Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
1200 N Vertical Clamping Toggle Clamp With 158mm Arm, Zinc Plated, Massive Arm & Safety Lock - Kukamet
Compact galvanised construction with a 1,400 N maximum holding force and an integrated safety lock delivers repeatable, secure clamping for jigs and fixtures. Combine robust performance, low weight and simple mounting for efficient production flow — order the vertical toggle clamp 213 via Metav Werkzeuge or ask our consultants for application advice. Vertical toggle clamp 213 — galvanised, 1,400 N holding force (Kukamet) A Vertical toggle clamp 213 designed for secure vertical clamping on fixtures and jigs, ready for angled-foot mounting in demanding workshop and assembly environments Robust galvanised steel construction 1,400 N maximum holding force Massive holding arm with safety lock Angled foot for secure mounting Consistent clamping that reduces rework and downtime The combination of a 1,400 N holding force and a 1,200 N pressing rating ensures reliable retention of workpieces during machining, welding and assembly. The toggle-style mechanism converts operator input into high clamping stability, reducing part movement and resulting in fewer rejects and less rework. This performance-oriented design supports efficient production sequences and shorter cycle times by maintaining repeatable fixture positioning, which is particularly valuable where consistent tolerances are required. Space-efficient design for quick integration into fixtures With a 158 mm arm and a compact footprint, the clamp integrates easily into bespoke jigs or standard fixtures without adding unnecessary bulk. The galvanised finish provides basic corrosion resistance, making the component suitable for workshop atmospheres and light industrial environments. At just 0.24 kg, the clamp is lightweight enough to be mounted on moveable fixtures while still providing the rigidity expected from heavier units, simplifying handling and reducing load on fixture frames. Built for durability and operator safety The massive holding arm and integrated safety lock safeguard clamped components and limit accidental release during operations that generate vibration or side loads. The angled-foot mounting provides a secure attachment point to fixture plates and baseframes, increasing shear resistance under load. Constructed for low maintenance, the mechanism requires only periodic inspection and lubrication to retain full functionality, supporting long service intervals and dependable daily use. Specify the Kukamet 213 vertical toggle clamp via Metav Werkzeuge for robust, repeatable clamping; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored selection and technical guidance Technical Data Article number: 213-2-D-L-C3 GTIN: 8680731501926 ECLASS: 21041717 ETIM: EC011973 Facts Maximum holding force: 1,400 N Maximum pressing force: 1,200 N Arm length: 158 mm Weight: 0.24 kg Special features Galvanised material Angled-foot mounting Massive holding arm Safety locking mechanism Toggle clamp type FAQ What materials can be clamped safely with this device? The vertical toggle clamp 213 secures a wide range of workpieces; the galvanised steel construction provides robust clamping for common metals and components used in jigs and fixtures. How is the clamp mounted to a fixture plate? Mounting is achieved via the angled foot supplied; the clamp fastens to a baseplate or fixture frame using standard fasteners suited to the application. Is the safety lock suitable for continuous production use? Yes, the integrated safety lock prevents unintended release during operations with vibration and intermittent loading, supporting continuous production routines. What maintenance does the clamp require to remain reliable? Periodic inspection and light lubrication of the pivot points are recommended to maintain the toggle mechanism and the locking function in long-term use. Can this clamp be used in mobile or lightweight fixtures? Given its low weight and compact dimensions, the clamp is suitable for integration into moveable fixtures and portable assemblies where secure, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Clamping Toggle Latch With Metal Handle, Horizontal Foot Mount - Kukamet
Benefit from the combination of robust stainless-steel construction, a horizontal-foot mounting for simple installation and a reliable holding force of 1,200 N for consistent clamping performance. Order the toggle latch 361 directly via Metav Werkzeuge or ask our consultants if needed. Toggle latch 361 – stainless-steel closure clamp with horizontal foot and hook (Kukamet) Toggle latch 361 is a compact stainless-steel closure clamp designed for secure fastening tasks in production, assembly and workshop fixtures where a horizontal base is required. Stainless steel construction Horizontal-foot mounting Holding force 1,200 N Metal handle with hook Proven holding performance for repetitive clamping The toggle latch delivers dependable mechanical performance thanks to a holding force of 1,200 N and a maximum pressing force of 1,000 N, values that translate into secure retention under vibration and repeated cycles. These figures make the component suitable for medium-duty fixtures and transport closures where consistent clamp force is essential. The relation between pressing and holding forces ensures that components remain fastened without overloading the actuator, supporting predictable work processes and minimising rework. Simple mounting and precise adjustment save assembly time Equipped with a horizontal foot for fixed-base attachment and a thread length of 23 mm, the clamp can be mounted and adjusted quickly on sheet frames or jig plates. The compact design and a weight of approximately 55 g make the unit unobtrusive in tight assemblies while enabling quick alignment. The integrated hook and metal handle provide positive engagement and tactile feedback during operation, reducing the need for secondary locking and simplifying operator routines on the shop floor. Corrosion-resistant material and low-maintenance operation Constructed from stainless steel, the closure clamp resists corrosion and withstands humid or mildly corrosive environments common in industrial workshops. This material choice reduces the need for frequent replacement and supports long service life, contributing to an efficient parts inventory and fewer production stops. The latch’s simple mechanical principle means only routine inspection is required; worn items are identified visually and replaced without specialised tools, keeping maintenance straightforward for engineering teams. Contact Metav Werkzeuge for technical advice on applying the Kukamet toggle latch 361 in production fixtures and to arrange delivery from our Emmerich warehouse Technical data SKU: S361-1 GTIN: 8682843523346 Manufacturer: Kukamet Facts Weight: 0.055 kg Holding force: 1,200 N Pressing force: 1,000 N Thread length: 23 mm Special features Material: stainless steel Mounting: horizontal foot Handle: metal With hook: yes eClass: 21041718 ETIM: EC011973 FAQ What is the maximum holding force of this latch? The latch provides a holding force of 1,200 N, giving reliable retention for medium-duty fastening applications. Is the latch suitable for outdoor use? Made from stainless steel, the latch resists corrosion and is suitable for environments with moderate humidity and exposure; extreme marine conditions may require additional protection. How is the latch mounted to a fixture? The latch uses a horizontal-foot mounting arrangement and a 23 mm thread length for secure fastening to jig plates or frames. Can the metal handle accommodate repeated manual operation? Yes, the metal handle is designed for repetitive use and provides positive engagement together with the integrated hook. Which SKU should be ordered for this model? Order SKU S361-1 for this specific toggle latch model Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Toggle Clamp Horizontal Base, Metal Handle, Zinc Plated, 23mm Thread Length - Kukamet
Take advantage of a compact, galvanised toggle clamp that combines a high holding force with a sturdy metal handle for reliable fixturing; order the part directly via Metav Werkzeuge or consult the Metav team for specification support. Verschlussspanner 361 – Horizontal-foot toggle clamp, galvanised (Kukamet) Verschlussspanner 361 is a durable closure clamp designed for repetitive locking and secure fixtures in workshop and light industrial applications. Horizontal-foot for firm mounting Galvanised finish for corrosion resistance Metal handle for durable operation Consistent clamping performance for repeatable processes Built for repeated use, this toggle clamp delivers measurable force values that support predictable results. With a maximum pressing force of 1000 N and a holding force of 1200 N, the device provides the technical basis for secure workholding during assembly or light machining. The horizontal base plate ensures stable mounting on jigs or fixtures, reducing slippage and aligning with common workshop setups. The mechanical action converts handle movement into firm clamping pressure, allowing quick engagement and disengagement while maintaining repeatability. Compact design that speeds up installation and handling The compact dimensions and low mass make the clamp simple to integrate into existing tooling without adding unnecessary bulk. A thread length of 23 mm permits straightforward adjustment and fine positioning of the clamping point, while the overall weight of 0.055 kg keeps the unit unobtrusive on fixtures. The built-in hook option enables flexible anchoring positions, and the horizontal-foot arrangement aligns with standard mounting holes, cutting installation time and enabling fast changeovers on production or test benches. Corrosion resistance and robust grip for long service life Plated with a galvanised finish, the clamp resists surface corrosion in standard workshop environments, extending service intervals and lowering replacement frequency. The metal handle increases wear resistance compared with plastic alternatives and ensures tactile stability when operating the lever. These material choices translate into long-term economy: less downtime for maintenance and fewer unexpected part failures. For tasks where a secure mechanical latch is key, the combination of finish and construction contributes directly to operational reliability. Suitable applications and straightforward selection This closure latch is suitable for general fixturing, assembly work and light clamping tasks on standard materials. The hardware’s clear numeric specifications make it simple to compare with other clamping elements when designing production tooling. The galvanised surface and metal handle make the component appropriate for workshop environments where occasional exposure and frequent handling occur. When selecting clamping elements, prioritise match between the required holding force and the stated 1200 N retention capability to ensure safe and effective fixation. Contact Metav Werkzeuge for a technical consultation or to request the detailed product sheet for the Kukamet toggle clamp 361; assistance is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 361-1 GTIN: 8682843521076 SKU: 361-1 ECLASS: 21041718 ETIM: EC011973 Facts Maximum pressing force: 1000 N Maximum holding force: 1200 N Thread length: 23 mm Weight: 0.055 kg Special features Material: galvanised Mounting: horizontal foot Handle: metal handle With hook: yes FAQ What is the main clamping force of this toggle clamp? The Kukamet Verschlussspanner 361 provides a maximum pressing force of 1000 N and a holding force of 1200 N, suitable for light industrial and workshop fixtures. Is the clamp suitable for outdoor or humid environments? The galvanised finish on the closure clamp increases corrosion resistance, making it appropriate for standard workshop conditions; extreme outdoor exposure may require additional protection. How is the unit mounted to a fixture? Mounting is via a horizontal foot plate designed for secure attachment to jigs and fixture plates; the horizontal-foot arrangement matches common mounting patterns. Does the clamp include an adjustable spindle? Yes, the clamp includes an adjustable threaded spindle with a thread length of 23 mm for fine positioning of the clamping point. Which materials is the clamp intended to hold? The clamp is intended for general fixturing and assembly tasks on common workshop materials; verify that the stated holding force meets the application’s requirements before selection. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp Horizontal Base Zinc-Plated, M6x40 Spindle, 1400N Hold Force - Kukamet
