DCGT 070204 SH725 Wendeplatten - Tungaloy
Take advantage of a robust combination of SH725 coated carbide and ISO conformity for consistent turning results; the rhombic DCGT070204 geometry with a 0.4 mm corner radius ensures reliable edge life under varying engagement conditions. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. DCGT070204 SH725 ISO turning indexable insert — Tungaloy — coated carbide, 7° clearance DCGT070204 SH725 is an ISO-standard indexable insert designed for external and internal turning, offering a compact rhombic form and a grade optimised for variable cutting conditions ISO rhombic insert, size 07 SH725 coated carbide grade Single-sided chipbreaker for turning 7° clearance and 0.4 mm corner radius Consistent edge performance for variable turning conditions The rhombic ISO-standard geometry delivers a predictable contact area and stable tool life when machining a range of steels and general turning tasks. The SH725 coated carbide grade is formulated to provide improved edge toughness and wear resistance, which reduces the need for frequent index changes and supports continuous production. With a 0.4 mm corner radius and a moderate included angle, the insert balances strength at the cutting edge with the capability to produce the required surface finish, making it suitable for jobs where entry conditions and chip loads vary. The built-in single-sided chipbreaker guides the chip formation to reduce vibration and maintain process stability. Better chip control and surface integrity through tailored geometry A dedicated chip control form on the insert ensures chips are guided away from the cut, lowering the risk of re-cutting and tool edge damage. The combination of coated carbide and the tailored chipbreaker gives a measurable benefit: improved surface integrity and fewer interruptions for chip clearing. The 7° clearance angle helps to reduce rubbing on the flank face, decreasing heat build-up and extending service intervals. For operations where dimensional accuracy and repeatability matter, this geometry reduces scatter in component tolerances and supports a more reliable machining process. System compatibility and straightforward integration into tooling setups The insert is supplied in an ISO indexable format that matches ISO holders and boring bars when form, clearance angle, tolerance class, fixing method, size and thickness align. The plate includes a cylindrical hole with a one-sided countersink (40°–60°) to secure it reliably in most clamping systems, and the 2.38 mm plate thickness gives sufficient support for stable cutting, especially with smaller tools or intermittent engagements. As part of a system approach, the insert works with standard holders, clamping sets and replacement screws to simplify logistics and tool change routines on the shop floor. Practical advantages and recommended use Designed specifically for turning, the indexable plate is best applied where consistent edge stability and versatile performance are required, such as mixed-batch production or setups with variable engagement. The DCGT070204 geometry is particularly helpful when smaller inserts are preferred for access or when working with limited tool overhangs. The grade’s emphasis on toughness makes it appropriate for operations that may otherwise demand more frequent insert changes, supporting uptime and productivity improvements across shifts. For reliable machining with SH725-coated inserts and to discuss holder compatibility, contact Metav Werkzeuge for application advice or order coordination: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6737019 Facts Size: 07 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 55° Special features Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Cutting material: coated carbide (SH725) Intended application: turning Model series: ISO turning indexable inserts Manufacturer SKU: TUN6737019 FAQ What materials is this insert suitable for? The DCGT070204 SH725 Tungaloy indexable insert is a coated carbide grade designed for general turning applications and performs well on a broad range of steels and common engineering materials. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert supports controlled chip formation in turning, reducing the risk of entanglement and improving process stability for the DCGT070204 SH725 insert. Which holders are compatible with this ISO insert? Compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness; the insert is ISO-standard and fits holders and boring bars that conform to those parameters. What is the purpose of the countersunk hole design? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping in standard indexable insert holders and helps maintain repeatable seating and torque settings. Is the corner radius suitable for finishing operations? The 0.4 mm corner radius offers a compromise between edge strength and surface finish; it can deliver good finish while providing robustness for variable engagement conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a resilient SH725 carbide grade and precise geometry for dependable turning results; order the inserts directly via Metav Werkzeuge or consult the advisers for application-specific selection. DCGT070204 SH725 indexable turning insert — rhombic form, 7° clearance, Tungaloy DCGT070204 SH725 is an ISO‑standard indexable insert designed for turning operations where small tools or variable engagement demand a tough, edge‑stable grade. ISO rhombic insert DCGT 07 size Coated carbide grade SH725 0.4 mm corner radius for profiling Cylindrical hole with countersink 40°–60° Consistent cutting performance for production turning The insert delivers stable cutting edges and predictable wear behaviour thanks to the SH725 coated cemented carbide matrix. Its rhombic form and 0.4 mm corner radius suit light profiling and finishing passes, while the single-sided chipbreaker supports efficient chip control during external and internal turning. The result is fewer unexpected interruptions in the production process and improved component repeatability through consistent edge geometry. Designed for reliable clamp fit and repeatability Compatibility with the toolholder is ensured by the ISO designation and the insert’s precise geometry. The DCGT070204 format, standardised thickness and the cylindrical hole with a single-sided countersink (40°–60°) enable secure mounting and simple replacement. This reduces setup time and minimises downtimes caused by incorrect seating. Where holder stability or tool overhang varies, the insert’s dimensions and tolerance class maintain a reproducible clamping interface. Grade and coating advantages explained The SH725 grade is a coated carbide designed for toughness and edge stability, making it well suited to turning when tool size or varying engagement conditions are present. Coating reduces built‑up edge and improves resistance to abrasion, while the substrate supports resistance to chipping. For users unfamiliar with metallurgical terms: a coated cemented carbide combines a hard, wear‑resistant coating with a tough carbide body so the insert tolerates intermittent loads and fluctuating cut depths more reliably than uncoated options. Application guidance and practical benefits For external and internal turning, selecting the correct chipbreaker and grade reduces rework and machining time. The single-sided chipbreaker on this insert assists with short, controllable chips and improves surface finish in semi‑finishing operations. Given the insert’s geometry and 7° clearance, it performs well in applications where moderate feed rates and light to medium cuts are needed, particularly when small‑shank tooling or variable engagement are factors. Contact Metav Werkzeuge for tailored recommendations on Tungaloy SH725 inserts and to arrange procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Manufacturer article number: 6737020 Manufacturer SKU: TUN6737020 SKU: 6737020-Tungaloy Model series: ISO‑indexable turning inserts Material: cemented carbide Core specifications ISO designation: DCGT070204 Size: 07 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included edge angle: 55° Design & special features Rhombic insert form Cylindrical hole with one‑sided countersink (40°–60°) Single‑sided chipbreaker Coated carbide grade SH725 For external and internal turning applications FAQ What holder types are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the DCGT070204 format fits ISO‑compliant turning holders designed for DCGT inserts. Which materials is the SH725 grade suited to machine? The SH725 coated cemented carbide is intended for general turning where toughness and edge stability are required; it performs well across a broad range of steels and mixed cutting conditions. How does the 0.4 mm corner radius affect the cut? A 0.4 mm radius improves edge strength and surface finish for light profiling and reduces corner chipping risk compared with sharper radii. What is the purpose of the cylindrical hole with countersink? The hole with a single‑sided countersink (40°–60°) secures the insert reliably in the pocket and helps centre the insert, enabling fast and repeatable replacement. Can this insert be used for finishing passes? Yes; with its coated substrate and modest corner radius, the insert is suitable for finishing when feeds and depths are chosen appropriately to match the toolholder rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 TH10 Wendeplatten - Tungaloy
Efficient turning performance is achieved by combining the uncoated TH10 carbide grade with the ISO rhombic geometry and a 0.4 mm corner radius for consistent surface quality; compatibility depends on form, relief angle and size, so check holder fitment carefully. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DCGT070204 TH10 — Tungaloy ISO rhombic turning insert, 55° for external and internal turning A DCGT070204 TH10 ISO‑standard indexable insert designed for turning operations on non‑ferrous materials and applications requiring low cutting forces and clean surface finishes ISO rhombic insert DCGT070204, 55° cutting angle Uncoated TH10 carbide for low cutting forces 0.4 mm corner radius for consistent surface finish Cylindrical hole with single‑side countersink for secure clamping Consistent surface quality through sharp, uncoated grade The uncoated TH10 grade offers a deliberately sharp cutting edge that reduces cutting forces and supports cleaner finishes when machining non‑ferrous materials. As an uncoated carbide insert, the geometry and sharp edge minimise built‑up edge formation and are therefore particularly effective where low cutting resistance and fine surface integrity are priorities. This results in predictable tool behaviour and less rework in subsequent operations. ISO conformity and secure seating reduce setup risk Supplied in an ISO configuration, the insert’s compatibility with holders is determined by form, 7° relief angle, tolerance class, fastener type, size and plate thickness. The rhombic geometry at a 55° included angle suits both external and internal turning with stable contact. The cylindrical hole with a single‑side countersink (40°–60°) ensures consistent clamping and repeatable seating, lowering the likelihood of false starts or misalignment in series production. Practical workshop advantages that boost productivity The 0.4 mm corner radius delivers a balance between strength at the cutting edge and surface finish quality; paired with the single‑sided chipbreaker, chip control is simplified for many turning tasks. The insert’s 2.38 mm thickness and size 07 format are standard dimensions that enable use in a wide range of ISO holders and tool systems, which helps to maintain process continuity and reduces tool change complexity on multi‑machine shop floors. For reliable turning results with Tungaloy’s TH10 grade, contact Metav Werkzeuge for fitment guidance and rapid supply: info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6802800-Tungaloy Manufacturer article number: 6802800 SKU: TUN6802800 Manufacturer: Tungaloy Facts Cutting angle: 55° Relief angle: 7° Corner radius: 0.4 mm Plate thickness: 2.38 mm Size designation: 07 Special features Material: carbide (cemented carbide) Grade: TH10 (uncoated) Plate shape: rhombic Hole: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: turning (external and internal) ISO‑compliant indexable insert FAQ What materials is this insert intended for? The DCGT070204 TH10 insert from Tungaloy is intended primarily for non‑ferrous materials and situations where an uncoated, sharp cutting edge supports low cutting forces and clean surfaces. Is the insert suitable for internal and external turning? Yes, the rhombic ISO geometry with a 55° cutting angle makes the insert suitable for both external and internal turning applications. How does the TH10 grade affect cutting performance? The TH10 uncoated carbide grade provides a sharp edge that reduces cutting forces and helps achieve a better surface finish when machining compatible workpiece materials. What clamping features should be checked for holder compatibility? Compatibility depends on the insert form, relief angle, tolerance class, fastener type, size and thickness; the DCGT070204 has a cylindrical hole with a single‑side countersink for secure seating. Can the insert be used in standard ISO holders? Yes, the insert conforms to ISO indexable insert standards and fits holders that accept DCGT‑style inserts in the 07 size and 2.38 mm thickness range. