DCGT 11T301 NS9530 Wendeplatten - Tungaloy
Conflicting product data: the material is specified both as cemented carbide and as an uncoated cermet; please provide corrected material information to ensure clarity and accuracy in the product description, as this discrepancy could lead to confusion or potential issues in application, selection, or performance, particularly for users relying on precise material properties for their specific needs; it is essential to verify whether the material is indeed cemented carbide, which is typically known for its hardness and wear resistance, or an uncoated cermet, which may offer different characteristics such as improved toughness or thermal stability, to avoid any misunderstandings or misapplications in practical scenarios.
DCGT 11T301 NS9530 Wendeplatten - Tungaloy
Data inconsistency: the product data contains contradictory specifications for the cutting material. One entry identifies the tool as a carbide type, while another describes an uncoated cermet grade (NS9530). These are distinct material classes with different cutting properties and application limits; machining recommendations and compatibility depend on the correct designation. This discrepancy could lead to confusion for users relying on accurate information for selecting tools suitable for specific machining tasks, potentially resulting in suboptimal performance or even damage to equipment. Please confirm which material specification is accurate so that a full and reliable product description can be produced, ensuring clarity and proper usage guidance.
DCGT 11T301 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing performance and consistently low cutting forces with this ISO indexable insert; its uncoated cermet grade delivers high surface quality in continuous cuts. Order the insert directly via Metav Werkzeuge or contact their advisors for assistance with holder compatibility and optimal chipbreaker selection. DCGT11T301 NS9530 ISO turning insert (finishing) — Tungaloy The DCGT11T301 NS9530 is an ISO-standard indexable turning insert engineered for finishing operations on steel, offering a sharp cutting edge and stable performance in continuous cuts ISO-standardised rhombic insert DCGT11T301 Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Cylindrical hole with 40°–60° countersink Precision finishing for steel turning with low cutting forces The uncoated cermet grade NS9530 is tailored for finishing applications on steel, combining a fine, sharp cutting edge with low contact stresses to produce superior surface integrity. In continuous cutting conditions and with modest depths of cut, this material delivers reduced built-up edge and consistent microgeometry on the component. The result is improved process stability and less rework, which supports shorter downstream finishing cycles and predictable part quality. ISO compatibility and secure clamping for reliable interchangeability As an ISO-standardised insert, the plate’s geometry — rhombic form, size 11 and 3.97 mm thickness — determines compatibility with holders; fit depends on form, clearance angle 7°, tolerance class, fixing method, size and thickness. The central cylindrical hole with a one-sided countersink (40°–60°) ensures positive, repeatable clamping in appropriate ISO holders. Selecting a holder that matches those parameters maintains repeatable cutting conditions and eases inventory management across production lines. Practical recommendations for chip control and productivity Chip control and tool life depend on matching the single-sided chipbreaker and grade to the workpiece, machining strategy and machine–fixture stability. For finishing steel, the sharp cutting edge of this grade helps keep cutting forces low and surface roughness down; pairing with a holder that provides robust support enhances edge life. Choosing the correct chipbreaker reduces vibration and optimises evacuation, which in turn supports higher effective productivity and consistent dimensional results. Integration into a complete turning system and economic advantages The typical system comprises the ISO turning insert, a compatible external holder or boring bar, and the associated support components such as pads and clamping sets. Using a finishing-grade cermet insert like this one can reduce downstream polishing or grinding, lowering overall production cost per part. Consistent chip formation and stable edge behaviour contribute to predictable intervention intervals, simplifying maintenance planning and stockholding for production operations. For precise finishing with Tungaloy reliability, order the DCGT11T301 NS9530 via Metav Werkzeuge or request tailored advice from Metav Werkzeuge’s consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6723909 Manufacturer SKU: TUN6723909 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Material: cemented carbide Insert designation: DCGT11T301 Grade: NS9530 Shape: rhombic Chipbreaker: single-sided Facts Thickness: 3.97 mm Size: 11 Corner radius: 0.1 mm Clearance angle: 7° Wedge/wedge angle: 55° Hole: cylindrical with one-sided countersink (40°–60°) Special features Uncoated cermet finishing grade NS9530 Sharp cutting edge for low cutting forces ISO-standardised turning insert Suitable for continuous cuts and small depths of cut Compatible with ISO holders determined by form, clearance, tolerance, fixing, size and thickness FAQ What materials is the DCGT11T301 NS9530 designed for? The DCGT11T301 NS9530 is engineered primarily for finishing operations on steel; the uncoated cermet grade NS9530 emphasises low cutting forces and high surface quality when turning steel. How does the insert secure to the holder? Clamping relies on the insert’s rhombic form, central cylindrical hole with a one-sided countersink (40°–60°) and matching holder geometry; correct clamping maintains the repeatability and stability expected from a Tungaloy indexable insert. Is this insert suitable for interrupted cuts? The DCGT11T301 NS9530 is optimised for continuous cutting and small depths of cut; for heavily interrupted cuts, a different grade or chipbreaker may be preferable to protect the cutting edge. Which chipbreaker should be chosen with this insert? Select the chipbreaker based on workpiece material, machining type and machine stability; the insert’s single-sided chipbreaker provides chip control for finishing, but tailored chipformers improve performance in different conditions. What determines compatibility with existing tooling systems? Compatibility is determined by form, clearance angle, tolerance class, fixing method, insert size and thickness; verifying these parameters against holder specifications ensures correct fit and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 NS9530 Wendeplatten - Tungaloy
Optimise finishing turns with the uncoated cermet NS9530 and the precise DCGT geometry to achieve superior surface quality and reduced cutting forces. Benefit from the combination of a sharp cutting edge, controlled chip formation and ISO compatibility for efficient turning. Order the insert directly via Metav Werkzeuge or ask our consultants for application support. DCGT 11T301 NS9530 Turning Insert — DCGT Rhombic, Uncoated Cermet by Tungaloy A DCGT11T301 NS9530 finishing insert engineered for precision external and internal turning, delivering low cutting forces and a high-quality surface finish. DCGT rhombic ISO profile 55° angle Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Compatible with 7° clearance and 3.97 mm thickness Consistent finishing performance for steel components The uncoated cermet grade NS9530 is formulated for finishing cuts in steel, offering a sharp cutting edge that reduces cutting forces and minimises vibration. For continuous-feed operations and small depths of cut, this combination yields a high surface finish and predictable dimensional results. The insert’s rhombic DCGT profile with a 55° inclination ensures stable engagement and uniform contact over the cutting edge, which supports repeatable component quality in batch production. Compatibility and secure clamping for reliable use Compatibility with clamping systems is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; this insert is designed with a 7° clearance and a thickness of 3.97 mm to fit standard ISO holders for the DCGT family. The central hole is equipped for a cylindrical seating with a one-sided countersink (40°–60°), facilitating straightforward mounting and secure retention. Clear specification of holder geometry and correct torque on the clamping screw help maintain tool life and process stability. Technical advantages of the grade and geometry The small corner radius of 0.1 mm supports fine detail and excellent surface integrity while limiting cutting forces in finishing passes. The ISO designation ensures broad availability of compatible holders and accessories, simplifying inventory and tool changeover. As an uncoated cermet option, the grade offers excellent edge sharpness and thermal stability in finishing regimes; for many turning applications this translates into reduced rework and a smoother downstream process. For tailored cutting data or to procure genuine Tungaloy DCGT 11T301 NS9530 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to request application guidance or ordering assistance. Technical data Article number: 6723910 Manufacturer SKU: TUN6723910 Metav SKU: 6723910-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core specifications ISO designation: 11T301 Insert form: rhombic (DCGT) Size: 11 Thickness: 3.97 mm Included angle: 55° Clearance angle: 7° Corner radius: 0.1 mm Special features Grade: NS9530 Cutting material: uncoated cermet Chipbreaker: one-sided Hole: with cylindrical hole + one-sided countersink (40°–60°) Application: Turning FAQ What materials is this insert best suited for? The DCGT 11T301 NS9530 insert is optimised as a finishing grade for steel, offering a sharp edge and low cutting forces suitable for continuous cuts and small depths of cut. How does the small corner radius affect surface finish? A corner radius of 0.1 mm on the DCGT 11T301 helps achieve finer surface integrity and reduced contact stress during finishing, improving the final component quality. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle and thickness; the DCGT geometry and the 3.97 mm thickness match standard ISO DCGT holders with the appropriate seating for a cylindrical hole and countersink. Is the NS9530 grade coated or uncoated, and what is the benefit? NS9530 is an uncoated cermet grade; this provides a very sharp cutting edge and excellent surface finish in finishing operations, particularly for steel. Does the insert include a chipbreaker, and how does it influence machining? Yes, the insert features a one-sided chipbreaker that promotes controlled chip formation during turning, aiding process repeatability and shop-floor safety. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of reliable edge life, ISO compatibility, and stable chip control for efficient turning operations; order the DCGT11T301 SH7025 Tungaloy insert directly via Metav Werkzeuge or consult our specialists if needed. DCGT 11T301 SH7025 indexable turning insert by Tungaloy — rhombic 55° with 0.1 mm corner radius DCGT 11T301 SH7025 indexable insert engineered for robust external and internal turning, offering a coated carbide grade optimised for edge stability in variable engagement conditions. ISO-indexable rhombic insert 55° angle Coated carbide grade SH7025 for edge life Single-sided chipbreaker for stable chip control 0.1 mm corner radius, with hole and 40°–60° countersink Predictable machining through standardised ISO compatibility The ISO-conforming design ensures predictable tool behaviour and straightforward holder selection. As the insert's shape, clearance angle, tolerance class, fastening and thickness determine compatibility with holders, adherence to the ISO series simplifies inventory management and reduces setup time. This predictability supports uninterrupted machining cycles and lowers the risk of selecting the wrong geometry for a given task, which in turn increases machine uptime and process reliability. Durable cutting performance from SH7025 coated carbide The SH7025 grade is a coated carbide developed for resilient, edge-stable performance, particularly suited to smaller tools or applications where cutting conditions change frequently. The combination of substrate and coating promotes even wear and reduces the need for premature index changes. For production environments this translates into longer tool life, fewer interventions at the machine and consistent component quality across batches. Improved surface finish and chip control through optimised geometry The rhombic 55° insert geometry with a 0.1 mm corner radius and a single-sided chipbreaker delivers controlled chip formation and a fine surface finish