DCMT 11T308 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide wear resistance, a 55° rhombic geometry for versatile turning, and precise chip control to keep machining stable and productive; order directly via Metav Werkzeuge or contact our consultants for tailored advice. DCMT 11T308 AH8005 DCMT turning insert by Tungaloy — PVD‑coated carbide, 55° rhombic DCMT 11T308 AH8005 is a rhombic ISO turning insert designed for external and internal turning of demanding materials, offering robust chip control and high wear resistance in stable cutting conditions. PVD‑coated carbide AH8005 Rhombic 55° geometry 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Precise geometry and consistent compatibility for turning applications The DCMT11T308 insert brings together a defined 55° approach angle and a rhombic form to deliver repeatable engagement in a wide range of turning tasks. The ISO‑standard geometry ensures compatibility with matching external holders and boring bars, where fit depends on form, clearance angle, tolerance class, fixation and plate thickness. With a PVD‑coated carbide body the component offers predictable wear behaviour, which makes tool change intervals easier to plan and reduces unexpected downtime. Durable grade and chip control for hard and heat‑resistant materials The AH8005 wear‑resistant grade is optimised for machining heat‑resistant alloys and other hard materials under stable cutting conditions. The single‑sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and lowering the risk of rework. Together, the coating and substrate support higher cutting speeds and extended tool life compared with uncoated alternatives, delivering a clear efficiency advantage on demanding workpieces. Practical mounting details and selection guidance to increase productivity With a 0.8 mm corner radius and an insert thickness of 3.97 mm, this rhombic plate suits operations where a balance between edge strength and form accuracy is required. The plate features a cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping and precise seat location. Choose the chipbreaker and grade to match workpiece material, machining type and machine stability; for further specification matching, Metav Werkzeuge can provide technical consultation and cutting data to ensure optimal setup and repeatable results. Discuss application details with Metav Werkzeuge for tailored grade and chipbreaker selection — contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request technical guidance or to arrange supply. Technical data Article number: 6747778 Manufacturer SKU: TUN6747778 Label: DCMT11T308 AH8005 Tungaloy‑Wendeplatte Core technical data Corner radius: 0.8 mm Relief angle: 7° Approach angle: 55° Thickness: 3.97 mm Inscribed circle / size: 11 mm Special features PVD‑coated carbide (AH8005) Rhombic 55° geometry Single‑sided chipbreaker Cylindrical hole + one‑sided countersink (40°–60°) ISO series turning insert For external and internal turning Suitable for heat‑resistant alloys and hard materials Compatible with matching holders, clamping sets and replacement screws FAQ What materials is this insert suitable for? The DCMT11T308 AH8005 Tungaloy insert is designed primarily for heat‑resistant alloys and other hard materials where a wear‑resistant PVD‑coated carbide grade is required. Can this insert be used for both external and internal turning? Yes, the rhombic shape and ISO‑standard geometry allow use in both external turning and appropriate internal applications when fitted to a matching holder or boring bar. How does the AH8005 grade affect machining performance? AH8005 provides enhanced wear resistance and thermal stability, which helps maintain edge life and surface quality during extended cuts in demanding materials. What clamping features does the plate have? The plate is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to ensure reliable clamping and precise seating in compatible toolholders. Is the 0.8 mm corner radius suitable for finishing passes? A 0.8 mm corner radius offers a compromise between edge strength and the ability to achieve fine surface finishes; select a smaller or larger radius depending on the required surface specification and load. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T308 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH8015 grade, a 0.8 mm corner radius and ISO compatibility to ensure consistent edge stability and extended tool life in turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. DCMT DCMT11T308 AH8015 – Indexable Turning Insert for Turning, Tungaloy (PVD-coated carbide, 0.8 mm radius) The DCMT11T308 AH8015 Tungaloy is an ISO-standard rhombic turning insert designed for general turning of heat-resistant alloys and versatile external and internal turning tasks ISO rhombic insert DCMT11T308, 55° cutting angle PVD-coated AH8015 grade for heat-resistant alloys 0.8 mm corner radius for consistent edge strength Cylindrical hole with single-side 40°–60° countersink Consistent cutting performance on heat-resistant alloys The PVD-coated AH8015 grade combines a wear-resistant coating with a tough carbide substrate to deliver a balanced performance between abrasion resistance and edge stability. This combination is particularly suited to machining heat-resistant alloys, where elevated cutting temperatures and abrasive wear can shorten tool life. The PVD layer reduces adhesion and built-up edge while the substrate maintains integrity under interrupted cuts, resulting in fewer insert changes and more predictable cycle times. The outcome is a stable cutting process that supports higher productivity without compromising surface quality. Precise fit and secure clamping for stable machining The ISO-standard geometry and rhombic shape ensure compatibility with a wide range of external holders, with fit determined by form, clearance angle, tolerance class, fastening method, size and thickness. The DCMT11T308 form with its 55° cutting angle supports versatility between finishing and light roughing, while the cylindrical hole with single-side countersink (40°–60°) enables reliable clamping and repeatable positioning. Selecting a matching holder, backing pad and correct torque for the clamping screw reduces vibration and improves repeatability, which in turn preserves cutting edge life and achieves consistent component tolerances. Process benefits: productivity, surface quality and predictable life A 0.8 mm corner radius provides a compromise between edge robustness and achievable surface finish: larger radii support higher feed rates and longer life under heavier cuts, while still allowing fine surface results when machining with appropriate feeds. The one-sided chipbreaker design channels swarf effectively for many turning scenarios, lowering the risk of chip entanglement and enhancing machine uptime. Overall, the insert’s geometry and grade contribute to fewer tool changes, reduced setup variability and a measurable improvement in throughput for batch and series production. For high-process reliability in turning applications, specify the Tungaloy AH8015 inserts via Metav Werkzeuge and contact our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored application support Technical Data Article number: 6825791 Manufacturer SKU: TUN6825791 SKU: 6825791-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Cutting angle: 55° Thickness: 3.97 mm Inscribed circle/size: 11 mm Special features Material: carbide Coating / grade: PVD-coated AH8015 Plate form: rhombic Hole: with cylindrical hole and single-side countersink (40°–60°) Chipbreaker: one-sided Typical application: turning (external and internal) ISO designation: DCMT11T308 FAQ What materials is this insert suited for? The DCMT11T308 AH8015 insert is optimised for heat-resistant alloys and provides a balanced performance between wear resistance and edge stability for those materials. Does the insert fit standard DCMT holders? Yes. The DCMT11T308 follows ISO-standard dimensions and requires a holder matched by form, clearance angle and tolerance class for secure clamping. What is the purpose of the countersunk hole design? The cylindrical hole with a single-side countersink (40°–60°) ensures reliable clamping and repeatable seating, which improves stability and repeatability during turning. Can this insert be used for both finishing and roughing? With its 55° geometry and 0.8 mm corner radius, the insert offers a compromise suitable for light roughing and finishing when process parameters and holder rigidity are appropriate. How does the AH8015 grade affect tool life? The PVD-coated AH8015 grade combines wear resistance with edge stability, reducing built-up edge and improving longevity under elevated temperatures typical for heat-resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH8015 Wendeplatten - Tungaloy
Reliable machining performance for general turning of heat‑resistant alloys is delivered by the combination of the PVD‑coated AH8015 grade and the ISO rhombic geometry; order the DCMT11T308 AH8015 insert directly via Metav Werkzeuge or consult our technical advisors for application support. DCMT11T308 AH8015 ISO rhombic turning insert for general turning (Tungaloy) The DCMT11T308 AH8015 is an ISO‑standard, rhombic turning insert designed for external and internal turning of heat‑resistant alloys and general machining tasks. ISO‑standard rhombic insert 55° geometry PVD‑coated carbide grade AH8015 One‑sided chipbreaker for predictable chips Compatible with holders using cylindrical hole Longer tool life and balanced wear for heat‑resistant alloys The PVD‑coated AH8015 grade provides a balanced combination of wear resistance and edge stability, making it a dependable choice for machining heat‑resistant alloys. The PVD‑coated surface reduces adhesive wear and improves resistance to thermal loading, which translates into longer effective tool life and fewer unexpected tool changes. For manufacturers seeking consistent component quality, this grade offers a reliable compromise between life and toughness, enabling steady cycle times in mixed production. Accurate geometry and controlled chip formation for predictable results The rhombic ISO geometry with a 55° main angle and a 0.8 mm corner radius supports a stable cutting action and favourable cutting forces during turning. The insert features a one‑sided chipbreaker, which produces predictable chip forms when matched with the correct holder and cutting parameters. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to ensure secure clamping and repeatable positioning. These design elements reduce set‑up variation and simplify process qualification for both external and internal turning. System compatibility and practical workshop benefits As part of an ISO insert system, the DCMT format is intended to work together with a suitable external holder or boring bar, shim/clamping set and replacement screws, which streamlines replacement and maintenance. The insert’s 3.97 mm thickness and rhombic form support robust seating and resistance to deflection in moderate to heavy cuts. Using standardised components reduces downtime and supports predictable batch production, helping workshops maintain throughput and achieve consistent surface finish and dimensional control. For application advice or to confirm fit with existing holders and machines, contact Metav Werkzeuge – our technical consultants will assist with specification and suitability for specific turning tasks; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6747779 Manufacturer SKU: TUN6747779 Metav SKU: 6747779-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Main angle: 55° Special features Shape: rhombic Hole: with cylindrical hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Grade: AH8015 (PVD-coated carbide) Chipbreaker: one-sided Application: Turning FAQ Is this insert suitable for machining heat‑resistant alloys? Yes. The AH8015 grade is specified for general machining of heat‑resistant alloys and provides a balanced mix of wear resistance and edge stability for the DCMT11T308 insert. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic ISO profile and the cylindrical hole with countersink make it compatible with standard DCMT external holders and boring bars. What chip form can be expected with the one‑sided chipbreaker? The one‑sided chipbreaker promotes predictable chip control when cutting parameters match the workpiece material and the selected grade; AH8015 supports stable chips in a range of heat‑resistant alloys. Can the insert handle moderate to heavy cuts? With a thickness of 3.97 mm and a robust rhombic shape, the insert provides good seating and resistance to deflection for moderate to heavy turning operations. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6747779 and the Metav SKU is 6747779-Tungaloy for the DCMT11T308 AH8015 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH8015 Wendeplatten - Tungaloy
