Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
71° 2500 N Horizontal Clamp, Zinc Plated, 2800 N Holding Force, 0.46 kg - Kukamet
Take advantage of a compact, galvanised design with 2,500 N clamping force and a 2,800 N holding capacity to secure repeatable clamping results in light- to medium-duty applications; order through Metav Werkzeuge or consult the sales team for specification matching. Horizontal clamp 121 – lever-operated horizontal base clamp by Kukamet, galvanised, 2,500 N clamping force The Horizontal clamp 121 is a lever-operated hold-down designed for horizontal mounting where fast, reliable securing of workpieces is required across workshop and industrial settings Lever-operated horizontal base mounting Galvanised steel for corrosion resistance 2,500 N clamping force, 2,800 N holding force Lightweight 0.46 kg compact design Consistent force for repeatable processes The clamp delivers a defined 2,500 N clamping force and a 2,800 N holding capacity, values that support reproducible fixing across successive operations. Expressing these forces in newtons provides an objective basis for process planning: the first value denotes the applied clamping pressure while the second quantifies the passive retention under stress. For assembly jigs and fixture setups, the measurable performance reduces variation and shortens cycle validation time. The lever mechanism ensures the force is applied quickly and without complex adjustment, improving throughput in repetitive tasks. Corrosion-resistant construction for long service life Constructed from galvanised steel, the component resists surface corrosion commonly encountered in workshop environments and light manufacturing. The low mass of 0.46 kg and compact footprint make integration into existing fixtures straightforward, while the horizontal foot mounting enables flush installation on worktops or tooling plates. The surface finish reduces maintenance intervals and preserves clamping geometry, which translates into fewer interruptions for replacement or refurbishment and steadier long-term accuracy. Efficient operation and ergonomic handling The lever-based actuation operates over a 71° travel angle, offering a balance between grip range and operator ergonomics; the lever action provides tactile feedback at the clamping point, aiding repeatable closure without electronic aids. Where rapid part changeover is required, the compact mechanism reduces downtime and simplifies fixture layout. The unit’s straightforward design allows easy visual inspection of engagement and quick verification that the workpiece is secured before machining or assembly. Discuss specification matching or request a quote from Metav Werkzeuge for the Kukamet Horizontal clamp 121 (SKU 121-3) — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability for the intended application Technical Data Article number: 121-3 GTIN: 8680731501087 Brand: Kukamet Mounting: horizontal foot Facts Clamping force: 2,500 N Holding force: 2,800 N Weight: 0.46 kg Angle: 71° eClass: 21041719 ETIM: EC011973 Special features Material: galvanised Category: Spanner Special feature: none FAQ What clamping and holding forces does this clamp provide? The Kukamet Horizontal clamp 121 provides a clamping force of 2,500 N and a holding force of 2,800 N, suitable for repeatable light- to medium-duty fixture work. How is the clamp mounted to a fixture or workbench? Mounting is via a horizontal foot; the Kukamet unit is designed for flush installation onto tooling plates or bench tops using the horizontal base. What material is the clamp made from and how does that affect durability? The clamp is made from galvanised steel, which improves resistance to surface corrosion and reduces maintenance needs in workshop environments. Is the clamp suitable for quick part changeovers? Yes. The lever-operated mechanism with a 71° travel angle enables fast engagement and release, supporting efficient changeovers in repetitive processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750 N Andruckkraft, 1000 N Haltekraft, senkrechter Fuß, M5x35 Andruckspindel, 0,155 kg, Edelstahl - Kukamet
Mit korrosionsbeständigem Edelstahl, einer Haltekraft von 1.000 N und kompakter Bauform bietet der Vertikalspanner 212 eine langlebige und zuverlässige Lösung für präzise Spannaufgaben. Nutzen Sie die Kombination aus Stabilität und einfacher Montage für wiederholbare Spannprozesse und fragen Sie bei Bedarf die fachkundige Beratung von Metav Werkzeuge an. Vertikalspanner 212 von Kukamet Der Vertikalspanner 212 ist ein kompakter Edelstahl-Spanner mit senkrechtem Fuß für präzise Spannaufgaben in Werkstatt und Produktion Vertikalspanner »212« von Kukamet Edelstahlgehäuse für lange Lebensdauer Haltekraft bis 1.000 N für sichere Fixierung Druckkraft bis 750 N, präzise Betätigung Befestigung mit senkrechtem Fuß, kompakte Bauform Robuste Konstruktion für dauerhaften Einsatz Der Spanner verfügt über ein Edelstahlgehäuse, das Korrosion vorbeugt und die Wartungsintervalle reduziert. Diese Materialwahl sorgt für gleichbleibende Maßhaltigkeit und langlebige Funktion auch unter rauen Betriebsbedingungen. Die geringe Masse des Spanners macht ihn geeignet für Vorrichtungen mit begrenzter Belastbarkeit, ohne dabei Stabilität und präzise Bedienung zu opfern. Präzise Kraftwerte für verlässliche Spannprozesse Die technischen Kennwerte zeigen die Leistung: Druckkraft 750 N beschreibt die Betätigungskraft, während die Haltekraft 1.000 N die maximal sichere Fixierung bezeichnet. Die Andruckspindel M5x35 erlaubt feine Einstellschritte und erleichtert die Wiederholgenauigkeit bei Serienfertigung. Diese Werte machen das Gerät besonders geeignet für wiederkehrende Spannzyklen mit gleichbleibender Presskraft. Platzsparende Montage und einfache Integration Die Befestigungsart mit senkrechtem Fuß reduziert den Platzbedarf auf der Montageplatte und erleichtert die Integration in bestehende Spannvorrichtungen. Durch die kompakte Bauform lässt sich das Bauteil auch in beengten Anwendungen anbringen, was Einspannoptionen flexibilisiert und Einrichtzeiten reduziert. Gewicht und Abmessungen unterstützen schnelle Umrüstungen zwischen Fertigungsstationen. Zielgruppe und typische Einsatzfelder Der Spanner richtet sich an Werkstattbetreiber, Vorrichtungsbauer und Prüftechnik, die eine robuste, wiederholbare Spannlösung verlangen. Anwendungsszenarien sind Prüfframes, Montagevorrichtungen und mechanische Testaufbauten, bei denen konstante Haltekraft und Korrosionsbeständigkeit entscheidend sind. Die einfache Mechanik macht das Produkt zur wirtschaftlichen Wahl für Serien- und Handfertigung gleichermaßen. Kukamet Vertikalspanner 212 wegen Edelstahlkonstruktion und 1.000 N Haltekraft über Metav anfragen — unser Team in Emmerich berät gern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: S212-1 Marke: Kukamet Bezeichnung: Vertikalspanner 212 Fakten Druckkraft Max: 750 N Haltekraft Max: 1000 N Gewicht: 0.155 kg Andruckspindel: M5x35 Besonderheiten Material: Edelstahl Befestigungsart: senkrechter Fuß Besonderheit: Keine Storytrigger: hebelspanner ECLASS: 21041717 — Industrieklassifikation ETIM: EC011973 — Technische Produktklassifikation FAQ Wie hoch ist die Haltekraft des Vertikalspanner 212 von Kukamet? Die Haltekraft des Vertikalspanner 212 beträgt 1.000 N, sodass Bauteile zuverlässig fixiert werden können; die Angabe ist in der technischen Datenübersicht des Produkts S212-1 dokumentiert. Ist der Vertikalspanner 212 für den Einsatz in feuchter Umgebung geeignet? Aufgrund des Edelstahlgehäuses ist der Vertikalspanner 212 von Kukamet besser gegen Korrosion geschützt als unbeschichtete Ausführungen; für spezielle Umgebungsanforderungen empfiehlt sich eine kurze Rückfrage bei Metav Werkzeuge. Welche Spindelgröße hat der Kukamet Vertikalspanner 212? Der Vertikalspanner 212 ist mit einer Andruckspindel M5x35 ausgestattet, wodurch feine Justierungen und sicheres Anpressen bei Prüf- und Montagevorgängen möglich sind. Kann der Vertikalspanner 212 in bestehende Vorrichtungen integriert werden? Ja, die Befestigung mit senkrechtem Fuß und die kompakte Bauform des Vertikalspanner 212 (Artikelnummer S212-1) erleichtern die Integration in Montage- und Prüfplatten; bei Bedarf unterstützt Metav Werkzeuge bei technischen Fragen.
