CPMT 060204 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of wear‑resistant GT9530 cermet and a precise 0.4 mm nose radius for consistent finishing and extended tool life in stable turning operations. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. CPMT 060204 GT9530 — ISO turning insert for turning, Tungaloy, coated cermet, 11° clearance The CPMT 060204 GT9530 is an ISO rhombic turning insert designed for external and internal turning, offering a wear‑resistant coated cermet grade for longer finishing cycles. Coated cermet GT9530 for longer life 80° rhombic form for versatile turning 0.4 mm nose radius for fine surface finish Consistent finishing from a wear‑resistant cermet grade The coated GT9530 cermet is formulated for wear resistance and finer surface qualities during finishing and light universal turning of steel. Under stable machining conditions the coating reduces flank wear and helps maintain a predictable cutting edge, which translates to fewer tool changes and more consistent part quality. The modest 0.4 mm radius supports improved surface finish while retaining sufficient edge strength for controlled finishing passes. Secure mounting and ISO compatibility that reduces setup risk Compatibility with the toolholder is governed by the insert’s form, clearance angle, tolerance class, attachment and thickness. The rhombic 80° form and 11° clearance angle are ISO‑conforming, enabling straightforward selection of matching ISO external holders or boring bars. Clear specification of these parameters reduces set‑up time and the risk of incorrect seating, so machining runs remain stable and repeatable with predictable results. Efficient chip control and predictable tool life for production workflows The one‑sided chipbreaker and the insert’s coated cermet substrate support controlled chip formation in finishing operations, lowering the likelihood of built‑up edge and improving surface integrity. Predictable chip behaviour simplifies coolant and feed choices and makes process planning more reliable. Overall, this combination of features is aimed at maximising uptime and delivering a consistent surface finish across batches, which benefits both small series and serial production. Contact Metav Werkzeuge for application advice and to order Tungaloy GT9530 turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998311 SKU: 6998311-Tungaloy Manufacturer SKU: TUN6998311 Model series: ISO‑Drehwendeschneidplatten Manufacturer article number: 6998311 Facts Size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Cutting angle: 80° Clearance angle: 11° Countersink angle: 40°–60° Special features Coating / grade: GT9530 (coated cermet) Chipbreaker: one‑sided Hole: cylindrical with single‑side countersink (40°–60°) Insert shape: rhombic (CPMT) Application: turning (external and internal) Compatibility: ISO holders — fit depends on form, clearance, tolerance, attachment, size and thickness FAQ Which materials is this insert primarily intended for? The GT9530 grade is tailored for machining steel in finishing to light universal applications; the CPMT 060204 insert from Tungaloy and SKU 6998311‑Tungaloy is optimised for consistent surface quality under stable cutting conditions. What effect does the 0.4 mm nose radius have on the machined surface? A 0.4 mm nose radius provides a balance between edge strength and a fine surface finish; it reduces scallop height compared with smaller radii and helps achieve a better finishing result with predictable tool wear when using the GT9530 coating. How is holder compatibility ensured for this ISO insert? Compatibility depends on insert form, clearance angle, tolerance class, attachment, size and thickness; specifying the ISO designation (CPMT 060204), the 11° clearance and 2.38 mm thickness ensures a correct match with an ISO‑compliant external holder or boring bar. Can this insert be used for both external and internal turning? Yes — the rhombic 80° form and the one‑sided chipbreaker make the insert suitable for both external and internal turning operations where finishing and longer edge life are required. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 060204 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a wear-resistant GT9530 cermet grade and the ISO CPMT 060204 format for consistent finishing results; the 0.4 mm nose radius and single-sided chipbreaker support excellent surface quality under stable cutting conditions. Order through Metav Werkzeuge or consult our specialists for application advice. CPMT 060204 GT9530 turning insert — ISO CPMT 060204, coated cermet by Tungaloy CPMT 060204 is a coated cermet turning insert designed for finishing and light universal turning of steel components Coated cermet grade GT9530 ISO CPMT 060204 rhombic insert 0.4 mm nose radius for fine finishing Cylindrical hole with single-sided countersink Consistent surface quality and longer tool life The coated cermet grade GT9530 is formulated for wear resistance and reliable finishing performance on steel in stable setups. The composition prioritises a fine-grain surface and extended edge life, which reduces the frequency of insert changes and supports uninterrupted production runs. Cermet differs from conventional carbide by offering improved hot hardness and reduced built-up edge tendency, so a finely honed cutting edge delivers a better surface finish and predictable tool wear under light to medium engagement. This makes the insert particularly suitable where consistent component finish and repeatability are required. Precision fit and ISO compatibility for fast integration Delivered in the ISO CPMT 060204 format, the insert matches established holder geometries and clamping systems; compatibility depends on form, relief angle, tolerance class, fixation and thickness. The rhombic shape with an included angle of 80°, a relief angle of 11°, and a plate thickness of 2.38 mm ensure stable seating and repeatable indexing. The 0.4 mm nose radius provides a balance between edge strength and finishing capability. Specifying an ISO-standard insert simplifies stocking and enables rapid replacement in existing toolholders, improving uptime and process reliability. Application guidance and recommended system configuration For practical system setup, combine the insert with a suitable external holder or boring bar, a matching shim or clamp set, and the correct mounting screw. The single-sided chipbreaker is tailored for finishing to light universal cuts; choose a breaker and grade that suit the workpiece material and machining stability. The insert’s cylindrical hole with a one-sided countersink (40°–60°) secures accurate clamping and axial location. For uncertain fits or to optimise cutting parameters for throughput and surface quality, consult Metav Werkzeuge’s technical team by email or phone for tailored recommendations. Contact Metav Werkzeuge for precise application advice and availability — Metav Werkzeuge can support toolholder compatibility checks and cutting-parameter recommendations Technical data Article number: 6998316 SKU: 6998316-Tungaloy Manufacturer SKU: TUN6998316 Designation: CPMT060204 GT9530 Key measurements Size code: 06 Nose radius: 0.4 mm Plate thickness: 2.38 mm Relief angle: 11° Included angle: 80° Manufacturer article number: 6998316 Features and applications Coated cermet grade GT9530 Carbide substrate (Hartmetall) Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Application: Turning Model series: ISO turning indexable inserts FAQ What materials is this insert suited for? The CPMT 060204 GT9530 insert is intended primarily for turning steel in finishing to light universal operations; the GT9530 grade emphasises surface quality and wear resistance. How does the GT9530 cermet differ from standard carbide grades? GT9530 is a coated cermet focused on improved hot hardness and reduced built-up edge compared with many standard carbide grades, delivering finer finishes and extended edge life in stable conditions. Which holder features are required for correct compatibility? Compatibility is determined by the insert form, relief angle, tolerance class, fixation method, size and thickness; ensure the holder accepts ISO CPMT 060204 inserts and provides correct clamping to engage the cylindrical hole and countersink. Can this insert be used for roughing operations? The CPMT 060204 GT9530 is optimised for finishing and light universal turning; for heavy roughing a more robust grade and a different chipbreaker geometry are recommended. What is the advantage of the single-sided chipbreaker and the countersunk hole? The single-sided chipbreaker supports controlled chip formation in finishing cuts, while the cylindrical hole with one-sided countersink ensures secure axial location and stable clamping for repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 NS9530 Wendeplatten - Tungaloy
A finishing‑grade, ISO‑standard turning insert with an uncoated cermet (NS9530) cutting material and a sharp cutting edge provides low cutting forces and consistently high surface quality; its rhombic CPMT geometry and central hole ensure secure clamping with standard holders. Order the item directly via Metav Werkzeuge or consult our advisors for process optimisation. CPMT060204 NS9530 Tungaloy indexable turning insert — rhombic ISO insert for finishing in turning The CPMT060204 NS9530 is an ISO‑standard rhombic turning insert designed for finishing steel, combining a sharp edge with low cutting forces for continuous cuts and fine surface results. ISO rhombic insert CPMT060204 for standard holders Uncoated cermet NS9530 for fine finishing Low cutting forces, excellent surface finish Central hole with 40°–60° countersink for secure clamping Finishing performance with low cutting forces The rhombic CPMT geometry and the uncoated cermet NS9530 grade are optimised for finishing operations in steel, where a sharp cutting edge and minimal cutting resistance matter. As a finishing grade, the insert produces a high surface finish at small depths of cut and during continuous cutting. The 0.4 mm radius contributes to consistent edge strength while maintaining a fine profile on the workpiece; the result is reduced rework and improved part consistency. Reliable compatibility and secure clamping Manufactured to ISO dimensions, the insert suits standard external and internal turning holders when matched by form, relief angle, tolerance class, fixing method, size and thickness. The central cylindrical hole with a single‑side countersink (40°–60°) ensures repeatable positioning and secure clamping in the cutter body. Together with the 11° relief angle and 80° approach angle, the geometry supports stable engagement, reduced vibration and predictable cutting behaviour in typical turning setups. Practical benefits for workshop productivity Made of robust carbide with a finishing cermet topography, this indexable plate is designed for steady, low‑force machining that maximises tool life under light, continuous cuts. The 2.38 mm thickness and rhombic form offer reliable indexability and straightforward corner indexing to extend service intervals. For manufacturers aiming to improve surface quality while keeping cycle times and tool handling simple, this solution supports efficient process control and reproducible results. For technical advice on deploying the Tungaloy NS9530 finishing insert or to order through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability Technical data Article number: 6998447-Tungaloy Manufacturer item number: 6998447 Manufacturer SKU: TUN6998447 ISO designation: CPMT060204 Numbers / Facts Size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Approach angle: 80° Special features / Versions Material: carbide (cermet topography) Grade: NS9530 (uncoated cermet, finishing) Plate form: rhombic Hole: cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: one‑sided Application: turning (external and internal), finishing steel Series: ISO indexable turning inserts (ISO‑standard plates) FAQ What materials is this insert intended for? This insert is a finishing grade in NS9530 and is intended primarily for finishing steel in turning applications where low cutting forces and a fine surface finish are required. How does the hole and countersink affect clamping stability? The cylindrical hole with a single‑side 40°–60° countersink on the CPMT060204 provides secure, repeatable seating and optimised clamping in compatible ISO holders, improving positional accuracy and resistance to rotation. Can this insert be used for heavy roughing passes? The NS9530 finishing grade and the CPMT geometry are optimised for fine, continuous cuts and small depths of cut rather than heavy roughing; for roughing operations a different grade and chipbreaker would be recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 NS9530 Wendeplatten - Tungaloy
