CPMT 080202 AH725 Wendeplatten - Tungaloy
Benefit from the universal, AH725 cutting grade and PVD‑coated carbide for reliable chip control and extended tool life; the ISO‑standard CPMT080202 geometry with a 0.2 mm corner radius ensures consistent surface quality and secure clamping. Order the CPMT080202 AH725 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 080202 AH725 – ISO turning insert (rhombic, 80°) by Tungaloy CPMT 080202 AH725 is an ISO‑standard turning insert designed for external and internal turning with a single‑sided chipbreaker and cylindrical locating hole for secure clamping ISO rhombic insert CPMT 080202 PVD‑coated carbide, AH725 grade Single‑sided chipbreaker for stable cuts 0.2 mm corner radius, with locating hole Robust grade for mixed steel and stainless‑steel turning The AH725 grade is a PVD‑coated carbide developed for universal use on steel and stainless steels, providing a balance between wear resistance and toughness. Its composition supports stable chip formation, which reduces unexpected insert breakouts and contributes to uninterrupted production cycles. For smaller tools or operations with variable workpiece materials, this cutting grade increases process security by tolerating changes in cutting conditions without rapid degradation. Precise geometry for repeatable results and safe clamping The rhombic form with an 80° included angle and 11° relief combines accessibility and strength: the shape permits reliable approach angles for external and internal turning while the geometry supports edge stability. A 0.2 mm corner radius improves load distribution at the cutting edge, leading to improved surface finish and longer edge life compared with smaller radii. The insert is supplied with a cylindrical locating hole plus a one‑sided countersink (40°–60°), enabling firm fixation in standard holders and consistent seating that reduces vibration and positional errors during interrupted cuts. System compatibility and practical benefits in production Delivered as part of an ISO‑based system, the insert works together with a matching external holder or boring bar, a support shim/clamping kit and replacement screws to form a stable assembly. The CPMT080202 AH725 insert is particularly suitable where a single chipbreaker design and PVD coating are needed to balance tool life and surface quality. The standardised form and tolerance classes simplify tool inventory and tool changeover, reducing setup time and supporting higher machine utilisation. When process reliability and broad material coverage are required, this insert delivers predictable performance and easier integration into existing tool systems. For process‑secure turning with Tungaloy AH725, contact Metav Werkzeuge for tailored advice and rapid supply of CPMT080202 inserts. Technical data Article number: 6856771 Manufacturer SKU: TUN6856771 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: CPMT080202 AH725 Facts Included angle: 80° Relief angle: 11° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 08 ISO designation: 080202 Special features Material: carbide (hard metal), PVD‑coated Chipbreaker: single‑sided Shape: rhombic Locating hole: cylindrical with one‑sided countersink (40°–60°) Typical application: external and internal turning System components: insert, external holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suited for? The CPMT080202 AH725 insert is intended for machining steel and stainless steels; the AH725 grade offers a universal balance of toughness and wear resistance for mixed‑material environments. How does the corner radius affect surface finish? A 0.2 mm corner radius reduces cutting edge stress and distributes loads, which typically improves surface finish and extends edge life compared with sharper radii. What does the locating hole with countersink provide? The cylindrical locating hole with a one‑sided countersink (40°–60°) enables secure, repeatable clamping in ISO holders and reduces the risk of insert movement during interrupted cuts. Is the insert compatible with standard ISO holders? Yes; the CPMT080202 follows ISO dimensions and seating geometry, so compatibility depends on matching form, relief angle, tolerance class, fastening and thickness with the chosen holder. Which cutting conditions benefit most from the AH725 grade? Applications with variable workpiece materials, small‑sized tools or where process security is critical will benefit from the AH725 PVD‑coated carbide due to its balanced wear resistance and fracture toughness. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 080202 AT9530 Wendeplatten - Tungaloy
Take advantage of a precise finishing solution that combines reliable surface quality, predictable wear behaviour and straightforward tool compatibility; the AT9530 coated cermet grade and the rhombic CPMT form ensure stable finishing and light turning of ferrous components. Order the CPMT080202 AT9530 Tungaloy insert directly via Metav Werkzeuge or consult our application specialists for selection support. CPMT080202 AT9530 CPMT indexable turning insert for Turning — Tungaloy A CPMT080202 AT9530 indexable insert engineered for finishing and light turning of ferrous components, offering a fine 0.2 mm corner radius and a coated cermet grade tuned for consistent surface quality. Coated cermet grade AT9530 for superior finish 0.2 mm corner radius for fine surface quality Rhombic CPMT shape with 80° included angle Centre hole with countersink 40°–60° for secure fixing Mirror-like surface finish for finishing passes The combination of the AT9530 coated cermet cutting material and a small 0.2 mm corner radius is designed to prioritise surface integrity during finishing operations. In light and semi-finishing turning, this composition minimises built-up edge formation and reduces microchatter, which translates into fewer rework cycles and consistent part-to-part quality. The result is an elevated surface quality with predictable tool wear, helping to keep downstream processes steady. Secure seating and ISO compatibility for reliable machining Built to ISO form standards, the rhombic CPMT geometry ensures straightforward integration with matching toolholders. The insert features an 11° free angle, 2.38 mm thickness and a centre hole with a cylindrical bore plus a one-sided countersink (40°–60°), supplying a secure clamping interface and exact repeatability in the pocket. Compatibility depends on form, free angle, tolerance class, fastening method, size and thickness, so the design supports rapid tool changes and stable fixture behaviour. Stable cutting performance with controlled chip formation The single-sided chipbreaker and the coated cermet substrate deliver controlled chip formation and uniform wear, which contributes to consistent cycle times and surface finish. For finishing and light turning of Stahl, the insert’s coating provides an optimised tribological layer that extends edge life under moderate cutting parameters. The geometry and grade aim to reduce the frequency of tool adjustments and enable predictable process windows, improving overall productivity. Practical recommendations for process integration For best results in Turning applications, pair the insert with a compatible external holder or boring bar designed for CPMT inserts and select a chipbreaker matching material stability and feed rate. If the machining set-up is less rigid, a slightly more robust chipbreaker or adjusted cutting data will improve performance without sacrificing finish. If uncertain which chipbreaker or holder combination fits the application, Metav Werkzeuge’s advisors can provide targeted recommendations and material‑specific suggestions. For availability and expert selection advice on the Tungaloy CPMT080202 AT9530 insert, contact Metav Werkzeuge by e-mail or phone — technical guidance and stock information are available on request. Technical data Article number: 6773732 Manufacturer SKU: TUN6773732 Internal SKU: 6773732-Tungaloy Model series: ISO turning indexable inserts Core specifications Insert designation: CPMT080202 Size: 08 Corner radius: 0.2 mm Thickness: 2.38 mm Free angle: 11° Included angle: 80° Features and materials Cutting material: coated cermet (grade AT9530) Geometry: rhombic CPMT form Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Turning; finishing and light cutting of Stahl FAQ What materials is this insert optimised for? The CPMT080202 AT9530 insert is optimised for finishing and light turning of Stahl, where the AT9530 coated cermet promotes surface quality and consistent wear. Which holder types are compatible with this insert? Compatibility is determined by form, free angle, tolerance class, fastening method, size and thickness; the rhombic CPMT geometry is compatible with standard CPMT indexable turning holders designed for ISO forms. How does the AT9530 coating influence tool life? The AT9530 coating on the cermet substrate reduces adhesion and stabilises flank wear, which often leads to more predictable edge life for finishing passes with the CPMT080202 insert. Is the insert suitable for internal turning or boring operations? Yes, the insert’s geometry and secure centre bore fixing enable use in both external and internal turning applications when used with an appropriate holder or boring bar. Which chipbreaker should be chosen for mixed stability setups? For setups with limited rigidity, a chipbreaker designed for more robust chip control is recommended; the single-sided chipbreaker on this insert provides good control in stable finishing conditions, while alternative chipbreakers may be chosen for variable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080202 GT9530 Wendeplatten - Tungaloy
Taking advantage of the coated cermet GT9530 and the 80° rhombic geometry, this insert is designed to deliver consistent surface quality and extended tool life in stable turning operations. Combined with its single-sided chipbreaker and ISO conformity, it supports efficient finishing and light universal turning of steel. Order directly via Metav Werkzeuge or consult our specialists for application support. CPMT 080202 GT9530 Tungaloy indexable insert for turning, coated cermet, rhombic 80° A CPMT080202 GT9530 ISO-indexable insert engineered for finishing and light universal turning of steel, offering wear-resistant performance and reliable chip control Coated cermet grade GT9530 Rhombic insert, 80° geometry Single-sided chipbreaker design Cylindrical hole with 40°–60° countersink 11° clearance angle, 0.2 mm corner radius Consistent finishes with wear-resistant cermet The coated cermet composition and the GT9530 grade prioritise wear resistance and improved surface finish when machining steel under stable conditions. Cermet inserts combine a hard ceramic phase with a metal binder to resist abrasive wear while providing fine cutting edges that sustain profile quality over longer cutting intervals. For shops seeking fewer interruptions and reduced rework, the hardened edge life translates directly into steadier part tolerances and lower overall cycle time. The result is a predictable finishing performance that supports quality-critical turning operations. Clear mounting and geometry for reliable compatibility Compatibility with holders is established by form, clearance angle 11°, tolerance class, fastening, size and thickness; the 80° rhombic shape and cylindrical hole with single-sided countersink (40°–60°) make the insert straightforward to seat and secure. The 0.2 mm corner radius produces a controlled edge for fine finishes, while the 2.38 mm plate thickness contributes to rigidity in light to moderate cutting conditions. Because these parameters follow ISO conventions, selection for existing toolholders is simplified: match the geometry, thickness and hole style to the clamping system to ensure repeatable seating and consistent cutting behaviour. Practical guidance for turning processes and chip control Designed for external and internal turning, the insert features a single-sided chipbreaker suitable for finishing to light general-purpose operations on steel; selecting the correct chipbreaker and grade according to workpiece stability will maximise stability and tool life. The carbide substrate provides a balance of edge toughness and thermal resistance, enabling steady performance during continuous cuts. In practice, the combination of coated cermet, precise geometry and the ISO-standard form reduces vibration sensitivity and improves surface integrity, resulting in fewer finishing passes and better throughput in production environments. For application advice on Tungaloy cermet inserts and to check current availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998317 SKU: 6998317-Tungaloy Model series: ISO turning indexable inserts ISO designation: CPMT080202 Manufacturer: Tungaloy Facts Geometry: 80° Clearance angle: 11° Plate thickness: 2.38 mm Corner radius: 0.2 mm Plate size: 08 Special features Coating/grade: GT9530 (coated cermet) Carbide substrate Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) Rhombic plate form Application: Turning (external and internal) FAQ What materials is this insert suitable for machining? The CPMT080202 GT9530 insert is optimised for machining steel; the GT9530 coated cermet offers wear resistance and a fine cutting edge suitable for finishing and light universal turning of steel. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) provides secure seating in compatible holders, ensuring repeatable clamping and stable cutting behaviour for the Tungaloy indexable insert. Which geometry should be matched when selecting a holder? Choose a holder that accepts the 80° rhombic form with matching thickness and tolerance class; alignment of these parameters guarantees correct seating and optimal cutting performance. What benefits does the GT9530 grade deliver in production? GT9530 combines a coated cermet surface with a carbide substrate to extend lifetime under stable cutting conditions, improving surface quality and reducing the need for secondary finishing. Can this insert be used for internal turning operations? Yes, the insert is suitable for internal turning as well as external turning; the single-sided chipbreaker supports controlled chip formation in both applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet cutting edge, 0.2 mm corner radius and ISO compatibility for consistent finishing results; order the insert directly via Metav Werkzeuge or consult our specialists if further technical guidance is required. CPMT 080202 NS9530 indexable insert for turning by Tungaloy — uncoated cermet, rhombic 80° geometry CPMT080202 NS9530 Tungaloy insert is an ISO‑standard indexable insert designed for precision turning and finishing of steel components, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. Sharp uncoated cermet cutting edge Optimised for fine finishing on steel Rhombic 80° geometry, 0.2 mm radius Cylindrical hole with 40°–60° countersink Consistent surface quality through a finishing‑oriented grade The NS9530 grade is an uncoated cermet designed specifically for finishing operations on steel. Its inherently sharp edge and low cutting resistance produce high surface quality even at small feed and depth settings. Because the grade targets continuous cutting, it helps to reduce vibration and maintain a steady tool‑workpiece interaction, which leads to reproducible part quality and fewer rework cycles. This makes the insert particularly suitable where surface integrity and tight tolerances are required. Geometry and ISO compatibility for reliable clamping The rhombic 80° geometry combined with a 0.2 mm radius and 11° clearance supports stable engagement and predictable cutting forces. The insert follows ISO designation CPMT080202, so compatibility with ISO holders is governed by form, clearance angle, tolerance class, fixation method, size and thickness. Choosing holders matched to these parameters ensures correct seat and clamp pressure, minimising chatter and enabling repeatable tool changes without additional adjustment. Practical application: efficient finishing on steel For turning operations that prioritise finish, the single‑sided chipbreaker is adapted to small depths of cut and continuous feeds, helping to control chip flow and avoid surface disturbance. The insert’s characteristics translate to fewer passes to achieve the target finish and a reduced need for secondary polishing. When machining steel in finishing passes, select cutting values that favour the grade’s strengths—moderate cutting speed with low feed—to exploit the sharp uncoated edge and obtain consistent results. Material behaviour and tool life considerations Manufactured from a wear‑resistant carbide substrate and specified as an uncoated cermet, the insert balances a keen cutting edge with stable wear behaviour for finishing tasks. Cermet grades like NS9530 offer excellent surface finish potential and low built‑up edge tendency; however, their best performance appears under steady cutting conditions and with appropriate cutting data. Monitoring tool condition and using optimised feeds will extend useful life and maintain the desired component finish. Contact Metav Werkzeuge for tailored advice on selecting compatible holders and securing the CPMT080202 NS9530 Tungaloy insert; technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6998454 Manufacturer SKU: TUN6998454 SKU: 6998454-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.2 mm Insert thickness: 2.38 mm Insert size: 08 Main angle: 80° Clearance angle: 11° Special features Grade: NS9530 (uncoated cermet) Geometry: rhombic, single-sided chipbreaker Hole: with cylindrical hole + single-side countersink (40°–60°) Recommended for: turning, finishing on steel Material: carbide ISO designation: CPMT080202 FAQ What is the primary application for this insert? The CPMT080202 NS9530 Tungaloy insert (SKU 6998454-Tungaloy) is intended for turning, with a focus on finishing operations on steel where a fine surface is required. How does the single‑sided chipbreaker affect machining? The single‑sided chipbreaker on this NS9530 grade promotes controlled chip formation during continuous cuts and small depths of cut, improving chip evacuation and surface consistency when using the CPMT080202 indexable insert. Which holders are compatible with the insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fixation and size; use holders designed for the ISO CPMT080202 geometry to ensure correct seating and clamping for the Tungaloy finishing insert. What cutting data should be prioritised for best surface finish? Prioritise moderate cutting speeds and low feeds for finishing with the NS9530 uncoated cermet; these settings reduce cutting forces and exploit the insert’s sharp edge for improved surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080202 T6215 Wendeplatten - Tungaloy
High wear resistance from the CVD-coated carbide grade T6215 combined with the 80° rhombic form and 11° relief ensures reliable stainless-steel turning under stable to lightly interrupted conditions; order directly via Metav Werkzeuge or request consultation from their specialists. CPMT 080202 T6215 ISO turning insert — rhombic 80° for turning, by Tungaloy A CPMT080202 T6215 indexable turning insert designed for stable to lightly interrupted stainless-steel machining. CVD-coated carbide grade T6215 Optimised for stainless steel turning 80° rhombic form with 11° relief Cylindrical hole with single-side countersink Consistent wear resistance for higher productivity The combination of a CVD-coated surface and a carbide substrate delivers improved wear resistance and thermal stability during longer turning cycles. This results in fewer tool changes and more predictable tool life when machining stainless steel, supporting continuous production runs. The ISO-series construction provides a standardised basis for matching to a wide range of toolholders, enabling a stable cutting setup that contributes to reduced downtime and consistent part quality. Precision geometry for secure clamping and predictable chip control The rhombic 80° shape, together with the 11° relief, promotes a robust cutting edge and reliable seating in compatible holders; the geometry reduces the risk of edge chipping under moderate loads. The 0.2 mm corner radius and 2.38 mm thickness improve strength at the edge while the cylindrical hole with single-side countersink ensures repeatable clamping with common ISO-style screws and clamping sets. Built-in one-sided chipbreaker geometry aids chip control and evacuation, which is particularly beneficial where short, controllable chips are required. Coating and grade engineered for stainless-steel applications The insert’s grade T6215 pairs a tough carbide body with a CVD-coated surface to resist adhesive wear and maintain edge integrity when cutting stainless steels. Compared with uncoated grades, this configuration reduces built-up edge formation and preserves surface finish under the typical temperatures of stainless-steel turning. The coating also enhances resistance to the chemical affinity of stainless alloys, extending useful tool life in stable to lightly interrupted cutting conditions. Versatile use in external and internal turning operations Designed for both external and internal turning, the ISO-format insert integrates into common turning systems when the holder form, relief angle, tolerance class, fastening and size are matched. Selection of the appropriate chipbreaker and grade should be based on workpiece material, machining strategy and machine stability to obtain the best balance of surface finish and productivity. For setups that demand consistent repeatability and straightforward insert indexing, this series provides an economical, performance-oriented option. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy CPMT080202 T6215 indexable insert into production and to arrange supply or technical matching: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6903086 SKU: 6903086-Tungaloy Manufacturer SKU: TUN6903086 Model series: ISO turning indexable inserts Material: carbide Designation: CPMT080202 Facts Insert size: 08 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Main angle: 80° Special features Grade: T6215 (CVD-coated) Shape: rhombic Hole: with cylindrical hole and single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning Compatible system: ISO turning insert system FAQ Which materials is this insert intended for? The CPMT080202 T6215 insert is specified for machining stainless steels; the T6215 grade and CVD-coated surface are optimised for that material family. Can the insert cope with lightly interrupted cuts? Yes. The insert grade and geometry of the CPMT080202 T6215 are designed to perform reliably under stable to slightly interrupted cutting conditions. What clamping features are required for proper seating? Secure seating requires a matching holder form and an ISO-compatible clamping set; the insert features a cylindrical hole with single-side countersink to ensure repeatable fastening. How does the chipbreaker influence machining performance? The one-sided chipbreaker controls chip formation and evacuation, improving surface finish and reducing the risk of entanglement in typical stainless-steel turning operations. Is this insert suitable for internal turning as well as external turning? Yes. The ISO-format design and rhombic form make the insert suitable for both external and internal turning when combined with appropriate holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080202 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture-safe performance and ISO-compatible geometry to maintain stable, productive turning operations; order the insert directly via Metav Werkzeuge or consult our team for application advice. CPMT080202 T9215 CPMT ISO 080202 T9215 — Turning insert for medium steel by Tungaloy CPMT080202 T9215 is an ISO-standard rhombic turning insert engineered for general external and internal turning in medium steel, offering a balance of wear resistance and toughness for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 80° rhombic geometry for versatile turning 0.2 mm corner radius for fine profiling Single-sided chipbreaker for controlled swarf Consistent productivity through robust grade and coating The combination of a CVD-coated carbide substrate and the T9215 grade delivers high wear resistance while retaining fracture safety, making the insert particularly suited to medium steel machining where long running times and consistent part quality are required. The coating reduces adhesive wear and thermal degradation during continuous cuts; in practical terms this means fewer insert changes, less downtime and improved component throughput. Operators benefit from predictable tool life when cutting with stable setups under recommended parameters. Stable geometry and precise dimensional control for reliable fits Designed to the ISO standard and presented in a rhombic 80° shape with an 11° relief angle, the insert ensures repeatable seating and orientation in compatible toolholders. The with-hole design includes a cylindrical bore and a one-sided countersink (40°–60°), supporting secure clamping and straightforward screw retention. Compatibility with a holder is defined by form, relief angle, tolerance class, fastening method, size and thickness; this predictability simplifies procurement and reduces the risk of incorrect tooling combinations in production. Optimised cutting edge and chip control for better surface finish The 0.2 mm corner radius and single-sided chipbreaker are set up to produce reliable swarf formation and good surface quality on medium-strength steels. The chipbreaker geometry moderates chip flow and heat generation, which in turn helps achieve consistent component finish and dimensional stability. For less experienced users: a chipbreaker shapes chips to avoid entanglement and assists coolant access, while the small corner radius supports detailed profiling and reduced cutting forces in finishing passes. For reliable, high-productivity turning with Tungaloy quality, contact Metav Werkzeuge for tailored recommendations or to place an order — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774031 Manufacturer SKU: TUN6774031 SKU: 6774031-Tungaloy Manufacturer: Tungaloy Model series: ISO turning inserts Intended application: Turning Core specifications Geometry angle: 80° Relief angle: 11° Thickness: 2.38 mm Size: 08 Corner radius: 0.2 mm Special features Material: carbide Coating/grade: T9215 (CVD-coated carbide) Shape: rhombic Hole style: with cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: single-sided Suitable for: continuous to slightly interrupted cuts on medium steel ISO-standard insert FAQ What steels are best processed with this insert? The CPMT080202 T9215 insert is optimised for medium steel; the T9215 grade provides a balance of wear resistance and toughness suited to this material group. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) allows secure screw retention and consistent seating in compatible ISO toolholders, improving repeatability during index changes. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius enables finer profiling and lower cutting forces in finishing passes, which supports improved surface quality on turned parts. Can the insert handle interrupted cuts? Yes; the grade and geometry are suitable for continuous through to slightly interrupted cuts, offering a compromise between toughness and wear resistance for such conditions. Why choose a CVD coating like the T9215 grade? The CVD coating of the T9215 grade enhances heat and wear resistance while maintaining fracture-safe behaviour, leading to longer tool life and stable machining performance under typical turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080202 T9225 Wendeplatten - Tungaloy