Taking advantage of the PVD-coated carbide AH8015 and the ISO-standard DCMT11T308 form, this insert delivers a balanced mix of wear resistance and edge stability for reliable turning of heat‑resistant alloys; compatibility with ISO holders is ensured by matching form, clearance and dimensions. Order the insert directly via Metav Werkzeuge or consult the advisors for machining-matched recommendations. DCMT11T308 AH8015 – Tungaloy indexable insert for ISO turning, PVD-coated carbide, 0.8 mm radius DCMT11T308 AH8015 is an ISO‑standard rhombic turning insert designed for external and internal turning of heat‑resistant alloys and general turning operations PVD-coated carbide grade AH8015 0.8 mm corner radius for fine profiling 7° clearance angle to reduce flank rubbing ISO rhombic insert with central hole Precision and durability for demanding turning The DCMT11T308 AH8015 indexable insert combines a PVD-coated carbide matrix with a geometry optimised for consistent chip control, delivering improved tool life when machining demanding materials. The AH8015 grade is selected for its balanced behaviour between wear resistance and cutting-edge stability, which reduces tool changes and supports a steadier process flow. The rhombic form with a 0.8 mm corner radius enables fine contouring and reliable profile retention, while the moderate clearance avoids accelerated flank wear; the result is predictable component dimensions and fewer in‑process interruptions. Compatibility and mounting that simplify process planning ISO compatibility means the insert mates with holders based on form, free angle, tolerance class, fastening, size and thickness; this simplifies integration into existing tool setups. The insert’s central hole and the specified hole style—cylindrical with a single‑side countersink (40°–60°)—ensure secure clamping and repeatable seating. With a plate thickness of 3.97 mm and a nominal plate size of 11 mm, the part specification supports straightforward tool selection and reduces the need for special adapters, helping to maintain cycle time and minimise fixture complexity. Machining benefits when working with heat‑resistant alloys The cutting grade and geometry are intended as a first choice for general machining of heat‑resistant alloys, providing stable chip formation and reliable edge retention under thermal stress. The single‑sided chipbreaker offers controlled chip flow for many turning conditions, lowering the risk of built‑up edge and improving surface finish. Choosing this configuration assists in achieving consistent component quality and can contribute to higher productivity through longer intervals between indexings. Contact Metav Werkzeuge for tailored selection advice and procurement of the Tungaloy DCMT11T308 AH8015 indexable insert to match specific machining parameters and material conditions Technical data Article number: 6825768-Tungaloy Manufacturer SKU: TUN6825768 Manufacturer article number: 6825768 Model series: ISO turning indexable inserts Core data Corner radius: 0.8 mm Clearance angle: 7° Included angle: 55° Plate thickness: 3.97 mm Plate size: 11 mm Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Coating/grade: AH8015 (PVD) Material: carbide Application: turning (external and internal) Chipbreaker: single‑sided Plate form: rhombic ISO designation: DCMT11T308 Compatibility note: compatibility with holder determined by form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The DCMT11T308 AH8015 insert with PVD-coated carbide is intended primarily for machining heat‑resistant alloys and general turning tasks where a balance of wear resistance and edge stability is required. How does the 0.8 mm corner radius affect component finish? A 0.8 mm corner radius provides a finer profile for external and internal contours while helping to distribute cutting forces, which commonly results in improved surface finish and more consistent dimensional control when using the appropriate cutting parameters. Is the insert compatible with standard ISO turning holders? Yes, the ISO designation DCMT11T308 indicates standard geometry; compatibility depends on matching form, clearance angle, tolerance class, fastening and thickness—use the holder that corresponds to the ISO type for secure mounting. What does the hole style mean for clamping? The insert’s cylindrical hole with a single‑side countersink (40°–60°) enables reliable clamping and repeatable positioning in holders that accept a centrally located fastener with matching countersink support. Which SKU should be referenced when ordering? Reference the article as DCMT11T308 AH8015 with SKU 6825768‑Tungaloy (manufacturer SKU TUN6825768) to ensure the correct grade and geometry are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH8015 Wendeplatten - Tungaloy
Benefit from a combination of PVD-coated AH8015 grade and ISO conformity to achieve consistent turning of heat-resistant alloys. The rhombic DCMT11T308 insert with a 0.8 mm corner radius provides stable cutting action and predictable chip control. Order the insert directly via Metav Werkzeuge or request application advice from Metav's consultants. DCMT 11T308 AH8015 DCMT — Tungaloy ISO turning insert for general turning DCMT11T308 AH8015 is an ISO-designated rhombic turning insert intended for machining heat-resistant alloys in external and internal turning, compatible with standard ISO toolholders. ISO-compliant rhombic insert, DCMT11T308 PVD-coated carbide AH8015 for heat-resistant alloys Single-sided chipbreaker with cylindrical hole 7° clearance angle and 0.8 mm corner radius Increased process reliability for heat-resistant alloys The combination of a PVD-coated carbide substrate and the AH8015 grade balances abrasion resistance and edge stability for a wide range of heat-resistant materials. This balance reduces unexpected edge failure during interrupted or stable cuts, which translates into fewer tool changes and more predictable cycle times. The single-sided chipbreaker helps to shape chips consistently, reducing the risk of chip entanglement and improving surface finish in demanding turning tasks. Secure clamping and ISO-system compatibility Designed as an ISO turning insert, the rhombic geometry and the specified hole and countersink ensure precise seating and repeatable positioning in compatible external holders or boring bars. The cylindrical hole with a single-side countersink (40°–60°) provides reliable screw engagement and stable clamping forces, which supports dimensional consistency across batches. The standard form factor simplifies tool planning and minimises the need for special adaptors when migrating between holders. Predictable cutting performance and component quality A 0.8 mm corner radius and 7° clearance angle offer a compromise between strength and edge sharpness, enabling controlled cutting forces and favourable surface integrity for turned parts. The chip control design delivers short, manageable chips for most turning operations, supporting safer machining and less downtime for clearing. Together, these characteristics allow for economical machining with an emphasis on repeatability and component quality rather than only maximal metal removal rates. For technical guidance on the Tungaloy DCMT11T308 AH8015 turning insert or to arrange supply from Metav Werkzeuge contact info@metav-werkzeuge.com or call +49 2822 7131930 for application recommendations and ordering. Technical data Article number: 6747773 Manufacturer SKU: TUN6747773 Metav SKU: 6747773-Tungaloy Model series: ISO turning inserts Application: Turning Core specifications Size: 11 mm Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Lead angle: 55° Hole style: cylindrical hole + single-side countersink (40°–60°) Design & features ISO designation: DCMT11T308 Coating: PVD Grade: AH8015 Material: carbide Insert form: rhombic Chipbreaker: single-sided Hole: with hole FAQ What materials is this insert intended for? The DCMT11T308 AH8015 insert is formulated for general turning of heat-resistant alloys and materials requiring a balance of wear resistance and edge stability. Is the geometry compatible with standard ISO toolholders? Yes, the IC and form follow ISO norms for rhombic turning inserts, enabling use in compatible external holders and boring bars. How does the AH8015 grade affect tool life? The AH8015 grade offers an even balance of wear resistance and edge robustness, leading to reliable cutting performance and extended intervals between indexings compared with uncoated grades. What chip control can be expected from this insert? With a single-sided chipbreaker and the specified geometry, the insert produces short, manageable chips ideal for automatic chip evacuation and safer machining cycles. Which hole and clamping style does the insert use? The insert comes with a cylindrical hole and a single-side countersink (40°–60°) for positive screw engagement and secure clamping within the ISO seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide grade AH8015, a 55° rhombic geometry and a 0.8 mm corner radius to improve tool life and process stability in turning operations. Order the DCMT11T308 AH8015 Tungaloy insert directly via Metav Werkzeuge or consult the advisors for application support. DCMT11T308 AH8015 Tungaloy indexable insert — ISO turning insert, rhombic 55° (0.8 mm corner radius) The DCMT11T308 AH8015 Tungaloy indexable insert is an ISO-standard rhombic turning insert designed for general external and internal turning, offering a balanced mix of wear resistance and cutting-edge stability for heat-resistant alloys. PVD-coated carbide grade AH8015 ISO rhombic 55° geometry 0.8 mm corner radius for robustness Single-sided chipbreaker, through-hole fit Enhanced productivity through dependable cutting performance The insert delivers a reliable result where consistent tool life is essential for batch and serial machining. With a PVD-coated carbide substrate in grade AH8015, the component is tuned for a balanced combination of wear resistance and edge stability; this reduces unplanned tool changes and supports higher uptime. The rhombic 55° form provides a favourable cutting angle for a range of turning tasks, turning the insert into a pragmatic choice for shops that value throughput and predictable downtime. Designed for straightforward mounting and versatile compatibility Clamping compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the rhombic shape and the specified hole make the insert suitable for many standard external holders and boring bars. The through-hole with a cylindrical hole and one-sided countersink (40°–60°) ensures secure seating and repeatable orientation, while the 3.97 mm plate thickness contributes to stable clamping. The single-sided chipbreaker supports reliable chip control in many cutting regimes, simplifying setup and reducing process variation. Material suitability and application guidance for heat-resistant alloys The cutting grade AH8015 is intended as a first choice for general machining of heat-resistant alloys, offering a compromise between flank wear resistance and edge toughness. The 0.8 mm corner radius enhances robustness at the insert corners and is suitable for moderate finishing feeds and general-purpose turning. For users less familiar with insert selection: choose the chipbreaker and grade that match the workpiece material, the intended feed/speed range and the machine rigidity to secure the expected surface finish and tool life. For machining of heat-resistant alloys with consistent results, request the Tungaloy DCMT11T308 AH8015 indexable insert from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for availability and selection advice. Technical data Article number: 6747769 Manufacturer SKU: TUN6747769 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating/grade: AH8015 Facts Corner radius: 0.8 mm Thickness: 3.97 mm Plate size (inscribed circle): 11 Clearance angle: 7° Main angle: 55° ISO designation: 11T308 Special features PVD-coated carbide grade AH8015 Rhombic plate form, 55° geometry Single-sided chipbreaker Through-hole with cylindrical hole + one-sided countersink (40°–60°) Compatible for external and internal turning; requires matching holder and clamping FAQ What materials is this insert suitable for? The AH8015 grade in the DCMT11T308 insert is intended primarily for machining heat-resistant alloys; the indexable insert also performs well on a range of tougher alloys when matched with appropriate cutting parameters. How is the insert secured in the holder? The DCMT11T308 features a through-hole with a cylindrical bore and a one-sided countersink (40°–60°) for secure clamping in compatible holders and boring bars, ensuring repeatable seating. Can the insert be used for finishing passes? With a 0.8 mm corner radius and the AH8015 balance of wear resistance and edge stability, the insert is suitable for general finishing and medium-duty finishing passes depending on feed and machine rigidity. Is the chip control sufficient for long runs? The single-sided chipbreaker design provides consistent chip forming in many turning applications, supporting sustained production runs when parameters are tuned to the workpiece and rigidity. Which model series does this insert belong to? This item is part of the ISO turning insert series and follows ISO geometry standards for rhombic turning plates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH905 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant PVD coating, a sharp cutting edge and ISO compatibility for predictable, productive