Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° Vertical Clamp With Upright Base 470 N Thrust, Zinc Plated 700 N Hold Force - Kukamet
Combining a 90° vertical mounting, a galvanized finish and a strong holding force of 700 N, the clamp provides dependable, repeatable clamping for jigs and fixtures. Order the vertical clamp directly via Metav Werkzeuge or ask the consultants for application support. Vertikalspanner 252 — Vertical lever clamp with 90° mounting by Kukamet Vertikalspanner 252 is a compact vertical lever clamp engineered for secure 90° fixturing in production lines and workshop jigs, offering corrosion resistance and a high holding capacity for repetitive operations. Vertical mounting with 90° angle Galvanized finish for corrosion resistance Holding force 700 N, clamping 470 N Compact design, only 65 g weight Secure vertical clamping for repeatable fixtures The vertical lever design delivers a consistent holding force of 700 N while the operating mechanism provides a clamping force of 470 N, which together ensure components remain stable during machining and assembly. These measurable forces translate into fewer reworks and faster cycle times, improving process reliability. The clamp’s behaviour under load is predictable, supporting stable setups in serial production and reducing time spent on manual repositioning. Corrosion-resistant, lightweight construction for long service life Manufactured in galvanized steel and weighing just 0.065 kg (65 g), the unit combines low mass with robust surface protection to resist rust in workshop environments. The compact footprint eases integration into narrow fixture plates and keeps overall jig weight down, which is beneficial when tooling is frequently swapped. The galvanized finish reduces maintenance intervals and preserves clamping accuracy over prolonged use, supporting sustainable uptime. Fast handling and smooth integration into jigs Designed with a vertical foot mounting and a fixed 90° angle, the clamp fits standard fixture patterns and provides rapid actuation for repetitive tasks. The lever mechanism enables quick manual engagement and disengagement, speeding up clamping cycles without special tools. With its small form factor and clear mechanical specification, the component simplifies fixture design and allows consistent operator handling, contributing to a smoother workflow on the shop floor. For reliable 90° vertical clamping from Kukamet, contact Metav Werkzeuge for supply and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific jigs and applications Technical data SKU: 252-2 GTIN: 8680731504507 Manufacturer: Kukamet EClass: 21041717 ETIM: EC011973 Numbers / Core technical data Holding force: 700 N Clamping force (max): 470 N Weight: 0.065 kg (65 g) Angle: 90° Special features Material: galvanized Mounting type: vertical foot Type: lever clamp No special features listed FAQ What is the maximum holding force of this clamp? The vertical clamp offers a holding force of 700 N as specified for secure clamping in repetitive fixtures. Can this clamp be used where corrosion resistance is required? Yes, the clamp has a galvanized finish to provide enhanced corrosion resistance for workshop environments. How heavy is the clamp and why does that matter? At 0.065 kg (65 g), the unit is very lightweight, which helps keep fixture mass down and simplifies handling during tool changes. Is the clamp suitable for integration in 90° fixturing systems? The clamp features a fixed 90° vertical mounting and a vertical foot, making it suitable for standard right-angle fixture arrangements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Zinc Plated Horizontal Foot, 2,000 N Thrust / 3,370 N Holding Force - Kukamet
Take advantage of a compact, high-force clamping solution that combines reliable holding power and corrosion-resistant finish for long service life. Order directly via Metav Werkzeuge or contact our advisors for application support. Vertical lever clamp 251 by Kukamet — galvanised, 2000 N clamping force The Vertical lever clamp 251 is a compact vertical clamping device for rapid workpiece fixation in fixtures and jigs, engineered for secure 90° positioning with a horizontal foot for straightforward mounting. 2000 N clamping force 3370 N holding force Galvanised steel finish Horizontal foot, 90° mounting Consistent clamping power for repeatable production The clamp delivers a rated 2000 N clamping force and a 3370 N holding force, ensuring reproducible fixation in repetitive operations. These figures indicate the maximum active clamping pressure and the static retention capacity respectively; the distinction matters when setting stop blocks or designing fixtures. The robust force values reduce slippage and rework, improving throughput and process stability while lowering inspection overhead. The galvanised surface adds corrosion resistance, so the mechanical performance is retained in workshop environments where humidity or coolant exposure is present. Compact mounting for versatile fixture layouts Designed with a horizontal foot and a fixed 90° clamping orientation, the unit integrates simply into modular tooling plates and welded fixtures. With a mass of 0.71 kg, the clamp minimises additional load on moving subassemblies and allows multiple units to be deployed without excessive weight build-up. The horizontal foot simplifies alignment: the base fastens to the mounting plane and the lever action provides a clear vertical clamping travel, making cycle timing predictable and repeatable in automated or manual setups. Durable construction and straightforward function Constructed from galvanised steel, the clamp resists surface corrosion while offering the mechanical toughness expected for daily shop-floor use. The lever mechanism is a proven toggle-style design, converting operator or actuator motion into high clamping force with positive lock at the end position; this ensures the workpiece remains secured even under vibration. The Kukamet unit (SKU 251-4) is thus suitable for production jigs, assembly stations and maintenance tooling where quick engagement and reliable holding are essential. Basic installation requires common fasteners and minimal adjustment, which keeps setup time low and maintenance tasks simple. For reliable repeat clamping and fast integration, consider the Kukamet vertical lever clamp 251—contact Metav Werkzeuge in Emmerich for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 251-4 GTIN: 8680731504569 Brand: Kukamet Material: galvanised Data Clamping force (max): 2000 N Holding force (max): 3370 N Weight: 0.71 kg Angle: 90° Special features Mounting: horizontal foot Category: Clamps No special additional features indicated FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum active clamping force of 2000 N; the static holding capacity is 3370 N for the Kukamet vertical lever clamp (SKU 251-4). Can the clamp be mounted on standard fixture plates? Yes — the unit features a horizontal foot for straightforward attachment to fixture plates and is designed for a 90° clamping orientation suitable for most jig layouts. What material is the clamp finished in and how does that affect durability? The clamp is galvanised, which improves corrosion resistance for workshop conditions and helps maintain mechanical reliability over time. Is the clamp suitable for automated actuation or manual use? The toggle lever principle delivers repeatable mechanical advantage for both manual operation and mechanical or pneumatic actuation; the compact mass (0.71 kg) supports integration into automated stations. Which applications are typical for this type of clamp? Typical uses include production jigs, assembly fixtures, and maintenance tooling where quick engagement, predictable clamping travel and secure retention are required — as provided by the Kukamet vertical lever clamp 251 (SKU 251-4). Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
91mm Vertical Clamp 3000N Thrust, Massive Holding Arm, Zinc Plated - Kukamet
The compact design and galvanised steel construction deliver reliable, low-maintenance clamping with a 91 mm arm and a robust holding arm rated to 3,300 N, ensuring secure workholding and consistent production quality. Order directly via Metav Werkzeuge or consult our specialists for specification support. 213 Vertical Clamp — 91 mm arm, galvanised (Kukamet) The 213 Vertical Clamp is a compact vertical clamping device for secure, repeatable workholding in workshop and light production environments, suited to assembly fixtures and jigs. Massive holding arm for stable clamping 91 mm arm length for compact workstations Galvanised steel body for corrosion resistance Consistent clamping for reliable production flow The clamping unit offers a consistent holding force that supports repeatable positioning and reduces rework. With a holding force of 3,300 N and a maximum pressing force of 3,000 N, the device provides measurable performance for specification-driven processes. These figures enable planners and buyers to compare the unit directly with other workholding elements and to calculate fixture safety margins. The compact 91 mm arm minimises intrusion into the machining envelope while the relatively low mass contributes to easy handling during fixture assembly. Durable design reduces lifecycle maintenance Constructed from galvanised steel and fitted with a massive holding arm, the clamping device is designed for daily workshop demands. The protective galvanised finish lowers corrosion risk in humid environments and extends service intervals compared with untreated components. The angle-base mounting provides a secure connection to frames or plates, simplifying integration into modular fixturing systems. Overall, the design reduces downtime and supports continuous operation with minimal upkeep. Clear data for specification and integration Technical characteristics are compact and directly applicable to fixture design: arm length, clamping forces, material and mounting type define compatibility with existing assemblies. The device is supplied as a ready-to-install vertical clamp with an angle base for secure attachment. Its sub-kilogram weight makes it suitable for applications where added mass must be limited. Where documentation is required, the SKU and GTIN permit exact identification for purchasing, stocking and traceability in production logistics. For robust, specification-backed clamping from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 213-4-D-C1 GTIN: 8680731502039 eCl@ss: 21041717 ETIM: EC011973 Facts Arm length: 91 mm Max pressing force: 3,000 N Max holding force: 3,300 N Weight: 0.921 kg Special features Material: galvanised steel Mounting: angle base Massive holding arm Category: clamp (spanner) FAQ What clamping forces does the 213 Vertical Clamp provide? The 213 Vertical Clamp delivers a maximum pressing force of 3,000 N and a holding force of 3,300 N, values suitable for many light production and fixture applications. Which mounting method is used for the clamp? The clamp is fitted with an angle-base mounting for secure attachment to frames, plates or modular fixture systems. What material and finish does the clamping unit have? The clamping device is manufactured from galvanised steel to enhance corrosion resistance and reduce maintenance intervals. Is the arm length suitable for compact fixtures? With a 91 mm arm length, the clamping element is intended for compact workstations and fixtures where space is limited. Can the clamp be identified for ordering and traceability? Yes. The unit is available under SKU 213-4-D-C1 and GTIN 8680731502039 for precise ordering and inventory control. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
