DCMT 11T308 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T5115, proven edge stability and ISO conformity for reliable cast-iron turning; the insert delivers efficient chip control with a 0.8 mm nose radius and a 7° relief angle. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. DCMT11T308 11T308 T5115 Indexable Turning Insert – Tungaloy (Turning) A DCMT11T308 indexable turning insert engineered for external and internal turning, optimised for cast-iron applications and ISO-holder compatibility. CVD-coated carbide grade T5115 ISO rhombic insert DCMT 11T308 0.8 mm nose radius for precise turning Single-sided chipbreaker with countersunk hole Consistent, productive performance for cast-iron turning The DCMT11T308 is specified as a universal grade for cast iron, combining a CVD-coated surface with a wear-resistant carbide substrate to extend tool life and reduce downtime. This balanced grade offers a compromise between flank-wear resistance and edge stability, which translates into predictable tool life and less frequent tool changes. The result is improved machine utilisation and a smoother production flow when machining cast components where repeatable results are critical. Designed for precise geometry and ISO compatibility Compatibility is defined by form, relief angle, tolerance class, fastening, size and thickness; this insert follows ISO standards for rhombic turning plates. The plate geometry features a rhombic shape with an included angle of 55°, a 0.8 mm nose radius and a relief angle of 7°, all of which support controlled cutting forces and reliable engagement in both external and internal turning operations. These measurable parameters simplify holder selection and ensure repeatable set-up across different machines and fixtures. Enhanced chip control and edge stability for safer cycles The single-sided chipbreaker is matched to the T5115 grade and the insert geometry to promote consistent chip formation and evacuation when turning cast iron. Efficient chip control reduces rework and tool interference, while a CVD coating improves thermal stability at elevated cutting speeds. Together, these features lower the risk of edge chipping and allow for more stable cycles, which is especially beneficial in batch production and automated turning environments. Practical integration and handling in the workshop The insert is supplied with a cylindrical hole plus single-side countersink (40°–60°) for secure fastening to suitable holders or boring bars. Plate thickness is 3.97 mm and the designation complies with the ISO series of indexable turning plates, aiding inventory management and replacement procedures. When selecting a holder, match form, clearance angles and tolerance class to maintain clamping reliability. If uncertainty remains about holder compatibility or cutting parameters, technical consultation can help adapt cutting data to the machining centre and material batch. For process assurance with Tungaloy quality, contact Metav Werkzeuge for availability and tailored holder recommendations: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6864549-Tungaloy Manufacturer article number: 6864549 Manufacturer SKU: TUN6864549 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Nose radius: 0.8 mm Relief angle: 7° Insert angle: 55° Plate thickness: 3.97 mm Plate size: 11 Special features Coating: CVD-coated Grade: T5115 Shape: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert suitable for? The T5115 grade and CVD-coated carbide construction make the DCMT11T308 particularly suitable for machining cast iron, offering a balance of wear resistance and edge stability. How does the hole and countersink affect clamping? The cylindrical hole with a single-side countersink (40°–60°) ensures secure fastening in compatible holders and supports repeatable positioning for indexable turning operations. Which negative effects does the T5115 grade mitigate? The combination of the T5115 grade and a robust chipformer reduces edge chipping and improves thermal stability during medium to high cutting speeds on cast-iron workpieces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T515 Wendeplatten - Tungaloy
Combine economical cast-iron performance, robust CVD-coated carbide and precise 55° geometry for consistent turning results; the combination supports stable chip formation and predictable tool life. Order the DCMT11T308 T515 insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T308 T515 ISO rhombic turning insert for turning — Tungaloy The DCMT11T308 T515 is an ISO-format rhombic insert tailored for economical external and internal turning of cast iron, offering a balanced mix of wear resistance and chip control. CVD-coated carbide grade T515 Economical cast iron machining Rhombic 55° cutting geometry Single-sided chipbreaker with drilled hole Consistent chip control for productive cast-iron turning The CVD-coated carbide grade T515 provides a wear-resistant surface that helps maintain cutting-edge integrity during sustained production runs. Combined with the single-sided chipbreaker, this geometry promotes stable chip formation, which reduces interruptions and the need for manual chip clearing. For workshops seeking to increase throughput while keeping tooling costs in