CPMT 080204 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and precise ISO geometry for productive medium-steel turning; order the CPMT080204 T9215 insert via Metav Werkzeuge or consult our application specialists for tailored guidance. CPMT 080204 T9215 turning insert — ISO rhombic, CVD-coated carbide (Tungaloy) The CPMT080204 T9215 is an ISO rhombic turning insert designed for external and internal turning, offering robust wear resistance and reliable performance for medium-steel machining. CVD-coated carbide grade T9215 ISO rhombic CPMT 08 shape 11° relief angle for secure cutting 0.4 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Consistent productivity for medium-steel turning The combination of a CVD-coated surface and a wear-resistant carbide substrate gives this grade a long life under continuous and slightly interrupted cuts. For workshops seeking repeatable throughput, the T9215 composition balances high wear resistance with fracture toughness, reducing unexpected tool changes and maintaining cycle times. The coating improves thermal stability and resistance to adhesive wear during high-material-removal operations, which translates into fewer interruptions and a steadier production rhythm when machining standard steel grades. Geometry that secures dimensional accuracy and surface quality The ISO rhombic geometry and the 0.4 mm corner radius contribute directly to achievable surface finish and form-holding during finishing passes. A moderate radius reduces cutting forces while smoothing transitions, so a fine surface can be produced without sacrificial material removal. The 11° relief angle supports effective chip flow and lowers contact stresses at the cutting edge; in practice, this means more consistent tool life and better part tolerances in serial production. These geometrical choices provide clear benefits for shops prioritising predictable part quality. Secure seating and system compatibility for efficient changeovers Designed to the ISO series, the insert accommodates standard holders and clamping systems; the cylindrical hole with a one-sided countersink (40°–60°) ensures reliable mounting and repeatable seating. Compatibility is determined by shape, relief, tolerance class, fastening method, size and thickness; selecting a correctly sized holder and replacement screw completes a robust system setup. For retrofit situations or mixed-tool tooling stations, this standardisation simplifies inventory and reduces the risk of incorrect assembly, thus saving setup time and avoiding scrap. Practical selection and application advice for everyday turning This indexable insert suits external and internal turning operations on medium steels and performs well when paired with the appropriate chipbreaker for the chosen stability and feed range. CVD coating is a thin, chemically deposited layer that increases hardness and heat resistance without compromising edge toughness; it is particularly effective when stable cutting parameters are maintained. For interrupted cuts or unstable setups, consider a more fracture-resistant grade or a conservative feed; for continuous finishing, the T9215 grade delivers both economy and surface quality. For complex or unfamiliar applications, technical guidance helps to match holder geometry and cutting data to the component and machine capability. For application-specific advice and stock information on Tungaloy turning inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — for professional recommendations and rapid availability. Technical data Article number: 6772443 Manufacturer SKU: TUN6772443 SKU: 6772443-Tungaloy Name: CPMT080204 T9215 Tungaloy insert Facts ISO code: 080204 Size: 08 Plate thickness: 2.38 mm Relief angle: 11° Included hole: cylindrical with one-sided countersink (40°–60°) Corner radius: 0.4 mm Nominal angle: 80° Special features CVD-coated carbide grade T9215 Rhombic plate form, one-sided chipbreaker Suitable for external and internal turning of medium steel Designed for continuous to slightly interrupted cuts ISO-standard insert for compatibility with standard holders FAQ Which materials is this insert intended for? The CPMT080204 T9215 insert from Tungaloy (indexable turning insert, SKU 6772443-Tungaloy) is primarily specified for medium steel machining and performs best under continuous to lightly interrupted cutting conditions. How does the T9215 grade affect tool life compared with uncoated grades? The T9215 CVD coating on a carbide substrate enhances thermal stability and wear resistance compared with uncoated carbide, leading to longer tool life in medium-steel applications while maintaining edge toughness. What machining operations suit this insert geometry? The rhombic CPMT 08 form with a 0.4 mm corner radius is suited to general-purpose external and internal turning where a balance of roughing and finishing is required; choose a matching chipbreaker and holder for optimal results. Is this insert compatible with standard ISO toolholders? Yes — the insert follows ISO dimensions and features a cylindrical hole with a countersink for secure clamping, so it is compatible with corresponding ISO holders and clamping sets when matched by size and tolerance class. What cutting data should be used as a starting point? Begin with moderate speeds and feeds appropriate for medium steel, then adjust based on machine rigidity and stability; for higher productivity, increase speeds within the recommended limits while monitoring tool wear and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T9215 for high wear resistance and fracture toughness, and the ISO rhombic CPMT080204 geometry with an 11° clearance angle and 0.4 mm nose radius for dependable turning of medium steel; order directly via Metav Werkzeuge or consult the technical team for machining recommendations. CPMT080204 T9215 ISO rhombic turning insert — Tungaloy, CVD-coated carbide, 80° form CPMT080204 T9215 is an ISO rhombic turning insert designed for external and internal turning, optimised for medium steel with a CVD-coated carbide grade that balances wear resistance and toughness CVD-coated carbide grade T9215 Suited for medium steel turning Rhombic ISO CPMT 80° form 11° clearance angle and 0.4 mm nose radius High productivity through proven grade and coating The CVD-coated T9215 composition provides a robust balance of wear resistance and fracture toughness, making it a reliable choice for continuous to slightly interrupted cuts on medium-strength steels. This grade has been developed to maintain consistent tool life under productive turning conditions, which supports predictable cycle times and reduced downtime. The combination of coating and substrate enables steady performance across varied feed rates and cutting speeds, translating to measurable gains in shop-floor efficiency. Stable cutting geometry for accurate chip control and repeatability The rhombic ISO form with an 80° included angle and 11° clearance angle delivers a stable cutting edge for general turning tasks; the 0.4 mm nose radius supports finishing and light turning work while maintaining edge strength. The insert is ISO-designated as CPMT080204 and features a plate thickness of 2.38 mm, size 08, and a central hole with a cylindrical opening plus a one-sided countersink (40°–60°) for secure clamping. Compatibility with a holder is determined by form, clearance, tolerance class, fastening and plate dimensions, so the system approach—insert, appropriate outer holder or boring bar, shim/clamping kit and replacement screws—ensures repeatable seating and concentricity. Practical guidance for selection and machining outcomes Select the single-sided chipbreaker and the T9215 grade to match the workpiece material and stability of the setup; the chipbreaker geometry influences chip curl and evacuation, reducing the risk of re-cut and improving surface finish. For medium steel applications the insert serves as a first-choice option where productivity and reliability are priorities. Where cutting conditions are highly interrupted or forces spike, consider modifications to feed or a different edge preparation to preserve edge life. For further assistance on holder matching, cutting data or process optimisation, the product specialists can provide targeted advice. Contact Metav Werkzeuge for application-specific recommendations and to order the Tungaloy CPMT080204 T9215 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert support. Technical data Article number: 6773975 Manufacturer SKU: TUN6773975 SKU: 6773975-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: T9215 (CVD-coated) Facts Nose radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 08 Included angle: 80° Special features ISO designation CPMT080204 Rhombic plate form Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Intended application: turning (external and internal) Suitable for medium steel System: insert, outer holder or boring bar, shim/clamping kit and replacement screws CVD-coated carbide grade for wear resistance and fracture toughness FAQ What materials is the CPMT080204 T9215 insert intended for? The CPMT080204 T9215 insert is specified primarily for medium steel applications; the CVD-coated carbide composition provides the wear resistance and fracture toughness required for productive turning. How does the central hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure seating and alignment in compatible holders; correct matching of form, tolerance and fastening secures repeatable clamping for the Tungaloy insert. Which chipbreaker should be selected for this insert? The insert offers a single-sided chipbreaker; select the chipbreaker style that matches the intended feed and stability to improve chip control and surface finish when machining medium steel. Can this insert be used for interrupted cuts? The T9215 grade is optimised for continuous to slightly interrupted cutting; for heavily interrupted conditions consider a different edge preparation or a grade recommended for higher impact resistance. How to verify compatibility with an existing holder? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; compare the CPMT080204 dimensions and hole style with the holder specification and, if necessary, consult the technical team for verification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 T9225 Wendeplatten - Tungaloy
Achieve consistent productivity with a robust combination of CVD‑coated carbide and the tough T9225 grade for medium to heavy steel turning; the result is extended tool life and steady chip control. Order the CPMT 080204 T9225 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 080204 T9225 indexable turning insert, ISO rhombic 80° – Tungaloy The CPMT 080204 T9225 is an ISO‑standard rhombic indexable insert designed for medium to heavy turning, offering a balance of toughness and wear resistance for varying engagement conditions CVD-coated carbide for durability Robust universal grade T9225 80° rhombic geometry for versatile turning 0.4 mm corner radius for edge strength Productivity gains through a tough, wear‑resistant grade The combination of a CVD‑coated carbide substrate and the T9225 grade is engineered for productive machining of steel where cutting conditions vary. This composition provides a predictable wear pattern and increased resistance to abrasive and adhesive wear, which translates into fewer indexings and longer uninterrupted runs. The one‑sided chipbreaker promotes controlled chip formation, reducing downtime related to chip management and improving cycle reliability for batch and single‑piece production alike. Emphasising measurable performance, this configuration supports higher process stability under mixed or slightly interrupted cuts. Geometry that stabilises cutting and improves surface finish The rhombic 80° shape and a 0.4 mm corner radius give a combination of accessibility and edge strength: the approach angle suits both general external turning and limited internal operations while the small radius maintains component accuracy and surface quality. A relief angle of 11° and a plate thickness of 2.38 mm work together to resist vibration and protect the cutting edge under moderate to heavy engagement. Secure clamping is achieved via the central hole with cylindrical bore and one‑sided countersink, ensuring consistent seat and repeatable positioning in ISO holders, which supports repeatability and dimensional accuracy across production batches. Simple integration into ISO tool systems and predictable selection As an ISO‑standard insert, this grade fits established tool programmes and replacement cycles. Compatibility to a holder is determined by form, relief angle, tolerance class, attachment method, size and thickness; matching these factors ensures correct seating and cutting geometry. Where interrupted cuts or variable stiffness occur, the T9225 grade offers additional toughness compared with purely wear‑optimised grades, making it suitable as a versatile all‑round choice in mixed production environments. Selecting the correct chipbreaker and insert geometry according to workpiece material and machine rigidity will yield optimised tool life and consistent part quality. Practical application advice and material range Intended primarily for turning operations on steel, this insert is a robust choice for medium to heavy machining tasks and situations requiring enhanced toughness. Typical uses include external and internal turning where a balance of wear resistance and edge stability is needed. For best results, combine the insert with a matching external holder or boring bar, a proper backing pad/clamp set and specified screws for secure assembly. When machining demanding steels or when encountering slightly interrupted cuts, the universal behaviour of this grade helps maintain process security and surface finish outcomes. For application guidance, batch supply or to discuss the suitability of the CPMT 080204 T9225 for a specific process, contact Metav Werkzeuge for expert assistance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781061 Manufacturer SKU: TUN6781061 Insert designation: CPMT080204 Manufacturer item number: 6781061 Data Corner radius: 0.4 mm Plate thickness: 2.38 mm Approach angle: 80° Relief angle: 11° Size: 08 Special features CVD‑coated carbide, grade T9225 Rhombic insert form One‑sided chipbreaker Central hole with cylindrical bore and single countersink (40°–60°) ISO‑standard turning insert for external and internal turning Intended for medium to heavy steel turning FAQ What materials is this insert designed to machine? The CPMT 080204 T9225 indexable insert is designed primarily for machining steel in medium to heavy turning operations, offering toughness for varying engagement conditions. How does the T9225 grade affect tool life? The T9225 grade combines toughness with wear resistance so the insert exhibits predictable wear and extended life under mixed or slightly interrupted cuts, reducing the frequency of indexings. Which insert geometry suits internal turning and finishing? The rhombic 80° geometry and 0.4 mm corner radius make the insert versatile for external operations and limited internal turning while preserving surface finish and dimensional stability. Is the CPMT 080204 compatible with standard ISO holders? Yes, the insert follows ISO standards; compatibility depends on matching form, relief angle, tolerance class, attachment, size and thickness with the chosen holder. What is the manufacturer SKU for ordering? The manufacturer SKU for this Tungaloy insert is TUN6781061, and the manufacturer item number is 6781061. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated cemented carbide T9225, ISO-compliant rhombic geometry and an 11° clearance angle for consistent performance in medium to heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CPMT 080204 T9225 — ISO turning insert (rhombic, 11° clearance) · Tungaloy CPMT080204 T9225 Tungaloy turning insert is an ISO-standard rhombic indexable insert designed for robust external and internal turning in changing engagement conditions CVD-coated cemented carbide T9225 for durability ISO CPMT 080204 rhombic form for versatile holders 11° clearance angle for secure cutting geometry Reliable cutting performance for medium to heavy steel turning The insert offers a CVD-coated cemented carbide composition that balances hardness with toughness, delivering extended tool life under interrupted cuts and varying engagement. Designed for turning, the geometry and chipbreaker selection support stable chip control and predictable wear behaviour, which reduces unplanned tool changes and improves process efficiency. Compatibility with standard ISO holders is ensured through defined geometry, tolerance and fastening features. Practical fit and mounting for quick tool changes A rhombic plate with an integrated central hole and countersink provides secure seating in appropriate toolholders. The cylindrical hole with single-sided countersink (40°–60°) allows repeatable clamping and straightforward indexation; the plate thickness of 2.38 mm and standardised dimensions make retrofitting into existing tool assemblies uncomplicated. This mechanical fit translates into less setup time and reliable concentricity during external and internal turning operations. Geometry and edge details that support process stability With an included angle of 80° and a corner radius of 0.4 mm, the insert combines strength at the cutting edge with the ability to produce controlled surface finishes. The 11° clearance reduces rubbing and heat build-up, decreasing thermal wear on the insert and the workpiece. These geometry choices make the grade particularly suitable where toughness is required, such as light interruptions or moderate depth of cut when machining steel. Grade characteristics and selection guidance The T9225 grade is a robust universal grade optimised for the mid-to-heavy machining of steel where variable cutting conditions demand greater fracture resistance. Operators are advised to select the chipbreaker and the grade variant that suit the specific workpiece material and stability of the setup. Using a suitable holder and correct clamping torque will preserve the insert seat and support repeatable results across production runs. Contact Metav Werkzeuge for tailored application support and to request availability of Tungaloy inserts; specialists are reachable via info@metav-werkzeuge.com or by phone at +49 2822 7131930 and can advise on holder compatibility and optimal cutting parameters. Technical data Article number: 6781191 Manufacturer SKU: TUN6781191 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Grade/coating: T9225 (CVD-coated) Facts Included angle: 80° Clearance angle: 11° Plate thickness: 2.38 mm Corner radius: 0.4 mm Plate size: 08 Special features Rhombic plate form Cylindrical hole with single-sided countersink (40°–60°) One-sided chipbreaker Suitable for external and internal turning Compatible with ISO-standard holders; fit depends on form, clearance, tolerance, fastening, size and thickness FAQ What applications suit this insert best? This insert is intended for external and internal turning operations, especially in medium to heavy machining of steel where interrupted cuts or varying engagement demand increased toughness. Which material grade and coating are used on the insert? The insert uses a CVD-coated cemented carbide grade T9225, selected for robust performance and wear resistance during steel machining. How does the rhombic form affect holder compatibility? The rhombic geometry follows ISO conventions, so compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching holders that accept CPMT 080204 are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080204 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, ISO-compatible rhombic geometry and reliable clamping features for consistent medium to heavy steel turning. Order original inserts or consult Metav Werkzeuge for application advice and availability. CPMT 080204 T9225 — Indexable Turning Insert for Turning, Tungaloy CPMT080204 T9225 is a rhombic ISO insert designed for external and internal turning in steel, offering a robust universal grade for changing cutting conditions CVD-coated carbide for stable wear resistance 80° rhombic geometry for versatile turning 11° clearance angle for secure cutting engagement 0.4 mm corner radius for fine profile control Consistent performance under variable cutting conditions The T9225 grade is a CVD-coated carbide formulation developed for robust, universal performance in medium to heavy steel machining. Its chemical vapour deposition coating increases surface hardness while preserving substrate toughness, which helps resist built-up edge and extends tool life under interrupted cuts. This results in steadier cycle times and fewer index changes, making the insert suitable where moderate to demanding engagement conditions appear. The described grade supports productive material removal while offering predictable wear behaviour, so setup adjustments can focus on process optimisation rather than compensating for rapid tool degradation. Secure clamping and ISO compatibility for repeatable results Compatibility with toolholders depends on geometry, clearance, tolerance and fastening. The insert features an 80° rhombic geometry, a 0.4 mm corner radius and a 2.38 mm thickness, with a cylindrical hole and one-sided countersink (40°–60°) that help ensure positive locating and clamping stability in a matched holder. The 11° clearance angle reduces rubbing on the flank and supports reliable surface finish when the assembly is correctly matched. These defined dimensions follow ISO norms for indexable turning inserts, so integrating the component into an existing holder system is straightforward provided the form, size and tolerances correspond. Productive machining and practical system design The system build for indexable turning relies on the insert, appropriate external holder or boring bar, and a secure clamping kit with spare screws. The CPMT080204 insert is intended to be used with a compatible chipbreaker and grade selection according to material, cutting mode and machine stability. A one-sided chipbreaker assists in chip control during external and internal turning, reducing the risk of entanglement and improving surface consistency. Choosing this universal carbide grade minimises tool inventory complexity while enabling a wide application range; fewer insert types can cover variable jobs without compromising productivity. Contact Metav Werkzeuge for stock information and tailored machining advice on Tungaloy CPMT080204 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781316 SKU: 6781316-Tungaloy Manufacturer SKU: TUN6781316 Brand: Tungaloy Model series: ISO turning inserts Designation: CPMT080204 Grade: T9225 Material: Carbide Facts Corner radius: 0.4 mm Insert angle: 80° Clearance angle: 11° Thickness: 2.38 mm Size designation: 08 Special features Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker CVD-coated carbide grade for medium to heavy steel Intended application: turning (external & internal) FAQ What holder features are required for correct mounting of the insert? For correct mounting the CPMT080204 Tungaloy indexable turning insert (SKU 6781316-Tungaloy) requires a holder matching the plate form, diameter, thickness 2.38 mm, clearance 11° and the screw/locating design for the cylindrical hole with countersink. Which materials is this grade best suited for? The T9225 grade on the CPMT080204 insert is formulated for robust performance in steel, especially for medium to heavy operations and situations with slightly interrupted cuts where enhanced toughness is beneficial. How does the chipbreaker affect machining performance? The one-sided chipbreaker reduces long swarf and improves chip control during both external and internal turning; using the recommended chipbreaker for the workpiece stability leads to a more consistent surface finish with fewer manual interventions. Is the insert usable for interrupted cuts and mixed engagement conditions? Yes, the CVD-coated carbide composition and T9225 grade are chosen for stable chip formation and increased toughness, making the insert suitable for interrupted cuts and variable engagement during production. What dimensional features influence surface finish and profile accuracy? Key dimensions such as the 0.4 mm corner radius, 80° rhombic geometry and 11° clearance angle determine contact behaviour and flank support, which together influence surface finish and profile fidelity during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a PVD-coated AH6225 grade and a sharp, stable cutting edge for reliable turning of stainless steel in mixed production. Order the CPMT080208 AH6225 insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT080208 AH6225 ISO turning insert for turning, PVD-coated carbide — Tungaloy The CPMT080208 AH6225 is an ISO-format turning insert designed for external and internal turning applications, offering a sharp yet stable cutting edge optimised for stainless steel under medium machining and variable conditions. ISO-sized rhombic insert, 80° included angle PVD-coated carbide grade AH6225 for stainless steel 0.8 mm nose radius for precise chip control Cylindrical hole with one-sided countersink 40°–60° Consistent machining performance and edge stability The insert is part of an ISO series engineered for repeatable results in industrial turning. With a PVD-coated AH6225 grade on a carbide substrate, the geometry combines a sharp cutting edge with edge stability to cope with the work-hardening tendency of stainless steel. This combination reduces chatter and offers a predictable tool life in medium cutting regimes, which supports steady cycle times and fewer unexpected tool changes. Clear numerical specifications and standard form factor ease process planning and quality control. Precise chip control and surface quality Thanks to the one-sided chipbreaker and a 0.8 mm nose radius, the insert delivers controlled chip formation and improved surface finish on turned components. The 11° clearance angle and the plate thickness of 2.38 mm contribute to rigidity and resistance to edge deformation, enabling consistent dimensional accuracy. For shops seeking efficiency, fewer reworks and a lower scrap rate result from the better surface integrity and reduced need for finishing passes. Robust mounting and compatibility for predictable set-up Compatibility with toolholders is governed by form, clearance angle, tolerance class, fixation, size and thickness; the rhombic plate form and cylindrical hole with a single-side countersink (40°–60°) ensure secure seating in suitable holders and boring bars. This standardised interface promotes repeatable clamping and straightforward inventory management across holders, shims and clamping sets. When combined with appropriate replacement screws and a matched holder, the system delivers quick insert changes and reproducible runout control. Application guidance and economical advantages The grade is formulated as a universal option for stainless steel, recommended where medium machining and fluctuating conditions demand a balance between sharpness and robustness. Select the chipbreaker and grade for the specific workpiece and feed conditions to optimise tool life versus cutting speed. The system approach — insert, holder, shim/clamping set and replacement screws — makes integration into existing turning processes simple and supports productive machining with lower total cost of ownership. Request tailored advice from Metav Werkzeuge for the Tungaloy AH6225 inserts to ensure correct holder compatibility and optimal cutting parameters — contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for application support. Technical data Article number: 6903279-Tungaloy Manufacturer SKU: TUN6903279 Manufacturer article number: 6903279 Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade/coating: AH6225 (PVD-coated) Facts Insert designation: CPMT080208 ISO code: 080208 Size: 08 Thickness: 2.38 mm Nose radius: 0.8 mm Clearance angle: 11° Included angle: 80° Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic plate form One-sided chipbreaker Suitable for external and internal turning Designed for stainless steel (universal grade) System setup: insert, holder, shim/clamping set and replacement screws FAQ What materials is this insert