91mm Vertical Clamp With Angle Base, Solid Holding Arm, 3,300 N Hold Force, 3,000 N Thrust - Kukamet
Take advantage of a robust, compact clamping solution that combines a solid 91 mm holding arm, a high clamping force of 3,000 N, and a compact weight for easy fixture integration; order the clamp directly via Metav Werkzeuge or request advice from our consultants if technical details are required. Kukamet Vertical clamp 213 — vertical clamping device with 91 mm arm and massive holding arm Kukamet Vertical clamp 213 is a compact vertical clamping device designed for secure workholding in jigs, fixtures and small assembly stations, combining a sturdy holding arm with a space-saving angled base for flexible installation. Solid 91 mm holding arm for deep clamping Angle-base mounting for stable positioning High clamping force up to 3,000 N Blackened finish resists wear Confident, measurable clamping for reliable production The clamp delivers a measured clamping force of 3,000 N and a maximum holding force of 3,300 N, providing quantifiable retention for repeatable processes. These force values (expressed in newtons) indicate how much linear force the device exerts and retains under load; this makes the unit suitable where defined clamping performance is required. The solid holding arm and compact design reduce elastic deflection during operation, which in turn improves process stability and reduces rework. For production planners and workshop managers the result is predictable fixturing and fewer rejects. Flexible installation that fits tight assembly layouts An angle-base mounting allows the clamp to be secured to fixture plates or machine tables without consuming excessive vertical space; the design supports quick integration into existing tooling layouts. At 91 mm arm length the device reaches into shallow recesses while keeping the overall footprint small. With a weight of approximately 0.921 kg, the clamp is light enough for modular fixture assemblies yet heavy enough to feel solid in use. These characteristics facilitate retrofitting into assembly jigs and make the clamp well suited for batch production or maintenance fixtures where space economy and rigidity are both priorities. Built for durability and low maintenance Constructed with a massive holding arm and a blackened finish, the clamp is prepared for continuous workshop use. The robust arm geometry resists bending under cyclical loads and the surface treatment reduces visible wear from handling and contact. The straightforward mechanical design minimises service points and simplifies routine inspection, which helps keep downtime and maintenance costs low. Where continuous uptime matters, the device’s simple, sturdy construction supports long-term reliability. Practical applications and workshop compatibility The clamp is intended for use in fixtures, assembly benches and jigs where vertical retention is required. Typical applications include securing components during machining setups, holding parts for welding or soldering operations and stabilising workpieces in inspection fixtures. Its compact form and standard mounting allow straightforward incorporation into bespoke fixtures or modular tooling systems, offering a practical alternative where a compact, high-force vertical clamp is needed. Select Kukamet quality for secure, compact clamping — contact Metav Werkzeuge for ordering or technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specification and integration Technical Data Article number: B213-4-D-C1 GTIN: 8680731508017 Model: 213 Brand: Kukamet Facts Arm length: 91 mm Clamping force (max): 3,000 N Holding force (max): 3,300 N Weight: 0.921 kg eClass: 21041717 ETIM: EC011973 Special features Mounting: angle base Massive holding arm Finish: blackened FAQ What is the maximum clamping force of this clamp? The Kukamet Vertical clamp 213 provides a maximum clamping force of 3,000 N, with a holding force rating up to 3,300 N, which gives a clear performance metric for secure fixturing. How is the clamp mounted to a fixture or plate? The Kukamet Vertical clamp 213 is fitted for an angle-base mounting, permitting secure attachment to fixture plates or machine tables and enabling low-profile installation. What is the usable reach of the holding arm? The clamp’s holding arm has a reach of 91 mm, offering access into shallow recesses and suited for compact jig and fixture arrangements when space is limited. What finish and construction quality can be expected? The Kukamet Vertical clamp 213 features a massive holding arm and a blackened finish, designed for durability and reduced visible wear during regular workshop use. Which production tasks is this clamp best suited to? This vertical clamp is intended for fixturing, assembly and machining set-ups where compact, repeatable vertical clamping is required; the Kukamet Vertical clamp 213 integrates easily into jigs, fixtures and modular tooling systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
94mm Massiver Haltearm Vertikalspanner, 750N Druckkraft, senkrechter Fuß - Kukamet
Kompakt, robust und funktional: Der Vertikalspanner bietet mit seinem massiven Haltearm, der Haltekraft von 1.000 N und einer Druckkraft von 750 N zuverlässige Spannlösungen für Werkstatt und Fertigung. Die Bauform mit senkrechtem Fuß ermöglicht einfache Montage und stabile Positionierung; bei offenen Fragen technische Details oder Bestelloptionen direkt über Metav anfragen. Vertikalspanner von Kukamet Der Vertikalspanner ist ein Hebelspanner für präzise Spannaufgaben in Werkstatt und Produktion und wurde für stabile Haltekräfte und einfache Montage konzipiert. **Vertikalspanner»212« von Kukamet Massiver Haltearm für sichere Spannkräfte Haltekraft bis 1.000 N für stabile Fixierung Kompakter Arm: 94 mm Reichweite Befestigung über senkrechten Fuß möglich Dauerhafte Konstruktion für wiederholte Belastung Der Spanner überzeugt durch seinen massiven Haltearm, der aus schwarz brüniertem Material gefertigt ist und dauerhafte Resistenz gegen Verschleiß bietet. Diese robuste Ausführung reduziert Nacharbeit und erhöht die Lebensdauer in stärker beanspruchten Arbeitsumgebungen. Dank der kompakten Bauweise bleibt die Spannvorrichtung handlich, ohne Stabilität einzubüßen, was sie besonders geeignet macht für Werkstätten mit begrenztem Platz. Leistung und Sicherheit bei Spannprozessen Mit einer Druckkraft von 750 N und einer Haltekraft von 1.000 N eignet sich das Spannmittel für Anwendungen, bei denen konstante Fixierung wichtig ist. Die Kraftwerte ermöglichen sicheres Halten auch bei wiederkehrenden Bearbeitungen, wodurch Werkstücke weniger verrutschen und Fertigungsqualität steigt. Das erleichtert präzise Bearbeitungen und minimiert Nacharbeit. Einfache Montage und flexible Verwendung Die Befestigungsart mit senkrechtem Fuß erlaubt eine direkte Montage auf Maschinentisch oder Vorrichtung und sorgt für platzsparende Integration. Der 94 mm lange Arm bietet eine nützliche Reichweite für die übliche Spannhandhabung, das geringe Gewicht von 0,163 kg erleichtert Austausch und Positionsanpassung. Dadurch wird die Handhabung im Alltag effizienter und ergonomischer. Zielgruppe und empfohlene Einsatzgebiete Entwickelt für Handwerk und Industrie, richtet sich das Spannmittel an Anwender in Metallverarbeitung, Maschinenbau und Montage. Dort wird Wert gelegt auf schnelle Fixierung, Wiederholgenauigkeit und robuste Komponenten. Durch die einfache Befestigung und kompakte Abmessungen eignet sich das Produkt besonders für Arbeitsplätze mit häufigem Rüsten und kurzen Umrüstzeiten. Empfehlung: Das Kukamet Vertikalspanner 212 für zuverlässige Spannlösungen direkt über Metav beziehen — bei technischen Fragen oder Bedarf an weiteren Daten gerne per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: B212-1-D-C2 Marke: Kukamet Bezeichnung: Vertikalspanner 212 Zahlen Gewicht: 0,163 kg Arm: 94 mm Druckkraft max: 750 N Haltekraft max: 1.000 N Besonderheiten Befestigungsart: senkrechter Fuß Material: Schwarz brüniert Massiver Haltearm Storytrigger: hebelspanner FAQ Wie hoch ist die maximale Haltekraft des Vertikalspanner von Kukamet? Der Vertikalspanner von Kukamet erreicht eine maximale Haltekraft von 1.000 N und eignet sich damit für sichere Fixierung bei vielen Bearbeitungsaufgaben. Ist der Haltearm des Kukamet Vertikalspanner 212 besonders belastbar? Ja, das Modell 212 verfügt über einen massiven Haltearm, der für erhöhte Dauerfestigkeit konzipiert ist und sich für wiederholte Spannvorgänge eignet. Auf welche Weise wird der Vertikalspanner B212-1-D-C2 montiert? Die Montage erfolgt über den senkrechten Fuß, wodurch das Bauteil einfach auf Maschinentischen oder Vorrichtungen befestigt werden kann.
