CPMT 060202 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide wear resistance, precise 80° rhombic geometry and a secure clamping hole for consistent turning performance; longevity and predictable chip control reduce downtime. Order the CPMT060202 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 060202 T6215 indexable insert for turning by Tungaloy — CVD-coated carbide, 80° rhombic CPMT060202 T6215 is a CVD-coated carbide indexable insert designed for turning applications where wear resistance and reliable edge stability are required, particularly when machining rostfreier Stahl under stable to slightly interrupted cutting conditions. CVD-coated carbide for high wear resistance 80° rhombic geometry for robust cutting edge Cylindrical hole with single-side countersink Corner radius 0.2 mm for fine surface finishing Greater uptime through durable CVD coating and material choice The CVD-coated carbide grade T6215 delivers enhanced wear resistance and helps maintain edge integrity over extended runs. For production environments that prioritise uptime, the coating increases tool life and reduces the frequency of index changes, which in turn supports a steadier production flow. The insert’s substrate and coating combination is optimised for machining rostfreier Stahl, so material-specific challenges such as built-up edge and rapid flank wear are mitigated, producing more consistent component tolerances and fewer unscheduled tool interventions. Stable cutting performance with 80° rhombic form and chip control An 80° rhombic geometry provides a balanced compromise between edge strength and accessibility for external and internal turning. The single-sided chipbreaker and selected edge preparation promote predictable chip formation under stable to lightly interrupted cuts, reducing the risk of chatter and improving surface finish. This geometry also enhances cutting stability when working with medium-duty feeds and depths, so operators can expect reliable repeatability when swapping inserts between compatible ISO turning holders. Secure clamping and repeatability for efficient tool handling The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) to ensure precise, repeatable seating in compatible holders. The defined 11° relief angle and a thickness of 2.38 mm contribute to firm clamping and accurate axial positioning, which simplifies set-up and reduces the need for incremental adjustments. Repeatable mounting minimises process variation across batches and supports faster tool changeovers on the shop floor. Fine finishing and dimensional control with small corner radius A 0.2 mm corner radius enables refined surface finishing while maintaining sufficient edge strength for regular production turning. This feature is particularly advantageous when producing components with tight surface roughness requirements or when a small radiused edge is required to meet dimensional tolerances. Combined with the insert’s robust substrate and coating, the small radius helps achieve the desired balance between smooth surface quality and tool life. Opt for the Tungaloy T6215 indexable insert for reliable turning of rostfreier Stahl and contact Metav Werkzeuge for availability and tailored application advice. Technical data Article number: 6945220 Manufacturer SKU: TUN6945220 SKU: 6945220-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: T6215 (CVD-coated) Numbers / Core technical data Insert designation: CPMT060202 ISO code: 060202 Corner radius: 0.2 mm Relief angle: 11° Included angle: 80° Thickness: 2.38 mm Size: 06 Countersink angle: 40°–60° Special features / Versions Rhombic insert shape With cylindrical hole and single-side countersink Single-sided chipbreaker CVD-coated carbide grade for wear resistance Suited for turning (Außen- und Innendrehen) Compatible with ISO-standard turning holders Intended for rostfreier Stahl under stable to lightly interrupted conditions FAQ What materials is this insert best suited for? The CPMT060202 T6215 indexable insert is specifically designed for machining rostfreier Stahl and performs well under stable to slightly interrupted turning conditions. How does the CVD coating benefit production runs? The CVD-coated T6215 grade increases wear resistance and prolongs edge life, which reduces index changes and contributes to longer continuous production cycles with fewer interruptions. Is this insert compatible with standard ISO turning holders? Yes, the insert follows ISO dimensions and is compatible with holders that match the insert’s form, free angle, tolerance class, fastening and thickness specifications. What function does the cylindrical hole with countersink provide? The cylindrical hole and single-side countersink ensure secure and repeatable clamping, improving positional accuracy and simplifying tool changeovers on the machine. Can this insert be used for internal and external turning? The geometry and chip control make the insert suitable for both external and internal turning operations when paired with the appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, precise ISO geometry and robust chip control for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. CPMT060202 T6215 Tungaloy indexable insert — ISO rhombic turning insert for rostfreier Stahl The CPMT060202 T6215 Tungaloy insert is an ISO-standard rhombic indexable insert designed for external and internal turning under stable to lightly interrupted conditions, optimised for machining rostfreier Stahl. ISO rhombic insert CPMT060202 CVD-coated carbide, grade T6215 11° relief angle for stable cutting Suitable for rostfreier Stahl turning High-performance cutting for rostfreier Stahl with reliable tool life The combination of a CVD-coated surface and the T6215 wear-resistant grade provides a balance of hardness and toughness that reduces flank wear in demanding rostfreier Stahl operations. The coated cutting edge maintains a sharp profile for longer intervals, which translates into improved surface finish and fewer insert changes. As a consequence, cycle times are stabilised and process reliability increases in continuous production runs or repetitive batches. ISO conformity and secure clamping for consistent results Designed as an ISO-standard insert, this rhombic 06 geometry features a 0.2 mm corner radius and a 2.38 mm thickness, ensuring predictable engagement with compatible holders. The insert’s cylindrical hole with a one-sided countersink (40°–60°) and 11° relief angle support secure and repeatable clamping. This predictable interface simplifies tool setup: choosing a matching holder and correct tolerance class ensures concentricity and reduces vibration, which benefits both tool life and part quality. Practical application advice and process advantages With a single-sided chipbreaker and a geometry tuned to straight turning operations, this insert is especially suited to external and internal turning where stability is good or only slight interruptions occur. The controlled chip formation reduces rework and supports efficient swarf evacuation, helping to keep cycle times low. For mixed-production environments, the insert’s balanced performance reduces the need for frequent grade swaps, making it a pragmatic choice for manufacturers seeking consistent outputs from rostfreier Stahl components. Contact Metav Werkzeuge today to discuss the CPMT060202 T6215 application or request tailored cutting-data sheets from our advisors at Metav Werkzeuge Technical data Article number: 6951187 Manufacturer SKU: TUN6951187 Model series: ISO-Drehwendeschneidplatten Designation: CPMT060202 T6215 Data Corner radius: 0.2 mm Insert size: 06 Thickness: 2.38 mm Relief angle: 11° Insert angle: 80° Special features Material: carbide Coating: CVD Grade: T6215 Plate shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Typical use: turning (external and internal) ISO designation: CPMT060202 FAQ What materials is this insert designed for? The CPMT060202 T6215 indexable insert from Tungaloy is intended primarily for rostfreier Stahl applications and offers wear-resistant performance on similar alloys. Which holder type is compatible with this ISO insert? Compatibility is determined by form, relief angle, tolerance class, fastening and insert size; the CPMT060202 requires a holder that accepts rhombic 06 inserts with a central cylindrical hole and matching clamping geometry. How does the T6215 grade affect cutting performance? The T6215 CVD-coated grade combines wear resistance and edge stability to extend tool life and maintain consistent surface finish during rostfreier Stahl turning. Is this insert suitable for interrupted cuts? The insert is optimised for stable to lightly interrupted conditions; for heavy interruptions, consult cutting data or Metav Werkzeuge’s advisors for alternative geometries or grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 T9215 Wendeplatten - Tungaloy
Benefit from the CPMT060202 T9215 insert’s combination of high wear resistance and reliable fracture resistance for steady, productive turning of medium steels; its rhombic 80° geometry and 0.2 mm corner radius provide controlled chip formation and consistent surface finishes. Order the insert directly via Metav Werkzeuge or consult our specialists for matching holder and process parameters. CPMT 060202 T9215 Tungaloy turning insert — CVD-coated carbide, ISO rhombic 80° geometry The CPMT060202 T9215 is an ISO-format rhombic turning insert designed for external and internal turning, combining a CVD-coated carbide grade with a single-sided chipbreaker for medium-steel machining. CVD-coated carbide grade T9215 Optimised for medium steel machining Rhombic ISO insert, 80° included angle Single-sided chipbreaker, cylindrical hole Increased throughput through wear-resistant carbide grade The CVD-coated carbide grade T9215 is formulated to balance wear resistance with fracture toughness, making it suitable for continuous to lightly interrupted turning of medium steels. This composition enables longer tool life and reduced downtime, which directly improves throughput in production environments. Selecting this grade reduces the frequency of index changes and contributes to a predictable process window, supporting stable cycle times and consistent component quality. Reliable seating and versatile holder compatibility The ISO rhombic geometry with an 80° included angle and an 11° relief creates a robust support surface that limits deflection under load and helps maintain dimensional accuracy. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping and easy centring. Compatibility with a specific holder is determined by the plate form, relief angle, tolerance class, fastening method, size and thickness; this standardised approach simplifies inventory management and ensures interchangeability across ISO-format toolholders. Controlled chip formation and surface finish benefits The single-sided chipbreaker together with the 0.2 mm corner radius supports stable chip control and repeatable surface finishes on medium steels. The modest corner radius is a practical compromise: it helps to avoid premature edge chipping while enabling fine-profile turning where a smooth finish is required. For operations that require different cutting geometries, selecting an alternate chipbreaker or radius within the same ISO format allows adaptation without changing clamping systems, reducing setup complexity. Practical advantages for workshop efficiency Using an ISO-format, indexable insert reduces tooling costs by enabling multi-edge use and simple replacement. The plate’s 2.38 mm thickness and standard 06 size provide compatibility with a wide range of external and boring holders, lowering storage complexity. For shops prioritising productivity, the combination of grade, geometry and chip control translates into fewer interventions, more consistent part quality and an improved cost-per-component metric. The insert’s specification also supports straightforward process documentation and reproducibility across shifts. Contact Metav Werkzeuge for assistance specifying the right holder and chipbreaker for the CPMT060202 T9215 or request ordering and availability details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951184 SKU: 6951184-Tungaloy Manufacturer SKU: TUN6951184 Name: CPMT060202 T9215 Tungaloy turning insert Facts Corner radius: 0.2 mm Relief angle: 11° Included angle: 80° Plate thickness: 2.38 mm Plate size: 06 Countersink angle: 40°–60° Special features Material: carbide (Hartmetall) Coating / grade: T9215 (CVD-coated) Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink Application: turning (external and internal) Typical use: medium steel; continuous to light interrupted cuts Compatibility criteria: form, relief angle, tolerance class, fastening, size, thickness FAQ What workpieces is this insert best suited to? The CPMT060202 T9215 Tungaloy turning insert (SKU 6951184-Tungaloy) is optimised for medium-steel workpieces, offering a balance of wear resistance and toughness suitable for continuous and lightly interrupted turning. How does the chipbreaker affect performance? The single-sided chipbreaker on this indexable insert promotes controlled chip formation and evacuation; combined with the 0.2 mm corner radius it supports consistent surface quality in standard turning operations. Is the insert compatible with standard ISO holders? Compatibility depends on holder match to the ISO plate form, relief angle, tolerance class, fastening method, size and thickness; the CPMT060202 format fits holders designed for 06-size rhombic plates with the corresponding clamping geometry. What does the T9215 grade provide compared with other grades? T9215 is a CVD-coated carbide grade engineered for mid-range steel machining; it provides improved wear resistance while maintaining fracture safety, enabling reliable productivity