DCMT 11T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the precise finishing performance of a dedicated cermet grade combined with ISO compatibility and a compact 0.4 mm nose radius for reliable surface quality and stable chip control; order or request application advice via Metav Werkzeuge for fast, informed supply. DCMT 11T304 NS9530 ISO turning insert – Tungaloy, uncoated cermet for finishing The DCMT11T304 NS9530 is an ISO rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and a geometry optimised for continuous cuts and small depths of cut. ISO rhombic insert DCMT 11T304 format Uncoated cermet grade NS9530 for fine finishing 0.4 mm nose radius for precise surface finish 7° clearance angle and cylindrical hole seating Optimised finishing performance for steel components The NS9530 grade is supplied as an uncoated cermet, developed for low cutting forces and a sharp cutting edge that improves surface appearance in finishing stages. The result is reduced need for secondary operations and consistent part quality when machining steels. Because the grade is tailored for continuous cutting and small depths of cut, predictable tool life and surface integrity are achieved when feeds and speeds are matched to the alloy and rigidity of the setup. This focus on performance supports efficient production planning and fewer rework cycles. Geometry and mounting that simplify setup and repeatability The rhombic plate form with ISO designation ensures compatibility with standard turning holders; seating is provided via a cylindrical hole with a one‑sided countersink (40°–60°), and the compact 0.4 mm nose radius delivers a fine finish without sacrificing edge strength. The insert has a 7° clearance angle, thickness 3.97 mm and size 11, which together determine how the insert engages the workpiece and mate with clamping systems. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; correct matching reduces vibration and promotes repeatable results. Chip control, recommended use and material match A single‑sided chipbreaker is provided for controlled chip formation during finishing passes. For steels, the combination of the NS9530 cutting material and the sharp edge geometry produces low cutting forces and improved surface roughness; this makes the insert especially suitable for components requiring tight surface specifications. Where intermittent cutting or interrupted cuts are expected, select a holder and parameters that maintain support at the cutting edge. Cutting conditions should be chosen conservatively for the best balance of finish and tool life. System setup and operational benefits A complete machining system is composed of the ISO insert, a compatible external holder or boring bar, a shim or clamping set and replacement screws. This ISO‑based approach simplifies inventory and replacement strategies and enables quick swaps during tool changes. Stable chip formation and the finishing orientation of the grade promote consistent part quality and machining reliability, supporting high first‑pass yields and less downstream inspection. When tool life is maximised by appropriate feeds and speeds, overall productivity and process stability are improved. For precision finishing with Tungaloy’s NS9530 grade, rely on Metav Werkzeuge for application guidance and supply—contact Metav Werkzeuge for technical consultancy and fast delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6998487 Manufacturer SKU: TUN6998487 Cutting material: uncoated cermet (NS9530) Facts ISO designation: DCMT11T304 Insert size: 11 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic plate form Single-sided chipbreaker Designed for finishing of steel Compatible with ISO turning holders and shank tools System components: insert, external holder/boring bar, shim/clamp, replacement screws FAQ What materials is this insert best suited for? The DCMT11T304 NS9530 insert is formulated as an uncoated cermet grade for finishing steel, providing low cutting forces and an excellent surface finish when used under continuous cutting conditions. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius delivers a balanced contact area that improves surface quality while maintaining edge strength; with the NS9530 grade, this helps to achieve finer finishes on turned components. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening, size and thickness; the insert is made to ISO standards for use with matching turning holders or boring bars. Is this insert suitable for interrupted cuts? The DCMT11T304 is optimised for continuous finishing cuts; for interrupted cutting, select a robust holder and adjust cutting parameters to ensure edge support and to protect the sharp cutting edge. What is the correct seating for the insert? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for seating; ensure the clamping set and replacement screws conform to the holder specifications for secure fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 NS9530 Wendeplatten - Tungaloy
DCMT11T304 NS9530 Tungaloy-Wendeplatte — Drehwendeschneidplatte für Drehen Die DCMT11T304 NS9530 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für das Schlichten von Stahl beim Drehen. DCMT11T304 NS9530 von Tungaloy Rhombische Platte 11 mm mit Eckenradius 0,4 Freiwinkel 7° für scharfe Schlichtkanten Mit Loch und zylindrischer Senkung 40°–60° Unbeschichtetes Cermet für feine Oberflächengüte Wirtschaftliche Schlichtbearbeitung von Stahl Dank der NS9530-Sorte als unbeschichtetes Cermet liefert die Platte besonders niedrige Schnittkräfte und eine konstant hohe Oberflächengüte. Die Kombination aus scharfer Schneidkante und optimierter Spanbildung reduziert Nacharbeit und Schleifaufwand, was hohe Prozessdurchläufe wirtschaftlicher macht. Die Platte eignet sich speziell für kontinuierlichen Schnitt und kleine Zustellungen. Passgenauigkeit und Kompatibilität für ISO-Halter Als Teil der ISO-Modellserie ist die Platte auf normierte Abmessungen ausgelegt; das gewährleistet Austauschbarkeit und einfache Vorrichtungswahl. Mit 11 mm Plattengröße und 3,97 mm Plattendicke sowie der rhombischen Form passt sie in viele Standard-Außenhalter. Diese Maßhaltigkeit vereinfacht die Vorrichtungsplanung und verkürzt Rüstzeiten im Serienbetrieb. Montagefreundliche Details und Spanführung Die Platte kommt mit Loch und einer zylindrischen Senkung (40°–60°), was die Schraubbefestigung vereinfacht und reproduzierbare Sitzbedingungen schafft. Der einseitige Spanbrecher formt die Späne gezielt, erklärt: ein Spanbrecher bricht den Span in kleine Stücke, verhindert Aufwickeln und verbessert die Spanabfuhr. Dies reduziert Werkzeugabbrüche und erhöht Standzeiten. Zielgruppe und typische Einsatzfälle Die Platte ist entwickelt für Betriebe, die präzise Drehen für Außen- und Innendrehen von Stahl benötigen, insbesondere in der Feinbearbeitung und Serienfertigung. Werkzeugmacher, Zerspanungsbetriebe und Lohnfertiger profitieren von der Kombination aus Bedienerfreundlichkeit und verlässlicher Schnittqualität. Für präzise Schlichtaufgaben empfiehlt sich die Beratung zur Auswahl der passenden Schneidstoffsorte und des Halters — Anfragen per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 sind willkommen. Produktmerkmale Artikelnummer: 6998474 SKU: 6998474-Tungaloy Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DCMT11T304 NS9530 Tungaloy-Wendeplatte Daten Plattengröße: 11 mm Plattendicke: 3,97 mm Eckenradius: 0,4 mm Freiwinkel: 7° Winkel: 55° Besonderheiten Material: Hartmetall Sorte: NS9530 (Schlichtsorte für Stahl) Schneidstofftyp: unbeschichtetes Cermet Spanbrecher: einseitig Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen FAQ Welche Werkstoffe lassen sich mit dieser Wendeplatte bearbeiten? Die DCMT11T304 NS9530 Tungaloy-Wendeplatte ist als Schlichtsorte für Stahl ausgelegt und liefert bei unlegierten und legierten Stählen sehr gute Oberflächenergebnisse. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die ISO-genormte DCMT11T304 NS9530 eignet sich für Außen- und Innendrehen; die Rhombusform und der Freiwinkel unterstützen vielseitige Halterlösungen. Wie beeinflusst der einseitige Spanbrecher die Zerspanung? Der einseitige Spanbrecher der DCMT11T304 steuert die Spanform gezielt, verhindert lange Späne und verbessert so die Prozessstabilität bei kontinuierlichem Schnitt. Welche Artikelnummer und SKU gehören zu diesem Artikel? Die Herstellerartikelnummer lautet 6998474; die SKU ist 6998474-Tungaloy. Bei Rückfragen zur Teileverfügbarkeit bitte diese Kennung angeben. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT 11T304 NS9530 Wendeplatten - Tungaloy
Take advantage of a purpose-built finishing solution that combines a sharp uncoated cermet grade and precise geometry for consistent surface quality and low cutting forces; order direct via Metav Werkzeuge or consult the specialists for application support. DCMT 11T304 NS9530 – ISO rhombic turning insert for finishing (Tungaloy) The DCMT 11T304 NS9530 is an ISO rhombic turning insert engineered for precision finishing of Stahl, offering a sharp cutting edge and optimised cutting behaviour for continuous cuts and small depths of cut. ISO rhombic turning insert for finishing Uncoated cermet NS9530 for low cutting forces 0.4 mm corner radius for refined surface finish 7° clearance and 55° lead angle for stability Countersunk central hole, 3.97 mm thickness High-precision finishing with low cutting forces The NS9530 grade is an uncoated cermet developed for fine finishing of Stahl; it delivers a sharp cutting edge with low cutting forces, which produces a high surface finish on continuous turning operations. This finishing grade reduces the risk of built-up edge at light feeds and small depths of cut, so the machining process becomes more stable and predictable. For production environments where surface integrity is critical, this insert allows a reliable balance between productivity and part quality. Geometry tuned for repeatability and clamping security The ISO rhombic form and the 55° lead angle combine to give predictable chip flow and dimensional control when used in compatible external holders. The 0.4 mm corner radius is selected to improve surface finish while preserving edge strength for small-immersion passes. A 7° clearance angle reduces rubbing and heat generation at the flank face. The central feature is a cylindrical hole with a one-sided countersink (40°–60°), enabling secure clamping; the insert thickness of 3.97 mm supports stable seating under cutting loads. These geometric parameters are decisive for reproducible part results and straightforward holder selection. System compatibility and practical application guidance This ISO insert is designed to be used as part of a system consisting of an appropriate external holder or boring bar, a locating shim or clamp set and replacement screws. Compatibility with a given holder is determined by form, clearance angle, tolerance class, fixation method, size and thickness; matching these criteria ensures correct seating and performance. The single-sided chipbreaker is intended for finishing chip control; choose chipbreaker and grade according to workpiece material, cutting mode and machine rigidity. For indexable-insert workflows, the insert integrates with standard ISO tooling concepts and simplifies inventory logistics. For application advice or to request supply of Tungaloy DCMT 11T304 NS9530 finishing inserts, please contact Metav Werkzeuge for tailored recommendations and availability. Technical Data Article number: 6998619 Manufacturer SKU: TUN6998619 SKU: 6998619-Tungaloy Model series: ISO turning inserts Facts Shape size: 11 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Lead angle: 55° Design / Special features Uncoated cermet grade NS9530 Rhombic insert (DCMT) Central hole with cylindrical bore and one-sided countersink (40°–60°) Single-sided chipbreaker Compatible with ISO-standard holders; check form, clearance, tolerance, fixation, size and thickness FAQ What workpiece materials is this insert suitable for? The DCMT 11T304 NS9530 insert is a finishing grade intended primarily for Stahl machining; the uncoated cermet composition provides a sharp edge and is optimised for continuous cuts and fine feeds. How does the 0.4 mm corner radius affect the machined surface? A 0.4 mm corner radius smooths the transition between passes, improving surface finish while maintaining adequate edge strength during small-depth finishing passes with the DCMT 11T304 NS9530 insert. Which holders are compatible with this ISO insert? Compatibility depends on insert form, clearance angle, tolerance class, fixation method, size and thickness; the insert is made for ISO-standard external holders that accept DCMT-style rhombic inserts. What advantage does the uncoated cermet NS9530 offer in finishing operations? The uncoated cermet NS9530 provides a sharp cutting geometry with low cutting forces and excellent surface quality in finishing; it is particularly effective for continuous turning and small cuts. Is the insert suitable for interrupted cuts or heavy roughing? The DCMT 11T304 NS9530 is optimised for finishing and continuous cuts; for interrupted or heavy roughing operations, a tougher and possibly coated grade should be selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated cermet cutting edge and a fine 0.4 mm nose radius for consistent finishing results in turning operations. Order the DCMT11T304 NS9530 insert directly via Metav Werkzeuge or consult our specialists for application guidance. DCMT 11T304 NS9530 — ISO turning insert (uncoated cermet) by Tungaloy The DCMT11T304 NS9530 is an ISO‑standard rhombic insert engineered for finishing operations in turning, offering a sharp edge and low