkzeuge or contact our consultants for application-specific advice. Pneumatic clamp »683-6-H-R« – heavy-duty, right-hand handle A robust pneumatic clamp designed for industrial fixtures, offering high holding capacity and compact horizontal-base installation Pneumatic clamp »683-6-H-R« heavy-duty Holds up to 11,000 N clamping force Actuation force max 2,000 N Right-hand handle, horizontal base, 70° angle Secure holding that reduces rework and increases throughput The Kukamet pneumatic clamp delivers a holding force of 11,000 N, ensuring stable fixation of workpieces during machining and assembly. High clamping capacity reduces vibration and movement, which in turn lowers the risk of scrapped parts and rework. The heavy-duty construction contributes to consistent cycle performance in serial production, making the clamp suitable for demanding workshop and light industrial environments where process reliability is essential. Fast, repeatable actuation and straightforward fixture integration Equipped with a pneumatic actuator that exerts a maximum actuation force of 2,000 N, the unit allows for rapid and repeatable clamping cycles, supporting efficient throughput on automated or semi-automated lines. The horizontal base with an integrated handle and a 70° swing angle permits compact mounting and predictable motion paths, while the right-hand handle variant fits many standard fixture layouts. At 8.13 kg, the mass of the clamp helps maintain stability once installed, reducing the need for additional counterbracing. Durable surface and clear technical classification for procurement The component is finished in a blackened (brunished) surface, offering increased resistance to wear and a reduced visual impact in production areas. Classified under ETIM EC011973 and eCl@ss 21021004, the clamp is straightforward to specify in procurement systems and compatible with standard fixture documentation. The robust design minimises maintenance intervals and supports long service life, helping to lower total cost of ownership through extended uptime. Contact Metav Werkzeuge for tailored clamping solutions or technical advice on the Kukamet pneumatic clamp »683-6-H-R« with 11,000 N holding force — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 683-6-H-R GTIN: 8682843521786 Brand: Kukamet Facts Weight: 8.13 kg Holding force (max): 11,000 N Actuation force (max): 2,000 N Angle: 70° ETIM: EC011973 Eclass: 21021004 Special features Heavy-duty version Horizontal base with handle Right-hand handle Finish: blackened (brunished) Category: Spanner FAQ What clamping capacity does the clamp offer? The Kukamet pneumatic clamp »683-6-H-R« provides a maximum holding force of 11,000 N for secure fixation during machining. How much actuation force is required for operation? Pneumatic actuation requires a maximum force of 2,000 N, as specified for the model 683-6-H-R. Is the clamp suitable for automated fixtures? Yes, the combination of repeatable pneumatic actuation and a compact horizontal base makes the clamp suitable for automated and semi-automated fixtures. What surface protection does the unit have? The clamp is supplied with a blackened (brunished) finish that improves wear resistance and reduces corrosion risk in standard workshop environments. Which SKU should be referenced when ordering spare parts or accessories? Reference SKU 683-6-H-R together with the Kukamet brand to ensure compatibility and correct spare parts allocation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
71° 2500 N Horizontal Clamp With 2800 N Holding Force, Zinc Plated - Kukamet
Take advantage of secure, repeatable clamping with robust zinc-plated construction and a max clamping force of 2,500 N for reliable fixture holding; order the Horizontal clamp 122 directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 122 — Kukamet horizontal-foot lever clamp, zinc-plated, 2,500 N The Horizontal clamp 122 is a compact lever clamp designed for stable workholding in jigs and fixtures, featuring a horizontal foot mounting and corrosion-resistant zinc plating for workshop use. Horizontal foot mounting Zinc-plated corrosion protection Max clamping force 2,500 N Compact weight 0.49 kg for easy positioning Consistent clamping performance for production workflows The lever design delivers a repeatable clamping force that supports efficient fixture set-up and reduces rework. With a rated clamping force of 2,500 N and a holding force of 2,800 N, the device secures components reliably during machining, assembly or inspection operations. The specified forces translate into predictable contact pressure; this helps maintain part position under lateral loads and contributes to shorter cycle times in batch production. The compact mass and low profile reduce added inertia on moving fixtures while maintaining the required holding capability. Durable materials and stable mounting for workshop environments Constructed from zinc-plated steel, the clamp resists common forms of surface corrosion found in everyday workshop conditions, extending service life and lowering maintenance cycles. The horizontal foot mounting provides a stable, low-profile attachment to fixture plates and tooling boards; this geometry keeps the clamping vector parallel to the workpiece datum and simplifies integration into existing jigs. The lever mechanism is optimised for rapid engagement and release, enabling quick changeovers without compromising clamp rigidity. Practical handling and integration for fixture design The clamp’s compact dimensions and modest weight make it straightforward to position in confined setups or on modular tooling systems. An operating angle of 71° provides favourable leverage for manual actuation while keeping the handle clearance minimal, useful where adjacent clamps or gauges are present. As a simple, mechanical workholding element, the unit minimises the need for auxiliary power or controls, supporting lean production principles and reducing points of failure. The familiar lever format ensures easy training and immediate adoption on the shop floor. Contact Metav Werkzeuge for supply and specification assistance on the Kukamet Horizontal clamp 122 — our Emmerich-based team will advise on integration and availability Technical data Article number: 122-3 GTIN: 8680731501094 Manufacturer: Kukamet Facts Max clamping force: 2,500 N Max holding force: 2,800 N Weight: 0.49 kg Operating angle: 71° Special features Material: zinc-plated steel Mounting: horizontal foot Design: lever/hand-actuated clamp FAQ What maximum clamping force does this clamp provide? The clamp provides a maximum clamping force of 2,500 N, giving the Horizontal clamp 122 sufficient holding capacity for many fixture and assembly tasks. Is the clamp suitable for workshop environments prone to humidity? Yes, the zinc-plated finish on the Horizontal clamp 122 offers basic corrosion protection appropriate for general workshop conditions, extending service life compared with untreated steel. How is the clamp mounted to a fixture plate? The clamp uses a horizontal foot mounting that fastens to fixture plates or tooling boards; this arrangement keeps the clamp low-profile and aligned with the workpiece datum. What advantage does the 71° operating angle provide? A 71° lever angle balances handle clearance and mechanical advantage, allowing straightforward manual actuation while maintaining a compact footprint in tight fixture layouts. Who supplies this clamp and where can further advice be obtained? The clamp is supplied by Kukamet and distributed via Metav Werkzeuge; Metav can provide application guidance and delivery information for the Horizontal clamp 122 (SKU 122-3). Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com