High-performance CVD-coated carbide and a compact ISO geometry combine to deliver consistent, robust turning results for medium to heavy steel work; the insert’s 0.2 mm corner radius and single-sided chipbreaker support stable chip control and improved surface finish. Order the CPMT080202 T9225 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 080202 T9225 indexable insert for turning — Tungaloy CPMT 080202 T9225 is an ISO rhombic indexable insert designed for versatile external and internal turning in industrial steel applications CVD-coated carbide grade T9225 ISO rhombic insert CPMT 08 Single-sided chipbreaker for stable chips 11° clearance and 0.2 mm corner radius Consistent tool life through a robust universal grade The T9225 grade is a CVD-coated carbide developed for robust, universal performance in medium to heavy steel turning. Its coating improves wear resistance on the cutting edge while maintaining the toughness required for slightly interrupted cuts and varying engagement conditions. The result is longer edge life and fewer tool changes, which reduces process interruptions and supports predictable production planning. For operations prioritising uptime, this balance of hardness and toughness translates directly into steady cycle times and dependable finishing quality. Fast set-up and broad ISO compatibility for toolroom flexibility The CPMT geometry follows the ISO standard for rhombic 08 inserts, which simplifies holder selection and interchangeability. Compatibility with a holder depends on form, clearance angle (11°), tolerance class, attachment method, size and thickness; the insert’s 2.38 mm thickness and 80° orientation ensure a secure seating in matching CPMT holders. The plate also incorporates a cylindrical hole with a single-sided countersink (40°–60°), enabling straightforward clamping with standard screws and shims. These features reduce set-up time and inventory complexity while keeping the workholding reliable under production loads. Improved process stability and surface quality A modest 0.2 mm corner radius together with the single-sided chipbreaker supports controlled chip formation and a robust cutting edge, helping to damp vibrations during heavier cuts. The insert’s geometry and grade are optimised to maintain a stable cutting edge under fluctuating cut depths, which enhances surface finish and reduces the risk of edge chipping. Explaining the term: a chipbreaker is a machined groove on the insert face that helps form and direct chips away from the cutting zone, reducing re-cutting and improving thermal distribution at the cutting edge—both beneficial for consistent part quality. Practical guidance on selection and application The ISO insert is intended for external and internal turning; when selecting a cutting system, match the chipbreaker and grade to the workpiece material, machining type and machine/tooling stability. For example, the T9225 grade is suited to steels where occasional interrupted cuts occur; for continuous, high-speed finishing a different grade or finer radius might be chosen. The basic system comprises the insert, a compatible external holder or boring bar, a shim/clamping set and replacement screws. Where uncertainties arise about holder fitment or process parameters, consult technical documentation or the supplier’s application notes to ensure correct pairing and set-up. Contact Metav Werkzeuge for tailored application advice on the CPMT 080202 T9225 indexable insert from Tungaloy — specialists will recommend the optimal holder and process parameters for the intended steel application and production conditions. Technical data Article number: 6781031 Manufacturer SKU: TUN6781031 SKU: 6781031-Tungaloy Designation: CPMT080202 T9225 Tungaloy indexable insert Model series: ISO turning indexable inserts Facts Shape: rhombic (08) Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 11° Insert angle: 80° Hole: with cylindrical hole and one-sided countersink (40°–60°) Special features Material: carbide Coating: CVD coating (T9225) Chipbreaker: single-sided Application: external and internal turning Compatible system: ISO CPMT holders, shim/clamping set and replacement screws FAQ What materials is this insert best suited for? The CPMT 080202 T9225 indexable insert is optimised for medium to heavy steel turning and performs well when interrupted cuts demand additional toughness. Which dimensions should be checked for holder compatibility? Check shape (CPMT), size (08), thickness (2.38 mm), corner radius (0.2 mm), clearance angle (11°) and the hole/countersink configuration to ensure correct seating and clamping. How does the T9225 coating benefit machining? The CVD coating on the T9225 grade increases wear resistance and temperature tolerance at the cutting edge, extending tool life while maintaining toughness for variable cutting conditions. Is the insert suitable for internal as well as external turning? Yes, the ISO rhombic form and available hole/countersink configuration allow use in both external and internal turning setups when paired with the appropriate holder. How should the chipbreaker be chosen for a job? Select the chipbreaker according to workpiece material, depth of cut and machine stability; the single-sided chipbreaker on this insert promotes stable chip control in heavier steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH6225 carbide grade, a sharp yet stable cutting edge and the ISO CPMT080204 geometry for dependable stainless steel turning; order the CPMT080204 AH6225 Tungaloy indexable insert directly via Metav Werkzeuge or consult our advisors for tool selection. CPMT080204 AH6225 Tungaloy indexable insert — Turning, ISO CPMT geometry A CPMT080204 AH6225 indexable turning insert engineered for external and internal turning of stainless steel, featuring a rhombic form, 11° relief and a 0.4 mm nose radius for versatile medium machining. PVD-coated AH6225 carbide grade ISO CPMT geometry for holder compatibility 0.4 mm nose radius for versatile finishing Single-sided chipbreaker for stainless steel Consistent, economical performance in stainless steel turning The PVD‑coated AH6225 grade combines a sharp cutting edge with edge stability suited to variable workshop conditions, delivering a balanced mix of wear resistance and toughness. This makes the insert especially effective when machining stainless steel in medium cutting regimes, where repeated tool life and surface quality are priorities. The coated cemented carbide substrate reduces flank wear and stabilises cutting forces, which supports longer uninterrupted cycles and more predictable tool change intervals, improving process efficiency on production and jobbing lathes. Secure clamping and ISO compatibility for predictable set‑ups The ISO CPMT080204 geometry ensures compatibility with standard CPMT holders; the plate form, relief angle and tolerance class are matched to the holder family to provide repeatable clamping and concentricity. The insert features a central hole with a cylindrical bore and a single‑sided countersink (40°–60°), enabling robust fixation with the usual screw-and-seat systems. With a plate thickness of 2.38 mm and a rhombic shape, the component offers stable seating, reduced vibration and consistent chip control—factors that directly affect surface finish and tool life. Machining benefits and practical application advice The single‑sided chipbreaker designed for this grade aids chip formation when turning ferritic and austenitic stainless steels, reducing built‑up edge and improving evacuation. The modest 0.4 mm nose radius allows better control of surface finish without excessive cutting forces, while the 11° relief minimises rubbing on the flank. For best results, choose feeds and speeds matched to the grade’s medium‑duty range and pair the insert with a rigid toolholder and stable workpiece clamping; this combination yields consistent dimensional accuracy and reduces the risk of chatter. The insert supports both external and internal turning operations when matched with the appropriate holder and set‑up. Contact Metav Werkzeuge for personalised advice on applying the Tungaloy CPMT080204 AH6225 insert and to arrange next‑day supply tailored to machining requirements Technical data Designation: CPMT080204 AH6225 Manufacturer: Tungaloy Manufacturer article number: 6903271 SKU: 6903271-Tungaloy Facts Size designation: 08 Plate thickness: 2.38 mm Nose radius: 0.4 mm Included angle: 80° Relief angle: 11° Special features PVD-coated carbide grade AH6225 Rhombic plate form Single-sided chipbreaker Central hole with cylindrical bore and single-sided countersink (40°–60°) Intended application: turning; suitable for stainless steel System components: ISO turning insert, compatible external holder or boring bar, seat/locking set and replacement screws FAQ What materials is this insert designed for? The CPMT080204 AH6225 insert is specified as a universal grade for stainless steel, optimised for medium machining with a balance of edge sharpness and stability. Which toolholders fit this insert? The ISO CPMT080204 geometry matches standard CPMT turning holders and boring bars; compatibility depends on holder form, relief, tolerance class, fastening and plate size. What is the purpose of the single‑sided chipbreaker? The single‑sided chipbreaker on this Tungaloy insert promotes controlled chip formation when turning stainless steels, helping to avoid built‑up edge and easing chip evacuation. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius gives a compromise between surface quality and cutting force; it enables improved finishing without excessive tool load when using appropriate feeds. Is the insert supplied with screws or a clamping set? The CPMT080204 AH6225 insert is supplied as the indexable plate itself; holders, underlay/locking sets and replacement screws form the system and should be procured separately. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade, a sharp yet stable cutting edge, and ISO compatibility for consistent stainless-steel turning. Order the CPMT080204 insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. CPMT080204 AH6225 ISO indexable turning insert – PVD-coated carbide, 80° rhombic by Tungaloy The CPMT080204 AH6225 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for stainless-steel machining with a balanced edge for medium cutting conditions PVD-coated carbide grade AH6225 Sharp yet durable cutting edge 80° rhombic shape, 0.4 mm radius Cylindrical hole with countersink 40°–60° Reliable edge performance for consistent cycle times The combination of a PVD-coated surface and a carbide substrate delivers a measurable improvement in edge life and process stability. The AH6225 grade was developed for a sharp yet stable cutting edge, which reduces rework frequency and maintains surface finish at medium cutting parameters. This translates to fewer tool changes, steadier cycle times and lower indirect production costs through improved uptime and predictable wear behaviour. Wide applicability and predictable chip control A universal grade tailored for stainless steels and a dedicated single-sided chipbreaker ensure consistent chip formation across typical turning operations. The one-sided chip pocket supports controlled chip flow during both external and internal turning, reducing the risk of entanglement and clamp interference. Choosing this insert helps standardise tooling across a range of stainless alloys, simplifying inventory while maintaining process reliability. Straightforward fitment and quick changeover for workshop efficiency The insert follows ISO indexation and dimensioning, which simplifies holder selection and ensures repeatable clamping. The rhombic geometry with an 80° included angle and 0.4 mm corner radius provides a balance between rigidity and finish capability, while the 2.38 mm thickness offers adequate support for medium depths of cut. The insert’s cylindrical hole with single-sided countersink (40°–60°) enables secure fastening and predictable seating, shortening set-up times and reducing restart risks after indexing. Contact Metav Werkzeuge today for availability and application guidance for Tungaloy AH6225 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical support and ordering Technical data Article number: 6903274 SKU: 6903274-Tungaloy Manufacturer SKU: TUN6903274 Model series: ISO turning inserts Facts Corner radius: 0.4 mm Included angle: 80° Relief angle: 11° Thickness: 2.38 mm Size: 08 Special features Grade: AH6225 (PVD-coated) Material: carbide Shape: rhombic Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning Series: ISO turning inserts FAQ Is this insert suitable for stainless-steel turning? Yes. The CPMT080204 AH6225 Tungaloy indexable turning insert (SKU 6903274-Tungaloy) uses the AH6225 PVD-coated carbide grade, which is formulated for reliable performance on stainless steels in medium cutting conditions. How does the chip control perform in interrupted cuts? The single-sided chipbreaker on the insert supports stable chip formation and evacuation; the CPMT080204 geometry helps maintain control during both continuous and mildly interrupted turning operations. What clamping features ensure correct seating of the insert? The insert has a cylindrical hole with a single-sided countersink (40°–60°) to match ISO holders; this provides consistent seating and secure fastening for repeatable indexation. Is the corner radius suitable for finishing passes? The 0.4 mm corner radius on this rhombic insert offers a compromise between strength and surface finish, making it suitable for general-purpose finishing and medium turning tasks. Can the CPMT080204 be used for internal and external turning? Yes. The ISO dimensioning and rhombic 80° geometry make the insert compatible with appropriately specified external holders and boring bars for internal turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 AH6235 Wendeplatten - Tungaloy