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070204 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated TH10 grade, precise geometry and ISO compatibility for consistent turning results; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. DCGT070204 TH10 Tungaloy indexable turning insert — ISO rhombic, 55° lead angle The DCGT070204 TH10 insert is an ISO-standard rhombic turning insert designed for general turning operations where low cutting forces and clean surface finishes are required. ISO-standard rhombic insert, 55° lead angle Uncoated carbide TH10 for low cutting forces 0.4 mm corner radius for controlled finishing Cylindrical hole with single-side countersink (40°–60°) Efficient cutting with low force and clean finishes The combination of the uncoated TH10 carbide and the insert's geometry yields a measurable reduction in cutting forces during turning. This results in lower power draw and less tool-induced vibration, which supports stable machining and helps to extend holder and tool life. The 0.4 mm corner radius is optimised for finishing passes, improving surface quality while maintaining reliable edge strength. For operations in non-ferrous materials or processes that favour a sharp cutting edge, this design offers a practical balance between economy and performance. Predictable chip control and consistent tool life A single-sided chipbreaker and defined relief geometry deliver predictable chip formation, especially during external and internal turning when consistent chip evacuation is critical. The uncoated carbide substrate provides a clean cutting edge that reduces built-up edge tendencies on softer metals, enabling repeatable results across batches. By selecting the appropriate chipbreaker and grade, users can achieve improved process reliability and fewer interrupted cycles, which contributes to higher throughput and lower rework rates. Designed for secure mounting and ISO compatibility Compatibility with the toolholder is determined by multiple parameters such as form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure secure seating and repeatable clamping. The ISO designation simplifies holder selection and reduces setup errors in mixed tooling environments, supporting efficient tool changeovers and inventory management in production settings. Application range and material suitability This insert is particularly suited to turning applications where low cutting forces and a sharp edge are beneficial, such as machining non-ferrous alloys and mixed-material batches. The TH10 grade is an uncoated universal sort designed to support clean surface finishes and easy chip flow. Typical system assembly includes the ISO insert, a matching outside holder or boring bar, a shim/clamp set and replacement clamping screws; this modular setup enables flexible adaptation to different workpiece geometries and process stability requirements. For technical advice or to request an order for Tungaloy TH10 inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com | +49 2822 7131930 — our consultants will advise on optimal holder selection and application parameters Technical Data Article number: 6802804 Manufacturer SKU: TUN6802804 SKU: 6802804-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: TH10 (uncoated) Numbers / Core technical data Insert designation: DCGT070204 Insert size: 07 Insert shape: rhombic, 55° lead angle Corner radius: 0.4 mm Relief angle: 7° Thickness: 2.38 mm Designs / Special features Cylindrical hole with single-side countersink (40°–60°) Single-sided chipbreaker ISO-standard geometry for holder compatibility Suitable for external and internal turning Sharp uncoated cutting edge for low cutting forces FAQ What workpieces is this insert best suited for? The DCGT070204 TH10 insert from Tungaloy is best for turning non-ferrous metals and situations where a sharp, uncoated edge reduces cutting forces and improves surface finish. How does the insert mount in a holder? Mounting uses the cylindrical hole with a single-side countersink; correct seating is achieved when the holder matches the ISO geometry, relief angle and thickness of the insert. Can this insert be used for finishing passes? Yes, the 0.4 mm corner radius and the TH10 grade provide controlled finishing performance, delivering improved surface quality in finishing operations. What components are required for a complete system setup? A complete turning setup typically comprises the ISO insert, a compatible outside holder or boring bar, a shim/clamp set and replacement screws to secure the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 070204 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of reliable fit, low cutting forces and a clean surface finish for efficient turning operations; order directly via Metav Werkzeuge or request tailored advice from our consultants. DCGT070204 TH10 Tungaloy indexable insert — ISO turning insert with uncoated carbide grade TH10 DCGT070204 TH10 Tungaloy indexable insert is an ISO‑standard turning insert designed for external and internal turning applications, favouring non‑ferrous materials and situations that require low cutting forces and fine surface quality. ISO-compatible turning insert Uncoated carbide grade TH10 Rhombic 07 form, 55° included angle Cylindrical hole with one-sided countersink Consistent low cutting forces and improved surface quality The uncoated carbide TH10 grade delivers a sharp, low‑friction cutting edge that is particularly suitable for machining aluminium, copper and brass alloys where reduced force and a clean finish matter. As an indexable insert, the geometry minimises built‑up edge and helps maintain dimensional accuracy during interrupted cuts. The single‑sided chipbreaker assists reliable chip control without coating layers that might blunt the edge; this makes the grade an economical choice for high‑volume production where repeatable surface quality and low cutting forces translate into fewer reworks and higher throughput. Accurate seating and rapid tool exchange for stable processes The insert conforms to ISO specifications so compatibility with holders depends on form, relief angle, tolerance class, clamping method, size and thickness. The rhombic 07 form and the cylindrical hole with single‑side countersink (40°–60°) ensure secure clamping in compatible external holders or boring bars. A 2.38 mm plate thickness and standardised dimensions facilitate straightforward replacement and minimal set‑up time, supporting stable cutting conditions and fast tool changes that reduce machine downtime and maintain production flow. Geometry choices that balance edge strength and finish A 0.4 mm corner radius combined with a 55° included angle provides a compromise between edge robustness and fine surface generation: the smaller radius favours better finishes and lower cutting forces, while the insert geometry preserves sufficient edge strength for medium stability cutting. The 7° relief angle reduces rubbing on the flank, lowering heat generation and extending usable edge life in appropriate applications. Selecting the correct chipbreaker and matching the grade to material and process stability will optimise component quality and tool life. System approach for reliable turning results The working system comprises the ISO insert plus a suitable external holder or boring bar, a proper seat or clamping set, and the correct replacement screws. Correct pairing of the insert geometry with the holder and clamping hardware ensures repeatable seating and consistent cutting conditions. For production environments seeking dependable interchangeability, the standardised format of this insert simplifies inventory management and reduces the variety of spare parts required on the shop floor. Contact Metav Werkzeuge for application advice or to request compatible holders and clamping sets for the DCGT070204 TH10 indexable insert Technical data Article number: 6802806 Manufacturer SKU: TUN6802806 Sales SKU: 6802806-Tungaloy Manufacturer: Tungaloy Numbers / Core technical data Corner radius: 0.4 mm Relief angle: 7° Included angle: 55° Plate thickness: 2.38 mm Insert size: 07 ISO code: 070204 Special features / Designs Grade: TH10 (uncoated carbide) Material: Hartmetall (carbide) Shape: rhombic Hole: with cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: Drehen (turning) System build: ISO insert, holder or boring bar, seat/clamping set, spare screws FAQ What materials is this insert best suited for? The DCGT070204 TH10 Tungaloy indexable insert (SKU 6802806-Tungaloy) is optimised for non‑ferrous materials such as aluminium, copper and brass, where its uncoated TH10 grade and sharp edge produce low cutting forces and good surface finish. How does the insert mount into a holder? Mounting requires a compatible ISO‑type holder matched to the insert form, relief angle, tolerance and thickness; the DCGT070204 uses a cylindrical hole with a one‑sided countersink to provide secure clamping and repeatable seating. What effect does the 0.4 mm corner radius have on machining? A 0.4 mm corner radius balances edge strength and surface quality: it supports improved finishes and lower cutting forces while maintaining sufficient robustness for typical turning tasks when stability is adequate. Is the TH10 grade coated or uncoated, and why does that matter? TH10 is an uncoated carbide grade; the lack of coating keeps the cutting edge very sharp, which reduces cutting forces and helps achieve cleaner surfaces, particularly useful for non‑ferrous materials and low‑force applications. Which parameters should be considered when selecting this insert for production? Key parameters include the insert geometry (rhombic 07, 55°), corner radius (0.4 mm), relief angle (7°), plate thickness (2.38 mm) and the chipbreaker style; matching these to material, holder stability and cutting conditions ensures consistent performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 070204 TH10 Wendeplatten - Tungaloy
Reliable ISO conformity, a sharp uncoated TH10 carbide grade and a secure through‑hole clamping deliver low cutting forces, clean surfaces and reproducible results in daily turning operations; order via Metav Werkzeuge or consult their technical advisers for process guidance. DCGT070204 TH10 — ISO turning insert for external and internal turning by Tungaloy The DCGT070204 TH10 is an ISO‑standard rhombic indexable insert designed for general turning of non‑ferrous materials and applications demanding low cutting forces. ISO rhombic insert, 55° cutting angle Uncoated carbide grade TH10 for non‑ferrous Single‑sided chipbreaker for consistent chips Through‑hole mounting, cylindrical + countersink Predictable fit and reliable seating for production workflows The insert is manufactured to ISO dimensions so compatibility with holders is determined by form, clearance angle, tolerance class, fastening and plate thickness — factors that support process repeatability. The measured 55° cutting angle and 7° clearance ensure a consistent cutting geometry that reduces setup variability and simplifies tool management. Where spare parts and quick index changes are routine, the standardised geometry of this indexable plate allows predictable seating and reduced machine downtime. Low cutting forces and cleaner finishes on non‑ferrous materials Chosen for its TH10 uncoated carbide composition, the insert promotes a sharp cutting edge that lowers cutting forces in aluminium, brass and other soft alloys. That sharper, uncoated edge helps avoid built‑up edge and supports a cleaner surface finish on workpieces, which means fewer secondary operations. In processes where heat and adhesion can compromise results, the uncoated grade offers effective material removal with a reduced tendency to smear, contributing to consistent part quality and effective cycle times. Secure clamping and chip control for everyday turning The insert’s rhombic form and single‑sided chipbreaker combine to guide chips predictably during both external and internal turning. A through‑hole design with a cylindrical bore and a one‑sided countersink (40°–60°) provides a secure mechanical clamp, while the 0.4 mm corner radius offers a balance between strength and surface quality for finishing passes. With a plate thickness of 2.38 mm and standard ISO sizing, the component is suitable for production environments that require robust clamping and easy indexability. Choose Tungaloy’s DCGT070204 TH10 for efficient non‑ferrous turning and contact Metav Werkzeuge for tailored application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6802809 Manufacturer SKU: TUN6802809 Manufacturer: Tungaloy Model series: ISO turning inserts Material: carbide Core data Cutting angle: 55° Clearance angle: 7° Corner radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 07 Special features Uncoated carbide grade TH10 Single-sided chipbreaker Rhombic plate form (DCGT) Mounting: through hole, cylindrical + one-sided countersink (40°–60°) Typical use: external and internal turning FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is optimised for non‑ferrous materials such as aluminium and brass; the DCGT070204 insert supports applications where low cutting forces and clean surfaces are required. How does the insert fit existing holders? Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness; the ISO dimensions of this DCGT plate ensure interchangeability with matching ISO‑type holders. Is the cutting edge coated? No, this insert is an uncoated carbide grade TH10, chosen to provide a sharp edge and reduced cutting forces for non‑ferrous turning. What chip control can be expected? The single‑sided chipbreaker on the rhombic plate offers controlled, repeatable chip formation suitable for stable turning operations. What is the manufacturer article number and SKU? The manufacturer article number is 6802809 and the manufacturer SKU is TUN6802809 for the DCGT070204 TH10 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 J740 Wendeplatten - Tungaloy
