DCMT 11T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide T9225, precise ISO geometry and a compact 0.4 mm nose radius for stable machining and predictable tool life; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. DCMT 11T304 T9225 indexable insert for turning — Tungaloy A DCMT11T304 indexable turning insert designed for medium to heavy steel machining, offering a CVD-coated carbide grade for reliable edge life and versatile chip control CVD-coated carbide T9225 for robustness ISO-compatible rhombic geometry, 55° approach angle 0.4 mm corner radius for accurate profiles Cylindrical hole with one-sided countersink 40°–60° Stable cutting performance under varied conditions The CVD-coated carbide composition of this insert offers a balance of hardness and toughness that suits interrupted cuts and fluctuating engagement conditions. The T9225 grade is configured as a robust universal option for steel turning, enabling consistent cutting forces and prolonged edge life compared with uncoated grades. For production environments where reproducible results and reduced tool changes matter, this combination leads to lower process variability and improved throughput. Geometry that supports precision and surface quality With a rhombic form and an approach angle of 55°, the insert produces predictable chip flow and load distribution across the cutting edge. The specified 7° clearance and a 0.4 mm corner radius contribute to accurate dimensional control and help achieve the desired surface finish on turned components. The compact nose radius is especially useful when machining detail features or maintaining tight tolerances on shafts and bores, while the plate thickness of 3.97 mm ensures mechanical stability during heavier cuts. System compatibility and straightforward mounting The insert conforms to ISO indexable insert standards; compatibility with a toolholder is determined by form, clearance, tolerance class, fastening method, size and thickness. The component is supplied with a cylindrical hole and one-sided countersink (40°–60°), making it suitable for common screw-clamped holders and certain bore-type fixing systems. When assembling the cutting system, pair the insert with an appropriate ISO external holder or boring bar and the correct clamp/washer set to secure repeatable positional accuracy. Chip control and application-specific advantages Equipped with a one-sided chipbreaker, the insert channels chips efficiently during longitudinal and facing operations, reducing the risk of entanglement and supporting safer automated handling. The grade selection—T9225—is optimised for mid-to-heavy steel machining; it combines stable chip formation with good wear resistance, which is beneficial for batch production and mixed-run shops. For best results, match feed and speed to the workpiece material and machine rigidity to exploit the grade’s balance of toughness and wear resistance. Contact Metav Werkzeuge for delivery details, cutting-data recommendations and to discuss whether the Tungaloy DCMT11T304 T9225 indexable insert fits the intended turning application Technical details Article number: 6781041 Manufacturer SKU: TUN6781041 Model series: ISO-Drehwendeschneidplatten Designation: DCMT11T304 T9225 Tungaloy-Wendeplatte Core data Size: 11 Thickness: 3.97 mm Approach angle: 55° Clearance (relief) angle: 7° Corner radius: 0.4 mm Hole: with hole, cylindrical hole + one-sided countersink (40°–60°) Special features Coating: CVD-coated Material: carbide Grade: T9225 Chipbreaker: one-sided Application: turning (external and internal) Shape: rhombic Typical system: ISO insert + matching external holder or boring bar FAQ What materials is this insert suited for? The DCMT11T304 T9225 indexable insert (Tungaloy, SKU TUN6781041) is primarily designed for medium to heavy steel machining and performs well under interrupted cuts and varying engagement. How does the CVD coating benefit machining? A CVD-coated surface on this insert improves wear resistance and thermal stability, so the Tungaloy DCMT11T304 T9225 maintains cutting performance for longer on demanding turning operations. Which toolholders are compatible with this insert? Compatibility is based on ISO form, clearance angle, tolerance class, fastening and size; the DCMT11T304 fits standard ISO rhombic holders and screw-clamp systems that accept inserts with a cylindrical hole and one-sided countersink. Is the corner radius suitable for finishing work? The 0.4 mm corner radius provides a balance between profile accuracy and edge strength, making the insert suitable for fine profiles and moderate finishing passes on shafts and stepped components. What chip control can be expected with the one-sided chipbreaker? The integrated chipbreaker offers controlled, short chips in typical turning feeds, improving machine safety and chip evacuation during both longitudinal turning and facing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust T9225 CVD-coated carbide, ISO‑standard geometry and secure clamping for reliable medium to heavy turning operations; order genuine inserts via Metav Werkzeuge or consult the team for holder and setup recommendations. DCMT 11T304 T9225 Tungaloy indexable insert – ISO turning insert, 55° rhombic, 0.4 mm radius The DCMT11T304 Tungaloy indexable insert is an ISO‑format turning insert designed for external and internal turning, offering a universal grade for medium to heavy steel machining. CVD‑coated carbide T9225 for robustness and wear resistance ISO DCMT form, 55° rhombic geometry 0.4 mm nose radius for general turning tasks Single‑sided chipbreaker for stable chip control Consistent cutting performance in mixed conditions The CVD‑coated T9225 grade combines wear resistance with sufficient toughness for when cutting conditions vary or the cut is slightly interrupted. This composition delivers stable chip formation and predictable tool life, reducing unplanned tool changes and improving production continuity. The insert’s design supports a broad range of steel workpieces, making it a solid choice where a balance of durability and performance is required. Geometry that supports accuracy and surface finish The rhombic 55° form and a 0.4 mm nose radius provide a compromise between strength and finishing capability, enabling good surface results on external and internal profiles. A 7° relief angle and a plate thickness of 3.97 mm ensure rigidity in the cutting zone, while the cylindrical hole with a one‑sided countersink (40°–60°) guarantees secure seating in compatible clamping systems. These geometric details translate into repeatable cuts and reduced vibration for more consistent tolerances. System compatibility and straightforward mounting As an ISO‑standard indexable plate, compatibility with holders is determined by form, relief angle, tolerance class, fixing method, size and thickness. The typical system comprises an ISO DCMT insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Specifying the correct holder and clamp reduces setup time and minimises the risk of incorrect seating, supporting efficient tool changes and lower machine downtime. Practical benefits for workshop productivity With its single‑sided chipbreaker and universal grade chemistry, the insert is suitable for a wide range of turning tasks, from general roughing to semi‑finishing in steel. The Tungaloy grade offers a robust option where changing engagement conditions occur, delivering fewer insert breakages under intermittent cuts. Choosing ISO‑conforming inserts simplifies stockkeeping and allows rapid replacement across different machines and fixtures, helping to maintain steady throughput. For tailored holder recommendations and original Tungaloy inserts, contact Metav Werkzeuge for ordering and application advice—Metav Werkzeuge can supply matching holders, shims and replacement screws to ensure a reliable setup Technical Data Article number: 6781117 SKU: 6781117-Tungaloy Manufacturer SKU: TUN6781117 Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9225 Core data Size: 11 mm Thickness: 3.97 mm Nose radius: 0.4 mm Relief angle: 7° Included angle: 55° Countersink angle: 40°–60° Features ISO DCMT form (rhombic) CVD‑coated carbide, grade T9225 Single‑sided chipbreaker Cylindrical hole with one‑sided countersink Suitable for external and internal turning System components: holder, shim/clamp set, replacement screws FAQ What workpieces is this insert best suited for? The DCMT11T304 Tungaloy indexable insert in grade T9225 is intended primarily for medium to heavy steel turning where varying engagement conditions or light interruptions require increased toughness. How does the T9225 grade affect tool life? T9225 is a CVD‑coated carbide grade that balances wear resistance and toughness, which helps to extend service life under mixed or interrupted cutting conditions when using the DCMT11T304 insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO DCMT geometry; compatibility depends on matching form, relief angle, tolerance class, fixing method, size and thickness to the holder. Can this insert be used for finishing operations? With a 0.4 mm nose radius and 55° rhombic geometry, the insert supports semi‑finishing and general finishing tasks, though fine finishing may call for smaller nose radii or alternative grades. What mounting features ensure secure clamping? The cylindrical hole with a one‑sided countersink (40°–60°) provides positive seating and stable clamping when used with the correct shim and clamp set in the matching holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T304 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9225 grade for extended wear resistance and the robust universal geometry for reliable medium-to-heavy steel turning; these qualities combine to increase process stability and lower tool-change frequency. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DCMT 11T304 T9225 — CVD-coated carbide turning insert (Tungaloy) The DCMT11T304 T9225 is an ISO-standard, rhombic turning insert designed for turning applications where variable engagement and interrupted cuts demand increased toughness and reliable chip control. CVD-coated carbide for durability Universal grade for medium–heavy steel Rhombic ISO shape, 55° cutting angle 0.4 mm corner radius for secure engagement Consistent performance for medium to heavy steel turning The insert uses a CVD-coated T9225 carbide grade engineered for robust performance in variable cutting conditions. This combination of coating and substrate provides improved wear resistance while retaining toughness where interrupted cuts or fluctuating depths of cut occur. The result is a predictable tool life under common shop-floor variations, reducing unexpected stoppages. For production environments that alternately require roughing and semi-finishing on steel, the geometry and grade deliver a balance between edge strength and abrasion resistance. Secure seating and straightforward holder compatibility As an ISO-standard rhombic insert, the component is compatible with a wide range of external holders and boring bars when the holder matches form, relief, tolerance class, fastening method, size and thickness. The 7° relief and 3.97 mm thickness contribute to stable clamping and reduced insert movement under load; the insert’s with hole design and the specified cylindrical hole with single-side countersink ensure consistent location and fastening. These mechanical particulars simplify integration into existing tool systems and help maintain repeatable setup accuracy. Geometry tuned for intermittent cuts and chip control The single-sided chipbreaker and single-sided relief strategy combine with a 0.4 mm corner radius to provide positive engagement and controlled chip formation during interrupted or heavy-entrance cuts. The 55° cutting angle of the rhombic shape offers a compromise between approach angle and radial support, helping to limit vibration and protect the cutting edge. Choosing a compatible chipbreaker and matching the insert grade to the workpiece will enhance surface finish and reduce the frequency of edge-related failures. Improved process security and productivity at scale Using this insert supports process security through stable chip formation and predictable wear behaviour, which translates into less rework and fewer unscheduled tool changes. The universal nature of the grade covers a broad range of steels, making inventory handling simpler and allowing operators to respond flexibly to changing production requirements. The cumulative effect is higher productivity and more consistent component quality across batch runs and single-part manufacture. Contact Metav Werkzeuge for tailored application advice on the Tungaloy DCMT11T304 T9225 insert and to discuss optimised holders and cutting parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781112 Manufacturer SKU: TUN6781112 SKU: 6781112-Tungaloy Model series: ISO-Drehwendeschneidplatten Description: DCMT11T304 T9225 Tungaloy turning insert Facts Plate form: rhombic Plate size: 11 Plate thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Cutting angle: 55° Hole: with hole Special features Coating: CVD (T9225) Substrate: carbide Chipbreaker: single-sided Hole style: cylindrical hole + one-side countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert intended for? The Tungaloy DCMT11T304 T9225 insert is designed primarily for medium to heavy steel turning where robustness and reliable chip control are required. How does the T9225 coating benefit tool life? The CVD T9225 coating increases wear resistance while maintaining edge toughness, which is especially beneficial for interrupted