cutting forces for superior surface quality. ISO‑standard rhombic geometry Uncoated cermet for fine finishing 0.4 mm nose radius for precision Single‑sided chipbreaker, continuous cuts Achieve finer surfaces with low cutting forces The insert is an uncoated cermet grade NS9530, designed specifically as a finishing grade for steel where a high surface finish is essential. Cermet combines ceramic hardness with metallic toughness, enabling a sharp cutting edge that lowers friction and reduces the energy needed for cutting; this results in low cutting forces and improved component integrity. For operations with continuous cuts and small depths of cut, this geometry supports consistent surface quality and reduces the need for rework, improving overall process reliability. Fast integration thanks to ISO conformity and robust geometry Being ISO‑designated with a rhombic form, the insert ensures straightforward compatibility with standard toolholders when form, relief angle, tolerance class, fixation, size and thickness match. The 55° included angle and 7° relief angle provide a balanced contact zone between insert and workpiece, while the 3.97 mm thickness contributes to dependable clamping stability. The presence of a cylindrical hole with single‑side countersink (40°–60°) secures the insert in the pocket and simplifies repeatable indexing during production changeovers. Predictable chip control and dimensional precision A single‑sided chipbreaker combined with a 0.4 mm nose radius translates into better chip formation and stable cutting when running finishing passes. The chipbreaker geometry helps guide swarf away from the cutting zone, reducing the risk of surface damage and improving process safety. The modest nose radius balances surface finish and profile accuracy: small radii yield finer finishes with minimal radial engagement, ideal for precision turning and fine-tolerance features. For operators less familiar with insert selection, the function of the chipbreaker and radius can be summarised as measures that optimise chip evacuation and surface consistency during low-depth finishing cuts. Contact Metav Werkzeuge for tailored application advice on the Tungaloy DCMT11T304 NS9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and availability Technical data Article number: 6789583 Manufacturer SKU: TUN6789583 SKU: 6789583-Tungaloy Material: Cemented carbide Model series: ISO turning inserts Application: Turning Core technical data Corner radius: 0.4 mm Included angle: 55° Relief angle: 7° Thickness: 3.97 mm Insert size: 11 mm Manufacturer item number: 6789583 Special features Rhombic shape Cylindrical hole with single‑side countersink (40°–60°) Single‑sided chipbreaker Uncoated cermet grade NS9530 Designed for finishing steel, continuous cuts and small depths of cut ISO designation DCMT11T304 Compatibility depends on holder form, relief, tolerance class, fixation, size and thickness FAQ What materials is this insert intended for? The DCMT11T304 NS9530 uncoated cermet is intended primarily for finishing operations on steel, providing a sharp edge and low cutting forces tailored to continuous cuts and small depths of cut. Which toolholders fit this insert? Compatibility is achieved with standard ISO holders that accept the DCMT 11 size and match the insert’s form, relief angle and thickness; the hole and countersink ensure secure clamping. What is the nose radius and how does it affect the finish? The nose radius is 0.4 mm; this small radius supports a high surface finish while maintaining dimensional control on fine turning passes. Is the insert single‑sided or double‑sided? This insert features a single‑sided chipbreaker, enabling focused chip control and predictable performance for finishing cuts. Does the insert include a clamping hole and countersink? Yes — the insert has a cylindrical hole with a single‑side countersink designed between 40° and 60°, facilitating secure and repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 NS9530 Wendeplatten - Tungaloy
Combining the NS9530 uncoated cermet grade with a 0.4 mm nose radius and ISO compatibility delivers consistent fine finishes and low cutting forces for continuous turning operations; order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge team for application guidance and availability. DCMT11T304 NS9530 indexable insert for turning — uncoated cermet, 0.4 mm radius | Tungaloy The DCMT11T304 NS9530 indexable insert is a finishing-grade turning insert engineered for external and internal turning of steel, offering a sharp cutting edge and low cutting forces for small depths of cut. Finishing grade for steel accuracy Sharp cutting edge for high surface finish ISO-compatible 11 size rhombic insert Precise finishing and consistent surface quality The combination of the NS9530 uncoated cermet grade and a 0.4 mm nose radius provides a measurable advantage when fine surface quality is required. The sharp cutting edge reduces ploughing and diminishes cutting forces, which is particularly beneficial in continuous-turning applications and when small depths of cut are used. As a result, cycle times remain predictable and downstream polishing or rework is minimised, supporting efficient production flow and improved part conformity. Secure fit and predictable mounting in ISO systems Compatibility with toolholders is governed by form, relief angle, tolerance class, fastening method, size and thickness; this insert’s rhombic geometry, 55° cutting angle and 7° relief angle ensure a standardised seating in ISO turning holders. The insert’s cylindrical hole with a one-sided countersink (40°–60°) and the nominal thickness of 3.97 mm contribute to reliable clamping and repeatable positioning, reducing set-up variability and enabling stable cutting conditions across multiple tool changes. Controlled chip formation for continuous cuts This grade is optimised for steel and paired with a one-sided chipbreaker designed for continuous chip evacuation in finishing passes. The combination of insert geometry and chip control promotes a predictable chip flow that protects the workpiece surface and the cutting edge, lowering the likelihood of built-up edge and minimising scrap. Where machining stability is limited, selecting the appropriate chipbreaker and cutting parameters preserves tool life and maintains consistent dimensional accuracy. Practical benefits for machining productivity Using a finishing insert made of carbide with a cermet composition improves wear resistance at moderate cutting speeds while preserving a fine edge for superior finishes. The standard ISO designation facilitates straightforward stock management and compatibility with many common holders, which supports quick replacement and minimal machine downtime. For shops seeking reproducible finishes and shorter post-process work, this insert represents a pragmatic balance between surface quality and process reliability. Metav Werkzeuge can supply recommended cutting parameters and batch availability to aid process integration. For tailored application advice, cutting-parameter recommendations and current availability of Tungaloy DCMT11T304 NS9530 indexable inserts, contact Metav Werkzeuge for expert support and ordering assistance. Technical data Article number: 6998481 Manufacturer SKU: TUN6998481 SKU: 6998481-Tungaloy Model series: ISO turning indexable inserts Designation: DCMT11T304 Core data Radius: 0.4 mm Insert size: 11 Thickness: 3.97 mm Cutting angle: 55° Relief angle: 7° Corner radius: 0.4 mm Features Material: carbide Grade/coating: NS9530 uncoated cermet Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning (external and internal) FAQ Which materials is this insert best suited to machine? The DCMT11T304 NS9530 Tungaloy indexable insert is a finishing grade optimised for machining steel, offering low cutting forces and high surface quality in continuous cutting conditions. Is the NS9530 grade coated or uncoated? The NS9530 grade is an uncoated cermet, designed to maintain a sharp cutting edge for fine finishing work. What holder characteristics are required for correct fitment? Compatibility depends on matching the insert form, 55° geometry, 7° relief angle, tolerance class, fastening method and nominal thickness; ISO turning holders sized for 11 are suitable when these parameters align. What are the nose radius and thickness of the insert? The insert has a 0.4 mm nose radius and a thickness of 3.97 mm, suitable for small depths of cut and finishing passes. How does the chipbreaker affect performance? The one-sided chipbreaker encourages controlled chip flow during continuous turning, supporting consistent surface finish and reducing the risk of built-up edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility for consistent turning results. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. DCMT11T304 NS9530 DCMT Turning Insert (Tungaloy) A DCMT11T304 NS9530 turning insert designed for ISO‑standard external and internal turning, optimised for fine finishing on steel ISO rhombic insert DCMT 11T304 NS9530 cermet finishing grade 0.4 mm nose radius for fine surface 7° clearance angle for low cutting forces Consistent fine finishing and measurable productivity gains The NS9530 grade is an uncoated cermet developed for finishing operations on steel where a sharp cutting edge and low cutting forces are essential. This composition delivers a combination of excellent surface quality and reduced built‑up edge tendency during continuous cuts. As a result, cycle times can be optimised without compromising part finish, which supports more predictable process windows and higher overall throughput in serial turning applications. Secure seating and ISO compatibility for reliable operation Designed to the ISO plate form DCMT and supplied with a cylindrical hole and single‑side countersink (40°–60°), the insert ensures secure clamping in compatible toolholders. The rhombic shape and the specified 7° clearance angle reduce radial cutting pressures and improve chip flow when paired with appropriate chipbreaker geometry. Compatibility with ISO holders depends on form, clearance angle, tolerance class, fixing method, size and thickness, so selection of the matching holder and clamping set is recommended to maintain repeatable assembly and machining accuracy. Practical selection advice for finishing on steel With a 0.4 mm nose radius and a thin 3.97 mm plate thickness, the insert is optimised for small depths of cut and continuous finishing passes. The one‑sided chipbreaker suits stable cutting conditions and helps control chip shape for predictable evacuation. When choosing this grade for a turning task, consider machine rigidity, cutting speed and feed: a stable set‑up with appropriate feeds will exploit the NS9530 finishing characteristics to achieve superior surface integrity and dimensional consistency. The designation DCMT11T304 indicates the geometry and size for straightforward tooling specification. Contact Metav Werkzeuge today to discuss application parameters or to request matching holders and clamping sets for immediate production use Technical data Article number: 6731469 Manufacturer SKU: TUN6731469 SKU: 6731469-Tungaloy Model series: ISO turning insert series Designation: DCMT11T304 Facts Plate size: 11 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Insert angle: 55° Special features Shape: rhombic Grade: NS9530 uncoated cermet finishing grade Chipbreaker: one‑sided Hole style: cylindrical hole + single‑side countersink (40°–60°) Application: turning (external and internal) System composition: ISO insert, matching external holder or boring bar, support/clamping set and replacement screws FAQ What materials is this insert intended for? The DCMT11T304 NS9530 insert is specified as a finishing grade for steel and is optimised to provide high surface quality under continuous cutting conditions. Can the insert be used for internal turning as well as external turning? Yes, the ISO rhombic geometry and the specified chipbreaker make the insert suitable for both external and internal turning operations when the correct holder and setup are used. How does the 0.4 mm nose radius affect the finished part? A 0.4 mm nose radius supports fine surface finish and dimensional control on small depths of cut; it is particularly effective in finishing passes where surface integrity is critical. What does the hole style mean for clamping? The insert's cylindrical hole with a single‑side countersink (40°–60°) is designed for secure mechanical clamping in compatible ISO toolholders, ensuring repeatable seating and stable cutting performance. Which specifications should be matched when selecting a holder? Holder compatibility depends on form, clearance angle (7°), tolerance class, fixing method, size and thickness (3.97 mm); matching these parameters ensures reliable clamping and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, low cutting forces and consistent compatibility with ISO toolholders for reliable turning operations — order directly via Metav Werkzeuge or contact their consultants for specification support. DCMT 11T304 NS9530 — ISO turning insert for finishing (55°) — Tungaloy DCMT11T304 NS9530 Tungaloy turning insert combines a rhombic ISO geometry with an uncoated cermet grade optimised for finishing on steel components ISO rhombic insert, 55° geometry Uncoated cermet grade NS9530 0.4 mm nose radius for fine finishes Single-sided chipbreaker, with hole Consistent surface quality with low cutting forces The uncoated cermet NS9530 is a finishing grade developed for continuous cuts on steel, delivering a sharp cutting edge and low cutting forces that reduce vibration and thermal loading. This results in improved surface integrity and reproducible results across batches. The insert’s 0.4 mm nose radius supports narrow depths of cut while producing fine surface finishes, making it suitable for external and internal turning where dimensional and cosmetic quality matter. Reliable fit and secure clamping in ISO systems The ISO rhombic shape and standardised designation ensure compatibility with holders that match form, clearance, tolerance class, fastening and thickness. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) for secure screw clamping, which simplifies replacement and reduces setup time. Defined dimensions and hole style support repeatable positioning and stable machining, so set-up effort is minimised and production runs remain predictable. Application-focused material and chip control As an uncoated cermet, the grade combines wear resistance with a sharp edge geometry tailored to finishing operations. The single-sided chipbreaker promotes controlled chip formation in continuous-cut conditions and small feed rates; this reduces the risk of built-up edge and helps maintain surface finish. The insert’s design makes it particularly effective for light-duty finishing passes on turned steel components where consistent part quality is required. Practical handling, inspection and tool selection guidance With a nominal thickness of 3.97 mm and a clearance angle of 7°, this insert integrates into common ISO turning systems without altering holder geometry. Selection of the correct chipbreaker and grade for the workpiece material and machining stability remains essential: choose this grade for continuous finishing on steel, and pair it with a stable external or internal holder to exploit its strengths. Regular inspection of edge condition and secure torque of the clamping screw will sustain performance and tool life. For precision finishing with the Tungaloy NS9530 uncoated cermet insert, contact Metav Werkzeuge for application advice and ordering support — Metav Werkzeuge can provide technical consultation and delivery coordination. Technical data Article number: 6789578 Manufacturer SKU: TUN6789578 SKU: 6789578-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 11 Geometry angle: 55° Countersink range: 40°–60° Special features ISO rhombic plate (DCMT11T304) Uncoated cermet grade NS9530 Single-sided chipbreaker With cylindrical hole + single-sided countersink Designed for external and internal turning Suitable for continuous finishing cuts on steel FAQ Which applications suit this insert best? The DCMT11T304 NS9530 Tungaloy insert is optimised for finishing in external and internal turning operations on steel, particularly where continuous cuts and high surface quality are required. What does the NS9530 grade offer compared with standard carbide? The NS9530 uncoated cermet provides a sharper cutting edge and reduced cutting forces versus many carbides, improving surface finish and dimensional stability in finishing passes with small depths of cut. How is the insert clamped in the holder? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for screw clamping; this ensures secure, repeatable seating in compatible ISO holders. Are there specific holder requirements for the rhombic DCMT geometry? Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness; a matching ISO rhombic external or internal holder is required for correct seat and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 NS9530 Wendeplatten - Tungaloy
Durable uncoated cermet insert with a 0.4 mm corner radius and ISO rhombic form for consistent finishing performance; benefits include low cutting forces and excellent surface quality. Order this indexable turning insert directly via Metav Werkzeuge or consult our technical advisors for application support. DCMT11T304 NS9530 Tungaloy turning insert (finishing grade, 0.4 mm radius) DCMT11T304 NS9530 is an indexable turning insert for precision finishing operations in steel, designed for ISO-compatible holders and small depths of cut. ISO rhombic insert DCMT11T304 for turning Uncoated cermet NS9530 for fine finishing 0.4 mm corner radius, 7° clearance angle Central hole with cyl. recess and 40°–60° countersink Precision finishing for demanding steel turning The uncoated cermet NS9530 finishing grade provides a sharp, wear-resistant cutting edge tailored to steel finishing. With a 0.4 mm corner radius and 7° clearance, the geometry reduces cutting forces and supports continuous cuts, producing a finer surface finish with less burr and reduced secondary operations. Cermet grades are valued for edge stability and abrasion resistance at finishing speeds; this results in predictable tool life and consistent component quality in repeated runs. ISO compatibility and secure clamping for fast setup Designed to the ISO plate form, the rhombic geometry ensures broad compatibility with standard turning holders; fit is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The insert features a central hole with a cylindrical recess and a one-sided countersink (40°–60°), giving stable clamping and repeatable seating in the pocket. With a 3.97 mm thickness, the plate offers rigidity that helps suppress vibration, improving dimensional control and repeatable surface quality in both external and internal turning. Reduced process costs through consistent results Choosing a finishing-grade insert reduces rework and downstream polishing thanks to its chipbreaker geometry and sharp cutting edge that control chip flow and minimise heat build-up. The single-sided chipbreaker is matched to the grade for steel applications and is best used with small feed and depth settings to exploit the low cutting forces. Backed by Tungaloy’s production standards, this solution supports a stable, predictable process that lowers overall unit cost by reducing scrap and increasing first-pass quality. Select the Tungaloy DCMT11T304 NS9530 for superior finishing results and contact Metav Werkzeuge for application advice or to secure supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998471 SKU: 6998471-Tungaloy Manufacturer SKU: TUN6998471 Model series: ISO-Drehwendeschneidplatten ISO designation: DCMT11T304 Core specifications Plate size: 11 mm Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Plate angle: 55° Hole: with hole (cylindrical recess + 40°–60° countersink) Design & special features Rhombic plate form One-sided chipbreaker Uncoated cermet NS9530 grade Intended for turning (external and internal) Compatibility depends on form, free angle, tolerance class, fixing, size and thickness Suited for continuous cuts and small depths of cut FAQ What materials is this insert suited for? The DCMT11T304 NS9530 is specified as a finishing grade for steel; the cermet composition is optimised to deliver a fine surface when turning steel components. Which clamping configuration does the insert require? The insert has a central hole with a cylindrical recess and a one-sided countersink (40°–60°), suitable for standard ISO clamping screws and pockets that match the DCMT form. What cutting conditions are recommended for best results? Use the insert for finishing with small depths of cut and steady, continuous cuts; the NS9530 grade is engineered for low cutting forces and high surface quality in these conditions. How does the NS9530 cermet improve component finish? Cermet combines a hard, wear-resistant matrix with a sharp edge that resists deformation; NS9530 maintains edge integrity at finishing speeds, producing a smoother surface and extended time between interventions. Is this insert suitable for internal turning as well as external turning? Yes, the indexable geometry and secure central clamping make the insert appropriate for both external and internal turning operations when paired with a compatible ISO holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing, reduced cutting forces and reliable compatibility for steady production results; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DCMT 11T304 NS9530 Tungaloy turning insert — DCMT, ISO 55° rhombic, 0.4 mm radius The DCMT11T304 NS9530 Tungaloy turning insert is an ISO‑standard rhombic indexable plate designed for finishing operations in turning, offering a sharp, low‑force cutting geometry for steels. ISO rhombic DCMT shape, 55° cutting angle NS9530 uncoated cermet for fine finishing 0.4 mm corner radius for high surface quality One-sided chipbreaker with locating hole Precision finishing tailored for steel turning The insert is a DCMT‑format, ISO‑standard plate optimised for finishing on steel. The NS9530 grade is an uncoated cermet formulated to deliver a high surface finish with low cutting forces, which reduces vibration and improves dimensional consistency. As a result, process stability increases during continuous cuts and when taking small depths of cut, yielding fewer reworks and a more predictable part quality. Geometry and mounting that ensure compatibility and repeatability With a 55° rhombic cutting geometry and a 0.4 mm corner radius, the geometry supports accurate profile reproduction and edge stability. The insert thickness of 3.97 mm and ISO size 11 make the plate compatible with standard external holders, while the mounting is secured through a cylindrical locating hole with a one‑side countersink (40°–60°). Compatibility with a given holder depends on form, clearance angle, tolerance class, fastening, size and thickness, which ensures reliable repeatable clamping in production environments. Chip control and cutting behaviour explained for shopfloor decisions The single‑sided chipbreaker incorporated on the insert is tuned for finishing applications and continuous cutting; it assists in producing short, controllable chips, which simplifies chip evacuation and reduces interference with the workpiece. For operations requiring a smooth surface and reduced cutting forces, the uncoated cermet NS9530 provides a sharp cutting edge and stable wear behaviour, making it a pragmatic choice for consistent finishing cycles. Operational benefits and economical considerations Using a finishing grade such as this insert improves surface quality and can extend tool life under the right cutting conditions, which saves time on downstream processes. The insert’s balanced combination of geometry and grade supports predictable performance in repetitive turning tasks, aiding machining planners who prioritise throughput and reproducibility. Selection of the appropriate chipbreaker and holder pairing remains the primary determinant of overall process efficiency. For precision finishing in turning operations, choose Tungaloy NS9530 inserts and contact Metav Werkzeuge for availability and tailored application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — technical consultation is available to ensure the correct holder and process parameters. Technical data Article number: 6997719 SKU: 6997719-Tungaloy Manufacturer SKU: TUN6997719 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Numbers / Core technical data Size: 11 Plate thickness: 3.97 mm Corner radius: 0.4 mm Cutting angle: 55° Clearance (relief) angle: 7° Designs / Special features Rhombic plate form With locating hole Cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker Grade: NS9530 Schneidstofftyp: uncoated cermet Substrate/material: Hartmetall Intended application: Turning (external and internal) Typical use: Continuous cutting and small depths of cut Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The DCMT11T304 in grade NS9530 is formulated primarily for machining steel; the uncoated cermet composition suits finishing cut regimes that prioritise surface quality and low cutting forces. Which geometry and dimensions define this insert? This rhombic insert provides a 55° cutting angle, a 0.4 mm corner radius, a thickness of 3.97 mm and ISO size 11; it also features a locating hole with a one‑side countersink for secure mounting. Is the insert coated? No, the NS9530 grade is an uncoated cermet, chosen to maintain a sharp cutting edge for fine finishing and continuous cuts. How does the chipbreaker affect machining? The single‑sided chipbreaker promotes stable chip formation during finishing, aiding chip evacuation and reducing the risk of workpiece damage in long continuous cuts. Which holders are compatible with this plate? Compatibility is defined by the plate form, clearance angle, tolerance class, fastening, size and thickness; matching these parameters with the holder specification ensures correct seating and repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T505 Wendeplatten - Tungaloy