Take advantage of the combination of wear resistance, stable cutting edge and precise holder compatibility to maintain process stability and reduce changeover time. Order the DCGT 11T300 J740 insert directly via Metav Werkzeuge or ask the consultants for selection support. DCGT 11T300 J740 ISO turning insert for turning applications — Tungaloy DCGT 11T300 J740 is an ISO‑standard indexable insert designed for precision turning, suitable for both external and internal operations where consistent chip control and edge stability are required. ISO‑standard rhombic 55° insert Tungaloy J740 grade for wear resistance One‑sided chipbreaker for chip control 7° clearance; 3.97 mm thickness Reliable chip control to keep production running The insert’s single‑sided chipbreaker is engineered to manage swarf reliably during continuous turning, which reduces the risk of interruptions and tool-induced surface defects. As a result, process planners benefit from more predictable cycle times and fewer machine stops. The combination of the chipbreaker and the Tungaloy J740 carbide grade delivers a balance between wear resistance and enough toughness to handle variations in feed and depth of cut without premature chipping. Geometry that supports repeatable tool life The 55° rhombic geometry plus a 7° clearance angle and a 3.97 mm thickness provide dimensional stability and repeatable cutting behaviour. These geometric choices contribute to a secure clamping interface and even load distribution across the cutting edge, which translates into longer service intervals and reduced tooling consumption. For operations where surface finish and dimensional consistency matter, the geometry helps maintain machining tolerances over extended runs. Clear compatibility guidance for straightforward integration Compatibility with toolholders depends on form, clearance, tolerance class, fastening, size and thickness; the insert is delivered with a cylindrical hole and a one‑sided countersink (40°–60°) for standard clamping systems. This clarity in interface design simplifies selection for engineers: matching the insert to a holder is a matter of confirming those parameters rather than guesswork, which speeds up procurement and reduces the need for trial fittings. Industrial performance backed by grade and substrate Made from carbide and specified with the J740 grade, the insert is intended for productive turning across a broad range of materials when paired with the correct chipbreaker and cutting parameters. The carbide substrate provides thermal stability and wear resistance, while the grade specifics aim to deliver stable edge retention. For machining engineers, this means fewer unexpected tool changes and a more economical machining process overall. For machining applications that demand consistent edge life, consult Metav Werkzeuge for availability and guidance on selecting the correct insert geometry and holder combination for your turning tasks. Technical data Article number: 6802814 Manufacturer SKU: TUN6802814 SKU: 6802814-Tungaloy Model series: ISO turning indexable inserts Designation: DCGT11T300 J740 Core specifications Insert size: 11 Thickness: 3.97 mm Clearance angle: 7° Geometry angle: 55° Hole style: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: one‑sided Materials and special features Material: carbide Grade: Tungaloy J740 Shape: rhombic Standard: ISO‑conforming insert Intended application: turning Compatibility notes: depends on holder form, clearance, tolerance, fastening, size and thickness FAQ What machining tasks is this insert best suited for? The DCGT 11T300 J740 insert is designed for turning—both external and internal—and performs well where controlled chip formation and edge stability are priorities. How does the J740 grade affect performance? The Tungaloy J740 grade provides a balance of wear resistance and toughness, helping to maintain a stable cutting edge during extended production runs. Can this insert be used in any ISO holder? Compatibility requires matching holder form, clearance, tolerance class, fastening, size and thickness; verify these parameters against the insert’s dimensions before assembly. What are the key dimensions to check when choosing a holder? Confirm the insert size (11), thickness (3.97 mm), clearance angle (7°) and the hole/countersink arrangement to ensure secure clamping and correct seating. Is the insert suitable for finishing and roughing operations? With the appropriate chipbreaker and cutting parameters, the insert can be applied to both finishing and roughing; select the chipformer and grade that match the material and stability of the setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 J740 Wendeplatten - Tungaloy
Combining the J740 wear resistance with a rhombic DCGT form and 7° relief, this insert provides stable cutting for external and internal turning and reduces rework. Order the DCGT11T300 directly via Metav Werkzeuge or consult our specialists for optimisation of cutting data and tool selection. DCGT 11T300 J740 – DCGT turning insert by Tungaloy The DCGT11T300 J740 is an ISO rhombic turning insert designed for external and internal turning applications, offering a balanced combination of wear resistance and edge stability. ISO rhombic insert with 55° included angle J740 Tungaloy grade for wear resistance Cylindrical hole with single-side countersink 7° relief for reliable chip control Optimised cutting performance for stable production The combination of the ISO geometry and the J740 grade ensures predictable performance during turning operations. The cemented carbide substrate contributes to consistent edge life, while the grade’s balance of wear resistance and toughness reduces the frequency of insert changes. For operations that require steady productivity, this indexable insert supports lower downtime and more predictable tool-change intervals, which contributes directly to process efficiency and a reduced total cost of machining. Secure clamping and straightforward compatibility Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation eliminates guesswork in selection. The rhombic 55° geometry and the cylindrical hole with single-side countersink (40°–60°) ensure a precise seat and secure clamping in matched holders, improving repeatability and reducing chatter. Clear ISO conformity simplifies tool management across machines and operators, enabling quicker set-ups and consistent part quality. Geometry and grade that suit versatile turning tasks The insert’s 7° relief and 55° included angle make it well-suited to a wide range of external and internal turning operations where a stable cutting edge is required. The one-sided chipbreaker supports controlled chip formation and evacuation under varying cutting conditions; this helps maintain surface finish while protecting the cutting edge. Selecting the correct chipbreaker and grade for the workpiece and machining stability yields measurable gains in surface consistency and tool life. Practical guidance for process selection and optimisation Select the chipbreaker and grade in line with the workpiece material, depth of cut and machine rigidity to extract the best performance from this indexable insert. Regularly monitoring cutting conditions and adjusting speeds and feeds in small increments will exploit the J740 grade’s balance between toughness and wear resistance, delivering conservative but reliable machining outcomes. For complex or high-volume production, integrating this insert into a tool system with matched holders and clamping components provides a predictable, repeatable solution. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy DCGT11T300 J740 insert into production; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802811 Manufacturer SKU: TUN6802811 Marketplace SKU: 6802811-Tungaloy Model series: ISO turning indexable inserts Designation: DCGT11T300 J740 Application: Turning Data Insert size: 11 mm Plate thickness: 3.97 mm Included angle: 55° Relief angle: 7° Countersink range: 40°–60° Special features Shape: rhombic Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Grade: J740 (Tungaloy) Material: cemented carbide ISO designation: 11T300 FAQ What cutting tasks is this insert intended for? The DCGT11T300 J740 insert by Tungaloy is intended for external and internal turning, offering a balance of wear resistance and edge stability for general turning operations. How does the J740 grade influence tool life? The J740 grade used in the DCGT11T300 combines wear resistance with toughness to provide consistent edge life under varied cutting conditions, reducing unplanned tool changes. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO dimensions and fits holders that match its form, relief angle, tolerance, fastening method, size and thickness. Which chipbreaker should be used for heavy cuts? For heavier depths of cut, choose a chipbreaker and a machining strategy that prioritises edge stability and rigidity; the DCGT11T300’s one-sided chipbreaker is designed to support controlled chip formation in demanding operations. Can this insert be re-sharpened or reconditioned? Indexable inserts such as the DCGT11T300 are typically replaced rather than re-sharpened; the cemented carbide substrate and grade are designed for reliable single-use performance until wear criteria are reached. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 NS9530 Wendeplatten - Tungaloy
Take advantage of the ISO-standard design, the NS9530 uncoated cermet for superior surface finish, and the precise 7° clearance angle to maintain steady production and consistent part quality. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCGT11T300 NS9530 – ISO turning insert for finishing, Tungaloy The DCGT11T300 NS9530 is an ISO-standard rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces. ISO-standard rhombic insert, 55° geometry Uncoated cermet NS9530 for fine finishing 7° clearance angle for low cutting forces Central hole with 40°–60° countersink Consistent finishing performance with low cutting forces The insert is specified as an uncoated cermet (NS9530) grade engineered for fine finishing of steel. Its sharp edge geometry and material composition reduce cutting forces and support continuous cuts and small depth-of-cut applications, resulting in a high surface finish and fewer secondary grinding or polishing steps. This translates into shorter cycle times and improved first-pass quality for turned components while maintaining process stability. ISO conformity and secure clamping for repeatable results Built to the ISO turning insert family, the rhombic 55° geometry and standard hole form ensure compatibility when matched with appropriate external holders or boring bars. The insert thickness of 3.97 mm and the 7° clearance angle deliver predictable engagement and reduced vibration when clamped correctly. The central cylindrical hole with a one-sided countersink (40°–60°) provides reliable axial and radial locating for repeatable seating and torque transmission in standard clamping systems. Operational benefits: selection ease and productive machining As a finishing-grade cermet, this insert offers an attractive balance of surface quality and tool life for continuous finishing passes on steel; a one-sided chipbreaker suits steady chip control at small feeds. Selection of the chipbreaker and grade should match component material, cut stability and machining strategy to achieve cost-effective productivity. For guidance on chipbreaker choice or integrating the insert into an existing tool system, Metav Werkzeuge provides application-focused advice to optimise cutting data and holder selection. For precision finishing choose the Tungaloy DCGT11T300 NS9530 insert from Metav Werkzeuge; for tailored advice on holder compatibility, chipbreaker selection or cutting data, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6967221 Manufacturer SKU: TUN6967221 Model series: ISO turning inserts Application: Turning Grade: NS9530 (uncoated cermet) Material: cemented carbide Facts Size: 11 Thickness: 3.97 mm Clearance angle: 7° Geometry angle: 55° Manufacturer part number: 6967221 SKU: 6967221-Tungaloy Special features Rhombic plate form Central cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard insert compatible with external holders or boring bars Designed for finishing steel with continuous cuts FAQ What materials is this insert suited for? The DCGT11T300 NS9530 insert is formulated for finishing operations on steel; the NS9530 uncoated cermet grade gives a sharp edge and strong surface finish for continuous, light-cut applications. How is the insert mounted in a toolholder? The insert uses a central cylindrical hole with a one-sided countersink (40°–60°) for axial locating and clamping; pairing the insert with a compatible external holder or boring bar ensures secure seating and repeatable positioning. What advantages does an uncoated cermet grade offer? An uncoated cermet like NS9530 provides a fine, durable cutting edge that reduces cutting forces and improves surface finish during finishing passes, often reducing the need for downstream finishing operations. Which chipbreaker should be chosen for best results? A chipbreaker matched to steady, continuous cuts and small depths of cut is recommended; the one-sided chipbreaker on this insert supports controlled chip formation in finishing scenarios. Is this insert ISO-standard and interchangeable? Yes, the insert conforms to ISO turning insert specifications and will be compatible with holders sized and rated for the DCGT11T300 form and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 NS9530 Wendeplatten - Tungaloy