Take advantage of a combination of ISO‑standard geometry, a PVD‑coated carbide grade engineered for stainless steel, and secure clamping features for reliable turning performance; order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge specialists for application advice. CPMT080204 AH6235 indexable turning insert, PVD‑coated carbide, for stainless steel — Tungaloy The CPMT080204 AH6235 is an ISO‑standard indexable insert developed for external and internal turning, offering a rhombic form with an 80° included angle and a grade tuned to interrupted cuts and high chipping risk. ISO‑standard rhombic insert, 80° included angle PVD‑coated carbide grade AH6235 for stainless steel Cylindrical hole with single‑side countersink One‑sided chipbreaker for controlled chips Predictable mounting and system compatibility for efficient production The ISO‑format design ensures that the insert is compatible with a wide range of external holders and boring bars when matched by form, relief angle, tolerance class, clamping and nominal size. This standardisation reduces setup time and supports repeatable seating and clamping; as a result, tool changeovers are simplified and process stability is improved. The insert’s secure fastening is supported by a cylindrical hole with single‑side countersink (40°–60°), which helps to centre the component reliably and maintain cutting geometry under load. Tough, PVD‑coated carbide grade for difficult stainless‑steel operations The carbide grade AH6235, supplied as a PVD‑coated grade, is formulated for tougher behaviour and enhanced edge security when machining stainless steel or when processing with interrupted cuts. The PVD layer increases wear resistance and maintains a sharper flank for longer, which leads to fewer edge failures and a more consistent surface finish. For customers seeking higher process reliability in challenging materials, this combination of substrate and coating provides a balance between resistance to built‑up edge and sufficient toughness to resist chipping. Geometry tailored to versatility in turning and simple handling The insert’s rhombic shape with an 80° included angle, a 0.4 mm corner radius and an 11° clearance angle gives a versatile contact geometry that supports both roughing and finishing passes depending on the chosen holder and cutting parameters. The plate thickness of 2.38 mm contributes to stiffness at the cutting edge while keeping indexable rotations straightforward. The single‑sided chipbreaker is designed to control chip form in many turning setups, lowering the risk of entanglement and facilitating safer, cleaner machining. Replacement is part of a system: the insert works within a set‑up comprising holder, shim and clamping screw specified to the ISO family. For reliable stainless‑steel turning with enhanced edge stability, request the Tungaloy CPMT080204 AH6235 indexable inserts from Metav Werkzeuge or contact the Metav Werkzeuge application team for tailored recommendations. Technical data Article number: 6903458 SKU: 6903458-Tungaloy Manufacturer SKU: TUN6903458 Series: ISO indexable turning inserts Designation: CPMT080204 AH6235 Tungaloy‑insert Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Size designation: 08 Relief/clearance angle: 11° Included angle: 80° Hole: with hole Plate form: rhombic Special features Grade: AH6235 (PVD‑coated carbide) Suitable for: stainless steel, interrupted cuts, high chipping risk Chipbreaker: one‑sided Hole style: cylindrical hole + single‑side countersink (40°–60°) Typical system: ISO insert, compatible external holder or boring bar, shim/clamping set and replacement screws FAQ What holders are compatible with this insert? Compatibility is determined by ISO form, clearance angle, tolerance class, clamping method, nominal size and plate thickness; the CPMT080204 AH6235 insert fits ISO‑compliant external holders and boring bars when these parameters match. Is this grade suitable for continuous stainless‑steel turning? The AH6235 grade is formulated for tougher performance and is especially effective where chipping risk or interrupted cuts occur; in continuous stainless‑steel operations it provides improved edge stability and wear resistance. What does the hole style mean for mounting? The cylindrical hole with a single‑side countersink (40°–60°) enables reliable centring and secure clamping, reducing play and supporting consistent cutting geometry under load. Which machining tasks benefit most from the 0.4 mm corner radius? A 0.4 mm corner radius balances strength and finish: it increases edge robustness for roughing while still permitting acceptable surface integrity for semi‑finishing passes on challenging materials. Can the insert be indexed for multiple edges and what is the SKU for ordering? Yes, the insert is indexable by rotating to unused cutting edges; order reference for the CPMT080204 AH6235 Tungaloy indexable insert is SKU 6903458‑Tungaloy (manufacturer article number 6903458). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 080204 AH6235 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH6235 grade that resists chipping in interrupted cuts and a CPMT rhombic geometry that offers stable clamping and predictable chip flow; order directly via Metav Werkzeuge or request application guidance from our consultants. CPMT 080204 AH6235 ISO turning insert for external and internal turning — Tungaloy CPMT080204 AH6235 is an ISO-format rhombic insert designed for robust turning operations, optimised for stainless-steel workpieces and interrupted cuts PVD-coated AH6235 for stainless steel Rhombic CPMT form, 80° included angle 0.4 mm corner radius for fine finishing With hole and single-side countersink 40°–60° Optimised grade for demanding stainless-steel turning The AH6235 grade is a PVD-coated carbide specifically developed for tougher machining conditions, such as stainless steel and interrupted cuts. The coating reduces built-up edge and improves heat resistance, which translates into longer tool life and fewer unplanned tool changes. In practice, this means a more consistent cutting action and reduced part-to-part variation when machining corrosive or work-hardening alloys. The tougher substrate paired with the surface treatment helps prevent edge breakouts in unstable conditions, offering a measurable gain in process reliability. Stable cutting geometry for precision and repeatability The rhombic CPMT geometry with an 80° included angle and 0.4 mm corner radius delivers a balanced mix of strength and surface finish. The 11° relief angle and 2.38 mm plate thickness provide sufficient support under load, while the central hole with cylindrical bore and one-sided countersink (40°–60°) ensures secure clamping in ISO-compliant holders. Together these features reduce vibration and promote a consistent chip formation, resulting in improved dimensional accuracy and extended insert life. The clear geometry also simplifies set-up checks and repeatable index changes during production. System-level compatibility and practical selection advice As an ISO turning insert, this component is intended to be used with a matching external holder or boring bar, plus the corresponding shim/clamp and fastening screws. Compatibility is governed by insert form, relief angle, tolerance class, fixation style, size and thickness, so selection should match the holder specification. Choose the one-sided chipbreaker style and the AH6235 grade when machining stainless steel or when facing a high risk of edge breakout; for other materials, select an alternative chipformer and grade optimised for the substrate. This approach minimises downtime and supports a productive machining workflow with consistent surface quality. For precise application advice or to secure supply of the Tungaloy AH6235 CPMT080204 insert, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6903454 SKU: 6903454-Tungaloy Designation: CPMT080204 AH6235 Material: Carbide Coating: PVD Core specifications Insert size: 08 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 80° Hole style: with hole; cylindrical hole + single-side countersink (40°–60°) Special features Rhombic insert shape One-sided chipbreaker Suitable for external and internal turning Grade AH6235 for stainless steel and interrupted cuts ISO-compliant turning insert Compatibility depends on holder form, relief, tolerance class, fixation, size and thickness FAQ What materials is this insert best suited for? The AH6235 grade is formulated for stainless steel and applications with interrupted cuts, so the CPMT080204 insert performs well where toughness and chipping resistance are required. Which holder features are required for secure clamping? Secure clamping requires a holder compatible with the CPMT form, matching relief angle, correct tolerance class, appropriate fixation method and support for a 2.38 mm thick insert with the central hole and countersink. Can the insert be used for finishing operations? Yes; with a 0.4 mm corner radius the insert can achieve good surface finishes, provided cutting parameters and holder rigidity are adapted for finishing passes. How does the PVD coating benefit production? The PVD coating on the AH6235 grade improves heat resistance and reduces built-up edge, resulting in longer insert life and more consistent machining performance under demanding conditions. Is this an ISO-standard insert and how does that help? Yes, the CPMT080204 is ISO-compliant; this ensures interchangeability with standard holders and simplifies tool management across machines. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 AH725 Wendeplatten - Tungaloy
Secure process reliability with the PVD‑coated AH725 grade and a precise 0.4 mm corner radius for consistent finishing; the ISO‑standard rhombic geometry and 11° clearance guarantee straightforward tool selection and repeatable seating. Order the insert directly via Metav Werkzeuge or consult our technical team for application advice. CPMT080204 AH725 turning insert — ISO rhombic insert for turning, PVD‑coated, 0.4 mm radius, Tungaloy A CPMT080204 AH725 turning insert for external and internal turning operations, delivering universal, break‑resistant performance on steel and stainless steels with a cylindrical hole and single‑sided countersink. ISO‑standard rhombic insert, size 08 PVD‑coated cemented carbide AH725 grade 0.4 mm corner radius for finish turning Cylindrical hole with countersink 40°–60° Consistent finishing and process stability for mixed materials The CPMT080204 AH725 Tungaloy turning insert combines a PVD‑coated surface with a cemented carbide substrate to deliver stable cutting behaviour across varying steels. The AH725 grade is engineered as a universal, break‑resistant option that reduces the risk of edge chipping when batch materials change. The 0.4 mm corner radius helps achieve improved surface finish on light to medium cuts while maintaining acceptable strength at the cutting edge. In practice, this means fewer unplanned tool changes and more predictable cycle times on short to medium runs. Clear compatibility and reliable clamping for quick integration The rhomboid geometry and standard ISO designation simplify toolholder selection: compatibility depends on insert form, 11° clearance, tolerance class, fastening and thickness, all of which are adhered to by this series. The 2.38 mm thickness and rhombic shape provide stable seating; the cylindrical hole with single‑sided countersink (40°–60°) ensures secure fixation and repeatable positioning. For system setup, use a matching external holder or boring bar, plus backing pads and clamping sets as required. If clarification is needed on holder fitment or tolerance class, Metav Werkzeuge can supply technical drawings and advice by email or phone. Enhanced productivity through chip control and reliable edge life Designed with a one‑sided chipbreaker, this insert improves chip control and evacuation in standard turning operations, lowering the likelihood of built‑up edge and surface defects. The combination of the chipbreaker geometry and the AH725 grade delivers elevated process security for smaller tools and variable workloads, which is particularly valuable in jobbing shops and mixed‑material production lines. The result is consistent part quality and longer effective tool life, contributing to more efficient workstations and lower total machining interruptions. For application guidance on the Tungaloy CPMT080204 AH725 turning insert and rapid availability from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856772 Manufacturer SKU: TUN6856772 Brand: Tungaloy Facts Corner radius: 0.4 mm Clearance angle: 11° Insert thickness: 2.38 mm Insert size: 08 Hole: with hole Special features PVD‑coated cemented carbide (AH725) Rhomboid insert, 80° included angle One‑sided chipbreaker Cylindrical hole with single‑sided countersink (40°–60°) ISO‑standard turning insert FAQ What materials is this insert suitable for? The CPMT080204 AH725 Tungaloy turning insert (SKU TUN6856772) is specified for a broad range of steels and stainless steels; the AH725 grade is optimised for break resistance and reliable edge life when facing varying workpiece materials. Which turning operations suit this geometry? External and internal turning are the intended applications; the rhombic shape with a 0.4 mm corner radius favours finish and light‑to‑medium turning tasks where controlled chip flow is required. How is the insert secured in the toolholder? Compatibility is determined by insert form, clearance, tolerance class, fastening, size and thickness. The CPMT080204 uses a cylindrical hole with a single‑sided countersink (40°–60°) to ensure repeatable seating and reliable clamping. What benefits does the AH725 grade deliver on the shop floor? The AH725 PVD‑coated cemented carbide offers balanced wear resistance and fracture toughness, improving process security, reducing edge chipping and enabling consistent component quality across mixed batches. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 AH725 Wendeplatten - Tungaloy