in production turning. Can the insert be used for interrupted cuts? Yes — the grade and geometry are suitable for continuous to lightly interrupted cuts; severe interruptions may require a different geometry or tougher grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a fine 0.2 mm nose radius and ISO compatibility to achieve stable, productive turning in medium steel; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. CPMT060202 T9215 ISO indexable turning insert — CVD-coated carbide, 11° relief (turning) — Tungaloy The CPMT060202 T9215 is an ISO-standard indexable turning insert designed for external and internal turning; it pairs a CVD-coated carbide substrate with a single-sided chipbreaker for productive medium-steel machining. CPMT 06 rhombic insert, 80° included angle CVD-coated carbide grade T9215 for steel 11° relief angle with 0.2 mm nose radius Cylindrical hole with single-side countersink Consistent productivity for medium-steel turning The combination of T9215 grade and a CVD-coated carbide construction delivers elevated wear resistance while retaining fracture toughness, making the insert particularly effective for continuous to light interrupted cuts on medium steels. The result is longer tool life and fewer indexings per component batch, which improves throughput and reduces handling time. The specified chipbreaker geometry supports reliable chip formation, which lowers the risk of workpiece damage and helps maintain consistent surface finish over long production runs. Clear engineering data that supports safe set-up Critical dimensions are specified to ensure correct seating and repeatability in standard ISO holders: plate size 06 with a rhombic outline, plate thickness 2.38 mm, nose radius 0.2 mm and a finish relief of 11°, with an 80° included angle. These measures determine cutting performance and mechanical stability in the holder. The cylindrical hole with a single-side countersink (40°–60°) secures positive clamping and correct axial positioning. Understanding these values helps to match the insert to the correct toolholder and clamping set for predictable machining results. Improved chip control and longer tool life The one-sided chipbreaker and the CVD wear layer are engineered to control chips and protect the cutting edge under typical turning feeds and speeds for medium steels. Stable chip formation reduces vibration and heat concentration at the cutting zone, which in turn extends edge life and maintains dimensional consistency of workpieces. Selecting the appropriate chipbreaker and grade in conjunction with adequate machine rigidity and cutting parameters delivers measurable gains in process reliability and part quality. Practical compatibility and mounting advice This ISO-format insert integrates into a standard indexable tooling system comprising a matching external holder or boring bar, a precision shim or clamp set and the correct replacement screw. Compatibility is governed by form, free angle, tolerance class, fixation style, size and thickness, so verifying these parameters ensures correct assembly and repeatable performance. For intermittent cuts or less rigid set-ups, pairing this insert with a holder that offers enhanced support and damping improves stability and reduces the likelihood of premature edge chipping. For expert selection of Tungaloy turning inserts and immediate supply, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss application matching and availability Technical Data Article number: 6772442 Manufacturer SKU: TUN6772442 SKU: 6772442-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Designation: CPMT060202 Grade: T9215 Facts Plate thickness: 2.38 mm Nose radius: 0.2 mm Relief angle: 11° Included angle: 80° Plate size: 06 Hole: cylindrical hole with single-side countersink (40°–60°) Special features Rhombic plate form (CPMT) Single-sided chipbreaker CVD-coated carbide substrate Suitable for external and internal turning Optimised for medium-steel machining, continuous to light interrupted cuts ISO-standard geometry for holder compatibility FAQ What materials is this insert suited for? The CPMT060202 T9215 insert is optimised for medium steel machining; the T9215 grade and CVD-coated carbide construction combine wear resistance and toughness for stable turning. What are the key dimensions to check when selecting a holder? Verify plate size (06), plate thickness (2.38 mm), relief angle (11°), nose radius (0.2 mm) and the hole/countersink style to ensure the insert seats and clamps correctly in the chosen toolholder. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation and evacuation under typical turning conditions, which supports surface quality and reduces thermal load on the cutting edge. Can this insert be used for interrupted cuts? The CPMT060202 T9215 is designed for continuous to light interrupted cuts; for heavier interruptions, choose a more robust geometry or review clamping and machine rigidity to prevent edge damage. Is the insert compatible with standard ISO toolholders? Yes, the insert follows ISO geometry conventions; compatibility depends on matching the insert form, free angle, tolerance, fixation and thickness with the intended holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable geometry and easy holder compatibility for consistent medium-steel turning. Order the inserts directly via Metav Werkzeuge or consult the team for holder matching and grade selection. CPMT 060202 T9215 Turning indexable insert by Tungaloy — rhombic, 11° clearance The CPMT 060202 T9215 is an ISO rhombic turning insert designed for medium-steel applications; it pairs a CVD-coated carbide grade with a single-sided chipbreaker to deliver stable chip formation and high productivity in continuous to lightly interrupted cuts CVD-coated carbide grade T9215 Rhombic 80° geometry for versatile turning 11° clearance angle for reduced rubbing Single-sided chipbreaker with hole High productivity through wear-resistant grade and coating The combination of CVD-coated carbide and the T9215 grade gives a measurable advantage in wear resistance and fracture safety during medium-steel turning. The coating reduces flank and crater wear, which leads to longer intervals between indexings and fewer tool changes. As a result, machine uptime is increased and cycle times are more predictable. The insert is suitable for continuous to lightly interrupted cuts, where consistent edge integrity supports higher feed rates and steady component quality. Reliable geometry and positive cutting behaviour for repeatable results The rhombic shape with an 80° included angle and an 11° clearance promotes secure engagement and lower cutting forces in a broad range of turning operations. The 0.2 mm corner radius delivers a defined cutting edge for improved surface finish while limiting edge chipping on interrupted cuts. The insert is supplied with hole and a cylindrical hole with a single-sided countersink (40°–60°), enabling stable clamping and straightforward compatibility with ISO holders when form, tolerance and thickness are matched. Reduced downtime and straightforward process integration A single-sided chipbreaker simplifies chip control for typical medium-steel workpieces and helps maintain coolant access and surface integrity. The insert forms part of a complete system: ISO turning insert, matching external holder or boring bar, shims and screws. This system approach makes tool setup and replacement predictable, reducing unplanned downtime. For material-specific recommendations or holder matching, Metav Werkzeuge provides technical guidance and data to ensure correct selection and reliable performance For high-throughput medium-steel turning with the proven T9215 grade, contact Metav Werkzeuge to confirm holder compatibility and current availability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951144 SKU: 6951144-Tungaloy Manufacturer SKU: TUN6951144 Model series: ISO turning indexable inserts Facts Size: 06 ISO designation: CPMT060202 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Insert angle: 80° Special features Material: cemented carbide Coating: CVD Grade: T9215 Shape: rhombic With hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Turning Typical use: medium-steel machining FAQ What materials is this insert best suited for? The CPMT 060202 T9215 insert is optimised for medium-steel machining; the CVD-coated carbide grade offers a balance of wear resistance and toughness for continuous to slightly interrupted cuts. How does the insert secure to the holder? Clamping compatibility depends on form, clearance, tolerance class, fixation method, size and thickness; the CPMT060202 is supplied with a cylindrical hole and a single-side countersink to ensure secure seating in ISO holders. What distinguishes the T9215 grade from other grades? T9215 is a CVD-coated tungsten carbide grade engineered for strong wear resistance with good fracture safety, supporting higher productivity in medium-steel turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9225 toughness, precise 80° rhombic geometry and effective single-sided chip control to maintain steady machining cycles and reduce rework. Order the insert directly via Metav Werkzeuge or consult our specialists for application optimisation. CPMT 060202 T9225 Turning insert by Tungaloy — rhombic ISO turning insert, CVD-coated carbide for medium to heavy steel The CPMT060202 insert is an ISO‑standard rhombic turning insert designed for reliable external and internal turning where varying engagement conditions require a tougher grade and secure chip control ISO rhombic insert, 80° geometry CVD-coated carbide T9225 for steel Single-sided chipbreaker, r0.2 2.38 mm thickness, central hole & countersink Process security and productivity from a robust cutting grade The CVD-coated T9225 grade delivers a balance of toughness and wear resistance suited to medium to heavy steel machining, which helps to stabilise cutting forces under lightly interrupted or variable engagement. Using this grade reduces insert failure and unplanned stoppages, so cycle times are more predictable and tool changes are needed less frequently. The combination of the coating and the carbide substrate is engineered to sustain a consistent cutting edge, supporting higher productivity on production lines. Geometry and chip control for cleaner turning operations An 80° rhombic geometry with a 0.2 mm corner radius offers an effective compromise between strength and edge definition for turning operations that demand both form accuracy and surface quality. The single-sided chipbreaker directs chips reliably away from the cut, reducing the risk of re-cutting and improving surface finish. Because chip formation is stabilised, downstream processes such as part handling and inspection are simplified, contributing to a smoother manufacturing flow. Compatibility and mounting considerations for reliable integration These ISO turning inserts follow standard dimensions and attachment styles so compatibility with matched holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The central cylindrical hole with one-sided countersink (40°–60°) ensures secure clamping in many conventional indexable holders. When a complete system is specified — insert, pocket, clamp and screw — predictable repeatability and toolholder stability are achieved, which enhances repeatable part tolerances. Practical benefits: selection, lifecycle and application fit With a nominal thickness of 2.38 mm and an ISO designation that aligns with common toolholder systems, this insert simplifies inventory and tool management. The grade is intended as a universal choice where moderately heavy cuts or mixed cutting conditions occur, making it suitable for batch production and job-shop environments alike. Selecting the correct chipbreaker and matching the insert to the workpiece material will extend tool life and improve surface integrity, delivering measurable cost-efficiency over multiple runs. For process-secure turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for tailored advice and rapid supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6951145 Manufacturer SKU: TUN6951145 ISO designation: CPMT060202 Model series: ISO turning indexable inserts Core data Insert size: 06 Thickness: 2.38 mm Corner radius: 0.2 mm Geometry angle: 80° Relief angle: 11° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Coating: CVD-coated Grade: T9225 Chipbreaker: single-sided Insert form: rhombic Typical application: external and internal turning System: ISO indexable insert system FAQ What materials is this insert designed for? The CPMT060202 T9225 insert from Tungaloy is optimised for machining steel and is particularly suitable for medium to heavy steel turning tasks. How does the chipbreaker affect performance? The single-sided chipbreaker on the Tungaloy insert promotes stable chip formation and evacuation, which improves surface finish and reduces re-cutting during turning operations. Will this insert fit standard holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the CPMT060202 is made to ISO dimensions for use with matching ISO holders. What are the advantages of the T9225 grade? T9225 is a robust universal grade offering good toughness under variable engagement, helping to prevent edge chipping and extending service life in mixed cutting conditions. Which edge radius and thickness are provided? This indexable insert features a 0.2 mm corner radius and a 2.38 mm plate thickness, balancing strength and finish capability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide T9225 and an 80° geometry ensure stable performance in medium to heavy steel turning; the 0.2 mm corner radius and one-sided chipbreaker deliver predictable chip control and consistent surface quality — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CPMT 060202 