turning cycles — order the insert directly via Metav Werkzeuge or consult the team for optimised selection. DCMT11T308 AH905 ISO turning insert for turning — Tungaloy DCMT11T308 AH905 is an ISO-design turning insert developed for external and internal turning operations, offering a stable cutting edge and high process security. PVD-coated carbide grade AH905 Single-sided chipbreaker for stable chips Rhomboid insert with 55° cutting angle 0.8 mm corner radius for precise engagement Reliable performance for productive turning The PVD-coated carbide grade AH905 delivers consistent wear resistance and a refined cutting edge suited to a wide range of turning tasks. Designed for ISO compatibility, this insert supports predictable cycle times and reduced tool changes, which helps to lower non-productive time. The combination of a sharp cutting geometry and a single-sided chipbreaker promotes controlled chip formation during both external and internal turning, improving surface finish and reducing the likelihood of edge chipping. These technical properties translate directly into higher throughput and improved process stability on the shop floor. Durable grade and coating for longer tool life The advanced AH905 substrate and PVD coating provide a balance between toughness and wear resistance, making the insert appropriate where a sharp edge and process security are required. The coated hardmetal substrate resists flank wear while maintaining edge integrity, which is particularly beneficial when facing interrupted cuts or variable component batches. As a result, maintenance intervals can be extended and tool management simplified, supporting cost-effective production and consistent component quality without compromising machining performance. Practical compatibility and easy integration with holders As an ISO-format rhomboid insert, the geometry and fixation features ensure straightforward replacement in compatible holders; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness. The rhomboid shape with a 55° cutting angle and a 0.8 mm radius allows precise engagement in a wide variety of turning setups. The insert’s 3.97 mm thickness and the cylindrical hole with a single-sided countersink (40°–60°) ensure secure clamping and repeatable seating. These characteristics make selection and stock management simpler in production environments that rely on standardised tooling systems. Application guidance for better outcomes Select the single-sided chipbreaker and the AH905 grade when a sharp cutting edge and robust process reliability are priorities; this combination is particularly effective for general-purpose turning across a range of steels and cast materials. For optimal results, match the insert geometry and chipbreaker style to the workpiece material and the rigidity of the setup. When in doubt, consult machining data sheets and consider small trial cuts to fine-tune cutting parameters — this approach reduces scrap and shortens time to stable production. Contact Metav Werkzeuge for availability and tailored advice on the DCMT11T308 AH905 Tungaloy turning insert — info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and delivery options Technical data Article number: 6879342 SKU: 6879342-Tungaloy Manufacturer SKU: TUN6879342 Manufacturer: Tungaloy Model series: ISO turning inserts Dimensions & core data Cutting angle: 55° Clearance angle: 7° Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 11 mm Design & features PVD-coated carbide (AH905) Rhomboid geometry Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-compatible insert for external and internal turning Sharp cutting edge; wear- and chipping-resistant FAQ What materials is this insert suitable for? The DCMT11T308 AH905 insert is designed as a versatile turning grade; the AH905 PVD-coated carbide offers good wear resistance and process security for common steels and mixed production runs. How does the single-sided chipbreaker affect machining? A single-sided chipbreaker on this insert promotes consistent chip control and reduces the risk of entanglement, improving surface finish and stable cutting forces during turning. Which holders are compatible with this ISO insert? Compatibility requires a matching ISO rhomboid pocket and consideration of form, clearance angle, tolerance class, fastening, size and thickness; the insert’s dimensions (11 mm size, 3.97 mm thickness) and hole configuration support standard ISO holders. What is the benefit of the 0.8 mm corner radius? The 0.8 mm corner radius provides a compromise between edge strength and profile fidelity, offering precise engagement and reduced risk of edge chipping compared with very small radii. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH905 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH905 grade, the 55° rhombic geometry and the 0.8 mm nose radius to secure stable, process-safe turning with long tool life; order the DCMT11T308 AH905 turning insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. DCMT11T308 AH905 turning insert by Tungaloy — PVD-coated carbide, 55° rhombic geometry The DCMT11T308 AH905 is a PVD-coated carbide indexable turning insert designed for external and internal turning in ISO-standard tool systems. PVD-coated carbide AH905 for wear resistance Rhombic 55° geometry for versatile turning 0.8 mm nose radius for precise edge control Cylindrical hole with 40°–60° countersink Longer runtime and stable production through advanced coating The combination of a PVD-coated surface and a wear-resistant carbide substrate delivers a clear benefit in daily machining: reduced flank wear and improved resistance to chipping under interrupted cuts. The AH905 grade was developed for applications where a sharp cutting edge and high process security are required; this reduces the frequency of tool changes and helps maintain consistent cycle times. For operations that prioritise uptime and repeatable part quality, the coating and substrate pairing contributes to measurable productivity gains and lower running costs over a production run. Geometry engineered for accuracy and surface quality The 55° rhombic geometry together with a 0.8 mm nose radius and a 7° clearance angle balances edge strength with surface finish. A larger nose radius increases the contact area and typically improves surface smoothness, whereas a smaller radius sharpens the cutting edge for finishing passes; the selected radius provides a compromise that supports dimensional accuracy without sacrificing edge stability. The angled geometry reduces cutting forces in many turning setups, enabling stable behaviour in both external and internal turning applications and promoting consistent chip formation when paired with the appropriate one-sided chipbreaker. ISO compatibility and practical handling for fast tool changes These inserts conform to ISO standards for indexable turning plates, which simplifies selection of holders and reduces procurement complexity. Compatibility depends on the insert form, clearance, tolerance class, fixing method, size and thickness; the cylindrical hole with single-sided countersink (40°–60°) gives secure clamping and repeatable location in many external holder designs. The 3.97 mm plate thickness and size 11 make the insert suitable for a broad range of steel and alloy turning tasks. When selecting a holder, match the plate’s geometry and clamping style to ensure correct seat contact and torque distribution for process reliability. Practical advantages and application notes The insert’s one-sided chipbreaker is tailored for common turning strategies and promotes effective chip control when cutting parameters and workpiece material are aligned with the AH905 grade. For finishing and semi-finishing operations on medium to high-strength steels and common alloys, this combination of PVD coating, carbide substrate and optimised geometry reduces built-up edge and helps achieve consistent surface finishes. When uncertain about which chipbreaker or grade suits a specific alloy or stability condition, choosing the AH905 grade provides a robust baseline for many general turning tasks. For tailored advice on machining strategies with Tungaloy AH905 inserts and fast supply from Metav Werkzeuge, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our specialists will recommend the optimal holder and parameters for the application. Technical Data Article number: 6816931 SKU: 6816931-Tungaloy Manufacturer SKU: TUN6816931 Model series: ISO turning indexable inserts Designation: DCMT11T308 AH905 Facts Insert size: 11 Plate thickness: 3.97 mm Nose radius: 0.8 mm Approach angle: 55° Clearance angle: 7° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Coating: AH905 (PVD) Material: carbide Plate form: rhombic Chipbreaker: one-sided Typical application: external and internal turning ISO-standardised insert FAQ What materials is this insert suitable for? The DCMT11T308 AH905 insert is optimised for a broad range of steels and common alloys; the AH905 PVD-coated carbide grade offers wear resistance and edge stability for typical turning tasks. How does the 0.8 mm nose radius affect surface finish? A 0.8 mm nose radius gives a balance between edge strength and finish; the radius supports consistent surface quality while maintaining enough edge robustness for semi-finishing and finishing passes with the specified geometry. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO indexable insert conventions; compatibility is determined by insert form, clearance, tolerance, fixing method, size and thickness, so select a holder matching the DCMT form and 55° geometry. What advantage does the cylindrical hole with countersink provide? The cylindrical hole with a 40°–60° single-sided countersink improves location repeatability and clamping stability, reducing the risk of insert movement and promoting consistent cutting conditions. Can the AH905 coating withstand interrupted cuts and tougher conditions? AH905’s PVD coating and carbide substrate are designed to resist wear and edge chipping, offering improved process security under many interrupted cutting scenarios when used with the correct parameters and a suitable holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH905 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH905 substrate and a precise 0.8 mm corner radius for durable, process-secure turning; the 55° rhombic geometry supports both external and internal operations. Order the DCMT11T308 insert directly via Metav Werkzeuge or request application advice from the consultants. DCMT 11T308 AH905 indexable turning insert — Tungaloy A DCMT11T308 AH905 ISO-standard indexable insert designed for reliable external and internal turning, offering a rhombic 55° geometry and a robust PVD-coated carbide grade. PVD-coated AH905 carbide for wear resistance 55° rhombic geometry for versatile turning 0.8 mm corner radius for precise edge strength Cylindrical hole with single-sided countersink Extended tool life through modern coating and substrate The combination of a PVD-coated surface and a wear-resistant carbide substrate ensures extended cutting performance under continuous turning cycles. The AH905 grade is engineered to provide a sharp cutting edge while resisting flank wear and micro-chipping; this results in more stable tool life and fewer insert changes during production. For operations where consistent surface finish and repeatable tool life matter, this insert reduces unplanned downtime and supports predictable machining windows. Geometry and mounting that improve process stability The rhombic 55° shape, 0.8 mm corner radius and a 7° clearance angle deliver a balance between strength and accessibility for varied turning profiles. The cylindrical hole with a one-sided countersink (40°–60°) provides secure, repeatable clamping in ISO-compatible holders, while the 3.97 mm plate thickness contributes to rigidity under cutting loads. These geometric choices make the insert suitable for finishing and medium turning where edge control and stable clamping are priorities. System compatibility and application guidance for efficient integration As an ISO-standard turning insert, compatibility with the toolholder depends on form, clearance, tolerance class, fastening method, size and thickness; the insert is intended for use with a matched external holder or boring bar, appropriate shim/clamp set and replacement screw. The single-sided chipbreaker supports controlled chip formation for many common steels and alloyed materials; selecting the correct chipbreaker and grade ensures optimal chip evacuation and surface quality. For complex material mixes or specialised cycle requirements, Metav Werkzeuge can advise on holder matching and process parameters to maximise productivity. Contact Metav Werkzeuge for tailored advice on machining parameters and to order Tungaloy DCMT11T308 AH905 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability. Technical Data Article number: 6807423 SKU: 6807423-Tungaloy Manufacturer SKU: TUN6807423 Model series: ISO indexable turning inserts Material: carbide Coating / grade: AH905 Facts Insert size: 11 mm Thickness: 3.97 mm Clearance angle: 7° Insert angle: 55° Corner radius: 0.8 mm Special features Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-standard insert for external and internal turning FAQ What materials is the DCMT11T308 AH905 suitable for? The DCMT11T308 AH905 insert is optimised for a wide range of steels and alloyed materials; the AH905 PVD-coated carbide provides good wear resistance and edge stability for general turning tasks. How does the 0.8 mm corner radius influence cutting performance? A 0.8 mm corner radius increases edge strength and improves surface finish stability during medium-depth cuts when using the DCMT11T308 AH905, reducing the risk of micro-chipping at the corner. Is the insert compatible with ISO holders? Compatibility is determined by form, clearance, tolerance class, fastening and thickness; the DCMT11T308 AH905 follows ISO standards and is intended for use in matched ISO holders with the appropriate shim and clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet AT9530 grade for superior surface finish, the ISO rhombic DCMT 11T308 geometry for versatile turning, and a precise 0.8 mm corner radius that supports fine finishing operations; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific guidance. DCMT11T308 AT9530 — DCMT ISO rhombic turning insert, coated cermet, 0.8 mm radius (Tungaloy) The DCMT11T308 AT9530 is an ISO rhombic turning insert designed for fine and light finishing of steel, offering a balance of surface quality and predictable wear for precision turning tasks. Coated AT9530 cermet grade for fine finishing ISO rhombic DCMT 11T308 form for versatile turning 7° clearance and 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Single-sided chipbreaker for controlled chips Consistent finishing and surface quality that saves rework The combination of the AT9530 coating and the underlying coated cermet substrate is engineered to deliver a consistently high surface finish and even wear across runs. For finishing and light machining of steel, this composition reduces the frequency of insert changes and the need for secondary polishing, which in turn supports a smoother production flow and lower overall process variability. The result is reliable dimensional tolerance maintenance and fewer rejects in batch production. Geometry engineered for precision and secure clamping The geometrical package — ISO rhombic shape, 7° clearance, a 55° included angle and a 0.8 mm radius — is optimised for fine turning where both contact stability and edge strength matter. The insert thickness of 3.97 mm and the size 11 designation align with standard ISO holders; compatibility to the toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole with a single‑side countersink (40°–60°) ensures reproducible seating and clamp engagement, so clamping force distribution remains stable even under interrupted cuts. Controlled chip formation and application guidance for reliable machining The single-sided chipbreaker promotes defined chip control suitable for finishing passes in steel, supporting stable cutting forces and reduced built-up edge. For best results, select the chipbreaker and grade according to workpiece material, machining type and assembly rigidity. The insert is well suited to external and internal turning where surface integrity is the priority. For tailored cutting data, feed recommendations and coolant strategy, Metav Werkzeuge’s application advice helps to adapt cutting parameters to machine capability and component requirements. For tailored cutting-data recommendations or to check compatibility with a specific holder, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, practical guidance on the Tungaloy AT9530 cermet insert and availability Technical data Manufacturer article number: 6765012 Manufacturer SKU: TUN6765012 SKU: 6765012-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Specifications Shape: rhombic (DCMT) Size: 11 Thickness: 3.97 mm Clearance angle: 7° Corner radius: 0.8 mm Included angle: 55° Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Material & application Material: carbide Grade: AT9530 (coated cermet) Application: turning Typical use: finishing and light machining of steel Chipbreaker: single-sided FAQ What materials is this insert suitable for? The DCMT11T308 AT9530 Tungaloy turning insert (SKU 6765012-Tungaloy) is intended primarily for finishing and light machining of steel; the AT9530 coated cermet focuses on surface quality and uniform wear. How does the 0.8 mm corner radius affect finishing? A 0.8 mm corner radius on the DCMT11T308 insert improves edge strength for fine finishing passes while maintaining good surface integrity under typical finishing feeds and speeds. Will this insert fit my existing holder? Compatibility depends on ISO form, clearance, tolerance class, fastening method, size and thickness; the DCMT form and 3.97 mm thickness correspond to standard ISO holders but verify seat and clamp fit before assembly. What chip control can be expected from this grade and chipbreaker? With its single-sided chipbreaker, the DCMT11T308 AT9530 provides consistent chip formation for finishing cuts in steel, reducing the likelihood of tangled chips and improving process stability. Is the AT9530 grade suitable for interrupted cuts? AT9530 is optimised for finishing and light machining where surface quality is paramount; for heavy or highly interrupted cuts, consider grades and geometries designed for toughness and impact resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of GH730 wear resistance, ISO compatibility and a precise 0.8 mm corner radius for consistent turning performance; order the insert directly via Metav Werkzeuge or ask our consultants for application support. DCMT11T308 GH730 DCMT – Tungaloy indexable turning insert with 0.8 mm corner radius DCMT11T308 GH730 is an ISO‑standard indexable insert designed for general turning applications, providing a balance of wear resistance and edge stability for external and internal turning. ISO‑standard rhombic insert 11 mm Tungaloy grade GH730 carbide 0.8 mm corner radius, 7° relief Increase throughput with a wear‑resistant turning grade The GH730 grade combines toughness and wear resistance to extend tool life in diverse turning operations. As an indexable insert made from carbide, it provides a dependable cutting edge that keeps changeovers to a minimum and reduces downtime. The balanced composition of the grade supports stable chip formation and consistent surface finish, which is particularly advantageous in medium‑duty production runs where repeatability and predictable tool life are essential. Reliable edge stability for improved surface quality A stable cutting edge translates into fewer rejects and less rework. The GH730 grade is optimised to deliver a compromise between hardness and toughness: sufficient hardness for abrasion resistance and adequate toughness to resist chipping. The result is improved surface integrity on workpieces and longer intervals between indexings. When combined with the 0.8 mm corner radius, the insert offers enhanced edge strength, making it suitable for finishing passes where surface quality matters. Easy integration with standard holders and secure clamping The insert follows ISO geometries, so compatibility with a matching external holder or boring bar is determined by form, relief angle, tolerance class, fastening method, size and thickness. The rhombic plate shape and the with hole design — a cylindrical hole with a one‑sided countersink (40°–60°) — ensure reliable seating and repeatable clamping. Accurate specification of the holder and correct torque on the clamping screw deliver process stability and reduce vibration during turning. Choose the right chipbreaker and grade for the job This insert features a single‑sided chipbreaker and is intended for turning; selection of chipbreaker geometry and the GH730 grade should be matched to the workpiece material, machining conditions and required stability. For unstable setups or heavy interrupted cuts, opting for a smaller corner radius or a different chip control geometry can improve tool life. For standard external and internal turning of steels and similar materials, the combination of the GH730 grade and the rhombic ISO geometry offers a productive, economical solution. Contact Metav Werkzeuge for tailored advice on Tungaloy inserts, application recommendations and to request the item TUN6820991; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6820991 Manufacturer SKU: TUN6820991 SKU: 6820991-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DCMT11T308 GH730 Tungaloy-Wendeplatte Core measurements Corner radius: 0.8 mm Relief angle: 7° Included angle: 55° Plate thickness: 3.97 mm Plate size: 11 mm Design & special features Rhombic plate form With hole: cylindrical hole + one‑sided countersink (40°–60°) Single‑sided chipbreaker Grade: GH730 (Tungaloy) Material: carbide Intended use: turning (external and internal) ISO‑standard geometry for holder compatibility FAQ What materials is this insert suitable for? The DCMT11T308 GH730 insert is a carbide grade optimised for general turning and is suitable for machining a wide range of steels and similar materials when paired with the appropriate chipbreaker and cutting conditions. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius improves edge strength and reduces the risk of chipping during finishing operations, offering a balance between rigidity and surface finish when using the DCMT11T308 GH730 insert. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions; compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness and requires a matching ISO‑compliant holder or boring bar. What is the function of the hole and countersink? The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure seating and repeatable clamping in compatible holders, contributing to process stability when using the DCMT11T308 GH730 insert. How should the chipbreaker be selected? Select the chipbreaker based on workpiece material, machining operation and stability. The single‑sided chipbreaker on this insert is suitable for controlled chip flow in many turning tasks, but alternative geometries may be preferred for interrupted or heavy cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of predictable wear resistance, stable cutting-edge performance and ISO compatibility to maintain a steady turning process; order the DCMT11T308 GH730 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T308 GH730 — ISO turning insert (rhombic, 55°) by Tungaloy A DCMT11T308 GH730 ISO rhombic indexable turning insert for external and internal turning, designed to deliver consistent chip control and edge stability in general turning applications. Tungaloy GH730 for wear resistance and edge stability ISO rhombic insert, 55° cutting angle 0.8 mm corner radius for versatile turning Cylindrical hole + one‑sided 40°–60° countersink Reliable cutting performance for production turning The insert combines the GH730 grade with a precision geometry to provide a predictable balance of wear resistance and toughness. As a result, machining cycles benefit from fewer interruptions due to edge failure and from stable tool life, which supports longer uninterrupted runs on CNC lathes. The rhombic 55° shape and the modest 0.8 mm corner radius enable a mix of finishing and light roughing operations while preserving part tolerances and surface integrity. Compatibility and fixture security reduce set-up time This ISO indexable insert is supplied in the widely used DCMT format and is designed for use with standard external holders and boring bars; compatibility depends on form, relief angle, tolerance class, fixing method, size and plate thickness. The cylindrical hole with one‑sided countersink (40°–60°) ensures secure clamping and precise seating, reducing the risk of micro‑movement under cutting forces and simplifying insert replacement during set-up changes. Practical geometry for consistent chip formation and finish The single‑sided chipbreaker geometry suits a range of turning tasks where predictable chip flow is essential. Combined with the cemented carbide substrate and the controlled free clearance of 7°, the design promotes regular chip breakage and helps maintain a steady surface finish. Where batch consistency and repeatability are priorities, this insert offers a pragmatic compromise between robustness and fine finishing capability. For technical advice tailored to specific holder types or application parameters, contact Metav Werkzeuge — mention the Tungaloy DCMT11T308 GH730 (SKU 6820990-Tungaloy) for quick assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6820990-Tungaloy Manufacturer SKU: TUN6820990 Manufacturer item no.: 6820990 Model series: ISO indexable turning inserts Description: DCMT11T308 GH730 Tungaloy indexable insert Facts Cutting angle: 55° Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 11 Relief (free) angle: 7° Special features Grade: GH730 (Tungaloy) Material: cemented carbide Chipbreaker: single-sided Hole: cylindrical + one-sided countersink (40°–60°) Shape: rhombic (55°) FAQ Is this insert suitable for both external and internal turning? The DCMT11T308 GH730 Tungaloy indexable turning insert is intended for external and internal turning; holder compatibility is determined by form, relief angle, tolerance class, fixing, size and thickness. Which materials is the GH730 grade aimed at? The GH730 grade on the DCMT11T308 provides a balanced combination of wear resistance and toughness for a broad range of general turning tasks where edge stability and predictable wear behaviour are needed. How does the hole and countersink affect clamping? The cylindrical hole with a single‑sided 40°–60° countersink on the DCMT11T308 improves seating and clamp stability, reducing the likelihood of micro‑movement during cutting and aiding repeatable tool positioning. What does the 0.8 mm corner radius mean for machining? A 0.8 mm corner radius offers versatility: it supports light roughing and finishing while reducing the risk of chipping compared with very small radii, contributing to consistent surface finish and tool life. What are the article and SKU references for ordering? Order references are Article number 6820990-Tungaloy and Manufacturer SKU TUN6820990 for the DCMT11T308 GH730 Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 GT9530 Wendeplatten - Tungaloy
