Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
750N Vertical Clamp With Safety Lock, Zinc Plated, M5x35 Spindle, 1000N Holding Force - Kukamet
A galvanised vertical clamp with an integrated safety lock and angle base delivers secure, repeatable clamping up to 750 N while keeping fixture weight to just 0.17 kg; ideal where compact, reliable vertical holding is required. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 213 Vertical Clamp — Kukamet galvanised, safety-lock, angle base A 213 Vertical Clamp designed for secure vertical clamping in jigs and fixtures, featuring an angle base and an integrated safety lock for safe, repeatable operation Galvanised corrosion-resistant finish Integrated safety lock mechanism Clamping force up to 750 N Compact 0.17 kg lightweight design Consistent, measurable clamping for reliable production The clamp delivers a defined clamping force of 750 N and a holding force of 1000 N, providing clear, comparable performance figures that aid fixture design and process planning. These numerical values enable rational decision-making: machines and jigs can be specified with predictable load limits, reducing the risk of over- or under‑dimensioning. The screw is sized M5x35, which simplifies replacement and integration with common fixture components. By stating objective metrics, the clamp supports efficient setup and predictable repeatability on the shop floor. Space-saving design that supports flexible fixtures With a galvanised finish and a weight of just 0.17 kg, this vertical clamp suits compact jigs and modular tooling where mass and corrosion resistance matter. The angle base mounting allows secure positioning on plates and frames without extra adapters, so assembly time is shortened and footprint is minimised. The small form factor and standard threaded pressure spindle make the unit suitable for both retrofits and new fixture concepts, helping maintain throughput with minimal impact on existing tooling layouts. Safety-first features and dependable sourcing Built-in safety lock prevents accidental release during machining or handling, lowering the chance of workpiece movement and downstream rework. The clamp is produced under the Kukamet name and supplied via Metav’s European distribution channel, which acts as a quality filter to ensure consistent delivery and traceable stock. This combination of a mechanical safety feature and a reliable supply chain reduces operational risk and supports continuous production. For applications where operator safety and fixture integrity are priorities, this vertical clamping solution offers a pragmatic balance of protection and performance. For expert advice or to secure supply of Kukamet clamping solutions, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored ordering and technical information Technical data SKU: 213-1-L GTIN: 8680731501858 eClass: 21041717 ETIM: EC011973 Facts Clamping force (max): 750 N Holding force (max): 1000 N Weight: 0.17 kg Pressure spindle: M5x35 Special features Material: galvanised Mounting: angle base Safety lock: integrated Arm: not applicable Brand: Kukamet FAQ What maximum clamping force does the clamp provide? The clamp offers a maximum clamping force of 750 N and a holding force of 1000 N, suitable for many light to medium fixture tasks with defined load requirements. Is the unit protected against corrosion? Yes, the clamp is supplied with a galvanised finish for enhanced corrosion resistance in workshop environments. How is the clamp mounted to a fixture plate? Mounting is via an angle base, allowing direct attachment to plates and frames without additional adapters. Does the clamp include a safety mechanism to prevent accidental release? An integrated safety lock is provided to secure the clamping position during machining and handling. Which thread is used for the pressure spindle? The pressure spindle is specified as M5x35, compatible with standard fixture components. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Clamp Toggle Closure Clamp With Hook, 2.2kN Thrust / 3.2kN Hold, Blackened Finish - Kukamet
High holding performance and a compact, hook-equipped design combine to deliver secure, repeatable closures in assembly and fixture applications; the clamp’s horizontal base simplifies integration into production jigs. Order the Kukamet 351 via Metav Werkzeuge or consult the Metav technical team for specification support. Kukamet Hook Latch Toggle Clamp 351 — robust hold with 3,200 N capacity and horizontal base A Kukamet 351 hook latch toggle clamp designed for reliable clamping and closure tasks in workshop and industrial fixtures, featuring a horizontal mounting foot for stable installation. Holding force up to 3,200 N Pressing force up to 2,200 N Horizontal base for stable mounting Blackened finish for wear resistance Reliable clamping performance that reduces rework The latch delivers a high holding force of 3,200 N together with a pressing force of 2,200 N, engineered to secure components under dynamic loads. These figures translate into consistently low slippage and a reduced need for rework in repetitive assembly cycles. For production planners and workshop engineers, the measurable load ratings support process reliability and allow straightforward comparison with alternative clamping solutions. Durable finish and compact design for long service life Constructed with a blackened finish, the clamp resists wear and provides basic corrosion protection while retaining a compact footprint at 0.335 kg. The finish is suited to industrial environments where moderate protection is required without the cost or bulk of plated alternatives. The robust build and lightweight nature support mobile fixtures and jigs, enabling faster handling during set-up and fewer replacements over time. Practical mounting and quick action for efficient workflows The horizontal foot mating allows straightforward integration into flat mounting surfaces and tooling plates, while the integrated hook ensures a positive engagement with the mating part. The combination of stable mounting and quick action closure reduces cycle times when securing panels, lids or moulds. Thread engagement of 75 mm provides adjustment range for compensating tolerances in fixture design, simplifying alignment without additional parts. For dependable clamping in fixtures and closures, select the Kukamet 351 from Metav Werkzeuge — available with direct dispatch from Emmerich; technical advice and order support from Metav’s specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: B351-3 GTIN: 8680731508543 SKU: B351-3 Facts Max pressing force: 2,200 N Max holding force: 3,200 N Weight: 0.335 kg Thread length: 75 mm Special features Mounting: horizontal base Finish: blackened With hook Category: Spanner FAQ What loads can the clamp handle in continuous operation? The Kukamet 351 hook latch toggle clamp is rated with a holding force of 3,200 N and a pressing force of 2,200 N (SKU B351-3), suitable for repetitive fixture use within those limits. Is the clamp suitable for jig and fixture mounting on flat plates? Yes, the horizontal base is designed for secure mounting on flat tooling plates and jigs; the latch clamp from Kukamet offers stable installation and alignment. What adjustment range does the threaded section provide? The threaded engagement has a length of 75 mm, giving sufficient adjustment for compensating workpiece tolerances and positioning in assembly fixtures for the Kukamet 351. How does the finish affect longevity in a workshop environment? The blackened finish on this latch clamp increases surface wear resistance and provides basic corrosion protection, extending service life in standard workshop conditions. Can the latch be used to secure removable panels or transport lids? The hook-equipped toggle latch is suitable for securing removable panels and lids where a positive mechanical engagement and repeatable clamping force are required; refer to the Kukamet 351 specification (SKU B351-3) for load guidance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Clamp With Horizontal Foot, Safety Lock, 2.2kN Press Force, 3.2kN Holding Force, Hook, Blackened - Kukamet
Reliable clamping for production: the combination of a 3,200 N holding force, a 2,200 N closing force and an integrated safety lock provides secure fixture retention and repeatable operation on production jigs. Order the clamp directly via Metav Werkzeuge or request specification advice from our consultants. 351 toggle latch clamp – horizontal base, safety lock (Kukamet) The 351 toggle latch clamp is a compact industrial clamp for horizontal mounting that delivers high holding forces and secure locking for fixtures and jigs. Horizontal base for stable mounting Safety lock prevents accidental release Holding force up to 3,200 N Thread length 75 mm for versatile fixing Reliable, high-force clamping for repeatable fixes The clamp delivers a holding force of 3,200 N and a closing force of 2,200 N, values that translate into confident part retention and reduced movement during machining or assembly. These figures indicate the maximum sustained grip and the actuating force respectively; in practice this means fewer rejects and less rework when used in production fixtures. Built for repetitive cycles, the design reduces setup variation and supports process stability on automated or manual lines. Robust mounting and integrated safety for workshop use A horizontal base simplifies installation on machine tables or fixture plates and ensures a compact, low-profile setup. The mechanism includes a safety lock that prevents unintended release, increasing operator safety and protecting workpieces during transport or vibration-prone processes. The component’s blackened finish gives corrosion resistance in everyday workshop conditions while maintaining a professional appearance suitable for industrial environments. Practical integration and clear technical fitment The clamp features a thread length of 75 mm, enabling flexible attachment and depth adjustment in a wide range of jigs. At 0.335 kg mass and with a compact hook version, the unit is easy to fit where space is limited; the model is supplied as SKU B351-3-L for straightforward ordering. For applications where reliable repeatability is essential, the latch mechanism offers a balance of accessible handling and robust performance, minimising machine downtime and supporting consistent assembly quality. For secure, production-ready clamping with Kukamet quality, contact Metav Werkzeuge in Emmerich for tailored advice and ordering information on the 351 toggle latch clamp Technical Data Article number: B351-3-L GTIN: 8680731508550 Manufacturer: Kukamet Material finish: blackened finish Weight: 0.335 kg Core specifications Closing force (max): 2,200 N Holding force (max): 3,200 N Thread length: 75 mm Weight: 0.335 kg Features and variants Horizontal base mounting With hook Safety lock included Model: 351 Category: Toggle latch clamp FAQ Is this clamp suitable for horizontal mounting? Yes. The 351 toggle latch clamp is designed for horizontal base mounting, making it suitable for machine tables and fixture plates where a low profile is required. What grip and actuation forces are provided? The device offers a holding force of up to 3,200 N and a closing force up to 2,200 N, values that support secure retention and robust actuation for production use. Does the clamp include a safety mechanism? Yes. The clamp includes an integrated safety lock that prevents accidental release and increases operational safety during vibration or handling. Which finish and model should be ordered for a hook version? The hook version is supplied with a blackened finish under model designation 351 and is available as SKU B351-3-L Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Clamping Toggle Clamp Vertical Base, Black Oxide Finish, 2.2kN Closing Force - Kukamet