cuts and changing engagement conditions in turning operations. Which holders are compatible with this insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness; the DCMT11T304 fits standard ISO rhombic external holders that match these parameters. What cutting geometry should be chosen for interrupted cuts? The single-sided chipbreaker combined with the 0.4 mm corner radius and the rhombic 55° angle provides secure engagement and controlled chips for interrupted and semi-heavy turning. Is this insert suitable for both external and internal turning? Yes, the geometry and grade are suitable for both external and internal turning when a matching holder or boring bar is used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, ISO conformity and precise geometry to maintain stable chip formation and predictable tool life; order directly via Metav Werkzeuge or request tailored advice from our consultants. DCMT 11T304 T9225 — Tungaloy ISO indexable turning insert, CVD-coated carbide, 0.4 mm radius The DCMT11T304 T9225 is an ISO-standard indexable turning insert designed for medium to heavy steel turning, offering a balance of toughness and wear resistance for interrupted cuts and varying engagement conditions. DCMT11T304 ISO indexable turning insert CVD-coated carbide grade T9225 for robustness 0.4 mm corner radius for stable cutting Cylindrical hole with 40°–60° single-sided countersink Precision geometry for consistent process stability The rhombic-shaped insert features an ISO-standard form with a 55° main angle and a 0.4 mm corner radius, engineered to deliver consistent engagement and reduced vibration in external and internal turning cycles. With a 3.97 mm thickness and defined 7° clearance angle, the geometry supports repeatable seating and secure clamping, which directly reduces run-out and contributes to predictable tool life. The measured geometry is particularly beneficial in setups where toolholder compatibility is critical; compatibility depends on insert form, clearance, tolerance class, fixation method, size and thickness. Durable grade and coating for demanding steel applications Built from carbide and finished with a CVD-coated carbide layer in grade T9225, the insert combines surface hardness with a core toughness that handles moderate interruptions and fluctuating cutting conditions. This T9225 grade provides robust wear resistance and stable chip formation across a wide steel range, helping to extend edge life and lower overall machining cost per part. For manufacturers seeking steady productivity under mixed engagement, this grade reduces the need for frequent index changes and supports longer production campaigns. Practical features that aid setup and chip control The insert includes a cylindrical hole with a single-sided countersink (40°–60°) to ensure reliable clamp engagement and precise seating in common ISO-compatible holders. The single-sided chipbreaker design assists in directing chips away from the cutting zone, improving surface finish and easing chip evacuation in both external and internal turning. Selecting an appropriate chipbreaker and matching the insert grade to the workpiece material and rigidity of the setup will yield the best results in terms of machining efficiency and component quality. Guidance for selection and application For turning of medium to heavy steel, choose this insert where mixed cutting conditions or short interruptions occur; the combination of T9225 coating and the rhombic form balances toughness and wear protection. When pairing with a toolholder, verify form, clearance angle, tolerance class and fixation method to ensure secure seating. For quieter cutting and longer life, consider toolholder rigidity and optimal cutting parameters; the insert’s geometry supports reduced cutting forces and improved surface integrity when feed and speed are aligned with material and machine capability. For availability, specific grade recommendations and immediate delivery options of Tungaloy turning inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, application-oriented support. Technical data Article number: 6781458 Dealer SKU: 6781458-Tungaloy Manufacturer SKU: TUN6781458 Model series: ISO turning indexable inserts Name: DCMT11T304 T9225 Tungaloy indexable insert Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.4 mm Insert angle: 55° Clearance angle: 7° Special features Material: carbide Coating / grade: CVD-coated, T9225 Shape: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning (external and internal) Compatibility: depends on form, clearance, tolerance, fixation, size and thickness FAQ What holder types are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fixation method, size and thickness; the DCMT11T304 T9225 fits standard ISO holders that accept 55° rhombic inserts with the specified thickness and hole style. Is the grade suitable for interrupted cuts in steel? Yes, the T9225 CVD-coated carbide grade is formulated for robust, universal performance in medium to heavy steel turning and copes well with lightly interrupted cuts. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius offers a compromise between edge strength and surface finish, improving edge robustness under higher loads while maintaining acceptable surface integrity. Can this insert be used for internal turning? The rhombic shape and chip control features make the insert suitable for both external and internal turning, provided the toolholder offers the required clearance and rigidity. What advantage does the countersunk hole provide? The cylindrical hole with a single-sided countersink (40°–60°) secures consistent clamping and helps align the insert in the pocket, reducing the likelihood of movement under load and improving repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide performance and a compact 0.4 mm corner radius make this ISO rhombic insert a dependable choice for medium-to-heavy steel turning; its 55° geometry and standardised dimensions simplify holder compatibility. Order the DCMT11T304 T9225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T304 T9225 Tungaloy — ISO rhombic turning insert for medium-to-heavy steel machining A DCMT11T304 Tungaloy insert designed for ISO-standard external and internal turning, combining universal toughness with straightforward toolholder compatibility. ISO rhombic 55° geometry CVD-coated carbide grade T9225 0.4 mm corner radius for robustness Cylindrical hole + countersink (40°–60°) Reliable geometry and straightforward compatibility for production use The ISO-standard shape and rhombic 55° geometry offer a balance between accessibility and cutting stability, especially where fluctuating engagement occurs. The specified 7° relief angle and standard tolerances determine compatibility with a wide range of external holders and boring bars; this reduces setup time and simplifies inventory management. Integration is achieved through form, size and thickness conformity, ensuring consistent seating and repeatable tool life. Durable grade and coating for heavier steel operations The grade T9225 is a CVD-coated carbide formulated as a robust universal option for medium-to-heavy steel turning. Its composition prioritises toughness to withstand light interruptions and variable chip loads while the coating improves wear resistance and thermal stability. The single-sided chipbreaker manages swarf formation for many turning tasks, and the 0.4 mm corner radius contributes to a resilient cutting edge without excessive load on the tool. The insert’s 3.97 mm thickness and central cylindrical hole + countersink deliver secure clamping and stable performance during demanding cuts. Practical selection advice to maintain process security For predictable results, pair this indexable insert with a matched holder and appropriate clamping set; the hole style and size influence screw choice and seating. Selection of chipbreaker and grade should reflect workpiece rigidity and feed strategy: when interrupted cuts, variable engagement or higher depths of cut are expected, the universal toughness of this grade supports process reliability. The design reduces the need for frequent tool changes, aiding continuous production and lowering downtime risk. For dependable medium-to-heavy steel turning, specify the Tungaloy DCMT11T304 T9225 insert and contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781486 Manufacturer SKU: TUN6781486 Material: carbide Model series: ISO turning indexable inserts ISO designation: DCMT11T304 Grade: T9225 Facts Insert size: 11 Thickness: 3.97 mm Corner radius: 0.4 mm Main angle: 55° Relief angle: 7° Special features CVD-coated carbide grade T9225 Rhombic insert, one-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-standard geometry for external and internal turning Suitable for medium-to-heavy steel machining FAQ What materials is this insert intended for? The DCMT11T304 T9225 insert is designed primarily for steel machining in medium-to-heavy turning applications, with a universal grade that tolerates varying engagement conditions. How does the T9225 grade affect performance? T9225 is a robust, CVD-coated carbide grade that prioritises toughness and wear resistance, offering extended edge life under fluctuating loads and light interruptions. Which holders are compatible with this insert? Compatibility depends on holder form, free clearance, tolerance class, clamping method, size and thickness; the insert’s ISO-standard dimensions enable use with matching ISO rhombic external holders and boring bars. What are the key mounting features to check before assembly? Confirm the holder accepts a rhombic 55° insert with a 0.4 mm corner radius, 3.97 mm thickness and a cylindrical hole with a 40°–60° countersink to ensure secure clamping and correct seating. Can this insert be used for interrupted cuts? Yes, the T9225 universal grade is engineered for increased toughness, making it suitable for lightly interrupted cuts and varying engagement in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9225 Wendeplatten - Tungaloy
Combining a robust T9225 CVD-coated carbide grade with the ISO DCMT11T304 geometry yields a reliable solution for medium to heavy steel turning and interrupted cuts; the 0.4 mm corner radius and 55° rhombic form balance edge strength and surface finish. Order directly via Metav Werkzeuge or consult their application specialists for matching holders and clamping sets. DCMT 11T304 T9225 Tungaloy indexable insert — ISO turning insert, CVD-coated carbide The DCMT11T304 is an ISO rhombic indexable insert designed for robust turning applications, optimised for varying engagement and lightly interrupted cuts in steel. DCMT11T304 insert, T9225 CVD-coated carbide 55° rhombic shape with 0.4 mm corner radius Suitable for medium to heavy steel turning Cylindrical hole with one-sided countersink Reliable cutting performance for variable engagement The T9225 grade is a CVD-coated carbide designed as a robust universal option for medium to heavy steel machining. Its composition prioritises toughness for changing cutting forces and lightly interrupted cuts, which reduces edge chipping and downtime. The result is predictable tool life and consistent cycle times, making this insert a practical choice where process stability and component repeatability are essential. Geometry and coating that improve productivity A 55° rhombic outline combined with a 0.4 mm corner radius provides a compromise between edge strength and surface finish: the small radius supports durable edges at higher feeds while still delivering acceptable finishes on external profiles. The CVD-coated layer increases wear resistance at elevated temperatures and supports extended runtimes under heavy loading, helping to maintain dimensional accuracy over longer production runs. Clear guidance on compatibility and secure clamping Compatibility with a holder is governed by form, clearance angle 7°, tolerance class, fixing method, size and thickness. The insert is an ISO indexable component intended for use with a matching external holder or boring bar, plus an underlay/clamping set and replacement screws for secure assembly. The plate includes a cylindrical hole with a one-sided countersink (40°–60°), ensuring positive positioning and repeatable clamping in standard ISO systems. Practical selection and application tips Choose the single-sided chipbreaker variant and the T9225 grade when workpieces are steel and conditions include moderate interruptions or variable engagement. For fine finishing or very high-speed turning, consider a smaller feed or alternating to a finer radius; for roughing increase feed and monitor cutting forces. This insert suits both external and internal turning tasks where robustness and versatile performance are required. Contact Metav Werkzeuge for tailored application advice and reliable supply of Tungaloy T9225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781198 SKU: 6781198-Tungaloy Model series: ISO turning indexable inserts ISO designation: DCMT11T304 Facts Shape angle: 55° Corner radius: 0.4 mm Plate thickness: 3.97 mm Plate size: 11 Clearance angle: 7° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Coating: CVD-coated Grade: T9225 Plate form: rhombic Chipbreaker: single-sided Application: turning (external and internal) Intended workpiece: steel (medium to heavy) System build: ISO insert, matching holder/boring bar, underlay/clamping set, replacement screws FAQ What materials is this insert suitable for? The DCMT11T304 in T9225 is intended primarily for steel work, offering a robust option for medium to heavy steel turning with good tolerance to variable