Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
120° Vertical Clamp 1.5 kN Clamp Force, Massive Holding Arm, Blackened Finish - Kukamet
Take advantage of the combination of high holding power, a solid 118 mm arm and a compact horizontal base for reliable fixture clamping; order directly via Metav Werkzeuge or request tailored application advice from our consultants. Vertical toggle clamp 241 by Kukamet — 5,000 N holding force, 118 mm arm The Vertical toggle clamp 241 is a heavy-duty vertical clamp designed for jigs, fixtures and production assemblies where stable holding and quick lever action are required 5,000 N maximum holding force 1,500 N clamping force 118 mm solid holding arm Horizontal base for stable mounting Secure clamping for demanding fixtures This vertical toggle clamp delivers a 5,000 N holding force combined with a 1,500 N clamping force, enabling secure retention of workpieces during machining and assembly. The distinction between holding and clamping force is important: clamping force is the active pressure applied by the mechanism, while holding force indicates the load that the clamp can safely resist when locked. These figures make the clamp suitable for repetitive production tasks where consistent part position is critical, reducing rework and downtime through reliable retention. Built for endurance and straightforward installation The clamp features a solid 118 mm arm and robust construction with a blackened finish that resists wear in workshop environments. The horizontal base simplifies mounting on fixture plates and frames, allowing direct attachment to flat surfaces for a compact footprint. At approximately 1.266 kg, the unit provides a stable feel without adding excessive mass to tooling stations. The lever geometry with a 120° travel ensures quick engagement and positive lock action, improving cycle times in assembly or welding fixtures. Designed to streamline production workflows Engineered as a practical solution for clamping technology, this clamp supports quick part changeover and reproducible clamping positions. The massive holding arm gives a rigid support point that minimises offset or twist under load, which is especially useful in repetitive operations and automated jigs. Clear numerical specifications help planners and engineers select appropriate mounting arrangements and verify compatibility with existing fixture designs. Where a compact, durable clamp is required, this model balances performance and installation simplicity without unnecessary complexity Contact Metav Werkzeuge for a configuration check and delivery options for the Kukamet vertical toggle clamp 241 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 241-4-D-C2 GTIN: 8682843520611 Manufacturer: Kukamet Facts Holding force: 5,000 N Clamping force (max): 1,500 N Arm length: 118 mm Angle: 120° Weight: 1.266 kg Special features Solid holding arm Horizontal base for stable mounting Blackened finish Compact lever toggle design FAQ What loads can the clamp safely resist? The Kukamet vertical toggle clamp 241 is specified with a holding force of 5,000 N and a clamping force of 1,500 N, values intended for assessing suitability in fixtures and jigs. How is the clamp mounted in a fixture? Mounting is via the horizontal base; the design allows direct attachment to flat plates or frames for compact and stable installation. What is the effective reach of the holding arm? The solid arm provides an effective length of 118 mm, giving a good reach for a range of typical workpiece sizes while maintaining rigidity. Is the surface treated for workshop use? The clamp has a blackened finish that improves surface durability and resists routine workshop wear, supporting long service life in production environments. Which industries benefit most from this clamp? The toggle clamp 241 is well suited to manufacturing, assembly and welding fixtures where consistent, repeatable retention and fast cycle times are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 1.5 kN Thrust, 5 kN Hold, Blackened Finish - Kukamet
Take advantage of a compact, lever-operated solution that combines 5,000 N holding force with a 1,500 N clamping capacity and straightforward horizontal-base mounting for reliable fixturing. Order the Kukamet clamp directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Vertical clamp 241 — Kukamet vertical clamp with 5,000 N holding force and horizontal base The Vertical clamp 241 is a compact, lever-operated vertical clamping solution designed for jigs and fixtures where reliable holding and space-saving installation are essential. 5,000 N holding force 1,500 N clamping force Horizontal base mounting Compact weight 1.34 kg Consistent, measurable clamping power for stable setups The lever-style mechanism delivers clearly defined forces: 5,000 N of holding capability for secure fixture retention and up to 1,500 N of clamping pressure for active workholding. The specified 120° operating angle provides a reliable mechanical advantage and straightforward open/close movement, reducing ambiguity during setup. These quantifiable values help planners and workshop engineers calculate preload, machining forces and fixture safety with confidence, supporting predictable process outcomes and minimising rework. Minimal footprint and flexible mounting for busy benches With a horizontal base mounting arrangement and a 1.34 kg mass, this clamp occupies little space on a fixture plate while remaining robust in use. The compact dimensions simplify integration into existing jigs or bespoke tooling plates and allow multiple units to be installed close to the workpiece without interference. Reduced bulk supports denser fixturing layouts, making the component suitable for small-batch production and prototype runs where table space is at a premium. Practical finish and straightforward upkeep for daily use The component is supplied with a blackened finish that yields a uniform appearance and helps mask light wear from handling. The simple lever mechanism is designed for trouble-free operation and low-maintenance handling: routine inspection and a quick wipe are usually sufficient to keep performance consistent. The straightforward design reduces downtime associated with complex assembly and simplifies spare-part inventories, which benefits workshop managers seeking dependable, easy-to-manage clamping hardware. Prepared for workshop realities and fast integration Engineered as a lever clamp for general fixturing tasks, this product performs well in assembly, inspection and light machining contexts where repeatable clamping is required. Supplied via Metav Werkzeuge, the item benefits from a European quality filter and supply chain that supports reliable availability for trade and industry. The blended focus on measurable performance, small footprint and durable finish makes this vertical clamp a practical choice when consistent, repeatable workholding is needed. Contact Metav Werkzeuge for a tailored recommendation on the Kukamet vertical clamp 241 and ensure prompt, reliable supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 241-4 GTIN: 8680731504262 Model: 241 Facts Holding force: 5,000 N Clamping force (max): 1,500 N Weight: 1.34 kg Angle: 120° ECLASS: 21041717 ETIM: EC011973 Special features Mounting: Horizontal base Finish: Blackened Type: Lever-operated vertical clamp Category: Clamps Arm: Not applicable FAQ How much clamping and holding force does this clamp provide? The Kukamet vertical clamp 241 provides up to 1,500 N of clamping (closing) force and 5,000 N of static holding force for secure fixture retention. Can the clamp be mounted directly to a fixture plate? Yes. The clamp uses a horizontal base mounting arrangement suited to direct attachment on fixture plates and custom jigs. What finish does the clamp have and how should it be maintained? The unit is supplied with a blackened finish; routine visual checks and a light wipe with an appropriate cloth are normally sufficient to maintain appearance and function. Is this lever clamp suitable for high-density fixturing layouts? Its compact weight and horizontal base make the clamp suitable for tight layouts where several clamps must be placed in proximity without obstructing the workpiece. Does the clamp require special adjustments before first use? The lever mechanism is factory-set for typical use; final positioning and any minor adjustment are performed during fixture assembly to suit the specific clamping height and workpiece geometry. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 118mm Arm, Massive Hold Arm, 5 000N Holding Force, 1.5 kN Thrust - Kukamet
Take advantage of the 118 mm solid holding arm and the combination of 5,000 N holding force with 1,500 N clamping pressure to secure workpieces reliably in vertical fixtures; benefit from a compact, low-mass design that keeps handling and integration simple. Order directly via Metav Werkzeuge or ask our consultants for tailored advice. Kukamet 242 vertical clamp — solid holding arm, 5,000 N holding force The Kukamet 242 vertical clamp is a lever-style, vertically mounted clamping device designed for secure fixturing and repeatable workholding in jigs, small production runs and workshop fixtures. Solid 118 mm holding arm Vertical foot for secure mounting Holding force up to 5,000 N Blackened finish for durability Reliable clamping performance for continuous operation The 242 is engineered to deliver consistent, measurable clamping results: a maximum holding force of 5,000 N combined with a maximum clamping pressure of 1,500 N ensures parts remain fixed under machining and assembly loads. The lever mechanism converts operator input into high clamping force with minimal movement, reducing cycle time and operator fatigue. In practice, the clear distinction between holding force (resistance to pull-out) and clamping pressure (contact force applied to the workpiece) helps planners select the correct device for pressing, milling or inspection tasks without over‑engineering the fixture. Compact design that integrates easily into fixtures and jigs With a 118 mm solid arm and a total mass of 1.266 kg, the clamp offers a favourable stiffness-to-weight ratio that simplifies fixture design. The vertical foot mounting makes it straightforward to install on plates and modular tooling systems, while the solid holding arm minimises deflection under load. The blackened finish reduces surface corrosion and is suited to workshop environments where lubricants and coolant are present. These features together lower assembly time and make retrofitting into existing toolrooms practical and fast. Clear advantages for quality and process reliability Selecting a robust lever clamp like this model supports process stability and reduces rework: the fixed 120° clamping angle gives predictable component positioning, and the mechanical construction requires minimal maintenance compared with pneumatics or hydraulics. For users seeking a simple, long‑lasting mechanical solution, the vertical clamping device provides repeatability and tactile feedback that help maintain cycle quality. Technical planners will appreciate the concise specification set that enables rapid comparison and integration into fixture bills of materials. Contact Metav Werkzeuge for personalised technical guidance on the Kukamet 242 vertical clamp, request detailed drawings or a specification sheet, or discuss fixture integration with our specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 242-4-D-C2 GTIN: 8682843520802 Weight: 1.266 kg Arm length: 118 mm Angle: 120° Max holding force: 5,000 N Max clamping pressure: 1,500 N Finish: blackened Facts Holding force: 5,000 N Clamping pressure: 1,500 N Mass: 1.266 kg Arm: 118 mm Angle: 120° eClass: 21041717 ETIM: EC011973 Special features Solid holding arm Vertical foot mounting Blackened finish Lever-style operation Category: Clamping devices Manufacturer: Kukamet FAQ What maximum holding force does this clamp provide? The Kukamet 242 vertical clamp offers a maximum holding force of 5,000 N and a clamping pressure up to 1,500 N, suitable for a wide range of fixturing tasks. How is the clamp mounted in a fixture? Mounting is by a vertical foot, enabling secure attachment to fixture plates and modular tooling systems typical in jigs and small production lines. What is the working reach of the clamping arm? The clamp features a 118 mm solid holding arm, providing a stable lever length for effective part engagement and reduced deflection. What finish and durability can be expected from the device? The device is supplied with a blackened finish, improving corrosion resistance and suitability for workshop environments with coolant and lubricants. What identifiers help with procurement and documentation? Relevant identifiers: SKU 242-4-D-C2 and GTIN 8682843520802, which can be used for ordering and integration into parts lists. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 138.5mm Arm, Massive Hold Arm 750N Thrust 2,500N Holding Force, Blackened Finish - Kukamet