T9225 — Turning insert by Tungaloy (ISO, CVD-coated carbide) CPMT060202 T9225 Tungaloy insert is an ISO-standard indexable turning insert designed for external and internal turning in steel machining, offering a balance of toughness and wear resistance. CPMT060202 indexable insert, 80° geometry CVD-coated carbide grade T9225 for robust turning 0.2 mm corner radius, rhombic shape, 11° relief Cylindrical hole with single-side countersink Reliable performance for demanding steel turning The CVD-coated carbide grade T9225 has been developed as a robust universal grade for medium to heavy steel machining where variable engagement or light interruptions require additional toughness. The coating enhances wear resistance while the substrate maintains edge strength, which together extend tool life and reduce downtime. In production terms, this means fewer insert changes and more consistent cycle times, contributing to a measurable improvement in process efficiency without sacrificing cutting-edge durability. Consistent compatibility and secure clamping As an ISO-standard indexable plate, compatibility with a holder is defined by form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters minimises setup errors and ensures repeatable performance. The insert’s cylindrical hole with single-side countersink provides a secure seating and reliable clamping interface, so the cutting geometry remains stable under varying cutting forces. The 80° approach geometry supports both external and internal operations, reducing the need for multiple specialised plate types and simplifying tool inventory. Precision geometry for controlled chips and improved finish The combination of a 0.2 mm corner radius and a one-sided chipbreaker yields controlled chip formation and stable cutting behaviour, particularly under higher feed rates and interrupted cuts. The 11° relief angle and 2.38 mm plate thickness contribute to vibration dampening and consistent tool rigidity, which helps to achieve the desired surface finish with fewer rework cycles. Where alternating cutting conditions occur, this insert provides a pragmatic compromise between edge strength and cutting precision, making it suitable for versatile production environments. For applications prioritising robust steel turning and stable chip control, request the Tungaloy CPMT060202 T9225 insert through Metav Werkzeuge or contact Metav Werkzeuge’s specialists for tailored selection and availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6951185 Manufacturer SKU: TUN6951185 SKU: 6951185-Tungaloy Material: carbide Core specifications Geometry angle: 80° Corner radius: 0.2 mm Relief angle: 11° Thickness: 2.38 mm Size: 06 Special features Grade/coating: T9225, CVD-coated carbide Shape: rhombic, one-sided chipbreaker Hole: cylindrical with single-side countersink (40°–60°) Application: turning (external and internal) FAQ Which materials is this insert intended for? The CPMT060202 T9225 Tungaloy indexable insert is intended primarily for medium to heavy steel machining and performs well where changes in engagement or light interrupted cuts demand higher toughness. Is the insert suitable for interrupted cuts? Yes. The T9225 grade provides increased toughness and the one-sided chipbreaker supports interrupted and variable cutting conditions with improved chip control. How is compatibility with a toolholder ensured? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the CPMT060202 dimensioning conforms to ISO standards for predictable fitting. What benefits does the CVD coating provide? The CVD-coated carbide in the T9225 grade enhances wear resistance while preserving substrate toughness, which together improve tool life and process stability during demanding turning operations. How should the insert be mounted? The CPMT060202 insert uses a cylindrical hole with a single-side countersink (40°–60°) and should be mounted with a compatible clamping system, underlay/klemmsatz and correct replacement screws for secure seating. What is the manufacturer article number and SKU for ordering? Manufacturer article number: 6951185; SKU: 6951185-Tungaloy (manufacturer SKU: TUN6951185). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9225, standard ISO compatibility and robust geometry for steady production performance; order the CPMT060202 T9225 insert directly via Metav Werkzeuge or request advice from our consultants for matching holders and cutting parameters. CPMT 060202 T9225 — Indexable turning insert for Turning by Tungaloy The CPMT060202 T9225 is an ISO‑standard rhombic indexable insert engineered for external and internal turning, offering a CVD‑coated carbide grade optimised for medium to heavy Stahl machining. CVD-coated carbide grade T9225 Robust universal grade for medium/heavy cuts 80° rhombic geometry with 0.2 mm radius Cylindrical hole with 40°–60° countersink Consistent performance in medium to heavy turning The combination of CVD‑coated carbide and the T9225 grade delivers a balance of wear resistance and toughness that suited to interrupted cuts and variable engagement. This material pairing extends tool life under fluctuating conditions and reduces the frequency of index changes, which supports a more predictable production flow. For operations that require steady material removal in Stahl and related alloys, the insert’s design prioritises stable cutting edge behaviour, lowering the risk of premature edge failure and contributing to consistent component quality. Geometry and fit that ensure repeatable accuracy Built to ISO dimensions, the rhombic 80° form and 0.2 mm corner radius provide secure seating and repeatable contact with compatible holders. The insert’s 11° free angle and 2.38 mm thickness are decisive for clearance, clamping stability and stiffness at the cutting zone. The cylindrical hole with a one‑sided countersink (40°–60°) facilitates reliable fastening and ensures the plate locates precisely in standard clamping systems. Matching holder form, free angle and tolerance class is essential for safe use and repeatable part geometry. Practical benefits for workshop efficiency and surface quality Using a robust universal grade like this Tungaloy variant simplifies inventory: one grade covers a broad range of operations across Stahl and rostfreier Stahl, reducing tool types to manage. The single‑sided chipbreaker helps maintain predictable chip control, particularly in medium‑depth cuts, and supports good surface finishes without excessive rework. Together, these characteristics improve machine uptime and can contribute to higher overall productivity by lowering tool change frequency and stabilising cycle times. Choose the right system components for reliable results The cutting plate performs best as part of a complete system: a matched external holder or boring bar, a supporting shim or clamping set, and correct replacement screws ensure safe clamping and optimal force distribution. When replacing plates, confirm that the holder’s form and tolerance class align with ISO specifications, and select a chipbreaker and grade suited to workpiece material and stability. The CPMT060202 T9225 insert is optimised for turning operations where robustness and repeatability are priorities. Contact Metav Werkzeuge for tailored holder recommendations, cutting data and stock availability for the Tungaloy CPMT060202 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert technical support and rapid delivery. Technical data Article number: 6781030 SKU: 6781030-Tungaloy Manufacturer SKU: TUN6781030 Facts Thickness: 2.38 mm Corner radius: 0.2 mm Relief (free) angle: 11° Shape angle: 80° Size: 06 Special features Coating: CVD Grade: T9225 Material: carbide Hole: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Plate form: rhombic Application: Turning Model series: ISO indexable turning inserts FAQ What materials is this insert best suited for? The CPMT060202 T9225 is optimised for Stahl machining and performs well in rostfreier Stahl where the combination of toughness and wear resistance from the CVD‑coated carbide is required. How does the CPMT060202 T9225 handle interrupted cuts? The T9225 grade provides increased toughness, so the Tungaloy CPMT060202 insert resists chipping during light interruptions and maintains edge stability over extended cycles. Is the insert compatible with standard ISO holders? Yes; the plate is ISO‑dimensioned. Compatibility depends on matching form, free angle, tolerance class, clamping method, size and thickness with the chosen holder. Which chip control can be expected from this geometry? The single‑sided chipbreaker delivers controlled chip formation in typical turning operations, supporting consistent surface finish and easier chip evacuation. What information should be provided when ordering replacements? When ordering, reference the CPMT060202 T9225 designation along with the manufacturer SKU TUN6781030 to ensure correct grade, hole style and geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH120 Wendeplatten - Tungaloy
Take advantage of proven PVD-coated carbide performance and the stable AH120 grade for process-safe turning; the combination of sharp cutting edge and robust chip control supports consistent cycle times and reduced tool changes. Order the insert directly via Metav Werkzeuge or request specialist advice from our consultants. CPMT 060204 AH120 indexable turning insert by Tungaloy — 80° rhombic, PVD-coated carbide A CPMT 060204 AH120 indexable insert designed for ISO‑standard external and internal turning, offering a sharp cutting edge and high process reliability for precision metalcutting. ISO 80° rhombic geometry PVD-coated carbide grade AH120 0.4 mm corner radius 2.38 mm thickness, with mounting hole Long-lasting PVD coating and grade for stable productivity The PVD-coated carbide composition provides a balance between wear resistance and edge toughness. The AH120 grade is engineered to resist chipping while maintaining a sharp cutting edge, which translates into fewer interruptions for edge dressing and a steadier surface finish. For production environments requiring predictable tool life, the coated carbide reduces flank wear and supports longer uninterrupted runs, improving overall equipment efficiency. Geometry and dimensions that widen application scope The rhombic 80° geometry with an 11° relief angle offers a versatile approach to both external and internal turning operations. The insert’s 0.4 mm corner radius and 2.38 mm thickness provide a compromise between strength and edge definition, suitable for precise finishing and general turning tasks. The central mounting arrangement — a cylindrical hole with a single‑sided 40°–60° countersink — ensures secure clamping and compatibility with a wide range of ISO holders when form, relief angle, tolerance class, clamping and size match. Controlled chip formation for consistent process security Equipped with a single-sided chipbreaker, the insert promotes reliable chip control when selected to match workpiece material, machining strategy and machine rigidity. Stable chip formation lowers the risk of built-up edge and helps maintain cutting parameters, supporting consistent component quality. In short production sequences where process reliability is essential, this combination of chip control and a resilient cutting grade reduces scrap rates and rework. System integration and economic advantages As an ISO‑standard indexable insert, the plate is intended to form part of a complete system — insert, suitable external holder or boring bar, clamping set and replacement screws. Correct pairing with a compatible holder ensures the CPMT 060204 AH120 performs as specified, delivering repeatable results and minimised setup time. The result is improved machine uptime and a favourable cost per component through longer tool life and reduced changeovers. For specific application matching or toolpath optimisation, in‑house technical advice can clarify the best chipbreaker and holder combination. For procurement, specification support or to discuss the benefits of the Tungaloy CPMT 060204 AH120 for your turning processes, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to request application guidance and availability. Technical data Manufacturer article number: 6852444 SKU: 6852444-Tungaloy Designation: CPMT 060204 AH120 Model series: ISO turning indexable inserts Data Geometry: rhombic, 80° Relief angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 06 Special features Material: PVD-coated carbide (AH120) Chipformer: single-sided chipbreaker Mounting: with hole — cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Compatibility note: holder compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What are the primary benefits of the AH120 grade? The AH120 grade delivers a wear‑resistant PVD coating with improved edge stability; the Tungaloy CPMT 060204 AH120 is designed to reduce chipping and maintain surface quality over extended cycles. Which operations suit the CPMT 060204 AH120 best? This insert is intended for ISO‑standard external and internal turning where a sharp cutting edge and process security are required. How does the insert’s geometry affect performance? The 80° rhombic geometry and 11° relief angle offer a balance between strength and accessibility, while the 0.4 mm corner radius supports accurate finishes and dimensional control. What should be considered when selecting a holder? Compatibility depends on the insert form, relief angle, tolerance class, clamping method, size and thickness; matching these ensures correct seating and repeatable performance. How does the chipbreaker influence machining? The single‑sided chipbreaker facilitates predictable chip flow and helps avoid built‑up edge when matched to the workpiece material and cutting conditions, improving process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide and the universal AH6225 grade for consistently stable machining of stainless steels; the combination of a 0.4 mm corner radius and ISO rhombic geometry ensures a balanced edge for medium turning operations and variable conditions. Order genuine Tungaloy inserts through Metav Werkzeuge or consult the team for application-specific recommendations. CPMT060204 AH6225 ISO turning insert for turning — Tungaloy A CPMT060204 AH6225 indexable turning insert engineered for medium turning of stainless steels, offering a sharp yet robust cutting edge in ISO format. PVD-coated carbide grade AH6225 Designed for stainless steels Rhombic ISO insert, 80° included angle 0.4 mm corner radius, with hole Stable cutting in stainless steels for consistent part quality The universal AH6225 grade is a PVD-coated carbide designed specifically for machining stainless steels under varying conditions. The coating enhances wear resistance and maintains a sharp, stable cutting edge, which reduces the need for frequent insert changes and supports steady cycle times. For production environments that require predictable tool life and less downtime, this grade offers an effective balance between edge life and surface finish. The result is improved process stability and reliable dimensional repeatability on turned components. Geometry and dimensions that support secure clamping and repeatability The rhombic ISO geometry with an 80° included angle and 11° clearance delivers straightforward clamping with standard external holders and boring bars. The insert’s 0.4 mm corner radius provides an optimal compromise between edge strength and surface finish, while the 2.38 mm thickness contributes to rigidity during axial and radial cuts. The central cylindrical hole with one-sided countersink (40°–60°) ensures consistent seating and torque transmission of the fastening screw, promoting repeatable positioning and vibration resistance in serial production. Practical advantages in shop-floor applications A one-sided chipbreaker suits many common turning tasks; select the chipbreaker and grade according to workpiece material, machining type and machine/tool stability. The ISO insert is intended for both external and internal turning; matching holder form, clearance angle and tolerance class is essential for optimal performance. The one-sided chipbreaker and the insert’s geometry help control swarf flow and protect the edge during interrupted cuts, while the PVD coating reduces adhesion when machining tough stainless alloys. These features translate into fewer tool changes and a more productive machining cycle. Specification-led selection and implementation guidance Compatibility with a holder is determined by the insert’s form, clearance angle, tolerance class, fastening style, size and thickness. Where process security and surface integrity are priorities, pairing this grade with a stable clamping system and appropriate cutting data will maximise tool life. For applications that demand predictable wear behaviour and repeatable results, the ISO-format insert offers straightforward integration into existing toolsets and allows quick replacement without complex adjustments. For tailored tooling advice and to secure genuine Tungaloy CPMT060204 AH6225 inserts for production turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-specific support. Technical data Article number: 6951194 Manufacturer SKU: TUN6951194 Model series: ISO turning inserts Designation: CPMT060204 AH6225 Facts Size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Coating / grade: AH6225, PVD-coated carbide Shape: rhombic Chipbreaker: one-sided Application: turning (external and internal) Compatibility: ISO-format insert for standard external holders and boring bars FAQ Which materials is this insert best suited for? The AH6225 grade is optimised for stainless steels; the CPMT060204 AH6225 insert provides a sharp, stable edge suited to medium turning operations on stainless alloys. How does the insert secure into the holder? The insert uses a central cylindrical hole with a one-sided countersink (40°–60°) for secure fastening; correct seating and tolerance class ensure repeatable clamping and positioning. What surface finish can be expected with this geometry? With a 0.4 mm corner radius and the PVD-coated carbide grade, the insert delivers a good surface finish for medium cutting conditions while maintaining edge strength for consistent results. Is this insert suitable for interrupted cuts or unstable setups? The one-sided chipbreaker and robust cutting edge make the insert tolerant to many interrupted cuts; however, optimal performance requires a stable clamping arrangement and appropriate cutting data. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the ISO rhombic format and the CPMT060204 designation enable use with standard ISO external holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH6225 Wendeplatten - Tungaloy
High-performance PVD-coated carbide grade AH6225 delivers a sharp yet stable cutting edge and consistent chip control for efficient turning of stainless steels; order the CPMT060204 AH6225 insert directly via Metav Werkzeuge or request application advice from our consultants. CPMT060204 AH6225 – Tungaloy turning insert, PVD-coated carbide, 0.4 mm radius The CPMT060204 AH6225 is an ISO rhombic indexable insert for turning, engineered for medium machining of stainless steels with a balance of sharpness and edge stability. ISO rhombic insert CPMT060204 PVD-coated carbide AH6225 Optimised for stainless steel turning 0.4 mm corner radius for fine finish Consistent performance with PVD-coated carbide for stainless steels The grade AH6225 is a PVD-coated carbide developed to combine a sharp cutting edge with the robustness required for changing and demanding stainless steel conditions. This balance reduces built-up edge and improves surface finish, while the coating increases wear resistance under interrupted cuts. The result is higher process stability and predictable tool life, which supports planning and reduces unplanned downtime in serial production. ISO compatibility and secure clamping for fast changeovers Designed as an ISO-standard indexable plate, compatibility with holders depends on plate form, relief angle 11°, tolerance class, fastening and plate thickness. The insert’s cylindrical hole with one-sided countersink (40°–60°) ensures repeatable seating and secure clamping in indexable holders, while the 2.38 mm plate thickness contributes to rigidity under axial loads. These features make replacement straightforward and minimise machining interruptions when tool changes are required. Practical selection and operational advantages for turning The single-sided chipbreaker promotes controlled chip formation when matched to feed and depth of cut, improving chip control and workshop safety. The 0.4 mm corner radius supports fine surface finishes on external and internal turning operations without sacrificing edge strength, especially in less stable set-ups. For best results on stainless steels, pair the insert with stable toolholding, moderate cutting speeds and adequate coolant strategy; this approach enhances process security and delivers efficient material removal with consistent part quality. For tailored machining recommendations or to reserve CPMT060204 AH6225 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947671 SKU: 6947671-Tungaloy Manufacturer SKU: TUN6947671 Model series: ISO indexable turning inserts Grade: AH6225 Material: Carbide Intended application: Turning Facts ISO designation: 060204 Size: 06 Plate thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 80° Hole: with hole Countersink angle: 40°–60° Special features PVD-coated carbide grade AH6225 One-sided chipbreaker Rhombic plate form Cylindrical hole with one-sided countersink Suitable for external and internal turning FAQ Which materials is this insert best suited for? The CPMT060204 AH6225 insert from Tungaloy is optimised for machining stainless steels, providing improved edge stability and wear resistance under varying cutting conditions. How is the insert fixed in the holder? Fixing is achieved via the insert’s cylindrical hole with a one-sided countersink (40°–60°), allowing secure clamping and repeatable seating in compatible ISO holders. What effect does a 0.4 mm corner radius have on the part finish? A 0.4 mm corner radius produces a finer surface finish and reduced cutting forces when compared with larger radii, while maintaining sufficient edge strength for medium cutting operations. Is AH6225 a coated grade? Yes, AH6225 is a PVD-coated carbide grade designed by Tungaloy for a balance of sharpness and durability on stainless steels. Can the insert be used for internal turning? Yes, the insert is suitable for both external and internal turning; selecting the correct chipbreaker and stable tooling setup ensures best performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH6225 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade and an 80° rhombic geometry yields predictable performance and reduced tool-change frequency; order directly via Metav Werkzeuge or consult the specialists for holder compatibility and optimal chipbreaker selection. CPMT060204 AH6225 — Tungaloy ISO turning indexable insert for turning, PVD-coated carbide A CPMT060204 AH6225 indexable insert designed for ISO-standard turning operations; optimised for stainless-steel applications with a sharp yet robust cutting edge and standard mounting features for secure clamping. PVD-coated carbide grade AH6225 Universal for stainless steel turning Rhombic 80° geometry, 0.4 mm radius Cylindrical hole with single-side countersink Predictable fit and simple ISO compatibility The insert follows ISO norms, so compatibility with holders is governed by form, relief angle, tolerance class, fastening style, size and thickness rather than proprietary geometry. That standardisation simplifies tooling logistics and reduces the effort of selection: matching a standard CPMT insert to a compatible outer holder or boring bar, plus the correct shim and clamping set, avoids costly trial-and-error. The inclusion of a cylindrical hole with a single-side countersink (40°–60°) ensures secure fastening and repeatable seating, which translates into a steady production process and predictable downtimes. Enhanced cutting performance for stainless steels The AH6225 grade is a PVD-coated carbide designed as a universal solution for stainless steel machining. The combination of a comparatively sharp cutting edge and a stable substrate delivers a balance between reduced cutting forces and edge retention under medium machining conditions. The PVD coating improves resistance to built-up edge and thermal wear, leading to more consistent part surface quality and fewer unscheduled insert changes. In practice, this means longer uninterrupted runs and a better cost-in-use profile when processing reactive or work-hardening stainless alloys. Practical geometry and application guidance The 80° rhombic geometry with a 0.4 mm corner radius is suited to both external and internal turning where a compromise between finish and edge strength is required. The 2.38 mm plate thickness and 11° clearance angle support stable mounting and effective chip control when paired with the correct one-sided chipbreaker for the chosen operation. A 0.4 mm radius improves edge strength compared with very fine radii while still allowing acceptable surface finish on turned faces; select a smaller or larger radius only if the machining strategy or part specification explicitly demands it. For system set-up, ensure the holder profile, tolerances and screw type match the ISO designation to maintain clamping integrity and repeatable cutting geometry. For tailored application advice on the Tungaloy CPMT060204 AH6225 insert and suitable holder combinations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss optimal chipbreakers and machining parameters Technical data Article number: 6903280-Tungaloy Manufacturer article number: 6903280 Manufacturer SKU: TUN6903280 Model series: ISO-Drehwendeschneidplatten Designation: CPMT060204 AH6225 Facts Plate size: 06 Included angle: 80° Corner radius: 0.4 mm Plate thickness: 2.38 mm Clearance angle: 11° Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Carbide substrate, PVD-coated Grade AH6225 (universal for stainless steels) Rhombic plate form One-sided chipbreaker ISO-standard turning insert System: insert + outer holder or boring bar + shim/clamping set and replacement screws FAQ Is this insert suitable for stainless-steel turning? The AH6225 grade is formulated for stainless steel turning; the CPMT060204 insert offers a sharp yet stable cutting edge suited to medium operations on such alloys. Which holder types are compatible with this ISO insert? Compatibility is defined by the insert form, relief angle, tolerance class, fastening and thickness — the ISO designation CPMT060204 matches standard ISO external holders and boring bars when the holder specification references the same insert code. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm radius increases edge strength and tends to produce a robust finish; for finer surface requirements, a smaller radius or an alternate insert geometry should be selected. Does the insert require a specific chipbreaker? Chipbreaker choice should be matched to the workpiece material, machining type and machine stability; the supplied one-sided chipbreaker suits general turning but can be changed for heavy roughing or fine finishing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH6225 Wendeplatten - Tungaloy
