Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
95° 3000 N Pneumatic Clamp With Horizontal Base, Massive Holding Arm, Galvanised - Kukamet
Benefit from dependable fixture clamping with a massive holding arm and a compact 100 mm reach that maintain steady production throughput; the combination of high holding force and a galvanised finish ensures long service life with low maintenance. Order the unit directly via Metav Werkzeuge or consult the experts for application advice. 611 Pneumatic Clamp — 100 mm arm, 3,300 N holding force (Kukamet) A 611 pneumatic clamp engineered for secure, repeatable clamping in industrial jigs and fixtures, suitable for horizontal mounting and heavy-duty production environments Massive holding arm for stable clamping Horizontal foot for secure mounting 100 mm reach arm Up to 3,300 N holding force Consistent clamping for uninterrupted production The pneumatic clamping unit delivers reliable, repeatable force that supports continuous operation on assembly lines and fixture tables. With a holding force of 3,300 N and an actuating force rated at 3,000 N, the device reduces fixture slippage and minimises rework. The high holding capacity translates directly into improved process stability: fewer interruptions, reduced inspection time and a steady output rate. The mechanical design focuses on efficiency and predictable performance, making it suitable where firm clamping is essential to maintain machining or assembly tolerances. Space-saving mounting that simplifies integration Designed with a horizontal foot for secure attachment, the clamp occupies minimal vertical space while offering a 100 mm reach that covers typical workpiece dimensions without requiring extra hardware. The compact footprint allows straightforward installation into existing jigs, saving setup time and preserving access to surrounding components. The horizontal mounting option supports fast retrofitting in constrained environments and helps to keep tooling layouts compact, which benefits workflow ergonomics and cell design. Durable construction for low life-cycle costs Constructed from galvanised materials and featuring a massive holding arm, the unit resists corrosion and mechanical wear in demanding workshop conditions. Robust materials and a rugged design reduce the need for frequent replacement, lowering total cost of ownership. Because maintenance intervals are extended and component wear is minimised, the clamping unit contributes to predictable maintenance planning and fewer unplanned stoppages—an economic advantage in high-throughput settings. Application-focused performance and safety The clamp’s geometry, including a 95° actuation angle, supports secure engagement in a range of fixture arrangements while the substantial arm provides stable contact under load. The combination of proven actuation mechanics and a sturdy hold makes this device appropriate for machining, joining and assembly tasks where precise locating and force retention are required. Technical simplicity of the mechanism also facilitates faster cycle times and easier integration with pneumatic control systems. For tailored selection and delivery from our Emmerich site, contact Metav Werkzeuge to discuss how the Kukamet 611 can be integrated into existing fixtures and production lines Technical data SKU: 611-4-D-C1 Model: 611 eClass: 21021004 ETIM: EC011973 Data Actuating force: 3,000 N Holding force: 3,300 N Arm length: 100 mm Angle: 95° Special features Material: galvanised Mounting: horizontal foot Massive holding arm Category: Spanner FAQ What maximum holding force does the clamp provide? The clamp delivers a holding force of 3,300 N, suitable for demanding clamping applications where strong retention is required. How is the unit mounted in a fixture? Mounting is via a horizontal foot, allowing secure attachment to fixture plates or tooling bases in a compact arrangement. Which materials is the clamp suited to within a production environment? The galvanised construction and robust arm make the clamp well suited for typical workshop materials and industrial conditions, providing corrosion resistance and mechanical durability. What is the arm reach and how does that affect fixture layout? The arm reach is 100 mm, offering a balance between compact installation and sufficient engagement distance for common workpieces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 4500 N Pneumatic Clamp Horizontal Base, Massive Holding Arm, Galvanised - Kukamet
Benefit from a robust combination of a 130 mm holding arm, galvanised construction and up to 5,000 N holding force for reliable production clamping; order the Pneumatic clamp 631 directly via Metav Werkzeuge or request advice from the consultants if further specification is required. Pneumatic clamp 631 — horizontal mounting foot, 130 mm arm by Kukamet A Pneumatic clamp 631 designed for secure workholding in jigs and fixtures, featuring a horizontal mounting foot and a solid, 130 mm holding arm for stable clamping in industrial environments Massive holding arm, 130 mm reach Horizontal mounting foot for stable fixing Galvanised construction resists corrosion Up to 5,000 N holding force Consistent clamping power that improves cycle reliability The pneumatic unit delivers clearly defined clamping force and holding force, with a maximum clamping force of 4,500 N and a maximum holding force of 5,000 N. These values describe different aspects of performance: the clamping value refers to the force applied when the actuator closes, while the holding value indicates the static resistance against displacement once the workpiece is secured. This distinction supports predictable part retention and reduces rework in series production. The compact actuation principle ensures repeatable cycles and short switching times, which benefits throughput in assembly and machining operations. Built for durability in workshop conditions A galvanised finish protects the mechanism against corrosion in demanding shop-floor environments, extending service life and reducing refurbishment intervals. The massive holding arm increases rigidity at the clamping point, which improves positional stability during machining or inspection. The unit is supplied with a horizontal mounting foot, allowing simple installation directly to plates or fixture bases, while the 95° arm geometry gives a favourable clamping orientation for many jig designs. These construction choices combine to lower downtime and support continuous operation in production or repair shops. Straightforward integration into jigs and fixtures Pneumatic actuation enables fast, repeatable engagement without complex drive electronics, making the clamp suitable for manual stations and automated tooling alike. The 130 mm arm reach allows access behind fixturing elements and offers flexibility when locating components on pallets or clamps. Mechanical simplicity supports easy retrofitting into existing systems and simplifies maintenance procedures. The robust design and standardised mounting mean the unit can be specified as a modular element within fixture stacks or dedicated production jigs. Proven supply chain and application support Sourcing this clamping solution via an established specialist reduces procurement risk and shortens lead times. The product is distributed through a European quality filter that combines a broad portfolio with practical logistics; this helps maintain a consistent supply of consumables and spare parts across projects. Technical documentation accompanying the product supports correct selection for specific fixture concepts and contributes to overall process reliability. Arrange a specification consultation with Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 — request the Kukamet Pneumatic clamp 631 (SKU 631-5-D-C1) to confirm suitability for the intended fixture design Technical data Article number: 631-5-D-C1 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Numbers / Core technical data Clamping force max: 4,500 N Holding force max: 5,000 N Arm length: 130 mm Angle: 95° Special features / Versions Material: Galvanised Mounting: Horizontal foot Massive holding arm Category: Clamps FAQ What is the difference between clamping force and holding force for this clamp? The clamping force (4,500 N) refers to the actuator’s closing power, while the holding force (5,000 N) indicates the static resistance against movement once the part is secured by the Kukamet Pneumatic clamp 631. Which mounting method is provided for fixture attachment? The unit is supplied with a horizontal mounting foot, enabling direct attachment to plates or fixture bases for stable installation. Is the reach sufficient for use in palletised jigs? With a 130 mm arm reach and a rigid holding arm, the clamp is suitable for many pallet and fixture concepts where access behind locating elements is required. What drive principle does the clamp use and what are the benefits? Pneumatic actuation provides quick, repeatable engagement without complex electronics, which supports high cycle rates and straightforward integration. Which SKU should be specified for ordering? Specify SKU 631-5-D-C1 for the Kukamet Pneumatic clamp 631 when ordering or requesting a quotation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 4500N Pneumatic Clamp With 230mm Horizontal Arm, Massive Holding Arm, Zinc-Plated - Kukamet
The combination of a massive 230 mm holding arm, a galvanised finish and a 5,000 N maximum holding force makes this pneumatic clamp a dependable choice for heavy-duty jigs and fixtures; benefit from secure, repeatable clamping and straightforward integration into production rigs. Order the unit directly via Metav Werkzeuge or consult the team for specification support. 611 Pneumatic Clamp by Kukamet — 5,000 N holding force, 230 mm arm 611 Pneumatic Clamp — a heavy-duty pneumatic clamping solution for horizontal-foot mounting, engineered for secure workholding in machining, assembly and welding fixtures Pneumatic actuation for fast clamping 5,000 N maximum holding force Massive 230 mm holding arm Galvanised corrosion-resistant finish Secure fixation that reduces rework and cycle variation The clamp delivers 5,000 N maximum holding capability and a 4,500 N maximum pressing force, providing a high safety margin for demanding operations. Built for repeatability, the mechanism ensures the workpiece remains stable during cutting, welding or assembly, which reduces rework and improves first-pass yield. The specification of holding and pressing forces is intended to support straightforward load calculations for fixture design. Robust construction for long service life in workshop conditions Constructed from galvanised steel and equipped with a massive holding arm, the device is corrosion-resistant and suited to workshop environments where durability matters. The 230 mm arm length gives good reach across a variety of jigs while the robust arm design limits vibration and deflection under load. With a clamping angle of 95°, the geometry is optimised for many fixture layouts and for reliable engagement in repetitive cycles. Rapid, consistent pneumatic operation for higher throughput Pneumatic actuation offers fast clamp and release cycles, allowing smoother integration into automated or semi-automated production lines. The horizontal-foot mounting supports direct attachment to fixture plates or baseplates, simplifying alignment and reducing setup time. Consistent actuation leads to uniform clamping pressure across batches, supporting quality control and process stability without complex adjustments. Practical uses and straightforward integration into fixtures Ideal for use in machining, welding bays and assembly stations, the unit suits metalworking and fabrication where robust clamping is required. The horizontal foot simplifies mounting on platework and modular fixturing systems, and the clamp’s specifications are suitable for designing location and clamping sequences in production planning. Technical documentation and catalogue references are available to support engineering validation and integration. For project-specific advice on fitting the Kukamet 611 pneumatic clamp into fixtures and production lines, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data SKU: 611-5-D-C3 GTIN: 8680731506778 Model designation: 611 Facts Arm length: 230 mm Maximum holding force: 5,000 N Maximum pressing force: 4,500 N Clamping angle: 95° eClass: 21021004 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm Pneumatic actuation Catalogue: 611-612-631-651-652-katalogseite.pdf FAQ What is the maximum holding force of this clamp? The Kukamet 611 pneumatic clamp provides a maximum holding force of 5,000 N, suitable for heavy-duty fixturing tasks. Which mounting method is used for the clamp? The device is supplied for horizontal foot mounting, enabling direct attachment to fixture plates and baseplates. What material and surface protection does the clamp have? The clamp is made from galvanised steel, offering corrosion resistance appropriate for workshop environments. What is the outreach of the clamp’s holding arm? The holding arm has a reach of 230 mm, providing extended engagement for larger workpieces and versatile fixture layouts. Is the clamp suitable for integration into automated lines? Yes. The pneumatic actuation of the 611 supports rapid, repeatable cycles and straightforward integration into automated or semi-automated production systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 62mm Pneumatic Clamp Horizontal Foot, Massive Holding Arm, 1,200N Push / 1,400N Hold, Zinc-Plated - Kukamet