Take advantage of the combination of compact mounting, high holding capacity and robust finish for reliable fixture work; order the clamp via Metav Werkzeuge or contact our consultants for application advice. Kukamet 332 Closure Toggle Clamp — Vertical-foot lever clamp with hook and 3,200 N holding force The Kukamet 332 is a vertical-foot toggle clamp designed for rapid, secure workpiece holding in fixtures, jigs and assembly stations. Vertical-foot mounting for compact fixtures High holding force: 3,200 N maximum Hook-equipped lever for secure engagement Blackened finish resists surface wear Reliable clamping performance that boosts throughput The Kukamet 332 delivers a holding force of 3,200 N with a clamping force of 2,200 N, values that translate into stable, repeatable retention of components during machining, welding or assembly. The forces cited are measurable specifications and indicate how firmly a workpiece is retained; higher holding force reduces the need for secondary supports, which in turn shortens cycle times and improves process consistency. The lever-operated mechanism is engineered for a positive mechanical lock, so the clamp remains closed under load and is released quickly when the operation is complete. Compact mounting and fast operation for versatile fixtures Fitted with a vertical base and a hook-equipped lever, this clamp is intended for space-conscious fixture layouts where vertical mounting is preferred. The 75 mm thread length allows for fine adjustment of engagement depth, while the low mass of 0.31 kg keeps added inertia to a minimum in moving assemblies. Because the design is lever-driven, actuation is immediate and ergonomic; the clamp can be integrated into manual or semi-automated production cells where repeatable, quick clamping and unclamping reduce operator effort and speed up part handling. Durable finish and straightforward maintenance for workshop longevity A blackened finish provides surface protection that resists everyday wear in workshop environments and gives the clamp a uniform appearance that is tolerant of light surface contamination. The robust lever and hook interface are simple to inspect; any required servicing is limited to routine checks and lubrication of pivot points, which keeps downtime low. The clamp’s construction is suited to standard industrial use in fixtures and jigs, offering a balance of durability and mechanical simplicity that supports long-term reliability. Contact Metav Werkzeuge to discuss how the Kukamet 332’s 3,200 N holding capacity and vertical-foot design can be integrated into existing fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and supply from Emmerich. Technical data Article number: B332-3 GTIN: 8680731508475 ECLASS: 21041718 Specifications Holding force: 3,200 N Clamping force: 2,200 N Thread length: 75 mm Weight: 0.31 kg Features Closure toggle clamp (lever clamp) design Blackened finish With hook Vertical-foot mounting FAQ What maximum holding force does this clamp provide? The Kukamet 332 closure toggle clamp (SKU B332-3) provides a maximum holding force of 3,200 N, which is suitable for secure retention in many fixture and assembly applications. How is the clamp mounted and adjusted? Mounting is via a vertical foot, and adjustment is achieved through the 75 mm thread length, allowing precise setting of the engaging height for the hooked lever. Is the clamp suitable for frequent workshop use? The lever-operated design combined with a blackened finish and robust hook makes the clamp appropriate for regular use in jigs and fixtures; routine lubrication of pivot points is recommended to maintain performance. How heavy and compact is the clamp for integration into fixtures? With a mass of 0.31 kg and a vertical-foot form factor, the clamp is compact and lightweight, which assists integration into space-limited fixture arrangements. Manufacturer: Kukamet Fevzi Çakmak Mah. 10644 Sk. No: 61-63, 42050 Karatay / Konya, Turkey / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Closing Clamp Vertical Base With Hook, 2.2kN Thrust / 3.2kN Hold, Black Oxide Finish - Kukamet
Robust performance and compact design combine in a single clamping solution: a high holding force of 3,200 N, a maximum pressing force of 2,200 N, and a vertical-foot mounting for stable fixture set-ups. Lightweight construction at 0.335 kg and an integrated hook make this clamp suited for repetitive jigs and fast-change operations. Order directly via Metav Werkzeuge or consult Metav’s specialists for application advice and specification checks. Locking Lever Clamp 312 by Kukamet — 3,200 N holding force, vertical base A Locking Lever Clamp 312 engineered for quick, secure fastening in jig and fixture work, combining a vertical foot mounting and integrated hook for repeatable positioning. Vertical base for stable mounting Holding force up to 3,200 N Blackened finish for surface protection Integrated hook for secure latching Dependable clamping that keeps production moving The clamp delivers a decisive mechanical advantage through a lever mechanism, translating operator motion into a holding force of 3,200 N and a maximum pressing force of 2,200 N. This difference between pressing and holding forces means fixtures remain secure under load while the operator benefits from low actuation effort. The compact mass of 0.335 kg supports rapid handling and reduces inertial load on moving jigs. In practice, this results in shorter cycle times and fewer readjustments, which contributes directly to higher throughput and process stability. Designed for straightforward mounting and integration Featuring a vertical base for mounting, the latch clamp is suited to upright fixture plates and vertical jig faces. The supplied thread length of 75 mm provides sufficient engagement depth for common clamping bolts, enabling flexible attachment and precise alignment. An integrated hook facilitates positive latching with mating catches, reducing the need for additional parts. The combination of these design choices simplifies retrofitting into existing tooling and supports modular fixturing strategies in small to medium production runs. Durable finish and predictable behaviour over many cycles A blackened finish provides surface protection and a professional appearance while limiting glare in workshop lighting. The lever mechanism and hook are engineered for repetitive use, with mechanical limits that keep operation predictable and safe under instruction. The clamp’s straightforward mechanical design eases maintenance and replacement planning, allowing workshop managers to specify reliable components without overcomplicating inventory. Where consistency and repeatability are required, this latch is a practical choice for industrial clamping tasks. Contact Metav Werkzeuge for tailored clamp selection, quote requests or technical clarification on the Kukamet locking lever clamp (SKU B312-3) via eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: B312-3 GTIN: 8680731506761 eClass: 21041718 ETIM: EC011973 Facts Weight: 0.335 kg Max pressing force: 2,200 N Max holding force: 3,200 N Thread length: 75 mm Special features Type: Locking lever / toggle latch clamp Mounting: Vertical foot Finish: Blackened Hook: Integrated Brand: Kukamet FAQ What holding and pressing forces does the clamp provide? The clamp offers a holding force of 3,200 N and a maximum pressing force of 2,200 N; these values describe the static retention and actuation pressure respectively for the Kukamet locking lever clamp (SKU B312-3). How is the clamp mounted to a fixture plate? Mounting is via the vertical foot; the clamp’s thread length of 75 mm allows secure bolting to upright plates or vertical faces typically found on jigs and fixtures. Is the finish suitable for workshop environments? The blackened finish resists surface wear and reduces glare, making it appropriate for standard workshop conditions where mechanical protection is required. Can the clamp be used for quick-change tooling and modular fixtures? Yes; the integrated hook and lever action enable rapid latch-and-release cycles, supporting modular fixturing and frequent component changes in production. What is the weight and handling characteristic of the latch? Weighing 0.335 kg, the clamp is lightweight for easy handling while still providing high clamping performance for repetitive operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Closure Clamp Horizontal Base With Safety Lock, Zinc Plated, Hook, Max Hold 3,200N - Kukamet
Combine secure holding, a galvanised finish and a compact horizontal mounting for dependable fixture performance; order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet Toggle Latch Clamp 351-3-L — galvanised, safety lock for horizontal mounting Kukamet 351-3-L is a robust toggle latch clamp designed for horizontal-base installation, offering secure closure and straightforward integration in production jigs and workshop fixtures. Horizontal base mount for stable installation Galvanised corrosion-resistant finish Safety lock for secure clamping Holding force up to 3,200 N Space-saving mounting with reliable corrosion protection The compact design of this toggle latch delivers a small installation footprint while providing a dependable clamping point for fixtures and doors. The galvanised finish protects the mechanism against corrosion in workshop environments, reducing downtime for maintenance and extending service life. With a net weight of 0.335 kg, the unit is easy to position and replace in assemblies where minimal added mass is required. The horizontal mounting arrangement simplifies alignment on flat surfaces and makes the component suitable for repetitive clamping tasks in production cells. Measured forces for secure and predictable clamping Designed for industrial use, the latch provides a defined closing force of 2,200 N and a holding force of 3,200 N, values that enable planners to calculate safety margins and fixture performance. The distinction between closing and holding force is important: closing force refers to the applied actuation force during engagement, while holding force indicates the maximum static load the engaged latch resists. These ratings support rational decisions when specifying clamps for repeatable assembly, welding or transport fixtures where predictable retention is essential. The model designation 351-3-L helps ensure the correct part is selected for such calculations. Built-in assurance: hook engagement and safety lock Operational safety is enhanced by a positive hook engagement and an integrated safety lock, which prevent unintended release under vibration or incidental loads. The mechanical lock engages automatically when the latch is closed, delivering an added layer of protection for secured components. This feature reduces the risk of workpiece movement during machining or handling and contributes to consistent process quality. Simple, tool-accessible locking and unlocking also maintain efficient cycle times on production lines. Straightforward installation and low-maintenance use Installation is tailored to horizontal fixtures, with a thread length of 75 mm allowing flexible fixing depth to match plates and frames. The zinc-treated body requires only minimal upkeep; routine inspection and occasional lubrication of pivot points are sufficient in most industrial settings. The latch’s construction and finish make it a practical choice for workshops and small-batch production alike, where durable, easy-to-fit hardware helps streamline fixture assembly and maintenance routines. Choose the Kukamet 351-3-L toggle latch clamp for robust, low-maintenance clamping; contact Metav Werkzeuge for ordering or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 351-3-L GTIN: 8680731502497 ECLASS: 21041718 ETIM: EC011973 Core technical data Closing force (max): 2,200 N Holding force (max): 3,200 N Thread length: 75 mm Weight: 0.335 kg Materials / Special features Galvanised Horizontal base mounting With hook With safety lock FAQ What load can the latch withstand during static use? The latch resists a holding force of 3,200 N when properly mounted; this value refers to the maximum static load the engaged hook can hold. Is the latch suitable for outdoor or humid environments? The galvanised surface provides corrosion resistance for workshop and moderately humid conditions; harsher atmospheres may require additional protection. How is the latch mounted to a fixture? Mounting is intended for a horizontal base; the 75 mm thread length allows secure fastening through plates and frames to accommodate different material thicknesses. Does the safety lock engage automatically? Yes, the integrated safety lock engages upon closure, preventing accidental release under vibration or incidental impact. Which SKU should be ordered for this configuration? Order the 351-3-L SKU for the galvanised toggle latch with hook and safety lock from Kukamet Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Closure Clamp Vertical Base Three-Point Clamp With Hook, Stainless Steel, 2.2kN Thrust - Kukamet