cutting conditions. How does the T9225 grade behave under interrupted cuts? Tungaloy's T9225 grade combines toughness and wear resistance so that the insert resists chipping under lightly interrupted cuts, maintaining tool life and process stability. Which holders are compatible with this ISO insert? Compatibility depends on the holder matching the insert form, 7° clearance angle, tolerance class, fixing method, size and thickness; use a suitably rated ISO external holder or boring bar with the correct clamping kit. What effect does the 0.4 mm corner radius have? A 0.4 mm radius increases edge strength for heavier cuts and reduces the risk of fracture while still allowing acceptable surface finish compared with larger radii used for roughing. Is the insert supplied with screws or clamping hardware? The insert is part of an ISO system that typically comprises the insert, matching holder/boring bar, underlay/clamping set and replacement screws; consult Metav Werkzeuge for the correct clamping components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD‑coated carbide, precise 0.4 mm nose radius, and ISO conformity for consistent medium‑to‑heavy‑duty turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application and holder compatibility. DCMT 11T304 T9225 indexable insert for turning by Tungaloy — rhombic, 7° clearance The DCMT11T304 T9225 is an ISO‑standard indexable turning insert engineered for reliable performance in medium to heavy steel machining, offering a balanced mix of toughness and wear resistance. ISO‑standard indexable insert for turning CVD‑coated carbide grade T9225 for steel Rhombic insert, 55° included angle 0.4 mm nose radius and 7° clearance Consistent cutting performance under variable conditions The insert delivers stable results in applications where cutting conditions change or interruptions occur. Its CVD‑coated carbide substrate and the T9225 grade combine to provide improved edge stability and resistance to abrasive wear, which translates into longer tool life and fewer insert changes. For workshops seeking predictable cycle times, the geometry and coating reduce thermal degradation and maintain cutting edge integrity, helping to sustain throughput and reduce unplanned downtime. Geometry and clamping: why compatibility matters for productivity Designed to ISO dimensions, the rhombic shape with a 55° included angle and a 7° clearance ensures compatibility with a wide range of external holders and boring bars. Correct matching of form, clearance angle, tolerance class, fastening and thickness is critical: it secures the insert, optimises chip flow and prevents deflection during heavy cuts. The cylindrical hole with a single‑side countersink (40°–60°) ensures positive seating and repeatable clamping, contributing directly to dimensional accuracy in serial turning operations. Material and chip control explained in plain terms The grade is a CVD‑coated carbide, a coating process that deposits a thin, hard layer to resist abrasion and thermal effects. T9225 is formulated as a universal, tough grade suitable for varied steel types, offering a compromise between wear resistance and fracture toughness. The single‑sided chipbreaker supports discrete chip formation, which is particularly beneficial in interrupted cuts and variable engagement depths, reducing the risk of built‑up edge and easing chip evacuation from the work area. Practical advantages for workshop planning and tool management With a nominal size of 11 mm, a thickness of 3.97 mm and a 0.4 mm nose radius, this insert suits finishing and medium roughing passes where a small nose radius improves surface finish while retaining strength. The ISO standardisation simplifies inventory management and ensures interchangeability across compatible holders, supporting lean tooling strategies. When combined with a suitable holder and clamping set, the insert contributes to stable part quality and repeatable cycle times. For application advice, availability or to purchase the Tungaloy DCMT11T304 T9225 indexable insert, contact Metav Werkzeuge for tailored recommendations and holder compatibility; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6781033 Manufacturer SKU: TUN6781033 SKU: 6781033-Tungaloy Model series: ISO turning indexable inserts Facts Insert size: 11 mm Thickness: 3.97 mm Nose radius: 0.4 mm Clearance angle: 7° Included angle: 55° Hole style: cylindrical hole + one‑side countersink (40°–60°) Special features CVD‑coated carbide, grade T9225 Rhombic insert shape One‑sided chipbreaker ISO‑standardised for turning applications Suitable for medium to heavy steel machining FAQ What materials is this insert suited for? The Tungaloy DCMT11T304 T9225 indexable insert is specified for medium to heavy steel machining and performs well where toughness and wear resistance are required. How does the T9225 grade affect tool life? The T9225 CVD‑coated carbide offers balanced wear resistance and toughness, helping to extend insert life under variable engagement and intermittent cuts. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and is compatible with holders that match the form, clearance angle, tolerance class, fastening and thickness specified for ISO turning inserts. What chip control can be expected with this geometry? With its single‑sided chipbreaker and rhombic form, the insert promotes controlled, short chips in many turning operations, aiding chip evacuation and surface quality. Which SKU should be ordered for this item? Order using SKU 6781033‑Tungaloy or manufacturer SKU TUN6781033 to ensure the correct DCMT11T304 T9225 indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH120 Wendeplatten - Tungaloy
Combining a sharp cutting edge, PVD-coated carbide AH120 and ISO-compliant DCMT geometry, this indexable insert offers reliable process stability and extended edge life for demanding turning operations. Order the insert directly via Metav Werkzeuge or consult our application advisors for process-specific recommendations. DCMT 11T308 AH120 indexable turning insert – PVD-coated carbide, 55° rhomboid – Tungaloy The DCMT 11T308 AH120 is an ISO-standard indexable insert designed for precision external and internal turning where a sharp cutting edge and consistent process security are required. PVD-coated carbide grade AH120 55° rhomboid geometry for versatile turning 0.8 mm corner radius for consistent edge life Cylindrical hole with single-sided countersink Predictable performance through sharp geometry and process security The rhomboid 55° geometry and defined 0.8 mm corner radius give the insert a predictable cutting behaviour that supports stable chip formation in a wide range of turning tasks. The shape is optimised for both external and internal operations, enabling reliable entry and exit performance and reducing vibration risk in stable set-ups. The result is improved dimensional consistency and fewer reworks in serial production, which supports continuous, efficient machining. Adaptable turning capability with ISO-standard compatibility Designed as part of an ISO-series system, the insert matches holders by form, relief angle, tolerance class, fastening, size and thickness. The 7° relief angle and the ISO code 11T308 indicate the standardized seat and clamping requirements; this simplifies tool selection and replacement. When used with a correctly specified holder and clamp set, the insert provides consistent seating accuracy and repeatable positioning, crucial for batch runs and interchangeable tool systems. Wear resistance and tool life from a PVD-coated carbide grade The AH120 grade is a PVD-coated carbide engineered for wear and chipping resistance while maintaining a sharp cutting edge. The coating enhances heat resistance and reduces adhesive wear at elevated cutting temperatures, extending useful life under mixed cutting conditions. In practice, this means longer intervals between indexings and less downtime for tool changes — a direct contribution to higher productive uptime and lower unit costs over time. Practical features that support assembly and stability The insert is supplied with a cylindrical centre hole plus a one-sided countersink (40°–60°), facilitating robust clamping and simple alignment during tool assembly. The 3.97 mm thickness and 11 mm nominal size pair with standard DCMT holders to ensure stable clamping and predictable engagement. The single-sided chipbreaker design should be selected according to workpiece material and machining stability to optimise chip control and surface finish for each application. Contact Metav Werkzeuge today for tailored application advice on Tungaloy indexable inserts and to arrange fast supply for series production Technical data Article number: 6843283 Manufacturer SKU: TUN6843283 Merchant SKU: 6843283-Tungaloy Model series: ISO-indexable turning inserts Material: Carbide Facts Size: 11 mm Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Cutting angle: 55° ISO code: 11T308 Special features PVD-coated carbide (AH120) Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Rhomboid DCMT geometry Suitable for external and internal turning Sharp cutting edge for process stability FAQ What turning operations is this insert designed for? The DCMT 11T308 AH120 insert is intended for both external and internal turning where a sharp edge and process security are priorities. Which coating and grade does the insert use? This insert is supplied in the AH120 grade with a PVD coating on a carbide substrate to improve wear and chipping resistance during turning. How is the insert identified for ordering or replacement? Identification can be made by the designation DCMT 11T308 AH120 and the manufacturer article number 6843283 or the manufacturer SKU TUN6843283. What should be considered when choosing a holder for this insert? Holder compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters to the insert ensures secure clamping and repeatable positioning. Does the insert include a centre hole and countersink? Yes, the insert features a cylindrical centre hole with a one-sided countersink at 40°–60°, designed for stable clamping and easy alignment. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH120 Wendeplatten - Tungaloy
Benefit from the combination of process reliability, wear-resistant PVD-coated carbide, and precise geometry for consistent turning results; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCMT 11T308 AH120 turning insert by Tungaloy — PVD-coated carbide, 0.8 mm corner radius A DCMT11T308 AH120 indexable turning insert designed for ISO‑standard holders, intended for external and internal turning applications where a sharp cutting edge and high process security are required. PVD-coated carbide for wear resistance Sharp cutting edge for process security Rhombic form with 55° included angle Cylindrical hole with countersink 40°–60° High repeatability for reliable production cycles The PVD-coated carbide grade AH120 delivers consistent edge stability and reduced flank wear, which supports longer tool life and predictable part quality. For series production, these properties translate into fewer tool changes and less unplanned downtime. The geometry with a 0.8 mm radius balances cutting-edge strength and surface finish, making the insert suitable for medium to fine finishing cuts while maintaining robust performance under varying cutting conditions. Geometry and holder compatibility explained for quick selection The rhombic shape with a 55° included angle conforms to ISO turning formats and is compatible with ISO toolholders that match the form, relief angle, tolerance class, fastening style, size and thickness. The insert’s cylindrical hole with a single-sided countersink (40°–60°) enables secure clamping and repeatable positioning in standard clamping systems. When choosing a holder, ensure matching pocket geometry and screw type to achieve optimal seat contact and stable cutting behaviour. Chip control and application suitability for turning tasks This cutting grade is produced with a single-sided chipbreaker adapted to common turning operations; it manages chip formation effectively for many steels and alloyed materials. The combination of grade and cutter geometry supports stable cutting at moderate feeds and cutting depths, reducing vibration and improving surface integrity. For users less familiar with insert grades: a chipbreaker shapes the chip to prevent long, entangling swarf and to protect the cutting edge during continuous cuts. For tailored advice on applying the Tungaloy DCMT11T308 AH120 insert in specific turning tasks, contact Metav Werkzeuge for technical consultation and availability. Technical Data Article number: 6818559 SKU: 6818559-Tungaloy Manufacturer SKU: TUN6818559 Model series: ISO turning indexable inserts Material: Carbide Numbers / Core technical data Insert size: 11 Thickness: 3.97 mm Included angle: 55° Corner radius: 0.8 mm Relief angle: 7° Designs / Special features Shape: Rhombic (DCMT) Hole: with hole; cylindrical hole + single-sided countersink 40°–60° Grade: AH120 (PVD-coated) Chipbreaker: Single-sided Application: Turning; external and internal turning FAQ What materials is this insert suitable for? The AH120 grade and carbide substrate are intended for a wide range of turning tasks; the Tungaloy DCMT11T308 AH120 insert performs well on many steels and alloyed materials when cutting parameters are chosen to match component stability and machine capability. How is compatibility with a toolholder ensured? Compatibility depends on matching the insert form, relief angle, tolerance class, fastening method, size and thickness; the rhombic DCMT geometry and ISO numbering make it straightforward to compare with ISO‑compliant holders. What is the purpose of the countersunk hole design? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and repeatable seating in standard clamping systems, helping to maintain consistent cutting conditions and tool life. Can this insert be used for finishing and light roughing? Yes — the combination of a 0.8 mm corner radius and the sharp cutting edge in grade AH120 makes the insert suitable for both finishing and light roughing, provided cutting speeds and feeds are adjusted according to the workpiece material and machine rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH6225 Wendeplatten - Tungaloy