94mm Three-Point Vertical Clamp 750N Thrust, 1000N Hold, Massive Holding Arm, Black Oxide Finish - Kukamet
Benefit from a compact 94 mm reach combined with a massive holding arm and up to 1,000 N holding force for secure vertical clamping in jigs and fixtures; order the clamp directly via Metav Werkzeuge or contact our consultants for tailored advice. 211 Vertical Clamp — Massive holding arm, 94 mm reach (Kukamet) The 211 vertical clamp by Kukamet is a compact, heavy-duty vertical lever clamp designed for secure holding in jigs, fixtures and workshop benches, featuring a horizontal base for stable mounting. Massive holding arm for enhanced stability 94 mm reach for compact fixture designs Horizontal foot for secure bench mounting Up to 1,000 N holding force Reliable clamping performance that boosts productivity The unit delivers a defined clamping force of 750 N and a higher holding force of 1,000 N, which together ensure workpieces remain firmly in position during machining, assembly or inspection. The distinction between clamping and holding is important: the clamping force is the active compressive power applied during the toggle action, while the holding force denotes the resistance against external loads once the clamp is closed. These figures support repeatable setup cycles and reduce rework, contributing to a more efficient production flow and fewer stoppages. Space-saving mounting and robust construction for workshop use With a 94 mm reach and a horizontal foot for bench or fixture mounting, the clamp fits compact workstations and modular jig plates. The massive holding arm provides a solid contact area that minimises deflection under load, adding mechanical resilience without excessive bulk. At only 0.157 kg the unit keeps added mass to a minimum, which is beneficial when multiple clamps are mounted on light tooling plates or where quick manual repositioning is required. The blackened finish offers basic corrosion resistance and a professional appearance suited to industrial environments. Practical materials and simple upkeep explained The clamp’s blackened finish is a protective surface treatment that reduces glare and offers a hard-wearing layer against everyday wear. Routine maintenance is straightforward: periodic cleaning, a light lubrication of the pivot points and inspection of the lever mechanism preserve consistent clamping action. The simple mechanical design avoids complex electronics, so service and replacement parts are easy to manage within a small to medium-sized workshop. For customers looking to integrate a reliable mechanical clamp with minimal maintenance, this lever clamp presents a pragmatic solution. Contact Metav Werkzeuge in Emmerich for precise product matching, delivery options and technical guidance on the Kukamet 211 vertical clamp (SKU B211-1-D-C2) Technical Data Article number: B211-1-D-C2 GTIN: 8680731507621 Manufacturer: Kukamet Facts Arm reach: 94 mm Maximum holding force: 1,000 N Maximum clamping force: 750 N Weight: 0.157 kg eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Horizontal foot mounting Blackened finish (Schwarz brüniert) Type: vertical lever clamp (vertikalspanner) Model designation: 211 FAQ What is the difference between the clamping force and the holding force? The clamping force (750 N) is the active compressive force applied during closure; the holding force (1,000 N) is the resistance the closed clamp provides against external loads on the workpiece. The Kukamet 211 vertical clamp lists both values for clarity. Can the clamp be mounted on a workstation or fixture plate? Yes. The 211 features a horizontal foot for secure mounting to benches, fixture plates or jigs, making it suitable for workshop and production environments. Is the finish suitable for industrial use? The blackened finish provides wear resistance and reduces glare; with regular cleaning and light lubrication, the surface performs well under normal workshop conditions. What size reach does the clamp offer and why does it matter? The clamp has a 94 mm arm reach, which suits compact fixture designs where a balance of reach and minimal footprint is required. Is the mechanism serviceable and are replacement parts available? The mechanical lever design is straightforward to service; worn pivot components can be inspected and replaced as needed to restore original clamping performance for the Kukamet 211 (SKU B211-1-D-C2). Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
94mm Vertical Clamp 750N Closing Force, Massive Holding Arm, Zinc Plated - Kukamet
Take advantage of a compact, corrosion-resistant toggle clamp that pairs a massive holding arm with measured clamping capacity for dependable fixture work; the combination of a zinc-plated finish, a 94 mm reach and up to 1,000 N holding force supports stable, repeatable production. Order the clamp directly via Metav Werkzeuge or consult our team for specification advice. 211 Vertical Clamp by Kukamet — 94 mm arm, zinc-plated The 211 Vertical Clamp is a compact vertical toggle clamp with a horizontal base, designed for secure workholding in jigs and fixture assemblies. Robust solid holding arm 94 mm reach for compact fixtures Zinc-plated corrosion protection Holds up to 1,000 N clamping force Built for consistent, measurable clamping performance The vertical toggle design delivers repeatable positioning and measurable clamping behaviour that suits series production and workshop setups. With a maximum holding force of 1,000 N and a maximum clamping force of 750 N, the device converts manual lever movement into reliable holding power, reducing part movement during machining or assembly. The combination of sturdy mechanics and defined force values supports process control and reduces rework rates. Easy integration into compact jigs and fixtures A horizontal base enables secure mounting on flat plates and fixture boards while the 94 mm arm reaches into confined spaces without adding bulk. This compact footprint simplifies fixture layout and helps maintain clear access for tools and operators. The clamp’s geometry makes it suitable for nested fixtures or modular tooling systems where space efficiency and repeatability are priorities. Durable material and low-maintenance operation The main body is zinc-plated, providing corrosion resistance for workshop environments and prolonging service life where light exposure to humidity or coolant occurs. A solid holding arm construction minimises deflection under load, preserving clamping accuracy over time. Routine care is limited to keeping pivot points free of swarf and applying light lubrication; this straightforward upkeep supports long-term reliability without complex maintenance schedules. Lightweight, practical choice for everyday workholding At roughly 0.157 kg, the clamp combines minimal mass with robust clamping capability, making it easy to handle during fixture setup and replacement. The vertical toggle mechanism converts simple lever action into secure locking, improving operator ergonomics and speed when securing workpieces. For small-batch production or toolroom use, this clamp brings a balance of compact design and dependable holding power. For specification help or to place an order for the Kukamet 211 Vertical Clamp, contact Metav Werkzeuge for tailored advice and immediate supply at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: 211-1-D-C2 GTIN: 8680731505801 Model: 211 Category: Spanner Facts Arm length: 94 mm Holding force max: 1,000 N Clamping force max: 750 N Weight: 0.157 kg ECLASS: 21041717 ETIM: EC011973 Materials & features Zinc-plated material Horizontal base mounting Solid holding arm Vertical toggle clamp type Story trigger: lever clamp FAQ What clamping capacity can be expected from this type of clamp? The Kukamet 211 Vertical Clamp provides a maximum holding capacity of 1,000 N and a clamping capacity of 750 N, giving clear metrics for fixture design and process planning. How is the clamp mounted to a fixture plate? The clamp is fitted via a horizontal base suitable for screw mounting; the horizontal-foot design simplifies integration into jig plates and modular tooling. Is the clamp suitable for humid or machine-tool environments? The zinc-plated finish on the 211 offers corrosion resistance that is appropriate for typical workshop and machine-tool environments, though regular cleaning and light lubrication will extend service life. What is the effective reach of the clamping arm? The clamp has a 94 mm arm reach, allowing access into compact fixtures while keeping the overall footprint small. How heavy is the clamp and how does that affect handling? Weighing approximately 0.157 kg, the clamp is lightweight for easy handling during setup, yet engineered to provide robust holding performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
94mm Vertical Clamp 750N Pressure, 1000N Holding Force, Heavy-Duty Arm, Zinc-Plated - Kukamet
Combine a robust 94 mm solid arm, galvanised construction and up to 1,000 N holding force to deliver secure, repeatable clamping for fixtures and jigs; order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Kukamet Vertical Clamp 212 — galvanised vertical-foot clamp with 94 mm arm The Vertical Clamp 212 is a vertical-foot mounted toggle clamp engineered to secure workpieces reliably in assembly, machining and fixture applications. Vertical-foot mounting for stable installation 94 mm solid holding arm Holding force up to 1000 N Galvanised finish for corrosion resistance Consistent, measurable clamping performance for production use Designed for repeatability on the shop floor, the clamp delivers defined holding force up to 1,000 N and a pressing force of 750 N, enabling stable fixation of components during handling and light machining. The 94 mm arm provides adequate reach while maintaining rigidity; this combination reduces part movement and minimises rework. The galvanised surface finish contributes to long-term dimensional stability by resisting surface corrosion, ensuring the clamp keeps its calibrated behaviour in regular production cycles. Fast integration and secure operation in fixtures and jigs The vertical-foot mounting simplifies retrofit into existing tooling plates and bespoke jigs, offering a compact footprint and straightforward attachment. The solid holding arm and integrated safety lock prevent unintended release during setup or vibration-prone operations, improving operator confidence and process reliability. Low mass and compact dimensions make the clamp well suited to automated or semi-automated assemblies where space and repeatability are critical. Durable construction that supports uptime and low maintenance With a galvanised body and a reinforced design, the clamp resists rust and wears predictably over time, which translates into fewer replacements and lower life-cycle disruption. The robust build and simple mechanism reduce maintenance needs: routine inspection and lubrication are sufficient to maintain performance. For production environments seeking reliable clamping without frequent intervention, this solution offers a pragmatic balance of strength, longevity and minimal upkeep. For secure, shop-floor-ready clamping from Kukamet, contact Metav Werkzeuge in Emmerich for specification support and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 212-1-D-L-C2 GTIN: 8682843520291 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Max pressing force: 750 N Max holding force: 1000 N Arm length: 94 mm Weight: 0.125 kg Special features Mounting: vertical foot Material/finish: galvanised Solid holding arm Integrated safety lock FAQ What is the maximum holding force of the clamp? The maximum holding force is 1,000 N for the Kukamet vertical clamp (SKU 212-1-D-L-C2). Which mounting method is required for installation? A vertical-foot mounting is used for secure attachment to fixture plates and jigs. Is the clamp suitable for use in humid or mildly corrosive environments? The galvanised finish provides improved corrosion resistance, making the clamp suitable for environments where surface protection is required. How does the safety lock enhance operation? The integrated safety lock prevents accidental release of the holding arm during vibration or handling, contributing to safer, more reliable clamping cycles. What routine maintenance is needed to preserve performance? Periodic inspection and light lubrication of pivot points are sufficient to maintain reliable operation and prolong service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
