DCGT 11T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of high‑precision finishing, low cutting forces and ISO compatibility for consistently excellent surface quality. The cermet grade NS9530 delivers a sharp cutting edge and long service in continuous finishing cuts — order the inserts directly via Metav Werkzeuge or consult our specialists for cutting parameters. DCGT 11T302 NS9530 ISO rhombic turning insert for finishing — Tungaloy The DCGT11T302 NS9530 is an ISO‑standard rhombic turning insert designed for finishing operations on steel, offering a sharp cermet grade for low cutting forces and superior surface quality. Cermet finishing grade NS9530 Sharp cutting edge for fine finishes Low cutting forces for continuous cuts ISO rhombic 11 with 7° clearance High‑precision finishing with a cermet grade built for steel The combination of uncoated cermet and the NS9530 grade makes this insert ideal for delicate finishing passes on steel where a high surface finish is essential. The thin, sharp edge and optimised geometry reduce cutting forces, which is particularly beneficial for small depths of cut and continuous turning operations. For workshops seeking a reliable finishing solution, the cemented carbide substrate and cermet chemistry provide stable cutting behaviour and predictable surface results across batch production. System compatibility and secure clamping for dependable results Designed as an ISO‑type insert, compatibility with a holder is determined by form, clearance angle, tolerance class, fixation, size and thickness. The rhombic form with a 7° clearance and an included 0.2 mm corner radius supports precision positioning and repeatable part quality. The insert is supplied as part of a system comprising a suitable outer holder or boring bar, shim/clamping set and replacement screws; matching these elements ensures secure clamping and avoids chatter. For process planning, specify the ISO code and size so that the appropriate holder geometry can be selected with confidence. Productivity benefits and application guidance for production use As a finishing grade intended for continuous cutting and small feed/stroke values, the insert reduces rework and accelerates throughput by producing parts closer to final tolerance on the first pass. The one‑sided chipbreaker geometry helps form consistent chips when machining steel in steady conditions, supporting predictable tool life and surface integrity. For shops aiming to improve cycle times without sacrificing finish, this insert delivers a pragmatic balance of toughness and edge sharpness suitable for series production and precision components. Contact Metav Werkzeuge to discuss how the Tungaloy DCGT11T302 NS9530 can be integrated into existing turning cells or to request customised cutting data — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997935 SKU: 6997935-Tungaloy Manufacturer SKU: TUN6997935 Model series: ISO-Drehwendeschneidplatten ISO designation: DCGT11T302 Core specifications Corner radius: 0.2 mm Clearance angle: 7° Insert thickness: 3.97 mm Insert size: 11 Angle: 55° Special features Uncoated cermet grade NS9530 Material: cemented carbide Rhombic insert form One‑sided chipbreaker With hole; cylindrical hole + single‑sided countersink (40°–60°) Application: turning (finishing) Compatibility determined by form, clearance, tolerance, fixation, size and thickness System components: outer holder or boring bar, shim/clamping set, replacement screws FAQ What applications is this insert best suited for? The DCGT11T302 NS9530 insert is optimised for finishing on steel, especially continuous turning with small depths of cut where a high surface finish is required. Is the insert suitable for interrupted cuts? Given the uncoated cermet composition and its sharp edge, the DCGT11T302 performs best in continuous cuts; interrupted cuts may reduce edge life and are not the primary application. How does the one‑sided chipbreaker affect machining? The one‑sided chipbreaker on this grade promotes consistent chip formation during finishing passes, supporting stable cutting forces and improved surface quality with the NS9530 chemistry. What must be considered when matching a holder to this insert? Compatibility depends on insert form, clearance angle, tolerance class, fixation method, size and thickness; ensure the holder matches the ISO designation and the 11 size to guarantee correct seating and clamping. Can this insert be used on materials other than steel? This grade is specified for finishing steel; performance on other materials is not indicated in the available data and should be validated before production use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a purpose‑built NS9530 cermet grade for superior surface finish, a sharp cutting edge that reduces cutting forces, and ISO compatibility for straightforward tool integration; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCGT 11T302 NS9530 — Tungaloy indexable turning insert for finishing A DCGT11T302 NS9530 indexable insert designed for finishing in turning applications, offering a rhombic form with a 7° relief angle for continuous cuts and small depths of cut ISO-standard rhombic insert, 11 mm size NS9530 cermet for superior surface finish Sharp cutting edge for low cutting forces Single-sided chipbreaker with central hole Higher productivity through low cutting forces and better finishes The combination of the NS9530 uncoated cermet grade and a finely honed edge produces low cutting forces and significantly improved surface quality in finishing operations on steel. Cermet materials offer a higher hardness and heat resistance than conventional grades, which translates into consistent performance during continuous cuts and when taking small depths of cut. The result is a reduction in rework and less finishing time per component, helping to maintain steady production flow and predictable part quality. Reliable fit and secure clamping for predictable process stability Built to the ISO DCGT form, the insert fits holders that match by form, relief angle, tolerance class, attachment method, size and thickness. The rhombic geometry (11 mm inscribed circle) combined with the 7° relief angle and a 0.2 mm corner radius supports stable contact with the toolholder and predictable chip flow. The insert is supplied with a central cylindrical hole and a one‑sided countersink (40°–60°) for screw clamping, enabling secure fixation in compatible external holders or drill bars and simplifying indexation during tool changes. Material characteristics and intended application for consistent finishing This grade is specified as an uncoated cermet (NS9530) optimised as a finishing grade for steel: it provides a sharp cutting edge and low cutting forces that favour fine surface integrity and dimensional accuracy. The insert thickness of 3.97 mm and the small corner radius make it particularly suitable for continuous finishing passes and small feed applications. While excellent for steel finishing, selection of chipbreaker and grade should match workpiece material, machining strategy and machine rigidity for best outcomes. Contact Metav Werkzeuge for tailored advice on using Tungaloy NS9530 finishing inserts; specialists are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to support holder compatibility and cutting data selection Technical data Article number: 6967196 SKU: 6967196-Tungaloy Manufacturer SKU: TUN6967196 Model series: ISO turning indexable inserts Application: Turning Grade: NS9530 (uncoated cermet) Material: Hartmetall Numbers / Core technical data Inscribed circle: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle / geometry reference: 55° Designs / Special features Shape: rhombic Chipbreaker: single-sided Hole: with cylindrical hole and one-sided countersink (40°–60°) Compatibility criteria: form, relief angle, tolerance class, attachment, size, thickness Typical system: ISO insert + compatible external holder or drill bar, clamp set and replacement screw FAQ What materials is this insert best suited for? The DCGT11T302 NS9530 insert is formulated as a finishing grade for steel; the uncoated NS9530 cermet provides a sharp edge and low cutting forces suited to continuous finishing cuts on steel. Will this insert fit standard DCGT holders? Yes, the insert follows the ISO DCGT form and size (11 mm inscribed circle) and requires a holder matching form, relief angle (7°), thickness (3.97 mm) and fastening style for secure clamping. Can the insert be used for interrupted cuts or roughing? The NS9530 finishing grade is optimised for continuous cuts and small depths of cut; for interrupted cuts or heavy roughing, a more robust grade and different chipbreaker are recommended. What does the hole and countersink specification mean for clamping? The insert is supplied with a cylindrical central hole and a one‑sided countersink (40°–60°), which enables screw clamping in compatible holders and supports secure fixation and repeatable indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 NS9530 Wendeplatten - Tungaloy
DCGT 11T302 NS9530 Wendeplatte Drehen von Tungaloy Die DCGT11T302 NS9530 Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für präzise Schlichtbearbeitung beim Drehen von Stahl und ähnlichen Werkstoffen DCGT »11T302« Rhombische Platte, 11 mm Feiner Eckenradius 0,2 mm für hohe Oberflächengüte Unbeschichtetes Cermet NS9530 für feine Schneidkante Mit Loch und zylindrischer Senkung 40°–60° Freiwinkel 7° und Plattendicke 3,97 mm für stabile Schnitte Präzision und Oberflächengüte bei Schlichtbearbeitung Die NS9530 Sorte basiert auf unbeschichtetem Cermet und liefert eine sehr scharfe Schneidkante, die speziell für Schlichtoperationen bei Stahl entwickelt wurde. Durch den feinen Eckenradius 0,2 mm reduzieren sich Schnittkräfte, sodass sich kontinuierliche Schnitte mit kleinen Zustellungen wirtschaftlich ausführen lassen. Anwender profitieren von verbesserter Oberflächengüte und gleichmäßiger Werkstückqualität, was Nachbearbeitungszeiten minimiert und den Fertigungsfluss stabilisiert. Wirtschaftlichkeit und Prozesssicherheit im Werkstattalltag Die Kombination aus robustem Hartmetall-Träger und der NS9530-Schlichtsorte sorgt für verlässliche Standzeiten bei anspruchsvollen Feinbearbeitungen. Durch die ISO-Normung ist die Platte mit gängigen Außenhaltern kompatibel; die entscheidenden Merkmale sind Form, Freiwinkel 7°, Toleranzklasse, Befestigung, Größe und Dicke. Diese klare Systemorientierung erleichtert die Ersatzteilverwaltung und reduziert Stillstandszeiten in der Produktion. Zielgruppe und typische Einsatzfälle Ideal für Präzisionswerkstätten, Serienfertiger und Lohnbearbeiter, die hohe Oberflächenanforderungen erfüllen müssen. Die Wendeplatte ist für Außen- und Innendrehen geeignet; Spanformer und Sorte sollten entsprechend Werkstoff und Stabilität gewählt werden. Insbesondere bei kontinuierlichem Schnitt und kleinen Schnitttiefen zeigt die Platte ihre Stärken und bietet eine zuverlässige Lösung für hochwertige Schlichtbearbeitung. Auswahlhilfe und Systemaufbau für sichere Anwendung Das Gesamtpaket besteht aus ISO-Drehplatte, passendem Außenhalter oder Bohrstange, Unterlage/Klemmsatz und den passenden Ersatzschrauben. Bei der Auswahl ist auf den passenden Spanbrecher zu achten; hier ist ein einseitiger Spanbrecher angegeben. Wer den Einsatzbereich erweitern möchte, sollte Schnitttiefe und Vorschub genau abstimmen, um die scharfe Schneidkante zu schonen und die Standzeit zu maximieren. Empfehlung: Für präzise Schlichtbearbeitung die DCGT11T302 NS9530 Wendeplatte von Tungaloy über Metav Werkzeuge anfragen – eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6722880 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DCGT11T302 Hersteller SKU: TUN6722880 Daten Eckenradius: 0,2 mm Freiwinkel: 7° Plattendicke: 3,97 mm Plattengröße: 11 mm Winkel: 55° Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 — Schlichtsorte für Stahl, scharfe Schneidkante, niedrige Schnittkräfte, hohe Oberflächengüte Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: Rhombisch Spanbrecher: einseitig Anwendung: Drehen; Außen- und Innendrehen FAQ Was zeichnet die NS9530-Sorte bei der DCGT11T302 aus? Die NS9530-Sorte der DCGT11T302 Wendeplatte von Tungaloy ist ein unbeschichtetes Cermet mit sehr scharfer Schneidkante, ausgelegt für Schlichtoperationen bei Stahl und sorgt für niedrige Schnittkräfte sowie sehr gute Oberflächengüte. Für welche Vorschub- und Schnitttiefen ist die DCGT11T302 besonders geeignet? Die DCGT11T302 Wendeplatte ist für kleine Zustellungen und kontinuierlichen Schnitt optimiert; genaue Werte hängen von Werkstückaufspannung und Halterstabilität ab, typischerweise in feineren Schlichtbereichen. Ist die DCGT11T302 mit Standard-Außenhaltern kompatibel? Ja, die DCGT11T302 ist ISO-genormt; die Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters bestimmt. Welchen Vorteil bietet der Eckenradius 0,2 mm? Der Eckenradius 0,2 mm der DCGT11T302 reduziert Schnittkräfte und verbessert die Oberflächengüte, wodurch Nachbearbeitungen seltener erforderlich sind. Welche Werkstoffe lassen sich mit der DCGT11T302 bearbeiten? Primär ist die DCGT11T302 für Stahl ausgelegt; durch passende Spanformer und Schnittparameter kann die Platte in verwandten Anwendungsfällen effizient eingesetzt werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT 11T302 NS9530 Wendeplatten - Tungaloy