check, the insert’s coating and substrate chemistry deliver economical machining without sacrificing process stability. The result is fewer tool changes and a more predictable tool-life profile. Proven geometry and secure clamping for predictable results As an ISO rhombic insert with a 55° approach, the geometry balances cutting forces and surface finish expectations in typical turning setups. The specified clearance angle of 7° and corner radius of 0.8 mm contribute to a compromise between edge strength and achievable surface quality. The insert is supplied with a cylindrical hole and one-sided countersink (40°–60°) for secure fastening; compatibility with a holder depends on form, clearance angle, tolerance class, fastening style, size and thickness. The 3.97 mm plate thickness and size 11 designation ensure compatibility with standard external holders designed for ISO indexes. Application guidance for reliable process integration Designed primarily for cast iron workpieces, the grade suits both continuous and intermittent cuts when the correct chipbreaker and clamping stability are chosen. Select the chipbreaker and cutting parameters according to component rigidity and interruption frequency: a stable setup enables higher feed rates and more aggressive material removal, while less rigid conditions benefit from reduced depths of cut. The insert’s characteristics support production-focused strategies where repeatability and throughput are priorities, providing a practical path to improved component output and lower cycle-time variability. Simple system assembly and operational benefits The insert forms part of a straightforward system: an ISO turning plate, compatible external holder or boring bar, a shim/clamping set and replacement screws. Proper assembly and torqueing of the clamping components are essential to exploit the T515 grade’s potential and avoid premature edge failure. For machine shops standardising on reliable, readily available inserts, the combination of established ISO geometry and a coated carbide substrate simplifies inventory management and contributes to consistent process results across batches. For personalised availability and application advice on the Tungaloy DCMT11T308 T515 insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for rapid, production-focused guidance Technical data Article number: 6740251 SKU: 6740251-Tungaloy Manufacturer SKU: TUN6740251 Item label: DCMT11T308 T515 Tungaloy insert Model series: ISO turning indexable inserts Material: Carbide Core specifications Corner radius: 0.8 mm Approach angle: 55° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 11 Hole style: cylindrical hole with one-sided countersink (40°–60°) Special features CVD-coated carbide grade T515 Single-sided chipbreaker ISO designation DCMT11T308 Rhombic plate form Application: Turning (external and internal) Optimised for cast iron machining FAQ Which materials is this insert suitable for? The DCMT11T308 T515 insert is optimised for the economical machining of cast iron; the CVD-coated carbide substrate ensures wear resistance appropriate for grey and nodular cast iron machining. How is holder compatibility determined for this type of insert? Compatibility depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic 55° geometry and the specified hole/countersink require a matching ISO-style holder. What advantage does the T515 grade offer? Grade T515 is a CVD-coated carbide developed for economic cast-iron operations, providing a good balance between cutting-edge wear resistance and cost-efficiency in series production. Can this insert be used for interrupted cuts? Yes; interrupted cuts are possible but it is important to select the appropriate chipbreaker and ensure sufficient clamping stability to protect the cutting edge from shock loads. Why does corner radius matter and what does 0.8 mm deliver? A 0.8 mm corner radius increases edge robustness compared with smaller radii, improving resistance to edge chipping while offering a reasonable surface finish for general turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, precise chip control and ISO compatibility for reliable turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. DCMT 11T308 T6215 – Indexable turning insert for Turning, Tungaloy A DCMT 11T308 T6215 indexable turning insert designed for ISO-compliant external and internal turning, optimised for stable to lightly interrupted cuts. CVD-coated cemented carbide grade T6215 Optimised for rostfreier Stahl machining Rhombic 11 mm plate with 0.8 mm radius Cylindrical hole with 40°–60° countersink Consistent tool life through advanced coating and grade selection The combination of a CVD-coated surface and a cemented carbide substrate in grade T6215 delivers extended wear resistance and predictable flank performance, which reduces the need for frequent index changes. This results in fewer tool changes per shift and a more stable production flow when machining rostfreier Stahl. The coating improves resistance to abrasive and adhesive wear, supporting longer cutting intervals under stable setups and light interruptions. As a result, process reliability and throughput benefit directly from the material and coating choice. Secure clamping and straightforward