Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
100mm Vertical Clamp Horizontal Foot, 750N Closing Force, Zinc Plated - Kukamet
Compact clamp for reliable fixtures: compact, corrosion-resistant construction combined with defined holding and clamping forces ensures secure workholding in small jigs. The zinc-plated design and adjustable pressure spindle give durable, adaptable performance for repetitive clamping tasks. Order the Kukamet 211 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 211 Vertical toggle clamp — zinc-plated, 1000 N holding force (Kukamet) The 211 is a vertical toggle clamp designed for secure, space-saving workholding on horizontal fixture plates and jigs Zinc-plated corrosion protection 1000 N holding force 750 N clamping force M5x35 pressure spindle adjustment Horizontal base mounting Secure hold for precision and repeatability With a 1000 N holding force and defined 750 N clamping force, this vertical toggle clamp delivers consistent clamping performance that supports precision assembly and machining operations. The separation of holding and clamping values explains how the device resists separation forces (holding) while applying the required contact pressure (clamping) to the workpiece. That separation reduces shift and vibration during processing, which is particularly valuable in short-cycle or repetitive tasks where repeatability directly affects quality. Compact, adjustable integration into fixtures The combination of a horizontal base mounting and an adjustable M5x35 pressure spindle enables straightforward integration into small jigs and bespoke fixtures. The spindle permits fine adjustment of contact height and pressure without additional components, simplifying set-up and changeover. At 0.155 kg the clamp is lightweight yet sturdy, helping to keep overall fixture mass low while maintaining dependable function in manual or semi-automated workflows. Durable finish and low-maintenance operation A zinc-plated finish protects the mechanism from corrosion in workshop environments, reducing maintenance intervals and preserving appearance under regular handling. The simple toggle mechanism requires minimal servicing and allows rapid manual actuation for frequent clamping cycles. Suited to sheet metal, small assemblies and general workshop clamping tasks, the clamp offers reliable holding with a compact footprint that supports efficient production flow. For technical advice or to specify the Kukamet 211 vertical toggle clamp for a particular jig application, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 211-1 GTIN: 8680731501117 Manufacturer: Kukamet Facts Weight: 0.155 kg Holding force: 1000 N Clamping force: 750 N Pressure spindle: M5x35 Mounting: horizontal base Material: zinc-plated SKU: 211-1 Special features Arm: not applicable Press spindle specification present No special accessories included eClass: 21041717 ETIM: EC011973 FAQ What is the difference between holding force and clamping force for this clamp? Holding force refers to the maximum force the clamp resists before release, while clamping force denotes the applied contact pressure; the Kukamet 211 provides 1000 N holding and 750 N clamping force to ensure stable workholding. Can the pressure spindle be adjusted for differing workpiece heights? Yes, the M5x35 pressure spindle on the 211 vertical toggle clamp allows fine height and pressure adjustments to accommodate varying part thicknesses. Is the clamp suitable for use on standard fixture plates? The horizontal base mounting makes this clamp compatible with common fixture plates and jigs; the compact design supports space-saving installation. How resistant is the finish to workshop conditions? The zinc-plated surface provides corrosion resistance and reduces maintenance needs, keeping the clamp serviceable in typical workshop environments. What is the weight and how does that affect fixture design? At 0.155 kg, the clamp is lightweight, simplifying fixture balancing and helping to keep overall fixture mass low for manual handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp Three-Point Heavy-Duty Arm With Safety Lock, Zinc Plated - Kukamet
Robust vertical clamping with a 100 mm holding arm and a galvanised finish ensures dependable fixation up to 3,300 N; combine reliable mechanical security, corrosion-resistant material and compact mounting for consistent cycle times. Order the clamp directly via Metav Werkzeuge or consult the specialists for application support and fast delivery. Kukamet Vertikalspanner 212 — Vertical toggle clamp with 100 mm arm and safety lock The Vertikalspanner 212 is a vertical toggle clamp engineered for repeatable, secure clamping in jigs, fixtures and general workshop applications Solid 100 mm holding arm Safety locking mechanism Galvanised corrosion resistance Up to 3,300 N holding force Secure clamping that supports production consistency This vertical toggle clamp delivers measured performance: a 3,000 N clamping force combined with a 3,300 N holding force provides a reliable safety margin for fixtures exposed to vibration or side loads. The combination of a solid holding arm and a safety locking mechanism prevents unintended release once the clamp is engaged, reducing rework and improving first-pass yield. The galvanised finish contributes to process reliability by resisting surface corrosion, which helps to maintain consistent clamping geometry over time and supports predictable cycle times in batch production. Built to last — lower lifecycle maintenance Constructed from galvanised steel with a massive holding arm, the clamp is engineered for a long service life while remaining compact and lightweight at approximately 0.785 kg. The heavy-duty components reduce wear on pivot points and enable stable performance over many cycles, which translates into lower maintenance intervals and fewer unplanned stoppages. The integrated safety lock enhances operator confidence during manual loading and unloading, while the durable finish minimises the need for protective recoating in standard workshop environments. Fast integration into jigs and assembly stations The vertical foot mounting simplifies attachment to plates and bases, making the clamp suitable for retrofits as well as new fixture designs. Its compact footprint and standardised geometry allow straightforward positioning close to the workpiece, enabling shorter lever arms and more efficient force transmission. For further technical clarification or to confirm compatibility with a specific jig layout, Metav Werkzeuge provides detailed specifications and application advice via email or phone: info@metav-werkzeuge.com, +49 2822 7131930, WhatsApp +49 170 2837271 Contact Metav Werkzeuge for tailored advice on integrating the Kukamet vertical toggle clamp and secure procurement from Emmerich Technical data SKU: 212-4-D-L-C1 GTIN: 8680731501728 Manufacturer: Kukamet Material: Galvanised steel Weight: 0.785 kg Facts Arm length: 100 mm Max clamping force: 3,000 N Max holding force: 3,300 N Special features Vertical foot mounting Solid holding arm Safety locking mechanism Finish: galvanised FAQ What is the main purpose of this vertical clamp? The vertical toggle clamp is designed to secure workpieces in jigs and fixtures where a vertical actuation and locked position are required; the Vertikalspanner 212 offers repeatable fixation for production and assembly tasks. Which materials is the clamp suitable to work with? The clamp’s galvanised steel construction and the specified holding forces make it suitable for a wide range of workpieces and fixture setups; selection should be based on workpiece mass and applied process loads. How is the clamp mounted to a fixture plate? Mounting is performed via the vertical foot base, allowing direct attachment to plate surfaces; standard hole patterns and simple fastening give quick installation and repeatable positioning. Does the clamp include a safety feature to prevent accidental release? Yes, the unit incorporates a safety locking mechanism that keeps the clamp locked under load, preventing accidental opening during handling or vibration. Can the clamp withstand harsh workshop environments? The galvanised finish provides enhanced corrosion resistance for typical workshop conditions; for highly corrosive or specialised environments, additional surface protections should be considered. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp Three-Point Heavy-Duty Holding Arm With Safety Lock, 1.5kN Thrust - Kukamet
Take advantage of the combination of robust clamping power, a compact 68 mm arm and a secure safety lock for reliable fixture performance. Order the 241 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 241 Vertical Clamp — Horizontal-base toggle clamp with safety locking and 68 mm arm The 241 Vertical Clamp is a durable horizontal-base toggle clamp designed for secure workpiece retention in jigs, fixtures and assembly stations, delivering high holding capability in a compact format Horizontal base for stable mounting 68 mm heavy-duty holding arm Holding force 5,000 N for secure clamping Safety locking mechanism for process security Consistent clamping force for reliable production flow The vertical toggle unit offers a clear technical advantage through its high holding force of 5,000 N combined with a maximum pressing force of 1,500 N, which together ensure stable clamping without frequent readjustment. This consistent mechanical performance reduces cycle variability in repetitive assembly or welding operations and supports process reliability. The compact 68 mm arm keeps the fixture footprint small while transferring clamping energy efficiently, allowing shorter clamp travel and faster repositioning in automated or semi-automated setups Integration made straightforward for jig and fixture builders Mounting is effected via a horizontal base, which simplifies alignment on flat fixture plates and ensures predictable load paths under dynamic conditions. The clamp’s opening angle of 100° and modest weight (1.288 kg) make it suitable for retrofitting into existing tooling layouts where space and mass are constrained. Clear numeric specifications support quick engineering decisions and allow precise calculations for fixture stiffness and cycle kinematics, shortening design iterations and minimising downtime during changeover Built for safety and long service life A massive holding arm and a dedicated safety locking mechanism prevent accidental release during machining or handling operations, addressing occupational safety and minimizing scrap risk. The component is finished in a black blued finish, which offers basic corrosion resistance and an industrial appearance that integrates well with workshop hardware. Robust mechanical construction reduces maintenance intervals and supports a predictable lifetime under regular production loads, contributing to lower total cost of ownership over time Suitable applications and practical benefits This toggle-style clamp is primarily intended for general industrial clamping tasks in assembly, welding fixtures and test rigs where firm retention is essential. The combination of high holding force and compact geometry supports clamping of medium to heavy parts while maintaining easy access for operators and automation tooling. The design balances power and compactness, enabling firms to standardise on a single clamp type across multiple stations and thereby simplify spare parts management and inventory Contact Metav Werkzeuge in Emmerich for a tailored application review or to discuss the suitability of the 241 vertical clamp for specific fixture requirements — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 241-4-D-L-C1 GTIN: 8682843520635 Manufacturer: Kukamet Core technical data Max holding force: 5,000 N Max pressing force: 1,500 N Arm length: 68 mm Opening angle: 100° Weight: 1.288 kg Mounting: horizontal base SKU: 241-4-D-L-C1 Special features Massive holding arm Safety locking mechanism Black blued finish Category: Toggle clamp (vertical) eClass: 21041717 ETIM: EC011973 FAQ What clamping forces can be expected from this toggle clamp? The 241 vertical clamp provides a holding force of 5,000 N and a maximum pressing force of 1,500 N, values suitable for medium to heavy-duty fixture tasks Is the clamp suitable for retrofitting into existing fixtures? Yes, the horizontal base and compact 68 mm arm length make the clamp easy to integrate into existing jigs and fixture plates Does the clamp include a safety lock? The clamp features a dedicated safety locking mechanism, designed to prevent unintended release during handling or machining What finish does the clamp have and what does it mean for workshop use? The unit is supplied with a black blued finish, offering basic corrosion protection and a durable surface for industrial environments How can Metav Werkzeuge help specify this clamp for an application? Metav Werkzeuge can assist with application assessment and technical matching for the 241 vertical clamp (SKU 241-4-D-L-C1) to ensure the clamp meets the fixture and process requirements Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp Three-Point Massive Holding Arm, Safety Lock, Horizontal Base - Kukamet