Combining a coated cermet grade GT9530 with a 0.8 mm corner radius and ISO‑standard form gives a finishing insert that delivers improved surface quality and extended tool life under stable turning conditions. Order directly via Metav Werkzeuge or consult our technical advisers for precise selection and availability. DCMT 11T308 GT9530 ISO turning insert for finishing — Tungaloy A DCMT11T308 GT9530 indexable insert engineered for fine finishing and prolonged durability in turning applications Coated cermet grade GT9530 for finishing ISO rhombic form 11 compatible with standard holders 0.8 mm corner radius for superior surface finish Cylinder hole with 40°–60° countersink for secure clamping Consistent finishing with longer tool life The GT9530 grade is a coated cermet designed for wear resistance during finishing and light universal turning of steel. Its substrate and coating combination aim to deliver a stable cutting edge and improved surface integrity, meaning fewer in‑process reworks and a more predictable tool life. The 0.8 mm corner radius supports fine edge strength without compromising finish quality, making the insert particularly suited to applications where surface tolerance and visual appearance are important. In practice, this translates to less scrap, reduced machining variation and a more efficient production flow. Precise fit and mechanical reliability in ISO systems The insert follows the ISO designation DCMT11T308 and is built to mate with ISO‑standard holders where fit depends on form, relief angle, tolerance class, clamping arrangement, size and thickness. Key geometry data such as the 7° relief angle, 3.97 mm plate thickness and the 55° included angle ensure reliable seating and repeatable chip formation when used with appropriate external holders or boring bars. The presence of a cylindrical hole with a single‑side countersink (40°–60°) facilitates secure clamping and fast index changes, which helps to maintain process stability across repeated tool changes. Application guidance and practical benefits Intended primarily for turning of steel in stable setups, the insert comes with a single‑sided chipbreaker that is matched to the GT9530 grade; selection of the chipbreaker and grade should be made according to workpiece material, machining strategy and machine rigidity. The rhombic form provides positive cutting geometry and good access to shoulders and profiles, while the coated cermet composition supports superior surface finish during finishing passes. For operational planning, choose this insert where optimised surface quality and predictable tool life are priorities — it is especially valuable in serial production and tool rooms aiming for consistent part quality. For tailored recommendations on Tungaloy cermet grades and to secure the correct DCMT11T308 GT9530 insert for specific turning tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and fast supply. Technical data Article number: 6998343 Facts Manufacturer SKU: TUN6998343 SKU: 6998343-Tungaloy ISO designation: 11T308 Form: DCMT Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 3.97 mm Size: 11 Included angle: 55° Special features Coated cermet grade GT9530 Carbide substrate Rhombic plate form Single‑sided chipbreaker Cylinder hole with single‑side countersink (40°–60°) ISO‑norm indexable insert for turning Optimised for finishing and light universal turning of steel FAQ What materials is this insert best suited to machine? The GT9530‑grade coated cermet insert is optimised for machining steel in finishing and light universal turning operations, offering good surface quality and extended wear resistance with stable setups. How does the DCMT11T308 form affect holder compatibility? Compatibility depends on the insert form, relief angle, tolerance class, clamping method, size and thickness; the DCMT11T308 geometry is ISO‑standard and fits corresponding external and boring tool holders when those parameters match. What is the purpose of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength and supports a superior surface finish on finishing passes while maintaining acceptable cutting forces for the intended applications. Can the insert be used for roughing operations? The DCMT11T308 GT9530 is engineered for finishing to light universal use; for heavy roughing, a grade and geometry optimised for high material removal rates is recommended. How is the insert clamped to ensure repeatability? The insert features a cylindrical hole with a single‑side countersink (40°–60°) that enables secure clamping and repeatable seating when paired with the correct clamping set and holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 GT9530 Wendeplatten - Tungaloy
DCMT11T308 GT9530 combines coated cermet wear resistance with an ISO-standard form and a fine 0.8 mm corner radius to deliver consistent finishing performance in stable turning setups; order through Metav Werkzeuge or consult our specialists for application-specific recommendations. DCMT11T308 GT9530 Tungaloy indexable insert for turning — 55° rhombic, coated cermet DCMT11T308 GT9530 is an ISO-standard indexable insert designed for finishing and light universal turning of steel under stable conditions DCMT11T308 55° rhombic geometry Coated cermet grade GT9530 for finishing 0.8 mm corner radius for fine surface finish Cylindrical hole with countersink for secure clamping Consistent finishing and longer tool life thanks to coated cermet technology The GT9530 coating is a cermet formulation optimised for wear resistance and surface quality in finishing passes on steel. In practice, this means fewer interruptions for insert changes and a reduced need for downstream rework. The 0.8 mm corner radius supports a fine surface finish on external and internal profiles while maintaining adequate edge strength for light to medium cuts. Where a high-quality surface and extended runtime are priorities, the coated cermet composition strikes an effective balance between abrasion resistance and cutting-edge stability. Secure clamping and straightforward integration into ISO tooling systems The insert features a cylindrical hole with a single-sided countersink (40°–60°), which ensures precise seating and repeatable clamping when paired with the correct holder. Compatibility with a toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness; this ISO conformity allows reliable interchangeability with standard external holders or boring bars. The single-sided chipbreaker supports controlled chip flow in finishing operations, reducing the risk of built-up edge under the recommended stable conditions. Clear benefits for process reliability and part quality By choosing a finish-oriented grade and a rhombic 55° geometry, the insert helps achieve consistent dimensional accuracy and an improved surface finish on turned components. The coated cermet grade is particularly suited to applications where stable cutting conditions are present—such as reduced tool overhang and rigid clamping—since these circumstances maximise the grade’s advantage in surface integrity and tool life. As a result, production runs can present fewer rejects and more predictable cycle times. Practical system setup and support for application decisions The system typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement fixing screws; keeping spare clamps and screws on hand reduces downtime during index changes. For specific workpiece materials or atypical setups, selection of chipbreaker and grade should be matched to cutting parameters and machine stiffness. If further technical data or machining recommendations are required, Metav Werkzeuge is available to advise by email or phone: info@metav-werkzeuge.com, +49 2822 7131930 Contact Metav Werkzeuge for tailored guidance on using the DCMT11T308 GT9530 insert in finishing applications and to arrange swift supply or consultancy Technical data Article number: 6731468 Manufacturer SKU: TUN6731468 Manufacturer item number: 6731468 Facts Shape: rhombic, 55° Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 3.97 mm Plate size: 11 Hole: with hole, cylindrical + single-sided countersink (40°–60°) Design & features Grade: GT9530 (coated cermet) Material: cemented carbide Single-sided chipbreaker ISO-standard indexable turning insert Intended application: turning (external and internal) Compatible with external holders or boring bars; requires matching clamp/shim and screws FAQ Is this insert suitable for finishing steel components? Yes. The DCMT11T308 GT9530 is a finish-to-light universal grade optimised for steel, offering improved surface quality and longer tool life under stable machining conditions. How does the GT9530 grade differ from general-purpose grades? GT9530 is a coated cermet grade designed for wear resistance and surface integrity in finishing; it prioritises a fine finish and extended edge life rather than heavy material removal. What clamping features should the toolholder provide? A holder that matches the rhombic 55° form, plate thickness and the cylindrical hole with countersink will ensure precise seating and repeatable clamping for secure, vibration-free machining. Can the insert be used for internal turning as well as external turning? Yes. The insert is suitable for both external and internal turning when the tool setup provides the necessary rigidity and correct chipbreaker/grade selection for the operation. What does the 7° relief angle mean for cutting? A 7° relief angle reduces rubbing behind the cutting edge, aiding surface finish and decreasing friction in finishing cuts when combined with the GT9530 coating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant coated cermet, precise 55° rhombic geometry and a 0.8 mm corner radius for reliable finishing and light general turning. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. DCMT 11T308 11T308 GT9530 — Turning insert by Tungaloy for finishing with coated cermet A DCMT11T308 GT9530 ISO turning insert designed for finishing and light universal turning in steel, offering a wear-resistant GT9530 grade and ISO rhombic form for consistent surface quality. ISO rhombic DCMT shape 55° for versatile turning Coated cermet GT9530 for extended tool life Designed for finishing and light general turning Cylindrical hole with one-sided countersink Improved surface finish with extended service life The coated cermet composition of the GT9530 grade combines hard ceramic particles with a metal binder to deliver a balance between wear resistance and edge toughness. This makes the insert particularly suited to finishing passes and light general turning where a consistent surface finish and longer intervals between indexings are required. The GT9530 finish-oriented grade reduces built-up edge formation on steel, helping to maintain dimensional stability and reduce rework. In practice, this means fewer interruptions and steadier process outcomes when machining stable components. Simple compatibility and secure clamping for quick tool changes The insert follows ISO geometry, so compatibility with external holders and boring bars depends on the insert form, relief angle, tolerance class, mounting style, size and thickness. The 55° rhombic shape and 7° relief angle support versatile mounting options, while the cylindrical hole with a single-sided countersink (40°–60°) ensures repeatable seating in most ISO clamping systems. The plate thickness of 3.97 mm and the 0.8 mm corner radius contribute to stable clamping and predictable cutting forces, enabling fast changeovers with the appropriate shim or clamping set and replacement screws. Practical application guidance for reliable machining Suitable for both external and internal turning, the insert performs best under stable cutting conditions where finishing and light turning are required. Select a matching chipbreaker and grade according to workpiece material and machine rigidity; the single-sided chipbreaker on this insert supports controlled chip formation in continuous cuts. The 0.8 mm corner radius offers a compromise between edge strength and fine surface quality—larger radii increase robustness, smaller radii improve finish—so choose the radius in line with part tolerance and feed rate. For repeatable outcomes, pair the insert with a correctly sized external holder and maintain consistent machining parameters. For application advice or to request compatible holders and clamping kits for Tungaloy inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants provide technical guidance for optimal process results. Technical Data Article number: 6998339 SKU: 6998339-Tungaloy Manufacturer SKU: TUN6998339 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Grade/coating: GT9530 Facts Corner radius: 0.8 mm Insert size: 11 Geometry code: 11T308 Relief angle: 7° Main angle: 55° Thickness: 3.97 mm Special features ISO rhombic insert Coated cermet grade GT9530 Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Application: turning (external and internal) System: insert + holder or boring bar + shim/clamping set and replacement screws FAQ What materials is this insert intended for? The GT9530-coated cermet grade is intended primarily for machining steel; the DCMT11T308 insert from Tungaloy is optimised for finishing and light general turning in stable conditions. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength compared with smaller radii while still supporting a good surface finish; the DCMT11T308 balances robustness and finishing ability. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, mounting style, size and thickness; the ISO rhombic geometry and cylindrical hole with countersink allow use with standard external holders and boring bars designed for DCMT inserts. Is the GT9530 suitable for interrupted cuts? GT9530 is a finish-to-light universal grade designed for stable conditions; for heavy interrupted cuts, a tougher grade is recommended instead of GT9530. What system components are recommended when fitting the insert? Use a matching external holder or boring bar, appropriate underlay/shim and the specified replacement screws to ensure repeatable clamping and correct seat geometry for the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 GT9530 Wendeplatten - Tungaloy
Combining the GT9530 coated cermet for wear resistance with the ISO rhombic DCMT geometry and a 0.8 mm corner radius delivers consistently improved surface quality and extended tool life in stable turning operations; order via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. DCMT 11T308 GT9530 Turning insert, coated cermet, 0.8 mm corner radius (Tungaloy) A DCMT11T308 GT9530 turning insert engineered for finishing and light universal turning of steel where a fine surface finish and prolonged tool life are priorities Coated cermet grade GT9530 for wear resistance ISO rhombic DCMT geometry for precise seating 0.8 mm corner radius for fine surface finish Cylindrical hole with one-sided countersink Consistent surface quality and extended tool life The GT9530 coated cermet grade is designed for wear-resistant finishing to light universal turning of steel, providing a balance between surface integrity and tool longevity. Cermet compositions combine ceramic hardness with metal toughness, which reduces flank wear and helps achieve an excellent surface finish at the end of the cycle. Under stable machining conditions this results in fewer insert changes and reduced part rework, improving productivity and lowering overall machining costs. Secure clamping and ISO compatibility for reliable machining Constructed to the ISO specification for rhombic turning inserts, the geometry ensures repeatable positioning and reliable clamping in standard holders. The cylindrical hole with a one-sided countersink (40°–60°) simplifies seating and torque transmission while the defined tolerance classes support consistent repeatability. Compatibility with a chosen holder depends on form, clearance angle, tolerance class, attachment method, size and plate thickness, so correct matching guarantees secure mounting and predictable cutting performance. Application-tailored chip control and process stability This insert features a single-sided chipbreaker suitable for finishing and light general-purpose operations; selecting the correct chipbreaker and grade according to material, cutting mode and machine rigidity optimises chip evacuation and surface integrity. The modest 0.8 mm corner radius supports fine edge engagement for delicate finishing passes, while the 7° clearance reduces rubbing and thermal build-up. For less rigid setups or heavy interrupted cuts, consider alternative grades or toolholding strategies to maintain stability. Simple selection and integration into existing tooling systems As an ISO-format turning insert from the ISO-Drehwendeschneidplatten series, the component integrates easily into existing tool systems provided the holder matches the DCMT profile and the specified dimensions. The 3.97 mm plate thickness and 11 mm size are standard data points for replacement planning and inventory control. When planning setups, factor in the insert grade and chipbreaker versus the workpiece material to achieve the intended balance of surface quality and tool life. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts like the DCMT11T308 GT9530, including holder compatibility and application recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998333 SKU: 6998333-Tungaloy Manufacturer: Tungaloy Model series: ISO turning inserts Manufacturer SKU: TUN6998333 Facts Corner radius: 0.8 mm Included angle: 55° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 11 mm Special features Grade: GT9530 Cutting material: coated cermet Plate shape: rhombic Chipbreaker: single-sided Hole style: cylindrical hole with one-sided countersink (40°–60°) Application: turning Compatibility: ISO holder fit depends on form, clearance, tolerance, attachment, size and thickness FAQ What materials is this insert intended for? The DCMT11T308 GT9530 is optimised for machining steel, offering wear resistance and a quality finish in finishing to light universal turning applications. Is the GT9530 grade suitable for finishing operations? Yes, the GT9530 coated cermet grade is engineered for wear-resistant finishing and light universal cuts where surface quality and longer tool life are required. How does the insert attach to the holder? Attachment follows ISO rhombic DCMT conventions; the combination of form, clearance angle, tolerance class, hole and plate thickness determines secure seating and compatibility with the chosen holder. What is the purpose of the one-sided chipbreaker? The single-sided chipbreaker aids controlled chip formation and evacuation during finishing passes, improving surface integrity and reducing the risk of chip entanglement for stable turning conditions. Can this insert be used for heavy interrupted cuts? This insert is aimed at finishing to light general-purpose turning under stable conditions; for heavy interrupted cuts, a more robust grade or specific chipbreaker and reinforced toolholding are recommended to maintain stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cutting edge, the NS9530 uncoated cermet grade and the compact 55° rhombic geometry for low cutting forces and consistently high surface quality; order the DCMT11T308 NS9530 insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T308 NS9530 Tungaloy turning insert — ISO DCMT, 55° rhombic, 0.8 mm radius The DCMT11T308 NS9530 is an ISO‑standard rhombic turning insert engineered for fine finishing in Stahl turning, optimised for continuous cuts and small depths of cut. ISO‑standard DCMT shape, 55° geometry NS9530 uncoated cermet for fine finishing Sharp cutting edge for low cutting forces 0.8 mm nose radius for superior surface finish Consistent surface quality and cutting performance The NS9530 grade is an uncoated cermet developed for finishing applications in Stahl, offering a sharp cutting edge that reduces cutting forces and improves surface integrity on continuous cuts. The combination of low friction and edge stability means the insert delivers repeatable part finish and dimensional consistency, especially at small depths of cut. The modest nose radius and precise edge preparation lower the risk of built‑up edge and support a stable machining window for finishing passes. Reliable geometry and holder compatibility for predictable results The insert follows an ISO‑standard DCMT form with a 55° rhombic geometry and a 7° relief angle, ensuring compatibility with a wide range of turning holders designed for DCMT‑type inserts. The part includes a cylindrical hole with single‑side countersink (40°–60°) and a plate thickness of 3.97 mm, which together determine clamping behaviour and torque requirements. Matching holder form, tolerance class, fastening and size guarantees correct seating and repeatable cutting conditions, reducing setup time and scrap. Practical machining guidelines and shop benefits For best results, select a chipbreaker and feed that suit finishing cuts and the continuous‑cut characteristic of this grade; the single‑sided chipbreaker supports controlled chip flow on smaller depths of cut. The insert is supplied in the DCMT11T308 ISO designation, with a 0.8 mm corner radius that favours improved surface finish while maintaining edge strength. As an uncoated cermet, it performs particularly well in finishing applications where thermal stability and cutting edge sharpness take priority. Choosing this insert contributes to shorter cycle times and fewer reworks when paired with appropriate machining parameters and a stable setup. Contact Metav Werkzeuge for tailored application advice or to order Tungaloy DCMT11T308 NS9530 inserts (SKU: TUN6998475) directly from stock Technical data Article number: 6998475 SKU: 6998475-Tungaloy Manufacturer SKU: TUN6998475 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: 11T308 Geometry: 55° rhombic Relief angle: 7° Corner radius: 0.8 mm Thickness: 3.97 mm Size: 11 Special features Grade: NS9530 (uncoated cermet) Chipbreaker: single‑sided Hole style: cylindrical hole + single‑side countersink (40°–60°) Application: Turning Compatibility: ISO‑standard DCMT insert holders FAQ What materials is this insert suited for? The DCMT11T308 NS9530 insert is intended primarily for finishing in Stahl; the NS9530 uncoated cermet grade is optimised for low cutting forces and high surface quality on continuous cuts. How does the 0.8 mm radius affect the surface finish? A 0.8 mm corner radius balances edge strength and finish quality—this radius helps the NS9530 grade produce superior surface integrity while maintaining stable cutting behaviour during finishing passes. Which holders are compatible with this DCMT insert? Compatibility depends on holder form, relief angle, tolerance class, fastening and plate thickness; the DCMT11T308 follows ISO standards and fits holders designed for DCMT inserts with a 55° rhombic geometry and 7° relief angle. Is the insert coated? The NS9530 grade is an uncoated cermet, specified for finishing applications where a sharp cutting edge and low cutting forces are required. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of fine finishing performance, low cutting forces, and ISO-standard compatibility for reliable turning processes; order the insert directly via Metav Werkzeuge or ask our consultants for guidance. DCMT 11T308 NS9530 Tungaloy indexable turning insert — fine finishing, low cutting forces DCMT 11T308 NS9530 is an ISO-standard rhombic indexable insert designed for finishing turning operations on steel, offering a sharp cutting edge and stable chip control. Fine finishing grade NS9530 Sharp cutting edge, low cutting forces ISO rhombic form, 11 mm size Cylindrical hole with single-sided countersink Achieve consistently superior surface finish with low cutting resistance The NS9530 grade is an uncoated cermet developed for fine finishing on steel, providing a sharp edge that reduces friction and generates minimal built-up edge. This results in a consistent surface quality and reliable dimensional accuracy in continuous feed conditions. Reduced cutting resistance means lower tool-induced vibration and improved process stability, which contributes to longer uninterrupted cutting times and fewer part reworks. The combination of a refined cutting edge and the single-sided chipbreaker supports predictable chip formation during small depths of cut, making the insert particularly suitable for finishing passes where surface integrity is critical. ISO compatibility and clamping: straightforward integration into existing toolholders The rhombic geometry and ISO coding ensure clear compatibility with standard turning holders; form, relief angle, tolerance class, attachment, size and thickness determine proper fit. The insert features a 7° relief angle and a 55° wedge angle, with an 11 mm plate size and 3.97 mm thickness, allowing straightforward replacement in ISO seats designed for DCMT-style geometry. The cylindrical hole with a single-sided countersink (40°–60°) offers secure clamping and repeatable positioning. Specifying holders and clamping kits that match these parameters guarantees optimal seat contact and axial support, which in turn preserves the sharp edge and prevents fretting or movement under finish-cut conditions. Practical advantages for production: stability, predictability and