Take advantage of robust, galvanised construction and a 1,200 N clamping capability for dependable production cycles; combine secure holding and straightforward mounting for streamlined fixturing. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Pneumatic clamp 631 by Kukamet — galvanised, horizontal-foot design with 62 mm arm Pneumatic clamp 631 delivers pneumatic actuation for repeatable clamping in workshop and light industrial fixturing, combining a solid holding arm with a compact horizontal-foot mount for secure placement. Galvanised construction for corrosion resistance 62 mm massive holding arm for stable clamping 1,200 N maximum clamping force Horizontal foot mounting, 95° opening Reliable clamping performance that keeps production moving The pneumatic clamp is engineered to provide consistent, repeatable clamping through its pneumatic actuation and robust mechanics. With a rated max clamping force of 1,200 N and a holding force of 1,400 N, the device secures components during machining or assembly, reducing rework and downtime. The performance characteristics make it suitable for jigs and fixtures where stability under load is essential; the measurable force ratings offer a clear basis for fixture planning and process validation. Easy integration and durable build for workshop environments Installation is simplified by the horizontal foot mounting, which allows the clamp to be fixed close to the workpiece for compact fixture layouts. The galvanised construction protects the mechanism from corrosion in everyday workshop conditions, while the 62 mm massive holding arm gives a stable contact surface that resists flex under load. The 95° opening angle improves accessibility during part loading and unloading, so cycle times stay short without compromising safety or repeatability. Practical choice backed by a trusted supply partner Specified as a compact pneumatic clamping solution, this model suits production cells, assembly benches and inspection fixtures where a reliable mechanical hold is required. The combination of durable materials and quantifiable force ratings supports predictable process outcomes and easier specification in engineering documentation. For customers seeking vendor reliability and a broad product range, Metav Werkzeuge provides continental warehousing and technical filtering to ensure consistent quality and supply. For tailored technical advice or a project-specific quotation on the Kukamet Pneumatic clamp 631, contact Metav Werkzeuge in Emmerich for direct support and reliable delivery. Technical data SKU: 631-2-D-C1 Model: 631 Brand: Kukamet Core data Max clamping force: 1,200 N Max holding force: 1,400 N Arm length: 62 mm Opening angle: 95° Special features Galvanised construction Horizontal foot mounting Massive holding arm Classification: eClass 21021004, ETIM EC011973 FAQ What clamping and holding forces does the clamp provide? The Kukamet pneumatic clamp 631 (SKU 631-2-D-C1) has a maximum clamping force of 1,200 N and a maximum holding force of 1,400 N. How is the clamp fixed to a fixture? The unit is designed for horizontal foot mounting, enabling a compact attachment close to the workpiece. What benefits does the galvanised construction deliver? Galvanised construction increases corrosion resistance and extends service life in standard workshop environments for the Kukamet clamp 631. What is the effective arm length and opening capability? The clamp features a 62 mm robust holding arm and a 95° opening angle for improved part accessibility. Is the clamp suited to repetitive industrial cycles? Yes, the pneumatic actuation and solid mechanics of the Kukamet model 631 are intended for repeatable, high-frequency fixturing operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 62mm Pneumatic Clamp With Horizontal Foot, 1,200 N Closing / 1,400 N Holding, Galvanised Body - Kukamet
Robust galvanised construction, a 62 mm massive holding arm and up to 1,400 N holding force provide reliable, repeatable clamping for production fixtures—order the Pneumatic clamp 611 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 611 by Kukamet — horizontal foot, 1,400 N holding force Pneumatic clamp 611 is a compact pneumatic clamping solution designed for repeatable workpiece retention in jigs, fixtures and automated production stations, featuring a horizontal foot for stable mounting. Robust galvanised construction Horizontal foot for stable mounting 62 mm solid holding arm Holding force 1,400 N; clamping 1,200 N Secure clamping through engineered strength The 611 is built with a galvanised body and a massive holding arm, giving mechanical stability where consistent force and repeatability matter. A specified holding force of 1,400 N combined with a clamping force of 1,200 N ensures that components remain fixed during machining, assembly or inspection tasks. These numerical values allow planners to calculate fixture loads and safety margins precisely, reducing rework and downtime. The solid arm geometry also minimises deflection under load, which supports tighter process tolerances. Stable installation and fast pneumatic operation Designed with a horizontal foot, this clamp mounts flush to base plates and fixture frames for a low-profile, secure installation. The device operates by pneumatic actuation, offering short cycle times and straightforward integration with compressed-air control circuits. With an actuation angle of 95°, the mechanism produces a clear mechanical advantage for generating the rated forces while maintaining compact stroke travel. The combination of predictable motion and pneumatic speed makes the clamp well suited to semi-automated or fully automated production lines. Durable finish and workshop suitability The galvanised finish protects the clamp against corrosion in workshop environments and keeps maintenance demands low. Materials and surface treatment are chosen for long service life in industrial use, supporting continuous operation with minimal intervention. Supplied by an established partner network, the product benefits from consistent quality checks and spare-part availability, which helps sustain production uptime over the long term. Choose the Kukamet 611 for dependable pneumatic clamping in production—contact Metav Werkzeuge for application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 611-2-D-C1 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Category: Spanner Facts Clamping force max: 1,200 N Holding force max: 1,400 N Arm length: 62 mm Angle: 95° Materials and features Galvanised finish Massive holding arm Horizontal foot mounting Pneumatic actuation FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 1,400 N as specified for the Kukamet Pneumatic clamp 611 (SKU 611-2-D-C1). Is the clamp suitable for automated production lines? Yes. The model uses pneumatic actuation and a compact stroke profile, which supports short cycle times and integration into automated fixtures. How is the clamp mounted to a fixture? The clamp is mounted using its horizontal foot, which allows secure attachment to base plates and fixture frames for stable operation. What protection does the surface treatment provide? A galvanised finish reduces corrosion risk and lowers maintenance requirements, making the clamp suitable for workshop and industrial environments. Can the clamp handle heavy or vibrating operations? The combination of a massive holding arm and rated holding force of 1,400 N makes this clamp appropriate for many demanding tasks; assess application-specific loads when designing fixtures Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 67mm Pneumatic Clamp Horizontal Base Massive Holding Arm 2,000N Pressing Force, 2,500N Holding Force - Kukamet
Take advantage of the combination of a robust galvanised body, a massive holding arm and reliable pneumatic actuation to secure faster cycle times and consistent clamping force. Order the clamp via Metav Werkzeuge or consult the Metav team for specification support. Pneumatic Clamp 611 by Kukamet — 2,500 N holding force, 67 mm arm A Pneumatic Clamp 611 designed for horizontal-foot mounting, delivering heavy-duty clamping in production fixtures and assembly stations Robust galvanised construction Max holding force 2,500 N 95° locking angle for secure clamping Horizontal-foot mounting for stable fixing Built for repeatable, heavy-duty clamping The unit is engineered to deliver a consistent holding force of 2,500 N, with a maximum applied pressure force of 2,000 N, ensuring reliable fixation of workpieces under load. The clamp’s 67 mm arm length combines reach with stability, while the massive holding arm reduces bending and wear during repetitive cycles. Constructed from galvanised steel, the clamping device resists corrosion in workshop environments, so fixture integrity is maintained over long production runs. Where process repeatability matters, this clamping solution provides standardised performance that can be defined in fixture documentation and incorporated into automated cells. Faster setup and safer operation for production workflows Pneumatic actuation allows the clamping action to be completed quickly and without manual force, reducing cycle time and operator strain. The mechanism locks at a 95° angle, which enhances positional security and prevents unintentional release during machining or handling. The horizontal foot mounting method guarantees a low-profile, rigid attachment to fixture plates, enabling a compact layout and straightforward integration into jigs. Because the unit was conceived for industrial handling, fixture designers benefit from a compact footprint and repeatable actuation that supports throughput improvements and stable quality control. Long service life and versatile application scope The clamping unit’s galvanised finish and solid construction are tailored for continuous use in workshops and light industrial environments. The substantial arm and durable mechanism are suitable for repetitive clamping tasks in assembly, welding and general fixturing where secure holding is essential. The pneumatic design simplifies linkage to existing compressed-air systems and permits controlled actuation sequences when combined with valves or PLC control. The model 611 fits as a standardised component in a modular tooling strategy, offering longevity and predictable maintenance intervals to support operational continuity. Contact Metav Werkzeuge for specification assistance and secure supply of the Kukamet 611 pneumatic clamp — technical advice and reliable delivery from Emmerich are available. Technical data SKU: 611-3-D-C1 GTIN: 8680731504880 Model: 611 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Core data Arm length: 67 mm Locking angle: 95° Max pressure force: 2,000 N Max holding force: 2,500 N Mounting: horizontal foot Design & features Material: galvanised steel Actuation: pneumatic Massive holding arm Horizontal-foot mounting Robust construction for repetitive use FAQ What clamping force can be expected from this unit? The Kukamet Pneumatic Clamp 611 provides a maximum holding force of 2,500 N and a maximum applied pressure force of 2,000 N as stated in the technical data. Is the clamp suitable for integration into automated fixtures? Yes. The pneumatic actuation and horizontal-foot mounting make the unit suitable for integration into automated and semi-automated fixtures in production environments. What materials is the clamp made from and how is it protected against corrosion? The body is made from galvanised steel, providing corrosion resistance appropriate for workshop conditions and preventing premature surface degradation. Can the clamp be mounted on a flat fixture plate? Yes. The clamp is designed for a horizontal-foot mount, enabling secure attachment to flat fixture plates and stable performance during machining or assembly. How does the 95° locking angle benefit safety and process stability? The 95° locking angle improves positional security, reducing the risk of accidental release during machining or handling and contributing to safer, more stable processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 750N Pneumatic Clamp Horizontal Base Massive Holding Arm Zinc-Plated, 1000N Retention - Kukamet
