Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
95° Pneumatic Clamp Horizontal Base Zinc Plated, 4 500 N Push / 5 000 N Hold - Kukamet
Take advantage of a pneumatic clamping solution that combines fast pneumatic actuation, a maximum holding force of 5,000 N and a galvanised finish for dependable, low-maintenance performance on repetitive production tasks. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. 631 Pneumatic Clamp — Pneumatic lever clamp, galvanised, 5,000 N holding force (Kukamet) The 631 is a pneumatic clamp intended for repetitive clamping in workshop and production jigs, featuring a horizontal base and a 95° opening angle for easy access Pneumatic actuation for fast cycles Up to 5,000 N holding force Galvanised corrosion protection Horizontal base, 95° opening angle Consistent clamping to boost throughput The pneumatic actuation system delivers repeatable clamping with a maximum actuation force of 4,500 N and a maximum holding force of 5,000 N, which together ensure consistent retention once a workpiece is located. This consistency reduces rework and scrap by maintaining clamp pressure within narrow tolerances during each cycle. The pneumatic drive is designed for short cycle times and reliable repeatability, making the unit suitable for fixture work, assembly stations and repetitive CNC loading where predictable clamp force and fast operation translate directly into higher output. Built for long service in demanding environments Constructed with a galvanised finish and a robust mechanical layout, the clamp resists common workshop contaminants and offers corrosion protection that extends service intervals. The horizontal base mounting simplifies integration on flat fixture plates or jigs; the 95° opening angle provides improved access for loading and unloading, while the compact mass of 3.61 kg keeps additional load on the fixture low. The lever-style mechanism provides mechanical advantage and clear visual feedback when engaged, supporting both manual and automated workflows with modest maintenance requirements. Easy integration and practical handling for the production floor The clamp is designed to be connected to standard compressed-air systems and to work reliably as part of semi-automatic or fully automatic lines. The lever-type arrangement enables straightforward positioning of the clamp arm, and the galvanised surface reduces the need for frequent rework or replacement. For specific installation questions, dimensional checks or cycle-pressure recommendations, technical assistance is available; this helps to ensure that the clamp is matched to the correct cylinder pressure and control strategy for the intended application. For detailed technical data or application advice, contact info@metav-werkzeuge.com or call +49 2822 7131930. Choose the Kukamet 631 pneumatic clamp for reliable, repeatable production clamping and contact Metav Werkzeuge in Emmerich for tailored application guidance and prompt supply from our European stock Technical data SKU: 631-5 GTIN: 8680731504996 Manufacturer: Kukamet Material: galvanised Core technical data Weight: 3.61 kg Maximum actuation force: 4,500 N Maximum holding force: 5,000 N Opening angle: 95° ECLASS: 21021004 ETIM: EC011973 Features Mounting: horizontal base Type: lever clamp (pneumatic) Finish: galvanised Category: Spanner Special feature: none FAQ What is the difference between actuation force and holding force? Actuation force refers to the maximum force applied during the pneumatic closing action (4,500 N for this unit), while holding force describes the clamp’s static retention capacity once closed (5,000 N for the 631 pneumatic clamp by Kukamet). Can the clamp be mounted on a flat fixture plate? Yes, the 631 features a horizontal base designed for secure mounting on flat fixture plates and jigs, facilitating integration into existing tooling. Is the 631 suitable for automated production lines? Yes, the pneumatic actuation and lever arrangement make the 631 suitable for semi-automatic and fully automated systems where fast, repeatable clamping is required. What maintenance is recommended? Routine checks of pneumatic connections, a visual inspection of the galvanised surface and periodic verification of clamp engagement are recommended to maintain reliable operation of the Kukamet 631. Are dimensions and installation data available? Dimensional drawings and installation recommendations are available on request to support correct mounting and system integration for the 631 (SKU 631-5). Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Foot 750 N Push, Zinc-Plated 0.47 kg - Kukamet