With a 6,000 N maximum holding force, 2,000 N clamping force and a massive hold arm with safety lock, the 241 vertical toggle clamp delivers reliable, repeatable workholding for production and fixture applications; order the clamp directly via Metav Werkzeuge or consult our technical advisers for specification support. 241 Vertical Toggle Clamp — 6,000 N holding force, 2,000 N clamping force (Kukamet) The 241 Vertical Toggle Clamp is a robust workholding device designed for secure vertical clamping in jigs and fixtures, combining compact integration with high holding capacity. Massive hold arm with safety lock 6,000 N maximum holding force 2,000 N clamping force Horizontal base for stable mounting Secure clamping for continuous production The clamp provides a high holding force of 6,000 N and a defined clamping force of 2,000 N, which together reduce slippage and rework in repetitive operations. These measurable performance values translate directly into fewer interruptions on the shop floor and more predictable cycle times. The construction keeps the load path short and rigid, while the moderate mass (approx. 2.52 kg) contributes to steady contact pressure. For assembly and fixture designers the data allows straightforward load calculations and process validation. Easy integration into fixtures and jigs With a horizontal foot for mounting and an arm length of 180 mm, the clamp is suitable for a wide range of fixture geometries where vertical actuation is required. The fixed 100° operating angle delivers a clear open and closed position, simplifying end-of-travel detection and mechanical interlocks. The blackened finish offers basic surface protection and a reduced visual contrast in production setups where appearance and resistance to light wear matter. Installation is compatible with standard workshop practices and leaves the clamping area accessible for part loading and tooling. Robust design and operator safety A massive hold arm and integrated safety lock prevent accidental release under load, enhancing operator safety and process reliability. Pivot points and the toggle geometry are sized for repeated cycles, keeping maintenance demands low while extending service life. The clamp’s compact footprint allows dense placement in multi-station fixtures, while the solid build reduces the need for frequent adjustments—benefits that support lean manufacturing and lower total cost of ownership. Visual inspection intervals and simple lubrication of pivot pins are sufficient to maintain consistent performance. Contact Metav Werkzeuge for availability of the Kukamet 241 vertical toggle clamp from our Emmerich warehouse and for specialist advice on fixture integration; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 241-6-D-L-C3 GTIN: 8682843520727 Weight: 2.52 kg Facts Maximum holding force: 6,000 N Maximum clamping force: 2,000 N Arm length: 180 mm Operating angle: 100° Special features Horizontal foot mounting Massive hold arm Safety lock mechanism Blackened finish Category: Clamps (spanner) eClass: 21041717 ETIM: EC011973 FAQ What is the maximum holding and clamping force of the clamp? The Kukamet 241 vertical toggle clamp (SKU 241-6-D-L-C3) offers a maximum holding force of 6,000 N and a clamping force of 2,000 N, specified for static workholding in fixtures. How is the clamp mounted in a jig or fixture? The unit is supplied with a horizontal foot for stable attachment to fixture plates; the clamp’s compact base and standard hole pattern allow rigid mounting in common jig layouts. Which features enhance operator safety during operation? The clamp includes a safety lock and a massive hold arm, which together prevent unintended opening under load and provide a secure locked state for manual handling tasks. Is the finish suitable for workshop environments? The blackened finish provides basic surface protection and reduces glare; the construction is intended for industrial workshop use where mechanical robustness is the primary requirement. What maintenance is required to keep the clamp operational? Routine visual checks, removal of debris from pivot areas and occasional light lubrication of the pivot pins are sufficient to maintain reliable function and a long service life for the 241 vertical toggle clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp With 6000N Holding Arm, 2000N Thrust, Safety Lock - Kukamet
Take advantage of the combination of robust holding power and a secure safety lock for stable production processes. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Vertical clamp 222 — Kukamet vertical clamping solution with 6,000 N holding arm and safety lock A Vertical clamp 222 is a lever-style vertical clamping device designed for secure workpiece retention in jigs, fixtures and workshop assemblies. 6000 N holding arm and safety lock Max pressing force 2,000 N Horizontal-foot mounting for secure fixing Blackened finish for industrial durability Secure retention that keeps processes moving The vertical clamping device delivers a 6,000 N holding arm capacity combined with a 2,000 N maximum pressing force, providing a clear distinction between retention and clamping action. The higher holding force prevents unintended release of the workpiece when the device is locked, while the pressing force defines the clamping pressure applied during setting. This separation increases process reliability and reduces rework cycles, making the clamp suitable for repetitive fixture tasks where consistent retention and repeatability are required. Fitting and handling designed for workshop use Mounting is performed via a horizontal foot, which offers stable attachment to plates or jig bases and simplifies alignment in typical workshop fixtures. The unit’s blackened finish resists wear and provides a low-reflective surface suitable for production environments. At approximately 2.34 kg, the clamp balances robustness with manageable handling during fixture assembly and maintenance. The lever mechanism and 100° clamping angle ensure ergonomic operation while maintaining compact installation space. Safety and workflow benefits for day-to-day production An integrated safety locking mechanism prevents accidental release and supports safe, unattended cycles in batch production. The lever-style actuation speeds up clamping actions, shortening cycle times and contributing to higher throughput. Built for durability and predictable behaviour, this clamping solution reduces downtime and aligns with quality-driven workflows in industrial and craft settings, supporting repeatable jigs and fixture setups without complex adjustments. For dependable clamping performance select the Kukamet Vertical clamp 222 and contact Metav Werkzeuge for tailored technical advice and supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 222-6-C-L GTIN: 8682843520529 Manufacturer: Kukamet Weight: 2.34 kg Material: blackened finish Facts Holding arm force: 6,000 N Maximum pressing force: 2,000 N Clamping angle: 100° Special features Holding arm with 6,000 N holding capacity and safety lock Horizontal-foot mounting Blackened, burnished finish Lever-type clamping mechanism FAQ What is the difference between holding force and pressing force? The holding force refers to the clamp’s retention capacity (here 6,000 N) while the pressing force (2,000 N) is the actual clamping pressure applied; the Vertical clamp 222 separates these functions for safer and more reliable retention. How is the clamp mounted to a fixture? Mounting is via a horizontal foot on the base, allowing secure attachment to jig plates or fixture bases; the Kukamet unit is designed for standard workshop fixing methods. Does the clamp include a safety lock and how does it work? Yes—the clamp features a safety locking mechanism that prevents unintended release of the lever once engaged, improving operator safety and process stability. What environments and applications suit this clamping device? The lever-style vertical clamp is intended for jigs, fixtures and repetitive assembly tasks in industrial workshops where secure retention and fast actuation are priorities. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp With Horizontal Base, 3,000 N Thrust, Zinc Plated, Massive Holding Arm, Safety Lock - Kukamet
Take advantage of a compact, corrosion‑resistant workholding solution that combines a 100 mm reach, a galvanised finish and a robust safety locking mechanism. The resulting reduction in setup time and reliable part retention under loads up to 3,300 N supports a steady production flow. Order or discuss application details directly with Metav Werkzeuge for immediate supply and technical advice. Vertical clamp 211 — Kukamet vertical clamp with 100 mm arm and safety lock Vertical clamp 211 is a compact toggle clamp for secure vertical workholding in light industrial and workshop fixtures Massive holding arm with safety lock 100 mm reach arm Galvanised finish for corrosion resistance Horizontal‑foot mounting for stable set‑up Faster, more reliable clamping for repetitive production The compact vertical clamp reduces cycle time by delivering immediate, repeatable clamping with a clear mechanical advantage. With a maximum pressing force of 3,000 N and a maximum holding force of 3,300 N, the unit secures workpieces reliably during machining, assembly or testing operations. The combination of a short, rigid arm and a dedicated horizontal mounting foot ensures that the clamp remains fixed under lateral and vertical loads, cutting down re‑adjustments and improving throughput on repetitive tasks. Built to withstand workshop conditions Surface protection is essential in everyday use. The galvanised construction of the clamp resists corrosion and simplifies maintenance, so fixtures retain precision over time. A massive holding arm enhances stiffness while the integrated safety lock prevents accidental release when the clamp is under load. These features together help to extend service life and reduce downtime caused by component wear or unexpected part movement. Simple installation and clear technical credentials Designed for straightforward integration, the clamp mounts via a horizontal foot that aligns easily with standard tooling plates and jigs. At under 1 kg, the assembly is light enough to reposition during fixture changes but remains heavy enough to avoid vibration during operation. The compact footprint supports denser fixture layouts, enabling more efficient use of table space without sacrificing clamping force or reliability. Suited to small‑batch and series production The clamp's mechanical simplicity makes it a pragmatic choice where repeatable clamping is required without complex pneumatics or hydraulics. Its robust design and galvanised finish suit both workshop and light industrial environments, supporting applications where reliable manual action and a positive locking feature are desirable. For traceable procurement and rapid replenishment the clamp is stocked with the trade reference SKU 211-4-D-L-C1, enabling consistent reorder handling. For application checks or to secure supply of the Kukamet Vertical clamp 211, contact Metav Werkzeuge for expert advice and immediate processing via eMail info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 211-4-D-L-C1 GTIN: 8680731501346 Model: 211 eCl@ss: 21041717 ETIM: EC011973 Facts Arm length: 100 mm Max pressing force: 3,000 N Max holding force: 3,300 N Weight: 0.89 kg Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm and safety lock Category: Spanner FAQ What clamping and holding forces does the clamp provide? The Vertical clamp 211 offers a maximum pressing force of 3,000 N and a holding force up to 3,300 N, giving secure retention for many light industrial tasks. How is the clamp mounted to a fixture or table? Mounting is via the horizontal foot; this alignment simplifies installation on tooling plates and is common in jig and fixture layouts. Is the clamp suitable for corrosive or humid environments? The clamp’s galvanised finish increases resistance to corrosion, making it more durable in workshop atmospheres than untreated steel variants. Can the clamp be used for repeatable production set‑ups? Yes, the mechanical toggle action, short rigid arm and safety lock make it well suited to repetitive operations and small‑batch production. Which reference helps with reordering or specifying the clamp? Use the trade reference SKU 211-4-D-L-C1 and GTIN 8680731501346 when reordering to ensure the correct model is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp With Horizontal Foot, 3,000 N Thrust, Massive Arm & Safety Lock - Kukamet
