Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
Horizontalspanner 133 mit Winkelfuß
Detailed Information:Manufacturer: KukametModel: Horizontal toggle clampMaterial: VerzinktOrder your new Horizontal toggle clamp now Online!
Kombispanner 712 mit waagerechtem Fuß
Kukamet Combination toggle clamp Technical Data: and additional information:Manufacturer: KukametModel: Combination toggle clampMaterial: VerzinktOrder your new Combination toggle clamp now Online!
Kukamet 66mm Extension Lever Metal - Kukamet
Take advantage of the compact metal design and minimal weight to extend reach and improve leverage in lever-clamping setups; order the part via Metav Werkzeuge or ask the technical team for compatibility advice. Extension lever 220 — metal accessory for lever clamps (Kukamet) The Extension lever 220 is a compact metal accessory designed to extend the handle of lever clamps and support precise clamping in fixtures and jigs. Solid metal construction Compact dimensions 66 × 11 × 5 mm Lightweight at 0.025 kg Compatible with lever clamps Built for dependable clamping performance The extension is produced in robust metal, providing a stiff and wear-resistant interface that preserves clamping accuracy under repeated operation. By increasing lever length in a controlled manner, the component improves mechanical advantage and enables the same clamping force with reduced operator effort. The simple geometry minimises stress concentrations and supports a consistent contact point, which is beneficial for repeatable positioning and longer tool life. Fits into existing fixtures with minimal adjustment With compact dimensions of 66 × 11 × 5 mm and a lightweight profile of 0.025 kg, the Extension lever 220 integrates into jigs and toggle-clamp assemblies without significantly affecting balance or cycle dynamics. The small footprint allows close mounting to toggle mechanisms and reduces interference in confined workstations. If uncertainty about fitment exists, Metav’s technical advisers can review compatibility with specific clamp models and fixture layouts. Reliable sourcing and workshop-ready supply Sourcing this Kukamet accessory through Metav ensures access to a curated supply chain and consistent part quality. Metav combines a broad product range with central stock management from Emmerich, supporting stable delivery for production and maintenance needs. The combination of Kukamet engineering and Metav’s distribution helps reduce downtime and simplifies procurement for workshops and industrial buyers seeking dependable clamping components. Contact Metav Werkzeuge to request compatibility details or to source the Kukamet Extension lever 220 for reliable clamping upgrades — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 220-2-06 GTIN: 4061905074882 Brand: Kukamet Facts Dimensions: 66 × 11 × 5 mm Weight: 0.025 kg ECLASS: 21170613 Special features Material: metal Category: spanner / clamping accessory Suitable for lever clamps and toggle-clamp applications FAQ What is the primary application of this extension lever? The extension lever is intended as a handle extension for lever clamps and toggle-clamp fixtures, providing increased reach and leverage for clamping tasks with the Kukamet accessory (SKU 220-2-06). What are the exact dimensions and weight? Dimensions are 66 × 11 × 5 mm and the weight is 0.025 kg, which keeps added mass to a minimum while extending handle reach. Which material is used for the lever? The part is manufactured from metal, selected for its stiffness and wear resistance suited to repetitive clamping operations. Is the component compatible with standard lever clamps? Yes, the design is compatible with lever clamps and toggle mechanisms; Metav can confirm fitment against specific clamp models where required. Can this lever be used in compact fixtures with limited clearance? The compact footprint and low weight make it suitable for confined jigs and fixtures where space and balance are important. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
M10x70 511 Push Rod Clamp Horizontal Base, 3.5 kN Holding Force - Kukamet
Compact, zinc‑plated push‑rod clamp delivering up to 3.5 kN clamping force with a robust horizontal foot for secure fixture mounting; precise adjustment is provided by an M10×70 pressure spindle, ensuring repeatable results on production jigs and workshop fixtures. Order the Kukamet 511 through Metav Werkzeuge or consult our advisors for application guidance. Kukamet 511 Push‑rod clamp — zinc‑plated, 3.5 kN clamping force The Kukamet 511 is a durable push‑rod clamp engineered for horizontal mounting in fixturing, jigs and general workshop clamping applications, offering a compact footprint and reliable hold. Zinc‑plated steel construction Horizontal base for secure mounting M10×70 adjustable pressure spindle 3.5 kN clamping force, 3.7 kN holding force Consistent clamping performance for reliable production Engineered for repeatable operation, this clamp delivers a rated clamping force of 3,500 N and a holding force of 3,700 N, values that translate into secure workholding for machining, assembly and testing operations. Stating the forces in newtons provides a clear, comparable basis for specifying fixtures; in practice these figures mean the unit maintains position under typical cutting and assembly loads, reducing part movement and rework. The compact design supports tight layouts without compromising stability. Simple installation and precise adjustment reduce setup