CPGT 080204 TH10 Wendeplatten - Tungaloy
Optimise turning operations by combining a sharp, uncoated carbide cutting edge with ISO conformity for consistent seating and reliable chip control. The rhombic geometry and secure clamping features support efficient changeover and stable machining — order the CPGT 080204 TH10 directly via Metav Werkzeuge or ask our consultants if needed. CPGT 080204 TH10 ISO turning insert for turning — Tungaloy CPGT 080204 TH10 is a rhombic ISO-standard turning insert designed for external and internal turning, offering an uncoated carbide edge for low cutting forces and clean surface finishes. Rhombic ISO shape, 80° included angle Uncoated carbide TH10 for low cutting forces Single-sided chipbreaker for predictable chips Cylindrical fixing hole with countersink Predictable performance through ISO conformity and fit The ISO-series design ensures reproducible seating and interchangeability across compatible holders: compatibility depends on form, relief angle, tolerance class, fastening, size and thickness, which together allow consistent clamping and machining outcomes. With an 80° included angle and an 11° relief, the geometry promotes stable engagement during both light finishing and general turning operations. This controlled interface reduces unexpected tool movement and contributes to predictable part quality over repeated insert changes. Sharp universal grade for non‑ferrous work and low cutting forces The grade TH10 is an uncoated carbide chosen for applications that benefit from a sharp edge and low cutting resistance, notably non‑ferrous materials and situations where surface integrity is critical. The combination of a sharp cutting edge and the single‑sided chipbreaker helps to produce clean surfaces while lowering the tendency for built‑up edge. For workshops focused on aluminium, copper alloys and similar materials, this specification supports higher material removal rates with improved finish compared with dulled or heavily coated grades. Geometry and fixation that reduce setup time and enhance stability The rhombic plate with a 0.4 mm corner radius and 2.38 mm thickness is designed for secure clamping and versatile application. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) to match standard clamping hardware, improving repeatability at each tool change. These design details - from the rhombic form to the precise hole style - assist in uniform chip formation and minimise vibration, thereby extending effective tool life and reducing secondary operations. System advice: choosing chipformers and holders for best results As part of a complete system, the insert works in concert with a matching external holder or boring bar, plus the required underlay/shim, clamp set and replacement screws. Selecting the appropriate chipbreaker and grade in line with workpiece material and machine-tool rigidity is essential for optimised productivity. For less rigid setups, favour lighter cut depths and a chipformer that promotes breakage; for stable, heavy cuts, the same insert can offer extended life when paired with a robust clamping system. Contact Metav Werkzeuge for application recommendations and to order genuine Tungaloy CPGT 080204 TH10 turning inserts; technical queries by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6802393 Manufacturer SKU: TUN6802393 SKU: 6802393-Tungaloy Model series: ISO-Drehwendeschneidplatten Product label: CPGT080204 TH10 Tungaloy-Wendeplatte Facts Included angle: 80° Relief angle: 11° Thickness: 2.38 mm Corner radius: 0.4 mm Size: 08 Special features Material: carbide Grade: TH10 (uncoated carbide) Plate form: rhombic Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning System components: ISO insert, matching external holder or boring bar, underlay/shim, clamp set and replacement screws Compatibility determined by form, relief, tolerance class, fastening, size and thickness FAQ What materials is the CPGT 080204 TH10 best suited for? The CPGT 080204 TH10 insert is optimised for non‑ferrous materials and applications where a sharp, uncoated carbide edge promotes low cutting forces and a clean surface finish. How does the insert clamp into existing holders? Clamping depends on the ISO geometry and the insert’s cylindrical hole with countersink; compatibility is achieved when the holder matches the insert’s form, relief angle, tolerance class, fastening method, size and thickness. What chip control can be expected with this insert? Thanks to the single‑sided chipbreaker and rhombic geometry, the insert produces predictable chipforms that support continuous machining and reduce interruptions for chip handling. Is the CPGT 080204 TH10 suitable for both external and internal turning? Yes, the CPGT 080204 TH10 is designed for external and internal turning, offering consistent performance when paired with the correct external holder or boring bar. Which SKU should be referenced when ordering? Reference SKU 6802393-Tungaloy or manufacturer SKU TUN6802393 when enquiring to ensure the correct ISO insert and grade are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPGT 090302 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 cermet finishing grade, the precise 0.2 mm corner radius, and ISO conformity for reliable, repeatable turning results. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific setup and holder compatibility. CPGT090302 NS9530 Turning Insert — rhombic 09, finishing grade by Tungaloy A CPGT090302 NS9530 uncoated cermet insert engineered for precision finishing in turning operations, optimised for steels and continuous cuts. Precision NS9530 cermet for finishing Rhombic 09 form, 11° clearance angle 0.2 mm corner radius for superior surface finish Compatible with ISO turning holders, central hole High‑precision finishing performance for steel turning The NS9530 grade is an uncoated cermet developed as a finishing sort for steel, offering a sharp cutting edge and low cutting forces that translate into very good surface finish and reduced need for secondary machining. As a finishing insert it performs best under continuous cutting conditions and with small depths of cut, where its composition and edge geometry reduce vibration and support consistent part quality. The combination of material and geometry aims to increase process efficiency by favouring stable cutting and minimising rework. Clear guidance on holder compatibility and mechanical fit Compatibility with a toolholder depends on insert form, clearance angle, tolerance class, fastening method, size and thickness. This insert is a rhombic 09 with an 11° clearance and an included angle of 80°, a 0.2 mm corner radius and 3.18 mm thickness, and features a central hole with a cylindrical bore plus a single‑side countersink (40°–60°). These measurable parameters determine clamp choice and seating; matching holder geometry and clamp set ensures correct seat, repeatable clamping and optimal cutting stability. Practical selection and benefits in production The single‑sided chipbreaker and uncoated cermet composition make this insert particularly suited to operators focused on finish quality and minimal cutting forces rather than aggressive material removal. Selecting the appropriate chipbreaker and ensuring a rigid setup yields consistent surface finish and steady process results in turning tasks. The insert integrates into a system consisting of the ISO insert, a matching external holder or boring bar, shim/washer and clamp set plus standard replacement screws, enabling straightforward replacement and reduced machine downtime. Contact Metav Werkzeuge for application advice or to request the CPGT090302 NS9530 Tungaloy turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997920 SKU: 6997920-Tungaloy Manufacturer SKU: TUN6997920 Model series: ISO turning inserts Designation: CPGT090302 NS9530 Facts Size: 09 Thickness: 3.18 mm Clearance angle: 11° Corner radius: 0.2 mm Included angle: 80° Countersink angle: 40°–60° Special features Material: cemented carbide body Cutting material: uncoated cermet NS9530 Plate form: rhombic Chipbreaker: one-sided Hole style: cylindrical hole + single-sided countersink Application: turning (external and internal), finishing operations FAQ Which materials is this insert best suited for? The CPGT090302 NS9530 is a finishing grade tailored for steel; its uncoated cermet composition and sharp edge favour continuous cuts and small depths of cut on steel workpieces. How can compatibility with an existing holder be checked? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; match the holder to the rhombic 09 form, 3.18 mm thickness and the central hole/countersink style of the insert for correct seating. Is the NS9530 cutting material coated? The NS9530 grade is uncoated cermet, offering a sharp edge and low cutting forces to improve surface finish during finishing cuts. What operations are recommended with this insert? Designed for finishing in turning, the insert is suitable for both external and internal turning where a high surface quality and low cutting forces are required; pair with a rigid setup and the appropriate chipbreaker for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPGT 090302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated cermet cutting edge, consistent ISO compatibility and precise chip control for reliable finishing performance in turning operations. Order the insert directly via Metav Werkzeuge or consult our team for matching holders and clamping sets. CPGT 090302 NS9530 – Turning insert for finishing operations, Tungaloy The CPGT090302 NS9530 is an ISO‑form rhombic turning insert designed for finishing on steel, delivering low cutting forces and superior surface quality in continuous cuts. Finishing uncoated cermet grade NS9530 Sharp cutting edge for low cutting forces ISO rhombic insert 09, 3.18 mm thick Single-sided chipbreaker for continuous cuts Consistent finishing quality through a sharp uncoated cermet grade The uncoated cermet grade NS9530 is formulated for finishing cuts on steel where a sharp cutting edge and low cutting forces are decisive. The material composition promotes a fine edge and reduced built‑up edge, which together produce a consistently high surface finish even with small depths of cut. For operations that demand repeatable part quality, this finishing grade reduces the need for secondary processes and supports steady throughput with fewer interruptions. Precise fit and geometry for secure clamping and stable cutting ISO compliance ensures the insert fits holders that match the rhombic form and the defined tolerances; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The CPGT090302 features an rhombic 09 form with a corner radius of 0.2 mm, a clearance angle of 11° and a plate thickness of 3.18 mm, ensuring predictable engagement and stiffness in the cut. The insert’s hole—cylindrical with a one‑sided countersink—permits reliable clamping, while the single‑sided chipbreaker promotes controlled chip formation during continuous cutting, improving process stability and tool life. Choosing the correct holder and clamping set accordingly minimises vibration and maximises dimensional accuracy. Practical application guidance and system considerations for turning This ISO turning insert is intended for external and internal turning in finishing applications on steel where small feed and depth parameters are used. The combination of a sharp cermet edge and single‑sided chip control makes it especially suited to continuous cuts and precision finishing passes. The typical system comprises the ISO insert, a compatible external holder or boring bar, a shim/clamping set and replacement screws; ensuring all components meet the specified form and tolerance class is essential for safe, repeatable results. For users new to cermet grades, note that these inserts favour stable cutting conditions and benefit from optimised coolant strategies and consistent feed to maintain surface integrity. For precision finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for advice on holder compatibility and supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and availability. Technical Data Article number: 6997919 SKU: 6997919-Tungaloy Manufacturer SKU: TUN6997919 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 0.2 mm Included angle: 80° Clearance angle: 11° Plate thickness: 3.18 mm Insert size: 09 Special features Uncoated cermet grade NS9530 Rhombic insert form (CPGT) Single-sided chipbreaker Hole: cylindrical + one-sided countersink (40°–60°) ISO‑standard turning insert Application: turning, finishing for steel System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert designed for? The insert is supplied in the uncoated NS9530 cermet grade and is intended primarily for finishing operations on steel. Which holder features are required for secure use? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the insert’s cylindrical hole with countersink requires a matching clamp and screw arrangement. Is this insert suitable for internal and external turning? Yes, the ISO rhombic form and chip control make it suitable for both external and internal finishing passes under stable cutting conditions. How does the single-sided chipbreaker affect machining? The single‑sided chipbreaker is designed to control chip formation during continuous cuts, reducing the risk of entanglement and improving process reliability. Can this insert be used for interrupted cuts? The NS9530 finishing grade is optimised for continuous cutting and small depths of cut; interrupted cuts may reduce tool life and surface quality compared with stable continuous conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPGT 090302 TH10 Wendeplatten - Tungaloy