The combination of a sharp uncoated cermet NS9530 grade, low cutting forces and a precise 0.2 mm corner radius makes this insert ideal for high-quality finishing of steel components; it offers consistent surface finish and economical productivity in continuous turning operations. Order the DCGT11T302 NS9530 turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT11T302 NS9530 ISO turning insert for finishing — Tungaloy The DCGT11T302 NS9530 is a rhombic ISO turning insert engineered for fine finishing of steel, featuring a sharp cutting edge and a low-friction uncoated cermet grade for continuous cuts. Rhombic 55° geometry for versatile turning Uncoated cermet NS9530 for fine finishes Sharp edge reduces cutting forces Cylindrical hole with 40°–60° countersink Improve cycle efficiency with a finishing-grade cermet This insert is designed as a finishing grade for turning operations where dimensional control and surface integrity matter. The uncoated cermet NS9530 provides a sharp, wear-resistant cutting edge that reduces cutting forces and heat generation, which in turn helps maintain machining stability during continuous cuts. The result is a measurable reduction in rework and improved throughput when finishing steel components. Because the geometry yields lower cutting resistance, tool life tends to be more predictable under stable process parameters. Achieve consistent surface quality and dimensional fidelity With a 0.2 mm corner radius and a 55° rhombic geometry, the cutting edge promotes a superior surface finish and repeatable part tolerances in fine-turning applications. The 7° clearance angle assists chip flow and minimises rubbing, so cutting action remains clean even at small depths of cut. For users with limited metrology expertise, the combination of these features means fewer trial-and-error adjustments and faster achievement of target Ra values on turned surfaces. Clear compatibility rules and holder considerations The insert conforms to ISO dimensions and mounts in standard DCGT-compatible holders; compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness. The plate thickness of 3.97 mm and the 11 mm inscribed circle must match the chosen clamp or screw system. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure fastening and repeatable seating, which is essential for maintaining positional accuracy in production fixtures. Recommended applications and material guidance This grade is tailored for turning operations on steel where low cutting forces and high surface quality are priorities—especially continuous cutting with small depths of cut. The single-sided chipbreaker design supports controlled chip formation for uninterrupted runs. For best results select cutting parameters that favour finishing regimes: moderate feedrates, reduced depths of cut and stable speeds. Where multiple passes are required, the insert’s geometry and grade help preserve edge integrity across successive operations. For tailored advice on specifying Tungaloy finishing inserts or to confirm suitability for a particular turning application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on optimised grades and holder matching. Technical data Article number: 6997928 Manufacturer SKU: TUN6997928 Model series: ISO turning inserts ISO designation: DCGT11T302 Brand: Tungaloy Facts Inscribed circle: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle/geometry: 55° Hole: with cylindrical hole + single-sided countersink (40°–60°) Special features Grade: uncoated cermet NS9530 Chipbreaker: single-sided Plate form: rhombic Application: finishing turning on steel Typical system: ISO insert + suitable external holder, shim/clamp set and replacement screws FAQ What materials is this insert best suited for? This insert is optimised for turning steel in finishing operations; the NS9530 cermet grade promotes low cutting forces and fine surface finish when machining steel components. Can the DCGT11T302 NS9530 be used for roughing operations? The DCGT11T302 NS9530 is a finishing-grade insert and is intended for continuous light cuts and small depths of cut; for heavy roughing, a tougher, coated grade would be more appropriate. How does the 0.2 mm corner radius affect machining results? The 0.2 mm corner radius balances edge strength and surface finish, helping to produce smooth profiles while maintaining adequate edge life in finishing passes. Is a specific holder required for ISO DCGT inserts? Compatibility requires a DCGT-compatible holder that matches the insert’s geometry, 7° clearance, thickness and fixing arrangement; the cylindrical hole with countersink ensures reliable seating in standard clamping systems. Does the uncoated cermet require special cutting parameters? Uncoated cermet grades like NS9530 perform best with finishing parameters: moderate spindle speeds, reduced feed and shallow depths of cut to exploit the sharp edge and achieve optimal surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing and low cutting forces offered by the NS9530 grade and the ISO rhombic geometry for efficient turning operations; order directly via Metav Werkzeuge or consult our specialists for application-specific selection. DCGT 11T302 NS9530 Turning Insert — DCGT11T302, uncoated cermet, 7° clearance by Tungaloy DCGT11T302 NS9530 is a precision ISO turning insert designed for finishing steel in continuous-cut operations, compatible with standard ISO holders when matching form, size and clamping. Uncoated cermet for high-quality finishing Sharp cutting edge for low cutting forces ISO rhombic shape with 55° included angle Cylindrical hole with 40°–60° countersink High-precision finishing with a low-force cutting edge The insert is supplied in the NS9530 grade, an uncoated cermet developed for fine finishing on steel. The material combination yields a sharp cutting edge and reduced built-up edge, which leads to lower cutting forces and a consistently improved surface finish in continuous, light-cut turning operations. For shops aiming to increase first-pass quality while reducing rework, this geometry and grade support shorter cycle times and predictable results. The product name DCGT11T302 appears on most technical drawings and order references for clear identification. Predictable mounting and geometry for stable machining The ISO rhombic format with a 55° included angle and 7° clearance ensures stable engagement and repeatable tool positioning when matched to an appropriate external holder or boring bar. The 0.2 mm corner radius balances edge strength with the fine finish expected from a finishing grade, while the 11 mm size and 3.97 mm thickness provide a compact yet rigid platform. The insert’s cylindrical hole with a single-sided countersink (40°–60°) facilitates secure clamping and straightforward replacement, reducing downtime associated with indexable tooling changes and maintaining consistent cutting geometry across tool life. Application guidance and process benefits Designed primarily for turning and specifically for finish passes on steel, the single-sided chipbreaker and cermet composition favour continuous cuts and small depths of cut. This results in excellent surface integrity and minimises the need for secondary polishing. In production environments where surface finish and component conformity are critical, the combination of a dedicated finishing grade and robust ISO compatibility translates into improved process reliability and repeatable part quality. When selecting a holder, ensure form, rake clearance, tolerance class, fastening method, size and thickness match the insert to maintain the advertised performance. For tailored selection advice or to purchase genuine Tungaloy DCGT11T302 NS9530 turning inserts, contact Metav Werkzeuge for expert consultation and prompt supply — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6997927-Tungaloy Manufacturer SKU: TUN6997927 Manufacturer article number: 6997927 Model series: ISO turning inserts Application: Turning Data Size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Materials & features Grade: NS9530 Substrate: uncoated cermet Shape: rhombic (DCGT) Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Typical use: finishing on steel, continuous cuts FAQ What materials is this insert best suited for? The DCGT11T302 NS9530 Tungaloy turning insert is optimised for finishing operations on steel, where the uncoated cermet grade provides a sharp edge and high surface quality. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius provides a balance between edge strength and fine surface finish; with the NS9530 grade, this radius supports controlled chip formation and consistent results in finish passes. Which holder features must be matched to this ISO insert? Compatibility requires matching form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic shape and 55° included angle must be supported by the chosen external holder or boring bar. Is this insert suitable for interrupted cuts? The grade and geometry are optimised for continuous cutting and small depths of cut; interrupted cuts may reduce tool life and are not the primary application for this finishing insert. What fastening detail does the insert have for mounting? The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure secure clamping in compatible ISO clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of consistent edge life and straightforward system compatibility for reliable turning performance; the robust SH7025 coating and precise 0.2 mm corner radius support stable productivity. Order directly via Metav Werkzeuge or consult their experts for holder matching and machining parameters. DCGT 11T302 SH7025 – ISO rhombic turning insert, 55° by Tungaloy The DCGT11T302 SH7025 is an ISO-standard rhombic turning insert designed for external and internal turning, providing durable cutting-edge performance in variable engagement conditions. ISO rhombic insert, 55° cutting angle SH7025 coated carbide for edge stability 0.2 mm corner radius for precise finishing Cylindrical hole with 40°–60° countersink Improved productivity through stable edge performance The SH7025 grade is a coated carbide designed for good edge stability under changing cut conditions, making it particularly effective in smaller tool setups where forces vary. With a defined 0.2 mm corner radius the geometry supports controlled chip formation and repeatable surface quality, reducing rework and machine idle time. The combination of the coating and substrate focuses on wear resistance and consistent tool life, which translates into predictable tool-change intervals and efficient batch processing. Clear compatibility and secure clamping for safe operation Designed as an ISO insert with a rhombic form and a 55° cutting angle, the insert’s fit is governed by form, relief angle and tolerance class. The 7° relief and 3.97 mm plate thickness ensure a reliable seat in compatible holders, while the cylindrical hole with single-sided countersink (40°–60°) secures stable mounting. These measurable attributes simplify holder selection and reduce setup variability, improving reproducibility across shifts and workstations. Practical machining guidance for turning tasks The single-sided chipbreaker is engineered for controlled chip flow in general turning applications; select a matching chipbreaker and grade when dealing with different steels or harder materials. For fine finishing, the small corner radius supports improved surface quality; for heavier cuts, consider a stiffer holder and appropriate negative rake geometry to preserve tool life. The insert’s design focuses on turning operations and supports both external and internal procedures when paired with a suitable outer holder or boring bar. System considerations and inventory efficiency This insert belongs to an ISO series that works as part of a system: the insert, a matched external holder or boring bar, a clamping pack and spare screws. Keeping compatible ISO holders and a small stock of inserts like this reduces downtime and simplifies logistics. If tool life needs extending, review cutting data sheet recommendations for speeds and feeds and match coolant and chip evacuation strategies to the material and depth of cut. Contact Metav Werkzeuge for tailored holder recommendations and technical advice on the Tungaloy SH7025 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tool selection and delivery options Technical data Article number: 7743499 SKU: 7743499-Tungaloy Manufacturer SKU: TUN7743499 Facts Size: 11 Thickness: 3.97 mm Cutting angle: 55° Relief angle: 7° Corner radius: 0.2 mm Special features Coated carbide grade SH7025 Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker ISO-standard turning insert Designed for external and internal turning Model series: ISO turning inserts Typical system: insert + holder + clamping set + spare screws FAQ What materials is this insert suitable for? The DCGT11T302 SH7025 Tungaloy turning insert is intended for general turning operations; the SH7025 coated carbide offers good edge stability across a broad range of steels and mixed engagement conditions. How is the insert mounted in a holder? Mounting requires a compatible ISO rhombic holder that matches the insert form, 7° relief and the tolerance class; the cylindrical hole with countersink secures the insert with the correct clamping screw. What does the 0.2 mm radius mean for surface finish? A 0.2 mm corner radius supports finer surface finishes and controlled chip formation; for roughing choose larger radii and heavier engagement where applicable. Is this insert suitable for internal boring as well as external turning? Yes, the insert is designed for both external and internal turning when used with a suitable boring bar or internal holder that accepts the ISO rhombic format. Which chipbreaker should be chosen for aluminium or stainless applications? Select a chipbreaker matched to the workpiece material and stability: the one-sided chipbreaker fitted to this insert favours controlled chip flow—review machining