Reliable clamping for everyday production: galvanised construction combined with a maximum 1,200 N clamping force and 1,400 N holding force ensures secure fixation and repeatable results. Lightweight at 0.23 kg and fitted with a horizontal base for compact mounting, the unit supports efficient setup and handling. Order the vertical clamp directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Vertikalspanner 211 – Vertical clamp with galvanised finish and M6x40 spindle (Kukamet) The Vertikalspanner 211 is a compact vertical clamping device designed for shop fixtures and production jigs, offering a space-saving mounting option and clear mechanical data for reliable workholding in repetitive tasks. Galvanised steel construction Max clamping force 1,200 N Holding force 1,400 N Horizontal base mounting Secure fixation with measurable force and corrosion protection The 211 delivers a defined 1,200 N clamping force and a 1,400 N holding force, values that translate directly into repeatable part security on fixtures and jigs. The difference between clamping and holding force is reflected in the device’s mechanical design: the clamping (actuating) force determines how firmly a workpiece is engaged, while the holding force indicates resistance to displacement under load. The galvanised finish provides a practical degree of corrosion resistance for workshop environments, reducing the need for frequent surface maintenance and supporting long-term dimensional stability of the clamped assembly. The pressure spindle is specified as M6x40, a common thread size that simplifies integration with standard tooling and retainer plates. Fast, flexible mounting that reduces set-up times Fitted with a horizontal base, this vertical clamp is intended for low-profile installation where tabletop or fixture-plate mounting is required. The compact footprint and lightweight 0.23 kg construction make repositioning and fixture reconfiguration quicker and less demanding on assembly staff, which in turn shortens set-up cycles on small- to medium-batch production runs. Absence of an extended arm keeps the working area clear and reduces collision risk during automated or manual operations. For applications requiring straightforward mechanical clamping without additional kinematics, the clamping device offers a pragmatic balance of size, force and repeatability. Robust design for consistent production results Constructed from galvanised steel, the clamping unit prioritises durability and dependable surface protection in typical industrial settings. The mechanical simplicity—clear specification of clamping and holding forces, a standard pressure spindle and a horizontal foot—translates into predictable behaviour during repeated cycles, which benefits quality control and fixture standardisation. Where process stability and traceability are important, the measurable performance figures enable planning for fixture loads and support risk assessments. The compact form factor supports integration into bespoke jigs or modular clamping systems without extensive redesign. Choose Kukamet’s Vertikalspanner 211 for dependable, space-saving workholding — contact Metav Werkzeuge in Emmerich for ordering or tailored application advice. Technical data Article number: 211-2 Model: 211 GTIN: 8680731501131 Manufacturer: Kukamet Facts Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Pressure spindle: M6x40 Special features Material: galvanised Mounting: horizontal base Arm: not applicable Special feature: none FAQ What is the maximum clamping force of this vertical clamp? The maximum clamping force is 1,200 N as specified for the Vertikalspanner 211 from Kukamet. How is the clamping unit mounted to a fixture plate? Mounting is via the horizontal base; the design suits direct bolting to plates or modular fixture components. What thread is used for the pressure spindle? The pressure spindle is M6x40, a standard thread length and diameter for straightforward integration. Is the clamping device resistant to corrosion? Yes, the unit is galvanised, providing a protective coating suitable for general workshop conditions. What is the weight and how does that affect handling? The device weighs 0.23 kg, which facilitates easy repositioning and reduces the effort required during fixture setup. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp Stainless Steel Vertical Base, 1400N Holding Force - Kukamet
Take advantage of robust clamping performance combined with corrosion-resistant construction and compact installation for reliable fixture security. Benefit from a stainless steel build, 1,200 N clamping force and a vertical-foot mounting that keeps fixtures steady. Order directly via Metav Werkzeuge or consult the team for integration advice. Vertical clamp 212 – Kukamet vertical clamp, stainless steel, 1,200 N Vertical clamp 212 is a compact vertical clamping device designed for secure workholding in light to medium-duty assembly and workshop fixtures. Stainless steel for long service life Max clamping force 1,200 N Holding force up to 1,400 N Vertical-foot mounting, compact 0.23 kg Consistent, measurable clamping for reliable production The Vertical clamp 212 delivers a reproducible clamping action with a rated clamping force of 1,200 N and a holding force up to 1,400 N, providing measurable security for repeat operations. These force figures translate into stable fixtures during machining or assembly cycles, reducing rework and stoppages. The mechanism uses a threaded pressure spindle (M6x40) that permits fine adjustment of contact pressure; this feature allows integrators to set secure but non-damaging forces for delicate components. Specified values support planning for process forces and enable straightforward comparison with other workholding components. Space-saving mounting and quick integration into fixtures A vertical-foot mounting design simplifies attachment to plates and subplates and minimises the clamp’s footprint on the work surface. At 0.23 kg the unit is lightweight yet dimensionally stable, which aids in compact fixture layout and easier handling during assembly. The integrated M6x40 pressure spindle provides a standardised interface for contact and adjustment, enabling rapid adaptation to different workpiece heights without additional adapters. Where fixture density is a concern, the clamp’s compact profile helps maintain accessibility while keeping clamping elements out of the tool path. Durable materials and low-maintenance operation Constructed from stainless steel, the clamp resists corrosion and preserves surface finishes in workshop environments, reducing maintenance intervals and part replacement. The absence of special surface treatments or coatings simplifies cleaning and inspection routines, while the straightforward lever-type mechanism supports long service life under regular use. As part of Kukamet’s product range, this clamp is suitable for environments where hygiene or minimal contamination risk is desired, for example in light manufacturing and precision assembly lines. For secure, corrosion-resistant clamping with Kukamet precision, contact Metav Werkzeuge in Emmerich for ordering, technical advice or integration assistance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: S212-2 GTIN: 8680731509205 Model: 212 Manufacturer: Kukamet Facts Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Pressure spindle: M6x40 eClass: 21041717 ETIM: EC011973 Special features Material: Stainless steel Mounting: Vertical-foot Type: Lever clamp Special features: None FAQ What clamping and holding forces are specified for this clamp? The Vertical clamp 212 provides a clamping force of 1,200 N and a holding force up to 1,400 N, which makes the Kukamet S212-2 suitable for light to medium-duty fixture tasks. Is the clamp suitable for use in humid or corrosive workshop conditions? Yes, the clamp’s stainless steel construction gives the Vertical clamp 212 good resistance to corrosion, reducing maintenance and preserving function in demanding environments. How is the clamp mounted to a fixture plate? The device uses a vertical-foot mounting that allows the clamp to be secured upright to plates or subplates, enabling compact fixture designs and straightforward installation. What adjustment options are available for contact pressure? Adjustment is achieved via the M6x40 pressure spindle specified for the Vertical clamp 212, allowing precise setting of contact pressure to suit the workpiece. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp Three-Point With Massive Holding Arm And Safety Lock, Blackened - Kukamet
Robust, compact clamping for repeatable production: the Vertical toggle clamp 211 combines a 162 mm arm with a horizontal foot for stable bench mounting and a safety locking mechanism that secures workpieces under dynamic loads. With up to 1,400 N holding force and a 1,200 N clamping force, the device supports reliable cycle performance. Order the Vertical toggle clamp 211 directly via Metav Werkzeuge or consult the Metav team for technical advice. Vertical toggle clamp 211 – 162 mm arm, horizontal foot (Kukamet) The Vertical toggle clamp 211 is a compact vertical clamp designed for secure workholding in assembly, jigs and fixtures, and light production tasks. 162 mm robust holding arm Horizontal foot for bench mounting Safety locking for secure clamping Consistent clamping for assembly and fixtures The toggle clamp provides a consistent clamping action thanks to its lever geometry and safety locking. The defined mechanical travel and firm retention deliver a repeatable hold, which reduces rework and shortens setup times in repetitive assembly or small-series production. The 1,200 N clamping force converts to reliable contact pressure on the workpiece, while the 1,400 N holding force prevents unintended release during handling or vibration. This makes the clamp suitable where process reliability is essential rather than heavy machining. Space-saving construction with robust components A low-profile design combined with a 162 mm arm and a horizontal foot enables mounting on benches, fixture plates or jig bases with limited space. The body has a blackened finish, reducing glare and providing a corrosion-resistant surface in benign workshop environments. Weighing 0.235 kg, the unit adds minimal mass to moving assemblies and is easy to integrate into existing tooling. The presence of a massive holding arm improves leverage and increases long-term mechanical stability under frequent cycling. Safe, fast operation with minimal maintenance Operation is straightforward: the lever action permits rapid opening and closing, while the safety locking feature secures the clamp in its closed position to prevent accidental release. The simple mechanical construction minimises service needs; occasional inspection and light lubrication keep performance consistent. The clamp’s compact design supports ergonomic handling during fixture changes and helps maintain throughput in fast-paced production environments, offering a pragmatic balance between durability and usability. For a dependable, compact workholding solution, choose the Kukamet Vertical toggle clamp 211 and contact Metav Werkzeuge for expert advice and secure supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B211-2-D-L-C3 Manufacturer: Kukamet SKU: B211-2-D-L-C3 Facts Arm length: 162 mm Maximum clamping force: 1,200 N Maximum holding force: 1,400 N Weight: 0.235 kg eClass: 21041717 ETIM: EC011973 Special features Material / finish: blackened finish Mounting: horizontal foot Massive holding arm Safety locking mechanism Model designation: 211 Category: Spanner FAQ What clamping and holding forces does this clamp provide? The Vertical toggle clamp 211 offers a maximum clamping force of 1,200 N and a maximum holding force of 1,400 N, providing secure retention for assembly and fixturing tasks. How is the clamp mounted? Mounting is via a horizontal foot designed for bench or fixture plate installation; the horizontal-foot configuration suits compact setups and jig bases. What is the arm length and why does it matter? The arm length is 162 mm; this provides a balance between reach and leverage, enabling secure clamping without excessive protrusion from the fixture. What surface finish does the clamp have and how does this affect use? The unit has a blackened finish which reduces surface glare and offers basic corrosion resistance suitable for general workshop conditions. Is the clamp suitable for frequent production use? Yes. The 211 model’s robust arm, safety locking and mechanical design support repetitive cycle use in light to medium production environments; regular inspection and light maintenance keep it performing reliably. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With 108mm Arm, Massive Holding Arm & Safety Lock, Zinc-Plated - Kukamet