High cutting-edge stability from the AH6225 grade together with a 0.8 mm corner radius and ISO compatibility ensure consistent surface finish and predictable tool life in medium turning operations; order directly via Metav Werkzeuge or consult our technical advisors for application matching. DCMT 11T308 AH6225 – Tungaloy indexable insert for turning, PVD‑coated carbide, 0.8 mm radius The DCMT11T308 AH6225 is an ISO‑standard rhombic indexable insert designed for reliable external and internal turning on corrosion‑resistant steels and similar alloys PVD-coated carbide grade AH6225 Suited to corrosion-resistant steels 55° rhombic shape, 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Consistent edge performance for medium turning The combination of a PVD‑coated surface and the AH6225 carbide formulation produces a stable cutting edge that withstands fluctuating conditions common in batch production and mixed‑material jobs. This material pairing reduces notch wear on austenitic and ferritic workpieces and supports longer index intervals, which translates into fewer tool changes and improved throughput. The PVD finish also helps maintain a smooth flank contact for repeatable surface quality. ISO compatibility and secure clamping for predictable results Built to ISO dimensions, the insert's 55° rhombic geometry and precise plate thickness ensure compatibility with a wide range of external holders and boring bars. The cylindrical hole with one‑sided countersink (40°–60°) provides secure fastening and minimises micro‑movement under heavy interrupted cuts. Clear specification of shape, clearance angle and tolerance class simplifies toolholder selection and reduces downtime associated with incorrect matching. Geometry tuned for finish and strength A 0.8 mm corner radius balances edge strength and surface finish: the modest radius supports improved chip formation and reduces the tendency for edge chipping compared with sharper radii, while still allowing good contour definition. The one‑sided chipbreaker is profiled for medium machining, promoting controlled chip flow and reduced heat concentration at the cutting zone. With a 7° clearance, the insert offers stable contact geometry that assists in consistent cutting forces and repeatable part tolerances. Choose Tungaloy AH6225 for robust, repeatable turning — contact Metav Werkzeuge for technical matching or order via info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6829547 Manufacturer: Tungaloy Manufacturer SKU: TUN6829547 Facts Thickness: 3.97 mm Corner radius: 0.8 mm Included angle: 55° Clearance angle: 7° Size: 11 Special features Material: carbide Grade: AH6225 Coating: PVD coating on carbide Shape: rhombic Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: turning ISO designation: 11T308 FAQ Which materials is this insert best suited for? The DCMT11T308 AH6225 insert is optimised for corrosion‑resistant steels and similar alloys; the AH6225 grade and PVD finish provide balanced wear resistance and edge sharpness for these materials. How does the 0.8 mm radius influence surface finish and tool life? A 0.8 mm corner radius increases edge robustness compared with finer radii, improving resistance to chipping while still allowing good surface finish when cutting with moderate feeds. What clamping features ensure secure mounting? Compatibility is achieved through ISO sizing and the insert's cylindrical hole with a one‑sided countersink (40°–60°), which enables safe, repeatable seating in standard external holders and boring bars. Is this insert suitable for internal turning operations? Yes, the rhombic 55° form and chip control geometry make the insert appropriate for both external and internal turning tasks, provided a matching ISO‑compliant boring bar or holder is used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade that balances a sharp cutting edge with stability and a compact 0.8 mm corner radius for repeatable medium turning operations; the ISO‑format design ensures straightforward replacement and compatibility with standard holders. Order the DCMT11T308 AH6225 insert directly via Metav Werkzeuge or ask our consultants for setup advice. DCMT11T308 AH6225 Tungaloy indexable turning insert — PVD‑coated carbide for turning (ISO 11T308) A DCMT11T308 AH6225 indexable insert designed for precision external and internal turning, optimised for stainless steels and variable workshop conditions PVD‑coated carbide AH6225 for stainless steels Universal grade for medium‑condition turning ISO DCMT11T308 format for easy replacement Cylindrical hole with one‑side countersink (40°–60°) Consistent cutting performance for stainless‑steel turning The combination of a PVD‑coated surface on a carbide substrate and the AH6225 grade produces a cutting edge that is both sharp and robust, which is important when machining stainless steels under changing conditions. This specification reduces edge wear and helps to maintain a predictable tool life during medium‑duty turning. The one‑sided chipbreaker is tailored to generate controllable chips and a stable chip flow, which in turn supports steady cutting forces and improved surface finish. Geometry that simplifies setup and increases stability The insert follows the ISO 11T308 format and a rhombic outline with a 55° included angle, enabling versatile approaches for external and internal turning. Key dimensions such as the 0.8 mm corner radius, 3.97 mm thickness and the 7° clearance angle ensure a consistent seating and predictable contact with the workpiece; the cylindrical hole with a single‑side countersink (40°–60°) allows secure clamping in compatible holders. These precise features make it easier to select matching holders and clamping sets and reduce time spent on trial adjustments. Shop‑floor advantages and system considerations As part of an ISO insert system, the component integrates with a suitable external holder or boring bar, plus an appropriate shim/clamp set and spare screws to form a reliable tooling assembly. The AH6225 grade offers a broad material capability for stainless steels while keeping economy and process robustness in balance. For everyday production, this results in fewer interruptions, consistent surface quality and an overall improvement in process reliability. The insert is identified as SKU 6947701‑Tungaloy and manufacturer article number TUN6947701 for ordering and inventory control. For precision turning tasks that demand process stability, contact Metav Werkzeuge for ordering and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and compatible holder options. Technical data Article number: 6947701 SKU: 6947701‑Tungaloy Manufacturer SKU: TUN6947701 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Thickness: 3.97 mm Inscribed circle/size: 11 mm Clearance angle: 7° Included angle: 55° Special features PVD‑coated carbide, grade AH6225 One‑sided chipbreaker Rhombic plate form (DCMT) Cylindrical hole with single‑side countersink (40°–60°) ISO‑format insert for turning applications Suitable for machining stainless steels System requires matching external holder, shim/clamp set and screws FAQ What materials is this insert intended for? The AH6225 grade and PVD coating make the DCMT11T308 insert particularly suitable for machining stainless steels, offering a balance between edge sharpness and durability. How does the insert fasten to a holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) and is designed to be secured with the corresponding clamp or screw system in ISO‑compatible external holders. What is the corner radius and why does it matter? The corner radius is 0.8 mm; this small radius supports finer finishing capability while maintaining edge strength for medium cutting conditions. Is this an ISO‑standard insert and how does that help? Yes, the DCMT11T308 follows ISO 11T308 format, which simplifies replacement and compatibility checks with standard holders and reduces setup time. How can the insert be identified for ordering or stock? Order or reference by SKU 6947701‑Tungaloy or manufacturer article number TUN6947701 to ensure the correct DCMT11T308 AH6225 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade, a 0.8 mm corner radius and ISO conformity to achieve stable, repeatable stainless steel turning; order the inserts directly via Metav Werkzeuge or consult our team for application advice. DCMT11T308 AH6225 indexable turning insert – rhombic 55° geometry | Tungaloy The DCMT11T308 AH6225 is an ISO-standard indexable insert engineered for external and internal turning of stainless steels, offering a sharp yet robust cutting edge for medium machining conditions PVD-coated carbide for stainless steel 0.8 mm corner radius for reliable edge Rhombic 55° insert for versatile turning Cylindrical hole with 40°–60° countersink Consistent cutting performance for stainless steels The AH6225 grade combines a PVD coating with a wear-resistant carbide substrate to deliver a balance of edge sharpness and stability. This results in a predictable cutting behaviour in the often-demanding metallurgy of stainless steel, reducing chatter and improving surface finish. By selecting a universal grade designed for changing conditions, operators gain the rational benefit of fewer insert changes and more consistent cycle times, supporting efficient shop-floor planning and cost control. Geometry and clamping that support process reliability A rhombic 55° geometry with a 0.8 mm corner radius provides flexibility for a range of turning tasks, permitting modest step-over depths while maintaining strength at the insert tip. The insert is ISO-conforming, with a 7° clearance angle and a plate thickness of 3.97 mm, which together ensure compatibility with standard holders when form, fixation and tolerance class match. The cylindrical hole with a single-sided countersink (40°–60°) secures repeatable clamping and simple indexation, reducing set-up time and contributing to reproducible component quality. Practical advantages and recommended applications Designed for both external and internal turning, this single-sided chipbreaker insert suits medium machining of stainless steels where a stable cutting edge is required. The combination of a universal chipbreaker and the AH6225 grade delivers a consistent surface finish and predictable tool life, helping to avoid unscheduled downtime. For best results, pair the insert with a correctly matched external holder or boring bar and select the chipbreaker and cutting parameters to suit the component material and machine rigidity. Contact Metav Werkzeuge for tailored application guidance and to request the Tungaloy DCMT11T308 AH6225 insert for reliable stainless steel turning Technical data Article number: 6829448 Manufacturer SKU: TUN6829448 Label: DCMT11T308 AH6225 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate size: 11 mm Plate thickness: 3.97 mm Clearance angle: 7° Insert angle: 55° Special features Grade/coating: AH6225, PVD-coated carbide Plate shape: Rhombic Hole: with cylindrical hole and single-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: external and internal turning FAQ What materials is this insert suitable for? The DCMT11T308 AH6225 insert is formulated for machining stainless steel, with the AH6225 PVD-coated carbide grade offering good performance across varying stainless alloys. Which holder types are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, fixation, size and thickness; the ISO-standard design of the DCMT11T308 ensures it fits standard external holders and boring bars that accept rhombic 55° inserts. How does the 0.8 mm corner radius affect machining? A 0.8 mm radius increases edge strength compared with a finer point, improving resistance to chipping and helping to achieve consistent surface quality in medium cutting conditions. Is the insert single- or double-sided, and what does that mean for inventory? This is a single-sided insert with a single-sided chipbreaker; while it offers fewer cutting edges per insert than double-sided types, the universal AH6225 grade can reduce the total number of different inserts required for stainless steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH6225 Wendeplatten - Tungaloy