Benefit from a focused finishing solution that combines the NS9530 uncoated cermet grade with a precise 0.4 mm nose radius and an 11° clearance angle for consistently high surface quality and low cutting forces; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CPMT060204 NS9530 Tungaloy indexable insert — Turning, finishing grade CPMT060204 NS9530 is a rhombic ISO indexable insert designed for precision external and internal turning, offering a sharp cutting edge and low cutting forces for outstanding surface finish. Rhombic ISO insert CPMT 060204 Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing Cylindrical hole with countersink 40°–60° High-precision finishing for steel turning The CPMT060204 NS9530 insert targets finishing operations on steel, delivering a combination of edge sharpness and wear resistance characteristic of uncoated cermet materials. Its geometry and grade are optimised for continuous cuts and small depths of cut, which reduces cutting forces and helps achieve a superior surface finish. In practice, this translates into fewer rework steps and more consistent part quality when fine tolerances and mirror-like surfaces are required. Secure clamping and compatibility with ISO holders Compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness; the insert's 11° clearance and rhombic form ensure reliable seating in standard ISO external holders or boring bars. The central cylindrical hole with one-sided countersink (40°–60°) provides positive clamping and repeatable positioning. These characteristics reduce vibration and improve process stability, which is particularly important for high-precision turning operations. Optimised for continuous cutting and surface quality With a single-sided chipbreaker and a finely honed cutting edge, this grade is intended as a finishing option for steel where low cutting forces and top-quality finishes are priorities. The modest 0.4 mm nose radius balances edge strength and detail, enabling tight corner radii and consistent profile accuracy. Selecting an appropriate chipbreaker and grade matching material and machine stability will secure consistent chip control and minimise the risk of built-up edge during light finishing passes. Integrating the insert into production workflows The system comprises the ISO indexable insert together with a matching external holder or boring bar, a shim/clamp set and replacement screws, making retrofits straightforward. The rhombic form and standard ISO designation ease inventory management and reduce setup time across multiple machines. For process planning, treat this insert as a finishing solution: pair it with stable tooling, reduced feeds and small depths of cut to unlock the full potential of the NS9530 cermet grade while maintaining predictable tool life. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Tungaloy CPMT060204 NS9530 indexable insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for practical guidance and order processing Technical data Manufacturer article number: 6998453 SKU: 6998453-Tungaloy Manufacturer SKU: TUN6998453 Model series: ISO indexable turning inserts Article name: CPMT060204 NS9530 Tungaloy insert Core technical values Size: 06 ISO code: 060204 Included angle: 80° Clearance angle: 11° Plate thickness: 2.38 mm Corner radius: 0.4 mm Special features Material: cemented carbide insert intended as uncoated cermet Grade: NS9530 for finishing steel Shape: rhombic indexable insert Chipbreaker: single-sided Hole: cylindrical with one-sided countersink (40°–60°) Application: external and internal turning System components: insert, matching holder/boring bar, shim/clamp set, replacement screws FAQ What applications is this insert best suited for? The insert is intended for finishing in external and internal turning operations; select the NS9530 uncoated cermet grade and the appropriate chipbreaker for continuous cuts and fine surface requirements. How is compatibility with a holder determined? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s rhombic shape and 11° clearance support standard ISO holder interfaces. Can this insert handle interrupted cuts or heavy interrupted machining? This insert is a finishing grade optimised for continuous cuts and small depths of cut; for heavily interrupted or roughing tasks, a different geometry or grade should be selected. What does the hole and countersink design offer? The cylindrical hole with a one-sided countersink (40°–60°) ensures positive clamping and repeatable seating, improving stability and reducing the risk of insert movement during precision turning. Is the corner radius suitable for tight profiles? With a 0.4 mm corner radius, the insert provides a good compromise between edge strength and the ability to machine fine radii and detailed profiles in finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise rhombic geometry, a sharp uncoated cermet grade (NS9530) and a secure, countersunk clamping hole for efficient finishing on steel; order the insert directly via Metav Werkzeuge or consult the Metav team for application support. CPMT060204 NS9530 CPMT ISO turning insert for finishing (Tungaloy) The CPMT060204 NS9530 is an ISO-standard turning insert designed for finishing operations on steel, offering a sharp uncoated cermet grade for low cutting forces and a 0.4 mm corner radius suited to continuous cuts and small depths of cut Precision rhombic geometry, 80° included angle Sharp uncoated cermet grade NS9530 Single-sided chipbreaker for continuous cuts Countersunk cylindrical hole for secure clamping Optimised geometry for faster, predictable machining The rhombic 80° geometry with an integrated 0.4 mm corner radius delivers controlled cutting engagement and consistent edge performance. This profile reduces radial cutting forces, which in turn lowers vibration and improves tool life when paired with a stable setup. The combination of ISO-standard form and the specified relief angle ensures predictable behaviour in both external and internal turning operations, enabling higher machining efficiency with fewer interruptions. Fine finishing with an uncoated cermet grade The NS9530 grade is an uncoated cermet developed for finishing steel, providing a sharp cutting edge that produces superior surface quality while keeping cutting forces low. Cermet grades typically offer improved edge stability and thermal resistance at finishing conditions; this results in reliably good surface finishes and reduced need for secondary operations, making the insert a cost-effective choice for precision turning tasks. Secure seating and easy integration into ISO systems The insert features a cylindrical hole with a one-sided countersink (40°–60°), allowing secure clamping in compatible holders and boring bars. Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert integrates into a typical system comprising the ISO insert, matching external holder or boring bar, a seat/clamping set and replacement screws. This modular approach simplifies tool changeovers and supports repeatable set-ups across production runs. Practical selection guidance for consistent results For finishing with continuous cuts and small depths of cut, select the single-sided chipbreaker and the NS9530 grade to balance edge sharpness and chip control. When tool life or interrupted cuts become critical, consider a different chipbreaker or an alternative grade optimised for tougher conditions. Applying the right grade and chipbreaker reduces scrap, stabilises process windows and helps achieve the desired surface quality with minimum rework. For reliable finishing with Tungaloy's CPMT060204 NS9530 insert, contact Metav Werkzeuge for tailored application advice or order through Metav Werkzeuge — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6951196-Tungaloy Manufacturer article number: 6951196 Manufacturer SKU: TUN6951196 Model series: ISO turning indexable inserts Material/grade: NS9530 (uncoated cermet) Type designation: CPMT060204 Facts Plate size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 80° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic plate form (CPMT) Single-sided chipbreaker Designed for finishing on steel Compatibility determined by holder form, relief angle, tolerance class, fastening, size and thickness Suitable for external and internal turning in continuous cuts FAQ What machining tasks suit this insert best? The CPMT060204 NS9530 insert is optimised for finishing operations on steel, particularly continuous cuts and small depths of cut where a sharp uncoated cermet edge and low cutting forces are required. How does the NS9530 grade influence surface finish? The NS9530 uncoated cermet provides a sharp, stable cutting edge that minimises built-up edge and improves surface integrity, making the grade well suited for high-quality finishes. Which holders are compatible with this ISO insert? Compatibility depends on the holder's form, relief angle, tolerance class, fastening method, size and thickness; the CPMT060204 fits holders designed for ISO CPMT inserts and uses a countersunk cylindrical hole for secure clamping. Is the insert suitable for internal turning as well as external turning? Yes, the geometry and chipbreaker make the insert suitable for both external and internal turning when appropriate holder rigidity and tool overhang are observed. What are the key measurable specifications to check before ordering? Verify the plate size (06), thickness (2.38 mm), corner radius (0.4 mm), relief angle (11°) and hole style (cylindrical + countersink) to ensure proper fit and function. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 NS9530 Wendeplatten - Tungaloy
Taking advantage of the NS9530 finishing grade and the rhombic ISO 06 geometry, this insert delivers low cutting forces and a superior surface finish for continuous turning of steel. Order the matching Tungaloy insert and compatible holders through Metav Werkzeuge or consult our advisers for holder selection. CPMT 060204 NS9530 — ISO turning insert (finishing) by Tungaloy The CPMT060204 NS9530 is an ISO rhombic turning insert intended for finishing steel with a sharp cutting edge and consistent surface quality. Precision finishing grade NS9530 Sharp cutting edge for low cutting forces Rhombic ISO 06 shape, 0.4 mm corner radius Cylindrical hole with 40°–60° countersink High-efficiency finishing with a cermet grade built for low force cutting This indexable insert features an uncoated cermet cutting material in the NS9530 grade, developed for finishing operations on steel. The combination of a sharp cutting edge and the cermet substrate reduces friction and minimises cutting forces, which directly benefits cycle stability and tool life. For operations with continuous cutting and small depths of cut, the result is a noticeably improved surface finish and reduced need for secondary polishing, making the process both time- and cost-efficient. Geometry and clamping designed for predictable performance The insert follows the ISO rhombic format ISO 06 and carries a 0.4 mm corner radius, a 11° relief angle and 2.38 mm thickness, features that control cutting engagement and edge strength. The part is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to suit standard clamping systems. Compatibility with a holder depends on the insert form, relief angle, tolerance class, fastening type, nominal size and thickness; selecting an appropriate holder and tightening torque ensures repeatable results and secure clamping during turning. Application-focused benefits for workshop productivity Intended primarily for turning and specifically for finishing steel, the insert’s single-sided chipbreaker suits stable set-ups and steady feed conditions. The construction promotes stable chip formation and consistent performance across runs, which supports process reliability and predictable surface integrity. When combined with the correct external holder and cutting parameters, the insert contributes to shorter rework times and higher first-pass yield for precision components. Contact Metav Werkzeuge for tailored holder recommendations and to order Tungaloy CPMT060204 NS9530 inserts, or request technical advice to match the insert to the machining task. Technical data Article number: 6951169-Tungaloy Manufacturer article number: 6951169 Manufacturer SKU: TUN6951169 ISO designation: CPMT060204 NS9530 Shape: rhombic (ISO 06) Hole style: cylindrical hole with single-sided countersink (40°–60°) Core specifications Corner radius: 0.4 mm Relief angle: 11° Thickness: 2.38 mm Included angle: 80° Grade: NS9530 Materials & features Cutting material: uncoated cermet Intended application: finishing for steel Chipbreaker: single-sided Recommended for: continuous cuts and small depths of cut Mounting: compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The NS9530 grade is a finishing cermet developed for machining steel; the insert performs best in continuous turning and small depths of cut on steel workpieces. What is the exact ISO designation and size? The insert is designated CPMT060204 (ISO 06); it has a 0.4 mm corner radius and a thickness of 2.38 mm. Is the insert coated? No, this insert is an uncoated cermet grade (NS9530), optimised for finishing with a sharp edge and low cutting forces. How should the insert be matched to a holder? Compatibility is determined by the insert form, relief angle (11°), tolerance class, fastening method, nominal size and thickness; select a holder that matches these parameters for secure clamping and repeatable performance. What chip control does the insert provide? The part features a single-sided chipbreaker, suitable for stable setups and continuous cutting where chip control is required without aggressive interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T5115 Wendeplatten - Tungaloy