guidelines or consult Metav Werkzeuge for an application-specific recommendation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH7025 for a stable cutting edge, a compact rhombic 11 geometry and a fine 0.2 mm corner radius to achieve consistent surface quality and reliable tool life in turning operations; order directly via Metav Werkzeuge or consult the specialists for application advice. DCGT11T302 SH7025 Tungaloy turning insert — coated carbide, 0.2 mm radius DCGT11T302 SH7025 is an ISO‑standard indexable insert engineered for precision external and internal turning, offering robust edge stability in variable engagement conditions. Coated carbide grade SH7025 for stable cutting Rhombic 11 geometry, 55° included angle 0.2 mm corner radius for fine surface finishes Cylindrical hole with single-sided countersink 40°–60° Consistent cutting performance with a wear‑resistant grade The combination of a coated carbide substrate and the SH7025 grade delivers a balance of toughness and wear resistance that favours stable cutting under variable conditions. This characteristic reduces the frequency of edge changes and supports predictable machining cycles, which in turn improves productivity. The insert’s design emphasises a stable cutting edge, making it suitable where small tools or changing depths of cut require a resilient insert that resists chipping and premature wear. Improved chip control and surface quality through geometry A single‑sided chipbreaker matched to the insert form promotes controlled chip formation and evacuation, reducing the likelihood of chip entanglement and mating‑surface damage. The 0.2 mm corner radius provides a compromise between strength and finish: sufficient edge robustness for interrupted cuts while enabling improved surface finish compared with larger radii. For medium to light turning tasks, this geometry supports consistent part quality and fewer rework steps, contributing to lower overall production costs. Straightforward integration into ISO tool systems As a member of the ISO‑normed insert family, the DCGT11T302 integrates with a broad range of holders and toolposts when the holder’s form, 7° clearance, tolerance class, clamping method, size and thickness match the insert. The rhombic‑shaped insert with a 55° included angle suits both external and internal turning where access or approach angles favour such geometry. The central cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping and simple replacement during tool changes, reducing machine downtime. Practical selection and application guidance for reliable results Select the insert and chipbreaker combination according to workpiece material, stability of the setup and the desired surface finish. The grade performs well where variable engagement occurs and is especially useful in smaller tooling assemblies. When pairing with a holder, confirm compatibility by matching the insert size and thickness, and verify that the clamping set and screw are appropriate for the specified hole style. Regular inspection of the edge and adherence to recommended cutting parameters will extend tool life and secure consistent machining outcomes with this Tungaloy solution. Contact Metav Werkzeuge for a tailored recommendation on the Tungaloy DCGT11T302 SH7025 insert and to arrange supply or batch orders through Metav Werkzeuge. Technical data Article number: 6967462 Manufacturer SKU: TUN6967462 SKU: 6967462-Tungaloy Manufacturer: Tungaloy Facts Geometry size: 11 Included angle: 55° Corner radius: 0.2 mm Plate thickness: 3.97 mm Clearance angle: 7° Hole: with hole Special features Rhombic plate form Coated carbide grade SH7025 Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) ISO turning indexable insert, suitable for external and internal turning Material: carbide FAQ What materials is this insert suitable for? The DCGT11T302 SH7025 insert is formulated for a broad range of turning tasks; the SH7025 coated carbide grade provides toughness for varied materials and changing engagement conditions. How does the 0.2 mm corner radius affect finish and tool life? A 0.2 mm radius offers improved surface finish while maintaining sufficient edge strength; using the DCGT11T302 SH7025 with appropriate cutting parameters balances finish quality and tool longevity. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO norms; compatibility depends on matching the holder’s form, 7° clearance, tolerance class, clamping style, size and thickness to the insert specifications. What benefit does the single‑sided chipbreaker provide? The single‑sided chipbreaker promotes predictable chip formation and evacuation, reducing downtime caused by chip issues and improving surface integrity when using the DCGT11T302 SH7025. How should the hole and countersink be clamped? Use a clamping system designed for a cylindrical hole with a single‑side countersink (40°–60°) to ensure stable seating and secure retention of the insert in the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of consistent chip control, durable SH7025 coating and precise geometry for reliable turning performance; order the inserts directly via Metav Werkzeuge or consult the technical team for matching holder recommendations. DCGT11T302 SH7025 ISO turning insert — Tungaloy The DCGT11T302 SH7025 is an ISO-standard turning insert designed for external and internal turning, offering a tough coated-carbide grade and a single-sided chipbreaker for controlled chip formation. Coated carbide grade SH7025 Rhombic DCGT form with 55° cutting angle Single-sided chipbreaker for consistent chips Cylindrical hole with 40°–60° countersink Increased productivity through a robust coated-carbide grade The SH7025 grade is a coated carbide developed for toughness and stable cutting edges, especially beneficial in smaller tools or under varying engagement conditions. With this insert, tool life is made more predictable and changeover frequency is reduced, supporting a smoother production flow. The coating and substrate combination is focused on maintaining cutting performance where interruptions or variable loads occur, translating directly into lower downtime and higher throughput. Clear geometry for predictable cutting behaviour The rhombic DCGT geometry with a 55° cutting angle, 0.2 mm corner radius and 7° relief angle provides a balanced compromise between strength and sharpness. A thickness of 3.97 mm and size 11 ensure compatibility with standard ISO clamping systems; the cylindrical hole with a 40°–60° countersink enables secure fastening with single-screw systems. The single-sided chipbreaker shapes chips for safer evacuation and reduced tendency to form long, tangled swarf, which simplifies handling and post-process cleaning. Versatile application and selection guidance for turning tasks This insert is intended for general turning tasks and is particularly suitable where small toolholders or variable cut conditions are common. For best results, pair the grade and chipbreaker style to the workpiece material and machining strategy; this supports consistent surface finish and repeatable tool life. The insert’s ISO conformity and clear dimensional data simplify holder selection and spare-part stocking, helping to standardise processes across workshops. For tailored advice on toolholder compatibility or to secure Tungaloy DCGT11T302 SH7025 inserts from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for availability and technical consultation Technical data Article number: 7743493 Manufacturer SKU: TUN7743493 SKU: 7743493-Tungaloy Name: DCGT11T302 SH7025 Tungaloy insert Core data Corner radius: 0.2 mm Cutting angle: 55° Relief angle: 7° Thickness: 3.97 mm Insert size: 11 Special features Coated carbide grade SH7025 Rhombic insert form (DCGT) Single-sided chipbreaker Cylindrical hole with 40°–60° countersink ISO-standard turning inserts Suitable for external and internal turning Compatible with matching holder, clamp and screw FAQ Which machining tasks is this insert designed for? The DCGT11T302 SH7025 insert is designed for external and internal turning operations, offering reliable performance in applications that require a balance of toughness and edge stability. How does the single-sided chipbreaker affect chip control? A single-sided chipbreaker on this insert shapes chips predictably, improving evacuation and reducing the risk of long, entangling swarf during turning operations. What do the geometric values mean for selection? The 55° cutting angle and 0.2 mm corner radius define the cutting engagement and edge strength, while the 7° relief angle and 3.97 mm thickness determine clamping and toolholder compatibility. How can compatibility with a toolholder be confirmed? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters to the holder specification ensures correct fit and secure clamping. Is this an original Tungaloy product and what is the SKU? Yes, the insert is an original Tungaloy product listed under SKU 7743493-Tungaloy (manufacturer article number 7743493). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of a coated carbide grade engineered for edge stability, a compact 0.2 mm corner radius for precision, and ISO conformity that simplifies holder selection; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. DCGT11T302 SH7025 — Tungaloy ISO turning indexable insert, rhombic form DCGT11T302 SH7025 is an ISO‑standard indexable insert for turning, designed to offer reliable edge stability and adaptable performance in variable engagement conditions. ISO rhombic insert DCGT form 11T302 Coated carbide grade SH7025 for toughness 0.2 mm corner radius for precision Cylindrical hole with one‑sided countersink Consistent cutting performance for variable engagements The coated carbide composition in combination with the SH7025 grade provides a balance of toughness and cutting‑edge stability that is particularly useful when engagement conditions change or when using smaller tooling. This formulation supports stable chip formation and reduces the risk of premature edge chipping, which in turn helps maintain dimensional accuracy during external and internal turning operations. The design aims to extend effective tool life under interrupted cuts and shifting feed conditions. Precise geometry that simplifies process setup With a 0.2 mm corner radius and rhombic geometry, the insert is suited to fine finishing and light to medium roughing where edge integrity and repeatable form are required. The ISO 11T302 designation standardises form and size, aiding compatibility checks with matching holders and reducing setup time. Clear geometric data allow process engineers to predict the effect of the insert on surface finish and cutting forces, making it straightforward to integrate into established turning cycles. Secure clamping and versatile mounting features The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to match common screw‑fastening arrangements. This mounting style ensures a firm seat in the pocket, supporting repeatable positional accuracy and straightforward replacement. Compatibility to a particular holder is determined by form, relief angle, tolerance class, fixing method, size and thickness, so correct matching of the insert form and the clamping system is essential for optimal performance. Application focus and recommended use Specifically developed for turning, this insert features a single‑sided chipbreaker and a compact plate thickness of 3.97 mm, making it a practical choice for operations where tool stability and surface quality are priorities. The combination of a robust coating and the SH7025 substrate is aimed at users seeking dependable results across a range of turning tasks, especially where small‑scale tooling or variable cuts are present. What the geometry delivers in practice The 55° approach angle and 7° clearance contribute to controlled cutting forces and predictable chip flow, which can help reduce vibration and improve surface finish on components. These geometric choices support process reliability and are particularly beneficial where consistency between repetitive parts is required, thereby enhancing throughput without sacrificing quality. For application advice or to request supply of Tungaloy DCGT11T302 SH7025 inserts, contact Metav Werkzeuge; technical queries and orders can be directed to Metav Werkzeuge via eMail: info@metav-werkzeuge.com or by phone: +49 2822 7131930 Technical Data Article number: 6967481 Manufacturer SKU: TUN6967481 SKU: 6967481-Tungaloy Model series: ISO turning indexable inserts Material: coated carbide (SH7025) Numbers / Core technical data Thickness: 3.97 mm Size (inscribed circle): 11 mm Corner radius: 0.2 mm Clearance angle: 7° Approach angle: 55° Special features ISO designation: DCGT11T302 Rhombic form with cylindrical hole and one‑sided countersink (40°–60°) Single‑sided chipbreaker Compatibility depends on holder form, relief angle, tolerance class, fixing, size and thickness FAQ What tasks is this insert designed for? The DCGT11T302 SH7025 insert is designed for turning operations, covering both external and internal turning where stable cutting edges and variable engagement handling are required. How does the SH7025 grade affect performance? SH7025 is a tough, edge‑stable coated carbide intended to improve durability during interrupted cuts and changing engagement, offering reliable performance in smaller tool setups. How to check compatibility with a holder? Compatibility is determined by matching form, clearance (relief) angle, tolerance class, fixing method, size and thickness; the ISO 11T302 designation helps ensure correct pairing with standard holders. What fastening arrangement does the insert use? The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°), suitable for screw clamping systems that provide secure seating and repeatable positioning. What benefit does the 0.2 mm corner radius provide? A 0.2 mm corner radius reduces stress concentrations and supports finer surface finishes while maintaining sufficient edge strength for light to medium cutting demands. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T302 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of the SH7025 high‑toughness grade, the precise DCGT11T302 geometry and the 0.2 mm corner radius to keep turning operations steady under variable engagement; order the insert directly via Metav Werkzeuge or consult our specialists for application support. DCGT 11T302 SH7025 indexable insert for turning — Tungaloy DCGT11T302 SH7025 Tungaloy indexable insert designed for ISO‑format external and internal turning with a rhombic 55° geometry and a single‑sided chipbreaker SH7025 high‑toughness coated grade ISO DCGT 11T302 rhombic insert 0.2 mm corner radius for fine profiles Cylindrical hole with 40°–60° countersink Consistent cut quality where engagement varies The SH7025 grade is a coated carbide engineered for toughness and edge stability, delivering more predictable wear behaviour when feed or depth of cut changes. As an ISO‑format turning insert the DCGT11T302 offers a rhombic cutting geometry that maintains contact stability during interrupted cuts and variable chip loads. This results in fewer edge‑related surprises and a steadier surface finish, especially when smaller tool sizes are required or when shop conditions change frequently. Secure mounting and ISO compatibility minimise setup risk Compatibility with holders is determined by form, relief angle, tolerance class, fastening and plate thickness. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) that supports reliable clamping and repeatable seating in standard external holders and boring bars. With a relief angle of 7° and a nominal lead/approach geometry of 55°, the geometry reduces rubbing and helps to preserve the cutting edge, which simplifies tool selection and lowers the chance of incorrect fitting. Geometry and micro‑features for precision profiling A 0.2 mm corner radius is suitable for fine profile work and controlled edge strength; it balances the need for sharp detail against the requirement for edge robustness. The plate thickness of 3.97 mm contributes to a stable cutting platform and supports effective heat distribution during turning. The single‑sided chipbreaker is tailored to produce manageable chips under a range of cutting conditions, enabling consistent evacuation and helping to protect tool life and component surface quality. Practical application advice for production use Intended for turning operations, this insert is best deployed where a tough grade and stable cutting edge are priorities — for example, where variable engagement or frequent tool changes occur. Choose the chipbreaker and grade in line with the workpiece material and machining strategy; the combination of a coated carbide substrate and the SH7025 specification typically favours interrupted cuts and situations demanding repeatable edge performance. For process optimisation, pair the insert with a suitable ISO‑compatible holder and check seating tolerances before ramping up feed and speed. Contact Metav Werkzeuge for tailored cutting data and availability of Tungaloy turning inserts: info@metav-werkzeuge.com or call +49 2822 7131930 for expert, application‑focused assistance Technical Data Article number: 6967483 SKU: 6967483-Tungaloy Manufacturer SKU: TUN6967483 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Cemented carbide Core Data Insert designation: DCGT11T302 ISO code: 11T302 Grade / coating: SH7025 Corner radius: 0.2 mm Plate thickness: 3.97 mm Plate size: 11 mm Relief angle: 7° Geometry angle: 55° Special features Rhombic plate form Single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) ISO‑standard turning insert Suited for external and internal turning FAQ What materials is this insert best suited for? The DCGT11T302 SH7025 indexable insert is specified for turning tasks where a tough, edge‑stable coated carbide is beneficial; select the chipbreaker and cutting data to match the actual workpiece material and machining conditions. How does the single‑sided chipbreaker affect performance? A single‑sided chipbreaker on the DCGT11T302 SH7025 insert promotes consistent chip control under varying engagement and aids in predictable tool life and surface finish when used with the correct holder and feeds. Which holders are compatible with the DCGT11T302 geometry? Compatibility is achieved with ISO‑format external holders or boring bars that match the DCGT form, the 7° relief, the tolerance class and the insert fastening arrangement; check the holder specification for the matching hole and seating geometry. Can the 0.2 mm corner radius handle light profiling? Yes, the 0.2 mm corner radius provides a balance between fine profile detail and edge strength, making the insert suitable for fine profiling while still offering improved resistance to edge chipping. What should be checked during indexable insert installation? Ensure correct seating with the cylindrical hole and countersink aligned, verify holder tolerance and clamping torque, and confirm that the selected grade and chipbreaker correspond to the intended turning operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of stable cutting-edge performance, ISO-standard compatibility and a grade tailored for variable engagement conditions to keep turning operations productive and predictable. Order directly via Metav Werkzeuge or consult the specialists for grade and holder matching. DCGT 11T302 SH725 indexable turning insert by Tungaloy – ISO turning application A DCGT11T302 SH725 indexable insert for ISO turning, designed for external and internal turning with a rhombic 55° geometry and a 0.2 mm corner radius. DCGT 11T302 geometry for ISO turning SH725 coated carbide for stable cutting edges 0.2 mm corner radius for precision finishes Cylindrical hole with 40°–60° countersink Reliable performance under changing engagement conditions The coated carbide composition and the SH725 grade provide a balance of toughness and edge stability that is particularly useful where cutting conditions vary or when using smaller tools. The coating and carbide substrate reduce premature wear and help maintain a consistent cutting edge, which in turn extends tool life and reduces unplanned changeovers. As an ISO-standard insert, the item fits a wide range of holders; compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness, which are all standardised to enable straightforward replacement and inventory management. Geometry engineered for quality surface finishes and secure clamping The rhombic shape with a 55° included angle and the small 0.2 mm corner radius are intended to produce fine surface quality on external and internal turning operations while controlling cutting forces. The insert’s single-sided chipbreaker helps form short chips that evacuate reliably, reducing the risk of re-cutting and improving process stability. The central cylindrical hole with a 40°–60° single-sided countersink ensures positive, repeatable clamping in compatible ISO-style seats, supporting consistent alignment and minimising runout for better repeatability. Economical system solution for production and job shops As part of a standard turning system — insert, compatible external holder or boring bar, shim/clamp set and replacement screws — this grade supports efficient tool management and fast changeovers. The modest thickness and compact size are well suited to light to medium-duty turning, allowing pragmatic tooling choices where tool overhang and rigidity are limiting factors. Selecting the appropriate chipbreaker and SH725 grade for the workpiece material will deliver a cost-effective balance between tool life and component quality, reducing total machining costs through fewer interruptions and steady cycle times. Contact Metav Werkzeuge for precise selection advice on Tungaloy inserts or request a recommendation for holders that match the DCGT 11T302 SH725 for your turning application Technical Data Article number: 6737017 Manufacturer SKU: TUN6737017 Label: DCGT11T302 SH725 Tungaloy-indexable insert Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Corner radius: 0.2 mm Relief angle: 7° Insert size: 11 mm Thickness: 3.97 mm Geometry angle: 55° Special features Coated carbide grade SH725 Single-sided chipbreaker Rhombic insert shape With hole: cylindrical hole + single-sided countersink (40°–60°) Suitable for external and internal turning ISO-standardised compatibility (form, relief angle, tolerance, fastening, size, thickness) FAQ What materials is this insert suitable for? The DCGT11T302 SH725 insert is a coated carbide grade designed for versatile turning; the SH725 grade is formulated for toughness and edge stability, so selection should match the workpiece material and machining conditions. How is the insert clamped in the holder? Clamping uses the central cylindrical hole with a single-sided countersink (40°–60°) to engage standard ISO seats; the DCGT11T302 insert is secured with the corresponding clamp and screw system. What advantage does the 0.2 mm corner radius provide? A 0.2 mm corner radius reduces cutting stress concentration and improves surface finish on medium to light turning passes, while still allowing good edge strength for interrupted cuts. Does the insert fit any ISO holder? The insert follows ISO geometry for DCGT 11T302; compatibility with a holder depends on matching the form, clearance angle, tolerance class, fastening method, size and thickness to the holder’s seat. What is the effect of the single-sided chipbreaker? The single-sided chipbreaker is designed to form shorter chips under typical turning feeds, improving chip control and reducing the chance of chips interfering with the workpiece or tool. Is this insert suitable for small-tool setups? Yes, the SH725 grade and the insert’s dimensions make it suitable for smaller tools or applications where cutting conditions change, offering a compromise between tool life and adaptability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of consistent edge life, broad material capability and ISO compatibility for efficient turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCGT 11T302 SH725 — Turning indexable insert by Tungaloy (rhombic, 55° included angle) DCGT11T302 SH725 Tungaloy turning indexable insert offers a robust carbide grade for varied turning tasks, suited to both external and internal operations. ISO turning insert DCGT geometry Grade SH725: tough, edge-stable Rhombic form, 11 mm size Cylindrical hole with 40°–60° countersink Consistent cutting performance for mixed materials The SH725 grade is a coated carbide formulation engineered for edge stability and reliable wear behaviour during intermittent or light-contour turning. As a result, the insert delivers repeatable tool life across changing engagement conditions and smaller toolholders. The single-sided chipbreaker design helps control chip formation and evacuation, reducing rework and minimising cycle-time variance. Benefits include lower tool change frequency and more predictable part tolerances when machining a range of steels and general engineering alloys. Precision fit and secure clamping for steady machining Compatibility with holders depends on geometry parameters such as form, 7° clearance, tolerance class, fastening and plate thickness. The rhombic plate with an 11 size and a 55° included angle provides a balance between strength and accessibility for shoulder and profile turning. The cylindrical hole with a 40°–60° countersink ensures consistent seating and torque distribution when clamped, contributing to vibration reduction and improved surface finish. Clear, ISO-based geometry simplifies holder selection and reduces setup uncertainty in the workshop. Practical selection and process advantages Selecting the correct chipbreaker and grade for the application leads to measurable process improvements: fewer interruptions, higher material removal rates and improved surface integrity. The insert is designed as part of an ISO system comprising the indexable plate, matching external holder or boring bar, shim/seat and clamping set plus replacement screws, enabling rapid replacement and straightforward inventory management. For complex component programmes, the technical attributes translate into predictable throughput and lower overall machining cost per part. Contact Metav Werkzeuge for tailored advice on clamping and grade selection — call +49 2822 7131930 or email info@metav-werkzeuge.com for application-specific support and procurement assistance Technical data Article number: 6737246 Manufacturer SKU: TUN6737246 SKU: 6737246-Tungaloy Plate designation: DCGT11T302 Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: SH725 Application: turning Facts Included angle: 55° Clearance angle: 7° Plate thickness: 3.97 mm Corner radius: 0.2 mm Plate size: 11 Special features Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Coated carbide grade SH725 ISO-standardised insert, compatible with matching holders and clamping sets FAQ What materials is this insert suited for? The SH725-coated carbide insert is formulated for a broad material range; the DCGT11T302 insert performs well on steels and common engineering alloys in turning operations. How does the plate geometry affect holder choice? Holder compatibility is governed by the rhombic form, the 7° clearance, the plate size and thickness; matching these parameters ensures secure