Take advantage of a galvanised construction and 1,200 N clamping force combined with a massive holding arm and safety lock for reliable fixture security in production and workshop environments; order the vertical clamp directly via Metav Werkzeuge or consult our technical team for application advice. 213 Vertical Clamp by Kukamet — galvanised, 1,200 N clamping force The 213 vertical clamp secures workpieces vertically with a robust holding arm and integrated safety lock, suited to jigs, fixtures and clamping stations in workshops and light production. Solid holding arm with safety lock Galvanised finish for corrosion resistance 108 mm reach with angled mounting foot 1,200 N clamping force, 1,400 N holding force Dependable clamping for daily workshop use The vertical clamp is designed to provide a clear benefit for routine fixture tasks: consistent clamping force and a secure locking mechanism reduce rework and minimise setup time. The galvanised surface gives added resistance against corrosion where humidity or coolant contact is likely, so the device maintains performance over time. With a compact reach of 108 mm from the mounting point, the unit integrates well into confined fixture layouts while the relatively low mass supports modular jigs without unnecessary additional weight. Built for repeatability and operator confidence A massive holding arm and a positive safety lock keep the workpiece engaged during machining or assembly, reducing the risk of movement under load. The specification shows a maximum clamping force of 1,200 N and a holding capability of 1,400 N, values that translate directly into handling small to medium components with predictable behaviour. The clamp’s angled mounting foot enables secure attachment to plates or tooling blocks, simplifying alignment and ensuring repeatable positioning across multiple stations. Practical installation and compatibility notes Installation is straightforward: the angled foot allows fixed attachment to horizontal or slightly inclined surfaces commonly used in production fixtures. The galvanised construction balances sturdiness with corrosion protection while keeping the unit lightweight for flexible use in mobile or small-bench setups. For integration into existing jigs, note the compact overall profile and the lightweight character, which helps maintain low inertia on moving assemblies; the device pairs well with standard fixture hardware and quick-change systems. For secure, repeatable clamping backed by Kukamet quality, contact Metav Werkzeuge to discuss suitability for specific fixtures or to request the SKU 213-2-D-L-C2 for procurement. Technical data Article number: 213-2-D-L-C2 GTIN: 8680731501919 Manufacturer: Kukamet Numbers / Core specifications Arm length: 108 mm Weight: 0.24 kg Maximum clamping force: 1,200 N Maximum holding force: 1,400 N eClass: 21041717 ETIM: EC011973 Designs / Special features Material: galvanised Mounting: angled mounting foot Special features: massive holding arm and safety lock Category: Spanner FAQ Which materials can be clamped with this device? The vertical clamp is suitable for a wide range of workshop materials; its galvanised construction and stated clamping/holding forces make the 213 appropriate for typical metal and mixed-material fixtures used in light production. How is the clamp mounted to a fixture plate? Mounting is via the angled mounting foot supplied with the unit; the foot is designed for secure bolting to horizontal or slightly inclined fixture plates in jigs and tooling assemblies. What do the clamping and holding force values indicate? The specified 1,200 N clamping force refers to the active force applied when the clamp is engaged; the 1,400 N holding force describes the static resistance to movement once the safety lock is engaged. Is the model suitable for repeated daily use in a production environment? Yes. The combination of a massive holding arm, safety lock and galvanised finish is intended to provide repeatable performance and corrosion protection suitable for routine production or workshop applications. Can the SKU be referenced for ordering or technical queries? For procurement or precise application checks, reference SKU 213-2-D-L-C2 when contacting Metav Werkzeuge or specifying the clamp in ordering documents. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With 158mm Arm, Massive Holding Arm And Safety Locking - Kukamet
Reliable vertical clamping with 1,200 N clamping force and a massive holding arm ensures secure fixtures and steady production. The compact angle-base mount and blackened finish combine durability with space-saving installation — order directly via Metav Werkzeuge or consult our specialists for precise application advice. Vertikalspanner 213 — Vertical toggle clamp, 1,200 N clamping force (Kukamet) The Vertikalspanner 213 is a vertical toggle clamp designed for secure workpiece retention in jigs, fixtures and assembly processes across workshops and light industrial lines Robust massiver Haltearm and safety lock 1,200 N clamping force with 1,400 N holding force Angle-base mounting for compact fixture integration Blackened finish for wear resistance and corrosion protection High-performance clamping for efficient production The clamp delivers a consistent 1,200 N clamping action and a measured 1,400 N retaining force, translating into reliable repeatability during batch work and assembly operations. The toggle mechanism converts short lever movement into strong clamping pressure, making setup faster and reducing cycle time — a clear benefit when throughput and stability matter. The massive holding arm gives a high moment resistance, which maintains alignment in fixtures and minimises rework. Space-saving mount that simplifies jig design With an angle-base mounting, the device integrates into tight fixture assemblies and on vertical or horizontal mounting plates without added bulk. The 158 mm arm reach is sufficient for common clamping depths while keeping the overall footprint small; at 0.24 kg the component adds negligible mass to portable fixtures. This compact architecture supports efficient workstation layouts and streamlines tool-change procedures without sacrificing holding power. Built for safety and long service life Safety is supported by a positive safety lock that secures the lever in the clamped position, preventing accidental release during handling. The blackened finish provides a protective layer against wear and light corrosion, extending service intervals and reducing lifecycle costs. For applications where consistent holding and operator safety are priorities, this clamp offers a durable combination of mechanical robustness and practical protection. Practical benefits for workshop and assembly use The clamp is especially suitable for fixtures in welding preparation, mechanical assembly and small-batch machining where a repeatable vertical hold is required. The simple lever action requires minimal training, while the robust construction supports long-term, low-maintenance operation. Clear numeric specifications help engineers verify integration: rated clamping and holding forces and a defined arm length facilitate fixture calculations and safety assessments. For tailored procurement or to discuss integration of this Kukamet clamp into specific jigs and fixtures, contact Metav Werkzeuge for technical guidance and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B213-2-D-L-C3 Manufacturer: Kukamet Clamping force (max): 1,200 N Holding force (max): 1,400 N Arm length: 158 mm Weight: 0.24 kg eClass: 21041717 ETIM: EC011973 Mounting type: Angle base Finish: Blackened Massive holding arm Safety lock Material appearance: Blackened/brüniert FAQ What clamping and holding forces does this clamp provide? The Vertikalspanner 213 provides a clamping force of 1,200 N and a holding force of 1,400 N, suitable for reliable fixture retention in light industrial applications. Can the clamp be mounted on vertical plates and compact fixtures? Yes, the angle-base mounting on the Vertikalspanner 213 allows compact integration on vertical and horizontal plates, aiding space-efficient jig design. Is the clamp suitable for repetitive production cycles? The Kukamet vertical toggle clamp B213-2-D-L-C3 is designed for repetitive use; its massive holding arm and safety lock support repeatability and operator safety in batch processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With Horizontal Base, Massive Holding Arm & Safety Lock, Zinc Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a galvanised finish, a 162 mm heavy-duty arm and a 1,400 N holding force to secure workpieces reliably; order the clamp direct via Metav Werkzeuge or consult Metav's specialists for specification support. Vertical clamp 211 — galvanised vertical clamp with safety lock (Kukamet) A Vertical clamp 211 engineered for secure vertical holding in jigs and fixtures, featuring a horizontal mounting foot, robust holding arm and integrated safety lock for repetitive production tasks Galvanised steel construction 162 mm heavy-duty arm 1,400 N maximum holding force Horizontal mounting foot, safety lock Consistent clamping for repetitive production The clamp delivers a clearly defined holding force of 1,400 N while the maximum pressing force is 1,200 N, providing predictable performance for series production and fixture work. These figures describe the static retention and the applied clamp pressure respectively; engineers can rely on the values when designing fixture loads or selecting complementary locating elements. The compact, repeatable action of the lever-style clamping mechanism reduces set-up time and supports consistent part quality across batches. Durability where workshop conditions matter Constructed from galvanised steel and fitted with a heavy-duty arm, the unit resists corrosion and mechanical wear typical in industrial environments. The massive arm and robust joints reduce flex under load, extending service intervals and lowering lifetime maintenance needs. Lightweight at just 0.235 kg, the clamp offers longevity without adding significant mass to assemblies, enabling durable performance in both production lines and mobile jig applications. Simple integration into fixtures and tooling The horizontal mounting foot provides a compact interface for direct attachment to plates and frames, simplifying integration into existing jigs. With an arm length of 162 mm, the geometry suits raised or recessed clamping points while keeping the actuation path accessible. The lever clamp design supports rapid manual operation and straightforward bench or fixture mounting; measured values support CAD integration and ensure correct spacing and bolt selection during installation. Enhanced safety and targeted applications Equipped with a safety lock, the clamp prevents unintended release under vibration or incidental contact, increasing process safety in repetitive handling operations. As a lever-type clamp, it is suitable for woodworking jigs, metalworking fixtures and general workshop applications where vertical holding and quick manual actuation are required. The combination of secure locking and defined force ratings makes it a pragmatic choice for assembly tasks where consistent clamping and operator safety are priorities. Choose the Kukamet vertical clamp 211 for robust, repeatable clamping and contact Metav Werkzeuge in Emmerich for supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 211-2-D-L-C3 GTIN: 8680731501193 SKU: 211-2-D-L-C3 Facts Arm length: 162 mm Maximum holding force: 1,400 N Maximum pressing force: 1,200 N Weight: 0.235 kg ECLASS: 21041717 ETIM: EC011973 Special features Material: Galvanised Mounting: Horizontal mounting foot Massive holding arm Safety lock Clamping type: lever clamp Brand: Kukamet FAQ What load capacity does the clamp provide? The Vertical clamp 211 offers a maximum holding force of 1,400 N and a pressing force of 1,200 N, values suitable for many fixture and assembly tasks. Which materials is the clamp suitable for? The galvanised construction and lever clamping make the clamp suitable for general workshop applications including metal and wood fixtures; selection should be based on specific fixture geometry and applied loads. How is the clamp mounted? The unit mounts via a horizontal mounting foot designed for direct attachment to plates or frames; arm geometry of 162 mm assists in aligning clamping action with component geometry. Does the clamp include a locking mechanism? Yes, the clamp features an integrated safety lock to prevent unintended release under vibration or incidental contact. Is the clamp lightweight enough for mobile jig use? At 0.235 kg the clamp is compact and light, enabling use in mobile or modular jig systems without significantly increasing assembly mass. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With Safety Lock, Angle Base, Zinc-Plated - Kukamet