Benefit from robust stainless steel construction and a 3,200 N maximum holding force for dependable clamping in demanding workflows; combine durable materials, compact mounting and a hooked latch for secure transport and fixture applications — order the closure clamp 312 directly via Metav Werkzeuge or ask our consultants if needed. Closure clamp 312 — Stainless steel toggle latch with hook and vertical-foot mounting (Kukamet) A robust closure clamp 312 designed for secure over-centre holding in fixtures, transport attachments and quick-release applications. Stainless steel construction Max holding force 3,200 N Closing force up to 2,200 N Vertical-foot mount with hook Secure clamping performance that reduces rework The design focuses on measurable performance: a max holding force of 3,200 N combined with a closing force of 2,200 N results in dependable retention under dynamic loads. These values translate into fewer loose parts during transport and a lower risk of workpiece displacement in jigs and fixtures. The over‑centre mechanism converts lever motion into a consistent clamping action, ensuring repeatable results and easier process validation when integrative fixtures require documented holding capacities. Compact mounting for flexible integration With a vertical‑foot mounting arrangement and a thread length of 75 mm, the clamp integrates with limited mounting space and standard fixture plates. The compact footprint and hooked latch version allow secure engagement with a variety of mating catches and keepers, simplifying retrofits and reducing fixture redesign. Installation requires only conventional fastenings to the vertical foot, which helps speed up assembly time and minimises downtime during tool changes or maintenance. Corrosion resistance and low maintenance for long service life Constructed from stainless steel, the mechanism provides enhanced corrosion resistance where humidity or light contamination is present. The material choice reduces the need for frequent replacement and supports continuous operation with minimal upkeep, contributing to lower total cost of ownership. For shops aiming to standardise on durable components, this clamp offers a resilient option that aligns with quality‑driven procurement strategies and steady production output. Practical details that support shopfloor efficiency Lightweight at 0.335 kg yet robust in function, the clamp is supplied in the hooked configuration and marked as SKU S312-3, facilitating inventory control and reordering. The latch’s straightforward geometry makes it compatible with common catch plates and mounting patterns, while the stainless construction keeps cleaning and inspection routines simple. Technical documentation and a product sheet are available in the attached catalogue for quick reference during layout planning. For specification checks or procurement advice on Kukamet toggle solutions, contact Metav Werkzeuge for tailored recommendations and reliable supply of the closure clamp 312 (SKU S312-3) via info@metav-werkzeuge.com or by phone — Metav’s specialists will advise on fixture compatibility and delivery options. Technical data Article number: S312-3 GTIN: 8680731509410 Brand: Kukamet Material: Stainless steel Facts Max pressing force: 2,200 N Max holding force: 3,200 N Weight: 0.335 kg Thread length: 75 mm Special features Mounting: Vertical foot Hook: Included ETIM: EC011973 EClass: 21041718 FAQ What load can the clamp handle in industrial fixtures? The closure clamp 312 from Kukamet is specified with a maximum holding force of 3,200 N; the SKU S312-3 is therefore suitable for medium‑duty fixture and transport securing tasks where this retention level is required. Is the clamp suitable for outdoor or humid environments? Yes, the Kukamet closure clamp 312 is made of stainless steel, which provides good corrosion resistance and makes the S312-3 appropriate for environments with occasional moisture or light contamination. How is the clamp mounted to a fixture plate? The clamp uses a vertical‑foot mounting arrangement and a 75 mm thread length, enabling straightforward attachment to standard fixture plates or vertical supports without special adapters. Does the hooked version work with standard catch plates? The hooked latch on the S312-3 is designed for compatibility with common catch plates and keepers; matching the plate geometry ensures secure engagement and repeatable clamping. What maintenance is required to keep the clamp operational? Routine inspection and light lubrication of the pivot points are typically sufficient for the Kukamet closure clamp 312; stainless steel construction minimises corrosion and helps reduce maintenance intervals. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Horizontal Base With Hook, 2.2kN Closing Force, Zinc Plated - Kukamet
Take advantage of the combination of robust holding capacity, corrosion-resistant galvanised steel and a compact horizontal base for secure, space-saving fixture integration; order the closure clamp directly via Metav Werkzeuge or consult our specialists for application advice. Closure clamp 351 — Hooked lever clamp, galvanised (Kukamet) The Closure clamp 351 is a hooked lever clamp designed for reliable securing of covers, panels and fixtures in industrial and workshop applications, mounted via a horizontal base foot for compact installation Galvanised surface for corrosion protection Holding force up to 3,200 N Clamping force up to 2,200 N Horizontal base foot for stable mounting Hooked lever for secure closure Consistent clamping performance that supports production flow The clamp delivers a measurable combination of clamping force and holding force, with a maximum clamping force of 2,200 N and a holding capacity of 3,200 N, which provides clear evidence of its load capabilities. These values allow planners and technicians to match the clamp to specific fixture loads and safety factors; the distinction between the dynamic clamping action and the static holding capacity is explained so that the component can be specified with confidence. The compact mass of 0.335 kg and the thread length 75 mm enable straightforward integration into existing jigs and fixtures while keeping added inertia low. Built for durability in demanding workshop environments A galvanised finish gives the product enhanced resistance to surface corrosion in humid or workshop atmospheres, extending service life where maintenance intervals are short. The combination of a horizontal base foot and a hooked lever creates a low-profile locking solution that resists unintended disengagement while occupying minimal space on a fixture face. Constructed from galvanised steel, the clamp is suitable for repeated actuation and offers predictable mechanical behaviour over many cycles, helping to reduce downtime and spare-part logistics in serial production. Fast fitting and low-maintenance integration for fixture designers Mounting is simplified by the horizontal foot arrangement, which permits a flush attachment to layouts where vertical clearance is limited; the hooked closure requires only basic alignment and the specified thread length of 75 mm for adjustments. Lightweight and compact, the device is easy to handle during assembly and replacement, cutting installation time on the shop floor. Routine inspection is limited to visual checks of the galvanised surface and the hook engagement; lubrication or adjustment can be performed without specialised tools, supporting uninterrupted operation in high-throughput environments. For a robust, galvanised clamping solution from Kukamet, contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will assist with suitability and ordering Technical data Article number: 351-3 SKU: 351-3 GTIN: 8680731502480 Facts Weight: 0.335 kg Clamping force (max): 2,200 N Holding force (max): 3,200 N Thread length: 75 mm Special features Material: galvanised steel Mounting: horizontal base foot Closure type: hooked lever with hook included eClass: 21041718 ETIM: EC011973 Category: clamps FAQ What maximum load can this clamp hold? The clamp provides a holding force of up to 3,200 N; the closure action offers a clamping force of up to 2,200 N, values suitable for many fixture and panel applications using the Closure clamp 351. Is the finish suitable for humid workshop conditions? Yes, the galvanised surface of the Closure clamp 351 offers corrosion protection appropriate for workshop and industrial environments, reducing the need for frequent replacement. How is the clamp mounted to a fixture? The unit is designed for mounting via a horizontal base foot; the supplied thread length of 75 mm allows adjustment and straightforward attachment to plates or frames. Can the clamp be used for serial production jigs? Its compact design, predictable force ratings and galvanised construction make the clamp well suited to repetitive use in jigs and fixtures for serial production. What maintenance is required? Maintenance is minimal: periodic visual inspections of hook engagement and the galvanised finish are normally sufficient, with lubrication or minor adjustment possible without specialised tools. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Horizontal Base With Hook, 2.2kN Thrust, 3.2kN Hold, Black Oxide Finish - Kukamet
The combination of a robust blackened finish, a 2,200 N clamping force and a compact 0.31 kg construction delivers dependable, repeatable holding for jigs and fixtures; order the clamp directly via Metav Werkzeuge or consult the specialists if required. Toggle Latch Clamp 331 — Hook type, 2,200 N clamping force (Kukamet) A practical Toggle Latch Clamp 331 for horizontal-base fixtures, engineered to secure components rapidly and reliably in repetitive production and assembly tasks. Compact design, 0.31 kg Powerful clamping force 2,200 N Hooked toggle for secure closure Consistent clamping performance for series work This latch offers 2,200 N of clamping force and a 3,200 N holding capacity, values that ensure stable retention during machining, welding or assembly operations. The mechanical advantage of the toggle mechanism provides a secure closure with minimal operator effort, reducing setup time and the risk of part movement. For process planning, the clearly stated forces create a verifiable basis for selecting the right clamp for repetitive production runs, improving throughput and lowering scrap rates. Space-saving mounting with adjustable engagement Designed for a horizontal base mounting, the unit takes up little space on fixtures while delivering strong contact pressure. At only 0.31 kg, the clamp minimises added mass on moving jigs and is easier to position during assembly. The 75 mm thread length allows flexible adjustment of the hooked arm for varied part heights, while the hooked latch simplifies engagement with mating catches. The blackened finish provides basic surface protection and a professional appearance suitable for workshop environments. Rapid integration and low maintenance for everyday use The latch clamp is optimised for frequent open–close cycles where reliability matters. The toggle design translates operator motion into a positive locking action, enabling fast clamping and unclamping with consistent results. Its compact construction and standardised thread make incorporation into custom fixtures straightforward, and the simple mechanical layout keeps maintenance low: periodic inspection and lubrication are normally sufficient to preserve performance. This makes the component a pragmatic choice for engineering shops and production lines seeking durable, user-friendly workholding. Secure reliable fixturing with the Kukamet 331 — contact Metav Werkzeuge for supply and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: B331-3 GTIN: 8680731508420 Model: 331 Facts Clamping force: 2,200 N Holding capacity: 3,200 N Weight: 0.31 kg Thread length: 75 mm Mounting: horizontal base eClass: 21041718 ETIM: EC011973 Special features Hooked latch Finish: blackened Category: Clamps Material indication: blackened/brüned surface FAQ What clamping force does this latch provide? The latch delivers a clamping force of 2,200 N and a holding capacity of 3,200 N, suitable for many light to medium-duty fixturing tasks with the Kukamet Toggle Latch Clamp 331 (SKU B331-3). Can the hooked arm be adjusted for different part heights? Yes, the hooked arm uses a threaded engagement with a 75 mm thread length, allowing adjustment to suit varying workpiece heights and ensuring secure closure. Is this clamp suitable for frequent cycle use in production? The toggle mechanism and robust construction are designed for repetitive use; the clamp provides rapid locking and low maintenance, making it appropriate for series assembly and jigs. How is the clamp mounted to a fixture? The unit is intended for a horizontal base mounting and can be fastened to jigs or plates using the