Combine proven chip control, economical wear resistance and ISO compatibility to keep turning cycles productive; select the T505 grade for economical cast-iron machining and order the insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 11T304 T505 Tungaloy indexable insert for turning — CVD-coated carbide, 55° rhombic The DCMT 11T304 T505 is an ISO-standard turning indexable insert designed for efficient external and internal turning, particularly suited to cast-iron applications with stable chip control. ISO-standard rhombic 55° geometry CVD-coated carbide, grade T505 Optimised for cast iron machining 0.4 mm nose radius for stable finish Increased productivity through a specialised grade and coating The combination of a CVD-coated carbide substrate and the T505 grade delivers a balance of wear resistance and cutting economy for series production. This composition reduces flank wear under normal cutting speeds while allowing longer tool life compared with uncoated grades. The formulation is particularly suited to the removal of cast iron, where controlled abrasion resistance and consistent edge stability result in fewer insert changes and reduced downtime. As a result, shops gain measurable improvements in throughput and process reliability. Geometry engineered for repeatable surface quality The rhombic form with 55° geometry and a 0.4 mm nose radius provides a compromise between strength and finish capability: the sharper effective cutting angle eases chip evacuation, while the small radius supports acceptable surface finish without compromising edge robustness. The insert’s ISO-standard footprint ensures consistent seating and clamping, and the 3.97 mm plate thickness contributes to rigidity during heavier cuts. These geometric choices reduce vibration and deliver repeatable component tolerances, supporting tighter process windows on turning tasks. Compatibility that simplifies tool assembly and inventory Designed as part of an ISO insert system, the indexable plate fits a wide range of compatible external holders and boring bars; compatibility is governed by form, clearance angle, tolerance class, fixing method, size and thickness. The presence of a cylindrical hole plus single-sided countersink (40°–60°) enables secure clamping and quick replacement. Organising tooling around standardised inserts reduces the number of unique toolholders required, simplifies stock management and shortens set-up time at the machine — a practical benefit for mixed-production workshops. Chip control and application guidance for reliable turning A one-sided chipbreaker geometry is integrated to promote stable chip formation across a spectrum of cutting conditions. For interrupted cuts or less rigid setups, select a more robust holder and moderate cutting parameters; for continuous light cuts, the insert’s chip control supports higher surface quality and longer intervals between indexings. While the insert is optimised for cast iron, the combination of grade and chipbreaker makes it applicable where economic machining and predictable chip behaviour are required, helping to maintain cycle time consistency and reduce scrap. For technical advice on optimising tool life with Tungaloy inserts or to request application recommendations, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge can advise on holder pairing and cutting data for your turning tasks Technical data Article number: 6793673 Manufacturer SKU: TUN6793673 SKU: 6793673-Tungaloy Designation: DCMT11T304 Core specifications Material: Carbide Coating: CVD Grade: T505 Application: Turning Design & special features Plate size: 11 Plate form: rhombic Plate thickness: 3.97 mm Relief angle: 7° Insert angle: 55° Corner radius: 0.4 mm Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Model series: ISO indexable turning inserts FAQ What materials is this insert intended for? The DCMT 11T304 T505 insert is optimised for machining cast iron; its T505 grade and CVD-coated carbide construction were selected to provide economical performance on cast-iron workpieces. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the DCMT11T304 fits standard ISO rhombic holders designed for 55° inserts and secures via the cylindrical hole plus single-sided countersink. How does the 0.4 mm nose radius affect surface finish and tool life? A 0.4 mm nose radius offers a compromise between strength and finish: it supports improved surface quality on finishing cuts while retaining enough edge support for stable tool life in general turning operations. Is this insert suitable for interrupted cuts or unstable setups? The insert’s geometry and one-sided chipbreaker provide decent chip control, but for heavily interrupted cuts or less rigid setups, pairing with a robust holder and conservative cutting data is recommended to maintain edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T5115 Wendeplatten - Tungaloy
High-performance CVD-coated carbide and a precise 0.4 mm nose radius provide a balance of wear resistance and edge stability for cast-iron turning; combined with ISO compatibility and a secure clamping hole, this solution supports productive, repeatable turning operations. Order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge's advisors for tailored selection and delivery. DCMT11T304 T5115 Turning Insert (ISO 11T304) – CVD-coated carbide, 0.4 mm radius | Tungaloy DCMT11T304 is an ISO rhombic turning insert designed for general cast-iron turning with a single-sided chipbreaker and cylindrical hole for secure clamping CVD-coated carbide for extended tool life Universal grade optimised for cast iron machining 0.4 mm nose radius for fine finishing passes Cylindrical hole with single-side countersink for clamp fit Boosted wear resistance and stable cutting performance The CVD-coated carbide composition of this indexable insert delivers enhanced wear resistance while maintaining a robust cutting edge, characteristics that translate into longer tool life and fewer interruptions for tool changes. The T5115 grade is specified as a universal choice for cast iron, offering a reliable compromise between abrasion resistance and edge stability; this makes the insert particularly suitable where consistent surface quality and predictable tool wear are required. Explaining briefly: CVD (chemical vapour deposition) applies a hard coating layer that reduces flank wear and improves resistance to built-up edge, so customers unfamiliar with coatings can expect improved durability compared with uncoated grades. Precise geometry for secure mounting and predictable results Designed within the ISO rhombic form, the insert's dimensions and tolerances ensure compatibility with standard holders when the correct form, clearance angle, tolerance class, fastening method, size and thickness are observed. The cylindrical hole with a single-side countersink (40°–60°) facilitates stable clamping on most ISO-compliant toolholders, reducing the risk of movement under cutting loads. The 7° clearance angle and included 55° geometry support a balanced entry and effective chip flow, while the 3.97 mm thickness contributes to insert rigidity. Those looking to integrate the plate into existing tool setups will benefit from recognising that holder selection and correct clamp torque are decisive for repeatable performance. Versatile use in external and internal turning, with practical machining advantages The single-sided chipbreaker profile and 0.4 mm nose radius promote controlled chip formation and a fine surface finish during finishing or semi-finishing cuts, especially in cast-iron components. The indexable design reduces setup time and inventory complexity compared with brazed tools, enabling faster insert changes and lower overall machining downtime. For roughing, pairing the insert with a more robust chip control or a heavier nose radius is advisable; for finishing, this configuration excels at delivering consistent topography. The combination of ISO conformity and the universal T5115 grade supports versatile deployment across job-shop and production environments, improving process reliability and contributing to predictable cost-per-part metrics. For proven cast-iron productivity with Tungaloy quality, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the DCMT11T304 turning insert and order with expert advice Technical Data Article number: 6864680 SKU: 6864680-Tungaloy Manufacturer SKU: TUN6864680 Series: ISO-Drehwendeschneidplatten Core dimensions Insert size: 11 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Included angle: 55° Countersink angle: 40°–60° Design and features Material: carbide Coating / grade: CVD-coated carbide, T5115 Shape: rhombic (DCMT) Chipbreaker: single-sided Hole: with cylindrical hole and single-side countersink Application: turning (external and internal) FAQ Which materials is this insert best suited for? The DCMT11T304 T5115 insert from Tungaloy is a universal grade optimised for cast iron applications; the CVD-coated carbide composition balances abrasion resistance and edge stability for consistent performance. How does the T5115 grade influence tool life and surface quality? T5115 provides a compromise between wear resistance and cutting-edge robustness; in practice the T5115 grade helps extend tool life while maintaining a predictable surface finish on cast-iron components. What must be checked to ensure holder compatibility? Compatibility depends on the holder matching the insert's form, clearance angle, tolerance class, fastening method, size and thickness; the DCMT rhombic shape and the cylindrical hole with countersink require an appropriate ISO-compliant clamping system. Is the insert suitable for internal turning as well as external operations? Yes, the indexable geometry and chip control allow use in both external and internal turning, provided the holder assembly offers sufficient rigidity and access for the required cutting parameters. How is the insert secured in the toolholder? The insert uses a cylindrical hole with a single-side countersink to sit on the support pad and be clamped with the appropriate screw and clamp assembly, ensuring stable positioning under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T515 Wendeplatten - Tungaloy
Benefit from the CVD-coated T515 grade and the 55° rhombic geometry for productive cast-iron turning; combine reliable edge life, stable chip formation and straightforward ISO compatibility for uninterrupted machining. Order the DCMT11T304 T515 turning insert directly via Metav Werkzeuge or ask our consultants if application-specific advice is required. DCMT11T304 T515 ISO rhombic turning insert by Tungaloy — CVD-coated carbide, 55° The DCMT11T304 T515 is an ISO-standard rhombic turning insert intended for economical and stable machining of cast iron in both external and internal turning applications. ISO 55° rhombic geometry for versatile turning CVD-coated carbide grade T515 for cast iron 0.4 mm corner radius for accurate profile Cylindrical hole with single-side countersink Faster cycle times through optimised chip control and grade selection The CVD-coated T515 carbide delivers a balance between wear resistance and cost-effectiveness, making the insert particularly suited for industrial cast-iron applications where productivity matters. The coating supports controlled chip formation, which reduces the risk of built-up edge and helps maintain consistent cutting forces during long runs. For interrupted cuts or variable stability conditions, choosing the appropriate chipbreaker and setup improves component quality and shortens cycle times. This technical approach to chip management yields measurable improvements in throughput and process stability. Consistent tool life and predictable surface quality for demanding production A carbide substrate combined with the CVD layer enhances flank and crater wear resistance, contributing to predictable edge life over repeated operations. The 7° relief angle and robust cutting geometry maintain a stable cutting edge under moderate to heavy feed rates, which in turn supports a consistent surface finish on cast-iron parts. Reduced maintenance and fewer insert changes translate into less unplanned downtime and improved overall equipment effectiveness, supporting longer production runs with steady quality. Simple integration into ISO tool systems and precise seating for accuracy Being an ISO-standard insert, compatibility with holders is determined by form, clearance, tolerance class, fastening method, size and thickness. The rhombic 55° shape offers flexibility for both external and internal turning, while the 0.4 mm corner radius balances profile accuracy with edge strength. The insert measures 11 mm across the size designation, with a plate thickness of 3.97 mm and a cylindrical hole with a single-side countersink (40°–60°) for secure clamping. These dimensional details ensure predictable seating and repeatability in indexable tool systems, easing setup and reducing alignment effort. For process-stable cast-iron turning with Tungaloy's proven T515 grade and ISO-conforming geometry, contact Metav Werkzeuge for tailored recommendations and order processing. Technical data Article number: 6739800 Manufacturer SKU: TUN6739800 SKU: 6739800-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: T515 CVD-coated Application: turning Facts Insert designation: DCMT11T304 Size: 11 Thickness: 3.97 mm Relief angle: 7° Insert angle: 55° Corner radius: 0.4 mm Special features Rhombic plate form Cylindrical hole with single-side countersink (40°–60°) One-sided chipbreaker Recommended for cast iron machining ISO-standard turning insert Compatibility depends on form, clearance, tolerance, fastening, size, thickness FAQ What materials is this insert suitable for? The DCMT11T304 T515 insert by Tungaloy is recommended primarily for machining cast iron; the T515 CVD-coated carbide is optimised for economic and stable cutting of grey and nodular cast irons. Can the insert be used for interrupted cuts? Yes, the coated carbide grade and robust geometry of this turning insert support interrupted cutting when the correct chipbreaker and stable setup are selected. How does the 0.4 mm corner radius affect the process? A 0.4 mm corner radius increases edge strength and helps maintain profile accuracy; it is a compromise between finer surface finish and increased resistance to edge chipping. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, 7° relief, tolerance class, fastening and the insert dimensions (11 size, 3.97 mm thickness); use a matching ISO rhombic holder designed for DCMT inserts. What is the mounting hole type and why does it matter? The insert has a cylindrical hole with a single-side countersink (40°–60°), which ensures secure clamping and correct seating in compatible insert seats, improving repeatability and stability during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide for extended tool life and a 0.4 mm corner radius for accurate profiling to maintain process stability when machining stainless steels; order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. DCMT 11T304 T6215 turning insert for stainless steel — Tungaloy A DCMT11T304 T6215 turning insert designed for ISO-standard external and internal turning of stainless steels under stable to mildly interrupted conditions CVD-coated carbide for high wear resistance Rhombic DCMT shape with 55° cutting angle 0.4 mm corner radius for fine profiling Cylindrical hole with single-sided countersink Durable cutting performance for stainless steels The CVD-coated carbide grade T6215 delivers wear resistance optimised for the demands of machining stainless steel, extending tool life and reducing changeover frequency. The coating acts as a thermal and abrasive barrier, which keeps the cutting edge stable under continuous and slightly interrupted cuts. This stability translates directly into fewer tool interventions and more consistent production runs, supporting efficient cycle times and predictable component quality. Secure mounting and ISO compatibility for flexible setups Built to the ISO specification, the rhombic DCMT form ensures reliable compatibility with a wide range of external holders and boring bars; compatibility depends on the insert’s form, relief angle, tolerance class, clamping method, size and thickness. The 55° cutting angle and 7° relief are engineered to balance cutting force and accessibility in confined geometries, while the cylindrical hole with a single-sided countersink (40°–60°) provides positive seating and repeatable clamping. This results in stable machining across different toolholders and setups. Precision results with minimal finishing A 0.4 mm corner radius offers a compromise between strength and surface quality: small enough for accurate profiling and fine-detail work, yet large enough to protect the cutting edge during moderated depths of cut. The plate thickness of 3.97 mm contributes to rigidity and vibration damping, and the one-sided chipbreaker aids controlled chip formation on turning operations. Together these attributes support improved surface finish and dimensional consistency, reducing downstream rework and inspection time. Contact Metav Werkzeuge today for tailored advice on applying the Tungaloy DCMT 11T304 T6215 insert in specific turning tasks or to arrange supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6876415 SKU: 6876415-Tungaloy Manufacturer SKU: TUN6876415 Series: ISO turning inserts Core specifications Shape: rhombic DCMT11T304 Size: 11 Thickness: 3.97 mm Cutting angle: 55° Relief angle: 7° Corner radius: 0.4 mm Materials & features Grade: T6215 Coating: CVD-coated carbide Hole: with hole; cylindrical + single-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning of stainless steels; external and internal turning FAQ What materials is this insert suitable for? The Tungaloy DCMT11T304 T6215 insert is formulated for machining stainless steels and performs well in both external and internal turning operations where stable or mildly interrupted cutting occurs. How does the T6215 grade affect tool life? Grade T6215 with its CVD-coated carbide offers enhanced wear resistance and thermal protection, which typically extends tool life and maintains edge integrity under continuous stainless steel machining. Is the insert compatible with standard ISO holders? Yes, the rhombic DCMT11T304 form is ISO-standard; compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness for secure and repeatable mounting. What is the purpose of the 0.4 mm corner radius? A 0.4 mm corner radius provides a balance of cutting-edge strength and the ability to produce finer surface finishes, making it suitable for profiling and finishing where controlled chip flow is required. How does the hole and countersink design benefit clamping? The cylindrical hole with a single-sided countersink (40°–60°) offers positive seating and consistent clamping torque, improving repeatability and reducing insert movement during heavier passes. Can this insert be used for interrupted cuts? Yes, the insert grade and geometry are intended for stable to slightly interrupted cutting conditions; for heavily interrupted applications, consult process parameters and Metav Werkzeuge for suitability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T6215 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide T6215 grade and a compact 55° rhombic geometry delivers reliable wear resistance and consistent cutting performance for stainless steel turning; choose compatible holders and the correct chipbreaker for best results and secure assembly via the ISO interface. Order or request advice through Metav Werkzeuge for quick clarification on holder matching and availability. DCMT 11T304 T6215 DCMT turning insert by Tungaloy — CVD-coated carbide, 55° rhombic DCMT 11T304 T6215 is an ISO-designation indexable turning insert intended for external and internal turning of stainless steels under stable to slightly interrupted conditions. CVD-coated carbide T6215 for wear resistance Designed for turning of stainless steels 55° rhombic geometry, 0.4 mm nose radius Optimised for stainless steel turning and consistent tool life The insert is manufactured in a CVD-coated carbide grade T6215, which combines a hard coating layer and a tough carbide substrate to slow flank and crater wear during prolonged cutting. This configuration is especially beneficial when machining stainless steels, where built-up edge and adhesion are common challenges. The coating reduces chemical affinity and improves abrasion resistance, resulting in fewer tool changes and more predictable process windows. Such material and coating choices support efficient throughput and lower tooling costs per part. Geometry tuned for surface finish and cutting stability The 55° rhombic geometry and the 0.4 mm nose radius balance strength and finish: the relatively small nose radius maintains edge robustness in interrupted cuts while enabling acceptable surface quality in finishing passes. A 7° clearance angle helps prevent rubbing and reduces cutting forces at the flank, which stabilises the cut and helps preserve dimensional accuracy. In practice, this geometry is suitable for a range of feeds and depths of cut; choose slightly reduced depths or stabilised clamping when machining thin-walled components to avoid vibration. ISO compatibility and secure mounting for rapid tool changes Produced to the ISO designation, the insert fits holders that match form, clearance, tolerance class, fixing method, size and thickness. The plate is size 11 with a 3.97 mm thickness and a cylindrical hole with a single-sided countersink (40°–60°) for positive and repeatable seating. These features enable quick replacement, repeatable positioning and consistent chip formation with minimal set-up time. Keeping a matched set of inserts and holders reduces downtime and supports lean inventory management. Chip control and application guidance for stable results This variant features a single-sided chipbreaker engineered for stainless steels under steady or lightly interrupted conditions; the chipformer helps curl and evacuate chips to avoid re-cutting and tool edge damage. The insert suits both external and internal turning operations when installed in a compatible holder and when machining stability is ensured. For specific machining parameters and holder recommendations, assistance is available to align cutting speed, feed and depth of cut with material grade and component geometry. Contact Metav Werkzeuge for tailored advice on holder compatibility and delivery of Tungaloy DCMT 11T304 T6215 inserts — technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6876438 SKU: 6876438-Tungaloy Manufacturer SKU: TUN6876438 Facts Nose radius: 0.4 mm Insert angle: 55° Clearance angle: 7° Thickness: 3.97 mm Plate size: 11 Special features CVD-coated carbide (T6215) Rhombic insert shape (DCMT) With cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker ISO designation DCMT11T304 Application: turning of stainless steels under stable to slightly interrupted conditions FAQ What materials is this insert intended for? The DCMT 11T304 T6215 insert from Tungaloy is designed primarily for machining stainless steels, offering controlled wear behaviour and reduced tendency for built-up edge in those alloys. What does the T6215 grade provide compared with other grades? Grade T6215 is a CVD-coated carbide formulation that emphasises abrasion resistance and chemical stability at the cutting edge, which makes the insert suitable for longer tool life when turning stainless steels under stable cutting conditions. How does the 0.4 mm nose radius affect machining results? A 0.4 mm nose radius provides a compromise between edge strength and surface finish: it improves edge durability in interrupted cuts while still permitting reasonable surface quality at typical finishing feeds for turning. Which holder features are required for secure mounting? Secure mounting requires a holder that matches the ISO form and dimensions for DCMT11T304, accepts the cylindrical hole with single-sided countersink, and provides correct clamping pressure and tolerance class for repeatable seating. Can the insert be used for internal turning as well as external turning? Yes — the DCMT 11T304 T6215 insert can be used for both external and internal turning provided the chosen holder and setup ensure adequate rigidity and chip evacuation for the specific operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T6215 Wendeplatten - Tungaloy
High wear resistance from the CVD-coated T6215 grade combined with a 55° rhombic geometry ensures consistent turning performance and stable chip formation when machining stainless steels; the 0.4 mm corner radius supports fine finishing in stable to lightly interrupted cuts. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. DCMT 11T304 T6215 turning insert – Tungaloy (rhombic, 55°) The DCMT11T304 T6215 is a CVD-coated carbide insert designed for general turning, offering wear resistance and predictable chip control for external and internal turning operations. CVD-coated carbide grade T6215 55° rhombic geometry for versatile turning 0.4 mm corner radius for fine finishing Cylindrical hole with one-sided countersink Maximise uptime with a wear-resistant coating The CVD-coated T6215 grade delivers enhanced wear resistance and consistent performance in machining stainless steels under stable to lightly interrupted conditions. The chemical vapour deposition layer reduces flank wear and maintains a stable cutting edge, which means longer periods between indexings and fewer unexpected tool changes. For production environments where process stability and repeatability are priorities, this coating supports a higher effective tool life and contributes to predictable cycle times. Geometry engineered for reliable surface quality A 55° rhombic geometry combined with a 0.4 mm corner radius gives a balance between strength and finishing capability. The rhombic form provides multiple effective cutting corners and good access in both external and internal turning, while the modest corner radius helps achieve the required surface integrity without excess cutting forces. The one-sided chipbreaker is optimised for controlled swarf formation, reducing the risk of built-up edge and improving surface finish on machined parts. Designed for compatibility and easy handling The insert fits ISO-standard turning systems and is best used with a matching external holder or boring bar chosen for form, clearance angle and tolerance class. The cylindrical hole with a one-sided countersink (40°–60°) enables secure clamping and precise seating, simplifying index changes and reducing setup time. With a thickness of 3.97 mm and nominal size 11, the insert integrates into common toolholders and replacement screw sets, supporting efficient workshop workflows and minimal tool stock complexity. Contact Metav Werkzeuge for tailored tool selection or request a technical consultation on Tungaloy turning solutions by email at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6945258 Manufacturer SKU: TUN6945258 Brand: Tungaloy Model series: ISO turning inserts Designation: DCMT11T304 Facts Insert angle: 55° Thickness: 3.97 mm Size: 11 Corner radius: 0.4 mm Clearance angle (free angle): 7° Special features Material: carbide Coating: CVD, grade T6215 Shape: rhombic Chipbreaker: one-sided Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert suitable for? The insert is designed for turning stainless steels in stable to lightly interrupted conditions; the T6215 coating enhances wear resistance for such materials. Which toolholders are compatible with this insert? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the DCMT11T304 fits ISO-standard holders sized for an 11 insert. What is the purpose of the one-sided chipbreaker? The one-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing cutting forces during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade T6215, precise 55° rhombic geometry and consistent chip control, ensuring efficient turning of stainless steels with minimal tool changes; order the insert directly via Metav Werkzeuge or contact our consultants for holder matching and process advice. DCMT 11T304 T6215 — Indexable turning insert for turning applications, Tungaloy A DCMT 11T304 T6215 indexable insert developed for stable to slightly interrupted turning of stainless steels, offering wear resistance and dependable performance in ISO‑based tool systems. CVD-coated carbide grade T6215 for stainless steel Rhombic 55° geometry with 0.4 mm corner radius Single-sided chipbreaker for reliable chip control ISO-compatible with cylindrical hole and countersink Consistent wear resistance for demanding stainless‑steel turning The DCMT11T304 insert pairs a CVD-coated surface with a robust carbide substrate to increase run‑time under repetitive cutting and reduce flank wear. The T6215 grade is engineered for the specific demands of stainless steels, where workhardening and abrasive constituents can shorten tool life; the coating enhances thermal stability and abrasion resistance, which in practical terms means fewer interruptions for insert changes and more predictable batch throughput. Explaining briefly: CVD (chemical vapour deposition) applies a hard, adherent layer that protects the carbide substrate from heat and abrasive wear during continuous or lightly interrupted cuts. Geometry and dimensions that improve surface finish and accessibility The rhombic 55° geometry with a 0.4 mm corner radius and a 7° clearance provides a balanced combination of strength and accessibility for external and internal turning. A smaller corner radius offers finer edge definition for better surface finish, while the 55° approach angle helps distribute cutting forces evenly, reducing vibration on slender setups. The insert thickness of 3.97 mm and size 11 give mechanical stability in heavier engagement, and the ISO‑standard form ensures predictable seating and repeatability when paired with compatible toolholders. Controlled chip formation and straightforward integration into tool systems A single-sided chipbreaker gives reliable chip control, particularly in the medium feed and speed ranges typical for stainless steels, where chip form can otherwise be problematic. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to secure fixation and torque transmission in conventional clamping systems. As part of an ISO‑based system, the insert integrates with matching outside holders, clamping sets and replacement screws, simplifying spare‑part management. If uncertain whether this insert matches a specific holder or application, Metav Werkzeuge can provide technical advice and compatibility checks by e‑mail or phone. For consistent, process‑secure stainless‑steel turning with Tungaloy’s T6215 grade, request the DCMT 11T304 T6215 from Metav Werkzeuge or consult our team for holder recommendations and application parameters. Technical Data Article number: 6945245 SKU: 6945245-Tungaloy Manufacturer SKU: TUN6945245 Designation: DCMT11T304 Grade: T6215 Material: Carbide Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Approach angle: 55° Clearance angle: 7° Thickness: 3.97 mm Size: 11 Special features CVD coating Single-sided chipbreaker Hole: cylindrical hole with single-sided countersink 40°–60° Rhombic insert form ISO‑standard indexable insert for turning Suitable for stainless steels Compatible with matching holders, clamp sets and screws FAQ What materials is this insert suitable for? The DCMT11T304 T6215 insert is designed primarily for machining stainless steels, delivering improved wear resistance and process stability when used under the recommended cutting conditions. What is the corner radius and how does it affect surface finish? The insert has a 0.4 mm corner radius; this 0.4 mm corner radius helps achieve a finer surface finish while balancing cutting edge strength for general turning tasks. Which toolholders are compatible with this insert? The insert conforms to ISO indexable insert standards and, thanks to its form and the cylindrical hole with countersink, fits ISO‑compatible external holders and boring bars when the holder geometry and tolerance class match the insert specifications. How does the T6215 grade perform in interrupted cuts? The T6215 CVD‑coated carbide offers robust performance in stable to slightly interrupted conditions; the coating and substrate combination reduces flank and crater wear, extending useful life in such applications. How does the chipbreaker help in production? The single-sided chipbreaker shapes chips to improve evacuation and reduce re-cutting, which lowers the risk of workpiece damage and decreases machine downtime for chip clearing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of durable CVD-coated carbide, precise 0.4 mm corner radius, and ISO compatibility for reliable turning of rostfreier Stahl — a productive solution that reduces downtime and delivers consistent surface quality. Order the insert through Metav Werkzeuge or consult the technical team for holder matching and application advice. DCMT 11T304 T6215 turning insert (Tungaloy) — CVD-coated carbide, 55° A DCMT11T304 indexable insert designed for external and internal turning, optimised for turning rostfreier Stahl under stable to lightly interrupted cutting conditions. CVD-coated carbide T6215 for wear resistance Rhombic shape with 55° cutting angle 0.4 mm corner radius for fine profiles Single-sided chipbreaker, with hole + countersink Productivity gains from a wear-resistant grade The T6215 grade is a CVD-coated carbide developed to combine wear resistance with steady cutting performance. In continuous and lightly interrupted operations the coating reduces flank wear and enhances tool life, which directly lowers tool-change frequency and improves overall machine uptime. For production-focused environments this grade balances edge stability with the ability to maintain a consistent surface finish on rostfreier Stahl, making it a sound choice where predictable results are required. Geometry tailored for chip control and access A rhombic geometry with a 55° cutting angle provides good access to profiles and grooves while maintaining favourable cutting forces. The 0.4 mm corner radius helps to produce fine radii and reduces edge chipping when moderate feeds are used. The single-sided chipbreaker assists with controlled chip formation in turning tasks, and the insert’s central hole with a cylindrical bore and a one-sided countersink (40°–60°) ensures secure clamping and repeatable positioning in compatible holders. Clear compatibility and application guidance Belonging to the ISO turning indexable insert family, this item is compatible with holders that match the insert form, free angle, tolerance class, fixing method, size and thickness. Selection of the correct chipbreaker and grade should be aligned with workpiece stability and cutting parameters; matching a rigid holder and correct clamping parts ensures the DCMT11T304 T6215 insert performs as intended. The system typically comprises the insert, a suitable external holder or boring bar, a shim or clamp set and replacement screws. Economical machining with consistent surface quality Choosing a coated hardmetal insert that offers stable chip formation and broad material suitability leads to lower rework rates and more consistent components from batch to batch. The combination of a wear-resistant coating and robust edge geometry supports longer tool life and repeatable dimensions, which is advantageous for subcontractors and production shops aiming for reliable cycle times and predictable costs per part. The manufacturer’s focus on productive machining underpins this insert’s role in efficient turning operations. Contact Metav Werkzeuge for application-specific advice, holder matching and to order the DCMT11T304 T6215 insert directly — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6876419 Manufacturer SKU: TUN6876419 Model series: ISO turning indexable inserts Material: Carbide Core data Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 7° Plate thickness: 3.97 mm Plate size: 11 mm Design & features Shape: rhombic Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Grade/coating: T6215 (CVD-coated) Application: turning FAQ What materials is this insert suited for? The Tungaloy DCMT11T304 T6215 insert is specified for machining rostfreier Stahl under stable to lightly interrupted conditions; the T6215 grade offers wear resistance suitable for that material family. How does the 55° geometry influence machining? A 55° rhombic geometry provides improved access to profiles and reduces radial cutting forces, which helps maintain dimensional stability during turning with this insert. What does the central hole and countersink provide? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating in appropriately designed holders for indexable inserts. Which components are required for a complete system? A complete setup generally includes the indexable insert, a compatible external holder or boring bar, a shim or clamp set and replacement screws to secure the insert in the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, a robust 0.4 mm nose radius and ISO compatibility for efficient, repeatable turning of medium steels; order directly via Metav Werkzeuge or consult our specialists for holder matching. DCMT 11T304 T9215 indexable turning insert by Tungaloy — CVD-coated carbide, 55° rhombic The DCMT 11T304 T9215 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering wear-resistant performance for medium steel applications. CVD-coated carbide grade T9215 Optimised for medium steel machining 55° rhombic insert with 0.4 mm nose radius Cylindrical hole with 40°–60° countersink Increased productivity through wear-resistant coating and grade The combination of a CVD-coated surface and the T9215 carbide grade delivers elevated wear resistance while retaining good fracture toughness, which supports longer cutting intervals in serial production. For turning of medium-grade steels the insert performs well under continuous to light interrupted cuts, enabling more consistent cycle times and reduced index changes. The coating protects the substrate at elevated temperatures and reduces built-up edge formation, translating into steadier surface finishes and fewer unplanned tool changes. Secure seating and geometry that improves process stability The 55° rhombic geometry and 0.4 mm nose radius balance strength and finishing capability: the angle reduces radial cutting forces for stable external turning, while the modest radius maintains edge resilience for general purpose operations. The 7° relief angle ensures the insert clears the workpiece to prevent rubbing, and the standard ISO form guarantees interchangeability with compatible holders. A cylindrical hole with a 40°–60° countersink provides reliable clamping and repeatable seating, simplifying index changes and maintaining concentricity in demanding setups. Practical selection and handling for consistent results With a plate thickness of 3.97 mm, the insert offers sufficient stiffness for robust cuts while remaining easy to index when required. The single-sided chipbreaker supports controlled chip formation for many turning tasks; select the chipbreaker and cutting data according to material, setup rigidity and feed to get the best balance between tool life and surface quality. Compatibility depends on holder form, free angle, tolerance class, fastening and size, so confirmation of the matching holder and clamping hardware is recommended to ensure optimal performance and safe operation. For high-productivity turning with a trustworthy brand, request the Tungaloy DCMT 11T304 T9215 from Metav Werkzeuge or have our experts check holder compatibility and process fitment. Technical data Article number: 6772451 Manufacturer SKU: TUN6772451 SKU: 6772451-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: DCMT11T304 Core specifications Size: 11 mm Thickness: 3.97 mm Nose radius: 0.4 mm Relief angle: 7° Insert angle: 55° Hole: with hole; cylindrical plus one-sided countersink (40°–60°) Special features Material: carbide, CVD-coated Grade: T9215 Chipbreaker: one-sided Plate form: rhombic Application: external and internal turning Suitable for: continuous to light interrupted cuts Compatibility determined by form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The insert is optimised for medium steel applications; the Tungaloy DCMT 11T304 T9215 grade and CVD-coated carbide construction provide wear resistance suitable for standard and alloy steels. How does the 55° geometry affect cutting performance? A 55° rhombic geometry reduces radial cutting forces and improves stability in turning operations, making the insert appropriate for general-purpose external and internal turning with a good balance between strength and finish. What does the 0.4 mm nose radius mean for surface finish and strength? A 0.4 mm nose radius offers a compromise between robustness and surface quality: it resists premature chipping while allowing acceptable surface finishes at typical turning feeds. Is the insert compatible with standard ISO holders? The insert follows ISO conventions; compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness—confirm these parameters to ensure correct seating for the DCMT 11T304 T9215. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with a single-sided countersink (40°–60°) provides reliable clamp engagement and repeatable positional accuracy when used with the correct clamping set and screw configuration for ISO indexable systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide T9215 for extended wear resistance with a rhombic 55° geometry and precise 0.4 mm corner radius yields high productivity and reliable chip control; order the inserts directly via Metav Werkzeuge or consult our tooling specialists for optimal tool pairing. DCMT 11T304 T9215 — Tungaloy indexable turning insert, 55° rhombic DCMT11T304 T9215 is a CVD-coated carbide indexable insert designed for external and internal turning in medium steel applications CVD-coated carbide grade T9215 Rhombic 55° geometry for versatile turning 0.4 mm corner radius for fine profiling Cylindrical hole with 40°–60° countersink Consistent productivity through advanced grade and coating The T9215 grade combines CVD-coated carbide chemistry with a balanced substrate to offer high wear resistance alongside fracture toughness. This combination supports continuous and light interrupted cuts, reducing tool changes and improving cycle times. For series production, the result is predictable tool life and fewer unscheduled stops, which directly benefits throughput and overall machining economy. Stable cutting performance with ISO compatibility and secure clamping Designed as an ISO indexable turning insert, the plate matches common holder geometries by form, size and thickness, ensuring repeatable seat location and clamping stability. The rhombic 55° geometry with a 7° clearance angle gives a favourable approach for both external and internal contours, while the cylindrical hole with one-sided countersink ensures consistent screw engagement. These features translate into accurate chip formation and reliable surface finish without the need for extensive set-up adjustments. Practical selection guidance and service support for long-term use Select a matching single-sided chipbreaker and the T9215 grade when machining medium steel to exploit the grade's wear resistance and robustness. The 0.4 mm corner radius is suitable for light profiling and detail work, whereas the plate thickness (3.97 mm) contributes to vibration dampening in less rigid setups. For precise tooling integration and application advice, Metav Werkzeuge provides technical consultancy to help align insert choice with holder, workpiece stability and cycle requirements — ensuring efficient, repeatable results. For tailored cutting-tool selection and to arrange supply of Tungaloy DCMT11T304 T9215 inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for immediate technical assistance and procurement support Technical data Article number: 6772446 SKU: 6772446-Tungaloy Manufacturer SKU: TUN6772446 Model series: ISO indexable turning inserts Name: DCMT11T304 T9215 Tungaloy insert Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 55° Special features Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Coating: T9215 CVD-coated carbide Application: Turning Typical use: external and internal turning of medium steel FAQ What materials is this insert best suited for? The DCMT11T304 T9215 insert from Tungaloy is optimised for medium steel, where the CVD-coated carbide grade T9215 provides a balance of wear resistance and toughness. Which holder compatibility should be checked before fitting the insert? Compatibility depends on holder form, clearance angle, tolerance class, size and thickness; ensure the chosen ISO-compatible turning holder matches the DCMT11T304 geometry and clamping method. How does the 0.4 mm corner radius affect part finish? A 0.4 mm corner radius delivers finer profile definition and improved surface integrity on turned features, while still offering adequate edge strength for continuous to lightly interrupted cuts. Is this insert suitable for interrupted cuts? Yes; the T9215 grade and the insert geometry are suitable for continuous and light interrupted cuts, providing a dependable compromise between wear resistance and fracture toughness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable breakage safety and ISO compatibility for uninterrupted production; the CVD-coated carbide grade T9215 ensures productive turning performance and long tool life — order the DCMT11T304 T9215 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 11T304 T9215 — Turning indexable insert, 55° rhombic, CVD-coated carbide (Tungaloy) A DCMT11T304 T9215 Tungaloy indexable insert designed for ISO-compliant turning, optimised for medium steel machining and productive continuous to slightly interrupted cuts Rhombic 55° geometry CVD-coated carbide T9215 0.4 mm corner radius Single-sided chipbreaker Higher productivity through durable coating and grade The insert combines a CVD-coated carbide body with the T9215 grade to deliver high wear resistance and enhanced breakage safety, which directly increases tool life and reduces machine downtime. For continuous or slightly interrupted turning operations, this wear-resistant composition supports longer cutting intervals and fewer index changes, improving overall process economy. The combination of coating and grade is particularly effective in medium steel machining, permitting higher cutting speeds where stability allows. Precision fit and predictable cutting geometry Built to the ISO 11T304 designation, the rhombic 55° shape and a relief angle of 7° ensure consistent engagement with appropriately matched holders. The insert’s 0.4 mm corner radius gives a defined cutting edge suitable for general finishing and semi-finishing passes, while the 3.97 mm thickness and 11 mm size provide mechanical stability in standard turning tool systems. Compatibility is determined by holder form, clearance angle, tolerance class, mounting and size, so choosing a matching outside holder or boring bar ensures repeatable results and secure clamping. Application guidance and operation advantages The single-sided chipbreaker promotes controlled chip formation in external and internal turning, improving surface finish and evacuation. This indexable insert performs best in medium steel workpieces and is set up for productive machining where continuous cutting prevails. Because the grade balances wear resistance with fracture toughness, it is a pragmatic choice for manufacturers seeking a reliable everyday insert that reduces scrap risk and supports stable batch production. For setups with slight interruptions, the insert maintains edge security while enabling competitive cutting parameters. Practical notes on selection and use When selecting an insert grade and chipbreaker, match the combination to material, cutting conditions and machine stability: the T9215 grade suits a broad range of steels, and the rhombic geometry offers versatility for both external and internal turning. The insert is supplied with a central hole featuring a cylindrical bore and a one-sided countersink (40°–60°), facilitating standard clamping systems. For newcomers, the CVD coating provides a wear-protective layer by chemical vapour deposition, which increases resistance to abrasive wear without sacrificing the substrate’s toughness. Contact Metav Werkzeuge for tailored application advice or to request the Tungaloy DCMT11T304 T9215 insert directly — our team can recommend the ideal chipbreaker and holder pairing for the intended turning task Technical data Article number: 6777776 Manufacturer SKU: TUN6777776 SKU: 6777776-Tungaloy Model series: ISO turning indexable inserts ISO designation: 11T304 Material: Carbide Coating: CVD, grade T9215 Dimensions & core data Geometry angle: 55° Corner radius: 0.4 mm Thickness: 3.97 mm Size: 11 mm Relief angle: 7° Hole/counterbore: cylindrical hole + single-sided countersink (40°–60°) Features & applications Single-sided chipbreaker Rhombic insert shape For external and internal turning Suited for medium steel machining Compatible with ISO holders defined by form and dimensions Suitable for continuous to slightly interrupted cuts FAQ What materials is this insert best suited for? The DCMT11T304 T9215 insert is optimised for medium steel machining; the T9215 CVD-coated carbide grade offers a balance of wear resistance and toughness suited to continuous turning operations. How does the chipbreaker affect performance? The single-sided chipbreaker on the insert promotes stable chip formation and evacuation, improving surface finish and reducing the risk of chip-related disturbances during turning. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, mounting method, size and thickness; use holders specified for ISO 11T304 rhombic inserts for secure clamping. What are the key geometric specifications to note? Important dimensions include the 55° rhombic geometry, 0.4 mm corner radius, 3.97 mm thickness and the 7° relief angle, which together determine the cutting behaviour and mechanical stability. Is this insert suitable for interrupted cuts? The insert is intended for continuous to slightly interrupted cuts; the T9215 grade provides fracture resistance for light interruptions but heavy interrupted cutting may require a different grade or geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T9215 grade and a 0.4 mm corner radius to achieve productive, reliable medium‑steel turning; order the DCMT11T304 insert directly via Metav Werkzeuge or consult our advisers for holder compatibility. DCMT 11T304 T9215 Tungaloy indexable turning insert — rhombic 55°, CVD‑coated carbide The DCMT 11T304 T9215 indexable insert for turning delivers a balance of wear resistance and fracture toughness, optimised for external and internal turning of medium steel. ISO‑standard 55° rhombic insert CVD‑coated T9215 grade for medium steel 0.4 mm corner radius for versatile turning Cylindrical hole with single countersink Productive performance for medium‑steel turning The CVD‑coated carbide formulation of the T9215 grade combines high wear resistance with robust fracture toughness, making this insert a strong choice for continuous and slightly interrupted cuts. With a 0.4 mm corner radius and a rhombic 55° geometry, the insert supports stable cutting forces and consistent tool life, which contributes to higher throughput and predictable process windows. These material and geometry choices are aimed at workshops and production lines that require reproducible results and minimal downtime between tool changes. Geometry and chip control that stabilise machining A clear advantage of this insert is its geometry: the 55° main cutting angle and single‑sided chipbreaker provide controlled chip formation while maintaining versatility across common turning tasks. The cylindrical hole with single countersink (40°–60°) ensures secure clamping and repeatable seating in compatible holders, reducing the risk of vibration and edge chipping. When combined with the CVD coating, this geometry helps to maintain cutting edge integrity and surface finish, especially during longer tool engagements and light interruptions in the cut. Compatibility guidance and practical application As an ISO‑standard indexable insert, compatibility with a holder depends on form, clearance angle, tolerance class, clamping method, size and thickness. The DCMT designation and the ISO code 11T304 indicate the insert form and size, while the plate thickness of 3.97 mm and size 11 must match the intended clamp seat. This insert is intended primarily for turning and is well suited to both external and internal operations on medium steel; selecting the appropriate holder and adapting cutting parameters to the T9215 grade will yield the best balance between productivity and tool life. For reliably higher productivity in medium‑steel turning, request technical advice from Metav Werkzeuge or order the Tungaloy DCMT11T304 indexable insert via Metav Werkzeuge; contact: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6774062 Manufacturer SKU: TUN6774062 SKU: 6774062-Tungaloy Brand: Tungaloy Model series: ISO indexable turning inserts Product designation: DCMT11T304 T9215 Numbers / Core Technical Data Corner radius: 0.4 mm Insert size: 11 mm Plate thickness: 3.97 mm Main angle: 55° Clearance angle: 7° Designs / Special features Material: carbide Coating/grade: CVD‑coated, T9215 Plate form: rhombic Hole: with hole — cylindrical hole + single countersink (40°–60°) Chipbreaker: one‑sided Intended application: turning (external and internal) Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ Which machining tasks is this insert designed for? The DCMT11T304 Tungaloy indexable insert is designed for external and internal turning operations, particularly suited to medium‑steel machining where continuous or slightly interrupted cuts are common. Is the T9215 grade suitable for high‑productivity applications? Yes, the T9215 grade used on the DCMT11T304 insert provides a combination of wear resistance and fracture toughness that supports high productivity while maintaining tool life under typical turning conditions. What are the key geometry details to check when selecting a holder? Check for a rhombic 55° seat, matching plate size (11) and thickness (3.97 mm), the 0.4 mm corner radius, and a mounting arrangement that accepts a cylindrical hole with a single countersink; these ensure correct seating and clamping of the insert. Which materials can be machined with this insert? The insert is optimised for medium steel; its carbide substrate and CVD coating are chosen to handle typical steels encountered in production turning. How is clamping ensured for repeatable performance? Repeatable performance with the DCMT11T304 insert is achieved by matching the insert form and dimensions to an ISO‑compatible holder and using the specified clamping hardware; the cylindrical hole and single countersink support secure, repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T304 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215, robust geometry and ISO conformity for dependable medium-steel turning; the insert delivers high wear resistance and good fracture toughness for continuous to light interrupted cuts. Order the DCMT11T304 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T304 11T304 T9215 turning insert (Tungaloy) — ISO rhombic indexable insert for turning DCMT11T304 T9215 is an ISO-standard rhombic indexable insert designed for general turning applications, optimised for medium steel and suited to continuous and light