Take advantage of the combination of compact design, robust holding power and an integrated safety lock for reliable fixture work; order the clamp directly via Metav Werkzeuge or request technical advice from our consultants. Vertikalspanner 213 – Vertical clamp with safety lock and angled base (Kukamet) The Vertikalspanner 213 is a vertical clamping device for general workshop and light industrial fixturing, designed to secure workpieces where rapid, repeatable clamping and a secure locked position are required. Zinc-plated corrosion protection 1,200 N maximum clamping force 1,400 N holding force Safety lock for secure clamping Consistent clamping performance for precise setups The vertical clamp delivers a defined 1,200 N clamping force with a 1,400 N holding force, providing measurable retention for routine fixture work. These figures indicate the device’s capacity to press and hold components during machining or assembly; the clamping force relates to the pressure applied by the spindle, while the holding force denotes the secure retention once the lock engages. The compact, lightweight construction contributes to rapid fixture changes and reduces inertia on adjustable tooling plates, supporting efficient changeovers in small-batch production. Robust construction and mounting for workshop durability Finished with a zinc-plated coating, the unit resists corrosion and is suitable for workshop environments where humidity or coolant exposure is present. The clamp is supplied with an angled base (Winkelfuß) which permits flexible mounting orientations and straightforward integration into existing fixture plates. The M6×40 pressure spindle provides a standard threaded contact for direct application of force, and the integrated safety lock prevents accidental release under vibration or shock, reducing the risk of workpiece displacement during processing. Practical benefits for supply and maintenance planning Weighing just 0.265 kg, the clamp is easy to handle during jig assembly and replacement cycles, while its simple design minimises maintenance requirements. The device’s straightforward mechanism supports easy inspection and replacement of wear items if necessary, which helps maintain uptime. As part of a broader clamping strategy, this vertical clamp from Kukamet suits workshops and trade operations seeking reliable, repeatable fixturing without complex adjustment procedures. Secure reliable clamping with the Kukamet Vertikalspanner 213—contact Metav Werkzeuge for technical guidance or to arrange supply from our Emmerich hub Technical Data Article number: 213-2-L GTIN: 8680731501933 Brand: Kukamet Material: Zinc-plated Mounting: Angled base Pressure spindle: M6×40 Safety lock: Yes Facts Maximum clamping force: 1,200 N Maximum holding force: 1,400 N Weight: 0.265 kg eClass: 21041717 ETIM: EC011973 Special features Safety locking mechanism Angled-foot mounting Category: Spanner FAQ What clamping and holding forces does the Vertikalspanner 213 provide? The Vertikalspanner 213 delivers a maximum clamping force of 1,200 N and a holding force of 1,400 N, values that define its capability to press and securely retain workpieces during processing. Which mounting option is supplied with this clamp? The clamp is supplied with an angled base for flexible mounting on fixture plates and jigs, enabling varied orientation in assembly and machining setups. What is the pressure spindle specification on this vertical clamp? This vertical clamp features an M6×40 pressure spindle, a standard threaded contact for transmitting the clamping force to the workpiece. Is the clamp corrosion-resistant for workshop environments? The Vertikalspanner 213 has a zinc-plated finish that provides corrosion resistance suitable for typical workshop and light industrial conditions. Does the unit include a safety mechanism to prevent accidental release? Yes, the device incorporates a safety lock to secure the clamped position and reduce the risk of accidental release under vibration or impact. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With Safety Lock, Horizontal Foot Mount, Blackened Finish - Kukamet
Take advantage of the combination of compact design, robust safety locking and straightforward integration for reliable fixture clamping; order directly via Metav Werkzeuge or consult our specialists for application support. Vertikalspanner 211 — vertical clamp with horizontal foot and safety lock (Kukamet) Vertikalspanner 211 delivers secure vertical clamping for fixtures and jig assemblies, featuring a horizontal foot for plate mounting and an integrated safety lock for repeatable, safe operation. Integrated safety lock Horizontal foot mounting Max clamping force 1,400 N Compact weight 0.23 kg Consistent clamping performance that supports production flow The vertical clamp offers defined 1,200 N pressing force and a 1,400 N maximum holding capacity, values that translate into dependable workpiece restraint during machining and assembly cycles. The clamping spindle is specified as M6x40, which enables standardised fastening into fixture plates and adapters; this thread dimension also simplifies replacement or retrofit into existing setups. By specifying forces in newtons, engineers gain an objective basis for matching the clamp to expected process loads, reducing the risk of vibration-induced movement and rework. The result is a component that supports steady throughput and predictable results in repetitive production tasks. Low mass and robust finish for long service life A blackened (blued) finish provides corrosion resistance and reduces reflected glare at the workbench, while the unit’s 0.23 kg mass and compact footprint simplify handling and positioning in tight fixtures. The built-in safety lock prevents unintended release under vibration or incidental contact, contributing to operator safety and avoiding clamp-related downtime. These design choices lower maintenance needs and extend service intervals; where replacement is required, the small mass keeps logistics and handling straightforward, particularly for benchtop and light-duty fixture applications. Integration made simple for jigs and fixtures The clamp’s horizontal foot mounting orientation is optimised for plate-mounted jigs and multi-axis fixtures, allowing the clamp to be bolted flat and provide vertical restraint from above. The product’s compact design and standard spindle thread make it suitable for retrofitting into existing clamping arrays and for modular fixture construction. Identification for procurement and inventory is straightforward with SKU B211-2-L and GTIN available in the technical data; traceable components support quality assurance and spare-part management in production environments. Technical enquiries are supported by Metav’s product specialists for correct specification and integration guidance. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertikalspanner 211 into your fixtures; our specialists in Emmerich will assist with application details and ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: B211-2-L GTIN: 8680731507683 eClass: 21041717 ETIM: EC011973 Core specifications Max pressing force: 1,200 N Max holding force: 1,400 N Weight: 0.23 kg Spindle thread: M6x40 Features & materials Mounting: horizontal foot Safety lock present Finish: blackened (blued) Category: Clamps FAQ What maximum clamping and holding forces does the clamp provide? The Kukamet Vertikalspanner 211 specifies a pressing force of 1,200 N and a maximum holding force of 1,400 N, giving a clear load range for fixture planning. How is the clamp mounted to a jig or plate? Mounting is via a horizontal foot intended for bolting to fixture plates; the clamping spindle is M6x40 for standardised attachment. Does the clamp include a safety feature to prevent accidental release? Yes, the unit is fitted with an integrated safety lock to avoid unintended opening under vibration or impact. What finish and durability characteristics does the clamp have? The clamp is supplied with a blackened (blued) finish that improves corrosion resistance and reduces surface glare in workshop environments. Which SKU should be referenced when ordering spares or replacements? Use SKU B211-2-L for ordering and inventory to ensure the correct vertical clamp configuration is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamp With Safety Lock, Stainless Steel, M6x40 Spindle - Kukamet
The combination of stainless-steel construction, an integrated safety lock and a compact vertical mounting makes this clamp a reliable choice for production fixtures where secure, repeatable holding is essential. Order the clamp directly via Metav Werkzeuge or consult the technical team for specification support. Kukamet Vertical toggle clamp 212 – stainless-steel vertical clamp, 1,200 N clamping force The Vertical toggle clamp 212 is a compact vertical clamp designed for secure fixture holding in assembly and machining jigs, combining corrosion resistance with a user-friendly safety lock. Stainless-steel construction Integrated safety lock Up to 1,200 N clamping force Vertical-foot mounting Secure, measurable clamping for production use The clamp delivers a clearly defined clamping action with a nominal clamping force of 1,200 N and a maximum holding force of 1,400 N, providing a measurable basis for fixture design and cycle planning. These figures allow engineers to calculate the required number and position of clamps for safe workholding, reducing the risk of part movement during machining. The safety lock prevents unintended release during handling or vibration, improving process reliability and worker safety while maintaining a short actuation travel typical for lever-style clamps. Compact footprint that integrates into tight jigs A vertical mounting foot and a lightweight build mean the device occupies minimal space on the fixture plate while contributing little mass to the assembly. With a unit weight of 0.23 kg, the clamp is suitable for portable fixtures and multi-station assemblies where low inertia is an advantage. The vertical-foot configuration enables straightforward integration into standard tooling plates and can be combined with locating pins and fasteners without complex rework, simplifying retrofits and new jig designs. Durable materials and straightforward operation for low upkeep Constructed from stainless steel, the clamp resists corrosion in workshop conditions and is suited to environments where longevity and low maintenance are priorities. The lever mechanism is designed for frequent operation and, together with the integrated lock, minimises accidental adjustments. As a lever-style clamp it offers tactile feedback and a clear open/locked state, which supports visual inspection routines and contributes to predictable cycle times in series production. Contact Metav Werkzeuge for advice on integrating Kukamet’s vertical toggle clamp 212 into existing fixtures or for order enquiries; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S212-2-L GTIN: 8680731509212 Manufacturer: Kukamet Material: Stainless steel SKU: S212-2-L Facts Clamping force (max): 1,200 N Holding force (max): 1,400 N Weight: 0.23 kg Spindle thread: M6 x 40 eClass: 21041717 ETIM: EC011973 Special features Vertical-foot mounting Integrated safety lock Lever-style clamp suitable for jigs and fixtures Corrosion-resistant stainless-steel design Compact design for tight assemblies FAQ What clamping and holding forces does the clamp provide? The Kukamet vertical toggle clamp 212 provides a clamping force of 1,200 N and a holding force of 1,400 N, figures that support reliable workholding in many assembly and machining tasks. Is the clamp suitable for use in humid or mildly corrosive workshop environments? Yes, the clamp’s stainless-steel construction improves corrosion resistance and is appropriate for workshops where moisture or light contaminants are present. How is the clamp mounted to a fixture plate? The device is designed for vertical-foot mounting and uses an M6 x 40 spindle thread for secure attachment to tooling plates or jig bases. Does the clamp include a safety mechanism to prevent accidental opening? An integrated safety lock is part of the clamp’s design, preventing unintended release during vibration or handling and supporting safer operation in production settings. Can the clamp be used in portable or lightweight fixtures? Yes, with a unit weight of 0.23 kg and a compact footprint, the clamp is suitable for portable fixtures and multi-station assemblies where low mass is beneficial. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200N Vertical Clamping Vice With 62mm Arm, Heavy Duty Hold Arm And Safety Lock - Kukamet