Take advantage of precise, repeatable clamping with a robust galvanised construction and a compact 94 mm arm that suits confined fixtures; the combination of reliable pneumatic actuation and a 1,000 N maximum holding force supports steady production flow. Order the Pneumatic clamp directly via Metav Werkzeuge or ask the consultants for tailored fixture recommendations. Pneumatic clamp 631 — Galvanised, 1,000 N holding force by Kukamet A Pneumatic clamp 631 for automated workholding in jigs and fixtures, designed with a horizontal foot and a compact 95° actuation angle for secure, space-saving installation Galvanised steel body for corrosion resistance Pneumatic actuation with 750 N operating force Up to 1,000 N maximum holding force Horizontal-foot mount for stable fastening Consistent clamping performance for efficient production The clamp delivers pneumatic actuation with a rated actuation force of 750 N, producing a maximum holding force of 1,000 N. In practice, this difference between operating and holding force means a short, powerful clamp stroke that secures workpieces reliably while maintaining a safety margin against dynamic loads. Repeatability of pneumatic actuation reduces setup variation and shortens cycle times on assembly lines and machining fixtures. A 94 mm clamping arm provides practical reach in compact jigs without requiring additional counter‑bracing, supporting steady throughput and fewer stoppages for readjustment. Built for durability and low maintenance The body is finished in a galvanised finish, which protects bare metal from corrosion in humid or coolant‑exposed environments, extending service life and reducing maintenance frequency. A massive holding arm provides rigidity where it matters, limiting elastic deformation under load and keeping clamped parts immobile during machining. The robust construction translates into predictable clamping behaviour and fewer rejects caused by movement, cutting down rework and saving labour time over long production runs. Space-conscious mounting and fixture integration Designed with a horizontal foot for secure attachment, the clamp integrates cleanly into modular fixtures, pallets and machine tables. The 95° actuation angle offers compact kinematics that keep the tool path clear while enabling topside access for loading and unloading. Installation requires a regulated compressed-air supply and straightforward mounting; pneumatic piping and valve selection determine cycle speed and synchronisation with other clamping elements, allowing easy integration into automated sequences without complex redesign. Practical benefits for workshop and production planners As a lever-clamping solution, the item offers predictable clamping cycles with minimal operator handling, improving ergonomics and process safety. The galvanised surface and heavy-duty arm reduce lifecycle cost through longevity rather than component turnover. For industrial users seeking dependable repeatability in medium-duty fixtures, this clamp supports high uptime and consistent product quality while simplifying fixture design and maintenance planning. Contact Metav Werkzeuge for personalised fixture advice and procurement of the Kukamet Pneumatic clamp 631 — technical consultants available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss integration and delivery from Emmerich Technical data SKU: 631-1-D-C2 Model: 631 Type: Pneumatic clamp Manufacturer: Kukamet Category: Spanner Facts Arm length: 94 mm Operating force (max): 750 N Holding force (max): 1,000 N Actuation angle: 95° Finish: Galvanised Special features Massive holding arm Horizontal-foot mounting Pneumatic actuation Designed for lever-clamping applications FAQ What is the maximum holding force of this clamp? The Kukamet Pneumatic clamp 631 (SKU 631-1-D-C2) provides a maximum holding force of 1,000 N. Which actuation force should be expected during operation? Rated actuation force for the clamp is 750 N, which refers to the pneumatic drive force during the clamping stroke. What surface protection does the clamp have? The clamp is supplied with a galvanised finish to improve corrosion resistance in workshop environments. How is the clamp mounted in a fixture? Mounting is by a horizontal foot, allowing secure fastening to jigs, pallets or machine tables with standard fasteners. Is the 94 mm arm suitable for confined assemblies? A 94 mm arm length provides compact reach for confined fixtures while maintaining sufficient clearance for common loading operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° 750N Pneumatic Clamp With 1,000N Holding Force, Horizontal Base, Zinc Plated, Massive Holding Arm - Kukamet
Compact, galvanised clamping unit with a 114 mm arm, 750 N pressing capacity and up to 1,000 N holding force — engineered for dependable, short-cycle workholding. Order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 631 — galvanised, horizontal‑foot mounting (Kukamet) A Pneumatic clamp 631 intended for secure fixture clamping in production and assembly environments, offering fast pneumatic actuation and robust retention. Galvanised body for corrosion resistance Robust 114 mm arm for stable clamping 1,000 N maximum holding force Horizontal-foot mounting for base fixation Consistent clamping performance for repetitive processes The compact clamping unit delivers defined actuation and repeatable retention thanks to its pneumatic operation and calculated force ratings. A specified 750 N pressing force achieves reliable contact during the clamping stroke while the separate 1,000 N holding capacity secures the workpiece under load. The 114 mm arm gives a stable lever length for fixtures where clearance and reach matter, and the approximately 95° operating angle provides a clear clamping travel that can be accommodated in compact jigs. Such measured values support predictable cycle times and reduce rework through improved positional stability. Robust construction to reduce maintenance intervals Constructed in galvanised steel and equipped with a massive holding arm, this clamping device resists corrosion and wear in workshop conditions. The surface treatment contributes to long service life in environments with regular handling and coolant exposure, while the heavy-duty arm resists deformation under repeated load. The horizontal‑foot mounting simplifies secure base attachment and distributes forces into the fixture plate, decreasing the likelihood of loosening during operation. Together, these design choices reduce downtime and the frequency of component replacement, supporting continuous production workflows. Integration and typical applications in fixtures and jigs The clamp is suited to assembly, machining fixtures and small-series production where pneumatic actuation accelerates cycle throughput. Its horizontal-foot configuration allows installation on horizontal fixture plates or subplates; the lever-style operation integrates well with guided slide systems and modular clamping rails. The unit’s geometry and force values make it suitable for: light to medium-duty holding, repeatable positioning in short-cycle milling and drilling operations, and automated assembly stations where reliable retraction and engagement are required. When specifying the device for a fixture, consider the listed forces and arm length to match holding requirements and prevent overloading adjacent components. Contact Metav Werkzeuge for a detailed specification sheet, application advice and supply from the Emmerich quality hub. Technical data SKU: 631-1-D-C3 Model: 631 Manufacturer: Kukamet Facts Arm length: 114 mm Operating angle: 95° Maximum pressing force: 750 N Maximum holding force: 1,000 N Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm Pneumatic actuation FAQ What clamping and holding forces does this unit provide? The Kukamet pneumatic clamp 631 offers a pressing force of 750 N and a maximum holding force of 1,000 N as specified for consistent workpiece retention. How is the clamp mounted to a fixture? Mounting is achieved via a horizontal foot; the design suits attachment to horizontal fixture plates or subplates for stable base fixation. Is the construction suitable for humid or coolant‑exposed environments? Yes, the galvanised finish enhances corrosion resistance, supporting use in workshops where moisture or emulsions are present. What is the effective arm length and how does that affect fixture design? The arm measures 114 mm, providing reach for many small fixtures; selection should consider lever length to ensure required clamping travel and clearance. Can the clamp be used in automated short‑cycle applications? The pneumatic actuation and defined operating angle make the unit appropriate for short‑cycle automated fixtures where repeatable engagement and fast retraction are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 1,200 N Clamping Force, 1,400 N Holding Force, Galvanised Heavy-Duty Arm - Kukamet
Take advantage of a robust heavy-duty arm and a high holding capability to ensure stable workholding in repetitive operations; the galvanised finish offers corrosion resistance for workshop environments. Order the Pneumatic Clamp 612 directly via Metav Werkzeuge or consult our specialists for application advice. Pneumatic Clamp 612 — horizontal-foot pneumatic clamp with 1,400 N holding force (Kukamet) The Pneumatic Clamp 612 is a compact industrial clamp designed for secure fixture and repetitive workholding in machining, assembly and general workshop applications. Robust heavy-duty holding arm Horizontal foot for secure mounting 112 mm reach for versatile clamping Galvanised steel for corrosion resistance Consistent, measurable clamping power for reliable production The clamp delivers a 1,400 N holding force combined with a 1,200 N actuation force, providing measurable and repeatable retention for fixtures and jigs. These figures translate into dependable holding performance under pneumatic actuation, reducing the need for manual rework and improving cycle-time predictability. The performance metrics support rational decision‑making for production planners aiming to standardise on dependable workholding components. Simple integration and flexible mounting for diverse setups Equipped with a horizontal foot mounting, a 112 mm reach and a 95° closing angle, this clamp integrates into existing workstations and fixture plates with minimal adaptation. The horizontal base allows low-profile installation where vertical clearance is limited, while the arm reach offers accessibility to a broad range of workpiece geometries. Such mechanical options make this clamp suitable for assembly lines, CNC fixtures and repetitive manual operations where consistent positioning is required. Built for durability and straightforward upkeep in busy workshops Constructed with a galvanised steel finish and a massive holding arm, the unit resists corrosion and mechanical wear typical in industrial environments. The robust construction reduces maintenance intervals and contributes to long service life, supporting continuous production. For those seeking dependable workholding from a single component, this clamp offers straightforward handling and low lifecycle overhead when used in standard pneumatic systems. For reliable supply and specification support for the Kukamet Pneumatic Clamp 612, contact Metav Werkzeuge in Emmerich for tailored recommendations and secure delivery to the workshop. Technical Data SKU: 612-2-D-C2 Model: 612 Brand: Kukamet Facts Arm reach: 112 mm Maximum actuation force: 1,200 N Maximum holding force: 1,400 N Closing angle: 95° Material: galvanised steel ECLASS: 21021004 ETIM: EC011973 Special features Horizontal foot mounting Massive holding arm Galvanised finish Catalogue page available (PDF) FAQ What clamping forces does the clamp provide? The Kukamet Pneumatic Clamp 612 offers a maximum holding force of 1,400 N and a maximum actuation force of 1,200 N, enabling stable retention in repetitive processes. Is the clamp suitable for use in humid or workshop environments? Yes, the Pneumatic Clamp 612 is finished in galvanised steel, which gives enhanced resistance to corrosion common in workshop and industrial settings. How is the clamp mounted to a fixture plate? The unit uses a horizontal foot mounting that allows secure bolting to plates or bases, offering a low-profile installation for confined spaces. Can the clamp be used on CNC fixtures and assembly jigs? The combination of a 112 mm reach and a 95° closing angle makes this clamp suitable for a wide range of fixtures, including CNC setups and repetitive assembly applications. Where can detailed technical documentation be obtained? Technical documentation and the catalogue page for the Kukamet Pneumatic Clamp 612 are provided with the product listing; Metav Werkzeuge can supply additional datasheets on request. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 1200 N Push Force, 1400 N Hold Force, Zinc Coated Massive Arm, Horizontal Foot - Kukamet