750 N Vertical Clamp With Safety Lock, Vertical Base, Blackened Finish - Kukamet
Take advantage of the combination of compact mounting, dependable clamping and an integrated safety lock for secure, repeatable holding in jigs and fixtures. Order the Vertical clamp 212 directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 212 – Kukamet vertical clamp with safety lock and 750 N clamping force The Vertical clamp 212 is a compact, foot-mounted lever clamp designed for light industrial fixtures and workshop jigs, providing secure vertical clamping where space is limited. Safety lock for secure clamping Vertical foot mounting for compact fit 750 N clamping force, 1000 N holding force Black blued finish, corrosion-resistant Consistent holding power for repetitive tasks The clamp delivers a defined 750 N clamping force with a maximum holding force of 1,000 N, making it suitable for repeatable operations in assembly and machining fixtures. The M5x35 pressure spindle ensures a precise contact point and can be adjusted to accommodate small part tolerances; this technical combination reduces slippage and contributes to predictable process outcomes. By converting specification into measurable reliability, setup times are shortened and downstream rework is minimised. Compact mounting that saves bench space A vertical foot mounting enables installation on narrow fixture plates and tight tooling arrangements, allowing the component to be clamped from above without enlarging the footprint. The unit’s black blued finish offers basic corrosion protection and a professional appearance while keeping mass to a minimum at 0.155 kg, which helps when balancing moving fixtures or rotary pallets. The design is therefore appropriate for both small-series production and lab-style test rigs where space and cleanliness matter. Integrated safety features and straightforward integration Equipped with a safety lock, the clamping arm remains secured under vibration and during handling, supporting operator safety and consistent process results. The component’s simple geometry and standard thread sizes permit rapid integration into existing jigs; fixture engineers benefit from predictable interfaces and reduced custom machining. For businesses consolidating suppliers, choosing a well-documented clamp supports leaner procurement and steady uptime. Choose Kukamet’s robust vertical clamping solution for reliable fixture performance and contact Metav Werkzeuge for application guidance and fast supply from Emmerich. Technical data Article number: B212-1-L GTIN: 8680731507850 ECLASS: 21041717 ETIM: EC011973 Brand: Kukamet Core specifications Clamping force: 750 N Holding force: 1,000 N Weight: 0.155 kg Pressure spindle: M5 x 35 Features and construction Finish: black blued Mounting: vertical foot Safety lock: yes Arm: not applicable Category: Clamps / Spanner FAQ What clamping and holding forces does the clamp provide? The Vertical clamp 212 provides a clamping force of 750 N and a maximum holding force of 1,000 N, suitable for secure workholding in light industrial fixtures. Is the pressure spindle adjustable and what size is it? The tool is fitted with an M5 x 35 pressure spindle, offering fine adjustment of the contact point for small-part tolerance compensation. Can the clamp be mounted on narrow fixture plates? The vertical foot mounting is designed for compact installation on narrow plates and tight jigs, enabling overhead clamping without a large footprint. Does the clamp include a safety mechanism for vibration-prone environments? Yes, the unit features an integrated safety lock that secures the clamping position against vibration and accidental release. What surface protection is applied to the clamp? A black blued finish is applied to the clamp to provide basic corrosion resistance and a durable working surface. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500 N Pneumatic Pushrod Clamp 20 mm Piston, 15000 N Holding Force, Zinc-Plated - Kukamet
Take advantage of high clamping forces, a zinc‑plated corrosion‑resistant finish and a compact horizontal‑foot design to secure fixtures reliably in repetitive production tasks; order or request guidance directly through Metav Werkzeuge's consultants for a smooth integration. Pneumatic push-rod clamp 661 by Kukamet — 7,500 N push force, 20 mm piston The Pneumatic push-rod clamp 661 is a compact pneumatic clamp designed for horizontal‑foot mounting and robust fixture clamping in industrial jigs and assembly lines Max. push force 7,500 N Holding force up to 15,000 N Zinc-plated corrosion resistant Horizontal foot mounting Secure, measurable clamping performance that speeds up production The clamp delivers a clear performance profile: a push force of 7,500 N and a holding force up to 15,000 N, combined with a 20 mm piston diameter. These numerical specifications translate into repeatable clamping cycles and dependable workpiece retention under dynamic loads. Because the unit is pneumatically actuated, cycle times are shortened and process stability is improved; this is particularly relevant where fast clamp/unclamp sequences reduce overall takt time. The zinc‑plated finish contributes to long‑term reliability in workshop environments where occasional coolant or humidity exposure is present. Space‑saving installation and straightforward fixture integration The horizontal‑foot format simplifies mounting on custom jigs and existing fixture plates, while the compact footprint keeps surrounding tooling accessible. With a weight of 3.278 kg and durable construction, the clamp balances sturdiness with manageable handling during fixture assembly or repositioning. The product is identified as SKU 661-5-Q20 (GTIN 8680731503159), which aids in documentation and spare‑part management. Pneumatic actuation requires standard compressed air connections and offers low maintenance compared with fully electric alternatives, supporting a predictable total cost of ownership across many production cycles. Built for continuous operation and dependable workshop service Robust materials and a corrosion‑resistant surface mean the unit maintains performance in daily use; zinc plating reduces the need for frequent surface care. The design emphasises reliable clamping force over many cycles, making it suitable for repetitive metalworking and assembly applications where consistency is critical. Integration into automated or semi‑automated systems is facilitated by the clamp's straightforward kinematics and standard pneumatic control. Combined with Metav's role as a quality filter and supplier, this clamp supports an uninterrupted supply chain for industrial users seeking proven components. For specification advice or to secure the Kukamet pneumatic push-rod clamp 661 with 7,500 N push force, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or phone +49 2822 7131930 for tailored assistance Technical data SKU: 661-5-Q20 GTIN: 8680731503159 ECLASS: 21041716 ETIM: EC011973 Brand: Kukamet Facts Max. push force: 7,500 N Max. holding force: 15,000 N Piston diameter: 20 mm Weight: 3.278 kg Special features Material: zinc-plated Mounting: horizontal foot Actuation: pneumatic FAQ What clamping forces does the clamp provide? The Kukamet pneumatic push-rod clamp 661 delivers a push force of 7,500 N and a holding force of up to 15,000 N for secure retention in demanding fixture tasks. How is the clamp mounted to a fixture? The unit is designed for horizontal foot mounting, enabling easy fixation to plates or jig bases and straightforward integration into existing tooling. What maintenance does the clamp require? Routine checks of pneumatic fittings and periodic inspection of the zinc-plated surfaces are recommended; the finish reduces corrosion and helps prolong service life of the clamp. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation and compact design make the clamp well suited to repetitive cycles in semi‑automated or fully automated fixtures where reliable, rapid clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500 N Pneumatic Pushrod Clamp, 20 mm Piston, Zinc-Plated Cast Body, Holding Force 18450 N - Kukamet
Take advantage of fast pneumatic actuation and high holding capacity to secure fixtures reliably while keeping maintenance low; the compact Pneumatic push-rod clamp 641 combines a robust zinc‑plated cast body with precise force control for stable production processes. Order the Pneumatic push-rod clamp 641 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic push-rod clamp 641 by Kukamet – horizontal mounting, 7,500 N push force The Pneumatic push-rod clamp 641 is a compact clamping element for horizontal fixture feet, designed to deliver consistent push and hold forces in series production and machining jigs. Pneumatic push-rod actuation 7,500 N push force 18,450 N holding force Zinc-plated cast body, 4.28 kg Faster cycles through dependable pneumatic clamping The clamp uses pneumatic actuation to provide rapid, repeatable clamping strokes that reduce cycle times in high-throughput environments. With a 7,500 N push force and an ultimate 18,450 N holding capacity, the device secures workpieces during machining and handling, limiting movement under lateral and axial loads. For production planners and workshop managers this translates into fewer rejects and a predictable clamping behaviour that supports process optimisation and consistent part quality. Built for durability and low upkeep A zinc-plated finish and cast body combine to resist corrosion and mechanical wear in demanding workshop conditions, helping to prolong service life and reduce maintenance intervals. The unit weighs 4.28 kg and uses a 20 mm piston diameter to balance compactness with force transmission. This rugged construction suits use in metalworking fixtures where long-term stability is required, and it reduces replacement frequency compared with lighter, less robust clamps. Smooth integration in fixture systems and automation Engineered for horizontal foot mounting, the push-rod design enables straightforward integration into jigs, pallets and automated workholding systems. The horizontal foot allows fixed positioning on base plates while the push-rod delivers linear actuation into the clamping plane, simplifying layout and repeatability in assembly lines. The clamp’s specification supports both manual and semi-automated setups, making it appropriate for toolrooms, subcontract machining and production cells where reliable, repeatable clamping is essential. Proven supply and service pathway for reliable uptime Sourcing from an established supplier streamlines procurement and spare-part planning. Metav’s offering emphasises dependable logistics from Emmerich and an extensive product range, making it easier to standardise on components that are available across sites. The combination of industrial-grade construction and a reliable supply chain supports operational continuity and aligns with long-term quality strategies expected by maintenance engineers and procurement teams. Contact Metav Werkzeuge for tailored advice on specifying the Kukamet Pneumatic push‑rod clamp 641 for fixtures and automated cells; Metav Werkzeuge is available from Emmerich for product supply and technical consultation – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 641-5-Q20 GTIN: 8680731503074 SKU: 641-5-Q20 Facts Weight: 4.28 kg Piston diameter: 20 mm Push force (max): 7,500 N Holding force (max): 18,450 N eClass: 21041716 ETIM: EC011973 Special features Material: zinc-plated with cast body Mounting: horizontal foot Actuation: pneumatic push-rod Manufacturer: Kukamet FAQ What clamping forces does the clamp provide? The Kukamet Pneumatic push-rod clamp 641 delivers a push force of 7,500 N and a holding capacity of 18,450 N, enabling secure retention during machining and handling. Is the clamp suitable for automated fixtures? Yes. The horizontal foot mounting and pneumatic push-rod design of the 641 are intended for integration into jigs, pallets and automated workholding systems where repeatable actuation is required. What material and surface treatment does the device have? The body is cast and zinc‑plated, offering enhanced resistance to corrosion and mechanical wear for workshop and industrial environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500N Pneumatic Plunger Clamp Three-Point Holding Force 18450N, Zinc Plated Cast Body - Kukamet