Take advantage of a robust, zinc-plated pneumatic solution that combines consistent clamping power and a compact, lightweight design for reliable fixture performance; order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Clamp 631 by Kukamet — horizontal-foot clamp with 750 N pressing force The Pneumatic Clamp 631 is a horizontal-foot pneumatic clamping device designed for workshop fixtures and light production assembly, offering rapid actuation and repeatable holding capacity. Kukamet pneumatic clamp »631« with horizontal foot Zinc-plated body for corrosion resistance Max pressing force 750 N, holding 1,000 N Lightweight design, net weight 0.47 kg Fast, repeatable clamping for efficient workflows This pneumatic clamping unit delivers a clearly defined clamping performance that supports process stability on assembly lines and jig applications. With a pressing force of 750 N and a holding capacity of 1,000 N, the device enables secure workpiece retention without overdesigning the fixture. The pneumatic actuation ensures rapid cycle times and consistent force delivery, which reduces rework and contributes to higher throughput. Technical terms explained: pressing force refers to the active clamping push, while holding capacity indicates the maximum static retention the clamp can sustain once actuated. Durable construction and compact footprint for easy integration Constructed with a zinc-plated body, the clamp resists corrosion in workshop environments and retains a finished appearance under frequent handling. The horizontal foot mount provides a low-profile attachment point for bench fixtures or modular tooling plates, while the compact mass—0.47 kg—keeps added inertia to a minimum for rotating or mobile fixtures. The unit’s 95° swivel angle facilitates clearance in tight arrangements and allows straightforward alignment of the clamping arm within a jig layout. These attributes simplify mechanical integration and reduce design iterations during installation. Practical handling and application advantages for daily use Designed for straightforward installation and low maintenance, the clamp offers practical benefits for toolrooms and production environments alike. The lightweight and corrosion-resistant characteristics help to lower long-term upkeep, while pneumatic operation eliminates manual fatigue in repetitive tasks. The compact form factor makes the device suitable for small-batch production and dedicated fixtures where space is limited. For users seeking stability and repeatability in clamping without complex control systems, this pneumatic solution provides a pragmatic balance between performance and simplicity. Select the Kukamet pneumatic clamp 631 for dependable clamping performance in jigs and fixtures — contact Metav Werkzeuge for specification support and procurement via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 631-1 GTIN: 8680731502992 Manufacturer: Kukamet Facts Net weight: 0.47 kg Max pressing force: 750 N Max holding force: 1,000 N Swivel/working angle: 95° Special features Material: zinc-plated Mounting: horizontal foot No additional special features indicated FAQ What is the maximum clamping force of this clamp? The Kukamet pneumatic clamp 631 provides a pressing force of 750 N and a holding capacity of 1,000 N for secure workpiece retention. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the unit is designed for low-profile attachment to bench plates and modular jigs. Is the clamp suitable for corrosive workshop environments? The zinc-plated finish on the clamp offers corrosion resistance suitable for typical workshop and production settings. What is the weight and how does that affect integration? The clamp weighs 0.47 kg, which keeps added inertia low and simplifies integration in compact or movable fixture designs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
970 N Hold Force Push Rod Clamp With Horizontal Foot, Stainless Steel - Kukamet
Compact stainless steel design with a horizontal foot and an M5×35 spindle provides dependable clamping and holding forces of 800 N / 970 N for light industrial fixtures; combine robustness, low weight and simple mounting for smooth fixture workflows. Order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 511 (S511-1) by Kukamet — stainless steel, horizontal foot, M5×35 spindle Push-rod clamp 511 is a compact horizontal-foot clamp designed for light-duty jigs and workholding where reliable, repeatable clamping is required Stainless steel construction Horizontal foot mounting Max clamping 800 N, holding 970 N Compact weight 0.135 kg Predictable holding performance for repeatable processes The clamp delivers defined mechanical values: a clamping force of 800 N and a holding force of 970 N, which ensures consistent fixation in small fixtures and assembly jigs. The difference between clamping and holding force reflects safe static retention versus active closing power; this distinction helps when designing clamping sequences and selecting suitable fasteners. The M5×35 spindle provides a standard thread connection for integration into existing fixture plates, while the stainless construction supports stable performance under regular workshop conditions. Easy integration and space-saving mounting A horizontal foot allows the device to be mounted on flat surfaces and positioned close to the workpiece, reducing overhang and minimising interference with tooling. With a compact weight of 0.135 kg, the unit adds minimal load to movable fixtures and can be installed in multiples without affecting balance. The low mass and standard fastening enable quick retrofitting into jigs and fixtures; installation uses commonly available M5 hardware and needs no special adapters, simplifying layout and reducing setup time. Durable material choice for low-maintenance operation Constructed from stainless steel, the