Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
112mm Vertical Clamp 1,200N Pressing Force, Massive Holding Arm, Black Oxide Finish - Kukamet
Benefit from secure, compact workholding with a massive holding arm, a 112 mm span and up to 1,400 N holding force for reliable fixture performance. Order the vertical clamp via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 212 – Kukamet vertical clamp with 112 mm arm and 1,400 N holding force The Vertikalspanner 212 is a vertical clamp designed for compact, repeatable fixturing in assembly and light machining setups. Solid 112 mm holding arm Vertical foot mounting Holding force up to 1,400 N Compact 228 g weight Secure clamping for consistent production results The clamp delivers a holding force of 1,400 N and a pressing force of 1,200 N, providing stable fixation for small to medium workpieces during repetitive operations. The massive holding arm reduces deflection under load, which translates into fewer repositioning steps and less rework. By converting force ratings into practical outcome, this fixturing element supports higher throughput and predictable process quality in jigs, fixtures and assembly lines. Space-saving mounting that fits workshop grids and plates Featuring a vertical foot mounting, the device is optimised for direct installation on fixture plates or bench tops where vertical actuation is required. The 112 mm arm reach balances accessibility and compactness, while the 228 g mass keeps the component lightweight for modular fixture designs. The blackened surface finish allows integration into existing toolrooms without visual contrast, and the overall footprint suits dense fixture layouts where every millimetre counts. Durable finish and robust construction for long service intervals Constructed with a blackened finish and a reinforced arm, the clamp is engineered for repetitive use in industrial environments. The hardened arm geometry improves resistance to wear and minimises play over many clamping cycles, supporting consistent clamping forces over time. Intended for use in assembly, holding during light machining and repeatable fixture operations, this component combines compact design with industrial-grade endurance to help maintain stable production quality. Secure workshop fixturing with Kukamet reliability — contact Metav Werkzeuge for product details and supply from Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B212-2-D-C2 GTIN: 8682843522271 Manufacturer: Kukamet Facts Arm: 112 mm Weight: 0.228 kg Holding force: 1,400 N Pressing force: 1,200 N eClass: 21041717 ETIM: EC011973 Special features Material / finish: blackened finish Mounting: vertical foot Massive holding arm Category: Spanner FAQ What maximum clamping forces does the Vertikalspanner 212 provide? The Vertikalspanner 212 offers a holding force of up to 1,400 N and a pressing force of 1,200 N for secure fixturing in repetitive processes. How is the clamp mounted in a fixture? Mounting is via a vertical foot, making the clamp suitable for direct installation on fixture plates and bench tops where vertical actuation is required. What is the effective reach of the clamping arm? The device has an arm length of 112 mm, providing a balance between reach and compact fixture integration for dense layouts. Is the finish suitable for workshop environments? The Vertikalspanner 212 features a blackened finish that helps resist surface wear and reduces glare in production settings. Which applications suit this clamp best? Designed for assembly, jigs and light machining fixtures, the clamp is intended for repeatable workholding tasks where compact size and consistent clamping force are important. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp 1200N Closing Force, Heavy-Duty Arm & Safety Lock, Zinc-Plated - Kukamet
Robust zinc-plated construction, a massive holding arm and an integrated safety lock deliver dependable clamping with up to 1,200 N of clamping force and 1,400 N holding force — ideal for repetitive fixture tasks. Order the Vertical clamp 212 directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 212 — Vertical clamp with solid arm and safety lock (Kukamet) The Vertical clamp 212 is a compact vertical clamping device for jigs and fixtures, designed to secure workpieces reliably on presses, test rigs and assembly stations. Zinc-plated corrosion resistance Massive holding arm with safety lock 1,200 N clamping force, 1,400 N holding force Vertical-foot mounting for secure installation Reliable clamping performance for consistent production The clamp offers a defined clamping force of 1,200 N and a holding force of 1,400 N, values that translate into repeatable, measurable securing of components during machining or assembly. Stated in newtons, these figures indicate the axial force applied and the maximum static retention; they support process stability and reduce rework rates. For workshop planners and production engineers, the clear numeric specification simplifies integration into jigs and fixtures and helps in selecting the correct clamp for cycle times and component sizes. The compact design supports dense fixture layouts without sacrificing repeatability. Durable construction and simple integration reduce downtime Constructed from zinc-plated steel with a massive holding arm, the device resists corrosion in humid workshop environments while offering mechanical robustness for frequent actuation. The built-in safety lock prevents unintended release during set-up and inspection, improving operator safety and process reliability. The vertical foot mounting makes positioning straightforward on plates or tooling blocks; standard fixing holes accommodate common workshop practice. These attributes minimise maintenance interventions and support continuous operation in small-series and high-mix production. Practical application scenarios and ergonomic benefits This compact clamp suits workshop benches, assembly fixtures and testing rigs where space is limited but secure holding is essential. The low mass (approx. 0.21 kg) combined with a 112 mm arm length supports lightweight jigs and rapid reconfiguration, making it a pragmatic choice for toolrooms and contract manufacturers. The clamp’s tactile lever action gives a confident, audible engagement that reduces operator uncertainty and supports faster cycle handling. As a reliable element within a fixture assembly, it contributes to predictable throughput and improved operator experience. Contact Metav Werkzeuge for ordering details and specification advice on the Kukamet Vertical clamp 212, supplied directly from Emmerich and ready for rapid dispatch. Technical data Article number: 212-2-D-L-C2 GTIN: 8680731501551 Manufacturer: Kukamet SKU: 212 ECLASS: 21041717 ETIM: EC011973 Facts Weight: 0.21 kg Arm length: 112 mm Maximum clamping force: 1,200 N Maximum holding force: 1,400 N Mounting: vertical foot Special features Material: zinc-plated steel Massive holding arm Safety lock mechanism Vertical-foot attachment Compact, lightweight design FAQ What is the maximum clamping force of this clamp? The Vertical clamp 212 delivers a maximum clamping force of 1,200 N and a holding force of 1,400 N, suitable for secure fixation in many jig and fixture applications. Can the clamp be installed on a customer fixture plate? Yes; the clamp is designed for vertical-foot mounting and can be fastened to standard fixture plates or tooling blocks used in assembly and testing. What material is used for the clamp finish and why does it matter? The device is zinc-plated, which provides corrosion resistance and extended service life in workshop environments where humidity or coolant exposure may occur. Is the clamp suitable for repetitive production cycles? The combination of a massive holding arm and a safety lock makes this clamp well suited to repetitive cycles, offering consistent engagement and reduced risk of unintended release. Which manufacturer and model should be quoted for orders or technical enquiries? Refer to Kukamet Vertical clamp 212, SKU 212-2-D-L-C2, for ordering and specification sheets. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp 1200N Thrust, Massive Holding Arm With Safety Lock, Zinc Plated - Kukamet
Take advantage of a compact, corrosion‑resistant clamp that combines a 1,400 N holding force with a massive holding arm and safety lock for secure, repeatable workholding; order directly via Metav Werkzeuge or ask our consultants for application advice. Vertical clamp 211 by Kukamet — galvanised lever clamp with safety lock The Vertical clamp 211 is a compact galvanised lever clamp intended for light industrial and workshop fixtures, providing reliable vertical clamping where space is limited and repeatability matters. Galvanised steel for corrosion resistance Max holding force 1,400 N Compact 112 mm arm length Massive arm with safety lock Secure clamping that fits tight spaces The galvanised construction and robust design deliver consistent clamping with corrosion resistance that suits damp or mixed‑use workshop environments. With a max holding force of 1,400 N and a max pressing force of 1,200 N, the unit secures parts reliably during machining, assembly or testing operations. The horizontal foot mounting enables direct fixture attachment to benches or jigs, while the massive holding arm and integrated safety lock reduce the risk of accidental release and provide a safer production flow. This combination supports productivity gains through fewer re‑set operations and less downtime. Faster set‑up and repeatable results for production runs The lever mechanism and compact arm length of 112 mm allow quick engagement and disengagement, reducing cycle time for repetitive tasks. Designed as a lever clamp, the device gives predictable clamping behaviour and helps maintain positional accuracy across batches. The repeatability advantage is particularly relevant for short runs and fixtures where consistent force application saves time in adjustment and inspection. The visible, mechanical operation requires no consumables and supports straightforward maintenance routines, contributing to operational efficiency. Lightweight, durable component for fixture integration Weighing only 0.235 kg, this clamp adds minimal mass to fixtures while offering long service life thanks to its galvanised finish. The small footprint and horizontal foot fixing make integration into custom jigs or standard tooling plates simple, enabling compact fixture design without compromising stability. The combination of lightweight construction and robust components ensures that the clamp performs reliably under continuous use, while the galvanised surface extends service life in corrosive atmospheres. Speak with Metav Werkzeuge in Emmerich for tailored application advice and a competitive quotation for the Kukamet vertical clamp 211 — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 211-2-D-L-C2 GTIN: 8680731501186 Eclass: 21041717 ETIM: EC011973 Measurements & capacities Arm length: 112 mm Max holding force: 1,400 N Max pressing force: 1,200 N Weight: 0.235 kg Materials & features Material: galvanised steel Mounting: horizontal foot Massive holding arm Safety lock FAQ What is the maximum holding force of this clamp? The Kukamet vertical clamp 211 provides a maximum holding force of 1,400 N, suitable for secure clamping in light industrial and workshop fixtures. Can the clamp be mounted to a bench or jig? Yes, the clamp uses a horizontal foot mounting that permits direct attachment to benches, jigs or tooling plates for stable fixture integration. Is the finish suitable for humid workshop environments? The galvanised steel finish protects the clamp from corrosion, making it appropriate for workshops where moisture or mixed‑use conditions are present. How compact is the clamping arm for tight fixtures? The arm length is 112 mm, giving a compact footprint that works well in confined fixture layouts without sacrificing clamping performance. Does the unit include a safety mechanism to prevent accidental release? The clamp features a massive holding arm and an integrated safety lock to reduce the risk of unintended opening and enhance operator safety. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp With Horizontal Base, Massive Holding Arm, 1,200N Thrust / 1,400N Hold - Kukamet