The combination of consistent 18,450 N holding force, a robust zinc-plated cast body and a compact 20 mm piston ensures dependable clamping performance and long service life; order the pneumatic push-rod clamp directly via Metav Werkzeuge or ask our consultants if further clarification is required. Pneumatic Push-Rod Clamp 671 by Kukamet — 7.5 kN thrust, 18.45 kN holding force The Pneumatic Push-Rod Clamp 671 is a horizontal-foot mounted pneumatic clamp designed for secure workpiece retention in production fixtures and jig applications. High holding force 18,450 N 7,500 N maximum thrust Zinc-plated cast body for durability Horizontal foot mount for fixture compatibility Consistent force for repeatable machining results Engineered to deliver a sustained 7,500 N thrust and a peak 18,450 N holding force, this clamp converts pneumatic input into reliable mechanical retention. The clearly defined force ratings translate directly into predictable machining outcomes, reducing rework and cycle variation. By specifying these measurable values, planners and process engineers can calculate clamping load, safety factors and fixture dimensioning with confidence, supporting efficient production planning and higher first-pass yield. Robust construction for demanding shopfloor use The cast body with zinc plating provides a corrosion-resistant exterior while preserving structural integrity under repetitive load. At 3.64 kg, the unit balances mass for stability without overburdening the fixture. The material choice and surface finish mean the clamp tolerates typical workshop environments and handling during assembly, resulting in fewer replacements and lower lifecycle disruption compared with less durable alternatives. Simple integration into fixtures and jigs Equipped with a horizontal foot mount, the clamp is intended for lateral attachment to plates and bases common in fixture design. The piston diameter 20 mm supports compact stroke design and makes the clamp suited to confined layouts where space optimisation is essential. These features reduce integration time and allow the clamp to be used in standardised tooling arrangements, shortening setup time and simplifying spare-parts management. Practical benefits for production workflows With clear identifiers such as SKU 671-5-Q20, GTIN 8680731503203, and classification codes for system planning, the clamp is ready for inventory control and machine-room documentation. The straightforward specification supports rational procurement and maintenance scheduling, while the clamp’s measured performance characteristics underpin process reliability. For companies seeking affordable precision, Metav Werkzeuge combines product availability with decades of distribution experience to make proven clamping solutions accessible across workshops and small-scale production lines. Contact Metav Werkzeuge for tailored advice and to secure the Kukamet Pneumatic Push-Rod Clamp 671 for reliable fixture clamping in your production setup. Technical Data Article number: 671-5-Q20 GTIN: 8680731503203 Manufacturer: Kukamet eClass: 21041716 ETIM: EC011973 Core Figures Maximum thrust: 7,500 N Maximum holding force: 18,450 N Piston diameter: 20 mm Weight: 3.64 kg Materials & Features Material: zinc-plated with cast body Mounting: horizontal foot Suitable for use in production fixtures and jigs SKU: 671-5-Q20 FAQ Is this clamp suitable for automated fixtures that require frequent actuation? The Kukamet Pneumatic Push-Rod Clamp 671 is specified with a 7,500 N thrust and designed for repetitive pneumatic operation, making it suitable for fixtures requiring frequent actuation under normal shopfloor conditions. What mounting options are available for the clamp? The clamp features a horizontal foot mount, enabling direct attachment to standard fixture plates and bases for lateral clamping arrangements. How does the clamp resist corrosion in a workshop environment? Construction uses a zinc-plated cast body, which offers surface protection against corrosion and improves longevity in industrial environments. Can the clamp be documented easily in procurement and maintenance systems? Yes; the unit is supplied with identifiers such as SKU 671-5-Q20 and GTIN 8680731503203, facilitating inventory control and technical documentation. What information is available for fixture designers calculating clamping loads? Designers can use the listed 7,500 N thrust and 18,450 N holding force as the basis for clamping load calculations and safety factor assessments when planning fixtures for machining or assembly. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500N Pneumatic Push Rod Clamping Device Horizontal Base, Zinc Plated 20mm Piston - Kukamet
Take advantage of a robust clamping solution that combines strong actuating power with high holding capacity for secure fixturing and consistent cycle performance. The zinc-plated construction and horizontal-foot mounting ensure corrosion resistance and simple integration on the shop floor — order or request an application consultation via Metav Werkzeuge for fast, reliable supply. Pneumatic push-rod clamp 621 — 7,500 N actuating force, zinc-plated (Kukamet) A Pneumatic push-rod clamp 621 engineered for horizontal-foot mounting, delivering heavy-duty holding and repeatable actuation for industrial assembly and machining operations 7,500 N actuating force 15,000 N maximum holding force 20 mm piston diameter Zinc-plated corrosion resistance Secure fixturing with measurable force and repeatability The clamp provides a measured 7,500 N actuation output and a 15,000 N maximum holding capacity, values that translate directly into secure part retention during machining and assembly. The relationship between actuating force and holding force ensures that once engaged the clamping element resists displacement under process loads; this reduces rework and stoppages. The unit’s moderate mass and compact profile contribute to predictable dynamics on moving fixtures, while the piston diameter 20 mm balances air consumption with stroke speed. Technical numbers are given for planning and ensure objective comparability across clamping solutions. Durable finish and mounting for workshop environments A zinc-plated surface treatment protects the mechanism against corrosion in humid or mildly contaminated environments, extending service intervals and preserving contact geometry. The clamp is supplied for horizontal foot mounting, which simplifies bench or fixture attachment and maintains a low profile inside assemblies. The corrosion-resistant finish combined with stable mounting reduces long-term maintenance and helps maintain consistent clamping geometry, which is essential for repeatable component alignment and surface integrity during production cycles. Efficient pneumatic integration and application versatility Designed for straightforward pneumatic control, the unit integrates with standard air-supply systems and valve configurations to enable quick cycle times and reliable actuation. The compact actuator and defined piston size support predictable air consumption, aiding compressed-air system sizing and energy budgeting. Documentation, including the catalogue page, supports installation planning and spare-part identification. As a practical partner for the workshop, Metav Werkzeuge supplies this clamp with traceable identification for procurement and inventory management, supporting a dependable supply chain for production operations. Discuss integration and delivery with Metav Werkzeuge — request application guidance for the Kukamet Pneumatic push-rod clamp 621 and ensure the clamping solution meets specific process requirements Technical Data Article number: 621-5-Q20 GTIN: 8680731502985 Model: 621 Weight: 3.86 kg Surface: Zinc-plated Manufacturer: Kukamet Key figures Max actuating force: 7,500 N Max holding force: 15,000 N Piston diameter: 20 mm eClass: 21041716 ETIM: EC011973 Features and mounting Mounting: horizontal foot Category: Spanner Files: 621-katalogseite.pdf FAQ What is the maximum holding force of this clamp? The Kukamet Pneumatic push-rod clamp 621 (SKU 621-5-Q20) provides a maximum holding force of 15,000 N for secure part retention. How much actuating force does the clamp deliver? Actuation is specified at 7,500 N, which describes the push force generated by the pneumatic piston when energised. What piston size does the clamp use? The device is fitted with a 20 mm piston diameter, a dimension that influences air consumption and stroke characteristics. Which mounting method is provided for fixture attachment? The clamp is designed for horizontal foot mounting, allowing straightforward attachment to benches and fixtures. Is the clamp suitable for environments with humidity or splash? The unit features a zinc-plated surface for improved corrosion resistance in typical workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500N Push Rod Clamp With 20mm Piston, Horizontal Foot, Zinc‑Plated Cast Body, 18.45kN Hold Force - Kukamet
Take advantage of a compact, workshop-ready clamp that combines a high holding force of 18,450 N with an adjustable pressing force of 7,500 N and a zinc-plated cast body for long service life; order directly via Metav Werkzeuge or ask their consultants for application advice. Push-rod clamp 532 by Kukamet — horizontal foot, 7,500 N pressing force The Push-rod clamp 532 is a compact workholding clamp designed for horizontal mounting in fixtures and machine tables, delivering reliable clamping and simple adjustment for repeatable setups. Horizontal-foot mounting for stable anchoring Holding force up to 18,450 N Zinc-plated cast body for corrosion resistance Robust clamping for demanding fixtures The clamp provides a pronounced holding force of 18,450 N while the adjustable pressing force reaches 7,500 N, ensuring secure retention of parts during machining, assembly or testing. The distinction between holding and pressing force is important: the pressing force is the active contact load applied by the spindle, whereas the holding force represents the clamp’s capacity to withstand opposing loads. These characteristics support shorter cycle times and fewer re-clamps, contributing to measurable productivity gains in repetitive production tasks. Precise adjustment and reliable positioning Designed with a horizontal foot for straightforward bench or plate mounting, the unit includes an M12x80 pressure spindle that allows fine adjustment of clamping travel and force. The actuator uses a 20 mm piston, which balances compactness with a stable contact face; the result is predictable clamp behaviour and reduced set-up variation. Where fixture space is limited, the horizontal mounting arrangement simplifies integration and alignment with locating elements. Built for everyday workshop endurance The clamp’s zinc-plated cast body gives corrosion resistance and mechanical robustness for regular use in industrial environments. With a mass of 2.87 kg, the component is heavy enough to remain stable once fixed, yet light enough for handling during bench assembly and fixture configuration. The combination of coated cast material and engineered internals reduces maintenance intervals and supports long-term reliability in frequent clamping cycles. Straightforward integration into production workflows Compatibility with common fixture plates and the compact footprint make this model suitable for small-batch production and repair-shop applications alike. Identification data such as the SKU and GTIN enable easy ordering and inventory tracking, and the clamp’s mechanical specification supports rapid engineering checks during fixture design. For integration queries or to verify mounting details, consult Metav Werkzeuge for clear guidance on assembly and part matching. For fast supply and technical advice on the Kukamet push-rod clamp 532, contact Metav Werkzeuge in Emmerich: eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 532-5-Q20 GTIN: 8680731504484 Manufacturer: Kukamet Facts Weight: 2.87 kg Max. pressing force: 7,500 N Max. holding force: 18,450 N Piston diameter: 20 mm Special features Material: zinc-plated cast body Mounting: horizontal foot Pressure spindle: M12x80 eCl@ss: 21041716 ETIM: EC011973 FAQ How much clamping force does the push-rod clamp provide? The Kukamet push-rod clamp 532 offers a maximum holding force of 18,450 N and a maximum pressing force of 7,500 N for secure workpiece retention. Which mounting arrangement is required for the clamp? The clamp is fitted for horizontal-foot mounting; the horizontal foot enables stable anchoring on fixture plates and machine tables for repeatable positioning. What adjustment options are available on this model? Adjustment is provided via an M12x80 pressure spindle, permitting precise setting of the contact position and applied pressing force on the push-rod clamp 532. Is the clamp suitable for harsh workshop conditions? The zinc-plated cast body gives corrosion resistance and mechanical durability, making the clamp appropriate for regular use in industrial workshop environments. Where can the clamp be ordered or further technical details obtained? Technical enquiries and orders for the Kukamet push-rod clamp 532 (SKU 532-5-Q20) can be handled through Metav Werkzeuge, who can also advise on mounting and integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500N Push Rod Clamp, Horizontal Foot, Zinc-Plated Cast Body, Piston Ø20mm, Holding Force 18450N - Kukamet