Take advantage of a compact, high-force solution that combines robust clamping, a massive holding arm with safety lock, and straightforward mounting for jigs and fixtures; order directly via Metav Werkzeuge or ask our consultants for application support. Vertical toggle clamp 211 — vertical clamp with 100 mm arm and 3,300 N holding force (Kukamet) A Vertical toggle clamp 211 engineered for reliable vertical workholding in jigs, fixtures and assembly operations across workshops and small production lines. Massive holding arm and safety lock 100 mm clamping arm length Holding force 3,300 N Horizontal base for stable mounting Secure, high-force workholding that reduces rework The clamp delivers a holding force of 3,300 N with a maximum pressing capacity of 3,000 N, providing consistent clamping for repeatable processes. The 100 mm arm gives an extended reach for a range of component sizes while the horizontal base simplifies fixture integration. The blackened finish offers basic corrosion resistance and a professional appearance; the overall specification supports stable positioning and reduces the risk of slippage, which in turn lowers scrap rates and boost throughput. Faster setup, safer operation and less downtime A massive holding arm combined with a dedicated safety lock ensures the clamping element remains secure under vibration and handling, improving operator confidence and machine uptime. The compact unit, weighing just 0.89 kg, is easy to handle during fixture assembly and replacement. Designed as a toggle-style workholding device, the mechanism gives a rapid single-action clamp and release, cutting set-up time and simplifying process steps for operators. Compact design for workshop and production environments With a small footprint and a horizontal mounting base, the clamp integrates cleanly into bespoke jigs or standard tooling plates. The lever-clamp principle provides straightforward mechanical advantage without the need for external power, making it suitable where simplicity and reliability are priorities. The robust construction supports frequent daily cycles and, being service-friendly, the device requires only routine inspection to maintain performance and safety. Contact Metav Werkzeuge for tailored mounting recommendations and rapid supply from Emmerich — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: B211-4-D-L-C1 Designation: 211 Brand: Kukamet Category: Spanner Facts Arm length: 100 mm Holding force: 3,300 N Pressing force (max): 3,000 N Weight: 0.89 kg eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Safety lock Horizontal base for mounting Blackened finish Lever clamp style FAQ What is the maximum holding force of this clamp? The holding force is 3,300 N for the Vertical toggle clamp 211 (Kukamet, SKU B211-4-D-L-C1), providing secure retention for medium-duty workholding tasks. What arm length does the device have and why does it matter? The clamping arm is 100 mm long, which gives extra reach for larger components while maintaining stable leverage for reliable clamping cycles. How is the clamp mounted? The unit uses a horizontal base for stable mounting in jigs, fixtures and tooling plates, enabling straightforward integration into production assemblies. Which safety features are included? The clamp is fitted with a safety lock and a massive holding arm to prevent accidental release under vibration or external loads, improving on-machine safety. Is the clamp suitable for frequent use in workshop environments? Yes; the lever-toggle design and robust construction make the clamp suitable for frequent daily cycles in workshops and smaller production lines. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp With Massive Arm And Safety Lock, 3,000N Thrust / 3,300N Holding Force - Kukamet
Take advantage of a compact, high-force clamping solution that combines a 100 mm massive holding arm, a safety locking mechanism and a robust black oxide finish for reliable, repeatable workholding. Order the clamp via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp 212 (B212-4-D-L-C1) — 100 mm arm · 3,300 N holding force · Kukamet The Vertical toggle clamp 212 is a vertically actuating lever clamp engineered for secure workholding in jigs, fixtures and assembly stations, offering a solid holding arm and an integrated safety lock for repeatable clamping cycles Robust 100 mm holding arm Safety locking mechanism Holding force 3,300 N Black oxide finish for corrosion resistance Reliable clamping where consistency matters The combination of a holding force of 3,300 N and a clamping force of 3,000 N delivers consistent retention for repetitive processes, reducing rework and downtime. The vertical actuation keeps the workpiece perpendicular to the clamping motion, which improves repeatability in machining and assembly operations. Numerical specifications enable planners to compare fixtures objectively and integrate the clamp into automated stations or manual jigs with predictable load behaviour. The compact construction keeps the footprint small while providing industrial-grade retention. Faster set-up and safer operation on the shop floor With a 100 mm arm and a vertical foot mounting, this clamp allows quick installation on fixture plates and tooling boards, cutting preparation time and simplifying changeovers. The safety locking mechanism prevents accidental release during handling and machining, improving operator confidence and reducing the risk of workpiece movement. The lever-action design provides fast engagement and reliable mechanical advantage, which supports efficient takt times and stable clamping without the need for complex auxiliary hardware. Built for durability and low-maintenance use Constructed with a massive holding arm and finished in black oxide for enhanced corrosion resistance, the clamp is designed for frequent industrial use. The unit’s modest mass (0.785 kg) and compact form make it easy to integrate into fixtures without adding excessive bulk, while the robust materials extend service life under normal workshop conditions. Routine inspection and light lubrication of pivot points maintain performance; the straightforward design minimises maintenance effort and supports long-term operational reliability. Choose Kukamet’s Vertical toggle clamp 212 for robust, repeatable workholding — contact Metav Werkzeuge for tailored advice and specification support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: B212-4-D-L-C1 Model: 212 Brand: Kukamet Category: Clamps EClass: 21041717 ETIM: EC011973 Core specifications Clamping force (max): 3,000 N Holding force (max): 3,300 N Arm length: 100 mm Weight: 0.785 kg Features & materials Massive holding arm Safety locking mechanism Mounting: vertical foot Finish: black oxide Material: blackened steel FAQ What applications is this clamp suited for? The Vertical toggle clamp 212 (Kukamet, SKU B212-4-D-L-C1) is suited for jigs, fixtures and assembly stations that require vertical actuation and reliable retention up to the specified holding force. How is the clamp mounted in a fixture? Mounting is via the vertical foot; the clamp is fastened to fixture plates or tooling boards in a vertical orientation to deliver perpendicular clamping motion and compact integration. What are the maximum forces the clamp can handle? The clamp provides a clamping force up to 3,000 N and a holding force up to 3,300 N, allowing objective planning for workpiece retention under typical production loads. Does the clamp include safety features to prevent accidental release? Yes, the unit features an integrated safety locking mechanism that secures the lever in the clamped position to prevent unintended opening during handling or machining. What maintenance is required to keep performance stable? Periodic inspection of pivots and the locking mechanism plus light lubrication of moving parts preserves smooth operation and prolongs service life; replacement is straightforward if wear occurs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp With Massive Holding Arm, 3,300N Hold Force, Zinc Plated - Kukamet
Benefit from robust clamping performance and a galvanised, corrosion‑resistant body combined with a sturdy 100 mm arm for reliable fixture setup; the unit supports high holding loads while remaining compact and easy to integrate. Order the (Vertical clamp 211) directly via (Metav Werkzeuge) or ask our consultants if needed. Vertical clamp 211 — vertical clamping device with 100 mm arm, galvanised (Kukamet) The Vertical clamp 211 is a compact vertical clamping device designed for production fixtures and workshop jigs, offering a solid 100 mm arm and horizontal‑foot mounting for straightforward installation. Massive holding arm 100 mm clamping arm Galvanised corrosion protection Up to 3,300 N holding force Consistent force where it matters The clamp delivers a pressing force of 3,000 N and a maximum holding force of 3,300 N, providing dependable restraint for repetitive machining or assembly tasks. These figures describe the mechanical capability: pressing force refers to the active clamp travel load, while holding force indicates the static retention under load. The robust design with a massive holding arm reduces deformation under stress, ensuring repeatable results and minimised rework in production environments. Built for harsh workshop conditions A galvanised finish protects the body against corrosion and extends service life in workshop atmospheres. The horizontal‑foot mount allows secure attachment to fixture plates or machine tables and simplifies retrofitting into existing setups. At a mass of 0.782 kg the unit is light enough for flexible fixture layouts yet heavy enough to feel solid during operation, balancing manoeuvrability with mechanical stability. Fast integration and reliable operation Installation requires minimal effort thanks to the horizontal base and standard fixing points, enabling quick replacement of hand levers or worn clamps in jigs. The compact 100 mm arm provides accessibility in confined clamping zones while maintaining clearance for tooling. For repetitive processes, the clamp’s steady performance reduces cycle variation and supports consistent throughput, contributing to measurable efficiency gains on the shop floor. For robust vertical clamping from Kukamet, contact Metav Werkzeuge for procurement advice or to arrange supply directly from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 211-4-D-C1 GTIN: 8680731501315 ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 100 mm Pressing force max: 3,000 N Holding force max: 3,300 N Weight: 0.782 kg Special features Massively reinforced holding arm Horizontal‑foot mounting Material: galvanised Suitable for lever clamping applications FAQ What maximum holding force does this clamp provide? The clamp offers a maximum holding force of 3,300 N, enabling secure fixation of components during machining and assembly. Is the surface protected against corrosion? Yes, the body is galvanised, which provides reliable corrosion resistance for workshop environments and extends service life. How is the clamp mounted to a fixture? Mounting is via a horizontal‑foot base that fits standard fixture plates and allows straightforward retrofitting into existing jigs. What arm reach does the unit have? The device features a 100 mm arm, giving good reach for confined clamping zones while keeping the overall footprint compact. Can the clamp be used for repetitive production cycles? The robust construction and consistent force characteristics make this clamp well suited to repetitive cycles, where steady clamping reduces variation and improves throughput. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp With Massive Holding Arm, 3.3 kN Holding Force, 3 kN Thrust - Kukamet