time Fitted with an M10×70 pressure spindle, the mechanism allows fine adjustment of contact pressure and tolerance compensation, which shortens setup and changeover times on production lines. The horizontal base enables secure bolting to fixture plates or machine beds in common orientations, and the spindle thread is compatible with standard workshop tools. This combination of adjustability and a standardised mounting interface supports modular fixturing concepts and quick repositioning. Durable finish and straightforward maintenance for long service life The unit’s zinc‑plated finish provides basic corrosion protection suitable for many workshop environments, while the overall mass and construction keep fastening loads well distributed; the clamp weighs approximately 0.96 kg, which makes it sturdy yet simple to handle during fixture assembly. The robust materials and straightforward spindle adjustment reduce the need for frequent replacement, supporting continuous operation and lower lifecycle disruption. The design is intentionally free of unnecessary features, focusing on dependable function and ease of integration. For tailored advice on integrating the Kukamet 511 into fixtures or production jigs, contact Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a specialist. Technical data Article number: 511-5 GTIN: 8680731502633 ETIM: EC011973 Eclass: 21041716 Designation: Push‑rod clamp 511 Manufacturer: Kukamet Material: Zinc‑plated Mounting type: Horizontal base Pressure spindle: M10×70 Weight: 0.96 kg Facts Clamping force max: 3,500 N Holding force max: 3,700 N Weight: 0.96 kg Special features Zinc‑plated finish Horizontal foot mounting M10×70 pressure spindle No special features FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 3,500 N; this specification for the Kukamet 511 is suitable for many light to medium workholding tasks. How is the clamp secured to a fixture plate? The unit uses a horizontal foot for bolting; the horizontal base on the Kukamet 511 allows direct fastening to fixture plates or machine beds. Can the contact pressure be adjusted? Yes, the contact pressure is adjusted via the M10×70 pressure spindle, permitting fine tuning to match part geometry and process forces. Is the finish corrosion resistant for workshop use? The zinc‑plated finish offers basic corrosion protection appropriate for general workshop environments; for aggressive conditions, additional surface treatment should be considered. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Pneumatikspanner 611 mit waagerechtem Fuß vorne
Pneumatikspanner 611 mit waagerechtem Fuß vorne
Pneumatikspanner 612 mit waagerechtem Fuß vorne
Pneumatikspanner 612 mit waagerechtem Fuß vorne
Pneumatikspanner 631 mit waagerechtem Fuß hinten
Pneumatikspanner 631 mit waagerechtem Fuß hinten
Pneumatikspanner 651 mit senkrechtem Fuß
Pneumatikspanner 651 mit senkrechtem Fuß
Pneumatikspanner 652 mit waagerechtem Fuß
Kukamet Pneumatic toggle clamp Technical Data: and Detail Information:Manufacturer: KukametModel: Pneumatic toggle clampMaterial: VerzinktPneumatic toggle clamp quick and easy order Online!!
Pneumatikspanner 681 mit waagerechtem Fuß
Detailed Information:Manufacturer: KukametModel: Pneumatic toggle clampMaterial: VerzinktPneumatic toggle clamp quick and easy order Online!!
Pneumatikspanner 682 mit waagerechtem Fuß
Pneumatikspanner 682 mit waagerechtem Fuß
Pneumatikspanner 691 mit waagerechtem Fuß
Pneumatikspanner 691 mit waagerechtem Fuß
Pneumatikspanner schwere Ausführung
Detailed Information:Manufacturer: KukametModel: Pneumatic toggle clampMaterial: Schwarz brüniertOrder now Pneumatic toggle clamp Online.
Pneumatischer Schubstangenspanner 621 mit waagerechtem Fuß hinten
Pneumatischer Schubstangenspanner 621 mit waagerechtem Fuß hinten
Pneumatischer Schubstangenspanner 641 mit waagerechtem Fuß hinten
Pneumatischer Schubstangenspanner 641 mit waagerechtem Fuß hinten
Pneumatischer Schubstangenspanner 662
Technical Overview:Manufacturer: KukametModel: Pneumatic push-pull type toggle clampMaterial: VerzinktAblesbarkeit:Mounting: waagerechter FußMaximum compressive force: 1500 N up to 1500 NDiameter piston: 12 mm up to 14 mmSetting standard:Order now Pneumatic push-pull type toggle clamp Online.
Pneumatischer Schubstangenspanner 671 mit waagerechtem Fuß
Pneumatischer Schubstangenspanner 671 mit waagerechtem Fuß
Pneumatischer Schubstangenspanner 673 mit waagerechtem Fuß
Technical Data:Manufacturer: KukametModel: Pneumatic push-pull type toggle clampMaterial: Verzinkt mit GusskörperAblesbarkeit:Mounting: waagerechter FußMaximum compressive force: 1500 N - 1500 NDiameter piston: 12 mm - 14 mmSetting standard:Order now Pneumatic push-pull type toggle clamp Online.
Querarm Nr.6895 Gr.3 z.Schnellspanner AMF
für Schnellspanner · verzinkt und passiviert · komplett mit zwei vergüteten Andrückschrauben Nr. 6890 und einer Befestigungsschraube · Anwendung: Mit dem Querarm können entweder ein großes Werkstück an zwei Punkten oder zwei kleinere Werkstücke gleichzeitig gespannt werden. Weitere technische Eigenschaften: · Schraubenabstand: 34-100mm · Gesamtlänge: 120mm
Schnellspanner 811 mit waagerechtem Fuß
Schnellspanner 811 mit waagerechtem Fuß
Schnellspanner Schraubzwingenart 831
Technical Data and Overview for Kukamet Squeezing type toggle clamp :Manufacturer: KukametModel: Squeezing type toggle clampMaterial: VerzinktSqueezing type toggle clamp quick and easy order Online!!
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com