suitable for? The CPMT080208 AH6225 insert is designed as a universal grade for stainless steel and performs well under medium machining and variable conditions. How does the chipbreaker affect machining? The one-sided chipbreaker on this insert promotes controlled chip formation and enhances surface finish, reducing secondary operations for turned parts. Which holders are compatible with this ISO insert? Compatibility depends on form, clearance angle, tolerance class, fixation, size and thickness; use holders and boring bars that accept ISO rhombic CPMT inserts with a cylindrical hole and single-side countersink. What advantages does the PVD coating provide? The PVD-coated AH6225 grade combines wear resistance with a sharp cutting edge, offering improved tool life and stable cutting when machining stainless steel. Is the CPMT080208 supplied with screws or clamping parts? The insert is part of a system; the package commonly requires a matching holder, shim/clamping set and replacement screws to complete the assembly for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, PVD-coated AH6225 grade and a stable 80° rhombic geometry to secure predictable performance in medium turning operations; order via Metav Werkzeuge or contact the technical team for compatibility advice. CPMT080208 AH6225 ISO turning insert (80° rhombic) by Tungaloy The CPMT080208 AH6225 is an ISO-standard rhombic turning insert for external and internal turning, designed for medium cutting and optimised for rostfreier Stahl machining. PVD-coated carbide grade AH6225 80° rhombic geometry for stable engagement 0.8 mm corner radius for controlled chip formation Single-sided chipbreaker with centred hole Precision and consistent results for turning operations This insert combines a PVD coating with a wear-resistant carbide substrate, delivering a balance between edge sharpness and stability that suits interrupted cuts and varying conditions. The AH6225 grade is formulated for universal use on rostfreier Stahl, offering reliable edge life during medium machining. The 0.8 mm corner radius reduces peak load while maintaining cutting stability, which helps to produce repeatable part tolerances and reduces the risk of premature edge failure. The result is process stability and fewer tool changes in serial production. Controlled chip formation and edge protection explained The single-sided chipbreaker on this insert promotes predictable chip control for shoulder and profile turning, reducing the likelihood of long, entangling chips. A chipbreaker shapes the fracture and flow of chips at the cutting zone; in practice this improves surface finish and reduces machine downtime for chip clearance. The insert’s PVD layer supports a sharp cutting edge that resists built-up edge formation under varying feeds and speeds, and the rhombic 80° geometry provides a secure seat in the holder for stable cutting forces. Compatibility, mounting and system benefits Compatibility with ISO holders is determined by insert form, clearance angle, tolerance class, fixing method, size and thickness; the CPMT080208 AH6225 is supplied with a centring hole and 40°–60° single-sided countersink to ensure repeatable clamping. The plate thickness of 2.38 mm and the standard 08 size fit common external holders and boring bars designed for ISO-indexable plates. Selecting the correct holder and clamp set ensures the insert’s performance is translated into consistent component quality and predictable tool life. Why this grade suits rostfreier Stahl and variable conditions The AH6225 composition is optimised for rostfreier Stahl, combining toughness with wear resistance to handle adhesive tendencies and work hardening commonly encountered with these alloys. In applications with moderate depths of cut and interrupted cuts, the insert’s combination of PVD coating, edge geometry and chip control reduces process risk and supports higher uptime. For shops focused on repeatability and low set-up effort, this insert represents a pragmatic choice between edge life and surface integrity. Contact Metav Werkzeuge for technical compatibility checks on the CPMT080208 AH6225 insert or request machining recommendations by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6903272 Manufacturer SKU: TUN6903272 SKU: 6903272-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CPMT080208 AH6225 Tungaloy insert Facts Corner radius: 0.8 mm Plate thickness: 2.38 mm Insert angle: 80° Free rake angle: 11° Size designation: 08 Special features Material: cemented carbide (Hartmetall) Coating: PVD-coated (AH6225) Shape: rhombic, 80° Chipbreaker: single-sided Mounting: with centring hole and single-sided countersink (40°–60°) Application: Drehen (turning) Typical system: ISO insert, external holder/boring bar, shim/clamp set and replacement screws FAQ What materials is this insert intended for? The CPMT080208 AH6225 insert is intended primarily for rostfreier Stahl and similar alloys where a balance of edge sharpness and toughness is required. How is the insert clamped in the holder? The insert features a centring hole and a single-sided countersink (40°–60°) to ensure secure, repeatable clamping in ISO-compatible holders for the CPMT080208 AH6225. What does the 0.8 mm corner radius affect in practice? A 0.8 mm corner radius provides a compromise between cutting-edge strength and the ability to achieve good surface finish; for the AH6225 grade this helps maintain stability during medium cutting. Can this insert handle interrupted cuts? Yes, the combination of a robust carbide substrate and the AH6225 PVD coating gives the insert resilience for interrupted cuts and variable machining conditions. Which holder type is recommended for best results? Use an ISO-standard external holder or boring bar sized for the 08 plate, combined with a suitable shim and clamp set, to achieve the intended performance of the CPMT080208 AH6225. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 AH6235 Wendeplatten - Tungaloy
Benefit from a PVD-coated carbide grade that improves edge stability in demanding turning operations and a single-sided chipbreaker that copes with interrupted cuts; order directly via Metav Werkzeuge or consult the specialists for holder compatibility and optimal grade selection. CPMT 080208 AH6235 — ISO turning insert, PVD-coated carbide · Tungaloy The CPMT080208 AH6235 is an ISO rhombic turning insert engineered for external and internal turning, offering a single-sided chipbreaker and a cylindrical hole with one-sided countersink for secure fastening. ISO rhombic geometry for standard holders PVD-coated carbide grade AH6235 for stainless steels Single-sided chipbreaker for interrupted cuts Cylindrical hole with 40°–60° countersink Proven cutting performance for stainless steels and critical edges The combination of a PVD-coated surface and a carbide substrate provides improved edge stability and resistance to notch wear, which is particularly valuable when machining stainless steels or materials prone to built-up edge. The chosen grade delivers a balance between toughness and wear resistance, reducing the risk of premature fracturing during interrupted cuts. This results in longer indexable life and fewer insert changes, supporting continuous production and predictable tool costs. Geometry that secures repeatable clamping and consistent finishes Designed to the ISO series, the rhombic shape and precise geometry ensure compatibility with standard indexable holders; clamping fit depends on form, clearance, tolerance class, fastening method, size and thickness. The insert offers an 11° clearance and an 80° included angle, combined with a 2.38 mm thickness, to provide a stable cutting edge and reduce vibration transmission. These geometric details make it easier to achieve consistent surface quality and repeatable results across batches. Application advantages for turning and interrupted operations The insert is tailored for both external and internal turning, where interrupted or unstable cuts are common; the single-sided chipbreaker supports chip control and mitigates the risk of edge chipping in those conditions. A 0.8 mm radius helps to spread cutting forces over a larger edge area, improving strength at the cutting corner and enabling slightly more aggressive feeds without compromising edge life. This makes the insert suitable for operations where robustness and predictable tool behaviour are priorities. System compatibility and logistic benefits for production environments As part of a conventional ISO insert system, the item integrates with a matching outer holder or boring bar, backing plate/clamping set and replacement screws, simplifying inventory and reordering. Identifiers such as the manufacturer SKU support traceability in procurement and tool management. The combination of a standardised geometry and a robust PVD-coated grade reduces the need for special clamping solutions and helps to maintain steady machining throughput with fewer interruptions. For fast supply and tailored technical advice on the Tungaloy CPMT 080208 AH6235 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for compatibility checks and grade recommendations Technical data Article number: 6903459 SKU: 6903459-Tungaloy Manufacturer SKU: TUN6903459 Designation: CPMT080208 AH6235 Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Facts Corner radius: 0.8 mm Plate thickness: 2.38 mm Clearance angle: 11° Included angle: 80° Size code: 08 Special features Material: carbide Coating: PVD Grade: AH6235 Chipbreaker: single-sided Application: turning (external & internal) System components: insert, holder/boring bar, backing plate/clamping set, replacement screws Compatibility criteria: form, clearance, tolerance class, fastening, size, thickness FAQ Is this insert suitable for stainless steels? Yes. The CPMT080208 AH6235 is a PVD-coated carbide insert formulated for machining stainless steels and for applications with higher break-out risk. Which turning operations are recommended for this type of insert? Suitable operations include external and internal turning, especially where interrupted cuts occur; the single-sided chipbreaker supports chip control in such tasks. How is holder compatibility determined for this insert? Compatibility is governed by the insert form, free (clearance) angle, tolerance class, fastening method, size and thickness; matching these parameters with the chosen ISO holder ensures secure clamping. What is the corner radius and how does it affect machining? The corner radius is 0.8 mm, which increases edge strength and allows more stable cutting under variable engagement, helping to reduce chipping in interrupted or unstable cuts. What fastening style does the insert use? The insert features a cylindrical hole with a one-sided countersink (40°–60°), designed for screw fastening in standard clamping arrangements. Are additional system parts required to use the insert? Yes. A matching external holder or boring bar, a backing plate or clamping set and suitable replacement screws complete the system for safe and repeatable use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide toughness, an 0.8 mm corner radius for edge security and ISO-standard compatibility to maintain steady production in turning operations; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. CPMT 080208 AH6235 – indexable turning insert for turning (PVD-coated carbide, 0.8 mm radius) by Tungaloy The CPMT080208 AH6235 is an ISO-standard rhombic indexable turning insert intended for external and internal turning, designed to handle interrupted cuts and materials with elevated breakout risk while ensuring repeatable clamping and stability ISO rhombic insert CPMT080208 PVD-coated carbide AH6235 for rostfreier Stahl 0.8 mm corner radius for robust edge Cylindrical hole with single-sided countersink 40°–60° Reliable performance for rostfreier Stahl and interrupted cutting The AH6235 grade is a PVD-coated carbide developed for tougher turning tasks, offering enhanced fracture resistance and predictable wear behaviour when machining rostfreier Stahl and similar alloys. The tougher substrate and coating combination reduces notch formation at the cutting edge under interrupted cuts, which translates into fewer insert changes and more stable cycle times. By choosing this grade, machining processes benefit from a reduced risk of chipping during unstable cut entry and exit, which supports consistent component quality and lowers overall process variability. Geometry and clamping that secure repeatability and edge life The rhombic plate geometry with an included angle of 80°, a 0.8 mm corner radius and 11° clearance angle provides a balanced contact zone for both light finishing and heavier profiling passes. The insert is supplied with a cylindrical hole plus a one-sided countersink (40°–60°) for secure, repeatable clamping in compatible holders. These design elements ensure that the cutting edge is supported under load and that positional accuracy is maintained after indexation. Clear, standardised dimensions and tolerance classes make holder selection straightforward, shortening setup time and improving first-off rates. Process economy through wear control and application flexibility The single-sided chipbreaker and the AH6235 composition support reliable chip formation and evacuation in a wide range of turning scenarios, particularly where stability varies or where interrupted cuts are frequent. This leads to longer effective tool life and fewer unscheduled tool changes, which improves productivity and reduces tooling costs per part. The ISO compatibility of the plate simplifies inventory management and allows selection of the correct chipbreaker and grade according to machining stability and workpiece material. For workshops seeking a pragmatic, technically clear solution, this insert delivers a balance of performance and predictable service life. For reliable machining of rostfreier Stahl with improved edge security choose the Tungaloy AH6235 grade — contact Metav Werkzeuge for availability, holder compatibility and application recommendations at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6903455 Manufacturer SKU: TUN6903455 SKU: 6903455-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall (carbide) Facts Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Plate thickness: 2.38 mm Plate size: 08 Special features Grade/coating: AH6235, PVD-coated carbide Plate form: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: Drehen (external and internal turning), interrupted cuts, rostfreier Stahl FAQ What materials is this insert optimised for? The AH6235 grade is optimised for machining rostfreier Stahl and is suitable for interrupted cutting situations where edge toughness is critical. How does the hole and countersink affect clamping? The cylindrical hole with a single-sided countersink (40°–60°) provides secure, repeatable clamping and simplifies positioning in compatible indexable holders. Which chipbreaker type is supplied and why does it matter? A single-sided chipbreaker is provided to promote controlled chip formation; this helps maintain stable cutting when turning under variable conditions. Can the insert be used for both external and internal turning? Yes, the rhombic geometry and ISO standard dimensions make the insert appropriate for both external and internal turning when matched with the correct holder. What details identify this article for ordering and stock management? The article number is 6903455 and the manufacturer SKU is TUN6903455; the full SKU is 6903455-Tungaloy for precise identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 AH725 Wendeplatten - Tungaloy