Take advantage of the combination of a massive 100 mm holding arm, high clamping forces and a compact, workshop-ready design for reliable fixture performance. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 212 Vertical Clamp — Vertical Toggle Clamp with 100 mm Arm (Kukamet) The 212 Vertical Clamp is a vertical toggle clamp designed for upright mounting in jigs and fixtures, delivering strong clamping and secure holding for repetitive production tasks. Massive 100 mm holding arm Vertical foot for upright mounting Holding force up to 3,300 N Blackened burnished finish Secure, measurable clamping for production use The vertical toggle design provides a clear, quantifiable advantage in fixtures that require repeatable force. With a holding force of 3,300 N and a clamping/pressing force of 3,000 N, the device secures workpieces against movement during machining, welding or assembly operations. These force values describe the clamp’s performance under load and support process reliability, reducing rework and improving cycle consistency in batch production. The forces are stated as peak capabilities for design and fixture planning. Robust construction that reduces setup time A massive holding arm and a vertical foot for upright mounting ensure a stable interface with base plates and tooling plates. The clamp’s compact mass (approx. 0.809 kg) and durable blackened burnished finish simplify integration into existing jigs without requiring major fixture redesign. This solid construction minimises vibration and contributes to a longer service life in industrial environments, enabling quicker set-ups and fewer adjustments between cycles. Practical installation and application guidance The clamp is intended for fixed, upright installation using the vertical foot; the lever-style action converts operator input into a high clamping force via a toggle mechanism, which locks securely in the clamped position. This behaviour is beneficial where positive, downward force is needed and where a clear visual/clamped state is required on a station. The compact footprint and standard mounting arrangement make this solution suitable for custom fixtures, welding jigs and assembly stations where consistent repeatability is required. Integration benefits and supplier reliability Supplied by a trusted partner network, the clamp combines straightforward mechanics with industrial-grade specifications. Its simple mechanical design supports easy inspection and predictable maintenance intervals, while the listed force ratings and dimensional data allow planners and purchasing to specify the component precisely for production fixtures. The combination of measurable performance and robust materials makes it a practical choice for workshops aiming to standardise clamping on multiple workstations. Contact Metav Werkzeuge to discuss suitability for specific fixtures, request the catalogue page or arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice Technical Data Article number: B212-4-D-C1 GTIN: 8682843522332 Model: Vertical clamp 212 Core specifications Arm length: 100 mm Holding force max: 3,300 N Pressing force max: 3,000 N Weight: 0.809 kg ECLASS: 21041717 ETIM: EC011973 Materials & features Finish: blackened burnished Mounting: vertical foot Massive holding arm Category: Clamp Manufacturer: Kukamet FAQ What maximum holding and clamping forces does this clamp provide? The 212 Vertical Clamp from Kukamet provides a holding force of up to 3,300 N and a clamping (pressing) force of 3,000 N, as stated for fixture design and selection. How is the clamp mounted and oriented on a fixture? The unit is fitted using a vertical foot for upright mounting; the arrangement is suitable for jigs and fixtures where downward clamping action is required. What is the arm length and overall mass of the clamp? The clamp features a 100 mm holding arm and weighs approximately 0.809 kg, facilitating compact fixture design without excessive mass. Is the finish suitable for workshop environments? The product is supplied with a blackened burnished finish, offering a robust surface condition for industrial use and easy visual integration into fixtures. Which SKU and identifiers should be used for ordering and documentation? Use article number B212-4-D-C1 and GTIN 8682843522332 for ordering and inventory records. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Vertical Clamp With Safety Lock, 1.5 kN Thrust / 5 kN Holding Force, Blackened - Kukamet
Reliable clamping for vertical fixtures: combines a holding force of up to 5,000 N, a pressing force of 1,500 N and a compact 1.25 kg design for straightforward integration into jigs and fixtures. Order the 224 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 224 Vertical Clamp by Kukamet — vertical foot, safety locking The 224 vertical clamp is a lever clamp for secure vertical mounting, offering repeatable workholding for workshop fixtures and small production runs. Vertical foot mounting Integrated safety locking Holding force up to 5,000 N Robust blackened finish Secure, repeatable clamping for production The clamp delivers dependable clamping performance through a combination of sturdy mechanics and a positive safety locking mechanism that prevents unintended release during machining or handling. Designed as a lever clamp, it converts operator input into a reliable hold, producing a holding force of 5,000 N for stable fixation of components. This level of clamping reduces rework and aligns with production demands where consistent part location and repeatability are essential. Engineered for efficiency and operator safety A geared balance between clamping power and ergonomic operation is achieved by the lever design and integrated lock. The 1,500 N pressing force provides strong contact pressure without excessive operator effort, while the safety lock secures the clamp once engaged, supporting safe, unattended cycles where repeatability matters. The compact mechanism minimises footprint on fixtures and contributes to quicker set-ups and faster changeovers in busy workshops. Compact construction and corrosion-resistant finish At 1.25 kg the clamp is lightweight enough for fixture integration yet robust for daily industrial use. The blackened finish offers surface protection and a professional appearance while damping minor abrasions. The clamp’s geometry supports installation on a vertical foot mounting, with a working angle of 100° that suits typical vertical clamping arrangements. These design choices combine to keep assemblies compact, durable and straightforward to maintain over long production runs. Discuss the Kukamet 224 vertical clamp with Metav Werkzeuge for tailored workshop integration or request detailed technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 224-4-L GTIN: 8682843520567 Manufacturer: Kukamet Facts Weight: 1.25 kg Holding force: 5,000 N Pressing force: 1,500 N Angle: 100° eClass: 21041717 ETIM: EC011973 Special features Material: blackened finish Mounting: vertical foot Safety locking: integrated Design: lever clamp FAQ What clamping force can be expected from this clamp? The clamp provides a holding force of up to 5,000 N and a pressing force of 1,500 N, making the Kukamet 224 suitable for demanding fixture applications. How is the 224 mounted to a fixture? Mounting is designed for a vertical foot arrangement; the clamp attaches to a vertical surface or base plate to secure parts in an upright orientation. Does the clamp include a locking mechanism? Yes, the 224 features an integrated safety locking device that secures the lever once engaged, preventing accidental release during machining. Is the surface treated for resistance to wear and corrosion? The clamp is supplied with a blackened finish that protects against minor wear and provides a low-maintenance surface suitable for workshop environments. Is the clamp suitable for frequent cycle changes in production? The lever clamp design and compact mass support rapid set-ups and repeatable operation, making it appropriate for frequent changeovers in small-series production. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp With Safety Lock, 1.5kN Thrust, 5kN Hold Force, Blackened - Kukamet
Take advantage of the combination of compact design, high retention force and a secure safety lock to speed up fixture cycles without compromising on workplace safety. Order the clamp direct from Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 242 – Vertical toggle clamp with safety lock, 1,500 N clamping force (Kukamet) The Vertikalspanner 242 is a vertical toggle clamp designed for secure, repeatable holding in jig and fixture applications across metalworking and assembly stations Vertical base foot for stable mounting Safety lock prevents unintended release 1,500 N clamping force for firm hold Holds up to 5,000 N retention force Consistent holding power for production environments The clamp delivers a clear performance advantage through its 1,500 N rated clamping capability combined with a 5,000 N maximum retention force. This ratio of clamping to holding force provides a secure grip on parts during machining or assembly, reducing rework and stoppages. The mechanism locks positively, so the safety lock maintains engagement under vibration and intermittent loads. For production planners the result is a measurable improvement in process stability and fewer manual interventions. Robust construction that speeds up cycle times A compact, blackened finish body and a vertical base mounting allow rapid integration into existing fixtures while offering corrosion-resistant surface protection. The lever-driven action of this type of clamp shortens the motion path, enabling quicker part securing and release compared with multi-component systems. At a lightweight 1.47 kg the unit is easy to position during jig building yet substantial enough to withstand repeated cycles, supporting higher throughput without adding bulk to the fixture. Safety and installation advantages for workshop fixtures Designed as a classic lever clamp, the device opens to a 100° travel angle, giving good access for loading and unloading components while maintaining a compact footprint. The integrated safety lock prevents accidental opening, which is beneficial where unattended machines or automated feeders are in use. Clear mechanical behaviour and straightforward mounting on a vertical foot make it suitable for clamping, assembly and testing fixtures where repeatability and operator safety are priorities. The model is supplied as a single, ready-to-install clamp with a defined SKU for traceability. Contact Metav Werkzeuge for tailored technical advice and to specify the Kukamet Vertikalspanner 242 (SKU 242-4-L) for reliable fixture integration in your workshop Technical data Article number: 242-4-L GTIN: 8680731505696 SKU: 242-4-L Facts Weight: 1.47 kg Max clamping force: 1,500 N Max holding force: 5,000 N Angle: 100° Special features Material: blackened finish Mounting: vertical base foot Safety lock: yes Category: Spanner eClass: 21041717 ETIM: EC011973 FAQ What is the primary application for this vertical clamp? The Vertikalspanner 242 from Kukamet is intended for use in jigs, fixtures and assembly fixtures where secure, repeatable clamping and compact mounting are required. Can the clamp be mounted on production fixtures with limited space? Yes. The vertical base foot and compact design of the Vertikalspanner 242 (SKU 242-4-L) allow straightforward installation in confined fixture layouts. How does the safety lock improve workshop safety? The integrated safety lock prevents unintended release under vibration or incidental impact, so the clamp keeps a positive hold until deliberately released. Is the lever action suitable for high-cycle automation? The lever-driven mechanism offers short actuation and reliable engagement, making this model suitable for higher cycle rates in manual or semi-automated processes. What finish does the clamp have and what does it mean for maintenance? The unit features a blackened finish that provides basic surface protection; this reduces the need for frequent touch-up while supporting standard workshop maintenance routines. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Vertical Clamp With Solid Holding Arm, 3,300 N Clamping Force, Galvanised - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a massive 100 mm holding arm with up to 3,300 N holding force to secure workpieces reliably in repetitive operations. Order the unit via Metav Werkzeuge or contact their consultants for application advice and supply reliability. Vertikalspanner 212 – Vertical clamp with 100 mm arm, galvanised (Kukamet) The Vertikalspanner 212 is a vertical clamp engineered for secure fixture tasks in workshops and light industrial settings, offering a robust holding arm and stable vertical-foot mounting for compact machine tables and benches. Massive 100 mm holding arm Galvanised steel construction Max. holding force 3,300 N Vertical-foot mounting for stability Secure clamping that speeds production cycles A short, powerful clamping device reduces handling time and keeps cycles predictable. The unit’s 3,000 N operating force and 3,300 N holding force mean workpieces remain immobile during machining and assembly, lowering rework rates. In practice, these force values indicate the maximum press and retention capacity measured in newtons, which translates into clear decision criteria for fixture planning and process reliability. The compact mass and firm design help maintain repeatability across many cycles. Compact mounting for stable setups Designed with a vertical-foot mounting, the clamp integrates neatly into machine tables, jigs or inspection benches where height and footprint matter. The galvanised finish protects against corrosion in workshop environments and simplifies maintenance routines by reducing the need for frequent surface care. At a weight of 0.809 kg, the device is easy to position during installation yet contributes meaningful holding power once secured, supporting tidy, space-efficient workstations. Robust construction for everyday workshop use The massive holding arm and simple mechanical principle make the unit suitable for repetitive clamping tasks where reliability is essential. The construction focuses on low-maintenance durability: galvanised components resist environmental wear and the solid arm minimises flex under load, helping to preserve clamping geometry over time. This combination of sturdy design and predictable performance supports process stability in production and repair contexts. For dependable fixture performance, source the Kukamet 212 vertical clamp through Metav Werkzeuge—Metav’s technical advisors are available at info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability for specific applications Technical data SKU: 212-4-D-C1 GTIN: 8680731501674 eCl@ss: 21041717 ETIM: EC011973 Facts Weight: 0.809 kg Arm length: 100 mm Max. operating force: 3,000 N Max. holding force: 3,300 N Special features Galvanised construction Vertical-foot mounting Massive holding arm Category: Spanner Manufacturer: Kukamet FAQ What maximum holding force does the Vertikalspanner 212 provide? The Vertikalspanner 212 offers a maximum holding force of 3,300 N, suitable for many light industrial clamping tasks. What is the operating (pressing) force of the clamp? The device is rated for a maximum operating force of 3,000 N, indicating the peak press load the mechanism is designed to apply. How is the 212 fixed to a workbench or machine table? The clamp uses a vertical-foot mounting that provides stable attachment on machine tables, fixture plates or benches. Is the surface treatment suitable for workshop environments? Yes, the galvanised finish provides corrosion resistance appropriate for typical workshop conditions, reducing surface maintenance. Which SKU should be referenced when ordering or requesting documentation? Reference SKU 212-4-D-C1 for ordering, spare parts enquiries or technical documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp 130mm Arm, 2,000N Thrust, 6,000N Holding Force, Massive Arm & Safety Lock - Kukamet
Take advantage of the combination of robust clamping mechanics, a massive holding arm and a compact 130 mm reach to secure small to medium workpieces reliably. Order the vertical clamp directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertical clamp 241 — vertical lever clamp with 130 mm arm and 6,000 N holding force (Kukamet) The Vertical clamp 241 is a vertical lever clamp designed for secure workholding in machining, assembly and fixture applications where repeatable clamping and quick operation are required. Massive holding arm and safety lock 130 mm lever arm for extended reach Horizontal-foot mounting for stable installation Holding force 6,000 N; actuation force 2,000 N Predictable clamping performance for reliable production The vertical lever design delivers consistent clamping with defined opening and closing movement that reduces setup time in series work. The combination of an engineered lever mechanism and a massive holding arm ensures a high safety margin for fixture tasks; holding force and actuation force specifications are clearly defined to support process planning. The robust kinematics of the clamp make it suitable for repetitive cycles, allowing a steady production rhythm and minimising rework caused by shifting workpieces. Simple installation that matches existing jigs and fixtures Engineered for workshop compatibility, the clamp features a horizontal-foot mounting which permits direct bolting to plates or subframes used in machining fixtures and jigs. The 130 mm lever arm provides extended reach while keeping the overall footprint compact, enabling use in constrained setups. The nominal angle of 100° indicates the operating travel and helps when aligning fixtures; this information aids in evaluating clearance and interaction with other tooling components. Built to endure daily workshop use Constructed with a durable blackened finish, the clamp resists wear in standard workshop environments and preserves precise motion over time. The integrated safety lock secures the lever in the clamped position, reducing the risk of accidental release during handling or transport of assemblies. With a product mass of 2.402 kg the unit balances rigidity with manageable weight for fixture assemblies and transport between workstations. The mechanical simplicity supports maintenance and long service intervals, providing a dependable workholding solution. Contact Metav Werkzeuge for fitting advice or to request a quotation for the Kukamet Vertical clamp 241 and ensure the selected clamp meets specific fixture requirements. Technical data SKU: 241-6-D-L-C2 GTIN: 8682843520710 Brand: Kukamet Facts Arm length: 130 mm Angle: 100° Actuation force (max): 2,000 N Holding force (max): 6,000 N Weight: 2.402 kg Special features Vertical lever clamp type Horizontal-foot mounting Massive holding arm and safety lock Blackened finish FAQ How much clamping force does the vertical clamp provide? The Vertical clamp 241 offers a maximum holding force of 6,000 N with an actuation force of 2,000 N, suitable for a wide range of fixture tasks. Is the clamp suitable for bolting directly to a fixture plate? Yes, the clamp’s horizontal-foot mounting allows direct bolting to plate-mounted jigs and subframes commonly used in machining fixtures. What is the effective reach of the lever arm? The lever provides a 130 mm arm length, giving extended reach for workpieces while keeping the unit compact for dense fixture arrangements. Does the clamp include a locking device for transport or handling? The unit features an integrated safety lock that secures the lever in the clamped position to prevent accidental release. What finish and durability can be expected in workshop environments? The clamp is supplied with a blackened finish designed to withstand typical workshop wear and preserve consistent motion over prolonged use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp 2000 N Actuation, Three-Point Massive Arm Safety Lock, Black Oxide Finish - Kukamet
Take advantage of the combination of high holding force, a compact 130 mm arm and a secure safety lock for reliable, repeatable workholding. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. 242 Vertical clamp (Kukamet) — 130 mm arm, 6,000 N holding force 242 Vertical clamp is a vertical toggle clamp designed for secure workholding in metalworking, fabrication and general workshop fixtures, offering high holding force and robust construction for demanding production tasks. Massive holding arm with safety lock 6,000 N maximum holding force 130 mm robust clamping arm Blackened finish for corrosion resistance Secure workholding for demanding operations The vertical toggle clamp provides 6,000 N holding force paired with a 2,000 N clamping force, delivering stable retention even under heavy machining or pressing operations. The solid holding arm and integrated safety lock reduce the risk of accidental release during secondary operations, supporting continuous production runs with fewer interruptions. The clamp’s vertical mounting foot allows straightforward integration into jigs and fixtures, while the 100° opening angle offers working clearance that balances access with secure engagement. Compact design that saves space without sacrificing strength With a 130 mm arm and a compact footprint, the unit occupies little bench or fixture space while still providing substantial mechanical advantage. The clamp’s overall mass and blackened finish contribute to durability and resistance to everyday workshop wear. At approximately 2.402 kg, the device is easy to position during assembly of fixturing systems yet heavy enough to remain stable once mounted. The combination of compact dimensions and high holding values supports denser tooling layouts and efficient shop-floor use. Robust construction that supports consistency and safety Machined components and a massive holding arm ensure long-term dimensional stability and repeatable clamping behaviour, which reduces rework and saves setup time. The safety locking mechanism keeps the clamping element secured when engaged, offering an added layer of process safety for manual and semi-automated workflows. These design features make the clamp suitable for repeated cycles in production environments where consistency and operator confidence are essential. Choose the Kukamet 242 vertical clamp for dependable high-force workholding and contact Metav Werkzeuge for tailored ordering information and application guidance. Technical data SKU: 242-6-D-L-C2 GTIN: 8682843520888 Article number: 242 Manufacturer: Kukamet Weight: 2.402 kg Core data Arm length: 130 mm Maximum holding force: 6,000 N Maximum clamping/pressing force: 2,000 N Opening angle: 100° Mounting type: vertical foot Finish: blackened Features & materials Massive holding arm Safety locking mechanism Robust construction for fixture integration Suitable for industrial workshop use FAQ What is the maximum holding force of the clamp? The Kukamet 242 vertical clamp provides a maximum holding force of 6,000 N, with a separate clamping/pressing capacity of 2,000 N for securing workpieces. How is the clamp mounted to a fixture? Mounting is via a vertical foot, allowing the unit to be bolted directly to jigs, base plates or bench fixtures for stable integration. Is the clamp suitable for repeated production cycles? Yes, the 242 is designed with a massive holding arm and robust construction to ensure repeatable clamping behaviour across many cycles. What finish does the clamp have and why does it matter? The clamp has a blackened finish, which improves surface resistance to corrosion and reduces visible wear in workshop environments. What are the physical dimensions and weight to consider for fixture design? The clamping arm is 130 mm long and the unit weighs approximately 2.402 kg, values useful for planning fixture layout and load-bearing capacity. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp 86mm Arm Massive Holding Arm With Safety Lock, 2000N Closing Force 6000N Holding Force - Kukamet