Benefit from a reliable combination of a sharp, uncoated TH10 carbide grade and a precise 0.2 mm nose radius for low cutting forces and clean surface finishes; the ISO rhombic geometry and secure locating hole ensure stable clamping and repeatable results. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CPGT 090302 TH10 Tungaloy turning insert — rhombic 80°, 0.2 mm radius A CPGT090302 TH10 ISO rhombic turning insert designed for external and internal turning, delivering low cutting forces and high-quality finishes in non-ferrous and delicate machining tasks. ISO CPGT090302 rhombic 80° insert Uncoated TH10 carbide for low cutting forces 0.2 mm nose radius for fine surface finish Single-sided chipbreaker with locating hole Lower cutting forces and cleaner finishes for non-ferrous work The combination of a sharp, uncoated carbide cutting edge and the TH10 grade is engineered to keep cutting forces low, which is particularly beneficial when machining softer or ductile materials. A reduced force means less deflection in light setups and improved dimensional stability on small-diameter shafts. The 0.2 mm nose radius contributes to a high-quality surface without aggressive material removal, so finishes are cleaner and secondary grinding or polishing steps can be minimised. For shops focusing on throughput and repeatability, this results in fewer rejects and a steadier production flow. Secure clamping and ISO compatibility to reduce setup time Built to the ISO specification for turning inserts, this rhombic plate features an 80° geometry, 11° relief, and a central locating feature with a cylindrical hole and single-sided countersink (40°–60°). The standardised form factor ensures compatibility with a wide range of external holders and boring bars when the holder selection matches form, clearance angle, tolerance class, fixation method, size and thickness. Secure clamping via the locating hole reduces vibration and makes index changes predictable, which shortens downtime and supports consistent tool life. The 3.18 mm thickness and stable geometry also help maintain edge strength in interrupted cuts. Practical guidance for choosing the right chipbreaker and applications This insert is supplied with a single-sided chipbreaker, which is best matched to the machining stability, workpiece material and desired chip form. Where low forces and neat chips are priorities—such as in aluminium alloys, brass, and certain plastics—the uncoated grade performs well and avoids built-up edge that can deteriorate finishes. For operations involving heavier interrupted cuts or harder alloys, select a chipbreaker and holder with increased support and consider a coated grade if higher thermal and abrasive resistance is required. The insert is therefore well suited to precision turning tasks where surface quality and minimal cutting force are the primary concerns. For application advice or to request delivery of genuine Tungaloy CPGT090302 TH10 turning inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will recommend the optimal chipbreaker and holder combination for the task. Technical data Article number: 6802395 Manufacturer SKU: TUN6802395 Internal SKU: 6802395-Tungaloy Model series: ISO turning inserts Brand: Tungaloy Core specifications Geometry: rhombic, 80° Insert size: 09 Thickness: 3.18 mm Relief angle: 11° Nose radius: 0.2 mm Mounting: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Features & materials Carbide material (cemented carbide) Grade: TH10 (uncoated) Chipbreaker: single-sided Typical application: external and internal turning System components: ISO insert, suitable external holder or boring bar, shim/ clamp set and replacement screws FAQ What materials is this insert intended for? The CPGT090302 TH10 insert from Tungaloy is optimised for non-ferrous materials and applications where an uncoated, sharp edge supports low cutting forces and clean surface finishes. How does the single-sided chipbreaker affect machining? A single-sided chipbreaker on the CPGT090302 TH10 insert controls chip formation for stable chip evacuation and helps to produce consistent surfaces when matched to the workpiece stability and feed parameters. Is the insert compatible with existing ISO holders? Compatibility depends on matching form, clearance angle, tolerance class, fixation method, size and thickness; the ISO rhombic geometry and locating hole of this insert facilitate use with standard holders that accept 09-size plates. When should a coated grade be chosen instead of TH10? Choose a coated grade when higher thermal or abrasive resistance is required—for heavy interrupted cuts or harder alloys—whereas the uncoated TH10 excels in situations prioritising low cutting forces and neat surfaces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPGT 090302 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO geometry, a sharp uncoated TH10 grade and reliable chip control for efficient turning of non‑ferrous materials; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. CPGT090302 TH10 CPGT indexable insert for turning — Tungaloy CPGT090302 TH10 Tungaloy indexable insert for ISO‑standard turning applications, designed for external and internal turning with a single‑sided chipbreaker. ISO CPGT 090302 geometry TH10 uncoated carbide grade Rhombic 09 shape, 80° included angle Single‑sided chipbreaker, hole with countersink Improved surface quality and lower cutting forces for non‑ferrous turning The combination of a sharp TH10 uncoated carbide edge and a 0.2 mm corner radius delivers low cutting forces and consistent surface finish when machining aluminium, brass and many plastics. The uncoated grade provides a clean cutting edge that reduces built‑up edge formation in softer materials; this means less secondary finishing and more predictable part quality. For workshops seeking repeatable results in everyday production, the insert’s geometry supports stable machining cycles and reliable chip separation thanks to the single‑sided chipbreaker. ISO conformity and straightforward holder compatibility Supplied as an ISO indexable insert (CPGT090302), the plate follows standard dimensions so compatibility with matching holders is primarily determined by form, rake angle, tolerance class, attachment method, size and thickness. The plate shape is rhombic 09 with an 80° included angle, a freespace/rake angle of 11° and a plate thickness of 3.18 mm, which together define seating, clamping and cutting line. The insert includes a cylindrical hole with a one‑sided countersink (40°–60°) to secure precise clamping and repeatable positioning in the toolholder. These standardised attributes ease tool selection and inventory management across conventional turning tool systems. Practical workshop benefits: handling, changeover and system setup The insert forms part of a complete turning system: ISO insert, matching external holder or boring bar, support pad/clamping set and replacement screws. The modest 0.2 mm radius allows fine detail work while remaining robust for typical turning operations, and the uncoated carbide substrate supports economical reordering and simple in‑house changeovers. The TH10 designation signals a universal, sharp grade optimised for non‑ferrous applications where low cutting effort and clean surfaces matter. For production environments where setup time and process stability determine throughput, this combination reduces interruptions and supports predictable cycle times. Selecting the right chipbreaker and workpiece combinations Chip control is critical for safe, efficient turning. The single‑sided chipbreaker fitted to this plate is effective when paired with appropriate feeds and depths of cut for softer alloys and plastics; it encourages short, controllable chips rather than long ribbons. When machining materials outside the typical non‑ferrous range, consider alternative grades or coated options; the TH10 plate excels where minimal cutting force and surface cleanliness are priorities. For clarity on holder fitment or to confirm the ideal chipbreaker for a specific alloy, refer to the holder manufacturer’s tool compatibility chart or consult the technical team. For technical assistance or to order the CPGT090302 TH10 insert from Tungaloy, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast delivery. Technical data Article number: 6802397 Manufacturer SKU: TUN6802397 Manufacturer item: 6802397 Core data Insert designation: CPGT090302 Corner radius: 0.2 mm Included angle: 80° Rake/freespace angle: 11° Plate thickness: 3.18 mm Plate size: 09 Design / Features Carbide, uncoated ISO indexable turning insert Rhombic plate form Single‑sided chipbreaker With hole: cylindrical hole + one‑sided countersink (40°–60°) Application: Turning (external and internal) FAQ What materials is this insert best suited to? The TH10 uncoated carbide grade is designed for non‑ferrous materials such as aluminium, brass and many plastics, where low cutting forces and a sharp edge support clean surfaces. How can compatibility with a toolholder be confirmed? Compatibility depends on form, rake angle, tolerance class, attachment, size and thickness; the CPGT090302 fits holders designed for rhombic 09 inserts and requires matching clamping geometry. What does 'uncoated carbide' mean for performance? An uncoated carbide insert offers a sharp, exposed cutting edge that reduces built‑up edge in softer materials and simplifies regrinding or replacement compared with coated alternatives. Can the insert be used for internal as well as external turning? Yes, the geometry and single‑sided chipbreaker of this indexable insert make it suitable for both external and internal turning operations when matched with the correct holder. What effect does the 0.2 mm corner radius have? A 0.2 mm radius provides a balance between a crisp cutting edge for fine surface finish and sufficient strength to withstand typical turning loads in non‑ferrous machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPGT 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing, low cutting forces and ISO compatibility for consistent turning results. Order genuine inserts via Metav Werkzeuge or consult their technical team for tailored machining recommendations. CPGT090304 NS9530 — ISO rhombic turning insert for turning, 11° clearance (Tungaloy) The CPGT090304 NS9530 is an ISO‑standard rhombic insert designed for finishing turning of steel, combining an uncoated cermet grade with a sharp cutting edge for low cutting forces and superior surface quality. Uncoated cermet grade NS9530 Sharp cutting edge for finishing 11° clearance angle for stable cuts Rhombic 09, 3.18 mm thickness Exceptional surface finish for finishing operations The uncoated cermet grade NS9530 is optimised for finishing operations on steel, offering a sharp cutting edge that reduces built-up edge and enables lower cutting forces. This results in high surface finish with minimal tool-induced vibration during continuous cuts and small depths of cut. The material combination provides thermal stability at finishing speeds and helps maintain dimensional accuracy across long batches, making the insert suitable for components where surface integrity is critical. ISO compatibility and secure clamping for predictable performance Designed to the ISO geometry, the insert’s rhombic form and tolerance class ensure repeatable seating in standard holders; compatibility depends on form, clearance angle, tolerance, fixation, size and thickness. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) to match indexed clamping systems and replacement screws. Correct selection of a matched holder and underlay yields secure clamping, consistent tool projection and predictable cutting forces, reducing setup variability and scrap rates in production turning lines. Practical guidance to improve cycle-time and reduce rework With a corner radius of 0.4 mm and a thickness of 3.18 mm, the insert supports low‑depth, high‑quality finishing cuts where chip control and surface integrity are priorities. The one‑sided chipbreaker supports effective chip formation for continuous cuts on steels, while the uncoated cermet substrate preserves the edge geometry for repeated passes. Selecting this finishing grade can shorten downstream operations, lower the need for secondary polishing and contribute to overall productivity gains on medium‑ to high‑volume turning processes. For precise finishing of steel components with original Tungaloy quality, contact Metav Werkzeuge for availability and machining advice at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6997922-Tungaloy Manufacturer SKU: TUN6997922 Manufacturer article number: 6997922 Model series: ISO turning indexable inserts Dimensions & measurable data Insert size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Features & applications Designation: CPGT090304 Grade: NS9530 (uncoated cermet) Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Insert shape: rhombic Primary application: Turning (external and internal); finishing of steel; continuous cuts and small depths of cut FAQ What materials is this insert suitable for? The NS9530 uncoated cermet grade is intended primarily for finishing operations on steel; the insert is optimised for continuous cuts and small depths of cut where surface quality is essential. Is the insert coated? This indexable insert is an uncoated cermet grade (NS9530), chosen for its sharp edge and thermal stability in finishing applications. Which insert geometry and size does it have? The insert is a rhombic 09 form with a corner radius of 0.4 mm, a thickness of 3.18 mm and an included angle of 80°. How is the insert clamped in the holder? Clamping relies on ISO‑standard seating; the insert has a cylindrical hole with a one‑sided countersink (40°–60°) to suit standard clamping screws and underlays for secure indexing. Can this insert be used for roughing operations? This grade is a finishing sort with a sharp cutting edge and