Durable CVD-coated carbide in grade T5115 provides balanced wear resistance and edge stability for consistent cast iron turning; with a 0.4 mm corner radius and 11° relief angle the insert supports reliable finishing and predictable tool life. Order genuine Tungaloy inserts via Metav Werkzeuge or consult our specialists for material- and operation-specific recommendations. CPMT 060204 T5115 ISO indexable turning insert, CVD-coated carbide by Tungaloy The CPMT060204 T5115 is an ISO-standard indexable turning insert for external and internal turning, optimised for machining cast iron and compatible with standard ISO holders. CVD-coated carbide T5115 for cast iron Rhombic insert, 80° shape Corner radius 0.4 mm for fine finishing One-sided chipbreaker with centre hole Consistent performance when machining cast iron The insert is manufactured from CVD-coated carbide in grade T5115, which combines wear resistance with a stable cutting edge. This balance reduces flank wear and preserves the geometry of the cutting edge over longer tool life, leading to fewer indexings and reduced downtime. For industrial turning operations on cast iron, the design helps maintain a repeatable surface finish and dimensional accuracy, which in turn supports downstream processes and part quality. Secure mounting and predictable compatibility Compatibility with the tool holder is governed by form, relief angle 11°, tolerance class, fastening method, size and thickness 2.38 mm. The insert features a cylindrical hole with a single-side countersink (40°–60°), enabling firm clamping in correctly matched holders. Describing the tool as an ISO-standard component ensures straightforward selection of matching shank holders, shims and clamping sets, so the system assembly—insert, holder, underlay and screws—delivers consistent clamping torque and repeatable positioning. Precision finishing and controlled chip flow A corner radius of 0.4 mm and a single-sided chipbreaker suit a combination of light roughing and finishing passes. The small radius supports fine surface quality and low cutting forces for delicate profiles, while the chipbreaker manages chip formation for stable cutting behaviour. When used for external and internal turning, the geometry assists vibration control and contributes to predictable tool wear, which helps planners set reliable cycle times and reduces the risk of scrap. Economical machining through material and geometry choice Selecting a T5115 grade insert with CVD coating provides a cost-effective compromise between longevity and edge robustness for a wide range of cast-iron applications. The rhombic shape and 80° cutting angle offer versatility across turning tasks, while the standardised format simplifies stock management. For best results, match the chipbreaker style and holder rigidity to workpiece stability and cutting parameters—this targeted selection enhances productivity and lowers total machining cost per part. Request a tailored quotation from Metav Werkzeuge for genuine Tungaloy CPMT060204 inserts or call +49 2822 7131930 / email info@metav-werkzeuge.com for application guidance and supply options Technical data Article number: 6864742 Manufacturer SKU: TUN6864742 SKU: 6864742-Tungaloy Designation: CPMT060204 Manufacturer: Tungaloy Facts Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Insert angle: 80° Size: 06 Countersink angle: 40°–60° Special features Rhombic plate form CVD-coated carbide, grade T5115 Universal grade for cast iron Single-sided chipbreaker Cylindrical hole with single-side countersink ISO-standard indexable turning insert Intended for external and internal turning System assembly: insert, holder, underlay/clamping set and spare screws FAQ What materials is this insert suitable for? The insert is specified as a universal grade for machining cast iron; the T5115 CVD-coated carbide grade delivers balanced wear resistance and edge stability for typical cast-iron applications. How is the insert mounted in the toolholder? Mounting requires an ISO-compatible holder that matches the insert form, relief angle and size; the CPMT design uses a cylindrical hole with a single-side countersink for secure clamping. Which operations are recommended for this insert? The geometry and chipbreaker make it suitable for both external and internal turning, with strengths in light roughing and finishing where edge stability and surface quality are priorities. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides finer surface quality and lower cutting forces, particularly useful for finishing passes and delicate profiles. Is the CPMT060204 compatible with all ISO holders? Compatibility depends on holder form, 11° relief angle, tolerance class, fastening method, size and thickness; selecting a correctly matched ISO holder ensures reproducible clamping and tool performance. Does the insert come with any coating and what is its benefit? The grade uses a CVD coating, which enhances wear resistance and protects the cutting edge, extending tool life under typical cast-iron cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide grade and ISO compatibility to deliver productive, wear‑resistant turning of stainless steels with controlled chip formation. Choose the CPMT060204 T6215 insert for consistent performance in stable to slightly interrupted cuts and contact Metav Werkzeuge for advice or ordering. CPMT 060204 T6215 – CPMT060204 Turning Insert for Turning, Tungaloy A CPMT060204 T6215 indexable turning insert designed for ISO‑standard external and internal turning, optimised for machining stainless steels under stable to slightly interrupted conditions and compatible with many ISO‑form holders. CVD‑coated carbide for extended tool life Designed for stainless steel turning Rhombic 80° geometry with 11° clearance Single‑sided chipbreaker for predictable chips Cylindrical hole with 40°–60° countersink Maximum wear resistance for longer production runs The CVD coating applied to this grade provides a durable, heat‑resistant surface that reduces flank and crater wear, which in turn extends service intervals and lowers tool costs per component. Because the substrate is carbide, edge stability is maintained at elevated cutting temperatures typical in the machining of stainless steels, allowing for reliable surface finish and repeatable results. The proven combination of coating and substrate supports stable machining in continuous and slightly interrupted cuts, improving overall process efficiency. Geometry and chip control that enhance machining quality The rhombic 80° shape paired with an 11° clearance angle and a 0.4 mm corner radius offers a balanced compromise between strength and cutting edge definition. The single‑sided chipbreaker shapes the chip flow to reduce built‑up edge and promote controlled evacuation, which benefits both turning and facing operations. As a result, cycle times remain consistent and the risk of unexpected tool failure is diminished; the insert’s form, tolerance class and thickness ensure compatibility with standard ISO clamping systems. Compatibility and practical application guidance Sold as an ISO‑conforming insert, the CPMT060204 T6215 fits holders and boring bars that match its form, size and fixing style; the cylindrical hole with a 40°–60° countersink secures the seat and aids repeatable indexing. Selection of the correct chipbreaker and grade should be matched to component material and machining stability: for heavy interrupted cuts a tougher grade is preferable, whereas this T6215 grade excels where wear resistance and surface quality are priorities. Technical parameters such as feed, depth of cut and cutting speed should be adapted to the workpiece and machine rigidity to exploit the insert’s strengths. Practical benefits for workshop productivity Reduced downtime through longer tool life and predictable chip formation translates directly to fewer tool changes and less scrap. The ISO compatibility simplifies inventory and replacement planning across different toolholders, while the insert’s geometry supports consistent surface finish and tight dimensional control in turning tasks. For shops focused on machining stainless steels where a balance of economy and performance is required, this insert provides a dependable option that integrates smoothly into existing tooling systems. Contact Metav Werkzeuge to discuss application requirements and receive tailored cutting data; technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6903093 SKU: 6903093-Tungaloy Manufacturer SKU: TUN6903093 Name: CPMT060204 T6215 Tungaloy insert Facts / Core technical data Corner radius: 0.4 mm Plate thickness: 2.38 mm Geometry angle: 80° Clearance angle: 11° Plate size: 06 Countersink angle: 40°–60° Special features / Versions Material: carbide Coating: CVD coating (grade T6215) Plate form: rhombic Chip control: single‑sided chipbreaker Hole: with cylindrical hole and one‑sided countersink Series: ISO turning inserts Application: turning (external and internal) Typical system: insert + holder/boring bar + shim/clamp + screw FAQ What materials is this insert suitable for? The CPMT060204 T6215 is specified for machining stainless steels and is optimised for wear resistance under stable to slightly interrupted cutting conditions. Which geometry and clearance does the insert offer? This insert features an 80° rhombic geometry with an 11° clearance angle and a 0.4 mm corner radius to balance edge strength and finish quality. How is the insert secured in the holder? The insert has a cylindrical hole with a 40°–60° countersink; it is intended for ISO‑compatible holders using the standard clamping and locating elements. Can the chipbreaker be changed for different operations? Different chipbreaker styles are available; the single‑sided chipbreaker on this grade provides predictable chip flow for many turning applications, while alternatives can be selected for heavy interruption or other demands. Where can cutting data and application advice be obtained? Application recommendations and cutting parameters for the T6215 grade can be provided by Metav Werkzeuge’s technical consultants to match machine, material and desired productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T6215 and ISO rhombic geometry for dependable stainless steel turning; reliable edge life and secure clamping reduce downtime. Order directly via Metav Werkzeuge or consult our specialists for application-specific setup. CPMT 060204 T6215 — Tungaloy indexable turning insert, CVD-coated carbide for stainless steel The CPMT 060204 T6215 is an ISO rhombic turning insert intended for external and internal turning of stainless steel under stable to slightly interrupted cutting conditions. CVD-coated grade T6215 for wear resistance Optimised for stainless steel turning ISO rhombic 80° geometry for secure seating Corner radius 0.4 mm with single-sided chipbreaker High wear resistance from CVD-coated carbide for stainless steels The CPMT060204 uses a CVD-coated carbide substrate in the T6215 grade, engineered for extended tool life when machining stainless steel. Chemical vapour deposition (CVD) applies a uniform hard coating that improves resistance to abrasive and adhesive wear, which commonly causes built-up edge with stainless alloys. The result is a more consistent edge condition over longer tool life, reduced frequency of index changes and fewer interruptions to production. For shops seeking predictable consumption and lower regrind intervals, this coating–substrate combination offers measurable improvements in process reliability. Precise geometry and clamping features that secure form and finish The insert’s ISO rhombic geometry with an 80° main cutting edge and a corner radius 0.4 mm delivers a balance between strength and accessibility in shoulder and profile turning. The plate includes a cylindrical hole with one-sided 40°–60° countersink, enabling reliable location and clamping with compatible holders. With a 2.38 mm thickness and 11° relief angle, the configuration supports stable seating and repeatable positioning; holder compatibility is determined by form, relief, tolerance class, fastening, size and thickness. The single-sided chipbreaker is optimised for stainless applications, improving chip control and reducing the risk of surface damage during continuous passes. Improve cycle times and surface quality with matched system components Used in a correctly matched tooling system — insert, external holder or boring bar, clamping pack and replacement screws — this indexable solution helps maintain steady metal removal rates while preserving surface integrity. The T6215 grade performs well under stable to slightly interrupted cuts, enabling higher cutting speeds than conventional grades when parameters are optimised. For production planning, this translates into fewer tool changes, consistent part quality and better overall process throughput. For specific feeds, speeds and holder recommendations, technical clarification is available from Metav Werkzeuge to align cutting data with machine capability and workpiece material. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy CPMT 060204 T6215 insert into production; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6951193 Manufacturer SKU: TUN6951193 SKU: 6951193-Tungaloy Model series: ISO turning indexable inserts Material: carbide Core technical data Corner radius: 0.4 mm Insert thickness: 2.38 mm Insert size: 06 Relief angle: 11° Main cutting edge angle: 80° ISO designation: 060204 Materials & special features Coating: CVD Grade: T6215 Substrate: carbide Application: turning (external and internal) Suitable material: stainless steel Chipformer: single-sided chipbreaker Plate shape: rhombic Hole: with cylindrical hole and one-sided countersink (40°–60°) Compatibility: holder match by form, relief, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The CPMT 060204 T6215 insert is optimised for machining stainless steel; the CVD-coated T6215 grade enhances wear resistance and reduces adhesion-related build-up when turning such alloys. What holder features are required for correct clamping? Compatibility depends on the holder matching the insert by form, relief, tolerance class, fastening, size and thickness; use a holder designed for ISO rhombic inserts with an 80° seating angle and the appropriate clamping kit. Can this insert handle interrupted cuts? The grade is specified for stable to slightly interrupted conditions; it provides good edge stability during minor interruptions but is not intended for heavy-impact interruption. How does the chipbreaker affect performance on stainless steel? The single-sided chipbreaker improves chip formation and evacuation for stainless materials, reducing the risk of surface damage and facilitating continuous metal removal. What are the key dimensional values to check before ordering? Verify the corner radius (0.4 mm), insert thickness (2.38 mm), insert size (06) and ISO designation (060204) to ensure compatibility with existing holders and process requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD coating, precise 0.4 mm corner radius, and ISO-standard geometry for reliable turning performance; order the CPMT060204 T6215 insert directly via Metav Werkzeuge or consult our advisors for application support. CPMT 060204 T6215 rhombic indexable insert for turning – Tungaloy The CPMT060204 T6215 is an ISO-standard rhombic indexable insert engineered for external and internal turning, optimised for machining stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide for wear resistance Optimised chipformer for stainless steel 11° clearance angle for stable cutting Rhombic 06 size, 0.4 mm corner radius Higher tool life through CVD-coated carbide technology The CVD-coated carbide grade T6215 delivers improved resistance to abrasive wear, making it particularly suitable for machining stainless steels where surface adhesion and work hardening can accelerate tool degradation. By combining a hard coating with a tough substrate, the insert maintains cutting-edge stability over longer cycles, which reduces the need for frequent index changes and supports more predictable production scheduling. This results in a measurable improvement in tool life and process economy for series turning operations. Accurate geometry for consistent clamping and repeatable results An ISO-compliant rhombic geometry with an included angle of 80°, a 0.4 mm corner radius and an 11° clearance angle helps ensure consistent contact with modern toolholders. The insert’s cylindrical hole with single-side countersink (40°–60°) facilitates secure fastening and repeatable seating in the pocket, while the standard 06 size and 2.38 mm thickness provide compatibility with a broad range of external and internal turning holders. Clear specification of form, free angle and tolerance class simplifies holder selection and reduces set-up time. Practical chip control and system-level benefits The single-sided chipbreaker design provides reliable chip formation when paired with appropriate cutting parameters and holder stability. In a typical system — insert, outer holder or boring bar, shim and clamp set — the matched geometry and coating reduce edge wear and support a stable cutting regime. Selecting the right chipformer and grade for the workpiece material and machining stability improves surface finish and lowers the likelihood of built-up edge formation, which benefits both throughput and downstream processes. For procurement or application advice on the Tungaloy CPMT060204 T6215 indexable insert, contact Metav Werkzeuge for availability and tailored recommendations — Metav Werkzeuge can assist with holder compatibility and cutting data. Technical data Article number: 6951161 Manufacturer SKU: TUN6951161 SKU: 6951161-Tungaloy Model series: ISO-turning indexable inserts Designation: CPMT060204 T6215 Tungaloy-indexable insert Facts Corner radius: 0.4 mm Thickness: 2.38 mm Clearance angle: 11° Included angle: 80° Size: 06 Special features Material: carbide Coating: CVD-coated Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning ISO designation: CPMT060204 Compatible system components: outer holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The CPMT060204 T6215 insert is formulated for machining stainless steels and similar alloys, where the CVD-coated carbide grade provides wear resistance under stable to lightly interrupted conditions. What are the key geometric specifications of the insert? The insert features a 0.4 mm corner radius, 2.38 mm thickness, 11° clearance angle and an 80° included angle; it is supplied in ISO size 06. How is the insert secured in the holder? Retention is achieved via the cylindrical hole with a one-sided countersink (40°–60°), designed for secure clamping and repeatable seating in compatible ISO tooling pockets. Is the CPMT060204 suitable for internal turning? Yes, the indexable insert is designed for both external and internal turning applications when mounted in an appropriate boring bar or holder. When should the single-sided chipformer be chosen? The single-sided chipformer is recommended for operations requiring controlled chip flow in medium to stable cutting conditions; matching the chipbreaker to material and rigidity enhances surface finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T6215 Wendeplatten - Tungaloy
Robust CVD-coated carbide and a precise rhombic geometry combine to deliver stable chip control and extended tool life; ideal for turning rostfreier Stahl under stable to slightly interrupted conditions. Compatible with ISO turning systems, the insert ensures predictable set-up and repeatable results. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 060204 T6215 turning insert (ISO) by Tungaloy CPMT 060204 T6215 is an ISO-standard rhombic turning insert designed for external and internal turning of rostfreier Stahl, offering a wear-resistant coating and a secure mounting configuration CVD-coated carbide for wear resistance Optimised for turning rostfreier Stahl Rhombic ISO insert, 11° clearance Cylindrical hole with single-sided countersink Longer production runs with predictable wear resistance The combination of a CVD-coated surface and a hard carbide substrate provides a consistent wear pattern that maintains cutting geometry over time. This reduces the need for frequent index changes and supports longer uninterrupted machining cycles. In practice, diminished flank wear and sustained edge integrity translate into fewer tool changes and improved component regularity, contributing directly to lower machining costs per part. Geometry that improves chip control and edge stability A rhombic plate form with an 11° clearance and a 0.4 mm radius focuses the cutting forces to encourage stable chip formation. The single-sided chipbreaker directs chips effectively for turning operations, while the 80° nose angle balances strength and accessibility in external and internal profiles. The CPMT060204 geometry is tuned to promote consistent surface finish and minimise vibration when used under stable to slightly interrupted cutting conditions. Quick integration into ISO turning tool systems Being an ISO-standard insert, compatibility is achieved by matching the holder in terms of form, clearance, tolerance class, fixation, size and thickness. The insert’s cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating in the pocket, reducing set-up time and improving process reliability. The predictable mounting behaviour allows efficient tool change routines and simplifies inventory management for ISO turning toolsets. Economical machining of rostfreier Stahl with grade T6215 The T6215 grade is engineered as a wear-resistant option for machining rostfreier Stahl under predominantly stable conditions or light interruptions. The coating-substrate system provides a compromise between edge toughness and abrasion resistance, delivering longer edge life in many stainless applications. For operations prioritising consistent surface quality and reliable tool life, this insert represents a pragmatic choice that balances performance with economy. Contact Metav Werkzeuge for supply and technical advice on the Tungaloy CPMT 060204 T6215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6945221 Manufacturer SKU: TUN6945221 Label: CPMT060204 T6215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Thickness: 2.38 mm Nose angle: 80° Clearance angle: 11° Size designation: 06 Special features Grade: T6215 Coating/type: CVD-coated carbide Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Drehen (turning) — compatibility via ISO holders, clamping set and screws FAQ What is the primary application of this insert? The CPMT060204 T6215 insert is intended for external and internal turning operations, primarily designed for machining rostfreier Stahl under stable to lightly interrupted cutting conditions. Which materials is the T6215 grade best suited for? T6215 is a wear-resistant CVD-coated carbide grade formulated for rostfreier Stahl, providing a balance of edge life and surface quality in stainless applications. How does the insert secure to the holder? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) for positive clamping; correct seating depends on matching holder form, fixation and tolerance class. Can the insert be used for interrupted cuts? The insert is suitable for stable to slightly interrupted conditions; for heavy interruptions, consider a grade or geometry specifically specified for interrupted cutting. What are the key geometric features that affect performance? The rhombic form, 11° clearance, 80° nose angle and 0.4 mm corner radius influence chip flow, edge strength and accessibility, all contributing to consistent surface finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, ISO compatibility and a compact 0.4 mm nose radius for efficient, repeatable turning operations; order the inserts directly via Metav Werkzeuge or consult the technical team for application-specific advice. CPMT 060204 T9215 CPMT060204 Tungaloy turning insert, rhombic 80°, 0.4 mm The CPMT060204 T9215 is an ISO rhombic turning insert designed for external and internal turning, combining high wear resistance with fracture toughness for medium-duty steel machining. CVD-coated carbide grade T9215 For medium-duty steel machining Rhombic 80° geometry, 11° clearance 0.4 mm nose radius for versatile turning Boosted productivity with a wear‑resistant grade The CVD-coated T9215 grade is engineered for sustained performance in continuous to slightly interrupted cuts, delivering a balance of wear resistance and fracture toughness that supports higher material removal rates. This results in improved cycle times and lower tooling costs per part, since the coating and substrate combination extends usable edge life. The ground geometry and coating together enable reliable cutting when machining common steels, making the insert a pragmatic choice where consistent throughput and predictable tool life are priorities. Guaranteed system fit and secure clamping Compatibility with the toolholder is determined by the insert form, relief angle, tolerance class, fastening and thickness; the ISO standardisation of the rhombic insert simplifies integration into established holders. The rhombic 80° profile with 11° clearance ensures predictable seating and chip flow, while the central hole with a cylindrical bore and one‑sided countersink supports secure fastening. When matched to the correct seat and clamp, the arrangement reduces vibration and promotes repeatable edge engagement for stable machining results. Practical machining guidance for improved surface quality For external and internal turning the single‑sided chipbreaker and the 0.4 mm nose radius favour a blend of form accuracy and surface finish: a smaller nose radius supports fine finishing passes and reduced cutting forces, whereas modest increases in feed deliver faster metal removal. Select the chipbreaker and grade in line with stock material, cutting mode and machine stability to avoid overloads. The design supports a wide range of steel applications and helps achieve a consistent edge life and the surface quality required for downstream processing. Contact Metav Werkzeuge for tailored recommendations on Tungaloy CPMT060204 T9215 inserts and fast supply — speak to the technical advisors for process-matched grades and holder compatibility Technical Data Article number: 6774065 Manufacturer SKU: TUN6774065 Model series: ISO turning inserts Facts Geometry: 80° rhombic form Nose radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Size: 06 Special features Material: carbide Coating: CVD-coated Grade: T9215 Chipbreaker: one-sided Hole: with hole; cylindrical bore + single-sided countersink (40°–60°) Shape: rhombic Application: turning (external and internal) FAQ What materials is this insert best suited for? The Tungaloy CPMT060204 T9215 insert is tailored for medium-duty steel machining; the CVD-coated carbide grade provides wear resistance and toughness for common steel applications. How does the 0.4 mm nose radius affect the cut? A 0.4 mm nose radius on the CPMT060204 promotes improved surface finish on finishing passes and lowers cutting forces during light cuts while still allowing acceptable feeds for general turning tasks. Is the insert compatible with standard ISO holders? Yes, the CPMT060204 conforms to ISO dimensions; compatibility depends on matching holder form, relief angle, tolerance class, fastening and plate thickness. What chip control can be expected with the single‑sided chipbreaker? The one-sided chipbreaker on the CPMT060204 supports predictable chip formation in stable setups and aids in evacuation for a range of feeds typical of medium steel turning. Which feature most improves productivity with this insert? The combination of the CVD-coated T9215 grade and the rhombic 80° geometry provides a reliable edge performance that translates into longer tool life and more consistent cycle times. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide T9215 and the ISO CPMT geometry delivers a robust solution for productive medium-steel turning; the 0.4 mm corner radius and 11° clearance angle balance surface finish with edge strength. Order the insert directly via Metav Werkzeuge or consult the technical team for compatibility and application advice. CPMT 060204 T9215 turning insert by Tungaloy The CPMT 060204 T9215 turning insert is an ISO‑standard rhombic indexable insert designed for external and internal turning in medium steels, offering CVD coating for extended wear resistance. *CPMT 060204 form in ISO rhombic geometry *CVD-coated carbide T9215 for medium steel *0.4 mm corner radius, 11° clearance angle *Cylindrical hole with single-sided countersink Productive medium‑steel cutting with consistent tool life The combination of CVD-coated carbide and the T9215 grade provides a targeted balance between wear resistance and fracture toughness, making the insert particularly suitable for continuous to light interrupted cuts in medium-grade steels. The coating reduces flank and crater wear, which in practice leads to longer life under stable cutting conditions and more predictable tool-change intervals. Selecting the matching chipbreaker and grade for the workpiece and machine rigidity enables higher metal removal rates while maintaining reproducible performance. Secure clamping and geometry that improves stability and finish Designed in the ISO CPMT geometry, the rhombic form with an included angle of 80°, a 0.4 mm corner radius and an 11° clearance angle gives a reliable compromise between edge strength and surface quality. The insert’s cylindrical hole with a single-sided countersink (40°–60°) and 2.38 mm thickness ensure consistent seating in compatible holders; compatibility is determined by form, clearance, tolerance class, fastening method, size and thickness. For workshops without extensive tooling experience: the clearance angle prevents rubbing at the flank, while the corner radius controls the load on the cutting edge and the resulting surface finish. Practical application notes and selection guidance The plate is intended for general turning tasks — external and internal — where medium steels are the predominant material. The single-sided chipbreaker and the T9215 grade are a practical first choice when stability and repeatability are required; choose a coarser chipbreaker or a different grade only when machining conditions demand it. The insert form and its rhombic geometry allow versatile mounting in standard external holders and boring bars that accept CPMT‑format inserts. For specific set‑ups or unusual workpiece materials, Metav Werkzeuge’s consultants can advise on the best grade and chipbreaker pairing to achieve the desired throughput and surface quality. Contact Metav Werkzeuge for tailored application advice or to confirm holder compatibility and stock availability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773969 SKU: 6773969-Tungaloy Manufacturer SKU: TUN6773969 Model series: ISO-turning inserts Name: CPMT060204 T9215 Tungaloy insert Facts Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Thickness: 2.38 mm Size: 06 ISO designation: 060204 Special features Material: carbide Coating / grade: T9215 (CVD-coated) Plate form: rhombic (CPMT) Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) Compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CPMT 060204 T9215 insert is optimised for medium steels; the T9215 CVD coating enhances wear resistance for productive turning operations. Can the insert be used for interrupted cuts? Yes, the grade and geometry are designed for continuous to light interrupted cutting; for heavy interruptions a different grade or larger corner radius may be preferable. Which holders are compatible with this insert? Compatibility depends on ISO CPMT geometry, mounting form, tolerance class, fastening method, size and thickness; the insert fits standard holders designed for CPMT‑format plates. How does the corner radius affect surface finish and strength? A 0.4 mm corner radius provides a balance: it reduces cutting-edge loading compared with a smaller radius and typically improves edge life while still enabling a decent surface finish. Is the hole style important for clamping reliability? Yes; the cylindrical hole with a single-sided countersink (40°–60°) secures repeatable seating and clamping in the corresponding insert pocket, improving stability during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable chip control and ISO interchangeability for efficient medium-steel turning; order original inserts directly via Metav Werkzeuge or consult the specialists for application advice. CPMT 060204 T9215 – Indexable turning insert for turning, Tungaloy A CPMT 060204 T9215 indexable insert designed for ISO-standard external and internal turning, suited to medium-steel machining with a rhombic geometry and one-sided chipbreaker. ISO rhombic insert CPMT 060204 CVD-coated carbide grade T9215 0.4 mm corner radius for versatility Cylindrical hole with 40°–60° countersink High productivity through wear-resistant coating and material choice The combination of a CVD-coated surface and a carbide substrate in grade T9215 delivers a stable cutting edge and extended life in the machining of medium steel. The coating increases resistance to abrasive wear while the substrate maintains fracture toughness, which translates into consistent performance during continuous to slightly interrupted cuts. This results in fewer tool changes and improved uptime on production lines, supporting higher throughput without sacrificing component quality. Stable clamping and predictable geometry for reliable results Conformity to ISO dimensions and the rhombic form ensure compatibility with a broad range of holders and boring bars; the rhombic shape and 11° clearance permit secure seating and controlled engagement. The 80° approach angle helps to distribute cutting forces and reduce vibration in many turning set-ups, while the cylindrical hole with one-sided countersink (40°–60°) provides repeatable clamping and quick index changes. These features together enable precise, repeatable machining and simplify tool management across different machines. Application guidance: choose geometry and chip control to match the task A 0.4 mm corner radius balances strength and finish capability for general-purpose turning, offering a compromise between edge robustness and surface quality. The one-sided chipbreaker enhances chip control for the intended material range, reducing the risk of built-up edge and improving swarf evacuation. With a 2.38 mm thickness the insert offers sufficient rigidity for medium-depth cuts; pairing the insert with an appropriate holder, shim and clamping screw within the ISO system maximises stability. For heavy interruptions or tougher alloys, select a more robust corner radius or a different chipbreaker geometry to match the application. Contact Metav Werkzeuge today for tailored application advice and availability of original Tungaloy inserts — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6773972 Manufacturer SKU: TUN6773972 Label: CPMT060204 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: carbide Grade / coating: T9215 (CVD-coated) Facts Thickness: 2.38 mm Corner radius: 0.4 mm Clearance (frewinkel): 11° Approach angle: 80° Size: 06 Special features Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker ISO-standard indexable insert for external and internal turning Intended use: medium-steel machining, continuous to slightly interrupted cuts FAQ What materials is this insert suitable for? The CPMT 060204 T9215 is optimised for medium-steel machining; the CVD-coated carbide grade provides wear resistance and toughness for these materials. How is chip control achieved with this geometry? Chip control is provided by the one-sided chipbreaker integrated into the insert; the geometry directs and breaks chips reliably during continuous to slightly interrupted turning operations. Which holders are compatible with this insert? ISO-compatible external holders and boring bars designed for CPMT 060204 geometry are compatible; compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness. Can this insert be used for interrupted cuts? Yes — the T9215 grade and the carbide substrate are suitable for continuous and slightly interrupted cuts; heavier interruptions may require a larger corner radius or different chipbreaker. What does the hole and countersink arrangement mean for clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure, repeatable clamping and facilitates straightforward index changes while maintaining seating stability Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9215 and precise ISO geometry for high productivity and dependable tool life; order the CPMT060204 insert directly via Metav Werkzeuge or consult the technical team if required. CPMT060204 T9215 — Tungaloy indexable insert for turning The CPMT060204 T9215 is an ISO‑standard rhombic indexable insert engineered for external and internal turning operations in medium steel applications. CVD-coated T9215 carbide grade ISO rhombic insert, 11° relief 0.4 mm corner radius for versatile turning Increased productivity through hard-wearing coating and grade The combination of a CVD‑coated surface and a high‑performance carbide substrate in grade T9215 delivers a balance of wear resistance and fracture toughness that supports sustained machining rates. The coating enhances surface hardness and thermal stability, which in practice reduces flank wear and extends edge life during prolonged runs. For production environments aiming to raise output without compromising repeatability, this specification translates to measurable gains in productivity and fewer index changes. Precise geometry for secure clamping and dimensional control The insert features an ISO rhombic form with an included angle of 80° and an 11° relief that together ensure stable cutting engagement and predictable chip flow. A 0.4 mm corner radius and a plate thickness of 2.38 mm provide an effective compromise between strength and edge definition. The mounting employs a cylindrical hole with a one‑sided countersink (40°–60°), enabling reliable seating and repeatable positioning in compatible holders. Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, so correct holder selection is essential for consistent dimensional control. Effective chip control for improved surface finish and tool life Equipped with a one‑sided chipbreaker, the insert is optimised for continuous to slightly interrupted cutting conditions typical of turning steel. The chipformer reduces the risk of long, unwieldy chips and supports a stable cutting zone, which helps to maintain surface integrity and reduces secondary finishing. Choosing the appropriate chipbreaker geometry and the T9215 grade according to the machining strategy and part stability reduces rework and supports predictable cycle times. Seamless system integration and economical machining As an indexable insert, this component is intended for use within a system comprising a matching external holder or boring bar, a seating/ clamping kit and the necessary fixing screws. Integration into a well‑matched tool system delivers reproducible results, shorter setup times and lower overall tooling costs through longer insert life and fewer interruptions. The design supports both external and internal turning, making it a versatile choice for workshops aiming for cost‑effective, high‑quality production. For guidance on selecting compatible holders or to arrange supply from Tungaloy through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed technical advice and availability. Technical data Article number: 6951191 Manufacturer SKU: TUN6951191 Product SKU: 6951191-Tungaloy Model series: ISO indexable turning inserts Material: carbide Facts ISO designation: 060204 Size: 06 Included angle: 80° Relief angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Special features Grade: T9215 Coating: CVD One‑sided chipbreaker Rhombic plate form With hole: cylindrical hole + one‑sided countersink (40°–60°) Application: external and internal turning System components: insert, compatible holder or boring bar, seating/clamping set, spare screws FAQ Which materials is this insert best suited for? The CPMT060204 T9215 insert is optimised for medium steel machining, combining the T9215 grade and CVD coating to perform well under continuous to slightly interrupted cuts. What are the corner radius and plate thickness? The insert features a 0.4 mm corner radius and a plate thickness of 2.38 mm; it is designated ISO 060204. How is the insert secured in the holder? Clamping relies on the rhombic form, relief angle and plate thickness; the insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for stable seating and repeatable positioning. Can the insert be used for internal turning? Yes, the geometry and chip control make the insert suitable for both external and internal turning operations. What coating and grade are specified for improved tool life? The product carries a CVD coating on a carbide substrate in grade T9215, chosen for wear resistance and fracture safety in medium steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide T9215, ISO conformity and a compact 0.4 mm corner radius delivers reliable wear resistance and fracture safety for medium-steel turning; order the CPMT060204 T9215 Tungaloy insert directly via Metav Werkzeuge or consult the technical team for application guidance. CPMT060204 T9215 — Tungaloy ISO turning insert, CVD-coated carbide for medium-steel turning A CPMT060204 T9215 is an ISO-standard rhombic turning insert designed for efficient external