Take advantage of high process reliability, a sharp yet stable cutting edge and universal compatibility for turning operations; order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. DCMT 11T308 AH6225 DCMT11T308 — Tungaloy turning insert, rhombic 55° DCMT11T308 AH6225 is an ISO-standard indexable turning insert for general turning; designed for medium machining of stainless steels with a sharp, stable cutting edge and one-sided chipbreaker. PVD-coated carbide grade AH6225 Universal for stainless steels Rhombic 55° geometry Cylindrical hole with 40°–60° countersink Precise performance where stability matters The insert delivers consistent cutting due to its PVD-coated carbide matrix and a grade tailored for stainless steels. The combination of a finely tuned cutting edge and the AH6225 grade produces stable chip formation under variable conditions, which reduces rework and improves component quality. As an ISO-format indexable solution, it supports reproducible results in serial production and contributes to predictable tool life and process stability. Secure clamping and geometric advantages The rhombic 55° shape and the cylindrical hole with single-side countersink (40°–60°) ensure reliable seating in compatible holders. The certified geometry, together with a 7° relief angle and a plate thickness of 3.97 mm, minimises unexpected movement during cuts, enabling secure clamping and straightforward insert indexing. Compatibility to the holder depends on form, relief angle, tolerance class, fastening, size and thickness, so matching the insert to the correct external holder ensures optimal clamping and performance. Coating and grade explained for practical benefit The PVD coating on this indexable insert increases wear resistance while preserving a sharp edge, which is particularly beneficial when machining austenitic stainless steels. The AH6225 grade is engineered to give a balance between edge sharpness and robustness for medium-duty turning; this means fewer interruptions for insert changes and a more economical production flow. In practice, the coating reduces adhesion and built-up edge, improving surface finish and extending the useful life of the cutting edge. Application guidance for reliable throughput Intended for external and internal turning, the insert performs best when paired with a holder and clamping set that match the ISO designation and geometry. The 0.8 mm corner radius provides a compromise between strength and surface finish; choose this radius for medium-strength finishing and light semi-finishing passes. For one- or multi-pass operations in stainless steels, select feeds and speeds aligned with the grade’s stability: moderate cutting speeds and steady feeds help avoid chatter and promote reproducible tool life. For setups with changing conditions, the universal nature of the grade simplifies tool selection and inventory management. Contact Metav Werkzeuge for tailored application advice and fast supply of the DCMT11T308 AH6225 Tungaloy turning insert; technical consultants are available to support holder matching and process parameters. Technical Data Article number: 6947695 Manufacturer SKU: TUN6947695 SKU: 6947695-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.8 mm Included angle: 55° Relief angle: 7° Plate thickness: 3.97 mm Insert size: 11 Special features PVD-coated carbide grade AH6225 Universal grade for stainless steels Rhombic insert shape One-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) ISO-standard indexable turning insert Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DCMT11T308 AH6225 Tungaloy insert is designed primarily for machining stainless steels and offers stable chip formation and good edge performance for medium turning operations. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the DCMT11T308 AH6225 insert couples with standard ISO turning holders that accept rhombic 55° plates. How does the AH6225 grade affect machining results? The AH6225 PVD-coated grade combines a sharp cutting edge with wear resistance to reduce built-up edge and improve surface finish in medium-duty stainless steel turning with the DCMT11T308 insert. What is the purpose of the 0.8 mm corner radius? A 0.8 mm corner radius on the DCMT11T308 insert provides a balance between cutting-edge strength and achievable surface finish, suitable for finishing and light semi-finishing passes. Are there any special mounting considerations for the insert? Ensure the insert seats correctly in a matched holder and that the fastening torque and clamping parts are appropriate for ISO rhombic inserts; correct seating prevents movement and secures repeatable performance for the DCMT11T308 AH6225. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH6225 Wendeplatten - Tungaloy
Take advantage of a universal PVD-coated AH6225 grade that combines a sharp, stable cutting edge with consistent chip control for rostfreier Stahl turning; the ISO rhombic geometry with a 55° lead angle and 0.8 mm corner radius balances surface finish and edge life. Order compatible inserts or request application advice via Metav Werkzeuge for seamless tool integration. DCMT 11T308 AH6225 – Tungaloy indexable turning insert for turning A DCMT11T308 AH6225 indexable turning insert engineered for reliable external and internal turning of rostfreier Stahl in medium-duty and variable conditions PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl machining 55° rhombic geometry for versatile turning 0.8 mm nose radius for balanced finish and strength Cylindrical hole with 40°–60° countersink Consistent chip control for improved process reliability The combination of a PVD-coated surface and AH6225 carbide substrate delivers stable cutting behaviour when machining rostfreier Stahl. The coating reduces built-up edge formation while the carbide core preserves a sharp cutting line under changing conditions, which translates into fewer interruptions for tool changes and a more predictable production rhythm. By choosing a grade designed for stainless applications, the cutting edge maintains performance across variable feed and speed settings, improving overall process efficiency and reducing scrap rates. Geometry that balances finish and edge security The rhombic 55° geometry and a 0.8 mm corner radius are tailored to offer a compromise between surface finish and mechanical strength. The insert's shape distributes cutting forces efficiently, enabling good access for turning profiles while the modest nose radius contributes to a consistent surface without compromising the edge under intermittent cuts. A 3.97 mm plate thickness supports secure clamping and a stable cutting position, while the cylindrical hole with a one-sided countersink (40°–60°) ensures repeatable seating and torque transmission in standard ISO holders. System compatibility and straightforward integration Manufactured to ISO norms, this indexable insert integrates into common turning tool systems. Compatibility depends on form, relief, tolerance class, fastening, size and thickness; the typical system includes the insert itself, a matching external holder or boring bar, a shim or clamping set and replacement screws. Selecting the correct chipbreaker and grade according to material, machining strategy and machine stability is decisive: the single-sided chipbreaker of this insert promotes controllable chip formation in many turning tasks and simplifies process setup. Practical benefits and intended applications Designed for external and internal turning, the insert suits medium machining of rostfreier Stahl where a sharp, wear-resistant edge is required. The PVD finish supports reduced adhesion and improved surface integrity, leading to steadier tool life and consistent part quality. For production environments where repeatability and predictable maintenance intervals matter, this option helps to lower downtime and stabilise cycle time. The insert is particularly apt for shops seeking a universal solution for stainless applications without overly specialised cutting parameters. Contact Metav Werkzeuge for tailored advice on Tungaloy AH6225 inserts and to order compatible DCMT11T308 indexable turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903299 Manufacturer SKU: TUN6903299 Our SKU: 6903299-Tungaloy Model series: ISO-Drehwendeschneidplatten Key dimensions / measurable data Geometry: DCMT 11T308 Inscribed circle: 11 mm Thickness: 3.97 mm Corner radius: 0.8 mm Lead angle: 55° Relief angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Materials / special features Carbide, PVD-coated, grade AH6225 Single-sided chipbreaker Rhombic insert shape Application: Turning (external and internal) Compatibility depending on form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The DCMT11T308 AH6225 insert is optimised for machining rostfreier Stahl; the PVD-coated AH6225 grade provides improved resistance to adhesion and steady cutting behaviour in stainless applications. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief, tolerance class, fastening, size and thickness; the insert fits standard ISO rhombic turning holders and can be used in external holders or boring bars when the clamping geometry matches. What is the function of the one-sided chipbreaker? The single-sided chipbreaker promotes controlled chip formation during turning, which helps maintain consistent cutting forces and a predictable surface finish when machining rostfreier Stahl. How does the 0.8 mm nose radius affect machining? A 0.8 mm corner radius offers a balance between surface finish and edge strength, delivering a reliable finish on turned parts while providing sufficient edge support for medium machining operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide longevity, a 0.8 mm corner radius for a robust cutting edge and reliable ISO compatibility to keep production steady and predictable. Order the DCMT11T308 AH6225 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T308 11T308 AH6225 Turning insert — PVD-coated carbide, 55° rhombic, Tungaloy The DCMT11T308 is an ISO rhombic turning insert designed for external and internal turning, delivering a stable cutting edge and versatile performance in varying workshop conditions. PVD-coated carbide AH6225 Optimised for rostfreier Stahl machining Rhombic DCMT form with 55° cutting angle 0.8 mm corner radius for robust edge Single-sided chipbreaker; cylindrical hole Efficient cutting performance and predictable tool life The PVD-coated carbide grade AH6225 offers a balance between a sharp cutting edge and edge stability, making it particularly suitable for medium cutting operations under changing conditions. The PVD coating reduces flank wear and improves surface integrity, which translates into fewer insert changes and lower process costs over time. For workshops that value throughput and consistent quality, this insert reduces unexpected downtime while maintaining reliable part finish. The proven geometry supports sustained metal removal rates without sacrificing edge life, so production runs remain predictable. Seamless integration into ISO holder systems Compatibility with ISO holder systems is governed by form, relief angle, tolerance class, mounting, size and thickness; the rhombic DCMT form and the specified relief angle ensure correct seating and repeatable positioning. Using the correct clamping kit and replacement screws completes the system: insert, suitable external holder or boring bar, shim/clamping set and spare screws. This clarity in system setup simplifies tool management and stocking, reduces set-up time between jobs and ensures that a change of insert restores original cutting conditions quickly and reliably. Geometry engineered for reliable machining results The 55° lead angle and 0.8 mm corner radius create a cutting geometry that combines strength with a good surface finish, while the single-sided chipbreaker directs chips consistently for safer evacuation. The plate’s cylindrical hole with a one-sided countersink (40°–60°) provides secure clamping and accurate seating under cutting forces. Together, these features deliver repeatable part quality and lower burr formation, especially when machining rostfreier Stahl. The robust carbide core resists chipping at interruptions, and the rhombic shape offers flexibility for both external turning and internal operations where access and clearance are factors. For application-specific recommendations on the Tungaloy AH6225 insert and to confirm availability, contact Metav Werkzeuge for tailored machining advice and fast fulfilment Technical data Article number: 6829645 SKU: 6829645-Tungaloy Manufacturer SKU: TUN6829645 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core specifications Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 7° Plate thickness: 3.97 mm Plate size: 11 mm Design & special features PVD-coated carbide grade AH6225 Rhombic plate, DCMT form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Compatible with ISO turning holders Intended use: Turning (external and internal), optimised for rostfreier Stahl FAQ What applications is this insert suitable for? The DCMT11T308 AH6225 Tungaloy turning insert is intended for external and internal turning; the AH6225 grade is a universal choice for rostfreier Stahl and medium cutting conditions. How does one ensure correct holder compatibility? Compatibility is determined by form, relief angle, tolerance class, mounting, size and thickness; selecting an ISO-compatible holder and correct clamping set ensures the DCMT11T308 seats and clamps reliably. Can this insert deliver a good surface finish? Yes, the combination of the PVD-coated carbide AH6225, the 55° geometry and the 0.8 mm corner radius produces a stable cutting edge that supports consistent surface quality in finishing and semi-finishing passes. Is the insert suitable for interrupted cuts or unstable conditions? The robust carbide substrate and the optimised edge geometry provide resistance to chipping, making the insert suitable for operations with occasional interruptions or variable machining conditions. What does the hole and countersink style affect in practice? The cylindrical hole with a single-sided countersink (40°–60°) secures accurate seating and clamping, reducing the risk of movement under load and improving repeatability for production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough PVD-coated AH6235 grade and