Benefit from dependable vertical clamping where compact dimensions, a 62 mm arm and a safety lock combine to secure workpieces reliably under production conditions; order through Metav Werkzeuge or consult our specialists for integration advice. 212 Vertical clamp by Kukamet — 62 mm arm, safety lock The 212 vertical clamp is a compact, vertically mounted clamping device designed to deliver secure holding in fixtures, jigs and small machines across workshop and light industrial environments. Massive holding arm with safety lock 62 mm arm for compact installation Up to 1,200 N clamping force Vertical-foot mounting for rigid fixing Secure clamping that keeps production running With a maximum clamping force of 1,200 N and a holding force of 1,400 N, this vertical clamping unit is engineered for repeatable restraint of components during machining and assembly. The robust clamping action reduces part movement and rework, supporting consistent cycle times and reliable quality control. The combination of measurable clamping values and a massive holding arm provides a tangible performance advantage when stability is critical in production sequences. Compact footprint for efficient fixture layouts A short 62 mm arm and a light overall mass (0.21 kg) allow integration into dense fixture arrangements without compromising rigidity. The vertical-foot mounting makes the clamp suitable for straightforward attachment to plates or bases where space is constrained, enabling more efficient use of fixture area and simpler toolpath planning. This compact design helps to reduce setup time and supports quicker changeovers between jobs. Built-in safety and durable finish for everyday use The integrated safety lock prevents unintended release under vibration or during handling, increasing operator safety and process reliability. The component’s black-oxide finish offers corrosion resistance and a professional appearance while standing up to workshop conditions. These design choices extend service life and reduce maintenance intervals, which in turn lowers total cost of ownership for routine production tooling. Practical compatibility and straightforward handling Designed as a lever-operated vertical clamp, the unit suits a wide range of workshop tasks where fast, repeatable clamping is required. The massive holding arm and safety locking mechanism facilitate secure operation during manual or semi-automated processes. Its modest mass and compact form factor simplify storage and handling, while the clear, quantified performance figures support straightforward specification in fixture design documents. For a robust vertical clamping solution from Kukamet, contact Metav Werkzeuge for availability and technical consultation — our team will advise on fitment and delivery from Emmerich. Technical Data SKU: B212-2-D-L-C1 Product: Vertical clamp 212 Brand: Kukamet ECLASS: 21041717 ETIM: EC011973 Core data Arm length: 62 mm Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.21 kg Special features Material finish: black-oxide Mounting: vertical foot Massive holding arm Safety locking mechanism Application: lever clamp FAQ What clamping and holding forces does this clamp provide? The Kukamet 212 vertical clamp delivers a maximum clamping force of 1,200 N and a holding force of 1,400 N, suitable for steady restraint of small to medium workpieces. Can the clamp be mounted on a fixture plate with limited space? Yes, the compact 62 mm arm and vertical-foot mounting make the clamp well suited to dense fixture layouts where space optimisation is required. Does the clamp include a mechanism to prevent accidental release? The unit features an integrated safety lock and a massive holding arm to reduce the risk of unintended opening under vibration. Is the finish suitable for workshop environments? The clamp is supplied with a black-oxide finish, providing basic corrosion resistance and a durable surface for regular workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120mm Horizontal Clamp With Angle Foot M5 x 30 Pressure 800N Holding 1100N - AMF
Achieve secure fixturing with the AMF Horizontal clamp No. 6833, Size 1 with angular foot: the combination of a 1,100 N holding force, 800 N clamping force and compact construction supports reliable, repeatable setups. Order the clamp directly via Metav Werkzeuge or consult the Metav specialists for tailored fixture advice. AMF Horizontal clamp No. 6833, Size 1 with angular foot — compact fixturing with high holding power The AMF Horizontal clamp No. 6833, Size 1 with angular foot is a compact clamping unit designed for jigs and fixtures where space is limited and dependable workpiece retention is required. Compact size 1 for tight fixtures Holding force 1,100 N for secure clamping Clamping force 800 N for stable operations Pressure screw M5 x 30 for fine adjustment Reliable clamping performance for repeatable setups The horizontal clamping unit delivers a measurable holding force of 1,100 N and a clamping force of 800 N, ensuring that workpieces remain immobile under machining or assembly loads. These figures translate into fewer rejects and less rework, as the fixture holds parts consistently during cycles. The compact Size 1 format minimises interference with tooling paths while maintaining the necessary retention force for small to medium components, which helps to reduce set-up time and increase throughput on production lines. Flexible mounting thanks to the angular foot An integrated angular foot provides versatile mounting options for the clamp, enabling attachment on vertical or horizontal surfaces without additional adapters. The long base dimension L1 120 mm and the clearances indicated by H, H1, H2 allow predictable positioning in complex jig constructions. This adaptability supports efficient machine bed use and allows fixtures to be designed with shorter tooling envelopes, improving accessibility and reducing collision risks during operation. Precise pressure control for delicate adjustments Fine-tuning of clamping pressure is achieved via the M5 x 30 pressure screw, which permits gradual increase of contact force without abrupt shocks to the workpiece. This adjustability is particularly beneficial for fixtures handling delicate or thin-walled components where excessive force would cause deformation. The screw-based adjustment simplifies repeatable setups and allows maintenance of consistent clamping conditions across production batches. Built for workshop and industrial fixturing needs The clamp suits a wide range of shop-floor applications, from small-batch jigs to serial production fixtures. Its combination of compact form and robust retention supports reliable process control and reduces operator intervention. The measured parameters and standardised attachment points make integration into existing fixtures straightforward, accelerating project deployment and contributing to predictable cycle times and improved overall equipment effectiveness. Secure machining setups with AMF's compact horizontal clamp are available through Metav Werkzeuge — contact Metav Werkzeuge for availability and personalised fixture guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000604353NW Type: 6833 Product: Horizontal clamp Label: Waagrechtspanner Nr.6833 Gr.1 Winkelfuß AMF Brand: AMF Core figures Holding force max: 1,100 N Clamping force max: 800 N Pressure screw: M5 x 30 L1: 120 mm H: 57 mm H1: 68 mm H2: 49 mm A: 5 mm B: 32 mm C: 13.5 mm D: 5.2 mm E: 18.5 mm F: 4 mm I: 10 mm K: 8 mm M: 19 mm N: 31 mm P: 28 mm Angle a: 90° Special features With angular foot Size: 1 Pressure screw M5 x 30 Packaging unit: 1 FAQ What are the holding and clamping forces of this clamp? The AMF Horizontal clamp No. 6833 (SKU 4000604353NW) provides a holding force of 1,100 N and a clamping force of 800 N. How is the clamp mounted in a fixture? Mounting is via the angular foot, allowing attachment to vertical or horizontal surfaces; the base length L1 120 mm and standardised dimensions simplify positioning. Is the clamping pressure adjustable? Yes, clamping pressure is adjusted using the M5 x 30 pressure screw for fine, controlled changes in contact force. For which applications is this clamp best suited? The clamp is suitable for jigs and fixtures in workshop and industrial settings, especially where compact retention with reliable holding is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Horizontal Clamp With Horizontal Base, 800 N Clamping Force, 1 Pc - AMF
Take advantage of a compact, robust clamping solution that combines a Size 1 footprint with a low-profile horizontal foot and a reliable clamping force of 800 N, delivering secure holding of up to 1,100 N for fixture and jig applications. Order the AMF horizontal clamp directly via Metav Werkzeuge or consult our specialists for application guidance. AMF Horizontal Clamp No. 6830 (Size 1) with Horizontal Foot — 800 N clamping force The AMF Horizontal Clamp No. 6830 (Size 1) is a compact horizontal clamping device designed for fixture and jig work where a low-profile horizontal foot is required, providing dependable clamping and repeatable positioning in constrained spaces Compact size 1 for space-saving fixtures Horizontal foot for low-profile mounting Max clamping force 800 N, holding 1,100 N Includes M5 x 30 pressure screw Precise, space-saving clamping for jigs and fixtures The horizontal clamp offers a compact Size 1 construction that suits tight fixture configurations while keeping machining envelopes clear. Its low-profile horizontal foot reduces interference with adjacent components and allows mounting where vertical clearance is limited. The combination of compact dimensions and lateral mounting makes the unit ideal for repetitive production setups, assembly jigs and manual fixture stations where consistent lateral clamping is required. The incorporated M5 x 30 pressure screw permits secure adjustment and fine setting of the contact point, supporting reliable part location without additional adapter elements. Reliable holding and repeatable forces for process security Engineered for industrial use, the clamp provides a clamping force of up to 800 N and a holding force of 1,100 N, ensuring firm part retention during machining or assembly steps. The device’s adjustable elements — shown in the dimensional data — allow an adaptable clamping range for varying stock thicknesses, delivering reproducible pressure across cycles. For production planners and quality engineers, this means fewer rejects from part movement and more predictable process capability. The mechanism is straightforward to integrate into existing fixtures, translating force specifications into verifiable holding behaviour on the shop floor. Practical dimensions and adjustable range for flexible use Key dimensions and adjustment windows are provided to aid fixture design and NC programming. The item includes an adjustable clamping range (C: 13–14.5 mm) and stroke/height parameters that facilitate quick integration into bespoke workholding. These measurable values support precise CAD layout and help determine clearance envelopes. Where system robustness and repeatability are priorities, the unit’s physical parameters allow engineers to calculate leverage, contact pressure and potential interference, reducing trial-and-error during fixture assembly. For assured fixture performance and integration support, order the AMF Horizontal Clamp No. 6830 via Metav Werkzeuge — for technical advice and availability contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 4000833507NW Manufacturer: AMF Type: 6830 Product type: Horizontal clamp with horizontal foot Packaging unit: 1 Facts Max clamping force: 800 N Max holding force: 1,100 N A: 5 mm B: 42 mm C: 13–14.5 mm D: 5.2 mm E: 18.7 mm F: 8 mm H: 19 mm H1: 30 mm H2: 49 mm HW min.: −3 mm HW max.: 2.5 mm I: 10 mm K: 5.5 mm L1: 120 mm M: 18–21.5 mm N: 34 mm P: 34 mm Special features With horizontal foot Pressure screw M5 x 30 Size 1 Adjustable clamping range (C) Low-profile mounting for constrained spaces FAQ What clamping and holding forces does the clamp provide? The AMF Horizontal Clamp No. 6830 delivers a clamping force up to 800 N and a holding force up to 1,100 N, suitable for many light- to medium-duty fixture applications. Is the clamping range adjustable to accommodate different workpiece thicknesses? Yes, the clamp features an adjustable clamping range (C: 13–14.5 mm) and other dimensional allowances that enable adaptation to varying material thicknesses. Can the unit be mounted on horizontal surfaces with limited vertical clearance? The low-profile horizontal foot and compact Size 1 design permit mounting where vertical clearance is restricted, making the device suitable for confined fixture arrangements. Does the clamp include an adjustment screw and what is its specification? The assembly includes a pressure screw specified as M5 x 30 for contact-point adjustment and secure part seating within the fixture. Is the product identified by a specific SKU for ordering and traceability? Yes, the clamp is listed under SKU 4000833507NW for ordering and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Machine Table Clamp 200mm Clamping Height, 22x10.5mm Rail Section - BESSEY
