DCGT 11T304 GT9530 Wendeplatten - Tungaloy
Combine the GT9530 wear-resistant grade with a fine 0.4 mm corner radius for reliable finishing and extended tool life; order directly via Metav Werkzeuge or contact the consultants for machining recommendations. DCGT11T304 GT9530 Tungaloy turning insert — coated cermet, 0.4 mm radius, rhombic 55° The DCGT11T304 GT9530 is an ISO-format rhombic turning insert intended for finishing and light general turning of steel under stable machining conditions. Coated cermet grade GT9530 for long tool life Rhombic 55° geometry for versatile turning 0.4 mm corner radius for fine surface finishes Cylindrical hole with 40°–60° countersink Consistent finishing performance and extended life The combination of the GT9530 coated cermet and the insert geometry delivers a measurable improvement in surface quality during finishing operations. The wear-resistant grade is developed for schlicht- to light universal turning, which means the tool retains its cutting edge longer under steady conditions; this reduces changeover frequency and supports a predictable production rhythm. The fine 0.4 mm corner radius balances cutting stability with minimal cutting forces, producing a smoother workpiece face while keeping vibration low. Explanation: cermet coatings improve wear resistance and heat tolerance compared with uncoated grades, which helps to maintain consistent surface integrity across batches. Stable geometry for predictable chip control and tool life The rhombic 55° plate form, combined with a single-sided chipbreaker, provides controlled chip flow and stable engagement in both external and internal turning. The insert’s 7° clearance and standard ISO shape ensure repeatable contact conditions when paired with compatible holders; this geometric stability translates into predictable tool life and process reliability. In practical terms, stable geometry reduces the need for constant parameter adjustment and supports consistent part tolerances, which is particularly valuable in medium- to high-volume production runs where reproducibility is critical. Easy integration into ISO tooling systems Designed as part of the ISO turning insert family, the plate fits conventional external holders or boring bars provided the form, clearance angle, tolerance grade, attachment method, size and thickness match. The cylindrical hole with a one-sided countersink (40°–60°) facilitates secure clamping and straightforward replacement, while the 3.97 mm plate thickness and nominal size 11 match common toolholder specifications. This compatibility reduces setup time and simplifies inventory management, enabling a smoother workflow on the shop floor. Selecting the right grade and chipbreaker for the application The coated cermet GT9530 is optimised for steel machining when a good surface finish and extended wear resistance are priorities under stable conditions. For more aggressive roughing or unstable setups, alternative grades or chipbreakers may be preferable. The single-sided chipbreaker on this plate is effective for finishing cuts and light turning; choosing this insert supports a process that favours consistent part quality and lower finishing effort. For users less familiar with cermet behaviour, a short trial under controlled parameters is recommended to establish optimal speeds and feeds. Contact Metav Werkzeuge for tailored application advice on the Tungaloy DCGT11T304 GT9530 insert and guidance on selecting the matching holder and cutting data Technical data Article number: 6997870 Manufacturer item number: 6997870 Manufacturer SKU: TUN6997870 Model series: ISO-Drehwendeschneidplatten Label: DCGT11T304 GT9530 Tungaloy-Wendeplatte Facts Inscribed size: 11 Plate thickness: 3.97 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 7° Special features Coating / grade: GT9530 Cutting material type: beschichtetes Cermet Substrate material: Hartmetall Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: external and internal turning; finishing to light universal turning System components: ISO insert, matching external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert suited for? The DCGT11T304 GT9530 insert is intended primarily for steel machining where finishing quality and longer tool life under stable conditions are required. Which holder types are compatible with the insert? Compatibility depends on holder form, clearance angle, tolerance class, attachment method, size and thickness; the plate is designed for standard ISO turning holders and boring bars compatible with a rhombic insert with a 55° included angle. How does the GT9530 grade affect machining? GT9530 is a coated cermet grade optimised for wear resistance and surface finish in finishing and light turning applications, helping to extend edge life and maintain consistent part quality. Is the insert supplied with a chipbreaker? Yes, the plate is equipped with a single-sided chipbreaker designed for controlled chip evacuation during finishing and light turning operations. What are the key dimensions to check before ordering? Confirm the inscribed size (11), plate thickness (3.97 mm), corner radius (0.4 mm), included angle (55°) and the presence of a cylindrical hole with countersink to ensure proper fit in the selected holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 KS05F Wendeplatten - Tungaloy
High wear resistance and stable cutting-edge integrity ensure consistent turning performance; the KS05F grade balances toughness and wear protection while the rhombic 55° geometry and 0.4 mm corner radius enable accurate finishes and versatile applications. Order the DCGT11T304 KS05F Tungaloy indexable insert directly via Metav Werkzeuge or consult their specialists for selection support. DCGT11T304 KS05F Tungaloy indexable insert for turning, rhombic 55° geometry A DCGT11T304 KS05F indexable turning insert designed for ISO-compliant external and internal turning, combining a balanced carbide grade with a single-sided chipbreaker for controlled swarf behaviour Tungaloy KS05F grade for high wear resistance 55° rhombic geometry for versatile turning 0.4 mm corner radius for accurate finishes Cylindrical hole with 40°–60° countersink Proven wear resistance for uninterrupted production The KS05F designation marks a Tungaloy carbide grade engineered to provide a balance of wear resistance and edge stability, making it suitable for demanding turning tasks where tool life and repeatable results are priorities. The composition of the grade delivers controlled abrasion resistance without sacrificing toughness, so gradual wear is predictable and process stability is improved. This results in fewer tool changes, lower setup overheads and a more reliable cycle time for batch production. Geometry that delivers consistent surface quality The rhombic 55° geometry with a 0.4 mm corner radius and 7° relief angle yields a predictable cutting engagement and consistent surface finish on external and internal contours. The acute angle supports versatile approach vectors on turning centres and boring bars, while the small radius helps achieve fine profile definition. Where a precise dimension and a good optical finish are required, this geometry reduces the need for secondary operations and helps maintain tolerance control. Practical mounting and secure clamping for repeatable results Compatibility with toolholders is defined by form, relief angle, tolerance class, fixing method, size and thickness; the ISO designation ensures the insert fits standard holders designed for the DCGT form. The insert is supplied with a cylindrical hole plus a one-sided countersink (40°–60°) for reliable clamping. Combined with the specified plate thickness of 3.97 mm and ISO-compliant dimensions, the insert provides a secure seat that minimises vibration and improves the life of both insert and holder. Productivity benefits and application guidance The single-sided chipbreaker is optimised for turning operations where chip control and stable cutting forces are essential. Selecting the correct chipbreaker and grade for the workpiece material and machining conditions will maximise productivity — the KS05F grade complements the geometry to give a useful compromise between wear resistance and toughness. For systematic integration into a production line, plan holder selection, clamp components and spare screws as part of the tooling system to reduce downtime and ensure immediate replacement when needed. For original Tungaloy quality and technical advice from Metav Werkzeuge, request the DCGT11T304 KS05F indexable insert (SKU 6822282-Tungaloy) or contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com / +49 2822 7131930 for tailored selection support Technical Data Article number: 6822282 SKU: 6822282-Tungaloy Manufacturer SKU: TUN6822282 Model series: ISO-Drehwendeschneidplatten ISO designation: 11T304 Core specifications Included angle: 55° Relief angle: 7° Corner radius: 0.4 mm Plate thickness: 3.97 mm Plate size: 11 Design & special features Material: carbide Grade: KS05F (Tungaloy) Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning System components: ISO insert, compatible outer holder or boring bar, shim/clamping set, replacement screws FAQ What is the primary application for this insert? The DCGT11T304 KS05F Tungaloy indexable insert is intended for ISO‑standard external and internal turning operations and is presented as a reliable choice for general turning tasks. How does the KS05F grade affect tool life? The KS05F grade used by Tungaloy combines wear resistance and toughness, which promotes a stable cutting edge and extends usable life under appropriate cutting conditions. Which holders are compatible with this insert? Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; the ISO designation DCGT11T304 ensures fitment with standard holders designed for rhombic 55° inserts. What does the hole and countersink specification mean for clamping? The cylindrical hole plus a one-sided countersink (40°–60°) provides a secure seating and consistent clamping force, helping to reduce micro‑movement during turning cycles. Can this insert achieve fine surface finishes? Yes, the 0.4 mm corner radius and the rhombic 55° geometry support precise profile definition and improved surface quality, reducing the need for additional finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 NS9530 Wendeplatten - Tungaloy
Product data conflict detected: one entry lists the insert as cemented carbide (Hartmetall) while another specifies an uncoated cermet grade (NS9530). Please verify the source data to ensure accuracy and consistency in the material specifications, as discrepancies like this can lead to confusion or errors in manufacturing processes, procurement decisions, or quality control assessments. It is crucial to cross-check the original documentation or consult with the relevant departments to confirm the correct material type and grade, as this information directly impacts the performance, durability, and suitability of the insert for its intended application.