Take advantage of the combination of robust clamping capacity, compact mounting and a hardened blackened finish for reliable fixture stability in production environments; the design supports quick set-up and consistent repeatability. Order the clamp directly via Metav Werkzeuge or consult the Metav team for specification advice. 242 Vertical Clamp — massive holding arm, 2,500 N holding force A 242 Vertical Clamp engineered for secure vertical clamping in machining, assembly and fixture applications where rigid, repeatable holding is required Massive holding arm for high rigidity 2,500 N maximum holding force 750 N clamping pressure Vertical base with 120° swing angle Consistent fixture stability that reduces rework The robust design centres on a massive holding arm and a high-rated holding force to limit movement under load. With a rated 2,500 N holding capacity and a 750 N clamping pressure, the clamp delivers predictable resistance to part shift, reducing the need for corrective machining and rework. The compact construction, combined with a measured 138.5 mm arm, allows close placement to the workpiece while maintaining clearance on typical milling and drilling machines. This results in fewer interruptions during production and a measurable improvement in process reliability. Faster set-up and repeatable production cycles A vertical mounting arrangement with a 120° swing angle supports fast engagement and release of the clamping jaw, making changeovers more efficient. The clamp’s lever-clamp concept provides a clear mechanical advantage for secure closure with minimal applied force at the actuator, and the vertical base simplifies integration into existing fixture plates or modular tooling systems. The result is a clamping solution that supports higher throughput through quick, repeatable operations while preserving clamping integrity across batches. Durable finish and compact footprint for workshop environments Finished in a blackened surface treatment, the component resists corrosion and shows wear less visibly, extending time between maintenance intervals. At a mass of 0.354 kg and a compact arm length of 138.5 mm, the unit balances solidity with a small footprint, making it suitable for crowded fixture plates or jigs. The lever-style clamp offers reliable mechanics without complex adjustments, supporting maintenance teams with straightforward inspection and long service life in daily workshop use. Discuss specification and procurement with Metav Werkzeuge for reliable supply of the Kukamet 242 and tailored advice from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 242-2-D-C3 GTIN: 8682843520772 Manufacturer: Kukamet Category: Spanner (clamps) Material finish: blackened Core specifications Holding force: 2,500 N Clamping pressure: 750 N Arm length: 138.5 mm Weight: 0.354 kg Swing angle: 120° Features Vertical base mounting Massive holding arm Lever-clamp design Blackened finish eClass: 21041717 ETIM: EC011973 FAQ What materials is the clamp suitable for? The Kukamet 242 vertical clamp is a general-purpose fixture component; suitability depends on the workpiece and tooling setup rather than the clamp itself How is the clamp mounted? Mounting is via a vertical base; the design allows fixation to fixture plates or jigs in a vertical orientation What is the maximum holding capacity? Rated holding capacity is 2,500 N as specified for the 242 vertical clamp (SKU 242-2-D-C3) What maintenance does the clamp require? Periodic inspection of the lever mechanism and the blackened surface for damage is recommended; lubrication of pivot points as per workshop practice extends service life Is the clamp suitable for repeatable production cycles? Yes — the 120° swing and lever actuation provide quick, repeatable engagement suitable for batch production Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 1500 N Thrust, Massive 168mm Arm, 5000 N Holding Force - Kukamet
Take advantage of the solid holding arm, the compact 168 mm reach and the combination of high clamping and holding forces for reliable fixture work; order the vertical clamp directly via Metav Werkzeuge or consult the technical team for application advice. Kukamet Vertical clamp »242« — vertical clamping device with solid arm and vertical foot A robust vertical clamp designed for secure fixturing in metalworking and assembly applications, offering a solid holding arm and a vertical foot for fixed mounting. Solid holding arm for high rigidity Vertical foot mounting for secure installation Max clamping force 1,500 N Holding force up to 5,000 N Reliable rigidity for repetitive clamping tasks The Kukamet 242 vertical clamp delivers dependable rigidity through its solid holding arm, which is designed to resist bending under load and to maintain repeatable positioning. The robust construction is particularly suitable for fixtures where consistent clamping pressure is required across many cycles. The combination of a substantial arm and a blackened finish provides corrosion resistance while also reducing reflective surfaces in workshop environments. Thanks to a 168 mm arm, the device can reach common workpiece geometries without excessive overhang, reducing lever effects and improving component stability during machining or assembly processes. Secure mounting and measurable performance Built with a vertical foot, this clamping device is intended for secure bolted installation to fixture plates or machine beds, ensuring a fixed reference position that supports precision operations. Performance figures are clearly stated: a maximum clamping force of 1,500 N and a maximum holding force of 5,000 N, enabling selection based on required clamp load and safety margins. The clamp’s 120° actuation angle is optimised for compact installation while still providing a comfortable operating travel. These quantifiable values facilitate planning in jigs and fixtures and support process reliability in production environments. Practical benefits for workshop integration Durability and ease of integration are emphasised by the simple geometry and robust finish of the unit. The blackened finish helps to limit corrosion and wear in everyday workshop conditions, extending service life and reducing maintenance intervals. The clamp’s mass and kinematics are engineered to provide a predictable force profile, which simplifies risk assessments for clamping strategies. Where space is constrained, the vertical orientation reduces the device’s footprint while maintaining strong axial holding capacity, making it a practical choice for both single-station fixtures and production jigs. For tailored advice or to arrange supply of the Kukamet 242 vertical clamp, contact Metav Werkzeuge for expert guidance and ordering from Emmerich. Technical data Article number: 242-4-D-C3 GTIN: 8682843520819 Manufacturer: Kukamet Facts Arm length: 168 mm Max clamping force: 1,500 N Max holding force: 5,000 N Weight: 1.362 kg Angle: 120° Special features Solid holding arm Vertical foot mounting Blackened finish Massive holding arm FAQ What is the primary application for this vertical clamp? The vertical clamp is intended for fixture and jig applications in metalworking and assembly where a secure, vertical clamping action is required; the Kukamet 242 is suited to repetitive clamping tasks. How is the Kukamet 242 fastened to a fixture plate? The device is designed for bolted installation via its vertical foot, providing a fixed reference position for secure mounting to plates or machine beds. Which forces are relevant when selecting this clamp for a job? Consider both the maximum clamping force of 1,500 N and the holding force of up to 5,000 N when planning clamping strategies and safety margins for the workpiece. Does the finish offer corrosion protection? Yes, the blackened finish reduces surface corrosion and wear, improving longevity under typical workshop conditions. Is the arm length suitable for common fixture geometries? With a 168 mm arm length, the clamp reaches typical component geometries while limiting overhang and lever effects in many jig scenarios. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 180mm Arm Massive Hold, 2,000 N Thrust / 6,000 N Hold, Black Oxide - Kukamet
Robust clamping performance and a massive holding arm combine to reduce setup time and secure workpieces reliably. With a holding force of 6,000 N and a clamping force of 2,000 N, the device supports stable vertical workholding; order the unit directly via Metav Werkzeuge or consult the team for application advice. 241 Vertical Clamp by Kukamet — massive holding arm, 6,000 N holding force The 241 vertical clamp is a heavy-duty vertical clamping unit designed for fixtures and benches, featuring a horizontal foot for secure mounting and an extended arm for improved reach. Massive holding arm for enhanced stability Holding force 6,000 N for secure workholding Clamping force up to 2,000 N at 120° angle 180 mm arm length for extended reach Secure clamping for reliable production The vertical clamping solution offers a high holding force and a defined clamping force, delivering measurable benefits in repeatability and process security. The specified 6,000 N holding force prevents unintended movement during machining or assembly, while the 2,000 N clamping force provides the operative contact pressure required for many vertical workholding tasks. For production environments where consistent fixation shortens cycle time, this unit integrates into fixtures with minimal calibration effort. Built for durability and straightforward handling Constructed with a massive arm and a blackened surface finish, the unit is designed to withstand daily industrial use. The robust arm reduces deflection under load, which translates into sustained accuracy over time. The horizontal foot allows fixed mounting to plates or benches, enabling quick alignment and stable force transmission. The overall build supports frequent clamping cycles without complex maintenance, contributing to lower total operating effort for workshop teams. Adaptable mounting and practical reach An arm length of 180 mm and a working angle of 120° provide practical accessibility for a range of components and setups. The combination of the horizontal base and extended arm makes the clamp suitable for integration into jigs, modular fixtures and bespoke assemblies where vertical fixation is required. The blackened material finish offers corrosion resistance suitable for typical workshop atmospheres, while the unit’s compact mass keeps fixture weight manageable. Integration, workflow advantages and quality assurance As part of a clamping toolkit, the device improves handling efficiency and reduces rework by ensuring consistent part positioning. Measurable values like holding force and clamping force support engineering decisions when specifying fixture components. Sourcing the unit from an experienced distributor simplifies procurement and ensures that delivery aligns with production schedules, supporting uninterrupted workflows and long-term quality control. Choose the Kukamet 241 for robust vertical clamping and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: 241-6-D-C3 GTIN: 8682843520697 Manufacturer: Kukamet Mounting: horizontal foot Material finish: blackened Facts Holding force: 6,000 N Clamping force (max): 2,000 N Arm length: 180 mm Angle: 120° Weight: 2.376 kg Special features Massive holding arm Horizontal foot for stable mounting Designed for vertical workholding Blackened finish for corrosion resistance FAQ What is the primary holding capacity of this clamp? The clamp offers a holding force of 6,000 N; the 241 provides the secure fixation necessary for many vertical clamping applications. Which mounting method is required for installation? A horizontal foot is provided for bench or plate mounting, enabling stable attachment of the vertical clamping unit. What materials is the clamp suitable for handling in fixtures? The clamping unit is intended for general metalworking and fixture use; material suitability depends on the specific application and fixture design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 2,000 N Closing Force, 6,000 N Holding Force, Blackened - Kukamet