clamping and optimal cutting conditions for the insert. Is the insert reversible or indexable? This is an indexable turning insert with a single-sided chipbreaker; when a cutting edge wears, the plate can be indexed or replaced within an ISO tool system. What fastening and seating features are provided? The plate has a cylindrical hole with a one-sided countersink (40°–60°) for consistent seating and clamping torque distribution in compatible holders. Can this insert be used for internal boring as well as external turning? Yes, the insert is suitable for both external and internal turning applications when combined with an appropriate external holder or boring bar and correct process parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725, precise 55° geometry and a compact 0.2 mm corner radius for consistent, productive turning operations; order directly via Metav Werkzeuge or request technical advice from the consultants. DCGT 11T302 SH725 ISO turning insert for turning — Tungaloy The DCGT11T302 SH725 is an ISO rhombic turning insert designed for general external and internal turning, offering edge-stable cutting performance in compact tool arrangements. ISO rhombic insert DCGT11T302 SH725 Coated carbide grade SH725 for stable edges 55° geometry with 0.2 mm corner radius Cylindrical hole with single-side countersink Productive cutting with an edge-stable coated grade The use of a coated carbide grade like SH725 provides a balance between toughness and wear resistance, making it particularly suitable for turning where intermittent cuts or changing engagement conditions occur. The coating enhances thermal resistance and helps maintain a consistent cutting edge, which results in reliable chip control and fewer interruptions for index changes. In practical terms, this means improved cycle-time stability and reduced tool management overhead in mixed-production environments. Geometry engineered for accuracy and surface quality A 55° rhombic shape combined with a 0.2 mm corner radius and 7° relief angle delivers a compact cutting geometry that supports fine contouring and repeatable dimensional results. The modest corner radius reduces cutting forces while preserving the ability to achieve acceptable surface finish and tolerance control on turned profiles. The plate thickness of 3.97 mm contributes to adequate stiffness in small holders, reducing vibration and enhancing process consistency during finishing passes. ISO compatibility and system-level benefits for workshops As part of the ISO turning insert family, the DCGT11T302 SH725 fits into standard external holders and boring bars provided the form, clearance angle, tolerance class, fastening method, size and thickness match. The insert’s cylindrical hole with single-side countersink (40°–60°) supports secure clamping and straightforward indexability. Selecting the correct chipbreaker and grade for the workpiece material and machine rigidity leads to increased productivity and predictable tool-life performance with fewer unscheduled tool changes. The Tungaloy design philosophy behind this grade emphasises robust edge behaviour and broad usability across common turning tasks. For process-oriented turning solutions with Tungaloy’s SH725 grade, contact Metav Werkzeuge for ordering and application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — quoting SKU TUN6732557 will speed up assistance Technical data Article number: 6732557 Manufacturer SKU: TUN6732557 Label: DCGT11T302 SH725 Tungaloy-Wendeplatte Material: Carbide Model series: ISO-Drehwendeschneidplatten Core measurements Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Lead/approach angle: 55° Features ISO designation: DCGT11T302 / 11T302 Grade: SH725 (coated) Chipbreaker: one-sided Hole: with hole; cylindrical hole + single-side countersink (40°–60°) Application: Turning FAQ What materials is this insert designed for? The DCGT11T302 SH725 insert is a coated carbide grade developed for tough, edge-stable performance in turning; the SH725 grade is intended for applications where stable cutting edges and versatile behaviour are required. How is compatibility with holders ensured? Compatibility depends on ISO-related factors such as form, clearance angle, tolerance class, fastening method, size and thickness; the DCGT11T302 follows ISO standards so matching these parameters with the correct holder guarantees proper fit. Which chipbreaker does this insert have and when should it be chosen? This grade is supplied with a one-sided chipbreaker; the chipbreaker should be selected according to workpiece material, machining type and setup stability to ensure effective chip control and surface quality. Is this insert suitable for both external and internal turning? Yes, the ISO rhombic geometry and the grade’s characteristics make the DCGT11T302 SH725 suitable for both external and internal turning operations where a compact geometry and reliable edge stability are needed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of a hard‑wearing SH725 grade for stable cutting edges and the ISO‑compliant geometry for straightforward toolholder matching; this combination delivers consistent turning performance and simplified tool management. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCGT 11T302 SH725 Tungaloy turning insert — coated carbide, 55° rhombic for turning The DCGT11T302 SH725 Tungaloy insert is an ISO‑specified rhombic turning insert designed for external and internal turning; compatibility with toolholders depends on form, relief angle, tolerance class, fixation, size and thickness ISO‑normed rhombic insert, 55° included angle Coated carbide grade SH725 0.2 mm corner radius for fine finishing Cylindrical hole with one‑sided countersink Consistent edge stability for variable engagement The SH725 grade is a coated carbide designed for turning where edge robustness and resistance to chipping are paramount. This composition is especially suitable for smaller tools or processes with changing engagement conditions, as the material maintains a stable cutting edge under fluctuating chip loads. The practical benefit is a reduced frequency of insert changes and a more predictable tool life, which leads to higher uptime and lower process variation in production runs. ISO compatibility reduces setup time and uncertainty Built to the ISO model series for turning inserts, the DCGT11T302 geometry provides a standardised interface that eases selection and replacement. The rhombic shape with a 55° included angle and a 7° relief angle is matched to widely available holders; form, clearance and tolerances determine compatibility. Using ISO‑compliant inserts ensures that holders, underplates and clamping sets fit reliably, so machine set‑up is faster and tool inventory becomes easier to manage. Dimensional precision that supports surface quality Key dimensions are engineered for precision: an inscribed circle of 11 mm, a plate thickness of 3.97 mm, and a corner radius of 0.2 mm. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) and a single‑sided chipbreaker to control chip flow. These attributes translate into predictable cutting forces and a capability for finer surface finishes where small radii and thin cross‑sections are required, helping to reduce secondary operations and rework. Application guidance and selection logic The indexable plate is intended for both external and internal turning; selection of the chipbreaker and the SH725 grade should be aligned with workpiece material, machining type and machine/tool stability. For interrupted cuts or variable depths of cut, the tougher grade provides better resistance to edge damage. For long, continuous cuts where micro‑finish is critical, the small corner radius supports improved surface integrity. Where required, consult Metav Werkzeuge for recommendations on pairing the insert with suitable holders and clamping components. For precise advice on integrating Tungaloy turning inserts into production workflows, contact Metav Werkzeuge for technical consultation and availability via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6932704 Manufacturer SKU: TUN6932704 SKU: 6932704-Tungaloy Model series: ISO turning inserts Facts Material: coated carbide (SH725) Shape: rhombic, 55° included angle Inscribed circle: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Hole: cylindrical with one‑sided countersink (40°–60°) Special features Single‑sided chipbreaker ISO designation: DCGT11T302 Application: external and internal turning Suitable for small tools and variable engagement conditions FAQ What materials is this insert intended for? The insert in grade SH725 is a coated carbide designed for general turning; selection should match the workpiece material and machining conditions to ensure optimal performance. How does the chipbreaker affect machining? A single‑sided chipbreaker on the DCGT11T302 controls chip flow and reduces the risk of entanglement, supporting stable cutting and improved surface finish during turning operations. Which holders are compatible with this insert? Compatibility is determined by form, relief angle, tolerance class, fixation, size and thickness; holders designed for ISO rhombic inserts with a 55° included angle will typically be suitable. What does the 0.2 mm corner radius mean for finishing? A 0.2 mm corner radius enables finer surface finishes and reduced cutting forces on thin sections, making it suitable for finishing passes and delicate features. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH725 Wendeplatten - Tungaloy
Take advantage of a robust combination of SH725 coated carbide and a rhombic 55° geometry for stable chip control and consistent edge life in turning operations; the 0.2 mm corner radius supports fine finishing where required. Order the DCGT11T302 SH725 insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT11T302 SH725 Tungaloy turning insert — rhombic ISO insert for universal turning The DCGT11T302 SH725 is an ISO rhombic turning insert engineered for external and internal turning, offering reliable chip control and stable cutting edges for variable engagement conditions. Coated carbide grade SH725 for edge stability Rhombic 55° geometry for versatile turning 0.2 mm corner radius for fine finishing Cylindrical hole with single-sided countersink Consistent cutting performance for turning operations The insert is made from coated carbide in grade SH725, a formulation chosen for its edge stability and tolerance to varying chip loads. Its rhombic geometry with a 55° included angle combines strength with adaptability, enabling efficient metal removal while maintaining surface quality. The single-sided chipbreaker assists in predictable chip formation, which reduces the risk of built-up edge and contributes to longer cutting intervals. These properties translate into fewer interruptions on the machine and a steadier process in serial production. Design features that simplify tool selection and setup Compliance with the ISO turning insert series ensures the component matches holders that share form, relief angle, tolerance class, fastening method, size and thickness. The insert’s 7° relief angle and 3.97 mm plate thickness provide the mechanical support required for many external and internal turning applications, while the cylindrical hole with single-sided countersink (40°–60°) facilitates secure clamping and repeatable indexing. Specifying holders and fastenings that correspond to these parameters removes ambiguity during tool assembly and lowers setup times in the workshop. Applications and expected production benefits Intended primarily for turning, this grade performs especially well with smaller tools or when cutting conditions change frequently. The 0.2 mm corner radius permits finer finishes on turned surfaces without sacrificing edge life, making the insert suitable for finishing and semi-finishing passes. Using this insert can contribute to increased process stability and reduced scrap rates through consistent chip control and reliable wear behaviour. For operations prioritising steady throughput and repeatability, the combination of geometry and grade offers a pragmatic balance between productivity and surface quality. Contact Metav Werkzeuge for tailored recommendations on holders, tool setting and batch availability, or request detailed cutting data for specific materials and programmes Technical data Article number: 6737139 Manufacturer article number: 6737139 SKU: 6737139-Tungaloy Manufacturer SKU: TUN6737139 Designation: DCGT11T302 SH725 Tungaloy-Wendeplatte Facts Size: 11 mm Thickness: 3.97 mm Included angle: 55° Relief angle: 7° Corner radius: 0.2 mm Special features Material: carbide (coated) Grade/coating: SH725 (coated carbide) Plate form: rhombic Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: external and internal turning Series: ISO turning insert FAQ What applications suit this insert best? The DCGT11T302 SH725 turning insert is designed for external and internal turning; it is particularly useful for finishing and semi-finishing with small tools or variable engagement conditions. How does the SH725 grade affect performance? The SH725 coated carbide provides enhanced edge stability and wear resistance, so the DCGT11T302 insert maintains cutting performance under changing chip loads and helps extend machining intervals. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; select a holder that matches the ISO geometry and the DCGT11T302 dimensions for secure clamping. What is the significance of the 0.2 mm corner radius? A 0.2 mm corner radius delivers improved surface finish on turned parts while still offering sufficient edge strength for finishing operations when using the DCGT11T302 SH725 insert. Does the insert require special clamping due to its hole style? The cylindrical hole with a single-sided countersink (40°–60°) is intended for standard clamping systems that accept ISO-format inserts; proper torque and a matching seat ensure repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 SH730 Wendeplatten - Tungaloy