Take advantage of robust clamping performance and durable construction to keep production running with minimal downtime; the combination of high holding force, galvanised cast-body durability and precise spindle adjustment ensures dependable results. Order through Metav Werkzeuge or consult the sales team for specification matching. Kukamet Schubstangenspanner 536 — push-pull rod clamp with 7,500 N clamping force The 536 push-pull rod clamp is a compact industrial clamp designed for repetitive fixture and holding tasks in workshop and production environments, offering a galvanised cast body and horizontal-foot mounting for secure installation Galvanised cast body Holding force 18,450 N Clamping force 7,500 N Horizontal foot mounting Consistent clamping power for reliable cycle times The clamp delivers a holding force of 18,450 N and a maximum clamping force of 7,500 N, making it suitable for high-demand fixture applications where repeatability matters. These values indicate the static retention and the active pressure the device applies during clamping; higher numbers translate into reduced slippage and longer-term stability on repetitive jobs. For production lines that require predictable part retention, the robust force figures contribute directly to reduced rework and improved throughput. Durable construction that reduces maintenance interruptions Constructed with a galvanised cast body, the unit resists corrosion and mechanical wear associated with daily use in industrial settings. The piston diameter of 20 mm provides compact actuation with reliable force transmission, while the moderate mass (approx. 2.87 kg) balances solidity with easy handling during installation. A cast chassis paired with protective galvanisation helps extend service intervals and lowers the likelihood of premature component replacement, supporting a steady and economical production flow. Flexible mounting and fine adjustment for precise setups The clamp features a horizontal foot mounting style for straightforward bench or fixture attachment and an M12 x 80 pressure spindle for fine clamping-distance adjustment. Horizontal-foot mounting allows the clamp to be positioned close to the workpiece and integrated into jigs with minimal interference. The threaded pressure spindle enables precise setting of the grip point and compensates for part tolerances, simplifying setup and reducing cycle time during changeovers. Contact Metav Werkzeuge today to discuss suitability for specific assembly tasks or to request detailed technical comparisons tailored to production requirements Technical Data SKU: 536-5-Q20 GTIN: 8682843521281 Manufacturer: Kukamet Facts Holding force: 18,450 N Clamping force (max): 7,500 N Piston diameter: 20 mm Weight: 2.87 kg Pressure spindle: M12x80 ECLASS: 21041716 ETIM: EC011973 Special features Galvanised with cast body Horizontal foot mounting Category: Spanner Mounting type: horizontal foot FAQ What materials is the clamp suitable for? The Kukamet push-pull rod clamp 536 is a mechanical clamping device; material compatibility depends on fixture design rather than the clamp itself. The clamp’s high holding force makes it appropriate for securing metal workpieces in machining and assembly jigs. How is the clamping force adjusted? Adjustment is performed via the M12 x 80 pressure spindle, allowing precise travel and contact pressure setting. The spindle permits fine-tuning of the grip point for different part thicknesses. What are the primary installation considerations? The clamp uses a horizontal-foot mounting arrangement; adequate support and correct orientation on the jig plate ensure optimal force transmission and long-term reliability. Is the product resistant to workshop conditions? Yes, the unit’s galvanised cast body offers enhanced corrosion resistance and mechanical durability appropriate for standard workshop and industrial environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 1000N Holding Force M5x35 Spindle Safety Lock Zinc Plated - Kukamet
The combination of a 750 N clamping force, 1,000 N holding capacity and a robust safety lock delivers dependable, space-saving workholding for jigs and fixtures; the zinc-plated finish extends service life in workshop conditions. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Vertikalspanner 212 – Vertical clamp with 750 N clamping force and safety lock (Kukamet) The Vertikalspanner 212 is a compact vertical clamp for reliable fixture and jig workholding in production and maintenance environments Zinc-plated corrosion protection 750 N clamping force 1,000 N holding capacity Safety lock for secure clamping Consistent, measurable clamping performance for production The vertical clamp provides a defined 750 N maximum clamping force and a 1,000 N holding capacity, values that translate into consistent fixture behaviour under repeat loads. These numeric characteristics mean faster set-ups and fewer process interruptions, making the device suitable for small-batch manufacturing and assembly stations where reproducible clamping pressure is required. The clear force specification supports process planning and risk assessment when integrating the clamp into fixtures and test rigs. Durable finish and compact installation save space and maintenance time Finished in zinc-plated steel, the unit resists corrosion and keeps maintenance intervals long even in humid workshop atmospheres. The vertical foot mounting enables a compact footprint on fixtures and plates, allowing closer packing of clamps in tight jigs. The lightweight construction (approx. 0.155 kg) supports easy handling and retrofitting without heavy mounting hardware. The fitted spindle (M5x35) provides standardised adjustment and simplifies replacement if required. Secure locking and safe handling for production environments Equipped with an integrated safety lock, the clamp prevents accidental release during handling and machining operations, reducing the risk of workpiece movement and downtime. The lever-clamp design offers rapid actuation combined with mechanical security, which supports safe routine use on shop floors and assembly benches. This security feature contributes to operator confidence and supports compliance with common workshop safety practices. Clear applications and simple integration into fixtures Designed for jig and fixture applications, the clamp suits assembly, welding fixtures and test benches where a stable vertical hold is needed. Its lever-style mechanism ensures quick clamping cycles while the precise force data aids in choosing appropriate counterparts and stop pins. For procurement and systems integration the compact format, quantifiable mechanical data and zinc protection simplify specification sheets and spare-part planning. For secure, safety-locked workholding from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and fast delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 212-1-L GTIN: 8680731501490 eClass: 21041717 ETIM: EC011973 Facts Clamping force max: 750 N Holding force max: 1,000 N Weight: 0.155 kg Spindle: M5x35 Special features Material: zinc-plated Mounting: vertical foot Safety lock: yes Arm: not applicable Style: lever clamp FAQ What is the maximum clamping force of the Vertikalspanner 212? The Vertikalspanner 212 delivers a maximum clamping force of 750 N, with a holding capacity of 1,000 N, suitable for many jig and fixture tasks. Is the clamp protected against corrosion? Yes, the unit is zinc-plated, providing enhanced corrosion resistance for workshop and light industrial environments. Can the clamp be mounted on existing fixture plates? The clamp uses a vertical foot mounting that permits integration into standard fixture plates and jigs; the M5x35 spindle offers standard fastener compatibility. Does the clamp include a safety mechanism? The Vertikalspanner 212 features an integrated safety lock to prevent accidental release during operation, improving process safety. Which applications are typical for this clamp? Typical uses include assembly fixtures, test rigs and welding jigs where compact, reliable vertical clamping is required; the lever-clamp style supports quick cycle times. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 1000N Holding Force Stainless Steel, Safety Lock - Kukamet
Take advantage of a compact clamp that combines stainless steel construction, a safety locking mechanism and a high holding capability to secure fixtures reliably; order the unit directly via Metav Werkzeuge or consult their specialists for specification advice. Vertikalspanner 212 — Vertical clamp with safety lock and stainless steel construction by Kukamet The Vertikalspanner 212 is a compact vertical clamp designed for secure fixture holding in production and assembly environments, offering a robust safety locking function and corrosion-resistant material. Stainless steel construction Built-in safety locking mechanism Vertical foot mounting for stability Clamping force up to 750 N Reliable clamping performance for repetitive production tasks This vertical clamp delivers consistent force for repetitive clamping operations, with a clamping force of 750 N and a holding force of 1,000 N specified to maintain workpiece position under load. The difference between clamping and holding values indicates the device’s rated closing force and its maximum static retention capacity; this distinction supports engineers when selecting the right component for fixtures subjected to vibration or side loads. The robust specification reduces rework and helps maintain cycle-time stability on production lines. Safety and handling designed to protect processes and operators A decisive mechanical safeguard is the integrated safety lock, which secures the lever in the closed position to prevent unintended release during machining or handling. The clamp’s vertical foot attachment provides a stable mounting interface, simplifying positioning on tooling plates or machine beds. For adjustments, the clamp is fitted with a contact spindle M5 x 35, allowing fine contact pressure settings without the need for special tools. These features together reduce the risk of accidental part movement and contribute to safer plant operation. Corrosion resistance and long service life in demanding environments Constructed from stainless steel, the clamp withstands humid and mildly corrosive workshop atmospheres better than zinc-plated alternatives, extending service intervals and lowering lifetime maintenance needs. The compact design and lightweight build make it suitable for fixtures where mass matters, while the durable material supports frequent cycles and cleaning. Choosing corrosion-resistant components is a pragmatic way to protect fixture investments and to ensure consistent part quality over time. Specification guidance for integration into assemblies The clamp is supplied as model S212-1-L and suits applications that require a locked vertical toggle solution for medium loads. Its compact footprint and clear numerical ratings simplify CAD integration and bill-of-materials (BOM) entries. For selection, compare the rated 750 N clamping force with the required clamping torque and expected process loads; if fixtures must resist lateral forces or high-impact events, consider supplementary locating elements in addition to the clamp. Metav’s guidance helps align component choice with production requirements. Specify the Kukamet vertical clamp S212-1-L with confidence — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and technical assistance Technical Data Article number: S212-1-L GTIN: 8680731509199 Manufacturer: Kukamet Brand: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Clamping force (max): 750 N Holding force (max): 1,000 N Weight: 0.155 kg Contact spindle: M5 x 35 Special features Material: stainless steel Mounting type: vertical foot Safety locking mechanism: yes Arm: not applicable Storytrigger: toggle clamp FAQ What clamping capacity does this vertical clamp provide? The clamp offers a clamping force up to 750 N and a holding capacity of 1,000 N, which is suitable for moderate-duty fixture tasks with consistent retention requirements. Is the clamp suitable for use in humid or corrosive workshop environments? Yes, the stainless steel construction of the vertical clamp provides improved corrosion resistance compared with plated alternatives, supporting longer service life in such conditions. How is the clamp adjusted and fixed in position? Adjustment is performed via the contact spindle (M5 x 35), and the integrated safety locking mechanism secures the lever in the closed position to prevent accidental release. Can the clamp be mounted on tooling plates or machine beds? The clamp is designed for vertical foot mounting, enabling stable attachment to tooling plates, fixtures and machine beds where a vertical toggle action is required. What is the exact model designation for ordering? Order the unit under SKU S212-1-L; the product is supplied as a compact vertical clamp from Kukamet with the described safety and material features. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 1000N Holding Force, Angle Base, Safety Lock, Black Oxide Finish - Kukamet