standard mounting pattern; its compact footprint supports space-efficient fixture design. What surface protection is applied to the clamp? The component features a blackened finish, offering basic corrosion resistance and a professional appearance suitable for workshop and production environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Horizontal Base With Safety Lock, Stainless Steel, 2.2kN Thrust, Hook - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines high clamping and holding forces with a secure safety lock for reliable fixture performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Toggle latch clamp 351 (S351-3-L) — Stainless-steel horizontal-base clamp with safety lock by Kukamet A Toggle latch clamp 351 engineered for secure, repeatable clamping in industrial fixtures, featuring a horizontal mounting foot and integrated safety lock for vibration-prone environments Stainless-steel construction Safety locking mechanism Horizontal mounting foot High clamping force 2,200 N Secure holding where production tolerances matter The S351-3-L offers a dependable combination of 2,200 N clamping force and a maximum 3,200 N holding force, making it suitable for medium-duty fixturing where consistent contact pressure is essential. The clamp’s mechanism converts a short handle travel into a substantial axial force, providing repeatable results across batches. This mechanical advantage reduces the need for readjustment and supports smoother downstream processes by keeping components aligned during machining or assembly. Designed for safe, vibration-resistant operation A distinct benefit of this model is the integrated safety lock, which prevents unintentional opening under vibration or impact. Paired with the horizontal base mounting, the latch ensures secure engagement in jigs, conveyors and fixture plates. The locking feature simplifies workplace safety planning by providing a positive retention state; this reduces the risk of sudden release during handling and contributes to a lower incidence of scrap or rework in production runs. Fast installation and durable materials for long service life Constructed from stainless steel, the clamp resists corrosion in workshop environments and tolerates regular cleaning cycles without loss of function. Installation is straightforward: the clamp is secured via its horizontal mounting foot and the thread 75 mm accepts standard fasteners for rigid attachment. At a mass of 0.335 kg, the unit is light enough for retrofitting yet robust enough to deliver sustained performance, reducing the frequency of replacement and maintenance interventions. Practical advantages for workshop and industrial use As a toggle latch with hook and safety features, this model streamlines both manual and semi-automated handling operations by delivering precise engagement with minimal operator effort. The product’s mechanical design emphasises holding force and repeatability rather than electronic controls, which simplifies integration into existing fixtures and lowers lifecycle complexity. For manufacturers seeking cost-effective clamping that prioritises durability and consistent results, this clamp offers measurable operational benefits. Choose Kukamet quality for dependable fixture security — contact Metav Werkzeuge in Emmerich for product guidance and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S351-3-L GTIN: 8680731506754 SKU: S351-3-L Manufacturer: Kukamet Numbers Max clamping force: 2,200 N Max holding force: 3,200 N Thread length: 75 mm Weight: 0.335 kg Special features Material: stainless steel Mounting: horizontal base Safety lock included With hook FAQ What is the maximum clamping force of this clamp? The maximum clamping force is 2,200 N for the Kukamet toggle latch clamp S351-3-L. Can the clamp remain locked during vibration or transport? Yes, the integrated safety lock on the S351-3-L prevents unintended release, ensuring secure retention under vibration. Is the clamp suitable for corrosive workshop environments? Made from stainless steel, the toggle latch clamp is designed to resist corrosion and tolerate routine cleaning. How is the clamp mounted to a fixture plate? The clamp uses a horizontal mounting foot and a threaded attachment (thread length 75 mm) for secure fastening to fixture plates. Does the product include a hook for engagement? This Kukamet model is supplied with a hook for positive engagement in latching applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Vertical Base With Hook, 2.2kN Thrust, 3.2kN Holding, Zinc Plated - Kukamet
Reliable workholding and corrosion resistance make for consistent jig performance; the combination of 2.2 kN clamping force and a zinc-plated finish ensures secure, long-lasting operation. Order the toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Toggle clamp 312 by Kukamet — vertical-base, zinc-plated hook model The Toggle clamp 312 is a vertical-base lever clamp designed for secure workholding in jigs, fixtures and production tooling. Vertical base for compact fixture integration Zinc-plated for corrosion resistance 2.2 kN clamping force, 3.2 kN holding power Integrated hook for fast engagement Dependable force where it matters The clamp delivers a 2.2 kN clamping force with a 3.2 kN holding power, providing measurable and repeatable results for assembly and machining operations. This level of force reduces slippage and maintains component position under load, so setups stay stable throughout the production cycle. The lever action converts operator motion into consistent clamping pressure, reducing setup time and increasing throughput in batch production or fixture work. Built to resist wear and fit tight spaces The zinc-plated surface protects against corrosion in workshop environments, extending service life without compromising mechanical function. The vertical-base design allows installation on narrow or densely populated fixture plates where horizontal mounts would not fit, enabling compact tool layouts and simpler fixture design. With a low mass of 0.335 kg and a short mounting footprint, the clamp integrates cleanly into existing jigs while maintaining robustness for daily industrial use. Practical features for faster operation Equipped with an integrated hook and a 75 mm thread length, the lever clamp offers quick engagement and straightforward height adjustment for a range of workpiece profiles. The hook version simplifies temporary holding and makes repetitive operations more efficient, while the threaded spindle permits fine tuning of contact height without additional shims. These practical details support a faster changeover and more ergonomic handling for operators on the shop floor. For reliable clamping from Kukamet and expert procurement support, contact Metav Werkzeuge — consult our Emmerich team for specification matching and secure supply to your workshop Technical Data Article number / SKU: 312-3 GTIN: 8680731502367 Manufacturer: Kukamet Material: Zinc-plated Mounting type: Vertical base Hook: Yes ECLASS: 21041718 ETIM: EC011973 Facts Max clamping force: 2200 N Max holding force: 3200 N Thread length: 75 mm Weight: 0.335 kg Special features Vertical base mounting Integrated hook for engagement Zinc-plated finish Lever-operated mechanism FAQ What is the maximum clamping and holding force of the clamp? The Kukamet toggle clamp 312 provides a maximum clamping force of 2.2 kN and a holding power of 3.2 kN, suitable for many workshop fixtures. Can the clamp be mounted on narrow fixture plates? Yes, the vertical-base configuration of this lever clamp is designed for compact fixture integration and tight installation spaces. Is the surface protected against corrosion? The clamp is zinc-plated, offering corrosion resistance appropriate for standard workshop and production environments. How is the clamping height adjusted? Height adjustment is achieved via the threaded spindle (75 mm thread length) and hook arrangement, enabling fine tuning of contact height without additional parts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Vertical Base With Safety Lock, 2.2kN Thrust / 3.2kN Hold - Kukamet
Take advantage of the combination of secure holding, compact vertical mounting and effortless repeatability for reliable clamping in production or workshop jigs. The integrated safety lock and robust mechanical design ensure secure engagement under load; order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. B312-3-L Latch Clamp (Toggle latch clamp) – Vertical base, safety lock (Kukamet) The B312-3-L latch clamp is a compact toggle latch clamp engineered for secure fastening of panels, fixtures and jigs, featuring a vertical mounting foot and an integrated safety lock for repeatable operation. Vertical base for compact mounting Built-in safety lock Hook included for secure engagement Holding force 3,200 N Consistent clamping performance for production use The clamp delivers a measurable clamping force of 2,200 N and a holding force of 3,200 N, values that support consistent fixture retention in repetitive workflows. Such quantifiable performance enables planners and production engineers to define safety factors and cycle procedures with confidence. The toggle mechanism converts operator input into high retention force, reducing slippage during handling and machining. Where predictable results are required, the mechanical advantage of this design minimises variations between operators and cycles, improving overall process reliability. Built-in safety features that protect assemblies Safety and secure engagement are prioritised by the integrated safety lock and the supplied hook which prevents accidental release under vibration or incidental contact. The latch incorporates a vertical-foot mounting arrangement that keeps the clamping plane compact, making it suitable for tight fixtures and assembly stations. The safety lock provides a tactile locking position so operators can verify engagement quickly; this reduces the risk of unsecured parts and supports safer machine loading and transport. Easy adjustment and integration into fixtures Adjustment is straightforward thanks to the thread length of 75 mm, which allows fine tuning of the engagement point and clamping travel without additional adaptors. The clamp’s modest mass and compact footprint make it simple to incorporate into existing jig plates or bespoke fixtures. The blackened surface finish offers a degree of corrosion resistance and a subdued appearance that blends with workshop tooling. For designers, the simple geometry and hook attachment permit rapid iteration of fixture layouts while keeping component count low. Durable construction for low-maintenance operation Manufactured with a focus on practical longevity, the clamp’s materials and finishes are selected to give long service life in workshop conditions. The mechanical toggle principle avoids electronic components, so there is no need for calibration or batteries; maintenance is limited to routine inspection and lubrication of pivot points. This straightforward construction reduces downtime and total cost of ownership in applications where reliable, repetitive clamping is required. Contact Metav Werkzeuge today to discuss how the Kukamet B312-3-L latch clamp can be specified for fixtures and jigs, or request tailored advice from our technical consultants at Metav Werkzeuge. Technical data Article number: B312-3-L GTIN: 8680731508345 SKU: B312-3-L Facts Max clamping force: 2,200 N Max holding force: 3,200 N Thread length: 75 mm Weight: 0.335 kg eClass: 21041718 ETIM: EC011973 Special features Material / finish: blackened finish Mounting: vertical base Includes hook With safety lock Category: Clamps FAQ What maximum holding and clamping forces does this latch provide? The Kukamet latch clamp B312-3-L offers a clamping force of 2,200 N and a holding force of 3,200 N, providing measurable retention for fixture applications. Is the clamp suitable for compact or tight fixture layouts? Yes, the vertical base design and compact footprint of the B312-3-L make it well suited to tight jigs and compact assembly fixtures. How is the engagement adjusted? Adjustment is achieved via the threaded engagement (thread length 75 mm), allowing precise setting of clamping travel without additional parts. Does the clamp include a means to prevent accidental release? The latch clamp is fitted with an integrated safety lock and a hook for secure engagement, reducing the chance of unintended opening under vibration. What maintenance is required for reliable operation? Routine inspection and occasional lubrication of pivot points are typically sufficient; the mechanical toggle design avoids electronics and simplifies upkeep. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Vertical Base With Safety Lock, 2.2kN Thrust, Zinc Plated Hook, 3.2kN Hold - Kukamet