and internal turning of medium-grade steel, offering a single-sided chipbreaker and a cylindrical hole with a single-side countersink for secure mounting. ISO rhombic turning insert, size 06 CVD-coated carbide grade T9215 Single-sided chipbreaker, with hole and countersink 0.4 mm corner radius, 11° relief angle Consistent wear resistance for medium-steel production The CVD-coated carbide composition combined with the T9215 grade provides a balanced mix of wear resistance and fracture toughness, making this insert particularly suited to continuous and lightly interrupted cuts in medium steel. The coating reduces adhesion and oxidation at elevated cutting temperatures, which translates into longer tool life and fewer tool changes. As an indexable cutting solution, the insert ensures predictable performance across repeating turning operations, supporting steady production rhythms and improved process reliability. Secure seating and geometric data that support repeatability Compatibility with tool holders is governed by form, clearance and tolerance class, fixation method, size and thickness; the rhombic geometry and the cylindrical hole with a single-side countersink ensure stable clamping and repeatable seating. The insert features a 0.4 mm corner radius, an 11° relief angle and a plate thickness of 2.38 mm, dimensions that contribute to controlled edge engagement and consistent surface finishes. These defined geometries simplify tool changeover and reduce setup variability when used with ISO-compliant holders. Productivity advantages and application recommendations Equipped with a single-sided chipbreaker, this insert manages chip formation for typical turning feeds and depths in medium steel, improving swarf control and reducing risk of re-cutting. The compact size and robust substrate enable higher cutting speeds than uncoated grades while maintaining edge security, which supports increased throughput and lower cycle times. For optimal results, select cutting parameters and a chipbreaker style that match workpiece stability and the intended surface finish; this balancing act yields both efficiency gains and predictable tool life. For reliable medium-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored technical advice and prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951157 Manufacturer SKU: TUN6951157 SKU: 6951157-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CPMT060204 T9215 Tungaloy-Wendeplatte Facts Corner radius: 0.4 mm Relief angle: 11° Included angle: 80° Thickness: 2.38 mm Size: 06 Countersink angle: 40°–60° Special features CVD-coated carbide grade T9215 Rhombic plate form, single-sided chipbreaker Cylindrical hole with single-side countersink Intended use: turning (external and internal) Compatible with ISO holders determined by form, clearance, tolerance, fixation, size and thickness Best suited for medium-steel machining; continuous to lightly interrupted cuts FAQ What materials is this insert intended for? The CPMT060204 T9215 insert is designed primarily for medium-grade steel machining and performs well in continuous and lightly interrupted turning operations. How is the insert fixed to the holder? The insert has a cylindrical hole with a single-side countersink (40°–60°) to allow secure clamping in compatible ISO tool holders and clamping sets. Which cutting geometry parameters are relevant for setup? Key dimensions to verify are the 0.4 mm corner radius, 11° relief angle and 2.38 mm plate thickness to ensure correct seating and the expected cutting behaviour. Can the insert handle interrupted cuts? Yes; the T9215 grade combines fracture resistance and wear resistance suitable for continuous and mildly interrupted cutting; heavier interruptions may require alternative grades or additional process adjustments. What is the exact product identification for ordering? Order using the article number 6951157 or SKU 6951157-Tungaloy for the CPMT060204 T9215 Tungaloy turning insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide grade that balances toughness and wear resistance for medium‑to‑heavy steel turning; precise ISO conformity and a rhombic, 80° geometry ensure secure seating and predictable performance. Order the CPMT060204 directly via Metav Werkzeuge or consult our advisors for holder compatibility and process optimisation. CPMT 060204 T9225 turning insert by Tungaloy — CVD‑coated carbide, 11° clearance CPMT060204 is an ISO‑format turning insert designed for external and internal turning applications in medium‑to‑heavy steel machining. CVD‑coated carbide grade T9225 80° rhombic shape, 11° clearance 0.4 mm corner radius for robustness One‑sided chipbreaker, with mounting hole Maximise cutting stability and life in steel turning The CPMT060204 T9225 is a CVD‑coated carbide insert engineered to provide a resilient balance of wear resistance and toughness for varying engagement conditions. The T9225 grade is a robust universal choice for medium‑to‑heavy steel machining where occasional interruptions require additional toughness rather than purely hard coatings. The 80° rhombic geometry increases cutting edge support and reduces deflection in long overhangs, while the 0.4 mm corner radius contributes to edge strength without sacrificing surface finish. These attributes combine to prolong tool life and maintain consistent chip formation under changing cutting conditions. Secure mounting and ISO compatibility for reliable setups As an ISO‑standard insert, compatibility is determined by shape, 11° clearance, tolerance class, attachment type, size and 2.38 mm thickness; this makes integration into established tool systems straightforward when the matching holder and clamping set are selected correctly. The plate is supplied with a hole featuring a cylindrical bore and a one‑sided countersink (40°–60°), enabling positive seating and repeatable clamping. Choosing the correct chipbreaker profile and matching the insert to a suitable external holder or boring bar ensures stable cutting forces and reduces the risk of chip jamming. Clear mechanical conformity reduces setup time and increases process repeatability in a production environment. Practical application advice to reduce downtime and improve results Use the insert with a one‑sided chipbreaker and an appropriate holder when performing external or internal turning on medium‑to‑heavy steel components; the combination supports effective chip control and consistent surface quality. For slightly interrupted cuts or variable engagement, the CVD coating paired with a tougher substrate helps prevent premature edge chipping, contributing to predictable tool life and fewer unscheduled tool changes. Where finish is critical, moderate feeds and the correct corner radius selection will balance robustness and surface integrity. For complex workpieces or non‑standard clamping arrangements, consult holder specifications to verify seat geometry and screw fit. Contact Metav Werkzeuge for specific application recommendations and to request a tailored quote for the CPMT060204 T9225 insert; technical specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6951158 Manufacturer SKU: TUN6951158 ISO designation: CPMT060204 Grade: T9225 Material: carbide Facts Corner radius: 0.4 mm Plate size: 06 Plate thickness: 2.38 mm Clearance angle: 11° Shape angle: 80° Special features CVD‑coated carbide Rhombic plate form With hole: cylindrical hole + one‑sided countersink (40°–60°) One‑sided chipbreaker ISO‑norm turning insert FAQ Are ISO‑format toolholders compatible with this insert? The CPMT060204 T9225 turning insert follows ISO dimensions, but final compatibility depends on the holder's form, clearance, tolerance class, fastening method, size and thickness; verify holder specifications against the CPMT060204 dimensions (SKU TUN6951158). Which materials is this grade intended for? The T9225 grade is a robust universal choice for medium‑to‑heavy steel machining; the CVD‑coated carbide substrate is designed to handle changing engagement conditions and light interruptions. Is the insert suitable for interrupted cuts? Yes, the combination of a tougher substrate and the T9225 coating provides additional edge strength for slightly interrupted cuts while maintaining acceptable wear resistance. How is the insert secured in the holder? The plate is supplied with a hole and a cylindrical bore with a single‑sided countersink (40°–60°); this arrangement requires a matching screw and clamping geometry in the toolholder to ensure correct seating and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T9225 Wendeplatten - Tungaloy
Benefit from a robust combination of CVD-coated cemented carbide T9225 and ISO-standard geometry for dependable medium-to-heavy steel turning and stable chip control; the CPMT060204 format with 0.4 mm corner radius and 11° relief supports consistent surface quality and extended tool life. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the technical advisors for matching chipbreakers and holder compatibility. CPMT 060204 T9225 ISO rhombic turning insert by Tungaloy — CVD-coated carbide, 11° relief CPMT060204 T9225 is an ISO rhombic turning insert designed for general external and internal turning in steel applications, offering a robust universal grade for varying engagement conditions ISO rhombic insert size 06 CVD-coated cemented carbide T9225 11° relief for general turning Cylindrical hole with 40°–60° countersink Maximise productivity in medium-to-heavy steel turning The T9225 grade is a CVD-coated cemented carbide developed as a robust universal option for the mid- to heavy-duty machining of stainless steel and conventional steel. Its combination of coating and substrate delivers stable chip formation under varying cutting conditions, which translates into fewer interruptions for insert changes and a more predictable process flow. The 0.4 mm corner radius and the insert’s rhombic 06 geometry provide a balance between edge strength and achievable surface finish, reducing the risk of premature edge chipping during light interruptions or variable engagement. Secure fit and predictable clamping for consistent results Compliance with ISO geometry ensures the insert mates with compatible holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The cylindrical hole with a one-sided countersink (40°–60°) delivers repeatable seating and secure torque distribution, while the 2.38 mm thickness contributes to stability in heavy cuts. Consider the single-sided chipbreaker option indicated for the insert: selecting a chipbreaker and grade aligned to the workpiece material and machining stability supports longer tool life and reduces cycle-time variance. Clear indication of ISO designation and tolerances simplifies inventory and holder selection across production lines. Coating, material and recommended application for lower total cost of ownership The CVD coating provides enhanced wear resistance and temperature tolerance compared with uncoated grades, helping to maintain cutting-edge integrity over longer tool life. For turning operations where interrupted cuts or changing depths of cut occur, the T9225 grade offers increased toughness without sacrificing abrasion resistance, making it suitable for a broad range of steel components. The insert’s 80° included angle and 11° relief contribute to predictable cutting forces and help maintain surface integrity, enabling stable machining and fewer rework cycles. For best results, pair the insert with a properly rated external holder or boring bar and verify clamping surfaces and clearance angles before first use. For reliable machining with genuine Tungaloy inserts, order the CPMT060204 T9225 via Metav Werkzeuge or contact our consultants at Metav Werkzeuge for tailored advice and holder recommendations — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number: 6781320 Manufacturer SKU: TUN6781320 Metav SKU: 6781320-Tungaloy Model series: ISO turning inserts Facts ISO designation: 060204 Insert size: 06 Included angle: 80° Relief angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Special features Rhombic insert form CVD-coated cemented carbide grade T9225 Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Application: external and internal turning; medium to heavy steel machining Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? This insert is optimised for steel machining; the T9225 grade provides toughness for medium-to-heavy steel turning and performs well under variable engagement. How does the T9225 coating affect tool life? The CVD-coated surface on the CPMT060204 improves wear resistance and thermal tolerance, which helps to extend edge life and maintain consistent cutting performance. Which chipbreaker should be chosen for interrupted cuts? For interrupted or variable cuts, select a chipbreaker and grade that prioritise toughness; the single-sided chipbreaker fitted to this geometry is intended to support stable chip control in such conditions. Will this insert fit existing ISO holders? The insert is ISO-standard; compatibility is determined by matching the insert’s form, relief angle, tolerance class, fastening style, size and thickness to the holder specifications. What seating does the insert require? The insert features a cylindrical hole with a one-sided countersink (40°–60°) to ensure repeatable seating and secure clamping in appropriately matched holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade T9225 and a 0.4 mm corner radius to achieve stable chip formation and consistent performance in medium to heavy steel turning. For application advice or ordering, contact Metav Werkzeuge or request guidance from our technical consultants. CPMT 060204 