Combining a PVD-coated carbide AH725 grade with a precise 80° rhombic geometry and a 0.4 mm corner radius ensures secure chip control and reliable edge life for mixed-material turning operations; order the CPMT080204 AH725 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 080204 AH725 — Tungaloy ISO turning insert, 80° rhombic, PVD-coated carbide The CPMT080204 AH725 is an ISO-format turning insert engineered for external and internal turning, delivering fracture-resistant performance and consistent chip control in demanding production environments ISO rhombic insert CPMT 080204, 80° PVD-coated carbide AH725 for steel & stainless Single-sided chipbreaker for consistent chips With cylindrical hole and 40°–60° countersink High-process security through material and coating Designed for secure, productive turning applications, the CPMT080204 AH725 combines a PVD-coated carbide substrate with a fracture-resistant composition optimised for a wide range of steels and stainless steels. As a universal grade, AH725 offers a balanced compromise between toughness and wear resistance, making it particularly suitable for mixed-material production and smaller tooling where process security is critical. The outcome is stable chip formation, extended edge life and fewer insert changes, which supports continuous operation and reduces unplanned downtime. Geometry that stabilises cutting and improves finish The rhombic 80° profile with a 0.4 mm corner radius provides a robust entry geometry that maintains edge strength while enabling precise cutting engagement for external and internal turning. The single-sided chipbreaker is tuned to direct chips consistently, lowering the risk of jamming and reducing secondary operations. Combined with an 11° relief and a plate thickness of 2.38 mm, the geometry enhances mechanical rigidity, permitting more predictable feeds and improved surface quality with reduced chatter on less rigid setups. ISO standardisation and system-level advantages The insert adheres to ISO conventions for form and size, which simplifies selection and replacement in standard turning tool systems. The integrated cylindrical hole with 40°–60° countersink ensures secure clamping and repeatable positioning in compatible holders, while the rhombic shape allows flexible approach angles for a range of turning tasks. When paired with the correct external holder, clamping set and replacement screws, this indexable insert contributes to a dependable cutting system that optimises cycle times and tool-change routines. For secure, versatile turning with Tungaloy AH725 inserts, contact Metav Werkzeuge to discuss suitable holders and availability or request tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6865197 Manufacturer SKU: TUN6865197 Label: CPMT080204 AH725 Tungaloy-Wendeplatte Material: Carbide Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Included angle: 80° Relief angle: 11° Thickness: 2.38 mm Size: 08 Special features Grade: PVD-coated AH725 Chipbreaker: single-sided Hole: cylindrical with 40°–60° countersink Shape: rhombic Application: turning (external and internal) Compatibility: ISO holders and clamping systems Benefit: fracture-resistant, wide material coverage FAQ What materials is this insert suitable for? The CPMT080204 AH725 Tungaloy turning insert (SKU TUN6865197) is designed primarily for steel and stainless steels; the fracture-resistant AH725 grade handles variable materials commonly encountered in mixed-production environments. What are the key geometry specifications? The insert features an 80° included angle with a 0.4 mm corner radius, an 11° relief angle and a plate thickness of 2.38 mm, delivering a balance of edge strength and cutting precision. Can this insert be used for internal turning? Yes — the rhombic 80° geometry and compact profile make the insert suitable for internal turning when combined with an appropriate internal turning holder and correct clamping. What coating and grade does the insert use? This indexable insert uses a PVD-coated carbide substrate in grade AH725, chosen for its universal, breakout-resistant behaviour and reliable performance across a wide material range. How does the chipbreaker influence machining behaviour? The single-sided chipbreaker on this insert promotes consistent chip formation and evacuation, reducing the risk of built-up edge and improving operational uptime and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 AH725 Wendeplatten - Tungaloy
Combine the AH725 PVD-coated carbide grade with precise geometry and secure clamping for consistent, high‑security turning operations; order directly via Metav Werkzeuge or consult our specialists for holder compatibility. CPMT 080204 AH725 — Turning insert, PVD-coated carbide, 0.4 mm radius (Tungaloy) The CPMT080204 AH725 is an ISO‑standard rhombic turning insert designed for external and internal turning; its fracture‑resistant PVD carbide grade suits mixed production and small‑tool applications. PVD-coated carbide AH725 for versatile performance Fracture-resistant grade for high process security Rhombic ISO plate, 08 size, 11° relief angle Cylindrical hole with 40°–60° countersink Consistent cutting performance for secure production The PVD‑coated carbide grade AH725 combines a wear‑resistant surface with a tough substrate, which translates directly into improved tool life and fewer unplanned changes. For turning of steel and stainless steels the coating reduces abrasive wear while the base carbide absorbs cutting loads, so cycle times remain stable. The universal character of the grade makes it suitable where workpiece materials change frequently, offering a clear cost‑benefit through reduced tool inventory and predictable process behaviour. Geometry and chip control that reduce rework A rhombic plate form together with a single‑sided chipbreaker creates effective chip control for both roughing and light finishing passes. The small 0.4 mm corner radius supports fine surface quality on finishing cuts, while the 11° relief angle reduces flank contact and heat build‑up. The plate’s cylindrical hole with 40°–60° countersink ensures positive seating and repeatable clamping, which is essential for dimensional consistency in production batches and for minimising vibration in smaller toolholders. ISO compatibility and integration into existing tool systems As an ISO‑indexable insert, the plate fits a broad range of external holders when matched for form, relief, tolerance class, fastening and thickness. The 2.38 mm thickness and 08 size permit use in compact toolholders where space and stability are critical. Specifying the correct chipbreaker and grade for the application simplifies process planning: the combination of AH725 and the right geometry delivers high process security and reliable surface finish with reduced set‑up risk, beneficial for mixed‑material production and jobs with strict repeatability requirements. Consult Metav Werkzeuge for holder compatibility and secure supply of Tungaloy AH725 inserts to ensure reliable turning results Technical data Article number: 6864947 SKU: 6864947-Tungaloy Manufacturer SKU: TUN6864947 Core measurements Corner radius: 0.4 mm Relief angle: 11° Thickness: 2.38 mm Insert size: 08 Wedge angle: 80° Hole style: cylindrical hole + one-sided countersink (40°–60°) Materials & features Material: carbide Coating / grade: AH725, PVD‑coated Chipbreaker: single-sided Geometry: rhombic, ISO‑standard insert Application: turning (external and internal) Compatibility note: holder fit depends on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CPMT080204 AH725 insert is formulated for machining steel and stainless steels, offering a versatile solution when workpiece materials vary. Can the plate be used for both external and internal turning? Yes, the ISO rhombic geometry and chip control make the insert suitable for external and internal turning applications when paired with the appropriate holder. How does the AH725 grade improve process security? AH725 provides a fracture‑resistant PVD coating and robust carbide core, reducing unexpected edge failures and ensuring consistent performance across mixed batches. What does the hole and countersink design mean for clamping? The cylindrical hole with a 40°–60° countersink enables secure, repeatable seating and good clamping force distribution, improving positional accuracy in production. Which parameters are most important when selecting a holder? Match form, freestanding clearance (relief), tolerance class, fastening type, insert size and thickness to ensure correct seating and stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 AT9530 Wendeplatten - Tungaloy
Benefit from a combination of superior surface finish and controlled wear thanks to the AT9530 coated cermet grade and the precise 0.4 mm corner radius; the ISO rhombic geometry with 11° clearance delivers consistent finishing performance when turning steel. Order the insert directly via Metav Werkzeuge or request consultancy for holder compatibility. CPMT 080204 AT9530 CPMT rhombic ISO turning insert for finishing — Tungaloy The CPMT080204 AT9530 is a rhombic ISO turning insert designed for finishing and light turning of steel, combining a coated cermet cutting grade with a one-sided chipbreaker for stable, high-quality results Coated cermet AT9530 for superior surface finish Rhombic ISO insert CPMT080204 with 11° clearance 0.4 mm corner radius for fine finishing Cylindrical hole with single-sided countersink Consistent finishing and why the cermet grade matters The coated cermet AT9530 is optimised for finishing and light machining of steel, offering a fine-grain cutting surface that promotes excellent surface finish and uniform wear across the cutting edge. Cermet combines ceramic hardness with a metallic binder to resist abrasive wear while preserving edge integrity; the applied coating further improves adhesion and reduces flank wear. For operations where appearance and dimensional consistency are priorities, this combination reduces rework and enhances process stability. Precision geometry that supports reliable toolholding and repeatable results The rhombic ISO geometry with an 11° clearance and a 0.4 mm corner radius is intended for controlled contact between tool and workpiece during finishing passes. The insert’s cylindrical hole with single-sided countersink (40°–60°) provides secure clamping and precise seating in compatible holders; compatibility is determined by geometry, clearance angle, tolerance class, fastening method, size and thickness. The compact 2.38 mm thickness and size designation 08 keep the insert suitable for finishing where limited overhang and good rigidity are required. Practical process benefits and selection guidance A one-sided chipbreaker tuned to finishing reduces built-up edge and produces predictable chip formation under light cut regimes, so cycle consistency improves and surface quality becomes more repeatable. Select the chipbreaker and grade to match workpiece stability and machining parameters: when higher cutting speeds and steady feeds are possible, the coated cermet choice helps extend effective tool life and maintain edge sharpness. For operators new to cermet grades, reducing feed slightly compared with conventional carbide finishing settings often yields the best combination of life and finish. Compatibility, installation and shop-floor considerations The ISO-standard designation simplifies procurement and replacement; still, ensure matching of form, free clearance, tolerance class, fastening and thickness when pairing the insert with external holders or boring bars. The rhombic form and the countersunk hole require a holder designed for CPMT-style inserts; correct seating prevents micro-movements that can degrade surface finish. For process documentation, note the grade designation, insert geometry and holder type to reproduce optimal cutting conditions across batches. For application support or to order original Tungaloy finishing inserts such as the CPMT080204 AT9530, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on fitment and optimal cutting data Technical Data Article number: 6773733 Manufacturer SKU: TUN6773733 Model series: ISO-Drehwendeschneidplatten Designation: CPMT080204 AT9530 Dimensions & core data Size: 08 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included hole: with hole Countersink: 40°–60° Included angle: 80° Features & applications Rhombic insert form One-sided chipbreaker Coated cermet grade AT9530 Intended use: turning (finishing and light machining) Compatibility determined by form, clearance, tolerance, fastening and thickness FAQ What materials is this insert intended for? The CPMT080204 AT9530 is specified for finishing and light machining of steel using a coated cermet cutting grade. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius helps produce a finer surface finish while maintaining adequate edge strength for finishing passes with consistent feed and depth. Which holders are compatible with this ISO rhombic insert? Compatibility depends on holder form, free clearance, tolerance class, fastening, size and thickness; holders designed for CPMT-style ISO inserts are required. What is the purpose of the single-sided countersink on the hole? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure seating and correct axial positioning in the clamping system for repeatable results. Can this grade be used at higher cutting speeds? The coated cermet AT9530 is optimised for finishing; moderate increases in cutting speed can be beneficial, but optimal parameters depend on workpiece stability and machine rigidity Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 GT9530 Wendeplatten - Tungaloy