Take advantage of a compact, corrosion-resistant latch clamp that combines robust holding force, a safety lock and a space-saving vertical mounting foot for reliable fixture closure — order the component directly via Metav Werkzeuge or consult our specialists for application advice. 312 Latch Clamp — Vertical-foot closure clamp with safety lock (Kukamet) The 312 latch clamp is a vertical-foot closure device designed for securing panels and fixtures in production and assembly environments, combining a compact footprint with a positive safety lock and a hook for fast engagement. Vertical-foot mounting Integrated safety lock Zinc-plated corrosion protection 2,200 N clamping force Reliable closure that protects the process The closure offers a consistent clamping action thanks to its lever-based mechanism, delivering a 2,200 N clamping force that secures workpieces without deformation. This level of force is suitable for repeatable fixture tasks where secure contact is essential; the distinct difference between the clamping and holding figures means the device both closes and retains assemblies under load. The safety lock adds a mechanical safeguard against accidental release, increasing operational safety in automated or manual workflows. Compact mounting with fast engagement Designed with a vertical foot for space-efficient installation, the clamp mounts vertically on tooling plates or frames and keeps the working area clear. The integrated hook and a thread length of 75 mm enable simple adjustment and rapid engagement, reducing setup times. At just 0.335 kg, the unit minimises added mass on moving fixtures while remaining robust enough for industrial use. Corrosion resistance and dependable materials Constructed with a zinc-plated finish, the clamp resists surface corrosion in typical workshop atmospheres, extending service life and reducing maintenance intervals. The device’s 3,200 N holding capacity provides a safety margin for dynamic forces that occur during machining or transport. For operators unfamiliar with these terms: clamping force refers to the active closing pressure, while holding force describes the maximum load that the closed clamp can resist without slipping. Practical benefits for workshop and production As a lever-style closure clamp, this model simplifies fixture design and shortens cycle times by enabling quick manual or pneumatic actuation. The mechanical safety lock supports compliance with shop-floor safety routines, and the zinc plating lowers lifecycle costs by decreasing corrosion-related replacements. The combination of compact form, reliable locking and measurable force ratings supports predictable, repeatable production results. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 312 latch clamp (SKU 312-3-L) into existing fixtures and to arrange fast dispatch from our Emmerich warehouse Technical data Article number: 312-3-L GTIN: 8680731502374 Manufacturer: Kukamet Facts Clamping force (max): 2,200 N Holding force (max): 3,200 N Weight: 0.335 kg Thread length: 75 mm Materials & features Material: zinc-plated Mounting: vertical foot Hook: yes Safety lock: yes Category: Clamps FAQ What clamping capacity does this latch clamp provide? The 312 latch clamp provides a maximum clamping force of 2,200 N and a holding capability of up to 3,200 N, suitable for secure fixture closing and retention. Is the clamp suitable for harsh workshop conditions? The zinc-plated finish on the Kukamet 312 offers corrosion resistance appropriate for standard workshop atmospheres and reduces the need for frequent replacements. How is the clamp mounted? Mounting is performed via a vertical foot, allowing compact installation on plates or frames; the unit includes a threaded adjustment with a 75 mm thread length. Does the clamp include a hook and a locking function? Yes, the closure clamp features an integrated hook and a mechanical safety lock for secure engagement and protection against unintended release. What is the weight of the unit and how does it affect fixtures? At 0.335 kg the clamp adds minimal mass to moving fixtures while remaining sturdy enough for repeated industrial use. Which SKU should be ordered for this model? Order the unit under SKU 312-3-L; the product is listed as the Kukamet 312 latch clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Vertical Foot With Hook, 2.2kN Thrust, 3.2kN Holding, Stainless Steel - Kukamet
Combining stainless steel construction with a compact 0.31 kg body and a holding force of 3,200 N ensures reliable, corrosion-resistant clamping and long-term fixture stability. Order the clamp directly via Metav Werkzeuge or ask the consultants for application-specific advice. Toggle latch clamp 332 — vertical-foot lever clamp in stainless steel with hook and high holding force Toggle latch clamp 332 is a robust closure clamp designed for secure fixture locking and fast engagement in industrial and workshop environments Stainless steel construction Holding force 3,200 N Vertical-foot mounting option Integrated hook for quick engagement Consistent, measurable clamping performance for production use The clamp delivers a clear performance profile: a clamping force of 2,200 N during operation and a holding force of 3,200 N once engaged. The distinction is important: clamping force refers to the active force applied to create the closure, while holding force indicates the sustained resistance to part movement after locking. Such quantifiable values support predictable cycle times and repeatable results on jigs and fixtures, making this clamp suitable for assembly lines where component stability under load is critical. The stainless build keeps mechanical performance consistent under regular use. Space-saving mount that simplifies fixture design A vertical-foot mounting reduces the clamp’s footprint on the tooling surface and enables low-profile installations in confined spaces. With a thread length of 75 mm and a net mass of 0.31 kg, the unit is compact yet sturdy, allowing for straightforward integration into existing fixtures without heavy countermeasures. Short setup times are achieved thanks to the vertical base and standardised thread, which together facilitate rapid alignment and secure fastening on plates or rails. Corrosion resistance and quick-engage hook for demanding environments Constructed from stainless steel, the clamp resists rust and maintains surface integrity where humidity or coolants are present. The integrated hook provides an immediate mechanical engagement that reduces the risk of accidental release and speeds up manual or semi-automatic closing operations. This material choice lowers long-term maintenance requirements and supports applications in workshops, food-adjacent production zones or outdoor assemblies where exposure could otherwise degrade components. Designed to improve workflow and reduce setup interruptions The latch mechanism is tuned to provide firm locking with minimal overtravel, decreasing rework and the need for frequent retorquing. Compatibility with standard fixture dimensions and the clamp’s robust holding characteristics mean fewer clamps are needed to secure a workpiece, simplifying inventory and lowering changeover complexity. Where repeat accuracy matters—such as in welding jigs or inspection fixtures—this clamp promotes steady throughput and reduced downtime while supporting safer handling procedures. For robust, corrosion-resistant clamping from Kukamet, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S332-3 GTIN: 8680731509526 Manufacturer: Kukamet Facts Weight: 0.31 kg Thread length: 75 mm Clamping force (max): 2,200 N Holding force (max): 3,200 N eCl@ss: 21041718 ETIM: EC011973 Special features Material: stainless steel Vertical-foot mounting (senkrechter Fuß) With hook (integrated hook for engagement) Category: Spanner FAQ What is the difference between clamping force and holding force? Clamping force is the active force applied during engagement, while holding force is the sustained resistance once locked; the Toggle latch clamp 332 lists 2,200 N clamping and 3,200 N holding force for predictable fixture behaviour. Is the clamp suitable for corrosive or humid environments? Yes, the stainless steel construction of the latch clamp 332 provides corrosion resistance and reduced maintenance in damp or coolant-exposed workshop settings. How is the clamp mounted to a fixture? The clamp uses a vertical-foot mounting arrangement; the 75 mm thread length allows for standardised installation into plates or rails with secure fastening. Can the clamp be used for automated processes? The robust holding characteristics and repeatable engagement make the clamp appropriate for semi-automated jig operations; check the mechanical interface and stroke requirements against your automation setup. Which SKU should be ordered for this model? Order the unit under SKU S332-3; this identifier corresponds to the stainless steel toggle latch clamp with hook and the performance data listed above. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp With Hook, Vertical Mount, 2.2kN Thrust, 3.2kN Holding, Zinc Plated - Kukamet
Take advantage of the combination of high holding force, corrosion-resistant finish and compact vertical-foot design for reliable, repeatable clamping in production and workshop assemblies. Order the clamp directly via Metav Werkzeuge or consult our team for specification support. 332 Toggle Latch Clamp with Hook – Vertical Foot, Zinc-Plated (Kukamet) A 332 toggle latch clamp engineered for secure closure and rapid engagement in jigs, fixtures and workshop assemblies. Zinc-plated steel construction Vertical-foot mounting for compact setups Integrated hook for secure latching Holds up to 3,200 N of retention force Secure retention for demanding closures The clamp delivers a holding force of 3,200 N and a closing force of 2,200 N, giving measurable assurance that components remain fixed under load. These two figures describe different functions: the closing force is the mechanical input generated when the lever is actuated, while the holding force is the sustained retention available once the hook is engaged. This distinction matters for engineers specifying fixtures where dynamic or vibration loads occur, as the high holding force reduces the risk of unintended release and supports consistent machining, welding or assembly operations. Space-saving mounting with adjustable installation Designed with a vertical-foot mounting, the mechanism occupies minimal horizontal space, making it suitable for tight fixture arrangements and stacked assemblies. The thread length 75 mm allows for adjustability during installation, so alignment can be fine-tuned without custom adapters. At only 0.31 kg, the unit adds negligible mass to moving subassemblies, which benefits automated or hand-guided systems where inertia and balance are considerations. Durable finish for workshop conditions The zinc-plated finish enhances resistance to corrosion in workshop and light industrial atmospheres, extending service life compared with bare steel. Zinc plating provides a sacrificial barrier that retards rust formation and eases maintenance cycles; it is therefore a practical choice where regular exposure to coolant mist, oil or humidity is expected but stainless steel is not required. The protective layer also supports reliable repeatability in clamping performance over time. Fast engagement and dependable levers Equipped with an integrated hook and lever-style toggle action, the design enables quick, one-handed engagement and a clear mechanical lock when closed. The toggle mechanism converts manual input into substantial holding capacity while maintaining a compact user stroke, which speeds up repetitive operations and improves ergonomics on the shop floor. This combination of rapid actuation and robust retention makes the clamp well suited for production fixtures, transport locks and repeatable assembly processes. For reliable closures in fixtures and jigs choose the Kukamet 332 toggle latch clamp — contact Metav Werkzeuge in Emmerich for specification advice or to request order details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 332-3 GTIN: 8680731506051 Weight: 0.31 kg Material: Zinc-plated Mounting: Vertical foot With hook: Yes Facts Closing force max: 2,200 N Holding force max: 3,200 N Thread length: 75 mm Special features Lever-type toggle mechanism Compact vertical-foot design Integrated hook for secure latching Suitable for jig, fixture and assembly applications FAQ What holding and closing forces are specified for this clamp? The Kukamet 332 toggle latch clamp provides a holding force of 3,200 N and a closing force of 2,200 N, figures intended for specifying retention and actuation effort in fixtures. Is the finish suitable for workshop environments? The zinc-plated surface on the 332 clamp offers enhanced corrosion resistance for typical workshop and light industrial conditions, extending service life compared with untreated steel. How is the clamp mounted and adjusted? Mounting is via a vertical foot; the clamp features a thread length of 75 mm to facilitate alignment and adjustment during installation. Can the clamp be used for quick-release or repetitive operations? Yes — the lever-type toggle action combined with the integrated hook enables fast, repeatable engagement ideal for quick-release fixtures and high-cycle assembly tasks. Which SKU should be referenced when ordering? Reference SKU 332-3 for this toggle latch clamp when enquiring about the Kukamet model. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7kg Horizontal Base Quick-Action Toggle Clamp, Screw Clamp Style, 1000N Thrust / 2500N Holding - Kukamet