a 55° rhombic geometry with 0.8 mm corner radius for reliable performance in interrupted cuts and stainless-steel turning; order directly via Metav Werkzeuge or ask the consultants for application support. DCMT11T308 AH6235 ISO turning insert for turning applications, Tungaloy A DCMT11T308 AH6235 indexable turning insert optimised for external and internal turning of stainless steels and for interrupted cutting conditions ISO rhombic insert, 55° geometry PVD-coated carbide grade AH6235 Suitable for stainless steels and interrupted cuts Cylindrical hole with one-sided countersink 40°–60° Improved tool life and consistent results for demanding materials The PVD-coated AH6235 grade delivers a tougher carbide matrix designed to resist edge chipping during challenging operations. In machining stainless steels and applications with frequent interruptions, the harder-wearing surface and optimised microstructure result in reduced flank wear and longer intervals between insert changes. This improves process stability and helps to maintain a consistent surface finish, which is especially relevant for serial production or critical single-part runs. Geometry and chip control that stabilise the cutting process The rhombic 55° profile combined with a 0.8 mm corner radius and a 7° clearance angle balances edge strength with access to contour features. The integrated single-sided chipbreaker promotes controlled chip formation and evacuation, lowering the likelihood of built-up edge and subsequent workpiece damage. The insert’s cylindrical hole with a one-sided countersink (40°–60°) ensures repeatable seating and secure clamping in ISO-compatible toolholders, contributing to reliable run-out and repeatability across tool changes. System compatibility and efficient workshop integration As an ISO-standard insert, this part is intended to function within a complete turning system: indexable insert, matched external holder or boring bar, shim/clamping set and replacement screws. Compatibility depends on insert form, clearance angle, tolerance class, fastening and thickness, so selection of the correct holder is essential for achieving the expected performance. Designed for both external and internal turning, the insert supports a productive workflow with fewer interruptions, reduced setup time and predictable machining cycles. For robust stainless-steel turning choose Tungaloy AH6235 inserts and contact Metav Werkzeuge for application consulting or to place an order via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6890175 Manufacturer SKU: TUN6890175 Our SKU: 6890175-Tungaloy Name: DCMT11T308 AH6235 Tungaloy indexable insert Material: Carbide (Hartmetall) Coating: PVD Application: Turning Model series: ISO turning inserts Numbers / Core technical data Corner radius: 0.8 mm Main angle: 55° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 11 mm Special features / Versions Grade AH6235 for stainless steels and interrupted cuts PVD-coated carbide for enhanced edge stability Rhombic 55° plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-standardised insert compatible with appropriate holders Intended for external and internal turning FAQ Is this insert suitable for machining stainless steels? The DCMT11T308 AH6235 Tungaloy indexable insert (SKU 6890175-Tungaloy) is optimised for stainless steels and for operations with a higher risk of edge breakout thanks to its tougher PVD-coated AH6235 grade. Which holders are compatible with this insert? Compatibility requires an ISO-compatible holder or boring bar that matches the insert form, clearance angle, tolerance class, fastening method, size and thickness; proper shims and a clamping set are recommended for secure seating. What advantages does the AH6235 grade provide? AH6235 offers improved edge strength and wear resistance for interrupted cuts and stainless-steel applications, resulting in longer tool life and more consistent surface quality. How does the chipbreaker influence machining? The single-sided chipbreaker supports controlled chip formation and evacuation, which reduces built-up edge and improves process reliability during turning. How is the insert clamped in the toolholder? Clamping is achieved via the cylindrical hole with a one-sided countersink (40°–60°) together with the appropriate shim and clamping set, providing repeatable positioning and stable fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH6235 Wendeplatten - Tungaloy
Take advantage of a tough PVD-coated carbide grade and a strong rhombic geometry to maintain process stability and reduce insert change frequency. The combination of a 55° approach angle and a 0.8 mm corner radius offers balanced edge strength and versatility for external and internal turning. Order directly via Metav Werkzeuge or consult the team for application-specific advice. DCMT 11T308 AH6235 Tungaloy indexable insert for turning, 55° rhombic The DCMT 11T308 AH6235 is an ISO-compatible indexable insert designed for general turning applications, especially where interrupted cuts and stainless steels require a tougher grade. PVD-coated carbide AH6235 for stainless steel 55° rhombic geometry for precise turning 0.8 mm corner radius for reliable edge strength Cylindrical hole with 40°–60° countersink Consistent cutting performance for demanding stainless steel work The PVD-coated AH6235 grade combines a tougher substrate with a wear-resistant surface layer to extend tool life when machining stainless steel and other difficult-to-cut materials. The coating reduces flank wear and helps maintain cutting-edge integrity under interrupted cutting conditions. For workshops aiming to increase uptime, this grade is specified for applications with elevated break-out risk and where chip control and repeatable performance are critical. Geometry and dimensions that support stable, precise turning A 55° rhombic geometry provides a versatile approach angle suitable for both external and internal turning operations, enabling reliable surface finish with controlled cutting forces. The 0.8 mm corner radius enhances edge strength, reducing chipping on entry and exit. The insert thickness of 3.97 mm and nominal size 11 contribute to rigidity in the tool assembly, while the cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and repeatable positioning in compatible holders. Application-focused design for efficient machining and reduced downtime Specified for turning, the insert performs well in interrupted cuts and in the machining of stainless steels where toughness is prioritised over maximum hardness. Compatibility with a given holder depends on form, clearance angle, tolerance class, fastening type, size and thickness; this ensures that when matched correctly, the system delivers consistent chip formation and improved production stability. Selecting the appropriate chipbreaker and grade to suit material and machining strategy maximises economy and surface quality. Simple selection guidelines and workshop advantages When replacing or specifying inserts, match the ISO designation and check holder compatibility for clearance and fastening. The PVD layer and carbide substrate are aimed at balancing wear resistance with fracture toughness, making this insert suited for mixed-batch production where material variability occurs. For shops seeking a pragmatic, application-oriented solution, this insert supports productive machining with fewer unexpected tool failures and predictable change intervals. Contact Metav Werkzeuge for tailored recommendations on Tungaloy DCMT 11T308 AH6235 inserts and to discuss holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6890179 Manufacturer SKU: TUN6890179 Model series: ISO turning indexable inserts Material: Carbide Grade/coating: AH6235 (PVD-coated) Facts Insert designation: DCMT11T308 Size: 11 Thickness: 3.97 mm Clearance angle: 7° Lead/angle: 55° Corner radius: 0.8 mm Special features Rhombic insert form Single-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) Intended application: Turning (external and internal) Suited for interrupted cuts and stainless steels FAQ What materials is the insert suited for? The DCMT 11T308 AH6235 insert is designed for machining stainless steels and applications with interrupted cuts where a tougher grade is required. Which chipbreaker should be chosen for best results? Select the chipbreaker that matches the machining strategy and material; the DCMT 11T308 AH6235 is supplied with a single-sided chipbreaker appropriate for general turning. How does the PVD coating affect performance? The PVD coating on the AH6235 grade improves wear resistance while the tougher substrate helps prevent chipping during interrupted operations. What determines holder compatibility for this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening type, size and thickness; these parameters ensure correct seating and clamping of the DCMT 11T308 AH6235 insert. Is this insert suitable for internal turning? Yes, the 55° rhombic geometry and available sizes make the insert suitable for both external and internal turning when used with a compatible holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide toughness, a precise 0.8 mm corner radius and ISO compatibility for reliable turning results; order inserts directly via Metav Werkzeuge or consult the team for application-specific advice. DCMT11T308 AH6235 Tungaloy turning insert — PVD-coated carbide, 7° clearance A DCMT11T308 AH6235 Tungaloy turning insert engineered for external and internal turning where interrupted cuts and stainless steels require a tougher grade PVD-coated carbide for tough materials 7° clearance angle for stable cutting Rhombic format, ISO-compliant geometry 0.8 mm corner radius for consistent finishes Increased process reliability for demanding turning operations This indexable insert brings consistent chip control and extended edge life through its PVD-coated carbide grade. The AH6235 designation indicates a tougher substrate optimised for stainless steel and interrupted cuts, which reduces the risk of edge chipping under unstable conditions. The ISO-compliant rhombic geometry ensures compatibility with a wide range of external holders and boring bars, enabling smooth integration into existing setups and predictable cutting behaviour. Precision features that support surface quality and repeatability The combination of a 0.8 mm corner radius and a 7° clearance delivers a balance between cutting edge strength and surface finish. The small corner radius allows for accurate profile control, while the specified clearance minimises rubbing and heat buildup at the flank, contributing to repeatable part quality over longer runs. Operators benefit from fewer part reworks and more consistent dimensional results when the insert is matched to appropriate speeds and feeds. Practical design that simplifies tool selection and mounting The insert is supplied in the ISO designation DCMT11T308 and features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping. Plate thickness of 3.97 mm and standard size 11 ensure fitment across many holders; selection depends on holder form, free angle, tolerance class and fastening system. The single-sided chipbreaker helps channel chips away from the cutting zone, reducing heat concentration and supporting uninterrupted cycle times in medium-duty turning. Proven brand performance and application guidance Manufactured by Tungaloy, this grade reflects a focus on productive machining with modern coating technology and robust substrate properties. The insert suits applications where controlled fracturing or frequent interruptions occur and where a durable cutting edge is essential. For tailored process parameters and matching holder suggestions, technical consultation is available to align the insert grade and chipbreaker with the workpiece material and machining stability. Contact Metav Werkzeuge today for tailored advice on Tungaloy turning solutions and availability, or ask for an application recommendation from Metav Werkzeuge' consultants Technical Data Article number: 6890182 Manufacturer SKU: 6890182-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: DCMT11T308 Facts Corner radius: 0.8 mm Clearance angle: 7° Included angle: 55° Plate thickness: 3.97 mm Insert size: 11 Special features Material: PVD-coated carbide Grade: AH6235 Shape: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: turning (external and internal) FAQ What materials is this insert best suited for? The DCMT11T308 AH6235 Tungaloy insert is designed primarily for stainless steel and applications with interrupted cuts, where the tougher PVD-coated carbide grade reduces the risk of chipping. How does the 0.8 mm corner radius affect finishing? A 0.8 mm corner radius provides a compromise between edge strength and surface finish; the insert produces consistent profiles while maintaining robustness under variable cutting conditions. Is the insert compatible with standard ISO holders? Yes, the ISO designation DCMT11T308 and rhombic format ensure compatibility with matching ISO external and internal turning holders when form, free angle and fastening match the holder specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 cemented carbide, ISO-compliant geometry and a fracture-resistant chip control for reliable turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. DCMT 11T308 AH725 – Indexable turning insert, PVD-coated carbide by Tungaloy A DCMT 11T308 AH725 indexable insert designed for ISO-compliant external and internal turning, suited to Stahl and rostfreier Stahl machining. ISO-compatible DCMT geometry for secure clamping PVD-coated AH725 grade for broad