Take advantage of a robust, coated carbide grade and ISO conformity to maintain productive turning operations with consistent chip control and surface finish. The combination of a SH730 coating and a compact rhombic geometry ensures stable cutting edges and reliable compatibility with ISO holders — order via Metav Werkzeuge or ask the consultants for application support. DCGT11T302 SH730 ISO turning insert for turning — Tungaloy DCGT11T302 SH730 is an ISO-format turning insert engineered for external and internal turning, offering a single-sided chipbreaker and a compact geometry for variable engagement conditions Coated carbide grade SH730 for stable cutting Rhombic insert, ISO 11 size, 55° included angle 0.2 mm corner radius for fine turning 7° clearance angle, 3.97 mm plate thickness Cylindrical hole with 40°–60° countersink Consistent cutting performance with the SH730 grade The SH730 coated carbide delivers a balance of toughness and edge stability that supports productive metal removal under changing engagement conditions. Designed for turning operations, the chemistry and coating architecture reduce flank wear and help maintain dimensional accuracy over longer tool life. For engineers seeking predictable tool life and repeatable results, this insert contributes to lower process variation and fewer tool changes, improving overall throughput. Secure fit and ISO-based compatibility for reliable clamping The ISO geometry and defined parameters simplify matching to standard holders: the ISO designation and rhombic form align with common clamping systems, while the 55° included angle and 7° clearance angle determine engagement and relief characteristics. Compatibility is affected by form, clearance angle, tolerance class, fixation and overall size/thickness; the insert’s 3.97 mm thickness and cylindrical hole with countersink ensure robust seating and repeatable positioning in compatible toolholders. Controlled chip formation and surface finish for efficient turning A 0.2 mm corner radius combined with a single-sided chipbreaker supports fine finishing passes and reliable chip control on a range of steels and alloys. The insert’s chipbreaking geometry is matched to workpiece conditions to avoid long, stringy chips and to support safe evacuation. In practice, this means shorter cycle times and improved surface quality with fewer secondary operations — a pragmatic choice for workshops aiming for cost-effective precision. For machining applications that demand dependable edge stability and good chip control, contact Metav Werkzeuge for availability and tailored advice on using SH730-coated inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6853995 SKU: 6853995-Tungaloy Manufacturer SKU: TUN6853995 Model series: ISO turning inserts Material: Carbide Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Included angle: 55° Clearance angle: 7° Special features ISO designation: DCGT11T302 Coating / grade: SH730 (coated carbide) Shape: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert suitable for? The DCGT11T302 SH730 insert is formulated for a broad material range; the SH730 coating offers toughness and edge stability suitable for many steels and alloyed materials in turning applications. How does the insert mount in a holder with a countersunk hole? The insert’s cylindrical hole with a 40°–60° one-sided countersink ensures a precise seat in compatible ISO holders, allowing secure clamping and repeatable positioning for reliable turning. Which feature most influences surface finish in fine passes? The 0.2 mm corner radius has a direct effect on surface finish during finishing passes; combined with the single-sided chipbreaker, it promotes consistent contact and improved surface quality. Can the chipbreaker handle varying engagement depths? The single-sided chipbreaker on the DCGT11T302 SH730 is designed to manage changing engagement conditions; selecting the right chipbreaker and cutting parameters ensures controlled chip formation. Is this insert compatible with standard ISO clamping systems? Yes. The ISO-format geometry and defined thickness make it compatible with standard ISO clamping systems, but compatibility depends on holder form, tolerance class and fixation method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp TH10 uncoated carbide grade and a compact rhombic 55° geometry for consistent turning results and reduced rework. Order the DCGT 11T302 TH10 insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT 11T302 TH10 turning insert (ISO 11T302), rhombic 55°, Tungaloy A DCGT 11T302 TH10 ISO-standard turning insert engineered for external and internal turning, especially where low cutting forces and clean surface finishes are required DCGT 11T302 geometry, 55° included angle TH10 uncoated carbide for low cutting forces Single-side chipbreaker, with cylindrical hole 3.97 mm plate thickness for stable clamping Dependable cutting performance that reduces cycle time The insert combines an uncoated carbide grade with an ISO-compliant geometry to deliver predictably low cutting forces and reliable finishes on non-ferrous components. The TH10 grade is a sharp universal sort designed to promote clean shearing rather than ploughing; this reduces heat input at the cutting edge and supports longer service intervals in batch production. For manufacturers seeking repeatable results, the emphasis on measurable process stability offers a clear productivity advantage without complex setup changes. Built for secure clamping and dimensional stability The rhombic 55° geometry and a sturdy 3.97 mm thickness produce a stable cutting edge that tolerates interrupted cuts and varied approach angles. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure firm seating in standard ISO holders, while the 0.2 mm corner radius enables fine finishing where required. A 7° relief angle balances edge strength with clearance; together these design choices yield a component that is both versatile for general turning and robust enough for higher metal removal rates when the setup permits. Practical material range and system integration for workshop use Selected for operations that favour low forces and superior surface quality, the uncoated TH10 grade excels on non-ferrous alloys and in applications where an uncoated cutting edge avoids built-up edge. The single-side chipbreaker provides consistent chip control for many turning tasks; the chipformer and grade should be matched to the workpiece and machining stability for best results. The insert is part of an ISO turning system and is intended for use with a matching external holder or boring bar, plus underlay/clamping sets and spare screws as required for a secure assembly. Technical advice is available to select the correct chipbreaker and mounting components for specific shops and production needs. For original Tungaloy inserts such as the DCGT 11T302 TH10 and expert grade selection, contact Metav Werkzeuge for tailored application advice and rapid delivery. Technical data Article number: 6802834 SKU: 6802834-Tungaloy Manufacturer SKU: TUN6802834 Manufacturer: Tungaloy Core data Corner radius: 0.2 mm Included angle: 55° Relief angle: 7° Plate thickness: 3.97 mm Plate size: 11 Features and compatibility Plate form: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-side Grade/coating: TH10, uncoated carbide Application: turning; external and internal turning Series: ISO turning insert series System assembly: compatible with matching holder or boring bar; underlay/clamp set and spare screws FAQ What materials is this insert best suited for? The DCGT 11T302 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated TH10 cutting edge promotes low cutting forces and clean surface finishes. How does the TH10 grade affect machining performance? TH10, an uncoated carbide grade, provides a sharp cutting edge that reduces cutting forces and heat generation, improving surface quality and process consistency for suitable materials. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the insert is designed for standard ISO holders and boring bars that accept the DCGT 11T302 geometry. What chip control does the insert offer? This item features a single‑side chipbreaker; when paired with the correct TH10 grade it enables reliable chip formation for most turning tasks on the intended materials. What are the key dimensional specifications to check before ordering? Verify the 55° included angle, 0.2 mm corner radius, 3.97 mm plate thickness and the hole/countersink style to ensure compatibility with the chosen clamping system Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated carbide cutting edge, ISO‑compliant geometry and effective chip control for consistent turning performance; order genuine inserts via Metav Werkzeuge or consult our specialists for application advice. DCGT11T302 TH10 Turning Insert for Turning – Tungaloy A DCGT11T302 TH10 Tungaloy turning insert designed for ISO‑standard external and internal turning, offering a sharp uncoated cutting edge and controlled chip formation Uncoated carbide grade TH10 Rhombic DCGT form, 11 mm size Single‑sided chipbreaker for clean chips 7° relief angle with 55° lead angle Precise cutting performance from the uncoated carbide grade The insert is manufactured from cemented carbide in the TH10 grade, an uncoated, sharp universal composition that reduces cutting forces and supports clean surface finishes when machining non‑ferrous materials and similar applications. The combination of a sharp cutting edge and a defined chipbreaker geometry ensures reproducible cutting conditions, which results in stable process behaviour and fewer rework cycles. This makes the insert a cost‑effective choice where low cutting forces and good finish are priorities. Seamless integration into ISO turning tool systems Designed to ISO dimensions, the insert matches standard holders by form, relief angle, tolerance class, mounting and thickness. The rhombic DCGT profile and the specified centre hole with a cylindrical bore plus a one‑sided countersink (40°–60°) permit secure clamping and straightforward indexation. Clear system compatibility reduces setup time and simplifies tooling logistics, enabling quicker changeovers and continuity in production. Optimised chip control for consistent machining A single‑sided chipbreaker on the insert promotes broken, manageable chips and improves surface integrity during turning operations. In practice, this means less downtime for chip clearing, safer handling and more predictable machining behaviour. The modest corner radius (0.2 mm) and the pronounced relief geometry support fine finishing passes while retaining the ability to perform a range of light to moderate roughing tasks on suited materials. Durable form and measured dimensions for predictable results With an insert thickness of 3.97 mm, a plate size of 11 mm and a lead angle of 55°, the component is balanced between rigidity and accessibility in confined toolpaths. The 7° relief angle contributes to reduced rubbing and improved tool life under recommended cutting conditions. Those seeking repeatable outcomes benefit from the dimensional consistency and material choice that support reliable tool life without the need for coated edges in many non‑ferrous and delicate finishing scenarios. For application guidance or to secure original Tungaloy DCGT11T302 TH10 inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6802842 Manufacturer SKU: TUN6802842 Our SKU: 6802842-Tungaloy Designation: DCGT11T302 TH10 Tungaloy insert Data Corner radius: 0.2 mm Plate size: 11 mm Plate thickness: 3.97 mm Relief angle: 7° Lead/approach angle: 55° Special features Material: cemented carbide Coating: uncoated Shape: rhombic (DCGT) Hole: with hole — cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical application: turning (external and internal) FAQ What materials is this insert best suited for? The DCGT11T302 TH10 insert is an uncoated cemented carbide grade optimised for non‑ferrous materials and applications that benefit from a sharp cutting edge and low cutting forces. How does the chipbreaker influence machining? The single‑sided chipbreaker on the DCGT11T302 TH10 promotes controlled, broken chips, improving surface finish and reducing the risk of chip interference during turning operations. Is the insert compatible with standard ISO holders? Yes. The DCGT11T302 TH10 follows ISO dimensions and is compatible with holders that match form, relief angle, tolerance class, mounting and thickness. What are the key dimensions to check when replacing inserts? Check the plate size (11 mm), plate thickness (3.97 mm), corner radius (0.2 mm) and the lead/approach angle (55°) to ensure correct fit and geometry for the intended holder and operation. Can this insert be used for finishing and light roughing? Yes. The sharp uncoated edge and modest corner radius make the insert suitable for fine finishing and light to moderate roughing in appropriate materials. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T302 TH10 Wendeplatten - Tungaloy