Take advantage of secure, high clamping height together with a compact rail profile for reliable machine-table operations; benefit from robust design and straightforward installation — order directly via Metav Werkzeuge or consult our specialists for specification matching. BESSEY machine table clamp – 200 mm clamping height, 120 mm reach A BESSEY machine table clamp engineered for firm, repeatable workpiece clamping on machine tables, offering a 200 mm clamping height and a 120 mm projection for flexible setup. 200 mm clamping height for large setups 120 mm reach for versatile positioning 22 x 10.5 mm rail cross-section for compact fit Designed for machine-table clamping applications Firm, repeatable clamping that speeds production The clamping solution provides a consistent clamping height of 200 mm, ensuring repeatable setups that reduce adjustment time between operations. The elevated jaw position simplifies handling of taller workpieces and minimises rework caused by inaccurate fixture heights. Built as a precision machine table clamp, the device translates setup consistency into measurable time savings on the production floor while supporting process stability. Flexible positioning with compact rail integration With a 120 mm reach, the clamping arm delivers the projection needed for off-centre fixtures without imposing excessive space requirements. The 22 x 10.5 mm rail cross-section allows integration into narrow machine table slots and keeps the clamping footprint compact. This combination supports versatile fixturing strategies, enabling quick repositioning on the table and easier adaptation to diverse component geometries. Practical design for industrial workshop use The unit is conceived for straightforward installation and reliable everyday use in industrial contexts. The construction emphasises durability and repeatability, making it suitable for serial production and maintenance tasks alike. As a reputable brand component, the clamp contributes to a dependable fixturing setup that reduces process variability and supports a safer, more efficient workshop environment. Speak to Metav Werkzeuge for tailored advice on integrating the BESSEY clamping range into existing setups and request specific delivery options from Emmerich via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Item number: 4123740030NW Product type: Machine table clamp Brand: BESSEY Clamping height: 200 mm Reach/projection: 120 mm Rail cross-section: 22 x 10.5 mm Packaging unit: 1 Facts Clamping height: 200 mm Reach: 120 mm Rail cross-section: 22 x 10.5 mm Packaging unit: 1 Special features Suitable for machine-table clamping Compact rail profile 22 x 10.5 mm Proven brand component for industrial use FAQ What is the maximum clamping height of this device? The clamp offers a maximum clamping height of 200 mm as specified for the BESSEY machine table clamp (SKU 4123740030NW). Can the clamp be used on narrow machine table slots? Yes, the 22 x 10.5 mm rail cross-section is designed for compact mounting and suits narrower table profiles. What does the 120 mm reach mean in practice? A 120 mm reach refers to the projection of the clamping arm, allowing positioning over off-centre or taller fixtures while keeping the clamp footprint small. Is this clamping solution suitable for serial production? The device is designed for repeatable setups and robust daily use, making it appropriate for serial operations where consistent clamping height and positioning are required. Which product type and brand is this item from? This is a machine table clamp from BESSEY, identified by SKU 4123740030NW, intended for secure table-mounted fixturing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120° 130mm Vertical Clamp With Massive Holding Arm, 2,000N Thrust 6,000N Hold - Kukamet
The combination of robust holding capacity, a massive holding arm and compact mounting makes this clamp a reliable choice for repeatable fixture work. Order the vertical clamp directly via Metav Werkzeuge or consult their advisers for dimensioning and integration support. 242 Vertical Clamp by Kukamet — massive holding arm, 2,000 N clamping force The 242 vertical clamp secures components vertically in jigs and fixtures for workshop and light industrial production, offering a compact footprint and high holding capacity. Massive holding arm for stable clamping Up to 6,000 N holding force Vertical foot mounting, 130 mm arm Secure clamping that reduces rework and cycle time The design delivers a clear performance advantage through its 2,000 N clamping force and a maximum 6,000 N holding force, providing predictable restraint for repetitive operations. High holding capacity minimises movement under machining or assembly loads, which reduces part rejects and rework. The force figures are suitable for medium-duty fixture work where consistent pressure and reliable retention are required; this allows process planners to design shorter cycle times without compromising safety or accuracy. Compact mounting for space-conscious fixtures With a 130 mm arm and a vertical foot mounting arrangement, the clamp integrates cleanly into tight jigs and confined tooling plates. The articulated geometry, giving a 120° angle, improves accessibility to the clamping lever and optimises tool clearance during loading and unloading. Such compactness supports denser fixture layouts and allows more parts per station, contributing to improved throughput in production lines and small-batch workshops. Durability designed for everyday workshop use The unit is finished with a blackened finish that offers basic corrosion resistance and a subdued appearance suited to a working environment. The solid holding arm construction and an overall mass that reflects sturdiness (approx. 2.222 kg) mean the clamp withstands frequent actuation with low maintenance requirements. A robust build reduces the need for early replacement and supports uninterrupted operation across multiple shifts. Practical applications and integration notes This vertical clamp is appropriate for fixtures used in assembly, light machining, welding jigs and inspection stations where vertical retention is needed. Its mounting style and arm length make it compatible with standard tooling plates and custom-made brackets. For specification checks, drawings or bespoke adaptions, Metav Werkzeuge provides technical advice and can assist with selection to match cycle load and fixture geometry — email info@metav-werkzeuge.com or call +49 2822 7131930 for clarifications. Choose Kukamet reliability: request the 242 vertical clamp via Metav Werkzeuge for durable, space-saving fixture solutions or contact their advisers for application-specific recommendations Technical data SKU: 242-6-D-C2 GTIN: 8682843520857 Weight: 2.222 kg Arm length: 130 mm Angle: 120° Clamping force (max): 2,000 N Holding force (max): 6,000 N Facts eClass: 21041717 ETIM: EC011973 Special features Vertical foot mounting Blackened finish Massive holding arm Category: Spanner Brand: Kukamet FAQ What is the maximum holding force of the clamp? The maximum holding force is 6,000 N for the 242 vertical clamp, providing strong retention for medium-duty fixturing tasks. Which mounting method is used for this clamp? The clamp uses a vertical foot mounting, suited to installation on tooling plates and custom brackets for upright clamping positions. What is the operational arm length and how does it affect installation? The arm length is 130 mm; this compact reach helps integrate the clamp into tight fixtures while maintaining good lever access. Is the finish suitable for workshop environments? The blackened finish on the 242 offers basic corrosion resistance and a robust appearance appropriate for typical workshop conditions. Can the clamp be used for welding jigs and assembly fixtures? Yes, the clamp is designed for applications such as assembly, welding jigs and inspection fixtures where reliable vertical clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° 1500 N Vertical Clamp, 5000 N Holding Force, Blackened - Kukamet
Benefit from a compact vertical toggle clamp that combines a 5,000 N holding force, a 1,500 N clamping force and a space‑saving vertical‑foot mounting for reliable fixturing. Order the clamp directly via Metav Werkzeuge or speak to our consultants for specification advice. Vertical toggle clamp 242 — Kukamet vertical clamp with 5,000 N holding force Vertical toggle clamp 242 is a robust vertical clamping solution for jigs and fixtures, designed for secure workholding with a vertical‑foot mounting and blackened finish. 5,000 N holding force 1,500 N clamping force Vertical-foot mounting Black oxide finish Secure clamping that keeps production moving The vertical toggle clamp delivers a consistent holding force of up to 5,000 N and a maximum clamping force of 1,500 N, making it suitable for demanding assembly and machining jigs. The mechanical locking action ensures repeatable positioning and reliable retention of workpieces under dynamic loads. For procurement and planning, the compact footprint and standard mounting pattern simplify integration into existing fixtures, reducing setup time and improving machine utilisation. Designed for quick installation and long service life The clamp’s vertical‑foot mounting allows installation on vertical surfaces or fixture plates without complex adaptors. With a total weight of 1.34 kg and a well‑balanced lever geometry, the unit is easy to fit and aligns with common tooling practices. The black oxide (blackened) finish provides corrosion resistance and a low‑glare surface, helping components stay free of marks while extending service intervals. These attributes together support efficient production cycles and lower lifecycle maintenance. Practical benefits for workshop and industrial use Built to industry standards (ECLASS and ETIM classification included), the device suits repeatable production tasks where secure clamping and minimal play are required. The 120° lever angle provides an effective travel-to-lock ratio, enabling high retention with moderate lever effort. Because the clamp is compact and mechanically straightforward, retrofitting into existing fixtures is feasible without major redesign — an advantage for maintenance teams and process engineers seeking short implementation times. Reliability backed by supply and expertise Sourcing through Metav adds an assurance of consistent quality and logistics: central stock in Emmerich and a broad industrial offering reduce the risk of delivery interruptions. Metav’s experience in precision tooling and a large product range support streamlined procurement and fewer suppliers to manage. For operations prioritising uptime and dependable tooling, the combination of a proven mechanical design and reliable supply chain contributes to measurable workflow stability. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertical Toggle Clamp 242 into production; call +49 2822 7131930 or email info@metav-werkzeuge.com for specification support and delivery from Emmerich Technical data SKU: 242-4 GTIN: 8680731504279 Manufacturer: Kukamet Facts Holding force: 5,000 N Clamping force (max): 1,500 N Weight: 1.34 kg Angle: 120° ECLASS: 21041717 ETIM: EC011973 Special features Vertical-foot mounting Finish: Blackened (black oxide) Material appearance: blackened Arm: Not applicable FAQ What maximum holding and clamping forces does the clamp offer? The Kukamet vertical toggle clamp 242 provides a holding force of up to 5,000 N and a maximum clamping force of 1,500 N, suitable for secure workholding in fixtures. Is the clamp suitable for vertical mounting in jigs and fixtures? Yes, the unit features a vertical‑foot mounting designed specifically for vertical attachment to fixture plates and jigs. What finish does the clamp have and how does it affect corrosion resistance? The clamp is supplied with a blackened (black oxide) finish that improves surface corrosion resistance and reduces the likelihood of marking on sensitive components. How heavy is the clamp and does that affect retrofit applications? At 1.34 kg, the clamp is compact and lightweight, allowing straightforward retrofitting into existing fixtures without significant structural changes. Which classifications and identifiers are provided for procurement systems? The product is listed with ECLASS 21041717 and ETIM EC011973 and carries SKU 242-4 and GTIN 8680731504279 for inventory and ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° 168mm Vertical Clamp With Counterforce 5kN, Massive Holding Arm, Blackened Finish - Kukamet