94mm Vertical Clamp With Massive Holding Arm, 750N Thrust / 1000N Hold - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines reliable holding power and straightforward installation to keep production jigs and fixtures running smoothly; order the Vertical clamp 212 directly via Metav Werkzeuge or ask the consultants for integration advice. Vertical clamp 212 – Galvanised vertical-foot clamp with solid holding arm (Kukamet) The Vertical clamp 212 is a compact vertical-foot clamp designed for repeatable holding in assembly, jigging and light machining tasks, combining a galvanised finish with a solid holding arm for dependable performance. Solid holding arm for high rigidity Galvanised finish for corrosion protection Vertical-foot mounting for compact setups 94 mm arm length for versatile reach Holding force up to 1,000 N Reliable clamping where space is limited The unit delivers a consistent, measurable clamping and holding performance that supports efficient workflows on benches and fixtures. With a holding force of up to 1,000 N and a closing or operating force of 750 N, the device ensures workpieces remain stable during assembly and light operations. The 94 mm arm length provides reach without sacrificing compactness, while the vertical-foot mounting minimises the footprint on the work surface—helpful where bench space is at a premium. For non-specialist teams, the numeric force values indicate the clamp’s suitability for components that require steady pressure rather than heavy-duty machining. Built for durability and fast integration Constructed with a galvanised finish, the clamp resists corrosion in workshop environments and maintains appearance and function over time. The solid holding arm reduces flex under load, lowering the need for frequent readjustment and thus shortening set-up intervals. Weighing just 0.163 kg, the clamp is lightweight yet robust, allowing easy retrofitting into existing jigs. Technical simplicity—few moving parts and a vertical-foot fixing—means integration into fixtures and repeatability across production runs is straightforward, supporting lean assembly processes. Clear specification simplifies selection and replacement The clamp’s compact dimensions and distinct numeric specifications make comparison and procurement simple: vertical-foot mounting, 94 mm arm, galvanised material and defined force ratings allow planners to match the component to application requirements quickly. For purchasing and inventory, the product is supplied under SKU 212-1-D-C2 and GTIN 8680731501483, aiding traceability and reordering. Where drift-free holding is required for repetitive tasks, this clamp offers a reliable balance between rigidity and ease of use, reducing downtime associated with frequent adjustments or unsuitable clamping hardware. Contact Metav Werkzeuge for tailored advice on integrating the Vertical clamp 212 into fixtures or for a formal quotation; Metav Werkzeuge in Emmerich provides specialist guidance and reliable supply for workshop-scale and industrial requirements. Technical data Article number: 212-1-D-C2 GTIN: 8680731501483 Weight: 0.163 kg Material: galvanised Arm length: 94 mm Facts Operating (closing) force: 750 N Maximum holding force: 1,000 N ECLASS: 21041717 ETIM: EC011973 Special features Vertical-foot mounting Solid holding arm Compact, lightweight design Suitable for fixture and jig applications FAQ How much holding force does the clamp provide? The clamp provides a maximum holding force of up to 1,000 N, with an operating force of 750 N specified for the Vertical clamp 212. Is the finish suitable for workshop environments? Yes, the galvanised finish on the Vertical clamp 212 offers corrosion resistance suitable for standard workshop and assembly conditions. Can the clamp be mounted on existing jigs with limited space? The vertical-foot mounting and compact arm make the clamp suitable for integration into tight fixtures and benches where footprint is restricted. What is the arm reach and how does that affect positioning? The clamp has a 94 mm arm length, which gives versatile reach for a range of small to medium components while keeping the setup compact. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95mm Closure Clamp Horizontal Base Zinc-Plated, 7kN Holding Force - Kukamet
Take advantage of a robust, galvanised toggle clamp that combines high clamping and holding forces with compact installation. The combination of a horizontal base, a hook-equipped lever and a thread length of 95 mm ensures secure, repeatable fastening in jigs and fixtures. Order directly via Metav Werkzeuge or consult the team for application-specific advice. Kukamet 331 Toggle Clamp — Horizontal-base toggle clamp, galvanised, with hook The 331 Toggle Clamp is a workshop-grade fastening clamp designed for securing workpieces in production jigs and fixture applications where reliable holding and quick action are required. Galvanised finish for durable corrosion protection Horizontal base for stable bench or jig mounting Hook-equipped lever for secure quick fastening Clamping force up to 7,000 N; holding force 8,000 N Robust construction for long service life Built from galvanised steel, the clamp resists surface corrosion and is intended for demanding workshop environments. The protective coating reduces upkeep and extends service intervals compared with untreated parts, so maintenance downtime is kept to a minimum. With a compact mass of 0.72 kg, the design is lightweight yet robust enough to be integrated into mobile fixtures and stationary jigs alike, enabling consistent performance across repeated cycles. High-performance clamping and secure retention Engineered to deliver a maximum clamping force of 7,000 N and a holding force of 8,000 N, this toggle clamp provides clear, measurable benefits for process reliability. The lever mechanism with an integrated hook produces rapid locking action and a low-profile engaged position, which is advantageous where clearance is limited. The thread length of 95 mm allows for precise adjustment of contact position and helps compensate for part tolerances, ensuring secure fixation without over-stressing the workpiece. Flexible mounting and simple integration The horizontal base mounting enables straightforward attachment to tables, plates or fixture rails; the clamp is intended to be bolted down for a rigid connection. The threaded spindle accommodates standard adjustment tools and can be fine-tuned during setup to match specific component geometries. Because the clamp is designed for industrial use, it can be incorporated into existing jigs or new fixture concepts without bespoke adaptations, speeding up assembly of production tooling. Practical benefits for workshop and production use By combining a corrosion-resistant finish, compact mass and strong, repeatable clamping, this toggle clamp supports efficient workflows and consistent quality control. The rapid engagement of the lever reduces cycle times, while the robust holding force enhances operator confidence in part stability during machining, inspection or assembly steps. Metav’s supply and quality filter in Emmerich underpins availability and reliable sourcing, helping workshops and small production lines access proven fastening hardware without long lead times. Contact Metav Werkzeuge for tailored advice on fixture design and to secure the Kukamet 331 toggle clamp for reliable production or workshop fastening solutions Technical data Article number: 331-4 GTIN: 8680731506037 eClass: 21041718 Brand: Kukamet Numbers / Core technical data Weight: 0.72 kg Thread length: 95 mm Maximum clamping force: 7,000 N Maximum holding force: 8,000 N SKU: 331-4 Special features Galvanised finish Horizontal-base mounting Hook-equipped lever Category: Toggle clamp / Spanner FAQ What is the maximum clamping force of this toggle clamp? The Kukamet 331 toggle clamp provides a maximum clamping force of 7,000 N, with a holding force rated at 8,000 N for secure retention during processing. Can the clamp be adjusted for varying part heights? Yes. The threaded spindle with a 95 mm thread length allows the clamp to be adjusted to accommodate different workpiece heights and tolerances. Is the clamp suitable for workshop environments with occasional moisture? The galvanised finish on the 331 toggle clamp offers corrosion resistance suitable for typical workshop conditions; regular checks are recommended for harsher environments. How is the clamp mounted to a fixture or bench? This model uses a horizontal base for bolting to plates, benches or fixture rails, providing a stable and repeatable mounting solution. Which brand and SKU should be referenced when ordering? Reference Kukamet, model 331, SKU 331-4 when enquiring or placing an order to ensure the correct toggle clamp is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95mm Closure Clamp Vertical Base With Hook 7,000N Press Force 8,000N Holding Force 0.72kg - Kukamet
Take advantage of a compact, high‑force closure that combines robust holding capacity with a space‑saving vertical mount; order the latch clamp directly via Metav Werkzeuge or ask their consultants for application advice. Latch clamp 332 — Toggle latch clamp with hook, vertical base (Kukamet) Latch clamp 332 is a compact toggle latch designed for secure closures and fixture applications where a vertical base and a hooked connection are required. Robust blackened finish Vertical base for compact mounting Holding force up to 8,000 N Integrated hook for secure closure Consistent high force for secure closures The Latch clamp 332 provides reliable mechanical performance with a max pressing force of 7,000 N and a max holding force of 8,000 N, values that translate directly into repeatable clamping and low slip risk in production jigs. With a 95 mm thread length, the locking mechanism allows for precise adjustment during installation, enabling secure engagement even where components vary in thickness. The compact geometry keeps the clamping footprint small while delivering industrial‑grade holding capability. Quick installation and predictable operation Equipped with a vertical base, this toggle latch is designed for efficient mounting on upright panels or fixtures, simplifying alignment in confined work cells. The unit’s blackened finish offers a uniform surface treatment suited to workshop environments and improves resistance to visible wear. The integrated hook ensures immediate mechanical engagement, reducing cycle time for repetitive closing operations. At 0.72 kg, handling and repositioning during assembly or retrofit work is straightforward. Reduced downtime through repeatable mechanics A well‑matched latch reduces rework and speeds throughput by removing variability from the closure process. The toggle action guarantees a positive lock that is easy to operate and inspect, supporting lean production practices and predictable takt times. The mechanical values and construction help avoid gradual slippage under vibration, so fixtures maintain their set‑up between cycles. This contributes to lower stoppages and improved overall equipment effectiveness. Practical adjustment and long‑term serviceability The visible 95 mm thread allows installers to set clamping range precisely and to fine‑tune engagement without disassembling the fixture. The compact mass and standardised mounting interface make the latch suitable for retrofits or bespoke jigs. Routine inspection is uncomplicated thanks to the obvious mechanical parts and the straightforward hook engagement; replacement or adjustment can be carried out quickly to keep processes moving. Supplied by a recognised manufacturer, the component integrates into standard workshop workflows with minimal adaptation. For project enquiries or to discuss which configuration best suits a specific fixture, contact Metav Werkzeuge for specialist advice and fast supply from Emmerich. Technical Data SKU: B332-4 GTIN: 8680731508482 Manufacturer: Kukamet Facts Weight: 0.72 kg Thread length: 95 mm Max pressing force: 7,000 N Max holding force: 8,000 N Mounting: vertical base Finish: blackened Special features With hook: yes Product type: toggle latch / latch clamp eClass: 21041718 ETIM: EC011973 FAQ What holding capacity does this latch provide? The latch clamp 332 delivers a holding force of 8,000 N, offering a secure mechanical lock suitable for demanding fixture applications (SKU B332-4). Is the clamp suitable for vertical mounting only? The design includes a vertical base for upright mounting; this configuration is optimised for fixtures and panels that require a compact, vertical attachment point. What surface treatment does the clamp have? The unit is supplied with a blackened finish, which is the surface treatment specified for this model. How much adjustment travel is available? Adjustment is enabled by the 95 mm thread length, providing a broad range for setting engagement depth and accommodating variable component thicknesses. Who manufactures this component? This toggle latch is produced by Kukamet and supplied under SKU B332-4 for industrial clamping use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95mm Closure Clamp With Hook, Vertical Foot, 7,000N Thrust, 8,000N Holding Force, Blackened - Kukamet