Combine the wear-resistant GT9530 grade with precise ISO geometry to achieve consistent surface finish and extended tool life; the rhombic 80° form and 0.4 mm corner radius ensure reliable finishing in stable turning setups. Order directly via Metav Werkzeuge or consult the team for application-specific advice. CPMT080204 GT9530 ISO turning insert by Tungaloy — coated cermet, rhombic 80° A CPMT080204 GT9530 rhombic turning insert designed for finishing and light universal turning of steel, offering a wear-resistant coated cermet grade and ISO compatibility for standard holders ISO rhombic insert 80° geometry Wear-resistant GT9530 coated cermet 0.4 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Precise geometry for consistent surface quality The ISO rhombic form with an 80° cutting-edge angle and a 0.4 mm corner radius provides a predictable contact zone that favours stable cutting conditions and improved workpiece finish. With a 11° clearance angle and a plate 2.38 mm thick, the geometry reduces edge deflection and supports repeatable results on serial turning tasks. These dimensional choices translate into fewer reworks and a reduced need for secondary finishing when used within recommended stability parameters. Coated cermet grade GT9530 for longer tool life The insert employs the GT9530 coated cermet concept, combining a hard coating with a wear-resistant substrate to extend service intervals under finishing and light universal cutting of steel. The combination of coating and substrate increases thermal stability and wear resistance, so the cutting edge retains form for longer runs. For operations where surface integrity and extended life outweigh aggressive metal removal, this grade offers a cost-effective balance between performance and longevity. ISO compatibility and secure clamping for reliable use Designed to the ISO specification CPMT080204, the insert fits ISO-standard holders when matching form, clearance, tolerance class, fixing, size and thickness. The cylindrical hole with a one-sided countersink (40°–60°) supports secure clamping and consistent seating, which is essential for dimensional accuracy and repeatability in CNC turning. The rhombic plate form and single-sided chipbreaker are optimised for straightforward set-up and predictable chip flow in conventional external and internal turning. Productivity and practical benefits for production workshops By combining a stable geometry with a coated cermet grade, this insert reduces downtime related to frequent tool changes and improves first-pass surface quality, enhancing throughput for batch production. Workshops and job shops focused on finishing and tight-tolerance turning will appreciate the balance of carbide substrate robustness and the GT9530 surface treatment, which together support longer cutting intervals and consistent part quality. The result is a pragmatic improvement to process stability and overall machining economy. For application advice or to request a quote for Tungaloy inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — the sales team will recommend the optimal grade and holder pairing for the intended turning task. Technical Data Article number: 6998312 Manufacturer SKU: TUN6998312 SKU: 6998312-Tungaloy Name: CPMT080204 GT9530 Tungaloy turning insert Core data Cutting-edge angle: 80° Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Size: 08 Special features Coated cermet grade GT9530 Carbide substrate Rhombic plate form Single-sided chipbreaker Hole style: cylindrical hole + one-sided countersink (40°–60°) ISO designation: CPMT080204 Application: Turning Compatibility defined by form, clearance, tolerance, fixing, size and thickness FAQ Which materials is this insert suitable for? The CPMT080204 GT9530 insert from Tungaloy is optimised for turning steel and performs best in finishing to light universal applications where surface quality and tool life are priorities. How does the GT9530 grade affect tool life and finish? The GT9530 coated cermet system increases wear resistance and thermal stability, which preserves the cutting-edge geometry for longer and contributes to improved surface finish in stable turning conditions. What clamping design does the insert use? The insert features a cylindrical hole with a one-sided countersink (40°–60°) to ensure secure seating and consistent clamping when mounted in an ISO-compatible holder. Is this insert suitable for internal and external turning? Yes; the rhombic geometry and single-sided chipbreaker make the insert suitable for both external and internal turning when the cutting parameters match the insert's finishing-oriented design. How is holder compatibility ensured for ISO inserts? Holder compatibility depends on matching the insert form, clearance angle, tolerance class, fixing method, size and thickness; the CPMT080204 designation indicates ISO conformity for straightforward pairing with standard holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade for superior surface finish, a precise rhombic 80° geometry and a 0.4 mm corner radius to keep production stable and productive; order the insert directly via Metav Werkzeuge or consult the specialists for compatibility and cutting data. CPMT 080204 GT9530 turning insert — coated cermet, rhombic 80° by Tungaloy A CPMT 080204 GT9530 ISO turning insert designed for finishing and light universal turning of steel under stable machining conditions Coated cermet GT9530 for finishing Rhombic 80° geometry for versatility 0.4 mm corner radius for consistent edge Single-sided chipbreaker for stable chips Achieve consistent surface quality and longer tool life The coated cermet GT9530 offers a clear benefit where surface finish and extended running time are priorities. The microstructure of a coated cermet reduces flank wear and helps maintain a sharp cutting edge in finishing passes, which results in fewer reworks. For production environments requiring repeatable part quality, this insert provides a measurable advantage: improved finish at comparable cutting parameters and longer tool life in stable setups. Accurate fit and straightforward mounting for process reliability Compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening and plate thickness; the ISO designation and rhombic shape simplify selection. The insert features a cylindrical hole with single-sided countersink (40°–60°) and 2.38 mm plate thickness, enabling secure clamping and repeatable seating in standard holders. Correct mounting reduces vibration and helps maintain the 0.4 mm corner radius, delivering consistent part geometry over longer series. Grade and geometry explained for practical decision-making This grade is a coated cermet intended as a wear-resistant finishing to light universal grade for steel, giving a balance between surface quality and tool life. The rhombic 80° form provides flexible approach angles, allowing stable cuts during both external and internal turning. The single-sided chipbreaker is tuned for stable chip control in finish operations, keeping the process predictable and reducing the risk of built-up edge. Practical recommendations for turning applications Select the CPMT 080204 GT9530 insert when machine rigidity and fixture stability can be ensured; the grade performs best at moderate feeds and finishing speeds where surface integrity is essential. For roughing or unstable setups, consider a more robust universal grade. When switching inserts, verify seat condition and clamp torque to keep repeatability high and avoid premature wear. System considerations and spare parts planning A complete system comprises the ISO turning plate, a matching external holder or boring bar, a supporting shim/clamping set and replacement screws. Keeping a small stock of shims and screws avoids downtime during insert changes and supports continuous production. Planning ensures efficient tool management and minimises interruptions in high-mix or volume turning operations. For technical specification requests, holder compatibility checks or to procure the Tungaloy CPMT 080204 GT9530 insert through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on the optimal setup for the application. Technical data Article number: 6998318 Manufacturer SKU: TUN6998318 SKU: 6998318-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: GT9530 Facts ISO designation: CPMT080204 Included angle: 80° Clearance angle: 11° Corner radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 08 Features & applications Plate form: rhombic Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: turning (external and internal) Recommended use: finishing to light universal for steel System build: ISO plate, matching holder/boring bar, shim/clamp set, spare screws FAQ What machining tasks is this insert best suited for? The CPMT 080204 GT9530 insert is intended for finishing and light universal turning of steel where a good surface finish and extended tool life under stable conditions are required. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; confirm that the chosen holder accepts a CPMT 080204 geometry and supports the 2.38 mm plate thickness. How does the GT9530 grade influence cutting performance? The GT9530 coated cermet grade is designed for wear resistance and fine surface quality, providing longer life in finishing operations compared with uncoated or softer finishing grades. Is the insert suitable for internal boring as well as external turning? Yes, the rhombic 80° geometry allows use in both external and internal turning operations, provided the holder geometry and overhang are appropriate for the application. What key checks are recommended during insertion changeover? Check seat condition, clamping torque and insert orientation; ensure the cylindrical hole and countersink match the clamping components to maintain repeatability and process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 NS9530 Wendeplatten - Tungaloy
Combining the NS9530 cermet grade with ISO rhombic geometry and a fine 0.4 mm nose radius, this insert delivers low cutting forces and outstanding surface finish for finishing turning. Order directly via Metav Werkzeuge or consult our technical advisors for toolholder compatibility and grade selection. CPMT080204 NS9530 — CPMT 080204 NS9530 turning insert for finishing, 0.4 mm radius, 11° relief (Tungaloy) CPMT080204 NS9530 is an ISO rhombic indexable insert designed for finishing turning, offering a sharp uncoated cermet cutting edge and single-sided chip control. CPMT080204 ISO rhombic geometry Sharp-edge uncoated cermet grade NS9530 0.4 mm nose radius for fine surface finish Cylindrical hole with single-side countersink High-quality finishing with a dedicated cermet grade The NS9530 grade is an uncoated cermet developed for finishing operations in steel where a sharp cutting edge and low cutting forces are required. Compared with conventional carbide grades, cermet delivers superior surface integrity at small depths of cut and continuous feed conditions, reducing the need for secondary finishing. The fine 0.4 mm nose radius and the single-sided chipbreaker contribute to consistent surface roughness and dimensional accuracy. For planners and operators, this means fewer grinding passes and a higher first-pass yield on shafts, journals and turned faces. Precise fit and repeatability with ISO-compliant geometry The insert conforms to ISO dimensions for rhombic turning plates and is specified as size 08 with a thickness of 2.38 mm, an included angle of 80° and an 11° relief. Compatibility with a holder depends on form, relief angle, tolerance class, mounting method, size and thickness; using the correct ISO external holder or boring bar ensures secure clamping and repeatable positioning. The cylindrical hole with a single-side countersink (40°–60°) simplifies alignment and provides stable fixation under intermittent loads. For production environments that require dependable repeatability, the standardised geometry reduces setup time and improves process stability. Efficiency and process benefits for turning steel Engineered for turning of steel, this indexable plate supports continuous cutting and small depth-of-cut finishing strategies, enabling shorter cycle times without sacrificing finish quality. The sharp cermet edge reduces feed forces, which lowers spindle load and can permit slightly higher feeds while maintaining required surface tolerance — a clear rational advantage in high-mix or batch production. Selecting this finishing grade in the system stack-up (insert + holder + shim/clamp + screw) helps to maintain consistent tool life and predictable replacement intervals, supporting production planning and cost-per-part calculations. System integration, selection and practical advice The ISO insert is intended to be used within a complete system: a matched external holder or boring bar, a suitable backing/shim or clamp set and replacement screws. Choose the single-sided chipbreaker and NS9530 grade when prioritising surface finish and low cutting forces; when facing interrupted cuts or harder materials, opt for a different chipbreaker or a tougher grade. For application matching — for instance, selecting the correct holder geometry and tolerance class — the technical advisors at Metav Werkzeuge can provide tailored recommendations based on component drawing, machine rigidity and material batch. This combines technical support with practical selection, reducing trial-and-error at the machine. Contact Metav Werkzeuge for application-matching and technical advice on the Tungaloy CPMT080204 NS9530 finishing insert and system compatibility Technical data Article number: 6998455 SKU: 6998455-Tungaloy Manufacturer SKU: TUN6998455 Model series: ISO turning indexable inserts Material: cemented carbide Grade: NS9530 Key measurements Nose radius: 0.4 mm Relief angle: 11° Insert size: 08 Thickness: 2.38 mm Included angle: 80° Hole style: with hole; cylindrical hole + single-side countersink (40°–60°) Design & special features ISO rhombic plate (CPMT080204) Uncoated cermet cutting grade for finishing Single-sided chipbreaker Compatible with ISO external holders and boring bars Intended application: turning (finishing) FAQ What materials is this insert best suited for? The NS9530 cermet grade is optimised for finishing operations in steel; the CPMT080204 NS9530 insert gives low cutting forces and high surface quality on continuous turning of steel components. Is