Take advantage of a galvanised, heavy‑duty pneumatic clamp that delivers consistent clamping at a 95° angle and up to 1,400 N holding force; the robust horizontal‑foot mounting and 112 mm holding arm ensure secure fixturing and long service life. Order the unit directly via Metav Werkzeuge or consult Metav’s specialists for integration advice. Pneumatic Clamp 611 – heavy‑duty pneumatic clamping unit by Kukamet, galvanised, 1,400 N holding force The Pneumatic Clamp 611 is a pneumatic clamping unit designed for fixture and jig applications in production and assembly environments, featuring a horizontal‑foot mounting and a robust holding arm for repeatable, secure clamping. Robust galvanised construction 1,400 N maximum holding force 112 mm heavy-duty holding arm Horizontal-foot mounting, 95° clamping angle Dependable force and repeatability for productive workflows With a rated maximum holding force of 1,400 N and pneumatic actuation, the clamp provides reliable, repeatable fixturing that reduces rework and speeds up setup times. The pneumatic drive translates control signals into consistent clamping strokes, so cycle consistency is improved and process variability is reduced. This makes the device particularly suitable for medium‑ to high‑volume assembly where stable clamping pressure and fast actuation contribute directly to throughput. The combination of consistent force and a defined 95° clamping angle simplifies fixture design and ensures predictable part orientation during machining or assembly. Built to resist workshop conditions and lower maintenance burden The housing and arm are galvanised, providing corrosion resistance in humid or exposed workshop environments; the massive holding arm construction and 112 mm reach deliver mechanical stiffness that keeps parts firmly located under load. Horizontal‑foot mounting offers straightforward attachment to standard fixture plates, and the solid arm profile minimises flex during clamping. These design choices reduce the need for frequent adjustments and extend intervals between service, contributing to lower life‑cycle intervention and decreased downtime. Easy integration into existing jig and fixture systems The pneumatic design of the clamping unit allows direct integration with common compressed‑air control systems and valve banks, making it compatible with automated or semi‑automated production lines. The horizontal foot layout suits bench fixtures and tooling plates where lateral access is required; the compact arm length supports both small components and larger assemblies with a predictable clamping stroke. Clear specification of holding and actuation forces enables engineering teams to size valves and regulators correctly, supporting safe, efficient implementation on assembly lines or inspection rigs. Contact Metav Werkzeuge today for technical guidance and to arrange delivery of the Pneumatic Clamp 611 from Emmerich — Metav’s consultants can advise on fixture integration and supply options Technical data Article number: 611-2-D-C2 Name: Pneumatic Clamp 611 Manufacturer: Kukamet GTIN: 8682843523537 eClass: 21021004 ETIM: EC011973 Core measurements Arm length: 112 mm Maximum holding force: 1,400 N Maximum actuation force: 1,200 N Clamping angle: 95° Materials & special features Material: galvanised Mounting: horizontal foot Massive holding arm Pneumatic actuation Heavy‑duty construction FAQ What materials can the clamp be used with? The Pneumatic Clamp 611 from Kukamet is a general‑purpose clamping unit; material compatibility depends on fixture design rather than the clamp itself, and the 1,400 N holding force suits a wide range of metals and components when used with appropriate workpiece supports. How is the clamp mounted to a fixture plate? Mounting uses the horizontal‑foot interface; the 611 is designed for secure attachment to standard tooling plates and can be integrated into jigs where lateral access and a 95° clamping action are required. Is the clamping force adjustable? Clamping force is controlled via the pneumatic supply and valve settings; the Pneumatic Clamp 611 delivers up to 1,400 N holding force when supplied and regulated according to application requirements. Can the clamp operate in humid or corrosive shop environments? Yes, the galvanised finish and heavy‑duty arm improve resistance to corrosion and workshop wear, making the unit suitable for typical industrial conditions when maintained according to standard practice. Which SKU should be ordered for this model? Order reference: SKU 611-2-D-C2 for the Pneumatic Clamp 611 by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 2,000 N Clamp Force, 2,500 N Holding Force, Zinc Plated Heavy-Duty Arm - Kukamet
Take advantage of the combination of fast, repeatable clamping and robust construction for uninterrupted production cycles; the galvanised finish and solid holding arm ensure long service life while the high clamping forces secure workpieces reliably. Order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 612 by Kukamet — Galvanised, 2,500 N holding force The Pneumatic clamp 612 is a horizontal-foot pneumatic lever clamp with a rigid 167 mm arm, designed for secure workholding in production and assembly environments Galvanised steel construction Robust 167 mm holding arm Holding force up to 2,500 N Horizontal-foot mounting Reliable clamping performance for continuous production The clamp delivers a holding force of 2,500 N and an actuation force rated at 2,000 N, providing consistent retention for repetitive tasks and medium-duty fixtures. These figures describe the mechanical capacity: holding force denotes the maximum static force the device resists before slip, while actuation force refers to the pneumatic input that moves the lever. The clear performance envelope supports process planning and contributes to predictable cycle times in industrial assembly and machining jigs. Durable materials and low-maintenance design Constructed in galvanised steel with a massive holding arm, the unit is engineered to withstand workshop wear and occasional exposure to moisture without rapid corrosion. The heavy-duty arm and reinforced pivot points reduce flex under load, which preserves clamp alignment and minimises adjustment frequency. This robustness translates into fewer interruptions for repair and a lower total cost of ownership over the service life. Compact mounting and reliable positioning Designed for horizontal-foot mounting, the clamp occupies a modest footprint while offering a 95° clamping angle for positive engagement and quick part release. The 167 mm arm gives a good reach-to-stability ratio for fixtures where access is limited but firm support is required. The lever-style arrangement combines mechanical advantage with pneumatic speed, making the component suitable for fixture plates, assembly lines and automated jigs where secure, repeatable positioning is essential. Faster cycles and safer handling with pneumatic actuation Pneumatic actuation provides rapid, hands-free clamping that improves throughput and operator safety compared with manual levers. The mechanism supports high repeatability, reducing part rework caused by inconsistent clamping. Integrated into a production cell, the clamp contributes to streamlined workflows and repeatable quality, especially when paired with standard pneumatic control valves and simple maintenance checks. Contact Metav Werkzeuge today to secure the Kukamet Pneumatic clamp 612 for dependable, low-maintenance workholding — our consultants in Emmerich will advise on integration and supply options Technical data Article number: 612-3-D-C3 Manufacturer: Kukamet Material: Galvanised steel Mounting: Horizontal-foot Arm length: 167 mm Angle: 95° SKU: 612-3-D-C3 Facts Actuation force max: 2,000 N Holding force max: 2,500 N Arm: 167 mm Angle: 95° eClass: 21021004 ETIM: EC011973 Special features Massive holding arm Galvanised finish Horizontal-foot mounting Lever-style pneumatic clamp FAQ What maximum holding force does this clamp provide? The Pneumatic clamp 612 from Kukamet offers a maximum holding force of 2,500 N, which secures workpieces reliably for many assembly and fixture applications. How is the clamp mounted to a fixture? Mounting is via a horizontal-foot base designed for secure attachment to fixture plates and jig bases. Is the clamp suitable for production environments with occasional moisture? Yes, the galvanised steel construction of the Kukamet pneumatic clamp provides enhanced corrosion resistance appropriate for workshop conditions. What is the effective reach of the clamping arm? The unit features a 167 mm holding arm, offering a practical balance between reach and rigidity for typical jig and fixture layouts. Which clamping angle does the device use? The clamp operates with a 95° clamping angle, providing positive engagement and quick release for repeatable positioning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 2000 N Clamping Force, 2500 N Holding Force, Zinc Coated Massive Arm – Kukamet
Take advantage of the combination of robust pneumatic actuation and a massive holding arm for reliable, repeatable clamping in production and workshop fixtures; order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 631 Pneumatic Clamp — 2,000 N actuation, 2,500 N holding force The 631 pneumatic clamp is a compact pneumatic clamping element designed for fixture and jig applications in production and workshop environments. Robust zinc-plated construction 2,000 N pneumatic actuation force 2,500 N maximum holding force Horizontal-foot mounting for stability Reliable clamping performance that reduces rework The pneumatic drive delivers a clear, measurable actuation energy, with a 2,000 N nominal actuation force and a 2,500 N maximum holding force. This ratio ensures secure part retention during machining cycles, reducing movement-related rejects and downtime. The distinction between actuation and holding force is important for fixture design: the actuation value describes the force applied by the mechanism, while the higher holding value indicates the clamp’s capacity to resist separation under load — a practical advantage when repeatable, vibration-resistant clamping is required. Built for durability and stable installation Constructed from zinc-plated steel and fitted with a massive holding arm, the unit resists corrosion and mechanical wear typical of shop environments. The horizontal-foot mounting provides a low-profile, stable base that simplifies integration into fixtures or tooling plates and improves resistance to lateral loads. The 167 mm arm length offers an extended reach for deeper components while maintaining leverage for firm contact. These elements together extend service life and lower maintenance intervals. Easy integration into existing fixtures and minimal upkeep The device’s compact layout and standardised mounting allow quick installation into existing jigs; the horizontal-foot interface reduces alignment time on assembly stations. Fewer moving parts and the robust arm design limit routine adjustments, resulting in predictable maintenance cycles. For automated or semi-automated lines, the clamp’s pneumatic actuation is compatible with common compressed-air systems, enabling straightforward control via valves and pressure regulation while supporting consistent cycle times. For specification checks, integration advice or to request the Kukamet 631 pneumatic clamp (SKU 631-3-D-C3) for fixture trials, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 631-3-D-C3 GTIN: 8682843521625 Manufacturer: Kukamet Core specifications Actuation force (max): 2,000 N Holding force (max): 2,500 N Arm length: 167 mm Clamping angle: 95° Materials & features Zinc-plated construction Massive holding arm Horizontal-foot mounting ECLASS: 21021004 ETIM: EC011973 FAQ What maximum holding force does the clamp provide? The maximum holding capacity is 2,500 N; the Kukamet 631 pneumatic clamp is specified for secure retention in demanding cycles. Which mounting method is required for installation? The device is designed for horizontal-foot mounting, providing a stable interface for fixture plates and jigs. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation of the 631 is compatible with standard compressed-air systems and valve controls used in automated lines. What material and surface protection does the product have? The clamp is zinc-plated, offering corrosion resistance appropriate for workshop and production environments. What is the arm reach of the clamp? The holding arm measures 167 mm, allowing extended reach for deeper components while maintaining clamping leverage. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 2000 N Closing Force, 2500 N Holding Force, Galvanised Massive Arm Horizontal Base - Kukamet