DCGT 11T304 NS9530 Wendeplatten - Tungaloy
Benefit from the finishing performance of the uncoated cermet NS9530 combined with a 0.4 mm corner radius for consistently superior surface quality and reduced cutting forces. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT11T304 NS9530 ISO indexable turning insert — uncoated cermet finish grade | Tungaloy The DCGT11T304 NS9530 is an ISO‑standard indexable insert for external and internal turning, optimised for fine finishing of steel with low cutting forces and excellent surface quality ISO rhombic insert DCGT 11T304 NS9530 Uncoated cermet for fine finishing 0.4 mm corner radius for smooth surfaces 7° relief angle for low cutting forces Cylindrical hole with 40°–60° countersink Consistent finishing performance for steel turning The finishing grade is based on an uncoated cermet formulation, marked NS9530, which provides a balance of sharpness and wear resistance suited to continuous cutting and small depths of cut. The cutting geometry and the 0.4 mm corner radius produce a finer edge contact that lowers cutting forces and reduces workpiece vibration, resulting in a measurable improvement in surface finish. For operations where dimensional repeatability and minimal post‑process smoothing are essential, this insert delivers the required outcome with predictable results. Secure ISO compatibility and straightforward mounting Designed to the ISO‑standard geometry DCGT11T304, the insert is compatible with holders that match in form, relief angle, tolerance class, fastening type, size and thickness. The 7° relief angle and 3.97 mm thickness are decisive for stable clamping and reliable cutting line placement. The plate’s rhombic outline and its hole configuration — a cylindrical centre hole with a one‑sided countersink (40°–60°) — simplify location and fastening in standard external holders and boring bars, reducing setup time and enabling consistent assembly across production batches. Predictable chip control and durable finish life The single‑sided chipbreaker and the cermet cutting material create a controlled chip formation that suits finishing cuts in steel, maintaining edge integrity under steady feeds. The combination of a sharp, wear‑resistant cutting edge and the single‑sided chipbreaker allows for low cutting forces and minimal flank abrasion, which translates into longer useful life in finishing duties. For non‑specialists: cermet combines ceramic hardness with metallic toughness, delivering good wear resistance while retaining an edge geometry that produces improved surface quality compared with conventional grades. For original Tungaloy NS9530 turning inserts and tailored application advice, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6714356 Manufacturer SKU: TUN6714356 SKU: 6714356-Tungaloy Model series: ISO‑Drehwendeschneidplatten (ISO indexable turning inserts) Plate designation: DCGT11T304 Grade: NS9530 Cutting material: uncoated cermet/carbonitride Application: Turning Core figures Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 3.97 mm Plate size: 11 Included hole: with hole (cylindrical + one‑sided countersink 40°–60°) Lead/approach angle: 55° Special features Rhombic plate form Single‑sided chipbreaker ISO‑standard geometry for easy holder matching Sharp edge geometry for finishing Intended for continuous cuts and small depths of cut FAQ Which materials is this insert intended for? The DCGT11T304 NS9530 indexable insert is formulated as a finishing grade for steel; the uncoated cermet composition is optimised for low cutting forces and high surface quality in steel turning. What are the main advantages of the NS9530 uncoated cermet grade? NS9530 provides a sharp cutting edge with good wear resistance typical of cermet compositions, yielding improved surface finish and stable dimensional results during continuous finishing operations. How is compatibility with tool holders ensured? Compatibility is governed by the ISO geometry: form, relief angle, tolerance class, fastening method, size and thickness must match the holder. The DCGT11T304 form, the 7° relief angle and the hole/countersink detail permit reliable clamping in standard external holders and boring bars. Is the insert suitable for interrupted cuts or roughing? This grade is optimised for continuous finishing cuts and small depths of cut; interrupted cuts and heavy roughing are not the primary application and may reduce tool life or compromise finish quality. What assembly and positioning features support repeatability? The rhombic shape with a central cylindrical hole plus one‑sided countersink (40°–60°) and defined thickness ensure consistent seating and tightening force, which aids repeatable positioning and stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of sharp uncoated cermet cutting performance and ISO‑standard geometry for reliable finishing in turning operations; order the inserts directly via Metav Werkzeuge or consult our experts for application advice. DCGT 11T304 NS9530 — ISO rhombic turning insert, uncoated cermet, Tungaloy The DCGT11T304 NS9530 is an ISO‑standard rhombic turning insert engineered for fine finishing of steel components in continuous cuts and small depths of cut. ISO rhombic geometry for stable indexing Sharp NS9530 uncoated cermet for fine finishing 0.4 mm corner radius for precise contours Central hole with cylindrical seat and countersink Delivering consistent fine finishing with low cutting forces The uncoated cermet grade NS9530 is formulated to produce a very sharp cutting edge and reduced built‑up edge, which results in lower cutting forces and improved surface quality when turning steel. For shops seeking predictable part finish and dimensional stability, this grade supports continuous cutting strategies and small depth‑of‑cut machining where surface integrity is critical. The rhombic insert geometry and the modest 0.4 mm corner radius ensure accurate contouring on external and internal profiles while maintaining consistent tool life in routine finishing operations. Stable chip control and secure clamping for productive turning A one‑sided chipbreaker combined with the central cylindrical hole and one‑sided countersink (40°–60°) provides repeatable chip flow and secure mechanical clamping in compatible holders. The insert’s 7° clearance angle reduces rubbing at the flank and helps to maintain cutting efficiency across a range of feed rates. Together, these details enable predictable chip evacuation and minimise the risk of unexpected edge damage, enhancing process stability in production runs and reducing downtime for edge changes. Easy integration into ISO‑compliant tool systems Designed to the ISO turning insert family, the geometry, thickness and hole configuration of this series ensure broad compatibility with standard external holders and boring bars when matched by form, clearance angle and tolerance class. The insert thickness of 3.97 mm and the inscribed circle size 11 make setup straightforward for existing toolholders that accept the DCGT form. Where grading and chip control are decisive, selecting the matching holder and clamping kit ensures the insert performs to its intended specification without adaptation. Practical benefits for workshop productivity and quality Using a grade focused on finishing translates into measurable shop benefits: fewer rework cycles due to improved surface finish, reduced force‑induced distortion on thin‑walled parts, and extended intervals between tool edge changes when conditions align with the grade’s strengths. The DCGT geometry with 55° insert angle also supports stable engagement on shoulders and taper features. For operations prioritising repeatability and surface integrity in steel turning, this insert offers a balanced compromise between sharp cutting performance and dependable handling under continuous feed conditions. For application guidance or to procure Tungaloy DCGT11T304 NS9530 inserts through Metav Werkzeuge, please contact Metav Werkzeuge’s technical consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: 6997929 SKU: 6997929-Tungaloy Manufacturer SKU: TUN6997929 Manufacturer article number: 6997929 Model series: ISO turning inserts ISO designation: DCGT11T304 Grade: NS9530 Cutting material: uncoated cermet Size (inscribed circle): 11 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 55° Hole: central, cylindrical with one‑sided countersink (40°–60°) Shape: rhombic Application: turning Chipbreaker: one‑sided Facts Thickness: 3.97 mm Inscribed circle: 11 Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 55° Countersink angle range: 40°–60° Special features ISO‑standardised geometry for broad holder compatibility Sharp finishing grade tailored to steel machining Low cutting forces and good surface quality in continuous cuts Central hole and countersink for secure mechanical clamping One‑sided chipbreaker for controlled chip formation FAQ What materials is this insert intended for? The NS9530 grade is optimised for turning steel, providing particularly good surface finish and reduced cutting forces when used for finishing operations. Can this insert be used for internal as well as external turning? Yes, the rhombic form and the 0.4 mm corner radius make the insert suitable for both external and internal turning applications when the appropriate holder is used. How does the clamping system work with the countersunk hole? The central cylindrical hole combined with the one‑sided countersink (40°–60°) allows secure seating in holders designed for ISO inserts, ensuring repeatable positioning and stable cutting. Is the grade coated? The NS9530 specification denotes an uncoated cermet finishing grade intended for sharp cutting edges and improved surface quality. Which SKU identifies this product? This item is listed under SKU 6997929-Tungaloy and manufacturer article number 6997929. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 NS9530 Wendeplatten - Tungaloy
Achieve consistently high surface quality and low cutting forces with the DCGT11T304 NS9530 cermet insert; its ISO compatibility and 7° relief angle support reliable finishing operations in steel turning. Benefit from the durable uncoated cermet grade designed for continuous cuts and small depths, and ask Metav Werkzeuge for application advice or to place an order. DCGT 11T304 NS9530 — Tungaloy indexable turning insert, cermet finishing grade The DCGT11T304 NS9530 Tungaloy indexable insert is a rhomboid ISO‑design insert for precision finishing in turning applications, optimised for low cutting forces and high surface finish on steel. Cermet NS9530 for superior surface finish ISO rhombic insert, 7° relief for finishing Cylindrical hole with single‑side countersink Suitable for continuous cuts and small depths Fine finishing and consistent surface quality with cermet technology The insert is produced in an uncoated cermet grade (NS9530), which combines a sharp cutting edge with wear resistance to deliver a high‑quality finish on steel. For finishing passes where low cutting forces and excellent surface integrity are required, the material composition of the grade reduces built‑up edge formation and preserves edge geometry over repeated short engagements. This results in predictable component surfaces and reduced rework, improving process reliability in serial production and precision turning tasks. Designed for reliable fitment and predictable machining outcomes Compliance with the ISO designation DCGT11T304 ensures straightforward compatibility with ISO‑style holders and boring bars; fit is governed by insert form, relief angle, tolerance class, attachment method, size and thickness. The rhombic form with a 55° lead angle and 7° relief angle is tailored for external and internal finishing cuts. The insert’s cylindrical hole with a single‑side countersink (40°–60°) simplifies clamping and repeatable seating, so assembly time is minimised and repeatability between tool changes is enhanced. Process benefits and suggested use cases This indexable cutting solution is optimised for finishing on steel where continuous cutting and small depths of cut are typical. The 0.4 mm corner radius balances edge strength with the ability to produce fine profiles and maintain close dimensional tolerances. The one‑sided chipbreaker assists chip formation for finishing passes, promoting steady chip flow and reducing the risk of surface damage. For customers aiming to increase throughput without sacrificing surface quality, the combination of cermet grade NS9530 and ISO‑compliant geometry offers an efficient finishing option for turned components. For application guidance, availability or to secure the Tungaloy DCGT11T304 NS9530 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery. Technical data Article number: 6997930 Manufacturer SKU: TUN6997930 Model series: ISO‑Drehwendeschneidplatten Label: DCGT11T304 NS9530 Tungaloy‑Wendeplatte SKU: 6997930‑Tungaloy Facts ISO designation: DCGT11T304 Insert size: 11 Lead/approach angle: 55° Clearance (relief) angle: 7° Corner radius: 0.4 mm Plate thickness: 3.97 mm Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Grade: NS9530 (uncoated cermet) Material: cemented carbide body Insert form: rhombic Chipbreaker: one‑sided Application: turning (finishing), external and internal Compatibility: ISO‑normed insert for ISO holders and boring bars FAQ What materials is this insert intended for? The DCGT11T304 NS9530 insert is specified as a finishing grade for steel workpieces; the NS9530 cermet is optimised for low cutting forces and high surface finish on steel. How does the cermet grade affect machining performance? The uncoated cermet composition of the NS9530 grade provides a sharp, wear‑resistant cutting edge that maintains surface integrity during continuous finishing cuts, reducing built‑up edge and improving consistency. Which holders and clamping systems fit this insert? The insert follows the ISO DCGT11T304 geometry; compatibility depends on holder form, relief angle, tolerance class, attachment method, size and thickness — the cylindrical hole with a single‑side countersink supports standard clamping arrangements. Is this insert suitable for internal turning as well as external? Yes, the rhombic form and 55° approach angle make the insert suitable for both external and internal finishing operations, especially when small depths of cut and continuous cutting are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 SH7025 Wendeplatten - Tungaloy