Take advantage of the combination of precise 2,000 N clamping performance, a compact horizontal base for stable mounting, and a corrosion-resistant black oxide finish for dependable shop-floor use; order or request advice via Metav Werkzeuge for a smooth integration into existing fixtures. 241 Vertical clamp — 2,000 N clamping force, horizontal base (Kukamet) The 241 vertical clamp is a lever-operated vertical clamping solution designed for jigs and fixtures in workshop and light industrial environments, combining strong clamping values with a compact mounting footprint. 2,000 N clamping force 6,000 N holding force Horizontal base for secure mounting Black oxide finish for corrosion resistance Consistent, measurable clamping performance for reliable production The clamp delivers a defined 2,000 N clamping force and a maximum 6,000 N holding capability, values that support repeatable fixation during machining, assembly and testing operations. The lever-actuated mechanism provides rapid engagement and disengagement, reducing cycle time on repetitive tasks. Specified forces make planning straightforward: the numbers allow engineers to calculate fixture safety margins and select compatible workholding elements with confidence. The unit’s 120° geometry provides clearance for tooling and easy access to the clamped workpiece. Durable surface and mounting that reduce downtime A black oxide (blackened) finish improves corrosion resistance and reduces visible wear without affecting dimensional accuracy. The clamp’s horizontal base is optimised for secure attachment to plates and subplates, permitting rigid assembly into custom fixtures. This surface treatment and mounting concept minimise maintenance interventions and extend service life under normal workshop conditions. Where ambient humidity or splash exposure is expected, the finish helps prevent early surface degradation and contributes to consistent clamping behaviour over time. Space-saving design that integrates into existing fixtures With a compact footprint and a mass of 2.34 kg, the clamp is suitable for integration into modular fixturing systems and smaller production cells where space and weight matter. The lever-operated concept enables fast manual operation without additional actuation equipment, making the unit appropriate for small-series production, assembly benches and inspection fixtures. The combination of a small mounting area and a robust mechanism supports ergonomic handling and straightforward retrofitting into established tooling arrangements. Practical advantages for workshop and service environments The clamp’s simple mechanical design reduces the number of wear-prone components and simplifies inspection routines. Because the fundamental principles are transparent—mechanical lever action, defined clamping and holding forces, and a stable base—maintenance procedures are limited to routine checks and lubrication where required. The specification-driven approach supports procurement decisions by emphasising verifiable data rather than vague claims, enabling faster approval in purchasing processes and clearer communication between production and toolmaking teams. Contact Metav Werkzeuge for specification matching and fast supply from Emmerich, or request further technical details to verify fitment for existing fixtures Technical Data SKU: 241-6 GTIN: 8680731504378 Brand: Kukamet eClass: 21041717 ETIM: EC011973 Key measurements Clamping force: 2,000 N Holding force: 6,000 N Weight: 2.34 kg Angle: 120° Special features Horizontal base mounting Lever-operated vertical clamp Black oxide (blackened) finish Compact design for jigs and fixtures FAQ What clamping and holding forces does this clamp provide? The 241 vertical clamp provides a clamping force of 2,000 N and a holding force of 6,000 N, offering defined values for secure fixation in machining and assembly tasks. How is the clamp mounted to a fixture or workbench? Mounting is via a horizontal base; the 241’s horizontal base allows stable attachment to plates, subplates and modular fixture systems. What surface treatment does the clamp have and why does it matter? The clamp features a black oxide (blackened) finish that enhances corrosion resistance and reduces surface glare, helping to maintain appearance and function in workshop environments. Is this clamp suitable for small-series production and manual assembly rigs? Yes; the compact form factor and lever operation make the 241 vertical clamp appropriate for small-series production, assembly benches and inspection fixtures where quick manual operation and limited footprint are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 2,000 N Thrust, 6,000 N Holding Force, Blackened - Kukamet
Robust vertical toggle clamp combining 2,000 N clamping force with a 6,000 N holding capacity, a blackened finish and a vertical base for compact mounting; order the 242 clamp from Metav Werkzeuge or consult the specialists for fitment and supply. Vertical clamp 242 — Vertical toggle clamp, 2,000 N clamping force (Kukamet) A Vertical clamp 242 for secure workholding in jigs and fixtures, engineered with a vertical base for upright mounting and consistent repeatability 2,000 N clamping force capacity 6,000 N holding force for secure fixation Vertical base for compact, upright mounting Blackened finish for corrosion resistance Reliable holding power for productive workflows The clamp delivers 2,000 N nominal clamping force with a rated 6,000 N holding capacity, enabling dependable fixation during machining and assembly cycles. High static holding capacity reduces the risk of workpiece movement under intermittent loads, which supports shorter cycle times and fewer reworks. By specifying the forces in Newtons, planners obtain a directly comparable performance figure for process validation; this clarity helps to match the clamp to the required clamping strategy and to downstream quality criteria. Space-saving mounting for compact fixtures and tooling Fitted with a vertical base that occupies minimal bench depth and allows upright installation, the clamp supports compact jig layouts where horizontal space is at a premium. The lever geometry with a 120° operating angle provides a clear locked position while keeping the actuator footprint small. With a mass of 2.34 kg, the unit balances solidity and ease of handling during fixture assembly, permitting straightforward integration into modular tooling plates without excessive counterweights or reinforcement. Durable finish designed for workshop environments The blackened finish offers an even surface treatment that improves resistance to routine shop-floor wear and reduces light reflection in assembly areas. The finish contributes to long-term visual stability and helps delay the onset of corrosion in typical industrial atmospheres. As a result, maintenance intervals are extended and the clamp retains functional appearance over repeated cycles, supporting predictable spare-part planning and lower life-cycle handling costs. Clear technical specification to speed purchasing and planning Key identifiers such as SKU 242-6 and GTIN 8680731508840 allow rapid ordering and unambiguous inventory management. The clamp’s compact design and specified forces simplify layout calculations for jig engineers and procurement alike: the distinction between clamping force (force applied by the actuator) and holding force (residual capacity to resist separation) is stated to aid selection and safety validation. With these objective data points, integration into production fixtures and quality documentation becomes more straightforward and verifiable. Contact Metav Werkzeuge today for an exact fit recommendation or to secure stock availability of the Kukamet 242 vertical toggle clamp from Emmerich Technical data SKU: 242-6 GTIN: 8680731508840 Manufacturer: Kukamet Facts Clamping force: 2,000 N Holding force: 6,000 N Weight: 2.34 kg Operating angle: 120° EClass: 21041717 ETIM: EC011973 Special features Vertical foot / vertical base mounting Blackened finish (schwarz brüniert) Category: Spanner Assets: product image and catalogue page available FAQ What are the nominal clamping and holding forces of the clamp? The Kukamet vertical clamp 242 specifies a clamping force of 2,000 N and a holding capacity of 6,000 N, values given for selection and safety verification. How is the clamp mounted in fixtures? Mounting is via a vertical base (vertical foot), enabling upright installation in compact jigs and fixture plates. Is the finish suitable for workshop environments? The clamp is supplied with a blackened finish, intended to improve surface durability and resist routine shop-floor wear. Which identifiers assist with ordering and stock checks? Use SKU 242-6 and GTIN 8680731508840 to ensure precise ordering and inventory control. What is the lever angle and why does it matter? The operating lever provides a 120° angle, giving a defined locked position and a compact actuator range for tight fixture layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 2,500 N Zinc-Plated Vertical Hold-Down Clamp - Kukamet
Take advantage of reliable 2,500 N clamping force and a compact, low-weight design to secure workpieces efficiently in jigs and assemblies; the horizontal foot allows stable mounting while the toggle action delivers repeatable pressure for production use. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 221 — Kukamet vertical toggle clamp with 2,500 N force and horizontal foot Vertical clamp 221 provides secure vertical clamping for assembly, welding and fixture applications where reliable, repeatable holding is required 2,500 N maximum clamping force Horizontal foot for stable mounting Compact design, low weight 0.24 kg Boosted throughput with dependable clamping performance The 2,500 N maximum clamping force of this toggle device ensures secure workpiece retention under repeated cycles, reducing stoppages and rework. The vertical toggle mechanism converts a short manual lever travel into a high holding force, which is especially useful for assembly and fixturing tasks where consistent pressure is essential. The robust action of the clamp offers measurable productivity advantages in serial operations while remaining straightforward to integrate into existing jigs. Easy integration and compact fixture design Weighing just 0.24 kg, the component is intentionally compact to keep fixture mass low and simplify handling during installation. The horizontal foot enables a stable, low-profile mounting on standard plates or rails and reduces the need for elaborate subframes. For engineers planning fixture layouts, this means less material, faster set-up and a smaller footprint on the assembly bench without sacrificing holding capability. Versatile toggle action and practical geometry The clamp provides a generous 120° opening angle, offering an extended range for part insertion and removal while maintaining firm clamping at the end of travel. The toggle action delivers a positive mechanical lock when closed, which prevents creep under vibration or thermal load. This makes the device appropriate for light-to-medium industrial applications where repeatable positioning and resistance to accidental release are priorities. For reliable toggle clamping with 2,500 N force, request Kukamet’s Vertical clamp 221 through Metav Werkzeuge — technical advice and ordering assistance are available from Metav Werkzeuge via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: 221-2 GTIN: 8682843520352 Manufacturer: Kukamet Core technical data Clamping force: 2,500 N Weight: 0.24 kg Opening angle: 120° Mounting: horizontal foot ECLASS: 21041717 ETIM: EC011973 Special features Toggle (lever) clamp action Compact, low-mass design No special additional features specified FAQ What is the maximum holding force of this clamp? The clamp delivers a maximum clamping force of 2,500 N, which provides secure retention for many assembly and fixture tasks when used as intended. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, allowing the clamp to be fixed to plates or fixture bases for stable installation in jigs and assemblies. Is the opening range suitable for larger parts? The device offers a 120° opening angle, giving an extended insertion range that supports workpieces with moderate height before clamping. How heavy is the clamp and what does that mean for fixture design? At 0.24 kg the clamp is lightweight, simplifying fixture balancing and reducing the need for heavy support structures while enabling swift manual handling during assembly. Can this clamp resist vibration and accidental release? Yes; the toggle mechanism provides a positive mechanical lock in the closed position, increasing resistance to vibration and accidental opening during operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 2000 N Thrust, Massive Holding Arm, 86mm Reach, Blackened Finish - Kukamet