Benefit from a robust, galvanised design, a 2,500 N maximum holding force and a compact 95° locking angle for precise, slip-free workholding; order the pneumatic toggle clamp 612 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Pneumatic Toggle Clamp 612 — 2,500 N holding force, galvanised finish 612 is a pneumatic toggle clamp engineered for secure fixture integration and fast cycle times in production and assembly applications *Robust galvanised construction *High holding force 2,500 N *117 mm heavy-duty arm *Horizontal-foot mounting for fixtures Secure clamping that reduces machining rejects The galvanised steel body provides a durable corrosion-resistant surface that maintains clamping integrity over many cycles. With a maximum holding force of 2,500 N and a pneumatic actuation input of up to 2,000 N, this clamp converts air pressure into reliable retention, reducing workpiece movement during machining or assembly. The result is fewer rejects, higher process stability and consistent part quality across repeat runs. Heavy-duty arm for dependable reach and clearance A 117 mm heavy-duty arm and a massive holding arm design deliver both reach and rigidity where it matters. The clamp’s 95° locking angle offers secure engagement with minimal overtravel, ensuring repeatable positioning in fixtures and jigs. This mechanical stability translates to predictable set-up times and lower fixture maintenance, supporting higher uptime in demanding production environments. Integration-friendly mounting for jigs and automation The horizontal foot mounting simplifies installation into existing tooling plates, modular fixture systems or automated workstations, allowing quick retrofit without major redesign. Pneumatic operation enables rapid cycle times and straightforward connection to shop compressed-air supplies, making the clamp suitable for semi-automated and automated lines. The galvanised finish also supports use in harsher shop-floor conditions. Clear technical data for engineering selection Specification essentials are presented plainly for procurement and design teams: galvanised material, holding force 2,500 N, actuation force 2,000 N, 117 mm arm length and horizontal-foot mounting. The compact form factor and repeatable performance make selection straightforward for engineers planning fixture layouts or upgrading existing clamping systems. The model is supplied with a clear SKU and GTIN for inventory tracking and BOM management. For reliable fixture performance and expert procurement support, request a detailed technical datasheet or place an enquiry for the Kukamet pneumatic toggle clamp 612 through Metav Werkzeuge — contact our advisors in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored guidance and fast supply Technical Data SKU: 612-3-D-C2 GTIN: 8680731501681 Manufacturer: Kukamet Mounting: horizontal foot Material: galvanised Facts Arm length: 117 mm Holding force max: 2,500 N Actuation force max: 2,000 N Locking angle: 95° Special features Massive holding arm Horizontal-foot mounting Galvanised finish eCl@ss: 21021004 ETIM: EC011973 FAQ What is the maximum holding force of this clamp? The maximum holding force is 2,500 N for the Kukamet pneumatic toggle clamp 612, specified for stable workpiece retention in production fixtures. Can the clamp be mounted directly to a fixture plate? Yes, the clamp features a horizontal foot mounting that permits direct installation into fixture plates and modular tooling systems. What material is the clamp made from and why does it matter? The clamp is made from galvanised steel; the galvanised finish improves corrosion resistance and extends service life in typical workshop environments. What arm length does the clamp provide and what benefit does that give? The clamp uses a 117 mm arm, providing increased reach and clearance for a variety of workpiece sizes while maintaining rigidity during clamping. Is the clamp suitable for automated cycles? Pneumatic actuation and compact mounting make the clamp well suited to semi-automated or automated processes where rapid, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 230mm Arm, 4.5kN Thrust / 5kN Hold, Horizontal Base, Galvanised – Kukamet
Secure and stable clamping is achieved with the Kukamet 631, combining a 5,000 N holding force with a galvanised, corrosion-resistant finish and a 230 mm reinforced clamping arm; order directly via Metav Werkzeuge or contact our consultants for specification advice. Kukamet 631 Pneumatic Clamp — Galvanised, 5,000 N holding force The 631 pneumatic clamp is a horizontal-foot mounted clamping solution for repetitive production tasks, offering robust holding capacity and extended reach for fixtures and jigs Robust 5,000 N holding force Galvanised construction for corrosion resistance Massively reinforced 230 mm clamping arm Horizontal-foot mounting for stable installation 95° open angle for flexible workpiece access Secure high-force clamping for consistent production The pneumatic clamp delivers a defined holding force of 5,000 N and an actuation force of 4,500 N, which translates into reliable workpiece fixation during machining and assembly. The 230 mm clamping arm provides extended reach while the massive holding arm construction reduces deflection under load, contributing to improved part accuracy and fewer reworks. Emphasis on repeatability and cycle stability makes this clamp suitable for serial production and automated fixtures where consistent force and positioning are required. Durable build for low maintenance and long service life Constructed with a galvanised finish and a reinforced arm, the device resists corrosion and mechanical wear in workshop environments. Pneumatic actuation reduces mechanical complexity compared with manual levers, lowering the frequency of wear-related interventions and simplifying routine checks. The robust materials and design support uninterrupted operation in heavy-use contexts, offering quality continuity across production batches and a dependable lifespan that supports cost-effective maintenance planning. Flexible mounting and ergonomic access to the workpiece Designed for a horizontal foot attachment, the clamp integrates easily into jigs, fixtures and modular tooling plates without occupying excessive vertical space. The 95° open angle allows uncomplicated loading and unloading of components, improving operator ergonomics and throughput. Stable foot mounting combined with the reinforced arm provides confidence when positioning larger or awkwardly shaped parts, enabling a simpler setup and reduced clamping adjustments between cycles. Efficient integration and safe handling in automated cells As a pneumatic clamping element, the unit is suitable for inline automation and can be controlled via standard compressed-air valves and controls. The clearly defined forces and compact footprint facilitate predictable cycle times and faster takt rates, improving overall equipment effectiveness. Safety and process reliability benefit from the repeatable actuation characteristics, which help to minimise unexpected part movement and contribute to consistent quality in series production environments. Contact Metav Werkzeuge to discuss how the Kukamet 631 fits specific fixtures and production requirements and to arrange supply from Emmerich with full technical support. Technical data SKU: 631-5-D-C3 Article name: Pneumatic clamp 631 Manufacturer: Kukamet Material: Galvanised Mounting: Horizontal foot Clamping arm length: 230 mm Max actuation force: 4,500 N Max holding force: 5,000 N Open angle: 95° Special feature: Solid reinforced holding arm ECLASS: 21021004 ETIM: EC011973 Core technical figures Arm length: 230 mm Actuation force: 4,500 N Holding force: 5,000 N Open angle: 95° Design and special features Galvanised surface treatment Horizontal-foot mounting Massive/reinforced clamping arm Pneumatic actuation Suitable for jigs and fixtures FAQ What is the maximum holding force of this clamp? The Kukamet 631 pneumatic clamp provides a maximum holding force of 5,000 N, ensuring secure fixation during machining and assembly operations. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the Kukamet 631 is designed for stable horizontal-foot installation on jigs and tooling plates. Is the clamp suitable for automated production cells? Yes, the pneumatic actuation and defined forces of the 631 make it suitable for integration into automated lines and valve-controlled clamping sequences. What protection against corrosion does the clamp offer? The 631 features a galvanised finish, providing enhanced resistance to corrosion in workshop and production environments. Which SKU should be referenced when ordering or requesting documentation? Please reference SKU 631-5-D-C3 for technical sheets, spare parts and ordering information for the Kukamet 631 pneumatic clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 600 N Push Force, 1000 N Hold, 16 mm Piston, Zinc Coated, Horizontal Base, Massive Arm - Kukamet
Take advantage of the combination of galvanised construction and a massive holding arm with reliable pneumatic actuation for consistent clamping in serial production and assembly fixtures. The device delivers 600 N actuation force with up to 1,000 N holding capacity, enabling stable workholding and reduced cycle variation. Order the Kukamet 611 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 611 Pneumatic Clamp – 600 N actuation, 95° stroke A robust 611 pneumatic clamp for industrial workholding and fixture applications, fitted with a horizontal mounting foot and a massive holding arm. Galvanised body for corrosion resistance Up to 600 N pneumatic actuation force Holding capacity up to 1,000 N Horizontal base with massive holding arm Consistent clamping for repeatable production results The air-operated design of this pneumatic clamp ensures repeatable strokes and consistent clamping pressure, which reduces process variability in production runs. With an actuation output of 600 N and a mechanical holding capacity of 1,000 N, the mechanism separates actuation force from final clamping capacity, improving safety margins in fixtures. The combination of pneumatic drive and a compact piston means quicker cycle times and less manual handling, supporting higher throughput in assembly and machining tasks. Built to withstand workshop demands while simplifying jig design Constructed in galvanised steel and supplied with a horizontal base, the unit resists corrosion and integrates cleanly into welded jigs or plate-mounted fixtures. The 94 mm arm delivers extended reach while maintaining rigidity, and the near-right 95° stroke angle allows secure positioning of odd-shaped components. These characteristics reduce the need for complex secondary supports and simplify fixture layouts, helping to shorten setup times and enhance process reliability. Straightforward integration and low-maintenance operation Designed for system integration with standard compressed-air supplies and basic pneumatic control valves, the clamp features a piston diameter 16 mm that balances compactness with force output. The robust design supports low maintenance intervals and easy inspections, which helps to keep toolroom downtime minimal. For specification matching and installation advice, Metav’s advisors can provide component-level data and mounting recommendations to suit bespoke fixture systems. Contact Metav Werkzeuge today for supply and technical advice on Kukamet pneumatic clamps such as the 611 with 600 N actuation and 1,000 N holding capacity Technical data SKU: 611-1-Q16-D-C2 GTIN: 8682843521564 Model: 611 Type: Pneumatic clamp Brand: Kukamet Core specifications Max actuation force: 600 N Max holding force: 1,000 N Arm length: 94 mm Piston diameter: 16 mm Stroke angle: 95° Features & materials Material: galvanised Mounting: horizontal foot Massive holding arm Category: Spanner eCl@ss: 21021004 ETIM: EC011973 FAQ What clamping force does the Kukamet 611 provide and how does it differ from actuation force? The Kukamet 611 pneumatic clamp delivers an actuation force of 600 N while the mechanical arrangement yields a holding capacity up to 1,000 N, meaning the actuator power and the final clamp retention are optimised independently for safer workholding. Is the 611 suitable for production fixtures exposed to humidity or coolant? Yes, the galvanised finish on the 611 provides enhanced corrosion resistance, making the clamp appropriate for workshop environments where moisture or coolant exposure is present. How is the Kukamet 611 mounted in a jig or fixture? The 611 is supplied with a horizontal foot for plate mounting; the horizontal base enables straightforward bolting to fixture plates or subplates for secure integration. What are the key dimensions to consider when planning a fixture with this clamp? Important measurements include the 94 mm arm reach, piston diameter 16 mm, and the 95° stroke angle; these determine clearances, reach and orientation within the jig design. Can the clamp be integrated into existing pneumatic control systems? The clamp is designed for standard compressed-air integration and can be controlled via conventional valves and fittings; Metav Werkzeuge can advise on compatible fittings and valve arrangements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 600 N Push, 1000 N Hold, 16 mm Piston, Zinc Coated Heavy‑Duty Arm - Kukamet