Taking advantage of a tough, edge‑stable SH7025 grade and a precise 0.4 mm corner radius, this insert delivers reliable performance in ISO‑standard turning processes; order directly via Metav Werkzeuge or consult the technical team for application advice. DCGT 11T304 SH7025 — Turning indexable insert by Tungaloy (DCGT11T304 SH7025 Tungaloy-Wendeplatte) A DCGT11T304 SH7025 Tungaloy insert designed as an ISO‑standard rhombic turning plate for general external and internal turning applications, optimised for small tools and variable engagement conditions. Coated carbide grade SH7025 Rhombic ISO insert, 55° cutting angle 0.4 mm corner radius for precise finishes One-sided chipbreaker, cylindrical hole fit Durable grade for stable cutting performance The SH7025 is a coated carbide grade developed for toughness and edge stability, especially under varying engagement and small‑tool conditions. This characteristic reduces the risk of premature chipping when cutting parameters fluctuate, which leads to more consistent cycle times and fewer unplanned tool changes. The coating supports wear resistance while the substrate maintains fracture toughness, so the insert is suited for demanding turning where a combination of reliability and consistent tool life is valued. Geometry engineered for consistent surface quality With a 55° cutting angle and 0.4 mm corner radius, the rhombic plate produces a balance between strength and surface finish. The moderate corner radius improves edge support for interrupted cuts and reduces chatter, while still enabling acceptable surface roughness on most turned components. The 3.97 mm thickness contributes to mechanical stability in the pocket and helps maintain concentricity during heavier feeds, resulting in uniform part quality across batches. ISO compatibility and secure clamping for routine use The insert is ISO‑designated and supplied with a cylindrical hole and a single‑side countersink (40°–60°) to match standard clamping systems. Compatibility to a given holder is determined by form, free clearance, tolerance class, fastening, size and thickness; these parameters should be checked against the toolholder specification to ensure correct seating and repeatability. The single‑sided chipbreaker aids chip control in many turning tasks and is particularly helpful when the machining setup or material behaviour requires predictable chip formation. Practical selection and process advantages Intended for both external and internal turning, the plate performs best when the chipbreaker and grade are matched to the work material and machining stability. The combination of a tough grade and a robust geometry helps to avoid frequent insert changes, improving productivity on repetitive turning operations. For process planning or grade selection, assistance is available from Metav Werkzeuge technical staff who can advise on the best chipbreaker and holder pairing for the intended application. For application support or to secure immediate supply of Tungaloy turning inserts, contact Metav Werkzeuge for tailored recommendations and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6967465 Manufacturer SKU: TUN6967465 SKU: 6967465-Tungaloy Model series: ISO-Drehwendeschneidplatten Dimensions & geometry ISO designation: DCGT11T304 Plate size: 11 mm Thickness: 3.97 mm Corner radius: 0.4 mm Cutting angle: 55° Free clearance angle: 7° Features & materials Material: carbide Grade/coating: SH7025 (coated carbide) Plate shape: rhombic Chipbreaker: one-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Application: turning (external and internal) FAQ What applications is this insert intended for? The DCGT11T304 SH7025 Tungaloy insert is intended for general turning, including both external and internal turning operations, and performs well in conditions requiring a tough, edge‑stable grade. How is holder compatibility ensured for the plate? Compatibility is determined by the insert form, free clearance angle (7°), tolerance class, fastening method, size (11 mm) and thickness (3.97 mm); the DCGT11T304 SH7025 should be matched to holders that accept the rhombic ISO geometry and the specified hole/countersink style. Does the corner radius affect the surface finish? Yes; the 0.4 mm corner radius of this plate provides a compromise between edge strength and surface finish, improving resistance to chipping while still producing consistent part surfaces in normal turning feeds. What chip control features are included? The plate is supplied with a single‑sided chipbreaker to promote predictable chip formation during turning; combined with the cylindrical hole and countersink, it supports secure clamping in standard toolholders. Is the SH7025 grade suitable for fluctuating engagement conditions? The SH7025 grade is described as tough and edge‑stable, making it particularly suitable for smaller tools and operations where cutting engagement may vary, helping to reduce the risk of unexpected edge damage. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T304 SH7025 Wendeplatten - Tungaloy
Benefit from the SH7025 coated carbide grade, the 0.4 mm nose radius and ISO-compatible geometry for stable, predictable turning performance. Order genuine Tungaloy inserts directly via Metav Werkzeuge or ask the consultants for application-specific advice. DCGT 11T304 SH7025 ISO indexable turning insert for turning — rhombic 55°, 0.4 mm nose radius (Tungaloy) The DCGT 11T304 SH7025 is an ISO-standardised rhombic indexable insert engineered for external and internal turning, offering a tough coated carbide grade suited to small tools and varying engagement conditions. ISO-standard rhombic 55° geometry Coated carbide grade SH7025 for toughness 0.4 mm nose radius for fine finishing Cylindrical hole with single-side countersink Stable machining where engagement changes The coated carbide grade SH7025 provides a balance of toughness and edge stability that reduces the risk of premature edge failure when cut conditions vary. As a coated carbide insert with an optimised microstructure, the plate offers consistent chip formation and extended life on interrupted cuts. This results in fewer indexings and lower tooling costs per component, improving overall process economy without compromising surface quality. Fast, reliable set-up and proven ISO compatibility Being ISO-standardised, the insert guarantees compatibility with a wide range of clamping systems when the holder matches form, clearance angle, tolerance class, fastening style, size and thickness. The rhombic plate and its cylindrical hole with a single-side countersink (40°–60°) allow secure seating and repeatable clamping, which shortens set-up time and reduces vibration-induced tool wear. Specified dimensions such as 11 mm size and 3.97 mm thickness make tool selection straightforward and predictable for production planners. Geometry tailored for precision and surface finish The combination of the 55° included angle and 0.4 mm nose radius supports both profile turning and finishing passes, delivering a good surface even on semi-finishing cuts. The one-sided chipbreaker helps control chip flow and minimises re-cutting, while the rhombic shape provides two usable cutting edges per side depending on orientation. These geometric choices are particularly useful when the priority is a consistent finish with manageable cutting forces rather than aggressive material removal. Application guidance and material considerations Designed primarily for turning, the insert is suitable for both external and internal operations; the SH7025 grade is specifically recommended for small tooling or situations with fluctuating engagement. Selection of the correct chipbreaker and matching grade to the workpiece material is essential: the tougher SH7025 excels where edge stability under variable loads is required. For best results, pair the insert with a suitable ISO holder, ensure correct clearance and fastening, and monitor feed and speed to align with the chosen chipbreaker performance. For stable, economical turning with Tungaloy’s SH7025 grade, order original DCGT 11T304 inserts via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and quick delivery Technical Data Article number: 7743500 Manufacturer SKU: TUN7743500 SKU: 7743500-Tungaloy Model series: ISO indexable turning inserts Material: carbide Designation: DCGT11T304 SH7025 Facts Insert size: 11 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 55° Hole: with hole Special features Coating / grade: SH7025 Coated carbide Rhombic plate form One-sided chipbreaker Cylindrical hole + single-side countersink (40°–60°) ISO-standardised for turning Suitable for external and internal turning FAQ What applications suit this insert best? The DCGT 11T304 SH7025 Tungaloy indexable insert is intended for general external and internal turning, particularly where edge stability is required under variable engagement. Which workpiece materials are appropriate? The SH7025-coated carbide grade is a tough, edge-stable option; it is recommended where interrupted cuts or small tooling demands require reliable performance with consistent chip formation. How does the insert mount in a holder? Clamping depends on matching form, clearance angle, tolerance class, fastening method, size and thickness; the DCGT11T304’s cylindrical hole with a single-side countersink ensures secure seating when used with compatible ISO holders. What cutting performance can be expected from the 0.4 mm radius? A 0.4 mm nose radius supports improved surface finish on finishing and semi-finishing passes while maintaining acceptable cutting forces; it is a compromise between sharpness and edge strength. Is this an original Tungaloy product and how is it identified? This is an original Tungaloy indexable turning insert, identified by the designation DCGT11T304 SH7025 and manufacturer article number 7743500 Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of the SH725 coated-carbide grade, precise 55° rhombic geometry and a 0.4 mm corner radius for consistent surface quality and stable tool life; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. DCGT 11T304 SH725 — ISO rhombic turning insert, coated carbide by Tungaloy The DCGT 11T304 SH725 is a rhombic ISO turning insert designed for external and internal turning, offering a tough, cutting-edge-stable coated-carbide grade for variable engagement conditions. ISO rhombic insert for turning, 55° included angle SH725 coated carbide for stable cutting edges 0.4 mm corner radius for precise finishes One-sided chipbreaker, hole with countersink Reliable grade for variable machining conditions The SH725 grade is a coated carbide formulation developed for toughness and stable cutting edges under fluctuating engagement and smaller-tool scenarios. In practical terms, this means longer intervals between insert changes and reduced scrap rates when encountering intermittent cuts or uneven stock. The combination of coating and substrate supports consistent wear patterns, allowing process engineers to predict tool life more reliably and to plan production runs with fewer interruptions. Geometry tuned for finish and rigidity A 55° rhombic profile provides versatile cutting entry angles for both external and internal turning operations, while the 0.4 mm corner radius helps achieve finer surface finishes without compromising strength at the cutting edge. The 7° relief angle minimises flank contact and the 3.97 mm thickness contributes to insert rigidity, reducing vibration and improving dimensional stability. These geometric choices balance surface quality with robustness, making the insert suitable where repeatable tolerances and good finishes are required. Compatibility, clamping and chip control As part of the ISO series, compatibility with external holders is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert features a cylindrical hole with single-sided countersink (40°–60°) and a one-sided chipbreaker, which together enable secure clamping and controlled chip flow in many turning setups. When selecting a toolholder and clamping set, match the holder form and tolerance class to the insert dimensions to ensure repeatable seating and torque transmission. Recommended applications and selection guidance The insert is intended for general turning tasks where changing cutting conditions or limited overhangs are common; it is especially appropriate for smaller tooling systems and mixed-production environments. Choose the one-sided chipbreaker and the SH725 grade to favour toughness and edge stability; when facing different workpiece materials or harder conditions, adapt the chipformer and cutting parameters accordingly. For process optimisation, pair the insert with holders that provide minimal runout and good rigidity to exploit the coated carbide benefits fully. For proven edge stability in varied turning operations, discuss the DCGT 11T304 SH725 with Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for availability and application advice Technical Data Article number: 6737140 SKU (vendor): 6737140-Tungaloy Manufacturer SKU: TUN6737140 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DCGT11T304 SH725 Tungaloy-Wendeplatte Numbers / Core Technical Data Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 55° Special features / Applications Grade: SH725 (coated carbide) Plate form: rhombic (DCGT) One-sided chipbreaker Hole: with cylindrical hole + single-sided countersink (40°–60°) Application: turning (external and internal) ISO-standard insert series FAQ What holders are compatible with this insert? Compatibility is determined by the insert form, relief angle, tolerance class, fastening and thickness; the DCGT 11T304 SH725 fits ISO-compatible external holders designed for DCGT inserts. For which turning tasks is this grade recommended? The SH725 grade is recommended for turning operations with variable engagement and smaller-tool set-ups where edge stability and toughness are priorities. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius balances edge strength and surface quality, improving finish compared with larger radii while maintaining robustness under intermittent cuts. What is the purpose of the single-sided chipbreaker? The one-sided chipbreaker controls chip formation and evacuation for many turning scenarios; pairing it with appropriate feeds helps maintain steady cutting conditions. What should be checked before mounting the insert? Ensure the holder matches the ISO form, verify seating flatness and tolerance class, and confirm the clamping screw and pad align with the insert hole and countersink. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 SH725 Wendeplatten - Tungaloy