Take advantage of the combination of a heavy-duty arm, high holding force and straightforward mounting for dependable clamping in repetitive production tasks; order directly via Metav Werkzeuge or consult our specialists for application support. 241 Vertical Clamp — Kukamet, heavy-duty arm, 6,000 N holding force The 241 Vertical Clamp is a vertical toggle clamp designed for secure workholding in jigs and fixtures where a durable, compact solution with a horizontal foot mount is required. Heavy-duty holding arm for stable clamping 6,000 N maximum holding force 2,000 N operating pressure rating Horizontal foot mounting, 120° opening angle Secure clamping performance that reduces rework The clamp delivers clearly defined clamping and actuation characteristics, combining a 6,000 N holding force with a 2,000 N actuation rating to secure components reliably under machining or assembly loads. This distinction between holding capacity and operating pressure means fixtures can be designed to resist displacement without overspecifying the actuator, improving cycle repeatability and minimising downtime. The result is a measurable improvement in process stability and fewer rejected parts from movement or vibration during critical operations. Robust design for daily workshop demands Constructed with a heavy-duty arm and a corrosion-resistant blackened finish, the unit resists wear from frequent operation while maintaining precise positioning. The arm reach of 86 mm and an opening angle of 120° permit a wide range of part geometries to be accommodated within compact fixture layouts. At a mass of 2.12 kg, the clamp balances solidity with ease of handling during assembly into tooling plates. This combination of durability and compactness supports long service life and predictable fixture behaviour in production environments. Easy integration into jigs and fixtures Fitted with a horizontal foot for mounting, the clamp is intended for straightforward installation on flat plates and adjustable fixtures; alignment is fast and repeatable. The lever-clamp design provides a positive mechanical lock when closed, ensuring parts remain fixed even when external forces act on the workpiece. Where repeatability and quick cycle times are required, this model offers a reliable mechanical solution that is compatible with common clamping layouts and can be incorporated into automated sequences or manual workstations without complex ancillary components. Contact Metav Werkzeuge for tailored mounting advice and reliable supply from Emmerich — speak to our specialists on +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 241-6-D-C1 GTIN: 8682843520680 Brand: Kukamet Designation: Vertical clamp 241 Material: Blackened finish Core technical data Max holding force: 6,000 N Max actuation force: 2,000 N Arm reach: 86 mm Opening angle: 120° Weight: 2.12 kg Special features Heavy-duty holding arm Horizontal foot mounting Lever clamp design Compact workshop clamp FAQ What is the difference between the holding force and the actuation force? The holding force is the maximum retention capacity under load, while the actuation force is the input force required to engage the clamp; the 241 Vertical Clamp is specified with a 6,000 N holding force and a 2,000 N actuation rating. Can the clamp be mounted to a flat tooling plate? Yes, the horizontal foot mounting is intended for direct attachment to flat plates and fixture bases, enabling secure and repeatable installation. Which applications suit this clamp best? The clamp is suitable for jigs and fixtures in machining, assembly and inspection tasks where a positive mechanical lock and compact footprint are needed; the lever design supports frequent operation. Is the finish suitable for demanding workshop environments? The blackened finish provides surface protection against wear and light corrosion, supporting extended service life under regular workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 225 Horizontal Foot 1.12kg 1500N/5000N Blackened - Kukamet
Take advantage of the combination of strong clamping performance and a compact, bench-mounted design for reliable fixture work; the robust blackened finish prolongs service life. Order the Kukamet 225 vertical lever clamp directly via Metav Werkzeuge or contact our consultants for technical advice. Kukamet 225 Vertical Lever Clamp — horizontal base, 1,500 N clamping force The 225 vertical lever clamp secures workpieces in fixtures and jigs for machining and assembly operations with repeatable performance and a compact footprint Holding force 5,000 N for secure retention Clamping force up to 1,500 N for strong grip Horizontal base for stable bench mounting Blackened finish for increased surface protection Dependable clamping power that supports efficient machining The clamp delivers defined clamping force and a higher holding force, enabling fixtures to withstand machining loads without slippage. Specified maximum values of 1,500 N (clamping) and 5,000 N (holding) provide a clear performance envelope, making it easier to design safe and reliable jigs. The distinction between clamping and holding is important: the clamping value describes the force applied by the lever to secure the workpiece, while the holding value indicates the static resistance the assembly can tolerate once closed. This separation helps planners select the correct device for cutting, drilling or assembly tasks. Compact mounting and a finish built for workshop use Engineered with a horizontal base for bench or fixture mounting, the unit integrates into tight layouts while maintaining stability. The blackened finish reduces visible wear and offers a basic level of surface protection against oxidation in everyday workshop environments. At approximately 1.12 kg, the component combines low mass with robust construction, simplifying handling during fixture assembly and replacement. Where space and repeatability matter, the compact footprint reduces the need for additional mounting hardware. Fast, repeatable operation to cut setup times Featuring a lever-style action, this vertical clamp enables quick engagement and disengagement with consistent clamping travel, improving throughput in batch production and manual assembly. The quick-action lever design supports short cycle times and reduces operator fatigue compared with screw-style devices, while consistent end positions ensure repeatability across multiple setups. For workshop managers seeking straightforward fixtures that reduce adjustment and inspection time, the lever mechanism is an effective choice. Contact Metav Werkzeuge today to discuss the Kukamet 225 vertical lever clamp for reliable fixture clamping and to arrange purchase or technical consultation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 225-4 GTIN: 8680731502619 ETIM: EC011973 eClass: 21041717 Facts Weight: 1.12 kg Max clamping force: 1,500 N Max holding force: 5,000 N Angle: 120° Special features Product type: vertical lever clamp Mounting: horizontal base Finish: blackened (blued) Manufacturer: Kukamet FAQ What maximum clamping and holding forces does the Kukamet 225 provide? The Kukamet 225 vertical lever clamp specifies a maximum clamping force of 1,500 N and a holding force of 5,000 N, allowing selection for applications with defined load requirements. Is the 225 suitable for bench or fixture mounting? Yes, the unit is supplied with a horizontal base designed for stable bench or fixture mounting in workshop and light industrial setups. How does the lever action benefit cycle times? The quick-action lever of this clamp reduces engagement time and supports repeatable end positions, which shortens setup and cycle times in repetitive assembly or machining processes. What surface protection does the clamp have? The clamp is finished in a blackened (blued) surface treatment that provides basic corrosion resistance and conceals wear from routine use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 38.5mm Arm, 750N Thrust 2,500N Holding, Blackened Finish, Massive Clamp Arm - Kukamet
Take advantage of a massive holding arm and a high holding force of 2,500 N for reliable clamping in confined assemblies; the compact, black-blued body and vertical-foot mounting make integration into fixtures straightforward. Order the Kukamet 242 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 242 Vertical Clamp — Massive arm, 2,500 N holding force The 242 is a vertical clamp engineered for secure vertical clamping in jigs, fixtures and assembly stations, featuring a robust arm and a compact footprint for tight workspaces Massive holding arm for robust clamping Up to 2,500 N holding force Vertical foot mounting for fixture integration Black-blued finish for corrosion resistance Secure retention with measurable performance The 242 delivers defined holding force and repeatable retention in production and workshop environments. With a declared holding force of 2,500 N and a maximum applied clamping force of 750 N, the device separates the concepts of retention and actuation: the applied clamp travel generates the pressing force, while the geometry and locking mechanism ensure sustained holding. This distinction matters when planning fixture loads and safety margins. The massive arm and a 120° working angle translate into a stable load path, reducing the risk of micro-movement during machining or assembly, which supports consistent quality and process reliability. Compact design that simplifies fixture layout Designed with a vertical foot for upright mounting, the clamp occupies minimal bench space while providing a solid anchorage point for plates or small assemblies. The 38.5 mm arm diameter contributes to torsional rigidity without adding unnecessary bulk; combined with a total mass of 0.29 kg, the unit is easy to position and replace in modular tooling setups. The black-blued finish provides basic corrosion protection and a professional appearance that integrates well into industrial environments. Where space is limited, the compact construction makes the device a practical choice for serial jigs and manual assembly stations. Operational benefits and application clarity For workshops seeking predictable clamping results, the 242 offers straightforward mechanics and low maintenance. The vertical mounting style is compatible with standard fixture plates and allows the clamp to be indexed into various holding positions due to its 120° working angle. Maintenance is limited to periodic inspection and lubrication of bearing surfaces, ensuring long service life with minimal downtime. The combination of a robust arm and clearly stated force ratings simplifies risk assessment and process documentation, supporting efficient production planning and auditability. Choose the Kukamet 242 vertical clamp for reliable, compact vertical clamping — contact Metav Werkzeuge for a tailored technical consultation or order support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 242-2-D-C1 GTIN: 8682843520758 Manufacturer: Kukamet Facts Arm diameter: 38.5 mm Weight: 0.29 kg Maximum holding force: 2,500 N Maximum clamping force: 750 N Working angle: 120° Special features Vertical foot mounting Material finish: black blued Massive holding arm Category: Spanner FAQ What holding and clamping forces are specified for this clamp? The Kukamet 242 specifies a maximum holding force of 2,500 N and a maximum applied clamping force of 750 N, enabling clear load planning for fixtures. How is the 242 mounted in a fixture? The device uses a vertical foot for upright mounting, allowing direct installation on plates and modular fixture systems. What is the arm size and how does it affect stiffness? The arm has a diameter of 38.5 mm, providing improved torsional rigidity and stable load transmission in clamping operations. What surface finish does the clamp have? The Kukamet 242 is supplied with a black-blued finish, offering basic protection against corrosion and a consistent industrial appearance. Which SKU should be referenced when ordering or specifying the clamp? Refer to SKU 242-2-D-C1 to ensure the correct Kukamet 242 vertical clamp is specified. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 68mm Arm 1,500N Thrust, 5,000N Holding Force Black Oxide Massive Arm - Kukamet