Taking advantage of a massive holding arm, a compact 112 mm arm length and robust clamping capacities of 1,200 N clamping force and 1,400 N holding force, this vertical clamp ensures dependable fixture retention and repeatable setups. Order the device directly via Metav Werkzeuge or consult our specialists for application-specific advice. Vertikalspanner 211 — Vertical clamp with 112 mm arm and 1,400 N holding force (Kukamet) Vertikalspanner 211 is a compact vertical lever clamp designed for secure fixturing in production and workshop environments, offering a robust holding arm and horizontal-foot mounting for flexible installation. Solid holding arm for reliable clamping 112 mm arm length for compact fixtures Holding force 1,400 N, clamping force 1,200 N Horizontal-foot mounting for bench fixture Dependable clamping power for repeatable production The lever-style design delivers predictable clamping force and holding force, specified at 1,200 N and 1,400 N respectively, which translates into consistent workpiece retention during machining or assembly. A lever clamp converts operator motion into a secure lock, reducing setup variability; this predictable behaviour lowers the risk of slippage and the need for rework. The mechanical specification gives planners and shop floor teams an objective basis for selecting the right fixture components for repeatable processes. Compact mounting for flexible fixturing and space savings With a 112 mm arm and a horizontal-foot mounting, the unit integrates into tight fixture layouts while keeping the clamping axis clear of the work envelope. The short arm length supports space-conscious jigs and reduces interference with adjacent tooling. At 0.234 kg the component is lightweight, simplifying manual positioning during assembly and allowing multiple clamps to be deployed without substantial additional mass on the fixture. These characteristics support efficient cell design and fast changeovers in small-series and batch production. Robust execution and workshop-ready finish Constructed with a massive holding arm and a black burnished finish, the clamp combines tactile solidity with an industrial appearance that masks surface wear in daily use. The design emphasises mechanical reliability and straightforward maintenance, making it suitable for demanding clamping tasks where visual and functional durability matters. The product from Kukamet (SKU B211-2-D-C2) fits standard clamping roles in tooling and fixturing, offering a compact solution where a dependable vertical clamp is required. Discuss the Kukamet vertical clamp 211 with Metav Werkzeuge to match the clamp to the fixture requirements and secure reliable supply from our Emmerich location Technical data SKU: B211-2-D-C2 Model: 211 GTIN: 8680731507669 Brand: Kukamet Core figures Arm length: 112 mm Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.234 kg eClass: 21041717 ETIM: EC011973 Materials & features Material: black burnished finish Design: lever clamp Mounting: horizontal-foot Feature: massive holding arm FAQ What applications are suitable for this vertical clamp? The vertical clamp 211 is intended for fixture usage in machining, assembly and general workshop fixturing where compact, reliable vertical clamping is required; its lever design suits repeatable securing tasks. How do clamping force and holding force differ for this clamp? Clamping force (1,200 N) refers to the force applied to the workpiece during active clamping, while holding force (1,400 N) indicates the maximum retention capability; the 211 vertical clamp is specified for both values to aid fixture design. Can this clamp be mounted on custom plates or fixtures? Yes, the horizontal-foot mounting allows attachment to bench plates and custom fixtures; the compact 112 mm arm assists in tight layouts without impeding neighbouring tooling. Is the finish suitable for harsh workshop conditions? The black burnished finish provides an industrial, wear-masking surface appropriate for regular workshop use; the robust holding arm supports frequent handling and clamping operations. Which product identifier should be used when ordering or specifying the clamp? Use the SKU B211-2-D-C2 and the model designation 211 when specifying the Kukamet vertical clamp to guarantee the correct item is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp With Massive Holding Arm, 1,200N Push / 1,400N Hold, Galvanised - Kukamet
Take advantage of a compact, corrosion-resistant clamping solution that combines a massive holding arm with reliable clamping forces up to 1,400 N for repeatable workholding. Order the clamp via Metav Werkzeuge or consult our specialists for application advice. Kukamet Vertical toggle clamp 211 – Horizontal foot, massive holding arm The Vertical toggle clamp 211 is a zinc-plated lever clamp for secure workpiece holding in machining, assembly and fixturing, featuring a horizontal mounting foot and a robust 112 mm arm. Zinc-plated corrosion protection Robust, massiver holding arm Horizontal mounting foot for easy fixing Clamping force up to 1,400 N Dependable holding power for repeatable setups The clamp offers a measurable combination of clamping and pressing forces that supports consistent production processes. With a maximum holding force of 1,400 N and pressing capacity of 1,200 N, the device ensures components stay in place during machining or assembly, reducing rework and downtime. The lever mechanism converts operator input into secure fixture pressure, allowing faster cycle times and predictable results for batch work or single-piece manufacturing. Built for workshop conditions and long service life A zinc-plated finish provides corrosion resistance suitable for humid or mixed-environment workshops, extending service life without specialised maintenance. The robust holding arm minimises deformation under load, which supports dimensional stability of clamped parts over many cycles. These characteristics mean fewer interruptions for replacement and a lower total cost of ownership through dependable uptime. Compact mounting for flexible fixture design The horizontal mounting foot enables straightforward integration into benches, jigs or fixtures where a flat base is required. The 112 mm arm length balances reach and compactness, making the clamp suitable for confined setups while still clearing tooling and allowing safe access to the workpiece. The small mass (approx. 0.234 kg) keeps added inertia low, useful for automation or manual stations where weight on the fixture must be minimised. Fast implementation and clear specification The clamp’s simple lever action and clear mechanical parameters make specification and procurement straightforward for engineers and buyers. Supplied under a known SKU and GTIN, the component integrates into bills of materials and inventory systems without ambiguity. For customers new to clamping technology, the functional design and defined force ratings simplify decision-making and support consistent results across recurring jobs. Contact Metav Werkzeuge to discuss the Kukamet 211 for your application or to request a specification quote; call +49 2822 7131930 or email info@metav-werkzeuge.com and benefit from Metav’s precision know-how and European distribution. Technical data Article number: 211-2-D-C2 GTIN: 8680731501155 Manufacturer: Kukamet Facts Arm length: 112 mm Max pressing force: 1,200 N Max holding force: 1,400 N Weight: 0.234 kg ECLASS: 21041717 ETIM: EC011973 Special features Material: zinc-plated Mounting: horizontal foot Massive holding arm Lever-style (toggle) clamp Suitable for fixture and jig applications FAQ What materials is this clamp suitable for? The Kukamet Vertical toggle clamp 211 is designed as a general-purpose fixture clamp; its zinc-plated steel construction makes it suitable for typical metal and mixed-material workshop environments where a sturdy mechanical hold is required. How much clamping force does the clamp provide? This model delivers up to 1,400 N holding force and a pressing capacity of 1,200 N, providing a reliable benchmark for securing parts during machining or assembly. Can the clamp be mounted on machine tables or jigs? Yes, the horizontal mounting foot allows the clamp to be fixed to jigs, benches or machine tables, enabling easy integration into bespoke fixtures or standard workstations. Is the arm length suitable for tight spaces? With a 112 mm arm, the clamp balances reach and compactness, making it appropriate for confined setups while maintaining sufficient clearance for tooling and handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp With Solid Holding Arm And Safety Locking, 1400N Holding Force - Kukamet
Robust vertical clamping with a solid holding arm and integrated safety lock provides reliable workholding for compact fixtures; the 112 mm arm and blued finish ensure durable, repeatable performance. Order the Kukamet 212 Vertical Clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 212 Vertical Clamp — 112 mm arm, safety lock The Kukamet 212 Vertical Clamp is a compact vertical-foot clamp designed for stable, repeatable clamping in assembly and light machining fixtures. Vertical foot for stable mounting Massive holding arm for secure grip Safety locking mechanism included 112 mm arm reach, compact design Consistent force for repeatable setups The clamp delivers dependable holding capacity with a clear specification for both pressing and clamping operations. With a maximum holding force of 1400 N and a maximum pressing force of 1200 N, the device is suited to repetitive production tasks where process stability matters. The compact construction combined with a 112 mm arm length allows a short reach while maintaining effective force transmission, which reduces cycle variability and supports predictable fixture behaviour in small- to medium-batch manufacture. Built for secure, safe operation Safety and longevity are prioritised through a solid holding arm and an integrated safety lock, which prevents unintentional release under load. The bolted vertical-foot mounting ensures a rigid interface to the clamping plate or jig, enabling secure, vibration-resistant positioning during light machining or assembly. The blued finish protects contact surfaces against corrosion while maintaining a straightforward aesthetic that signals workshop-grade durability. Easy integration and low-maintenance performance The compact form factor and vertical mounting style make the component straightforward to incorporate into existing jigs and fixtures without major redesign. At just 0.21 kg, the unit is lightweight yet sturdy, reducing added mass on moveable fixtures. The mechanism is designed for straightforward upkeep: periodic inspection and cleaning of the pivot and lock are sufficient to retain clamping accuracy, helping to keep downtime and servicing effort to a minimum. Where this clamp performs best This vertical clamp is particularly effective in production and repair benches where secure, repeatable clamping of workpieces is required in constrained spaces. The combination of a massive holding arm and a reliable lock makes it suitable for fixture plates, assembly rigs and other areas where quick, positive clamping is needed without sacrificing safety. The clear force ratings support selection and verification in quality-controlled environments, enabling planners to match clamping capacity to the task at hand. For secure, compact workholding solutions, request a specification sheet or a tailored quote from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for fast technical advice and reliable supply. Technical data Article number: B212-2-D-L-C2 ETIM: EC011973 ECLASS: 21041717 Manufacturer: Kukamet Numbers Arm length: 112 mm Weight: 0.21 kg Max. clamping force: 1400 N Max. pressing force: 1200 N Special features Mounting: vertical foot Finish: blued (blackened) Massive holding arm Integrated safety lock Asset: product image and catalogue PDF available FAQ What forces can the clamp withstand during operation? The clamp provides a maximum holding force of 1400 N and a maximum pressing force of 1200 N, making the Kukamet 212 suitable for secure clamping in many assembly and light machining applications. Is the clamp suitable for welded or plated fixtures? Yes. The vertical-foot mounting of the Kukamet 212 is compatible with welded or plated fixture plates; secure bolting and correct torque values are recommended for reliable performance. How long is the arm and how much space does it require? The arm reach is 112 mm, offering a compact footprint that is well suited to constrained setups and smaller fixtures without compromising clamping effectiveness. What finish does the clamp have and how does it affect maintenance? The unit is supplied with a blued finish, which provides basic corrosion resistance and simplifies routine maintenance—regular cleaning and occasional lubrication of the pivot will ensure long service life. Can the clamp be used in production with frequent cycles? Yes, the robust construction with a massive holding arm and safety locking mechanism is designed for repetitive use; scheduled inspections will keep cycle reliability high. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp With Solid Holding Arm, 1.2kN Thrust, Galvanised - Kukamet