Benefit from a combination of reliable edge stability, ISO compatibility and a fine 0.4 mm corner radius for predictable turning results. The coated carbide grade SH725 provides process stability even with smaller tools or fluctuating engagement conditions; order the insert via Metav Werkzeuge or consult their specialists for machining recommendations. DCGT11T304 SH725 — Tungaloy turning insert, coated carbide, 0.4 mm radius The DCGT11T304 SH725 is an ISO-standard indexable insert for turning, designed for robust edge performance in varied engagement conditions and compatible with ISO toolholders. Coated carbide for stable cutting Rhombic 55° geometry for versatility 0.4 mm corner radius for fine finishing Stable cutting performance from a tough coated grade The SH725 grade is a coated carbide designed to maintain a stable cutting edge under variable engagement, which reduces unplanned tool changes and supports continuous production. The formulation is optimised for edge integrity, making it particularly suitable for smaller tooling assemblies or operations where cut depth and feed can vary. This leads to improved process reliability and can lower overall machining costs through extended insert life and fewer indexings. Geometry and edge design for consistent finishes A rhombic plate with a 55° included angle and a 0.4 mm corner radius delivers a balance between accessibility and finish capability. The insert’s 7° clearance angle and one-sided chipbreaker help control chip formation and contact conditions, supporting repeatable surface quality in both external and internal turning. The 3.97 mm thickness contributes to rigidity in the clamped assembly, reducing vibration and promoting dimensional consistency across batch production. ISO compatibility and secure clamping for simple integration Produced to ISO dimensions, the insert is intended for straightforward integration into established tool systems; compatibility is defined by form, clearance angle, tolerance class, fastening method, size and thickness. The plate is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure reliable clamping and positional repeatability when used with the appropriate shim, clamp and holder. Selecting a matching chipbreaker and grade according to workpiece material and operation will optimise performance and surface result. For tailored machining recommendations or to source Tungaloy DCGT11T304 SH725 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6784493 SKU: 6784493-Tungaloy Manufacturer SKU: TUN6784493 Designation: DCGT11T304 SH725 Tungaloy insert Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Insert size: 11 Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 55° Special features Coating: SH725 (coated carbide) Chipbreaker: one-sided Plate shape: rhombic (diamond) Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: turning Compatible with ISO-standard holders (form, clearance angle, tolerance, fastening, size, thickness) FAQ Which operations are suitable for this insert? The insert is intended for external and internal turning; the chipbreaker and grade should be matched to the machining task and workpiece to achieve the desired surface quality and tool life. How does the clamping arrangement secure the insert? Clamping uses the cylindrical hole with a single-sided countersink (40°–60°) to enable secure, repeatable positioning when used with the correct shim, clamp and holder designed for ISO-standard inserts such as the DCGT11T304 SH725. What are the key geometry advantages for surface finish? The rhombic 55° geometry combined with a 0.4 mm corner radius and a 7° clearance angle provides accessibility for internal features and consistent contact conditions that support improved surface finish and dimensional control. Is the grade suitable for unstable engagement or smaller tools? Yes, the SH725 coated carbide grade is formulated for edge stability under variable engagement and is specifically noted for reliable performance with smaller tooling assemblies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 SH730 Wendeplatten - Tungaloy
High-performance SH730 coating and stable carbide base deliver consistent edge life and adaptable chip control; ideal for variable engagement and smaller tooling where reliable cutting-edge performance is required. Order the DCGT11T304 SH730 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DCGT 11T304 SH730 – Turning indexable insert, Tungaloy The DCGT11T304 SH730 indexable insert is an ISO‑form rhombic turning insert with a 55° geometry, designed for general external and internal turning with a one‑sided chipbreaker and secure clamping. SH730 coated carbide for edge stability 55° rhombic form for versatile turning 0.4 mm corner radius for fine profiling Cylindrical hole with counterbore for secure clamping Consistent cutting performance for variable conditions The SH730 grade is a coated carbide designed to combine toughness with sustained edge stability, making it suitable for turning operations that involve fluctuating engagement or intermittent cuts. The one‑sided chipbreaker promotes controlled chip formation and evacuation, which reduces the risk of built‑up edge and contributes to uninterrupted machining cycles. These characteristics support higher process reliability and predictable tool life in series production and jobbing alike. Secure mounting and ISO compatibility reduce setup risk The rhombic insert features a cylindrical hole with a single‑sided countersink (40°–60°) that ensures repeatable seating and a secure clamp fit. The insert’s form, relief angle and tolerance class conform to ISO standards, so compatibility with standard ISO holders is governed by geometry and size rather than proprietary fittings. This simplifies inventory management and lowers the effort required when changing inserts between holders. Geometry and dimensions that add precision to the cut A 55° lead angle combined with a 0.4 mm corner radius enables fine contouring and reliable finish on both external and internal profiles. The plate thickness of 3.97 mm gives sufficient support for small to medium‑scale turning tools while limiting overhang and vibration. Together, these dimensions balance edge strength and the ability to achieve close tolerance workpieces, particularly in less rigid setups. Material range and process orientation The coated grade is engineered for a broad material spectrum, favouring applications where toughness and edge retention are essential. The insert’s properties make it suitable for general turning across a range of steels and cast materials, with the chipbreaker choice allowing adaptation to the workpiece material and machining parameters. Selection of the SH730 grade typically improves process stability in mixed‑batch environments. Practical benefits in workshop operation Standardised ISO geometry simplifies insert selection and stockkeeping, while the robust coated carbide core reduces downtime through longer intervals between index changes. The combination of rhombic form, one‑sided chipbreaker and secure hole design reduces the need for frequent adjustments, supporting smoother production flow and easier operator handling. For machines that require frequent tool changes, the insert’s repeatability contributes to faster setup and reduced scrap rates. Contact Metav Werkzeuge for compatibility checks and procurement of the Tungaloy DCGT11T304 SH730 indexable insert: eMail info@metav-werkzeuge.com or telephone +49 2822 7131930 for swift expert advice and ordering assistance Technical Data Article number: 6854006 SKU: 6854006-Tungaloy Manufacturer SKU: TUN6854006 Dimensions & numerical data Inscribed circle / size: 11 mm Plate thickness: 3.97 mm Relief angle: 7° Lead/approach angle: 55° Corner radius: 0.4 mm Design & special features Model series: ISO turning indexable inserts Grade/coating: SH730 Cutting material: coated carbide Plate form: rhombic Chipbreaker: one‑sided Hole: cylindrical hole with single‑sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert best suited for? The DCGT11T304 SH730 indexable insert is supplied in a coated carbide grade engineered for a wide material range, offering good edge stability for common steels and cast materials. How is the insert secured in the holder? The insert uses a cylindrical hole with a single‑sided countersink (40°–60°) to provide repeatable seating and secure clamping when mounted in compatible ISO turning holders. Which geometry characteristics improve surface finish? The 55° rhombic geometry combined with a 0.4 mm corner radius and the plate thickness of 3.97 mm support fine profiling and stable cutting, which helps to achieve consistent surface quality. Is the SH730 grade suitable for interrupted cuts? Yes, SH730 is formulated to offer enhanced toughness and edge stability, making the insert appropriate for applications with variable engagement or intermittent cutting conditions. Can the insert be used for both external and internal turning? The ISO rhombic shape and chipbreaker design of the DCGT11T304 SH730 make it suitable for both external and internal turning tasks when matched with the correct holder and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated TH10 carbide grade and a compact 0.4 mm corner radius for predictable turning performance; order the insert directly via Metav Werkzeuge or consult our technical team for holder compatibility and application advice. DCGT 11T304 TH10 ISO rhombic turning insert for turning — Tungaloy The DCGT 11T304 TH10 is an ISO-standard rhombic indexable insert designed for external and internal turning, providing a 55° cutting angle and an uncoated edge optimised for low cutting forces. ISO-standard rhombic geometry 55° Uncoated carbide grade TH10 for clean cuts 0.4 mm corner radius for versatile finishing Cylindrical hole with 40°–60° countersink Improved productivity through geometry and grade The combination of rhombic geometry and a 55° cutting angle delivers a versatile balance between strength and accessibility for a wide range of turning tasks. Manufactured in carbide and supplied in the universal TH10 grade, the insert offers an uncoated cutting edge that reduces built-up edge when machining non-ferrous materials, resulting in cleaner surface finishes and lower cutting forces. This makes the component suitable for precision finishing and light roughing where edge integrity and surface quality are priorities. Designed for secure clamping and ISO interchangeability Compatibility with toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation ensures straightforward replacement within standard holder systems. The insert features a cylindrical hole with one-sided countersink (40°–60°) and a plate thickness of 3.97 mm, allowing stable clamping when used with the correct shim and clamp set. For consistent performance, select a holder that matches the insert's tolerance class and secure the fixing screws to the manufacturer’s recommended torque to avoid movement during heavy cuts. Tailored for non-ferrous machining and fine surfaces The TH10 grade is a sharp, universal uncoated carbide variety developed for non-ferrous alloys and situations where an uncoated edge helps to achieve low cutting forces and polished surfaces. Typical applications include aluminium and brass components where chip control and minimal built-up edge are important. The single-sided chipbreaker promotes predictable chip formation for these materials, supporting both productivity and part quality when the correct feed and speed settings are applied. Practical benefits for workshop logistics and process stability Using ISO-standard turning inserts simplifies inventory management and speeds up tool changes on the shop floor. The 0.4 mm corner radius provides a good compromise between strength and finish capability, reducing the need for frequent insert changes while delivering consistent part geometry. Where process stability and repeatability are required, the combination of an ISO-form insert, a defined free angle of 7° and the TH10 grade helps to maintain predictable results across batches. Our technical advisors can help specify the best chipbreaker and grade variant for the selected workpiece material and machining strategy. For precise recommendations on using the TH10 grade from Tungaloy or to confirm holder compatibility, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, application-focused guidance and availability. Technical data Article name: DCGT11T304 TH10 Tungaloy-Wendeplatte SKU: 6802850-Tungaloy Manufacturer SKU: TUN6802850 Manufacturer article number: 6802850 Model series: ISO-Drehwendeschneidplatten Material: Carbide Measurements Geometry: Rhombic, 55° Plate size: 11 Plate thickness: 3.97 mm Corner radius: 0.4 mm Relief (free) angle: 7° Special features Grade: TH10 (uncoated) Chipbreaker: One-sided Hole: Cylindrical hole + one-sided countersink (40°–60°) Application: Turning (external and internal) System components: Insert, matching external holder or boring bar, shim/clamp set, replacement screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited to machine? The DCGT 11T304 TH10 insert is optimised for non-ferrous materials and applications where an uncoated TH10 carbide edge supports low cutting forces and a clean surface finish. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius provides a balance between edge strength and surface quality; it helps to reduce edge chipping while still delivering a fine finish on turned parts when feeds and speeds are selected appropriately for the TH10 grade. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions; compatibility is defined by form, relief angle, tolerance class, fastening, size and thickness, so use a holder that matches these parameters for secure clamping. What chip control does the single-sided chipbreaker provide? The single-sided chipbreaker on this insert promotes predictable chip formation for non-ferrous cutting, supporting consistent evacuation and reducing the risk of entanglement during turning. Can this insert be used for both external and internal turning? This rhombic ISO insert is suitable for both external and internal turning operations when paired with an appropriate external holder or boring bar and correct clamping components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 TH10 Wendeplatten - Tungaloy
Combine the uncoated TH10 carbide grade with the ISO‑standard rhombic form and a 0.4 mm nose radius to achieve low cutting forces and consistently clean surface finishes; ideal for external and internal turning. Order the DCGT11T304 TH10 insert via Metav Werkzeuge or consult our specialists for process‑specific recommendations. DCGT11T304 TH10 indexable insert for turning by Tungaloy — 55° rhombic, 0.4 mm radius The DCGT11T304 TH10 is a rhombic ISO indexable insert for external and internal turning, offering a sharp uncoated carbide edge that supports low cutting forces and clean surface results. ISO rhombic 55° geometry Uncoated carbide TH10 for low cutting forces 0.4 mm nose radius for fine surface finish Cylindrical hole with 40°–60° countersink Consistent cutting performance for non‑ferrous workpieces The combination of uncoated carbide TH10 and the rhombic 55° form delivers stable machining behaviour when turning non‑ferrous materials such as aluminium, copper and messÂing. The uncoated edge reduces the tendency for built‑up edge, which in turn lowers cutting forces and helps maintain a cleaner contact area between tool and workpiece. As a consequence, cycle times can be reduced while achieving reliable dimensional repeatability. The DCGT11T304 insert is therefore suited to applications where gentle cutting action and good surface integrity are priorities. Geometry that improves surface finish and repeatability A 55° geometry combined with a 0.4 mm nose radius balances cutting strength and finish quality: the acute rhombic form provides access for profiling and close shoulder work, while the modest nose radius supports fine surface quality without excessive cutting forces. In practice, a smaller nose radius helps to avoid chatter on long overhangs and reduces the risk of tool overload during interrupted cuts. These geometric choices translate into measurable benefits: fewer reworks and more predictable finishing passes. Simple integration into ISO indexable systems As an ISO‑standard insert with a 3.97 mm plate thickness and a 7° clearance, the component fits common external holders and boring bars provided the holder matches form, tolerance class, fastening and size. The insert is supplied with a hole and a cylindrical hole plus one‑sided countersink (40°–60°) for secure clamping and repeatable seating. This standardisation simplifies tool inventory management and reduces setup time on the shopfloor because compatible clamping sets and replacement screws are widely available. Chip control and process guidance for turning tasks The single‑sided chipbreaker is designed to produce predictable chips in recommended cutting directions and to assist in surface stability for finishing and medium finishing cuts. Selecting the correct chipbreaker and cutting parameters should be done with regard to workpiece material and machine stability: a sharper uncoated edge suits low‑force finishing, whereas higher stability conditions can exploit increased feed for productivity. For process optimisation, choose the chipbreaker and cutting data that match the component geometry and the required surface quality. Contact Metav Werkzeuge to specify the DCGT11T304 TH10 insert for your turning process and request tailored cutting parameters from our consultants — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast assistance. Technical data Article number: 6802848 Manufacturer SKU: TUN6802848 SKU: 6802848-Tungaloy Material: Hartmetall ISO designation: DCGT11T304 Shape: rhombic Hole: mit Loch Numbers / Core technical data Thickness: 3.97 mm Size: 11 mm Nose radius: 0.4 mm Clearance angle: 7° Main angle: 55° Designs / Special features Uncoated carbide TH10 grade Single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) ISO‑standard turning insert Compatibility depends on form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The DCGT11T304 TH10 insert from Tungaloy is optimised for non‑ferrous materials such as aluminium, copper and messÂing, and for applications where an uncoated cutting edge reduces built‑up edge and cutting forces. Can this insert be used for internal as well as external turning? Yes, the rhombic 55° form and the insert dimensions make it suitable for both external and internal turning tasks when paired with the correct holder and clamping set. How does the single‑sided chipbreaker influence machining? The single‑sided chipbreaker on this insert promotes controlled chip formation in the designated cutting direction, improving stability and surface finish during finishing and medium finishing operations. What holder features are required for compatibility? Compatibility with a holder is determined by the insert form, 7° clearance, tolerance class, fastening method, size (11 mm) and thickness (3.97 mm); ensure the holder matches the ISO geometry and clamping style. Which order codes and identifiers should be quoted when ordering? Quote the Tungaloy indexable insert DCGT11T304 TH10 and the manufacturer article number 6802848 or Manufacturer SKU TUN6802848 when placing an order. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, the TH10 uncoated carbide grade and a 0.4 mm corner radius for precise, low‑force turning of non‑ferrous parts; order directly via Metav Werkzeuge or ask our consultants for holder recommendations. DCGT11T304 TH10 ISO turning insert (uncoated carbide, 0.4 mm corner radius) – Tungaloy A DCGT11T304 TH10 is an ISO‑standard rhombic turning insert designed for external and internal turning, particularly for non‑ferrous materials and operations requiring low cutting forces ISO rhombic insert, 55° cutting angle Uncoated carbide grade TH10 for clean cuts 0.4 mm corner radius for precision profiles Cylindrical hole with single‑side chipbreaker Reliable seating and clear compatibility reduce setup time The ISO‑standard format ensures the insert seats predictably in standard holders; compatibility is determined by form, clearance, tolerance class, fastening and plate thickness. The insert is made of uncoated carbide in TH10 grade so it is free of surface coatings that might change clamping behaviour; this supports consistent clamping torque and repeatable tool offsets. Where process stability matters, selecting a holder that matches the insert’s form and the specified 7° relief angle is essential to maintain accurate tool projection and minimise rework. Lower cutting forces that improve finish and cycle time Thanks to the sharp universal geometry of this grade, cutting forces are reduced, which supports finer surface quality and less power draw on the machine spindle. The single‑side chipbreaker promotes predictable chip flow for turning operations, helping to avoid entangling swarf and minimising manual intervention. For machining aluminium, copper alloys and other non‑ferrous materials the combination of a sharp edge and the 0.4 mm corner radius yields accurate profiles and consistent edge life, so part tolerances and finishes are achieved more reliably. Thoughtful configuration keeps production consistent Select the chipbreaker and grade according to workpiece material, operation type and machine rigidity; the insert’s rhombic shape and 55° cutting angle are suited to both external and internal turning profiles. The plate thickness of 3.97 mm and the cylindrical hole with a single‑side countersink (40°–60°) permit secure fastening with standard clamps and screws in a typical ISO system build‑up (insert, holder, shim, clamp and replacement screws). For repeatable results, inspect seating faces for burrs and verify the tightening torque to maintain process reliability. For best results with the Tungaloy TH10 insert and to confirm the correct holder combination, contact Metav Werkzeuge for technical guidance and availability: info@metav-werkzeuge.com | +49 2822 7131930. Technical data Article number: 6802844 Manufacturer SKU: TUN6802844 Metav SKU: 6802844-Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 3.97 mm Plate size: 11 mm Cutting angle: 55° Relief angle: 7° Special features ISO turning insert series Rhombic shape Uncoated carbide (Hartmetall) Grade TH10 Single‑side chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Compatible with ISO holders Application: turning (external and internal) FAQ What materials is the DCGT11T304 TH10 insert intended for? The DCGT11T304 TH10 insert from Tungaloy is designed primarily for non‑ferrous materials such as aluminium and copper alloys, where its sharp uncoated edge supports low cutting forces and clean surfaces. How does the single‑side chipbreaker affect machining? The single‑side chipbreaker on the Tungaloy TH10 geometry helps produce predictable chips and reduces the risk of swarf build‑up, improving surface quality and lowering manual chip handling during turning. Which holders are compatible with this ISO insert? Compatibility is determined by the insert form, clearance, tolerance class, fastening, size and thickness; the DCGT11T304 TH10 is intended for standard ISO‑type turning holders that accept rhombic 11‑size plates. What is the significance of the 0.4 mm corner radius? A 0.4 mm corner radius balances profile accuracy and edge strength, enabling precise contouring while offering some robustness against minor interruptions in the cut. Are there any special fastening features to note? The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°), designed for secure clamping with common ISO clamp designs and standard screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T308 KS05F Wendeplatten - Tungaloy