Reliable turning performance results from the combination of a PVD-coated AH6225 cutting grade and a precisely defined 0.4 mm corner radius, giving consistent cutting edges and steady tool life in medium turning operations. Order the CPMT060204 AH6225 insert directly via Metav Werkzeuge or ask our consultants for compatibility support. CPMT 060204 AH6225 Turning Insert (ISO) — PVD-coated carbide, 0.4 mm radius | Tungaloy A CPMT060204 AH6225 indexable turning insert for ISO-compliant external and internal turning, engineered for reliable medium cutting on stainless steels. PVD-coated AH6225 carbide Optimised for stainless steels 0.4 mm corner radius Cylindrical hole with countersink Stable edge geometry for repeatable medium turning The insert offers a combination of a PVD-coated surface and a robust AH6225 carbide grade that preserves edge integrity under changing cutting conditions. This composition reduces flank wear and helps maintain consistent dimensional tolerances during longer runs. The 0.4 mm corner radius supports a balanced compromise between strength and cutting accuracy, ensuring predictable tool behaviour when facing interrupted cuts or variable feed rates. Easy matching to ISO holders and secure mounting Integration into existing tooling systems is straightforward because the insert follows ISO plate conventions. Compatibility with a specific holder depends on form, 11° clearance angle, tolerance class, fastening method, size and thickness; these parameters should be checked against the toolholder specification before use. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°), enabling positive clamping and repeatable seating for secure performance in both external and internal turning setups. Why the AH6225 grade and PVD coating matter The AH6225 grade is a PVD-coated cemented carbide engineered as a universal grade for stainless steels, optimised to produce a sharp yet stable cutting edge during medium machining. The PVD-coating adds surface hardness and reduces adhesion when machining sticky or work-hardening alloys, contributing to improved tool life and higher process stability. For operators who require a reliable, general-purpose solution on rostfreie Stähle, this grade simplifies grade selection and reduces downtime for insert changes. Practical advantages in production environments Using this ISO-compliant indexable insert supports efficient tool management and inventory standardisation. The rhombic plate form and specified geometry enable effective chip control when paired with the correct single-sided chipbreaker and cutting parameters. This leads to fewer interruptions, more predictable tool change intervals and ultimately a smoother production flow. For shops balancing finish requirements and tool life, the combination of geometry and grade provides a cost-effective compromise between productivity and surface quality. Contact Metav Werkzeuge for a tailored tooling consultation on Tungaloy turning solutions and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and fast availability. Technical data Article number: 6951165 Manufacturer SKU: TUN6951165 SKU: 6951165-Tungaloy Model series: ISO indexable turning inserts Application: Turning Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Plate size: 06 Plate thickness: 2.38 mm Manufacturer article number: 6951165 Special features Material: cemented carbide Coating: PVD Grade: AH6225 Chipbreaker: single-sided Plate form: rhombic Mounting: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) ISO compatibility — holder match depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CPMT060204 AH6225 insert is optimised for stainless steels and performs well in medium-turning applications where a sharp, stable edge is required. Which toolholders are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening, size and thickness; verify these parameters against the CPMT060204 dimensions and the holder documentation. How does the PVD coating benefit machining? The PVD-coated surface on the AH6225 grade increases surface hardness and reduces adhesion, improving wear resistance and process stability when machining stainless steels. What mounting features ensure repeatable seating? The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) for secure clamping and repeatable seating in ISO-compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH6235 Wendeplatten - Tungaloy
Take advantage of a tough PVD-coated carbide grade AH6235 and the stable 80° rhombic geometry for reliable turning of stainless steel and interrupted cuts; order the insert directly via Metav Werkzeuge or consult the team for application advice. CPMT 060204 AH6235 Tungaloy ISO turning insert — PVD-coated carbide, 80° rhombic A CPMT 060204 AH6235 turning insert engineered for external and internal turning, optimised for stainless steel and operations with elevated breakout risk PVD-coated carbide grade AH6235 For stainless steel and interrupted cuts Rhombic insert, 80° cutting angle Single-sided chipbreaker, 0.4 mm corner radius Consistent cutting performance for demanding stainless steel applications The CPMT 060204 AH6235 insert combines a PVD-coated carbide substrate with a tougher, breakout-resistant grade to deliver steady cutting in work on stainless steel and similar alloys. The 80° rhombic geometry provides a robust cutting edge that tolerates variations in engagement, while the 0.4 mm corner radius balances edge strength with surface finish. This configuration reduces the likelihood of premature edge failure during interrupted cuts, so cycle times remain predictable and scrap is minimised. Where chatter or instability is a concern, the rhombic form and compact corner radius help maintain a controlled chip flow and consistent tool life. Simple clamping and ISO compatibility to reduce setup uncertainty Designed as an ISO-standard insert, compatibility with holders is determined by form, 11° relief angle, tolerance class, fastening method, size and 2.38 mm thickness. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°), ensuring secure seating and repeatable positioning in compatible external holders or boring bars. The overall system comprises the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws; this common architecture simplifies procurement and reduces spare-part complexity on the shop floor. Clear knowledge of holder geometry and fastening style avoids misfits and accelerates changeovers. Productivity gains and practical application guidance The single-sided chipbreaker is tuned for general turning duties and interrupted operations, enabling stable chip control across a range of cutting parameters. Selecting the right chipbreaker and cutting data for the chosen grade will usually result in longer tool life and fewer unplanned stops, directly supporting higher throughput. For best results, pair the insert with a rigid setup, adjust feeds to the chosen corner radius, and favour coolant or minimum-quantity lubrication where thermal softening is an issue. The tougher grade helps absorb peak loads, offering a practical balance between economy and performance while delivering repeatable surface quality. Request tailored application guidance for Tungaloy AH6235 inserts from Metav Werkzeuge — specialists can advise on holder selection, cutting data and sample trials; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6903460 SKU: 6903460-Tungaloy Manufacturer SKU: TUN6903460 Model series: ISO-Drehwendeschneidplatten Material: carbide Application: Turning Facts Corner radius: 0.4 mm Cutting angle: 80° Relief angle: 11° Thickness: 2.38 mm Plate size: 06 Hole style: with hole Special features Grade/coating: AH6235 (PVD-coated carbide) Chipbreaker: single-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Shape: rhombic Suitable for stainless steel and interrupted cuts System components: ISO insert; external holder/boring bar; shim/clamp; spare screws FAQ What materials is this insert designed for? The CPMT 060204 AH6235 insert is optimised for stainless steel and is suitable for interrupted cuts and applications with a higher risk of breakout. How does the AH6235 grade improve performance? AH6235 is a tougher PVD-coated carbide grade that increases resistance to chipping and improves tool life in demanding turning operations, particularly on stainless steel. Which holders fit this ISO insert? Compatibility depends on holder form, tolerance class, fastening, size and thickness; the insert’s cylindrical hole with a single-sided countersink (40°–60°) ensures secure mounting in matching ISO external holders or boring bars. What cutting geometry should be used with the 0.4 mm radius? For the 0.4 mm corner radius, moderate feeds and rigid clamping yield the best balance between surface finish and edge life; the single-sided chipbreaker supports stable chip control under these conditions. Can this insert be used for internal turning? Yes, the CPMT 060204 AH6235 is suitable for both external and internal turning when paired with the appropriate boring bar and correct clamping components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH725 Wendeplatten - Tungaloy
Take advantage of a universally applicable, PVD‑coated carbide insert that combines AH725 grade toughness with precise geometry for consistent cycle times and fewer tool changes; order the CPMT060204 AH725 insert via Metav Werkzeuge or contact our consultants for machining advice. CPMT 060204 AH725 — Tungaloy turning insert (ISO CPMT, PVD carbide, 0.4 mm radius) The CPMT060204 AH725 is an ISO‑standard turning insert engineered for reliable external and internal turning of steel and stainless steel components in demanding production environments. ISO CPMT insert, size 06 (060204) PVD‑coated carbide grade AH725 0.4 mm nose radius for tight contours Cylindrical hole with single‑side countersink Consistent process security with a universal PVD grade The PVD‑coated AH725 cutting grade delivers a balance of toughness and wear resistance suited to mixed batches and changing workpiece materials. As a PVD‑coated carbide grade, it tolerates fluctuating cutting conditions and reduces the risk of edge chipping on small tools, which supports higher process security and fewer interrupted cycles. This results in a measurable reduction in unplanned downtime and a steadier production flow, particularly where frequent material changes occur between mild steel and stainless steel. Geometry that ensures dimensional accuracy and surface quality The rhombic CPMT shape and precise edge geometry produce repeatable results in both facing and profile turning. With an included angle of 80°, a 0.4 mm nose radius and 11° clearance, the configuration is optimised to maintain cutting engagement and to give controlled chip flow. The 2.38 mm plate thickness and the ISO standard sizing simplify matching to compatible toolholders; compatibility is defined by form, relief angle, tolerance class, fastening method, size and thickness, so correct holder selection preserves part tolerances and extends tool life. Efficient chip control and machining economy Equipped with a one‑sided chipbreaker, the insert promotes reliable chip segmentation and evacuation during both light and interrupted cuts. The combination of the chipbreaker geometry and the PVD coating improves thermal stability at the cutting edge, which helps to maintain a superior surface finish and reduce flank wear. For production shops this means fewer tool changes, lower tooling consumption per part and a more economical machining process overall. Secure mounting and system compatibility for straightforward handling The insert features a cylindrical hole with a single‑side countersink (40°–60°), which ensures positive seating and secure clamping with standard screws and underlay/clamp sets. The insert forms part of a system comprising the indexable insert, a matching external holder or boring bar, an underlay/clamp set and replacement screws. This system approach simplifies inventory management and makes it straightforward to replace cutters without lengthy set‑up times, particularly in high‑mix production environments. For maximum process security with the Tungaloy AH725 grade, request availability and machining advice from Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856770 Manufacturer article number: 6856770 Our SKU: 6856770-Tungaloy Manufacturer SKU: TUN6856770 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Numbers / Core technical data Size designation: 06 (060204) ISO code: 060204 Radius: 0.4 mm Relief/clearance angle: 11° Included angle: 80° Thickness: 2.38 mm Design / Special features Rhombic plate form (CPMT) PVD‑coated carbide, grade AH725 One‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Application: turning System components: insert, holder/boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert suitable for? The insert is designed for machining steel and stainless steel; the AH725 grade offers a universal, break‑resistant performance for varying alloys. How is holder compatibility determined? Compatibility depends on insert form, relief angle, tolerance class, fastening style, size and thickness; the CPMT form and 2.38 mm thickness must match the chosen holder. What advantage does the AH725 grade provide? AH725 provides a robust, universal performance with stable chip formation and good resistance to edge breakage, making it appropriate for mixed‑material batches and demanding production demands. How does the hole and countersink influence mounting? The cylindrical hole with a single‑side countersink ensures secure seating and correct clamping torque, improving repeatability and reducing the risk of insert movement under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 060204 AH725 Wendeplatten - Tungaloy