efficient finishing Choosing this grade and geometry lowers the risk of chatter and enables tighter tolerances on turned parts thanks to the insert’s sharp edge and stable chip control. For operations requiring predictable outcomes—such as batch finishing of shafts—the insert supports repeatable surface results and reduced secondary operations. The design encourages efficient cycle times for finishing passes without sacrificing surface quality. For process planning, pairing the insert with a suitable holder and steady cutting parameters yields an economical balance between tool life and part quality. If selection between grades or chipbreakers is uncertain, Metav Werkzeuge’s technical team can advise on matching the insert to the workpiece material and machining strategy. Contact Metav Werkzeuge for technical advice or to arrange a sample pack tailored to finishing applications; Metav Werkzeuge can provide immediate assistance and specification support. Technical data Article number: 6789580 Manufacturer SKU: TUN6789580 SKU: 6789580-Tungaloy Model series: ISO turning indexable inserts Name: DCMT11T308 NS9530 Tungaloy indexable insert Facts Plate size: 11 mm Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Wedge angle: 55° Hole: with hole Special features Uncoated cermet grade NS9530 Rhombic plate form (DCMT) One-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) Application: turning, finishing on steel Compatibility determined by form, relief angle, tolerance class, attachment, size and thickness FAQ What materials is this insert best suited for? The DCMT 11T308 NS9530 Tungaloy indexable insert is optimised for finishing on steel and delivers high surface quality under continuous cutting conditions. How is the insert secured in the toolholder? Clamping uses the central cylindrical hole with a single-sided countersink (40°–60°); the DCMT geometry fits ISO-standard holders that match the stated form, relief angle and thickness. What chip control can be expected with this grade? The one-sided chipbreaker combined with the NS9530 cermet grade promotes stable chip formation and predictable evacuation during finishing cuts. Is this insert suitable for interrupted cuts? The grade is primarily a finishing grade for continuous cuts and small depths of cut; for heavily interrupted machining a different chipbreaker or grade may be preferable. Which parameters influence compatibility with existing holders? Compatibility depends on form, relief angle, tolerance class, attachment method, plate size and thickness as noted; ensure holders are specified for DCMT-style inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and ISO compatibility for consistent production results; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DCMT11T308 11T308 NS9530 turning insert by Tungaloy — rhombic 55° finishing geometry DCMT11T308 NS9530 is an ISO rhombic turning insert designed for external and internal finishing operations on steel, offering a sharp cutting edge and a cermet composition optimised for continuous cuts. ISO rhombic insert DCMT11T308, 55° angle Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces 0.8 mm corner radius; one-sided chipbreaker Achieve superior surface quality with a finishing-grade insert The NS9530 grade is an uncoated cermet developed for finishing applications on steel, delivering a high surface finish with reduced cutting forces. Its sharp cutting edge helps to minimise burr formation and ensures stable tool behaviour during continuous cutting and small depths of cut. For process planners, this means fewer rework cycles and a predictable part finish when the geometry and cutting data are correctly matched to the workpiece. Secure clamping and ISO compatibility reduce setup risk The rhombic 55° geometry provides reliable engagement in common ISO holders while the insert’s form, 7° clearance, tolerance class, fixation and thickness determine compatibility with a given toolholder. The moderate 3.97 mm thickness and standard size make the insert straightforward to seat and clamp, helping to maintain repeatable tool offsets and consistent part accuracy across batches. Clear specification of holder type and mounting hardware avoids misfits and production delays. Improved chip control and lower cutting forces for stable turning A one-sided chipbreaker combined with a 0.8 mm corner radius promotes predictable chip formation during finishing passes and supports continuous chip evacuation in stable cut conditions. The tool’s geometry lowers instantaneous cutting forces, which reduces spindle and fixture loads and contributes to a steadier machining process. In practice, this translates into better surface integrity and prolonged tool life when operated within recommended cutting parameters. System thinking for reliable process integration As part of an ISO insert system, the insert must be used with a compatible external holder or boring bar, appropriate shim or clamp set and correct fastening screws. The carbide substrate offers the rigidity required for fine finishing, while the insert’s single-sided chipbreaker and hole with a cylindrical bore plus one-sided countersink (40°–60°) enable secure fastening. Selecting the correct grade and chipbreaker orientation for the machining strategy ensures economical, repeatable performance in small-depth finishing operations. For tailored application recommendations or to request sample inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists can advise on cutter selection, holders and cutting data for Tungaloy NS9530 finishing inserts Technical data Article number: 6998488 Manufacturer SKU: TUN6998488 SKU: 6998488-Tungaloy Designation: DCMT11T308 NS9530 Model series: ISO turning inserts Material: carbide Specifications Insert size: 11 Cutting edge angle: 55° Clearance angle: 7° Corner radius: 0.8 mm Plate thickness: 3.97 mm Features Rhombic plate form With hole: cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker Uncoated cermet grade NS9530 Application: turning (external and internal) FAQ What materials is this insert suitable for? The DCMT11T308 NS9530 turning insert is intended primarily for finishing operations on steel and is optimised for continuous cuts with small depths of cut. How does the NS9530 grade affect surface finish? The NS9530 uncoated cermet provides a sharp cutting edge and low cutting forces, which together produce improved surface integrity and reduced need for secondary finishing. Which holders are compatible with this insert geometry? Compatibility depends on holder form, clearance angle, tolerance class, fixation, size and thickness; the insert is ISO‑standard and fits standard rhombic 55° external holders when matched correctly. What is the purpose of the one-sided chipbreaker? The one-sided chipbreaker promotes controlled chip formation in finishing passes, aiding continuous chip flow and helping to maintain a stable cutting process. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning applications when used in an appropriate boring bar or internal holder designed for ISO rhombic inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, sharp cermet cutting edge and low cutting forces for consistent surface quality and predictable tool life; order the DCMT11T308 NS9530 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT DCMT11T308 NS9530 indexable turning insert for turning — Tungaloy A DCMT11T308 NS9530 indexable insert engineered for finishing turning operations on steel, offering a sharp uncoated cermet grade for low cutting forces and high surface quality Finishing cermet grade NS9530 with sharp edge Low cutting forces for continuous cuts ISO‑compliant DCMT11T308 geometry Cylindrical hole, one‑side countersink 40°–60° Consistent finishing and superior surface quality The geometry and material selection focus on delivering reliable finishing results on steel components. The combination of a sharp uncoated cermet grade and the rhombic insert form produces low cutting forces and reduced vibration, which directly translates into a finer surface finish and fewer rework cycles. The insert’s design supports continuous cuts and small depths of cut, making it especially suitable where surface integrity and dimensional consistency are priorities. Predictable process control and efficiency Designed to reduce machining variability, this insert supports stable chip formation and repeatable results under consistent conditions. The one‑sided chipbreaker is tuned for finishing and helps maintain a uniform chip flow, while the low force requirement lowers tool‑holder stress. Together, these characteristics improve cycle time reliability and can contribute to overall process efficiency and cost control in production environments. Clear compatibility with standard holders and clamping systems Compatibility with toolholders is determined by form, relief angle, tolerance class, clamping, size and thickness. The ISO DCMT geometry ensures wide availability of matching external holders and boring bars; ensure the holder matches the 7° relief and the insert thickness. The cylindrical hole with a single‑side countersink (40°–60°) requires the corresponding screw and seat for secure clamping and precise repeatability in multi‑station setups. What the material and grade mean in practice The NS9530 grade is an uncoated cermet, optimised for finishing steel with a focus on a sharp cutting edge and low built‑up edge tendency. Cermet combines ceramic hardness with metal toughness to maintain edge integrity at finishing feeds and speeds; in practice this means improved surface finish without the need for aggressive machining parameters. The absence of a coating reduces sensitivity to thermal cycling during fine finishing passes. Recommended applications and processing approach Intended primarily for external and internal finishing, the insert is best applied where continuous cuts and modest depths of cut are used. Select the chipbreaker and grade according to the workpiece material and the machine‑tool stability: the NS9530 grade excels in steady conditions on steel. For interrupted cuts or unstable setups, consider alternative chip management strategies or different grades to preserve edge life. Availability, handling and technical support Supplied as an ISO‑norm insert ready for standard indexable systems, the DCMT11T308 format facilitates fast replacement and minimal setup time. For queries about holder matching, clamping screws or application‑specific recommendations, Metav Werkzeuge provides technical support and can advise on optimised insert selection to extend tool life and enhance process security. For precision finishing on steel, request supply of the Tungaloy DCMT11T308 NS9530 indexable insert through Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for machining advice and ordering guidance Technical Data Article number: 6997720 SKU: 6997720-Tungaloy Manufacturer SKU: TUN6997720 Series: ISO‑Drehwendeschneidplatten ISO designation: DCMT11T308 Facts Corner radius: 0.8 mm Insert size: 11 mm Thickness: 3.97 mm Relief angle: 7° Form angle: 55° Hole: with hole Countersink: 40°–60° Special features Uncoated cermet grade NS9530 Finishing grade for steel One‑sided chipbreaker Rhombic insert shape (DCMT) Cylindrical hole with single‑side countersink ISO‑compliant indexable insert geometry Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness Manufacturer: Tungaloy FAQ What materials is this insert suited for? The DCMT11T308 NS9530 Tungaloy insert is optimised for finishing operations on steel, delivering low cutting forces and excellent surface finish on continuous cuts. Is the insert coated? No — the NS9530 is an uncoated cermet grade; the lack of coating supports a very sharp edge suited to finishing and helps avoid coating‑related adhesion at low depths of cut. Which holders fit this insert? Compatibility requires a holder matching the DCMT11T308 geometry, the 7° relief and the insert thickness; ensure the toolholder clamp suits the cylindrical hole and countersink specification. What cutting style and conditions are recommended? Best results are achieved with continuous cutting and small depths of cut; the insert is a finishing grade and performs best under steady machining with appropriate chip evacuation. How does the chipbreaker affect machining? The one‑sided chipbreaker is designed for finishing, promoting stable chip formation and consistent surface quality when matched with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 NS9530 Wendeplatten - Tungaloy
Product data inconsistency: the tool material is given as "Hartmetall" (cemented carbide), while the cutting material is specified as "uncoated cermet". This discrepancy creates confusion and makes it challenging to determine the correct specifications for the product, as the tool material and cutting material should align to ensure accurate classification and description. Without clarification, it is impossible to produce a reliable product description or provide customers with the necessary information to make informed decisions. It is essential to resolve this issue promptly by verifying the correct materials and updating the data to reflect consistent and accurate information across all relevant documentation.