Take advantage of a robust, galvanised pneumatic clamp that combines a massive holding arm with precise pneumatic actuation for reliable fixture retention and fast cycle times; order the clamp via Metav Werkzeuge or contact their advisors for technical guidance and supply from Emmerich. 611 Pneumatic Clamp by Kukamet — 600 N pneumatic force, 144 mm arm A 611 pneumatic clamp designed for secure fixturing in machining and assembly, mounted on a horizontal foot for straightforward integration into jigs and fixtures Massive holding arm, robust construction 144 mm reach for deep fixtures 95° swivel angle for flexible clamping Galvanised finish resists corrosion Consistent force and fast, repeatable cycles The unit is a pneumatic clamp engineered to deliver reliable actuation with a maximum pneumatic force of 600 N. The actuator uses a 16 mm piston, which translates air pressure into controlled linear motion and predictable clamping forces; this reduces variability between cycles and supports short cycle times in production environments. For operators and engineers, the technical benefit is clear: reduced set-up time and fewer adjustments during batch runs. The device’s design supports repeatable positioning, enabling consistent part quality across multiple operations. Rigid construction for secure fixturing and longevity A massive holding arm and galvanised body form the core of a clamp intended for heavy-duty use. The galvanised finish improves corrosion resistance in mixed workshop environments and contributes to long service life with minimal maintenance. The mechanism provides a maximum holding capacity of 1000 N, offering vibration-resistant retention for machining tasks where stability is essential. The combination of sturdy geometry and protective coating means fewer replacements and a lower total cost of ownership for the fixture system. Flexible mounting and straightforward integration into systems Installation is simplified by the horizontal foot mounting, which supports a compact footprint and easy locating in existing clamping plates or tooling blocks. With a reach of 144 mm and a 95° angle, the clamp adapts to varied part geometries and tight layouts without extensive fixture redesign. Identification for procurement and documentation is available as SKU 611-1-Q16-D-C3 and GTIN 8682843521571, enabling rapid replacement and inventory control. The design promotes compatibility with automated systems and manual jigs alike, improving workflow continuity in workshops and production lines. Choose the Kukamet 611 pneumatic clamp for dependable, repeatable clamping and contact Metav Werkzeuge in Emmerich for ordering or technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 611-1-Q16-D-C3 GTIN: 8682843521571 eClass: 21021004 ETIM: EC011973 Manufacturer: Kukamet Numbers / Core technical data Arm length: 144 mm Piston diameter: 16 mm Clamping force (max): 600 N Holding force (max): 1000 N Angle: 95° Special features Mounting: horizontal foot Material: galvanised Massive holding arm Category: pneumatic clamp Files: 611-612-631-651-652-katalogseite.pdf Image: 611-D-main.jpg FAQ What clamping force does the 611 pneumatic clamp deliver? The Kukamet 611 pneumatic clamp delivers up to 600 N of pneumatic clamping force with a maximum holding capacity of 1000 N; piston diameter 16 mm ensures stable actuation. How is the clamp mounted and what reach does it provide? Mounting is via a horizontal foot; the clamp offers a 144 mm reach and a 95° swivel angle for flexible positioning in fixtures. Is the clamp suitable for harsh workshop environments? Yes, the galvanised finish provides corrosion resistance and the massive holding arm improves durability for heavy-duty applications. Can the clamp be used in automated production? The pneumatic actuation and compact horizontal-foot mounting make the clamp suitable for integration into automated handling and assembly systems. Which parts of industry is this clamp intended for? The clamp is intended for machining, assembly, jigs and fixtures where stable, repeatable clamping is required; it is supplied as SKU 611-1-Q16-D-C3 by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 62mm Arm, 1,200 N Push Force, 1,400 N Hold Force, Zinc Plated, Horizontal Foot - Kukamet
Take advantage of a robust combination of precise clamping force and durable construction: the galvanised body and massive 62 mm holding arm ensure consistent positioning and long service life, while the 1,200 N pneumatic actuation and 1,400 N holding capacity deliver reliable process stability. Order the clamp directly via Metav Werkzeuge or contact their consultants for technical advice. Pneumatic clamp 612 — horizontal-foot lever clamp with 1,200 N actuation (Kukamet) Pneumatic clamp 612 offers fast, repeatable lever clamping for fixture and jig applications in workshops and light production environments Pneumatic clamp with 1200 N actuation force Massive 62 mm holding arm Galvanised construction for corrosion resistance Horizontal foot for stable mounting Consistent clamping performance that speeds production The pneumatic actuation delivers a defined 1,200 N drive force combined with a 1,400 N maximum holding capacity, providing a clear separation between actuation and retention. This difference means the device closes quickly under pneumatic pressure and maintains workpiece position under load, reducing rework and cycle-time losses. The 95° lever geometry gives a compact movement path for short stroke installations. These technical values make the clamp particularly suitable where repeatability and throughput are primary concerns, providing measurable process reliability on assembly benches and inspection fixtures. Built for resilience and low maintenance Constructed from galvanised steel and equipped with a massive 62 mm holding arm, the unit resists corrosion and mechanical wear typical in workshop environments. The horizontal foot mounting ensures a low-profile attachment to plates and fixtures while spreading load for secure installation. The robust arm geometry improves contact stability and reduces deflection under side loads, which translates into fewer alignment checks and longer intervals between maintenance interventions. The durable finish supports long-term use, contributing to cost-effective operation over the lifetime of the tool. Simple integration and clear technical fit The clamp is supplied as a lever-type pneumatic unit with a horizontal mounting arrangement and a compact arm length of 62 mm, making it straightforward to incorporate into existing jigs and modular tooling plates. Actuation and holding forces are stated in newtons for direct engineering comparison; actuation force refers to the pneumatic drive available to move the lever, while holding force describes the maximum static retention once clamped. The model’s concise footprint and lever angle of 95° permit close-packed installations and predictable clearance planning. For specification matching and inventory queries, refer to the model SKU and consult Metav Werkzeuge for compatibility with fixture standards. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance, stock information and tailored supply solutions for the Kukamet Pneumatic clamp 612 Technical Data SKU: 612-2-D-C1 Model: 612 Manufacturer: Kukamet Arm: 62 mm Actuation force: 1,200 N Holding force: 1,400 N Angle: 95° Material: Galvanised Mounting: Horizontal foot Type: Pneumatic clamp Feature: Massive holding arm FAQ What clamping and holding forces does the unit provide? The pneumatic unit offers an actuation force of 1,200 N and a maximum holding capacity of 1,400 N, providing fast closure and secure retention for typical fixture tasks with the Pneumatic clamp 612. How is the clamp mounted to a fixture? The clamp uses a horizontal foot mounting system designed for secure attachment to plates and jigs; this arrangement is part of the 612 design for compact, stable installation. Is the clamp suitable for corrosive workshop environments? The body and arm are galvanised, offering enhanced resistance to corrosion and making the clamp suitable for standard workshop conditions where occasional exposure to humidity and shop contaminants occurs. What is the arm length and how does that affect installation? The holding arm measures 62 mm, providing a compact reach that allows close-packed placement of multiple clamps and predictable clearance when planning tooling layouts. At what angle does the lever operate? The lever operates at 95°, giving a short, controlled motion suitable for tight assemblies and quick actuation cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 67mm Arm, 2,000N Push / 2,500N Hold, Zinc Coated, Heavy-Duty Horizontal Base - Kukamet
Take advantage of the combination of robust clamping performance, a massive galvanised holding arm and simple horizontal-foot mounting for reliable, repeatable workholding. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. 612 Pneumatic Clamp — massive holding arm, 2,500 N holding force (Kukamet) The 612 is a horizontal-foot pneumatic clamp engineered for secure workpiece retention in industrial fixtures and jigs, combining compact reach with durable construction for continuous production use. Massive holding arm for high stability Up to 2,500 N holding force 67 mm arm reach for compact fixtures Consistent, measurable clamping that reduces rework The galvanised design and massive holding arm deliver a stable clamping point that reduces vibration and part movement during machining. With a rated holding force of 2,500 N, this clamp provides a clear, quantifiable improvement in fixture stability, which in turn lowers scrap rates and saves time on set-up checks. The robust build translates directly into fewer interruptions on the production line and a more predictable output. Simple integration into jigs and fixtures for faster set-up Mounting via the horizontal foot simplifies placement on plates and frames; the mount allows the clamp to be positioned flush to datum surfaces for repeatable alignment. The 67 mm arm reach is optimised for compact fixtures where space is limited but access and clearance are still required. The galvanised finish improves surface durability and resists corrosion in typical workshop environments, extending service life and reducing maintenance interventions. Pneumatic actuation tuned for industrial throughput Pneumatic actuation delivers a dependable pneumatic actuation force of 2,000 N, enabling rapid, repeatable clamp cycles suited to automated or semi-automated processes. The 95° operation angle ensures a secure locking position, while the compact format keeps the overall footprint small in multi-clamp setups. Supplied as a rugged, workshop-ready unit (SKU 612-3-D-C1) from Kukamet, the clamp is intended for demanding production use where repeatability and robustness are priorities. For robust, compact clamping choose the Kukamet 612—contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Product details Article number: 612-3-D-C1 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Core technical data Arm reach: 67 mm Pneumatic force: 2,000 N Holding force: 2,500 N Operating angle: 95° Materials & features Material: Galvanised Mounting: Horizontal foot Massiver Haltearm: yes Product type: Pneumatic clamp FAQ What maximum holding force does the clamp offer? The clamp provides a holding force of 2,500 N; this holding performance is suitable for a wide range of fixture applications with high repeatability. What is the pneumatic actuation capability? Pneumatic actuation supplies up to 2,000 N of force for rapid and repeatable clamping cycles on the Kukamet pneumatic clamp (SKU 612-3-D-C1). How is the clamp mounted in a fixture? The unit is designed for mounting with a horizontal foot, allowing flush installation on fixture plates and easy alignment with datum surfaces. Is the finish suitable for workshop environments? The galvanised finish delivers basic corrosion resistance suitable for typical workshop conditions and contributes to long service life. What reach does the clamp arm provide and where is it best used? The arm reach of 67 mm makes the clamp well suited to compact fixtures and jigs where space is limited but reliable access and clearance are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp 750 N Push Force, 1,000 N Hold Force, Horizontal Foot, Massive Arm, Zinc-Plated - Kukamet