Take advantage of the combination of robust holding capability, corrosion-resistant construction and a compact mounting design for reliable jigs and fixtures; order directly through Metav Werkzeuge or consult our advisors for integration advice. Vertical clamp 212 by Kukamet — galvanised, solid holding arm The Vertical clamp 212 is a compact vertical lever clamp intended for fixed-position workholding in jigs and fixtures, combining a 112 mm arm with a high holding force for secure, repeatable clamping. Galvanised finish for corrosion resistance Solid 112 mm holding arm Up to 1,400 N holding force Vertical-foot mounting for stable attachment Robust clamping that keeps workpieces steady under load With a maximum holding force of 1,400 N and a pressing force of 1,200 N, this lever-style clamp delivers consistent pressure where retention and stability matter most. The mechanical advantage of the lever reduces operator effort while preserving clamping reliability; in practice this means fewer re-takes and less downtime during machining, assembly or inspection sequences. The precise force specification supports predictable fixture design and helps maintain process tolerances across repeated cycles. Workshop-ready construction for long service life The clamp is finished in galvanised steel and incorporates a solid holding arm, providing resistance to corrosion and mechanical wear in routine workshop environments. The robust construction translates directly into lower replacement rates and reduced maintenance intervals. For production environments where exposure to coolant, humidity or general handling is routine, the treated surface and sturdy arm help secure consistent performance over time. Compact form factor for efficient fixture layouts A 112 mm arm and vertical-foot mounting allow the clamp to be integrated into confined fixture spaces without sacrificing leverage or stability. The lightweight construction (0.228 kg) minimises added mass on moving fixtures and makes positioning within multi-clamp arrangements straightforward. This compact footprint supports denser clamping patterns on pallets and jigs, enabling efficient use of table space and simplifying toolpath planning for automated operations. Simple mechanism for dependable, low-maintenance operation The lever clamp design relies on a tried-and-tested mechanical principle that is easy to install and maintain. Few wear parts and a straightforward geometry mean inspections and replacements are quick, supporting continuous production demands. As a practical workholding component, the clamp offers dependable repeatability and integrates cleanly into both manual and semi-automated setups, making it a pragmatic choice for workshops seeking durable, no-fuss clamps for everyday use. For corrosion-resistant, workshop-ready clamping from Kukamet, contact Metav Werkzeuge to discuss fixture integration or request the technical datasheet — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 212-2-D-C2 GTIN: 8680731501520 Brand: Kukamet Key figures Weight: 0.228 kg Arm length: 112 mm Holding force: 1,400 N Pressing force: 1,200 N eCl@ss: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting: vertical foot Solid holding arm Massiver Haltearm (solid holding-arm design) FAQ What holding force does the Vertical clamp 212 provide? The Vertical clamp 212 offers a maximum holding force of 1,400 N and a pressing force of 1,200 N for secure retention. Is the clamp suitable for use in humid or coolant-exposed environments? The galvanised finish on the Kukamet clamp provides corrosion resistance suitable for typical workshop and coolant-exposed conditions. How is the clamp mounted in a fixture? The clamp uses a vertical-foot mounting to secure it to plates or fixture bases, allowing stable attachment in confined spaces. What is the arm length and how does it affect fixture design? The arm length is 112 mm; this compact reach supports dense clamping arrangements and simplifies positioning within jigs. Which SKU should be referenced when ordering replacement units? Reference SKU 212-2-D-C2 for this Vertical clamp 212 from Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
114mm Extension Lever Metal Lever Clamp Accessory - Kukamet
Take advantage of a compact, metal design and precise dimensions to extend clamping reach without adding unnecessary bulk; the combination of a 114 mm height, metal construction and low weight supports efficient, repeatable clamping operations. Order the extension lever directly via Metav Werkzeuge or consult our advisors for compatibility details. Extension lever 220 – compact metal accessory for lever clamps (Kukamet) Extension lever 220 offers a practical reach extension for lever clamp setups, designed for mechanical workshops and industrial fixtures. *Compact 114 mm extension lever *Robust metal construction *Lightweight at 0.15 kg *Compatible with lever clamps Extend reach while preserving balance and control The extension lever provides a measured increase in reach without compromising handling or balance. With a height of 114 mm, a width of 18 mm and a thickness of 10 mm, the geometry is tuned for predictable leverage and stable engagement in clamping systems. The moderate mass (0.15 kg) keeps dynamic loads low, which reduces the risk of unwanted movement during cycle changes and contributes to consistent clamping performance. This precise dimensional profile supports quick integration into existing fixturing where space and repeatability matter. Straightforward compatibility with lever-clamp assemblies Designed specifically for lever-clamp applications, the component fits into common clamping arrangements used in jigs and fixtures. The simple profile and metal construction ensure mechanical compatibility with standard lever spanners while enabling secure fastening and reliable force transmission. Clear numeric specifications allow engineers to verify fitment in CAD or shop drawings before installation, supporting efficient procurement and a short validation phase for production or repair tasks. Durable construction for dependable workshop service Made from solid metal, the extension accessory delivers a robust service life under typical workshop conditions. The straightforward design minimises failure modes and simplifies routine inspection, which helps to reduce downtime and maintenance intervals. Supplied by Kukamet and distributed through Metav’s European quality channel, the part benefits from a consistent quality check to match industrial expectations. The result is a pragmatic, cost-effective component that supports continuous operation in small-batch or high-mix manufacturing environments. Contact Metav Werkzeuge for availability and tailored advice on the Kukamet extension lever 220; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast support and stock information Technical data Article number: 220-6-06 GTIN: 4061905079528 Manufacturer: Kukamet eClass: 21170613 Facts Width: 18 mm Thickness: 10 mm Height: 114 mm Weight: 0.15 kg Special features Material: Metal Category: Spanner Application: for lever clamps FAQ What is the primary purpose of the extension lever? The extension lever is intended to extend the effective reach of lever-clamp assemblies, enabling secure clamping in setups where additional clearance is required. Which materials is the part made from and how does that affect durability? The component is made from metal; this solid construction provides predictable stiffness and wear resistance suitable for repetitive workshop use. Can the extension accessory be used with different lever clamp models? Compatibility depends on clamp geometry; the extension lever's dimensions (114 mm height, 18 mm width, 10 mm thickness) allow assessment against various lever-clamp designs before selection. What identifies the correct SKU for ordering? Order using SKU 220-6-06; this reference matches the Kukamet extension lever described in the technical data. Is the piece suitable for repetitive industrial cycles? Yes, the simple metal design and precise dimensions make it well suited for repeated clamping cycles in production and assembly applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
116mm Horizontal Clamp Massive Holding Arm, 90° Angle, Zinc Plated - Kukamet
Take advantage of the robust combination of a solid holding arm and a vertical-foot mounting for dependable clamping in repetitive production tasks; the compact 116 mm reach and galvanised finish support long service life and tidy workshop integration. Order through Metav Werkzeuge for fast procurement or request product advice from the Metav team. 112 Horizontal toggle clamp by Kukamet — 116 mm arm, galvanised The 112 is a horizontal toggle clamp designed for secure fixturing on benches and jigs, offering a vertical‑foot mounting for stable installation in industrial and workshop environments. Galvanised steel construction 116 mm solid holding arm Vertical-foot mounting Max holding force 1,200 N Consistent clamping that reduces rework and cycle time The horizontal toggle design delivers a repeatable clamping action that keeps components steady during machining, assembly or inspection. With a holding force of 1,200 N and a pressing force of 1,000 N, the clamp reduces movement and vibration that can cause rejects. The mechanical toggle locks in place, so setups remain consistent across cycles, improving throughput and lowering the likelihood of costly rework. The force values are expressed in newtons to allow easy comparison with other industrial fixtures and to support engineering decisions. Workshop‑grade materials for longevity and low maintenance Constructed from galvanised steel and equipped with a massive holding arm, this clamp is built for daily use in demanding environments. The 116 mm arm length provides practical reach without excessive overhang, while the compact body and a 90° arm orientation keep the footprint small on a jig or bench. Galvanisation protects the metal against corrosion in typical workshop atmospheres, reducing the need for frequent replacement and supporting a stable maintenance schedule. Fast installation and predictable operation for fixture builders The vertical‑foot fastening simplifies alignment on upright plates or bench surfaces and accelerates installation during fixture build‑up. The compact, lightweight construction (approx. 0.228 kg) makes handling straightforward when mounting multiple clamps across a jig. The mechanical behaviour of the toggle mechanism is intuitive for operators and enables quick manual actuation, supporting shorter setup times and more predictable cycle planning in small and medium production runs. Choose the Kukamet 112 for reliable, workshop‑grade clamping and contact Metav Werkzeuge in Emmerich for procurement and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Product details SKU: 112-2-D-C2 GTIN: 8680731500424 ETIM: EC011973 ECLASS: 21041719 Numbers / Core technical data Arm length: 116 mm Angle: 90° Weight: 0.228 kg Max pressing force: 1,000 N Max holding force: 1,200 N Designs / Special features Material: galvanised steel Mounting: vertical foot Feature: massive holding arm Category: horizontal toggle clamp Asset: 112-D-katalogseite.pdf FAQ What clamping and holding forces does the clamp provide? The Kukamet 112 provides a pressing force of 1,000 N and a holding force of 1,200 N, values given in newtons for straightforward engineering comparison. How is the clamp fastened to a fixture or bench? The clamp uses a vertical‑foot mounting arrangement that allows secure attachment to upright plates or horizontal bench tops, making alignment and installation simpler for modular jigs. What is the reach of the holding arm and how compact is the unit? The holding arm has a reach of 116 mm and the complete unit weighs approximately 0.228 kg, offering a compact solution for multi‑point fixturing. What material is the clamp made from and how does that affect durability? Constructed from galvanised steel with a massive holding arm, the 112 is designed for workshop durability and increased resistance to corrosion in standard industrial atmospheres. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