Take advantage of the universal, PVD‑coated carbide grade and ISO conformity to maintain consistent process security across steel and stainless‑steel turning tasks; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CPMT 080208 AH725 Tungaloy indexable insert — PVD-coated carbide for turning, 0.8 mm corner radius The CPMT080208 is an ISO‑normed indexable turning insert for external and internal turning, offering a universal, breakout‑resistant PVD‑coated carbide grade for mixed‑material production environments. ISO‑normed insert for turning operations PVD‑coated carbide grade AH725 0.8 mm corner radius, single‑sided chipbreaker Rhombic form with central hole and countersink Consistent machining performance for steel and stainless steels The PVD‑coated carbide grade AH725 delivers a balanced combination of wear resistance and toughness, designed specifically for mixed‑material runs. As a result, the insert ensures stable chip formation and reduced risk of edge breakouts when turning stainless steels and various grades of steel. This balance translates into fewer interruptions for tool changes and a steadier production rhythm, which is particularly beneficial for small‑tool setups and operations where process reliability is essential. Clear compatibility and system setup for rapid integration Compatibility with toolholders is determined by geometric and tolerance factors: insert form, relief angle, tolerance class, clamping method, size and thickness. The rhombic geometry and 80° included angle suit a broad range of holders and boring bars, while the central hole with cylindrical seat plus a single‑side countersink facilitates secure fastening. When assembled as a system — insert, suitable external holder or boring bar, shim/clamping set and replacement screws — the result is a robust, repeatable mounting that supports stable cutting conditions and predictable component quality. Simple chip control and application suitability The single‑sided chipbreaker and the 0.8 mm corner radius are optimised for conventional turning tasks where moderate to demanding process security is required. The chipbreaker assists in breaking and evacuating chips reliably, reducing the likelihood of rework and improving surface finish consistency. For operations that alternate between different workpiece materials, this insert provides an economical and productive option without frequent grade swaps. Contact Metav Werkzeuge for tailored application advice and to request the CPMT080208 AH725 Tungaloy indexable insert; telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6864988 Manufacturer SKU: TUN6864988 Distributor SKU: 6864988-Tungaloy Series: ISO‑turning indexable inserts Numbers / Core technical data Corner radius: 0.8 mm Thickness: 2.38 mm Insert size: 08 Relief angle: 11° Included angle: 80° Designs / Special features Carbide substrate with PVD coating, grade AH725 Rhombic insert shape (CPMT) Central hole with cylindrical seat and single‑side countersink (40°–60°) Single‑sided chipbreaker ISO‑normed for external and internal turning FAQ Which materials is this insert suitable for? The CPMT080208 AH725 Tungaloy indexable insert is optimised for machining steel and stainless steels, offering breakout resistance and reliable performance across changing workpiece materials. How is holder compatibility assured? Compatibility depends on form, relief angle, tolerance class, clamping type, size and thickness; the rhombic CPMT shape and the specified dimensions allow selection of matching holders and boring bars for secure mounting. What chip control can be expected? The single‑sided chipbreaker provides dependable chip segmentation and evacuation, helping to maintain surface quality and reduce the need for secondary operations when using the AH725 grade. Can the insert be used for both external and internal turning? Yes — the geometry and hole design make the insert suitable for external turning and for use in boring bars for internal turning, provided the correct holder and clamping parts are used. What identifiers should be referenced when ordering or specifying the insert? Use the article number 6864988 or the manufacturer SKU TUN6864988 to ensure the correct CPMT080208 AH725 Tungaloy indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 AH725 Wendeplatten - Tungaloy
Take advantage of the PVD‑coated AH725 grade and the precise 0.8 mm nose radius to secure consistent chip control and high process stability when turning Stahl and rostfreier Stahl; the ISO rhombic form ensures broad compatibility with standard holders, so order the insert directly via Metav Werkzeuge or consult our specialists for tool-holding pairing. CPMT080208 AH725 turning insert (ISO 080208) by Tungaloy — PVD-coated carbide, 0.8 mm nose radius CPMT080208 AH725 is an ISO‑standard rhombic turning insert optimised for reliable external and internal turning where consistent chip control and process security are required PVD-coated AH725 for robust performance 0.8 mm nose radius for accurate profiles ISO rhombic form CPMT 080208 compatibility Cylindrical hole with 40°–60° countersink Consistent cutting performance for demanding turning tasks The PVD‑coated carbide grade AH725 combines toughness and wear resistance to deliver stable chip formation and reduced risk of edge chipping under mixed cutting conditions. With a 0.8 mm nose radius and an 80° insert angle, this geometry supports accurate profile generation while maintaining dimensional stability across short to medium‑length tool paths. The combination of grade and geometry results in measurable improvements in process reliability, especially when machining Stahl and rostfreier Stahl, where variable workpiece properties demand an all‑round, break‑resistant solution. Faster setup and predictable tool life through ISO compatibility The ISO designation and rhombic format simplify tool selection and reduce setup time: the insert fits standard ISO holders by matching form, clearance angle, tolerance class, fixing and thickness. The 11° clearance angle and single‑sided chipbreaker work together to promote consistent swarf control and surface quality, cutting down rework and machine idle time. For production environments that prioritise throughput, this yields an improved cost‑to‑performance ratio by lowering scrap rates and stabilising cycle times while ensuring repeatable results. Practical guidance on selection and material coverage Choose the AH725 variant when machining a range of steels or when frequent changes between materials occur; the universal, out‑break resistant character of the grade makes it suitable for variable demands without sacrificing process security. The rhombic form and the cylindrical hole with one‑sided countersink (40°–60°) permit secure clamping in common toolholders and facilitate reliable seat location. For internal and external turning tasks that require a balance of edge strength and surface finish, the insert offers a sensible compromise between robustness and precision. For specialist advice on matching Tungaloy AH725 inserts to specific turning operations and to order through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856773 SKU: 6856773-Tungaloy Manufacturer SKU: TUN6856773 Model series: ISO turning inserts Designation: CPMT080208 AH725 Manufacturer: Tungaloy Core data Nose radius: 0.8 mm Thickness: 2.38 mm Clearance angle: 11° Insert angle: 80° Size: 08 ISO code: 080208 Special features PVD-coated carbide (AH725) Universal, out‑break resistant grade for Stahl and rostfreier Stahl Rhombic insert form (CPMT) Single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) Application: turning (external and internal) Compatibility determined by form, clearance, tolerance, fixing, size and thickness FAQ Which materials is this insert suited to machine? The CPMT080208 AH725 insert by Tungaloy is designed as a universal, out‑break resistant grade suitable for machining a wide range of Stahl and rostfreier Stahl workpieces. Can the insert be used for internal turning as well as external turning? Yes, the geometry and single‑sided chipbreaker enable the insert to perform in both external and internal turning operations when installed in a compatible ISO holder. What coating and substrate does the insert use? The insert features a PVD coating on a carbide substrate; the AH725 specification emphasises toughness and reliable edge integrity under variable cutting conditions. How does the ISO designation help with tool selection? The ISO code 080208 and CPMT form indicate standardised dimensions and clamping interfaces, which simplifies holder selection and reduces setup complexity across common turning tool systems. What are the key dimensions and the manufacturer SKU for ordering? Key dimensions: 0.8 mm nose radius, 2.38 mm thickness, 11° clearance angle; Manufacturer SKU: TUN6856773. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance, precise rhombic geometry and stable cutting clearance for reliable finishing operations; order the inserts directly via Metav Werkzeuge or consult our specialists for holder compatibility. CPMT080208 AT9530 Tungaloy turning insert — rhombic 80°, 11° clearance The CPMT080208 AT9530 is a rhombic ISO turning insert designed for finishing and light turning of steel, offering a balance of surface quality and predictable wear. Coated cermet grade AT9530 Rhombic 80° ISO geometry 11° clearance for stable cutting 0.8 mm corner radius for refined finish High-quality finishing and even wear for production environments The AT9530 coated cermet grade delivers stable cutting behaviour and is optimised for finishing and light machining of steel, where consistent surface quality matters. The combination of the coating and cermet substrate reduces built-up edge and promotes even wear, which in turn helps to maintain dimensional accuracy across runs. For process planners, this means fewer unexpected insert changes and a more predictable production flow, improving overall throughput without compromising the finish. Geometry and clearance that support reliable turning operations The rhombic 80° geometry and 11° clearance provide a stable cutting engagement that is well suited for both external and internal turning when a smooth contour and low vibration are required. The insert’s 0.8 mm corner radius aids in producing finer surface finishes while also distributing cutting forces to reduce localised wear. Compatibility with ISO holders is defined by the insert’s form, relief angle, tolerance class, clamping method, size and thickness, so correct holder selection is essential for extracting the full potential of the tool. Efficiency and reduced set-up time through standardised components As part of the ISO turning insert family, the plate integrates into established tool systems with standard underlays, clamping sets and screws. The central hole with a cylindrical bore and a single-sided countersink (40°–60°) allows reproducible positioning and secure clamping; this contributes to shorter set-up procedures and more consistent repeatability. The single-sided chipbreaker is tailored to finishing cuts, guiding chips away from the cutting zone and supporting uninterrupted machining cycles. Practical selection advice for the workshop and toolroom Select the chipbreaker and grade according to workpiece material, cutting strategy and machine stability: the AT9530 variety is particularly suited to achieving excellent surface quality on steel with low to moderate depths of cut. For unstable set-ups or heavier cutting conditions, a different chip control or a more robust grade may be preferable. The insert thickness of 2.38 mm and the ISO plate size should be matched to the holder specifications to ensure correct clamping and optimal tool life. Consult Metav Werkzeuge for tailored recommendations on Tungaloy CPMT080208 AT9530 inserts and compatible holders; contact +49 2822 7131930 or email info@metav-werkzeuge.com to discuss requirements and availability Technical Data Article number: 6773734 Manufacturer SKU: TUN6773734 Label: CPMT080208 AT9530 Tungaloy-insert Facts Corner radius: 0.8 mm Plate size: 08 Plate thickness: 2.38 mm Relief angle: 11° Hole: cylindrical hole with single-sided countersink (40°–60°) Geometry angle: 80° Special features Grade: AT9530 coated cermet Material: carbide Application: finishing and light turning of steel Chipbreaker: single-sided ISO series: ISO turning inserts FAQ What is the CPMT080208 AT9530 best used for? The CPMT080208 AT9530 insert is intended for finishing and light turning of steel, prioritising surface finish and even wear in serial production. What material and coating does the grade AT9530 use? AT9530 is a coated cermet grade that combines a hard substrate with a specialised coating to reduce built-up edge and improve wear resistance during finishing operations. How does the insert locate and clamp in the holder? The plate is supplied with a cylindrical hole and a single-sided countersink (40°–60°) for positive location; compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness. Which features help to achieve a finer surface finish? The 0.8 mm corner radius and the rhombic 80° geometry reduce surface waviness and distribute cutting forces, while the AT9530 cermet grade minimises built-up edge for smoother results. What is the manufacturer SKU and article number for procurement? The manufacturer SKU is TUN6773734 and the article number is 6773734, useful for ordering and verifying the exact item. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade and precise ISO geometry for improved surface quality and extended tool life; the insert is compatible with standard ISO holders for fast changeover. Order or request advice via Metav Werkzeuge for tailored machining guidance. CPMT 080208 GT9530 ISO turning insert by Tungaloy — coated cermet, 0.8 mm corner radius, for turning The CPMT080208 GT9530 is an ISO‑standard rhombic turning insert designed for finishing and light universal turning of steel under stable machining conditions. Coated cermet GT9530 for improved wear resistance Rhombic ISO insert CPMT 08, 11° relief 0.8 mm corner radius for fine surface finish Central hole with countersink (40°–60°) Superior surface quality and longer tool life for finishing operations The combination of a coated cermet grade and a carefully controlled geometry delivers notably improved surface finish and longer tool life during finishing and light turning of steel. The cutting material is optimised for wear resistance and consistency, which reduces edge degradation over time. This results in fewer insert changes, steadier production output and better repeatability on parts that demand tight surface specifications. Fast, reliable ISO compatibility reduces set‑up time Built to ISO dimensions, the rhombic form with an 08 size and 11° relief ensures predictable seating and repeatable clamping in standard external holders. The standardised geometry simplifies inventory management and quick insert replacement, lowering machine downtime. The central fixing arrangement and dimensional conformity mean the cutting edge aligns consistently, supporting efficient tool changes and steady production cycles. Practical machining guidance for best results The 0.8 mm radius is tailored to produce a fine surface while maintaining robustness against small interruptions in feed; it is ideal for finishing passes and light general‑purpose work with steels. Select a matching single‑sided chipbreaker and the GT9530 grade to exploit the coating’s wear characteristics. Stable workholding and moderate feeds will maximise the grade’s advantage: good surface quality with extended service life under steady conditions. Secure mounting and system considerations for dependable performance The insert’s central hole with a cylindrical bore and one‑sided countersink (40°–60°) provides secure clamping and precise seating on the pocket seat. The 2.38 mm thickness and 80° insert angle contribute to stiffness in the cutting system, while the 11° relief supports effective chip flow and reduced rubbing. These features combine to deliver a reliable, repeatable cutting solution when paired with ISO‑compliant holders and correct clamping hardware. Contact Metav Werkzeuge for application support or to request the Tungaloy CPMT080208 GT9530; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders, chipbreakers and cutting strategies Technical data Article number: 6998319 Manufacturer article number: 6998319 SKU: 6998319-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: CPMT080208 Grade/coating: GT9530 Cutting material type: coated cermet Substrate material: cemented carbide Core technical figures Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 11° Insert angle: 80° Size: 08 Special features Rhombic insert form, single‑sided indexable plate Central hole with cylindrical bore and one‑sided countersink (40°–60°) Single‑sided chipbreaker Suited to finishing and light universal turning of steel ISO‑standard geometry for compatibility with external holders FAQ What materials is this insert intended for? This insert is specified for turning of steel in finishing to light universal operations; the GT9530 coated cermet grade provides wear resistance suited to stable machining conditions. Which holder types are compatible with the insert? Compatibility depends on the holder pocket matching the ISO geometry — form, clearance angle, tolerance class, fastening and thickness; the ISO designation CPMT080208 ensures suitability with standard external turning holders designed for CPMT‑type inserts. How does the GT9530 coating affect performance? The GT9530 coating enhances wear resistance and helps maintain edge integrity during finishing passes, which contributes to a more consistent surface finish and extended interval between indexings. Is the 0.8 mm radius suitable for light roughing? A 0.8 mm radius is optimised for fine surface quality and finishing; for heavier roughing it is preferable to select an insert and grade intended specifically for high material removal rates. What clamping hardware is recommended for secure mounting? Use the manufacturer‑recommended clamping set for CPMT inserts; the central hole with countersink secures the plate reliably when used with the correct screw and clamp system for the holder pocket. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 GT9530 Wendeplatten - Tungaloy
Take advantage of the GT9530 grade for reliable finishing and extended tool life; the combination of coated cermet performance and ISO compatibility supports consistent production quality. Order the insert directly via Metav Werkzeuge or consult the specialists for holder compatibility and application advice. CPMT 080208 GT9530 ISO turning insert — coated cermet, 0.8 mm corner radius (Tungaloy) The CPMT080208 GT9530 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a wear‑resistant cermet grade for fine finishing and longer tool life. Coated cermet grade GT9530 for long life ISO‑standard CPMT 080208 form for quick replacement 0.8 mm corner radius for fine surface finish Rhombic insert with central hole and 11° clearance Higher productivity through a wear‑resistant cermet grade The coated cermet composition GT9530 is tailored for finishing and light universal turning where surface quality and tool longevity matter. The hard, wear‑resistant coating reduces flank wear and maintains cutting edge integrity under stable machining conditions, which translates into fewer insert changes and improved machine uptime. This results in measurable gains in process stability and consistent part quality when finishing steel components. Consistent clamping and repeatable results Designed to the ISO standard, the rhombic form ensures compatibility with a wide range of ISO holders; the central hole combined with a cylindrical hole plus single‑side countersink (40°–60°) gives secure mechanical location and repeatable clamping. The specified 11° clearance angle and robust geometry deliver predictable chip flow and reduced vibration, helping to sustain dimensional accuracy across batches. These design choices reduce set‑up time and support reproducible results in series production. Practical workshop advantages and application focus With a 0.8 mm corner radius and a plate thickness of 2.38 mm, the insert suits fine finishing tasks and light‑duty general turning of steel, where surface finish and tool life are priorities. The one‑sided chipbreaker is optimised for single‑direction cutting forces, aiding chip control during both external and internal turning operations. As part of a system (insert, holder, shim, screws), the geometry and grade simplify inventory decisions and contribute to a more efficient tooling strategy on the shop floor. For precision finishing with the GT9530 grade, contact Metav Werkzeuge for application guidance and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998313 SKU: 6998313-Tungaloy Manufacturer SKU: TUN6998313 Brand: Tungaloy Model series: ISO turning indexable inserts Data Corner radius: 0.8 mm Plate thickness: 2.38 mm Included angle: 80° Clearance angle: 11° Size: 08 Special features Coated cermet GT9530 Rhombic shape (CPMT) Central cylindrical hole with single‑side countersink (40°–60°) One‑sided chipbreaker Suitable for external and internal turning Material: carbide ISO‑standard compatibility; requires matching holder, shim and screws FAQ Which materials can be machined with this insert? The CPMT080208 GT9530 Tungaloy indexable insert (SKU 6998313-Tungaloy) is optimised for machining steel in finishing and light universal turning; the cermet grade emphasises surface quality and wear resistance. Is the insert compatible with standard ISO holders? Yes — the CPMT080208 form follows ISO dimensions and locational features, so compatibility is determined by holder form, clearance, tolerance class and clamping method. What does the one‑sided chipbreaker mean for cutting behaviour? A one‑sided chipbreaker on this insert promotes controlled chip formation in the intended cutting direction, improving chip evacuation and contributing to consistent surface finish during turning operations. How does the 0.8 mm corner radius affect surface quality? A 0.8 mm corner radius balances edge strength and surface finish: it supports fine finishing with reduced risk of edge chipping while enabling a smoother part surface compared with sharper radii. What clamping features ensure repeatable mounting? The central hole with a cylindrical bore and single‑side countersink (40°–60°) secures the insert in the seat and, together with ISO form conformity, enables repeatable positioning and reliable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO compatibility and stable chip control for reliable turning results; order the insert directly via Metav Werkzeuge or ask our consultants for matching advice. CPMT080208 NS9530 Tungaloy turning insert (uncoated cermet, 80° rhombic) The CPMT080208 NS9530 is an ISO‑standard rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for excellent surface quality. ISO rhombic insert, 80° cutting angle Uncoated cermet grade NS9530 for finishing Sharp edge reduces cutting forces and improves finish Cylindrical hole with 40°–60° countersink for secure clamping Achieve consistent, high-quality surface finishes with a finishing‑grade cermet The insert is made in the NS9530 uncoated cermet grade and is optimised for finishing steel under continuous cutting conditions and small depth‑of‑cut passes. The fine, sharp cutting edge results in low cutting forces and a notably high surface finish, which reduces the need for secondary grinding or polishing operations. For shops prioritising consistent part quality, the combination of edge geometry and material composition supports repeatable results and less rework. ISO compatibility simplifies tool selection and machine setup Being an ISO‑standard insert, the geometry and dimensions are compatible with a wide range of holders when matched by shape, relief angle, tolerance class, fastening method, size and thickness. The plate’s 80° angle and 11° relief ensure predictable cutting engagement and clearance, while the 0.8 mm corner radius supports fine finishing without compromising edge strength. Specifying an ISO insert streamlines procurement and reduces tooling complexity across mixed fleets of lathes. Secure mounting and controlled chip formation for more productive cycles The insert features a single‑sided chipbreaker and a cylindrical hole with a one‑sided countersink (40°–60°), which together deliver reliable chip control and secure clamping. Stable chip evacuation lowers the risk of workpiece damage and reduces machine downtime, while robust fixation reduces micro‑movement at the cutting edge, preserving dimensional accuracy over longer runs. The system approach—insert plus appropriate external holder or boring bar, shim/clamp set and replacement screws—ensures safe, productive operation. Material and grade selection that supports finishing strategies As a finishing grade, NS9530 balances edge sharpness with wear resistance appropriate for steel components. The cermet composition maintains a crisp cutting edge that benefits soft to medium hardness steels under continuous feeds. This results in reduced burr formation and a cleaner part profile, enabling tighter tolerances without excessive feed reductions. For applications demanding higher metal removal, selection of a more robust grade or a coated alternative should be considered. Practical applications and system considerations The insert is suitable for both external and internal turning operations where fine surface integrity and low cutting forces are priorities. Typical setups pair the ISO insert with a suitable external holder or boring bar; ensure the holder matches the plate form, size and fastening style. For shallow finishing passes and profile work, the 0.8 mm radius and sharp edge deliver clear benefits in achieving final part specifications with fewer passes. Contact Metav Werkzeuge for availability and expert advice on tool matching for Tungaloy inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6998456 SKU: 6998456-Tungaloy Manufacturer SKU: TUN6998456 Model series: ISO turning inserts Facts Cutting angle: 80° Corner radius: 0.8 mm Relief angle: 11° Plate thickness: 2.38 mm Plate size: 08 Special features Rhombic plate form (CPMT) Grade: NS9530 (uncoated cermet) Single‑sided chipbreaker With hole: cylindrical hole + one‑sided countersink (40°–60°) Intended application: turning (external and internal) Typical system: ISO insert with external holder or boring bar, shim/clamp set and replacement screws FAQ What machining tasks is this insert best suited for? The CPMT080208 NS9530 insert is intended primarily for finishing operations on steel where a high surface finish and low cutting forces are required; it is suitable for both external and internal turning. How does the NS9530 grade affect cutting performance? The NS9530 uncoated cermet provides a sharp cutting edge and good wear behaviour in continuous finishing applications, enabling improved surface quality and reduced burr formation compared with standard grades. Can the insert be used in standard ISO holders? Yes, the CPMT080208 is an ISO‑standard insert; compatibility depends on matching the holder’s form, relief angle, tolerance class, fastening method, size and thickness. What clamping arrangement is required for secure mounting? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) and is designed to be fixed with the appropriate clamp set and screws to ensure stable, vibration‑resistant mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 NS9530 Wendeplatten - Tungaloy