Take advantage of a solid holding arm and a compact vertical foot combined with a holding force up to 5,000 N for reliable fixture performance. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Vertical clamp 242 — vertical clamping lever with solid holding arm and 5,000 N holding force by Kukamet Vertical clamp 242 is a compact, heavy‑duty clamping device intended for secure vertical fixturing in workshops and production environments *Solid holding arm, heavy-duty construction *Vertical foot for space-saving mounting *Max holding force 5,000 N *Patinated black finish, 68 mm arm Increased process reliability through concentrated clamping power The clamp delivers a holding force of up to 5,000 N and a pressing force rated at 1,500 N, providing dependable component retention during machining or assembly. In practical terms, the holding force indicates the maximum static grip the fixture can maintain, while the pressing force describes the clamping energy applied during engagement. These values translate into fewer repositioning operations and reduced cycle times, which supports consistent throughput in repetitive production tasks. Built for the clamping technology sector, the unit's performance reduces the risk of workpiece movement and scrap. Easy integration and compact mounting for flexible fixture layouts With a vertical foot mounting arrangement and a 68 mm arm, the device is suitable for space‑constrained fixtures and gantry stations where a low profile is essential. The vertical base allows the clamp to be anchored directly to plates or tooling blocks, simplifying layout design and shortening setup times. The compact format also makes it straightforward to place multiple clamps in close proximity, enabling balanced clamping across larger parts. Where quick reconfiguration is required, the rugged construction ensures repeatable alignment and minimal downtime during changeovers. Durable finish and robust construction for long service life The unit features a solid holding arm and a blackened, burnished finish that resists wear in daily shop‑floor conditions. The weight of approximately 1.186 kg and the sturdy build contribute to tactile stability when engaged; this robustness reduces the need for frequent replacement and supports lower total cost of ownership over the long run. Maintenance is straightforward: regular inspection of the lever and mounting points keeps clamping accuracy at specification. The product is designed for industrial use and complements existing tooling systems without complex retrofitting. Discuss application needs with Metav Werkzeuge — our specialists at Metav Werkzeuge can advise on fixture design and compatibility for Kukamet clamping elements; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data SKU: 242-4-D-C1 GTIN: 8682843520796 Weight: 1.186 kg Arm length: 68 mm Maximum holding force: 5,000 N Maximum pressing force: 1,500 N Mounting type: vertical foot Angle: 120° Material / finish: blackened, burnished Facts Category: Clamping technology Model designation: 242 Massiver Haltearm: yes Special features Solid holding arm Space-saving vertical base Robust industrial finish Compact footprint FAQ What is the maximum holding capacity of this clamp? The clamp provides a maximum holding force of 5,000 N; the pressing force during engagement is 1,500 N for secure retention. Can the clamp be mounted on standard fixture plates? Yes, the vertical foot design allows direct mounting to tooling plates and fixture blocks for compact integration. What does the 68 mm arm mean for practical use? A 68 mm arm indicates the projection from the mounting point to the clamping interface, balancing reach and rigidity for common workpiece sizes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 750 N Thrust, 2,500 N Hold Force, Black Oxide - Kukamet
Take advantage of the combination of compact design, reliable holding capability and a corrosion-resistant finish for dependable fixture work. Order the Vertical Clamp directly via Metav Werkzeuge or consult our specialists for tailored advice. Vertical Clamp 242 — vertical base lever clamp with 120° swing angle by Kukamet Vertical Clamp 242 is a robust lever-style vertical clamp designed for fixture and jig applications where space-saving mounting and consistent holding are required. Compact vertical base design Holding force 2,500 N Clamping force 750 N 120° swing angle for flexible positioning Consistent, measurable clamping performance for series operations The device delivers a holding force of 2,500 N and a clamping force of 750 N, values that define repeatable retention and secure pressure during handling or machining. The distinction between holding force (resistance to pull-out under load) and clamping force (applied compressive pressure at the clamp point) is crucial for fixture design; both figures enable planners to assess whether the component meets static and dynamic requirements. Measurable force ratings support quick comparison across clamps and reduce the need for iterative testing on the shop floor. Space-efficient mounting and ergonomic operation for tighter setups A vertical base mounting saves lateral space on assemblies and simplifies integration into stacked or side-by-side fixturing. The 120° swing angle increases positioning options, allowing the lever to be moved clear of tools or adjacent parts without disassembly. With a lightweight build (0.325 kg) the clamp minimises added mass on delicate jigs while remaining rigid under load. These characteristics shorten set-up times and support efficient workflows in repetitive production or repair tasks. Workshop durability and low-maintenance finish for everyday use The clamp is finished in blackened (black oxide) coating, offering corrosion resistance and reduced glare beneath machine lights. The lever-style mechanism provides rapid engagement and release, helping to speed cycle times while maintaining consistent pressure. The simple construction reduces maintenance needs; routine inspection and basic lubrication are sufficient to preserve function. As part of a reliable supply chain, the product benefits from quality control and availability through an established distribution partner for uninterrupted production planning. Request specification advice from Metav Werkzeuge or order the Vertical Clamp 242 via Metav Werkzeuge for a dependable addition to fixtures and jigs. Technical data SKU: 242-2 GTIN: 8680731505993 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Facts Weight: 0.325 kg Holding force: 2,500 N Clamping force: 750 N Swing angle: 120° Special features Vertical base mounting Blackened (black oxide) finish Lever clamp design Category: Spanner FAQ What forces are specified for this clamp? The Vertical Clamp 242 from Kukamet specifies a clamping force of 750 N and a holding force of 2,500 N, allowing straightforward selection for fixture requirements. Is the clamp suitable for vertical mounting in a compact fixture? Yes, the clamp features a vertical base for direct, space-saving installation in compact jigs and assemblies. What finish protects the clamp against corrosion? The clamp is supplied with a blackened (black oxide) finish, providing basic corrosion resistance and low surface reflectivity for workshop environments. How heavy is the clamp for fixture weight calculations? The device weighs 0.325 kg, supporting light-weight fixturing without compromising rigidity under specified loads. What is the SKU for ordering or referencing the product? The product is identified as SKU 242-2 and is supplied by Kukamet Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 86mm Massive Holding Arm 2000N Clamping Force 6000N Retaining Force Black Oxide Finish - Kukamet
Take advantage of a massive holding arm, holding force up to 6,000 N and a compact 86 mm reach for secure, repeatable fixturing; order the vertical clamp directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet Vertical clamp 242 — 86 mm arm, 6,000 N holding force The Vertical clamp 242 is a robust lever clamp for vertical mounting, designed for workshop fixtures and production jigs where secure, repeatable clamping is required Massive holding arm for high stability 86 mm arm reach for compact setups Holding force up to 6,000 N Vertical foot mounting for secure attachment Consistent high-force clamping for reliable production The clamp delivers a holding force up to 6,000 N while requiring an actuation force of 2,000 N, which translates into secure workholding without excessive operator effort. This performance improves cycle stability and reduces rework caused by slippage. The lever mechanism converts input force into a dependable clamping action, making the device suitable for repeated operations on assembly lines or machining fixtures. The documented force data enables planners to calculate safety margins and plan tooling layouts with confidence. Space-saving arm and secure vertical mounting A compact 86 mm arm reach and a vertical foot mounting ensure the clamp integrates into confined jigs and tooling stacks with minimal interference. The 120° operating angle provides a clear path for loading and unloading components while maintaining contact force across the clamped area. At a mass of 2.12 kg, the unit is substantial enough to remain stable in use yet compact to retrofit into existing fixtures. These dimensions support efficient layout planning and a lower overall machine footprint. Durable finish and robust construction for long service life The body features a blackened finish that provides basic corrosion resistance and a professional appearance, while the massive holding arm increases fatigue resistance under repetitive loads. The materials and hardwearing design reduce maintenance intervals and contribute to consistent clamping geometry over time. Routine checks of pivot points and mounting bolts are sufficient for preventive care, keeping downtime to a minimum and preserving clamp performance throughout production cycles. Ready for straightforward integration into tooling systems Designed as a lever-style vertical clamp, the unit is compatible with common fixturing conventions and can be mounted directly to machine tables or fixture plates using the vertical foot. The clear technical values—arm length, forces and angle—support rapid engineering decisions during fixture design. Metav’s quality-filtered stock in Emmerich ensures dependable supply and traceable sourcing for industrial buyers who prioritise continuity and component consistency in their toolroom procurement. Contact Metav Werkzeuge for tailored fixturing advice and a quotation for the Kukamet 242 vertical clamp, supplied from Emmerich with fast, reliable delivery Technical data Article number: 242-6-D-C1 GTIN: 8682843520840 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 86 mm Actuation force max: 2,000 N Holding force max: 6,000 N Operating angle: 120° Weight: 2.12 kg Special features Blackened finish Vertical foot mounting Massive holding arm Category: Clamps FAQ What is the difference between actuation and holding force? Actuation force is the input required to operate the lever; holding force is the clamping force maintained on the workpiece. The Kukamet Vertical clamp 242 converts an actuation force of 2,000 N into a holding force up to 6,000 N. Can the clamp be fitted to existing fixture plates? Yes. The clamp is designed for vertical foot mounting and can be bolted to standard fixture plates or machine tables, enabling straightforward retrofitting into existing jigs. Is the finish corrosion resistant for workshop use? The unit has a blackened finish that offers basic corrosion protection and a durable surface for workshop environments; periodic inspection of pivot points is recommended to maintain long-term performance. What types of applications suit this clamp? The clamp is suitable for production jigs, assembly fixtures and machining setups where repeatable, high-force clamping is required; its compact arm length and robust design favour tight or modular fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 88.5mm Massive Arm, 750N Press Force, 2,500N Holding Force, Blackened - Kukamet