on turned parts. The insert is supplied with hole and a cylindrical hole plus single-side countersink (40°–60°) to ensure secure clamping and repeatable positioning. The plate thickness of 3.97 mm gives sufficient stiffness for typical external and internal turning operations, reducing vibration and improving dimensional stability of machined features. System-level efficiency and practical application guidance As part of a system that includes a matching external holder or boring bar, a support shim or clamping set and replacement screws, the insert integrates easily into existing tool lines. Typical applications include external and internal turning; selection of the appropriate chipbreaker and grade should be matched to workpiece material, machining strategy and setup rigidity. The result is a cost-effective solution that balances productivity with consistent performance, making it suitable for batch production and mixed-operation shops. For technical advice on selecting inserts or holders for specific turning tasks and to check availability of the Tungaloy DCGT11T301 SH7025, contact Metav Werkzeuge for detailed guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967480 Manufacturer SKU: TUN6967480 Supplier SKU: 6967480-Tungaloy Facts Application: Turning Series: ISO turning indexable inserts Material: Carbide Grade: SH7025 Shape angle: 55° Clearance angle: 7° Corner radius: 0.1 mm Plate size: 11 Plate thickness: 3.97 mm Special features Rhombic plate form Single-sided chipbreaker With hole; cylindrical hole + single-side countersink (40°–60°) Compatible with matching holders, shims and screws FAQ What materials can this insert machine effectively? The DCGT11T301 SH7025 insert is intended for general turning tasks; the SH7025 grade offers broad material applicability and is particularly effective where edge stability is required across varying cutting conditions. How does the 55° rhombic geometry affect turning performance? A 55° rhombic geometry provides a versatile compromise between cutting strength and access to internal features; the angle supports controlled cutting forces and improved surface finish when paired with the correct holder and setup. Is the insert suitable for internal boring operations? Yes, the indexable rhombic design and modest corner radius make the insert suitable for both external and internal turning, provided the holder offers the necessary reach and rigidity. What clamping features ensure repeatable positioning? The insert is supplied with hole and a cylindrical hole with a single-side countersink (40°–60°), enabling secure clamping and repeatable positioning in compliant clamping systems. Which spare parts are typically required for system integration? A matching external holder or boring bar, a support shim or clamping set and replacement screws form the typical system components needed for effective integration of this indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of a tough SH7025 coated carbide grade, a precise 0.1 mm corner radius and ISO compatibility for consistent turning performance; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. DCGT 11T301 SH7025 indexable turning insert for turning by Tungaloy A DCGT 11T301 SH7025 indexable turning insert designed for ISO‑standard turning operations, offering a rhombic geometry and a one‑sided chipbreaker for reliable external and internal turning. SH7025 coated carbide grade for durable edges ISO rhombic 11 size with 55° included angle 0.1 mm corner radius for fine finishing Cylindrical hole with single‑side countersink (40°–60°) Consistent turning performance from a robust coated grade The SH7025 grade is a coated cemented carbide designed to maintain a stable cutting edge under varying engagement conditions; this results in more predictable wear behaviour and longer effective life when compared with uncoated grades. With a 0.1 mm corner radius and a 7° clearance angle, the geometry supports fine finishing and controlled chip formation, which is especially useful when working with shorter overhangs or variable depths of cut. The ISO designation ensures compatibility with a wide range of standard toolholders and helps streamline tool changeovers while preserving process repeatability. Secure clamping and repeatable seating for steady production Compatibility with the toolholder depends on form, clearance angle, tolerance class, fixing method, size and thickness; the rhombic plate and the cylindrical hole with single‑side countersink provide stable seating and repeatable positioning. The plate thickness of 3.97 mm and the standard size designation simplify selection of the correct shim/clamp set and replacement screws, reducing downtime during servicing. A reliably clamped insert reduces vibration and promotes a consistent surface finish, translating into fewer rework cycles and improved throughput. Tailored chip control and application flexibility The one‑sided chipbreaker is optimised for common turning tasks and supports predictable chip flows in both external and internal turning. Selecting the appropriate chipbreaker and the SH7025 grade according to workpiece material and cutting conditions helps to avoid built‑up edge and to maintain cutting edge integrity. The ISO series construction means the insert can be deployed across different operations with minimal adaptation, enabling an efficient inventory strategy for small to medium machining shops focused on stable, repeatable results. Streamlined tooling system for efficient workshop logistics The ISO insert forms part of a practical system comprising the insert itself, a compatible external holder or boring bar, a backing/shim and clamping set plus spare screws. Managing tooling as a system simplifies procurement and ensures consistent replacement parts are used, which supports process reliability on the shopfloor. The item is identified as DCGT11T301 in the ISO series and carries manufacturer references for quick reordering; pairing the right holder and clamping hardware enables rapid insert changes and predictable machining performance. Contact Metav Werkzeuge for application advice or to arrange supply of the Tungaloy DCGT11T301 SH7025 indexable turning inserts via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 7743492 SKU: 7743492-Tungaloy Manufacturer SKU: TUN7743492 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Application: turning Facts Corner radius: 0.1 mm Clearance angle: 7° Included angle: 55° Plate thickness: 3.97 mm Plate size: 11 mm Special features Rhombic plate form One-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) ISO designation DCGT11T301 Coated grade SH7025 FAQ What turning tasks is this insert designed for? The DCGT11T301 SH7025 Tungaloy indexable turning insert is intended for ISO‑standard external and internal turning where a rhombic geometry and a small corner radius support fine finishing and reliable chip control. Which holder requirements must be observed for correct fitment? Compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness; matching the insert DCGT 11T301 to a compatible external holder or boring bar ensures correct seating and repeatable clamping. How does the SH7025 grade influence machining performance? The SH7025 coated cemented carbide provides stable cutting edges and improved wear resistance under varying engagement conditions, promoting consistent cycle times and surface quality during turning operations. What is the function of the one‑sided chipbreaker? The one‑sided chipbreaker helps to control chip shape and evacuation in typical turning cuts, reducing the risk of chip entanglement and supporting more consistent surface finishes. Can the insert be used with standard ISO tooling systems? Yes, the DCGT11T301 is an ISO‑series insert; using standard shims, clamping sets and replacement screws simplifies inventory and ensures rapid insert changes without the need for bespoke hardware. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 SH7025 Wendeplatten - Tungaloy
Combining the coated carbide SH7025 grade with the precise 55° rhombic geometry and a 0.1 mm corner radius gives a robust balance of edge toughness and fine finishing; order the DCGT11T301 SH7025 directly via Metav Werkzeuge or consult our advisors if compatibility checks are required. DCGT11T301 SH7025 ISO turning indexable insert by Tungaloy — coated carbide, 0.1 mm radius The DCGT11T301 SH7025 is an ISO‑standard rhombic indexable insert for external and internal turning, designed for variable engagement conditions and improved edge stability. Coated carbide SH7025 for edge toughness Rhombic 11 mm plate, 55° geometry 0.1 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Consistent cutting performance through geometry and grade The combination of rhombic 55° geometry and the coated carbide SH7025 grade is engineered to deliver reproducible cutting behaviour across a range of turning tasks. The geometry provides good access to turned features while the 0.1 mm corner radius supports fine surface finishes and reduced vibration during light to medium cuts. These elements are selected to reduce the need for frequent index changes, enabling more stable cycle times and predictable tool life for small tools or fluctuating entry conditions. Secure seating and repeatable clamping for reliable machining A secure clamping interface is essential for repeatable results; the plate is supplied with a cylindrical hole and a single‑side countersink (40°–60°) to ensure positive seating. The 3.97 mm plate thickness and central hole configuration support stable fixation in compatible holders, reducing the risk of micro‑movement under load. Because the system is designed as an ISO insert, the overall setup comprises the insert, a matching external holder or boring bar, a shim/clamp set and spare screws, which together ensure consistent repeatability and simple reassembly after maintenance. Versatile application range and material handling This insert is intended for turning operations, suitable for both external and internal work, and is recommended where edge stability is required under variable engagement. The SH7025 composition is a tough, edge‑stable coated carbide that performs well when smaller tools are used or when cutting conditions change during a cycle. Selecting an appropriate chipbreaker and grade matching the workpiece material and machining strategy will yield improved surface quality and extended tool life, translating into lower process costs over time. Practical guidance for selection and compatibility Compatibility with a toolholder is determined by several mechanical parameters: the insert form, 7° relief angle, tolerance class, clamping method, overall size and thickness. These items must be matched to the holder specification to ensure proper seating and cutting geometry. If the existing fixture uses the same ISO designation and clamping style, the insert can be exchanged with minimal adjustments; otherwise, confirm the holder dimensions and tolerance class before installation to prevent misfit or compromised cutting performance. Contact Metav Werkzeuge to verify holder compatibility for the DCGT11T301 SH7025, arrange delivery or request detailed technical assistance — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 7743498 Manufacturer SKU: TUN7743498 Our SKU: 7743498-Tungaloy ISO designation: DCGT11T301 Label: DCGT11T301 SH7025 Tungaloy‑insert Facts Plate size: 11 mm Plate thickness: 3.97 mm Corner radius: 0.1 mm Relief angle: 7° Included angle: 55° Special features Material: carbide Grade/coating: SH7025 (coated carbide) Plate shape: rhombic Chipbreaker: single‑side Hole style: cylindrical hole with single‑side countersink (40°–60°) Intended use: turning; compatible with matching external holder or boring bar, shim/clamp set and spare screws FAQ How is holder compatibility determined for this insert? Compatibility is defined by the insert form, relief angle, tolerance class, clamping arrangement, size and thickness; the DCGT11T301 SH7025 must match the holder’s ISO interface to ensure correct seating and cutting geometry. Which turning operations are suitable for this insert? This indexable insert is suitable for both external and internal turning; its SH7025 grade and rhombic geometry make it a good choice for fine finishing and variable engagement conditions. What advantages does the SH7025 grade provide? The SH7025 coated carbide offers enhanced edge toughness and stability, which supports longer tool life and consistent surface quality, particularly when smaller tools or changing entry conditions are encountered. How does the central hole and countersink affect mounting? The cylindrical hole with a single‑side countersink (40°–60°) provides a positive seating surface for the clamp and screw, improving repeatability and minimising the risk of micro‑movement during machining. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T301 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide grade SH725, rhombic 55° geometry and precise 0.1 mm corner radius for consistent turning results; order directly via Metav Werkzeuge or request advice from our consultants. DCGT 11T301 SH725 indexable turning insert — rhombic 55° coated carbide by Tungaloy DCGT11T301 SH725 is an ISO‑standard indexable turning insert designed for general external and internal turning applications, offering a balance of toughness and edge stability for varying engagement conditions. Coated carbide grade SH725 Rhombic 55° geometry for versatile turning 0.1 mm corner radius for fine surface finish Cylindrical hole with single‑side countersink Reliable cutting performance for mixed machining The coated carbide SH725 grade is developed for toughness and edge stability, making it suitable where cutting conditions vary or where smaller tools are used. The insert’s rhombic 55° geometry provides a versatile cutting edge that is effective for both external and internal turning, while the single‑sided chipbreaker promotes controlled chip formation. This combination reduces the risk of unexpected edge chipping and supports consistent cycle times, improving process reliability in series production or jobbing environments. Precision features that improve surface quality and tool life With a 0.1 mm corner radius and a plate thickness of 3.97 mm, the insert enables fine finishing passes without sacrificing robustness. The cylindrical hole with a one‑side countersink (40°–60°) ensures secure clamping in compatible holders and stable cutting forces. Explained simply: a small corner radius evens out cutting loads and reduces vibration on light cuts, while the coated cemented carbide substrate extends wear resistance and maintains sharpness, which together lengthen effective tool life and lower machining costs per part. Compatibility and grade selection guidance for efficient integration The insert is ISO‑coded as 11T301 and is compatible with holders that match form, clearance angle, tolerance class, fixation, size and thickness. For best results, select the chipbreaker and grade according to workpiece material and machining stability rather than only feed and speed. Technical teams can advise on matching this insert to the correct external holder or boring bar; such alignment optimises cutting conditions and helps achieve the promised surface quality and repeatability. For robust, consistent turning with Tungaloy’s SH725 grade, contact Metav Werkzeuge for availability and tailored advice — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6737138 Manufacturer SKU: TUN6737138 ISO designation: DCGT11T301 Grade: SH725 Material: cemented carbide Facts Corner radius: 0.1 mm Thickness: 3.97 mm Plate size: 11 mm Clearance angle: 7° Included angle: 55° Hole style: with hole (cylindrical + single‑side countersink 40°–60°) Special features Coated cemented carbide grade SH725 Rhombic plate shape Single‑sided chipbreaker ISO‑standard indexable turning insert Compatible with matching external holders and boring bars FAQ What machining tasks is this insert intended for? The DCGT11T301 SH725 turning insert is designed for external and internal turning, offering good edge stability where engagement conditions change. Which materials can be machined with the SH725 grade? SH725 as a coated carbide grade is aimed at a broad material range where toughness is needed; selection of the chipbreaker and cutting parameters should follow the workpiece material and stability of the setup. How does the 0.1 mm corner radius affect surface finish? A 0.1 mm corner radius on the insert smooths cutting forces during finishing passes, helping to achieve finer surface quality while reducing the risk of small‑edge chipping. What does the hole style mean for clamping? The cylindrical hole with a single‑side countersink (40°–60°) provides secure and repeatable clamping in compatible holders, contributing to stable cutting conditions. Is this insert ISO‑compliant and easy to replace? Yes, the DCGT11T301 follows ISO standard designation 11T301, enabling straightforward replacement in standardised clamping systems when form, thickness and fixation match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 SH725 Wendeplatten - Tungaloy
Take advantage of a coated carbide grade SH725 for stable cutting edges and reliable chip control, combined with a 0.1 mm corner radius for improved surface finish and reduced cutting forces; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCGT 11T301 SH725 Tungaloy – ISO turning insert, coated carbide, 0.1 mm radius The DCGT11T301 SH725 is an ISO‑standard rhombic turning insert designed for external and internal turning in general machining operations. ISO-standard rhombic turning insert Coated carbide grade SH725 0.1 mm corner radius for fine finishes Single-sided chipbreaker for versatile turning High‑performance grade for varying cutting conditions The insert is made of coated carbide and specified with the SH725 grade, a formulation optimised for toughness and edge stability. This composition supports consistent performance in interrupted cuts and variable engagement conditions, reducing the risk of chipping on small toolholders. The result is a measurable improvement in tool life and process reliability, particularly when machining mixed batches or components with changing cross sections. Precise geometry and ISO compatibility for simple integration With a rhombic form and the ISO designation 11T301, compatibility with holders depends on shape, clearance, tolerance class, fastening, size and thickness. The insert features a 7° clearance angle and a 55° approach angle, while the 0.1 mm corner radius balances finish quality with edge strength. These standardised dimensions enable straightforward interchange in existing ISO turning systems and support predictable cutting parameters for CAM programming and operator setup. Chip control and application scope for efficient turning The single-sided chipbreaker is tailored to general turning tasks, supporting effective chip formation across a range of materials. Typical applications include external and internal turning where a combination of edge robustness and finish is required. The insert suits operations where moderate to variable cutting conditions occur, offering productive metal removal rates while maintaining surface quality. For steels, alloyed steels and other common engineering materials, the chip control helps to reduce secondary operations and downtime. Contact Metav Werkzeuge today to match the DCGT 11T301 SH725 to the correct holder and cutting parameters for the intended turning application; our experts provide fast, application‑oriented advice and availability information Technical data Article number: 6737016 SKU: 6737016-Tungaloy Manufacturer SKU: TUN6737016 Model series: ISO‑Drehwendeschneidplatten Material: coated carbide Numbers / Core technical data ISO designation: 11T301 Insert size: 11 mm Insert thickness: 3.97 mm Corner radius: 0.1 mm Clearance angle: 7° Approach/wedge angle: 55° Designs / Special features Shape: rhombic Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning Coating/sort: SH725 (tough, edge‑stable grade) FAQ What clamping systems are compatible with this insert? Clamping compatibility is determined by the insert form and ISO code; the DCGT11T301 SH725 fits standard holders for ISO 11T301 rhombic inserts with matching size, thickness and fastening geometry. Which materials is this grade suitable for? The SH725 grade on the DCGT11T301 insert is formulated for toughness and edge stability, making it suitable for steels, alloyed steels and mixed‑condition turning where interrupted cuts or variable engagements occur. How does the 0.1 mm corner radius affect surface finish? A 0.1 mm corner radius reduces cutting pressure peaks while improving surface quality compared with smaller radii; the radius provides a compromise between finish and edge strength for general turning tasks. Is the insert indexed or single‑use? This is an indexable turning insert designed for multi‑edge indexing; the combination of coated carbide and the chipbreaker supports repeated indexing for continued process stability. Which features support predictable machining results? Standard ISO geometry (11T301), the 7° clearance angle, the 55° approach angle and the single‑sided chipbreaker all contribute to repeatable chip formation and stable cutting conditions when the correct holder and parameters are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T301 SH725 Wendeplatten - Tungaloy
Benefit from the combination of a coated carbide SH725 grade and a 0.1 mm corner radius for consistent surface finish and extended edge life; the ISO geometry ensures straightforward integration into standard toolholders. Order directly via Metav Werkzeuge or request application advice from the sales consultants. DCGT 11T301 SH725 indexable turning insert — rhombic 55° geometry by Tungaloy A DCGT11T301 SH725 indexable insert designed for general turning operations, offering a balanced mix of toughness and edge stability for variable engagement conditions. SH725 coated carbide grade Rhombic insert, 55° included angle 0.1 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Precision and consistent surface quality for turning The rhombic geometry with a 55° included angle delivers a stable cutting edge for both external and internal turning, while the 0.1 mm corner radius reduces the risk of chatter and supports a fine surface finish. Specified as ISO DCGT11T301, the geometry conforms to international holder standards, which simplifies tool selection and reduces setup time. This combination of repeatable geometry and a small corner radius makes the insert especially suitable where dimensional consistency and predictable tool behaviour are required. Robust grade and coating for variable engagement The SH725 grade is a coated carbide designed for toughness and edge stability, giving reliable performance with smaller tools or when cut conditions vary. The coating reduces flank wear and helps maintain a sharp cutting edge under interrupted cuts, which translates into longer effective tool life and fewer indexings. For process planners, this means lower tooling consumption and steadier output quality during mixed-batch production. Secure clamping and geometry details that support productivity Clamping integrity is aided by the cylindrical hole with a one-sided countersink (40°–60°), together with a plate thickness of 3.97 mm, which together ensure stable seating in compatible holders. The insert’s 7° clearance helps prevent rubbing on the workpiece while maintaining cutting efficiency. These measurable parameters inform fixture selection and torque specifications for secure fastening, reducing the likelihood of vibration-related wear and improving cycle-to-cycle reproducibility. Practical application guidance and system compatibility The single-side chipbreaker design makes the insert suitable for a range of chip-formation conditions; pairing the single-side chipbreaker with the correct grade and geometry supports controlled chip flow and easier chip evacuation. Used in a standard ISO turning system — insert, matching external holder or boring bar, shim/seat and clamping screw — the component integrates into most production lines without complicated adapter work. For optimised results, match the chipbreaker and SH725 grade to the workpiece material and cutting parameters. Contact Metav Werkzeuge for tailored application advice on the DCGT11T301 SH725 insert or to discuss delivery and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6737015 Manufacturer SKU: TUN6737015 Metav SKU: 6737015-Tungaloy Model series: ISO turning inserts Numbers / Core technical data Corner radius: 0.1 mm Included angle: 55° Clearance angle: 7° Thickness: 3.97 mm Size: 11 Designs / Special features Rhombic insert form With cylindrical hole and one-sided countersink (40°–60°) Single-side chipbreaker Coated carbide, grade SH725 Intended use: turning Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness FAQ What turning tasks is this insert designed for? The DCGT11T301 SH725 insert is intended for external and internal turning operations where a durable, edge-stable coated carbide is required; it is especially effective in smaller tools or varying engagement conditions. Which holders are compatible with the ISO DCGT11T301 geometry? Compatibility is determined by the holder’s form, clearance angle, tolerance class, fastening method, size and plate thickness; holders that accept ISO DCGT 11T301 inserts will fit the DCGT11T301 SH725 insert. How does the SH725 grade affect performance? SH725 is a tough, coated carbide grade that improves edge stability and resistance to wear, making the insert suitable for interrupted cuts and applications where consistent edge life is important. What role does the 0.1 mm corner radius play in machining? A 0.1 mm corner radius reduces cutting stress concentration and vibration tendency, helping to achieve a finer surface finish while balancing tool strength for light to medium finishing cuts. How is the insert secured in the tool assembly? The insert features a cylindrical hole with a one-sided countersink (40°–60°) and a 3.97 mm plate thickness; these elements support secure seating with the appropriate clamping screw, shim or clamping set in standard ISO toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 SH725 Wendeplatten - Tungaloy