Take advantage of the proven AH725 PVD-coated carbide and ISO compatibility combined with stable chip control for uninterrupted turning operations. The rhombic 80° geometry and 0.4 mm corner radius deliver consistent edge life and surface quality. Order via Metav Werkzeuge or consult the technical team for application-specific advice. CPMT060204 AH725 Tungaloy indexable insert — ISO indexable turning insert, PVD-coated carbide CPMT060204 AH725 is an ISO-standard indexable insert for turning, designed for reliable external and internal operations with universal, break-resistant performance. AH725 PVD-coated carbide grade ISO 06 size, 80° rhombic geometry Single-sided chipbreaker with cylindrical hole Consistent process security with PVD-coated AH725 grade The insert combines a PVD-coated surface with a robust carbide substrate, delivering improved wear resistance and edge stability in cyclic production. The AH725 grade is formulated as a universal, fracture-resistant option for applications that alternate between steel and rostfreier Stahl, ensuring fewer interruptions due to edge failure. The coating reduces flank and crater wear, which translates into longer tool life and a lower rate of insert changes—benefits that support higher machine utilisation and predictable output in batch or lights-out machining environments. Geometry and ISO compatibility for flexible clamping solutions With its 80° rhombic form and ISO 06 designation, the insert fits a wide range of standard external and internal holders. The configuration and compatibility depend on form, clearance angle, tolerance class, clamping method, size and thickness; the insert’s 11° clearance and 0.4 mm radius contribute to a balanced cutting edge for mixed turning tasks. The 0.4 mm radius helps absorb minor vibration and improves finish on medium- to roughing passes, while the rhombic geometry enables effective approach angles for both longitudinal and profiling cuts. Clear specification of these parameters simplifies holder selection and reduces setup time. Application range and chip control for predictable surface results The single-sided chipbreaker is tuned for general turning and supports controlled chip formation across varying cut depths and feed rates. This promotes stable cutting when machining steel and rostfreier Stahl, particularly in smaller tool assemblies or where process reliability is a priority. The insert’s PVD surface and geometry help maintain an even cutting action, which improves surface integrity and reduces the need for secondary finishing. As a result, productivity rises through fewer interruptions and more consistent part quality. System integration, handling and economical operation The insert is supplied as part of an ISO insert system comprising the indexable plate, the appropriate external holder or boring bar, a shim/clamping kit and replacement screws. The plate thickness of 2.38 mm and its cylindrical hole with a single-sided countersink (40°–60°) ensure secure fixation and straightforward indexing during service. Such mechanical clarity reduces changeover errors and simplifies inventory management. The robust combination of grade and geometry yields a cost-effective solution for shops seeking repeatable performance without frequent regrinding or excessive tooling variety. For reliable, high-process-security turning with the Tungaloy AH725 grade, contact Metav Werkzeuge for tailored technical advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6864919 SKU: 6864919-Tungaloy Manufacturer SKU: TUN6864919 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Material: Carbide Facts Size: 06 (ISO) Geometry angle: 80° Corner radius: 0.4 mm Thickness: 2.38 mm Clearance angle: 11° Special features Coating: AH725 (PVD) Single-sided chipbreaker Plate form: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Application: Turning (external and internal) Suitable for: steel and rostfreier Stahl Compatibility determined by: form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The CPMT060204 AH725 Tungaloy indexable insert is designed for machining steel and rostfreier Stahl, offering a balanced performance for mixed-material production. Which insert geometry and size does this article use? The insert features an 80° rhombic geometry in ISO size 06 with a 0.4 mm corner radius and a thickness of 2.38 mm; see SKU 6864919-Tungaloy for reference. Is the insert coated and what advantages does the coating provide? The CPMT060204 AH725 insert carries a PVD coating (AH725) that increases wear resistance, improves edge stability and contributes to consistent chip formation during turning. Can this insert be used for internal boring operations? Yes, the universal geometry and single-sided chipbreaker make the insert suitable for both external and internal turning when paired with the correct holder. How is the insert fastened and indexed in the holder? The plate has a cylindrical hole with a single-sided countersink (40°–60°) and a 2.38 mm thickness, enabling secure clamping and straightforward indexing in compatible ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of an AH725 PVD‑coated carbide grade and precise ISO geometry for consistent process stability and flexible use across steel and stainless steel; order directly via Metav Werkzeuge or consult the team for matching holders and clamping sets. CPMT 060204 AH725 – Tungaloy indexable turning insert for ISO turning applications A CPMT 060204 AH725 insert engineered to ISO standards, offering a universal, break‑resistant grade optimised for external and internal turning of steel and stainless steel. ISO-standard CPMT 060204 geometry PVD-coated AH725 carbide grade Single-sided chipbreaker for reliable chips Cylindrical hole with 40°–60° countersink Consistent fit and predictable clamping for ISO holders The insert follows an ISO-standard geometry, which ensures reproducible positioning when paired with compatible toolholders and boring bars. Compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness; this means reliable repeatability during index changes and uncomplicated tooling setup. With an 80° approach angle and a 11° relief angle, the geometry supports stable cutting forces and predictable tool engagement, reducing downtime caused by refitting and improving throughput in both short and long series production. Durable PVD-coated grade for mixed-material production The AH725 grade is a PVD-coated carbide specifically developed as a universal, chip-resistant option for processing steel and stainless steel. The coating enhances edge life under varying cutting conditions, while the substrate retains necessary toughness to resist chipping on interrupted cuts. For shops handling mixed batches or frequently changing workpiece alloys, this insert provides a balance between wear resistance and toughness, supporting a higher degree of process security without the need for constant grade swaps. Geometry and features that improve chip control and surface finish Key design details such as the single-sided chipbreaker, rhombic shape, 0.4 mm corner radius and 2.38 mm thickness contribute directly to machinability and finished-part quality. The single-sided chipbreaker assists in controlled fragmentation and evacuation of swarf, particularly on medium-depth turning, while the 0.4 mm corner radius offers a compromise between strength and edge definition for consistent surface finishes. The central cylindrical hole with a 40°–60° countersink ensures secure clamping and precise seating, supporting repeatable tool indexing and minimising runout-related issues. Practical guidance for selection and application Intended for turning operations, the insert is suitable for both external and internal tasks when the correct holder is chosen to match the plate form and tolerance class. Select the chipbreaker and grade based on the workpiece material and the stability of the setup: the AH725 grade suits applications with variable materials and smaller tool sizes where process reliability is a priority. For finishing passes, the smaller corner radius and the insert’s geometry favour improved surface quality; for heavier roughing, consider larger radii or toolpath adjustments to preserve edge life. Discuss Tungaloy AH725 indexable inserts with Metav Werkzeuge to secure optimised cutting strategies and holder recommendations for your turning tasks Technical data Article number: 6856703 SKU: 6856703-Tungaloy Manufacturer SKU: TUN6856703 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: 060204 Insert size: 06 Corner radius: 0.4 mm Thickness: 2.38 mm Relief angle: 11° Approach angle: 80° Special features Grade/coating: AH725, PVD‑coated carbide Plate form: rhombic (CPMT) Hole: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single-sided Typical application: external and internal turning FAQ What holder compatibility is required for this insert? The insert fits ISO‑standard CPMT holders; compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness, so a matching ISO CPMT holder is required. Which materials is the AH725 grade best suited to machine? The AH725 grade is designed as a universal, break‑resistant option for steel and stainless steel, offering balanced wear resistance and toughness for mixed‑material production. Does the insert support internal turning as well as external turning? Yes, the insert’s rhombic CPMT geometry and central hole design make it suitable for both external and internal turning when paired with the appropriate boring bar or holder. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker improves chip formation and evacuation, delivering more consistent swarf control and aiding stable machining in medium cutting depths. What is the article number and manufacturer reference? The article number is 6856703 and the manufacturer SKU is TUN6856703 for the Tungaloy CPMT 060204 AH725 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 grade, ISO-standard 80° rhombic geometry, and a compact 0.4 mm corner radius to secure reliable chip formation and consistent surface finish in turning operations; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CPMT060204 AH725 CPMT turning insert – Tungaloy (ISO-standard, PVD-coated, for turning) The CPMT060204 AH725 is an ISO-standard indexable turning insert designed for external and internal turning, offering a universal, breakage-resistant grade for steel and stainless steels. ISO-standard rhombic insert, 80° geometry PVD-coated AH725 grade for steel and stainless Single-sided chipbreaker for predictable chips 0.4 mm corner radius for versatile finishing Consistent cutting performance for mixed-material production The PVD-coated AH725 grade combines a wear-resistant coating with a robust cemented carbide substrate to deliver process reliability across varying steels and rostfrei materials. The coating reduces flank wear and extends tool life under fluctuating cutting conditions, while the substrate preserves edge integrity during interrupted cuts. This balance is particularly beneficial where small tools and variable workpiece types are used, since controlled wear behaviour reduces downtime and maintains dimensional stability in serial and job-shop production. Secure mounting and simple integration into ISO tool systems Designed as an ISO-defined component, the insert’s 80° rhombic form, 11° clearance, and standard tolerance allow straightforward integration into matching toolholders. The insert is supplied with a cylindrical hole and one-sided countersink (40°–60°) to ensure reproducible clamping and correct seating against the insert pocket. Clear specification of holder geometry, tolerance class and fastener type is essential for optimal performance; proper matching guarantees repeatable cutting conditions and simplifies inventory management by standardising spare parts. Predictable chip control and improved surface quality The single-sided chipbreaker geometry promotes controlled chip formation for both external and internal turning, reducing the risk of tangling and improving coolant access. With a 0.4 mm corner radius, the geometry supports light finishing cuts and aids in achieving consistent surface roughness without compromising edge strength. Stable chip evacuation and a defined cutting edge contribute to safer, more efficient machining cycles and help to maintain component tolerances across medium- to high-volume runs. Practical application guidance and system composition Suitable for a wide range of turning tasks, the insert is part of a system comprising the ISO insert, a compatible external holder or boring bar, a shim/clamp set and spare screws. Size 06 and plate thickness 2.38 mm make the insert compatible with compact tooling setups where rigidity and clearance are priorities. Selection of feed and speed should consider workpiece material and machine capability; the AH725 grade is recommended where high process stability and broad material coverage are required, particularly in mixed-production environments. Contact Metav Werkzeuge for tailored cutting recommendations and specify the Tungaloy AH725 grade to benefit from reliable chip control and extended tool life Technical data Article number: 6864987 Manufacturer SKU: TUN6864987 Label: CPMT060204 AH725 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Description: CPMT060204 AH725 Tungaloy indexable insert for turning Core measurements Corner radius: 0.4 mm Insert size: 06 Plate thickness: 2.38 mm Main angle: 80° Clearance angle: 11° Design & features Grade: AH725 (PVD-coated cemented carbide) Shape: rhombic, 80° geometry Chipbreaker: single-sided Hole: with cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning System components: insert, holder/boring bar, shim/clamp set, spare screws FAQ What materials is this insert suitable for? The CPMT060204 AH725 insert is designed for machining steel and stainless steels, utilising the AH725 grade to offer broad material coverage and stable chip formation. How does the chipbreaker affect machining? The single-sided chipbreaker on the Tungaloy CPMT060204 promotes predictable chip control, improving evacuation and surface finish in both external and internal turning operations. Which holders fit this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening style, size and thickness; the ISO-standard geometry of the CPMT060204 supports a wide range of dedicated external holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH8005 Wendeplatten - Tungaloy