Taking advantage of the combination of an ISO‑standard rhombic geometry, a sharp uncoated cermet NS9530 grade and precise mounting features ensures consistently low cutting forces and superior surface finish during turning operations; order the insert directly via Metav Werkzeuge or request application advice from the consultants. DCGT11T300 NS9530 DCGT turning insert, rhombic 55° geometry — Tungaloy DCGT11T300 NS9530 is an ISO rhombic turning insert designed for fine finishing of steel, offering a sharp cutting edge and stable performance in continuous cuts. ISO rhombic 55° geometry Uncoated cermet NS9530 grade Low cutting forces and fine surface finish Cylindrical hole with one‑sided countersink Achieve consistent fine finishing with reduced cutting forces The rhombic 55° geometry combined with the uncoated cermet NS9530 composition is engineered to deliver a sharp cutting edge and low cutting forces, which directly reduces vibration and improves process stability. For customers machining steel in continuous‑cut scenarios or with small depths of cut, this design provides a clear advantage: smoother feeds and a noticeable improvement in surface quality. The result is fewer rework cycles and more predictable outcomes in serial production, supporting higher productivity and tighter tolerances. Simple compatibility checks and secure clamping for reliable results Compatibility with a holder depends on form, clearance angle, tolerance class, clamping method, size and thickness; the ISO standardisation of the insert simplifies selection. The insert’s 7° clearance and 3.97 mm thickness are critical dimensions for matching an appropriate external holder or boring bar. The cylindrical hole with a one‑sided countersink (40°–60°) ensures reliable clamping and repeatable positioning, which contributes to consistent cutting edge orientation and extended inter‑changeability in production fixtures. Application guidance: where this insert performs best Designed as a finishing grade for steel, the insert is particularly suitable for operations that prioritise surface integrity and dimensional accuracy over heavy material removal. The single‑sided chipbreaker steers chips effectively in continuous cuts, reducing the risk of built‑up edge and facilitating chip evacuation. For machinists seeking a balance between excellent surface finish and predictable tool life in fine turning, this insert provides a cost‑efficient solution while maintaining process stability. If there is uncertainty about suitability for a specific component or process parameters, further technical data and cutting recommendations are available; contact Metav Werkzeuge for application advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Contact Metav Werkzeuge for tailored application advice and to secure supply of the Tungaloy DCGT11T300 NS9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967192 Manufacturer SKU: TUN6967192 SKU: 6967192-Tungaloy Model series: ISO turning inserts Designation: DCGT11T300 NS9530 Tungaloy insert Facts Geometry angle: 55° Clearance (relief) angle: 7° Thickness: 3.97 mm Size: 11 Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Special features Grade: NS9530 Cutting material: uncoated cermet Plate form: rhombic Chipbreaker: one‑sided Typical application: external and internal turning; finishing of steel Compatibility: determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? This Tungaloy DCGT11T300 NS9530 turning insert is formulated as a finishing grade for steel and performs particularly well in continuous cuts and small depths of cut. How does the NS9530 grade affect surface finish? The NS9530 uncoated cermet offers a sharp cutting edge and stable cutting action, which contributes to an improved surface finish and reduced need for secondary finishing. Which holders are compatible with the insert? Compatibility is governed by ISO form, clearance angle, tolerance class, clamping style, size and thickness; the insert’s 7° clearance and hole/countersink arrangement facilitate secure clamping in appropriately matched ISO external holders or boring bars. Is the insert suitable for internal turning as well as external turning? Yes, the geometry and chipbreaker design make the insert suitable for both external and internal turning where finishing and surface integrity are required. What does the one‑sided chipbreaker provide? The one‑sided chipbreaker controls chip formation during continuous cuts, aiding chip evacuation and reducing the risk of built‑up edge, which helps maintain surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T300 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of edge-stable SH7025 grade, ISO compatibility and compact rhombic geometry for consistent turning results and reliable tool life. Order original Tungaloy inserts directly via Metav Werkzeuge or consult the team for application advice. DCGT11T300 SH7025 Tungaloy — indexable insert for turning, coated carbide The DCGT11T300 SH7025 is an ISO-series, rhombic turning insert designed for external and internal turning applications where edge stability and adaptability to varying engagement conditions are required. Coated carbide grade SH7025 Rhombic 55° geometry 7° clearance angle Cylindrical hole with 40°–60° countersink Stable cutting performance for small tools and variable cuts The insert’s SH7025 coated carbide composition combines toughness with reliable edge stability, which supports predictable cutting forces and reduces the risk of premature edge chipping. In practice, this means more consistent cycle times and fewer unexpected tool changes when machining interrupted cuts or variable engagement conditions. The 55° rhombic geometry produces favourable cutting directions for both external profiling and light internal turning, while the single-sided chipbreaker helps control chip form in typical turning feeds. For users with limited fixture rigidity, this formulation reduces vibration sensitivity and contributes to higher first-pass yields. Simple integration with ISO tooling systems Designed to the ISO standard, the insert fits holders and boring bars where form, clearance angle, tolerance class, fastening, size and thickness match the specification. The presence of a cylindrical locating hole with a 40°–60° single-sided countersink ensures secure clamping and repeatable seating in compatible toolholders. Compatibility relies on matching the insert’s geometry and thickness (3.97 mm) to the chosen seat; when paired correctly, the system provides swift indexability and minimal set-up time. This standardisation supports efficient tool inventory management and simplifies changeover in mixed-machine environments. Practical benefits: tool life, productivity and surface quality By combining a coated cemented-carbide composition with an optimised chipbreaker, the insert offers prolonged usable life under normal turning regimes, particularly where small tools are used or engagement conditions vary. The 7° clearance angle reduces flank rubbing and improves surface finish, while the grade selection helps maintain a stable cutting edge over repetitive indexings. For production-focused workshops, this translates into fewer interruptions, more predictable consumable consumption and improved throughput without sacrificing component quality. Choosing the right application and grade This insert is intended for general turning tasks; select the matching chipbreaker and grade for the workpiece material and machining strategy. The SH7025 grade is described as a tough, edge-stable option suited to turning jobs where intermittent cutting or small-tool setups are common. When machining ductile or variable alloys, a tougher grade reduces edge chipping; for harder or abrasive materials, consider alternative grades optimised for wear resistance. Always ensure holder compatibility by checking form, size and fastening details before assembly. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts and to secure original ISO inserts for immediate delivery; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6967479 Manufacturer SKU: TUN6967479 SKU: 6967479-Tungaloy Designation: DCGT11T300 SH7025 Tungaloy insert Model series: ISO turning indexable inserts Facts Size: 11 mm Thickness: 3.97 mm Clearance angle: 7° Geometry angle: 55° Hole: with hole Special features Material: cemented carbide Coating / grade: SH7025 (coated) Shape: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: turning Compatibility note: ISO-standard insert — compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DCGT11T300 SH7025 Tungaloy insert is formulated as a tough, edge-stable coated carbide suitable for a broad range of turning applications; select the chipbreaker and cutting data according to the specific workpiece material. How does the SH7025 grade affect tool life? SH7025 provides increased edge stability and toughness, which helps maintain usable life under intermittent cuts and varying engagement conditions typical in turning operations with smaller tools. Can this insert be used for both external and internal turning? Yes, the rhombic 55° geometry and ISO configuration enable use in both external and light internal turning when mounted in compatible holders or boring bars. What is the significance of the cylindrical hole and countersink? The cylindrical hole with a 40°–60° single-sided countersink ensures secure clamping and repeatable seating in compatible toolholders, improving indexability and stability during machining. Is the DCGT11T300 regrindable? Indexable inserts of this type are consumable and are typically replaced rather than reground; the SH7025 grade is intended to provide consistent performance over multiple indexing positions until wear limits are reached. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide grade for edge stability and an ISO‑standard rhombic geometry to keep machining cycles consistent; the DCGT11T300 SH7025 insert delivers secure clamping with a 3.97 mm plate thickness and a 7° clearance angle. Order via Metav Werkzeuge or ask the consultants for application guidance and availability. DCGT 11T300 SH7025 indexable turning insert for turning — Tungaloy A DCGT11T300 SH7025 indexable insert engineered for external and internal turning, offering a rhombic 55° geometry and a one‑sided chipbreaker for controlled chip flow. ISO 55° rhombic geometry, 7° clearance Coated carbide grade SH7025 for edge stability With cylindrical hole and single-sided countersink 3.97 mm plate thickness for secure clamping Consistent cutting performance with a robust coated carbide grade The use of a coated carbide grade such as SH7025 provides a balance between toughness and wear resistance, making the insert particularly suited to small tools and variable engagement conditions. This coating supports edge stability under interrupted cuts and fluctuating feed, which reduces the frequency of tool changes and contributes to higher machine uptime. As a result, cycle times become more predictable and the overall process efficiency improves, especially where repeatability and surface quality are priorities. Secure mounting and ISO compatibility for repeatable results Designed to the ISO specification DCGT11T300, the insert’s rhombic 55° shape and the 7° clearance angle ensure compatibility with a wide range of holders when form, tolerance class, attachment method, size and thickness align. The cylindrical hole with a single‑sided countersink (40°–60°) facilitates correct seating and torque transmission when clamped, while the 3.97 mm plate thickness delivers mechanical rigidity that reduces micro‑vibration. These features together support consistent chip control and repeatable positioning in serial production. Practical selection of chipbreaker and application benefits Equipped with a one‑sided chipbreaker, this indexable insert enables controlled chip formation when matched to the workpiece material and the chosen feed/speed parameters. Selecting the appropriate chipbreaker and the SH7025 grade for the expected engagement and stability results in longer tool life and improved surface finish. In practice, the insert’s specification helps to lower overall tooling costs by reducing downtime and maintaining surface tolerances with fewer interventions during turning operations. Contact Metav Werkzeuge for detailed application advice and current availability of the Tungaloy DCGT11T300 SH7025 indexable insert; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 7743491 Manufacturer SKU: TUN7743491 Model series: ISO-Drehwendeschneidplatten Type designation: DCGT11T300 Brand: Tungaloy Material: carbide Facts Plate size: 11 mm Plate thickness: 3.97 mm Clearance angle: 7° Included angle: 55° Manufacturer article number: 7743491 Special features Grade/coating: SH7025 (coated carbide) Chipbreaker: one-sided Hole style: cylindrical hole with single-sided countersink (40°–60°) Shape: rhombic Application: turning FAQ What is the clearance angle of this insert? The DCGT11T300 SH7025 indexable turning insert from Tungaloy features a clearance (relief) angle of 7°, aiding in smooth cutting action and reduced flank wear. Which geometry does the insert use and what does that mean for machining? The rhombic 55° geometry of the DCGT11T300 insert provides a versatile approach for both external and internal turning, offering a balance between strength and access to smaller diameters. How does the SH7025 grade affect performance? The SH7025 coated carbide grade on the Tungaloy insert emphasises toughness and cutting-edge stability, which is beneficial under variable engagement and interrupted cutting conditions. Is the insert suitable for automated clamping systems? Yes, the DCGT11T300’s cylindrical hole with a single‑sided countersink ensures reliable seating and secure clamping in compatible ISO holders; check holder compatibility by matching form and thickness. What is the manufacturer SKU and article number for ordering? The insert is listed under manufacturer SKU TUN7743491 and article number 7743491 for ordering and inventory reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 SH7025 Wendeplatten - Tungaloy