Combine the SH725 tough, edge‑stable grade with the compact rhombic 11 mm geometry and secure cylindrical seating to achieve reliable, repeatable turning under varying engagement conditions; order the insert directly via Metav Werkzeuge or contact the consultants for application guidance DCGT 11T301 SH725 indexable insert for turning — Tungaloy A DCGT 11T301 SH725 indexable turning insert designed for ISO‑standard holders, offering a tough coated carbide grade for stable cutting edges and productive machining in variable engagement situations Coated carbide insert SH725 grade Rhombic 11 mm geometry, 0.1 mm radius 7° clearance angle, ISO compatibility Cylindrical hole with 40°–60° countersink Robust grade for consistent cutting performance The SH725 designation indicates a coated carbide grade engineered for toughness and edge stability, which helps maintain cutting performance when conditions change. In practice, this means fewer unplanned indexings and more consistent cycle times on batch production. The tough microstructure of the grade absorbs intermittent loads and reduces chipping on narrow tools, making it particularly suitable for smaller toolholders and operations where entry conditions can vary. The result is improved uptime and a more predictable production flow. ISO conformity for straightforward tool integration The insert follows ISO geometry rules, so compatibility with an external holder is determined by form, clearance angle, tolerance class, clamping method, size and thickness. With an 11 mm inscribed circle and a thickness of 3.97 mm, the geometry is compact yet robust. The 7° clearance angle and 0.1 mm corner radius provide a balance between strength and finish quality, while the cylindrical hole with a 40°–60° countersink ensures secure seating and correct axial positioning in ISO clamping systems. This standardisation reduces setup complexity and shortens tool change procedures. Versatile chip control and application range Equipped with a one‑sided chipbreaker, the insert supports controlled chip formation for a wide range of turning tasks. Selecting the appropriate chipbreaker style and the SH725 grade in conjunction with workpiece material and machining stability delivers better surface finish and more predictable swarf behaviour. The rhombic shape enables both external and internal turning options when the holder geometry allows, offering flexibility in workshop layouts. For operations with frequent tool reversals or mixed batches, this adaptability contributes to operational efficiency. Lower lifecycle costs through dependable indexing Use of a high‑toughness coated carbide insert reduces the frequency of premature failures, translating into longer tool life and fewer spare‑part requirements. The insert’s standardised form and secure clamping minimise the risk of incorrect seating and support consistent cutting geometry after each index. These factors combine to lower total cost per part and simplify inventory: a compact, ISO‑conforming indexable insert that supports steady productivity and predictable maintenance intervals. For application advice or to procure the DCGT 11T301 SH725 indexable insert from Tungaloy, contact Metav Werkzeuge for tailored recommendations and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6838678 Manufacturer SKU: TUN6838678 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Numbers / Core technical data Inscribed circle: 11 mm Thickness: 3.97 mm Clearance angle: 7° Corner radius: 0.1 mm Included angle: 55° Designs / Special features Rhombic plate form Cylindrical hole with one‑sided countersink (40°–60°) One‑sided chipbreaker Coated carbide grade SH725 ISO‑standard insert for turning FAQ What turning tasks is this insert suited for? The DCGT 11T301 SH725 indexable insert is intended for a broad range of turning operations; the tough SH725 grade performs well where edge stability and resistance to intermittent loads are required. How does the insert ensure secure clamping in ISO holders? A cylindrical hole combined with a 40°–60° countersink provides reliable axial positioning and seating, which supports consistent clamping in ISO‑compliant toolholders. Can the same insert be used for external and internal turning? The rhombic geometry allows both external and internal turning applications when paired with a suitably configured holder; the one‑sided chipbreaker should be matched to the workpiece and cutting conditions. How should the chipbreaker and grade be selected for difficult materials? Choose the chipbreaker and the SH725 grade according to material type, stability of the setup and cutting parameters; the SH725 grade offers toughness and edge stability for variable engagement, while the chipbreaker controls swarf and surface finish. What are the main benefits of using this indexable insert in production? Benefits include predictable cutting performance, reduced downtime through fewer indexings, and standardised integration with ISO holders, all contributing to improved productivity and lower lifecycle costs. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T301 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of reliable edge stability, ISO compatibility and compact geometry for predictable turning performance; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DCGT 11T301 SH730 ISO turning insert for turning — Tungaloy A DCGT11T301 SH730 indexable turning insert engineered for external and internal turning where stable cutting edges and compact tool sizes are required Coated cemented carbide SH730 grade ISO‑standard rhombic insert, 11 mm size 0.1 mm corner radius with 7° relief angle Cylindrical hole with 40°–60° countersink Engineered for reliable turning under varying engagement The SH730 grade is a coated cemented carbide designed to deliver edge stability and durable cutting performance, especially in smaller tooling configurations or when engagement conditions change. The formulation of the grade emphasises toughness and resistance to chipping, which reduces unplanned tool changes and supports longer productive runs. As an ISO turning insert, it provides a consistent datum and repeatable seating in ISO‑compatible holders, translating material properties into measurable productivity gains and lower overall machining costs. Precision geometry for predictable seating and chip control Rhombic geometry and ISO conformity ensure the insert seats reliably in the toolholder; compatibility is determined by form, free angle, tolerance class, fastening, size and thickness. The insert measures 11 mm in the standard size class, with a plate thickness of 3.97 mm, a 0.1 mm corner radius and a 7° relief angle. The cylindrical hole with a one‑sided countersink (40°–60°) secures the insert and supports consistent clamp force, which helps maintain cutting stability and repeatable part quality. These dimensional choices balance rigidity and accessibility for a wide range of turning set‑ups. Practical process benefits and clear handling guidance A one‑sided chipbreaker on the insert promotes controlled chip formation in typical turning operations and simplifies orientation decisions during tool assembly. For turning tasks that require frequent index changes or that place variable loads on the cutting edge, the coated cemented carbide SH730 grade offers a compromise between wear resistance and fracture toughness. The ISO labelling and standardised form make tool selection and stocking straightforward, while the compact rhombic shape supports both external and internal turning operations with efficient material removal and consistent surface quality. For process optimisation and order placement contact Metav Werkzeuge for tailored recommendations on holders and cutting data; Metav Werkzeuge can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6853996 SKU: 6853996-Tungaloy Manufacturer SKU: TUN6853996 Model series: ISO turning inserts ISO designation: 11T301 Application: Turning Core dimensions Size: 11 mm Thickness: 3.97 mm Corner radius: 0.1 mm Relief angle: 7° Included angle: 55° Design & features Material: coated cemented carbide Grade: SH730 Plate form: rhombic Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: one‑sided ISO‑standardised insert for compatibility with matching holders FAQ What applications suit this insert best? The insert is intended for turning operations, both external and internal, where an ISO‑standard rhombic insert and a coated cemented carbide SH730 grade are advantageous. How is compatibility with a toolholder ensured? Compatibility depends on form, free angle, tolerance class, fastening, size and thickness; the ISO designation 11T301 helps match the insert to ISO‑compatible holders. What are the advantages of the SH730 grade? SH730 is a tough, edge‑stable grade developed for turning, particularly effective in smaller tools or when engagement conditions vary, providing reduced chipping and stable performance. How does the hole and countersink affect fixing? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and correct seating, which supports cutting stability and consistent repeatability. What does a 0.1 mm corner radius mean for surface finish? A 0.1 mm corner radius offers a balance between edge strength and the ability to achieve good surface finish; it is commonly used where a compromise between finish and tool life is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T301 TH10 Wendeplatten - Tungaloy
DCGT11T301 TH10 Tungaloy-Wendeplatte für Drehen Die DCGT11T301 TH10 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte, entwickelt für Außen- und Innendrehen und speziell ausgelegt auf saubere Oberflächen bei Nichteisenwerkstoffen DCGT11T301 TH10 von Tungaloy Unbeschichteter Hartmetall-Schneidstoff Einseitiger Spanbrecher für saubere Späne Rhombische Form, 11 mm Größe Zylindrisches Loch mit Senkung 40°–60° Robuste Schneidleistung durch unbeschichtetes Hartmetall Die Wendeplatte basiert auf Hartmetall, das in der Variante unbeschichtet verarbeitet ist, um besonders scharfe Schneidkanten zu ermöglichen. Diese Ausführung reduziert Schnittkräfte und sorgt für feinere Oberflächen bei weichen bis mittelharten Werkstoffen. Die Sorte TH10 bietet eine universelle Balance zwischen Zähigkeit und Schneidhaltigkeit, wodurch die Platte in vielen Alltagssituationen der Zerspanung zuverlässig arbeitet. Vielseitiger Einsatzbereich und ISO-Kompatibilität für den Produktionsalltag Dank der ISO-Normierung lässt sich die Platte problemlos in gängigen Haltersystemen einsetzen; entscheidend sind dabei Form, Freiwinkel und Toleranzklasse. Ein Freiwinkel von 7° und der Winkel von 55° unterstützen stabile Schnittbedingungen bei Außen- und Innendrehen. Anwender profitieren von standardisierter Austauschbarkeit und einfacher Lagerhaltung bei variierenden Produktionsaufträgen. Präzise Spanbildung und konstruktive Details für saubere Ergebnisse Der einseitige Spanbrecher ist auf kontrollierte Spanabfuhr optimiert und reduziert Nacharbeiten bei empfindlichen Werkstoffen. Die rhombische Plattenform kombiniert Schnittpräzision mit Flexibilität, das zylindrische Loch plus einseitige Senkung (40°–60°) gewährleistet sichere Befestigung und reproduzierbare Positionierung im Halter. Der Eckenradius von 0,1 mm eignet sich für feine Konturen und präzise Kantenbearbeitung. Auswahlkriterien und praktische Hinweise zur Anwendung Bei der Auswahl des passenden Halters sind Plattendicke (3,97 mm), Plattengröße (11 mm) und Befestigungsart entscheidend für die Performance. Der Systemaufbau besteht aus der ISO-Drehplatte, einem passenden Außenhalter oder Bohrstange sowie Unterlage/Klemmsatz und Ersatzschrauben. Für Produktionslinien mit häufigem Materialwechsel empfiehlt sich die Kombination aus standardisierten Platten und definierten Halterfamilien zur Minimierung von Stillstandszeiten. Empfehlung: Die Tungaloy DCGT11T301 TH10 Wendeplatte eignet sich besonders für präzise Zerspanung an Nichteisenwerkstoffen; technische Beratung und Bestellung über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6802819 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DCGT11T301 TH10 Tungaloy-Wendeplatte Fakten Eckenradius: 0,1 mm Winkel: 55° Freiwinkel: 7° Plattendicke: 3,97 mm Plattengröße: 11 mm Hersteller SKU: TUN6802819 Besonderheiten Material: Hartmetall Sorte: TH10 (scharfe Universalsorte für Nichteisenwerkstoffe) Spanbrecher: einseitig Plattenform: rhombisch Loch: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen ISO-Code: 11T301 (Form und Freiwinkel nach ISO-Norm) FAQ Für welche Werkstoffe ist die Wendeplatte geeignet? Die DCGT11T301 TH10 Wendeplatte von Tungaloy ist primär für Nichteisenwerkstoffe konzipiert und eignet sich besonders, wenn niedrige Schnittkräfte und saubere Oberflächen gewünscht sind. Warum wird unbeschichtetes Hartmetall verwendet? Unbeschichtetes Hartmetall reduziert Reibung bei Schnittbeginn, ermöglicht schärfere Schneidkanten und unterstützt bei der DCGT11T301 TH10 eine bessere Oberflächenqualität bei weichen Werkstoffen. Wie beeinflusst der einseitige Spanbrecher das Ergebnis? Der einseitige Spanbrecher sorgt für kontrollierte Spanabfuhr und vermindert Faserzug oder Aufrauen, was bei der Bearbeitung empfindlicher Materialien die Nacharbeit reduziert. Welche Haltereigenschaften sind bei der Montage zu beachten? Kompatible Halter müssen Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke der Platte berücksichtigen, damit die DCGT11T301 TH10 sicher und präzise gespannt ist. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die Plattengeometrie und der Winkel von 55° machen die DCGT11T301 TH10 universell einsetzbar für Außen- und Innendreharbeiten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGT 11T301 TH10 Wendeplatten - Tungaloy