117mm Pneumatic Clamp With Solid Holding Arm, 95° Angle, 2 000 N Stroke Force - Kukamet
Benefit from a robust combination of high holding force and durable construction: the heavy-duty galvanised arm delivers dependable clamping at up to 2,500 N, while the compact 117 mm reach keeps fixtures compact and accessible. Order the unit directly via Metav Werkzeuge or consult our specialists for application-specific advice. Kukamet 611 Pneumatic Clamp — 117 mm arm, galvanised A Kukamet 611 pneumatic clamp engineered for horizontal-base mounting to provide secure, repeatable clamping in jigs and production fixtures. *Massive holding arm for robust clamping *117 mm reach for medium assemblies *Galvanised finish for corrosion resistance *Horizontal base for fixed workbench mounting Reliable clamping performance for repetitive production The clamp is built to deliver consistent force: with a rated 2,000 N actuation force and a maximum 2,500 N holding capacity, the device secures components reliably during machining and assembly. The difference between actuation and holding forces is explained by the pneumatic drive mechanism and the mechanical locking of the arm; this combination translates pneumatic input into steady static grip. Such figures make the component suitable for medium-duty industrial applications where repeatability and process security matter most, reducing cycle variation and downtime. Robust construction that stands up to workshop conditions A galvanised finish provides corrosion protection across common workshop environments, extending service life without specialist coatings. The unit features a massive holding arm designed for heavy contact loads and long-term durability; that mass helps resist deformation under repeated stress. These attributes reduce maintenance intervals and support predictable replacement planning, so fixtures remain dimensionally stable and safe over many production cycles. Compact footprint and straightforward integration into fixtures Designed with a horizontal base for fixed mounting, the clamp fits neatly into bench-mounted jigs and modular tooling systems. The 117 mm arm length and the 95° arm angle allow compact layout design while keeping the clamping action accessible to operators and automation end-of-arm tooling. The model's form factor simplifies CAD integration and reduces the need for bespoke adaptors, speeding up fixture assembly and enabling quicker changeovers between part runs. Practical advantages that justify the investment Choosing this pneumatic clamping solution supports operational efficiency: faster workpiece securing means reduced cycle times, and the sturdy construction lowers the likelihood of unplanned stoppages. Metav’s distribution model guarantees consistent availability and quality control from Emmerich, backed by industry experience and a wide product range that simplifies procurement. Together, these factors preserve production throughput and support long-term cost-effectiveness. Contact Metav Werkzeuge for tailored technical advice, availability and ordering options for the Kukamet 611 pneumatic clamp; speak with our Emmerich-based specialists for fast, practical support Technical Data SKU: 611-3-D-C2 GTIN: 8682843521588 ETIM: EC011973 Facts Arm length: 117 mm Angle: 95° Actuation force: 2,000 N Holding force: 2,500 N Special features Material: galvanised Massive holding arm Mounting: horizontal base Type: pneumatic clamp Brand: Kukamet FAQ What mounting arrangement is required for this clamp? The Kukamet 611 pneumatic clamp is supplied for horizontal-base mounting, allowing fixed installation on workbenches and fixtures. What are the clamping and holding forces of the unit? The unit provides an actuation force of 2,000 N and a maximum holding capacity of 2,500 N for reliable workpiece retention. Is the clamp suitable for corrosive or humid environments? The galvanised finish on the Kukamet 611 offers enhanced corrosion resistance, making it suitable for standard workshop and production conditions. What reach does the clamp arm provide for fixture design? The clamp features a 117 mm arm reach, appropriate for medium-sized assemblies and compact jig layouts. Does the design support high-repeatability applications? Yes, the combination of pneumatic actuation and a massive holding arm ensures repeatable clamping performance suitable for series production. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
117mm Vertical Clamp 2,000N Closing Force, Massive Holding Arm, Galvanised - Kukamet
The combination of a massive holding arm, compact 117 mm reach and up to 2,500 N clamping force ensures secure, repeatable fixation for light-duty fixtures; order the Kukamet vertical clamp directly via Metav Werkzeuge or consult our specialists for specification advice. Vertical clamp 212 — Kukamet (vertical toggle clamp with galvanised finish) A vertical clamp 212 designed for secure bench mounting and repeatable clamping tasks in production jigs, assembly and light machining applications Massive holding arm for stable clamping Vertical base for secure bench mounting Up to 2,500 N clamping force Galvanised finish for corrosion resistance Reliable fixation for repeatable jigs and fixtures The vertical clamp 212 delivers consistent holding power where repeatability matters. With a maximum clamping force of 2,500 N and a specified pressing force of 2,000 N, the device holds workpieces firmly during short-cycle operations and fixture setups. The 117 mm arm provides an extended reach that assists in positioning and clearance, while the lever action simplifies toggle engagement. These measurable values allow planners to include the clamp in process documentation and to design jig geometry around predictable forces. Durable construction that minimises maintenance Constructed with a galvanised finish and featuring a heavy-duty holding arm, the clamp is engineered for long service life in workshop environments. Corrosion resistance from the surface treatment reduces the need for regular refurbishment, while the compact mass of 0.408 kg makes retrofitting into existing jigs straightforward and cost-effective. The robust mechanical design reduces unplanned downtime and supports a higher mean time between replacements, contributing to steady production runs and predictable maintenance planning. Compact mounting and flexible installation for production lines Fitted with a vertical base intended for secure bench mounting, this lever clamp integrates easily into small fixtures and modular tooling. The vertical mounting orientation saves bench space and facilitates stacking of clamps in tight assemblies. The unit’s modest footprint and clear mechanical specification make it suitable for repeated applications in assembly, testing and light machining contexts where reliable clamping and quick engagement are required. For system designers, the compact geometry aids in collision avoidance and repeatable part handling. For tailored advice on integrating the Kukamet vertical clamp 212 into production jigs or to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt specification support and delivery options. Technical data SKU: 212-3-D-C2 GTIN: 8680731501605 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Weight: 0.408 kg Facts Clamping force max: 2,500 N Pressing force max: 2,000 N Arm length: 117 mm Special features Material: Galvanised Mounting: Vertical base Heavy-duty holding arm Category: Clamp FAQ What maximum holding force does the clamp provide? The Kukamet vertical clamp 212 offers a maximum clamping force of 2,500 N and a pressing force of 2,000 N, providing a clear basis for fixture design and load calculation. How is the clamp mounted in a jig or on a bench? Mounting is via a vertical base intended for secure bench installation; the clamp’s compact footprint and vertical orientation ease integration into modular fixtures. Is the surface treatment suitable for workshop environments? Yes, the unit is galvanised, which provides corrosion resistance suitable for standard workshop conditions and reduces maintenance needs. What is the arm reach and how does it affect positioning? The clamp features a 117 mm arm length, offering additional reach for positioning and clearance in assembly jigs while maintaining reliable lever action. Which SKU should be referenced when ordering or specifying this clamp? Reference SKU 212-3-D-C2 (Kukamet vertical clamp 212) when ordering or including the component in technical documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
117mm Vertical Clamp 2000N Closing Force, Massive Holding Arm & Safety Lock, Zinc Plated - Kukamet
Take advantage of a robust, zinc‑plated design with a 2,000 N clamping force and a massive holding arm with safety lock to secure workpieces reliably; order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Vertical Toggle Clamp 212 by Kukamet — 2,000 N clamping force, zinc‑plated A robust Vertical Toggle Clamp 212 for secure vertical holding in jigs, fixtures and production tooling. Heavy‑duty holding arm with safety lock 2,000 N clamping force Zinc‑plated corrosion resistance 117 mm lever arm for extended reach Secure clamping that reduces rework and cycle time The clamp delivers a 2,000 N clamping force and a 2,500 N holding force, providing reliable retention during machining, assembly and testing operations. Clamping force refers to the applied pressure that brings a workpiece into position, while holding force describes the resistance to displacement once clamped; the difference ensures stable fixation without overloading the fixture. This combination minimises slippage and reduces the need for repeated adjustments, contributing directly to improved process efficiency and fewer rejects. Built for durability and operator safety Constructed with a zinc‑plated finish, the device resists corrosion in standard workshop conditions, extending service life and lowering replacement cycles. The massive holding arm increases structural stiffness, and the integrated safety locking mechanism prevents accidental release during handling or vibration. These attributes support safer, continuous operation and simplify maintenance schedules, since visible wear points are reduced and routine checks become straightforward. Easy integration into existing fixtures and tooling Designed with a vertical foot mounting, the clamp installs neatly into plates and modular tooling systems, while the 117 mm lever arm gives additional reach where clearance is limited. At roughly 0.37 kg, the unit balances rigidity with minimal added mass, allowing rapid retrofitting without affecting handling or alignment. The compact footprint facilitates dense placement in multi‑station fixtures, helping to streamline setup times and keep cycle layouts compact. Practical choice for light to medium industrial applications This lever‑style vertical clamp is suited to repetitive clamping tasks in jigs, assembly benches and test fixtures where consistent positioning is essential. The combination of corrosion protection, a robust arm and a positive locking feature makes it appropriate for workshop and production environments that prioritise repeatability and uptime. For bespoke fixture designs, the clamp’s straightforward geometry enables predictable behaviour when paired with standard base plates and locating features. Contact Metav Werkzeuge to specify the Kukamet Vertical Toggle Clamp 212 for fixture projects and receive tailored technical guidance and procurement support Technical Data Article number: 212-3-D-L-C2 GTIN: 8680731501636 ECLASS: 21041717 ETIM: EC011973 Facts Clamping force (max): 2,000 N Holding force (max): 2,500 N Lever arm length: 117 mm Weight: 0.37 kg Special features Material: zinc‑plated Mounting: vertical foot Massive holding arm Safety locking mechanism FAQ How much clamping force does the clamp provide? The Vertical Toggle Clamp 212 provides a maximum clamping force of 2,000 N and a holding force of up to 2,500 N for secure fixation. Is the clamp suitable for workshops with varying humidity? The zinc‑plated finish on the 212 gives corrosion resistance suitable for many workshop environments; for aggressive conditions, additional protective measures are advised. How is the clamp mounted in a fixture? The Kukamet Vertical Toggle Clamp 212 is fitted for vertical foot mounting and is intended to be fastened to base plates or fixture subplates. Does the clamp include any safety features? Yes, the clamp is supplied with a safety locking mechanism and a massive holding arm to reduce the risk of unintended release during operation. What are the lever length and weight for integration planning? The unit has a 117 mm lever arm and weighs 0.37 kg; refer to SKU 212-3-D-L-C2 when specifying dimensions for fixture layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