low cutting forces; for heavy roughing operations a more robust grade and a different chipbreaker are recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPGT 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, low cutting forces and ISO compatibility for reliable turning results; the uncoated NS9530 cermet grade gives a sharp cutting edge and consistent surface quality. Order the CPGT090304 NS9530 directly via Metav Werkzeuge or ask our consultants if needed. CPGT 090304 NS9530 CPGT — ISO turning insert for finishing, Tungaloy CPGT090304 NS9530 — a rhombic ISO turning insert for finishing operations in steel, designed for continuous cuts and small depths of cut Rhombic ISO geometry for stable finishing Uncoated NS9530 cermet for sharp edges 0.4 mm corner radius for fine surface quality Cylindrical hole with single-side countersink (40°–60°) Consistent finishing performance with minimal cutting forces The NS9530 grade is specified as an uncoated cermet finishing material that delivers a sharp cutting edge and low cutting forces, which directly translates to improved surface finishes on steel. For finishing operations, reduced cutting forces mean less tool-induced vibration and better dimensional stability, so parts meet tolerance at the first pass. Where continuous cuts and small depths of cut are standard, this grade maintains edge integrity and produces consistently smooth surfaces, reducing downstream grinding or polishing effort. Secure clamping and ISO compatibility for predictable production Compatibility with toolholders depends on form, relief angle, tolerance class, clamping and plate thickness — all ISO‑defined dimensions ensure interchangeability across standard holders. The insert features a cylindrical hole with a single-side countersink (40°–60°) for secure axial and radial positioning, while the rhombic shape and 80° included angle give stable support in the pocket. Choosing holders and clamping sets that match these parameters minimises chatter and setup variability, increasing process reliability on batch or single‑piece production. Material composition explained: why cermet works for finishing Cermet is a ceramic‑metal composite optimised for fine finishes and edge retention at moderate cutting temperatures. The combination of a carbide body and an uncoated cermet top grade provides a balance between wear resistance and the ability to form a sharp edge. That balance results in extended life in finishing applications without the need for coatings that can blunt the initial edge. The 0.4 mm corner radius supports fine profile control while the 11° relief angle reduces rubbing on the flank face, lowering heat generation and preserving workpiece integrity. Practical advantages in routine turning and recommended use Designed for external and internal turning, this insert suits operations where surface integrity and repeatable dimensions matter. The single-sided chipbreaker style is intended for predictable chip formation in continuous cuts; combined with small depth of cut strategies, this reduces the risk of built-up edge and enhances throughput. For shops aiming to improve first‑pass yield and reduce rework, the geometry and grade provide an economical route to higher process stability and superior finish quality. For tailored advice on toolholder pairing or to order the Tungaloy CPGT090304 NS9530 finishing insert, contact Metav Werkzeuge — technical consultants are available to assess suitability for the intended turning application Technical Data Article number: 6997921 SKU: 6997921-Tungaloy Manufacturer SKU: TUN6997921 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts ISO designation: CPGT090304 Size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 80° Special features Uncoated cermet grade NS9530 Rhombic plate form Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Intended application: Turning (external and internal) Suitable for continuous cut and small depths of cut FAQ What materials is this insert best suited for? This insert is a finishing grade optimised for steel; the NS9530 uncoated cermet is specified for fine surface finishes and low cutting forces when turning steel. How does the hole and countersink affect clamping? The cylindrical hole with a single-side countersink (40°–60°) ensures secure location and clamping stability in compatible ISO holders, improving repeatability during turning. Is the 0.4 mm corner radius suitable for profile work? A 0.4 mm corner radius balances profile fidelity and edge strength, making it appropriate where fine surface quality and dimensional control are required. Can this insert be used for interrupted cuts? The NS9530 finishing grade and single-sided chipbreaker are primarily intended for continuous cuts and small depths of cut; interrupted cuts may accelerate wear and are not the primary recommendation. Which holder parameters must match to ensure compatibility? Compatibility is determined by the insert form, relief angle (11°), tolerance class, clamping method, size and thickness (3.18 mm); matching these ISO parameters ensures proper fit and function. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPGT 090304 TH10 Wendeplatten - Tungaloy
Benefit from a cost-effective, precision‑oriented solution that combines an uncoated cemented carbide grade TH10 with a 0.4 mm corner radius for consistent surface quality and low cutting forces. Order the inserts directly via Metav Werkzeuge or request tailored advice from our consultants for fast technical support. CPGT090304 TH10 Tungaloy — ISO turning insert for external and internal turning (rhombic 09, 80°) A CPGT090304 TH10 indexable insert designed for turning operations, offering low cutting forces and clean surface finishes on non‑ferrous materials. ISO indexable insert, rhombic 09 Uncoated cemented carbide grade TH10 0.4 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Precision and performance for higher productivity The insert delivers measurable gains in process stability thanks to the combination of a TH10 sharp universal grade and uncoated cemented carbide construction. The 0.4 mm corner radius supports a fine surface finish while maintaining edge strength, which reduces rework and downstream operations. With an 80° geometry, the insert balances radial support and cutting capacity for common turning tasks, leading to a reduction in cycle time where cutting forces are minimised and tool change frequency is controlled. Compatibility and secure clamping in ISO systems As an ISO‑standard indexable plate, compatibility with the clamping system is determined by form, relief angle, tolerance class, attachment, size and thickness. The rhombic 09 shape and 3.18 mm thickness fit into standard holders when the mounting details match; the plate's cylindrical hole with an integrated one‑side countersink (40°–60°) provides reliable axial positioning and repeatable clamping. For holder selection and verification, Metav Werkzeuge can provide application support and ensure the insert matches the toolholder geometry. Material suitability and cut quality The TH10 grade is formulated as a sharp universal option for non‑ferrous materials where a clean cutting edge aids surface quality. It is particularly effective on Aluminium and Copper, and on components where low cutting forces are essential; it also performs well on components containing Messing. Because the cutting edge is uncoated, friction is lower in many light‑alloy applications, which helps prevent built‑up edge and promotes consistent part finish without aggressive abrasives or coatings. Predictable chips, repeatable results and economic use The single‑sided chipbreaker supports reliable chip formation for a range of feeds, helping to avoid entanglement and improving process safety in automated and manual turning. Combined with the 80° geometry and the robust substrate, this insert is suitable for a productive turning cycle where repeatability and predictable tool life are priorities. The indexability of the plate increases cost efficiency by allowing multiple cutting edges per insert, while the straightforward ISO interface reduces set‑up time and tooling complexity. For procurement or application advice on Tungaloy indexable inserts, contact Metav Werkzeuge for expert guidance and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6802399 Manufacturer SKU: TUN6802399 Model series: ISO‑Drehwendeschneidplatten Material: Cemented carbide Grade: TH10 Facts Thickness: 3.18 mm Corner radius: 0.4 mm Free angle: 11° Included angle: 80° Size designation: 09 Special features Rhombic plate form Cylindrical hole with one‑side countersink (40°–60°) Single‑sided chipbreaker ISO‑standard indexable insert Suitable for turning, external and internal FAQ Which materials are best processed with this insert? The CPGT090304 TH10 insert from Tungaloy is optimised for non‑ferrous materials such as Aluminium and Copper and performs well on components containing Messing, delivering low cutting forces and clean surfaces. How does the TH10 grade affect cutting performance? The TH10 uncoated grade provides a sharp cutting edge that reduces cutting resistance and helps avoid built‑up edge, resulting in improved surface finish and stable machining in light alloy turning operations. What should be checked for holder compatibility? Compatibility depends on the holder's form, relief angle, tolerance class, attachment, size and thickness; the rhombic 09 shape, 3.18 mm thickness and the plate's hole style must match the toolholder specifications for safe clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPGT 090304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of an uncoated carbide cutting edge, precise ISO compatibility and a compact 0.4 mm corner radius to achieve low cutting forces and consistent surface quality in non‑ferrous turning operations; order directly via Metav Werkzeuge or consult our team for application guidance. CPGT090304 TH10 Tungaloy indexable insert — ISO rhombic turning insert for external and internal turning The CPGT090304 TH10 is an ISO‑standard rhombic indexable insert for external and internal turning, featuring a single‑sided chipbreaker and a cylindrical hole with a one‑sided countersink for reliable clamping. Uncoated carbide grade TH10 ISO rhombic insert CPGT090304 0.4 mm corner radius for fine finishing Single‑sided chipbreaker with hole and countersink Reduced cutting forces and improved surface finish for non‑ferrous machining The CPGT090304 TH10 Tungaloy insert uses an uncoated carbide grade engineered for low cutting forces, which supports cleaner chip formation and a clean surface finish on non‑ferrous materials. In practice, lower cutting forces reduce vibration and the load on the toolholder, resulting in fewer rejects and less downstream rework. For process planners this means a tangible gain in cycle stability and predictable output when turning aluminium, brass or other non‑ferrous alloys. ISO compatibility that simplifies tool changes and reduces downtime Supplied as an ISO‑standard rhombic insert, the geometry and fixation details of this grade ensure interchangeability with holders designed for the 090304 form. The 11° clearance and 80° approach angle, together with a 3.18 mm thickness, make the insert suitable for a broad range of external and internal turning set‑ups. Because compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness, selecting an insert that matches those parameters streamlines tool replacement and shortens machine stoppages. Practical application and selection guidance for reliable results For finishing and light roughing on non‑ferrous materials the 0.4 mm corner radius delivers the balance between edge strength and the fine profile required for good surface integrity. The single‑sided chipbreaker is designed to control chips in stable setups; match the chipbreaker style and grade to the workpiece stability and feed rate for best results. The insert’s cylindrical hole with a one‑sided countersink (40°–60°) enhances positive clamping and repeatability in indexing, while the uncoated cutting edge is the preferred choice where low adhesion and reduced built‑up edge are critical. Contact Metav Werkzeuge for tailored advice on fixture compatibility and process parameters, or request assistance from our technical consultants to ensure the CPGT090304 TH10 is optimally matched to the application Technical data Article number: 6802401 Manufacturer SKU: TUN6802401 SKU: 6802401-Tungaloy Model series: ISO‑turning indexable inserts Label: CPGT090304 TH10 Tungaloy‑insert Facts ISO designation: 090304 Corner radius: 0.4 mm Clearance angle: 11° Approach angle: 80° Thickness: 3.18 mm Size: 09 Special features Material: cemented carbide (uncoated) Shape: rhombic Chipbreaker: single‑sided Hole: cylindrical hole with one‑sided countersink (40°–60°) Application: external and internal turning Suitability: optimised for non‑ferrous materials Compatibility: depends on form, clearance angle, tolerance, clamping, size and thickness FAQ Which materials are best machined with this insert? The CPGT090304 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated carbide grade provides low cutting forces and reduced built‑up edge. Is the insert compatible with standard ISO holders? Compatibility is ensured when the holder matches the insert form, clearance angle, tolerance class, clamping arrangement, size and thickness specified for ISO‑090304 inserts. What is the role of the countersunk hole? The cylindrical hole with a one‑sided countersink (40°–60°) improves clamping stability and repeatable indexing of the insert in the toolholder. For which operations is the 0.4 mm radius suitable? A 0.4 mm corner radius is suitable for fine finishing and light turning operations where a balance of edge strength and surface quality is required. How should the