Take advantage of a proven combination of precise geometry, a sharp uncoated cutting grade and secure clamping for reliable turning operations; order the DCGT11T301 directly via Metav Werkzeuge or consult the technical specialists if further application guidance is required. DCGT 11T301 TH10 turning insert for turning — Tungaloy A DCGT11T301 TH10 rhombic turning insert designed for ISO-compliant external and internal turning, optimised for low cutting forces and clean surface finishes when machining non-ferrous materials. Sharp uncoated carbide grade TH10 Rhombic insert, 55° cutting geometry 0.1 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent geometry that supports repeatable surface quality The DCGT11T301 combines a rhombic outline with a 55° geometry to deliver a predictable cutting edge for both external and internal operations. The uncoated carbide composition and the TH10 grade are selected to keep cutting forces low, which reduces tool pressure on the workpiece and helps achieve a clean surface finish with fewer secondary operations. ISO conformity ensures comparability across systems while the defined wedge and relief angles contribute to dimensional stability during adaptable turning tasks. Low cutting forces and chip control for efficient production A sharp, uncoated grade reduces the energy required at the cutting edge and supports efficient material removal in non-ferrous components. The 0.1 mm corner radius is suited to fine finishing, limiting edge build-up and aiding accuracy in tight-tolerance runs. Chip management is enhanced by the single-sided chipbreaker, which, together with the insert’s form and the specific grade, assists in producing manageable chips and shortening cycle times for repetitive batches. Secure mounting and quick changeovers for workshop productivity Designed as part of a complete system—ISO insert, matching external holder or boring bar, support/clamp set and replacement screws—compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. The cylindrical hole with a single-sided countersink (40°–60°) provides stable clamping, while the 3.97 mm thickness improves rigidity under varying cutting conditions, reducing vibration and supporting repeatable part quality during frequent tool changes. Application guidance and material suitability for reliable results This insert is intended primarily for turning of non-ferrous materials and for operations where an uncoated cutting edge supports low cutting forces and good surface integrity. Typical uses include both external and internal turning; the choice of chipbreaker and the TH10 grade should be matched to workpiece material, machining type and machine-tool stability. For applications requiring different thermal or wear properties, a coated grade may be preferable, whereas this configuration excels where minimal cutting resistance and clean finishes are priorities. Contact Metav Werkzeuge for sample availability, matching holders and detailed application advice on the TH10 grade; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6802822 Manufacturer SKU: TUN6802822 SKU: 6802822-Tungaloy Manufacturer: Tungaloy Facts Designation: DCGT11T301 ISO code: 11T301 Size: 11 mm Thickness: 3.97 mm Corner radius: 0.1 mm Relief angle: 7° Wedge angle: 55° Special features Material: carbide Grade: TH10 (uncoated) Plate form: rhombic Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning; external and internal turning Series: ISO turning inserts FAQ Is this insert suitable for stainless steel machining? The DCGT11T301 TH10 turning insert is optimised for non-ferrous materials; as an uncoated grade it delivers low cutting forces and clean finishes but is not recommended as the first choice for stainless steel where coated, wear-resistant grades are typically preferable. Which holder characteristics ensure compatibility with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; use an ISO-compliant external holder or boring bar that accepts a DCGT 11T301 shape and secures the insert via the cylindrical hole and countersink. Can the insert be used for internal turning operations? Yes — the insert’s geometry and ISO conformity make it suitable for both external and internal turning, provided that the selected holder and machine setup ensure sufficient rigidity and appropriate chip evacuation. How does the TH10 grade affect machining performance? The TH10 grade offers a sharp, uncoated cutting edge that reduces cutting forces and improves surface finish on suitable materials; it is especially effective in applications where minimal cutting resistance and clean part surfaces are priorities. What clamping features are built into the insert to ensure secure mounting? The DCGT11T301 includes a cylindrical hole with a single-sided countersink (40°–60°) designed to work with standard clamping systems, providing stable engagement and reliable repeatability during indexable insert changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 AH725 Wendeplatten - Tungaloy
Combine the AH725 grade's process security with the PVD-coated carbide construction to achieve consistent turning results and long tool life; order the DCGT11T302 AH725 Tungaloy insert directly via Metav Werkzeuge or consult their specialists for mounting compatibility and cutting-data advice. DCGT 11T302 AH725 — Turning insert, PVD-coated carbide by Tungaloy The DCGT11T302 AH725 is an ISO-compliant rhombic turning insert designed for reliable external and internal turning where material mix and process stability are critical. PVD-coated carbide for reliable wear resistance Universal AH725 grade for Stahl and rostfreier Stahl ISO-compliant 55° geometry, 7° relief One-sided chipbreaker with 0.2 mm corner radius Reliable performance across mixed materials The AH725 grade combines a PVD-coated surface with a robust carbide substrate to deliver dependable performance when machining a variety of workpieces. This universal grade is engineered for applications involving Stahl and rostfreier Stahl, where frequent changes in material or smaller tool sizes demand stable cutting behaviour. The coating improves wear resistance and edge life, which reduces the need for frequent index changes and supports a smoother production flow. By choosing a universally applicable grade, process planning is simplified and tool inventories can be optimised. Precise fit and repeatable clamping for stable turning Compatibility is determined by geometry, relief, tolerance class, fastening and plate dimensions; the rhombic shape with 55° geometry and 7° relief ensures a predictable seating position and cutting angle in ISO holders. The insert’s 3.97 mm thickness and standard dimensions facilitate secure clamping and minimised runout. A correctly seated insert reduces vibration and tool deflection, which directly improves surface finish and dimensional repeatability. The ISO-compliant design also eases replacement and reduces setup times during batch changes, raising overall workshop efficiency. Controlled chip formation and improved surface quality The one-sided chipbreaker on this insert is matched to moderate feeds and finishing passes, promoting compact chip forms and steady evacuation under typical turning conditions. The corner radius 0.2 mm supports fine contour work and reduced cutting forces during light cuts, while the insert geometry helps maintain a stable edge under intermittent cuts. Together these aspects contribute to a consistent surface finish and lower risk of built-up edge. For operations prioritising process security and repeatability, the combination of chip control and small radius makes this insert suitable for detailed external and internal turning tasks. For supply, compatibility checks or cutting-data recommendations for the Tungaloy AH725 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application-oriented support and quick delivery. Technical data Article number: 6857017 SKU: 6857017-Tungaloy Manufacturer SKU: TUN6857017 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 11T302 Type: DCGT11T302 AH725 Tungaloy-Wendeplatte Facts Geometry angle: 55° Relief angle: 7° Corner radius: 0.2 mm Size: 11 Thickness: 3.97 mm Special features Material: Hartmetall Coating / grade: AH725 (PVD-coated) Chipbreaker: einseitig Hole: mit Loch — zylindrisches Loch + einseitige Senkung (40°–60°) Typical application: Drehen (external and internal turning) FAQ What materials is this insert suitable for? The DCGT11T302 AH725 insert is specified for machining Stahl and rostfreier Stahl and performs well where material mixes demand a universal, breakage-resistant grade. How does the AH725 grade benefit mixed-production runs? The AH725 PVD-coated carbide provides enhanced wear resistance and edge stability across varying workpiece materials, reducing index changes and supporting continuous production. Which holder characteristics determine compatibility? Compatibility depends on holder form, 55° geometry, relief angle (7°), tolerance class, fastening type, plate size and thickness; matching these ensures correct seating and clamping. Is the insert suitable for finishing passes? Yes — the 0.2 mm corner radius and the one-sided chipbreaker are optimised for light finishing cuts and deliver consistent surface quality when used with appropriate feeds and speeds. Does the insert include a mounting hole and countersink? The insert features a cylindrical hole with a single-sided countersink (40°–60°), designed for standard ISO clamping systems to ensure secure fixation and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 AT9530 Wendeplatten - Tungaloy