Robust workholding is achieved through the combination of a massive holding arm, 5,000 N maximum holding force and 1,500 N clamping capacity; order the unit via Metav Werkzeuge or request consultation from the technical team for application-specific advice. 241 vertical clamp – Kukamet heavy‑duty model with 168 mm arm and 5,000 N holding power The 241 vertical clamp is a heavy‑duty workholding device intended for secure clamping in machining and assembly fixtures, offering a compact design with a horizontal foot for versatile mounting. Massive 168 mm holding arm 5,000 N maximum holding force 1,500 N clamping capacity Horizontal foot for mounting Secure clamping that reduces rework and setup time The solid construction and defined force values translate into predictable performance on the shopfloor. The combination of a massive arm and clear force ratings means that components remain stable during machining operations, lowering the risk of vibration‑related errors and rework. The specified 5,000 N holding force secures workpieces against movement, while the 1,500 N clamping capacity defines the maximum applied clamping action; together these figures support faster cycle times and higher first‑pass rates. Technical terms: holding force denotes resistance to movement once the workpiece is seated, whereas clamping capacity is the active force applied by the clamping mechanism. Compact, adaptable mounting for diverse fixtures With its 168 mm arm and a horizontal foot mounting, this clamp integrates neatly into modular fixture plates and machine tables where vertical clamping is required. The 120° working angle provides a practical balance between access and force direction in confined setups. At 1.362 kg the unit is light enough for straightforward fixture integration yet solid in feel. The black blued finish offers basic corrosion protection and a low‑glare surface suitable for workshop environments, contributing to long service life and consistent alignment within fixtures. Built for durability with low maintenance demands Engineered for repetitive industrial use, the design emphasises robustness and straightforward upkeep. The massive arm and hardened contact areas withstand routine loading, while the finish slows surface wear in standard conditions. By using a durable clamping mechanism with defined force limits, the device supports predictable tool life and reduces unexpected downtime, delivering a cost‑effective workholding solution over time. For tailored advice on fixture integration or force application, Metav Werkzeuge can provide technical guidance and additional documentation. Contact Metav Werkzeuge for application support and to arrange supply of the Kukamet 241 vertical clamp with 5,000 N holding power directly from Emmerich. Technical data Article number: 241-4-D-C3 GTIN: 8682843520628 Manufacturer: Kukamet Facts Weight: 1.362 kg Arm length: 168 mm Max holding force: 5,000 N Max clamping force: 1,500 N Angle: 120° Special features Mounting: horizontal foot Finish: black blued Massive holding arm Category: Spanner FAQ What holding and clamping forces are specified for this clamp? The Kukamet 241 vertical clamp provides a maximum holding force of 5,000 N and a clamping capacity of 1,500 N (SKU 241-4-D-C3), giving clearly defined limits for fixture design. Is this clamp suitable for use on modular fixture plates and machine tables? Yes, the horizontal foot mounting and 168 mm arm make the clamp suitable for integration into modular fixtures and machine tables where vertical clamping is required. What protective finish does the unit have and how does it affect maintenance? The unit is supplied with a black blued finish that offers basic resistance to corrosion and reduces surface wear, supporting straightforward maintenance routines. What are the physical dimensions relevant for fixture planning? Key dimensions for planning are an arm length of 168 mm, a working angle of 120° and a unit weight of 1.362 kg, which aid in layout and load calculations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° 241 Vertical Clamp With Massive Holding Arm, 750 N Push Force, 2,500 N Hold Force, Black Brawn Finish - Kukamet
Take advantage of the combination of robust solid holding arm, 2,500 N holding force and a compact horizontal base for reliable fixture performance in production environments. Order the product directly via Metav Werkzeuge or consult our specialists for application advice. 241 Vertical Toggle Clamp by Kukamet – Horizontal base, 2,500 N holding force The 241 Vertical Toggle Clamp is a vertical-action toggle clamp designed for secure workpiece holding in jigs, fixtures and general workshop applications. Solid holding arm for increased durability 2,500 N maximum holding force Horizontal base for stable mounting Black blued finish resists corrosion Consistent, measurable clamping performance for repeatable results The vertical clamp delivers a clear technical benefit: a maximum holding force of 2,500 N combined with a clamping force of 750 N generates stable retention for repeatable operations. This ratio separates the retention capability from the actual clamping pressure, which is useful where a low contact pressure is required alongside high overall holding security. The engineering behind the toggle mechanism ensures quick actuation and a defined locked position, reducing cycle times and improving throughput in repetitive setups. Compact mounting and robust mechanical design for workshop integration Equipped with a horizontal base, this toggle clamp mounts close to the fixture plate and minimises footprint in confined assemblies. The 38.5 mm arm and solid holding arm construction provide mechanical stiffness that limits deflection under load, while the 120° operating angle allows for straightforward insertion and removal of the workpiece. At 0.29 kg, the unit is light enough for modular fixturing yet substantial where rigidity is required, enabling integration into manual and semi-automated systems. Long-term reliability through material choice and finish Finished in black blued steel, the clamp offers basic corrosion resistance suitable for workshop environments where oil and coolant contact can occur. The solid arm and toggle components are manufactured to withstand repetitive cycling, contributing to predictable service life and lower maintenance frequency. For production planners, these attributes translate into reduced downtime and dependable clamping behaviour across batches. Contact Metav Werkzeuge today to discuss how the Kukamet 241 vertical toggle clamp can increase fixture reliability in your processes, or request tailored advice from our specialists at Metav Werkzeuge. Technical data SKU: 241-2-D-C1 GTIN: 8682843520574 Model: 241 Manufacturer: Kukamet Facts Holding force: 2,500 N Clamping force: 750 N Arm dimension: 38.5 mm Operating angle: 120° Weight: 0.29 kg Special features Horizontal base mounting Solid holding arm Black blued finish Category: Clamps / Toggle clamps ECLASS: 21041717 ETIM: EC011973 FAQ What is the maximum holding force of this clamp? The Kukamet 241 vertical toggle clamp provides a maximum holding force of 2,500 N, suitable for secure retention in many fixture applications. Can this clamp be mounted on a fixture plate with standard fasteners? Yes, the horizontal base is designed for stable mounting to fixture plates and can be affixed using appropriate fasteners for the application. Is the material finish suitable for humid or oily workshop environments? The black blued finish offers basic corrosion resistance for workshop use; for harsher environments additional protection is recommended for the Kukamet 241. What are the key dimensional details to check when integrating the clamp? Important dimensions include the 38.5 mm arm and the 120° operating angle; these determine clearance and reach for the intended workpiece. Is the toggle action suitable for frequent manual operation? The vertical-action toggle mechanism is designed for quick manual actuation and consistent locked position, making it appropriate for repetitive manual fixturing tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° 2500N Hold Arm Vertical Clamp, 750N Thrust, Blackened Finish - Kukamet
Benefit from a compact clamping solution that combines a 2,500 N holding arm with a maximum clamping pressure of 750 N for secure, repeatable fixtures; the horizontal base keeps setups stable while the light construction simplifies integration. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application support. Kukamet Vertikalspanner 221 — vertical lever clamp with 2,500 N holding arm and horizontal base Kukamet Vertikalspanner 221 is a vertical lever clamp designed for secure workpiece retention in machining and assembly, featuring a horizontal mounting foot for stable fixture integration. 2,500 N holding arm for strong clamping Up to 750 N clamping pressure capacity Horizontal base for stable mounting Blackened finish for corrosion resistance Secure, repeatable clamping for precision workflows The vertical clamp delivers consistent retention through a reinforced holding arm rated at 2,500 N, paired with a maximum downward clamping pressure of 750 N. This separation between holding force and clamping pressure ensures that workpieces remain reliably located during machining cycles while the applied pressure controls the actual fixation. For fixtures where repeatability is critical, the lever mechanism offers fast actuation and clear mechanical feedback, reducing setup variability and speeding changeover. Space-saving mounting and low fixture load Fitted with a horizontal base, the clamp installs flush to tooling plates and fixture rails, enabling compact layouts and straightforward alignment. At 0.28 kg, the unit is lightweight, which lowers dynamic loads on moving subassemblies and simplifies manual handling during assembly or repositioning. The clamp’s geometry, including an angle of 120°, supports versatile orientations within jigs and reduces interference with neighbouring components, helping to maintain access for tools and measurement devices. Robust finish and workshop durability Finished in a blackened surface treatment, the clamp resists everyday workshop wear and offers improved protection against corrosion compared with untreated steel. The lever-style design, commonly described as a lever clamp, minimises moving-part complexity and is compatible with automated and manual operating environments. This makes the device suitable for medium-duty applications in production, assembly, or inspection where a reliable, low-maintenance retainer is required. Practical integration and supplier reliability The clamp’s compact dimensions and proven mechanical principle make it straightforward to implement in bespoke fixtures or off-the-shelf tooling systems. Supplied as a complete lever clamp module, it reduces engineering time for locating and retention tasks and supports efficient process design. Metav Werkzeuge provides product guidance from its Emmerich site and can advise on fixture layout or batch supply to ensure continuity of operation and predictable lead times. Contact Metav Werkzeuge for application guidance and supply from Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 221-2-C GTIN: 8682843520369 Model: 221 Manufacturer: Kukamet Facts Holding force: 2,500 N Maximum clamping pressure: 750 N Weight: 0.28 kg Angle: 120° ECLASS: 21041717 ETIM: EC011973 Special features Horizontal base (waagerechter Fuß) Holding arm with 2,500 N holding force Blackened finish (Schwarz brüniert) Lever clamp design (hebelspanner) FAQ What holding and clamping forces does the clamp provide? The Kukamet Vertikalspanner 221 (SKU 221-2-C) offers a holding arm rated at 2,500 N and a maximum clamping pressure of 750 N, allowing distinct control of retention and pressure. How is the clamp mounted to a fixture? Mounting is via the horizontal base, which permits flush installation on tooling plates and fixture rails for stable positioning and easy alignment. Is the finish suitable for workshop environments? Yes—the blackened finish provides enhanced resistance to corrosion and surface wear, making the clamp suitable for routine industrial use. Can the clamp be used in compact or mobile fixtures? With a weight of 0.28 kg and compact geometry, the unit is well suited to space-constrained fixtures and applications where low fixture mass is advantageous. What orientations are supported by the clamp geometry? The clamp’s 120° angle and lever configuration support versatile positioning within jigs and assemblies, reducing interference with adjacent tooling Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° 68mm Vertical Clamp With Massive Holding Arm, 5 000 N Clamp Force, 1.5 kN Press Force - Kukamet