chipbreaker be matched to the job? Select a chipbreaker and grade according to workpiece material, feed and the rigidity of the set‑up; the single‑sided breaker here supports controlled chips in stable conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT - 090304 - AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH6225 grade and a stable cutting geometry to improve productivity and tool life in stainless-steel turning operations; the ISO-compatible design ensures secure clamping and quick indexable insert changes. Order this insert through Metav Werkzeuge or consult our specialists for application advice. CPMT 090304 AH6225 – Tungaloy indexable insert for turning The CPMT090304 AH6225 is an ISO‑standard rhombic indexable insert for external and internal turning, optimised for stainless steels and medium machining with a sharp yet stable cutting edge. ISO rhombic insert CPMT 09 size PVD-coated AH6225 for stainless steels Single-sided chipbreaker and countersunk hole Secure seating with precise 11° clearance angle Consistent performance for stainless-steel turning The PVD coating combined with the AH6225 grade on a cemented carbide substrate delivers a balance of wear resistance and edge stability for variable cutting conditions. This composition supports a sharp cutting edge that resists built-up edge formation when machining austenitic and other stainless steels, reducing the need for frequent index changes. The result is improved process reliability and longer effective tool life, which together translate into fewer interruptions and more predictable cycle times on the shop floor. Secure clamping and effective chip control for reliable production The rhombic geometry with a defined 11° clearance angle and a corner radius of 0.4 mm ensures repeatable seating in ISO‑compliant holders; the insert’s cylindrical hole with one-sided countersink (40°–60°) provides positive locating and clamping stability. The single-sided chipbreaker guides chips away from the cutting zone, lowering the risk of entanglement and minimising rework. Clear mechanical location and reliable chip control reduce setup time and contribute to consistent surface finish and dimensional accuracy during serial production. System setup and process advantages for shops As part of an ISO‑based system, the insert functions together with a matching external holder or boring bar, the correct underlay/clamp set and replacement screws for safe operation. The plate thickness of 3.18 mm and the standard CPMT size allow easy replacement across common clamping systems. For practical use, select the chipbreaker and grade according to material, cutting parameters and machine stability; this approach optimises cutting forces and extends edge life, making the tooling solution cost‑effective for medium turning tasks while maintaining high process safety. For reliable stainless‑steel turning choose the Tungaloy CPMT090304 AH6225 insert and contact Metav Werkzeuge for a tailored recommendation or further technical information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6829278 Manufacturer SKU: TUN6829278 Item designation: CPMT090304 AH6225 Manufacturer: Tungaloy Facts Thickness: 3.18 mm Clearance angle: 11° Included angle: 80° Corner radius: 0.4 mm Size: 09 Features Grade: AH6225 (PVD‑coated cemented carbide) Shape: rhombic Mounting: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: external and internal turning Compatibility: ISO indexable insert, fits holders matching form, clearance, tolerance, fastening, size and thickness Intended for: stainless steels, medium machining and varying conditions FAQ What materials is this insert suitable for? The CPMT090304 AH6225 insert is designed primarily for stainless steels and performs well in medium turning applications where a sharp, stable cutting edge is required. How does the PVD coating benefit performance? The PVD coating on the AH6225 grade enhances wear resistance and reduces built‑up edge formation, which increases the insert’s effectiveness when machining stainless steels under variable conditions. Which clamping and holder components are required for safe use? A matching ISO‑compliant external holder or boring bar, an appropriate underlay/clamp set and the correct replacement screws are required to secure the CPMT090304 insert and ensure stable cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 060202 AH6225 Wendeplatten - Tungaloy
Take advantage of a sharp, stable cutting edge and a PVD-coated carbide grade optimised for stainless steels to maintain productivity under varying conditions; order the insert via Metav Werkzeuge or consult our specialists for application advice. CPMT 060202 AH6225 Tungaloy indexable insert for turning The CPMT060202 AH6225 is an ISO rhombic, single-sided turning insert designed for medium finishing and medium-duty operations on stainless steels. CPMT060202 AH6225 ISO rhombic insert PVD-coated carbide for stainless steels 0.2 mm corner radius, 11° relief angle Cylindrical hole with 40°–60° countersink Consistent metal removal and predictable tool life The PVD-coated carbide grade AH6225 is developed for a balance of sharpness and edge strength, delivering stable chip formation and extended service in interrupted or mixed cutting conditions. That combination reduces the need for frequent index changes and helps sustain process throughput. The coating improves wear resistance at elevated temperatures commonly encountered when machining stainless steels, thereby supporting a reliable production rhythm and lower overall tooling cost per component. Geometry tuned for repeatable surface quality A 0.2 mm corner radius and an 11° relief angle provide a compromise between profile strength and surface finish. The rhombic 80° shape ensures access to both external and internal turning tasks while the single-sided chipbreaker contributes to predictable chip control when paired with appropriate feeds. These geometric choices mean fewer rejects and more consistent part tolerances, even where operators vary or machine dynamics change. Secure mounting and flexible holder compatibility Mounting is via a cylindrical hole with a one-side countersink (40°–60°), a common configuration that supports precise clamping and repeatable seating. Compatibility with a given holder is governed by insert form, clearance angle, tolerance class, fixing method, size and thickness, allowing integration into existing ISO-compliant tool systems without extensive adaptation. The 2.38 mm plate thickness and standard size designation contribute to robust clamping and stable cutting conditions. Practical advantages for workshop workflows The insert is part of an ISO series intended for straightforward tool management: standardised indexability lowers tooling stock complexity and simplifies changeover routines. With a universal grade tailored to stainless steels, the cutting edges remain serviceable across a range of turning tasks, supporting multi-job shops seeking flexibility. The result is less downtime for tool swaps and smoother planning of production batches. Contact Metav Werkzeuge today to discuss how the CPMT060202 AH6225 can fit into existing turning setups or to request a tailored cutting recommendation; email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a consultant Technical data Article number: 6951147 Manufacturer SKU: TUN6951147 SKU: 6951147-Tungaloy Designation: CPMT060202 AH6225 Tungaloy indexable insert Series: ISO turning indexable inserts Facts Shape size: 06 Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Lead/angle: 80° Special features PVD-coated carbide grade AH6225 Single-sided chipbreaker Cylindrical hole with one-side countersink (40°–60°) Rhombic plate form for external and internal turning Intended application: turning, optimised for stainless steels ISO-standardised insert for compatible holders FAQ What materials is this insert best suited for? The AH6225 grade is formulated for machining stainless steels, offering a combination of sharpness and edge stability for medium finishing and varying cutting conditions. How is the insert mounted in the holder? Mounting uses a cylindrical hole with a one-side countersink (40°–60°); the CPMT060202 format is compatible with ISO-compliant holders that match the insert form, clearance angle and thickness. What benefits does the PVD coating provide? The PVD-coated carbide surface on this insert enhances wear resistance at higher cutting temperatures and contributes to longer edge life and consistent chip control in stainless-steel turning. Can this insert be used for both external and internal turning? Yes, the rhombic plate form and 80° lead make the insert suitable for both external and internal turning operations when paired with the correct holder geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 AH6225 Wendeplatten - Tungaloy
Take advantage of the universal AH6225 grade and ISO conformity for steady production: the PVD-coated carbide compound provides a sharp yet stable cutting edge tailored to rostfreier Stahl, while the ISO geometry ensures quick integration into existing holders. Order directly via Metav Werkzeuge or consult the technical team for holder compatibility and cutting parameters. CPMT060202 AH6225 ISO turning indexable insert — PVD-coated carbide, 80° rhombic geometry, Tungaloy A CPMT060202 AH6225 indexable insert for turning, designed for external and internal machining and optimised for rostfreier Stahl under variable cutting conditions PVD-coated carbide for rostfreier Stahl machining ISO 060202 rhombic insert with 80° geometry 0.2 mm nose radius for fine finishing One-sided chipbreaker for consistent swarf control Reliable machining for rostfreier Stahl and mixed materials The PVD-coated AH6225 grade delivers a combination of a sharp, wear-resistant cutting edge and toughness suited to mid-range cutting conditions. As a universal grade for rostfreier Stahl, this PVD-treated carbide insert balances edge stability with resistance to built-up edge, reducing the need for frequent tool changes and decreasing downtime. The composition is aimed at achieving consistent component quality across batch variations, which translates into measurable productivity gains and fewer scrapped parts in serial production. Precision geometry that improves surface finish and tolerance control The ISO 060202 designation denotes a rhombic insert with an 80° main cutting face, offering a versatile cutting angle for a wide range of turning operations. A 0.2 mm nose radius supports fine finishing and close dimensional control, while the 11° relief helps to reduce rubbing and heat at the flank. The one-sided chipbreaker is engineered to produce controlled swarf formation, which supports steady chip evacuation and reduces the risk of surface damage. For customers unfamiliar with these terms: the nose radius influences surface waviness and strength at the tip, the relief angle prevents contact between the insert flank and the workpiece, and a chipbreaker shapes chips to aid both safety and process reliability. ISO compatibility and system benefits for faster tool changes Designed as an ISO-standard indexable plate, the insert fits holders that match by form, relief, tolerance class, fastening method, size and thickness. The plate’s cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable positioning, while the 2.38 mm plate thickness contributes to rigidity under radial and axial loads. Integration into an established holder system reduces setup time and simplifies inventory management: using ISO-compliant plates allows flexible replacement and predictable performance. Together, these attributes contribute to improved process security and a lower cost per finished part. For application-specific recommendations or to source Tungaloy AH6225 inserts and compatible holders, contact Metav Werkzeuge for expert support and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6951188 Manufacturer SKU: TUN6951188 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Core dimensions ISO designation: CPMT060202 Size: 06 Plate thickness: 2.38 mm Corner radius: 0.2 mm Shape: Rhombic, 80° Clearance: 11° Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Materials & features Material: Carbide Grade/coating: AH6225 (PVD-coated carbide) Chipbreaker: one-sided Application: Drehen Compatibility: ISO holders by form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The AH6225 grade is formulated primarily for rostfreier Stahl; the CPMT060202 insert also performs well across mixed batches where a balance between edge sharpness and toughness is required. How does the chipbreaker affect machining performance? A one-sided chipbreaker on this insert provides controlled swarf formation and evacuation, which helps maintain surface quality and reduces the risk of chip entanglement during turning operations. Which holders will accept the CPMT060202 plate? ISO-compatible turning holders that match the plate’s form, size, thickness and tolerance class will accept the CPMT060202; secure clamping is supported by the cylindrical hole with a single-sided countersink. What does the 0.2 mm nose radius mean for finishing? A 0.2 mm nose radius supports fine surface finishes and tight dimensional tolerances while retaining sufficient edge strength for medium-duty turning. Is the AH6225 coating suitable for variable cutting conditions? Yes, the PVD-coated AH6225 carbide grade is designed for stable performance under changing conditions, combining a sharp cutting edge with wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 AH6225 Wendeplatten - Tungaloy