High wear resistance and a PVD-coated carbide grade deliver consistent cutting performance for demanding jobs; the rhombic geometry with an 0.4 mm corner radius and 11° clearance angle improves stability and surface finish. Order the CPMT 060204 AH8005 indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed CPMT 060204 AH8005 – CPMT indexable turning insert for turning (Tungaloy) The CPMT 060204 AH8005 is an ISO-form indexable turning insert designed for external and internal turning of hard and heat-resistant alloys, optimised for stable machining in robust setups PVD-coated wear-resistant carbide ISO CPMT 060204 rhombic insert form 11° clearance angle for stable cutting Cylindrical hole plus 40°–60° countersink Increased process reliability through a wear-resistant grade The combination of a PVD-coated surface and carbide substrate in the AH8005 grade is geared towards prolonged tool life when machining heat-resistant alloys and other hard materials. This indexable insert concentrates wear on the coating rather than the base metal, reducing the frequency of index changes and lowering downtime. In production environments where reproducible results matter, the wear behaviour translates into more consistent cycle times and fewer interrupted setups, which supports higher overall productivity and predictable part quality. Geometry engineered for stability and improved surface finish The rhombic geometry with an included angle of 80°, an 0.4 mm corner radius and a 11° clearance angle offers a balance between cutting edge strength and accessibility. The modest corner radius helps maintain edge robustness on interrupted cuts, while the clearance angle reduces rubbing and heat generation at the flank. A plate thickness of 2.38 mm adds mechanical support to the cutting edge, enabling secure clamping and better vibration damping. Together, these features contribute to a finer surface finish and reduced risk of edge chipping in stable machining conditions. Compatibility and mounting considerations for straightforward integration Designed as part of an ISO indexable plate system, the insert’s fit depends on form, clearance, tolerance class, fastening, size and thickness. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°), allowing secure fixation in compatible holders and boring bars. Selecting the appropriate seat and clamping system ensures correct axial and radial positioning, which is essential for repeatable geometry and effective chip evacuation. For one-sided chip control, the integrated single-sided chipbreaker supports predictable chip flow under consistent cutting conditions. Economic and application rationale for choosing AH8005 The AH8005 composition is optimised for abrasive and heat-prone materials; it emphasises stable cutting behaviour over aggressive material removal in unstable setups. In practice, this means fewer index changes and a lower risk of premature edge failure when machining demanding alloys, providing a favourable balance between tool cost and component throughput. For workshops focusing on repeatability and surface quality in external and internal turning operations, this insert represents a practical choice that supports process stability and efficient production planning. Contact Metav Werkzeuge for tailored recommendations on using the Tungaloy CPMT 060204 AH8005 in specific materials and to arrange batch supply or technical consultation Technical Data Manufacturer article number: 6775780 SKU: 6775780-Tungaloy Manufacturer SKU: TUN6775780 Designation: CPMT 060204 Facts Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Plate thickness: 2.38 mm Plate size: 06 Special features Material: PVD-coated carbide (AH8005 grade) Geometry: rhombic CPMT form Chipbreaker: single-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Application: turning (external and internal) System: ISO indexable turning inserts FAQ Which materials is this insert suitable for? The CPMT 060204 AH8005 insert is specified for heat-resistant alloys and other hard materials; the AH8005 grade prioritises wear resistance for stable machining. Is the insert compatible with standard ISO holders? Compatibility is ensured when the holder matches the insert form, clearance, tolerance class, fastening and thickness; the CPMT 060204 uses a cylindrical hole with a 40°–60° countersink for secure clamping. What advantages does the 0.4 mm corner radius provide? A 0.4 mm corner radius increases edge strength and reduces the likelihood of chipping on interrupted cuts while maintaining acceptable surface finish on general turning tasks. How does the PVD coating affect performance? The PVD-coated layer on the carbide substrate improves resistance to abrasive wear and heat, extending index life and supporting consistent cutting results with the AH8005 grade. For which turning operations is this insert recommended? The insert is intended for both external and internal turning where process stability and wear resistance are priorities; its geometry and chipbreaker suit steady machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide and a precise 80° rhombic geometry for consistent, economical turning of heat-resistant alloys; the balanced AH8015 grade provides wear resistance with edge stability. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CPMT 060204 AH8015 Turning indexable insert — Tungaloy (PVD-coated, 80° rhombic) The CPMT060204 AH8015 indexable turning insert is an ISO-standardised rhombic insert designed for general turning of heat-resistant alloys, offering a balance of wear resistance and edge stability for both external and internal turning applications. PVD-coated cemented carbide AH8015 Rhombic 80° geometry 0.4 mm corner radius Single-sided chipbreaker Cylindrical hole with countersink Consistent cutting performance for heat-resistant alloys The combination of a PVD-coated surface and cemented carbide substrate in the AH8015 grade gives a dependable balance between wear resistance and edge stability. This makes the insert particularly suitable for machining heat-resistant alloys where thermal loads and abrasive wear are common. The PVD coating reduces adhesion and improves high-temperature performance, extending tool life and reducing downtime. By selecting an insert with a balanced grade, tool change frequency is minimised and process economy is improved without sacrificing surface quality. Geometry engineered for repeatable precision and surface finish The 80° rhombic geometry and a 0.4 mm corner radius ensure robust cutting edges while enabling fine finishing passes where required. A 11° clearance angle reduces rubbing and lowers cutting forces, contributing to predictable tool behaviour and better chip evacuation. The insert thickness of 2.38 mm supports stability in heavier cuts and resists deformation under load. Together, these geometric parameters deliver stable tool performance and consistent surface finishes, which is essential for serial production and precision components. Secure clamping and system compatibility for reliable production As an ISO-standard insert (ISO 060204), the plate integrates into common holder systems provided the form, clearance angle, tolerance class, fastening style, size and thickness match. The cylindrical hole with single-side countersink (40°–60°) allows secure clamping and straightforward orientation during indexing, while the single-sided chipbreaker controls chip formation for a wide range of feeds and depths. When paired with a suitable external holder or boring bar, this configuration reduces vibration and supports repeatable results across batches. Contact Metav Werkzeuge today for tailored selection and availability of Tungaloy CPMT060204 AH8015 indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and fast delivery Technical Data Article number: 6775781 Manufacturer SKU: TUN6775781 SKU: 6775781-Tungaloy Model series: ISO turning indexable inserts Designation: CPMT060204 Core specifications Corner radius: 0.4 mm Insert thickness: 2.38 mm Cutting angle: 80° Clearance angle: 11° ISO code: 060204 Size: 06 Features & compatibility Coating: PVD, grade AH8015 Material: cemented carbide Shape: rhombic Chipbreaker: single-sided Hole: cylindrical hole with single-side countersink (40°–60°) Application: Turning (external and internal) System: ISO-standard insert, compatible with matching holders FAQ What materials is this insert best suited for? The CPMT060204 AH8015 insert is optimised for heat-resistant alloys; the AH8015 PVD-coated grade balances wear resistance and edge stability for general machining of such materials. What does the ISO code 060204 indicate? ISO 060204 defines the insert size and geometry class (shape 06, 02 nose radius, 04 thickness/format conventions); the CPMT designation identifies the rhombic form and geometry family for holder compatibility. How does the single-sided chipbreaker affect performance? A single-sided chipbreaker on this insert controls chip shape and evacuation, improving surface finish and reducing risk of chip entanglement when machining a variety of materials. Will the insert fit existing holders? Compatibility is determined by form, clearance angle, tolerance class, fastening and thickness; CPMT060204 fits ISO holders designed for rhombic 80° inserts when those parameters match. What clamping style does the insert use? The insert uses a cylindrical hole with a single-side countersink (40°–60°) to enable secure clamping and consistent orientation during indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8015 grade and the 0.4 mm corner radius for stable cutting in heat-resistant alloys; the balanced wear resistance and edge stability support consistent productivity. Order the insert directly via Metav Werkzeuge or consult our technical advisors for integration advice. CPMT060204 AH8015 turning insert (ISO 060204) for Drehen by Tungaloy CPMT060204 AH8015 is an ISO‑standard indexable insert for general turning applications, designed for dependable performance when machining heat‑resistant alloys. PVD-coated cemented carbide AH8015 80° geometry for robust cutting forces Rhombic shape with 0.4 mm corner radius Cylindrical hole with single-side countersink Longer tool life for demanding alloys The PVD-coated cemented carbide grade AH8015 provides a deliberate balance between wear resistance and cutting-edge stability, making it especially suitable for machining heat‑resistant alloys. This results in fewer tool changes and a steadier surface finish over longer runs. The coating enhances resistance to high temperatures and abrasive wear, while the substrate maintains the mechanical strength required for interrupted cuts and variable feeds. The combined effect is predictable tool life and more consistent production planning. Controlled chip formation reduces downtime A single‑sided chipbreaker geometry is matched to the insert grade to support reliable chip control during turning. Stable chip formation reduces the risk of entanglement and improves swarf handling in automated or semi‑automated turning centres. With predictable chip flow, the system requires less manual intervention, lowering the likelihood of tool‑related stoppages and helping to keep cycle times consistent. Secure mounting and ISO compatibility for easy integration The insert’s ISO designation and standard dimensions ensure compatibility with a wide range of holders; form, relief, tolerance class, fastening method, size and thickness determine fit. The insert features an 80° cutting angle, an 11° relief angle and a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping and reproducible seating. These characteristics simplify tool change procedures and support repeatable clamping forces, which contributes to dimensional consistency in serial production. Geometry tuned for precision turning operations With a rhombic shape and a 0.4 mm corner radius, the insert provides a compromise between small‑radius finishing and robust edge strength for light to medium turning passes. The 2.38 mm thickness and size 06 give a solid bearing surface in the seat and help resist vibration in less rigid setups. When paired with an appropriate holder and machining parameters, the configuration supports reliable surface quality and dimensional accuracy on outer and inner turning tasks. For reliable integration of the Tungaloy AH8015 grade and assistance with holder selection, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on the optimal setup for production demands. Technical Data Article number: 6951195 Manufacturer SKU: TUN6951195 SKU: 6951195-Tungaloy Model series: ISO turning indexable inserts Designation: CPMT060204 AH8015 Material: cemented carbide Coating: PVD-coated Facts Corner radius: 0.4 mm Relief angle: 11° Insert thickness: 2.38 mm Insert size: 06 Cutting angle: 80° Special features Shape: rhombic Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning FAQ What materials is this insert designed to machine? The CPMT060204 AH8015 insert is specified for machining heat‑resistant alloys and general turning tasks, its PVD coating and AH8015 grade balancing wear resistance and edge stability for those materials. Which holder characteristics are required for correct compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the CPMT060204 format follows ISO standards to ease selection of an appropriate turning holder. How does the chipbreaker influence machining performance? The single‑sided chipbreaker on this insert improves chip control and evacuation during turning, reducing the risk of swarf interference and helping to maintain consistent cycle times. Is the insert suitable for finishing passes with tight tolerances? With a 0.4 mm corner radius and rhombic geometry, the insert supports precise finishing where a small radius is required while retaining edge robustness for reliable finishing results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AH8015 Wendeplatten - Tungaloy