Combining the uncoated cemented carbide grade TH10 with the single‑sided chipbreaker and ISO‑standard geometry delivers low cutting forces, clean surface finish and predictable tool life; order the DCGT 11T302 TH10 indexable insert directly via Metav Werkzeuge or contact our technical advisors for compatibility checks. DCGT 11T302 TH10 ISO rhombic turning insert, uncoated carbide — Tungaloy DCGT 11T302 TH10 is an ISO‑standard indexable insert designed for external and internal turning, offering a sharp universal grade for non‑ferrous materials and applications requiring low cutting forces and clean surfaces. ISO‑standard rhombic insert 55° Uncoated cemented carbide TH10 grade Single‑sided chipbreaker, with hole Consistent low‑force cutting for cleaner finishes The combination of an uncoated cemented carbide substrate and the TH10 grade means the insert promotes low cutting forces and a sharp cutting edge, which is especially beneficial when machining non‑ferrous materials. Lower forces reduce spindle load and vibration, resulting in a cleaner surface finish and improved dimensional stability. For job shops and production lines where surface quality and energy efficiency matter, this insert supports repeatable outcomes and reduced rework. Geometry tuned for repeatable accuracy and tool life The rhombic form with a 55° cutting angle and a 0.2 mm corner radius provides a balance between edge strength and fine finishing capability. A 7° clearance minimises rubbing on the flank face, lowering heat generation and extending cutting edge life under stable machining conditions. These geometric choices make the insert suitable for finishing passes and light to moderate roughing where maintaining tolerance and surface quality is a priority. Secure seating and straightforward holder compatibility Compliance with ISO dimensions ensures the insert interfaces reliably with standard external holders and boring bars; compatibility is determined by form, clearance angle, tolerance class, fastening and thickness. The cylindrical hole with a single‑side countersink (40°–60°) provides positive clamping and repeatable seat positioning, while the 3.97 mm thickness contributes to rigidity in clamping assemblies. This predictable mechanical behaviour reduces set‑up time and streamlines tool change procedures on the shop floor. Practical grade and chip control guidance for efficient turning The TH10 uncoated grade is a sharp universal sort tailored to non‑ferrous materials and applications where a clean burr‑free edge is required. The single‑sided chipbreaker aids chip formation and evacuation for many common turning operations; select the chipbreaker and holder geometry according to workpiece material and machining stability. For aluminium, brass or softer alloys, the combination of TH10 and the specified geometry often yields improved cutting efficiency and surface integrity compared with more blunt, coated alternatives. For reliable, low‑force turning with Tungaloy quality, choose the DCGT 11T302 TH10 insert and contact Metav Werkzeuge for stock and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6802839 Our SKU: 6802839-Tungaloy Manufacturer SKU: TUN6802839 Designation: DCGT11T302 TH10 Tungaloy insert Model series: ISO‑Drehwendeschneidplatten Facts Size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting angle: 55° Hole: with hole (cylindrical + single‑side countersink 40°–60°) Features Rhombic insert form Single‑sided chipbreaker Uncoated cemented carbide grade TH10 ISO‑standard indexable insert for turning Application: external and internal turning Compatibility determined by form, clearance, tolerance, fastening and thickness FAQ What materials is this insert suited for? The DCGT 11T302 TH10 insert is specified for non‑ferrous materials and applications where a sharp, uncoated edge supports low cutting forces and clean surface finishes. How does the 0.2 mm corner radius affect machining? A 0.2 mm radius provides a balance between edge strength and surface finish; with the DCGT 11T302 TH10 this helps achieve fine finishes while maintaining adequate edge durability for light to moderate cutting. Is the insert compatible with standard ISO holders? Yes, this insert follows ISO dimensions and the DCGT 11T302 designation ensures mechanical compatibility with ISO‑compliant external holders and boring bars when form, clearance and thickness match. Which chipbreaker is fitted and what is its benefit? The insert features a single‑sided chipbreaker designed to improve chip control and evacuation in many turning operations, supporting consistent quality and safer chip handling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, universal uncoated grade that reduces cutting forces and delivers fine surface quality; combined with ISO compatibility and a secure clamping interface, this insert supports efficient external and internal turning operations. Order the insert directly via Metav Werkzeuge or contact the sales team for application guidance. DCGT DCGT11T302 TH10 indexable turning insert for Turning — Tungaloy, 55° rhombic, uncoated carbide A DCGT11T302 TH10 indexable insert for ISO-compliant external and internal turning, designed as a rhombic plate with a sharp uncoated edge to lower cutting forces in non-ferrous materials. ISO rhombic insert DCGT 55° included angle Uncoated carbide TH10 for low cutting forces 0.2 mm corner radius for fine surface finish Cylindrical hole with one-sided countersink 40°–60° Better results from a sharp, universal grade The insert is built around the TH10 grade, an uncoated carbide formulated to provide a sharp cutting edge that reduces friction and low cutting forces, especially in non-ferrous materials. That combination produces cleaner chips and helps to maintain consistent metal removal rates under varying conditions. The presence of a single-sided chipbreaker further aids chip control during interrupted cuts and light finishing passes, meaning the toolholder spends less time managing chips and more time creating usable parts. For production settings where minimised cutting forces translate directly into longer tool life and reduced spindle load, this design is a clear operational advantage. Predictable fit and secure clamping for shop-floor integration As an ISO-compliant rhombic plate, compatibility with the selected holder depends on the insert’s form, relief angle, tolerance class, fastening method, size and thickness. The DCGT geometry, with its 55° included angle and a cylindrical hole plus single-sided countersink (40°–60°), ensures a repeatable seating position and secure clamping in standard external holders or boring bars. Accurate seat engagement reduces vibration and runout, translating into consistent machining performance across batches. The standardised dimensions also simplify tooling logistics: matching a known ISO designation removes guesswork when replacing plates or configuring multi-station turning heads. Focused applications and handling guidance for reliable finishes With a 0.2 mm corner radius and rhombic outline, the insert is suitable for finishing and light profiling where a fine surface finish is required. The 55° geometry balances edge strength and accessibility: it gives adequate cutting edge for stable feeds while permitting access in confined groove or shoulder areas during internal turning. Selecting the appropriate chipbreaker and matching the insert grade to the workpiece material will determine the best feed and speed window; on non-ferrous components the uncoated edge often permits higher cutting speeds with reduced built-up edge formation. The indexable design supports rapid edge changes and predictable repeatability, helping workshops maintain throughput with minimal interruption. Contact Metav Werkzeuge for stock availability and tailored application advice on Tungaloy inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6802830 SKU: 6802830-Tungaloy Manufacturer SKU: TUN6802830 Facts Included angle: 55° Corner radius: 0.2 mm Plate thickness: 3.97 mm Plate size: 11 Special features ISO designation: DCGT11T302 Plate shape: rhombic Grade: TH10 (uncoated) Material: carbide Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Application: Turning (external and internal) FAQ What materials is this insert best suited to? The DCGT11T302 TH10 Tungaloy insert is optimised for non-ferrous materials and operations where a sharp, uncoated edge reduces cutting forces; the TH10 grade supports clean surfaces and reliable chip formation. How is compatibility with a holder ensured? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the ISO DCGT form and the cylindrical hole with single-sided countersink provide repeatable seating and secure clamping. What surface finish can be expected with this geometry? A 0.2 mm corner radius combined with the rhombic 55° geometry delivers fine surface quality in finishing and light profiling passes, provided the chipbreaker and cutting parameters are matched to the workpiece material. Is the insert coated? The insert is made from uncoated carbide in the TH10 grade, offering a sharp cutting edge that helps to reduce cutting forces and prevent built-up edge on suitable materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 TH10 Wendeplatten - Tungaloy
Taking advantage of the ISO‑compliant rhombic geometry and the TH10 uncoated carbide grade, this insert delivers consistently low cutting forces and clean surfaces in non‑ferrous turning operations; order the DCGT11T302 TH10 insert from Metav Werkzeuge or contact our consultants for application advice. DCGT11T302 TH10 ISO turning insert (rhombic, uncoated carbide) — Tungaloy DCGT11T302 TH10 is an ISO‑standard rhombic turning insert designed for external and internal turning where low cutting forces and fine surface quality are required. ISO‑conform rhombic DCGT geometry Uncoated carbide TH10 for clean surfaces 0.2 mm corner radius for fine details Cylindrical hole with 40°–60° countersink Achieve reliable results with ISO‑standard geometry The ISO‑standard rhombic form and 55° approach angle are engineered to ensure broad compatibility with standard external holders and boring bars, making tool selection straightforward. The insert’s rhombic profile combines rigidity and accessibility for varied turning tasks, while the 7° relief angle reduces rubbing at the flank. Compatibility depends on holder form, tolerance class, clamping and thickness, so the insert integrates into a complete system consisting of the insert, matching external holder or bar, clamp pad and replacement screws, enabling predictable set‑ups and repeatable manufacturing. Low cutting forces and improved surface quality with TH10 The TH10 grade is an uncoated carbide designed as a sharp universal grade for non‑ferrous machining. Its sharp cutting edge reduces cutting forces and promotes chip formation that favours clean surfaces and reduced burrs on parts where material adhesion is a concern. The single‑sided chipbreaker included in this design supports controlled chip flow in typical turning operations; selecting a chipbreaker and grade that match material, stability and cutting conditions optimises component finish and tool life while maintaining efficient cycle times. Workshop efficiency through stable clamping and practical dimensions A 0.2 mm corner radius and a 3.97 mm plate thickness balance edge strength with the ability to produce fine detail and tight corner radii. The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure axial and radial clamping, reducing the likelihood of movement under load and simplifying replacement during set‑ups. This design reduces machine downtime and supports consistent part accuracy across batches. If there is any uncertainty whether this insert suits a specific application, Metav Werkzeuge provides technical support at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 to advise on holder compatibility and cutting data. For dependable turning with Tungaloy's DCGT11T302 TH10 insert, contact Metav Werkzeuge for tailored advice and quick supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6802833 Manufacturer SKU: TUN6802833 Marketplace SKU: 6802833-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Name: DCGT11T302 TH10 Tungaloy‑wendeplatte Facts Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Main angle: 55° Countersink angle: 40°–60° Special features Material: carbide Grade: TH10 (uncoated) Shape: rhombic Hole: cylindrical hole with single‑side countersink Chipbreaker: single‑sided Application: turning (external and internal) ISO designation: 11T302 FAQ What materials is this insert suitable for? The DCGT11T302 TH10 insert from Tungaloy is intended primarily for non‑ferrous materials; the TH10 uncoated carbide grade supports low cutting forces and clean surface results in such applications. Which holders are compatible with this rhombic insert? Compatibility depends on holder form, relief angle and thickness; use holders or boring bars conforming to ISO dimensions for DCGT inserts and ensure clamping elements match the cylindrical hole and countersink geometry. How does the single‑sided chipbreaker affect machining? A single‑sided chipbreaker on the DCGT11T302 TH10 promotes controlled chip formation in turning, which helps maintain surface quality and reduces the risk of chip entanglement in typical turning conditions. What are the key measurable dimensions to check before fitting the insert? Verify insert size (11 mm), thickness (3.97 mm), corner radius (0.2 mm) and relief angle (7°) against the toolholder specifications and the intended cutting parameters for secure and accurate clamping. Can Metav Werkzeuge provide cutting data or application advice for this insert? Yes — Metav Werkzeuge offers technical guidance for the DCGT11T302 TH10 insert and can advise on cutting speeds, feeds and holder selection to match workpiece stability and desired surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH725 for broad steel compatibility and the ISO-standard DCGT form for