Take advantage of the combination of high holding force, compact design and durable finish to secure reliable clamping in repetitive production tasks; order directly via Metav Werkzeuge or consult the team for application advice. Toggle Clamp 312 – Vertical-foot toggle clamp with 8,000 N holding force (Kukamet) The Toggle Clamp 312 is a vertical-base closing clamp designed for secure workholding in assembly, welding and fixturing applications. Holding force up to 8,000 N Vertical-foot mounting for stable setups Black-oxide finish for improved corrosion resistance Integrated hook for secure latching Robust clamping power for repeatable fixtures The unit delivers a holding force of 8,000 N with a maximum clamping (pressing) force of 7,000 N, providing a high safety margin for industrial fixturing. Such forces reduce part movement under load, which improves repeatability and minimises rework in batch production. The mechanical design converts lever action into consistent pressure, which is advantageous where pneumatic systems are not practical; the clamping behaviour is therefore predictable and easy to integrate into manual and semi-automated processes. Durable surface and secure latching for long service life A black-oxide finish gives the clamp enhanced resistance to corrosion while maintaining a low-friction surface that supports frequent actuation. The integrated hook offers a positive latching point that prevents accidental release during handling or vibration-heavy operations. With a nominal mass of 0.815 kg and a 95 mm thread length, the component balances robustness with manageable weight, allowing fast retrofitting to existing fixtures without substantial changes to the support structure. Compact mounting and consistent performance in production The vertical-foot mounting provides a compact footprint and stable attachment to flat bases, making the clamp suitable for jigs, welding tables and assembly benches where floor space is at a premium. The mechanical construction ensures low maintenance requirements and consistent clamping cycles over time, supporting uninterrupted workflow in small-batch and high-volume environments alike. Compatibility with standard fixture threads and straightforward replacement practice make the clamp a practical choice for workshops seeking reliable mechanical workholding. For secure, high-force clamping in demanding production environments, contact Metav Werkzeuge for specification verification and ordering guidance — Metav Werkzeuge can advise on integration and supply from their Emmerich facility. Technical data SKU: B312-4 GTIN: 8680731508352 Product: Toggle clamp 312 Core measurements Weight: 0.815 kg Thread length: 95 mm Maximum pressing force: 7,000 N Holding force: 8,000 N ECLASS: 21041718 ETIM: EC011973 Materials and special features Material: black-oxide (schwarz brüniert) Mounting type: vertical-foot Feature: with hook Category: spanner Storytrigger: lever clamp FAQ What clamping and holding forces does the clamp provide? The Toggle Clamp 312 provides a maximum pressing force of 7,000 N and a holding force of 8,000 N, suited to secure parts during machining and assembly. Is the clamp suitable for welding fixtures? Yes, the vertical-foot design and black-oxide finish make the clamp appropriate for welding and assembly fixtures where stable attachment and moderate corrosion resistance are required. What mounting arrangement is required for installation? The unit is designed for vertical-foot mounting to a flat base and uses a threaded spindle with a 95 mm thread length for adjustment and fixation. Can the clamp be used in vibration-prone environments? The integrated hook and mechanical lever action provide a positive latch that reduces the risk of accidental release under vibration. What is the product mass and how does it affect retrofitting? At 0.815 kg, the clamp is heavy enough for robust clamping yet light enough for straightforward retrofitting to existing fixtures and jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95mm Three-Point Toggle Clamp Vertical Foot, 7,000N Push Force, Stainless Steel, Hooked - Kukamet
Robust stainless steel toggle latch delivering up to 8,000 N holding force with a compact vertical-base mounting; combines high clamping capacity and corrosion resistance for dependable fixture performance. Take advantage of secure locking with the integrated hook and straightforward installation — order the closure clamp directly via Metav Werkzeuge or contact the consultants for integration advice. Closure clamp 312 — Kukamet stainless-steel toggle latch with vertical base Closure clamp 312 is a heavy-duty toggle latch designed for secure closure and repeatable clamping in production fixtures and jigs Stainless steel construction for longevity Vertical base for compact mounting Maximum holding force 8,000 N Integrated hook for positive locking Repeatable clamping that keeps production moving The latch is engineered for consistent performance under frequent use. With a rated holding force of 8,000 N and a clamping (pressing) force of 7,000 N, the device ensures reliable fixation of parts during machining, assembly and transport. The combination of a robust lever mechanism and a threaded connection with 95 mm thread length provides mechanical advantage and precise adjustment. Using a corrosion-resistant stainless steel body reduces downtime associated with surface degradation, keeping fixtures operational for longer periods and lowering maintenance intervals. Corrosion resistance and low maintenance for industrial environments Constructed from stainless steel, the latch resists oxidation and chemical exposure common in workshop and industrial atmospheres. The material choice supports repeated cleaning and aggressive environments without loss of function. The compact mass of 0.815 kg and the vertical-base design allow installation in confined spaces where floor or horizontal mounts are impractical. This durability translates into fewer replacements and a predictable service life, contributing to a better total cost of ownership for workshop managers and procurement teams focused on long-term reliability. Compact design with secure locking and easy integration The vertical-foot mounting is optimised for fixtures with constrained footprints, while the integrated hook provides a positive mechanical lock that prevents accidental release. The latch’s mechanical simplicity supports high-speed cycle applications and straightforward retrofit into existing jigs. Where fine adjustment is required, the threaded engagement offers repeatable positioning and clamping travel control. As a component in clamping technology, this toggle latch supports consistent assembly quality and reduces variability in downstream processes. Contact Metav Werkzeuge today for specification matching and installation guidance on the Kukamet Closure clamp 312 (S312-4); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S312-4 GTIN: 8680731509540 Material: Stainless steel Weight: 0.815 kg Catalog page: 312-katalogseite.pdf Numerical data Maximum clamping force: 7,000 N Maximum holding force: 8,000 N Thread length: 95 mm ECLASS: 21041718 ETIM: EC011973 Special features Mounting type: vertical base With hook: yes Category: Spanner Story trigger: lever clamp FAQ What is the primary application of this closure latch? The Closure clamp 312 (Kukamet S312-4) is intended for securing components in fixtures, jigs and transport applications where repeatable mechanical locking is required. Can the latch be used in corrosive environments? Yes, the stainless-steel construction of the Kukamet Closure clamp 312 provides enhanced resistance to corrosion and supports use in demanding workshop conditions. How much clamping force does the latch provide? The device offers a maximum clamping force of 7,000 N and a maximum holding force of 8,000 N, suitable for heavy-duty clamping tasks. Is the latch suitable for compact mounting situations? The vertical-base design and a compact mass of 0.815 kg make the latch well suited to confined mounting slots and compact fixture arrangements. What adjustment options are available for alignment and travel control? Adjustment is achieved via the threaded engagement (95 mm thread length) to set clamping travel and ensure precise, repeatable positioning for production use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95mm Toggle Clamp With Hook, 7kN Thrust, 8kN Holding Force, Zinc Plated - Kukamet
Take advantage of the combination of high clamping and holding forces, robust zinc‑plated corrosion protection and a space‑saving vertical base for reliable fixture security in production environments — order the locking clamp directly via Metav Werkzeuge or ask our consultants if needed. Locking clamp 312 — vertical‑base locking lever clamp, zinc‑plated (Kukamet) The Locking clamp 312 is a vertical‑base locking lever clamp designed for secure closure and fixture operations in industrial assembly and jigs. Vertical base for stable mounting Zinc‑plated corrosion resistance Closing force 7,000 N, holding 8,000 N Hook‑equipped for flexible latching Robust clamping performance for precise fixtures The clamp delivers significant force while maintaining repeatable engagement, with a closing force of 7,000 N and a holding force of 8,000 N, values that ensure secure fixation under dynamic loads. These figures indicate the maximum compressive and retention capabilities respectively; the first reduces movement during clamping, the second prevents unintended release during handling or machining. The mechanism is engineered as a locking lever clamp, offering consistent clamping cycles and reduced setup times in production runs. For workshop planners and process engineers this translates to fewer reworks and improved cycle reliability. Durable finish and compact mounting for harsh environments Corrosion resistance is provided by a zinc‑plated surface, reducing the need for frequent replacement in humid or mildly corrosive settings. The vertical mounting arrangement — listed as a vertical base — allows the device to be fixed with a small footprint while keeping the lever path clear, ideal for tight fixturing arrangements. Thread engagement is substantial, with a thread length of 95 mm, and the unit weight of 0.815 kg makes it easy to handle during assembly without compromising stability. Together these attributes support long service intervals and straightforward integration into existing tooling plates. Fast, adaptable latching with secure hook connection Equipped with a hook for flexible engagement points, the unit uses a positive lever action to transform operator input into reliable clamp movement. The mechanical advantage inherent to the toggle principle ensures rapid clamping and secure locking without excessive operator force, improving ergonomics at the workstation. As a toggle clamp style device it suits repetitive tasks such as mould fixtures, transport closures and assembly stations where quick engagement and release are required, while maintaining repeatable positioning for quality assurance. Wide applicability and simple maintenance for workshop use Designed with robust, low‑maintenance mechanics, this locking clamp suits a variety of fixture tasks and is compatible with common jigs and closure panels used in workshops and light industry. The model is supplied by Kukamet and identified as SKU 312-4, which aids procurement and stock management. Routine inspection is limited to checking the plated surface for wear and ensuring the hook and pivot points remain free of debris; lubrication intervals depend on duty cycle but are straightforward to implement in preventive maintenance schedules. For procurement or technical clarification regarding Kukamet locking clamp 312, contact Metav Werkzeuge for supply and advice — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 — Metav Werkzeuge supports reliable sourcing and application guidance from Emmerich Technical Data SKU: 312-4 GTIN: 8680731502381 Brand: Kukamet Product: Locking clamp 312 Facts Closing force: 7,000 N Holding force: 8,000 N Thread length: 95 mm Weight: 0.815 kg Special features Material: zinc‑plated Mounting type: vertical base Hook-equipped No additional special features FAQ What maximum forces does the clamp provide? The clamp offers a closing force of 7,000 N and a holding force of 8,000 N; the Locking clamp 312 is therefore suitable where high retention and secure closure are required. How is the clamp mounted to a fixture? Mounting is via a vertical base so the clamp is bolted in an upright position; the thread engagement of 95 mm supports secure attachment to plates and tooling blocks. Is the surface finish corrosion resistant? Yes, the component is zinc‑plated to enhance corrosion resistance for typical workshop and light industry environments. Does the clamp include a hook for varied engagement points? The device is delivered with a hook for flexible latching, allowing connection to different anchor points in fixtures and closures. Which SKU should be ordered for this model? Order SKU 312-4 for this specific locking clamp; referencing the SKU facilitates correct supply from Kukamet via Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 1200 N Pneumatic Clamp Horizontal Foot, Massive Holding Arm, Zinc-Plated - Kukamet