Take advantage of the combination of solid clamping performance, compact arm geometry and corrosion-resistant finish for reliable fixture work in automated or manual production. Order the 631 pneumatic clamping lever directly via Metav Werkzeuge or ask the consultants for tailored application advice. 631 Pneumatic clamping lever with horizontal foot, 750 N clamping force (Kukamet) A 631 pneumatic clamping lever designed for secure, repeatable fixture holding in production and assembly applications. Massive holding arm for stable clamping 44 mm arm for compact fixture layouts Horizontal-foot mounting for flush installation Galvanised finish for corrosion resistance Faster, measurable clamping for consistent production The pneumatic design delivers a defined 750 N clamping action and a 1,000 N holding capacity, providing measurable force values that support process control. Using a pneumatically driven actuator ensures short cycle times and consistent force application, which reduces variability between cycles and improves part quality. The lever-style action converts compressed-air energy into a robust locking motion, enabling straightforward integration into semi-automatic and fully automated workstations. Emphasis on repeatability and controlled clamping force makes this solution particularly suitable where process stability and throughput are priorities. Compact mounting that saves space without sacrificing strength With a 44 mm arm and a horizontal foot mounting, this clamping lever is built for compact fixture designs and low-profile installations. The massive holding arm provides a short lever moment while maintaining rigidity, which benefits machining and assembly operations with tight spatial constraints. A clamp angle of 95° offers a defined end position for reliable part retention and easy positioning during workpiece loading. The galvanised surface protects components in harsh workshop environments, extending service intervals and lowering the lifecycle cost through reduced corrosion-related wear. Designed for robust, low-maintenance operation on the shop floor Constructed for industrial use, the unit combines simple pneumatic actuation with minimal mechanical complexity to reduce maintenance demands. The combination of controlled clamping force and sturdy construction lessens the risk of slippage and part deformation, which in turn lowers rework rates and machine downtime. The clamp is suitable for repeated-cycle applications in fabrication, welding jigs and assembly fixtures where a balance of strength and speed is required. Technical integration is simplified by standardised mounting and clear specification of clamping and holding forces, supporting predictable machine setup and easier qualification in production processes. Choose the Kukamet 631 for dependable, compact pneumatic clamping — contact Metav Werkzeuge for application support and local supply from Emmerich. Technical data Article number: 631-1-D-C1 Brand: Kukamet Material: Galvanised Mounting: Horizontal foot Core data Arm length: 44 mm Maximum clamping force: 750 N Maximum holding force: 1,000 N Clamp angle: 95° ECLASS: 21021004 ETIM: EC011973 Special features Massive holding arm Galvanised finish Pneumatic actuation Category: Clamps FAQ What clamping force does the 631 deliver? The 631 pneumatic clamping lever provides a defined clamping force of 750 N and a maximum holding capacity of 1,000 N for reliable fixture retention. Which mounting orientation is required? The device is designed for horizontal-foot mounting to enable flush installation in fixtures and jigs. What material and surface protection does it have? The clamping lever is made with a galvanised finish to improve corrosion resistance for workshop environments. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation and consistent force output make the 631 suitable for semi-automatic and fully automated production systems. How compact is the lever for tight fixture layouts? A 44 mm arm length allows compact fixture design while maintaining the necessary rigidity for secure clamping. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 1,200 N Push, 1,400 N Hold, Zinc Plated - Kukamet
Take advantage of a corrosion-resistant, galvanised design combined with dependable pneumatic actuation and measurable clamping performance for consistent fixture results; order via Metav Werkzeuge or request technical guidance from our consultants for fast supply from Emmerich. Kukamet Pneumatic Toggle Clamp 612 — galvanised, 1,200 N clamping force A 612 pneumatic toggle clamp engineered for secure, repeatable workholding in production jigs and workshop fixtures, providing rapid cycle control and stable part retention. Galvanised surface for corrosion resistance 1,200 N pneumatic clamping force 1,400 N maximum holding force Horizontal foot mounting, 95° lever angle Consistent, measurable force for repeatable production The pneumatic actuation delivers a controlled clamping force of 1,200 N, backed by a holding force rated at 1,400 N, which translates into reliable part fixation across repetitive cycles. Specifying a clamp with defined force values supports process planners and quality engineers by reducing variability at the workpiece interface; measured values make it straightforward to compare the clamp against alternative fixtures and to calculate safety margins for fragile or machined components. Corrosion resistance and compact mounting for tight installations A galvanised finish provides basic protection against corrosion, extending service life where ambient moisture or light contamination is present. The clamp’s horizontal foot mounting and 95° lever angle are optimised for integration into confined jigs and conveyor-mounted fixtures, allowing a compact footprint and straightforward alignment. This combination reduces rework time during assembly of fixtures and simplifies retrofit into existing tooling layouts. Lightweight construction and low maintenance for workshop use Weighing 0.535 kg, the unit is light enough to be handled easily during fixture assembly yet robust for industrial use. As a pneumatic toggle clamp, it converts compressed-air control into repeatable clamping strokes with a simple pneumatic valve, reducing mechanical wear compared with manually actuated levers. The galvanised steel construction requires minimal upkeep, supporting uptime-focused operations where straightforward replacement and predictable lifecycle planning are prioritised. Secure production clamping with the Kukamet 612 — contact Metav Werkzeuge for specification support and fast delivery from Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 612-2 GTIN: 8680731501704 Manufacturer: Kukamet Facts Clamping force: 1,200 N Holding force: 1,400 N Weight: 0.535 kg Lever angle: 95° eClass: 21021004 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal foot Design: pneumatic toggle clamp Catalog page: 612-katalogseite.pdf FAQ What is the rated clamping force of this clamp? The Kukamet 612 pneumatic toggle clamp has a rated clamping force of 1,200 N and a maximum holding force of 1,400 N. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, designed for secure bolting into jigs and fixture plates to ensure stable positioning. Is the surface treated for corrosion protection? Yes, the unit is galvanised, providing basic corrosion resistance suitable for workshop and light industrial environments. What is the weight of the clamp for handling and fixture calculation? The clamp weighs 0.535 kg, facilitating easy handling during assembly and minimal impact on moving fixture sections. Does this clamp require special maintenance or lubrication? Routine inspection and standard pneumatic maintenance are sufficient; the galvanised finish and pneumatic actuation minimise mechanical servicing needs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 2,000 N Push, 2,500 N Hold, Zinc-Plated - Kukamet
Benefit from a compact, corrosion-resistant pneumatic lever clamp that delivers up to 2,000 N of clamping force and a 2,500 N holding capacity; the horizontal foot ensures secure, repeatable mounting and short setup times. Order the 612 directly via Metav Werkzeuge or consult our technical team for specification support. 612 Pneumatic Lever Clamp — 2,000 N Force, Galvanised (Kukamet) A 612 pneumatic lever clamp for horizontal-foot mounting, designed to provide quick, reliable workholding in production and workshop fixtures Galvanised steel for corrosion resistance Horizontal foot mounting for stable set-up 2,000 N pneumatic force for rapid clamping 2,500 N holding capacity for secure workpieces Faster clamping cycles to increase throughput The pneumatic actuation of this lever clamp converts compressed-air input into a rapid, controlled clamping motion, enabling shorter cycle times and more consistent fixturing. With a rated 2,000 N pneumatic force, the mechanism applies sufficient power to engage workpieces quickly while the 2,500 N holding capacity maintains position during machining or assembly. This combination reduces manual rework and helps standardise production processes, supporting measurable efficiency gains on the shop floor. Robust construction that withstands workshop use Constructed from galvanised steel, the clamp offers enhanced corrosion resistance for long-term reliability in demanding environments. The unit weight of 0.86 kg keeps the component manageable for fixture assemblies while contributing minimal additional mass to the tooling. The 95° clamping angle provides a secure engagement geometry that is particularly useful for repetitive operations, where consistent clamping force and durability are essential for part quality and operator confidence. Compact mounting for simple integration into fixtures Designed with a horizontal foot mounting arrangement, the clamp integrates easily into modular tooling plates and jigs without requiring complex adapters. The flat mounting base facilitates precise alignment and stable attachment, so the component can be positioned close to the workpiece to save space and improve accessibility. The lever-style actuation delivers an intuitive motion, allowing rapid locking and unlocking in automated or manual workflows. Industrial suitability and application range This lever clamp is suited to general workshop and light industrial fixturing where pneumatic control and reliable holding are required. The galvanised finish and solid construction make it appropriate for repeated use in production cells, assembly benches or CNC setups. As a standardised clamping element, it supports lean tooling strategies by reducing setup variability and lowering the risk of workpiece displacement during critical operations. For dependable clamping performance with Kukamet quality, contact Metav Werkzeuge for ordering and detailed technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 612-3 GTIN: 8680731505245 ECLASS: 21021004 ETIM: EC011973 Facts Max. pneumatic force: 2,000 N Max. holding force: 2,500 N Weight: 0.86 kg Clamping angle: 95° Special features Material: galvanised steel Mounting: horizontal foot Arm: not applicable Special characteristic: none FAQ What maximum clamping and holding force does the clamp provide? The clamp delivers a pneumatic force of 2,000 N and a holding capacity of 2,500 N for secure workholding with consistent performance. Is the clamp suitable for use in corrosive workshop environments? The unit is made from galvanised steel, which offers improved corrosion resistance suitable for general workshop conditions. How is the clamp mounted to a fixture plate? The clamp uses a horizontal foot mounting that enables stable, space-saving attachment to tooling plates and jigs. What is the weight of the clamp and how does that affect fixture design? The clamp weighs 0.86 kg, allowing easy handling and minimal added mass to modular fixtures without compromising stability. Can the clamp be used for automated production cycles? Yes, the pneumatic actuation and lever-style motion are designed for integration into automated or semi-automated fixturing solutions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 3,000 N Thrust, Zinc-Plated - Kukamet