Take advantage of a hard-wearing carbide grade and ISO compatibility for consistent turning performance; the KS05F cutting grade combines wear resistance and edge toughness, while the standardised geometry ensures straightforward mounting in compatible holders. Order the insert directly via Metav Werkzeuge or consult the technical team for detailed setup guidance. DCGT 11T308 KS05F indexable turning insert by Tungaloy — 55° geometry for general turning DCGT11T308 KS05F Tungaloy-Wendeplatte is an ISO-form indexable insert designed for external and internal turning in a wide range of machining set-ups. ISO rhombic insert for turning KS05F grade for wear resistance 55° included angle, 0.8 mm radius Central hole with countersink Precise cutting performance from a robust carbide grade The insert is manufactured from carbide, selected to balance hardness and toughness for turning tasks. The KS05F grade provides enhanced wear resistance together with sufficient edge stability, which reduces flank wear and extends insert life under typical cutting conditions. In practical terms, that means fewer indexings and more uninterrupted production time; the material choice is geared towards stable chip formation and repeatable component quality. The specification as an ISO indexable insert simplifies tool selection and inventory management across machining cells. Geometry that supports accuracy and versatility A rhombic insert form with a 55° included angle delivers flexibility for both external and internal turning operations, while the corner radius 0.8 mm helps achieve a controlled cutting edge for better surface finish and dimensional stability. The listed 7° relief ensures correct clearance at the cutting zone, reducing rubbing and heat generation. The plate thickness 3.97 mm contributes to rigidity in the cutting position; together these geometric parameters enable predictable tool behaviour and easier process planning for programme engineers and machine operators. System compatibility and practical mounting details Compatibility with holders depends on form, relief angle, tolerance class, fastening and plate dimensions — all of which have been standardised for the ISO series. The insert features a central hole with a cylindrical hole plus single-sided countersink (40°–60°) for secure clamp mounting, and a one-sided chipbreaker suited to continuous swarf control in many turning tasks. Use with a matching external holder or boring bar, plus the correct clamping kit and replacement screws, to ensure safe seating and repeatable results. The indexable design also supports economical re-indexing rather than full-tool replacement, helping to reduce tooling cost per part over time. For procurement or process consultation on Tungaloy KS05F inserts, contact Metav Werkzeuge for tailored recommendations and availability — Metav Werkzeuge can advise on holder compatibility and supply the required inserts and clamping components. Technical data Article number: 6822283 Manufacturer article number: 6822283 Manufacturer SKU: TUN6822283 SKU: 6822283-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DCGT11T308 Insert size: 11 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 55° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Grade/coating: KS05F Shape: rhombic Chipbreaker: one-sided Intended application: turning System components: ISO indexable insert, compatible holders, clamping kit and replacement screws FAQ What is this insert intended for? The DCGT11T308 KS05F indexable turning insert by Tungaloy is intended for external and internal turning operations where an ISO rhombic insert form and the KS05F grade are suitable. Which specifications determine holder compatibility? Holder compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the DCGT11T308 designation and the provided geometric data should be matched with the holder and clamping kit. What are the key geometric values to consider? Key values are the 55° included angle, corner radius 0.8 mm, relief angle 7° and a plate thickness of 3.97 mm; the insert also includes a central hole with a cylindrical bore plus a 40°–60° countersink. How does the KS05F grade affect machining? The KS05F grade combines wear resistance and edge stability, supporting longer tool life and predictable performance in turning, while maintaining good chip formation characteristics. Is this an indexable insert and what are the benefits? Yes — it is an indexable insert designed for ISO-compatible holders; benefits include economical re-indexing, simplified inventory management and consistent cutting-edge geometry for repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T308 NS9530 Wendeplatten - Tungaloy
A high-precision finishing insert that combines the sharp cutting edge of the NS9530 cermet grade with a 0.8 mm corner radius and a single-sided chipbreaker for consistent, high-quality surface finish. Benefit from ISO compatibility and a robust centre-hole clamping design — order directly via Metav Werkzeuge or contact our consultants for application guidance. DCGT 11T308 NS9530 Tungaloy turning insert — DCGT11T308, rhombic 55° A DCGT11T308 NS9530 indexable turning insert engineered for external and internal turning, optimised for fine finishing and continuous cuts. Rhombic insert, 55° angle, 0.8 mm corner radius Uncoated cermet grade NS9530 for fine finishing Single-sided chipbreaker for continuous cuts ISO-standardised insert with centre hole and countersink Superior finishing with the NS9530 cermet grade The uncoated cermet NS9530 offers a very sharp cutting edge and reduced tendency to build up material, which directly improves surface quality on steel during finishing operations. Because this grade is designed for continuous cutting and small depth-of-cut strategies, it lowers cutting forces and vibration, resulting in a more stable process window and fewer reworks. The modest corner radius of 0.8 mm supports delicate geometry control, enabling consistent part tolerance and a superior visual finish compared with typical roughing grades. For production environments where finishing quality and repeatability matter, this insert promotes reliable cycle-to-cycle performance without sacrificing edge integrity. Predictable fit and secure clamping for process reliability Built to ISO specifications, the insert’s rhombic form and 55° approach angle ensure compatibility with standard turning holders when the form, relief angle, tolerance class, fastening, size and thickness are matched. The design includes a centre hole with a cylindrical bore and a single-sided countersink (40°–60°), providing positive location and secure clamping. A plate thickness of 3.97 mm and the defined 11 mm inscribed size contribute to rigid mounting and consistent tool projection; this reduces chatter and enables predictable tool life. Clear system definition — insert, suitable holder or boring bar, support shim and clamping screw — simplifies tool procurement and changeover planning in a production setting. Efficient chip control and steady productivity The single-sided chipbreaker is optimised for continuous cuts, directing chips away from the workpiece to protect the finished surface and reduce secondary operations. With a cutting edge engineered for low cutting forces, the insert helps to extend the life of the holder assembly and maintain stable cutting conditions over long runs. The ISO-standard geometry and sharp edge characteristics make the insert particularly suitable for fine finishing of steels, where both surface integrity and dimensional accuracy are priorities. Combined with the NS9530 composition, the insert balances edge retention and toughness to deliver repeatable results in demanding finishing cycles while supporting efficient throughput. Contact Metav Werkzeuge for tailored application advice on Tungaloy finishing inserts and request the DCGT11T308 NS9530 for immediate procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997937 Manufacturer SKU: TUN6997937 Stock SKU: 6997937-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Manufacturer article name: DCGT11T308 NS9530 Tungaloy-Wendeplatte Dimensions & core data ISO designation: DCGT11T308 Inscribed size: 11 mm Corner radius: 0.8 mm Relief angle: 7° Insert thickness: 3.97 mm Approach angle: 55° Special features & design Grade: NS9530 (uncoated cermet) Plate form: Rhombic Chipbreaker: Single-sided Hole: With centre hole Hole style: Cylindrical hole with one-sided countersink (40°–60°) System components: Insert, matching holder or boring bar, support shim/clamping set, spare screws FAQ What applications is this insert best suited for? The DCGT11T308 NS9530 insert is intended for external and internal turning, especially fine finishing of steels where continuous cutting and small depths of cut are used to achieve high surface quality. How does the NS9530 grade affect finishing performance? The uncoated NS9530 cermet provides a very sharp edge and low cutting forces, which reduces built-up edge formation and enhances surface finish when using the DCGT11T308 for finishing operations. Is the insert compatible with standard ISO holders? Yes — the DCGT11T308 follows ISO geometry; compatibility is determined by matching form, relief angle, tolerance class, fastening method, size and thickness with the chosen holder or boring bar. What does the single-sided chipbreaker deliver in production? The single-sided chipbreaker improves chip control for continuous cuts, protecting the finished surface and reducing the risk of rework while maintaining steady productivity. Which clamping arrangement is required for this insert? The insert uses a centre hole with a cylindrical bore plus a one-sided countersink (40°–60°) for positive location; secure clamping requires a compatible screw and support shim as part of the holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑compatibility, a cermet NS9530 finishing grade and a precise 0.8 mm corner radius for consistent high‑quality turning results; order the inserts directly via Metav Werkzeuge or consult the team for application advice. DCGT 11T308 NS9530 ISO rhombic turning insert for turning by Tungaloy The DCGT11T308 NS9530 is an ISO‑standard rhombic turning insert for finishing steels, offering a sharp cutting edge, low cutting forces and suitability for continuous cuts. ISO rhombic insert, 55° geometry Uncoated cermet grade NS9530 Sharp edge for high surface finish Compatible with standard ISO holders High‑quality finishing with low cutting forces The uncoated cermet grade NS9530 is engineered as a finishing grade for steel, providing a sharp cutting edge that reduces cutting forces and improves surface quality. In practice, the result is a consistently fine finish on turned parts, especially when machining with small depths of cut and continuous feed. For operations prioritising surface integrity over heavy material removal, this grade offers reproducible outcomes and helps to reduce rework. ISO compatibility and secure clamping for reliable production The insert follows ISO geometries so compatibility with standard holders is determined by form, relief angle, tolerance class, fastening method, size and thickness. The plate has a rhombic profile with a 55° included angle and a 7° relief angle, and it is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to match many common clamping systems. Clear knowledge of these parameters supports safe, repeatable mounting and predictable cutting behaviour. Practical guidance for efficient turning operations Designed primarily for turning in continuous cuts with small depths of cut, the insert excels in external and internal finishing passes. Selection of an appropriate chipbreaker and the matching grade according to material, machining strategy and component stability is essential; the insert’s single‑side chipbreaker suits stable setups and steady feed rates. Where vibration is minimised and rigidity is ensured, the combination of geometry and grade maximises surface quality while keeping cutting forces low. Compact geometry and handling advantages on the shop floor The insert’s compact dimensions provide geometric control: a 0.8 mm corner radius and a thickness of 3.97 mm contribute to predictable edge strength and profile control during finishing passes. The substrate material is carbide, offering the edge stability required for precision turning. Where tight tolerances and consistent finishes are required, the insert’s specifications support repeatable results and efficient tool management. For finishing applications that demand a precise, sharp cutting edge, contact Metav Werkzeuge to discuss application details or to secure Tungaloy inserts; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for technical support and order placement. Technical data Article number: 6997932 Manufacturer SKU: TUN6997932 Model series: ISO‑Drehwendeschneidplatten Label: DCGT11T308 NS9530 Tungaloy‑Wendeplatte Numbers / Core technical data Insert size: 11 Included angle: 55° Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 3.97 mm Designs / Special features Material: carbide Grade/coating: uncoated cermet NS9530 Shape: rhombic Hole: with cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑side Application: turning, finishing, continuous cut, small depths of cut FAQ What machining tasks is this insert intended for? The DCGT11T308 NS9530 indexable turning insert from Tungaloy is intended for finishing operations in turning, particularly continuous cuts and small depths of cut on steel. Which materials can be machined with this grade? The NS9530 cermet grade is optimised for steel; the DCGT11T308 insert delivers a sharp cutting edge and low cutting forces suited to fine finishing of steel parts. How is the insert secured in the holder? The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°); compatibility with a holder depends on form, relief angle, tolerance class, fastening and size. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius on the DCGT11T308 helps balance edge strength and surface finish, allowing stable profile control during finishing passes. Is the insert coated? The DCGT11T308 is an uncoated cermet insert (NS9530), selected for its sharp edge and high surface finish capabilities. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGT 11T308 NS9530 Wendeplatten - Tungaloy
Product data conflict: the specification lists both cemented carbide and uncoated cermet as the cutting material, which creates ambiguity and makes it difficult to determine the correct information to use; please clarify these details, including whether one material is preferred over the other or if both are applicable in different contexts, to ensure that an accurate and comprehensive product description can be produced without any confusion or errors that might arise from conflicting data in the specification provided.