117mm Vertical Clamp 2000N Closing Force, Massive Holding Arm, Blackened Finish - Kukamet
Robust clamping with a 2,500 N holding force and a 117 mm solid arm delivers secure, repeatable fixtures for production and jig work; the compact weight of 0.413 kg eases integration into existing tooling. Order the Vertikalspanner 211 directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 211 — Vertical toggle clamp with 2,500 N holding force (Kukamet) Vertikalspanner 211 is a vertical toggle clamp engineered for dependable workholding in compact fixtures and production jigs, offering a horizontal foot for stable mounting and a massive holding arm for heavy-duty cycles. Massive holding arm for durability Horizontal foot for stable mounting 117 mm arm length for extended reach 2,500 N holding force for secure clamping Consistent clamping performance that protects cycle time The clamp delivers clear technical advantages for batch production: a maximum pressing force of 2,000 N combined with a maximum holding force of 2,500 N provides differentiated values for actuation and retention. The higher holding force means components remain reliably secured once the toggle is set, while the pressing value describes the force generated during the clamping stroke. This separation of values supports predictable process planning and reduces rework caused by shifting workpieces, improving throughput in repetitive operations. Robust construction for long service life and safe fixtures Built around a massive holding arm, the device is aimed at workshop and industrial environments where mechanical stress is frequent. The solid arm geometry increases resistance to bending and wear, resulting in stable, repeatable clamping over many cycles. The blackened finish protects contact surfaces and gives a professional appearance suitable for visible fixtures. At 0.413 kg, the unit remains compact and easy to position without compromising structural integrity. Compact mounting that fits existing jigs and tooling The horizontal-foot mounting enables direct attachment to flat plates and bench fixtures with a low profile, simplifying integration into existing assemblies. The 117 mm arm length offers an extended reach for clamping over workpieces while keeping the device footprint modest. Installation requires common fasteners and basic alignment; the toggle design ensures quick engagement and secure retention once set, which is particularly useful in modular fixtures and rapid-change tooling setups. Precision and repeatability for reliable production results Designed as a toggle clamp, the device converts lever motion into a firm hold with little variation between cycles, which supports consistent part positioning and repeatable downstream processes such as machining, welding or inspection. The combination of defined mechanical forces, a substantial arm and a stable mounting arrangement reduces the need for frequent readjustment and helps maintain process quality under continuous use. Request a tailored quotation or technical clarification for the Kukamet Vertikalspanner 211 from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, local advice and supply from Emmerich. Technical Data Article number: B211-3-D-C2 GTIN: 8680731507706 Manufacturer: Kukamet Facts Arm length: 117 mm Max pressing force: 2,000 N Max holding force: 2,500 N Weight: 0.413 kg ECLASS: 21041717 ETIM: EC011973 Special features Massive holding arm Horizontal foot mounting Blackened finish Toggle / lever clamp design Catalog page PDF available FAQ What is the maximum holding force of this clamp? The Vertikalspanner 211 (Kukamet) provides a maximum holding force of 2,500 N, specified for retention once the clamp is engaged. What does the pressing force value mean? The stated pressing force of 2,000 N refers to the force generated during actuation of the toggle mechanism; it differs from the holding force, which denotes the clamp's retention capability after engagement. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, allowing secure attachment to flat plates or bench fixtures for stable, low-profile installation. What materials and finishes are used? The unit is supplied with a blackened finish, providing a protective surface and a professional appearance suitable for workshop environments. What is the arm reach and how does that affect application? The arm length is 117 mm, offering extended reach for clamping over components while maintaining a compact overall footprint for integration into jigs. Which identifier should be used when ordering spare parts or replacements? Use the Article number / SKU B211-3-D-C2 and the GTIN 8680731507706 for ordering or reference. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
117mm Vertical Clamp With Massive Holding Arm, 2,000N Thrust / 2,500N Hold - Kukamet
Take advantage of the combination of a massive holding arm, compact 117 mm reach and a 2,500 N holding force for reliable, repeatable clamping in workshop and production environments; order the Kukamet Vertical Clamp 212 directly via Metav Werkzeuge or ask our consultants for suitability advice. Kukamet Vertical Clamp 212 – 117 mm arm, 2,500 N holding force The Vertical Clamp 212 is a robust lever-style clamping device for secure vertical fixation on benches and fixtures, designed to give stable positioning where space is limited. Massive holding arm for extra stability 117 mm reach for versatile clamping 2,500 N holding force for secure fixation Vertical foot for easy mounting on fixtures Secure clamping that fits compact workspaces The vertical clamp combines a massive holding arm with a compact footprint to deliver secure fixation without occupying excessive bench space. At just 0.408 kg, the device is lightweight for its class yet engineered to provide stable support during repetitive operations. The compact design suits jigs, assembly stations and small fixtures where reliable, repeatable clamping increases process throughput and reduces setup time. Precise force control for dependable fixation Designed with clear force ratings, the clamp offers an actuating force up to 2,000 N and a holding force up to 2,500 N, giving a predictable margin between applied and retained force. This distinction supports process planners in selecting the correct clamping solution for delicate assemblies or more rigid workpieces. The combination of defined force values and lever mechanics provides an efficient trade-off between operator effort and secure retention. Simple integration and industrial-grade detailing Mounting is straightforward via the vertical foot, enabling direct attachment to fixtures or bench plates. The lever-style concept (hebelspanner) allows rapid engagement and release, supporting quick cycle times on production lines. The component’s blackened finish gives a uniform appearance and matches typical industrial tooling aesthetics, while the overall construction focuses on durability and functional reliability in everyday workshop use. For direct procurement or to confirm whether the Kukamet Vertical Clamp 212 meets specific application requirements, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com — and secure supply from our local stock. Technical data Article number: B212-3-D-C2 GTIN: 8682843522301 Brand: Kukamet Core technical data Weight: 0.408 kg Arm length: 117 mm Holding force max: 2,500 N Actuating force max: 2,000 N Special features Massive holding arm Vertical foot mounting Material/finish: blackened finish Lever clamp design FAQ What applications is this clamp suitable for? The Kukamet Vertical Clamp 212 (SKU B212-3-D-C2) is intended for workshop and fixture applications where vertical clamping and fast engagement are required; its holding force and lever operation suit general production and assembly tasks. What is the effective reach of the clamping arm? The clamping arm provides a reach of 117 mm, enabling access to components in confined or tightly arranged setups. How much force does the clamp deliver and what does that mean in practice? The clamp offers an actuating force up to 2,000 N and a holding force up to 2,500 N, which ensures a clear safety margin between applied input and retained fixation during handling or machining operations. How is the clamp mounted? Mounting is by a vertical foot, designed for direct attachment to benches, plates or fixture bases to provide a stable, low-profile installation. What surface finish does the clamp have? This model features a blackened finish (Schwarz brüniert) that provides a consistent industrial appearance for toolrooms and production lines. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
117mm Vertical Clamp With Massive Holding Arm, 2,500N Hold Force, Galvanised - Kukamet
Take advantage of the combination of a solid holding arm, a galvanised corrosion-resistant finish and compact weight for dependable clamping in production jigs; order the Kukamet 211 directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Vertical Toggle Clamp 211 — compact clamping with a solid holding arm and horizontal base The 211 vertical toggle clamp is a compact, robust toggle clamp designed for secure fixturing where a horizontal base and repeatable clamping action are required. Horizontal base for secure mounting Solid holding arm for high stability Galvanised corrosion-resistant finish Max clamping force 2,500 N Reliable clamping that fits tight workflows The 211 delivers a combination of compact dimensions and measurable performance: max clamping force 2,500 N and max pressing force 2,000 N in a package weighing 0.413 kg. The 117 mm reach of the arm allows secure engagement without excessive overhang, while the galvanised finish protects the mechanism against corrosion in standard workshop environments. These measurable values make planning straightforward: fixture loads and actuator requirements can be calculated from the published forces, reducing guesswork during design and assembly. The robust construction supports continuous use in production jigs and small-series manufacturing. Designed for repeatable fixtures and fast throughput A vertical toggle clamp converts lever movement into a secure holding action, offering fast single-handed operation and positive locking under load. The horizontal base simplifies mounting to plates and tooling blocks, enabling consistent positioning across repeat setups. The solid holding arm minimises deflection, which improves part repeatability and reduces rework. As a toggle-style device, the clamp locks mechanically in the closed position, so it resists vibration and maintains contact force without ongoing adjustment. This makes it suitable for assembly, inspection and light machining fixtures where consistent clamping improves cycle times and quality. Low-maintenance durability and integration in production Built from galvanised components, the clamp requires minimal upkeep and resists surface corrosion, which extends service life in typical workshop conditions. The compact mass and simple mounting mean retrofitting into existing tooling is straightforward; standard fastening practices are sufficient for secure installation. For procurement and quality assurance, Metav’s position as a European supply base functions as a practical filter: parts supplied through Metav Werkzeuge are checked for consistency and accessibility across the European market. The clamp’s clear specifications support predictable stocking, while its mechanical simplicity reduces long-term maintenance costs compared with more complex clamping systems. Contact Metav Werkzeuge for tailored application advice and specify the Kukamet 211 vertical toggle clamp to secure fixtures with its solid holding arm and up to 2,500 N holding force Technical data SKU: 211-3-D-C2 GTIN: 8680731501230 Manufacturer: Kukamet Category: Clamp eClass: 21041717 ETIM: EC011973 Facts Arm length: 117 mm Max holding force: 2,500 N Max pressing force: 2,000 N Weight: 0.413 kg Special features Material: galvanised Mounting: horizontal base Massive holding arm Toggle clamp design FAQ What maximum clamping force does the clamp deliver? The clamp provides a maximum holding force of 2,500 N; this value is the primary reference for fixture design when using the Kukamet 211. How is the clamp mounted to tooling plates? Mounting is via a horizontal base, allowing straightforward fastening to plates or tooling blocks for repeatable positioning with the Kukamet 211. Is the finish suitable for humid workshop conditions? Yes, the galvanised finish offers corrosion resistance appropriate for standard workshop environments and reduces the need for intensive maintenance. Can the clamp be used for welding fixtures and assemblies? The toggle design locks mechanically and resists vibration, making the clamp suitable for welding fixtures and assembly operations that require stable part retention. What is the reach of the holding arm? The arm reach is 117 mm, which is useful for determining engagement depth and ensuring the clamp interfaces correctly with the workpiece. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