High-performance DCGT 11T302 AT9530 indexable insert combines a coated cermet cutting grade and a fine 0.2 mm corner radius for superior finishing and uniform wear; its 55° rhombic geometry and ISO-compliant design ensure accurate engagement in turning operations. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored advice. DCGT 11T302 AT9530 indexable insert for turning (rhombic, 55°) by Tungaloy The DCGT 11T302 AT9530 is an ISO-compliant, rhombic turning insert designed for finishing and light machining of steel, optimised for surface quality and even wear. Coated cermet grade AT9530 for superior surface finish 55° rhombic geometry for precise turning engagement 0.2 mm corner radius for consistent, fine edges Cylindrical hole + 40°–60° countersink for secure clamp Enhanced finishing and consistent tool life for turning processes The combination of a coated cermet grade and a compact geometry delivers measurable improvements in surface quality and tool life during finishing cuts. The AT9530 grade is formulated to reduce adhesion and provide even wear, which helps maintain consistent component tolerances across a production run. As an ISO-format cutting solution, this insert supports predictable machining results when matched with the correct holder, minimising process variation and reducing rework. The result is a reliable finishing performance that supports efficient shop-floor throughput. Secure clamping and ISO compatibility for reliable setup Compatibility with holders is determined by form, clearance angle, tolerance class, clamping method, size and thickness; this insert adheres to ISO norms to support straightforward integration. The cylindrical hole with a one-sided countersink (40°–60°) provides positive seating and stable clamping, while the 55° rhombic shape balances axial engagement and chip evacuation. With a thickness of 3.97 mm, a nominal size of 11, and a 0.2 mm corner radius, the geometry is tailored to finishing and light turning operations where stability and repeatability are required. Improved productivity through material engineering and chip control The cutting concept combines a carbide substrate with a coated cermet top layer to obtain both toughness and a fine cutting edge. Cermet offers a ceramic-rich surface that resists built-up edge formation and promotes a high-quality surface finish, while the underlying carbide provides core strength. The single-sided chipbreaker design supports controlled chip formation during low-to-moderate feed finishing, which reduces the risk of edge damage and shortens secondary operations such as deburring. This balance of edge quality and chip control translates into higher first-pass yield and more consistent productivity. For applications that prioritise surface quality and stable wear, contact Metav Werkzeuge for advice on integrating Tungaloy’s AT9530 inserts into existing turning setups or to request a technical recommendation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6846145 SKU: 6846145-Tungaloy Manufacturer SKU: TUN6846145 Model series: ISO indexable turning inserts Material: carbide Cutting grade: AT9530 (coated cermet) Intended use: turning Numbers / Core technical data Insert designation: DCGT11T302 ISO code: 11T302 Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 55° Designs / Special features Rhombic insert shape Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker ISO-compliant geometry for holder compatibility Suitable for finishing and light machining of steel FAQ Which materials are suitable for this insert? The insert is optimised for finishing and light machining of steel; the AT9530 coated cermet promotes high surface quality when used on typical steel grades. What holder characteristics are required for correct use? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; holders matching ISO DCGT11T302 geometry and a secure clamping seat for the cylindrical hole are recommended. How does the AT9530 grade improve surface finish? The AT9530 coating reduces adhesion and promotes uniform wear, while the cermet surface helps form a fine edge that produces improved surface finish in finishing operations. Is the insert suitable for heavy roughing? This insert is designed for finishing and light machining; for heavy roughing, a different geometry or tougher grade would be more appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 GT9530 Wendeplatten - Tungaloy
Benefit from the GT9530 coated cermet grade and the precise 0.2 mm corner radius for superior surface finish and longer tool life — order the DCGT11T302 GT9530 insert directly via Metav Werkzeuge or ask the consultants if needed. DCGT 11T302 GT9530 — Turning insert by Tungaloy, coated cermet for finishing A DCGT11T302 GT9530 ISO-conforming turning insert designed for external and internal turning, offering a coated cermet grade for improved wear resistance and a fine surface finish. ISO-conforming rhombic insert, 11 mm Coated cermet grade GT9530 0.2 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Higher process consistency and extended tool life for finishing The GT9530 grade is a coated cermet formulation optimised for finishing and light universal turning of steel, delivering a balance of wear resistance and surface quality. The small 0.2 mm corner radius reduces cutting forces while preserving edge strength, making the geometry particularly suitable for stable set-ups where a superior surface finish is required. With an included angle of 55° and a 7° relief angle, the geometry supports predictable chip formation and reduced vibration, which together lower the risk of rework and increase uptime. Clear selection guidance for typical turning tasks Intended for both external and internal turning, the insert matches applications where a fine surface and reliable tool life are priorities. The single-sided chipbreaker and the GT9530 coating promote controlled chips under steady cutting conditions, so the grade is recommended where stability and consistent part quality matter. Selection should be aligned to machine power, clamping rigidity and workpiece material; choosing the correct chipbreaker and grade helps to reduce maintenance intervals and overall production costs while maintaining component tolerances. Fast interchangeability and secure clamping for production environments As an ISO-conforming plate, interchangeability with compatible holders is straightforward, provided the form, relief angle, tolerance class, fastening method, size and thickness align. The insert features a cylindrical hole with a single-side countersink (40°–60°) for reliable fastening and repeatable positioning in the cutter body. The plate thickness of 3.97 mm and the 11 mm size support stable clamping and reduce micro-movements during high-precision finishing. Clear labelling and standard geometry simplify stocking and shorten set-up times across multiple machines. For reliable finishing with the GT9530 grade, contact Metav Werkzeuge for ordering or technical advice — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6997869-Tungaloy Manufacturer SKU: TUN6997869 Manufacturer article number: 6997869 Model series: ISO-Drehwendeschneidplatten Label: DCGT11T302 GT9530 Tungaloy-Wendeplatte Core data Size: 11 mm Plate thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° SKU: 6997869-Tungaloy Special features Coated cermet grade GT9530 Rhombic plate form Single-sided chipbreaker With hole: cylindrical hole + single-side countersink (40°–60°) ISO-conforming turning insert Typical application: turning (external and internal) Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What workpieces is this insert best suited for? The DCGT11T302 GT9530 Tungaloy turning insert is optimised for steel finishing and light universal turning where a fine surface and extended life are required. How does the GT9530 coating affect performance? GT9530 is a coated cermet grade designed to improve wear resistance and surface quality; in practice the coating extends runtime and helps achieve consistent finishes on machined steel. Which holder features must be checked before fitting the insert? Compatibility requires matching the plate form, relief angle (7°), tolerance class, fastening method, plate size (11 mm) and thickness (3.97 mm) to the holder to ensure secure clamping and correct cutting geometry. What benefits does the 0.2 mm corner radius provide? A 0.2 mm corner radius balances cutting-edge strength with reduced cutting forces, enabling finer surface finishes and predictable tool behaviour during stable turning operations. What fastening detail should be observed for secure mounting? The insert has a cylindrical hole with a single-side countersink (40°–60°); correct screw and clamping parts must be used to guarantee repeatable seating and minimise micro-movement during cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 J740 Wendeplatten - Tungaloy
Combining ISO-standard geometry, Tungaloy J740 carbide and a single-sided chipbreaker delivers reliable chip control and consistent tool life for turning operations. The rhombic 55° form with a 0.2 mm corner radius supports accurate external and internal turning while maintaining cutting-edge stability. Order the DCGT11T302 insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCGT 11T302 J740 indexable turning insert — rhombic 55° geometry, Tungaloy The DCGT11T302 J740 is an ISO-standard indexable insert designed for general turning applications, offering a balance of wear resistance and edge stability for productive machining. *ISO indexable insert, rhombic 55° geometry *Tungaloy grade J740, wear-resistant carbide *Single-sided chipbreaker for turning stability *Hole with countersink 40°–60°, compatible mounting Stable chip control for uninterrupted production The combination of a single-sided chipbreaker and Tungaloy J740 cutting material is engineered to provide predictable chip formation and reduced edge chipping. The chipbreaker geometry helps evacuate swarf efficiently in many turning scenarios, which lowers the risk of workpiece damage and tool-induced vibration. For operations requiring steady metal removal rates, the insert’s design contributes to steady cycle times and less frequent insert changes, supporting higher overall productivity. Geometry that supports consistent surface quality A rhombic 55° geometry with a corner radius of 0.2 mm and a 7° relief angle provides a controlled cutting edge that reduces deflection on slender parts and small-diameter features. The moderate corner radius helps to improve component finish while limiting cutting forces, making the insert well suited to precision external and internal turning tasks. The 3.97 mm plate thickness adds rigidity at the cutting edge, improving repeatability across batches and maintaining dimensional accuracy. Simple integration into ISO turning systems Mounting compatibility is simplified by the ISO-standard form and the cylindrical hole with a one-sided countersink (40°–60°). Compatibility with a holder is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure seating and repeatable clamping. The rhombic form and hole style make the insert suitable for common external holders and boring bars that accept ISO indexable plates with equivalent specifications. Versatile use and selection guidance Engineered for turning, the insert performs in both external and internal operations when paired with an appropriate holder and machining parameters. The carbide substrate and the J740 grade are selected to combine wear resistance and adequate toughness for stable cutting; however, optimal results require choosing a chipbreaker and cutting data matched to the workpiece material and machine rigidity. The insert fits into modular systems consisting of the plate, a matching external holder or boring bar, and the necessary clamp set and screws, allowing straightforward replacement and inventory management. For application-specific selection or to secure Tungaloy’s DCGT11T302 J740 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical advice and supply. Technical data Article number: 6802827 Manufacturer SKU: TUN6802827 SKU: 6802827-Tungaloy Model series: ISO indexable turning inserts Designation: DCGT11T302 Type: DCGT Manufacturer: Tungaloy Material: Carbide Grade: J740 Core specifications Plate size: 11 Plate thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Cutting angle: 55° Hole/countersink: cylindrical hole + one-sided countersink 40°–60° Design & special features Rhombic plate form Single-sided chipbreaker ISO-standard geometry Intended application: turning (external and internal) Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness FAQ What is the main application of this insert? The DCGT11T302 J740 indexable insert is intended for turning tasks, covering both external and internal turning when used with a suitable holder and clamping set. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert improves chip control and helps maintain stable cutting conditions, which contributes to consistent surface finish and reduced risk of tool edge failure. Which standards determine holder compatibility? Compatibility is governed by the insert form, relief angle, tolerance class, fastening method, size and thickness; the DCGT11T302 uses ISO-standard geometry and a cylindrical hole with a one-sided countersink (40°–60°) for secure mounting. Can this insert be used for precision finishing? Yes; the 55° rhombic geometry combined with a 0.2 mm corner radius and 3.97 mm thickness supports precision turning with reliable surface quality when cutting parameters are optimised. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 J740 Wendeplatten - Tungaloy