reliable clamping; the result is consistent machining with reduced tool changes. Order the insert directly via Metav Werkzeuge or consult the specialists for application advice. DCGT 11T304 AH725 Tungaloy turning insert – rhombic 55° ISO-standard DCGT 11T304 AH725 is an indexable turning insert designed for general turning applications, offering a secure fit and versatile performance for steel and stainless steel machining. ISO-standard rhombic insert, 55° PVD-coated carbide grade AH725 Single-sided chipbreaker, 0.4 mm radius Central hole with cylindrical seat and countersink High process reliability for mixed-steel turning The combination of a PVD-coated carbide substrate and the AH725 grade delivers stable performance when machining a range of steels and rostfreie Stähle. The coating reduces built-up edge and improves heat resistance, which directly increases tool life and lowers unplanned tool changes. For operations where material batches vary, this indexable insert provides a predictable cutting behaviour, ensuring consistent cycle times and repeatable surface quality. The single-sided chipbreaker promotes controllable chip formation, particularly on medium to fine turning passes, and the corner radius 0.4 mm supports a balance between edge strength and surface finish. Secure clamping and accurate seating for repeatable results The insert conforms to ISO dimensions, so compatibility with holders depends on form, relief angle, tolerance class, fastening and thickness — all standardised for interchangeability. The 55° rhombic geometry gives a versatile approach angle that is suitable for both external and internal turning, while the central hole with cylindrical seat and countersink (40°–60°) provides reliable positional accuracy and clamping stability. A plate thickness of 3.97 mm ensures sufficient rigidity in smaller tooling systems, reducing vibration and helping to maintain dimensional tolerances over longer production runs. Economical integration and simplified tooling decisions This indexable insert is intended for applications where process security and flexibility are priorities. The AH725 grade is engineered to resist chipping and breakouts on interrupted cuts and smaller toolholders, reducing scrap risk and set-up time. Selecting a matching holder and clamping set from the same ISO family simplifies inventory and shortens retooling. The standardised form and hole make replacement straightforward, while the PVD coating contributes to lower total cost of ownership by extending life under mixed-material conditions. Contact Metav Werkzeuge for specification and ordering of the Tungaloy DCGT11T304 AH725 turning insert: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6857018 Manufacturer SKU: TUN6857018 Model series: ISO-Drehwendeschneidplatten Type designation: DCGT11T304 Grade/sort: AH725 Material: Hartmetall Facts Geometry: rhombic 55° Corner radius: 0.4 mm Relief angle: 7° Thickness: 3.97 mm Size: 11 mm Special features PVD-coated carbide Single-sided chipbreaker Central hole with cylindrical seat and one-sided countersink (40°–60°) Application: turning Compatible with ISO-standard holders and clamping sets FAQ What materials is this insert suitable for? The DCGT11T304 AH725 insert is designed primarily for machining steel and rostfreie Stähle; the PVD-coated carbide matrix supports operations on mixed steel grades. How does the single-sided chipbreaker affect performance? A single-sided chipbreaker improves chip control on a range of turning passes, helping the insert to produce consistent chips and reduce the likelihood of entanglement during production. What determines compatibility with a toolholder? Compatibility is determined by insert form, relief angle, tolerance class, fastening style, size and thickness; the ISO-standard DCGT form ensures broad interchangeability with compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet wear resistance, ISO compatibility and a compact 0.4 mm corner radius for consistent finishing results; order the insert directly via Metav Werkzeuge or consult their specialists for holder and clamping recommendations. DCGT 11T304 AT9530 Tungaloy turning insert — coated cermet, 0.4 mm radius The DCGT11T304 AT9530 is an ISO-standard turning insert optimised for finishing and light turning of steel components with a focus on surface quality and uniform wear. Coated cermet grade AT9530 for uniform wear ISO rhombic insert, size 11 for standard holders 0.4 mm corner radius for fine surface finish Single-sided chipbreaker suitable for finishing Consistent finishing and extended tool life The coated AT9530 grade delivers a balance between abrasion resistance and edge stability, making this insert particularly effective for finishing and light-steel turning. The coated cermet construction supports a controlled, even wear pattern that preserves the cutting geometry over longer cycles, which reduces the frequency of index changes and lowers cost per component. A 0.4 mm corner radius promotes a fine surface appearance and helps maintain dimensional stability on slender or interrupted cuts. For manufacturers seeking repeatable part quality, these material and geometry choices translate directly into fewer reworks and steadier production output. Secure fit and ISO conformity for fast changeovers The insert is ISO‑standardised, with a rhombic shape and the designation 11T304, ensuring predictable compatibility with ISO holders. The combination of form, 7° relief (frewinkel), tolerance class, clamping method and plate thickness (3.97 mm) determines correct mounting; when matched correctly, setup time is minimised and process repeatability improves. The presence of a central hole with a cylindrical bore and a single‑side countersink (40°–60°) gives secure clamping and straightforward mechanical fixation. Using ISO‑conforming components simplifies inventory and streamlines tool change procedures on multi‑machine floors. Controlled chip formation and stable cutting A single‑sided chipbreaker geometry suited to finishing operations supports predictable chip flow and reduced vibration during light cuts. Controlled chip formation reduces the likelihood of chip recutting, improves surface consistency and lessens thermal loading on the cutting edge. The stable edge condition of the AT9530 grade, combined with the insert’s geometry, contributes to reliable process windows and easier parameter tuning. In practice, this means shorter set‑up times and more stable cycle times for precision turning tasks. Practical application notes for turning operations Designed for external and internal turning, this insert works best where surface quality and uniform wear are priorities. The cutting insert is intended for steel machining in finishing or light‑cut conditions; selecting the appropriate chipbreaker and clamping arrangement is essential to exploit the AT9530 benefits fully. When pairing the insert with a suitable holder and clamping set, attention to rigidity and feed stability will maximise the life of the cutting edge and the consistency of the surface finish. For assemblies with tight dimensional tolerances, the insert’s geometry supports repeatable outcomes across batch production. For professional finishing applications, request the Tungaloy DCGT11T304 AT9530 via Metav Werkzeuge (SKU 6967274-Tungaloy) or contact Metav Werkzeuge at info@metav-werkzeuge.com / +49 2822 7131930 for holder recommendations Technical data Article number: 6967274 SKU: 6967274-Tungaloy Manufacturer SKU: TUN6967274 Facts Corner radius: 0.4 mm Included angle: 55° Relief angle: 7° Plate thickness: 3.97 mm Plate size: 11 Special features Coating/grade: AT9530 Cutting material type: coated cermet Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: turning — finishing and light machining of steel FAQ Is this insert suitable for finishing steel components? Yes. The DCGT11T304 AT9530 Tungaloy turning insert (SKU 6967274-Tungaloy) is designed for finishing and light machining of steel, prioritising surface quality and uniform wear. How does the chipbreaker affect performance? The single‑sided chipbreaker on this indexable insert supports consistent chip control during finishing cuts, improving surface consistency and reducing the risk of chip recutting. What determines compatibility with a toolholder? Compatibility is governed by the insert form, relief angle, tolerance class, fastening style, size and thickness; the ISO rhombic 11 designation streamlines the selection of matching holders for the DCGT11T304 AT9530 insert. What does the ISO designation 11T304 indicate? The ISO code describes the insert geometry and size; here it corresponds to a rhombic plate with the dimensions and hole/countersink features listed for the DCGT11T304 AT9530. Can the insert be used for internal turning as well as external? Yes. The insert is suitable for both external and internal turning operations, provided the holder and set‑up ensure sufficient rigidity and correct cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of a proven ISO geometry, the GH330 grade and a fine 0.4 mm corner radius for consistent surface quality and reliable tool life; order genuine Tungaloy inserts through Metav Werkzeuge or consult the technical team for application-specific guidance. DCGT 11T304 GH330 turning insert — Tungaloy The DCGT 11T304 GH330 is an ISO rhombic, 55° indexable insert for general turning, designed to balance wear resistance and edge stability in a wide range of turning tasks ISO rhombic 55° geometry GH330 grade for wear resistance 0.4 mm corner radius for fine finishing Cylindrical hole with countersink 40°–60° Geometry engineered for consistent chip control The rhombic 55° geometry combined with a single-sided chipbreaker produces predictable chip formation and stable cutting forces, which helps to maintain cycle-time consistency on repetitive turning tasks. The moderate 7° clearance angle reduces rubbing on the flank while preserving edge life, and the 0.4 mm corner radius supports high-quality surface finishes in light to medium cuts. Compatibility with holders depends on form, relief angle, tolerance class, clamping and thickness, ensuring repeatable seating when paired with the correct ISO external holder. Carbide grade that balances wear resistance and toughness The insert is made from a cemented carbide substrate and finished in Tungaloy's GH330 grade, optimised for turning. This grade emphasises balanced performance: adequate wear resistance for longer tool life under continuous machining and sufficient toughness to resist chipping under interrupted cuts. The result is fewer insert changes, steadier process outputs and improved overall productivity when machining a variety of steels and common ferrous materials. Practical mounting and ISO compliance for reliable set-up Designed as an ISO-standard indexable insert, the DCGT 11T304 supports a straightforward system build-up: indexed insert, compatible outer holder or boring bar, support shim/clamping set and replacement fixing screws. Key dimensions are size 11, thickness 3.97 mm and the specified cylindrical hole with single-sided countersink (40°–60°) for secure clamping. These measurable parameters make tool selection and inventory management simpler and reduce the risk of incorrect seating or misalignment during tool changes. Choosing the right chipbreaker and application matching Select the single-sided chipbreaker variant in line with workpiece material, cutting conditions and machine stability to extract the maximum advantage from GH330. For fine finishing or tight dimensional tolerances prefer the smaller corner radius; for heavier, interrupted cuts consider a more robust holder and review cutting data accordingly. If uncertainty remains about fitment or grade choice, Metav Werkzeuge’s technical advisors can provide guidance based on the machine, workpiece material and targeted productivity. Contact Metav Werkzeuge for application-specific advice on Tungaloy GH330 turning inserts and to secure prompt supply of genuine DCGT 11T304 stock for dependable production results Technical data Article number: 6802845 Manufacturer SKU: TUN6802845 SKU: 6802845-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 11T304 Numbers Corner radius: 0.4 mm Plate thickness: 3.97 mm Plate size: 11 Cutting edge angle: 55° Clearance angle: 7° Materials & features Material: cemented carbide Grade: GH330 (Tungaloy) Shape: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Intended application: turning (external and internal) FAQ What materials is this insert suitable for? The DCGT 11T304 GH330 insert from Tungaloy is designed for general turning and performs well on a broad range of ferrous materials thanks to the GH330 grade’s balance of wear resistance and toughness. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius helps to produce finer surface finishes and reduced vibration in finishing passes; the GH330 grade supports consistent edge stability during these operations. Which holders are compatible with this ISO insert? Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; use an ISO external holder sized for size 11 and 3.97 mm thickness to ensure correct seating for the DCGT 11T304. Is the DCGT 11T304 available with different chipbreakers? This variant is specified with a single-sided chipbreaker; alternative chipbreaker geometries may be offered depending on cutting strategy and material—refer to technical guidance for selection. What is the manufacturer article number and SKU? Manufacturer article number 6802845 and SKU 6802845-Tungaloy identify this exact Tungaloy DCGT 11T304 GH330 turning insert for ordering and inventory control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com