118mm Horizontal Clamp With Massive Holding Arm, 90° Pivot, 2.3kN Press Force, 2.5kN Holding Force, Blackened - Kukamet
Take advantage of the robust heavy-duty holding arm, 2,300 N clamping force and compact footprint to secure jigs and fixtures reliably; order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal lever clamp 111 by Kukamet — heavy-duty horizontal clamp with 2,300 N clamping force The Horizontal lever clamp 111 is a lever-operated horizontal clamp designed for stable workpiece securing in fixtures and jigs, featuring a horizontal foot mount and a massive holding arm for repeatable right-angle clamping. Robust heavy-duty holding arm Horizontal foot mounting for stability 2,300 N maximum clamping force Compact 118 mm arm length Secure heavy-duty clamping at a defined 90° angle The clamp delivers a defined 90° clamping angle, combining a lever mechanism with a massive holding arm to produce consistent, reproducible results on repeated cycles. With a maximum clamping force of 2,300 N and a maximum holding force listed at 2,500 N, this device provides the force levels commonly required for metalworking fixtures and light assembly processes. The lever operation reduces set-up time and ensures an unmistakable locked position, which is especially useful where process stability and operator repeatability matter most. Low-profile mounting for compact fixtures and jigs Thanks to the horizontal foot mounting and a compact 118 mm arm, the clamp integrates easily into tight fixtures and multi-clamp setups. The low profile helps to keep adjacent tooling accessible while the relatively low mass (0.328 kg) minimises added load on movable subassemblies. These dimensional characteristics are advantageous for toolroom fixtures, production jigs and CNC workholding where space optimisation and ease of integration contribute directly to efficient part throughput. Workshop-ready finish and robust construction The component is finished in a blackened surface treatment that resists everyday workshop wear and reduces visible abrasion on frequently handled parts. The solid holding arm construction resists bending under cyclical load, increasing service life and lowering the risk of unexpected downtime. For applications requiring repeated engagement and release, the combination of solid mechanics and a protective finish ensures long-term reliability even in demanding industrial environments. Designed for repeatable setup and fast cycle times Lever-actuated clamps of this design are valued for quick manual actuation and obvious visual confirmation of the locked state, supporting faster cycle times during small-batch production or assembly operations. The clamp’s geometry and force ratings are suited to securing workpieces for machining, inspection or assembly at a fixed right angle, delivering a balance of simplicity and performance that reduces adjustment time and improves overall process consistency. For specification questions or fixture design advice, Metav Werkzeuge can provide targeted recommendations. Contact Metav Werkzeuge for fixture integration guidance and to source the Kukamet Horizontal lever clamp 111 directly for robust, repeatable clamping solutions. Technical data Article number: B111-3-D-C2 GTIN: 8680731507003 Manufacturer: Kukamet Facts Arm length: 118 mm Clamping force max: 2,300 N Holding force max: 2,500 N Angle: 90° Weight: 0.328 kg Special features Horizontal foot mounting Massive holding arm Blackened finish Lever-operated horizontal clamp FAQ What clamping force can be expected from this clamp? The Kukamet Horizontal lever clamp 111 provides a maximum clamping force of 2,300 N, with a maximum holding force specified at 2,500 N, suitable for many light- to medium-duty fixture applications. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, allowing secure attachment to flat fixture plates or tooling blocks for stable right-angle clamping. Is the clamp suitable for integration in compact jigs? Yes, the compact 118 mm arm length and low profile make the clamp well suited for tight fixture layouts and multi-clamp arrangements. What finish does the clamp have for workshop durability? The device features a blackened finish, offering surface protection against wear and a workshop-appropriate, low-reflective appearance. Can this clamp be used for repeated cycle production? The solid construction and lever actuation are designed for repeatable engagement and release, making it appropriate for production jigs and repetitive assembly tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12,000N Pull Rod Clamp, 29,000N Hold Force, 20mm Piston Ø, Zinc Plated Cast Body - Kukamet
Take advantage of the combination of robust 12,000 N clamping force, a zinc‑plated cast body and a horizontal‑foot mounting for dependable, repeatable workholding in serial production and jigs. Order the push‑rod clamp directly via Metav Werkzeuge or ask the consultants for application advice. Push‑rod clamp 533 by Kukamet — horizontal foot, 12,000 N clamping force Push‑rod clamp 533 is a horizontal‑foot clamp designed for secure, repeatable workholding in machining, assembly and fixture applications. Horizontal-foot mounting for stable positioning Max clamping force 12,000 N Holding force up to 29,000 N Zinc-plated cast body for corrosion resistance Consistent clamping that keeps processes running The 533 push‑rod clamp delivers a clearly defined 12,000 N clamping force with a 29,000 N holding capacity, which supports stable fixturing under dynamic loads. The combination of a compact actuator and a 20 mm piston diameter produces predictable force transmission, making cycle‑to‑cycle repeatability straightforward to calculate for process planning. Where tight tolerances or frequent part changes are involved, the clamp’s clear performance figures enable reliable fixture design and reduced setup time through engineering‑led choices rather than trial and error. Designed for durability and quick integration on the shopfloor A zinc‑plated cast body provides resistance to workshop environments while keeping maintenance effort low. The horizontal‑foot mounting simplifies installation into existing fixtures or modular clamping plates, and the M10x70 pressure spindle ensures compatibility with common threaded components. With a compact mass of 1.61 kg, the unit is easy to handle during assembly yet robust enough for continuous use, offering a favourable balance between portability and structural integrity for small to medium‑scale production runs. Clear technical values that aid decision making Measured parameters such as clamping force, holding force and piston diameter translate directly into engineering decisions: clamp spacing, actuator count and cycle speed. The 533’s numeric specifications enable a rational evaluation of whether the component meets the required safety margins and throughput targets. For integrators and production engineers, these objective data points support efficient material planning and risk assessment, reducing downtime caused by under‑specified workholding. Contact Metav Werkzeuge for tailored application advice and to secure supply of the Kukamet Push‑rod clamp 533; the Metav team in Emmerich will assist with selection and delivery logistics Technical Data Article number: 533-5-Q20 GTIN: 8680731506136 Eclass: 21041716 ETIM: EC011973 Facts Max clamping force: 12,000 N Holding force: 29,000 N Piston diameter: 20 mm Pressure spindle: M10x70 Weight: 1.61 kg Special features Material: Zinc‑plated with cast body Mounting: Horizontal foot Category: Clamp (Spanner) SKU: 533-5-Q20 FAQ What tasks is this clamp best suited for? The Kukamet push‑rod clamp 533 is suited for machining, assembly and jig work where a horizontal mounting and defined clamping values are required; it is commonly used in fixtures for repeatable production tasks. How do the clamping and holding forces differ in practice? The clamp offers a 12,000 N clamping (actuating) force and a 29,000 N maximum holding capacity; the first figure describes applied force during actuation, the second the static retention the fixture can maintain under load. What mounting and connection details are required for installation? This horizontal‑foot model is designed for secure bolting to fixture plates; the unit uses an M10x70 pressure spindle and compact footprint to integrate with common clamping systems. Is the exterior treated to resist workshop wear? Yes, the push‑rod clamp 533 features a zinc‑plated finish on a cast body to enhance corrosion resistance and lengthen service life in workshop environments. Which numeric values are most important when designing a fixture with this clamp? Key values are the 12,000 N clamping force, 29,000 N holding force, 20 mm piston diameter and the pressure spindle specification (M10x70); these determine spacing, actuator count and safety margins Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Pneumatic Clamp Horizontal Base 95° Swing, Zinc-Plated, 1400 N Holding Force - Kukamet
Reliable, compact clamping with a 1,200 N pneumatic actuation and a zinc-plated finish delivers consistent holds and long service life, supporting steady production cycles and reduced setup times. Order the Pneumatic clamp 611 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 611 — Kukamet · 1.2 kN actuation · horizontal-foot mounting A Pneumatic clamp 611 designed for secure workpiece clamping in production and workshop settings, combining controlled pneumatic actuation with a corrosion-resistant finish and a compact horizontal-foot mount. Max. clamping force 1,200 N Holding force up to 1,400 N Zinc-plated corrosion resistance Horizontal-foot mounting, 95° angle Consistent actuation for predictable cycle times The pneumatic drive delivers a controlled actuation of 1,200 N, providing a repeatable closing movement that reduces variation between cycles and minimises manual adjustment. With a separate holding force of 1,400 N, the device secures parts reliably once clamped, which helps to prevent slippage during machining or assembly. The clear separation of actuation and holding values makes performance easy to specify for jigs and fixtures, supporting process planning and quality assurance in series production. Durable finish and compact installation save space A zinc-plated finish provides corrosion protection appropriate for workshop environments, while the low mass (approx. 0.535 kg) keeps the clamp compact and easy to integrate into fixtures. The horizontal-foot mounting with a 95° angle allows direct attachment to plates or subframes and supports low-profile installations where clearance is limited. These design choices reduce the need for additional brackets and simplify retrofits, lowering installation time and material handling effort. Seamless integration into clamping systems and fixtures Engineered for fixture-level use, the clamp is compatible with standard clamping arrangements and can be arranged in arrays for multi-station jigs. The compact pneumatic actuator allows straightforward connection to existing compressed-air supplies, enabling controlled operation without extensive electrical integration. Identification by SKU and GTIN supports inventory management and procurement tracking for production planners and purchasers seeking reproducible component sourcing. For tailored advice on integrating the Kukamet Pneumatic clamp 611 into workshop fixtures, contact Metav Werkzeuge for delivery from Emmerich and expert consultation at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: 611-2 GTIN: 8680731502893 Article designation: Pneumatic clamp / 611 Manufacturer: Kukamet Facts Max. actuation force: 1,200 N Max. holding force: 1,400 N Weight: 0.535 kg Angle: 95° Special features Zinc-plated finish Horizontal-foot mounting Mounting type: waagerechter Fuß Category: Clamps eCl@ss: 21021004 ETIM: EC011973 FAQ What clamping and holding forces does the clamp provide? The Kukamet Pneumatic clamp 611 offers a maximum actuation force of 1,200 N and a holding force of 1,400 N, values intended for reliable part retention in fixtures. How is the clamp mounted to a fixture? Mounting is via a horizontal foot (waagerechter Fuß); the clamp’s design and 95° angle suit low-profile attachment to plates and subframes. Is the surface finish suitable for workshop environments? The clamp features a zinc-plated finish, providing corrosion resistance suitable for typical production and workshop conditions. How compact is the device for multi-station fixtures? With a weight of approximately 0.535 kg and a compact actuator, the clamp is well suited for installation in arrays or confined fixture spaces. Can the clamp be integrated into existing pneumatic systems? Yes; the clamp’s pneumatic actuation is designed for straightforward connection to standard compressed-air supplies and can be incorporated into existing clamping circuits. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamp Stainless Steel Wafer Base Wafer-Type, 1400 N Holding Force - Kukamet