clamp combines mechanical resilience with corrosion resistance, lowering the frequency of replacements in environments with occasional humidity or coolant exposure. Stainless components also support hygienic workspaces and reduce the need for surface treatments. The simple mechanical design minimises wear parts, enabling long service intervals and predictable maintenance planning for production lines and small-batch operations. Application scope and handling advantages Positioned as a light to medium workholding device, the clamp is suitable for repetitive assembly, prototyping fixtures and small-scale machining jigs where compact form and clear force figures are priorities. The mechanism offers quick actuation and secure retention, helping to speed up cycle times in manual or semi-automated processes. Its straightforward construction supports straightforward inspection and replacement of consumable parts, contributing to consistent quality and reduced downtime. Contact Metav Werkzeuge today to discuss how the Kukamet push-rod clamp 511 fits into existing fixtures or to request further technical clarification from Metav's consultants. Technical data SKU: S511-1 GTIN: 8682843520000 eClass: 21041716 ETIM: EC011973 Numbers Max clamping force: 800 N Max holding force: 970 N Weight: 0.135 kg Designs / Special features Material: stainless steel Mounting: horizontal foot Pressure spindle: M5×35 Special feature: none FAQ What maximum forces does the clamp provide? The push-rod clamp 511 offers a clamping force of 800 N and a holding force of 970 N for reliable fixation in light-duty fixtures. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot; the clamp is suitable for direct attachment to flat plates using standard fasteners compatible with the horizontal-foot arrangement. Which spindle thread is used on the device? A pressure spindle with an M5×35 specification is fitted, allowing straightforward connection with M5 threaded components. Is the clamp suitable for environments with moisture or coolant? The stainless steel construction of the 511 clamp supports increased corrosion resistance and reduces maintenance in environments with occasional moisture exposure. What size and weight should be expected when fitting multiple clamps? Each unit weighs 0.135 kg, enabling multiple installations without significant addition of mass to movable fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
97mm Clamp Height Compact Clamp 60mm Reach Closed Mounting Hole - BESSEY
Take advantage of the combination of reliable 97 mm clamping height, a compact 60 mm reach and an aluminium pressure pad for consistent, damage‑free clamping. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. BAS Compact Clamp by BESSEY — 97 mm clamping height, 60 mm reach A BAS Compact Clamp engineered for secure, space‑saving clamping in tight workshop environments, featuring an aluminium pressure pad and a closed mounting hole for fixed installation 97 mm clamping height for higher workpieces 60 mm reach for close‑quarter applications Aluminium pressure pad for even load distribution Closed mounting hole for secure fixed installation Secure clamping where space is limited The combination of a 97 mm clamping height and a 60 mm reach makes this compact clamp ideal for tasks where vertical capacity and short overhang are both required. The larger clamping height allows accommodation of thicker assemblies while the restrained reach keeps the tool manoeuvrable in confined jigs and benches. For production and repair work, this translates into fewer tool changes and faster setup times, improving workflow efficiency without sacrificing clamping force or reliability. Even pressure and surface protection for delicate components Equipped with an aluminium pressure pad, the clamping face distributes force across a broader area to reduce marking and distortion on softer or finished components. The pressure pad’s design enables even load distribution, which is particularly useful for laminates, thin panels and prep work before final fixing. This gentle yet secure contact supports repeatable, high‑quality results and reduces scrap caused by clamp damage, supporting consistent part quality across runs. Robust attachment and simple workshop integration The clamp’s closed mounting hole permits secure, permanent fastening to fixtures, benches or assembly jigs, enabling a fixed clamping station when needed. As a compact clamp, it is compatible with modular workshop setups and can be integrated into fixtures to save space and speed up repetitive operations. Built to the practical needs of craftsmen and small production lines alike, the tool offers dependable performance for day‑to‑day clamping tasks while remaining easy to handle and position. For precise clamping from a trusted brand, contact Metav Werkzeuge to request a technical consultation or to place an order for the BESSEY BAS Compact Clamp (SKU 4123716050NW) — our Emmerich team will assist with specifications and delivery arrangements Technical data Article number: 4123716050NW Type: BAS Product: Compact clamp Manufacturer: BESSEY Packaging unit: 1 Facts Clamping height: 97 mm Reach: 60 mm Special features Aluminium pressure pad Closed mounting hole Compact design FAQ What is the maximum clamping height of this clamp? The clamping height is 97 mm for the BAS Compact Clamp (BESSEY, SKU 4123716050NW), allowing secure holding of relatively tall workpieces. How far does the clamp reach from the fixing point? The clamp provides a 60 mm reach, designed for close‑quarter clamping and use in confined jigs or bench fixtures. Does the clamping face protect finished surfaces? Yes. The aluminium pressure pad on the BAS Compact Clamp delivers even load distribution to minimise marking and protect delicate surfaces during clamping. Can the clamp be fixed permanently to a workbench or jig? The closed mounting hole permits fixed installation, enabling secure attachment of the clamp to benches or custom fixtures for repeatable use. How many items are supplied per package? The item is supplied as a single unit (packaging unit: 1) for direct installation into the workshop. Manufacturer: BESSEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
97mm Clamp Height Compact Clamp 60mm Reach Open Pressure Shoe, - BESSEY
Take advantage of a compact clamping solution that delivers precise 97 mm clamping height and a 60 mm reach for confined assembly tasks; the open aluminium pressure shoe protects workpieces while the open mounting hole enables flexible installation—order the unit via Metav Werkzeuge or consult our specialists for compatibility and supply. BAS Compact Spanner — 97 mm clamping height, 60 mm reach (BESSEY) The BAS Compact Spanner is a workshop-grade compact spanner designed for secure clamping in tight assemblies, offering a 97 mm clamping height and a 60 mm reach with an open aluminium pressure shoe for surface protection. 97 mm clamping height for deep work 60 mm reach for narrow spaces Open aluminium pressure shoe for gentle clamping Open mounting hole for flexible installation Secure clamping where space is limited The combination of 97 mm clamping height and 60 mm reach delivers reliable hold in confined setups. The increased clamping height permits taller workpieces to be fixed without sacrificing access, while the modest reach ensures the tool fits into restricted jig and fixture arrangements. This results in fewer workpiece movements and shorter set-up times, so processes are more efficient and downtimes are reduced. Precision and repeatability are supported by the compact form factor, which prevents unnecessary lateral play during tightening. Gentle contact for sensitive surfaces Fitted with an open aluminium pressure shoe, the clamping surface spreads load and reduces point pressure, lowering the risk of marring on softer materials. An aluminium pressure shoe functions as a sacrificial interface: it conforms slightly under load and can be replaced if heavily worn. For applications where surface finish matters, this feature preserves component integrity while maintaining secure clamping force. The open design also permits visual inspection of the contact area during operation, helping to ensure consistent positioning. Flexible fastening and installation options An open mounting hole is provided for straightforward fastening to workbenches, fixtures or custom jigs, enabling rapid integration into existing setups. The compact construction minimises interference with surrounding tools and allows several units to be mounted in close proximity for multi-point clamping. Because the spanner is compact, bench layout can be optimised for production flow, and fixture design simplified, which contributes to shorter retooling times and better shop-floor ergonomics. Built for routine industrial and workshop use Manufactured to meet practical daily demands, this compact spanner is suitable for repetitive assembly and clamping tasks in metalworking and general workshop environments. The straightforward mechanical design reduces the need for complex maintenance; components that experience wear are readily accessible and can be serviced without specialised equipment. Reliability in everyday use supports consistent production quality, while the compact footprint helps to maximise valuable bench space and streamline operations. Contact Metav Werkzeuge today to confirm compatibility and lead times for the BAS compact spanner—expert advice and secure supply from Emmerich are available by phone or email Technical data Article number: 4123716020NW Product type: Compact spanner Manufacturer: BESSEY Clamping height: 97 mm Reach: 60 mm Execution: open mounting hole; open aluminium pressure shoe Facts SKU: 4123716020NW Clamping height: 97 mm Reach: 60 mm Special features Open aluminium pressure shoe Open mounting hole for flexible installation Compact design for confined spaces FAQ What is the maximum clamping height of this spanner? The clamping height is 97 mm for the BAS compact spanner (SKU 4123716020NW), allowing secure fixation of taller workpieces within a compact footprint. How far does the spanner reach from the mounting point? The tool provides a 60 mm reach, suitable for use in narrow fixtures and confined assembly situations. What benefit does the aluminium pressure shoe provide? The open aluminium pressure shoe distributes clamping force to reduce surface marking and offers a replaceable contact surface for prolonged component protection. Can the spanner be fastened directly to a bench or jig? Yes, the spanner features an open mounting hole that enables direct fastening to benches, fixtures or custom jigs for straightforward integration. Is this spanner designed for workshop use? The BAS compact spanner is intended for routine workshop and industrial clamping tasks, offering a durable, compact solution for repetitive assembly operations. Manufacturer: BESSEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