Combining the NS9530 uncoated cermet grade with the ISO rhombic CPMT080208 form and a 0.8 mm corner radius delivers low cutting forces and an outstanding surface finish in turning applications; order directly via Metav Werkzeuge or contact our consultants for application advice. CPMT 080208 NS9530 Tungaloy turning insert — ISO CPMT, uncoated cermet, 80° The CPMT080208 NS9530 Tungaloy insert is an ISO-standard rhombic turning insert designed for finishing cuts on steel, offering a sharp cutting edge and consistent surface quality. ISO rhombic insert, 80° cutting geometry NS9530 uncoated cermet, finishing grade Sharp cutting edge for superior surface finish 0.8 mm corner radius, with central hole & countersink Optimised finishing for steel components The insert is engineered as a finishing grade for steel, utilising the NS9530 uncoated cermet to achieve a sharp cutting edge and low cutting forces. These properties reduce vibration during continuous cuts and encourage a stable cut formation, which in turn leads to a consistent surface finish and less rework. The combination of a fine cutting geometry and the cermet cutting material makes this solution especially effective where small depths of cut and high-quality part appearance are required. Secure seating and predictable fit in holders Compatibility with clamping systems is determined by the insert’s form, relief angle, tolerance class, attachment style, size and thickness. The rhombic 80° geometry and 11° relief angle allow predictable seating in ISO-compatible holders and boring bars. The insert’s central hole with a cylindrical bore and a one-sided countersink (40°–60°) ensures repeatable clamp engagement and reliable orientation, supporting steady production runs and reducing downtime associated with misfits. Geometry and dimensions that support consistent performance With a 0.8 mm corner radius and a 2.38 mm thickness, the insert balances edge strength with the finesse required for finishing operations. The rhombic form distributes cutting loads efficiently, while the nominal 80° cutting angle provides a compromise between strength and accessibility on profiles. These dimensional choices contribute to process stability and predictable tool life when paired with the appropriate holder and cutting parameters. Selecting this grade for production reliability The uncoated cermet composition of this grade favours continuous cutting and small feeds, delivering excellent surface quality without the need for additional coating layers. Where process reliability and repeatable part quality matter most, this insert’s specification supports manufacturers aiming for productivity and surface integrity. For advice on matching the grade and chipbreaker to a particular steel alloy or machining strategy, Metav Werkzeuge’s technical team provides application-oriented recommendations. Contact Metav Werkzeuge for tailored machining recommendations and current availability of the CPMT080208 NS9530 Tungaloy insert. Technical data Article number: 6998449 Manufacturer SKU: TUN6998449 Our SKU: 6998449-Tungaloy Model series: ISO turning inserts Designation: CPMT080208 NS9530 Material: cemented carbide Facts Shape: rhombic Size: 08 Cutting angle: 80° Corner radius: 0.8 mm Relief angle: 11° Thickness: 2.38 mm Special features Uncoated cermet grade NS9530 Central hole with cylindrical bore and one-sided countersink (40°–60°) Single-sided chipbreaker Suitable application: Turning FAQ What materials is this insert best suited for? The CPMT080208 NS9530 insert is formulated as a finishing grade for steel; the NS9530 uncoated cermet excels in continuous cuts and small depths of cut on steel workpieces. How does the insert secure in the holder? Retention is via the central hole with a cylindrical bore and a one-sided countersink (40°–60°); the rhombic form, relief angle and thickness ensure a repeatable fit in ISO-compatible holders. Can the insert be used for roughing operations? This grade and geometry are optimised for finishing; for heavy roughing, a tougher grade or a different geometry would be preferable to withstand higher cutting forces. What surface quality can be expected with this insert? Thanks to the sharp cutting edge of the NS9530 uncoated cermet, the insert provides high surface quality in finishing passes when combined with appropriate feeds and speeds. Is the CPMT080208 compatible with standard ISO CPMT holders? Yes — compatibility is governed by the ISO form, relief angle, tolerance class, attachment style, size and thickness; the CPMT080208 conforms to ISO specifications for this type. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, CVD-coated carbide wear resistance and a precise 0.8 mm corner radius for dependable cast-iron turning—order genuine inserts via Metav Werkzeuge or consult our technical team for application support. CPMT 080208 T5115 turning insert by Tungaloy (ISO, CVD-coated) CPMT080208 T5115 is an ISO-format rhombic turning insert designed for external and internal turning, optimised for cast-iron machining with a 0.8 mm corner radius and a CVD-coated carbide grade. ISO-compliant rhombic insert CVD-coated carbide for wear resistance 0.8 mm corner radius for precise profiling Cylindrical hole with 40°–60° countersink Consistent wear life for cast-iron production The CVD-coated T5115 grade combines wear resistance with edge stability to deliver repeatable performance when machining cast iron. The CVD process deposits a hard coating onto the substrate, which reduces flank wear and extends service intervals compared with uncoated grades. For production environments this translates into fewer tool changes, more predictable cycle times and improved process efficiency while maintaining acceptable surface finish and dimensional control. Geometry tuned for accuracy and surface quality A 0.8 mm corner radius and rhombic form provide a balanced compromise between cutting-edge strength and surface finish; a larger radius increases edge robustness, while this specific radius still allows accurate profiling of radii and shoulders. The 11° clearance angle reduces rubbing on the flank, helping to avoid built-up edge and thermal damage. The insert’s 2.38 mm thickness and central hole with countersink ensure secure clamping, supporting stable cutting under varying feed and depth conditions for consistent part quality. ISO compatibility and practical system benefits As an ISO-standard indexable insert, compatibility with holders depends on form, clearance, tolerance class, fixing method, size and thickness; this allows straightforward replacement in established tool systems and simplifies inventory management. The insert features a one-sided chipbreaker tailored for reliable chip control in turning, reducing risk of entanglement and improving machine uptime. Together, these attributes support economic machining by lowering set-up time and enabling predictable tool consumption in repetitive turning operations. Contact Metav Werkzeuge for application advice and to secure genuine Tungaloy CPMT080208 T5115 turning inserts for reliable cast-iron machining Technical data Article number: 6864768 Manufacturer SKU: TUN6864768 SKU: 6864768-Tungaloy Core specifications Corner radius: 0.8 mm Clearance angle: 11° Thickness: 2.38 mm Insert size: 08 Included angle: 80° Features & applications Shape: rhombic Grade/coating: T5115 (CVD-coated carbide) Chipbreaker: one-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Application: Turning Series: ISO indexable inserts Material: carbide FAQ What materials is the insert suited for? The CPMT080208 T5115 insert from Tungaloy is engineered primarily for cast iron, with the T5115 grade offering a balanced mix of wear resistance and edge stability for this material class (SKU: 6864768-Tungaloy). How does the corner radius affect the machining result? A 0.8 mm corner radius increases the cutting edge strength and reduces the risk of chipping while still allowing accurate profiling; this improves surface consistency and prolongs edge life in demanding turning tasks. Which holders are compatible with this insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fixing style, size and thickness; use holders specified for ISO rhombic inserts with matching dimensions and mounting arrangements. Can the insert be indexed to a fresh cutting edge? Yes, the insert is an indexable ISO insert and can be rotated or replaced at the planned index positions to restore cutting performance without replacing the whole toolbody. What clamping style does the insert require? The insert uses a central cylindrical hole with a single-side countersink (40°–60°) for positive clamping; this ensures stable seating and repeatable clamping torque in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, an ISO‑standard geometry and a compact 0.8 mm corner radius for reliable stainless steel turning; order directly via Metav Werkzeuge or consult our specialists for application support. CPMT 080208 T6215 ISO turning insert for stainless steel — Tungaloy, CVD‑coated carbide The CPMT 080208 T6215 is an ISO‑standard rhombic turning insert designed for stable to lightly interrupted turning of stainless steels, offering dependable wear resistance and predictable chip control. CVD‑coated carbide grade T6215 Optimised for stainless steel turning Rhombic plate with 0.8 mm corner radius Central hole with 40°–60° countersink High productivity through wear‑resistant coating and grade The combination of a CVD‑coating with a wear‑resistant carbide substrate in grade T6215 provides extended tool life under continuous and lightly interrupted turning conditions. Because the coating improves thermal and abrasive resistance, tool change intervals are reduced and process stability is increased; this leads to fewer interruptions on the shop floor and a more predictable production flow. The result is efficient machining with consistent surface finish and extended cutting performance for a wide range of rostfreier Stahl components. Precise geometry for secure clamping and holder compatibility The insert follows ISO geometry rules; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness. The rhombic plate features an included angle of 80°, a clearance angle of 11° and a plate thickness of 2.38 mm, ensuring secure seating and repeatable locating in compatible external holders or boring bars. Because the insert has a central hole with a cylindrical bore and a one‑sided countersink (40°–60°), correct clamping with the matching screw and shim set guarantees stable cutting conditions and minimises vibration. Application benefits for stainless steel turning and chip control This grade and geometry combination is tailored to turning rostfreier Stahl: the single‑sided chipbreaker and the modest corner radius of 0.8 mm support controlled chip formation while avoiding excessive cutting forces that can lead to work hardening. Select the chipbreaker and grade according to the workpiece material, machining strategy and machine rigidity to obtain the best compromise between surface quality and tool life. In practical terms, this insert is appropriate for general external and internal turning tasks where consistent removal rates and surface integrity are required. System setup, handling and spare parts guidance An operational system consists of the ISO turning insert, a suitable external holder or boring bar, an underlay/clamp set and replacement screws. The CPMT080208 insert (manufacturer item 6903084, manufacturer SKU TUN6903084) is delivered ready for installation; ensure the matching clamping hardware is specified by form and tolerance to preserve repeatability. Regular inspection of the cutting edge and adherence to recommended speeds and feeds for rostfreier Stahl will extend service life and maintain process reliability. For uncertain applications or complex alloys, request machining parameters from our technical team to align the insert choice with production goals. For availability, technical parameter guidance or to source matching holders and consumables for the Tungaloy CPMT 080208 T6215, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑focused advice. Technical data Article number: 6903084 Manufacturer SKU: TUN6903084 SKU: 6903084-Tungaloy Manufacturer: Tungaloy Facts Plate thickness: 2.38 mm Corner radius: 0.8 mm Included angle: 80° Clearance angle: 11° Plate size: 08 Special features CVD‑coated carbide Grade T6215 Rhombic plate form Central cylindrical hole with one‑sided countersink (40°–60°) Single‑sided chipbreaker ISO turning insert Application: Turning FAQ What materials is this insert intended to machine? The CPMT 080208 T6215 insert from Tungaloy is optimised for machining rostfreier Stahl (stainless steel) under stable to lightly interrupted turning conditions. Which holders are compatible with this ISO insert? Compatibility is achieved with holders that match the CPMT geometry, 80° included angle, 11° clearance and 2.38 mm thickness; the insert is designed to fit standard ISO rhombic external holders when clamped with the correct shim and screw. What is the purpose of the central hole and countersink? The central cylindrical hole with a one‑sided 40°–60° countersink secures the insert axially and locates it repeatably in the seat, improving clamping stability for consistent cutting with the Tungaloy CPMT 080208. How does the T6215 grade affect performance? Grade T6215 combines a durable carbide substrate with a CVD coating to enhance abrasive and thermal resistance, resulting in improved tool