Take advantage of the combination of consistent pneumatic clamping, a 3,300 N maximum holding force and a compact, galvanised design for dependable workholding in small and medium production runs. Order the unit directly via Metav Werkzeuge or consult the team for application advice. 611 Pneumatic Clamp (Horizontal-foot) — galvanised, 3.3 kN holding force The 611 is a pneumatic clamp designed for secure workholding in metalworking and general workshop applications, providing rapid actuation and stable clamping with a horizontal-foot mounting. Galvanised surface for improved corrosion resistance Horizontal-foot mounting for simple installation 3,300 N maximum holding force for secure fixation Compact design at 1.69 kg for space-efficient setups Consistent pneumatic performance that stabilises processes The 611 delivers a predictable clamping cycle through its pneumatic actuation, converting compressed air into repeatable clamping motion. With an actuating force of 3,000 N and a holding force of 3,300 N, the device reduces variability at the clamping stage and supports a stable production flow. This controlled force profile shortens setup times and minimises rework by keeping components immobilised during machining or inspection. The mechanism’s defined 95° operating angle ensures a reliable contact geometry that aids repeatability in serial tasks. Compact mounting and corrosion protection for long service life Fitted with a horizontal foot, the clamp can be mounted on flat machine beds or fixtures without complex adapters, enabling fast retrofitting. The galvanised finish provides a protective layer against mild corrosive environments, extending service intervals where humidity or splashing oils are present. At only 1.69 kg, the unit is lightweight yet robust, allowing integration into fixtures where space and mass constraints matter. The combination of compactness and durable surface treatment supports both mobile jig systems and fixed production cells. Low-maintenance design geared to workshop reliability Engineered for practical workshop use, the clamp combines straightforward mechanical design with easily accessible mounting interfaces. The simple construction minimises routine maintenance and shortens downtime between shifts, while the galvanised components reduce the need for frequent replacements due to surface wear. Suitable for a wide range of general clamping tasks, the device contributes to leaner tooling inventories and predictable machine availability, supporting efficient workflows in both maintenance shops and production environments. Contact Metav Werkzeuge in Emmerich for availability and tailored technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Product: Pneumatic clamp 611 SKU: 611-4 GTIN: 8680731502916 Manufacturer: Kukamet Facts Weight: 1.69 kg Actuating force: 3,000 N Holding force: 3,300 N Operating angle: 95° eClass: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Category: Spanner FAQ What clamping and holding forces are provided by this clamp? The 611 pneumatic clamp offers an actuating force of 3,000 N and a maximum holding force of 3,300 N, delivering secure fixation for typical workshop and light industrial tasks. How is the clamp mounted on a fixture or machine bed? Mounting is by the horizontal foot; the 611 is designed for straightforward bolting to flat surfaces and fixture plates to simplify integration into existing setups. Is the surface finish suitable for humid workshop environments? Yes, the galvanised coating on the 611 improves resistance to corrosion and surface oxidation, reducing maintenance in environments with occasional moisture or splashing oils. What advantages does pneumatic actuation bring to production? Pneumatic actuation in the 611 provides rapid, repeatable clamping cycles, supporting shorter setup times and consistent workholding that reduces rework and increases throughput. How much maintenance does the clamp require? The clamp’s simple mechanical design and protective galvanised finish minimise routine maintenance; regular checks of mounting fasteners and pneumatic connections are recommended to maintain consistent performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 600 N Stroke, Zinc-Plated 16 mm Piston - Kukamet
The robust combination of a compact 16 mm piston, 600 N actuation force and a galvanised finish ensures reliable clamping in automated fixtures; take advantage of consistent performance and easy integration for uninterrupted production. Order the component directly via Metav Werkzeuge or consult the team for application advice. 611 Pneumatic clamp by Kukamet — 95° pivot, 16 mm piston The 611 pneumatic clamp is a horizontal-foot clamping unit for industrial fixturing, engineered for rapid automated actuation and secure holding in production and assembly contexts. 600 N actuation force for swift clamping 1,000 N holding force for secure fixation Horizontal foot for stable base mounting 16 mm piston diameter for compact power Consistent clamping power that keeps production moving The compact actuator delivers a clear performance profile: 600 N of actuation force and a 1,000 N holding capacity provide a high force-to-size ratio that benefits short-cycle automation and repetitive jigs. The internal piston, specified at 16 mm, converts compressed-air input into controlled linear force; this mechanical advantage reduces fixture complexity and shortens cycle times. Presented as a precision clamping element, the unit supports predictable repeatability, helping to reduce rework and minimise process interruptions. Space-saving design eases integration and service A low-profile housing with a horizontal foot mount simplifies mechanical integration in existing tooling plates and multi-station fixtures. At 0.275 kg, the lightweight construction reduces inertial loading on moving subassemblies and enables faster indexing of rotary or linear positioning systems. The compact dimensions and standardised mounting allow straightforward replacement of manual clamps with pneumatic operation, improving throughput without major retooling. Routine maintenance is facilitated by accessible mounting points and a design that separates the actuator from the mounting interface. Corrosion resistance and application versatility The galvanised finish protects the component in workshop and moderate industrial environments, extending service life where coolant splash or humidity are present. Specified as a pneumatic lever-style clamp, the device is suitable for a range of clamping tasks on workpiece carriers, assembly jigs and CNC fixtures. Its design supports integration with common pneumatic control systems; the clear force ratings and piston size enable accurate calculation of required air supply and cycle timing. This makes the clamp appropriate for metalworking and general workshop use where a compact, repeatable clamp is required. Contact Metav Werkzeuge for tailored application support or to place an order for the Kukamet 611 pneumatic clamp; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 611-1-Q16 SKU: 611-1-Q16 GTIN: 8680731502879 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Actuation force: 600 N Holding force: 1,000 N Piston diameter: 16 mm Angle: 95° Weight: 0.275 kg Special features Mounting: horizontal foot Finish: galvanised Type: pneumatic lever clamp Category: Spanner FAQ What is the maximum clamping force of this pneumatic clamp? The Kukamet 611 pneumatic clamp provides a holding force of 1,000 N and an actuation force of 600 N as specified for fixture design. Which mounting method is used for installation? The unit features a horizontal foot mounting style suitable for direct attachment to fixture plates and sub‑bases. What is the piston diameter and why does it matter? The piston diameter is 16 mm; this dimension determines the actuator’s stroke force and is used to calculate required pneumatic pressure for the intended cycle time. Is the finish suitable for workshop environments with occasional coolant exposure? Yes, the galvanised finish enhances corrosion resistance, making the clamp suitable for workshop and light industrial conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
95° Pneumatic Clamp Horizontal Base 750 N Thrust, 1000 N Hold Force, Zinc-Plated - Kukamet
Take advantage of a compact, corrosion‑resistant clamp that delivers 750 N of pneumatic clamping force and up to 1,000 N holding capacity for reliable fixtures. The zinc‑plated design and a 20 mm piston diameter ensure consistent actuation and long service life — order the unit directly via Metav Werkzeuge or contact our consultants for application advice. 611 Pneumatic Clamp with 750 N Clamping Force (Kukamet) The 611 is a compact pneumatic clamp for secure workholding in production, automation and fixture assemblies. Zinc-plated compact construction 750 N pneumatic clamping force 1,000 N maximum holding force Horizontal base with 95° operating angle Consistent clamping performance for repeatable production The 611 pneumatic clamp combines a controlled pneumatic actuation with a 20 mm piston to produce a steady 750 N clamping force, providing reproducible results cycle after cycle. The listed 1,000 N holding force indicates the device’s ability to withstand shear and pull forces once engaged; this distinction between clamping and holding values is important when designing jigs or fixtures. The lightweight construction of 0.36 kg minimises added mass on moving fixtures while still delivering industrially relevant force levels, supporting efficient cycle times and stable part positioning. Compact mounting and corrosion-resistant construction for easy integration Engineered with a horizontal base, the clamp fits low‑profile layouts and is suitable for inline and side‑mounted fixtures where space is limited. The 95° operating angle defines the toggle travel and contact geometry, allowing predictable part engagement within tight envelopes. The zinc‑plated finish provides basic corrosion resistance for workshop and light industrial environments, reducing maintenance frequency and ensuring visible wear remains limited. Its compact footprint and nominal weight simplify retrofits and automation integration without extensive rework to existing tooling. Practical use cases and straightforward upkeep This actuated clamp suits repetitive clamping tasks in assembly, fixture and test stations where pneumatic supply is available. The robust mechanical design supports high cycle counts; regular checks of the pneumatic supply and mounting fasteners are the primary maintenance actions. When specifying applications, consider the separate values for actuation force and holding capacity to match clamping pads and workpiece materials. The clamp is identified as SKU 611-1-Q20 and can be referenced in procurement and spare‑parts lists for streamlined replacement and traceability. For purchase or technical consultation on the Kukamet 611 pneumatic clamp, contact Metav Werkzeuge — reliable supply and application support from Emmerich is available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: 611-1-Q20 GTIN: 8680731502886 Manufacturer: Kukamet Weight: 0.36 kg Material: Zinc-plated Article category: Clamp (Spanner) Core figures Maximum clamping force: 750 N Maximum holding force: 1,000 N Piston diameter: 20 mm Operating angle: 95° eClass: 21021004 ETIM: EC011973 Features & materials Mounting: horizontal base Construction: compact pneumatic clamp Use: workholding, fixtures, automation Typical environments: production and workshop FAQ What clamping and holding forces does this clamp provide? The 611 pneumatic clamp delivers 750 N pneumatic clamping force and a 1,000 N maximum holding force; these values guide fixture design and safety margins. How is the clamp mounted in an assembly? Mounting is via the horizontal base; the 95° operating angle and compact footprint of the clamp allow straightforward integration into jigs and automation plates. Is the surface finish suitable for workshop environments? Yes, the zinc‑plated surface offers basic corrosion protection for general workshop and light industrial conditions, helping to extend service intervals. Which identifier should be used for ordering spare parts? Reference SKU 611-1-Q20 or GTIN 8680731502886 when ordering replacement units or checking stock. What maintenance is required for long service life? Periodic inspection of pneumatic connections, mounting fasteners and visible wear on contact surfaces is recommended to maintain reliable operation of the Kukamet clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com