97mm Clamping Height Compact Clamp Open Pressure Shoe, 60mm Throat - BESSEY
Reliable clamping is achieved by the combination of a 97 mm clamping height and a 60 mm reach, delivering a stable hold for taller workpieces while remaining suitable for confined workspaces; the open mounting hole allows fast, flexible attachment. Order the BAS clamp directly via Metav Werkzeuge or contact our consultants for application advice. BAS compact clamp by BESSEY — 97 mm clamping height, 60 mm reach The BAS compact clamp is a robust compact clamping tool designed for secure holding in metalworking and woodworking applications, offering fast set-up and versatile mounting options. 97 mm clamping height for taller workpieces 60 mm reach for flexible positioning Open mounting hole for quick attachment Compact design for tight workspaces Secure hold for larger and awkward parts The 97 mm clamping height provides a measurable advantage when working with taller fixtures or stacked components; this extra clearance reduces the need for secondary fixturing and shortens setup time. As a compact clamp, the unit balances substantial clamping range with a small footprint, making it suitable for benches and jigs where space is at a premium. The mechanical principle is straightforward: increased clamping height enables contact with higher surfaces while maintaining lateral stability, which contributes to a secure hold during machining or assembly. Fast, adaptable mounting that saves production time An open mounting hole simplifies attachment to existing fixtures or customer-specific plates, allowing through-bolting and easy alignment without disassembly. This feature supports repeatable positioning and speeds changeovers, a clear efficiency gain in series production or mixed-batch workshops. The 60 mm reach ensures the clamping force can be applied slightly offset from the fixing point, which helps when accessing complex geometries or when multiple clamps must share limited bed space. Designed for dependable everyday workshop use Built for routine industrial tasks, the clamp focuses on reliability and low-maintenance operation. The combination of a compact form and robust functional design reduces obstruction around the workpiece while delivering consistent performance across repeated cycles. For users seeking predictable results, the clamp’s specifications—especially the 97 mm clamping height and 60 mm reach—translate directly into fewer setup iterations and more stable processing. For further technical clarification, Metav Werkzeuge can supply detailed application guidance and compatibility notes. For precise advice on the BESSEY BAS compact clamp — featuring a 97 mm clamping height and 60 mm reach — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4123716030NW Type: BAS Product: Compact clamp Manufacturer: BESSEY Label: BAS Spannhöhe 97mm A.60mm o.AL-Druckschuh offen Bessey Facts Clamping height: 97 mm Reach: 60 mm Packaging unit: 1 Design & features Open mounting hole Compact design Open pressure shoe FAQ What is the exact clamping height of this clamp? The clamping height is 97 mm on the BESSEY BAS compact clamp (SKU 4123716030NW), providing clearance for taller workpieces. Can the clamp be fixed to custom fixtures or plates? Yes — the open mounting hole enables through-bolting to plates and fixtures for repeatable alignment and fast installation. Is the clamp suitable for use in tight benches or small jigs? The compact design and 60 mm reach make the clamp well suited to confined workspaces while still delivering effective positioning. What does the open pressure shoe mean in practice? An open pressure shoe allows direct contact with the workpiece and easy replacement or adaptation of the pressure interface to match specific parts. Does this clamp support quick changeovers in production? The combination of measured clamping height, practical reach and the open mounting hole reduces setup time and supports faster changeovers in serial operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
97mm Compact Spanner Closed Mounting Hole, 60mm Reach - BESSEY