The combination of stainless steel construction, a 1,200 N clamping capacity and a compact horizontal base delivers reliable, corrosion-resistant workholding for jigs and fixtures; order the clamp directly via Metav Werkzeuge or consult the technical team for application advice. Vertikalspanner 211 — Vertical toggle clamp with stainless steel body and 1,200 N clamping force (Kukamet) The Vertikalspanner 211 is a compact vertical toggle clamp designed to secure workpieces in jigs, fixtures and assembly stations where a durable, low-profile hold is required. Stainless steel construction 1,200 N clamping force Horizontal base for secure mounting M6x40 pressure spindle Robust clamping that keeps production moving Built from stainless steel, this vertical toggle clamp provides a corrosion-resistant and wear-tolerant solution for repetitive clamping tasks. With a 1,200 N maximum clamping force and 1,400 N holding capacity, the unit secures components with consistent pressure, reducing repositioning and rework. The simple mechanical design translates into predictable performance during machining and assembly operations, supporting steady throughput and fewer interruptions. Space-saving mounting for tight fixtures The horizontal base allows direct bench or fixture mounting where vertical clearance is limited, enabling flexible placement in confined jigs. Weighing just 0.23 kg and equipped with an M6x40 pressure spindle, the clamp is suitable for compact tooling layouts and keeps added mass to a minimum, which benefits moving assemblies and reduces inertial load on automated stations. The standard M6 spindle also simplifies integration with existing locating hardware. Low-maintenance design for dependable service life With no special coatings or complex mechanisms, the clamp offers straightforward upkeep and dependable repeatability. The stainless-steel body minimises the need for frequent replacement in humid or light-corrosive environments, while the plain spindle thread supports easy part replacement. This results in low maintenance, longer intervals between service actions and reduced total cost of ownership for workshop and production environments. Contact Metav Werkzeuge for a supply estimate or to arrange a technical consultation on the Kukamet vertical toggle clamp 211 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S211-2 GTIN: 8680731504002 Manufacturer: Kukamet Facts Clamping force (max): 1,200 N Holding force (max): 1,400 N Weight: 0.23 kg Pressure spindle: M6x40 eClass: 21041717 ETIM: EC011973 Special features Material: stainless steel Mounting: horizontal base Designation: Vertikalspanner 211 Arm: Not applicable Special feature: None FAQ What maximum clamping force does the clamp provide? The clamp delivers a maximum clamping force of 1,200 N; the holding capacity is rated at 1,400 N for secure retention under load with the Vertikalspanner 211. Is the clamp suitable for corrosive or humid environments? Yes, the stainless steel construction provides enhanced corrosion resistance, making the clamp appropriate for humid or mildly corrosive workshop conditions. How is the clamp mounted to a fixture or bench? Mounting is via a horizontal base, allowing secure attachment to flat surfaces and jigs; the horizontal base is designed for simple integration into existing fixture plates. What is the pressure spindle specification and how does it affect installation? The clamp uses an M6x40 pressure spindle, a standard metric thread that simplifies replacement parts and makes alignment adjustments straightforward during installation. Can the clamp be used in automated assembly lines? The compact mass (0.23 kg) and predictable toggle action make the clamp suitable for use in automated or semi-automated assemblies where compact, repeatable workholding is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamp With 1400 N Holding Force, M6x40 Screw, Black Oxide Finish - Kukamet
The compact design and robust clamping values make this clamp a practical choice for confined fixtures: reliable 1,200 N clamping force combined with a secure 1,400 N holding capacity and an angle base for easy mounting. Order the 213 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 213 Vertical Clamp by Kukamet — Angle-base lever clamp, 1,200 N clamping force 213 is a compact vertical lever clamp designed for secure vertical holding in jigs, fixtures and assembly stations, combining a small footprint with consistent clamping performance. Angle-base mounting for stable fixture Max clamping force 1,200 N Holding force 1,400 N Lightweight 0.265 kg for easy handling Reliable clamping where space is tight The compact lever design delivers a dependable 1,200 N clamping action while maintaining a minimal installation footprint. Its angle base mounting ensures stable attachment to plates and fixture frames, reducing lateral movement during operation. The device’s lightweight construction (0.265 kg) simplifies handling and placement in dense tooling setups, while the measured 1,400 N holding capacity provides secure retention for small to medium workpieces. This combination of compactness and force supports faster set-ups and fewer fixture adjustments. Built for repeatability and straightforward installation Engineered as a lever-style vertical clamp, the unit features a threaded pressure spindle sized M6x40, enabling fine adjustment of contact pressure and repeatable positioning. The mechanical principle delivers consistent clamping without complex adjustment routines, which minimises downtime between batches. The blackened finish affords a protective surface that resists light corrosion and reduces reflections in inspection areas. Where repeatable clamping and quick installation are priorities, this clamp streamlines fixture workflow and contributes to measurable gains in cycle reliability. Practical uses in production and assembly Suitable for use in jigs, holding fixtures and assembly benches, the vertical lever clamp secures components during machining, inspection and manual assembly tasks. The robust holding characteristic of the device makes it appropriate for small-scale machining operations and repetitive positioning tasks where consistent clamping force is required. As a component in modular fixture systems, the clamp integrates with plates and frames using the angle base mounting, offering a straightforward solution for both new jigs and retrofitting existing tooling. For dependable fixture performance, request supply of the Kukamet 213 vertical clamp through Metav Werkzeuge — delivered from Emmerich with application advice available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: B213-2 GTIN: 8680731507966 Manufacturer: Kukamet Facts Clamping force max: 1,200 N Holding force max: 1,400 N Weight: 0.265 kg Special features Mounting: Angle base Pressure spindle: M6x40 Finish: Blackened finish Category: Spanner / Lever clamp FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 1,200 N and a holding capacity of 1,400 N for reliable retention during fixture work. How is the clamp mounted on a fixture plate? Mounting is via an angle base that offers stable attachment to plates and frames for secure installation in jigs and fixtures. Which spindle thread is fitted for pressure adjustment? The unit is supplied with a pressure spindle sized M6x40 to allow fine adjustment of contact pressure and accurate positioning. Is this clamp suitable for retrofitting existing fixtures? Yes, the angle-base design and compact form factor make it well suited for integration into existing modular fixtures and assembly stations. What finish does the clamp have and why is it useful? The clamp has a blackened finish which provides surface protection and reduces glare in inspection or optical setups. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamp With Horizontal Base, Safety Lock, Stainless Steel - Kukamet
Benefit from corrosion-resistant stainless steel, a compact horizontal base and a positive safety locking mechanism that together provide consistent, repeatable clamping in production fixtures; order the 211 vertical clamp via Metav Werkzeuge or contact our consultants for tailored advice. Kukamet 211 vertical clamp (S211-2-L) — stainless steel with safety lock The 211 vertical clamp (S211-2-L) is a stainless steel vertical lever clamp engineered for secure workholding in jigs, fixtures and light assembly applications where repeatability and safety are essential. Stainless steel construction Safety locking mechanism Horizontal base mount M6x40 clamping spindle Consistent hold for efficient production The 211 offers a precise clamping force 1200 N with a higher holding force 1400 N, delivering reliable retention for repetitive operations and short cycle times. The measurable forces translate into predictable part stability under load, reducing rework and stoppages. As a compact lever clamp, it supports quick manual actuation while maintaining consistent pressure, making it suitable for small-batch production and fixture-based assembly where cycle-time efficiency is valued. Safer handling and straightforward integration Equipped with a mechanical safety lock, the clamp secures the lever in the closed position to prevent unintended release during handling or transport. The horizontal base mounting enables simple incorporation into existing plates and tooling, while the M6x40 clamping spindle allows for fine pressure adjustment and secure contact with the workpiece. Installation takes minimal time and the design minimises moving-part exposure, supporting safer workshop processes and easier layout planning. Robust construction for workshop environments Manufactured from stainless steel, the clamp is corrosion-resistant and suited to demanding shop-floor conditions where humidity or coolant exposure can be factors. The low mass and compact footprint contribute to flexible fixture design without adding unnecessary bulk; the listed 0.23 kg weight keeps the clamp unobtrusive on precision jigs. Long-term maintenance demands are low due to the corrosion-resistant material and straightforward mechanical design, helping to preserve uptime and reduce total cost of ownership. For secure, repeatable clamping from Kukamet, contact Metav Werkzeuge for expert supply and advice — Metav Werkzeuge delivers from Emmerich with transparent handling and reliable logistics; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S211-2-L GTIN: 8680731509120 Material: Stainless steel Manufacturer: Kukamet Core figures Clamping force (press): 1200 N Holding force: 1400 N Spindle: M6x40 Weight: 0.23 kg Design & features Mounting: Horizontal base Safety lock: Yes Category: Clamp (spanner) eClass: 21041717 ETIM: EC011973 FAQ What is the maximum clamping force of this clamp? The clamp provides a clamping force of 1200 N and a holding force of 1400 N for secure positioning. Can the clamp be mounted on custom fixtures? Yes, the horizontal base design allows simple integration into bespoke fixture plates and jigs. Is the locking mechanism suitable for transport within an assembly line? The mechanical safety lock secures the lever in the closed position, preventing unintended opening during handling. What materials is the clamp compatible with? Constructed from stainless steel, the clamp is suitable for use in environments where corrosion resistance is required and is commonly used with metal workpieces in light assembly and fixturing. Does the spindle allow pressure adjustment? The M6x40 clamping spindle permits fine adjustment of contact pressure and compensates for slight workpiece height variations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamp With Safety Lock, Angle Base, Blackened Finish - Kukamet