Take advantage of the combination of high holding force, a massive holding arm and compact installation dimensions to keep fixtures secure and production running smoothly; order the clamp via Metav Werkzeuge or consult our specialists for application advice. 241 Vertical clamp by Kukamet — heavy-duty vertical clamping with 2,500 N holding force A 241 Vertical clamp engineered for secure vertical clamping in jigs, fixtures and assembly stations, featuring a robust holding arm and a compact horizontal-foot mounting for stable installation. Massive holding arm, robust construction 2,500 N holding force for secure fixturing 88.5 mm arm length for versatile reach Horizontal-foot mounting for stable installation Consistent retention for production-critical fixtures The 241 Vertical clamp delivers measurable stability where repeated clamping cycles and precise positioning matter. With a holding force of 2,500 N and a closing force of 750 N, the clamp separates the initial actuation from static retention: the lever provides controlled engagement while the body maintains steadfast grip. This distinction reduces workpiece shift during machining or assembly and supports reliable tolerances in mass production. The numeric force values allow planners to compare clamping performance objectively and to specify the clamp in technical documentation with confidence. Robust design minimises downtime and maintenance Constructed with a massive holding arm and a blackened finish, the clamp resists wear while presenting a low-reflectivity surface that is beneficial in inspection and welding environments. The 120° lever angle permits compact actuation paths and prevents interference with adjacent tooling. At just 0.32 kg, the unit is lightweight enough for easy handling yet engineered for durability under frequent use. These characteristics translate into fewer replacements and predictable service intervals, supporting efficient workshop workflows and lower total cost of ownership in production settings. Flexible integration into fixtures and tooling concepts The horizontal-foot mounting and an arm length of 88.5 mm make this clamp suitable for a wide range of fixture geometries and workpiece contours. The compact footprint and defined lever travel simplify fixture design, enabling closer packing of clamps on plates and reduced obstruction of part handling. Where repeatable clamping is required—such as in assembly lines, welding jigs or inspection fixtures—the combination of measured forces, compact dimensions and a robust arm offers a practical balance between performance and ease of installation. Choose the Kukamet 241 Vertical clamp for dependable fixture retention and contact Metav Werkzeuge for technical advice or to place an order — Metav Werkzeuge provides centralised supply and fast, reliable delivery from Emmerich to European workshops Technical data Article number: 241-2-D-C2 GTIN: 8682843520581 Manufacturer: Kukamet Facts Arm length: 88.5 mm Holding force: 2,500 N Closing force: 750 N Weight: 0.32 kg Angle: 120° Special features Horizontal-foot mounting Massive holding arm Blackened finish Category: Clamps / Spanner FAQ What clamping forces does the 241 Vertical clamp provide? The 241 Vertical clamp provides a closing force of 750 N and a static holding force of 2,500 N, enabling secure retention in fixtures and jigs. Is the clamp suitable for compact fixture layouts? Yes, the horizontal-foot mounting and 88.5 mm arm length make the clamp suitable for close-packed fixture arrangements and tight installation spaces. What is the lever angle and why does it matter? The lever operates at a 120° angle, which reduces the required actuation path and helps avoid interference with neighbouring components during clamping cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp Horizontal Base 7,000 N Clamping Force Blackened Finish - Kukamet
Take advantage of a compact design with a 7,000 N clamping force and a horizontal base for stable mounting; order the 221 vertical clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Kukamet 221 Vertical clamp – heavy-duty 7,000 N, horizontal base The 221 vertical clamp provides secure, repeatable holding for jigs and fixtures in production and workshop environments. Heavy-duty clamping force 7,000 N Horizontal base for stable mounting 120° lever angle for compact operation Blackened, burnished finish Secure holding power that keeps production moving With a rated clamping force of 7,000 N, this vertical clamping device delivers consistent pressure where it matters most. The high clamping force reduces part movement during machining and assembly, lowering the risk of rework and improving throughput. The mechanism’s lever action is designed for rapid engagement and release, enabling quicker cycle times in repetitive assembly or machining tasks while maintaining a reliable hold. Compact mounting that saves space on fixtures The horizontal base enables straightforward installation on flat fixture plates or machine tables, making the clamp easy to integrate into existing jigs. The 120° lever angle keeps the operating envelope small, which is particularly useful in compact setups or when multiple clamps are placed close together. At a weight of 0.94 kg, the unit combines portability with robustness, simplifying both temporary and permanent fixture configurations. Robust finish and straightforward durability A blackened, burnished surface finish offers a uniform appearance and a hard-wearing outer layer. The surface treatment supports daily workshop use and helps the clamp retain its functional look over time. The construction focuses on low-maintenance operation: the simple lever and toggle design minimises moving-part complexity, which supports long service intervals and predictable performance in demanding production routines. Contact Metav Werkzeuge for ordering details, delivery options and compatibility checks for the Kukamet 221 vertical clamp — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 221-4 GTIN: 8682843522714 Manufacturer: Kukamet EClass: 21041717 ETIM: EC011973 Facts Clamping force (max): 7,000 N Angle: 120° Weight: 0.94 kg Special features Mounting: horizontal base Finish: blackened, burnished Category: Clamp (Spanner) FAQ What is the maximum clamping force of the clamp? The Kukamet 221 vertical clamp delivers a maximum clamping force of 7,000 N, suitable for demanding holding tasks in fixtures and jigs. How is the clamp mounted and operated? The unit is mounted using its horizontal base and features a 120° lever angle for compact, ergonomic operation; the item is listed as SKU 221-4. Does the surface finish provide corrosion protection? The Kukamet 221 is supplied with a blackened, burnished surface finish; the product data specifies the finish but does not quantify corrosion resistance. What is the weight of the device and is it portable? The clamp weighs 0.94 kg, combining a lightweight profile with robust clamping capability for easy repositioning or integration into fixtures. Which applications suit this type of clamp? As a vertical toggle clamp with high clamping force, the 221 is well suited to production fixtures, jigs and assembly tasks where secure, repeatable holding is required Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp Horizontal Base, 11 kN Clamping Force, Black Oxide - Kukamet
Take advantage of a compact, high-force clamping solution that combines a maximum 11,000 N hold with a lightweight body for fast, repeatable fixturing; order the clamp directly via Metav Werkzeuge or consult the Metav team for integration advice. 221 Vertical Clamp by Kukamet — 11,000 N, horizontal foot mounting The 221 Vertical Clamp is a lever-operated vertical clamping device designed for secure workholding in jigs, fixtures and machine setups across metalworking environments 11,000 N clamping force for firm workholding Horizontal foot for stable base mounting 120° lever angle for ergonomic operation Blackened finish for corrosion resistance Consistent, measurable holding power for reliable production With a rated max. clamping force of 11,000 N, this vertical clamping unit delivers a clearly quantifiable holding capability that supports consistent machining and assembly cycles. The high force rating reduces slippage and rework, improving throughput and process reliability. The clamp’s lever clamp mechanism converts operator input into a secure hold with minimal set-up complexity, simplifying repetitive fixture tasks while keeping adjustments straightforward. Small footprint and proven ergonomics cut setup time Weighing 1.82 kg, the unit combines a compact profile with a stable base that minimises added mass on fixtures while remaining robust in service. The horizontal foot allows direct, low-profile mounting to tables and plates, saving space in crowded setups. A 120° lever travel offers an ergonomic operating angle that reduces operator effort during frequent clamp/unclamp cycles, helping to speed changeovers without compromising safety or repeatability. Surface treatment and mechanical resilience for workshop use The component is supplied with a blackened, burnished finish, providing basic surface protection and a professional appearance that integrates well into established tooling systems. The treated surface reduces visible wear and helps prevent surface corrosion in everyday shop conditions. The simple mechanical design keeps maintenance minimal and permits easy inspection of wear-prone parts, supporting long service intervals and dependable performance. Where this clamp fits into production processes Engineered for general-purpose vertical clamping tasks, the device is suitable for fixture plates, assembly jigs and secondary operations where a firm vertical hold is required. The combination of compact footprint and high clamping capacity makes it appropriate for both manual and semi-automated stations where space and repeatability matter. Installation is straightforward thanks to the horizontal mounting foot, enabling rapid retrofitting into existing tooling layouts. For tailored guidance on integrating Kukamet clamping solutions into a production line, contact Metav Werkzeuge in Emmerich — Metav’s specialists provide application support and reliable supply from the European stock at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 221-6 GTIN: 8680731505894 Manufacturer: Kukamet Weight: 1.82 kg Core specifications Max. clamping force: 11,000 N Lever angle: 120° Weight: 1.82 kg Design & features Horizontal foot mounting Blackened, burnished finish Lever-operated vertical clamp No additional special features FAQ What maximum holding force does the clamp provide? The 221 Vertical Clamp (Kukamet, SKU 221-6) provides a maximum clamping force of 11,000 N, offering high holding power for reliable fixturing. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot configuration; the clamp’s base is designed for secure bolting to plates and fixture surfaces. What is the significance of the 120° lever angle? A 120° lever travel gives an ergonomic operating position and comfortable actuation, reducing effort during repeated clamp cycles. What finish does the clamp have and what does it provide? The clamp is supplied with a blackened, burnished finish, which improves surface resistance to everyday wear and gives a professional appearance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp With 2000 N Thrust, Massive Holding Arm, Blackened Finish - Kukamet