T9225 indexable turning insert (Tungaloy) The CPMT060204 T9225 is an ISO rhombic insert developed for external and internal turning, offering a robust universal grade for variable engagement conditions in steel machining. ISO-indexable rhombic insert CPMT060204 CVD-coated carbide grade T9225 Robust for medium to heavy steel machining Cylindrical hole with single-side countersink Productivity through a balanced grade and coating The combination of a CVD-coated surface and carbide substrate provides a balance of wear resistance and toughness that supports uninterrupted production cycles. This universal grade is formulated for medium to heavy steel machining and copes well with slightly interrupted cuts, reducing the risk of premature edge failure. The result is a reduction in tool change frequency and a more predictable process window for batch runs and mixed-lot production. Secure clamping and geometrical compatibility for dependable results Designed to the ISO indexable insert system, the geometry and mounting features ensure compatibility with standard holders when form, clearance angle, tolerance class, fastening and thickness match. The rhombic shape and 80° included angle deliver stable edge support, while the cylindrical hole with one‑side countersink (40°–60°) provides reliable seating and torque transmission. These characteristics combine to support repeatable part quality and process reliability in workshop environments. Precision in detail: chip control and cutting geometry A 0.4 mm corner radius and a single-sided chipbreaker optimise chip flow and component finish while limiting cutting forces for the given grade. The 11° clearance angle helps maintain an effective cutting edge contact and reduces rubbing on the flank. Together, these features enable consistent surface finish and dimensional accuracy on turned components, making this insert suitable for both roughing passes and controlled semi-finishing operations. Practical integration and application guidance The insert thickness of 2.38 mm, compact 06 size and standard ISO designation make it straightforward to specify within established tool inventories. Match the chipbreaker and grade to the workpiece composition and cutting conditions to exploit the material coverage of the grade. For machining strategies, pair the insert with an appropriate external holder or boring bar, and observe recommended feeds and speeds for steel to extend tool life and increase overall process throughput. Contact Metav Werkzeuge for tailored application advice on the Tungaloy CPMT060204 insert and to arrange prompt supply or technical consultation Technical data Article number: 6951192 Manufacturer SKU: TUN6951192 SKU: 6951192-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications ISO designation: 060204 Size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Included angle: 80° Clearance angle: 11° Special features Carbide substrate CVD-coated grade T9225 Rhombic plate form Cylindrical hole + single-side countersink (40°–60°) Single-sided chipbreaker Application: Turning Suitable for medium to heavy steel machining FAQ What materials is this insert best suited for? The CPMT060204 T9225 insert is specified for medium to heavy steel machining and performs well under variable engagement and slightly interrupted cuts. Is the insert compatible with standard ISO holders? Yes. The indexable geometry and the ISO designation ensure compatibility provided form, clearance angle, tolerance class, fastening and thickness correspond to the holder. How does the T9225 coating help in production? The CVD-coated T9225 grade increases wear resistance while retaining sufficient toughness for changing engagement conditions, supporting longer tool life and stable chip formation. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with one-side countersink (40°–60°) enables secure seating and correct clamping torque transmission, improving positional stability during turning. Which cutting roles fit this insert best? The insert suits roughing and robust semi-finishing operations in steel where a combination of chip control and edge toughness is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060204 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide grade and ISO compatibility to increase process stability and tool life; the combination of a 0.4 mm corner radius and a one‑sided chipbreaker supports consistent chip control in medium to heavy steel turning. Order the inserts directly via Metav Werkzeuge or request application guidance from our consultants. CPMT 060204 T9225 Turning insert by Tungaloy — ISO rhombic 80° The CPMT060204 T9225 insert enables reliable outside and inside turning in industrial steel applications with a robust, universal grade for varying cut conditions CVD‑coated carbide grade T9225 for heavy duty ISO CPMT 060204 rhombic insert, 80° included angle 0.4 mm corner radius for controlled edge form With cylindrical hole and 40°–60° countersink Increase throughput with a robust CVD‑coated grade The combination of a CVD‑coated carbide substrate and the T9225 grade delivers an excellent balance of hardness and toughness for frequent interruptions and changing engagement conditions. This material combination reduces flank wear and maintains a stable cutting edge under heavier feeds, which translates into fewer indexings and longer effective cutting time per insert. The one‑sided chipbreaker promotes predictable chip formation, helping to maintain machining cadence and reduce cycle time without sacrificing surface quality. Precision geometry for repeatable turning results The CPMT060204 form (ISO 060204) features a rhombic 80° included angle and an 11° clearance that together provide secure seating and consistent cutting geometry in standard ISO holders. The 0.4 mm corner radius supports controlled profile generation and improved edge strength when working steels of varying machinability. Because the insert is ISO‑standardised, compatibility is governed by form, clearance angle, tolerance class, fixing method, size and thickness, enabling quick replacement in established tool systems and minimising downtime. Practical handling and mounting for dependable performance Featuring a cylindrical hole with a single‑sided countersink (40°–60°), the insert allows straightforward clamping and secure locating in compatible holders. The standard system setup comprises the ISO indexable insert, a matching external holder or boring bar, backing pad/clamping set and replacement screws; this modular approach simplifies inventory and ensures that the cutting geometry remains consistent across tool changes. Correct holder selection and clamping torque preserve the intended rake and clearance angles, which in turn supports tool life and process reliability. Application fit and workshop recommendations Designed as a robust universal grade for turning, this insert is optimised for medium to heavy steel machining when slightly interrupted cuts or variable engagement demand added toughness. For best results, select the chipbreaker and grade to match workpiece material and machining stability; when higher speeds are required, verify the selected cutting data against holder rigidity and machine power. The insert’s geometry and coating combination supports reproducible surface finish and long edge life in demanding production environments. Contact Metav Werkzeuge for tailored cutting data, mounting advice and application support for the Tungaloy CPMT060204 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781045 SKU: 6781045-Tungaloy Manufacturer SKU: TUN6781045 Brand: Tungaloy Model series: ISO turning inserts Designation: CPMT060204 Facts Corner radius: 0.4 mm Included angle: 80° Clearance angle: 11° Thickness: 2.38 mm Plate size: 06 Hole: cylindrical hole + single‑sided countersink (40°–60°) Special features Material: CVD‑coated carbide Grade: T9225 Shape: rhombic Chipbreaker: one‑sided Application: turning (outside and inside) Compatibility: ISO‑standard holder systems Typical use: medium to heavy steel machining System build: ISO insert, matching external holder or boring bar, backing pad/clamping set and replacement screws FAQ What materials is the CPMT060204 T9225 insert intended for? The CPMT060204 Tungaloy insert is optimised for medium to heavy steel machining and performs well under variable engagement and slightly interrupted cuts. How does the T9225 coating support production? The CVD‑coating of the T9225 grade increases wear resistance while preserving toughness, improving tool life and process stability for the CPMT060204 insert (SKU 6781045‑Tungaloy). Which holder features are required for correct mounting? A compatible ISO holder that matches form, clearance angle, tolerance class, fixing method, size and thickness is required; the insert’s cylindrical hole with countersink ensures positive clamping and repeatable seating. What benefits does the 0.4 mm corner radius provide? The 0.4 mm corner radius enhances edge strength and allows controlled profile generation, balancing surface finish and edge stability in turning operations. Is the CPMT060204 suitable for finishing cuts? While primarily a robust universal grade for medium to heavy cuts, the insert can be applied to finishing with adapted feeds and cutting parameters; choose a more positive holder setup and finer feed when focusing on surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 060204 T9225 Wendeplatten - Tungaloy
Take advantage of a proven combination: a CVD-coated cemented carbide grade that balances toughness and wear resistance, an ISO CPMT 060204 geometry that ensures holder compatibility, and a 0.4 mm nose radius that supports consistent surface finish and form control — order genuine stock via Metav Werkzeuge or consult our specialists for application-specific recommendations. CPMT 060204 T9225 — Turning insert (Tungaloy) The CPMT 060204 T9225 is an ISO-standard indexable turning insert designed as a robust universal grade for medium-to-heavy steel turning applications. ISO CPMT 060204 geometry CVD-coated cemented carbide grade T9225 0.4 mm nose radius for consistent finish Cylindrical hole with 40°–60° countersink Reliable performance in medium-to-heavy steel turning The insert is built on a CVD-coated cemented carbide substrate in grade T9225, which is engineered for a broad range of steel machining tasks where interrupted cuts or variable engagement demand additional toughness. The combination of coating and substrate provides improved wear resistance while maintaining edge security under tougher cutting conditions; this translates into longer effective tool life and more consistent component quality. As an ISO-standard element, the insert integrates into established tool systems, allowing predictable process planning and reduced setup times. Secure clamping and geometry for steady cutting Mechanical stability is supported by the insert's rhombic shape and a cylindrical hole with 40°–60° countersink, which together enable reliable clamping and repeatable seating in compatible holders. The 11° relief angle and a plate thickness of 2.38 mm contribute to vibration damping and force distribution across the seat, reducing the risk of edge chipping under heavier feeds. These geometric attributes help maintain cutting stability, especially when used with properly matched external holders or boring bars and the correct clamping shim or screw set. Optimised chip control and surface quality Chip formation is guided by a single-sided chipbreaker, chosen to balance effective chip control with strength at the cutting edge. The modest 0.4 mm nose radius improves surface finish without sacrificing corner strength, making the insert suitable for both finishing passes and more demanding semi-finishing operations. For varying workpiece stability or interrupted cuts, select the matching chipbreaker and grade combination to ensure reliable chip evacuation and consistent part appearance. Practical system considerations and application guidance This ISO insert is intended for system use with an appropriate outer holder or boring bar, backing shim or clamping set, and replacement screws. Compatibility with a given holder is determined by the insert form, 11° clearance, tolerance class, clamping type, size (06) and thickness, so verify these parameters during tool selection. The insert is tailored for turning operations on steel; where process stability or part geometry is constrained, opt for a more robust holder or reduce engagement to extend tool life. For complex workpieces or mixed batch production, pairing this grade with stable tooling results in predictable, productive machining cycles. For genuine Tungaloy CPMT 060204 T9225 inserts and tailored application advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm availability and receive technical guidance. Technical data Article number: 6781319 SKU: 6781319-Tungaloy Manufacturer SKU: TUN6781319 Model series: ISO turning indexable inserts Designation: CPMT060204 Grade: T9225 Material: cemented carbide Application: Turning Facts Insert size: 06 Thickness: 2.38 mm Nose radius: 0.4 mm Relief angle: 11° Insert angle: 80° Hole: with hole Hole style: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Special features ISO-standard CPMT geometry Rhombic insert form CVD-coated cemented carbide grade T9225 Designed for medium-to-heavy steel machining Compatibility via form, relief angle, tolerance class, clamping, size and thickness Intended system: outer holder or boring bar, backing shim/clamping set and replacement screws FAQ What materials is this insert suitable for? This CPMT 060204 T9225 insert is specified for medium-to-heavy steel