The robust combination of galvanised construction, a horizontal foot for secure mounting and a 2,500 N holding force ensures stable, repeatable clamping in production and workshop environments. Order the quick clamp directly via Metav Werkzeuge or consult our specialists for specification support. Kukamet 811 Quick Clamp — galvanised lever clamp with horizontal foot and 2,500 N holding force The Kukamet 811 Quick Clamp is a lever-operated clamping solution designed for industrial fixturing and heavy-duty workshop applications, offering reliable holding capacity and corrosion-resistant construction. Galvanised steel construction for corrosion resistance Horizontal foot mounting for secure bench attachment 2,500 N maximum holding force for heavy fixtures 1,000 N clamping force for reliable pressure Robust 7 kg body for stable clamping Durable construction for long service life The clamp is built from galvanised steel, providing corrosion protection where wet or variable environments occur; this surface finish reduces maintenance intervals and extends component lifetime. The heavy-bodied design contributes to stable clamping, minimising vibration during machining or assembly. With a focus on robustness rather than lightweight convenience, this tool suits benches and jigs where permanence and strength are priorities. Consistent performance and measurable holding power Engineered for repeatable results, the device delivers a holding force of 2,500 N and a clamping force of 1,000 N, values that support securing medium to heavy workpieces without slipping. These numerical specifications enable planners and engineers to assess suitability for specific setups and calculate safety margins. Where repeatability is required across multiple cycles, the lever mechanism gives consistent clamp pressure with straightforward visual verification. Practical mounting and ergonomic operation A horizontal foot attachment provides a low-profile mounting option that integrates easily into fixture plates and workbenches, keeping the clamp body clear of overhead interference. The lever-operated action allows rapid engagement and release, reducing cycle times in repetitive tasks. Because the unit is supplied as a self-contained clamp, installation involves simple bolting to the work surface and immediate commissioning for production use. Typical applications and compatibility Designed for general workshop and industrial fixturing, the clamp is suitable for use in assembly jigs, test rigs and fixture systems where a dependable quick-action hold is needed. The screw-clamp style configuration gives compatibility with screw-jawed fixtures and standard bench arrangements. Its sturdy mass and mounting method make it a practical choice for permanent or semi-permanent setups that demand continuous, reliable clamping. Speak to Metav Werkzeuge about specifying the Kukamet 811 Quick Clamp for robust, repeatable fixturing — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data SKU: 811-1 GTIN: 8680731504224 eClass: 21020701 ETIM: EC011973 Facts Weight: 7 kg Maximum holding force: 2,500 N Maximum clamping force: 1,000 N Special features Material: galvanised steel Mounting: horizontal foot Clamp type: screw-clamp style / lever-operated Category: quick clamp / lever clamp FAQ What maximum holding force does the clamp provide? The Kukamet 811 Quick Clamp provides a maximum holding force of 2,500 N, suitable for medium to heavy workpieces in fixture applications. Is the clamp suitable for use in humid or corrosive environments? Yes, the galvanised steel construction of the Kukamet 811 offers enhanced corrosion resistance for use in environments with elevated humidity or occasional exposure to moisture. How is the unit mounted to a workbench or fixture plate? The clamp mounts via a horizontal foot that is bolted to the workbench or fixture plate, providing a low-profile and secure attachment. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800 N Push Rod Clamp, Vertical Foot, Zinc Plated, 35 mm Spindle M5x35, 970 N Holding Force - Kukamet
Take advantage of the combination of robust holding force, compact construction and corrosion‑resistant finish to keep fixtures accurate and production moving. Order the clamp directly via Metav Werkzeuge or ask the consultants for tailored delivery from the Emmerich warehouse. Schubstangenspanner 512 — Kukamet push‑rod clamp with vertical base and zinc‑plated finish The Schubstangenspanner 512 is a compact push‑rod clamp suited to fixtures and jigs where secure, repeatable holding is required Zinc-plated for corrosion resistance Vertical base for bench mounting Max holding force 970 N Lightweight 0.135 kg for compact fixtures Consistent clamping and dependable force for production The clamp provides a reliable holding force of 970 N and a maximum clamping force of 800 N, values that ensure repeatable results in batch production and manual assembly tasks. The integrated M5x35 pressure spindle allows fine adjustment of contact pressure, reducing set‑up time and the need for constant re‑adjustment. Because the unit is zinc‑plated, surface protection against corrosion is improved, which prolongs service life in mixed workshop environments and maintains clamping performance over time. Space‑saving mounting that simplifies fixture design A vertical base configuration enables direct bench or fixture mounting without complex adaptors, saving assembly height and simplifying layout. The compact form factor and a mass of 0.135 kg make the clamp easy to integrate into existing jigs where weight and footprint matter. For manufacturing cells that require frequent reconfiguration, the combination of small size and robust fixation contributes to faster changeovers and more efficient use of workbench space. Low‑maintenance construction for continuous operation The zinc‑plated finish reduces the need for intensive upkeep and keeps the contact surfaces protected under typical workshop conditions. The solid construction supports long service intervals and predictable performance, so downtime for repairs or replacements is minimised. Supplied through Metav Werkzeuge, the product benefits from a dependable logistics chain and quality control that supports consistent availability for both small businesses and larger industrial customers. Contact Metav Werkzeuge in Emmerich for a precise supply recommendation and to secure the Kukamet 512 push‑rod clamp for immediate dispatch — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: 512-1 GTIN: 8680731502657 Manufacturer: Kukamet Facts Max clamping force: 800 N Max holding force: 970 N Pressure spindle: M5x35 Weight: 0.135 kg eCl@ss: 21041716 ETIM: EC011973 Special features Push‑rod clamp design Vertical base mounting Zinc‑plated finish Compact, lightweight construction FAQ What materials is this clamp suitable for? The Kukamet 512 push‑rod clamp is designed as a general‑purpose clamping device for fixtures and jigs; its zinc‑plated finish makes it suitable for typical workshop materials and indoor environments. How is the clamp fixed to a workbench or fixture? Mounting is via the vertical base; the vertical base allows direct attachment to benches and fixture plates for a secure installation of the Kukamet 512 (SKU 512-1). Can the clamping pressure be adjusted? Yes, the clamp uses an M5x35 pressure spindle to fine‑tune the contact pressure, enabling accurate setting of the required clamping force for consistent results. Is the clamp corrosion resistant? The zinc‑plated surface provides corrosion protection appropriate for standard workshop use, helping to maintain performance and reduce maintenance needs. What holding and clamping forces can be expected in daily use? Typical performance figures are 970 N holding force and 800 N maximum clamping force, values that support repeatable clamping in assembly and fixture applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800 N Pushrod Clamp Without Base, M5x35 Actuating Spindle, Stainless Steel - Kukamet
Reliable stainless steel push‑rod clamp combining compact form and high holding performance; the robust construction and M5x35 pressure spindle ensure secure, repeatable fixturing. Order the Kukamet clamp via Metav Werkzeuge or consult our technical advisors for application support. Push‑rod clamp 513 — stainless steel, 970 N holding force (Kukamet) Push‑rod clamp 513 is a compact clamp for precise fixture holding in light to medium‑duty assembly and welding applications Stainless steel construction Holding force up to 970 N M5x35 pressure spindle Compact, foot‑less design High clamping performance in a compact footprint The rod clamp delivers a 970 N holding force with a maximum pressure force of 800 N, offering reliable retention for repeatable assembly tasks. The compact layout reduces occupied space on fixtures and jigs, enabling closer part placement and faster cycle times. The combination of high clamping power and a small envelope supports efficient fixture design and contributes directly to reduced setup time and fewer process interruptions. Engineered for longevity and corrosion resistance Constructed from stainless steel, the clamp resists corrosion and maintains dimensional stability in demanding shop environments. At just 0.095 kg, the device adds minimal mass to fixtures while providing durable performance, which helps prevent premature wear and reduces downtime for replacement. The material choice supports long service life and predictable behaviour under frequent clamping cycles. Flexible mounting for straightforward integration The foot‑less mounting concept allows direct integration into bespoke fixtures or welded assemblies without a separate base, simplifying layout and saving vertical space. The M5x35 pressure spindle offers fine adjustment capability for consistent contact pressure and precise part positioning. The simple mechanical design supports quick installation and low maintenance, making the clamp suitable for repetitive production tasks where reliability is essential. Speak to Metav Werkzeuge in Emmerich for specification advice and reliable supply of the Kukamet push‑rod clamp 513 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S513-1 GTIN: 8680731509670 Manufacturer: Kukamet Core technical data Holding force: 970 N Pressure force: 800 N Weight: 0.095 kg Pressure spindle: M5x35 Special features Material: stainless steel Mounting: without foot (foot‑less design) Product type: push‑rod clamp FAQ What clamping and pressure forces does this clamp provide? The Kukamet push‑rod clamp 513 provides a holding force of 970 N and a maximum pressure force of 800 N for secure part retention. What material is used for the clamp body? The clamp body is made from stainless steel, which ensures corrosion resistance and long operational life for the Kukamet push‑rod clamp 513. How is the clamp mounted in a fixture? Mounting is performed without a foot (foot‑less design), enabling direct integration into fixtures; the clamp uses an M5x35 pressure spindle for adjustment. What applications suit this clamp best? This rod clamp is intended for light to medium‑duty fixturing, assembly and welding operations where compact size and reliable clamping are required. How heavy is the clamp and does it affect fixture balance? The clamp weighs 0.095 kg, adding minimal mass to fixtures while delivering consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800 N Pushrod Clamp, Zinc Plated, M5x35 Actuating Spindle, 970 N Holding Force, Without Base - Kukamet