Take advantage of the combination of precise 55° rhombic geometry, the wear‑resistant J740 grade and a fine 0.2 mm nose radius for consistent turning performance; order directly via Metav Werkzeuge or consult our specialists for application guidance. DCGT 11T302 J740 indexable turning insert (55° rhombic) — Tungaloy The DCGT11T302 J740 is an ISO‑standard rhombic insert for external and internal turning, engineered to deliver stable cutting edge performance in a wide range of machining situations. *ISO‑standard 55° rhombic geometry *J740 carbide grade for wear resistance *0.2 mm nose radius for fine profiling *Cylindrical hole with 40°–60° countersink Precision geometry for consistent chip control and surface quality The combination of a 55° rhombic geometry and a one‑sided chipbreaker provides controlled chip formation and reliable contact conditions at the cutting zone. This geometry concentrates cutting forces in a stable manner, which reduces vibration and improves surface finish during both light finishing passes and heavier interrupted cuts. The insert is manufactured to ISO tolerances, ensuring repeatable mounting in compatible toolholders and predictable process behaviour across different machines and set‑ups. Durable carbide grade that extends tool life and edge stability The J740 grade, supplied by Tungaloy, is a purpose‑designed cemented carbide formulation that balances wear resistance with sufficient toughness for demanding turning tasks. Combined with a refined cutting edge and a 0.2 mm nose radius, the grade helps maintain dimensional accuracy and prolongs service intervals, particularly on operations where edge stability matters. The plate thickness of 3.97 mm supports rigidity in the clamping system and contributes to consistent chip flow and longer usable life of the cutting edge. System compatibility and easy integration into machining setups Compatibility with toolholders is determined by form, 7° relief angle, tolerance class, fastening method, size and thickness; the insert includes a cylindrical hole with a single‑side countersink (40°–60°) to match common clamping systems. The rhombic shape and the specified 11 mm size allow straightforward pairing with suitable external holders or boring bars, plus the full system comprises an outer holder, a locating shim/clamping set and replacement screws for secure assembly. The manufacturer article number and SKU facilitate ordering and replacement within established tooling inventories. For reliable production performance with a Tungaloy J740 turning insert, contact Metav Werkzeuge for availability and tailored technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6802831 Manufacturer SKU: TUN6802831 Model series: ISO turning indexable inserts Brand: Tungaloy Facts Geometry angle: 55° Nose radius: 0.2 mm Plate thickness: 3.97 mm Plate size: 11 Relief angle: 7° Special features Rhombic plate form, 55° One‑sided chipbreaker Cylindrical hole + single‑side countersink (40°–60°) Cemented carbide material Grade: J740 (Tungaloy) Designed for external and internal turning Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness System: compatible outer holder, locating shim/clamping set and replacement screws FAQ What turning tasks is this insert intended for? The DCGT11T302 J740 insert is intended for both external and internal turning where a 55° rhombic form and a controlled chipbreaker are advantageous for surface quality and process stability. How does the J740 grade affect performance? The J740 grade by Tungaloy is a wear‑resistant cemented carbide that offers an optimised balance of toughness and abrasion resistance, improving edge stability and extending tool life in repetitive turning operations. Which holder features are required for correct mounting? Correct mounting requires a holder matching the insert form, 7° relief angle, tolerance class, fastening method, plate size and thickness; the insert’s cylindrical hole with a 40°–60° countersink is compatible with common clamping systems. What role does the 0.2 mm nose radius play? The 0.2 mm nose radius provides a fine profile radius that helps achieve dimensional accuracy and improved surface finish on finishing passes, while still allowing sufficient strength for general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 J740 Wendeplatten - Tungaloy
Combining wear resistance of the J740 grade with rhombic geometry and precise clamping features ensures consistent, high-productivity turning. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. DCGT 11T302 J740 turning insert — rhombic ISO turning insert, 55° — Tungaloy The DCGT11T302 J740 is a rhombic, ISO-standard turning insert for external and internal turning, offering a balanced combination of wear resistance and edge stability for production machining. ISO-standard rhombic insert for turning J740 Tungaloy carbide grade for durability One-sided chipbreaker for reliable chip control Cylindrical hole with single-side countersink (40°–60°) Consistent cutting performance from material and geometry The combination of the J740 carbide grade and the rhombic geometry delivers a stable cutting edge that supports longer tool life and predictable wear behaviour. The grade balances wear resistance and toughness to resist chipping under interrupted cuts while maintaining a sharp cutting edge for good surface finish. Specifying the correct insert geometry reduces machining variability and increases throughput in repetitive turning operations. Secure seating and repeatability for workshop workflows A cylindrical hole with a single-side countersink ensures correct seating and axial location in compatible holders, which translates into repeatable results across insert changes. The ISO interface and standardised form factor make the insert straightforward to integrate into existing tool systems: proper clamping minimises micro-movements and supports dimensional accuracy. Clear tolerance classes and mounting features aid quick tool exchanges and reduce setup time on production lines. Application scope and chip control for efficient machining Designed for a broad range of turning tasks, the insert suits both external and internal turning when matched with an appropriate holder and cutting parameters. The one-sided chipbreaker enhances chip formation for many turning operations, while the modest 0.2 mm corner radius and 7° relief angle offer a compromise between fine surface finish and edge strength. Select the chipbreaker and grade according to the workpiece material and machining stability to maximise productivity and part quality. For application advice or to request a quotation for the DCGT11T302 J740 Tungaloy insert, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6802828 Manufacturer SKU: TUN6802828 Label / SKU: 6802828-Tungaloy Facts Size: 11 mm Thickness: 3.97 mm Relief angle: 7° Corner radius: 0.2 mm Approach angle: 55° Special features Material: Carbide Grade: J740 (Tungaloy) Chipbreaker: One-sided Mounting: with hole; cylindrical hole + single-side countersink (40°–60°) ISO series: ISO turning inserts FAQ What applications is this insert intended for? The DCGT11T302 J740 Tungaloy insert is intended for external and internal turning operations and is optimised for stable, repeatable cutting in production environments. How does the J740 grade affect machining performance? The J740 grade provides a balance of wear resistance and toughness; in the DCGT11T302 J740 insert this supports longer tool life and edge stability under typical turning conditions. Is the insert compatible with standard holders? Compatibility depends on insert form, relief angle, tolerance class, fastening and thickness; the ISO designation and the cylindrical hole with countersink facilitate mounting in standard ISO-pattern holders. Which chipbreaker should be selected for difficult materials? For less stable setups or more difficult-to-cut materials, choose a chipbreaker and cutting parameters that emphasise controlled chip flow; the one-sided chipbreaker on this insert improves chip control in many turning tasks. What are the key dimensional features to check when replacing an insert? Verify insert form (rhombic), size (11 mm), thickness (3.97 mm), relief angle (7°), corner radius (0.2 mm) and the presence of the correct hole and countersink to ensure proper fit and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 J9530 Wendeplatten - Tungaloy
High process stability and extended tool life result from the combination of the J9530 carbide grade and a precise 0.2 mm cutting-edge radius; order the DCGT11T302 J9530 insert directly via Metav Werkzeuge or consult our specialists for application advice. DCGT11T302 J9530 – ISO indexable turning insert (rhombic, 7° relief) by Tungaloy DCGT11T302 J9530 is an ISO rhombic indexable insert designed for external and internal turning, offering a balanced mix of wear resistance and edge stability for reliable production performance ISO rhombic turning insert, size 11 Tungaloy J9530 carbide grade 7° relief, 55° included angle One-sided chipbreaker, 0.2 mm radius Consistent cutting performance for demanding turning The DCGT11T302 insert is engineered to deliver consistent cutting performance in standard turning tasks by combining a proven carbide formulation with a geometry tailored for stability. The J9530 grade complements the insert shape to provide a balanced combination of wear resistance and toughness, which reduces unexpected tool changes and supports continuous production. A nominal 0.2 mm corner radius helps to maintain a reliable contact zone, improving surface finish while lowering the risk of chipping during interrupted cuts. This makes the insert appropriate where predictable tool life and repeatable part quality are priorities. Accurate geometry and simple holder compatibility Designed to ISO dimensions, the rhombic DCGT form and an included angle of 55° permit versatile use across external and internal turning operations. The insert features a central hole with a cylindrical bore and single-side countersink (40°–60°) to ensure secure clamping in compatible holders. With a plate thickness of 3.97 mm and nominal size 11, the component integrates with ISO-standard external holders and boring bars; compatibility is determined by form, relief, tolerance class, clamping style, size and thickness. The 7° relief reduces flank contact, which helps to prevent rubbing and supports stable cutting conditions, especially in medium-duty finishing and semi-finishing passes. Controlled chip formation and process reliability The single-sided chipbreaker on this insert promotes controlled chip formation, which contributes to improved process security and easier chip evacuation in automated and manual turning cycles. The rhombic form combined with the selected grade supports repeatable edge behaviour and reliable performance across a range of typical turning tasks. Handling is straightforward: the ISO shape enables quick indexing to a fresh cutting edge, while the combination of grade and geometry reduces downtime for tool changeovers. In sum, the design focuses on predictable machining results and practical integration into established tool systems. Contact Metav Werkzeuge to discuss Tungaloy inserts and secure the DCGT11T302 J9530 for your machining tasks — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6723933 Manufacturer SKU: TUN6723933 SKU: 6723933-Tungaloy Model series: ISO turning inserts Application: Turning Core technical data Size: 11 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Design & special features Carbide grade: J9530 Material: carbide One-sided chipbreaker Rhombic shape (DCGT) ISO designation: DCGT11T302 With central hole and single-side countersink (40°–60°) Single-sided configuration, suitable for external and internal turning FAQ What machining tasks is this insert intended for? The DCGT11T302 J9530 insert is intended for external and internal turning; the chipbreaker and grade should be selected to suit the workpiece material and the required stability of the machining process. How is the insert secured in the holder? The insert has a central cylindrical hole with a single-side countersink (40°–60°) to allow secure clamping in ISO-compatible holders and boring bars. What advantages does the rhombic DCGT geometry provide? The rhombic DCGT form offers a 55° included angle that supports versatile cutting directions and dependable edge strength; the small 0.2 mm corner radius helps achieve good surface finishes while maintaining edge integrity. Can the insert be indexed during production? Yes, as an ISO indexable insert the DCGT11T302 can be rotated to present a fresh cutting edge, enabling efficient changeover and continued production without in-situ grinding. What identification and ordering numbers should be referenced? Refer to the manufacturer item number 6723933 and the SKU 6723933-Tungaloy when ordering the DCGT11T302 J9530 Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 KS05F Wendeplatten - Tungaloy