machining; the T9225 grade is designed to offer toughness where interrupted cuts or variable engagement occur. How does the hole style affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) on the CPMT 060204 ensures stable seating and repeatable clamping in compatible toolholders, improving mechanical stability during turning. Which chipbreaker should be chosen for finishing? For improved surface finish, use the single-sided chipbreaker of this insert with reduced feed and the 0.4 mm nose radius; matching the breaker to workpiece rigidity and cutting parameters optimises results for the Tungaloy insert. Can this insert be used for interrupted cuts? Yes; the CVD-coated T9225 grade and robust geometry give the insert additional toughness suited to interrupted cuts in steel applications. What components are needed to assemble a working cutting system? A complete system typically includes a compatible outer holder or boring bar, a backing shim or clamping set and replacement screws; the CPMT 060204 integrates with standard ISO holders when form, relief angle and size match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide and an optimised 0.8 mm corner radius for reliable, medium-duty turning of stainless steels; order the CPMT060208 AH6225 Tungaloy insert directly via Metav Werkzeuge or contact our consultants for application advice. CPMT 060208 AH6225 Tungaloy insert for Turning CPMT060208 AH6225 is an ISO-standard rhombic turning insert designed for medium machining of stainless steels PVD-coated carbide for long tool life Optimised for stainless steels cutting ISO rhombic 06 format, 80° lead angle 0.8 mm corner radius for stable finishes Consistent cutting performance for stainless steels The CPMT060208 AH6225 Tungaloy insert combines a PVD-coated carbide substrate with a grade formulated for stainless steels, delivering a sharp yet stable cutting edge under variable conditions. This results in more consistent cycle times and reduced scrap rates during medium-duty turning. The AH6225 grade is optimised to balance wear resistance and toughness, which supports predictable tool life and helps maintain surface quality when machining demanding, work-hardening alloys. ISO compatibility and secure mounting for predictable operation Designed to ISO dimensions, the insert’s rhombic geometry and 80° lead angle ensure compatibility with a wide range of external holders and boring bars. Mounting reliability is aided by the cylindrical hole with single-sided countersink (40°–60°) and a plate thickness of 2.38 mm, which together provide secure clamping and repeatable seating. This predictable mechanical fit reduces downtime for tool changes and simplifies tool inventory management across ISO-based turning systems. Geometry and chip control that protect the process A 0.8 mm corner radius and a single-sided chipbreaker deliver improved chip formation and surface finish during turning. The 11° clearance and carefully tuned cutting edge geometry minimise built-up edge and vibration on intermittent cuts, while the PVD coating enhances thermal stability at moderate cutting speeds. The result is a robust insert that supports stable machining, lower rework rates and consistent part quality in production environments. For reliable stainless-steel turning with Tungaloy’s AH6225 grade, contact Metav Werkzeuge for stock information and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951173 SKU: 6951173-Tungaloy Manufacturer SKU: TUN6951173 Brand: Tungaloy Model series: ISO turning inserts Type designation: CPMT060208 Application: Turning Facts Material: Carbide Coating: PVD Size: 06 Thickness: 2.38 mm Lead angle: 80° Clearance angle: 11° Corner radius: 0.8 mm Special features Shape: Rhombic Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Grade: AH6225 Typical use: External and internal turning Compatibility: ISO‑standard holders (form, clearance, tolerance, fastening, size and thickness determine fit) FAQ Is this insert suitable for stainless steels? Yes. The CPMT060208 AH6225 Tungaloy insert uses a grade and PVD-coated carbide combination developed specifically for machining stainless steels, offering a balance of edge sharpness and stability for medium machining. Which holders fit this insert? Compatibility follows ISO dimensions: holders matching the CPMT 06 rhombic format, 80° lead angle and 2.38 mm plate thickness are suitable; secure clamping is achieved via the cylindrical hole with a single-sided countersink. What surface finish can be expected with the 0.8 mm radius? A 0.8 mm corner radius provides a good compromise between tool strength and surface quality, supporting consistent finishes on turned components while reducing the risk of chipping during interrupted cuts. How does the chipbreaker affect machining? The single-sided chipbreaker is tuned to promote controlled chip formation for turning operations, improving chip evacuation and reducing the likelihood of recut chips on the workpiece. Is the insert appropriate for internal turning or only external? The insert is suitable for both external and internal turning; holder geometry and setup should be chosen to match the ISO rhombic format and the intended operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 060208 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated AH6225 carbide grade and a stable 0.8 mm corner radius for consistent medium‑duty turning. Order directly via Metav Werkzeuge or contact the team for advice on holder compatibility and optimal chipbreaker selection. CPMT 060208 AH6225 indexable turning insert by Tungaloy — PVD‑coated carbide, 0.8 mm radius A CPMT060208 AH6225 indexable turning insert for ISO‑standard external and internal turning, optimised for stainless steels and medium machining conditions PVD‑coated carbide grade AH6225 Suited for machining stainless steels Rhombic ISO geometry, size 06 0.8 mm corner radius for profile stability Reliable cutting performance for stainless‑steel turning The combination of a PVD‑coated surface and the AH6225 carbide composition delivers a balanced performance profile for turning stainless steels under varying conditions. The coating improves wear resistance and reduces built‑up edge, while the substrate maintains toughness to resist chipping during interrupted cuts. The practical benefit is a stable cutting edge that supports longer tool life and fewer insert changes in medium‑duty production runs, which contributes to higher uptime and predictable process output. Versatile ISO geometry that fits common holders The rhombic shape and ISO designation ensure compatibility with a wide range of DIN/ISO holders; the mechanical fit is defined by form, clearance angle, tolerance class, fixation, size and thickness. This insert features an 11° relief angle, 2.38 mm thickness and an 80° included angle, with a cylindrical hole and single‑side countersink (40°–60°) for secure clamping. These characteristics provide consistent seating and repeatability, reducing vibration and improving surface finish when paired with a suitably rigid toolholder. Practical chip control and system‑level benefits Equipped with a single‑sided chipbreaker, the insert supports controlled chip formation when matched to the workpiece material and machining parameters. For turning, choose the chipbreaker and grade combination according to material class and setup stability; the AH6225 grade is a universal option tailored to stainless‑steel applications and fluctuating conditions. In practical terms, the system—insert, holder, shim and clamping screw—offers predictable assembly and quick indexability, helping to keep machine downtime to a minimum. Contact Metav Werkzeuge for a tailored recommendation on holder compatibility and to confirm the best chipbreaker for the specific stainless‑steel grade and machining strategy; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903283 SKU: 6903283-Tungaloy Manufacturer SKU: TUN6903283 Model series: ISO turning inserts Designation: CPMT060208 Facts Material: carbide Coating: PVD, grade AH6225 Size: 06 (ISO code 060208) Thickness: 2.38 mm Included angle: 80° Relief angle: 11° Corner radius: 0.8 mm Special features Shape: rhombic Hole: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning FAQ What material is the CPMT060208 AH6225 best suited for? The AH6225 grade is formulated for stainless steels; the CPMT060208 AH6225 insert from Tungaloy offers a balance of wear resistance and edge stability for medium‑duty stainless‑steel turning. How does the PVD coating affect tool life? The PVD layer on the AH6225 substrate improves wear resistance and reduces adhesion, which typically extends the service life of the insert under compatible cutting conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fixation, size and thickness; the ISO‑compliant CPMT060208 fits standard ISO turning holders sized for 06 inserts. Is the insert suitable for internal as well as external turning? Yes; the rhombic geometry and 11° relief angle make the insert suitable for both external and internal turning when used with appropriate tooling and setup stability. What is the function of the single‑sided chipbreaker? The single‑sided chipbreaker guides chip formation to enhance evacuation and surface quality in turning operations; pairing the chipbreaker with correct feeds and speeds is essential for optimal performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 060208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade that handles stainless steel reliably, an 80° rhombic geometry that stabilises cutting, and a compact 0.8 mm corner radius for consistent surface finish; order the insert via Metav Werkzeuge or contact their consultants for tailored adapter and clamping advice. CPMT 060208 AH6225 Turning indexable insert — PVD-coated carbide, rhombic 80° (Tungaloy) The CPMT 060208 AH6225 is an ISO-indexed rhombic turning insert designed for medium machining of stainless steel, offering a sharp yet stable cutting edge and compatibility with common external holders. ISO insert CPMT060208 AH6225 PVD-coated carbide for stainless steel machining Rhombic 80° geometry with 11° relief Centre hole with cylindrical bore and 40°–60° countersink Maximise productivity with a sharp, durable cutting edge The PVD-coated carbide grade AH6225 is engineered for a balance of edge sharpness and robustness, making it suitable for a wide range of stainless steel turning tasks. The coating improves wear resistance and reduces built-up edge, which in turn extends tool life and maintains part quality under varying cutting conditions. Using this insert in medium cutting regimes enables stable material removal and reduces the need for frequent index changes, supporting uninterrupted production cycles and predictable machining results. Stable clamping and standardised geometry for predictable results Compliance with ISO geometry simplifies tool planning: the rhombic 80° shape and 11° clearance angle deliver a compromise between strength and accessibility at the cut. The insert’s 0.8 mm corner radius and 2.38 mm thickness contribute to rigidity and control of cutting forces, while the centre hole with a cylindrical bore and single-sided countersink (40°–60°) ensures secure clamping in compatible holders. These defined interfaces reduce vibration, improve surface finish and make tool replacement straightforward within established tool systems. Practical system advice and selection guidance Select the single-sided chipbreaker and grade according to workpiece rigidity and machining strategy to exploit the insert’s strengths: improved chip control and repeatable edge performance. The system approach — indexable insert, suitable external holder, shim/clamping set and spare screws — enables rapid changeovers and reliable repeatability. For assistance with holder matching, feed and speed recommendations, or to verify compatibility with a specific setup, Metav Werkzeuge provides technical guidance and application-focused support to complement the insert’s capabilities. For reliable turning performance in stainless steel with Tungaloy AH6225 inserts, contact Metav Werkzeuge for delivery and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951201 SKU: 6951201-Tungaloy Manufacturer SKU: TUN6951201 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Dimensions & core data Corner radius: 0.8 mm Thickness: 2.38 mm Insert size: 06 Geometry angle: 80° Relief/clearance angle: 11° Hole: with bore + single-sided countersink (40°–60°) Materials & features PVD-coated carbide grade AH6225 Shape: rhombic Chipbreaker: single-sided Application: turning Suitable for stainless steel System components: ISO insert, holder, shim/clamping set, replacement screws FAQ Which materials is this insert optimised for? The CPMT 060208 AH6225 insert from Tungaloy is optimised for machining stainless steel and performs well in medium cutting conditions where a sharp, stable cutting edge is required. What are the key geometry features that affect stability? The rhombic 80° geometry combined with an 11° clearance angle and a 0.8 mm corner radius on the CPMT 060208 supports stable cutting forces and an improved surface finish. How does the insert secure in the holder? The insert uses a central bore with a cylindrical hole and a single-sided countersink (40°–60°) for positive clamping; holder compatibility depends on form, clearance angle, tolerance class, fixation method, size and thickness. Why choose the AH6225 grade? AH6225 is a PVD-coated carbide designed for a balance of edge sharpness and wear resistance, offering consistent tool life and reliable performance when machining stainless steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com