Combine compact design, reliable corrosion protection and assured clamping performance — with a maximum holding force of 970 N and a pressing force of 800 N for secure fixturing. Order the push‑rod clamp directly via Metav Werkzeuge or consult our specialists for application guidance. Push‑rod clamp 513 — compact zinc‑plated clamp with M5×35 spindle (Kukamet) The Push‑rod clamp 513 is a compact, zinc‑plated clamping element designed for fixture assembly and light to medium‑duty workholding in workshops and production environments Compact push‑rod clamp 513 by Kukamet Zinc‑plated steel for corrosion resistance Max holding force 970 N M5×35 screw spindle, no base required Secure holding with defined forces for reliable fixtures The push‑rod design delivers a clearly defined holding force and pressing force, ensuring components remain stable during assembly and light machining. The difference between the two values is functional: the pressing force of 800 N describes the maximum actuation load applied by the spindle, while the 970 N holding force indicates the clamp’s resistance against displacement once engaged. This separation of values helps planners specify the clamp within fixture load budgets and select suitable drive or actuation components. The compact actuation mechanism allows precise clamping without large levers or housings, supporting repeatable positioning in serial production. Durable finish and compact footprint for long service life A zinc‑plated surface finish provides corrosion resistance and a consistent appearance across multiple units, which is beneficial where parts are exposed to workshop humidity or coolant mist. The lightweight construction (approx. 0.095 kg) and compact geometry reduce added mass in jigs and do not impose excessive load on movable tooling. The combination of a corrosion‑resistant coating and a straightforward mechanical design results in a maintenance‑friendly clamp that minimises downtime and supports long‑term fixture reliability. Easy integration and adjustment in assembly setups Integration is simplified by the M5×35 spindle, which offers fine mechanical adjustment and compatibility with common fastening hardware. The clamp is supplied without a base, permitting direct mounting to fixtures, plates or custom adaptors and allowing flexible orientation in a clamping station. Its compact form factor makes it suitable for confined spaces where larger clamping elements would interfere with part access. For modular jigs and bespoke assembly equipment, this clamp provides defined bite and repeatability while occupying minimal space. Choose the Kukamet push‑rod clamp 513 for compact, corrosion‑resistant workholding and contact Metav Werkzeuge in Emmerich for specification advice and reliable supply. Technical data SKU: 513-1 GTIN: 8680731502701 Material: Zinc‑plated Weight: 0.095 kg Core specifications Max pressing force: 800 N Max holding force: 970 N Spindle: M5×35 eCl@ss: 21041716 ETIM: EC011973 Design & features Clamping type: push‑rod clamp Finish: zinc‑plated Installation: without base/foot Intended use: fixture assembly and workholding FAQ What is the difference between pressing force and holding force? Pressing force is the maximum actuation load (800 N) applied by the clamp’s spindle, while holding force (970 N) denotes the clamp’s resistance to displacement once engaged; both values are provided for the Push‑rod clamp 513 to aid correct fixture design. Can the clamp be mounted directly to a jig plate? Yes. The Push‑rod clamp 513 is supplied without a base, allowing direct mounting to plates or adaptors; the M5×35 spindle supports common fastening options for integration. What material and surface finish does the clamp feature? The clamp is made with a zinc‑plated finish for improved corrosion resistance and consistent service life in workshop environments. Is the spindle standardised and user‑replaceable? The unit uses an M5×35 spindle, a standard screw size that permits service and replacement with common fasteners as required. Which SKU should be referenced when ordering or specifying? Reference SKU 513-1 (Push‑rod clamp 513 by Kukamet) for ordering and documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8000 N Holding Force Horizontal Base Closure Clamp With Hook, Stainless Steel - Kukamet
Take advantage of the combination of robust stainless construction, a high clamping capacity and a compact, easily mounted design for reliable fixture performance; order the clamp directly via Metav Werkzeuge or consult our advisers for installation guidance. Toggle Clamp 371 Light Series – stainless steel toggle clamp with horizontal-foot mounting, 7,000 N clamping force (Kukamet) The Toggle Clamp 371 Light Series is a horizontal-foot latch clamp engineered for light-duty jigs and fixtures where repeatable, secure holding is required. Stainless steel construction for corrosion resistance Horizontal-foot mounting for bench or fixture fixing Max clamping force 7,000 N for reliable securing Integrated hook and 65 mm thread length Dependable clamping power that protects workpieces and processes The compact clamping device offers a 7,000 N maximum clamping force and an 8,000 N maximum holding force, delivering a clear safety margin between active clamping and static retention. These numeric values describe the mechanical capacity: clamping force is the active compressive load applied when the lever is operated, and holding force is the static resistance against separation. Selecting a clamp with this specification reduces slippage and helps maintain machining tolerances, which in turn supports consistent production output and lowers rework rates. The stainless steel body contributes to sustained performance under regular workshop use. Quick fitting and flexible installation for efficient fixtures Designed with a horizontal-foot mounting arrangement, the device installs cleanly on flat plates and fixture bases to create a low-profile clamping point. The 65 mm thread length allows adjustment of the spindle position and compensation for wear, while the integrated hook provides a simple engagement method for rapid operation. At a compact mass of 0.815 kg, the unit keeps jig deadweight low, simplifying handling and enabling easier repositioning during fixture changes. These mechanical features permit modular fixture design and faster setup times on repetitive tasks. Low maintenance and operational reliability for workshop continuity Made from stainless material, the clamp offers inherent corrosion resistance and demands minimal upkeep: periodic inspection and light lubrication at pivot points are typically sufficient to maintain functionality. The sturdy construction and simple kinematics reduce the number of service interventions, supporting longer intervals between repairs and less machine downtime. For production environments seeking predictable repeatability, the result is measurable improvement in throughput and operator confidence, backed by clear, verifiable technical data. Contact Metav Werkzeuge for tailored advice and ordering of the Kukamet Toggle Clamp 371 Light Series (S371-4); our Emmerich-based team can confirm compatibility with existing fixtures and advise on mounting options. Technical Data Article number: S371-4 GTIN: 8680731509267 ECLASS: 21041718 ETIM: EC011973 Facts Max clamping force: 7,000 N Max holding force: 8,000 N Weight: 0.815 kg Thread length: 65 mm Special features Material: Stainless steel Mounting: horizontal foot With hook: Yes Series: 371 Light Series Fastening type: horizontal foot Special feature: None FAQ What is the maximum clamping and holding force of this clamp? The Kukamet Toggle Clamp 371 Light Series provides a maximum clamping force of 7,000 N and a maximum holding force of 8,000 N, values that define its active and static load capacities. Can the clamp be mounted on a workbench or fixture plate? Yes; the clamp uses a horizontal-foot mounting arrangement suitable for secure attachment to bench tops and fixture bases, and the 65 mm threaded spindle allows for height adjustment. Is the material suitable for humid workshop environments? The clamp is manufactured from stainless steel, which offers good corrosion resistance for humid or workshop conditions, though specific environmental exposure should be evaluated for extreme settings. What is the purpose of the integrated hook? The integrated hook provides a simple and reliable engagement point for the clamping spindle, enabling fast closure and positive retention in repetitive operations. How heavy is the unit and which series does it belong to? The device weighs 0.815 kg and is part of the 371 Light Series, sold under SKU S371-4 by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8000N Horizontal Base Toggle Clamp With Hook, 95mm Thread Length, Stainless Steel - Kukamet
Take advantage of a robust combination of stainless steel construction, high holding capacity and a space-saving horizontal base for reliable fixture work. Order the latch clamp directly via Metav Werkzeuge or consult our specialists for specification checks and supply planning. Toggle latch clamp »331« (S331-4) – stainless steel horizontal-base clamp by Kukamet Toggle latch clamp »331« is a horizontal-base stainless-steel latch designed for secure workholding and fixture applications in workshops and light industrial environments. Stainless steel construction for corrosion resistance Horizontal base for bench or fixture mounting Hook-equipped for positive engagement Holding capacity up to 8,000 N Reliable performance for repeatable production The stainless steel body provides long-term resistance to corrosion and wear, making the clamp suitable for environments where durability matters. The device converts operator input into repeatable clamping power through a mechanical toggle mechanism, offering a holding force of 8,000 N and a maximum clamping pressure of 7,000 N. This combination ensures that fixtures remain secure during machining, assembly or testing operations, reducing rework and downtime. Where process reliability is critical, the robust construction supports continuous use without frequent replacement. Compact mounting that saves setup time Designed with a horizontal base, the clamp fits neatly on bench plates and fixture frames, simplifying integration into existing jigs and tooling. The horizontal mounting reduces the vertical profile of the clamping arrangement, freeing space above the workpiece for tooling access and inspection. The hook feature ensures a positive engagement point, so parts are held consistently in position. For engineers optimising fixture layouts, the shortened thread engagement and compact footprint help maintain clearances and streamline component handling. Easy specification and compatibility for production planners Key dimensions such as the 95 mm thread length and a net body weight of 0.72 kg make the clamp straightforward to include in BOMs and CAD models. The mechanical principle requires no electrical supply and offers simple actuation, reducing integration complexity compared with powered systems. For mixed-material production, the all-metal stainless build minimises contamination risks and is straightforward to clean. Specifiers benefit from the clear numeric values for clamping and holding forces, enabling direct comparison with alternative clamps and calculation of safety margins for specific fixtures. Contact Metav Werkzeuge to discuss how the Kukamet toggle latch clamp (SKU S331-4) fits into existing fixtures or to secure supply from our Emmerich warehouse – phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: S331-4 GTIN: 8680731509793 Model: 331 Manufacturer: Kukamet Facts Max clamping force: 7,000 N Max holding force: 8,000 N Thread length: 95 mm Weight: 0.72 kg eClass: 21041718 ETIM: EC011973 Special features Material: Stainless steel Mounting: Horizontal foot With hook: Yes Category: Spanner FAQ What applications is this clamp best suited for? The Kukamet toggle latch clamp 331 (SKU S331-4) is ideal for fixture work, assembly jigs and light machining tasks where a reliable, repeatable mechanical clamp is required. Can the clamp withstand humid or corrosive workshop conditions? Yes, the stainless steel construction of the 331 latch clamp provides enhanced corrosion resistance, making it suitable for demanding shop-floor environments. How much force does the device provide and how is it specified? The clamp delivers a maximum clamping force of 7,000 N and a holding capacity up to 8,000 N, values given for design and safety calculations. Is the clamp easy to mount on existing fixtures? The horizontal base design and the defined 95 mm thread length make the clamp straightforward to integrate into bench plates or bespoke fixtures. Which SKU or model should be referenced when ordering spare clamps? Reference SKU S331-4 or model 331 when ordering the Kukamet toggle latch clamp to ensure correct supply. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800N Push Rod Clamp Horizontal Base Zinc-Plated, 970N Holding Force - Kukamet