Take advantage of a compact, heavy-duty clamp that combines a massive holding arm with reliable mounting and measurable clamping performance; order through Metav Werkzeuge for dependable supply and specification support. 241 Vertical Clamp by Kukamet — massive holding arm, horizontal-foot mounting 241 Vertical Clamp is a vertical lever clamp designed for secure workholding in assembly and machining tasks, fitted with a horizontal foot for stable fixture attachment. Massive holding arm for steady clamping Horizontal-foot mounting for simple installation 130 mm arm for extended reach Holding force 6,000 N for secure fixation Black blued finish for workshop durability Secure clamping performance that keeps production moving The clamp delivers a clear performance profile: a holding force of 6,000 N and a clamping (actuating) force of 2,000 N, providing repeatable fixation for medium to heavy-duty fixtures. These measurable values translate into predictable behaviour on the shop floor, reducing setup time and minimising rework. The mechanism is configured to maintain consistent pressure once engaged, which supports process stability and enhances throughput where reliable part retention is required. Robust arm and mounting for repeatable setup A 130 mm arm length extends reach without compromising stiffness, while the horizontal foot mounting simplifies integration into jigs or fixture plates. The massive holding arm and compact geometry reduce flex under load, so positioning remains exact from cycle to cycle. For production lines or machining centres that demand fast clamping actions and secure part retention, the solid construction supports rapid, repeatable set-ups and consistent component alignment. Workshop-ready finish and compact handling Finished in black blued steel, the clamp resists surface wear typical in workshop environments while maintaining a professional appearance. At approximately 2.222 kg, the unit is substantial enough for stable fixation yet compact for use in confined fixtures or assembly rigs. The combination of a durable surface treatment and modest mass makes the clamp suitable for frequent handling and long-term use without excessive maintenance demands. Easy integration into existing fixtures and toolrooms The clamp’s 120° operating angle and lever-style action facilitate rapid engagement and disengagement in assembly sequences. The toggle-style mechanism provides secure latching with a short actuation path, enabling ergonomic handling in repetitive operations. With a design that focuses on mechanical reliability and straightforward mounting, the clamp integrates into fixture arrays or bespoke tooling where dependable, quick clamping is an operational priority. The clear technical specification aids compatibility checks before installation. Contact Metav Werkzeuge for guidance on integrating the Kukamet 241 Vertical Clamp into production rigs and to benefit from direct supply and specification advice from our Emmerich centre — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data SKU: 241-6-D-C2 GTIN: 8680731507195 Model: 241 Category: Clamps eClass: 21041717 ETIM: EC011973 Facts Weight: 2.222 kg Arm length: 130 mm Holding force: 6,000 N Clamping force (actuating): 2,000 N Operating angle: 120° Special features Massive holding arm Horizontal foot mounting Black blued finish Toggle / lever clamp mechanism Robust construction for industrial use FAQ What holding and clamping forces does the clamp provide? The Kukamet 241 Vertical Clamp offers a holding force of 6,000 N and an actuating/clamping force of 2,000 N (SKU 241-6-D-C2), values suited to stable workholding in assembly and machining fixtures. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the clamp is delivered for secure attachment to a flat fixture plate or jig base. What reach does the clamp arm provide? The arm length is 130 mm, providing extended reach for parts that require clearance from the fixture base. Is the surface finish suitable for workshop environments? Yes. The clamp is supplied with a black blued finish that improves surface wear resistance and is appropriate for routine workshop use. What type of mechanism does the clamp use? The unit employs a toggle/lever clamp mechanism, designed for quick actuation and secure latching in repetitive operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp With 750 N Thrust, 2,500 N Holding Force, Black Oxide Finish - Kukamet
Take advantage of a compact, reliable clamping solution with a black blued finish and a horizontal foot for simple integration. The combination of a high holding force (2,500 N) and a defined clamping force (750 N) ensures stable workholding and consistent processing. Order the vertical clamp via Metav Werkzeuge or consult our advisers for tailored selection. Vertikalspanner 241 – vertical clamp with horizontal foot and black blued finish (Kukamet) The Vertikalspanner 241 is a compact vertical clamp designed for secure workholding with a horizontal mounting foot, suited to light-industrial fixtures and workshop jigs. Vertical clamp 241 with horizontal foot Black blued finish for corrosion protection Holding force up to 2,500 N Compact design, weight 0.325 kg Stable clamping for repeatable production The clamp delivers a holding force of 2,500 N and a clamping force of 750 N, providing measurable, repeatable retention for short-cycle fixtures and manual operations. These figures describe how much load the device can resist once set and how much downward force the actuator generates; both are relevant when specifying a fixture for vibration-prone machining or for assembly tasks where part slippage must be avoided. The compact, low-mass construction contributes to quick tool changes and reduces the inertial load on the fixturing system, supporting steadier cycle times on the shop floor. Compact mounting and straightforward integration With a horizontal foot for mounting and a 120° operating angle, the clamp integrates easily into existing fixture plates or custom jigs without requiring complex adapters. The small footprint and 0.325 kg mass permit close-packed arrangements on a fixture plate, enabling multiple clamps to be used where space is limited. The design philosophy prioritises practical installation and minimal interference with machining paths, so the clamp can serve in both prototyping benches and light production cells. Durable finish and low-maintenance operation The black blued finish provides corrosion resistance and a professional appearance while keeping maintenance simple. The surface treatment reduces the need for frequent reconditioning in standard workshop environments and helps preserve sliding and bearing surfaces. For users seeking steady performance over time, the combination of robust surface protection and a solid mechanical design supports predictable service intervals and lower lifecycle disruption. Contact Metav Werkzeuge for bespoke advice on integrating Kukamet vertical clamps into fixtures and to secure reliable supply directly from our Emmerich distribution centre Technical Data SKU: 241-2 GTIN: 8680731505979 Manufacturer: Kukamet Facts Weight: 0.325 kg Holding force: 2,500 N Clamping force: 750 N Operating angle: 120° Special features Material/finish: black blued finish Mounting: horizontal foot Category: vertical clamp FAQ What is the maximum holding force of this clamp? The clamp provides a holding force of 2,500 N as stated for the Vertikalspanner 241 (SKU 241-2 by Kukamet), suitable for many fixture applications requiring secure retention. Can the clamp be mounted directly to a fixture plate? Yes, the horizontal foot allows direct mounting to standard fixture plates; the compact design supports close placement of multiple clamps on a plate. Is the surface protected against corrosion? The black blued finish on the clamp provides corrosion resistance and helps reduce routine maintenance compared with untreated steel surfaces. For which applications is this clamp best suited? The clamp is intended for light-industrial and workshop fixtures where a compact vertical clamping element with defined clamping and holding forces is required. Does the clamp require special maintenance procedures? Routine inspection and standard lubrication of moving surfaces are sufficient; the durable finish reduces the frequency of reconditioning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp With Horizontal Foot, 2.5 kN Thrust, 6.5 kN Holding Force, Blackened Finish - Kukamet
Take advantage of dependable holding and decisive clamping performance combined with compact, service-friendly design for consistent fixture results. Order the vertical clamp directly via Metav Werkzeuge or ask the consultants for tailored mounting advice. Vertical clamp 225 — 120° toggle, 2,500 N clamping force (Kukamet) The Vertical clamp 225 is a compact toggle clamp designed for vertical clamping operations, suited to jigs and fixtures that require a sturdy horizontal base for fixation Vertical clamp with 120° toggle angle Holding force up to 6,500 N Clamping force 2,500 N Horizontal base for secure mounting Consistent, measurable clamping performance for production environments The design delivers reliable clamping force with a rated 2,500 N closing capacity and a much higher holding force of 6,500 N, making the unit suitable where sustained restraint is essential. These figures translate into predictable fixture behaviour under load and reduce the need for repeat adjustments during run-on production. The mechanism’s 120° toggle action ensures positive lock and rapid operation, speeding cycle times while maintaining repeatability. For specification-driven procurement, this clamp offers clear technical benchmarks that support process stability and auditability. Robust finish and secure mounting that minimise downtime A blackened finish provides surface protection against wear and everyday workshop contamination, prolonging service intervals and preserving appearance in visible assemblies. The clamp’s horizontal base simplifies integration into existing tooling plates or subplates and reduces auxiliary brackets, lowering preparation time before first use. At 2.1 kg, the component is easy to handle during fitting yet substantial enough to resist vibration in medium-duty applications. The combination of durable surface treatment and compact mass translates into fewer maintenance interventions and predictable life-cycle costs. Designed for efficient workflows and trusted supply Integrating this toggle clamp into jigs and production fixtures reduces setup time through its direct mount and positive-toggle action, improving throughput without complex adjustments. The compact footprint and solid mechanical design mean fixtures can be built smaller and positioned closer together, saving bench space and improving ergonomics. Sourced from Kukamet and offered via Metav Werkzeuge, the clamp benefits from Metav’s quality filtering and stock continuity, which supports reliable replenishment and consistent batch quality for industrial and trade customers. For robust, repeatable clamping from Kukamet, request technical advice or place an order through Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 225-6 GTIN: 8682843523827 Manufacturer: Kukamet Core specifications Clamping force (max): 2,500 N Holding force (max): 6,500 N Weight: 2.1 kg Angle: 120° Features & materials Mounting: horizontal base Finish: blackened (brünierte) Category: Vertical clamp EClass: 21041717 ETIM: EC011973 FAQ What is the difference between clamping force and holding force? Clamping force refers to the operative closing force of the mechanism (2,500 N for this clamp), while holding force describes the maximum retained load the clamp can resist without slipping (6,500 N for the 225 vertical clamp). Can the clamp be mounted on a jig plate with standard holes? Yes, the clamp features a horizontal base for direct mounting to fixture plates; use the base holes to secure the clamp to a subplate or jig with appropriate fasteners. Is the surface finish suitable for industrial environments? The blackened finish offers improved wear resistance and protection against light corrosion, making it suitable for workshop conditions and repeated handling. How heavy is the clamp and does that affect fixture design? At 2.1 kg the clamp is substantial enough to resist vibration but light enough for straightforward fitting; its mass supports stable operation without imposing excessive load on light-weight fixtures. Is this clamp suitable for repetitive production cycles? Yes, the toggle mechanism and positive lock at 120° are intended for repeated clamping cycles, providing rapid operation and reliable repeatability for jig and fixture applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp With Massive Holding Arm, 750 N Closing Force, 2,500 N Holding Force, Blackened - Kukamet