Take advantage of the combination of reliable pneumatic actuation, zinc-plated durability and a massive holding arm for consistent clamping in repetitive production tasks. Order the 611 pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. 611 Pneumatic clamp — Kukamet, 1,200 N pressing force, zinc-plated The 611 pneumatic clamp is a horizontally mounted lever clamp designed for workshop and production fixturing, providing dependable pneumatic clamping with a compact footprint. Kukamet 611 pneumatic clamp with horizontal foot Zinc-plated body for corrosion resistance Maximum pressing force 1,200 N Holding force up to 1,400 N Consistent cycle performance for production lines The 611 delivers pneumatic actuation that converts compressed-air control into consistent, repeatable clamping. With a maximum pressing force of 1,200 N and a holding force up to 1,400 N, the device supports short cycle times while maintaining fixture accuracy. The controlled motion reduces stamping or deformation risks on delicate components and helps standardise clamping results across batches, contributing to higher throughput and fewer rejects. Built to last in workshop environments Constructed with a zinc-plated finish and a massive holding arm, the clamp resists corrosion and mechanical wear typical in industrial settings. The 162 mm arm and a locking angle of 95° provide robust leverage and a secure clamping position for repetitive operations. The horizontal-foot mounting method ensures a low-profile installation that integrates well with existing jig plates and tooling frames, reducing the need for fixture redesign. Simple integration and predictable operation Designed for straightforward fixture integration, the horizontal foot mount and lever-style actuation allow quick alignment on machine tables and jigs. The unit’s compact dimensions suit confined assembly stations while the pneumatically driven mechanism offers precise control when paired with standard air valves. Documentation and a catalogue page are available to support specification checks and rapid procurement planning for production environments. For reliable, repeatable clamping in high-cycle production choose the Kukamet 611 pneumatic clamp — contact Metav Werkzeuge in Emmerich for technical details and procurement support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 611-2-D-C3 GTIN: 8680731504873 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Maximum pressing force: 1,200 N Maximum holding force: 1,400 N Arm length: 162 mm Clamping angle: 95° Special features Mounting: horizontal foot Material: zinc-plated Massive holding arm Lever clamp design Catalogue page available (PDF) FAQ What pressing force can be expected from this clamp? The 611 pneumatic clamp from Kukamet provides a maximum pressing force of 1,200 N and a holding capacity of up to 1,400 N for secure fixture retention. Is the clamp suitable for repeated production cycles? Yes; the pneumatic actuation and robust construction of the 611 are designed for repetitive clamping tasks in workshop and production environments. How is the clamp mounted to a fixture? Mounting is via a horizontal foot that permits low-profile installation on jig plates and tooling frames. What material is the clamp made from? The clamp features a zinc-plated finish for corrosion resistance and long-term serviceability. Where can the specification sheet be found? A catalogue page and technical documentation are available for the Kukamet 611 pneumatic clamp to verify dimensions and integration details. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 1200 N Pneumatic Clamp With Horizontal Foot, Massive Holding Arm, Zinc-Plated - Kukamet
Combine 1,400 N holding force, a heavy-duty galvanised arm and a stable horizontal mounting to secure workpieces reliably in repetitive production. Order the Pneumatic Clamp 631 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Clamp 631 by Kukamet — 1,400 N holding force, 112 mm arm The Pneumatic Clamp 631 is a compact pneumatic clamping unit designed for fixed jigs and fixtures where reliable, repeatable clamping and straightforward installation are required. Heavy-duty holding arm for secure clamping Horizontal base foot for stable mounting Galvanised steel construction for corrosion resistance Up to 1,400 N holding force Consistent clamping performance for continuous workflows The clamp delivers a clear mechanical advantage by combining a 1,400 N holding force with an actuation force of 1,200 N, which makes it suitable for demanding clamping tasks in assembly and machining jigs. The specified forces indicate how firmly a workpiece is held and how reliably the clamping action repeats cycle after cycle; this improves process stability and reduces rework. The pneumatic actuation ensures fast, controlled motion that can be integrated into automated sequences, offering measurable improvements in throughput where repeatability matters. Built for durability and safe mounting Constructed from galvanised steel with a heavy-duty holding arm, the unit resists typical workshop wear and offers prolonged service life in indoor industrial environments. A horizontal base foot provides a low-profile, rigid mounting option that minimises flex under load, while the 112 mm arm length balances reach and rigidity for standard fixture layouts. The clamp locks at a 95° operating angle, delivering a secure mechanical end position that supports repeatable locating and reduces micro-movements during processing. Practical integration and application benefits The compact design and standardised mounting make this pneumatic clamping unit straightforward to fit into custom jigs, conveyors and automated fixtures. Where regular tool changes or quick part swaps are required, the pneumatic operation reduces manual effort and cycle time compared with manual toggles. Supplied by a recognised manufacturer and distributed through Metav’s quality-controlled supply chain, the unit combines reliable manufacture with the assurance of consistent European distribution and spare-part availability. Contact Metav Werkzeuge for tailored procurement advice and order processing: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 631-2-D-C2 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Core specifications Arm length: 112 mm Operating angle: 95° Max actuation force: 1,200 N Max holding force: 1,400 N Special features Galvanised steel construction Horizontal base foot for mounting Heavy-duty holding arm Compact pneumatic clamping unit Included catalogue page (PDF available) FAQ What holding and actuation forces are specified? The clamp provides a maximum holding force of 1,400 N and a maximum actuation force of 1,200 N as standard specifications for secure clamping. How is the unit mounted to a fixture? Mounting is via a horizontal base foot, allowing rigid attachment to jigs or plates; the 112 mm arm and 95° operating angle facilitate standard fixture integration. What material is the clamping unit made from? The body and arm are galvanised steel, providing corrosion resistance suitable for typical indoor industrial use. Is the clamp suitable for automated lines and repetitive cycles? Yes—pneumatic actuation and a repeatable locking angle make the unit appropriate for automated fixtures and high-frequency clamping operations. Which manufacturer and distributor are associated with this product? The clamp is manufactured by Kukamet and is distributed via Metav’s supply channel; see product SKU 631-2-D-C2 for ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 1200 N Pneumatic Clamp With Massive Holding Arm, Zinc-Plated, Horizontal Base - Kukamet
Take advantage of a compact pneumatic clamping solution that combines consistent pneumatic actuation, a heavy-duty 162 mm holding arm and a galvanised finish for long service life; order directly via Metav Werkzeuge or consult the Metav team for application advice. 631 Pneumatic Clamp by Kukamet — Galvanised with 1,200 N clamping force The robust 631 Pneumatic Clamp is a pneumatic toggle clamp engineered for repetitive industrial clamping tasks, supplied with a horizontal foot for secure fixture mounting. Galvanised construction for corrosion resistance 1,200 N pneumatic clamping force 1,400 N maximum holding force Heavy-duty 162 mm holding arm Consistent force control for repeatable production The pneumatic actuation delivers a stable 1,200 N clamping force, while the design provides a separate 1,400 N holding capacity to secure parts during vibration-sensitive operations. This separation of clamping and holding ratings ensures that the fixture maintains position after actuation; because the actuator is pneumatic, cycle-to-cycle variability is reduced, supporting higher first-pass yields and fewer rework cycles. The mechanism suits serial work where reproducible process parameters are required. Built for workshop resilience and rigidity Constructed from galvanised components and fitted with a heavy-duty arm, the clamp resists corrosion and mechanical wear in demanding environments. The 162 mm arm length provides reach into jigs while limiting deflection under load, and the roughly 95° operating angle gives predictable movement for compact fixture layouts. The horizontal foot mounting offers a stable footprint on base plates or fixture rails, reducing the need for additional bracing and enabling a low-profile installation. Fast integration with standard identification for procurement The clamp is prepared for straightforward procurement and inventory control: SKU 631-2-D-C3 and GTIN 8682843521618 identify the item for ordering and stockkeeping. Installation requires a regulated compressed-air supply and standard fastenings for the horizontal foot; maintenance is limited to periodic checks of seals and mounting hardware, keeping downtime and service effort to a minimum. The compact footprint and repeatable stroke make the component suitable for retrofits as well as new production cells. Application fit and operational benefits Designed for repetitive clamping in assembly, welding and machining fixtures, the unit improves cycle reliability and reduces manual handling. The combination of pneumatic actuation and a substantial holding arm delivers quick actuation times paired with secure part retention, which translates into measurable productivity gains on repetitive operations. As a supplier, Metav Werkzeuge combines distribution reach with technical expertise, offering access to a broad product range and industry knowledge to support smooth integration. For secure, repeatable clamping choose the Kukamet 631 and contact Metav Werkzeuge for tailored technical advice and supply — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: 631-2-D-C3 GTIN: 8682843521618 Brand: Kukamet Numbers / Core technical data Max clamping force: 1,200 N Max holding force: 1,400 N Arm length: 162 mm Operating angle: 95° Special features / Versions Galvanised material Horizontal foot mounting Heavy-duty holding arm Pneumatic actuation FAQ What clamping and holding forces are provided? The clamp offers a clamping force of 1,200 N and a maximum holding force of 1,400 N, values stated for the Kukamet 631 pneumatic clamp (SKU 631-2-D-C3). How is the clamp mounted in a fixture? Mounting is via a horizontal foot; the Kukamet 631 is designed for secure base-plate or fixture-rail attachment using standard fastenings. What material finishes are used for longevity? The device is galvanised, providing corrosion resistance suitable for workshop environments and prolonging component life. Is the actuator pneumatic or mechanical? The unit uses pneumatic actuation to deliver consistent, repeatable clamping strokes and quick cycle times. Which industries benefit most from this clamp? Assembly, welding, and machining operations that require repetitive, reliable part retention will benefit from the Kukamet 631 pneumatic clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 1200 N Pneumatic Clamp, Massive Holding Arm, Horizontal Base, Zinc-Plated - Kukamet
The combination of a galvanised, maintenance-friendly design, a 1,400 N holding force and a 162 mm massive holding arm ensures reliable fixation and long service life in production jigs; order the clamp directly via Metav Werkzeuge or consult the technical team for application advice. Pneumatic clamp 612 by Kukamet — 1,400 N holding force, 162 mm arm The pneumatic clamp 612 is a horizontal-base pneumatic toggle clamp designed for secure workpiece fixation in light- to medium-duty industrial jigs and fixtures. Galvanised, corrosion-resistant construction 1,400 N maximum holding force 162 mm massive holding arm Horizontal base for stable mounting Reliable clamping force for repeatable production The 612 delivers a 1,400 N holding force, combined with a 1,200 N actuation force, providing consistent clamping performance that reduces rework and downtime. The distinction between actuation and holding forces is important: the actuation value describes the input force the pneumatic system applies, while the holding value specifies the maximum static load the clamp will safely maintain. This separation of data supports informed fixture design and ensures the clamp is specified to match the intended process load. Robust, low-maintenance construction for workshop use Constructed from galvanised components and featuring a massive holding arm, this toggle clamp is built to withstand frequent cycling in a workshop or small production environment. The zinc coating improves corrosion resistance, extending service life where coolant, chips or ambient moisture are present. The horizontal base provides a stable mounting platform that simplifies integration into existing jigs and reduces vibration-related loosening, supporting steady repeatability across production batches. Fast integration and precise positioning in fixtures With a 162 mm arm and a 95° locking angle, the clamp facilitates secure and repeatable positioning of workpieces while preserving access for machining or assembly operations. The toggle-style mechanism locks positively at the specified angle, preventing unintended release. Because the design is compact and surface-mountable via the horizontal foot, the clamp is well suited for modular fixture plates and dedicated assembly stations where quick installation and reliable fixation are required. Pneumatic operation for safe, controlled handling Pneumatic actuation delivers controlled, powerful strokes without manual strain, making the clamp suitable for repetitive use and automated applications. The toggle principle ensures that once engaged, the clamp holds securely even if pressure varies slightly, which is particularly useful for semi-automated lines. Maintenance routines are simplified by the robust arm and galvanised finish, meaning fewer interventions and a predictable lifecycle for preventive upkeep. For tailored application advice or to secure the Kukamet 612 for production use, contact Metav Werkzeuge for ordering and technical support via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data SKU: 612-2-D-C3 Brand: Kukamet Product type: pneumatic clamp Core data Arm length: 162 mm Maximum holding force: 1,400 N Maximum actuation force: 1,200 N Locking angle: 95° Special features Material: galvanised Mounting: horizontal base Massive holding arm eCl@ss: 21021004 ETIM: EC011973 FAQ What is the maximum holding force of this clamp? The Kukamet 612 pneumatic clamp provides a maximum holding force of 1,400 N, with an actuation force of 1,200 N for reliable fixation. How is the clamp mounted in a fixture? The clamp is supplied for horizontal base mounting, allowing secure attachment to fixture plates and stable installation in jigs. What is the length and design of the holding arm? The clamp features a 162 mm massive holding arm, designed for robust contact and reduced deformation under load. Is the clamp suitable for humid or coolant-exposed environments? The galvanised finish of the 612 improves corrosion resistance, making it suitable for workshops where moisture or coolant contact occurs. What locking angle does the toggle mechanism provide? The toggle mechanism locks at a 95° angle, ensuring positive engagement and secure retention of the workpiece. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 167mm Pneumatic Clamp With Horizontal Foot, Massive Holding Arm, 2,000N Push / 2,500N Hold, Galvanised - Kukamet