Take advantage of a combination of tough, edge-stable SH7025 and precise ISO conformity to improve process reliability in turning operations; the insert’s rhombic 55° geometry and 7° clearance ensure predictable engagement in small-tool or varying-cut conditions. Order via Metav Werkzeuge or consult the team for matching holders and clamping sets. DCGT 11T300 SH7025 – ISO turning insert by Tungaloy (rhombic 55° geometry, coated carbide) The DCGT11T300 SH7025 is an ISO-conforming turning insert designed for external and internal turning where small-tool stability and variable engagement demand a tough, edge-retaining grade. Coated carbide grade SH7025 Rhombic insert, 55° geometry 7° clearance angle for versatile turning Cylindrical hole with single-sided countersink Improve process stability with a tough, edge-retaining grade The SH7025 grade is a coated carbide developed for edge stability under changing engagement conditions and in compact tool setups. Its formulation prioritises toughness over extreme hardness, reducing chipping during interrupted cuts and offering consistent performance when tools are small or chip loads vary. This results in fewer unplanned indexings and steadier component quality, which contributes directly to predictable production output and lower rework rates. Fast integration into ISO turning systems with clear compatibility rules Built to the ISO turning standard, the insert fits into matching turning holders when form, clearance angle, tolerance class, fixing method, size and thickness align. The geometry offers a 55° included angle on a rhombic platform with an inscribed circle of 11 mm and a thickness of 3.97 mm, together with a 7° clearance angle. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°), so a correct holder, pad and clamping set are essential for repeatable seating and secure fastening. Specifying these parameters at the outset shortens setup time and reduces interface-related vibration. Reliable chip control and versatile turning performance A single-sided chipbreaker provides defined chip formation for many turning tasks; selecting the right chipbreaker and matching grade enables good chip control and helps achieve the desired surface finish with fewer passes. The insert is intended for both external and internal turning when paired with an appropriate holder and clamping hardware. In practice, the combination of a robust grade, controlled chip formation and standardised dimensions supports higher machine utilisation and more consistent part quality across batch and one-off work. Discuss application requirements with Metav Werkzeuge to select the right Tungaloy DCGT11T300 SH7025 turning insert for stable, productive machining; contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 7743497 Manufacturer SKU: TUN7743497 SKU: 7743497-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Inscribed circle: 11 mm Thickness: 3.97 mm Clearance angle: 7° Included angle: 55° ISO designation: 11T300 Special features Coated cemented carbide Grade SH7025 (tough, edge-stable) Rhombic plate form Single-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Compatible with ISO turning holders For external and internal turning System components: insert, holder, shim/clamp set and replacement screws FAQ What materials is this insert suited for? The SH7025 grade in the DCGT11T300 insert is designed as a tough, edge-stable option; material selection should be made according to the workpiece and cutting conditions, matching the grade and chipbreaker to achieve the best results with the Tungaloy turning insert. How does the insert index and secure in the holder? The DCGT11T300 insert seats in ISO-compatible holders using its cylindrical hole and single-sided countersink; correct clamping with the matching shim and screw ensures repeatable seating and secure fixation. Is the geometry suitable for internal turning? Yes, the 55° rhombic geometry and compact inscribed circle make the insert suitable for both external and internal turning when paired with an appropriate holder and setup. What is the benefit of the SH7025 grade? SH7025 provides enhanced toughness and cutting-edge stability, which reduces chipping risks in interrupted cuts or variable engagements and supports reliable performance in compact tooling configurations. Which components are required to assemble a turning system with this insert? A complete ISO turning system comprises the indexable insert, a compatible external holder or boring bar, a pad/shim and clamping set, plus the correct replacement screws for fastening. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 SH725 Wendeplatten - Tungaloy
Benefit from the combination of coated cemented carbide SH725, ISO‑standard rhombic geometry (55°) and a precise 7° clearance for consistent performance in turning operations; order via Metav Werkzeuge or contact the technical consultants for machining advice. DCGT DCGT11T300 SH725 — Indexable Insert for Turning by Tungaloy A DCGT11T300 SH725 indexable insert designed for general turning applications, offering a rhombic 55° geometry and a robust, edge‑stable coating suitable for varying engagement conditions and smaller toolholders. ISO‑standard rhombic 55° geometry Coated cemented carbide SH725 grade 7° clearance angle for secure cutting With cylindrical hole and countersink Geometry optimised for reliable turning performance The rhombic 55° geometry delivers a balanced approach to external and internal turning where a compromise between strength and accessibility is required. The 55° approach angle reduces radial cutting forces while maintaining rigidity, which improves tool life under interrupted cuts. The 7° clearance maintains a controlled relief behind the cutting edge to reduce rubbing and heat build‑up. These geometric choices result in a stable cutting process and predictable chip formation for workshop and production environments. Material and coating for improved edge stability and lifetime Manufactured from coated cemented carbide and graded SH725, the insert is tailored for applications that demand a tough, wear‑resistant cutting edge. The coating improves flank wear resistance and helps preserve edge sharpness during variations in engagement, making the plate suitable for mixed batch work and tools with smaller diameters. The result is extended in‑service life and less frequent insert changes, supporting higher productivity and lower tooling costs per component. Practical compatibility and handling guidance The insert follows ISO standards for indexable turning plates, which simplifies selection for compatible toolholders. Compatibility depends on the insert form, clearance angle, tolerance class, fixing method, size and thickness; ensure the holder accepts a DCGT11T300 profile with a central hole and countersink. The plate features a single‑sided chipbreaker, designed to control chip flow in common turning operations. For reliable clamping, match the substrate thickness and clamping set with the specified 3.97 mm plate thickness and 11 size designation. Benefits in process stability and application flexibility Choosing a grade that emphasises edge stability allows consistent performance when machining varying materials or when process parameters change during a production run. The combination of a robust substrate and a tailored coating reduces unplanned downtime and supports higher first‑pass yields. For operations that alternate between small‑diameter holders and heavier engagements, this insert provides a pragmatic balance between toughness and wear resistance. For specification support or to secure the DCGT11T300 SH725 insert from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and quick availability. Technical data Article number: 6838673 Manufacturer SKU: TUN6838673 Internal SKU: 6838673-Tungaloy Model series: ISO‑indexable turning inserts Label: DCGT11T300 SH725 Tungaloy‑insert Key figures Insert designation: DCGT11T300 Insert size: 11 Thickness: 3.97 mm Geometry angle: 55° Clearance angle: 7° Design / Special features Coated cemented carbide, grade SH725 Rhombic insert form Single‑sided chipbreaker With hole: cylindrical hole plus one‑sided countersink (40°–60°) ISO‑standard plate for turning Compatibility determined by form, clearance, tolerance, fixing, size and thickness FAQ What material applications suit this insert best? The DCGT11T300 SH725 insert is designed for turning and performs well in a broad range of steels and mixed batches thanks to the SH725 grade and coated cemented carbide construction. How is the insert clamped in the holder? Clamping requires a holder that accepts the DCGT11T300 rhombic form with a central cylindrical hole and one‑sided countersink; match the holder’s tolerance class and clamping set to the insert thickness for secure fixing. Does the insert work for internal and external turning? Yes, the 55° rhombic geometry and single‑sided chipbreaker make the insert suitable for both external and internal turning operations where access and edge strength must be balanced. What advantage does the SH725 grade offer? SH725 provides enhanced edge stability and wear resistance, especially useful for smaller tools or when cutting conditions vary; this results in fewer insert changes and improved process reliability. Which dimensions are critical when selecting a compatible holder? Critical dimensions include the insert size (11), thickness (3.97 mm), geometry angle (55°) and the presence and style of the central hole and countersink; ensure the holder is ISO‑compatible for DCGT profiles. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T300 SH725 Wendeplatten - Tungaloy
Take advantage of the SH725 coated carbide grade combined with ISO conformity and precise 55° geometry to maintain stable cutting edges and consistent turning results; order the DCGT11T300 insert directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. DCGT11T300 SH725 indexable turning insert — Tungaloy, 55° rhombic geometry The DCGT11T300 SH725 is an ISO-standard indexable insert designed for general turning applications, suitable for external and internal operations where robustness and edge stability are required. DCGT 55° rhombic cutting geometry SH725 coated carbide for durable cutting edges 7° clearance angle for reduced flank contact Cylindrical hole with single countersink 40°–60° Consistent cutting performance with a tough coated carbide grade The combination of the SH725 coating and carbide substrate provides a balance of toughness and wear resistance that supports repeated indexation and long runtimes under variable engagement conditions. The one-sided chipbreaker improves chip control for many turning tasks, reducing interruptions and helping to protect the toolholder from irregular chip flow. Because the grade is optimised for smaller tools and changing cut conditions, the insert is particularly suitable where stable cutting edges are needed to maintain dimensional accuracy and surface finish over multiple passes. Secure clamping and predictable geometry for reliable results Manufactured to ISO dimensions, this insert’s 55° rhombic form and 7° clearance angle influence approach behaviour and contact area with the workpiece, which in turn affects cutting forces and surface quality. The insert measures 11 (size designation) with a thickness of 3.97 mm, and the central cylindrical hole with single countersink (40°–60°) ensures reliable seating and repeatable clamping in compatible holders. Compatibility depends on the holder’s form, rake/freedom angles, tolerance class, fastening system, size and thickness; selecting a matching external holder or boring bar is essential for safe, vibration-free operation. System-level efficiency and practical application guidance Used as a component of a complete tooling system — insert, appropriate external holder or boring bar, underlay/clamping set and spare screws — this ISO insert supports productive turning workflows. Its coated carbide construction and chipbreaker design simplify processing across a broad range of steels and mixed materials when the correct grade and chipbreaker are selected. For best results, choose cutting parameters and holder rigidity matched to the workpiece and machining strategy; this conserves tool life and enhances process stability while delivering consistent surface quality and dimensional repeatability. Contact Metav Werkzeuge to discuss Tungaloy inserts, specify the DCGT11T300 SH725 for your turning tasks and obtain tailored recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737021 Manufacturer SKU: TUN6737021 SKU: 6737021-Tungaloy Model series: ISO indexable turning inserts Facts Geometry / approach angle: 55° Clearance angle: 7° Thickness: 3.97 mm Size designation: 11 Hole: with hole; cylindrical + single countersink (40°–60°) Special features Coated carbide, SH725 grade Rhombic insert shape One-sided chipbreaker ISO-standard series for turning Suitable for external and internal turning System components: insert, holder, underlay/clamping set, spare screws FAQ Which applications suit this insert best? The DCGT11T300 SH725 indexable turning insert is intended for general external and internal turning where a tough, edge-stable SH725 grade is beneficial, particularly with smaller tools or variable engagement conditions. How does the hole and countersink affect clamping? The cylindrical hole with a single countersink (40°–60°) ensures stable seating and repeatable clamping in compatible holders, improving concentricity and reducing the risk of insert movement during cutting. What materials is the insert intended for? The SH725 coated carbide grade provides balanced toughness and wear resistance suitable across a broad range of common turning materials; select the chipbreaker and cutting data according to the specific workpiece material and machining strategy. What key measurements determine compatibility with a holder? Compatibility is determined by the insert’s form (rhombic 55°), 7° clearance, size designation (11), thickness 3.97 mm, tolerance class and the holder’s fastening system. Can the insert be used on both external and internal operations? Yes, the ISO-standard geometry and chipbreaker make this insert suitable for both external and internal turning when paired with an appropriate external holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 SH725 Wendeplatten - Tungaloy