Take advantage of a robust, lever-type vertical clamp that pairs a massive holding arm with a compact footprint and clearly specified forces for reliable fixture work; order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. 241 Vertical Clamp by Kukamet — Massive holding arm, 120° operating angle A 241 Vertical Clamp engineered for secure vertical clamping in fixtures and jigs, combining a heavy-duty holding arm with horizontal-foot mounting for straightforward installation Massive holding arm for stable clamping 138.5 mm arm length for deep reach 2,500 N holding force for secure fixation Horizontal-foot mounting for simple installation Robust design for repeatable, heavy-duty clamping The clamp features a massive holding arm and a lever-style mechanism that delivers 2,500 N holding force alongside a 750 N clamping force, providing a clear distinction between fixation capability and direct clamping action. This separation improves process reliability in repeat setups: the high holding force secures the workpiece against lateral movement, while the clamping force generates the contact pressure required for a secure hold. The 120° operating angle supports aggressive engagement without sacrificing repeatability, making the component appropriate for precision jigs where consistent results are essential. Compact mounting that speeds up set-up and changeover Fitted with horizontal-foot mounting, the device installs quickly onto fixture plates or tooling boards, reducing set-up time in small-series and jobbing environments. The 138.5 mm arm length provides sufficient reach for parts located away from the datum plane while the unit’s 0.354 kg weight keeps the overall fixture mass low. These characteristics translate into faster changeovers and lower handling effort during assembly, which in turn supports higher throughput and fewer interruptions on the shop floor. Practical compatibility and workshop benefits Designed as a lever clamp for vertical applications, the unit integrates into conventional clamping schemes without complex adaptations. The blackened finish gives the component surface protection and a subdued appearance that fits industrial settings. Delivered as a compact, ready-to-fit element, it reduces the need for custom fabrication and helps standardise clamping across multiple stations. Combined with Metav’s quality control and distribution from Emmerich, this clamp offers a pragmatic path to consistent clamping performance in production and maintenance operations. For robust, repeatable clamping choose the Kukamet 241 vertical clamp and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and reliable supply. Technical Data Article number: 241-2-D-C3 GTIN: 8680731507188 Brand: Kukamet Facts Arm length: 138.5 mm Angle: 120° Weight: 0.354 kg Holding force (max): 2,500 N Clamping force (max): 750 N Special features Mounting: horizontal foot Finish: blackened finish Massive holding arm Lever clamp design FAQ What is the difference between holding force and clamping force? The 241 Vertical Clamp by Kukamet separates the two: the specified 2,500 N holding force resists movement of the workpiece once positioned, while the 750 N clamping force is the direct pressure applied to secure the part during processing. Can the clamp be mounted on standard fixture plates? Yes. The horizontal-foot mounting of the Kukamet 241 permits direct attachment to fixture plates and tooling boards, enabling quick integration into existing jigs. Is the arm length sufficient for offset parts? With a 138.5 mm reach, the arm on the Kukamet 241 is designed to access parts set back from the datum, offering practical clearance for many common fixture arrangements. What surface protection does the device have? The clamp is supplied with a blackened finish, providing surface protection and a low-reflective appearance suitable for industrial use. Which applications are suitable for this lever clamp? The Kukamet 241 is intended for vertical clamping tasks within fixtures and jigs, where repeatable fixation and compact mounting are required; it is suitable for production and workshop environments that use lever-style clamping solutions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertikalspanner, Haltearm mit 5000N Haltekraft, waagerechter Fuß, schwarz brüniert - Kukamet
Kukamet Vertikalspanner 222 überzeugt durch die Kombination aus robuster Haltekraft und kompakter Bauform; der massive Haltearm liefert 5000 N Haltekraft, die spezifizierte Druckkraft beträgt 1500 N, sodass wiederholbare und sichere Werkstückspannung gewährleistet ist. Kontakt und Bestellung über Metav möglich, technische Fragen gern per E‑Mail oder Telefon. Vertikalspanner 222 von Kukamet Der Vertikalspanner 222 ist ein kompakter Hebelspanner für präzise Werkstückspannung an Prüf‑ und Bearbeitungsplätzen. Vertikalspanner »222« von Kukamet Haltearm: 5000 N Haltekraft Druckkraft: 1500 N Befestigung: waagerechter Fuß Gewicht: 1,18 kg Robuste Spannung für wiederholbare Ergebnisse Der Haltearm des Spanners sorgt für stabile Fixierung und überträgt Kräfte zuverlässig, sodass Bearbeitungs‑ und Messprozesse reproduzierbar bleiben. Die Kombination aus 5000 N Haltekraft und einer Druckkraft von 1500 N ermöglicht sicherere Spannpositionen bei kleinen bis mittleren Werkstücken. Dieses Kraftprofil reduziert Nachspannungen und minimiert Stillstandzeiten in der Werkstatt. Kompakte Bauform erleichtert Einbau und Handhabung Dank des geringen Gewichts von 1,18 kg und der Auslegung auf einen waagerechten Fuß ist die Montage einfach und flexibel möglich. Die kompakte Konstruktion erlaubt die Integration in beengte Vorrichtungen und Prüfstände, ohne zusätzliche Ballastgewichte oder aufwändige Umrüstungen. Die geringe Masse unterstützt schnelle Einrichtprozesse und vereinfacht Handhabung sowie Lagerung. Präzision durch konstruktive Details Der Spanner arbeitet mit einem Winkel von 120°, der sichere Haltepunkte auch bei schräger Belastung bietet. Die Oberfläche ist schwarz brüniert ausgeführt, was Korrosionsschutz mit geringer Reibung verbindet und die Lebensdauer der Maschine unterstützt. Solche konstruktiven Merkmale tragen direkt zur Prozesssicherheit bei und schonen Spann‑ sowie Werkstückoberflächen. Vielseitiger Einsatz in Werkstatt und Produktion Als Hebelspanner eignet sich das Produkt für Spannaufgaben an Mess‑, Montage‑ und Bearbeitungsplätzen. Die Kombination aus Haltekraft und kompakten Abmessungen macht den Spanner geeignet für schnelle Wechselvorrichtungen, Prüfvorrichtungen und manuelle Spannplätze. Anwender profitieren von kürzeren Rüstzeiten und höherer Wiederholgenauigkeit bei Serien‑ und Einzelteilprüfungen. Einfache Montage und sichere Befestigung Der waagerechte Fuß erlaubt stabile Befestigung auf Maschinentisch oder Vorrichtung, Bohrbild und Schraubbefestigung richten sich nach der vorhandenen Vorrichtung. Die Handhabung ist auf Alltagstauglichkeit ausgelegt, sodass Umrüstungen ohne großen Aufwand möglich sind. Ersatzteilbedarf bleibt gering, wodurch Betriebsbereitschaft und Verfügbarkeit gesteigert werden. Empfehlung: Metav für Kauf und Beratung zum Kukamet Vertikalspanner 222 kontaktieren – E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 222-4-C Marke: Kukamet Bezeichnung: Vertikalspanner 222 Daten Druckkraft: 1500 N Haltekraft: 5000 N Winkel: 120° Gewicht: 1,18 kg Besonderheiten Befestigungsart: waagerechter Fuß Material: schwarz brüniert Haltearm mit 5000 N Haltekraft Hebelspanner FAQ Ist der Vertikalspanner 222 für Serienprüfstände geeignet? Der Vertikalspanner 222 von Kukamet ist aufgrund der hohen Haltekraft von 5000 N und der kompakten Bauform gut für Serienprüfstände geeignet; die robuste Konstruktion erlaubt wiederholbare Fixierung bei kurzen Rüstzeiten. Wie wird der Kukamet Vertikalspanner 222 montiert? Die Montage erfolgt über den waagerechten Fuß; übliche Schraubbefestigung an Maschinentisch oder Vorrichtung ist vorgesehen, wodurch eine sichere und formschlüssige Verbindung entsteht. Was bedeutet Haltekraft in Bezug auf den Vertikalspanner 222? Die Haltekraft beschreibt die maximale Zug‑/Halteleistung des Haltearms; beim Vertikalspanner 222 beträgt diese 5000 N und definiert die Belastungsgrenze für formstabile Fixierung ohne Verrutschen. Eignet sich das Gerät für präzise Messaufgaben? Ja, die konstruktive Auslegung und die definierten Kraftwerte des Kukamet Vertikalspanner 222 unterstützen präzise Messaufgaben, da Vibrationen und Verschiebungen durch die hohe Haltekraft reduziert werden. Welche Pflege ist für den Vertikalspanner 222 vorgesehen? Regelmäßige Sichtprüfung und leichte Schmierung der beweglichen Teile reichen in der Regel aus; bei Bedarf empfiehlt sich die Rückfrage beim Händler oder die technische Beratung von Metav mit Angabe der Artikelnummer 222-4-C.
125mm Vertical Clamp With Angle Foot, 800 N Clamping Force, 1100 N Holding Force - AMF
Take advantage of the compact Size 1 design and an angled foot for flexible fixturing, combined with reliable clamping performance—800 N pressing force and 1,100 N holding force—to keep setups secure and reduce rework. Order the vertical clamp directly via Metav Werkzeuge or consult the team for application advice. Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF — vertical clamp with angled foot, Size 1 (AMF) A Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF is a vertical clamping device intended for compact fixtures and machine-table applications where a small footprint and stable holding are required. Vertical clamp with angled foot Size 1 for compact fixture use Max clamping force 800 N Holding force up to 1,100 N Secure workholding that lowers cycle risks and scrap The vertical clamp offers a controlled combination of pressing and holding forces—800 N pressing force for active clamping and 1,100 N holding force for static retention—which translates into fewer part movements during machining and less rework. The clamping action is concentrated and predictable, making the device suitable where repeatable part location and process stability are essential. Reliable holding reduces set-up corrections and supports efficient production flows in jigs and fixtures. Compact mounting and straightforward integration Installation is simplified by the compact Size 1 geometry and the angled foot, which allows mounting in constrained spaces or at non‑orthogonal positions on fixture plates. The device is supplied with a pressure screw specified as M5 x 30, and a series of precise dimensional data (A = 5 mm; B = 34.5 mm; C = 14 mm; H1 = 125 mm; L1 = 61 mm) ensures predictable integration into assemblies. These measurable values let engineers plan clearances and fastenings in advance, avoiding on‑the‑fly adjustments and minimising downtime during set-up. Built for consistent performance and dependable sourcing Manufactured by AMF, the clamp is designed for workshop and small-scale production environments where compact, repeatable clamping is required. Paired with Metav’s distribution and quality filtering from Emmerich, purchasing this clamping device gives access to reliable stock and expert advice. The combination of a purpose‑built clamping geometry and a recognised supplier network helps maintain throughput and parts quality across serial set‑ups and bespoke jigging tasks. For tailored advice on integrating the AMF vertical clamp into existing fixtures and for supply from Metav Werkzeuge, please contact Metav Werkzeuge in Emmerich for prompt support and reliable delivery. Technical Data Article number: 4123590100NW Type: 6803 Label: Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF Product type: Senkrechtspanner Execution: mit Winkelfuß Manufacturer: AMF Packaging unit: 1 Facts Max pressing force: 800 N Max holding force: 1,100 N A [mm]: 5 B [mm]: 34.5 C [mm]: 14 D [mm]: 4.5 E [mm]: 18 F [mm]: 7 H [mm]: 45 H1 [mm]: 125 I [mm]: 10 K [mm]: 10 L1 [mm]: 61 M [mm]: 20 N [mm]: 30 O [mm]: 5 P [mm]: 30 a [°]: 98 Pressure screw: M5 x 30 Special features Size: 1 With angled foot Pressure screw M5 x 30 Compact footprint for tight fixtures Suitable for jig and fixture mounting FAQ What clamping and holding forces does the vertical clamp provide? The Senkrechtspanner Nr.6803 Gr.1 Winkelfuß AMF offers a pressing force of 800 N and a holding force up to 1,100 N, providing secure retention for many fixture tasks. How is the clamp mounted in a fixture? Mounting uses the angled foot configuration and the integrated pressure screw (M5 x 30); the dimensional data (for example L1 = 61 mm, H1 = 125 mm) supports precise placement within a jig or on a machine table. Is Size 1 suitable for compact or multi‑station fixtures? Size 1 is aimed at compact fixture designs and multi‑station arrangements where a small footprint and predictable clamping behaviour are required. Are spare or replacement pressure screws available for this clamp? The clamp uses a standard M5 x 30 pressure screw; compatible replacement screws can be specified to the same thread and length to maintain the original clamping performance. What quality assurances support this clamping device? The device is an AMF vertical clamp distributed via Metav Werkzeuge; material traceability and dimensional specification enable consistent assembly and repeatable performance in production fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com