Take advantage of the combination of a massive holding arm, 6,000 N holding force and a secure safety lock to keep workpieces immobile during machining; order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. Vertikalspanner 242 – vertical clamp with 6,000 N holding force and safety lock (Kukamet) The Vertikalspanner 242 is a heavy-duty vertical clamp designed for precise workholding in machining and assembly tasks. Massive holding arm and safety lock 6,000 N holding force for secure retention 86 mm arm length for compact applications Vertical-foot mounting for stable set-up Secure high-force retention minimises rework and cycle time This vertical workholding solution delivers a clear technical advantage: a holding force of 6,000 N combined with a clamping force of 2,000 N, which separates the functions of retention and operative clamping. The distinction matters in production: the higher holding force keeps the component stationary during secondary operations, while the clamping force provides reliable actuation during the clamp cycle. Built around a massive holding arm and a proven locking mechanism, the unit reduces vibration and movement that cause rejects, improving process reliability and repeatability. Stable positioning and compact footprint for dense fixturing The clamping element is fitted to a vertical foot for straight-down mounting and an 86 mm arm that balances reach with a small footprint. A 100° working angle gives versatile clamp travel while the assembly weight of 2.278 kg provides stability without unnecessary mass. The compact dimensions make the clamp suitable for tightly packed fixtures and multi-station jigs, enabling efficient use of table space and simpler tooling layouts. The blackened finish resists corrosion in everyday workshop conditions and keeps visual contrast low for inspection. Enhanced safety and workshop productivity through robust design A positive safety lock prevents unintentional release, supporting safe operator routines and machine cycles. The robust build and mechanical simplicity reduce maintenance requirements and downtime compared with more complex hydraulic or pneumatic alternatives. Manufactured for repetitive industrial use, this clamp is appropriate for machining, assembly and general fixture work where reliable retention and quick manual or lever actuation are required. The design choices embedded in the clamp translate to fewer stoppages, faster set-ups and a steadier production flow. Secure the Kukamet Vertikalspanner 242 via Metav Werkzeuge for dependable, workshop-ready clamping; contact Metav Werkzeuge in Emmerich for specification support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 242-6-D-L-C1 GTIN: 8682843520871 Manufacturer: Kukamet Facts Weight: 2.278 kg Arm length: 86 mm Working angle: 100° Max clamping force: 2,000 N Max holding force: 6,000 N ECLASS: 21041717 ETIM: EC011973 Special features Mounting: vertical foot Material/finish: blackened finish Massiver Haltearm (massive holding arm) Safety lock included Category: clamp / spanner FAQ What forces does the clamp provide? The Vertikalspanner 242 offers a maximum holding force of 6,000 N and a clamping force of 2,000 N, enabling secure retention and effective clamping in one unit. How is the clamp mounted to a fixture? The unit is designed for vertical-foot mounting, allowing direct downward attachment to plates or fixture bases for compact, stable installation. Is the clamp suitable for dense fixture layouts? Yes; the 86 mm arm length and compact design make the clamp suitable for tight fixturing where space optimisation is required. Does the clamp include a safety mechanism? A positive safety lock is integrated to prevent accidental release and to support safe operation during machining cycles. Which environments is the finish suitable for? The blackened finish provides routine protection in workshop environments and reduces glare during inspection processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp Horizontal Base, Safety Lock, 7,000 N Thrust, Black Oxide - Kukamet
Take advantage of the combination of compact design, 7,000 N clamping force and an integrated safety lock for secure, repeatable fixture work; order the clamp directly via Metav Werkzeuge or consult our specialists for integration support. 221 Vertical Clamp by Kukamet — 7,000 N clamping force, safety lock The 221 Vertical Clamp is a compact lever clamp intended for secure vertical clamping in workshop fixtures and production jigs, featuring a horizontal-foot mounting for stable installation. 7,000 N clamping force Integrated safety lock Horizontal-foot mounting Blackened finish Reliable clamping where repeatability matters The 221 combines a robust clamping capacity with a compact footprint, delivering a maximum clamping force of 7,000 N in a light construction of 1.07 kg. This makes the device suitable for tight fixture arrangements where powerful, repeatable clamping is required without adding bulk. The mechanical actuation is designed to produce a consistent clamping result with each cycle, supporting efficiency and reducing time spent on re‑adjustment during serial production. Easy installation and space-saving integration A horizontal-foot mounting provides a straightforward means of attaching the clamp to tooling plates, jigs or machine tables. The fixed mounting angle of 100° offers a defined kinematic position, enabling predictable part loading and simple alignment in assembly fixtures. Because the clamp is compact and light, it can be integrated into existing setups with minimal modification, helping to shorten setup times and maintain production flow. Built-in safety and durable surface treatment The clamp is delivered with a safety lock that secures the clamping arm in the closed position, preventing accidental release under vibration or handling. The external surface is finished in a blackened finish, a wear‑resistant treatment that reduces surface reflections and contributes to long service life under workshop conditions. Routine maintenance is uncomplicated thanks to the straightforward mechanical design, which supports dependable operation across many cycles. Practical fit for workshop and production use Designed as a lever clamp for fixtures and jigs, this model is suitable for machine shops, assembly lines and toolrooms that require fast, repeatable part securing. The combination of compact dimensions, reliable locking and a defined mounting interface reduces assembly complexity and supports consistent cycle times, which in turn contributes to measurable process stability on the shop floor. Contact Metav Werkzeuge to discuss how the Kukamet 221 vertical clamp can be integrated into existing fixtures, request detailed drawings, or obtain a tailored quotation from our Emmerich team Technical data SKU: 221-4-L GTIN: 8682843520406 Manufacturer: Kukamet Key figures Max. clamping force: 7,000 N Weight: 1.07 kg Clamping angle: 100° eClass: 21041717 ETIM: EC011973 Features & materials Horizontal-foot mounting With safety lock Blackened finish Lever clamp type FAQ What maximum force does the clamp provide? The 221 vertical clamp delivers a maximum clamping force of 7,000 N for secure holding in fixtures. How is the clamp attached to a fixture? Attachment is by a horizontal-foot mounting that provides a stable, fixed interface for jig plates and tooling. Does the clamp include a safety device? Yes — the clamp is equipped with an integrated safety lock to prevent unintentional opening during operation. What is the weight and handling advantage of this clamp? Weighing 1.07 kg, the unit is lightweight yet robust, enabling easy integration into compact fixture designs without adding unnecessary mass. Is the surface finish suitable for workshop use? The clamp’s blackened finish is a durable surface treatment intended for daily workshop conditions and long service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp Three-Point With Safety Lock, Black Oxide 11,000 N - Kukamet
Combine high clamping power with a compact vertical design and an integrated safety locking mechanism for dependable workholding in fixtures and jigs. Order the vertical clamp directly via Metav Werkzeuge or consult the Metav team for selection and supply. 222-6-L Vertical toggle clamp — Vertical clamp with 11,000 N clamping force by Kukamet The 222-6-L is a vertical toggle clamp engineered for secure, repeatable workholding in industrial jigs and fixtures. 11,000 N clamping force Integrated safety locking mechanism Upright base for vertical mounting Blackened finish for surface protection Reliable high-force clamping for repeatable production The 11,000 N specification denotes a robust clamping force suitable for demanding assembly, welding and machining tasks where fixed, vibration-resistant workholding is required. The lever-actuated toggle mechanism converts operator input into a firm, locked position that maintains pressure without continuous manual effort. The built-in safety locking prevents accidental release during handling or machining, supporting consistent cycle times and reducing rework. For installers and shop managers, the advantage is clear: stable fixation that minimises part movement and improves tolerances. Compact vertical mounting that saves bench space Designed with an upright base, the clamp is intended for vertical installation on fixture plates and tooling blocks where horizontal footprint is limited. The unit’s 100° pivot provides a wide open position for easy loading and closes to a secure locked stance for processing. At approximately 2.025 kg, the assembly balances solidity with manageable mass for fixture integration. These attributes simplify retrofitting into existing work-holding setups and allow dense packing of clamps on small fixtures without compromising accessibility. Durable finish and straightforward integration into fixtures The component’s blackened finish provides surface protection against wear and mild corrosion, extending service life in workshop environments. The clamp is supplied with a vertical foot for secure mounting and a lever-style actuator that links directly into standard jigs. Installation requires common fasteners and basic alignment; once mounted, the toggle action delivers repeatable engagement and a tactile locked position. For operations seeking dependable, low-maintenance clamping, this configuration offers a pragmatic balance of robustness and simplicity. For secure, high-force clamping from Kukamet, specify the 222-6-L when contacting Metav Werkzeuge; Metav Werkzeuge in Emmerich can provide advice, product availability and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored assistance. Technical data SKU: 222-6-L GTIN: 8682843520536 Brand: Kukamet eClass: 21041717 ETIM: EC011973 Facts Maximum clamping force: 11,000 N Weight: 2.025 kg Pivot/angle: 100° Special features Vertical mounting with upright base Safety locking mechanism integrated Blackened finish Lever-operated toggle clamp Suitable for jigs and fixtures FAQ What maximum force does the clamp deliver? The clamp provides a maximum clamping force of 11,000 N, enabling firm fixation for assembly and machining operations with the 222-6-L vertical toggle clamp from Kukamet. Is the clamp suitable for vertical fixture mounting? Yes. The design features an upright base specifically for vertical mounting, making it appropriate for compact jigs and stacked fixture plates. Does the clamp include a safety mechanism to prevent accidental opening? A safety locking mechanism is integrated, which secures the clamp in the closed position and reduces the risk of unintended release during processing. What surface protection does the clamp have? The component is supplied with a blackened finish that offers wear resistance and basic corrosion protection suitable for typical workshop conditions. How heavy is the unit and how does that affect installation? The clamp weighs approximately 2.025 kg, giving it the mass required for stable workholding while remaining simple to mount into tooling plates and fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp With 118mm Arm, Massive Holding Arm And Safety Lock, 1500N Closing Force – Kukamet