High edge stability and broad material suitability ensure consistent, productive turning operations; the combination of the SH725 coated carbide and the 55° rhombic geometry supports reliable chip control and repeatable performance. Order this insert directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. DCGT11T300 SH725 — Indexable Turning Insert (coated carbide, 55°) by Tungaloy DCGT11T300 SH725 is an ISO‑standard indexable insert designed for precision external and internal turning within standard holder systems. ISO indexable turning insert Coated carbide SH725 for edge stability Rhombic 11 size, 55° geometry Central hole with 40°–60° countersink Consistent cutting performance for productive turning The SH725 grade is a coated carbide composition tailored for stable cutting edges and resilient behaviour under varying engagement conditions. With a 55° rhombic geometry and 7° clearance, this solution delivers a balance of strength and accessibility for external and internal turning tasks. The single‑sided chipbreaker is engineered for predictable chip formation; this reduces risk of workpiece damage and contributes to longer tool life while maintaining surface finish quality. Practical benefits include fewer insert changes and lower downtime per batch due to the combination of stable edge retention and reliable chip control. Clear compatibility and installation guidance Compatibility with toolholders depends on geometry, clearance, tolerance class, fastening method, size and thickness; the ISO series designation simplifies selection across standard holders and boring bars. The insert’s central hole with a cylindrical bore and one‑sided countersink (40°–60°) enables secure clamping and repeatable seating. The nominal plate size is 11 with a thickness of 3.97 mm, suited to compact assemblies and smaller tooling setups where space and rigidity must be balanced. For customers assessing integration, Metav Werkzeuge can provide holder matching guidance and cutting parameter suggestions. Material scope and process efficiency The coated carbide grade is optimised for turning a wide range of materials under mixed conditions, offering strong performance on steels and alloyed materials where edge stability and wear resistance are essential. Selecting the appropriate chipbreaker and grade reduces machining times and improves first‑pass yields, which enhances overall process economy. When high‑speed capability or specific workpiece materials are required, the combination of this insert’s geometry and the SH725 coating supports consistent results with fewer interruptions for edge changes. For application support or to secure a supply of DCGT11T300 SH725 inserts, contact Metav Werkzeuge for tailored advice and ordering assistance. Technical data Article number: 6737137 SKU: 6737137-Tungaloy Manufacturer SKU: TUN6737137 Model series: ISO turning indexable inserts Application: Turning Facts Size: 11 Plate thickness: 3.97 mm Free clearance angle: 7° Main geometry angle: 55° ISO code: 11T300 Special features Material: coated carbide (SH725) Plate form: rhombic Chipbreaker: single-sided Hole: with central hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Compatibility: ISO‑standard holder systems FAQ What types of turning operations suit this insert? The DCGT11T300 SH725 insert is intended for both external and internal turning in ISO‑system setups and is especially useful where edge stability under variable engagement occurs. Which materials can be machined with this grade? The SH725 coated carbide grade is designed for broad material coverage, performing well on steels and alloyed steels where robust edge retention is required. How is the insert secured in the holder? The insert features a central cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping and repeatable seating in compatible ISO holders. Is the geometry suitable for fine finishing or heavier cutting? The 55° rhombic geometry and single‑sided chipbreaker support a balance between accessibility for finishing and strength for moderate cutting; toolpath and cutting data should be adapted to the workpiece and machine rigidity. Can Metav Werkzeuge advise on matching holders and cutting data? Yes; Metav Werkzeuge provides guidance on holder compatibility and cutting parameters to help integrate the insert into existing tool systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide, ISO conformity and a rhombic 11 mm geometry to secure stable cutting performance and consistent tool life in turning operations; order directly via Metav Werkzeuge or consult the technical team for application guidance. DCGT 11T300 SH725 — DCGT indexable insert for turning (Tungaloy) DCGT11T300 SH725 is an ISO-conforming indexable insert designed for precision external and internal turning, offering a tough, edge-stable grade for variable engagement conditions and small-tool applications. ISO-conforming rhombic insert 55° Coated carbide grade SH725 7° clearance for reliable chip flow Cylindrical hole with 40°–60° countersink Reliable cutting performance for demanding turning tasks The combination of a coated carbide substrate and the SH725 grade delivers a balance of toughness and edge stability suited to dynamic turning conditions. This insert’s rhombic geometry at a 55° included angle provides a favourable cutting orientation that reduces radial loads, while the 7° clearance helps avoid rubbing and improves surface finish. The result is a component that supports steady metal removal rates, contributing to reduced tool changes and a smoother production flow. Compatibility and secure clamping to reduce downtime ISO standardisation ensures straightforward selection and interchangeability provided the holder matches in shape, clearance angle, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) which permit positive clamping and repeatable location in many external holders and boring bars. Specifying the correct holder and clamp set means simplified logistics and fewer compatibility checks on the shop floor. Improved chip control and application flexibility A single-sided chipbreaker on this grade supports consistent chip formation and evacuation during turning, which reduces the risk of built-up edge and improves process stability. The grade’s emphasis on edge robustness makes it particularly suitable when using smaller cutters or when cutting conditions vary during a cut. Select the chipbreaker style and insert grade according to workpiece material and the desired finish to achieve efficient machining with predictable tool life. System approach for practical workshop integration The ISO insert is part of a simple system: the indexable insert, a matching external holder or boring bar, a shim/clamp set and spare fixing screws. Keeping spare clamps and screws in inventory and using standardised holders compatible with ISO geometry minimises machine downtime and streamlines maintenance. For production environments aiming for repeatable results, this modular approach supports fast insert changes and consistent clamping forces. For application-specific advice or stock enquiries for Tungaloy SH725 inserts, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and availability. Technical data Article number: 6737014 Manufacturer SKU: TUN6737014 SKU: 6737014-Tungaloy Model series: ISO turning indexable inserts Material: carbide Coating / grade: SH725 Facts Size: 11 mm Thickness: 3.97 mm Clearance angle: 7° Insert angle: 55° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic plate form Single-sided chipbreaker ISO-standard insert Designed for turning applications Compatible with external holder or boring bar System components: insert, holder or boring bar, shim/clamp set, spare screws Tough, cutting-edge-stable grade suited to small tools and varying engagement FAQ What turning tasks is this insert best suited for? The DCGT11T300 SH725 indexable insert from Tungaloy is intended for external and internal turning where a tough, stable cutting edge is required, especially in applications with small tools or fluctuating engagement conditions. How is the insert secured in the holder? Retention uses the cylindrical hole with a single-sided countersink (40°–60°); compatibility depends on matching shape, clearance angle, tolerance class, fastening type, size and thickness to the chosen holder or boring bar. What chip control can be expected from this grade? The single-sided chipbreaker on the DCGT11T300 promotes controlled chip formation and evacuation, improving process stability and reducing the likelihood of built-up edge during turning. Can this insert be used interchangeably with other ISO holders? Yes, provided the holder matches the ISO geometry and the specified size, thickness, clearance angle and fastening arrangement; this ISO conformity facilitates interchangeability across compatible systems. Which system components should be stocked to ensure rapid insert changes? Keep compatible holders or boring bars, a shim/clamp set and spare fixing screws aligned to the ISO insert dimensions to enable fast, repeatable insert changes and minimise machine downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 SH730 Wendeplatten - Tungaloy
Combining SH730 coating performance with ISO-compliant geometry and a secure clamping interface results in consistent edge stability and predictable tool life in turning operations. Order the DCGT11T300 SH730 insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT11T300 SH730 indexable insert for turning — Tungaloy, ISO rhombic DCGT, 11 mm, 7° clearance DCGT11T300 SH730 is an ISO‑standard rhombic insert designed for general turning tasks; optimised for small tools and variable engagement conditions. ISO rhombic DCGT geometry SH730 coated carbide grade One-sided chipbreaker for stable cutting Cylindrical hole with single-sided countersink Consistent cutting performance for demanding turning tasks The coated cemented carbide grade SH730 is formulated for edge stability and reliable wear behaviour, especially in applications with variable cut engagement. By choosing a tougher, chip‑resistant grade, the insert reduces the frequency of tool changes and maintains a stable cutting edge over a range of interruption and feed conditions. This leads to improved process consistency and a more uniform surface finish on turned components, which supports predictable cycle times and lowers overall machining costs. Secure mounting and ISO compatibility for easy integration Designed to ISO standards, the rhombic geometry and defined clamping features ensure precise seat and repeatable positioning in compatible holders. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) and a nominal size of 11 mm with a thickness of 3.97 mm, combined with a 7° clearance angle and a 55° included angle—dimensions that enable secure clamping and stable behaviour in both external and internal turning applications. The ISO conformity simplifies tool selection and replacement; the system is completed by a matching outer holder or boring bar, a support/clamping set and replacement screws, which are selected according to holder form, tolerance class and fastening method. Efficient chip control and economic machining The one‑sided chipbreaker is configured to assist stable chip formation under many machining scenarios, reducing the risk of entanglement and improving evacuation in shorter overhangs and smaller tool setups. Combined with the SH730 coating, this results in longer effective tool life and fewer interruptions for insert changes. Process security is enhanced by the predictable wear progression and the ability to select the chipbreaker and grade to match workpiece material and machining stability, thereby improving productivity and lowering per‑part costs while maintaining workpiece quality. For tailored advice on integrating genuine Tungaloy DCGT11T300 SH730 inserts into production or to confirm compatibility with existing holders, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our technical consultants will assess the application and availability. Technical Data Article number: 6853999 Manufacturer SKU: TUN6853999 SKU: 6853999-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Designation: DCGT11T300 SH730 Core specifications Insert size: 11 mm Thickness: 3.97 mm Clearance angle: 7° Included angle: 55° Hole: cylindrical hole + single-sided countersink (40°–60°) Special features Rhombic shape (DCGT) One-sided chipbreaker Coated cemented carbide grade SH730 ISO-compliant geometry; compatible with ISO holders Suitable for external and internal turning; select chipbreaker and grade per material and stability System components: matching outer holder or boring bar, underlay/clamping set and spare screws FAQ What types of turning is this insert suited for? The DCGT11T300 SH730 insert from Tungaloy is intended for both external and internal turning where stable edge performance and good chip control are required; the one‑sided chipbreaker supports a wide range of engagement conditions. How does the SH730 grade affect tool life? SH730 is a tougher coated cemented carbide grade that offers improved edge stability under variable cutting conditions, so the DCGT11T300 insert typically shows more predictable wear and extended effective life compared with less tough grades. Which holder features are required for correct mounting? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the DCGT11T300 requires an ISO‑compliant DCGT seat and the specified clamping arrangement for repeatable positioning. Can the insert be used with short overhangs and small‑tool setups? Yes, the SH730 grade and the one‑sided chipbreaker are particularly suitable for smaller tools and changing engagement conditions, helping to maintain stable cutting and chip evacuation in compact setups. Is the insert supplied with fastening hardware? The insert is delivered as the indexed cutting plate; a matching outer holder or boring bar, support/clamping set and replacement screws are usually selected separately to match the machine‑specific clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T300 TH10 Wendeplatten - Tungaloy