Benefit from robust, compact workholding: a massive holding arm, precise 68 mm reach and up to 5,000 N holding force for stable, repeatable clamping — order the Vertical clamp 241 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Vertical clamp 241 — vertical clamp with massive holding arm and horizontal foot mounting A Kukamet Vertical clamp 241 designed for secure, consistent workholding in machine shops and assembly fixtures, offering a compact footprint and industrial-grade holding capacity. Massive holding arm for high rigidity Horizontal foot mounting for compact setup Up to 5,000 N holding force 68 mm arm reach for versatile positioning Proven stability for precision machining The Vertical clamp 241 delivers stable clamping through a massive holding arm and clearly specified load limits: 5,000 N holding force and 1,500 N clamping/pressure force. These values translate into reduced workpiece movement and fewer setup corrections, which supports higher repeatability in batch production. The robust build reduces vibration during cutting or finishing operations, improving surface quality and tool life. Technical terms such as holding force and clamping force are provided so planners can calculate fixture safety factors and ensure compatibility with existing jigs and presses. Quick integration and space-saving mounting Designed with a horizontal foot for straightforward attachment to plates or T-slot tables, this clamp minimises the requirement for additional brackets and keeps the work area compact. The 68 mm arm reach allows positioning across a range of component sizes while the modest mass of 1.186 kg keeps the fixture lightweight for retrofit tasks. Installation is therefore faster and simpler, which reduces machine downtime during setup changes and enables more efficient use of floor and table space in workshops and small production cells. Durable finish and reliable service life Finished in a blackened finish, the clamp is protected against corrosion and wear common in workshop environments. The lever-clamp design originates from traditional lever clamping concepts, updated here for higher industrial loads; the unit is robust enough for regular use in maintenance, toolroom and production contexts. The combination of material finish and solid construction supports long service intervals and predictable performance under repeated cycles, making the component a dependable choice when fixture reliability is essential. For detailed assembly notes and dimensional checks, the catalogue sheet is available with the product documentation. Contact Metav Werkzeuge to discuss fixture integration, confirm specifications or request a quotation for the Kukamet Vertical clamp 241 — local support from Emmerich ensures reliable supply and expert advice; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: 241-4-D-C1 GTIN: 8682843520604 Manufacturer: Kukamet Category: Spanner Core specifications Arm reach: 68 mm Holding force: 5,000 N Pressure force: 1,500 N Angle: 120° Weight: 1.186 kg eCl@ss: 21041717 ETIM: EC011973 Special features Massive holding arm Horizontal foot mounting Finish: blackened finish Design: vertical clamp Storytrigger: lever clamp Asset: catalogue PDF available FAQ What is the maximum holding force of the clamp? The Kukamet Vertical clamp 241 offers a maximum holding force of 5,000 N, specified for secure retention during machining and assembly operations. How is the clamp mounted to a fixture or table? Mounting is via a horizontal foot that allows direct attachment to plates or T-slot tables, providing a compact and rigid connection suitable for machine fixtures. What is the effective arm reach for positioning components? The arm reach is 68 mm, enabling versatile placement of the clamping point across a range of workpiece sizes and fixture layouts. What protective finish does the clamp have? The unit is supplied with a blackened finish, offering resistance to corrosion and wear typical in workshop environments. Which documents are available for technical planning? A catalogue PDF with dimensional and technical details is provided with the product; refer to the product documentation for precise integration measurements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° 750N Vertical Clamp With 2,500N Holding Arm, Blackened Finish - Kukamet
Take advantage of the combination of a 2,500 N holding arm, a horizontal base and a compact, lightweight design for reliable fixture clamping throughout repetitive production runs; order directly via Metav Werkzeuge or consult our specialists for specification matching. Kukamet 222 Vertical Clamp – 2,500 N holding arm, horizontal base The 222 Vertical Clamp is a compact vertical clamping unit for jigs and fixtures, designed to secure workpieces quickly with a high holding force and a stable horizontal mounting arrangement. Strong 2,500 N holding arm Horizontal base for stable mounting Compact, lightweight design at 0.28 kg Consistent force for repetitive fixturing The clamping unit delivers a 2,500 N holding force combined with a 750 N pressing force, making it suitable for repetitive fixturing tasks where consistent clamp performance reduces setup time and rejects. By converting mechanical leverage into a predictable clamping result, the device supports steady cycle times and lowers the likelihood of part movement during machining or inspection. The robust lever action and clear mechanical ratios mean the fixturing process is efficient and measurable. Secure mounting that saves fixture space Equipped with a horizontal base, the clamp mounts flat to tooling plates or subplates and requires minimal footprint on the fixture. The 120° lever angle provides ergonomic actuation without encroaching on adjacent components, while the compact form and 0.28 kg mass ease integration into dense tooling layouts. These attributes help to maintain clear access for toolpaths and probing, while enabling flexible placement across a wide range of jigs and assembly fixtures. Workshop-ready finish and low-maintenance operation Built with a blackened, burnished finish, the clamp offers a subdued surface that resists obvious wear and blends into industrial surroundings. The mechanical design focuses on durability and straightforward upkeep, ensuring the unit performs reliably over long production runs with minimal intervention. The combination of a hardened holding arm and precision pivoting points supports long-term repeatability and stable performance in everyday workshop environments. For stable, compact workholding choose the Kukamet 222 and contact Metav Werkzeuge for order placement and technical guidance. Technical data SKU: 222-2-C GTIN: 8682843520468 eClass: 21041717 ETIM: EC011973 Facts Weight: 0.28 kg Max holding force: 2,500 N Max pressing force: 750 N Lever angle: 120° Special features Type: Vertical clamp (Vertikalspanner) Mounting: horizontal base Material/finish: blackened, burnished finish Holding arm with 2,500 N holding force FAQ What holding capacity does the clamp provide? The Kukamet 222 vertical clamp offers a maximum holding capacity of 2,500 N, with a separate maximum pressing force of 750 N for secure single-action clamping. How is the clamp mounted to a fixture? Mounting is performed on a horizontal base; the compact footprint lends itself to direct attachment on tooling plates and subplates in jigs and fixtures. Is the clamp suitable for tight fixture layouts? Yes, the compact mass of 0.28 kg and the 120° lever angle allow placement in dense fixturing arrangements while maintaining ergonomic operation and minimal intrusion. What surface protection does the clamp have? The unit features a blackened, burnished finish that provides a durable surface treatment suited to workshop use and reduces the visibility of routine wear. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° 88.5mm Vertical Clamp With Massive Holding Arm, 2,500N Holding Force - Kukamet
Take advantage of a compact, robust clamping solution that combines a solid holding arm, a vertical-foot mount and reliable force ratings for uninterrupted fixture operation; order directly via Metav Werkzeuge or consult the sales team for application advice. 242 Vertical Toggle Clamp – vertical foot mounting, solid holding arm by Kukamet The 242 is a vertical toggle clamp designed for secure workpiece fixation in jigs and fixtures where a compact footprint and strong holding capacity are required Solid holding arm, heavy-duty construction Vertical foot mount for compact installation 750 N clamping force, 2,500 N holding force Blackened finish for corrosion resistance Secure fixation that reduces rework and cycle time The 242 vertical toggle clamp delivers dependable fixation through a clear distinction between clamping force and holding force: an operational clamping force of 750 N generates the required contact pressure during clamping while a holding force of 2,500 N resists breakout and vibration when the fixture is under load. This difference ensures stable positioning of components in milling, drilling or assembly operations and reduces the risk of part movement that leads to rework. The measured force values allow planners to select the clamp with predictable performance and to compare it against alternative devices during process design. Space-saving design and ergonomic handling for busy workstations Built with a vertical foot mount, the clamp is intended for installations where horizontal space is limited or where multiple clamps must be mounted close together. The 88.5 mm arm and a 120° swing provide a practical working range for common jigs, while a mass-optimised overall weight of 0.32 kg keeps the fixture light without sacrificing rigidity. The solid holding arm simplifies manual operation and gives a reassuring mechanical feel during engagement and release, speeding up cycle times in manual and semi-automated setups. Low-maintenance finish and robust construction for long service life Finished in a blackened finish for enhanced corrosion resistance, this clamp is suited to workshop environments where oil, coolant mist or regular handling occur. The robust construction minimises wear on pivot points and reduces maintenance interventions, contributing to higher uptime and predictable tool life. Where repeatability is important, the combination of durable materials and a simple lever mechanism yields consistent clamping behaviour over many cycles, supporting quality assurance efforts without complex adjustment procedures. Choose the Kukamet 242 for robust, space-saving clamping and contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 242-2-D-C2 GTIN: 8682843520765 Category: Spanner Core specifications Arm length: 88.5 mm Clamping force (max): 750 N Holding force (max): 2,500 N Angle: 120° Weight: 0.32 kg Materials & features Finish: blackened finish Mounting: vertical foot Solid holding arm Massive holding arm Lever-type toggle clamp Manufacturer: Kukamet FAQ What is the difference between the clamping force and the holding force? The 242 distinguishes clamping force (750 N), which is the active pressure applied during engagement, from holding force (2,500 N), which is the resistance to breakout once clamped; this ensures stable fixation under load. Can the clamp be mounted on a thin fixture plate? The vertical foot mount of the 242 is suitable for standard fixture plates; mounting requires secure fastening to provide full holding performance. Is the finish corrosion resistant for workshop use? The blackened finish on the 242 offers enhanced corrosion resistance, making the clamp appropriate for oily or humid shop environments. What are the typical applications for this clamp? This type of vertical toggle clamp is commonly used in milling, drilling, assembly jigs and welding fixtures where a compact clamp with strong holding capacity is required. Does the clamp require regular maintenance or lubrication? The 242 is designed for low maintenance; periodic inspection of pivot points and light lubrication will help maintain consistent performance over time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com