Take advantage of a compact clamp that combines 750 N clamping force with a safety lock for secure part retention and predictable cycle performance; its angle-base mounting and lightweight design simplify fixture retrofits. Order the unit directly via Metav Werkzeuge or consult our team for integration advice. Vertical toggle clamp 213 by Kukamet — 750 N clamping force, safety lock A vertical toggle clamp 213 designed for secure vertical clamping in fixtures and jigs, offering a compact lever-style solution for assembly and production work Safety lock for secure locking 750 N clamping force 1000 N holding capacity Angle-base mounting for stable installation Consistent holding and controlled clamping force The clamp delivers a defined 750 N clamping force, ensuring repeatable part fixation and reduced rework in serial production. The integrated safety lock prevents unintended release during handling or machine cycles, which helps maintain process stability and minimises downtime. In practice, the clearly stated clamping value supports planning of fixture layouts and force budgets in jigs and assembly stations. Compact mounting and easy retrofitting With an angle-base mounting and a M5 x 35 spindle, the unit is built for simple integration into existing fixtures. Its low mass (approx. 0.17 kg) and compact lever geometry allow installation where space is limited, saving load space on the workpiece and facilitating quick retrofit operations. The standard spindle thread permits straightforward adjustment and replacement using common tooling. Workshop-ready finish for durable use The component features a blackened finish that gives the surface enhanced resistance to everyday workshop wear and minor corrosion compared with unfinished steel. The lever-style design is robust and requires minimal maintenance; occasional lubrication of the pivot points preserves smooth operation and extends service life. This makes the clamp suitable for high-frequency cycles in manufacturing and assembly environments. Integration into fixtures and increased process reliability As a lever clamp, the product combines a positive locking action with a 1000 N holding force, providing safety margin for many clamping applications. Its compact footprint supports dense fixture layouts and automated tooling where secure vertical hold is required. The result is a practical improvement in throughput and operator confidence, as parts remain precisely located throughout machining or assembly steps. Contact Metav Werkzeuge to discuss how the Kukamet vertical toggle clamp 213 can be specified for existing fixtures and to arrange prompt delivery from Emmerich Technical data SKU: B213-1-L GTIN: 8680731507959 Manufacturer: Kukamet Core technical values Weight: 0.17 kg Max clamping force: 750 N Max holding force: 1000 N Spindle: M5 x 35 mm eClass: 21041717 ETIM: EC011973 Special features Angle-base mounting (Winkelfuß) Safety lock integrated Lever clamp design Blackened finish (Schwarz brüniert) Designation: vertical clamp 213 FAQ What clamping force does the clamp provide? The Kukamet vertical toggle clamp 213 provides a clamping force of 750 N and a holding capacity of 1000 N for secure part retention. How is the clamp mounted to a fixture? Mounting is via an angle base; the clamp is designed for stable installation on angled or flat fixture surfaces using the supplied fixing pattern. What spindle specification is used for adjustment? Adjustment is made with an M5 x 35 mm spindle, allowing fine setting of the pressure point and straightforward replacement. Is the clamp suitable for high-frequency production use? Yes, the lever-style construction and durable blackened finish make the unit suitable for repeated cycles in assembly and production settings. What is the item number or SKU for ordering? The product is listed as SKU B213-1-L (vertical toggle clamp 213) for ordering and inventory management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 1000N Holding Force, M5x35 Spindle, Blackened Finish - Kukamet
Compact, adjustable clamping performance combined with a corrosion-resistant finish and a low mass makes this device ideal for light-duty fixtures; order the Vertical clamp 212 (B212-1) directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 212 (B212-1) — Kukamet, 1,000 N holding force Vertical clamp 212 (B212-1) designed for vertical mounting in jigs and light assembly fixtures, offering a compact footprint and precise adjustment with an M5x35 pressure spindle 1,000 N holding force 750 N clamping force Adjustable pressure spindle M5x35 Blackened finish, 0.155 kg weight Dependable holding power for light fixtures The clamp delivers a clear performance profile: a holding force of 1,000 N and a clamping force of 750 N, enabling secure retention of workpieces in assembly and jigging operations. The distinction between holding and clamping force is important for fixture design: the higher holding value indicates the device’s resistance to separation once engaged, while the clamping figure describes the maximum compressive force applied. These figures support rational decision-making when selecting a small, robust clamping element for production or repair work, helping to minimise rework and downtime. Space-saving design with fine adjustment A low mass of 0.155 kg and a compact base make the unit simple to integrate into constrained setups. The pressure spindle M5x35 allows fine height adjustment so that variable part tolerances can be compensated without additional shims. The clamp is supplied with a vertical foot mounting, which simplifies upright installation on jigs and fixture plates. Surface protection is provided by a blackened finish, which reduces visible wear and provides basic corrosion resistance while keeping the visual impact minimal. Practical suitability and workshop reliability Designed for everyday workshop use, this clamping device combines straightforward functionality with robust performance metrics, making it suitable for small-batch production, prototyping and maintenance fixtures. The compact and adjustable nature supports repeatable set-up routines, improving cycle consistency. Supplied under the Kukamet designation and stocked for prompt dispatch, the product benefits from Metav’s established supply chain and quality filter in Emmerich, which enhances availability and reduces procurement complexity for the workshop. For ordering or detailed technical questions about the Kukamet vertical clamp 212 (B212-1), contact Metav Werkzeuge in Emmerich by e‑mail or phone to consult our product specialists and ensure correct integration into existing fixtures Technical data SKU: B212-1 GTIN: 8680731505405 eClass: 21041717 ETIM: EC011973 Facts Holding force max: 1,000 N Clamping force max: 750 N Weight: 0.155 kg Pressure spindle: M5x35 Design & features Material / finish: blackened (Schwarz brüniert) Mounting: vertical foot Special features: none Category: clamp FAQ What holding and clamping forces does the device provide? The Vertical clamp 212 (Kukamet B212-1) offers a holding force of 1,000 N and a clamping force of 750 N, suitable for light-duty fixture retention. How is the clamp mounted on a fixture? Mounting is via a vertical foot, designed for upright attachment to fixture plates and jig bases. Is height adjustment possible for different workpiece tolerances? Yes, the pressure spindle M5x35 provides fine height adjustment to adapt to varying part dimensions. What surface protection does the clamp use? A blackened finish (Schwarz brüniert) gives basic corrosion resistance and a uniform appearance for workshop environments. Which applications suit this clamp best? The clamp is intended for jigs, small assembly fixtures and light production or maintenance tasks where compact, adjustable holding is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 138mm Arm, Massive Holding Arm with Safety Lock, Blackened Finish - Kukamet
Combining a compact 138 mm arm with a massive holding arm and a safety locking mechanism ensures reliable, repeatable clamping in small fixtures; benefit from a low overall weight and clearly defined clamping and pressing forces for consistent production. Order directly via Metav Werkzeuge or consult our advisers for integration advice. Vertical Toggle Clamp 213 – sturdy holding arm and safety lock (Kukamet) The Vertical Toggle Clamp 213 is a compact vertical clamp designed for secure workpiece retention in fixtures, jigs and assembly aids, offering defined clamping and pressing forces for small-scale industrial applications Massive holding arm with safety lock Compact 138 mm arm length Max holding force 1,000 N Blackened finish, lightweight 0.15 kg Secure, measurable clamping for reliable cycles The clamp delivers defined performance values with a max holding force of 1,000 N and a max pressing force of 750 N, which supports predictable fixture behaviour and cycle planning. Translating these figures into workflow terms, the component provides consistent workpiece retention under repeat operations, reducing rework caused by shifting parts. The compact footprint and precise force ratings enable straightforward process documentation and integration into existing production routines, contributing to greater throughput stability without complex setup. Robust design reduces maintenance and downtime A massive holding arm combined with a safety locking mechanism gives mechanical security during handling and machining operations. The clamp’s blackened finish offers surface protection while keeping the unit lightweight at 0.15 kg, which lowers the static load on jigs and makes handling during assembly easier. The angled base mount (Winkelfuß) is intended for fixed installation on plates and fixture frames, enabling fast, repeatable positioning. Components are designed for low-maintenance operation, so routine checks focus on hinge lubrication and lock engagement rather than frequent part replacement. Built for workshop practicality and productive setups This vertical toggle model suits workshop and light-production environments where compact, repeatable clamping is required. The short arm length of 138 mm supports space-saving fixture layouts while the clearly stated force values simplify selection for specific tasks. The mechanical safety lock prevents accidental opening, improving operator confidence and reducing interruption. Lightweight construction and a simple mounting concept allow fast retrofitting into existing jigs, making the clamp a pragmatic choice for assembly, testing and small-series manufacturing where reliability and ease of use are priorities. Contact Metav Werkzeuge to discuss how the Vertical Toggle Clamp 213 from Kukamet can be integrated into existing fixtures; our Emmerich-based team will provide practical advice and delivery options. Technical Data Article number: B213-1-D-L-C3 SKU: B213-1-D-L-C3 Manufacturer: Kukamet Type designation: Vertikalspanner 213 eClass: 21041717 ETIM: EC011973 Facts Arm length: 138 mm Max pressing force: 750 N Max holding force: 1,000 N Weight: 0.15 kg Special features Massive holding arm and safety locking mechanism Mounting type: angled base (Winkelfuß) Finish: blackened (Schwarz brüniert) Catalogue page: 211-212-213-l-katalogseite.pdf FAQ How much holding force does the clamp provide? The Vertical Toggle Clamp 213 offers a maximum holding force of 1,000 N, giving measurable retention suitable for many light industrial fixtures. Is the clamp suitable for compact fixture layouts? Yes, the 138 mm arm length of the Kukamet vertical clamp is designed for space-saving installations and tight jig arrangements. What mounting method is used for attachment? The unit is supplied for installation with an angled base mount (Winkelfuß), allowing secure fixation to fixture plates and frames. Does the clamp include a safety mechanism to prevent accidental release? A mechanical safety locking mechanism is integrated to prevent unintended opening, enhancing process safety during handling and machining. What is the surface treatment and how does it affect use? The clamp features a blackened finish, which provides surface protection while keeping the component lightweight for easy handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 138mm Arm, Massive Holding Arm with Safety Lock, Galvanised - Kukamet