CPMT060202 AH6225 Wendeplatte für Drehen – Tungaloy CPMT060202 AH6225 ist eine ISO-genormte Hartmetall-Wendeplatte für das Drehen von rostfreien Stählen und bietet eine scharfe, stabile Schneidkante für mittlere Schnittbedingungen CPMT060202 AH6225 Wendeplatte für rostfreie Stähle PVD-beschichtetes Hartmetall für erhöhte Standzeit Rhombische 06-Form mit 0,2 mm Eckenradius Mit Loch und zylindrischer Senkung 40°–60° Einseitiger Spanbrecher für kontrollierten Spanfluss Präzise Schneidkante für rostfreie Stähle und mittlere Bearbeitungen Die CPMT060202 AH6225 kombiniert PVD-Beschichtung und Hartmetall-Substrat, um bei wechselnden Schnittbedingungen eine konstante Leistung zu liefern. Durch die speziell abgestimmte Sorte AH6225 entstehen eine scharfe und zugleich stabile Schneidkante sowie eine verbesserte Widerstandsfähigkeit gegen Aufbauschneiden. Für Fertigungsprozesse bedeutet das höhere Prozesssicherheit und längere Standzeiten bei typischen Einsatzfällen im Außen- und Innendrehen von rostfreiem Stahl. Systemkompatibilität und einfache Integration in den Zerspanungsprozess Die Plattenkompatibilität wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt; deshalb passt die rhombische 06-Form der Platte in zahlreiche ISO-Genormte Halter. Der Freiwinkel 11° und der Eckenradius 0,2 mm erlauben präzise Schnitte mit guter Oberflächenqualität. Werkstattbetriebe und CNC-Anwender profitieren von der klaren Systemzuordnung: Halter, Unterlage und Schraube müssen entsprechend der Norm ausgewählt werden, damit die Aufnahme zuverlässig und vibrationsarm erfolgt. Spankontrolle und Praxisnutzen für produktive Zerspanung Der einseitige Spanbrecher der Platte sorgt für geregelten Spanabfluss, was besonders bei schwankenden Schnittparametern und instabilen Zuständen vorteilhaft ist. Die Ausführung „mit Loch“ und die zylindrische Senkung (40°–60°) vereinfachen die Befestigung und sorgen für reproduzierbare Sitzverhältnisse. Diese Eigenschaften machen die Platte geeignet für industrielle Anwendungen, in denen Effizienz, Wiederholgenauigkeit und einfache Handhabung im Vordergrund stehen. Für produktive und zuverlässige Bearbeitung rostfreier Stähle die CPMT060202 AH6225 bei Metav Werkzeuge anfragen oder technische Beratung per eMail an info@metav-werkzeuge.com / Telefon +49 2822 7131930 in Anspruch nehmen Technische Daten Grunddaten Artikelnummer: 6947669 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6947669 Fakten Plattengröße: 06 Plattendicke: 2,38 Eckenradius: 0,2 mm Freiinkel: 11° Winkel: 80° Besonderheiten Beschichtung: AH6225 (PVD) Schneidstoff: Hartmetall Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig ISO-genormt Einsatz: Drehen FAQ Welche Werkstoffe sind für die CPMT060202 AH6225 am besten geeignet? Die CPMT060202 AH6225 ist speziell für die Bearbeitung von rostfreien Stählen optimiert; die Kombination aus PVD-Beschichtung und Hartmetallsubstrat erhöht die Standzeit und verbessert die Spanbildung bei mittleren Schnittbedingungen. Wie beeinflusst der Eckenradius die Oberflächenqualität? Ein Eckenradius von 0,2 mm ermöglicht feine Konturen und trägt zu einer guten Oberflächenqualität bei, ohne die Schnittstabilität wesentlich zu beeinträchtigen; für gröbere Vorschübe kann ein größerer Radius gewählt werden. Welche Bedeutung hat die zylindrische Senkung am Loch? Die zylindrische Senkung (40°–60°) sorgt für sicheren Sitz auf dem Halter und ermöglicht reproduzierbare Befestigungsbedingungen, was Vibrationen reduziert und die Werkzeuglebenserwartung erhöht. Kann die Platte für Innen- und Außendrehen verwendet werden? Ja, die ISO-Genorm und die rhombische Form machen die Platte flexibel einsetzbar für Außen- und Innendrehanwendungen, wobei geeignete Halter und Unterlagen zu wählen sind. Wie wirkt sich die PVD-Beschichtung auf die Standzeit aus? Die PVD-Beschichtung der Sorte AH6225 verbessert die Verschleißfestigkeit der Schneidkante und reduziert Adhäsion bei rostfreien Stählen, was in vielen Fällen zu verlängerten Standzeiten führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CPMT 060202 AH725 Wendeplatten - Tungaloy
Take advantage of a universal, fracture‑resistant grade paired with precise rhombic geometry to secure consistent machining results and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CPMT 060202 AH725 ISO turning insert — rhombic 80° geometry by Tungaloy The CPMT060202 AH725 is an ISO‑standard rhombic turning insert for external and internal turning, designed for robust performance on steel and stainless steel in mixed‑material production. PVD‑coated AH725 grade for steels ISO rhombic 80° geometry 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent process security for mixed steels The combination of a PVD‑coated surface and the AH725 carbide grade delivers a balance between toughness and wear resistance, making the insert suitable for both standard steel and stainless steel. This universal, fracture‑resistant grade was developed for situations with changing workpiece materials and for smaller tooling where process stability is critical. As a result, the tooling run‑time becomes more predictable and the risk of unexpected insert breakouts is minimised, supporting tighter production schedules and reduced scrap rates. Precision geometry for repeatable surface quality An 80° geometry and a 0.2 mm corner radius combine to produce stable cutting behaviour with low vibration and consistent chip formation. The 11° clearance angle lowers rubbing at depth of cut and helps maintain a clean cutting edge, while the one‑sided chipbreaker controls chip flow for improved turning accuracy. In practice, these geometric parameters translate into a measurable improvement in surface finish and repeatability, especially on finishing and light‑roughing passes where dimensional consistency matters. Easy integration and reliable handling in ISO tool systems The insert is manufactured to ISO standards and features a cylindrical hole with a single‑side countersink (40°–60°), a plate thickness of 2.38 mm and a rhombic plate form size 06, ensuring compatibility with a wide range of holders and boring bars. Compatibility is determined by shape, clearance, tolerance class, attachment method, size and thickness; the standardised form allows rapid replacement and straightforward inventory management. The resulting setup efficiency reduces changeover time and supports uninterrupted production in both single‑piece and batch environments. The product is supplied under the Tungaloy name and is identified by the manufacturer article number for traceability. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts and to verify the CPMT 060202 AH725 specification for specific process demands — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6865479 Manufacturer SKU: TUN6865479 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Facts Geometry angle: 80° Clearance (free) angle: 11° Corner radius: 0.2 mm Plate thickness: 2.38 mm ISO designation: 060202 Plate size: 06 Special features Grade: AH725 Coating: PVD‑coated Chipbreaker: one‑sided Hole style: cylindrical hole + single‑side countersink (40°–60°) Plate form: rhombic Application: turning (external and internal) Compatibility: ISO holders; determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CPMT060202 AH725 insert is formulated for machining steel and stainless steel and performs well where material types vary. How does the AH725 grade affect performance? The AH725 grade provides fracture resistance and broad material coverage, which enhances process security in mixed‑material production. What does the 80° rhombic geometry mean for cutting? An 80° rhombic geometry offers a robust cutting edge and good access for external and internal turning, improving stability and surface finish. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO standards; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness. Which identifying numbers should be used when ordering? Use the manufacturer article number 6865479 or the SKU TUN6865479 to ensure the correct CPMT 060202 AH725 insert is supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 060202 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a universal AH725 PVD-coated carbide grade, ISO conformity and a compact 0.2 mm corner radius for consistent process security and economical turning performance — order directly via Metav Werkzeuge or consult our specialists for application advice. CPMT060202 AH725 ISO turning insert — PVD-coated, universal for steel & stainless steel The CPMT060202 AH725 is an ISO-standard rhombic turning insert intended for external and internal turning of steels and stainless steels, designed to deliver stable chip control and high process security in mixed-material production environments PVD-coated carbide grade AH725 ISO rhombic insert CPMT 06 size 0.2 mm corner radius for fine finishing Cylindrical hole with one-sided countersink Stable cutting performance for mixed steels and demanding production The PVD-coated carbide composition of this insert delivers a robust combination of wear resistance and edge stability. The AH725 grade is formulated as a universal, breakout-resistant option that maintains cutting performance across steel and stainless steel workpieces. The PVD layer improves temperature resistance and adhesion, which translates into more consistent tool life and fewer unplanned tool changes. For operations where material mixes or small tooling are common, this geometry helps to reduce the risk of edge chipping and supports repeatable surface quality. ISO compatibility and fast changeover to reduce downtime Manufactured to ISO specifications, the rhombic CPMT 06 form ensures predictable fitment in standard holders. Compatibility with a toolholder is defined by the insert form, 11° clearance, tolerance class, fastening method, size and 2.38 mm thickness. The insert features a cylindrical hole with a single-sided countersink (40°–60°), allowing secure clamping and straightforward alignment in suitable external holders or boring bars. The cutting system is completed by a compatible support shim/clamping set and replacement screws, which together enable rapid indexation and minimal machine downtime. Fine finishing and reliable chip control for consistent surfaces With a 0.2 mm corner radius and an included angle of 80°, the geometry is tuned for a balance between strength and finish. The single-sided chipbreaker design promotes controlled chip formation and ejection when matched correctly to feed and depth of cut, improving surface finish and tool life. For light finishing passes the small radius helps achieve tighter dimensional tolerances and a refined surface without sacrificing edge longevity. Chipbreaker selection should reflect the workpiece material and the rigidity of the set-up to obtain optimal results. Productivity advantages and practical application guidance The insert’s universal character supports flexible tool inventories and lower tool-change complexity, which can improve throughput and reduce stocking of multiple specialised grades. The ability to run higher cutting speeds with a stable edge and to switch between steels without frequent insert replacement contributes to overall economy. Where process security is critical, the combination of AH725 grade and PVD coating offers consistent performance for short-run batches and mixed-production schedules, making the insert a practical choice for workshops seeking predictable cutting outcomes. For application-specific recommendations and stock enquiries of the Tungaloy AH725 series, please contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid technical guidance and availability. Technical data Article name: CPMT060202 AH725 Tungaloy turning insert Manufacturer article number: 6856769 SKU: 6856769-Tungaloy Manufacturer SKU: TUN6856769 Manufacturer: Tungaloy Core data Insert designation: CPMT060202 Size: 06 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Included angle: 80° Special features PVD-coated carbide, grade AH725 Rhombic/rhomboid insert form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Intended application: turning (external and internal) System requirement: compatible external holder or boring bar, support shim/clamping set, replacement screws FAQ Is this insert suitable for stainless steel? Yes. The CPMT060202 AH725 is specified for steel and stainless steel applications; the AH725 PVD-coated carbide grade provides improved edge stability for a range of stainless materials. Which holders are compatible with this insert? Compatibility depends on the holder matching the ISO CPMT form, 11° clearance, size and 2.38 mm thickness; use holders or boring bars designed for CPMT060202 inserts and the appropriate clamping set. What role does the chipbreaker play for this insert? The single-sided chipbreaker controls chip formation and ejection; when selected to match material and rigidity, it improves surface finish and reduces the risk of edge damage during turning. Does the insert require special mounting hardware? The cutting system comprises the ISO insert plus a matching external holder or boring bar, a support shim/clamping set and replacement screws for secure fastening and correct seating. How does the 0.2 mm radius affect finishing? The small 0.2 mm radius is suited to fine finishing passes, enabling better surface quality and accurate dimensional control while maintaining sufficient edge strength. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 AH8005 Wendeplatten - Tungaloy