the insert coated? This Tungaloy CPMT080204 NS9530 indexable plate is an uncoated cermet grade, selected specifically for its sharp cutting edge and fine finish capabilities. What are the critical dimensions to check for holder compatibility? Check insert size (08), thickness (2.38 mm), relief angle (11°), included angle (80°) and the hole/countersink geometry; matching these with the holder ensures correct clamping and repeatability for the CPMT080204 NS9530. Can this plate handle interrupted cuts? The NS9530 finishing grade is optimised for continuous cuts and small depths of cut; for heavily interrupted machining a tougher grade or different chipbreaker is recommended instead of the CPMT080204 NS9530. Which components make up the complete tool system for use with this insert? A complete system includes the ISO-indexable insert, a matched external holder or boring bar, backing/shim or clamp set and replacement screws; specifying the CPMT080204 NS9530 together with the correct holder ensures stable performance and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and straightforward holder compatibility to keep batch tolerances tight and cycle times short; order the insert directly via Metav Werkzeuge or consult the technical advisors for application guidance. CPMT080204 NS9530 — ISO rhombic turning insert for finishing, Tungaloy (11° clearance, 0.4 mm corner radius) The CPMT080204 NS9530 is a rhombic ISO turning insert designed for finishing operations on steel, offering a sharp cutting edge and consistent surface quality in continuous cuts. Uncoated cermet for finishing Sharp edge for low cutting forces Rhombic ISO form CPMT Cylindrical hole with countersink Precision finishing for continuous turning The rhombic ISO insert delivers a reliably smooth finish for long runs and continuous cuts. With the NS9530 cermet grade and its deliberately sharp cutting edge, the insert reduces cutting resistance and helps achieve superior surface finish on steel components. The modest corner radius (0.4 mm) and thin section make the geometry particularly suited to small depths of cut and fine-turning tasks, where dimensional control and repeatable part quality are decisive. Compatibility with standard ISO holders is determined by the insert form, clearance angle and tolerance class, allowing straightforward integration into existing tool systems. Improved productivity through reduced forces and stable edge life Selecting an uncoated cermet insert for finishing brings tangible productivity gains: lower cutting forces reduce vibration and tool deflection, which shortens machining times by reducing the need for reworking and part inspection. The single-sided chipbreaker and the precise 11° clearance ensure predictable chip flow in continuous operations, stabilising the cutting process and extending effective edge life. For batch production where surface integrity and cycle consistency matter, this insert supports a cost-effective balance between throughput and finish quality. Practical compatibility and mounting details for reliable set-up The insert is an ISO-format CPMT plate with a cylindrical hole and a single-side countersink (40°–60°), thickness 2.38 mm, included angle 80°, and rhombic shape — features that define how it seats in the clamping system and how torque loads are transferred. The compatibility with holders depends on the insert form, free angle, tolerance class, fastening and dimensional fit; matching these parameters avoids underclamping and ensures repeatable positioning. For applications requiring continuous fine cuts on steel, this combination of geometry and the NS9530 grade provides a predictable, high-quality finish with minimal secondary processing. Contact Metav Werkzeuge today for tailored advice or to order the Tungaloy finishing-grade CPMT080204 NS9530 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998448 SKU: 6998448-Tungaloy Manufacturer SKU: TUN6998448 Product designation: CPMT080204 NS9530 Model series: ISO turning inserts Manufacturer: Tungaloy Core specifications Corner radius: 0.4 mm Clearance angle: 11° Insert thickness: 2.38 mm Included angle: 80° Size: 08 (ISO) Design & features Uncoated cermet grade NS9530 Rhombic insert shape (CPMT) Cylindrical hole with single-side countersink (40°–60°) Single-sided chipbreaker Intended for finishing steel with continuous cuts FAQ What materials is this insert suited for? The CPMT080204 NS9530 Tungaloy turning insert (SKU 6998448-Tungaloy) is intended primarily for finishing steel workpieces, optimised for continuous cuts and small depths of cut. How does the NS9530 grade influence surface finish? The uncoated NS9530 cermet offers a very sharp cutting edge and low cutting forces, helping to produce a finer surface finish and reduced need for subsequent polishing when the insert is used in finishing operations. Which holders are compatible with this ISO insert? Compatibility depends on insert form, clearance angle, tolerance class, fastening and dimensional fit; the CPMT geometry and the cylindrical hole with countersink are designed for standard ISO CPMT holders and clamping systems. What cutting conditions are recommended for best results? Best results are typically achieved with light depths of cut and continuous feed suitable for finishing; the combination of NS9530 and the small corner radius supports stable cutting at modest feed rates for high-quality finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated cemented carbide, an 80° rhombic geometry and a 0.4 mm nose radius to achieve stable turning performance and consistent edge life; order the insert directly via Metav Werkzeuge or ask our advisors for cutting data and holder compatibility. CPMT080204 T5115 CPMT Turning insert — 80° rhombic, CVD-coated (Tungaloy) The CPMT080204 T5115 is an ISO‑standard rhombic turning insert engineered for external and internal turning, optimised for cast iron machining. CVD-coated carbide for high wear resistance 80° rhombic geometry for stable cutting Single-sided chipbreaker for controlled chips ISO-compatible size 08, 0.4 mm radius Extended tool life through balanced grade and coating The CVD-coated T5115 grade is a universal solution for cast iron, offering a balanced combination of wear resistance and edge stability. The use of a CVD layer on cemented carbide provides a hard, wear-resistant surface that reduces flank wear while maintaining cutting-edge integrity, which translates to longer tool life and fewer insert changes. Given its universal character, this grade supports productive turning operations where consistent performance across a range of cast-iron materials is required. Predictable machining and improved chip control An 80° geometry combined with a 0.4 mm nose radius and a single-sided chipbreaker promotes stable cutting forces and predictable chip formation. The rhombic form gives reliable seat and clearance in standard toolholders, while the chipbreaker design helps direct chips away from the workpiece, improving surface finish and reducing rework. The insert’s 11° clearance angle and the specified hole with a single-side countersink (40°–60°) facilitate secure clamping and repeatable positioning in ISO-compatible clamping systems. Simple system integration for efficient workshop use This insert is part of the ISO turning insert system and is compatible with standard external holders, boring bars, support pads and clamping kits when matched by form, clearance angle, tolerance class, attachment, size and thickness. The combination of ISO-standard designation, the clearly defined thickness and the central hole design ensures straightforward retrofitting into existing setups; appropriate selection of chipbreaker and grade according to workpiece material and process stability supports efficient, reproducible machining cycles. For complex or critical applications, consultation on holder selection and cutting parameters enhances process reliability. For application guidance or to source the Tungaloy CPMT080204 T5115 insert for cast iron turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, experienced advice. Technical data Article number: 6864678 Manufacturer SKU: TUN6864678 SKU: 6864678-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CPMT080204 T5115 Core specifications Insert size: 08 Geometry angle: 80° Nose radius: 0.4 mm Thickness: 2.38 mm Clearance angle: 11° Hole: with hole; cylindrical hole + one-side countersink (40°–60°) Materials & features Material: cemented carbide Coating/grade: T5115 (CVD) Chipbreaker: single-sided Suitable application: Turning; external and internal turning Compatibility: ISO toolholders; determined by form, clearance angle, tolerance class, attachment, size and thickness FAQ What materials is this insert primarily suited for? The CPMT080204 T5115 insert is specified as a universal grade for cast iron, offering a balanced mix of wear resistance and edge stability for a broad range of grey and nodular cast iron turning tasks. What is the nose radius and why is it important? The insert has a 0.4 mm nose radius; this small radius supports fine surface finish and dimensional control in finishing or semi-finishing turning operations where modest corner strength is required. How does the T5115 coating affect performance? The CVD coating on the T5115 grade increases surface hardness and wear resistance, which helps maintain a sharp cutting edge longer and improves consistency under varying cutting conditions on cast iron. Is this insert compatible with standard ISO holders? Yes; the insert is an ISO‑standard rhombic type and fits ISO‑compatible external holders and boring bars when matching form, clearance angle, tolerance class, attachment method, size and thickness. What chip control can be expected with the single-sided chipbreaker? The single-sided chipbreaker is designed for controlled chip formation and evacuation, reducing the likelihood of entangling chips and supporting improved surface quality during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD-coated carbide, precise ISO compatibility and robust geometry for consistent turning performance; order directly via Metav Werkzeuge or contact our consultants for application advice. CPMT 080204 T6215 – Turning indexable insert by Tungaloy The CPMT 080204 T6215 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for stable to slightly interrupted machining of stainless steels. CVD-coated carbide for high wear resistance Rhombic 80° geometry for versatile turning 0.4 mm corner radius for robust edge strength Cylindrical hole with single-side countersink Longer tool life through CVD-coated carbide and stable cutting The CVD-coated carbide grade T6215 delivers high wear resistance, making it suitable for sustained production runs on stainless steels. The chemical vapour deposition layer increases surface hardness and temperature stability during cutting, which reduces flank wear and preserves cutting edge geometry. As a result, the insert supports longer tool life and fewer indexings, helping to improve process economy and maintain component quality. Clear compatibility and simple holder selection This insert conforms to the ISO 080204 designation and is part of the ISO turning insert family; compatibility with an insert holder depends on form, 11° relief angle, tolerance class, fastening method, size and thickness. The rhombic form with an 80° cutting angle suits a wide range of holder types and turning strategies. Specifying these parameters during planning avoids uncertainty at setup and ensures repeatable mounting and concentricity on external and internal turning operations. Geometry tuned for edge strength and chip control The 0.4 mm corner radius balances edge durability and surface finish, while the single-sided chipbreaker promotes predictable chip formation under the intended cutting regimes. The rhombic profile and the cylindrical hole with a one-sided countersink (40°–60°) provide stable clamping and contribute to vibration resistance in moderately interrupted cuts. Together these features reduce the risk of edge chipping and support consistent surface integrity on turned components. Practical selection advice to boost productivity Choose the chipbreaker and grade according to workpiece material, machining strategy and machine stability: the T6215 grade is intended for stable to slightly interrupted turning of stainless steels, offering a balance of wear resistance and toughness. For heavy interrupted cuts or marginally rigid setups consider larger corner radii or alternative insert geometries; for fine finishing, pair the insert with appropriate feeds and speeds to exploit the coating’s thermal stability. Documentation of holder compatibility and cutting data supports rapid process setup and reduces scrap rates. Contact Metav Werkzeuge for tailored application support and stock availability — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CPMT 080204 T6215 insert and suitable holder recommendations. Technical data Article number: 6903087 Manufacturer SKU: TUN6903087 Stock SKU: 6903087-Tungaloy Model series: ISO turning indexable inserts Material: Cemented carbide (Hartmetall) Grade/coating: T6215, CVD-coated Facts Insert designation: 080204 (ISO 080204) Size: 08 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Cutting angle: 80° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic insert geometry (80°) Single-sided chipbreaker Designed for external and internal turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness Intended use: stable to slightly interrupted turning of stainless steels FAQ Which materials is this insert suitable for? The CPMT 080204 T6215 Tungaloy indexable insert is optimised for machining stainless steels and performs well under stable to slightly interrupted turning conditions. How is holder compatibility determined? Compatibility depends on the insert form, the 11° relief angle, tolerance class, fastening method, size and thickness; matching these parameters ensures correct fit for the chosen holder. What benefits does the CVD coating bring? The CVD-coated carbide in grade T6215 increases surface hardness and thermal stability, improving wear resistance and extending edge life on demanding turning operations. When should the 0.4 mm corner radius be used? The 0.4 mm radius provides a compromise between edge strength and surface finish and is recommended for general-purpose turning where robustness and good finish are both required. Can this insert be used for interrupted cuts? Yes; the insert is designed for stable to slightly interrupted cutting. For heavy interruptions or poor machine rigidity, assess alternative geometries or larger radii. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO interchangeability and secure clamping for consistent turning results; order directly via Metav Werkzeuge or ask the consultants for application-specific advice. CPMT080204 T6215 turning insert — ISO rhombic insert by Tungaloy for turning CPMT080204 T6215 is an ISO‑standard rhombic turning insert designed for external and internal turning, optimised for stainless steel machining under stable to slightly interrupted cutting conditions. CVD‑coated carbide for wear resistance ISO‑compatible geometry and secure clamping Rhombic 80° insert form for versatile turning Single‑sided chipbreaker with hole and countersink High wear resistance for consistent stainless steel machining The CVD‑coated carbide grade T6215 provides a wear‑resistant cutting edge tailored to turning stainless steel where stability can be maintained. The coating enhances resistance to abrasive and adhesive wear, reducing flank wear and extending edge life during continuous cuts. This grade is engineered to perform reliably under stable and slightly interrupted conditions, delivering a balance between tool life and surface finish without sacrificing productivity. ISO conformity and secure clamping reduce setup time As an ISO‑standard rhombic insert (08 size, 80°), the part fits standard external holders and boring bars when matched by form, clearance angle, tolerance class, fastening method, size and thickness. The design includes a with hole feature—a cylindrical hole with single‑side countersink (40°–60°)—to ensure repeatable and secure clamping. The 0.4 mm corner radius offers a compromise between edge strength and finish quality, while the 11° clearance angle supports reliable chip flow and reduced rubbing at the flank. Practical benefits for workshop productivity and process stability Selecting the right chipbreaker and grade for the machine setup and workpiece stability is decisive: the single‑sided chipbreaker is suitable where predictable chip formation is required. The insert’s geometry and carbide substrate help maintain a stable cutting edge, which leads to fewer tool changes and steadier component quality. If application specifics are uncertain, Metav Werkzeuge can assist with grade and chipbreaker selection for the intended turning task, helping to match cutting parameters to the insert’s capabilities. Contact Metav Werkzeuge for tailored application advice on the Tungaloy CPMT080204 T6215 insert or request detailed technical data via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6903083 SKU: 6903083-Tungaloy Manufacturer SKU: TUN6903083 Brand: Tungaloy Facts Geometry: rhombic, 80° Size: 08 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Special features Grade: T6215 (CVD‑coated carbide) Chipbreaker: single‑sided Application: turning (external and internal) System: ISO turning insert compatible with external holders and boring bars FAQ Is this insert suitable for stainless steel turning? Yes. The CPMT080204 T6215 insert is designed as a wear‑resistant CVD‑coated carbide grade for turning stainless steel under stable to slightly interrupted cutting conditions. What is the corner radius and how does it affect finish? The corner radius is 0.4 mm, which provides a balance between edge strength and surface finish; it helps achieve good component quality while maintaining robust edge life. Which holders are compatible with this insert? Compatibility follows ISO standards: match the insert form, clearance angle, tolerance, fastening style, size and thickness to the external holder or boring bar to ensure secure clamping. What chipbreaker does the insert use and when is it recommended? The insert features a single‑sided chipbreaker, recommended where controlled chip formation and stable machining conditions are present. What does the T6215 designation indicate? T6215 denotes a CVD‑coated carbide grade optimised for wear resistance and reliable performance when machining stainless steel. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 080204 T9215 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide and an 80° rhombic geometry to boost productivity in medium steel turning; the T9215 grade balances wear resistance and fracture toughness for continuous to light interrupted cuts. Order directly via Metav Werkzeuge or contact our consultants for application advice. CPMT080204 T9215 ISO turning insert — rhombic 80° geometry, Tungaloy CPMT080204 T9215 is an ISO‑standard indexable turning insert designed for general external and internal turning applications, offering reliable chip control and consistent edge security in medium steel machining. CVD-coated carbide grade T9215 ISO 80° rhombic geometry 0.4 mm corner radius for finish turning Single-sided chipbreaker, with hole Productivity gains from a wear-resistant grade The CVD-coated carbide composition of this insert provides a prominent advantage in sustained production: T9215 combines elevated wear resistance with fracture toughness, increasing tool life under continuous operation. Thanks to the coating and substrate pairing, cutting edge wear progresses more predictably, which reduces unplanned tool changes and enhances process stability. For shops seeking consistent cycle times, the combination of coating technology and substrate hardness leads to measurable efficiency improvements in medium steel turning. Secure clamping and ISO compatibility for predictable results Manufactured to ISO dimensional standards, the insert matches a broad range of holders when form, clearance angle and tolerance class align; the insert’s rhombic geometry with an 80° principal cutting angle and 11° clearance supports stable seating and straightforward replacement. The central with hole design and the cylindrical hole with a single‑side countersink (40°–60°) simplify clamping in supported holders while ensuring repeatable locating. Clear specification of these interface parameters reduces setup time and helps maintain consistent part quality across batches. Chip control and recommended applications to reduce manual rework The single-sided chipbreaker is optimised for medium steel and helps to control chip form during continuous and light interrupted cuts, lowering the risk of entanglement and minimising manual intervention at the machine. The modest 0.4 mm corner radius supports improved surface finish while still allowing for light roughing where required. Use this insert for external turning and internal profiles where predictable chip evacuation and edge strength are priorities; the geometry and grade together provide a balance between surface integrity and life expectancy in serial production. Contact Metav Werkzeuge for tailored recommendations on cutters and holders for the Tungaloy CPMT080204 T9215 insert, or request a specification check via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6774006 Manufacturer SKU: TUN6774006 SKU: 6774006-Tungaloy Model series: ISO turning inserts Material: cemented carbide Grade: T9215 Facts Insert designation: CPMT080204 Principal angle: 80° Clearance angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Plate size: 08 Special features CVD-coated carbide substrate Rhombic plate form Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Intended application: turning Best for medium steel, continuous to light interrupted cuts FAQ What materials is this insert suited for? The CPMT080204 T9215 insert from Tungaloy is optimised for medium steel machining, offering a balance of wear resistance and toughness for continuous to lightly interrupted turning operations. How does the chipbreaker affect machining? The single‑sided chipbreaker integrated into this insert promotes controlled chip formation during turning, which reduces the need for manual chip handling and helps preserve surface finish on workpieces when using the Tungaloy CPMT080204. Is the insert compatible with standard ISO holders? Yes. The insert conforms to ISO plate dimensions and the 80° rhombic form, so compatibility depends on matching form, clearance, tolerance class, fastening and thickness with the chosen holder system. What edge preparation does the insert have for surface finish? With a 0.4 mm corner radius, the insert is suited to achieving a good surface finish while maintaining edge strength; this radius is a pragmatic choice for many finishing and light roughing tasks in medium steel. Can it handle interrupted cuts? The T9215 grade and the substrate/coating pairing provide sufficient toughness for light interruptions; for heavy interruption cycles, review application details with Metav Werkzeuge to confirm suitability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, an 80° rhombic geometry and proven chip control for efficient medium-steel turning; order through Metav Werkzeuge or request tailored application advice from the sales team. CPMT 080204 T9215 indexable insert for turning by Tungaloy A CPMT 080204 T9215 ISO-compliant indexable insert engineered for external and internal turning in medium-steel applications. CVD-coated carbide grade T9215 Optimised for medium steel turning Rhombic insert, 80° approach angle One-sided chipbreaker, 0.4 mm radius Consistent wear resistance through CVD coating for higher throughput The CVD-coated carbide composition delivers a balance of wear resistance and fracture toughness, making the insert suitable for continuous and lightly interrupted turning. Chemical vapour deposition (CVD) produces a uniform hard layer that reduces abrasive wear during sustained cutting, which translates into longer edge life and fewer tool changes on the production line. For process planners this means predictable tool performance and improved machine uptime when working with medium-grade steels. Geometry and chip control that stabilise the cut The 80° rhombic geometry combined with an 11° clearance supports stable cutting forces and accurate tool positioning in both external and internal machining. The one-sided chipbreaker is optimised for medium steels to promote reliable chip formation and evacuation, reducing the likelihood of built-up edge and rework. A 0.4 mm corner radius gives a compromise between edge strength and achievable surface finish; smaller radii favour lighter finishes, while this radius enhances robustness where interrupted cuts occur. Mounting compatibility and system composition for fast tool changeovers Compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness. The product is supplied as an ISO-indexable plate designed to interface with the usual external holder or boring bar, plus the required shim/clamping set and replacement screws in a typical system. The insert’s cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping and repeatable positioning, simplifying inventory management and reducing assembly time at the machine. Practical guidance for application and process optimisation The T9215 grade has been chosen as a first option for mid-range steel machining where a combination of productivity and reliable wear performance is required. Select the chipbreaker and cutting parameters according to component rigidity and machining stability; the insert performs best when paired with an appropriate holder and correct feed/speed for the chosen material. Regular monitoring of flank wear will provide clear criteria for tool change and support consistent component quality. For application matching, detailed technical data or to source the Tungaloy CPMT 080204 T9215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-oriented advice and availability. Technical data Article number: 6774021-Tungaloy Manufacturer article number: 6774021 Insert designation: CPMT080204 Model series: ISO turning indexable inserts Material: carbide Numbers Corner radius: 0.4 mm Clearance angle: 11° Approach angle: 80° Thickness: 2.38 mm Size: 08 Special features Grade: T9215 (CVD-coated carbide) One-sided chipbreaker With hole: cylindrical hole + single-sided countersink (40°–60°) Rhombic geometry Suitable for external and internal turning; medium steel applications System: ISO insert with matching external holder or boring bar; shim/clamping set and spare screws FAQ What materials is this insert best suited for? The Tungaloy CPMT 080204 T9215 insert is optimised for medium steel machining, combining wear resistance and fracture toughness for productive turning operations. How does the chipbreaker affect performance? The one-sided chipbreaker on this insert promotes stable chip formation and evacuation in medium-steel turning, helping to reduce built-up edge and improve surface quality. What does the CPMT080204 designation mean for holders? CPMT080204 identifies the insert geometry, size and hole arrangement; matching the insert to a holder requires checking form, clearance angle, tolerance class, fastening method, size and thickness to ensure compatible seating and clamping. Is the insert suitable for interrupted cuts? Yes. The T9215 grade and the 0.4 mm corner radius provide a balance of toughness and wear resistance that is appropriate for continuous and lightly interrupted cutting conditions. What is the purpose of the countersunk hole? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and repeatable positioning when mounted in the appropriate ISO holder, simplifying reassembly after index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com