Take advantage of a compact, right-angle mounting that delivers up to 1,200 N clamping force together with a safety lock for secure, repeatable operations. Order the clamp directly via Metav Werkzeuge or ask our consultants for application guidance. B213-2-L Vertical Toggle Clamp (Kukamet) — 1,200 N clamping force, safety lock The B213-2-L Vertical Toggle Clamp is a compact right-angle clamp designed for fixtures, jigs and assembly benches where secure, repeatable clamping and a minimal footprint are required Vertical toggle clamp with safety lock Right-angle base for bench or fixture Clamping force up to 1,200 N Holding force up to 1,400 N Secure, repeatable clamping that stabilises production The clamp combines a robust mechanical linkage with a safety lock to prevent accidental release during machining or assembly. The clearly defined clamping force of up to 1,200 N and a maximum holding force of 1,400 N give predictable results when used in repetitive operations, reducing rework and downtime. For applications that demand consistent part location—such as welding jigs, inspection fixtures or CNC setup—the device provides a dependable mechanical hold that is easy to verify and document. Space-saving mounting for cramped workstations Fitted with a right-angle base, the clamp is intended for mounting to vertical or horizontal fixture plates without occupying excessive bench space. Its compact design and blackened finish suit dense fixture layouts and offer a subdued appearance for production environments. The compact footprint enables closer part nesting and better use of the available workspace, which can shorten cycle times and increase throughput on small to medium batch runs. Easy integration and straightforward handling in the workshop Assembly and replacement are simplified by the supplied actuating spindle (M6x40) and the clamp’s lightweight construction. The device installs quickly into existing fixture plates and aligns reliably under repeated actuation. The B213-2-L’s mechanical simplicity minimises maintenance requirements while sustaining clamping performance throughout long production runs. For customers transitioning from makeshift holding methods to engineered fixtures, this clamp represents a practical step towards safer, more efficient workholding. Contact Metav Werkzeuge today for tailored advice and to source Kukamet B213-2-L vertical toggle clamps directly from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B213-2-L GTIN: 8680731507973 Manufacturer: Kukamet Facts Clamping force max: 1,200 N Holding force max: 1,400 N Weight: 0.265 kg Actuating spindle: M6x40 Special features Mounting: right-angle base Finish: blackened finish Safety lock: integrated Material: blackened/oxidised steel FAQ Is the clamp suitable for welding fixtures? The Kukamet B213-2-L vertical toggle clamp is suitable for welding fixtures where a secure mechanical hold and a safety lock are required; the blackened finish helps resist surface effects from typical workshop use. How is the clamp mounted to a fixture plate? Mounting is via the right-angle base; the actuating spindle specification (M6x40) supports straightforward installation into standard fixture plates. What forces can be expected during operation? Expected values are a clamping force up to 1,200 N and a holding force up to 1,400 N, providing consistent performance for assembly and machining tasks. Is a specific arm required for this clamp? No separate arm is required for normal use; the design is supplied for direct integration with a right-angle base and the included spindle. Can the clamp be used for inspection jigs and gauges? Yes, the clamp’s repeatable clamping and safety lock make it well suited to inspection jigs, gauges and other quality-control fixtures. Who supplies the clamp in Europe? Kukamet supplies the clamp; Metav Werkzeuge handles distribution and advice from its Emmerich warehouse. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamp With Safety Lock, Blackened Finish - Kukamet
Compact, high‑force clamping with a secure safety lock and easy integration into vertical jigs: the combination of 1,200 N clamping power, a safety lock, and a slim black oxide finish delivers reliable repeatability and space‑saving mounting. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 212 — Vertical toggle clamp, 1,200 N, Kukamet The Vertikalspanner 212 is a vertical clamp designed to secure workpieces in jigs and fixtures, offering robust toggle action for consistent holding in production and assembly settings. 1,200 N clamping force 1,400 N holding force Safety lock for secure operation Vertical foot mounting for jigs Consistent clamping that speeds production The vertical toggle design provides a reliable mechanical advantage so that a modest lever movement generates a 1,200 N clamping force with a 1,400 N holding capability. This results in fewer reworks and shorter cycle times when repeated positioning is required. The clamp’s toggle action converts operator input into secure contact pressure, ensuring reproducible clamping force where precision and throughput matter. Safe operation reduces downtime A built‑in safety lock prevents accidental release during handling and machine cycles, lowering the risk of workpiece movement and protecting both components and staff. The locking feature is mechanical and intuitive, reducing training time on new fixtures while maintaining a high level of process safety. The lightweight construction (approx. 0.23 kg) makes manual handling straightforward without sacrificing stability. Simple integration into fixtures and jigs Engineered for straightforward mounting, the clamp uses a vertical foot mounting that sits flush with standard fixture plates and can be secured quickly. Fine adjustment is provided by the M6 x 40 pressure spindle, allowing precise contact distance and repeatable setup. The compact toggle profile helps retain access to adjacent components, making it suitable for dense jig layouts and automated cells. Durable finish for workshop longevity A black oxide finish provides basic corrosion resistance and a low‑glare surface that reduces reflection in close‑tolerance assemblies. The compact metallurgy and construction are tailored for routine industrial use, offering a balance between durability and cost efficiency. The result is a dependable clamp for repetitive production tasks where consistent performance and easy replacement are priorities. Contact Metav Werkzeuge in Emmerich to discuss fixture compatibility and secure delivery of the Kukamet 212 vertical clamp. Technical data Article number: B212-2-L GTIN: 8680731507874 Model: 212 Category: Spanner Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Pressure spindle: M6 x 40 Special features Safety lock Black oxide finish Vertical foot mounting Toggle clamp action FAQ What clamping force does the clamp provide? The clamp delivers a maximum clamping force of 1,200 N, with a holding capability up to 1,400 N, suitable for many assembly and fixturing applications. Is the clamp easy to fit into existing jigs? Yes. The vertical foot mounting and the M6 x 40 pressure spindle allow rapid installation and fine adjustment, making the device straightforward to integrate. Does the clamp include a locking mechanism? The unit features a safety lock that secures the toggle in the clamped position, reducing accidental releases during handling and operation. What is the weight and finish of the clamp? The clamp weighs approximately 0.23 kg and is supplied with a black oxide finish for basic corrosion resistance and low reflectivity. Which SKU should be ordered for this model? Order SKU B212-2-L for the Kukamet vertical clamp, model 212, to ensure the correct configuration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Vertical Clamp With Safety Lock, Horizontal Foot, Zinc-Plated - Kukamet
Compact galvanised construction and an integrated safety lock provide secure, repeatable clamping up to 1,200 N with a holding force of 1,400 N; take advantage of the small footprint and low weight for flexible jig use. Order the Vertical clamp 211 directly via Metav Werkzeuge or consult our advisors for specification help. Vertical clamp 211 — Kukamet, galvanised with safety lock The Vertical clamp 211 is a compact vertical clamping device for secure fixture on machine tables and jigs, designed for horizontal-foot mounting. Compact galvanised design for corrosion resistance Safety lock for secure, repeatable clamping 1,200 N clamping capacity, 1,400 N holding force Horizontal-foot mounting for stable attachment Reliable clamping for repetitive production tasks The 211 model delivers consistent performance through a defined maximum clamping force of 1,200 N and a maximum holding force of 1,400 N. For production environments where repeatability matters, the combination of compact design and measured clamping values reduces variation during part processing. The safety lock prevents accidental release, supporting safe cycle operation and minimising rework. These measurable specifications serve as a reliable basis for process planning and cycle-time calculation. Fast integration and space-saving fixture design Thanks to the horizontal foot mounting, the unit installs quickly on machine plates or jigs without complex adapters. The small mass of 0.23 kg and the compact footprint make it suited to tight fixture layouts and multi-clamp setups where accessible clamping points are limited. The spindle detail M6x40 enables compatibility with common mounting fasteners, simplifying integration into existing tooling. Reduced set-up time and straightforward mounting contribute directly to higher throughput. Durable materials and low maintenance demands Made from galvanised steel, the clamp is protected against corrosion in typical workshop conditions, extending service intervals and lowering total cost of ownership. The lever-clamp style construction affords robust mechanical advantage while remaining simple to inspect and maintain. Where a dependable, low-maintenance fixture is required, the galvanised finish and mechanical safety features help sustain consistent clamping performance over many cycles. Practical advantages for workshop and light industrial use As a small yet capable clamping solution, this vertical clamp suits assembly benches, test rigs and light machining operations. The defined clamping and holding forces allow straightforward selection for soft to medium workpieces without excessive fixture overdesign. The presence of a mechanical safety lock supports operator confidence during manual handling and semi-automated processes. For operators seeking predictable behaviour and quick retrofit options, the 211 model offers a pragmatic balance of performance and simplicity. Request specification assistance from Metav Werkzeuge to select the Kukamet Vertical clamp 211 for your fixture layout — call +49 2822 7131930 or eMail info@metav-werkzeuge.com for tailored guidance and supply from Emmerich Technical data Article number: 211-2-L GTIN: 8680731501209 Model: 211 Manufacturer: Kukamet Facts Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Spindle: M6x40 eClass: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Safety lock: Yes Type: vertical clamp Storytrigger: lever clamp FAQ What is the maximum clamping force of this vertical clamp? The Vertical clamp 211 from Kukamet provides a maximum clamping force of 1,200 N and a holding force of 1,400 N, suitable for light industrial fixtures. Can the clamp be mounted on standard machine plates? Yes. The 211 model is designed for horizontal-foot mounting and uses an M6x40 spindle interface for common attachment methods. Is the surface treatment suitable for humid workshop environments? The clamp is galvanised, offering corrosion resistance appropriate for typical workshop conditions and reducing maintenance needs. Does the clamp include a safety mechanism to prevent accidental release? Yes. The Kukamet Vertical clamp 211 is fitted with a built‑in safety lock to secure the clamping position and prevent unintended opening. Which SKU should be referenced when ordering or requesting technical details? Refer to SKU 211-2-L when enquiring about the Kukamet Vertical clamp 211 for precise identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com