Combining the PVD-coated AH8005 carbide grade with a precise 0.2 mm nose radius and ISO‑compliant geometry, this insert ensures consistent surface finish and extended tool life for stable turning operations; order directly via Metav Werkzeuge or consult the team for tailored machining advice. CPMT 060202 AH8005 ISO turning insert (PVD-coated carbide, 0.2 mm radius) – Tungaloy The CPMT060202 AH8005 is an ISO‑standard rhombic turning insert designed for external and internal turning of hard and heat‑resistant alloys, providing robust cutting performance in stable machining setups. PVD-coated carbide AH8005 for high wear resistance ISO rhombic CPMT 06 format, 80° cutting angle Single-sided chipbreaker for controlled chip flow Cylindrical hole with 40°–60° countersink Predictable clamping and ISO compatibility for reliable production The ISO conformity of this indexable insert guarantees straightforward matching with holders when form, clearance angle, tolerance class, fastening, size and thickness are observed; that predictability reduces setup variation and unplanned downtime. The rhombic CPMT 06 geometry and the 80° cutting angle enable secure seat and repeatable indexing, which benefits batch production and CNC turning centres. In practice, fewer indexing adjustments translate to a steadier production flow and higher first‑pass yield for contract manufacturers and job shops alike. Long tool life and thermal stability from the AH8005 grade The AH8005 grade is a PVD‑coated carbide developed for wear resistance in hot and hard materials. The coating enhances oxidation resistance at elevated cutting temperatures and preserves a stable cutting edge during continuous operation. For components in heat‑resistant alloys, nickel‑based materials and similarly demanding steels, the coating plus carbide substrate delivers a lower flank wear rate and more consistent tool life, which in turn reduces tool change frequency and contributes to lower overall machining costs. Improved surface quality and chip control for efficient turning A 0.2 mm nose radius combined with a single-sided chipbreaker helps to balance edge strength with surface finish: the small radius supports fine finishing passes and accurate profile reproduction, while the chipbreaker controls swarf form under varying depths of cut. The insert is supplied with a cylindrical hole and single‑side countersink (40°–60°) for secure clamping in compatible holders; when assembled with the correct clamp set and screws, the system offers repeatable stability. These characteristics make the insert suitable for finishing and medium cutting in applications where controlled chips and consistent surface integrity are priorities. For high‑performance turning with Tungaloy’s AH8005 grade, contact Metav Werkzeuge for availability and application guidance tailored to the machining task Technical Data Manufacturer article number: 6775778 SKU: 6775778-Tungaloy Manufacturer SKU: TUN6775778 Manufacturer: Tungaloy Facts Nose radius: 0.2 mm Clearance angle: 11° Thickness: 2.38 mm Size designation: 06 Cutting angle: 80° Special features Grade/coating: AH8005 (PVD-coated carbide) Shape: rhombic Hole: with hole; cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: Turning Model series: ISO turning indexable inserts FAQ What materials is this insert intended for? The CPMT060202 AH8005 insert is specified for machining hard and heat‑resistant alloys; the AH8005 grade with PVD coating provides improved wear resistance for such materials. Is the insert compatible with standard CPMT holders? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the CPMT 06 format and the cylindrical hole with countersink follow ISO conventions for CPMT holders. How does the 0.2 mm nose radius affect surface finish? A 0.2 mm radius on this turning insert balances edge strength and fine finishing capability, enabling consistent surface quality when used in appropriate feed and depth‑of‑cut ranges. What advantage does the single‑sided chipbreaker provide? The single‑sided chipbreaker on this indexable insert controls chip formation and evacuation, improving process reliability and reducing the risk of built‑up edge in stable turning operations. Which product identifiers should be quoted when enquiring? Reference the CPMT060202 AH8005 Tungaloy insert or manufacturer article number 6775778 (SKU 6775778‑Tungaloy) when requesting stock or technical support. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH8015 grade and a precise 0.2 mm corner radius, delivering a balanced mix of wear resistance and edge stability for dependable turning of heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application advice. CPMT 060202 AH8015 Tungaloy indexable turning insert — PVD-coated carbide, 80° rhombic form CPMT060202 AH8015 is an ISO‑form indexable turning insert designed for general turning operations, optimised for heat‑resistant alloys and compatible with ISO holders that match form, clearance, tolerance, clamping and thickness. ISO rhombic CPMT 060202 form, 80° PVD-coated carbide AH8015 for heat-resistant alloys 0.2 mm corner radius for precise profiles Cylindrical hole with single-side countersink High performance from PVD coating and AH8015 grade The insert is manufactured in a PVD‑coated carbide grade AH8015, which offers an effective compromise between wear resistance and edge stability for machining challenging, heat‑resistant alloys. This material pairing enables consistent cutting at elevated temperatures and reduces frequent indexing, supporting uninterrupted production runs. Compatibility with ISO‑standard clamping and form ensures straightforward integration into existing tool systems without compromise to process reliability. Geometry and chip control for predictable results With an 80° rhombic geometry, 0.2 mm corner radius and 11° clearance, the geometry provides stable cutting engagement and repeatable profile control on external and internal turning tasks. The single‑side chipbreaker is tailored for efficient chip formation and evacuation when paired with appropriate feed and speed settings, minimising rework and improving surface quality. The 2.38 mm plate thickness contributes to insert rigidity and resistance to mechanical deflection during heavier cuts. System fit, assembly and application guidance The ISO insert forms part of a simple system: ISO‑form indexable plate, matching external holder or boring bar, a shim/clamping set and replacement screws where required. Selection should consider workpiece material, machining strategy and machine stability; the AH8015 grade is recommended as a first choice for general machining of heat‑resistant alloys. If cutter geometry or holder compatibility is unclear, provide holder form, size and clamping details so suitability can be verified before purchase. For additional technical data or clarification, Metav Werkzeuge can assist with specifications and set‑up recommendations. Contact Metav Werkzeuge today for tailored advice on Tungaloy CPMT060202 AH8015 indexable inserts and to arrange supply via email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6951189 Manufacturer SKU: TUN6951189 SKU: 6951189-Tungaloy Manufacturer: Tungaloy Model series: ISO indexable turning inserts Designation: CPMT060202 AH8015 Tungaloy insert Measurements Size designation: 06 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Insert angle: 80° Special features Material: carbide Coating: PVD Grade: AH8015 Plate shape: rhombic Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning; heat-resistant alloys FAQ What materials is this insert suitable for? The CPMT060202 AH8015 insert is primarily specified for heat‑resistant alloys, where the PVD coating and AH8015 grade balance wear resistance and edge stability. Is the insert compatible with standard ISO holders? Compatibility depends on matching form, clearance, tolerance class, clamping method, size and thickness; the CPMT060202 form conforms to ISO standards for rhombic turning plates. How does the 0.2 mm corner radius affect results? A 0.2 mm corner radius improves profile accuracy and reduces edge chipping risk at moderate feeds, offering finer surface finish while maintaining sufficient strength for general turning tasks. Does the insert require a specific screw or shim? The insert is designed for ISO clamping systems; the system typically includes an appropriate shim/clamping set and replacement screws as required by the chosen holder. What is the benefit of the single‑side chipbreaker? The one‑sided chipbreaker promotes controlled chip formation for many turning conditions, aiding in evacuation and reducing recutting, which supports consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 060202 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 wear resistance, precise 80° rhombic geometry and a 0.2 mm corner radius for consistent turning results in heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge for holder matching and process optimisation. CPMT 060202 AH8015 Tungaloy indexable insert — Turning, PVD-coated carbide, 80° rhombic The CPMT060202 AH8015 Tungaloy indexable insert is an ISO-standard rhombic turning insert designed for external and internal turning of heat-resistant alloys and general-purpose turning tasks PVD-coated AH8015 carbide grade 80° rhombic geometry, 11° relief angle 0.2 mm corner radius for precise edges Single-sided chipbreaker with cylindrical hole Consistent wear resistance for demanding alloys The AH8015 grade is a PVD-coated carbide developed as a first choice for machining heat-resistant alloys. Its composition balances wear resistance and edge stability, which helps to extend tool life under higher temperatures and abrasive conditions. This results in fewer insert changes and a more predictable production rhythm, while the single-sided chipbreaker aids controlled chip formation and evacuation. The outcome is improved process reliability and a stable surface finish on turned components. Geometry and compatibility that reduce setup time Designed to ISO dimensions, the 80° rhombic geometry with an 11° relief angle ensures broad compatibility with standard turning holders; fit is determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert’s 2.38 mm thickness and cylindrical hole with single-sided countersink (40°–60°) permit secure clamping and repeatable positioning. This dimensional conformity simplifies tool selection and reduces the need for special adapters, allowing quick tool changes and shorter machine downtime. Operational benefits that cut total cost of manufacture Using a balanced grade such as AH8015 and a defined 0.2 mm corner radius supports both medium feeds and fine finishing passes, reducing the number of operations required. The stability of the cutting edge contributes to predictable wear behaviour, which lowers scrap rates and improves first-pass yield. In production runs where consistency matters, the insert’s performance translates into measurable time and cost savings while maintaining component tolerances and surface quality. Practical guidance for application and handling For external and internal turning, the rhombic insert with a one-sided chipbreaker is suited to a range of workpiece stabilities; the chipbreaker geometry should be matched to feed and depth of cut, and the grade chosen according to the alloy and cutting strategy. Insert compatibility must always be checked against the selected holder by form and fastening; correct torque for the clamping screw and clean seating surfaces contribute to repeatable results. The manufacturer article number and SKU are provided below for precise identification in tool inventories. For turning applications in heat-resistant alloys, specify the Tungaloy AH8015 grade when ordering from Metav Werkzeuge — Metav Werkzeuge provides technical matching and fast delivery; contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance and holder recommendations Technical data Article number: 6775779 Manufacturer SKU: TUN6775779 SKU: 6775779-Tungaloy Designation: CPMT060202 Model series: ISO turning indexable inserts Material: Carbide Coating: AH8015 (PVD) Size: 06 Shape: Rhombic Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Geometry angle: 80° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: Turning Core specifications Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Geometry angle: 80° Size code: 06 Special features PVD-coated carbide grade AH8015 First choice for heat-resistant alloys ISO-standard compatibility for holders Rhombic insert for external and internal turning Single-sided chipbreaker for controlled chips Cylindrical hole with one-sided countersink for secure clamping Balanced wear resistance and edge stability FAQ Which materials is this insert suited for? The CPMT060202 AH8015 Tungaloy insert is primarily intended for heat-resistant alloys and general-purpose turning where a balance of wear resistance and edge stability is required. What does the AH8015 grade offer compared with other grades? AH8015 is a PVD-coated carbide formulation optimised for temperature resistance and a stable cutting edge, offering longer life in abrasive or hot cutting conditions when used with the CPMT060202 geometry. How is the insert secured to the holder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) and must be seated on a matching support and clamped with the correct screw and torque to ensure repeatable positioning and secure fixation. What operations is the insert designed for? The CPMT060202 is designed for both external and internal turning; the 80° rhombic shape and 0.2 mm corner radius support a range of feeds from finishing to medium-depth turning. How should the chipbreaker be chosen for a process? Select the single-sided chipbreaker variant based on feed rate and depth of cut; the chipbreaker geometry should match the expected chip load and material to maintain stable chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 AH8015 Wendeplatten - Tungaloy