life and steady performance when turning stainless steels. Which chipbreaker should be chosen for stainless steel applications? For rostfreier Stahl, select a chipbreaker that promotes short, controllable chips in the required cutting conditions; the CPMT 080208 insert is supplied with a single‑sided chipbreaker suited to general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 080208 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a precise 0.8 mm nose radius, and ISO compatibility for reliable stainless-steel turning; order directly via Metav Werkzeuge or consult our specialists for application advice. CPMT 080208 T6215 rhombic turning insert by Tungaloy — CVD-coated carbide, 80° geometry The CPMT080208 T6215 is an ISO-standard rhombic insert designed for external and internal turning of stainless steel under stable to slightly interrupted conditions CVD-coated carbide grade T6215 Rhombic 08 form, 80° included angle 0.8 mm nose radius for versatile profiles One-sided chipbreaker for controlled chips High wear resistance for stainless-steel turning The CVD-coated carbide grade T6215 offers notably improved wear resistance compared with uncoated grades, which translates into longer tool life and fewer index changes. The coating reduces adhesion and flank wear when machining stainless steel; this means more consistent surface quality over longer production runs. The 0.8 mm nose radius provides a balance between robust cutting edge strength and the ability to produce fine external profiles, while the 80° geometry supports both roughing and finishing passes with predictable engagement. Easy integration with ISO holders and modular tool systems Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. The rhombic 08 shape and the ISO-standard designation make the insert straightforward to fit into matching external holders or a suitable boring bar. The insert is supplied as part of a system that uses a shim/locking set and replacement screws; selecting the correct seat and clamping components avoids misalignment and ensures repeatable clamping. The insert’s thickness of 2.38 mm and the 11° relief angle are important parameters when matching replacement plates to existing toolposts. Reliable chip control and stability in production The single-sided chipbreaker is designed to produce compact, manageable chips when turning stainless steels with moderate to stable cut conditions. Effective chip formation reduces the risk of built-up edge and enhances surface finish; for interrupted cuts the grade’s toughness contributes to edge security. The central cylindrical hole with a single-sided countersink (40°–60°) ensures secure fastening and accurate seat positioning, which supports vibration damping and consistent cutting forces on the machine. Practical recommendations and application areas This insert is best used for general-purpose external and internal turning operations where stainless steel is the primary workpiece material and a balance of wear resistance and edge integrity is required. Choose a matching holder with correct seat form and clamp geometry, and select cutting data aligned with stable cutting conditions for optimum tool life. For specialised applications or intermittent heavy interruptions, consider toolpath strategy adjustments or alternative grades; technical advisors at Metav Werkzeuge can assist with parameter selection and process optimisation. For procurement and tailored application advice on the Tungaloy CPMT 080208 T6215 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, practice-oriented support and availability information Technical data Article number: 6903088 Manufacturer SKU: TUN6903088 Model series: ISO-Drehwendeschneidplatten Label: CPMT080208 T6215 Tungaloy-Wendeplatte Core specifications Insert designation: CPMT080208 Grade/coating: T6215 — CVD-coated carbide Nose radius: 0.8 mm Relief angle: 11° Thickness: 2.38 mm Size: 08 Included angle: 80° Hole: with cylindrical hole + single-sided countersink (40°–60°) Special features Rhombic plate form One-sided chipbreaker ISO-standard turning insert Suitable for turning stainless steel under stable to slightly interrupted conditions Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness System components: matching external holder or boring bar, shim/locking set and replacement screws FAQ What materials is this insert intended for? The Tungaloy CPMT 080208 T6215 insert is designed primarily for machining stainless steel and performs best under stable to slightly interrupted turning conditions. How should the insert be secured in the holder? Use the matching ISO holder designed for rhombic 08 inserts; the insert features a cylindrical hole with a single-sided countersink to ensure secure fastening and correct seating. What does the T6215 grade offer compared with uncoated grades? Grade T6215 uses a CVD coating on a carbide substrate to improve wear resistance and reduce adhesion when turning stainless steel, resulting in longer life and more consistent surface finishes. Is this insert suitable for internal and external turning? Yes, the rhombic 08 geometry and 80° included angle make it suitable for both external and internal turning operations with appropriate holder selection. Which chip control can be expected with this insert? The one-sided chipbreaker promotes compact chip formation and better control during continuous cuts, improving machining stability and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T9215 and a 0.8 mm corner radius for reliable wear resistance and fracture safety in medium‑steel turning; the ISO compatibility and rhombic geometry support fast integration into standard tool systems. Order the insert directly via Metav Werkzeuge or consult our application specialists for selection support. CPMT 080208 T9215 Tungaloy insert for turning The CPMT080208 T9215 is an ISO‑standard rhombic indexable insert designed for external and internal turning in medium‑steel applications, offering a CVD‑coated carbide grade optimised for continuous to slightly interrupted cuts. ISO rhombic insert CPMT 080208 T9215 CVD-coated carbide for medium steel Single-sided chipbreaker for stable chips 11° clearance and 0.8 mm corner radius Higher throughput and longer tool life for medium steels The CVD‑coated carbide of grade T9215 combines elevated wear resistance with increased fracture strength, enabling sustained machining at higher feed rates. In practice, this means fewer indexings and longer intervals between tool changes, which raises net productivity on serial turning tasks. The coating reduces abrasive wear on the cutting edge while the substrate retains toughness; together they deliver consistent component quality and stable dimensional repeatability for medium‑hard steels. Secure clamping and geometry that improves surface finish The rhombic geometry with an 11° clearance angle and an insert angle of 80° provides a favourable cutting orientation for many external and internal turning operations. The 0.8 mm corner radius balances edge strength with surface finish: it resists chipping on interrupted cuts while producing acceptable roughness on roughing passes. The insert’s hole configuration — cylindrical hole with a single‑side countersink (40°–60°) — supports reliable seating and torque transmission in compatible holders, reducing the risk of movement and vibration that can impair surface quality. Straightforward system integration and process security Integration into a turning cell is straightforward: the ISO insert is used with a matching external holder or boring bar, plus the appropriate shim/clamp set and replacement screws. The single‑sided chipbreaker is optimised for medium‑steel chips and promotes controlled chip flow, reducing entanglement and improving swarf disposal. With a 2.38 mm thickness and standard 08 size, the insert fits many ISO tool families; selecting the correct chipbreaker style and the T9215 grade ensures stable cutting forces and reproducible tool life in both continuous and mildly interrupted cutting conditions. Contact Metav Werkzeuge for availability and tailored application advice on the Tungaloy CPMT080208 T9215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773978 SKU: 6773978-Tungaloy Manufacturer SKU: TUN6773978 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Grade/coating: T9215 (CVD‑coated) Facts Corner radius: 0.8 mm Clearance angle: 11° Insert thickness: 2.38 mm Insert size: 08 Insert angle: 80° Clamp countersink angle: 40°–60° Special features Rhombic insert form Single-sided chipbreaker Cylindrical hole with single-sided countersink ISO standard for turning inserts Suitable for external and internal turning Designed for continuous to slightly interrupted cuts System components: ISO insert, matching holder/boring bar, shim/clamp set and replacement screws FAQ What materials is this insert best suited for? The CPMT080208 T9215 insert is specifically aimed at medium‑steel machining; the T9215 CVD‑coated carbide provides wear resistance and toughness for productive turning of these materials. Can this insert be used for interrupted cuts? Yes, the T9215 grade and the insert’s geometry are suitable for continuous to slightly interrupted cuts; the 0.8 mm corner radius improves resistance to edge chipping under light interruptions. Which holders are compatible with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; use holders that accept ISO rhombic CPMT 080208 inserts and secure the insert using the appropriate shim/clamp set and screws. How does the chipbreaker affect machining performance? The single‑sided chipbreaker on this insert promotes stable chip formation for medium‑steel turning, aiding chip control and reducing swarf issues while supporting consistent cutting forces. What system parts should be considered when specifying the insert? Specify the matching external holder or boring bar, the correct shim/clamp set and replacement screws; ensure the holder accommodates the insert’s cylindrical hole with countersink and the 2.38 mm thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T9215 and a stable rhombic geometry for reliable wear resistance and sustained productivity in medium steel turning; order genuine Tungaloy inserts via Metav Werkzeuge or consult our specialists for grade and chipbreaker selection. CPMT 080208 T9215 ISO turning insert by Tungaloy A CPMT080208 T9215 rhombic turning insert designed for efficient external and internal turning of medium steels. CPMT 080208 rhombic ISO insert CVD-coated grade T9215 for steel 11° clearance for stable cutting Cylindrical hole with 40°–60° countersink High productivity through a wear-resistant grade The T9215 grade is a CVD-coated carbide developed for the demands of medium steel machining. Its coating and substrate combination provide increased wear resistance while maintaining fracture toughness, which translates into fewer indexings and longer uninterrupted cycles. For operations that require high material removal rates or sustained runs with light interruptions, this specification supports constant performance and helps to reduce overall cycle times through reliable edge life. Geometry engineered for stability and precise engagement The CPMT080208 geometry (rhombic shape with an included angle of 80°) offers secure support in the pocket and predictable cutting engagement. The 11° clearance and 0.8 mm corner radius deliver a balance between edge strength and surface finish, while the 2.38 mm thickness contributes to stable clamping under moderate forces. The insert features a cylindrical hole with a single-side countersink (40°–60°) to match common ISO clamping systems; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening and size. System advantages and application guidance Equipped with a single-sided chipbreaker, this insert is suitable for a range of turning tasks where chip control and surface consistency matter. The combination of grade and chipbreaker allows adaptable use from light finishing cuts to productive roughing passes in medium steels. The system approach—insert plus appropriate outer holder, shim/clamping set and fastening screws—ensures repeatable clamping and minimal set-up time, supporting efficient changeovers and predictable tool-life planning. Contact Metav Werkzeuge today for tailored recommendations on genuine Tungaloy CPMT080208 T9215 inserts and to discuss the ideal chipbreaker and holder combination for specific turning tasks Technical data Article number: 6774037 Manufacturer SKU: TUN6774037 Model series: ISO turning inserts Label: CPMT080208 T9215 Tungaloy insert Core data Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Thickness: 2.38 mm Size: 08 Shape: rhombic Hole: cylindrical hole + single-side countersink (40°–60°) Special features Coating: CVD Material: carbide Grade: T9215 Chipbreaker: single-sided Application: turning (external and internal) Compatible system: ISO insert, holder, shim/clamp and screws FAQ What materials is this insert suited for? The Tungaloy CPMT080208 T9215 insert is optimised for medium steels, combining wear resistance and toughness to perform well in continuous and lightly interrupted turning. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the CPMT080208 fits standard ISO pockets designed for rhombic inserts with the same dimensions. How does the T9215 grade affect machining productivity? The T9215 CVD-coated carbide offers an extended edge life under typical steel turning conditions, which reduces downtime for insert changes and supports higher productivity rates. Can this insert be used for internal turning? Yes, the geometry and clearance make the insert suitable for both external and internal turning operations when paired with an appropriate holder. What chip control can be expected with the single-sided chipbreaker? The single-sided chipbreaker promotes controlled chip formation in common turning parameters for medium steel, helping to maintain stable cutting and consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 T9225 Wendeplatten - Tungaloy