Take advantage of the massive holding arm and safety locking mechanism together with a compact 118 mm reach to secure workpieces reliably under repeat production conditions; order supply and technical advice directly via Metav Werkzeuge for uninterrupted workshop use. Vertikalspanner 241 — Vertical clamp with 5,000 N holding force and horizontal foot (Kukamet) The Vertikalspanner 241 is a vertical clamp designed for secure workpiece fixation in workshop and industrial clamping systems, offering a compact footprint and robust mechanical locking for repetitive processes. Massive holding arm for stable fixation Safety locking mechanism for repeatable clamps 5,000 N holding force for heavy-duty use Secure clamping that reduces rework and downtime The Vertikalspanner 241 combines a massive holding arm with a rated holding force of 5,000 N and a clamping force of 1,500 N, delivering measurable stability for demanding jobs. The high holding force minimises micro-movement during machining or assembly, which reduces rework and improves first-pass quality. For production planners this means fewer interruptions and more consistent cycle times; the device converts mechanical specification into tangible operational reliability. Safer, faster cycles through mechanical locking A dedicated safety locking mechanism ensures the clamped position remains fixed until intentionally released, supporting repeatable operation and reducing the risk of accidental release during handling. The clamp is supplied with a horizontal foot for straightforward mounting to fixtures or machine tables, and the 100° operating angle gives a clear actuation path. These mechanical design choices favour predictable behaviour in jigs and fixtures and make integration into existing setups straightforward. Compact dimensions for flexible integration With an arm length of 118 mm and a weight of approximately 1.362 kg, the device offers a compact solution where space is restricted without compromising strength. The blackened surface finish provides a matt, corrosion-resistant appearance that is easy to maintain under workshop conditions. The short reach and moderate mass simplify retrofitting to conveyors, assembly stations or dedicated clamping plates while preserving the high clamping and holding performance required in repetitive manufacturing. For dependable clamping in series production, specify the Kukamet Vertikalspanner 241 via Metav Werkzeuge and request supply or integration advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: 241-4-D-L-C2 GTIN: 8682843520642 eClass: 21041717 ETIM: EC011973 Facts Arm length: 118 mm Clamping force, max: 1,500 N Holding force, max: 5,000 N Angle: 100° Weight: 1.362 kg Special features Horizontal foot mounting Massive holding arm Safety locking mechanism Material finish: blackened Category: Spanner FAQ What holding and clamping forces does the device provide? The Vertikalspanner 241 offers a holding force of 5,000 N and a clamping force of 1,500 N, making it suitable for robust fixture applications where secure retention is essential. Can the clamp be mounted to existing fixture plates? Yes, the unit is designed with a horizontal foot for direct mounting to fixture plates or machine tables, enabling simple integration into existing clamping solutions. Is a safety lock included and how does it help? The clamp features a safety locking mechanism that secures the clamped position until intentionally released, improving repeatability and reducing the risk of unintended opening during handling. What are the dimensions relevant for layout planning? Key dimensions are an arm length of 118 mm and an overall weight of about 1.362 kg; these figures help assess available space and load capacity for retrofitting. What surface finish and material appearance should be expected? The device is supplied with a blackened finish that provides a matt, workshop-suitable surface with improved resistance to corrosion and wear over plain steel. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp With 1500 N Thrust, Massive Holding Arm & Safety Lock, Blackened - Kukamet
Robust vertical clamping with a solid holding arm, integrated safety lock and clear force ratings ensures reliable fixture performance; benefit from precise, repeatable operation and durable blackened finish. Order the Kukamet 242 vertical toggle clamp directly via Metav Werkzeuge or consult our specialists if technical advice is required. 242 Vertical Toggle Clamp (Vertical Mount) — 1,500 N clamping force, solid holding arm — Kukamet The 242 is a vertical toggle clamp intended for secure vertical mounting in jigs and fixtures, combining a long, robust arm with an integrated safety locking mechanism for stable workpiece retention. Solid 168 mm holding arm Integrated safety locking Max clamping force 1,500 N Max holding capacity 5,000 N Consistent clamping performance for serial production The clamp delivers a defined max clamping force of 1,500 N and a holding capacity of 5,000 N, values that support reliable fixation under cyclical loads. Specified force figures allow planners to size fixtures accurately and to predict repeatability across batches. The 100° operating angle stabilises the toggle action, while the substantial arm length contributes to an extended lever for accessible clamping positions. These measurable attributes translate directly into fewer reworks and steadier process control on assembly lines or in machining fixtures. Built for repeatability and operator safety Constructed with a solid holding arm and an integrated safety locking device, the clamp reduces the risk of unintentional release during handling or vibration. The blackened finish offers surface protection and a low-reflective appearance suited to workshop environments. With a mass of approximately 1.456 kg, the component balances robustness and manageable handling during fixture mounting. The combination of mechanical locking and sturdy construction supports long service intervals and dependable performance in repetitive production tasks. Simple vertical mounting and straightforward integration Designed for vertical foot mounting, the unit fits directly onto plates and subframes where vertical actuation is required. The clamp’s geometry and mounting arrangement simplify alignment within jigs, shortening setup time and enabling consistent reference positions. Labelled with SKU 242-4-D-L-C3 for inventory control, the device integrates seamlessly into modular tooling systems and standard fixture plates, allowing planners to harmonise clamping points across multiple workstations without complex adaptations. For specification support or ordering of the Kukamet 242 vertical toggle clamp, contact Metav Werkzeuge in Emmerich for detailed product advice and delivery information: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 242-4-D-L-C3 GTIN: 8682843523780 Manufacturer: Kukamet Core specifications Arm length: 168 mm Operating angle: 100° Max clamping force: 1,500 N Max holding capacity: 5,000 N Weight: 1.456 kg Special features Finish: blackened Mounting: vertical foot Solid holding arm Safety locking mechanism Model type: vertical toggle clamp FAQ What maximum clamping and holding forces does the clamp provide? The Kukamet 242 vertical toggle clamp offers a maximum clamping force of 1,500 N and a holding capacity of 5,000 N, providing clear parameters for fixture design and load assessment. Is the clamp suitable for vertical mounting in jigs and fixtures? Yes. The device is configured for vertical foot mounting and a 100° operating angle, making it suitable for integration into vertically actuated fixtures. What materials and finish are used? The clamp features a blackened finish, providing surface protection and a subdued appearance appropriate for workshop use. Does the unit include a safety lock for unattended operations? An integrated safety locking mechanism is provided to prevent accidental release during vibration or handling, supporting safer repetitive work cycles. How is the clamp identified for ordering and inventory? The product is listed under SKU 242-4-D-L-C3 and GTIN 8682843523780 for procurement and stock-keeping purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp With 5000N Holding Arm, 1500N Thrust, Safety Lock - Kukamet
The combination of a 5,000 N holding arm, a secure safety lock and a compact horizontal mounting makes this vertical clamp a reliable choice for repeatable clamping operations; benefit from consistent workpiece retention and straightforward installation. Order the clamp directly via Metav Werkzeuge or consult our advisers for specification support. Vertikalspanner 222-4-C-L vertical clamp with 5,000 N holding arm — Kukamet The Vertikalspanner 222-4-C-L is a vertical clamp engineered for secure workpiece fixation in machining and assembly settings, offering a high holding capacity and a safety locking mechanism for safe, repeatable operation 5,000 N holding arm force Integrated safety lock Compact 1.31 kg body Horizontal base with 100° angle Reliable retention that reduces rework A solid holding force of 5,000 N gives the clamping device the capacity to keep workpieces secure under lateral and lifting loads, which reduces re-fixturing and scrap. The incorporated safety lock prevents unintentional release during machining cycles, increasing process reliability and operator confidence. For production environments where repeatability matters, the combination of robust retention and a mechanical lock translates into fewer interruptions and more consistent throughput. Space-saving mounting with flexible positioning Designed with a horizontal base, the clamp mounts neatly to fixtures and machine tables, permitting compact integration into existing jigs. The 100° angle offers practical clearance for levers while keeping the footprint small. At only 1.31 kg, the unit is light enough for retrofit installations and for use in modular clamping setups, yet sturdy in function. This makes the device suitable for tight workstations and fixtures where conserving space without compromising clamping performance is essential. Efficient operation and workshop durability The clamp delivers a 1,500 N pressing force, a parameter that describes the actual clamping pressure applied to the workpiece; this value is balanced to provide firm contact without overstressing delicate parts. The lever clamp action gives fast cycle times and ergonomic handling, supporting higher productivity on repetitive tasks. A blackened finish adds basic surface protection against wear and handling marks. The Vertikalspanner 222-4-C-L combines quick operation with long-term consistency, making it a pragmatic choice for assembly, light machining and inspection fixtures Choose Kukamet quality and the 5,000 N holding arm — contact Metav Werkzeuge for specification support and procurement at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 222-4-C-L GTIN: 8682843520499 eClass: 21041717 ETIM: EC011973 Manufacturer: Kukamet Facts Weight: 1.31 kg Holding force (max): 5,000 N Pressing force (max): 1,500 N Angle: 100° Special features Horizontal base Hold arm with 5,000 N holding force Safety locking mechanism Blackened finish FAQ How is the clamp mounted and aligned? The clamp is fixed via the horizontal base; the compact design enables direct attachment to fixtures and machine tables and alignment is achieved by positioning the base and securing with fixture fasteners. What safety features prevent accidental release? A mechanical safety lock secures the hold arm in the clamped position; this locking function is integral to the design and prevents unintended opening during handling or machining. What do holding force and pressing force mean for application design? Holding force (5,000 N) indicates maximum static retention capacity; pressing force (1,500 N) describes the clamping pressure applied to the workpiece. Use these values when calculating fixture loads and workpiece contact requirements for the Vertikalspanner 222-4-C-L. Is the clamp suitable for retrofitting into existing jigs? Yes. The compact weight (1.31 kg) and horizontal base make the device suitable for retrofit applications and modular fixturing where space and weight considerations are important. What surface protection does the clamp have? The clamp is supplied with a blackened finish, providing resistance to handling wear and a uniform appearance appropriate for workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp With 6000N Holding Arm, 2000N Thrust, Safety Lock - Kukamet