Secure and repeatable clamping is achieved by the combination of a massive holding arm, galvanised construction and up to 2,500 N holding force, delivering stability on production lines and fixtures. Order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Clamp 611 — horizontal-foot mounting, 2,500 N holding force (Kukamet) The Pneumatic Clamp 611 is a compact pneumatic clamping unit designed for fixture and jig work, offering a robust holding arm and galvanised finish for demanding workshop and industrial environments. Horizontal-foot mounting for fixture integration Massive holding arm for high rigidity Galvanised finish for corrosion resistance 2,500 N maximum holding force High clamping performance for steady production The actuator delivers a clear performance advantage: a 2,000 N cylinder force combined with a 2,500 N holding force provides reliable workpiece retention and reduces slippage during machining. This level of force control supports shorter cycle times and fewer rework operations, as consistent clamping reduces positional error. The specification of forces is useful for process planning and ensures the unit suits medium to heavy production tasks. Robust design that endures workshop conditions Constructed with a galvanised finish and a massive holding arm, the unit resists corrosion and mechanical wear in everyday use. The arm length of 167 mm provides an extended reach for versatile clamping positions while the 95° locking angle enables compact integration into fixtures. These attributes translate into longer service intervals and lower lifecycle costs when compared with lightweight alternatives. Easy integration and predictable behaviour in fixtures The horizontal-foot mounting simplifies attachment to plates and t-slotted tables commonly used in jigs and fixtures, ensuring repeatable placement during assembly. Pneumatic actuation allows fast, controllable movement and straightforward connection to existing compressed-air systems. Technical specifiability and the clear mechanical interface mean the unit can be included in automation routines with predictable timing and force characteristics. For reliable clamping performance choose the Kukamet Pneumatic Clamp 611 — contact Metav Werkzeuge for purchasing advice or technical clarification at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 611-3-D-C3 GTIN: 8680731505184 eClass: 21021004 ETIM: EC011973 Core technical data Arm length: 167 mm Cylinder force (max): 2,000 N Holding force (max): 2,500 N Locking angle: 95° Design and features Horizontal-foot mounting Massive holding arm Galvanised material Pneumatic clamp, model 611 FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 2,500 N; this value defines the peak retention capacity for the Kukamet pneumatic clamp (SKU 611-3-D-C3). Which mounting option is used for integration into fixtures? Horizontal-foot mounting is supplied for secure attachment to fixture plates and t-slotted tables, enabling repeatable positioning in jigs. What materials is the clamp suitable for when used in machining setups? Material suitability depends on the application, but the robust construction and clamping forces make the unit suitable for typical metalworking and assembly operations where reliable fixation is required. How long is the reach of the holding arm? The holding arm length is 167 mm, offering extended reach for diverse clamping positions within fixtures. What protects the clamp against corrosion in workshop environments? A galvanised finish provides corrosion resistance, increasing durability in standard workshop atmospheres. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 2000 N Pneumatic Clamp With Horizontal Base, Massive Holding Arm, Galvanised - Kukamet
Take advantage of a robust, pneumatic clamping solution that combines a 2,500 N holding capacity, a massive galvanised holding arm and a compact horizontal base for secure, repeatable positioning; order the 631 pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. 631 Pneumatic toggle clamp — 2,500 N holding force, galvanised construction The 631 pneumatic clamp is a pneumatically operated toggle clamp designed for demanding fixture and workholding tasks in production, assembly and routing jigs. Pneumatic action for fast clamping 2,500 N maximum holding force Galvanised construction for corrosion resistance Horizontal base with 95° clamping angle Reliable clamping power for repeatable production The unit provides a consistent 2,500 N holding force while the pneumatic actuation delivers the necessary closing energy with a drive force of 2,000 N, enabling short cycle times and steady results in repetitive processes. This level of clamping capacity secures medium‑ to heavy‑weight workpieces and reduces the risk of part movement during machining or assembly. The design translates specification into throughput: fewer rejects, less rework and improved process stability across batch runs. Built to withstand workshop conditions Constructed from galvanised components and featuring a massive holding arm, the clamp resists corrosion and maintains alignment under continuous load. The robust arm and body reduce elastic deformation during clamping, so setting and adjustment remain reliable over long operational periods. The corrosion protection supports use in mixed workshop environments where lubricants and coolants are present, extending service life and lowering lifecycle maintenance. Compact mounting and straightforward integration A horizontal base simplifies installation into fixtures and tooling plates, while the 117 mm arm length and 95° clamping angle deliver predictable clearance and part accommodation in tight jigs. The pneumatically driven toggle mechanism integrates with existing compressed‑air networks and allows automated sequencing in production cells. The compact footprint helps retain access for operators and tools, while the lever‑style arrangement offers a clear mechanical lock for safe, visible clamping. Practical applications and efficiency gains Engineered for use in fixture systems, welding jigs, assembly lines and CNC stations, this clamp improves cycle consistency and operator safety by reducing manual handling. The combination of pneumatic actuation and mechanical toggle locking ensures repeatable clamp pressure and fast release, which supports higher throughput and a smoother production flow. For buyers seeking standardised, durable clamping elements, the design balances performance with low maintenance requirements. Contact Metav Werkzeuge for application advice and to arrange supply of the 631 pneumatic clamp — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and delivery options Technical data Article number: 631-3-D-C2 Name: Pneumatic clamp Model: 631 Manufacturer: Kukamet eCl@ss: 21021004 ETIM: EC011973 Core data Arm length: 117 mm Maximum drive force: 2,000 N Maximum holding force: 2,500 N Clamping angle: 95° Special features Galvanised material Horizontal base mounting Massive holding arm Pneumatic toggle (lever) clamp FAQ What clamping capacity does this unit offer? The 631 pneumatic clamp provides a maximum holding force of 2,500 N, with pneumatic drive force rated at 2,000 N, suitable for medium‑weight fixtures and production jigs. Is the clamp suitable for use in corrosive or coolant‑exposed environments? The clamp features galvanised construction and a robust arm design, which improves resistance to corrosion and makes it appropriate for workshop environments where coolants or cleaning agents are used. How is the clamp mounted in a fixture? This version uses a horizontal base for secure attachment to tooling plates and jig fixtures; the 117 mm arm length and 95° clamping angle support predictable part clearance and positioning. Can the clamp be integrated into automated production sequences? Yes, the pneumatic actuation integrates with compressed‑air systems and can be sequenced within production cells to provide rapid, repeatable clamping and release. Which manufacturer and SKU identify this product? The clamp is supplied by Kukamet and is listed under SKU 631-3-D-C2 as the 631 pneumatic toggle clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 200mm Pneumatic Clamp Horizontal Base, Massive Holding Arm, 3,000 N Pressing Force, Galvanised - Kukamet
Taking advantage of the galvanised construction, the massive 200 mm holding arm and the strong 3,300 N holding capacity ensures consistent, secure workholding in repetitive production and workshop fixtures; Order the pneumatic clamp 631 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 631 — Horizontal-foot pneumatic clamp with 200 mm arm by Kukamet The 631 pneumatic clamp is a sturdy, lever-type clamping solution for production jigs and workshop fixtures, designed to deliver fast, repeatable clamping at a near-vertical clearance angle for easy loading and unloading. Robust galvanised construction 200 mm heavy-duty holding arm 3,300 N maximum holding force Horizontal foot for stable mounting Secure clamping that keeps production moving The Pneumatic clamp 631 brings reliable workholding to repetitive processes where consistency matters. The combination of a robust holding arm and a stable mounting interface reduces part movement during machining or assembly, which lowers rework rates and increases yield. By translating the clamping specification into predictable part security, this device supports higher throughput and fewer stoppages in fixture-based operations. Fast, consistent actuation for efficient cycles Equipped with pneumatic actuation, this clamp provides rapid pneumatic actuation and repeatable force application, which is particularly valuable on automated or semi-automated lines. The 3,300 N maximum holding force and 3,000 N maximum pressing force are expressed as measurable performance parameters that enable planners to size fixtures precisely and compare solutions objectively. Consistent clamping force shortens cycle time variability and improves process stability. Built to withstand workshop conditions The clamp’s galvanised finish and massive holding arm are designed for durability in demanding environments. The 200 mm arm length offers an extended reach for larger workpieces without sacrificing stiffness, while the 95° angle ensures good clearance and ergonomic handling during loading. The horizontal foot simplifies secure mounting to plates or tooling blocks, helping to maintain alignment under load and reduce fixture complexity. Integrates with fixtures and improves operator safety Designed as a lever-type pneumatic clamp, it is straightforward to incorporate into jigs, pallet systems and assembly stations where fast engagement and release are required. The combination of measurable holding force and a stable base reduces the need for frequent manual re-adjustment, supporting safer working practices and less operator fatigue. Simple inspection and routine maintenance preserve performance over time and protect production reliability. Contact Metav Werkzeuge to discuss how the Kukamet pneumatic clamp 631 (SKU 631-4-D-C3) can be integrated into existing fixtures; call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and shipment from Emmerich. Technical data Article number: 631-4-D-C3 Product name: Pneumatic clamp 631 Manufacturer: Kukamet eCl@ss: 21021004 ETIM: EC011973 Facts Arm length: 200 mm Maximum holding force: 3,300 N Maximum pressing force: 3,000 N Clamping angle: 95° Special features Galvanised finish Horizontal foot mounting Massive holding arm Lever-type pneumatic clamp FAQ What is the maximum holding force of this clamp? The clamp delivers a maximum holding force of 3,300 N, specified for the Pneumatic clamp 631 (Kukamet, SKU 631-4-D-C3). Can the clamp be mounted on standard tooling plates? Yes, the horizontal foot design allows secure mounting to tooling plates and fixture bases commonly used in workshop and production environments. What benefits does pneumatic actuation provide compared with manual clamping? Pneumatic actuation offers rapid, repeatable clamping and consistent force application, which improves cycle-time reliability and reduces operator handling compared with manual lever clamping. Is the clamp suitable for heavy-duty use in a production environment? The galvanised construction and massive holding arm are engineered for durability, making the device appropriate for repetitive production tasks and robust workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 20mm Pneumatic Clamp Horizontal Base Massive Holding Arm, 750N Push 1000N Hold, Zinc-Plated - Kukamet