DCGT 11T308 TH10 Wendeplatten - Tungaloy
Take advantage of the DCGT11T308’s combination of an uncoated carbide TH10 grade, precise rhombic 55° geometry and a 0.8 mm corner radius to achieve stable, low‑force turning and cleaner surface finishes; order the insert directly via Metav Werkzeuge or contact our consultants for tailored advice. DCGT 11T308 TH10 turning insert (ISO 11T308), rhombic 55° — Tungaloy A DCGT11T308 TH10 insert for ISO‑standard turning applications, engineered as a sharp, uncoated carbide option to support low cutting forces and high‑quality surface results in non‑ferrous work ISO‑standard rhombic insert 55° Uncoated carbide grade TH10 Suitable for turning non‑ferrous materials Cylindrical hole with single‑sided countersink Efficient turning with lower cutting forces and better finishes The insert’s TH10 uncoated carbide grade is designed to reduce cutting resistance, which in practice means lower power draw and less tendency for material build‑up on the cutting edge. The rhombic 55° geometry concentrates cutting action into a controlled point of contact, delivering clean surface finish and consistent chip formation when machining non‑ferrous components. For operations prioritising feed stability and reduced cutting heat, this configuration provides a measurable productivity gain without resorting to coated grades. Clear ISO compatibility and secure clamping for predictable performance Compatibility with holders is governed by form, relief angle, tolerance class, clamping method, size and thickness; the ISO designation ensures the insert fits standard turning tool systems where those parameters match. The cylindrical hole with single‑sided countersink (40°–60°) provides reliable seating and repeatable clamping, helping to maintain tool alignment and reduce vibration. Choosing an ISO‑conforming component simplifies tool management across the shop floor and shortens set‑up times in serial production. Material scope and application benefits for non‑ferrous turning This uncoated grade is a sharp universal option particularly well suited to non‑ferrous materials, where a clean, well‑shedding cutting edge improves finish quality and reduces burr formation. The 0.8 mm corner radius balances edge strength with the ability to produce fine profiles; it supports finishing passes while still providing the durability required for longer runs. For customers machining aluminium alloys, brass and similar substrates, the tool design helps achieve repeatable surface integrity with controlled chip flow. System integration and practical handling on the shop floor The insert is part of a standard ISO indexable system and works with appropriate external holders, boring bars and clamping kits; understanding this system approach reduces tooling complexity and spare‑part overhead. The 3.97 mm thickness and 11 mm size fit a wide range of common holders, enabling flexible use across turning centres. As an uncoated carbide option, it also allows operators to assess edge behaviour and process windows before moving to specialised coated grades, supporting cost‑effective process development. For high‑precision turning with an uncoated carbide TH10 edge, contact Metav Werkzeuge for expert advice and rapid supply — info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6802858 SKU: 6802858-Tungaloy Manufacturer article number: 6802858 Manufacturer SKU: TUN6802858 Brand: Tungaloy Facts Corner radius: 0.8 mm Included angle: 55° Thickness: 3.97 mm Size: 11 mm Relief angle: 7° Versions / Special features Shape: rhombic Grade: TH10, uncoated carbide Chipbreaker: single‑sided Hole style: cylindrical hole + one‑sided countersink (40°–60°) Application: Turning (external and internal) System notes: ISO‑standard insert; holder compatibility determined by form, relief angle, tolerance class, clamping method, size and thickness FAQ What materials is this insert suitable for? The DCGT11T308 TH10 insert is intended primarily for non‑ferrous materials and operations where an uncoated carbide edge supports low cutting forces and a clean finish. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength compared with smaller radii while still allowing fine surface quality; it suits finishing and light‑to‑medium turning duties. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO standards, and compatibility depends on matching holder form, relief angle, tolerance class, clamping method, size and thickness. What is the hole and screw arrangement for clamping? The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for secure, repeatable clamping in compatible toolholders. Can this insert be used for internal turning? The geometry and grade support both external and internal turning when correct holder selection and clearance are ensured. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGT 11T308 TH10 Wendeplatten - Tungaloy
DCGT 11T308 TH10 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy Die DCGT 11T308 TH10 ist eine ISO-genormte rhombische Drehwendeschneidplatte für präzises Außen- und Innendrehen von Nichteisenwerkstoffen und ähnlichen Anwendungen DCGT 11T308 TH10 von Tungaloy Universalsorte für Nichteisenwerkstoffe Rhombische Form mit 55° Winkel Einseitiger Spanbrecher für saubere Späne Mit zylindrischem Loch und Senkung Niedrige Schnittkräfte dank unbeschichtetem Hartmetall Die TH10-Sorte setzt auf unbeschichtetes Hartmetall, das bei vielen Nichteisenwerkstoffen niedrigere Schnittkräfte und saubere Oberflächen ermöglicht. Vorteile sind geringere Spanbildung und reduzierte Vibrationsneigung bei höheren Schnittwerten. Anwender profitieren von einfacher Prozessführung und verbesserter Oberflächengüte, ohne besondere Beschichtungsanforderungen beachten zu müssen ISO-Kompatibilität und Hinweise zur Halterauswahl ISO-Genormte Platten erfordern passende Halter; die Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. In einem typischen Systemaufbau sind ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben enthalten oder separat bereitzustellen. Wer Halterwechsel plant, sollte diese Parameter prüfen, um Wiederholgenauigkeit und Prozessstabilität sicherzustellen Technische Formmerkmale mit Praxisnutzen Die rhombische Plattenform mit 55° Winkel und einem Eckenradius von 0,8 mm erlaubt vielseitige Schnitte bei guter Zugänglichkeit, während die Plattendicke von 3,97 mm ausreichende Stabilität bietet. Das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgt für sichere Befestigung. Der einseitige Spanbrecher unterstützt eine definierte Spanform und erleichtert das Spänehandling in der Fertigung Mit der TH10-Sorte von Tungaloy die Bearbeitungsqualität erhöhen und Prozesskosten senken – für Bestellung, Lieferbarkeit oder individuelle Werkzeugempfehlungen erreichen Sie Metav Werkzeuge per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6802855 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: DCGT11T308 TH10 Tungaloy-Wendeplatte Hersteller SKU: TUN6802855 SKU: 6802855-Tungaloy Fakten Eckenradius: 0,8 mm Plattendicke: 3,97 mm Plattengröße: 11 mm Winkel: 55° Freiwinkel: 7° Besonderheiten Material: Hartmetall Sorte: TH10 Schneidstofftyp: unbeschichtetes Hartmetall Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Anwendung: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben ISO-Bezeichnung: 11T308 FAQ Für welche Werkstoffe ist die Platte geeignet? Die DCGT11T308 TH10 Tungaloy-Wendeplatte ist für Nichteisenwerkstoffe optimiert und eignet sich besonders dort, wo geringe Schnittkräfte und saubere Oberflächen gewünscht werden Wie wähle ich den passenden Halter aus? Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; prüfen Sie diese Kriterien und nutzen Sie einen passenden Außenhalter oder eine Bohrstange im ISO-System Ist die Schneidkante beschichtet? Bei der DCGT11T308 TH10 kommt unbeschichtetes Hartmetall zum Einsatz, wodurch die Sorte niedrigere Schnittkräfte und gute Oberflächen ohne Beschichtung liefert Welche Maße und Winkel sind relevant? Die Platte hat einen Eckenradius von 0,8 mm, einen Plattenwinkel von 55° und einen Freiwinkel von 7°, Plattendicke 3,97 mm Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCGW 070200 DX140 Wendeplatten - Tungaloy
The combination of PCD grade DX140 for extended tool life, ISO-standard geometry for reliable holder compatibility and the very low clearance angle delivers consistent high-speed aluminium machining with minimal downtime; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCGW 070200 DX140 turning insert (PCD) for turning — Tungaloy The DCGW070200-DIA DX140 is an ISO-standard PCD turning insert designed for high-speed external and internal turning of aluminium and other non-ferrous or abrasive non-metals. PCD grade DX140 for extended tool life ISO-standard rhombic shape with 55° geometry 7° clearance and cylindrical hole plus countersink Optimised for aluminium and non-ferrous metals Increase uptime with a wear-resistant PCD grade The PCD grade DX140 cutting material offers exceptionally long tool life when machining aluminium and other abrasive non-metals, enabling sustained high cutting speeds and fewer insert changes. The diamond-based cutting edge resists abrasive wear far better than conventional coatings, which translates into more consistent part quality and longer uninterrupted production runs. As a result, machining cycles become more predictable and planning for tool replacement is simplified. Precise fit and secure clamping for stable cutting Built to ISO dimensions, the insert’s 55° rhombic geometry and 7° clearance ensure defined engagement with compatible holders; the insert size is 07 with a plate thickness of 2.38 mm, and the fastening hole is a cylindrical hole with one-sided countersink (40°–60°). These measurable parameters allow a straightforward match to matched external holders or boring bars, providing reliable clamping and repeatable positioning that support dimensional accuracy and surface finish across batches. Application-focused performance for turning processes Designed for both external and internal turning, this ISO-series insert pairs the DX140 chipformer with the appropriate holder and process settings to control chip shape and evacuation. The DIA chipbreaker is particularly effective with soft, stringy aluminium alloys and abrasive non-metals, reducing the risk of built-up edge and helping to maintain a consistent cutting force. When combined with a suitably rigid setup and correctly selected feed and speed, process stability and product quality improve measurably. System considerations and integration into your tooling setup The working system comprises the ISO turning insert plus a suitable external holder or boring bar, a shim/clamping set and replacement screws. Compatibility is determined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness, so selecting a matching holder is essential for safe, productive machining. For inventory and traceability the article number and manufacturer SKU are available for ordering and reordering, ensuring rapid replacement in production environments. For precision aluminium turning select the Tungaloy DX140 PCD insert and contact Metav Werkzeuge for tailored application support and rapid supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6802859 Manufacturer SKU: TUN6802859 SKU: 6802859-Tungaloy Brand: Tungaloy Facts Geometry angle: 55° Clearance angle: 7° Insert size: 07 Plate thickness: 2.38 mm ISO code: 070200 Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: Hartmetall Cutting material: polykristalliner Diamant (PCD), grade DX140 Chipbreaker: DIA Model series: ISO turning inserts Typical application: external and internal turning Suitable for: aluminium, non-ferrous metals and abrasive non-metals Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness System components: matching external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert best suited for? The DCGW070200-DIA DX140 Tungaloy turning insert (SKU 6802859-Tungaloy) is optimised for aluminium, other non-ferrous metals and abrasive non-metals, where the PCD cutting material delivers superior wear resistance. How does the DX140 PCD grade affect machining performance? The DX140 PCD grade provides extended tool life and consistent edge performance during high-speed turning, which reduces insert changes and helps maintain repeatable surface quality with the DCGW ISO insert. Which holders are compatible with this ISO insert? Compatibility requires a holder that matches the insert’s form, 55° geometry, 7° clearance, size 07 and 2.38 mm thickness; clamping systems designed for ISO rhombic inserts with a cylindrical hole and countersink will be suitable. Can this insert be used for both external and internal turning? Yes, the ISO design of the DCGW insert supports both external and internal turning operations when paired with the correct external holder or boring bar and process parameters. What is the purpose of the DIA chipbreaker? The DIA chipbreaker is tailored to produce controlled chips when machining soft or abrasive materials such as aluminium, improving evacuation and reducing the likelihood of chip-related interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGW 070202 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of long tool life, high cutting speeds and ISO compatibility for efficient aluminium and non‑ferrous turning. Order the Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application-specific cutting data and availability. DCGW070202 DX120 Tungaloy turning insert — PCD, ISO rhombic 07, 7° relief The DCGW070202 DX120 is an ISO‑standard turning insert designed for high‑speed machining of aluminium, non‑ferrous alloys and abrasive non‑metallics in both external and internal turning applications. Polycrystalline diamond (PCD) grade DX120 ISO‑standard rhombic