Take advantage of a compact, high‑force clamp that combines secure holding, corrosion‑resistant finish and simple adjustment for repetitive fixture work; order directly via Metav Werkzeuge or consult our specialists for integration advice. Pushrod clamp 511 by Kukamet — horizontal foot, 800 N clamping force The Pushrod clamp 511 is a horizontal‑foot lever clamp designed for fixture and jig applications, offering reliable repeatable clamping with an adjustable M5x35 pressure spindle. Horizontal foot mounting for stable installation Zinc‑plated finish for corrosion resistance Up to 800 N clamping force M5x35 adjustable pressure spindle Secure clamping that boosts process reliability The compact unit delivers a clamping force of 800 N with a holding force of 970 N, providing consistent pressure for small to medium assembly and fixturing tasks. Its low mass (0.135 kg) makes it suitable where low inertia is required, while the robust force figures ensure components remain stationary during machining, inspection or assembly. Clear numerical ratings enable engineering planners to compare performance and to calculate safety margins for repeated production cycles. Fast mounting and tool‑room friendly adjustment Featuring a horizontal foot for secure attachment, the clamp integrates easily into existing fixtures and jig plates. The M5x35 pressure spindle (metric thread M5, 35 mm length) allows fine adjustment of contact point and clamping travel, enabling precise set‑up without additional parts. The simple mechanical interface reduces set‑up time and supports frequent changeovers, which is particularly advantageous in small batch runs or mixed production environments. Corrosion protection for long service life A zinc‑plated finish provides corrosion resistance suitable for workshop atmospheres and environments where occasional coolant or humidity exposure occurs. The surface treatment lowers the need for frequent replacement and keeps maintenance requirements to a minimum, contributing to dependable uptime and reduced lifecycle costs. The straightforward design means servicing is limited to routine inspection and occasional lubrication of the spindle thread. Compact solution for fixtures and production jigs Engineered for use in clamping applications, this lever‑style pushrod clamp is ideal for assembly benches, holding devices and portable jigs where space and repeatability are priorities. The combination of a low profile mounting foot, adjustable spindle and defined force ratings supports modular fixture design and predictable part handling. Integrators benefit from a component that is easy to specify, fits standard metric hardware and helps maintain consistent production quality. Contact Metav Werkzeuge to discuss how the Kukamet pushrod clamp 511 can be specified for fixtures and jigs, and to receive tailored advice from our Emmerich‑based team Technical data Article number: 511-1 GTIN: 8680731502602 Manufacturer: Kukamet SKU: 511-1 Core measurements Clamping force (max): 800 N Holding force (max): 970 N Weight: 0.135 kg Pressure spindle: M5x35 Materials & features Material: zinc‑plated Mounting type: horizontal foot Special features: none FAQ What clamping and holding forces does this clamp provide? The pushrod clamp 511 offers a maximum clamping force of 800 N and a holding force of 970 N, providing defined values for fixture design and safety calculations. How is the pressure point adjusted on this clamp? Adjustment is via the M5x35 pressure spindle; the thread size (M5) and 35 mm length permit fine setting of the contact point without additional components. Which mounting option is required for installation? The unit is supplied for horizontal foot mounting, allowing stable fixation to jig plates or fixture bases in a low‑profile arrangement. Is the clamp suitable for workshop environments with occasional moisture? Yes, the zinc‑plated finish offers corrosion resistance for typical workshop atmospheres, reducing maintenance and extending service life. Can the component be used in small batch or reconfigurable fixtures? Designed for repeatable clamping and easy integration, the pushrod clamp 511 is well suited to modular jigs, changeover fixtures and small‑batch production environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800N Push Rod Clamp Horizontal Foot, 970N Holding Force, Black Oxide - Kukamet
Take advantage of a compact clamping solution that combines high holding capability with precise actuation: sturdy 970 N holding force, reliable 800 N maximum thrust and a space-saving horizontal foot for straightforward integration. Order directly through Metav Werkzeuge or consult our specialists for specification support and dependable European supply. Kukamet 511 Push-rod Clamp — 800 N thrust, horizontal foot A Kukamet 511 push-rod clamp designed for fixture and jig applications where compact, repeatable clamping and reliable holding are required. 800 N maximum thrust 970 N holding force Horizontal foot mounting Compact, blackened finish Robust clamping performance for reliable fixtures The compact push-rod clamp delivers dependable force where consistent workholding is essential. With a rated 800 N maximum thrust and 970 N holding force, the device secures components with minimal movement during machining or assembly, improving process stability. The blackened finish protects surfaces and reduces glare at the workstation. Built-in simplicity reduces potential failure points while maintaining the performance expected in professional workshop environments. Easy integration and precise adjustment Equipped with an M5x35 pressure spindle, the clamp allows fine adjustment of contact pressure and stroke end position, supporting precise seating without complex setup. The horizontal foot mounting facilitates low-profile installation on jigs and fixtures, saving vertical space on the workbench. Weighing just 0.135 kg, the unit contributes negligible mass to the assembly, aiding balance on lightweight tooling and reducing inertia during rapid positioning. Practical benefits for production workflows The small footprint and straightforward design of this clamp enable rapid fixture assembly and repeatable results across batches. Robust mechanical characteristics support applications where consistent clamping is required but extensive adaptation is not practical. Supplied by Kukamet and distributed via Metav Werkzeuge, the product benefits from quality filtering and dependable stock handling in Emmerich, ensuring continuity of supply for industrial users and specialist workshops. Choose the Kukamet 511 for robust 800 N thrust and 970 N holding force — contact Metav Werkzeuge for tailored procurement and reliable delivery from Emmerich Technical data SKU: B511-1 GTIN: 8680731503852 EClass: 21041716 ETIM: EC011973 Facts Maximum thrust: 800 N Holding force (max): 970 N Weight: 0.135 kg Pressure spindle: M5 x 35 Special features Mounting: horizontal foot Finish: blackened (blued) Product category: Clamp (Spanner) FAQ What is the main clamping capacity of this unit? The Kukamet 511 push-rod clamp provides a maximum thrust of 800 N and a holding force of 970 N, offering reliable fixture clamping for small to medium applications. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the Kukamet 511 is designed for low-profile installation on jigs and fixtures to conserve vertical space. Can the contact pressure be adjusted? Yes, the clamp uses an M5x35 pressure spindle for fine adjustment of contact pressure and end position to suit specific workpieces. Is the clamp suitable for lightweight tooling setups? With a weight of 0.135 kg the Kukamet 511 is lightweight and well suited for integration into delicate or compact tooling assemblies. Where is supply and distribution handled? Distribution and stock handling for the Kukamet 511 is managed via Metav Werkzeuge in Emmerich, ensuring consistent European supply. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800N Push Rod Clamp Vertical Base, 970N Holding Force, Blackened Finish 0.135kg - Kukamet
Take advantage of the combination of secure holding force, compact design and a durable black‑blued finish for reliable clamping in confined fixtures. Order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. Push-rod Clamp 512 by Kukamet — vertical-foot clamp with M5x35 pressure spindle The Push-rod Clamp 512 is a compact vertical-foot clamping device designed for light‑duty fixtures and assembly jigs, providing repeatable holding performance where space is limited. Vertical-foot mounting for space-saving set-up High holding force: 970 N for secure clamping 800 N clamping thrust for repeatable action Black blued finish resists wear and glare Secure, measurable clamping for consistent results The clamp delivers a clearly defined holding force of 970 N and a clamping thrust of 800 N, values that translate directly into dependable fixture performance. Such numerical ratings support predictable process planning: the specified forces enable the selection of suitable workpiece supports and mating hardware, reducing rework and downtime. The pressure spindle (M5x35) allows fine contact adjustment, so the actuator achieves firm engagement without excessive preload. For operations that demand repeatability rather than brute force, this balance of thrust and hold ensures consistent part positioning across cycles. Space-saving installation and robust finish for workshop use At just 0.135 kg, the unit is lightweight enough to integrate into compact assemblies while the vertical-foot mounting minimises the required footprint on trolleys or small tooling plates. The black blued surface offers basic corrosion protection and a low-reflective appearance that helps avoid glare under strong workshop lighting. The simple geometry and modest mass reduce inertia in automated or manually actuated setups, which is advantageous where quick, frequent clamping actions are needed. Installation is straightforward thanks to the dedicated foot mounting and standard spindle thread. Low-maintenance actuation with practical application scope The mechanical design focuses on straightforward function: a push-rod mechanism with an M5x35 contact spindle gives tactile adjustment and quick replacement if required. The finish and materials support routine workshop environments without specialised upkeep; occasional lubrication of the spindle and a visual check of the mounting suffice for normal service intervals. The device is intended for light to medium fixture tasks in metalworking and assembly contexts, offering a pragmatic solution when compact, reliable clamping is a priority rather than heavy-duty harvesting of holding forces. For secure, compact clamping solutions, contact Metav Werkzeuge for ordering and tailored advice on the Kukamet Push-rod Clamp 512 — reliable guidance from Emmerich for immediate integration into your fixtures Technical data SKU: B512-1 GTIN: 8680731508697 Model designation: 512 Manufacturer: Kukamet Facts Clamping thrust: 800 N Holding force: 970 N Weight: 0.135 kg Pressure spindle: M5x35 Mounting type: vertical foot Surface finish: black blued eClass: 21041716 ETIM: EC011973 Special features Compact push‑rod clamping mechanism Low mass for tight installations Durable black‑blued surface Suitable for light‑duty fixture and jig applications Category: Spanner FAQ What clamping and holding forces does the clamp provide? The Kukamet Push-rod Clamp 512 specifies a clamping thrust of 800 N and a holding force of 970 N, enabling predictable fixture performance for repeatable operations. How is the clamp mounted in a fixture? Mounting is by a vertical foot; the vertical‑foot arrangement of the clamp simplifies installation on narrow plates and tight jig layouts. What contact spindle is fitted and can it be adjusted? The device uses an M5x35 pressure spindle, which permits fine adjustment of contact pressure and straightforward replacement if necessary. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com