The combination of pneumatic actuation, a massive galvanised holding arm and a compact 94 mm reach delivers reliable, repeatable clamping for small to medium fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. 611 Pneumatic clamp — pneumatic bench clamp with 1,000 N holding force by Kukamet 611 Pneumatic clamp is a bench-mounted pneumatic clamping device designed for secure, repeatable fixation in assembly and machining operations, featuring a horizontal-foot base for stable attachment. Pneumatic actuation for fast clamping Max. holding force 1,000 N Galvanised steel for corrosion resistance Horizontal-foot mounting for bench fitting Consistent clamping for repetitive production The pneumatic actuation of this clamp ensures rapid, consistent motion that reduces cycle times in repetitive tasks. With a max. holding force of 1,000 N and an actuation pressure capability up to 750 N, the device provides a dependable clamp force that keeps parts secure during processing. The robust design minimises positional drift and supports higher throughput without manual adjustment, turning a mechanical task into a reliably controlled process. Built to withstand workshop conditions Constructed from galvanised steel and featuring a massive holding arm, the clamp resists corrosion and mechanical wear in demanding environments. The horizontal-foot mounting enables straightforward bench or fixture attachment, while the piston diameter of 20 mm contributes to a compact actuator that nevertheless delivers effective force. These material and design choices extend service intervals and reduce the need for frequent replacements in a production setting. Compact reach with engineered leverage A 94 mm arm length offers a compact reach that suits confined workstations while maintaining enough leverage for secure clamping. The unit’s 95° closing angle provides a controlled motion profile that is easy to integrate into fixtures and jigs, reducing interference with neighbouring components. This geometry supports precise placement and repeatable orientation, important when fixtures demand exact, repeatable contact points. Integration, safety and operational benefits The clamp’s pneumatic operation simplifies automation: the actuator couples easily with compressed-air control and common valve systems, enabling timed or interlocked clamping cycles. The combination of piston Ø 20 mm and the sturdy arm creates a balance between compact size and performance, making the device a practical choice for assembly lines, welding jigs or inspection fixtures where reliable holding without manual effort is required. Choose Kukamet’s 611 pneumatic clamp for robust, repeatable bench clamping — contact Metav Werkzeuge in Emmerich for specification checks, delivery options and tailored procurement advice Technical data Article number: 611-1-Q20-D-C2 SKU: 611-1-Q20-D-C2 Brand: Kukamet Facts Arm length: 94 mm Max. holding force: 1,000 N Max. actuation force: 750 N Piston diameter: 20 mm Closing angle: 95° Special features Mounting: horizontal foot Massive holding arm Material: galvanised steel eClass: 21021004 ETIM: EC011973 FAQ What clamping force can be expected from this clamp? The Kukamet 611 pneumatic clamp provides a maximum holding force of 1,000 N, with an actuation capacity around 750 N under standard pneumatic conditions. Is the 611 suitable for mounting on a workbench or fixture? Yes, the clamp includes a horizontal-foot mounting designed for secure bench or fixture attachment and stable positioning. Which materials are used in the clamp’s construction? The clamping device is manufactured from galvanised steel and includes a massive holding arm for improved durability in workshop environments. What are the key dimensions relevant for fixture integration? Key dimensions include a 94 mm arm length, piston diameter 20 mm, and a 95° closing angle, all of which aid layout planning for jigs and stations. Can the 611 be integrated into automated sequences? The pneumatic actuation and compact piston make the 611 suitable for timed or interlocked automation using standard compressed-air valves and controls. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 20mm Pneumatic Clamp With 750N Thrust, 1000N Holding Force, Galvanised Body, Horizontal Foot - Kukamet
Take advantage of the combination of robust holding performance, consistent pneumatic actuation and galvanised durability for dependable fixture clamping; order the unit directly via Metav Werkzeuge or consult the team for application advice. Pneumatic clamp 611 by Kukamet — 1,000 N holding force, galvanised with 144 mm arm The 611 pneumatic clamp is a compact, production-ready clamping device designed for fixture and tooling applications where repeatable holding force and a sturdy support arm are required. Robust 144 mm solid holding arm Holding force 1,000 N Actuation force 750 N pneumatic cylinder Galvanised housing with horizontal foot Secure positioning for repeatable jigs and fixtures The clamp delivers a defined holding force of 1,000 N, engineered to secure workpieces reliably during machining and assembly operations. The specification for the piston and cylinder provides consistent clamping behaviour across cycles, which reduces variation in workpiece positioning and minimises rework. Where repeatability matters, the combination of a firm mechanical interface and pneumatic actuation provides both speed and control, translating into improved process stability on the shop floor. Pneumatic actuation that supports cycle consistency Equipped with a pneumatic piston that generates a maximum actuation force of 750 N and a piston diameter of 20 mm, the mechanism ensures dependable clamping strokes under compressed-air supply. Pneumatic operation offers rapid engagement and release, suitable for automated or semi-automated setups. The underlying advantage is reduced operator handling time and predictable cycle timing, allowing production planners to calculate takt times with greater confidence. Durable construction for industrial environments The unit is finished in galvanised material and fitted with a horizontal foot for secure mounting to flat surfaces, which guards against corrosion in workshop and light industrial settings. The solid holding arm design resists deformation under load, extending service life and limiting maintenance interventions. For users selecting components on the basis of ruggedness, the corrosion protection and robust arm combine to lower total cost of ownership through longer intervals between replacements. Integration and operational benefit in tooling systems With a compact arm length of 144 mm and a clamp angle of 95°, the design is readily integrated into fixtures where space is constrained yet a positive clamping action is required. The clamp is suitable for use in repetitive production tasks and can be arranged in arrays or paired with complementary locating elements. Specifying a pneumatic solution like this reduces manual handling and aligns with lean production principles that favour consistent, mechanised fastening over ad hoc methods. For reliable, high-force clamping from Kukamet, contact Metav Werkzeuge for tailored supply and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 611-1-Q20-D-C3 Type: Pneumatic clamp (611) Manufacturer: Kukamet Facts Holding force: 1,000 N Actuation (pressure) force: 750 N Piston diameter: 20 mm Arm length: 144 mm Clamp angle: 95° Special features Galvanised material Horizontal foot mounting Solid (massive) holding arm Suitable for fixture and tooling applications FAQ What maximum holding force does the clamp provide? The Kukamet pneumatic clamp 611 delivers a holding force of 1,000 N as specified for fixture security in machining and assembly. What actuation force and piston size are specified? Actuation is achieved with a pneumatic piston giving up to 750 N of force and a piston diameter of 20 mm for consistent strokes. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot configuration, making the clamp easy to fix to flat plates and fixture bases. Is the clamp protected against corrosion? The housing and arm are galvanised to provide corrosion resistance suitable for workshop and light industrial environments. Can the clamp be used in automated cycling operations? Yes, the pneumatic actuation and defined force values make the clamp suitable for automated or semi-automated production sequences. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 3,000 N Pneumatic Clamp With Horizontal Foot, Massive Holding Arm, Galvanised - Kukamet
The compact design and galvanised construction deliver long-term reliability, while the robust 200 mm arm and horizontal foot ensure consistent clamping performance under repetitive production loads. Benefit from a pneumatic actuation that provides fast, repeatable cycles and a rated holding force of up to 3,300 N — order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 611 Pneumatic Toggle Clamp — Horizontal foot, 3,300 N holding force (Kukamet) The 611 pneumatic toggle clamp is a horizontal-foot clamping solution for fixtures and assembly lines, combining a massive holding arm with pneumatic actuation for reproducible part securing Robust 200 mm arm Horizontal foot for stable mounting Clamping force up to 3,300 N Galvanised steel construction Faster, repeatable securing for production workflows The pneumatic actuation and toggle mechanism provide a consistent clamping force that reduces cycle-to-cycle variation and shortens setup time. By converting compressed-air input into a controlled clamping movement, the device delivers fast engagement and safe locking during machining or assembly. The specified 3,000 N actuation pressure rating and the maximum 3,300 N holding capacity give a clear performance envelope, enabling process planners to dimension fixtures with confidence. This reliability supports higher throughput and fewer interruptions in continuous production. Stable mounting and durable components for long service life Mounting on a horizontal foot creates a low-profile, vibration-resistant anchor point that suits conveyor-mounted jigs and bench fixtures alike. The 200 mm arm provides reach and leverage for a wide range of workpiece sizes, while the massive holding arm resists bending under load. Corrosion protection through galvanised treatment extends maintenance intervals and preserves contact geometry in industrial environments. These construction choices translate into reduced downtime and predictable maintenance planning for workshop managers. Simple integration and clear installation benefits The compact format and standard attachment arrangement make the clamp straightforward to integrate into existing jigs and tooling plates. Its toggle action locks securely at the end of the stroke, preventing unintentional release during handling or machining, which supports safer processes and consistent quality control. For automation or semi-automatic cells, the pneumatic drive enables easy connection to compressed-air systems and straightforward cycle control. Documentation and parts references support in-house servicing and spare-part management, improving overall equipment effectiveness. Contact Metav Werkzeuge in Emmerich for tailored technical advice on the Kukamet 611 pneumatic clamp and to arrange delivery or specification support: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 611-4-D-C3 Brand: Kukamet Category: Spanner eClass: 21021004 ETIM: EC011973 Facts Arm length: 200 mm Mounting: horizontal foot Angle: 95° Actuation rating: 3,000 N Holding force: 3,300 N Special features Material: galvanised steel Massive holding arm Pneumatic toggle clamp design Suitable for fixture and assembly applications FAQ What is the maximum holding force of this clamp? The Kukamet 611 pneumatic toggle clamp provides a maximum holding force of 3,300 N, suitable for demanding fixture tasks. Which mounting method does the clamp use? The unit is supplied with a horizontal foot mounting arrangement to ensure stable attachment to plates and jigs. What is the reach of the clamping arm? The clamping arm has a 200 mm length, offering extended reach for a variety of workpiece sizes. Is the clamp suitable for industrial environments? Yes — the galvanised steel construction and robust holding arm make the clamp appropriate for industrial production and assembly contexts. Can the clamp be integrated into automated cells? The pneumatic actuation is compatible with standard compressed-air systems and can be integrated into automated or semi-automatic cells for repeatable operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com