High-performance PVD-coated carbide and a balanced edge geometry ensure reliable wear resistance and cutting stability for demanding turning tasks; compatibility with ISO holders allows straightforward integration into existing tool systems. Order the CPMT060202 AH8015 Tungaloy indexable turning insert directly via Metav Werkzeuge or consult the specialists for application-specific guidance. CPMT 060202 AH8015 Tungaloy indexable turning insert — PVD-coated carbide, 11° relief The CPMT060202 AH8015 is an ISO-standard indexable turning insert intended for external and internal turning of heat-resistant alloys, offering a rhombic form and a one-sided chipbreaker for controlled swarf management PVD-coated carbide for heat-resistant alloys Balanced wear resistance and edge stability ISO CPMT 060202 geometry with 11° relief Cylindrical hole with 40°–60° countersink Consistent performance on heat-resistant alloys The AH8015 grade combines a PVD-coated carbide substrate with a formulation optimised for elevated temperatures, delivering a balanced compromise between wear resistance and edge stability. This balance reduces the frequency of insert changes and helps maintain consistent component quality during longer runs. For workshops processing demanding superalloys, the result is fewer interruptions and a steadier surface finish, which contributes to predictable production throughput and lower total machining cost per part. Predictable geometry for simple holder matching Built to ISO standards, the ISO CPMT060202 geometry and a nominal 11° relief make the insert compatible with a wide range of commercially available holders when the form, relief angle, tolerance class, fastening method, size and thickness are matched. The rhombic shape with an included angle of 80° and a 0.2 mm corner radius gives a reliable cutting profile for both finishing and light turning operations. Clear awareness of these geometric parameters simplifies tool selection and ensures repeatable results across different machines and setups. Controlled chip formation and secure mounting Chip control is provided by a one-sided chipbreaker tailored to the intended turning modes; this encourages predictable swarf behaviour and reduces the risk of re-cutting. The insert features a cylindrical hole with a single-sided countersink (40°–60°), compatible with standard clamping screws and clamping sets. For secure assembly and vibration-free performance, the complete system should include the matching shim/locking set and replacement screws; correct clamping maximises the benefit of the insert’s edge stability and coating. System benefits that improve workshop efficiency As part of an ISO insert system, the plate’s 2.38 mm thickness and size 06 designation enable straightforward stock keeping and fast replacements. The combination of indexable insert technology, robust PVD coating and considered geometry reduces total tool change time and supports continuous operation across external and internal turning tasks. Integration into a planned tooling system thus helps sustain machine uptime and supports cost-effective production planning without compromising on machining quality. For application advice or to request the CPMT060202 AH8015 insert from Metav Werkzeuge, please contact Metav Werkzeuge for tailored recommendations and availability. 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 Technical data Article number: 6951149 Manufacturer SKU: TUN6951149 SKU: 6951149-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: AH8015 (PVD-coated) Facts Corner radius: 0.2 mm Relief angle: 11° Included angle: 80° Thickness: 2.38 mm Size: 06 Special features Rhombic plate form One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) ISO-standard CPMT060202 designation Intended application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CPMT060202 AH8015 Tungaloy insert is designed primarily for heat-resistant alloys, with the AH8015 grade offering a balanced combination of wear resistance and edge stability for demanding materials. Is the insert compatible with standard ISO holders? Compatibility depends on matching the form, 11° relief, tolerance class, fastening style, size and thickness; when these parameters align, the insert integrates with standard external holders and boring bars. What benefit does the PVD coating provide? The PVD coating used on the AH8015 grade improves surface hardness at elevated temperatures and enhances wear resistance, helping to extend effective cutting life and maintain edge integrity during continuous operation. How does the chipbreaker influence machining? The one-sided chipbreaker controls swarf formation and evacuation, leading to more predictable chips and reduced risk of re-cutting, which supports a more stable machining process and consistent part quality. Which system components are required for secure clamping? For secure and vibration-free operation, the system should include a matching external holder or boring bar, the appropriate shim/locking set and the correct fastening screws compatible with the insert’s cylindrical hole and countersink Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 GH730 Wendeplatten - Tungaloy
Reliable production with GH730 wear resistance and a 0.2 mm corner radius ensures consistent turning performance; order the CPMT060202 GH730 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT060202 GH730 ISO rhombic turning insert by Tungaloy, 80° specification CPMT060202 GH730 is an ISO‑format, rhombic indexable insert designed for general turning where a balance of wear resistance and edge stability is required ISO‑compliant rhombic geometry GH730 grade for wear resistance Cylindrical hole with countersink 0.2 mm corner radius for fine finishes Increased process reliability through material and grade selection The combination of a Tungaloy carbide grade and the GH730 specification delivers a robust compromise between wear resistance and toughness. This balance reduces unexpected edge chipping during interrupted cuts and extends tool life in serial operations, which supports predictable cycle times and lower tool consumption. By choosing a grade matched to the machining task, the insert contributes to fewer tool changes and more stable production rhythms, helping to improve overall efficiency on turning centres and lathes. Precision geometry for secure clamping and repeatable results The rhombic ISO form with an 80° approach angle and 11° relief ensures consistent chip formation and controllable cutting forces. The insert’s 0.2 mm corner radius and 2.38 mm thickness are optimised for medium to fine finishing passes, delivering improved surface quality without sacrificing edge strength. The cylindrical hole with a one‑sided countersink (40°–60°) guarantees reliable seating and repeatable clamping, reducing variability between indexings and enabling precise reproducibility across multiple toolholders and assemblies. Practical application guidance and selection advice Designed specifically for turning, the insert is supplied with a one‑sided chipbreaker to assist controlled chip flow in many standard operations. Selection of the correct chipbreaker and the GH730 grade should be aligned with workpiece stability, machinability and cutting parameters to unlock the best combination of surface finish and tool life. For situations with limited rigidity or heavy interruptions, consider an insert geometry and holder combination that increases edge support; for high‑speed finishing the GH730 grade supports reliable cutting performance with consistent results. For tailored advice on compatibility, clamping options and fast supply of Tungaloy GH730 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss ordering the CPMT060202 GH730 and suitable holder combinations. Technical data Article number: 6820973 Manufacturer SKU: TUN6820973 Model series: ISO turning indexable inserts Designation: CPMT060202 Material: carbide Core dimensions Insert size: 06 Thickness: 2.38 mm Approach angle: 80° Relief angle: 11° Corner radius: 0.2 mm Countersink angle: 40°–60° Features & compatibility Rhombic plate form With hole; cylindrical hole + one‑sided countersink One‑sided chipbreaker Grade: GH730 (Tungaloy) Application: turning ISO‑standard insert — compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert intended for? The CPMT060202 GH730 Tungaloy insert is engineered for turning operations; the GH730 grade provides a balance of wear resistance and toughness suitable for a broad range of common turning tasks. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius on this insert helps produce finer surface finishes while maintaining edge strength, making it suitable for semi‑finishing and finishing passes. Can this insert be used with any holder? Compatibility relies on matching the ISO form, relief angle, tolerance class, clamping method, size and thickness; ensure the holder accepts a CPMT‑format, 06‑size rhombic insert with the specified hole and thickness. What advantage does the cylindrical hole with countersink provide? The cylindrical hole with a one‑sided countersink secures the insert reliably in the pocket, improving seating accuracy and repeatability during indexing. Is the GH730 grade suitable for interrupted cuts? The GH730 grade combines wear resistance with sufficient toughness to handle many interrupted cut scenarios with reduced risk of edge chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 060202 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the NS9530 cermet cutting grade, a sharp cutting edge for excellent surface finish and ISO-compliant geometry to ensure smooth turning cycles; order the CPMT 060202 NS9530 insert directly via Metav Werkzeuge or consult our technical team for compatibility advice. CPMT 060202 NS9530 turning insert, uncoated cermet – Tungaloy The CPMT 060202 NS9530 is an ISO-format indexable insert for external and internal turning, designed for fine finishing of steel with low cutting forces and high surface quality. ISO-compliant rhombic geometry Uncoated cermet grade NS9530 Sharp cutting edge for fine surface quality Compatible with cylindrical hole and 40°–60° countersink Precision finishing for steel components with lower cutting forces The insert is engineered as a finishing grade for steel, combining a sharp cutting edge with a low cutting-force profile to deliver consistently high surface quality on continuous cuts and small depths of cut. The uncoated cermet composition of grade NS9530 offers a finely honed edge that reduces deformation on the workpiece and helps achieve tighter tolerances during finishing passes. For operations where surface integrity and minimal burr formation are priorities, this geometry and grade provide a measurable improvement in cycle-to-cycle consistency. Secure toolholder compatibility and predictable clamping Compatibility with toolholders depends on the insert’s form, relief geometry, tolerance class, fastening method, size and thickness; the ISO format simplifies matching to standard holders. The rhombic 06 size with 2.38 mm thickness and a cylindrical hole with one-sided countersink (40°–60°) accommodates common clamping systems while maintaining repeatable seating. A defined 11° relief reduces flank contact and heat build-up, extending edge life and ensuring that the insert seats correctly in the pocket under load. Select holders rated for ISO turning inserts of this form to ensure stable cutting conditions. Small corner radius and chip control for finishing passes With a corner radius of 0.2 mm, the insert balances feed sensitivity and surface finish, enabling low-feed finishing cuts without introducing chatter or excessive tool marks. The single-sided chipbreaker design supports controlled chip formation during small depths of cut, improving evacuation in continuous cutting and reducing the risk of re-cutting. These attributes make the grade particularly suitable for operations where repeatable finish quality and predictable tool behaviour take precedence over aggressive metal removal rates. Operational benefits and application guidance The ISO-series design and NS9530 formulation are best applied to external and internal turning where continuous cutting and small depth passes are routine. The sharp cermet edge and geometry result in lower cutting forces, which can permit higher spindle speeds in finishing operations and reduce strain on thin-walled components. When replacing inserts, check the tolerance class and seating condition of the holder and use the specified clamping screw and underlay to maintain consistent performance across tool changes. For availability, compatibility checks or application advice on the Tungaloy CPMT 060202 NS9530 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998452 SKU: 6998452-Tungaloy Manufacturer SKU: TUN6998452 Model series: ISO turning inserts Facts ISO designation: 060202 Size: 06 Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 80° Special features Grade: NS9530 (uncoated cermet) Geometry: rhombic Hole: with cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: single-sided Intended application: external and internal turning; finishing on steel Compatibility notes: fit determined by form, relief, tolerance, fastening, size and thickness Benefit highlights: sharp edge, low cutting forces, high surface quality FAQ What materials is this insert suited for? The CPMT 060202 NS9530 insert is formulated as a finishing grade for steel and is optimised for continuous cuts and small depths where a fine surface finish is required. How does the 0.2 mm corner radius affect machining? A corner radius of 0.2 mm provides a compromise between feed sensitivity and surface finish, allowing very fine finishing feeds while limiting the risk of chatter on light cuts when using the CPMT 060202 NS9530. Which holders are compatible with this ISO insert? Compatibility is determined by the insert’s ISO form, relief angle, tolerance class, fastening type, size and thickness; use holders specified for ISO rhombic 06 inserts and ensure correct clamping hardware is used for reliable seating. What advantage does the uncoated cermet grade offer? The uncoated cermet NS9530 gives a sharp, wear-resistant edge that improves surface quality and reduces cutting forces during finishing, making it ideal for