interrupted cuts. ISO rhombic insert DCMT11T304 CVD-coated carbide grade T9215 Single-sided chipbreaker, hole with countersink 7° relief, 55° included angle, 0.4 mm nose radius Consistent productivity for medium-steel turning The combination of a CVD-coated surface and the T9215 grade provides a balance of wear resistance and fracture toughness that supports productive machining of medium-strength steels. This composition reduces flank and crater wear under steady cutting conditions, which means longer service life per edge and fewer insert changes — an economic advantage in series production. The single-sided chipbreaker helps to form and evacuate chips reliably, reducing the risk of built-up edge during continuous cuts. Geometry and fit that simplify setup and improve repeatability Designed as an ISO rhombic insert with a 55° included angle and a 0.4 mm nose radius, the geometry ensures predictable engagement with a variety of standard toolholders. The 7° relief angle and the rhombic form give stable cutting performance while maintaining accessibility for external and internal turning. Compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters guarantees correct seating and repeatable results at every tool change. Process stability in continuous and light interrupted cuts The insert is intended for continuous and light interrupted cuts, where the T9215 grade demonstrates stable edge retention across typical shopfloor feeds and speeds. The robust carbide substrate resists micro-chipping and supports higher material removal rates when the process is set up correctly. For interrupted cuts at moderate severity the insert retains its integrity, making it suitable for a broad range of turning operations where both surface finish and tool life matter. Practical details that aid selection and handling The insert features a single-sided chipbreaker and is supplied with a cylindrical hole plus a one‑side countersink (40°–60°) for secure clamping; plate thickness is 3.97 mm, and the size designation is 11. These attributes make the system practical to assemble: an ISO insert, matched holder, clamp or shim and replacement screws form the complete tooling set. For users less familiar with indexable tooling, these standardised interfaces simplify procurement and inventory management while enabling fast index changes on the machine. Contact Metav Werkzeuge for application advice, quoting SKU TUN6772454 and the Tungaloy DCMT11T304 T9215 specification, to secure genuine inserts and tailored recommendations Technical data Article number: 6772454 Manufacturer SKU: TUN6772454 Label / SKU: 6772454-Tungaloy Series: ISO turning indexable inserts Facts Thickness: 3.97 mm Size: 11 Nose radius: 0.4 mm Relief angle: 7° Included angle: 55° Hole: with hole Countersink: cylindrical hole + one-side countersink (40°–60°) Special features Material: carbide Coating / grade: CVD-coated, T9215 Plate form: rhombic Chipbreaker: single-sided Application: turning (external and internal) Typical use: continuous and light interrupted cuts Compatible system: ISO insert, matching holder and clamping set FAQ What materials is this insert suitable for? The DCMT11T304 T9215 Tungaloy insert is optimised for medium steel and offers good wear resistance and toughness for general turning of such materials. How does the T9215 grade perform compared with uncoated carbide? The CVD-coated T9215 grade improves wear resistance and extends edge life compared with uncoated carbide, making it well suited to productive medium-steel turning. Which holder types are compatible with this insert? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the insert fits standard ISO rhombic turning holders designed for DCMT 11T304 geometry. Is the insert suitable for interrupted cuts? Yes — the grade and substrate provide good fracture toughness for continuous to light interrupted cuts; for heavy interruptions choose a purpose‑built grade or geometry. What is the correct way to reference the part when ordering? Reference the label or SKU (6772454-Tungaloy) or manufacturer SKU TUN6772454 and specify DCMT11T304 T9215 for unambiguous supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide (T9215) and a 55° rhombic geometry to secure high productivity and reliable tool life in medium-steel turning. The 0.4 mm nose radius and one-sided chipbreaker support consistent surface finish and chip control. Order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. DCMT 11T304 T9215 Tungaloy turning insert – ISO rhombic insert for turning, 55° geometry DCMT11T304 T9215 Tungaloy turning insert is an ISO-compliant rhombic insert engineered for external and internal turning of medium steels, compatible with ISO toolholders where form, clearance and size match. CVD-coated carbide grade T9215 55° rhombic geometry, 0.4 mm nose radius One-sided chipbreaker for medium steel ISO-compatible size 11, 3.97 mm thickness Increased productivity through wear-resistant coating and geometry The combination of CVD-coated carbide and the T9215 substrate provides a balance of wear resistance and fracture toughness that suits high-volume machining of medium-strength steels. The 55° rhombic geometry reduces cutting forces on many turning operations while the 0.4 mm nose radius enables steady surface quality without compromising edge strength. These features translate into fewer tool changes and more consistent cycle times for batch production. Predictable chip control and secure clamping for repeatable results A one-sided chipbreaker matched to the T9215 grade delivers reliable chip formation across continuous and light interrupted cuts, supporting machine uptime and operator safety. The insert is supplied with a cylindrical hole and a single countersink (40°–60°) to ensure secure clamping and repeatable seating in standard ISO clamping systems. Where stability is critical, selecting the correct holder form and tolerance class ensures the expected performance. Standardised dimensions for simple process integration The insert follows ISO sizing with a nominal size of 11, a thickness of 3.97 mm and a clearance angle of 7°, enabling straightforward replacement in existing toolsets. Standard dimensions reduce setup time and permit predictable positioning for multi-edge indexability. Use of ISO-compliant inserts simplifies inventory management and the substitution of alternative grades or chipbreakers without redesigning toolholders. Application guidance and selection advice for turning operations Designed as a first choice for medium steel turning, the T9215 grade performs well under continuous to lightly interrupted cutting conditions and where a balance of wear resistance and edge robustness is required. For heavily interrupted cuts or exotic materials, a different grade or chipbreaker should be considered. If clarification is needed on the match between holder geometry, tolerance class and process parameters, a technical review is recommended to ensure optimal results. Contact Metav Werkzeuge for tailored advice on using the Tungaloy grade T9215 DCMT11T304 insert and for prompt stock and delivery information Technical Data Article number: 6777817 Manufacturer SKU: TUN6777817 SKU: 6777817-Tungaloy Model series: ISO turning inserts Name: DCMT11T304 T9215 Tungaloy turning insert Facts Size: 11 Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Insert angle: 55° Hole style: cylindrical hole + single countersink (40°–60°) Special features Material: CVD-coated carbide (T9215) Geometry: rhombic, DCMT designation Chipbreaker: one-sided Application: Turning (external and internal) Compatibility: ISO-standard insert; holder match depends on form, clearance, tolerance class, attachment, size and thickness FAQ What materials is this insert designed for? The DCMT11T304 T9215 insert is specified primarily for medium steel machining, offering a balance of wear resistance and toughness for continuous and light interrupted turning. Which geometry and edge preparations are provided? This insert features a 55° rhombic geometry, a 0.4 mm nose radius and a one-sided chipbreaker, with a cylindrical hole plus single countersink for secure clamping. Will this insert fit my ISO holders? Compatibility is determined by the holder form, clearance angle, tolerance class, attachment method, size and thickness; the DCMT11T304 is ISO-standard and fits holders that match these parameters. What cutting conditions suit the T9215 grade? The T9215 grade is intended for productive machining of medium steels under continuous to lightly interrupted cuts, where wear resistance and edge stability are required. How should the insert be clamped and secured? The insert is supplied with a cylindrical hole and single countersink (40°–60°); use the matching clamping pad or clamping set and the correct screws to ensure repeatable seating and rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9215 carbide for high wear resistance and a rhombic 55° geometry with 7° relief for reliable external and internal turning; compatibility with ISO toolholders is ensured when form, relief angle, tolerance class, fastening, size and thickness are matched. Order the part directly via Metav Werkzeuge or ask the consultants for application-specific advice. DCMT11T304 T9215 Tungaloy – ISO turning indexable insert for turning DCMT11T304 T9215 is a rhombic ISO turning insert designed for medium steel machining, offering high productivity in continuous to lightly interrupted cuts CVD-coated carbide grade T9215 For medium steel, high wear resistance Rhombic 55° insert with 7° relief Cylindrical hole with 40°–60° countersink High productivity through robust grade and coating The combination of a CVD-coating and the T9215 carbide grade delivers a balance of wear resistance and fracture toughness that supports higher machining rates while maintaining consistent edge life. This ISO-normed insert is intended for turning operations on medium steel and performs well in continuous and lightly interrupted cuts. The specification of a coated carbide substrate means the component is optimised for productive series machining where consistent performance and predictable tool life reduce process interruptions and rework. Geometry that improves accessibility and surface finish The rhombic 55° shape with a 7° relief provides stable cutting geometry for external profiles and internal diameters where approach angles and access are decisive. A 0.4 mm corner radius moderates cutting forces and helps deliver a controlled surface finish without sacrificing strength at the cutting edge. The plate thickness of 3.97 mm and 11 mm size offer a secure seating in matching holders; the central cylindrical hole with a single-sided countersink (40°–60°) ensures positive clamping and repeatable positioning in standard clamping systems. Practical benefits from chip control and application range Equipped with a single-sided chipbreaker, this insert aids chip formation and evacuation when machining steels, reducing the risk of chip-related interruptions and improving productivity. The CVD layer enhances abrasion resistance while preserving core toughness, making the grade suitable as a first choice for medium steel workpieces where a balance between tool life and productivity is required. Selecting the correct chipbreaker and grade depending on workpiece material and machine stability yields tangible cycle-time savings in routine production. System compatibility and recommended setup The insert forms part of a system: an ISO turning plate paired with a matching external holder or boring bar, a shim/clamping set and replacement screws. Compatibility depends on insert form, relief angle, tolerance class, fastening, size and thickness, so holders must be chosen accordingly. For best results, match the T9215 grade and the single-sided chipbreaker to the material and the stability of the setup. For users unfamiliar with holder matching, providing holder geometry, tolerance class and clamping style to technical advisors will expedite selection and reduce trial adjustments. Contact Metav Werkzeuge for tailored machining recommendations and ordering information on this Tungaloy turning insert; telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6772444 SKU: 6772444-Tungaloy Manufacturer SKU: TUN6772444 Facts Radius: 0.4 mm Insert size: 11 mm Plate thickness: 3.97 mm Relief angle: 7° Lead angle: 55° Special features ISO designation DCMT11T304 Grade/sort: T9215 (CVD-coated carbide) Shape: rhombic Hole style: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ What materials is this insert suitable for? The DCMT11T304 insert in T9215 grade is optimised for medium steel machining and offers high wear resistance suitable for continuous to slightly interrupted cuts. How does the 55° geometry affect machining? A 55° rhombic approach provides improved access to shoulders and contouring operations; the geometry balances cutting forces and enables good surface finish performance. What does the T9215 grade mean in practice? T9215 is a CVD-coated carbide grade that combines abrasion resistance with sufficient toughness, making it a first choice for productive steel turning where both wear life and breakage resistance are required. Is the insert compatible with standard ISO holders? Compatibility requires matching form, relief angle, tolerance class, fastening, size and thickness; when these parameters align, the insert fits standard ISO holders and boring bars. What is the purpose of the cylindrical hole with countersink? The central cylindrical hole with a one-sided countersink (40°–60°) ensures secure, repeatable clamping and correct seat in compatible clamping systems Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com