Combining a sharp, TH10 uncoated carbide grade with the ISO rhombic DCGT geometry and a 7° relief angle, this insert delivers low cutting forces and consistent surface quality for non‑ferrous turning. Order the DCGT11T300 TH10 turning insert directly via Metav Werkzeuge or consult the technical team for application guidance. DCGT 11T300 TH10 ISO turning indexable insert, Tungaloy DCGT11T300 TH10 is an ISO‑compliant turning insert intended for external and internal turning of non‑ferrous materials and general‑purpose lathe work Sharp uncoated carbide grade TH10 ISO DCGT 11T300 rhombic 11 size 7° relief angle for low cutting forces Cylindrical hole with 40°–60° countersink Lower cutting forces and improved surface finish The use of uncoated carbide in the TH10 grade provides a reliably sharp cutting edge that reduces feed resistance and friction, which in turn leads to low cutting forces and a clean surface finish on non‑ferrous components. Uncoated grades are particularly effective where minimal built‑up edge formation is required; the absence of a coating keeps the cutting edge keen and helps maintain dimensional accuracy on delicate workpieces. For production environments where surface integrity and minimal secondary finishing are priorities, this behaviour directly reduces rework and cycle time. Reliable fit and secure clamping for stable turning Manufactured to ISO geometry, the DCGT 11T300 form combines a rhombic profile with a securely located hole and a single‑side countersink to ensure consistent seating in the holder. The 7° relief angle and a 55° included angle contribute to predictable engagement and reduced radial cutting load. Compatibility with a holder depends on form, relief angle, tolerance class, fastening and thickness, so selecting the correct carrier or boring bar is essential. The cylindrical hole with a 40°–60° countersink provides firm clamping and repeatable positional accuracy, supporting high process stability even on long overhangs when the rest of the setup is optimised. Better chip control with a single‑sided chipbreaker A single‑sided chipbreaker is integrated to aid chip formation and evacuation when machining softer, ductile materials. For non‑ferrous turning, this chip geometry encourages short, manageable chips that are less likely to wrap or interfere with the workpiece, improving operator safety and reducing interruptions. Choosing the appropriate chipformer and grade relative to the material and machining parameters enhances productivity; in less rigid setups the chipformer helps mitigate vibration‑induced poor surface quality and tool wear. Easy system integration and workshop efficiency The insert forms part of a modular system comprising the indexable insert, matching external holder or boring bar, a shim/clamp set and replacement screws. The standardised ISO designation simplifies inventory management by ensuring interchangeability across compliant holders, while the clear geometry and robust hole design make assembly and index changes straightforward. For job shops and production lines aiming for predictable throughput, the combination of grade, geometry and secure fastening reduces downtime for tool changes and supports consistent component quality. Contact Metav Werkzeuge for tailored selection advice or to request application data and availability; technical consultations and specifications are available from the Metav Werkzeuge team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6802813 Manufacturer SKU: TUN6802813 Internal SKU: 6802813-Tungaloy Model series: ISO turning indexable inserts Material: carbide Dimensions & angles Insert size: 11 mm Thickness: 3.97 mm Relief angle: 7° Included angle: 55° Countersink angle: 40°–60° Design & features Geometry: rhombic (DCGT) Hole: cylindrical hole with single‑side countersink Chipbreaker: single‑sided Grade/coating: TH10 uncoated carbide Application: turning; external and internal turning System components: insert, holder or boring bar, shim/clamp set, replacement screws FAQ Which materials are suitable for this insert? The DCGT11T300 TH10 insert is optimised for non‑ferrous materials; the TH10 uncoated carbide grade supports clean cutting on brass, aluminium alloys and similar softer metals. How is compatibility with a lathe holder ensured? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the ISO rhombic DCGT form and the insert’s hole geometry match ISO‑compliant holders when the corresponding holder specification is used. What are the main benefits of the TH10 grade? TH10 is a sharp, universal uncoated carbide grade that reduces cutting forces and helps achieve a good surface finish when machining non‑ferrous components with consistent results. How does the chipbreaker influence machining? The single‑sided chipbreaker promotes short chip formation and reliable evacuation during turning, which improves process stability and reduces the risk of chip entanglement. Is the insert suitable for both external and internal turning? Yes; the design and geometry make the DCGT11T300 TH10 appropriate for both external and internal turning operations when paired with a suitable holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T300 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of an uncoated carbide cutting edge and a precisely defined geometry to achieve low cutting forces and clean surface finish in turning applications; the rhombic 55° form and ISO compatibility ensure straightforward integration into established tool systems. Order the insert directly via Metav Werkzeuge or consult the technical team for holder recommendations and availability. DCGT11T300 TH10 indexable turning insert by Tungaloy — uncoated carbide, 55° rhombic The DCGT11T300 TH10 is an ISO-standard indexable turning insert designed for external and internal turning, offering a sharp, uncoated carbide edge tailored to non-ferrous materials and operations that benefit from low cutting forces. ISO rhombic insert, 55° cutting edge angle Uncoated carbide grade TH10 for low cutting forces Single-sided chipbreaker for controlled chip formation Cylindrical hole with one-sided countersink (40°–60°) Consistently low cutting forces for cleaner finishes The insert’s uncoated carbide composition and TH10 grade deliver a sharp, wear-resistant cutting edge that supports reduced cutting resistance and improved surface quality when machining aluminium alloys and other non-ferrous materials. The single-sided chipbreaker is engineered to promote stable chip formation under typical turning conditions; this reduces the need for extensive downstream finishing and helps maintain predictable tool behaviour. Where tougher materials or interrupted cuts are present, selection of an alternative chipbreaker or grade is advisable to maintain process stability. Precise geometry and ISO compatibility for reliable tool set-up As an ISO-standard indexable insert, compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening, size and thickness. The rhombic form with a 55° cutting edge and a relief angle of 7° enables flexible approach angles for diverse turning tasks, while the 3.97 mm plate thickness supports secure clamping and repeatable positioning. The insert’s cylindrical hole with one-sided countersink simplifies fastening and ensures consistent seat contact; matching the correct holder geometry is essential to make full use of these advantages. Production benefits that support efficient machining In series production, the combination of a sharp, uncoated edge and a dedicated chipbreaker contributes to reduced cycle times through lower feed forces and improved surface integrity. The insert is suitable for both external and internal turning operations where material choice and machine stability favour an uncoated edge. This results in a practical balance between tool life and finish quality, rendering the insert a cost-effective option for many shop-floor scenarios. Clear labelling and ISO conformity further reduce set-up time and ease inventory management. Contact Metav Werkzeuge for application advice and holder matching for the Tungaloy DCGT11T300 TH10 insert; technical data and immediate availability can be provided by Metav Werkzeuge, info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6802816 SKU: 6802816-Tungaloy Manufacturer SKU: TUN6802816 Designation: DCGT11T300 TH10 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Plate form: rhombic Plate size: 11 Plate thickness: 3.97 mm Cutting edge angle: 55° Relief angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Materials & application Material: carbide Coating: none (uncoated) Grade: TH10 Chipbreaker: single-sided Application: turning (external and internal) Typical use: non-ferrous materials, operations favouring low cutting forces FAQ Which materials are best machined with this insert? The DCGT11T300 TH10 indexable turning insert (Tungaloy, SKU 6802816-Tungaloy) is optimised for non-ferrous materials such as aluminium alloys and similar workpiece materials where a sharp uncoated edge supports low cutting forces and clean surfaces. Is this insert compatible with standard ISO toolholders? Yes; the insert follows ISO indexable insert conventions and compatibility depends on matching the holder by form, relief angle, tolerance class, fastening method, size and thickness to the DCGT11T300 TH10. What advantage does the uncoated TH10 grade offer? The uncoated TH10 grade provides a sharp, consistent cutting edge that reduces cutting resistance and supports improved surface finish when machining soft to medium-hard non-ferrous materials. How does the chipbreaker influence machining behaviour? The single-sided chipbreaker on the DCGT11T300 TH10 promotes controlled chip formation for typical turning feeds and depths, improving evacuation and reducing the risk of entangling long chips. Are there specialised holder recommendations for this insert? For optimal performance, pair the DCGT11T300 TH10 insert with holders designed for rhombic 55° inserts and compatible clamping systems; Metav Werkzeuge can advise on holder selection for specific machining setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH725 carbide and ISO 55° rhombic geometry for stable chip formation, reliable edge life and consistent process security; order the DCGT11T301 AH725 indexable insert directly via Metav Werkzeuge or consult the advisory team for application support. DCGT11T301 AH725 DCGT turning indexable insert — Tungaloy The DCGT11T301 AH725 is an ISO-standard rhombic indexable insert for external and internal turning, offering a universal, fracture-resistant grade for steel and stainless steels. PVD-coated AH725 carbide grade Universal for steel and stainless steel Rhombic 55° geometry for versatile turning 0.1 mm nose radius; 3.97 mm thickness Increased process reliability from a universal grade The combination of PVD-coated carbide and the AH725 grade provides a balanced performance for mixed-production environments. This fracture-resistant grade is engineered to maintain a stable cutting edge under changing workpiece materials and in operations where smaller tool sizes or interrupted cuts occur. Stable chip formation reduces unplanned downtime and contributes to predictable tool life, which in turn supports improved machining economics and consistent production output. Geometry that improves accuracy and surface quality A rhombic 55° geometry with a 0.1 mm nose radius delivers a blend of versatility and finishing capability. The small radius aids fine surface finishes and light finishing passes, while the insert thickness of 3.97 mm and the 7° relief angle ensure mechanical stability during heavier engagement. The single-sided chipbreaker is optimised for common turning operations and helps control chip flow; the result is reduced rework and more consistent part quality. The insert’s ISO conformity guarantees straightforward selection when replacing or specifying tooling for existing holders. Compatibility and practical mounting for reliable clamping The insert fits ISO turning systems where compatibility is determined by shape, relief angle, tolerance class, fixing method, size and thickness. A cylindrical hole with one-sided countersink (40°–60°) provides secure clamping when combined with the correct seat pad or clamping kit and replacement screws. For assembly, match the insert geometry to the corresponding external holder or boring bar and verify the seat and screw type. Selecting a chipbreaker and grade tuned to the workpiece material optimises cutting forces and surface integrity in turning and internal boring applications. Contact Metav Werkzeuge for tailored recommendations on the DCGT11T301 AH725 insert; technical advisors are available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 and can advise on holder compatibility and machining parameters Technical data Article number: 6857011 Manufacturer SKU: TUN6857011 Metav SKU: 6857011-Tungaloy Model series: ISO turning indexable inserts Product name: DCGT11T301 AH725 Tungaloy insert Dimensions / core data Size: 11 mm Thickness: 3.97 mm Nose radius: 0.1 mm Relief angle: 7° Included angle: 55° Materials / special features Material: PVD-coated carbide (AH725) Chipbreaker: single-sided Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Application: external and internal turning Compatibility: ISO form, tolerance class, fixation, size and thickness FAQ Is this insert suitable for stainless steels? Yes. The DCGT11T301 AH725 insert by Tungaloy is formulated as a universal, fracture-resistant grade specifically suitable for steel and stainless steels, making it a reliable choice where mixed materials are processed. Which holders and seats are compatible with this insert? Compatibility follows ISO standards: the insert requires a matching holder or boring bar that corresponds to the rhombic form, relief angle, tolerance class, fixation method, size and thickness indicated for the DCGT11T301 AH725. What surface finish can be achieved with the 0.1 mm radius? A 0.1 mm nose radius assists in achieving fine surface finishes on turning passes; combined with the PVD coating and correct cutting data, the result is improved surface integrity and reduced risk of built-up edge. Is the AH725 grade suitable for interrupted cutting or small tools? The AH725 grade is designed to be fracture-resistant and is therefore well suited to applications with interrupted cuts, operations using smaller tools, or where high process security is required. How is the insert secured in the holder? The insert features a cylindrical hole with a one-sided countersink (40°–60°), requiring the appropriate pad, clamping set and replacement screws to ensure secure and repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO standard form, a coated cermet grade optimised for finishing, and precise geometry for predictable surface quality and tool life; order inserts directly via Metav Werkzeuge or request guidance from their technical team. DCGT 11T301 AT9530 — DCGT indexable insert for turning by Tungaloy, finishing cermet, R0.1 A DCGT11T301 AT9530 indexable turning insert engineered for finishing and light turning of steel, prioritising surface quality and uniform wear characteristics. ISO form DCGT 11T301 for standard holders Coated cermet AT9530 for finishing steel 0.1 mm corner radius for fine surface finish One-sided