Take advantage of a compact, reliable clamping solution with a 97 mm clamping height and 60 mm throat depth for precise, repeatable hold. The combination of generous clamping capacity and a closed mounting hole ensures stable fixture attachment in tight production environments. Order the clamp directly via Metav Werkzeuge or consult the team for application advice. BESSEY BAS Compact Clamp — 97 mm clamping height, 60 mm throat depth The BAS Compact Clamp is a compact bar clamp designed for secure holding in workshop, assembly and light production tasks where a tall clamping range and close-to-edge reach are required 97 mm clamping height for taller workpieces 60 mm throat depth for close-to-edge clamping Closed mounting hole for secure attachment Compact design for tight workspaces Secure hold for taller and awkward workpieces The 97 mm clamping height delivers a measurable advantage when working with thicker assemblies or stacked substrates. This increased vertical capacity allows a larger clamping range without switching tools, reducing setup time and improving throughput. In practice, the higher throat clearance enables clamping over jigs or fixtures while still applying consistent pressure across the workpiece. The result is reliable positioning and fewer reworks in repetitive tasks. Close-to-edge reach that improves accessibility With a 60 mm throat depth, the product provides a practical balance between reach and rigidity. The extended reach makes it possible to clamp near edges or into recesses where standard clamps cannot access, while the compact bar profile maintains stiffness under load. For users unfamiliar with the term: throat depth denotes the distance from the clamp bar to the clamping face, and a deeper throat means better access without relocating the workpiece. Stable attachment and long-term workshop reliability The closed mounting hole offers a secure method for fixing the clamp to workbenches, fixture plates or dedicated fixturing. This feature reduces lateral movement during operations and simplifies integration into permanent setups. Combined with the compact form factor, the clamp is especially suitable for benches with limited space, dedicated assembly stations and small-batch production lines where repeatable accuracy and a tidy workstation are priorities. Practical advantages for industrial and craft settings Built for frequent use, the design emphasises fast handling and dependable performance. The compact construction minimises storage footprint and allows multiple clamps to be deployed across assembly or fixture points. For production planners and workshop managers, this means fewer tool changes and smoother process flow. The clamp is targeted at craftsmen, maintenance teams and light production users seeking a robust, space-efficient clamping solution. Choose the BESSEY BAS compact clamp for dependable clamping performance and streamlined workflows — contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 4123716060NW Manufacturer: BESSEY Type: BAS Product type: Compact clamp Packaging unit: 1 Facts Clamping height: 97 mm Throat depth / projection: 60 mm Article number / UID: 4123716060NW Special features Closed mounting hole Compact design for limited space Suitable for workshop and assembly applications FAQ What maximum clamping height does the clamp offer? The clamp provides a clamping height of 97 mm, as specified for the BESSEY BAS compact clamp, allowing secure holding of thicker workpieces. Is the clamp suitable for fixing to a workbench or fixture? Yes, the closed mounting hole enables secure attachment to benches or fixture plates for repeated, stable positioning. Can the clamp reach close to edges and recesses? The 60 mm throat depth permits close-to-edge clamping and access into shallow recesses while maintaining rigidity. Which SKU should be ordered for this configuration? Order SKU 4123716060NW for the BESSEY BAS compact clamp with a 97 mm clamping height and 60 mm throat depth. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Gegenhalter Nr.6847G Gr.1 verz.AMF
für Verschlussspanner Nr. 6847 · verzinkt und passiviert · einsatzgehärtete Buchsen · Niete aus nicht rostendem Stahl Weitere technische Eigenschaften: · B: 6mm · L: 31mm · O: 6,9mm · Höhe: 29mm · H: 22,7mm · N: 40mm · K: 6mm · M: 26-30mm · C: 19mm · Länge: 31mm · D: 8mm · G: 4,5mm
Gegenhalter Nr.6847G Gr.3 verz.AMF
für Verschlussspanner Nr. 6847 · verzinkt und passiviert · einsatzgehärtete Buchsen · Niete aus nicht rostendem Stahl Weitere technische Eigenschaften: · B: 6mm · L: 40mm · O: 10,9mm · Höhe: 29mm · H: 22,7mm · N: 45mm · K: 13mm · M: 31,3-35,8mm · C: 19mm · Länge: 40mm · D: 10mm · G: 5,5mm
Gegenhalter Nr.6847G Gr.5 verz.AMF
für Verschlussspanner Nr. 6847 · verzinkt und passiviert · einsatzgehärtete Buchsen · Niete aus nicht rostendem Stahl Weitere technische Eigenschaften: · B: 12mm · L: 55mm · O: 13,8mm · Höhe: 61mm · H: 49,1mm · N: 86mm · K: 13mm · M: 56,5-64mm · C: 29mm · Länge: 55mm · D: 15mm · G: 11,2mm
Horizontal-Kippspanner 141 mit waagerechtem Fuß
Horizontal-Kippspanner 141 mit waagerechtem Fuß
Horizontal-Kippspanner 142 mit senkrechtem Fuß
Horizontal-Kippspanner 142 mit senkrechtem Fuß
Horizontalspanner 111 mit waagerechtem Fuß
Technische Übersicht: Hersteller: Kukamet Bezeichnung: Horizontalspanner Material: Edelstahl oder Verzinkt je nach Ausführung Abmessung Andruckspindel: M10x70 - M8x50 Befestigungsart: waagerechter Fuß Maximale druckkraft: 450 N - 4500 N Gewicht: 0,042 kg - 1,58 kg Haltekraft Max.: 520 N bis 5000 N Mit massivem Arm Mit Sicherheitsverriegelung Bestelle jetzt bequem online Horizontalspanner!
Horizontalspanner 112 mit senkrechtem Fuß
Technical Overview:Manufacturer: KukametModel: Horizontal toggle clampOrder now Horizontal toggle clamp Online.
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Horizontalspanner 112 mit senkrechtem Fuß
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com