Take advantage of the combination of 6000 N holding arm, 2,000 N clamping force and a compact, horizontal mounting for reliable fixture security in repetitive production. Order the vertical toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. 221-6-C-L Vertical toggle clamp by Kukamet — 6,000 N holding arm and safety lock 221-6-C-L is a vertical toggle clamp designed for fixed‑position fixturing and repetitive assembly tasks, offering firm retention and integrated safety for industrial use. 6000 N holding arm with safety lock 2,000 N clamping force for firm fixation Horizontal base for secure installation Black blued finish, robust corrosion resistance Secure, reproducible clamping for production environments The clamp delivers a consistent clamping force that supports repeatable production results. With a holding arm rated at 6000 N and a defined clamping force of 2,000 N, the device secures workpieces during machining, welding or assembly operations, reducing rework and downtime. The mechanical design converts lever motion into reliable retention, making the component suitable for jigs and fixtures where process stability is essential. The specification supports planners seeking measurable performance and predictable outcomes in small to medium series production. Integrated safety features protect parts and operators A safety lock is fitted to prevent unintended release once the clamp is engaged, which improves operator safety and safeguards delicate components. The clamp’s lever mechanism includes a positive locking position that resists vibration and shock; this is particularly relevant for dynamic shopfloor conditions. The roughly 100° operating angle provides a clear open and closed position, simplifying visual inspection and reducing the likelihood of incorrect engagement during cycle changes. This combination of features enhances process reliability and contributes to a safer working environment. Compact format for flexible bench and fixture mounting Engineered with a horizontal base and a compact footprint, the clamp integrates into fixtures with minimal space demand while maintaining a robust mounting surface. The unit’s black blued finish offers enhanced surface protection and a professional appearance suited to industrial settings. At approximately 2.34 kg, the clamp balances solidity with ease of handling during fixture assembly. Its lever‑style operation facilitates quick manual clamping without additional tooling, enabling rapid set‑up changes and improved workflow efficiency on assembly lines and testing stations. For secure fixturing solutions, contact Metav Werkzeuge to discuss the Kukamet 221-6-C-L vertical toggle clamp and receive tailored advice from our technical team in Emmerich. Technical data SKU: 221-6-C-L GTIN: 8682843520437 Manufacturer: Kukamet Facts Holding force: 6000 N Clamping force (max): 2,000 N Weight: 2.34 kg Operating angle: 100° EClass: 21041717 ETIM: EC011973 Special features Horizontal base (waagerechter Fuß) Black blued finish (Schwarz brüniert) Safety lock fitted (Sicherheitsverriegelung) Lever‑style vertical toggle clamp design Holding arm with 6000 N holding capacity FAQ What clamping and holding forces does this clamp provide? The Kukamet vertical toggle clamp (SKU 221-6-C-L) offers a holding arm capacity of 6000 N and a maximum clamping force of 2,000 N, giving clear numerical guidance for fixture design. Is the clamp suitable for vibration-prone environments? Yes, the clamp’s integrated safety lock and positive lever engagement make the Kukamet 221-6-C-L suitable for applications where vibration or shock could otherwise cause unintended release. How is the clamp mounted to a fixture? The unit is supplied with a horizontal base for secure installation; the compact footprint supports straightforward bolt mounting into jigs and fixture plates. What surface protection does the clamp feature? The clamp is finished in a black blued surface treatment, providing improved resistance to corrosion and a durable industrial appearance. Can the clamp be used for repetitive manual operations? Designed as a lever‑style vertical toggle clamp, the 221-6-C-L is optimised for manual, repetitive clamping tasks in assembly and testing stations and supports quick engagement and release. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp With Massive Holding Arm, 1500 N Thrust, 5000 N Hold Force - Kukamet
Take advantage of a compact, high‑force clamping solution that combines a sturdy 168 mm holding arm, a 5,000 N maximum holding capability and a secure safety lock for reliable fixture work. Order the clamp directly via Metav Werkzeuge or request further technical clarification from our consultants for seamless integration into jigs and production setups. Kukamet Vertical Clamp 241 — horizontal base, 168 mm arm, 1,500 N pressing force The 241 vertical clamp is a vertical clamping device intended for fixture and machining tasks where a compact footprint and dependable hold are required. Solid 168 mm holding arm for stable clamping Horizontal base for secure bench mounting 1,500 N pressing force for precise operation Integrated safety lock for operator protection Consistent, measurable clamping performance for production use The vertical clamp delivers quantifiable results: a 5,000 N holding force paired with a 1,500 N pressing force ensures repeatable workholding during machining, assembly and testing sequences. The 168 mm arm provides reach without excessive overhang, enabling secure contact with workpieces while maintaining tool‑clearance. The horizontal base facilitates rigid bench or fixture mounting, reducing vibration and minimising setup variability. These technical characteristics support predictable cycle times and lower scrap rates in series production. Robust engineering that reduces downtime and improves safety Constructed with a black blued finish and a massive holding arm, the mechanism resists wear in routine shop environments and keeps adjustments stable over long runs. The integrated safety lock prevents accidental release during loading and transport, while a 100° opening angle allows fast part insertion and removal on jigged assemblies. At a net weight of 1.456 kg the unit combines solidity with ease of handling for assembly‑line tool changers or manual fixtures, delivering durability without unnecessary bulk. Practical benefits for jigs, fixtures and small production cells The clamp’s compact dimensions and straightforward mounting make it suitable for dedicated jigs, test rigs and machining fixtures where space is at a premium but holding must not be compromised. The clamping device supports consistent positioning and reduced rework, contributing to higher first‑pass yields and lower throughput variability. Technical buyers gain the advantage of a standardised component that integrates into existing setups, simplifying spare‑parts lists and maintenance schedules while enabling stable process control. For reliable, repeatable clamping choose the Kukamet vertical clamp 241 and arrange supply or tailored technical advice via Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 241-4-D-L-C3 GTIN: 8680731508994 Brand: Kukamet Model: 241 Facts Arm length: 168 mm Weight: 1.456 kg Pressing force max: 1,500 N Holding force max: 5,000 N Opening angle: 100° Special features Material / finish: black blued finish Mounting: horizontal foot for bench mounting Design: massive holding arm Safety: integrated safety lock FAQ What are the maximum holding and pressing forces? The Kukamet vertical clamp 241 provides a holding force of 5,000 N and a pressing force of 1,500 N, specified for stable fixture retention. How is the clamp mounted in a fixture? Mounting is via a horizontal foot intended for secure bench or jig attachment, facilitating rigid bench mounting and straightforward integration. Which design features enhance operator safety? The 241 features a massive holding arm and an integrated safety lock that prevents unintended release during loading and handling. What size reach does the clamp offer? The clamping arm has a reach of 168 mm, balancing access to the workpiece with compact installation requirements. Is the clamp suitable for production jigs and small series? Yes; the compact footprint, predictable clamping forces and robust finish make the clamp well suited to jigs, fixtures and small production cells where repeatability is essential. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100° Vertical Clamp With Massive Holding Arm, Safety Lock, 1,500 N Thrust, 5,000 N Hold - Kukamet
Take advantage of the combination of a massive 118 mm holding arm, a reliable safety locking mechanism and a compact vertical base for consistent fixture clamping; order the Kukamet unit directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 242 – Vertical lever clamp with 118 mm arm and 5,000 N holding force (Kukamet) The Vertikalspanner 242 is a vertical lever clamp designed to provide secure, repeatable clamping in jigs, fixtures and assembly stations within production and workshop environments. Solid 118 mm holding arm Safety locking mechanism Vertical base mounting 5,000 N maximum clamping force Consistent clamping force for productive setups The clamp delivers clearly defined forces: 5,000 N maximum holding force and 1,500 N pressing force, values that support repeatable part fixation in small-series production or repair work. These measurable figures enable planners to size fixturing with confidence, linking expected process stability directly to the clamp’s capacity. The numeric specification simplifies comparisons with other clamping elements and helps reduce rework caused by insufficient clamp performance. Robust construction that shortens setup times A massive holding arm and safety lock reduce the need for frequent adjustments and prevent unintentional release during machining or handling. The unit’s blackened finish protects against wear while offering a uniform appearance in toolrooms and on shop floors. At 118 mm reach and 100° operating angle the design balances accessibility and clearance, so fixtures can be loaded and unloaded quickly without compromising stability. Compact mounting and straightforward function Mounting on a vertical base provides a small footprint and straightforward installation into plates or tooling blocks. The lever mechanism is simple to operate and the integrated safety lock holds the lever in its clamped position until deliberately released, improving process safety. With a unit mass of 1.362 kg, the clamp is robust yet manageable for retrofitting into existing fixtures or building new assemblies without heavy handling equipment. Suitable applications and workshop benefits Engineered for jigs, assembly stations and light machining tasks, this vertical lever clamp is well suited to metalworking and general workshop use where reliable repeatability matters. The combination of precise clamping forces and the massive arm design reduces vibration and movement of the workpiece, contributing to better machining results and fewer rejects. Procurement and production planners will value the predictable performance when standardising fixture hardware across multiple stations. Contact Metav Werkzeuge for tailored application advice and fast supply from Emmerich—discuss the Kukamet Vertikalspanner 242 (SKU 242-4-D-L-C2) with our specialists via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Product details SKU: 242-4-D-L-C2 GTIN: 8680731509168 Brand: Kukamet eCl@ss: 21041717 ETIM: EC011973 Key specifications Arm length: 118 mm Maximum holding force: 5,000 N Maximum pressing force: 1,500 N Operating angle: 100° Weight: 1.362 kg Features & materials Mounting type: vertical base Finish: blackened (brünniert) Massive holding arm Safety locking mechanism FAQ What is the difference between the holding force and the pressing force? The holding force denotes the maximum static retention capability (5,000 N) while the pressing force (1,500 N) refers to the clamping action applied by the lever; these values for the Kukamet Vertikalspanner 242 indicate strong retention with controlled actuation. Can the clamp be mounted directly into a fixture plate? Yes, the vertical base mounting allows direct installation into plates or tooling blocks for stable integration in jigs and assemblies. Is the safety lock suitable for machining applications? The integrated safety locking mechanism prevents accidental opening during handling and light machining, improving operational safety for production and workshop tasks. What materials and finishes are used? The unit features a blackened finish and a massive arm construction designed for wear resistance and long service life in workshop environments. Is the clamp suitable for automated handling or do adjustments require manual intervention? The lever clamp operates manually; its robust construction and safety lock make it suitable for repetitive manual cycles and integration into semi-automated stations where manual clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com