Taking advantage of the combination of a CVD-coated carbide grade T9225, a 0.8 mm corner radius and ISO compatibility ensures robust performance for medium to heavy steel turning; order the CPMT080208 insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 080208 T9225 ISO turning insert by Tungaloy — CVD-coated carbide, 0.8 mm radius CPMT 080208 T9225 is an ISO-indexable, rhombic turning insert intended for external and internal turning, designed to handle interrupted cuts and varying engagement conditions in steel machining. ISO-indexable turning insert CPMT080208 CVD-coated carbide grade T9225 Rhombic shape, 11° clearance angle 0.8 mm corner radius for fine detail Cylindrical hole with 40°–60° countersink Reliability where material and process vary The CVD-coated carbide composition in this insert provides a balance between wear resistance and toughness, making it suitable for medium to heavy steel operations. The T9225 grade is engineered as a robust universal solution that tolerates slight interruptions and fluctuating cutting conditions; this reduces the risk of premature edge failure and extends tool life under demanding cycles. As a consequence, cycle times become more predictable and tool-change frequency is reduced, supporting uninterrupted production. Compatibility and secure clamping for machining safety Compatibility of the insert depends on holder geometry, clearance, tolerance class, fastening, size and thickness; the ISO standard of the plate simplifies selection of matching external holders or drill bars. The rhombic profile together with the 11° clearance angle requires a holder that accommodates the plate form and the specified 2.38 mm thickness, while the cylindrical hole with a single-sided countersink (40°–60°) enables secure, repeatable clamping. Correct pairing with an ISO-indexed holder ensures stable cutting engagement and consistent surface results. Performance advantages: chip control and edge integrity The single-sided chipbreaker design focuses on reliable chip formation and evacuation during turning. When combined with the 0.8 mm corner radius, the geometry promotes a better balance between sharpness and edge strength: small radii provide finer detail and improved surface finish, while the T9225 composition adds toughness for interrupted cuts. These characteristics translate into reduced rework and more consistent dimensional accuracy on turned components. Practical use and economical operation For everyday workshop practice the insert supports both external and internal turning tasks and is easy to index for multiple cutting edges, which lowers tooling costs per component. Choosing a universal grade like T9225 minimises inventory complexity while covering a broad range of steels and machining conditions. The overall system—insert, holder, clamping kit and spare screws—allows rapid replacement and stable set-up, so production downtime is reduced and operational efficiency is improved. For application-specific advice on Tungaloy grade T9225 and to confirm holder compatibility, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and supply options. Technical data Article number: 6780999 Manufacturer SKU: TUN6780999 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: T9225 (CVD-coated) Facts Corner radius: 0.8 mm Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 08 Geometry angle: 80° Special features Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker ISO-indexable for external and internal turning Suited for medium to heavy steel machining FAQ Is this insert suitable for interrupted cuts and unstable engagement? The CPMT 080208 T9225 insert is designed as a robust universal grade with enhanced toughness, making it suitable for interrupted cuts and varying engagement conditions in steel turning. Which materials can be machined with this grade? The T9225 grade primarily targets medium to heavy steel applications; its composition and coating afford good wear resistance and toughness for common steel machining tasks. How is the insert clamped to ensure repeatable positioning? Clamping depends on the holder matching the plate form, clearance angle, tolerance class, fastening method, size and thickness; the cylindrical hole with a 40°–60° countersink provides secure and repeatable fixation. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius improves surface finish and dimensional control for turning operations, while the grade’s toughness preserves edge integrity under variable cutting conditions. Can the insert be used for both external and internal turning? Yes, the ISO-indexable rhombic shape and standardised dimensions allow use in appropriately specified holders for both external and internal turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD‑coated carbide, precise ISO compatibility and a versatile 0.8 mm corner radius for reliable medium‑to‑heavy steel turning; order directly via Metav Werkzeuge or consult our specialists for application advice. CPMT080208 T9225 — ISO turning insert for medium‑heavy steel (Tungaloy) CPMT080208 T9225 is an ISO‑standard rhombic indexable insert designed for turning applications, offering a 0.8 mm corner radius and CVD‑coated carbide for robust cutting performance CVD-coated carbide grade T9225 ISO rhombic insert CPMT 080208 0.8 mm corner radius for versatility 11° relief angle for stable cutting Cylindrical hole with 40°–60° countersink Greater reliability in demanding turning operations The CVD‑coated composition of this indexable insert provides a balance between wear resistance and toughness, making it suitable for medium to heavy steel machining where variable cutting conditions occur. The robust universal grade ensures stable cutting edges under intermittent engagement, reducing the risk of unexpected breakage. By choosing a CVD layer paired with a hardened substrate, the tool delivers improved thermal resistance and consistent tool life, which translates into fewer tool changes and more predictable production cycles. Secure seating and ISO compatibility for simple tool selection Manufactured to ISO norms, the rhombic plate shape and standardised hole geometry simplify matching to holders. The 11° relief angle and a plate thickness of 2.38 mm enable reliable clamping and correct rake/clearance relationships in common holders; the cylindrical hole with single‑sided countersink (40°–60°) ensures stable torque transmission when fastened. For those less familiar with cutting‑tool terminology: the insert form, clearance angle and tolerance class determine whether an insert fits a particular external holder or boring bar — selecting matching specifications avoids poor seating and chatter. Shop‑floor benefits that improve process efficiency With a 0.8 mm corner radius, the insert offers a compromise between edge strength and profile fidelity, suitable for general turning and finishing passes where moderate feed rates and surface quality matter. The one‑sided chipbreaker allows controlled chip formation when paired with the appropriate cutting parameters and workpiece material, reducing rework and swarf issues. These characteristics support a rational production argument: fewer interruptions, predictable cycle times and lower total machining cost per part. Typical applications and practical set‑up advice Designed for external and internal turning, this insert performs particularly well in stable set‑ups and semi‑stable conditions where occasional interruptions or variable engagement occur. Select the chipbreaker and grade to match the workpiece and the process stability: for long, steady cuts choose a chipformer suited to continuous chips; for interrupted or unstable cuts, favour the tougher grade and reduced cutting depths. Workpiece materials commonly addressed with this grade include a broad range of steels where a universal, robust solution is preferred. For application guidance on the Tungaloy CPMT080208 T9225 insert and to confirm stock with Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 for swift, production‑oriented advice Technical data Article number: 6781089 Manufacturer SKU: TUN6781089 Insert designation: CPMT080208 Manufacturer article number: 6781089 Brand: Tungaloy Facts Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 11° Plate size: 08 Insert angle: 80° Special features CVD-coated carbide One-sided chipbreaker ISO-standard turning insert Rhombic plate form With hole and single-sided countersink (40°–60°) Suitable for external and internal turning Robust universal grade for medium‑to‑heavy steel machining FAQ What materials is this insert best suited for? This insert is designed as a robust universal grade for medium to heavy steel machining; the CVD‑coated carbide composition favours steel applications with varying cutting conditions. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius provides a balance between edge strength and surface finish, making the insert suitable for general turning and moderate finishing passes where both durability and acceptable surface quality are required. Can this rhombic insert be used in internal turning holders? Yes. The rhombic plate form and ISO dimensions make it compatible with many internal turning holders provided the holder matches the insert form, clearance angle and tolerance class. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with a single‑sided countersink (40°–60°) secures the insert in the clamp, ensuring positive location and torque transmission; this improves seating stability and reduces the chance of insert movement under load. Which chipbreaker should be selected with this grade? Selection depends on workpiece material and cut stability; pair this universal grade with a chipformer suited to the desired chip shape — more open chipbreakers for continuous cuts and tougher, more robust profiles for interrupted machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 080208 T9225 Wendeplatten - Tungaloy
Benefit from the robust combination of CVD‑coated T9225 carbide and ISO CPMT080208 geometry for reliable medium‑to‑heavy steel turning; the 0.8 mm corner radius and cylindrical hole with a single‑sided countersink ensure secure clamping and consistent results. Order original Tungaloy inserts directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. CPMT080208 T9225 Turning insert (ISO) by Tungaloy — CVD‑coated carbide, 80° rhombic form A CPMT080208 T9225 insert designed for ISO‑standard external and internal turning, optimised for medium‑to‑heavy steel machining and interrupted cuts. CVD‑coated carbide grade T9225 for robustness ISO CPMT080208 geometry, 80° rhombic form 0.8 mm corner radius for versatile turning Cylindrical hole with single‑side 40°–60° countersink High productivity through material and coating The CVD‑coated T9225 grade combines toughness and wear resistance to cope with variable engagement conditions typical in medium‑to‑heavy turning of steel. The coating reduces flank wear and improves tool life under thermal and mechanical load, which translates into more consistent cycle times and fewer insert changes. As a result, production runs can be more predictable and machining costs are reduced without compromising surface finish. Precise geometry for dependable clamping and stability Designed as an ISO‑compliant rhombic insert with an 80° main angle, the geometry ensures predictable cutting forces and easy integration into standard holders. The 0.8 mm corner radius balances edge strength and form accuracy, while the 11° relief angle and 2.38 mm thickness contribute to stable seating and resistance to edge chipping. The cylindrical hole with a one‑sided 40°–60° countersink provides secure clamping; compatibility with a holder is determined by form, relief angle, tolerance class, clamping method, size and thickness. Designed for challenging cuts and reliable chip control The combination of cemented carbide substrate and a CVD coating gives improved resistance to abrasive and adhesive wear, making the insert suitable for slightly interrupted cuts or changing engagement. The single‑sided chipbreaker is matched to the grade and geometry to support effective chip formation and evacuation in typical turning operations. This engineering focus lowers the risk of built‑up edge and contributes to reproducible surface quality over long tool lives. System thinking: match insert, holder and process As part of the ISO insert system, the component performs best when used with a compatible outer holder or boring bar, a correct shim/clamp set and the specified fixing screw type. Typical applications include external and internal turning where stability and repeatability are required; the insert is a practical choice when a robust universal grade is needed across varied turning tasks. For specific holder matching or process optimisation, further technical guidance is available from Metav Werkzeuge and application engineers. Contact Metav Werkzeuge for application advice, holder compatibility checks and supply of original Tungaloy CPMT080208 inserts — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6781062 SKU: 6781062-Tungaloy Manufacturer SKU: TUN6781062 Model series: ISO‑Drehwendeschneidplatten Material: Cemented carbide Core dimensions Corner radius: 0.8 mm Thickness: 2.38 mm Relief angle: 11° Main angle: 80° Size designation: 08 Special features Grade/coating: T9225, CVD‑coated cemented carbide Insert form: rhombic Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning of steel FAQ What materials is this insert intended for? The CPMT080208 T9225 insert is optimised for medium‑to‑heavy steel turning; the T9225 grade is selected to provide toughness under variable engagement and slightly interrupted cuts. How does the CPMT080208 geometry affect holder compatibility? Holder compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the CPMT080208’s 11° relief angle and 2.38 mm thickness require matching ISO‑standard holders for secure seating. Is the insert suitable for interrupted cuts? Yes, the T9225 CVD‑coated carbide is designed for robust performance in changing engagement conditions and light interruptions, offering reliable edge stability. What clamping features does the insert offer? The insert includes a cylindrical hole with a one‑sided countersink (40°–60°) to enable firm clamping in compatible ISO‑type holders, improving repeatability and reducing the risk of loosening. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com