Taking advantage of a PVD‑coated carbide AH8015 grade and a 0.4 mm corner radius, this insert delivers a reliable balance between wear resistance and edge stability for machining heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for suitability and cutting data. CPMT 060204 AH8015 – ISO rhombic turning insert by Tungaloy for turning The CPMT060204 AH8015 is an ISO‑standard rhombic indexable insert engineered for external and internal turning of heat‑resistant alloys, offering a PVD‑coated carbide grade tuned for durability and edge retention. PVD‑coated carbide for balanced wear 0.4 mm corner radius for stable cutting ISO rhombic 06 format with 11° clearance Cylindrical hole with single‑sided countersink Consistent cutting performance for heat‑resistant alloys The PVD‑coated carbide AH8015 brings a targeted mix of wear resistance and edge stability, which is especially beneficial when tackling alloys that demand thermal resilience. The coating reduces adhesion and softening at elevated temperatures, prolonging usable edge life and lowering the frequency of index changes. As a result, machining cycles become more predictable and set‑ups require less intervention, supporting steady throughput in serial and batch turning operations. Secure clamping and geometrical reliability Designed as an ISO‑standard rhombic insert, the geometrical parameters ensure compatibility with a wide range of ISO holders. The cylindrical hole with single‑sided countersink (40°–60°) provides a secure and repeatable clamping interface, while the 11° relief angle contributes to consistent chip flow and surface finish. These features reduce the risk of improper seating and improve repeatability across insert changes, which supports process stability on the shop floor. Controlled cutting geometry for predictable results The 0.4 mm corner radius offers a compromise between strength at the cutting edge and the ability to produce fine contouring or light finishing passes. For most general turning tasks on tougher alloys, this radius reduces micro‑chipping and improves edge life compared with sharper corners, while still allowing satisfactory surface integrity. Selecting the right chipbreaker and feed speed in combination with this geometry results in lower vibrations and improved tool life. Practical advantages for workshop productivity Using an indexable system built around an ISO plate simplifies inventory and reduces downtime caused by tool regrinds or reconditioning. The combination of PVD coating, a robust substrate and the single‑sided chipbreaker leads to longer intervals between index changes and more consistent component quality. Suppliers can specify the CPMT060204 AH8015 insert where a balance of economy and performance is required, particularly for machining demanding, heat‑resistant materials. For machining heat‑resistant alloys with proven longevity and predictable performance, contact Metav Werkzeuge for the Tungaloy CPMT060204 AH8015 insert and tailored cutting recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951168 Manufacturer SKU: TUN6951168 SKU: 6951168-Tungaloy Name: CPMT060204 AH8015 Tungaloy insert Core figures Corner radius: 0.4 mm Relief angle: 11° Included angle: 80° Thickness: 2.38 mm Size: 06 Design and features PVD‑coated carbide (AH8015) Rhombic plate form Cylindrical hole + single‑sided countersink (40°–60°) Single‑sided chipbreaker ISO‑standard turning insert Intended application: turning FAQ Which materials are best suited to this insert? The CPMT060204 AH8015 insert is optimised for heat‑resistant alloys; the AH8015 grade balances wear resistance and edge strength for those materials. How is the insert secured in the holder? Clamping is via the cylindrical hole with a single‑sided countersink; this geometry gives repeatable seating and secure fixation for ISO‑compatible holders. What benefits does the PVD coating provide? The PVD‑coating on the AH8015 grade reduces adhesion and thermal softening, extending usable edge life during continuous turning of high‑temperature alloys. Can this plate be used for finishing passes? Yes; the 0.4 mm corner radius and single‑sided chipbreaker enable controlled finishing cuts while maintaining improved edge stability versus finer radii. Is the CPMT060204 compatible with standard ISO toolholders? Yes; the plate follows ISO dimensions and is compatible when form, clearance angle, tolerance class and thickness match the holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 AT9530 Wendeplatten - Tungaloy
Benefit from the combination of a precision ISO geometry and the AT9530 coated cermet grade for consistently high surface quality and controlled wear; the rhombic CPMT 060204 form with a 0.4 mm corner radius and 80° cutting edge offers versatility for fine and light turning operations. Order the insert directly via Metav Werkzeuge or consult the technical team for application support. CPMT 060204 AT9530 — CPMT Turning Insert (Tungaloy) A CPMT 060204 AT9530 turning insert engineered for fine and light finishing of steel, delivering improved surface quality through a coated cermet grade and ISO‑standard geometry. ISO CPMT 060204 format, rhombic 06 Coated cermet grade AT9530 for fine finishing 0.4 mm corner radius and 80° cutting edge Cylindrical hole with 40°–60° single-side countersink Predictable surface quality and uniform wear The combination of the AT9530 coated cermet and the ISO CPMT geometry focuses on delivering a stable cutting performance for finishing passes. The coating promotes uniform wear, reducing the risk of premature flank deterioration and supporting consistent workpiece finish across batches. For workshop operations where surface integrity matters, this grade is optimised for light and finishing cuts on steel, helping to extend usable life between index changes and maintain a predictable process window. Geometry that balances accuracy and versatility The rhombic 06 format and the 80° cutting edge provide a versatile contact angle for both external and internal turning, while the 0.4 mm corner radius contributes to a fine surface appearance without excessive cutting forces. The 11° clearance angle assists in preventing rubbing on the flank, preserving dimensional accuracy. For less experienced users: a larger corner radius smooths the surface but raises cutting forces, whereas the small 0.4 mm radius used here keeps forces low while improving finish—an ideal compromise for precision finishing. Fast and reliable clamping plus holder compatibility ISO standardisation of the insert form ensures straightforward compatibility with a wide range of CPMT holders and boring bars; mounting is secured by the central hole and the specified cylindrical hole with single‑side countersink (40°–60°), which stabilises seating and torque distribution. The insert is part of a system that typically includes the holder, support shim and clamping set; selecting the correct holder geometry and tolerance class is essential to exploit the insert’s potential and maintain repeatability in production. Application focus and process benefits Designed primarily for turning of steel, the single‑sided chipbreaker and the AT9530 grade are tuned for finishing and light machining, providing an attractive mix of surface quality and reliable edge life. In practice this translates into fewer reworks, improved first-pass yield and more consistent batch results—advantages that support productivity and lower overall machining costs. The insert’s ISO conformity also simplifies tool inventory and replacement procedures in mixed‑type machine shops. For tailored advice on integrating Tungaloy inserts into production or to request a supply via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and batch availability Technical Data Article number: 6773731-Tungaloy Manufacturer article number: 6773731 SKU: TUN6773731 Model series: ISO turning inserts Facts Insert designation: CPMT060204 ISO code: 060204 Size: 06 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance (relief) angle: 11° Cutting edge angle: 80° Special features Grade/coating: AT9530 (coated cermet) Chipbreaker: single‑sided Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Plate shape: rhombic Typical application: Turning (fine and light machining of steel) FAQ What machining tasks is this insert best suited for? The CPMT 060204 AT9530 insert is intended for fine and light turning of steel, where surface finish and controlled wear are priorities. Which holder types are compatible with the CPMT 060204 form? Compatibility depends on holder form, relief angle, tolerance class and screw/clamping arrangement; the ISO CPMT geometry ensures broad compatibility with standard CPMT turning holders. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius offers a balance between improved surface finish and moderate cutting forces, making the insert suitable for finishing passes without excessive loads. Is the AT9530 grade suitable for roughing? This grade is optimised for finishing and light machining of steel; for heavy roughing a different chipbreaker and grade would be more appropriate. What securing mechanism is specified for this insert? The insert uses a central cylindrical hole with a single‑side countersink (40°–60°) for stable seating and clamping in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 GH730 Wendeplatten - Tungaloy
Taking advantage of the GH730 cutting grade and ISO compatibility delivers a cost-effective mix of wear resistance and reliable edge stability for consistent turning results; order the CPMT 060204 inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CPMT 060204 GH730 Tungaloy turning insert — 0.4 mm radius, centre hole The CPMT060204 GH730 is an ISO-compliant turning insert designed for external and internal turning, combining a rhombic form with a single-sided chipbreaker for controlled material removal ISO 060204 rhombic insert for turning GH730 grade for wear resistance and toughness Central hole, cylindrical with 40°–60° counterbore Extend tool life and cut costs with a wear‑resistant grade The cemented carbide substrate paired with the GH730 grade provides a balance of wear resistance and edge stability, aimed at reducing the frequency of index changes and unplanned downtime. For production environments that prioritise consistent component dimensions and surface quality, this combination means fewer tool changes and lower overall tooling consumption. The modest 0.4 mm corner radius supports reliable cutting edge strength for light to moderate finishing passes, preserving insert life while maintaining dimensional accuracy. Secure clamp seating and ISO-based holder compatibility Built to ISO geometries, the rhombic plate form and the central cylindrical hole with a 40°–60° counterbore ensure predictable seating and repeatable clamping. Compatibility is determined by plate form, clearance angle, tolerance class, fixation method, size and thickness, so the standardised 060204 designation simplifies holder selection for production tooling systems. The 11° clearance angle influences the cutting geometry, helping to control cutting forces and reduce built-up edge when paired with an appropriate holder and backing plate. Consistent chip control and application guidance for turning The single-sided chipbreaker geometry supports controlled chip formation during both external and internal turning; select the chipbreaker and grade according to workpiece material, machining strategy and machine–workpiece stability. The insert performs well in general turning tasks where stable cutting conditions are achievable. For the best results, integrate the ISO plate into a complete system comprising the correct external holder or boring bar, a backing shim or clamp set and the specified fixing screw; this system approach maintains cutting performance and repeatability. For application advice or to secure original Tungaloy CPMT 060204 GH730 turning inserts, contact Metav Werkzeuge for tailored recommendations and prompt supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6820974 Manufacturer SKU: TUN6820974 SKU: 6820974-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CPMT060204 Grade: GH730 Material: cemented carbide Facts Plate size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included hole style: cylindrical hole with one-sided counterbore 40°–60° Nominal angle: 80° Special features Rhombic plate form Single-sided chipbreaker ISO 060204 geometry With central hole Intended for external and internal turning Tungaloy grade GH730 FAQ What holders are compatible with this ISO insert? Compatibility depends on the holder matching the ISO 060204 form; the CPMT 060204 GH730 fits holders and boring bars designed for rhombic ISO plates with the corresponding fixation, size and thickness. Which machining tasks suit this insert best? This indexable plate is intended for external and internal turning where a moderate corner radius and single-sided chipbreaker provide stable cutting and good surface results. How does the GH730 grade affect performance? The GH730 cutting grade enhances wear resistance and edge stability in the CPMT 060204 insert, extending tool life and supporting consistent production performance. Is the insert supplied with fastening screws or backing plates? The CPMT 060204 GH730 is an insert; a complete tool system requires a matching external holder or boring bar, backing shim or clamp set and replacement screws as appropriate for the machine setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com