Take advantage of a compact, corrosion-resistant clamping solution: a zinc-plated construction with a 138 mm arm delivers stable workholding with up to 1,000 N holding force while the integrated safety lock and robust arm ensure secure operation; order the unit directly via Metav Werkzeuge or consult our specialists for technical advice. 213 Vertical clamp by Kukamet — zinc-plated, 1,000 N holding force The 213 Vertical clamp is a compact, zinc-plated clamping device designed for secure workholding in jigs, fixtures and light assembly applications. Zinc-plated finish for corrosion resistance 138 mm compact holding arm Up to 1,000 N holding force Integral safety lock and robust arm Stable clamping in compact fixtures for reliable production The clamp is designed to provide a dependable clamping solution where space is limited. The 138 mm arm and lightweight build (approx. 0.15 kg) make it suitable for tight jigs and rapid-change fixtures while maintaining a high holding force. The relationship between the 750 N actuation force and the 1,000 N holding force means the device converts operator or actuator input into a secure grip on the workpiece; this ensures consistent repeatability across assembly cycles and reduces rework caused by slippage. The zinc-plated finish adds corrosion resistance, extending service life in workshop environments. Easy mounting and secure operation to reduce downtime An angle base mounting simplifies installation on fixture plates and welded frames, enabling quick integration into existing production setups. The clamp’s robust arm and safety lock provide mechanical security once set, preventing unintended release during handling or machining. This mechanical interlock is particularly beneficial for automated or semi-automated lines where loss of clamp position would halt production. The compact lever-clamp design supports fast actuation and straightforward maintenance, creating operational efficiencies on the shop floor. Durable design that supports consistent throughput and peace of mind Constructed with durable materials and a solid holding arm, the unit is built to withstand repetitive cycles typical of industrial use. Reduced maintenance demands and a corrosion-resistant coating contribute to a lower total cost of ownership by keeping fixtures operational for longer periods. The clamp’s straightforward mechanics make inspection and replacement simple, which helps to preserve throughput and schedule reliability. For buyers seeking a pragmatic, well-engineered clamping element, the combination of mechanical strength and compact form factor supports both performance and confidence in daily operations. For supply information or application guidance for the Kukamet 213, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, expert assistance. Technical data SKU: 213-1-D-L-C3 GTIN: 8682843520338 Manufacturer: Kukamet Weight: 0.15 kg Arm length: 138 mm Material finish: Zinc-plated Core values Holding force: 1,000 N Actuation/closing force: 750 N ECLASS: 21041717 ETIM: EC011973 Special features Angle base mounting Robust holding arm (massive arm) Integral safety lock (Sicherheitsverriegelung) Lever-clamp type (hebelspanner) FAQ Is the 213 suitable for fixture and jig use? Yes. The 213 Vertical clamp by Kukamet is designed for jigs, fixtures and light assembly tasks where a compact, reliable clamping element is required. What mounting method does the clamp use? The clamp is supplied with an angle base mounting, enabling straightforward attachment to fixture plates and frames. How much clamping force is available? The device provides up to 1,000 N holding force with a 750 N actuation force rating for the clamping mechanism. Does the clamp include a safety feature to prevent accidental release? Yes. The 213 includes a robust holding arm and an integrated safety lock to secure the clamp in the closed position. What finish and materials are used to ensure longevity? The clamp features a zinc-plated finish for corrosion resistance and a solid holding arm designed for repetitive industrial use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 38mm Arm, Massive Holding Arm with Safety Lock, Black Oxide Finish - Kukamet
Take advantage of robust clamping with a 38 mm solid holding arm, combined with a safety latch and an angle base for flexible mounting; the result is reliable vertical workholding with low weight for easy integration. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants for application advice. Vertical clamp 213 by Kukamet — 38 mm arm, safety latch Vertical clamp 213 is a compact vertical clamping device designed for secure workholding in jigs and fixtures across light to medium-duty production environments. Solid 38 mm holding arm Safety latch for reliable locking Angle base for flexible mounting Up to 1,000 N holding force Secure holding for repetitive production tasks The clamp delivers consistent clamping performance through a massive holding arm that resists bending and wear, ensuring reproducible results in repetitive operations. The combination of a substantial arm and a positive safety latch reduces the risk of accidental release, which improves process reliability and lowers scrap rates. This makes the clamp particularly suitable for small fixtures, test rigs and assembly stations where secure, repeatable retention is essential. Simple integration and space-saving mounting With an angle base fixation and a compact footprint, the device integrates smoothly into benches, modular fixturing systems and machine tables. The 38 mm arm length allows close-proximity clamping without obstructing adjacent tooling, while the low mass of 0.15 kg minimises added load on moving subassemblies. The blackened finish gives corrosion resistance and a neutral appearance that matches industrial environments, helping to maintain a tidy and durable work area. Clear technical properties that aid planning Key numerical values support planning and comparability: holding force 1,000 N and clamping force 750 N define application limits and inform cycle speed and clamp spacing. The compact construction and defined mounting style enable straightforward CAD accommodation and predictable dynamic behaviour during automated sequences. For workshops seeking economical, robust components, the clamp offers a transparent balance of performance and ease of use. For secure and economical vertical workholding, request the Kukamet Vertical clamp 213 via Metav Werkzeuge or contact our specialists at Metav Werkzeuge for tailored installation support and technical data: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: B213-1-D-L-C1 Manufacturer: Kukamet SKU: B213-1-D-L-C1 eClass: 21041717 ETIM: EC011973 Facts Arm diameter/width: 38 mm Maximum holding force: 1,000 N Maximum clamping force: 750 N Weight: 0.15 kg Special features Angle base mounting Massiver Haltearm und Sicherheitsverriegelung (massive holding arm and safety latch) Finish: blackened FAQ What materials is the clamp suitable for? The Vertical clamp 213 by Kukamet is intended for general workshop use; material-specific suitability depends on fixture design and clamping parameters rather than the clamp itself. How much clamping and holding force does this clamp provide? The Kukamet Vertical clamp 213 offers up to 750 N clamping force and 1,000 N holding force (SKU B213-1-D-L-C1), values that help define safe workpiece sizes and spacing. Can the clamp be mounted directly to a modular fixture plate? Yes, the angle base and compact footprint allow direct mounting to fixture plates and machine tables for streamlined integration in jigs and assembly stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 44mm Arm, Massive Holding Arm with Safety Lock, Blackened Finish - Kukamet
Take advantage of the 44 mm arm, up to 750 N clamping force and integral safety locking for dependable, repeatable workholding; compact design and a horizontal mounting foot simplify fixture integration. Order the clamp directly via Metav Werkzeuge or ask the Metav consultants for application advice. Vertical clamp 211 — Kukamet vertical clamp with 44 mm arm and safety lock The Vertical clamp 211 is a robust workholding device for fixtures and jigs, combining a compact 44 mm arm with a horizontal mounting foot for secure, space-saving installation. Compact 44 mm arm for tight setups High clamping force up to 750 N Integral safety locking mechanism Blackened finish for discreet protection Secure, measurable clamping for reliable production The clamp delivers a clear performance advantage through its defined force ratings: 750 N maximum clamping force and a holding force of 1,000 N, values that support predictable clamping behaviour and repeatable fixture cycles. The short 44 mm arm minimises intrusion into the working area while the compact weight of 155 g keeps the overall fixture light. These objective data points reduce setup time and help to standardise process parameters in batch production or repetitive assembly tasks. Robust construction and safe operation reduce downtime A massive holding arm and a dedicated safety locking feature prevent accidental release during machining or handling, lowering the risk of rework and workplace incidents. The clamp uses a lever-style action for rapid engagement and release, enabling faster clamping cycles compared with screw actuated alternatives. The blackened finish offers a practical protective layer that reduces glare and blends into a workshop environment while preserving the metal surface against light abrasion. Easy integration into fixtures with low maintenance needs Mounting is straightforward using the horizontal mounting foot, which suits bench fixtures, jigs and production sleds where a vertical toggle is required. Minimal routine maintenance — periodic lubrication of the pivot and a quick inspection of the lock — keeps the clamp operational for long service intervals. The compact design and solid build make this clamp suitable for constrained spaces and modular fixture systems, providing consistent clamping without adding unnecessary bulk. For specialised setups or bespoke fixture advice, the Kukamet clamp is a reliable component in professional workholding assemblies. Contact Metav Werkzeuge for tailored fixture recommendations and secure the Kukamet Vertical clamp 211 for precise, repeatable workholding in your workshop. Technical Data Article number: B211-1-D-L-C1 Brand: Kukamet Category: Spanner eClass: 21041717 ETIM: EC011973 Key figures Arm: 44 mm Maximum clamping force: 750 N Maximum holding force: 1,000 N Weight: 0.155 kg Special features Mounting: horizontal foot Finish: blackened finish Massive holding arm Safety locking mechanism Lever-style operation SKU: B211-1-D-L-C1 FAQ What maximum force can the clamp provide? The clamp offers a maximum clamping force of 750 N and a holding force of 1,000 N as specified for the Vertical clamp 211. How is the clamp mounted? The device is fitted via a horizontal mounting foot, designed for secure attachment to fixtures and jigs. Does the clamp include a safety mechanism? Yes, the Vertical clamp 211 features an integrated safety locking system to prevent unintended release during operations. What maintenance is required to keep the clamp reliable? Routine maintenance includes lubrication of pivot points and periodic checks of the safety locking and lever function to ensure consistent operation. Is the clamp suitable for compact fixtures? The short 44 mm arm and light weight (0.155 kg) make this clamp well suited to compact and modular fixture designs. Manufacturer: Kukamet; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 44mm Arm, Solid Holding Arm with Safety Lock, 1000N Hold Force - Kukamet
Taking advantage of a robust 44 mm arm, 750 N clamping force and a space-saving vertical foot mount secures reliable workholding in jigs and fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 212 — vertical clamp with 44 mm arm and safety lock (Kukamet) The Vertikalspanner 212 is a compact vertical clamp designed for secure workpiece retention in jig, fixture and assembly applications where a low profile and dependable locking are essential. Massive holding arm with safety lock Vertical foot mount for compact installation Clamping force up to 750 N, holding force 1,000 N Blackened finish, robust construction Reliable clamping performance for repeatable production The 212 model delivers measured performance through its defined clamping force and holding force, offering up to 750 N and 1,000 N respectively. These figures indicate the device’s capacity to generate and maintain pressure during processing and handling, which translates into fewer re-clamps and steadier throughput on production lines. The specification-driven design reduces setup variability and supports consistent part quality in small-batch and series production. Compact mounting that saves fixture space Designed for vertical mounting with a vertical foot, the clamp occupies minimal lateral space on fixtures and jigs. The compact footprint paired with a 44 mm arm allows integration into tight assemblies and tool stations where access and clearance are limited. This combination supports denser fixture layouts and can shorten cycle times by allowing multiple clamps to be positioned close to the workpiece without interference. Safety and durability engineered into the mechanism A massive holding arm and integrated safety lock provide mechanical reliability and user confidence during repetitive operations. The safety lock prevents accidental release under vibration or when the clamp is loaded, lowering the risk of workpiece displacement. Construction in a blackened finish enhances surface resistance to wear and provides a protective layer against handling marks in workshop environments. Simple specification that aids selection and maintenance With straightforward, measurable properties such as arm size, forces and mass, the clamp is easy to specify in bill of materials and tooling lists. The low mass supports quick manual positioning during setup, while the clear numeric ratings help engineering teams select the right component for expected loads. Where higher durability is required, the robust build and finish provide a basis for predictable lifetime performance. Ideal for jigs, fixtures and assembly benches The clamp’s profile and locking features make it suitable for repetitive assembly tasks, soldering fixtures, and light machining jigs where secure holding without bulky fixtures is required. The combination of compact mounting, defined force ratings and mechanical locking improves operator efficiency and contributes to predictable process outcomes in workshop and light industrial environments. For reliable clamping solutions from a trusted supplier, contact Metav Werkzeuge to specify the Kukamet 212 vertical