Stahl applications Fracture-resistant chip control for process security Consistent cutting performance with broad material coverage The insert combines a PVD-coated surface with a cemented carbide substrate to deliver consistent tool life and stable cutting under variable conditions. The AH725 grade is specified as a universal, outbruchfeste (fracture-resistant) grade suitable for a wide range of Stahl and rostfreier Stahl; this means fewer tool changes when batches include mixed materials. The coating reduces built-up edge and improves wear resistance, which maintains dimensional stability over longer runs and supports higher productivity in serial turning operations. Secure fit and system compatibility for predictable results Designed to the ISO turning insert standard, the rhombic form with a 55° included angle and a 7° clearance angle ensures repeatable seat contact and reliable clamping in compatible holders. The geometry and tolerance class determine compatibility with external holders and boring bars; the system typically comprises the ISO insert, a matching holder or boring bar, a shim/clamp set and replacement screws. The insert’s rhombic shape and central hole with a single-sided countersink provide secure location and repeatable seating, which reduces setup time and improves process reproducibility. Practical advantages in chip control and edge robustness The one-sided chipbreaker and a corner radius of 0.8 mm balance strength and surface finish: the chipformer directs chips away from the cut while the radius increases edge resilience against fracture, particularly on interrupted cuts or unstable setups. This fracture-resistant behaviour makes the grade especially useful for smaller tooling and applications with high demands on process security. If further guidance is required on holder matching or optimal cutting parameters, technical assistance is available by e‑mail or phone to ensure the insert fits the specific turning task. For application-specific advice on Tungaloy AH725 inserts and tailored recommendations contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — specialists are available to support the selection and integration process Technical data Article number: 6856710 Manufacturer SKU: TUN6856710 SKU: 6856710-Tungaloy Series: ISO-Drehwendeschneidplatten Designation: DCMT11T308 AH725 Facts Corner radius: 0.8 mm Included angle: 55° Clearance angle: 7° Thickness: 3.97 mm Size: 11 Special features PVD-coated cemented carbide AH725 One-sided chipbreaker Rhombic insert form With hole; cylindrical hole + single-sided countersink (40°–60°) ISO-compatible for external and internal turning Compatibility determined by form, clearance angle, tolerance, clamping, size and thickness Typical system: insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What applications is this insert intended for? The Tungaloy DCMT11T308 AH725 indexable turning insert is intended for external and internal turning and is especially suitable where mixed Stahl and rostfreier Stahl workpieces are encountered. How does the AH725 grade affect performance? The AH725 PVD-coated grade offers a balance of wear resistance and fracture resistance; in practice the AH725 grade helps maintain dimensional stability and reduces the need for frequent tool changes. What does the one-sided chipbreaker do? The one-sided chipbreaker shapes and controls chip flow to prevent entanglement and to ease chip evacuation, improving surface finish and reducing the risk of tool breakage in interrupted cuts. Which holders are compatible with this insert? Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; the rhombic DCMT geometry and central hole suit standard ISO holders and boring bars that accept 11-size inserts. How does the corner radius influence results? A 0.8 mm corner radius increases edge strength and improves surface quality on finishing passes; it is a compromise between durability and achievable finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH725 Wendeplatten - Tungaloy
Combine high process reliability, universal material coverage and a compact 55° geometry for precise turning results; the combination of PVD-coated carbide AH725 and a 0.8 mm corner radius supports stable chip formation and long tool life. Order genuine stock via Metav Werkzeuge or consult the technical team for application-specific recommendations. DCMT 11T308 AH725 Tungaloy turning insert — PVD-coated carbide, 55° rhombic geometry DCMT11T308 AH725 is an ISO-standard rhombic turning insert designed for external and internal turning, offering a universal, breakage-resistant grade optimised for steel and rostfreier Stahl applications. ISO rhombic insert, 55° cutting geometry PVD-coated carbide grade AH725 Single-sided chipbreaker for stable chips 0.8 mm corner radius for profile control Consistent performance across varied steels The PVD-coated carbide AH725 grade delivers a robust balance between wear resistance and toughness, making it well suited to mixed-production environments. The insert DCMT11T308 combines a 55° cutting geometry with a 0.8 mm corner radius, which together reduce edge chipping and encourage stable machining forces. For operations with frequent material changes, this grade helps maintain cycle times and reduces unplanned tool changes through improved process reliability. Precision geometry for accurate turning results An ISO rhombic shape with a 55° lead angle provides predictable cutting engagement and favourable chip flow, while the 0.8 mm corner radius supports repeatable profile accuracy on turned features. The moderate relief angle and standardised dimensions enable straightforward programming and predictable toolpath behaviour. When form accuracy is critical, the insert’s geometry aids consistent surface finish and dimensional control without extensive setting adjustments. Controlled chip formation and secure clamping The single-sided chipbreaker is designed to manage chip shape for common turning tasks, helping to avoid long, entangling swarf and supporting uninterrupted production. The plate’s hole configuration — a cylindrical hole with a single-sided countersink (40°–60°) — ensures reliable clamping with suitable holders. Compatibility depends on holder shape, clearance angle and tolerance class; selecting the correct seat and clamp prevents vibration and preserves tool life. System view: integration and practical use Consider the insert as part of a system: correct pairing with a matched external holder or boring bar, a suitable underlay/clamping kit and replacement screws secures performance. Smaller tooling setups and applications demanding elevated process security particularly benefit from the universal, breakage-resistant nature of this grade. For typical workflows such as facing, external turning and light internal profiling, the insert offers a pragmatic mix of durability and versatility. For application advice, availability of original TUN6865198 stock or to discuss optimal holder pairings, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical support Technical data Article number: 6865198 Manufacturer SKU: TUN6865198 SKU: 6865198-Tungaloy Model series: ISO turning inserts Material: Carbide Facts Cutting angle: 55° Corner radius: 0.8 mm Relief angle: 7° Plate size: 11 mm Plate thickness: 3.97 mm Hole style: cylindrical hole with one-sided countersink (40°–60°) Grade/coating: AH725 (PVD-coated) Special features Rhombic plate form (ISO geometry) Single-sided chipbreaker Universal, breakage-resistant grade for steel and rostfreier Stahl Suitable for external and internal turning applications Compatibility determined by holder form, clearance angle and tolerance class System components: holder or boring bar, shim/clamping set, spare screws FAQ What materials is this insert best suited for? The DCMT11T308 AH725 insert is optimised for steel and rostfreier Stahl, offering universal performance across a broad range of steels thanks to the AH725 PVD-coated carbide grade. Is the insert suitable for internal turning operations? Yes; the rhombic 55° geometry and the single-sided chipbreaker make it suitable for both external and internal turning, provided a compatible boring bar or holder is used. How does the AH725 grade affect tool life and reliability? AH725 is designed as a breakage-resistant, universal grade that balances wear resistance and toughness, enhancing tool life and maintaining process reliability under variable conditions. What must be checked to ensure proper clamping? Verify holder seat form, clearance angle and tolerance class; the insert’s cylindrical hole with a one-sided countersink requires a matching clamping arrangement to avoid movement and ensure secure fixation. Can this insert be used for small toolholders and high-security processes? Yes; the universal, breakage-resistant properties of the grade make it particularly suitable for smaller tooling setups and applications where process security is a priority. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH725 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that combines reliable wear resistance with stable chip formation; the geometry and secure clamping provide consistent performance in both external and internal turning. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific selection. DCMT 11T308 AH725 – Indexable turning insert for precision turning (Tungaloy) The DCMT 11T308 AH725 is an ISO-standard indexable insert designed for external and internal turning operations, optimised for applications across varying materials and stability demands. PVD-coated carbide AH725 for process security Universal grade for Stahl and rostfreier Stahl Rhombic form DCMT with 7° clearance Cylindrical hole with single-side countersink Consistent performance with a universal PVD-coated grade The PVD-coated carbide AH725 grade is formulated to deliver process security across mixed production runs. As a universal, chip-breakage-resistant grade, it maintains a robust cutting edge when machining both Stahl and rostfreier Stahl, which is particularly valuable where material batches change or where smaller tool geometries demand predictable behaviour. The coating reduces flank wear and supports repeatable cutting conditions, helping to extend tool life and reduce unplanned downtime without sacrificing surface quality. Geometry and clamping that enhance stability and accuracy The rhombic geometry with a 55° approach provides versatility for turning and finishing, while the 7° clearance minimises rubbing during the cut. The 0.8 mm corner radius balances edge strength and the capability to produce tight radii finishes; the 3.97 mm plate thickness contributes to rigidity under moderate cutting forces. The ISO 11T308 designation ensures dimensional compatibility with standard toolholders; the cylindrical hole with single-side countersink (40°–60°) enables secure clamping, stable repeatability and straightforward index changes in production settings. Predictable chip control and improved surface finish Equipped with a single-sided chipbreaker, this insert supports controlled chip formation across typical feed ranges for medium and finishing cuts. Effective chip control reduces interruptions from long or tangled chips, improves process safety, and helps achieve a finer surface finish with fewer rework cycles. The combination of grade and chipbreaker makes the insert suitable for stable cycles where consistent part quality and reduced machine idle time are priorities. System compatibility and practical application guidance The insert is supplied as part of an ISO-based system: indexable insert, compatible external holder or boring bar, appropriate seat/clamping kit and replacement screws for secure mounting. Select the chipbreaker and AH725 grade to match the selected workpiece Stahl or rostfreier Stahl, machining strategy and assembly rigidity. The article is listed under SKU 6864864-Tungaloy and can be referenced when specifying holder interfaces or reordering parts; the combination of geometry, grade and secure clamping supports reliable integration into serial production. For application-specific advice or to procure the DCMT 11T308 AH725 from Tungaloy, contact Metav Werkzeuge for tailored recommendations and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6864864 Manufacturer SKU: TUN6864864 Label: DCMT11T308 AH725 Tungaloy insert Material: carbide Model series: ISO turning indexable inserts Application: Turning Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Size: 11 Clearance angle: 7° Approach angle: 55° ISO code: 11T308 Special features Grade/coating: PVD-coated AH725 Chipbreaker: single-sided Shape: rhombic Hole: cylindrical + single-side countersink (40°–60°) Use: External and internal turning Compatible with: ISO holders, boring bars, clamping kits and spare screws FAQ Which materials is this insert suitable for? The DCMT11T308 AH725 insert from Tungaloy is specified for machining Stahl and rostfreier Stahl, offering a universal solution where material varieties and process reliability are required. How is compatibility with holders determined? Compatibility depends on form, 7° clearance, tolerance class, fixation method, size (11) and plate thickness (3.97 mm); the ISO 11T308 designation facilitates matching to standard turning holders and boring bars. What cutting tasks is the insert intended for? Designed for external and internal turning, the insert performs well in medium to finishing operations when paired with the correct chipbreaker and a stable setup. What advantages does the AH725 grade offer in production? The PVD-coated AH725 grade provides enhanced wear resistance, stable