insert 07 size 7° relief angle for stable turning Cylindrical hole with 40°–60° countersink Maximise productivity with PCD for aluminium and non‑ferrous alloys The combination of PCD cutting material and the DX120 grade allows considerably higher cutting speeds compared with conventional carbide grades, which directly reduces cycle times. In practice, this means fewer tool changes and lower tooling cost per component when machining aluminium and other non‑ferrous materials. The result is a measurable productivity gain and predictable tool life under stable machining conditions. Secure seating and repeatable geometry for consistent parts As an ISO‑compliant rhombic insert, the plate is specified to mate with holders by form, relief angle, tolerance class, fixation, size and thickness. That standardisation simplifies tool management: compatible holders and shims ensure a rigid clamping interface, consistent cutting geometry and repeatable results across batches. This predictability supports process control and reduces setup time in production environments. Geometry tuned for versatility and surface quality The rhombic plate shape with an included angle of 55°, a 7° relief and a corner radius of 0.2 mm provides a balance between edge strength and the ability to produce fine surface finishes. The insert is supplied without a chipbreaker, so chip control must be addressed through toolholder selection and cutting parameters; the cylindrical hole with one‑sided countersink (40°–60°) ensures reliable fastening and axial location in standard clamping systems. A plate thickness of 2.38 mm and the 07 size offer a compact solution for confined or precise turning tasks. Durable substrate and system‑level practicality The construction combines a carbide substrate with a PCD cutting layer, giving the insert excellent wear resistance when cutting soft, abrasive or non‑ferrous materials. Long tool life and stable wear behaviour reduce downtime and the frequency of insert changes. The recommended system comprises the ISO turning insert, a matching external holder or boring bar, plus underlay/shim and replacement screws to maintain clamping integrity and ease of maintenance. Contact Metav Werkzeuge for tailored cutting data, stock information and application advice for the Tungaloy DCGW070202 DX120 turning insert: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6802861 Manufacturer SKU: TUN6802861 SKU: 6802861-Tungaloy Name: DCGW070202 DX120 Tungaloy turning insert Model series: ISO‑Drehwendeschneidplatten Intended use: Turning Cutting material: Polykristalliner Diamant (PCD) Substrate material: Hartmetall Facts Included angle: 55° Relief angle: 7° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 07 Hole: with hole; cylindrical hole + one‑sided countersink (40°–60°) Special features Grade: DX120 Shape: rhombic Chipbreaker: none Typical application: external and internal turning Suitable for: aluminium, non‑ferrous metals, abrasive non‑metallics System components: compatible holder or boring bar, underlay/shim, clamping set, spare screws FAQ Which materials is the DCGW070202 DX120 best suited for? The DX120 grade with a PCD cutting layer is optimised for aluminium, non‑ferrous alloys and abrasive non‑metallics, offering high cutting speeds and extended tool life when used under appropriate conditions. Is this insert ISO‑standard and which size is offered? Yes, the insert is ISO‑compliant in a rhombic 07 size; compliance ensures compatibility with appropriately specified holders and clamping systems. Does the insert include a chipbreaker and how does that affect use? The plate is supplied without a chipbreaker; chip control should be achieved via holder geometry and cutting parameters when using the Tungaloy turning insert. What geometrical features support fine surface finish? The combination of a 55° included angle, 7° relief and 0.2 mm corner radius supports good surface finish while retaining sufficient edge strength for productivity. What system components are required for safe operation? A matching external holder or boring bar, underlay/shim and a proper clamping set with replacement screws are required to secure the ISO insert and ensure repeatable, rigid mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCGW 070202 DX140 Wendeplatten - Tungaloy
Take advantage of the DX140 PCD grade and ISO-compliant geometry for higher cutting speeds and extended tool life; the rhombic 07 form with a 0.2 mm corner radius and secure hole design ensures reliable clamping and consistent surface finish. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. DCGW070202 DX140 turning insert (Tungaloy) — PCD grade for aluminium and non-ferrous materials The DCGW070202 DX140 is an ISO-standard indexable turning insert designed for external and internal turning of aluminium, non-ferrous alloys and abrasive non-metals, offering high-speed capability and durable wear resistance. PCD grade DX140 for high cutting speeds ISO rhombic 07 form, 55° cutting geometry Cylindrical hole with single-sided countersink Very long tool life and abrasion resistance Higher throughput with polycrystalline diamond technology The core advantage of this indexable insert is the polycrystalline diamond (PCD) cutting material in grade DX140, which enables substantially increased cutting speeds when machining aluminium and other non-ferrous alloys. PCD provides a very hard, wear-resistant cutting edge that reduces flank wear and maintains a consistent cutting geometry over prolonged runs. For production environments this translates into fewer tool changes and more parts produced per shift, directly improving process efficiency and reducing downtime. Reliable clamping and stable machining results Secure fixation is ensured by the cylindrical hole with a single-sided countersink (40°–60°), designed to match standard ISO-compatible holders. The insert’s rhombic 07 shape and 55° cutting angle deliver predictable chipflow and accessibility in both external and internal turning. Compatibility with a holder depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; these parameters allow integration into existing tool systems with consistent repeatability and minimal set-up time. Predictable surface quality and application fit The 0.2 mm corner radius and the PCD cutting edge combine to produce fine surface finishes on aluminium and similar materials while tolerating abrasive constituents better than conventional carbide grades. Because the DX140 grade is optimised for non-ferrous and abrasive non-metals, the insert supports a broad range of applications where both high metal removal rates and good finish are required. For customers less familiar with diamond tooling, PCD can be understood as a bonded diamond layer on a supporting substrate that removes material mechanically rather than through thermal softening. Practical integration and handling for production use The insert’s 2.38 mm thickness and ISO designation 070202 facilitate straightforward inventory management and replacement. The absence of a built-in chipbreaker in this design means process parameters—feed, depth of cut and cutting speed—should be matched to the workpiece and machine rigidity for optimal chip control. The system build typically includes the ISO indexable insert, a matching external holder or boring bar, a locating pad or clamp set and replacement screws, ensuring an all-round approach to installation and maintenance planning. Contact Metav Werkzeuge today to discuss suitability for a specific turning task, request further technical details or reserve stock; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802862 Manufacturer SKU: TUN6802862 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Material: cemented carbide Cutting material: polycrystalline diamond (PCD) ISO designation: 070202 Core data Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting edge angle: 55° wpl_iso_2: 070202 Special features Grade DX140 optimised for aluminium and non-ferrous materials Rhombic 07 insert form Cylindrical hole with single-sided countersink (40°–60°) No chipbreaker Long tool life and improved wear resistance Suitable for external and internal turning Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The DCGW070202 DX140 insert uses a PCD cutting material in grade DX140, making it particularly suited for aluminium, other non-ferrous alloys and abrasive non-metallic materials. How does the insert secure in the holder? Clamping is provided via the cylindrical hole with a single-sided countersink (40°–60°); when combined with an ISO-compatible holder and correct clamp set, the insert offers stable fixation and repeatable positioning. Is a chipbreaker included with this insert? This insert is supplied without a chipbreaker, so chip control should be achieved by selecting appropriate cutting parameters and tooling strategy for the application. What practical benefits does the DX140 grade deliver on the shop floor? DX140’s diamond cutting edge offers extended tool life and high cutting speeds on non-ferrous materials, reducing tool change frequency and increasing net machining time. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCGW 070202 TH10 Wendeplatten - Tungaloy
The combination of uncoated carbide TH10 and ISO‑standard geometry delivers low cutting forces and consistent surface quality, making it a practical choice for efficient turning operations; order the insert via Metav Werkzeuge or contact our consultants for application support. DCGW070202 TH10 ISO turning insert (rhombic 07) — Tungaloy The DCGW070202 TH10 is an ISO‑standard rhombic turning insert designed for external and internal turning, optimised for non‑ferrous materials and operations requiring low cutting forces. ISO‑standard rhombic insert 07 Uncoated carbide grade TH10 for low cutting forces 0.2 mm corner radius for fine finishing Cylindrical hole with single‑side countersink Reduced cutting forces for cleaner finishes The uncoated grade TH10 is formulated to provide a low cutting force profile while maintaining a sharp, reliable cutting edge. As an uncoated carbide insert, it reduces built‑up edge formation on softer, non‑ferrous workpieces and supports a cleaner surface finish with less tendency to smear. The result is predictable chip formation and stable machining when used in appropriate setups, translating into reduced rework and improved process efficiency for routine turning tasks. Geometry engineered for repeatable precision A rhombic 07 form with a 0.2 mm corner radius and a 7° relief angle gives a balance between finish quality and cutting stability. The 55° included angle provides versatility for both external profiling and light internal turning operations, while a plate thickness of 2.38 mm ensures sufficient edge support under normal cutting conditions. These geometric parameters are ISO‑compatible, simplifying selector decisions for standard toolholders and enabling consistent, repeatable results across production batches. Secure mounting and straightforward handling The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping in a matching holder or boring bar. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness; when matched correctly, the design reduces vibration and improves edge stability. The absence of an integrated chipbreaker means the insert relies on tool geometry and process parameters for chip control, allowing flexibility in cutting strategy and easier edge preparation when required. Best suited applications and material range Designed specifically for turning (external and internal), this insert performs particularly well on non‑ferrous materials and applications where a sharp, uncoated edge promotes low cutting forces and fine surface quality. The no chipbreaker configuration is advantageous where chip form is managed by feed/speed selection or where minimal edge deformation is required. Use the insert where predictable cutting behaviour and straightforward edge control are priorities, especially in finishing and medium‑duty production runs. For application advice or to procure the DCGW070202 TH10 insert from Tungaloy, contact Metav Werkzeuge for personalised guidance and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6802860 SKU: 6802860-Tungaloy Manufacturer SKU: TUN6802860 Brand: Tungaloy Model series: ISO turning inserts Material: Carbide Numbers / Core technical data Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 55° Size: 07 Designs / Special features Rhombic shape Cylindrical hole with single‑side countersink 40°–60° Uncoated carbide, grade TH10 No chipbreaker For external and internal turning ISO‑compatible geometry FAQ What materials is this insert suitable for? The DCGW070202 TH10 insert is intended primarily for non‑ferrous materials; the uncoated carbide grade TH10 supports low cutting forces and clean surfaces. Can the insert be used for both external and internal turning? Yes, the rhombic 07 form and 55° included angle make this Tungaloy turning insert suitable for both external and internal turning operations when paired with a compatible holder. How does the lack of a chipbreaker affect machining? With no chipbreaker, chip form is managed through cutting parameters and tool geometry; the TH10 grade benefits operations that require minimal edge deformation and controlled cutting forces. Which holder features are necessary for correct compatibility? Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; ensure the holder matches the insert’s ISO geometry and the cylindrical hole with single‑side countersink. Is the cutting edge coated? The DCGW070202 TH10 is an uncoated carbide insert, chosen for applications where a sharp, low‑force cutting action and clean finish are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com