DCMT 11T308 NS9530 Wendeplatten - Tungaloy
Take advantage of a precision finishing insert that combines a low cutting-force geometry with a very sharp cutting edge for superior surface quality; ideal for continuous turning operations in steel. Order directly via Metav Werkzeuge or consult our specialists for application-specific selection and stock availability. DCMT 11T308 NS9530 – Indexable Turning Insert for Turning, Tungaloy The DCMT 11T308 NS9530 insert offers a finishing geometry for steel turning with a sharp edge and ISO compatibility. ISO rhombic insert, DCMT geometry Uncoated cermet NS9530 finishing grade Sharp cutting edge for superior surface finish Compatible with ISO turning holders Precision finishing for demanding steel turning The NS9530 grade is an uncoated cermet developed for finishing operations in steel, delivering a sharp cutting edge and low cutting forces that reduce tool marks and improve productivity. This behaviour supports continuous cuts and small depths of cut, making the insert especially suitable where consistent surface finish is required. The combination of a fine edge and a cermet substrate ensures stable performance on long runs and contributes to reduced rework rates, which is a clear operational advantage in batch and serial production. Stable cutting geometry for consistent results A well-defined geometry with a 0.8 mm corner radius and an optimised chipformer produces predictable chip flow and helps maintain dimensional accuracy during finishing passes. The single-sided chipbreaker is tuned for light cuts, so burr formation and vibration are minimised while the insert sustains a consistent edge line. In practice, this leads to fewer interruptions, a lower scrap rate and improved process reliability when finishing shafts, shoulders or external profiles on steel components. Secure clamping and ISO compatibility for easy integration Built to the ISO standard, the rhombic shape and the cylindrical hole with one-sided countersink (40°–60°) ensure secure seating in common indexable holders and boring bars. With a nominal size of 11 mm, 3.97 mm thickness and standard tolerances, the insert can be integrated into existing tool systems without modification, simplifying tool inventory and changeover logistics. The consistent mechanical fit supports repeatable clamping and reduces set-up time on multi-machine shops. Practical selection tips and application guidance Select this finishing grade when the priority is minimal cutting force and excellent surface appearance rather than heavy material removal. The cemented carbide substrate offers wear resistance appropriate for fine finishing of medium-strength steels under continuous cutting conditions. For best results, pair the insert with a rigid holder, modest feed rates and shallow depths of cut; the combination optimises tool life and delivers the intended high surface quality while maintaining process stability. For precision finishing tasks with Tungaloy inserts, contact Metav Werkzeuge for tailored advice and availability — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6998482-Tungaloy Manufacturer article number: 6998482 Manufacturer SKU: TUN6998482 Model series: ISO turning indexable inserts Label: DCMT11T308 NS9530 Tungaloy insert Facts Size: 11 mm Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Cutting angle: 55° Special features Shape: rhombic Material: cemented carbide Grade: NS9530 (uncoated cermet finishing grade) Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Application: Turning; finishing in steel; continuous cuts; small depths of cut Compatibility: ISO‑standard insert for matching holders FAQ Is this insert suitable for finishing steel components? Yes. The DCMT11T308 NS9530 is a finishing-grade uncoated cermet insert designed specifically for finishing operations in steel, delivering low cutting forces and improved surface quality. Which holder types are compatible with this geometry? Compatibility is ensured by the ISO rhombic form and the cylindrical hole with countersink; the insert fits standard indexable turning holders and suitable boring bars when the holder matches the DCMT profile and size. What are the key dimensions to check when replacing an insert? Verify the insert size (11 mm), thickness (3.97 mm), corner radius (0.8 mm) and the hole/countersink specification to ensure secure clamping and correct seating in the chosen holder. How does the NS9530 grade perform on continuous versus interrupted cuts? The NS9530 finishing grade is optimised for continuous cuts and small depths of cut, providing excellent edge sharpness and surface finish; interrupted heavy cuts are not the primary intended use for this grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance from the NS9530 uncoated cermet grade, a sharp cutting edge and a 0.8 mm nose radius to achieve consistently superior surface quality; order the insert directly via Metav Werkzeuge or consult our application specialists for tailored advice. DCMT11T308 NS9530 turning insert (uncoated cermet, 0.8 mm radius) — Tungaloy A DCMT11T308 NS9530 indexable turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for smooth continuous cuts. ISO‑standard rhomboidal insert NS9530 uncoated cermet finishing grade Sharp edge for superior surface finish Compatible with holders requiring 7° relief Reduced secondary operations through high-quality finishing The uncoated NS9530 cermet is formulated as a finishing grade for steel, delivering low cutting forces and a high surface finish that often reduces the need for downstream grinding or polishing. Cermet substrates combine ceramic hardness with metallic toughness to keep the cutting edge sharp under continuous, light-depth passes; this makes the insert especially suitable where consistent surface quality is a production priority rather than heavy material removal. Geometry tuned for stable clamping and repeatable results Built to the ISO specification, the rhomboidal form provides predictable orientation and clamping across compatible toolholders. Key geometry values such as the 55° lead angle and 7° relief angle are matched to common external holders, while the 0.8 mm nose radius and 3.97 mm plate thickness support fine-profile turning. The central hole with a cylindrical bore and a single‑sided countersink (40°–60°) ensures secure fixation and straightforward replacement during batch production, maintaining repeatability across shifts. Practical guidance for efficient process integration The single‑sided chipbreaker and finishing nature of this insert favour continuous cuts and small depths of cut, so choose a matching holder and machining parameters for stable cutting conditions. Use the grade for steels where a fine workpiece finish is required; the combination of edge geometry and cermet composition yields excellent results in steady, low‑vibration setups. Selecting the correct chipbreaker and clamping class helps to exploit the insert’s low cutting forces while protecting the sharp edge and maximising tool life. For personalised application recommendations or to order the Tungaloy DCMT11T308 NS9530 insert, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Technical data Article number: 6789587 SKU: 6789587-Tungaloy Manufacturer SKU: TUN6789587 Brand: Tungaloy Model series: ISO turning indexable inserts Designation: DCMT11T308 Grade: NS9530 Core dimensions Size: 11 Thickness: 3.97 mm Nose radius: 0.8 mm Lead angle: 55° Relief angle: 7° Features & applications Shape: rhomboidal Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Grade/type: uncoated cermet NS9530 Material note: Hartmetall (as provided) Intended use: turning; finishing for steel FAQ What materials is this insert intended for? The DCMT11T308 NS9530 Tungaloy insert is specified as a finishing grade for steel and is optimised for continuous, light-depth turning operations. How does the NS9530 grade affect surface quality? NS9530 is an uncoated cermet grade offering a sharp cutting edge and low cutting forces, which together produce a high surface finish in finishing applications with stable machining parameters. Which toolholders are compatible with this ISO insert? Compatibility is determined by insert form, relief angle, tolerance class, attachment and thickness; the DCMT11T308 designation and 7° relief make it compatible with holders designed for DCMT‑type inserts. What does the central hole and countersink mean for clamping? The insert’s cylindrical hole with a single‑sided countersink (40°–60°) enables secure mechanical clamping and straightforward indexing or replacement during production. Is this insert suitable for interrupted cuts or heavy roughing? This finishing insert is optimised for continuous cuts and small depths of cut; for interrupted cuts or heavy material removal a more robust grade or geometry should be selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T505 Wendeplatten - Tungaloy
High machining economy and reliable chip control are delivered by the CVD-coated carbide T505 grade combined with the ISO rhombic geometry; the 0.8 mm corner radius and one-sided chipbreaker provide stable cutting in interrupted turns. Order or request advice through Metav Werkzeuge to confirm holder compatibility and ensure seamless tool integration. DCMT 11T308 T505 turning insert (ISO) — Tungaloy The DCMT 11T308 T505 is an ISO-standard rhombic indexable turning insert designed for economical external and internal turning, optimised for cast iron applications. DCMT11T308 T505 by Tungaloy CVD-coated carbide for cast iron machining Rhombic insert with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Consistent chip control and longer tool life for cast iron The combination of CVD-coated surface technology and the T505 grade gives the insert reliable wear resistance and predictable performance when machining cast iron. The one-sided chipbreaker directs chips away from the cutting zone, reducing vibration and lowering the risk of built-up edge. These properties translate into fewer interruptions, longer tool life and more consistent surface finish, especially under varying feed rates and interrupted cuts. The result is reduced downtime and a more economical turning process. ISO conformity and straightforward tool matching Specified as an ISO rhombic insert, the designation supports straightforward replacement and stock management. The DCMT11T308 geometry follows ISO norms so compatibility with external holders and boring bars is determined by form, relief angle, tolerance class, fixing method, size and thickness. This conformity simplifies procurement and reduces the need for custom setups. When matched with the correct clamp set and screws, the system composition ensures secure clamping and repeatable positioning for stable production runs. Geometry engineered for stability and surface quality Key geometry features—0.8 mm corner radius, 7° relief and a 55° lead angle—balance edge strength and surface finish. A larger corner radius increases edge robustness and helps to smooth tool marks, while the relief angle prevents rubbing on the flank face during engagement. The insert thickness of 3.97 mm and the inscribed size of 11 mm give mechanical support in the pocket, improving resistance to bending and shock. These parameters make the insert well suited to interrupted turning and operations requiring reliable dimensional control. Practical selection and application guidance Select the chipbreaker and grade according to workpiece stability, type of cut and desired cutting speed: the T505 grade is optimised for economical machining of cast iron and performs best where stable clamping and appropriate cutting data are provided. The rhombic form with a central hole and a 40°–60° countersink ensures secure fastening and simple indexability. For tailored cutting data or holder recommendations, technical consultation is available to match the insert to machine rigidity and process requirements. Contact Metav Werkzeuge for application support or to secure supply of Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6793674 Manufacturer SKU: TUN6793674 Brand: Tungaloy Model series: ISO turning inserts Designation: DCMT11T308 Material: carbide Coating/grade: T505 (CVD) Application: Turning Facts Size: 11 mm Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Lead/approach angle: 55° Countersink angle: 40°–60° Hole: cylindrical Special features Rhombic insert shape One-sided chipbreaker Cylindrical hole with one-side countersink Suitable for cast iron machining ISO-compatible geometry System: insert + external holder or boring bar + support/clamp set + replacement screws FAQ What materials is this insert designed for? The DCMT11T308 T505 turning insert is formulated for economical machining of cast iron and performs reliably where chip control and edge stability are required. How does the T505 grade affect tool life? The T505 CVD-coated carbide grade improves wear resistance and maintains a stable cutting edge, extending service life under typical cast iron turning conditions. Is the DCMT11T308 compatible with standard ISO holders? Yes, the ISO designation indicates compatibility with standard external holders and boring bars provided the holder matches form, relief angle, tolerance and size. What is the purpose of the one-sided chipbreaker? The one-sided chipbreaker on this insert promotes controlled chip formation and evacuation, lowering vibration and improving surface finish during turning operations. Which geometric values should be considered for setup? Important values include the 0.8 mm corner radius, 7° relief, 55° lead angle and the insert thickness of 3.97 mm; these determine edge strength, contact conditions and suitability for interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com