Benefit from the combination of ISO‑standard geometry, the KS05F Tungaloy grade and a precise mounting design to ensure consistent edge life and predictable chip control; order directly via Metav Werkzeuge or consult the technical team for optimal selection. DCGT 11T302 KS05F Tungaloy turning insert — ISO rhombic insert with 55° cutting angle The DCGT11T302 KS05F Tungaloy turning insert is an ISO‑standard rhombic insert intended for general turning applications, designed to deliver stable chip formation and reliable cutting‑edge performance in a variety of machining setups. ISO‑standard rhombic insert, 55° cutting angle KS05F Tungaloy grade for wear and edge stability Cylindrical hole with single‑side countersink 0.2 mm corner radius, 3.97 mm plate thickness Consistent geometry for repeatable turning performance The rhombic 55° geometry provides a balanced approach between strength and accessibility, making the insert suitable for both external and internal turning tasks. The combination of the 0.2 mm corner radius and the defined 7° relief angle reduces cutting forces while maintaining edge robustness, which leads to measurable consistency in dimensional results. This geometry supports predictable tool life and helps to reduce downtime by simplifying tool selection and replacement in ISO‑compatible holders. Material grade and chip control that improve productivity The insert is made from carbide and specified with the KS05F Tungaloy grade, which is formulated to balance wear resistance and toughness for prolonged service life. The single‑sided chipbreaker is matched to the grade to optimise chip formation for common turning conditions; this results in smoother surface finishes and fewer interruptions due to poor chip evacuation. Where higher stability is required, the grade supports heavier cuts while retaining cutting‑edge integrity, contributing to a favourable cost‑per‑part ratio in production runs. Fast integration and mounting guidance for workshop use Compatibility with the toolholder depends on form, relief angle, tolerance class, fixings, size and thickness; the insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping and quick seating. The plate thickness of 3.97 mm and the ISO designation ensure interchangeability with matched holders and clamping sets. For reliable assembly, verify holder geometry and tightening torque to maintain repeatable seating and minimise vibration, thereby extending both insert and toolholder life. Application considerations and selection tips Designed primarily for turning, the insert is part of an ISO series where the operator selects the appropriate chipbreaker and grade according to workpiece material and process stability. The KS05F grade complements tool geometry by offering stable performance across a broad range of operations, but matching the chipbreaker style to feed and depth of cut remains essential. For unusual materials or specialised finishes, consult the technical documentation or application specialists to determine the optimal cutting data and strategy. Contact Metav Werkzeuge for application advice, availability and to discuss the Tungaloy DCGT11T302 KS05F insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a consultant. Technical data Article number: 6822281 Facts Corner radius: 0.2 mm Plate thickness: 3.97 mm Cutting angle: 55° Relief angle: 7° Special features Material: carbide Shape: rhombic Mounting: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Grade: KS05F (Tungaloy) Intended use: Turning FAQ What machining tasks is this insert intended for? This indexable insert is intended for general turning operations; the DCGT11T302 KS05F is designed for both external and internal turning with a focus on stable chip control. Which holder features are required for correct mounting? Correct mounting requires a holder that matches the ISO geometry, relief angle, tolerance class and fastening arrangement; the insert uses a cylindrical hole with a single‑side countersink for secure clamping. What are the key dimensions to check when replacing an insert? Check the corner radius (0.2 mm), plate thickness (3.97 mm), cutting angle (55°) and relief angle (7°) to ensure compatibility with the toolholder and desired machining outcome. How does the KS05F grade affect cutting performance? The KS05F grade from Tungaloy combines wear resistance and edge stability to provide longer tool life under varied turning conditions, supporting better surface finish and consistent productivity. Is there advice available for optimising cutting data? Application guidance and recommended cutting parameters are available from Metav Werkzeuge; consult the technical team to match feed, speed and depth of cut to the KS05F grade and chosen chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO conformity for consistent turning results; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DCGT11T302 NS9530 — Tungaloy rhombic turning insert, 11 mm, 0.2 mm corner radius The DCGT11T302 NS9530 is a rhombic ISO turning insert for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous turning and small depths of cut. Rhombic shape, 11 mm size Sharp cermet grade NS9530 for finishing 0.2 mm corner radius for fine surface finish Cylindrical hole with one-sided countersink 40°–60° Achieving consistent, high‑quality surface finishes with cermet technology The rhombic, small‑edge insert is engineered for precision finishing on steel where surface integrity matters. As an uncoated cermet grade, NS9530 delivers a sharp cutting edge and reduced cutting forces, which lowers vibration and helps maintain dimensional stability during continuous cuts. The small corner radius (0.2 mm) produces minimal scallop height, yielding a finer surface without sacrificing tool life. For shops aiming to increase first‑pass quality and reduce rework, this insert provides a predictable path to improved surface finish and shorter downstream processes. Geometry and holder compatibility for reliable tool clamping and repeatability The insert’s ISO DCGT geometry and standardised form ensure compatibility with a wide range of ISO turning toolholders; fit depends on form, relief angle, tolerance class, clamping method, size and thickness. The 11 mm inscribed circle and 3.97 mm thickness offer a stable clamping interface, while the 7° relief angle balances edge strength and chip flow. The central cylindrical hole with a one‑sided countersink (40°–60°) permits secure fastening with standard screws and underplates, aiding repeatable seating and quick indexability. Clear mechanical conformity reduces setup time and supports steady process control on production lines. Application benefits and selection guidelines for productive finishing For turning operations on steel where continuous cuts and small depths of cut are typical, the NS9530 finishing grade is optimised: it provides good surface quality with low cutting forces and stable chip formation. The single‑sided chipbreaker supports controlled chips in finishing passes, and the cermet substrate resists built‑up edge at moderate cutting speeds. Select this insert when the priority is surface finish and dimensional accuracy rather than heavy roughing; combining the insert with a rigid holder and appropriate feeds will extend edge life and maintain consistent results across batches. For tailored recommendations on using Tungaloy cermet inserts in specific turning processes, contact Metav Werkzeuge for application advice and to secure the correct DCGT insert for optimal finishing performance Technical data Article number: 6998049 SKU: 6998049-Tungaloy Manufacturer article number: TUN6998049 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Grade: NS9530 ISO designation: DCGT11T302 Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Dimensions / core data Inscribed circle: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Special features / applications Uncoated cermet finishing grade Single-sided chipbreaker Compatible with ISO turning holders, clamped fastening Intended application: turning (external and internal finishing) Designed for continuous cuts and small depths of cut FAQ What materials is this insert suited for? The DCGT11T302 NS9530 insert is intended primarily for finishing on steel and is optimised for continuous cuts with small depths of cut. Which holder types are compatible with this ISO insert? Compatibility depends on the holder’s form, relief angle, tolerance class, clamping method, size and thickness; the insert is compatible with standard ISO turning holders designed for DCGT inserts. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius reduces scallop height and produces a finer surface finish, making it suitable for applications where improved surface quality is required. Is the insert coated or uncoated? The grade NS9530 is an uncoated cermet finishing grade designed for low cutting forces and a sharp cutting edge. What fastening style does the insert use? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping with standard screws and underplates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 grade and the precise 0.2 mm nose radius for consistently high surface finish and low cutting forces. The combination of uncoated cermet performance and ISO conformity delivers efficient finish turning with minimal setup time — order the insert directly via Metav Werkzeuge or consult our experts for application advice. DCGT 11T302 NS9530 Tungaloy — Turning insert (finish), ISO 11T302 DCGT11T302 NS9530 is an ISO-conforming indexable turning insert for finishing operations on steel, offering a sharp cutting edge and optimised chip control. Uncoated cermet for fine finishing Sharp cutting edge for low cutting forces Rhombic DCGT shape with 7° clearance Single-sided chipbreaker, 0.2 mm radius Consistent finishing thanks to a dedicated cermet grade The NS9530 grade is an uncoated cermet developed for finish turning of steel, delivering a very sharp cutting edge and low cutting forces that promote superior surface quality. Cermet (a ceramic–metal composite) combines ceramic hardness with metallic toughness; this means the insert holds a keen edge longer under continuous, light-depth cuts and produces less built-up edge than many traditional grades. The result is reliable finish performance and reduced rework in parts where surface integrity matters. ISO compatibility and geometric precision for fast tool changes The insert follows ISO specification 11T302 and the DCGT rhombic form, so compatibility with holders is determined by form, clearance, tolerance class, attachment, size and thickness. The 7° clearance angle and standard dimensions support rapid tool change and secure clamping, reducing machine downtime. With a plate thickness of 3.97 mm and ISO sizing, the component fits established tool systems, enabling predictable repeatability across serial production and tooling setups. Geometry tailored to surface quality and chip control A 0.2 mm nose radius combined with a single-sided chipbreaker and a rhombic shape yields fine surface finish while maintaining consistent chip formation. The insert features a cylindrical hole with a single-sided countersink (40°–60°) which ensures secure fastening and correct seating in compatible holders. The modest radius aids in producing dimensionally accurate profiles during finishing passes while the chipbreaker supports effective evacuation when cutting continuous chips. Application focus and machining guidance Designed primarily for turning, this insert performs best in finish operations on steels with small depths of cut and continuous chip flow. Select an appropriate chipbreaker and holder stability according to the workpiece and machining conditions to exploit the grade’s strengths. The insert’s geometry (including the 55° approach angle) supports delicate finishing passes where surface quality and dimensional precision are the priority. For intermittent cuts or heavy roughing, consider different geometries or tougher grades. For high-quality finishing with the Tungaloy NS9530 grade, contact Metav Werkzeuge for precise application advice and availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6998050 Manufacturer SKU: TUN6998050 Model series: ISO turning inserts Type designation: DCGT11T302 Grade: NS9530 Material: uncoated cermet Manufacturer article number: 6998050 Facts Clearance angle: 7° Thickness: 3.97 mm Size: 11 Nose radius: 0.2 mm Approach/wedge angle: 55° Countersink angle: 40°–60° Special features Rhombic plate form (DCGT) Single-sided chipbreaker Cylindrical hole with one-sided countersink Intended application: turning (finish) ISO-conforming insert for standard holders FAQ What steels is the DCGT11T302 NS9530 best suited for? The DCGT11T302 NS9530 insert is optimised for finish turning of a broad range of steels, delivering a sharp edge and low cutting forces that support high surface quality on continuous cuts. How does the uncoated cermet grade NS9530 affect tool life? The uncoated cermet composition of the NS9530 grade maintains a very sharp cutting edge for finishing passes, which can extend effective productive life where cutting temperatures and continuous cuts prevail. Which geometry features support surface finish with this insert? The combination of a 0.2 mm nose radius, single-sided chipbreaker and rhombic DCGT form helps produce fine surface finishes and controlled chips during finishing operations. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO designation 11T302 and its compatibility depends on form, clearance angle, tolerance class, attachment and thickness to match standard holders. Can the DCGT11T302 NS9530 be used for interrupted cuts? The grade and geometry are optimised for continuous finish turning; for severe interrupted cuts or heavy roughing, a tougher grade or different geometry is advised. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com