clamp for your fixture needs and request application guidance from our technical advisors Technical Data Article number: B212-1-D-L-C1 Manufacturer: Kukamet Model: 212 Category: Spanner eClass: 21041717 ETIM: EC011973 Facts Arm: 44 mm Maximum clamping force: 750 N Maximum holding force: 1,000 N Weight: 0.125 kg Special features Massive holding arm Safety lock Vertical foot mounting Finish: blackened FAQ What is the maximum clamping force of this clamp? The Kukamet Vertikalspanner 212 provides a maximum clamping force of 750 N and a holding force rated at 1,000 N for stable part retention. How is the clamp mounted in a fixture? Mounting is via a vertical foot; the 44 mm arm and compact base suit tight fixture geometries where a low profile attachment is required. Is the mechanism secured against accidental release? Yes, the clamp features a safety lock and a massive holding arm to reduce the risk of unintended opening under vibration. What finish is applied to the clamp and what does it provide? The component is supplied with a blackened finish, offering surface protection and a robust appearance suitable for workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 94mm Arm, Heavy-Duty Hold With Safety Lock, Zinc-Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamping solution that combines a galvanised construction, a 94 mm massive holding arm and a positive safety lock for reliable, repeatable workholding. Order the Vertical Clamp directly via Metav Werkzeuge or contact our specialists for application advice. Vertical Clamp 211 — Kukamet with 94 mm heavy-duty arm and safety lock A robust vertical clamp designed for secure bench mounting and short-cycle workholding in metalworking and general workshop settings. Robust galvanised construction 94 mm massive holding arm Horizontal-foot mount for bench attachment Positive safety lock for secure clamping Built for reliable clamping and repetitive tasks The Vertical Clamp 211 delivers dependable clamping for frequent operations thanks to its massive holding arm and compact footprint. The galvanised finish provides basic corrosion resistance, reducing maintenance needs in everyday workshop environments. With a clear focus on mechanical reliability, the design supports steady results when used for short, repetitive clamping cycles, improving process consistency and reducing rework. Secure mounting and safe operation A horizontal foot base enables stable bench or fixture attachment, translating clamp force into secure part retention. The integrated safety lock prevents accidental release during handling and machining, supporting safe workflows. For process planners, the positive locking mechanism reduces the risk of workpiece displacement, which benefits quality control and decreases the probability of scrap. Compact and efficient for tight workspaces Weighing only 0.155 kg, this clamp provides a high strength-to-weight ratio that keeps workstations uncluttered. The combination of a 94 mm arm and compact dimensions allows versatile placement close to tooling or jigs, saving space without sacrificing performance. The restrained mass reduces inertia during handling, making the clamp suitable for fixtures where quick manual adjustments are required. Suitable applications and material handling Designed for general workshop use, the clamp’s galvanised steel construction and mechanics are appropriate for holding ferrous and non-ferrous components during assembly, inspection and light machining tasks. The mechanical ratings support use in fixtures where a 750 N pressing force and up to 1,000 N holding force are sufficient for stable part retention, making it a practical choice for small-batch production and prototyping. Contact Metav Werkzeuge for availability, technical clarification or tailored clamping recommendations for Kukamet products; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 211-1-D-L-C2 GTIN: 8680731509960 Model: 211 Manufacturer: Kukamet EClass: 21041717 ETIM: EC011973 Facts Arm length: 94 mm Weight: 0.155 kg Max pressing force: 750 N Max holding force: 1,000 N Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm Safety lock Compact design FAQ What is the maximum holding force of the clamp? The Vertical Clamp 211 provides a maximum holding force of 1,000 N and a pressing force of 750 N for secure workholding. Which mounting method is required for installation? The clamp is designed for bench attachment using its horizontal foot for stable fixing to a workbench or fixture. What material is the clamp made from? The clamp features a galvanised steel construction that offers basic corrosion resistance for workshop environments. Is the clamp suitable for small-batch production and fixtures? Yes, the compact dimensions and robust arm make the device suitable for fixtures, prototyping and short production runs where reliable repetitive clamping is needed. How can I identify the exact item when ordering? Refer to the article number 211-1-D-L-C2 or GTIN 8680731509960 when specifying the Kukamet vertical clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 94mm Arm, Massive Holding Arm & Safety Latch, Horizontal Base - Kukamet
Combine a compact 94 mm arm, a 1,000 N holding force and a robust safety lock to secure repetitive production tasks. The durable blackened finish and lightweight design ensure straightforward integration into fixtures. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 211 — compact vertical clamping device with 94 mm arm and 1,000 N holding force (Kukamet) The Vertical clamp 211 is a compact vertical clamping device for workshop and light industrial fixtures, featuring a solid holding arm and an integrated safety lock for repeatable securing of workpieces Solid 94 mm holding arm and safety lock Up to 1,000 N holding force Horizontal base for stable mounting Blackened finish for corrosion resistance Consistent clamping performance in confined spaces This vertical clamping device delivers a predictable combination of holding force and pressing force, with a maximum holding capacity of 1,000 N and a pressing force of 750 N. The defined separation between holding and pressing values allows planners to design jigs where retention and clamping pressure are treated independently: the retention rating prevents part movement during operations, while the pressing rating denotes the achievable clamp pressure. The 94 mm arm provides a good lever length for manual actuation without adding bulk, and the low mass of 0.155 kg keeps the fixture lightweight for easy handling. The blackened finish contributes to wear resistance and reduces visible corrosion in everyday workshop environments. Secure mounting and reduced downtime through mechanical safety A horizontal base enables a stable footprint for bench or plate mounting, while the massive holding arm and integrated safety lock significantly lower the risk of accidental release under vibration. For production cells and assembly benches this translates into fewer interruptions and less rework: once engaged, the latch maintains position until deliberately released, which is particularly advantageous in repetitive hand-assembly or test applications. The clamp’s compact frame simplifies retrofitting into existing tooling plates where space is restricted, delivering dependable clamping without complex adaption. Ready for fixtures, jigs and small-series assembly The design is suited to fixtures, holding devices and small-series manufacturing where repeatability and quick manual operation matter. The combination of robust mechanics and compact dimensions supports ergonomic handling in assembly tasks and quick changeovers on test benches. The unit’s surface finish and solid construction favour long service intervals, decreasing replacement frequency and supporting a sustainable workshop approach through durable components and low maintenance requirements. For secure, compact clamping from Kukamet, contact Metav Werkzeuge for technical advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B211-1-D-L-C2 Manufacturer: Kukamet Facts Arm length: 94 mm Max pressing force: 750 N Max holding force: 1,000 N Weight: 0.155 kg ECLASS: 21041717 ETIM: EC011973 Special features Horizontal base mounting Massive holding arm Safety lock Material: blackened finish FAQ What is the difference between the pressing and holding forces? The pressing force (750 N) describes the clamp’s achievable clamping pressure, while the holding force (1,000 N) indicates retention strength against displacement; both values apply to the Vertical clamp 211 from Kukamet. Can the clamp be mounted on a horizontal plate? Yes. The clamp is supplied for horizontal base mounting and is intended for stable fixation on bench plates and fixture boards. Is the clamp suitable for repetitive manual operation? The solid holding arm and safety lock are designed for frequent manual actuation, offering reliable repeatability for jigs and small-series assembly. What surface treatment does the clamp have? The clamp is finished with a blackened finish, providing enhanced resistance to wear and a degree of corrosion protection appropriate for workshop environments. How much does the clamp weigh and does that affect mounting? With a weight of 0.155 kg, the device is lightweight, simplifying mounting and reducing additional load on fixture plates Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp With 1000N Holding Force, Horizontal Foot, M5x35 Pressure Spindle - Kukamet
Compact, reliable clamping with a 1,000 N holding force and a 750 N clamping force, supplied in a space-saving 0.155 kg body with horizontal-foot mounting for simple fixture integration. Order the 211 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 211 Vertical clamp — Kukamet, 1,000 N holding force, horizontal foot The 211 vertical clamp is a compact vertical hold-down designed for production jigs and workshop fixtures, providing dependable, repeatable clamping for small- to medium-sized workpieces. Horizontal-foot mounting for stable installation 1,000 N holding force for secure retention 750 N clamping force for firm workpiece pressure Blackened finish for a durable surface Secure holding for repeatable machining The combination of a 1,000 N holding force and a 750 N clamping force ensures stable retention in machining and assembly fixtures. These measurable values describe two distinct effects: the holding force indicates the static retention capacity of the clamp, while the clamping force refers to the downward pressure applied to the workpiece by the spindle. The compact construction and low mass of 0.155 kg reduce load on moving fixtures and permit close packing of multiple clamps on a single jig, supporting consistent, repeatable operation without excessive bulk. Easy mounting and fine adjustment for precise alignment Equipped with a horizontal foot for mounting, the clamp installs quickly on flat fixture plates or baseboards and aligns with common jig layouts. The M5x35 pressure spindle allows fine height adjustment and compensates for workpiece irregularities, enabling accurate contact without additional shims. The blackened finish provides a modest protective layer and a subdued aesthetic that reduces glare and visual distraction at the workbench, while the simple geometry of the device facilitates straightforward replacement and low-maintenance operation. Practical benefits for workshop throughput Designed for straightforward integration into clamping systems, this vertical hold-down supports faster set-ups and reduced rework. The robust mechanical values and compact form factor contribute to lower cycle times and improved process reliability in repetitive tasks. Beyond technical performance, the product delivers predictable behaviour in series production and small-batch work, helping maintain quality standards across multiple operators and shifts. Contact Metav Werkzeuge to discuss deployment of the Kukamet 211 vertical clamp and secure reliable clamping for production fixtures — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: B211-1 GTIN: 8680731503807 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Clamping force (max): 750 N Holding force (max): 1000 N Weight: 0.155 kg Pressure spindle: M5x35 Special features Horizontal-foot mounting Blackened finish Arm: Not applicable No special additional features FAQ What types of fixtures suit this clamp? The Kukamet 211 vertical clamp is intended for jigs and fixtures where a compact vertical hold-down with a horizontal foot is required, such as assembly benches and small machining fixtures. Can the clamping pressure be adjusted? Yes. Adjustment is achieved via the M5x35 pressure spindle; the 211 vertical clamp enables fine tuning of contact pressure and compensation for variable workpiece heights. Is the clamp corrosion-resistant? The clamp has a blackened finish that provides basic surface protection; for aggressive environments additional corrosion protection should be considered. How much holding force does the device provide? The device specifies a holding force of 1,000 N and a clamping force of 750 N, offering clear benchmarks for fixture design and safety margins. Which SKU should be ordered for this item? Order SKU B211-1 for the Kukamet 211 vertical clamp; this identifier corresponds to the standard configuration described above. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp With 1000N Holding Force, Zinc Plated, Vertical Base - Kukamet