chipbreaker and 7° clearance Delivering consistent finishing performance for steel components The insert is based on a coated cermet grade designed specifically for finishing and light machining of steel, where a high-quality surface finish and even flank wear are primary goals. Cermet combines ceramic hardness with metallic toughness, which means the cutting edge resists abrasive wear while maintaining edge stability; the result is fewer rework cycles and more consistent part quality. This makes the component particularly suitable for applications where surface integrity and repeatable results matter. Geometry engineered for predictable cutting behaviour The ISO form DCGT 11T301 and rhombic outline (55° included angle) provide compatibility with common external holders while enabling access to tight profiles. The 0.1 mm corner radius and 7° clearance reduce the risk of edge chipping during light finishing passes, and the one-sided chipbreaker assists controlled chip formation at low to moderate feeds. These geometric choices translate into a stable cutting process and improved reproducibility of dimensional and surface targets. Easy integration into ISO-based tooling systems Compatibility with the toolholder depends on form, clearance angle, tolerance class, clamping and insert thickness; the ISO standardisation of the DCGT 11T301 simplifies selection for existing toolholding systems. The usual system consists of the insert, a matching external holder or boring bar, a locating shim or clamp set, and replacement screws — keeping inventory straightforward and changeovers fast. For workshops introducing the insert to a new setup, checking holder seat geometry and clamp type ensures the insert performs as intended. Operational economy through reduced finishing effort By combining a finishing-oriented grade with controlled geometry, the insert supports a machining strategy that can lower finishing times and reduce secondary operations. The consistent wear behaviour of the grade enables predictable regrinding or replacement intervals, contributing to reduced downtime and more reliable throughput. Where surface quality is a priority, selecting a finishing cermet insert can reduce inspection rejects and increase first-pass yield. For specification advice or to secure Tungaloy DCGT11T301 inserts for high-quality finishing, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our advisors will assist with holder compatibility and order options. Technical data Article number: 6967271 SKU: 6967271-Tungaloy Manufacturer SKU: TUN6967271 Model series: ISO turning inserts Dimensions & geometry Insert size: 11 Plate thickness: 3.97 mm Corner radius: 0.1 mm Clearance angle: 7° Included angle: 55° Features & materials Material: carbide Grade/coating: AT9530 (coated cermet) Shape: rhombic Hole style: cylindrical hole with one-sided countersink (40°–60°) Chipformer: one-sided Application: Turning Label: DCGT11T301 AT9530 Tungaloy insert FAQ What materials is this insert intended for? The DCGT11T301 AT9530 insert is specified for finishing and light machining of steel; the AT9530 coated cermet grade targets improved surface finish and uniform wear when turning steel components. Which holder characteristics must match the insert? Holder compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; ensure the external holder or boring bar matches the ISO DCGT 11T301 geometry. How does the 0.1 mm radius affect machining results? A 0.1 mm corner radius promotes a finer surface texture and reduces the risk of local edge overload during finishing passes, improving dimensional reproducibility and part appearance. Is chip control assisted by the insert geometry? Yes, the one-sided chipbreaker on this insert helps form manageable chips during finishing operations, aiding consistent evacuation and stable cutting conditions. Can the insert be used in internal turning? While primarily intended for external turning, the rhombic shape and ISO form can be applied in certain internal operations if the holder and approach geometry allow effective access. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 J740 Wendeplatten - Tungaloy
Take advantage of J740 carbide grade and the precise 0.1 mm corner radius for stable cutting and consistent surface quality; the insert’s ISO geometry and hole/countersink make it straightforward to fit into standard clamping systems — order via Metav Werkzeuge or consult our advisors for process matching. DCGT 11T301 J740 turning insert by Tungaloy — 55° rhombic, 0.1 mm radius The DCGT11T301 J740 is an ISO rhombic turning insert designed for external and internal turning, combining a balanced grade for wear resistance and edge stability with an ISO-compatible form for standard holders. ISO rhombic insert DCGT 11T301 J740 Tungaloy carbide grade for wear resistance 55° cutting angle for versatile turning Single-sided chipbreaker with centre hole Reliable cutting performance for general turning operations This indexable insert is engineered for consistent metal removal in both external and internal turning tasks. The J740 grade provides a balance of wear resistance and toughness, helping to maintain a stable cutting edge under varying cutting conditions. The rhombic geometry with a 55° included angle and a 0.1 mm radius helps produce good surface finishes while maintaining edge strength; the small corner radius reduces cutting forces for fine finishing passes without sacrificing repeatable performance. The ISO designation 11T301 ensures predictable positioning and compatibility across standard toolholder systems. Practical compatibility and setup guidance for efficient machining Compatibility with a holder depends on the insert’s form, 7° relief angle, tolerance class, clamping method, size and thickness. The insert’s 3.97 mm thickness and the central mounting feature — a cylindrical hole with a one-sided countersink (40°–60°) — enable secure clamping with conventional clamping kits and screws, simplifying changeovers. The single-sided chipbreaker is designed for effective chip control in a wide range of feeds; when machining different workpiece materials or switching from roughing to finishing, select the chipbreaker and grade to match the stability of the setup and the desired surface quality. Operational benefits that support productivity and tool life Using a carbide insert with the specified geometry reduces unplanned stoppages thanks to consistent wear behaviour and easier edge indexing. The combination of a controlled corner radius and the J740 substrate contributes to longer effective tool life and predictable tool-change intervals, which in turn supports stable cycle times and lower machining costs per component. The insert’s ISO form and central hole make inventory and replacement simple, aiding quick maintenance routines and steady production flow. For process advice, availability and to ensure the correct insert grade or chipbreaker for a specific application, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert consultation and fast delivery. Technical data Article number: 6802817 SKU: 6802817-Tungaloy Manufacturer SKU: TUN6802817 Facts Size: 11 mm Thickness: 3.97 mm Corner radius: 0.1 mm Relief angle: 7° Cutting angle: 55° Special features Material: Carbide Grade: J740 (Tungaloy) Shape: Rhombic Chipbreaker: Single-sided Hole: Cylindrical + one-sided countersink (40°–60°) Series: ISO turning indexable inserts Application: External and internal turning FAQ What machining tasks is this insert suitable for? The DCGT11T301 J740 insert is intended for external and internal turning where a balanced combination of wear resistance and toughness is required; it is suitable for general turning operations with a focus on consistent surface quality. How is holder compatibility determined for this insert? Compatibility depends on the insert’s form, relief angle, tolerance class, clamping method, size and thickness; the 3.97 mm thickness and central hole with countersink are designed for use with standard clamping assemblies. What effect does the 0.1 mm corner radius have on results? A 0.1 mm radius offers finer surface finishes and lower cutting forces compared with larger radii, while still providing adequate edge strength for finishing and light to medium turning passes. Can this insert be used with standard screws and seats? Yes — the cylindrical mounting hole with a one-sided countersink (40°–60°) enables secure clamping in common toolholders and facilitates straightforward indexable insert changes. When should a different chipbreaker or grade be chosen? Select the chipbreaker and grade based on the workpiece material, the machining type (roughing versus finishing) and the stability of the setup; the single-sided chipbreaker on this insert is aimed at reliable chip control across varied cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 J740 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, the J740 wear-resistant grade and a precise 0.1 mm corner radius for stable turning and predictable tool life. Order the original insert directly via Metav Werkzeuge or consult the technical team for holder compatibility and process optimisation. DCGT11T301 J740 indexable turning insert — Tungaloy, rhombic 11 mm, 7° clearance DCGT11T301 J740 is an ISO‑standard indexable insert designed for general turning applications, offering a balance of wear resistance and edge stability for production and workshop turning. ISO-standard rhombic insert 11 mm Tungaloy grade J740 for robust wear resistance One-sided chipbreaker for stable chip control Cylindrical hole with 40°–60° countersink Reliable chip control and longer cutting edge life The rhombic indexable insert combines the J740 carbide grade with a one-sided chipbreaker to provide controlled chip formation under a range of conditions. The chosen grade balances wear resistance and toughness, helping to maintain a stable cutting edge during short runs and repetitive operations. As the insert features a small 0.1 mm corner radius, it supports fine finishing passes while reducing the risk of corner chipping; this radius is suitable for parts requiring tighter edge definition without sacrificing tool life. Predictable mounting and dimensional compatibility for process stability Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The insert's 7° clearance angle and ISO designation ensure interchangeability with standard ISO turning holders when the correct seat and clamp are used. Selecting the appropriate holder and shim arrangement improves repeatability and reduces set‑up time on multi‑tool turrets. The insert is an element in a broader system of ISO inserts, matching holders, shims/clamp sets and replacement screws to maintain secure seating under cutting loads. Practical benefits for production turning and flexibility in operation With its 11 mm inscribed size and 3.97 mm thickness, the plate suits a wide range of external and internal turning tasks where a compact rhombic geometry is required. The cylindrical hole with a single‑side countersink (40°–60°) supports reliable clamping and helps to centre the insert accurately in the pocket. Because the grade is formulated for turning, the insert is appropriate for typical production conditions when the chipbreaker and grade are matched to the workpiece material and machining stability, giving consistent surface finish and predictable tool change intervals. Choose the right combination for the job The DCGT11T301 designation indicates the plate geometry and size; matching the chipbreaker style and J740 grade to the workpiece and process is essential for optimised results. For finish passes the small corner radius supports better surface integrity; for heavier cuts, opting for the same geometry with a different chipbreaker or a larger radius may be advisable. Technical advisors can explain the trade‑offs between edge stability, surface quality and cutting conditions to select the most economical solution for a given production requirement. For original Tungaloy inserts and application advice, contact Metav Werkzeuge — we can advise on holder compatibility, recommend the correct chipbreaker and supply genuine parts for reliable production results (eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930) Technical data Article number: 6802820-Tungaloy Manufacturer article number: 6802820 Manufacturer SKU: TUN6802820 Model series: ISO‑turning indexable inserts Numbers / Core technical data Inscribed size: 11 mm Thickness: 3.97 mm Corner radius: 0.1 mm Clearance angle: 7° Cutting angle: 55° Special features / Versions ISO designation: DCGT11T301 Grade: J740 (Tungaloy) Material: carbide Plate form: rhombic Chipbreaker: one‑sided Hole: cylindrical hole with single‑side countersink (40°–60°) Intended application: turning (external and internal) System notes: ISO insert with matching holder or boring bar, shim/clamp set and replacement screws Compatibility criteria: form, clearance angle, tolerance class, fixing, size and thickness FAQ What is the recommended application for this insert? The DCGT11T301 J740 insert is intended for turning operations, suitable for both external and internal turning when the chipbreaker and grade are matched to the workpiece and cutting conditions. What corner radius and thickness does the insert have? The insert has a corner radius of 0.1 mm and a thickness of 3.97 mm as specified for the DCGT11T301 geometry. How does the J740 grade affect performance? The J740 grade provides a balance of wear resistance and toughness, improving edge stability and helping to achieve consistent tool life under typical turning conditions. Which holders are compatible with this ISO plate? Compatibility is determined by holder form, clearance angle, tolerance class, fixing method, size and thickness; ensure the holder accepts DCGT‑style rhombic inserts and the seating matches the insert geometry. What is the purpose of the countersunk hole design? The cylindrical hole with a single‑side countersink (40°–60°) supports secure clamping and accurate centring in the pocket, enhancing repeatability during tool indexation and tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com