chip formation and improved process security, making it suited to changing material conditions and demanding production requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, the AH725 universal grade and precise geometry for steady process security and consistent surface quality; order the insert directly via Metav Werkzeuge or consult our team for application advice. DCMT 11T308 AH725 ISO turning insert (Turning) — PVD-coated carbide, 0.8 mm radius, Tungaloy The DCMT11T308 AH725 is an ISO-standard indexable turning insert designed for general external and internal turning, offering a universal, fracture-resistant grade for applications involving Stahl and rostfreier Stahl. PVD-coated carbide for consistent edge life Universal AH725 grade for Stahl and rostfreier Stahl 0.8 mm corner radius for versatile finishing ISO DCMT shape with cylindrical hole and countersink Predictable cutting performance for mixed materials The insert delivers reliable cutting behaviour thanks to its PVD-coated carbide substrate and the AH725 grade, which is engineered for universal use across Stahl and rostfreier Stahl. This combination supports stable chip formation and reduces unpredictable edge failure, improving overall process security. For operations that shift between different workpiece materials or require smaller tooling, the consistent wear behaviour minimises the need for frequent grade changes, enhancing productivity on batch or mixed-production runs. Compatibility and quick changeover for efficient tooling Designed to the ISO geometry, the indexable plate ensures fast, repeatable mounting in standard DCMT holders. The cylindrical hole with a single-sided countersink (40°–60°) and the plate thickness of 3.97 mm contribute to secure clamping and repeatable seating, shortening setup time and reducing rework. Clearances and tolerances matched to the ISO series lower the risk of misalignment, while the robust form factor supports both external and internal turning tasks with reliable seating and tool life. Improved uptime through controlled chip shaping and edge geometry The integrated one-sided chipbreaker and the 0.8 mm corner radius reduce vibration and support chip control across finishing and light turning passes. The modest corner radius gives a balance between strength and surface finish, enabling consistent dimensional results with fewer insert changes. By selecting a universal AH725 sort, tool inventory is simplified and changeover frequency is reduced, contributing to measurable savings in setup time and tooling logistics. Consistent surface quality and process stability The rhombic plate form with a 55° included angle and a 7° relief angle provides steady cutting forces and favourable approach geometry for finishing operations. The plate geometry supports predictable tool deflection and surface integrity, which is particularly important in series production where repeatability matters. Backed by the Tungaloy design philosophy, the insert combines practical geometry with modern coating technology to deliver consistent results on a wide range of turning applications. Contact Metav Werkzeuge today for tailored advice on applying this Tungaloy AH725 turning insert in your turning centres or to place an order; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6856781 Manufacturer SKU: TUN6856781 Model series: ISO turning inserts Designation: DCMT11T308 AH725 Material: carbide Core specifications Corner radius: 0.8 mm Included angle: 55° Relief angle: 7° Thickness: 3.97 mm Plate size: 11 Special features PVD-coated carbide (AH725) Universal, fracture-resistant grade for Stahl and rostfreier Stahl Rhombic plate form One-sided chipbreaker With hole: cylindrical hole + single-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert suitable for? The DCMT11T308 AH725 insert is specified for machining Stahl and rostfreier Stahl, offering a universal performance profile for mixed-material production. Which holder types are compatible with this plate? Compatibility is determined by the DCMT form, the 7° relief, plate thickness (3.97 mm) and the ISO dimensions; matching DCMT ISO holders and clamping screws will secure the plate correctly. How does the AH725 grade affect tool life? The AH725 PVD-coated grade provides stable wear characteristics and fracture resistance, which supports longer edge life and improved process security in varying machining conditions. Can the insert be used for finishing and light turning? Yes; the 0.8 mm corner radius and 55° rhombic geometry are suited to finishing and light turning where surface quality and dimensional repeatability are required. What chip control can be expected with this geometry? The one-sided chipbreaker is tuned to produce controllable chips in common turning operations, reducing the risk of chip entanglement and improving surface consistency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH8005 Wendeplatten - Tungaloy
Benefit from the PVD-coated AH8005 wear resistance combined with ISO compatibility and a precise 0.8 mm nose radius for dependable turning of heat-resistant alloys and hard materials. Order the insert directly via Metav Werkzeuge or consult our technical advisors for material- and holder-specific recommendations. DCMT11T308 AH8005 – Indexable turning insert for ISO turning, PVD-coated carbide, 0.8 mm nose radius, by Tungaloy The DCMT11T308 AH8005 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for heat-resistant alloys and hard materials with a stable machining setup ISO-form DCMT 11T308, rhombic geometry PVD-coated carbide AH8005 for wear resistance 0.8 mm nose radius for fine profile accuracy Compatible with ISO turning holders; cylindrical hole + countersink High-performance cutting for heat-resistant and hard materials The combination of a PVD-coated AH8005 grade and a carbide substrate delivers enhanced wear resistance and thermal stability during continuous turning operations. This grade is formulated for machining heat-resistant alloys and other demanding materials where edge durability directly affects productivity. With a rhombic form and a controlled chipbreaker, the insert supports stable chip formation and consistent surface finish, reducing the need for frequent tool changes and therefore improving overall process efficiency. The coating reduces flank wear and extends service intervals under challenging cutting conditions. Precision fit and reliable clamping reduce rework Compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s 7° clearance angle and ISO 11T308 geometry ensure a predictable seating in standard external holders, while the cylindrical hole with single-sided countersink (40°–60°) provides secure fixation and repeatable positioning. Correct matching of holder and insert minimises runout and vibration, leading to improved dimensional accuracy and fewer rejected parts. The controlled geometry also supports reliable coolant flow and chip control in many shop-floor setups. Practical selection and machining recommendations for stable results The one-sided chipbreaker and a 0.8 mm nose radius make this plate suitable for finishing to medium-light roughing passes where profile accuracy is required. For best results, select a holder and mounting combination that match the insert’s size (11 mm) and thickness (3.97 mm) and adapt cutting parameters to workpiece material and machine rigidity. The ISO-standard design simplifies replacement and inventory management, while the PVD wear layer offers balanced performance across a wide range of cutting speeds. If uncertainty remains about the ideal grade or chipbreaker for a specific job, technical consultation is advised to optimise cycle times and tool life. Choose the Tungaloy AH8005 DCMT11T308 when durability and consistent surface quality matter — contact Metav Werkzeuge for fast, knowledgeable advice and tailored supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6747768 Manufacturer SKU: TUN6747768 SKU: 6747768-Tungaloy Manufacturer: Tungaloy Key dimensions Nose radius: 0.8 mm Plate size: 11 mm Thickness: 3.97 mm Clearance angle: 7° Geometry angle: 55° Features and materials Material: carbide Coating: PVD (AH8005) Plate shape: rhombic Chipbreaker: one-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: turning Model series: ISO turning indexable inserts FAQ How does the AH8005 coating improve performance during turning? The AH8005 PVD coating on the DCMT11T308 increases wear resistance and heat tolerance, which prolongs tool life when turning heat-resistant alloys and high-strength materials. Which holder characteristics must be matched to this insert? Compatibility is determined by the insert form, clearance angle (7°), tolerance class, fastening method, size (11 mm) and thickness (3.97 mm); matching these parameters ensures proper seating and repeatable machining performance. Is the insert suitable for both external and internal turning? Yes, the ISO 11T308 geometry and rhombic shape make the insert suitable for both external and internal turning tasks when used with a compatible holder. What role does the one-sided chipbreaker play in cutting results? The one-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of built-up edge during stable cutting conditions. Can this insert be used on a variety of workpiece materials? The AH8005 grade is optimised for heat-resistant alloys and hard materials; it also performs well across a range of steels and alloyed materials when cutting parameters are adapted to the workpiece and machine rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 AH8005 Wendeplatten - Tungaloy
Combining reliable wear resistance, precise geometry and ISO compatibility, this insert delivers consistent cutting performance for demanding turning tasks; the PVD-coated AH8005 grade extends tool life in heat-resistant alloys while the 0.8 mm corner radius supports fine surface finishes. Order the DCMT11T308 AH8005 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 11T308 AH8005 ISO turning insert — rhombic 55° for turning (Tungaloy) The DCMT11T308 AH8005 is an ISO-standard indexable insert designed for external and internal turning of hard and heat-resistant materials, offering high wear resistance and stable cutting under robust conditions. ISO rhombic insert, 55° cutting angle PVD-coated carbide, AH8005 grade 0.8 mm corner radius for finishing Cylindrical hole with 40°–60° countersink Proven grade and coating for extended tool life The PVD-coated surface combined with a carbide substrate in the AH8005 grade provides enhanced wear resistance when machining heat-resistant alloys and other hard materials. This specification reduces flank wear and crater formation during prolonged cycles, which translates to fewer indexings and longer usable life per edge. The material and coating pairing is optimised for stable, repeatable cutting under moderate to high cutting forces, helping to keep process windows predictable in serial production. Geometry and clamping for secure, accurate cuts Adherence to ISO-standard form and dimensions ensures straightforward compatibility with appropriate clamping systems; the rhombic shape and 55° approach angle favour versatile use in turning operations, balancing strength and accessibility to profiles. The modest 0.8 mm corner radius supports fine surface finishes while the 7° relief aids chip evacuation and reduces the risk of rubbing. The insert’s 3.97 mm thickness and the cylindrical hole with a single-sided countersink (40°–60°) provide reliable mechanical engagement, lowering the likelihood of movement under load and contributing to consistent part quality. Practical system integration and recommended use As part of a complete tool system, this indexable component works with a suitable external holder, shims and clamping set; replacement screws and correct tolerance class ensure repeatable seating. The single-sided one-sided chipbreaker supports controlled chip formation for stable machining and easier handling of cut material. For best results, match the chipbreaker and grade to the workpiece and machining conditions: the combination promotes efficient metal removal, reduced downtime and predictable tool-change intervals, which benefits throughput and process stability. For supply or technical advice on the Tungaloy DCMT11T308 AH8005 insert, contact Metav Werkzeuge for tailored tooling recommendations and rapid availability via info@metav-werkzeuge.com or +49 2822 7131930 — technical consultation and order support are available. Technical data Article number: 6747772 SKU: 6747772-Tungaloy Manufacturer SKU: TUN6747772 Manufacturer: Tungaloy Facts Shape: rhombic, 55° Corner radius: 0.8 mm Relief angle: 7° Thickness: 3.97 mm Size: 11 Special features PVD-coated carbide Grade AH8005 One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) ISO-standard turning insert for external and internal turning System components: holder, shim, clamping set, replacement screws Suitable for hard materials and heat-resistant alloys FAQ What materials is this insert suitable for? The DCMT11T308 AH8005 insert is intended for hard materials and heat-resistant alloys, where the AH8005 grade and PVD coating provide improved wear resistance. How does the insert secure to the holder? Clamping relies on the insert’s cylindrical hole with a single-sided countersink (40°–60°) and the correct shim and screw set; the geometry and tolerance class ensure accurate seating. What surface finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius delivers a fine finish in finishing operations while maintaining robustness for light profile turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com