Take advantage of a compact, galvanised lever clamp offering 750 N clamping force and 1,000 N holding capacity for reliable workholding; its M5x35 pressure spindle and vertical-foot mounting enable quick integration into fixtures. Order the Vertical Clamp 212 directly via Metav Werkzeuge or consult our specialists if needed. Vertical Clamp 212 — Vertical lever clamp with 750 N clamping force (Kukamet) The Vertical Clamp 212 is a compact vertical lever clamp designed for secure upright workholding in jig and fixture applications across production and workshop environments. Galvanised finish for corrosion resistance 750 N maximum clamping force 1,000 N holding force capacity M5x35 adjustable pressure spindle Vertical-foot mounting for upright installation Consistent clamping performance in compact form The Vertical Clamp 212 combines a compact construction with measurable power: a maximum clamping force of 750 N and a holding capacity of 1,000 N. These figures translate into dependable restraint of workpieces during assembly and machining operations, reducing repositioning and rework. The light overall mass of approximately 0.155 kg supports installations where space and weight are critical without compromising stability. By specifying clamping and holding values, selection and comparability become objective: the clamp performs predictably under known loads, which simplifies integration into fixtures and repeatable processes. Durable galvanised body for workshop resilience A galvanised surface treatment provides robust protection against condensation and common workshop contaminants, extending service life in demanding environments. Galvanisation minimises surface corrosion and reduces maintenance cycles, supporting continuous operation in production settings. The corrosion-resistant finish also preserves mechanical tolerances and contact surfaces, ensuring the clamp maintains repeatable positioning over time. For buyers seeking low-maintenance components that withstand routine exposure, the protective coating represents a clear operational advantage. Fast adjustment and simple mounting for efficient setup Equipped with an M5x35 pressure spindle, the clamp allows for fine adjustment of contact pressure and compensates for workpiece tolerances, enabling swift set-up and secure contact without auxiliary shims. The vertical-foot mounting is specifically designed for upright attachment to plates and fixtures, simplifying alignment in vertical assemblies and saving assembly time. These design choices reduce fixture complexity and support faster changeovers, which improves overall throughput in batch and small-series production. Practical suitability and integration guidance This lever clamp is conceived for modular fixtures, jigs and assembly stations where a reliable, repeatable vertical clamp is required. The straightforward mechanical design supports standard workshop maintenance and inspection routines, while the measurable parameters help quality planning and load calculations. For applications that demand a compact clamp with predictable force characteristics and corrosion protection, the 212 model provides an efficient balance of performance and simplicity. For purchase or technical advice about the Kukamet Vertical Clamp 212, contact Metav Werkzeuge for tailored guidance and reliable supply from Emmerich Technical data Article number: 212-1 GTIN: 8680731501476 Manufacturer: Kukamet Facts Weight: 0.155 kg Maximum clamping force: 750 N Maximum holding force: 1,000 N Pressure spindle: M5x35 Mounting: vertical foot eClass: 21041717 ETIM: EC011973 Special features Material: galvanised Type: vertical lever clamp Arm: not applicable Special feature: none Category: clamp FAQ What clamping capacity does the Vertical Clamp 212 offer? The Vertical Clamp 212 delivers a maximum clamping force of 750 N and a holding capacity of 1,000 N, specified for reliable workholding in fixture assemblies. How is the clamp mounted in upright installations? Mounting is via a vertical foot, enabling upright attachment to plates and fixtures for secure vertical clamping. Can the contact pressure be adjusted? Yes. The clamp uses an M5x35 adjustable pressure spindle for fine tuning contact pressure and compensating for workpiece variations. Is the clamp suitable for harsh workshop environments? The galvanised finish provides corrosion resistance suitable for standard workshop conditions, reducing maintenance needs and preserving function. What is the item number for ordering and identification? The clamp is listed as article number 212-1 (GTIN 8680731501476) for ordering and inventory management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp With Safety Lock, Horizontal Base, Blackened Finish - Kukamet
Take advantage of a compact, high-performance vertical clamp that combines a safety lock with reliable clamping and holding forces to keep small workpieces fixed during jigs and fixtures. The unit’s horizontal base and slim profile allow easy integration into assemblies while the blackened finish provides corrosion resistance and a professional appearance. Order via Metav Werkzeuge or request technical advice for fast supply from Emmerich. Vertikalspanner 211 – vertical clamp with safety lock (Kukamet) A Vertikalspanner 211 is a compact vertical clamping lever designed for secure fixation of small workpieces in jigs, fixtures and assembly rigs. Safety lock for secure clamping Horizontal base for fixed mounting Clamping force up to 750 N Holding force up to 1,000 N Reliable clamping for repeatable production The lever clamp delivers consistent, measurable force that supports repeatable assembly and testing cycles. With a clamping force rated at 750 N and a holding force of 1,000 N, the device reduces rework caused by slippage and misalignment. The integrated safety lock prevents unintentional release during handling and vibration-prone processes, thus improving process reliability and reducing downtime. Brief technical specifications such as spindle size are chosen to balance load capacity and compactness. Space-saving construction and durable finish The clamp’s compact form and lightweight construction make it suitable where space is limited or multiple clamps are required in close proximity. A blackened finish provides a protective surface that resists wear and presents a tidy workbench appearance. The small mass offers low inertia during actuation while maintaining structural rigidity, enabling secure clamping without bulky fixtures. The included spindle thread and length ensure stable contact with the workpiece while preserving adjustability. Straightforward installation and safe operation Designed for a horizontal base mounting, the clamp is easy to mount on plates, tooling blocks or fixture rails and can be retrofitted into existing jigs with minimal modification. The M5x35 spindle specification allows controlled pressure transfer and simple swapping of contact pads if required. The mechanism is engineered for simple lever action, enabling fast clamping cycles that help maintain throughput in manual and semi-automated stations. The incorporated safety lock supports safe handling during maintenance or intermittent processes. Practical applications and workshop benefits This vertical clamping lever is well suited for small- to medium-scale fixtures in inspection, assembly and light machining contexts. Its combination of compactness and performance is particularly useful when multiple clamps must be positioned near one another without obstructing access. The robust finish and decisive locking behaviour enhance confidence in repeated operations, making it a dependable component for routine production tasks and workshop projects. For secure, compact clamping with an integrated safety lock, request availability and technical advice from Metav Werkzeuge — supplied directly from Emmerich for quick integration into production. Technical Data Article number: B211-1-L GTIN: 8680731507645 Manufacturer: Kukamet Facts Clamping force: 750 N Holding force: 1,000 N Weight: 0.155 kg Spindle: M5x35 Special features Mounting: horizontal base Safety lock: yes Finish: blackened SKU: B211-1-L FAQ What maximum clamping and holding forces does the clamp provide? The Vertikalspanner 211 delivers a clamping force of up to 750 N and a holding force of up to 1,000 N, suitable for secure fixation in many jig and fixture applications. How is the clamp mounted in a fixture? Mounting is performed via a horizontal base; the clamp is intended for plate or tooling-block installation where a horizontal foot is required. Does the device include a safety mechanism to prevent accidental release? Yes, the unit is equipped with a built-in safety lock to prevent unintended opening during vibration or handling. What is the finish and how does it affect durability? The clamp features a blackened finish that enhances surface protection against wear and provides a clean, durable appearance for workshop environments. Which spindle specification is used for contact adjustment? The clamp uses an M5x35 spindle, offering a balance between fine adjustment and secure contact pressure. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp With Safety Lock, Horizontal Base, Stainless Steel - Kukamet
Benefit from a compact, corrosion‑resistant clamp that combines a stainless steel build with an integrated safety lock and delivers up to 750 N clamping force; order the unit directly via Metav Werkzeuge or contact our consultants for guidance. 211 Vertical Clamp — stainless steel vertical clamping element with safety lock (Kukamet) The 211 Vertical Clamp provides secure vertical clamping via a horizontal‑foot mounting and is suitable for production and workshop fixture applications. Stainless steel construction Integrated safety lock Max clamping force 750 N Horizontal-foot mounting Consistent clamping for repeatable production setups The vertical clamping element delivers predictable holding performance thanks to a rated clamping force of 750 N and a holding force of 1000 N, which supports repeatable workpiece positioning in serial operations. The compact design minimises fixture bulk while the low mass of 0.155 kg reduces the load on assemblies and allows quicker cycle times. These measurable values facilitate process planning and enable a reliable comparison of clamping resources across fixtures. Corrosion resistance and straightforward integration Constructed from stainless steel, the clamp resists corrosion and maintains functional surfaces in humid or oil‑prone shop environments, reducing replacement intervals and cleaning cycles. The unit is supplied for horizontal‑foot mounting, enabling straightforward attachment to tooling plates or subplates, while the pressure spindle M5x35 provides fine seating adjustment. This combination supports long service life and simplifies retrofitting into existing jigs without complex modifications. Safety features that protect parts and operators An integrated safety lock prevents accidental release during machining or handling, lowering the risk of workpiece displacement and subsequent rework. The lever‑style actuation gives a tactile, quick engagement and release, supporting efficient setup changes and safer manual operation. Built to industrial standards, the clamp contributes to consistent quality outcomes and reduces unplanned downtime through secure fixturing. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 211 Vertical Clamp into existing fixtures or to request a tailored quotation from our Emmerich team. Technical data Article number: S211-1-L GTIN: 8680731509113 eClass: 21041717 ETIM: EC011973 Facts Weight: 0.155 kg Max clamping force: 750 N Max holding force: 1000 N Pressure spindle: M5x35 Special features Material: stainless steel Integrated safety lock Horizontal-foot mounting Lever-style actuator FAQ What clamping and holding forces does the 211 offer? The Kukamet 211 Vertical Clamp provides a clamping force of 750 N and a holding force of 1000 N, specified for consistent fixture performance (SKU S211-1-L). Is the clamp suitable for corrosive or humid workshop environments? Yes, the clamp is manufactured from stainless steel, which improves corrosion resistance and is suitable for demanding shop environments where moisture or cutting fluids are present. How is the clamp mounted to a fixture plate? The unit uses a horizontal‑foot mounting that allows secure attachment to tooling plates or subplates; the pressure spindle M5x35 provides adjustment for precise seating. Does the clamp include a safety mechanism to prevent accidental release? An integrated safety lock is provided to reduce the risk of unintended release during machining or handling, enhancing both part security and operator safety. What type of actuation does the clamp use for engagement and release? The device employs a lever‑style actuator for quick manual engagement and release, supporting fast setup changes and reliable operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com