tight-tolerance steel turning. Is the insert suitable for internal turning as well as external turning? Yes. The ISO-format rhombic geometry and hole style make the insert suitable for both external and internal turning operations where finishing performance is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a finishing-grade NS9530 substrate, a 0.2 mm corner radius and ISO compatibility to achieve consistent surface quality and low cutting forces in turning operations; order the CPMT060202 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 060202 NS9530 — Indexable turning insert for finishing (Tungaloy) The CPMT060202 NS9530 Tungaloy insert is an ISO-format indexable insert optimised for finishing turns in steel, offering a sharp uncoated cermet edge and a compact 0.2 mm corner radius. Finishing grade NS9530 for steel Uncoated cermet for sharp cutting edge Rhombic 80° geometry for versatile turning Single-sided chipbreaker for continuous cuts Consistent finishing with low cutting forces The combination of the NS9530 grade and an uncoated cermet substrate delivers a very sharp cutting edge that reduces cutting forces and improves surface texture on steel components. This finishing grade is especially suitable for continuous cuts and small depths of cut, where minimising burrs and rework is critical. Lower cutting forces translate into reduced spindle load and steadier machining, which helps maintain reproducible tolerances on turned parts. Stable geometry for repeatable clamping and form control The rhombic 80° geometry, together with the insert’s 11° clearance angle and a corner radius of 0.2 mm, provides a predictable cutting profile for external and internal turning. The insert is supplied with a hole and a cylindrical hole plus single-sided countersink (40°–60°) to ensure secure clamping in compatible holders. Compatibility is determined by holder form, free clearance, tolerance class, fastening method, size and thickness; selecting the correct holder and clamping set ensures repeatable seating and consistent component quality. Practical integration into production workflows This ISO-format insert is part of a modular system that comprises the insert, an appropriate external holder or boring bar, backing pad/clamping set and spare screws. Selecting the single-sided chipbreaker and the NS9530 finishing grade reduces surface defects and the need for downstream finishing steps, supporting shorter cycle times and improved cost efficiency per part. For high-volume finishing, this insert offers a balance between form control and process stability that helps streamline routine turning operations. Key technical concepts explained for fast decision-making The ISO code 060202 relates to the standardised insert size and geometry; here, the size designation corresponds to a size 06 insert and the last digits indicate the nominal corner radius of 0.2 mm. Cermet is a ceramic–metal composite that combines the wear resistance of ceramics with metal-like toughness; in an uncoated form it produces a very sharp edge suited to fine finishes. The chipbreaker controls chip flow and is matched to the grade, material and cutting conditions to avoid long, stringy chips during continuous cutting. For high-quality finishing on steel components, choose the CPMT060202 NS9530 from Tungaloy — contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951150 Manufacturer SKU: TUN6951150 SKU: 6951150-Tungaloy Model series: ISO turning inserts Insert designation: CPMT060202 Grade: NS9530 Substrate/coating: uncoated cermet Application: Turning Shape: rhombic, 80° included angle Corner radius: 0.2 mm Clearance angle: 11° Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Thickness: 2.38 mm Core specifications Size code: 06 ISO code: 060202 Thickness: 2.38 mm Corner radius: 0.2 mm Included angle: 80° Clearance angle: 11° Countersink angle: 40°–60° Manufacturer article number: 6951150 Special features Finishing-grade NS9530 for low cutting forces Uncoated cermet for a sharp, durable edge Single-sided chipbreaker for continuous cuts Compatible with ISO-standard holders and clamping sets Suitable for external and internal turning operations FAQ What materials is this insert suited for? The CPMT060202 NS9530 is a finishing-grade insert optimised for machining steel; the NS9530 grade and uncoated cermet substrate deliver a fine surface finish on continuous cuts. How does the 0.2 mm corner radius affect results? A 0.2 mm corner radius provides a fine cutting profile that improves surface quality and reduces the need for secondary finishing when using the CPMT060202 insert in light finishing passes. Is the insert indexable on both sides? The insert form and single-sided chipbreaker are designed for stable clamping and indexing according to the ISO geometry; refer to holder compatibility for permitted index positions with this Tungaloy insert. What role does the chipbreaker play in machining? The single-sided chipbreaker controls chip formation during continuous cuts, promoting predictable chip flow and reducing the risk of long, tangled chips in finishing operations. Which holder characteristics are required for proper compatibility? Compatibility depends on holder form, free clearance, tolerance class, fastening method, size and thickness; selecting the correct external holder or boring bar and the matching backing/clamping set ensures repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet cutting edge (NS9530), a 0.2 mm corner radius and ISO compatibility for consistent finishing results; ideal for continuous cuts and small depths of cut. Order the CPMT060202 NS9530 insert directly via Metav Werkzeuge or ask our consultants for application advice. CPMT 060202 NS9530 CPMT turning insert — uncoated cermet, 0.2 mm radius — Tungaloy CPMT060202 NS9530 is an ISO‑standard turning insert designed for finishing operations on steel where a fine surface and low cutting forces are required Finishing grade NS9530 for steel Sharp edge reduces cutting forces ISO‑standard CPMT 060202 compatibility Rhombic 80° form, 0.2 mm corner radius Achieve superior surface finish with an uncoated cermet grade The insert is manufactured as an uncoated cermet cutting grade (NS9530) that delivers a fine edge optimised for finishing passes on steel. The combination of a sharp cutting edge and low cutting forces reduces workpiece deformation during light‑depth turning, resulting in improved surface finish and reduced rework. For manufacturers focused on repeatable part quality, this grade is particularly suitable for continuous cutting conditions and small depths of cut, where stability and edge integrity are decisive. Dependable ISO fit and quick toolholder selection Designed to the ISO CPMT form, the plate ensures predictable mechanical fit with compatible holders; compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness. The rhombic plate form with an included angle of 80° and a relief angle of 11° provides versatility for both external and internal turning applications. Using standardised inserts simplifies inventory and changeover, enabling faster tool changes and consistent machining set‑ups across machines and shifts. Efficient chip control and process stability for production environments The insert features a one‑sided chipbreaker and a cylindrical hole with a single‑side countersink (40°–60°) to support secure clamping and predictable chip formation. The 0.2 mm corner radius balances edge strength with the capacity to produce sharp profiles and tight tolerances. In practice, this means fewer interruptions for tool adjustment, steady cycle times and improved throughput on series production. The combination of chip control and the NS9530 material chemistry promotes stable cutting performance in finishing scenarios. For precision finishing on steel with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for immediate availability and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951190 SKU: 6951190-Tungaloy Manufacturer SKU: TUN6951190 Model series: ISO‑Drehwendeschneidplatten Designation: CPMT060202 NS9530 Data Size: 06 Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief/clearance angle: 11° Included angle: 80° Hole: with hole Special features Rhombic plate form Cylindrical hole + single‑side countersink (40°–60°) One‑sided chipbreaker Uncoated cermet grade NS9530 Optimised for finishing steel, continuous cuts and small depths of cut ISO‑standard turning insert; compatibility depends on holder form, tolerance and fastening FAQ What applications is this insert designed for? The CPMT060202 NS9530 Tungaloy turning insert is intended for external and internal turning, primarily as a finishing grade for steel where low cutting forces and high surface quality are required. Which toolholders are compatible with the CPMT060202 form? Compatibility follows ISO CPMT standards; the matching holder must correspond to the plate form, clearance angle (11°), tolerance class, fastening and thickness (2.38 mm) to ensure proper fit and clamping. How does the NS9530 grade affect machining performance? NS9530 is an uncoated cermet finishing grade that provides a sharp cutting edge and reduced cutting forces, improving surface finish and supporting continuous machining with small depths of cut. Can the insert handle interrupted cuts or hard materials? The CPMT060202 NS9530 is optimised for continuous finishing cuts on steel; for heavily interrupted cutting or hardened materials, alternative grades and geometries should be considered. What is the benefit of the 0.2 mm corner radius? A 0.2 mm corner radius offers a compromise between edge sharpness and strength, enabling precise profiles and improved surface quality while retaining adequate edge stability for finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060202 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide longevity, precise CPMT geometry and ISO compatibility for consistent stainless-steel turning results; order directly via Metav Werkzeuge or consult our advisors for application support. CPMT 060202 T6215 indexable turning insert — CVD-coated carbide for turning — Tungaloy The CPMT060202 T6215 is an ISO-indexed turning insert engineered for stable to slightly interrupted turning of stainless steels, offering high wear resistance and repeatable edge life. CPMT 060202 geometry, 80° cutting edge CVD-coated carbide T6215 for stainless steels 0.2 mm corner radius for consistent finish Compatible with ISO turning holders, central hole Engineered for durable stainless-steel turning performance The CVD-coated carbide grade provides increased wear resistance in demanding environments, extending productive cutting periods before index change is required. The T6215 grade is intended for machining stainless steels under stable to slightly interrupted conditions; the chemical vapour deposition layer reduces crater wear and preserves the cutting edge at elevated temperatures. By selecting a CVD-coated option rather than an uncoated substrate, machining cycles can run longer with fewer unscheduled tool changes, improving plant uptime and lowering overall tool cost per component. Geometry that secures surface finish and dimensional accuracy A purposeful combination of an 80° included angle with an 11° relief angle and a 0.2 mm corner radius delivers balanced strength and fine finish capability. The rhombic plate form and single-sided chipbreaker guide chip flow for predictable swarf behaviour, while the central hole with single-side countersink ensures stable clamping. These geometric choices reduce vibration and support repeatable part tolerances; the modest corner radius helps preserve profile integrity on tool life cycles, resulting in fewer rework operations and superior first-pass quality. System compatibility and practical benefits for production Belonging to an ISO insert family, the plate is compatible where holder form, clearance angle, tolerance class, fastening, size and thickness match; the cutting system typically comprises the insert, a matching external holder or boring bar, a backing shim/clamping set and replacement screws. The plate thickness of 2.38 mm and standard 06 size make it suitable for many common external and internal turning setups. Choosing an ISO-indexed insert simplifies inventory management and reduces machine downtime because replacements are interchangeable across standard holders that accept the 060202 geometry. Contact Metav Werkzeuge for tailored advice on Tungaloy turning solutions and to discuss the CPMT060202 T6215 for optimised stainless-steel machining — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951146 Manufacturer SKU: TUN6951146 SKU: 6951146-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CPMT060202 Facts Corner radius: 0.2 mm Insert thickness: 2.38 mm Included angle: 80° Relief angle: 11° Plate size: 06 Special features Material: Hartmetall Grade/sort: T6215 Coating: CVD-coated carbide Chipbreaker: single-sided Hole: cylindrical hole + single-side countersink (40°–60°) Shape: rhombic Application: Turning FAQ What materials is this insert suitable for? The CPMT060202 T6215 insert, a CVD-coated carbide grade from Tungaloy, is designed primarily for machining stainless steels under stable to slightly interrupted cutting conditions. How does the coating benefit machining performance? The CVD-coated carbide on the T6215 grade improves wear resistance and reduces crater wear at elevated temperatures, resulting in longer edge life and more consistent surface quality when using the CPMT060202 insert. Which holders accept this insert? Holders that match the ISO 060202 geometry, correct clearance angle and thickness accept the plate; the system requires a compatible external holder or boring bar plus the appropriate shim and clamping hardware for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com