indexability for efficient changeover The insert features a rhombic geometry and a cylindrical hole with a one-sided countersink (40°–60°), designed for reliable seating in standard ISO-compatible holders. With a plate thickness of 3.97 mm and a 7° relief angle, the component offers consistent seating and repeatable positioning. This geometry minimises micro-movement during cutting and simplifies indexable replacement, reducing machine downtime and enabling predictable part tolerances over repeated tool indices. Improved chip control tailored to rostfreier Stahl turning A single-sided chipbreaker geometry provides controlled chip formation on the leading edge and supports stable swarf evacuation when turning rostfreier Stahl. The combination of chipplate design and the 0.8 mm corner radius balances edge strength with surface finish, helping to avoid built-up edge and promoting smoother feeds. Where surface integrity is important, this profile helps achieve consistent finishes while maintaining secure edge life under moderate cutting parameters. Application guidance and holder compatibility for reliable results This insert is supplied in the ISO turning indexable insert family and is intended for external and internal turning tasks under stable to lightly interrupted conditions. Compatibility with a chosen holder depends on seat form, relief angle, tolerance class, attachment method, size and thickness; ensure the selected holder matches the ISO form and the 11T308 designation. For mixed-material shops, the grade is primarily aimed at rostfreier Stahl operations; alternative grades should be considered for cast iron or high-speed aluminium work. For tailored recommendations on compatible holders, cutting data or to order the Tungaloy DCMT 11T308 T6215 insert, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and rapid delivery Technical Data Article number: 6945246-Tungaloy Manufacturer SKU: TUN6945246 Manufacturer article number: 6945246 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Coating/grade: T6215 (CVD-coated) Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 11 mm Relief angle: 7° Included angle: 55° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic plate form Single-sided chipbreaker ISO-compliant turning insert Intended for external and internal turning Suited for rostfreier Stahl under stable to lightly interrupted conditions Compatibility depends on holder form, tolerance and fastening FAQ What materials is this insert best suited for? The DCMT 11T308 T6215 insert is optimised for machining rostfreier Stahl, using its CVD-coated cemented carbide composition to resist wear during turning operations. How does the T6215 grade affect tool life? The T6215 CVD coating improves abrasive and adhesive wear resistance, so the insert maintains edge integrity longer and delivers more consistent tool life in rostfreier Stahl turning. Which holders are compatible with this insert? Compatibility relies on ISO seat form, relief angle and plate size; select an ISO-compatible external holder that matches the 11 mm rhombic plate and the specified 7° relief. What cutting geometry helps achieve good surface finish? A 0.8 mm corner radius combined with the single-sided chipbreaker yields a balance between edge strength and surface quality, supporting smoother feeds and reduced built-up edge. How to identify the correct article for ordering? Use the SKU 6945246-Tungaloy or the manufacturer article number 6945246 when ordering the DCMT 11T308 T6215 indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T6215 Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide grade T6215 and a 55° rhomboid geometry delivers reliable edge life and consistent surface finish in stainless steel turning; the 0.8 mm corner radius balances finishing capability with light roughing performance. Order this insert directly via Metav Werkzeuge or consult the specialists for holder compatibility and cutting‑condition recommendations. DCMT 11T308 T6215 DCMT11T308 indexable turning insert for turning — Tungaloy The DCMT11T308 T6215 is an ISO‑standard rhomboid indexable insert designed for turning operations, optimised for machining stainless steels under stable to mildly interrupted cutting conditions. CVD‑coated carbide T6215 for wear resistance 55° rhomboid geometry for versatile turning 0.8 mm corner radius for finishing and light roughing Central hole with countersink for secure clamping Consistent productivity through wear‑resistant grade and coating The insert’s CVD‑coated carbide construction ensures sustained cutting performance when machining stainless steels, where heat and work‑hardening can otherwise shorten tool life. The T6215 grade is formulated to resist abrasive and adhesive wear under stable to slightly interrupted cuts, which means longer intervals between index changes and fewer unscheduled tool exchanges. This translates into measurable productivity gains and more consistent component quality when facing typical turning tasks. Geometry engineered for precision and secure mounting The 55° rhomboid geometry with a 0.8 mm corner radius provides a balanced profile for external and internal turning, offering a compromise between edge strength and surface finish. The single‑sided chipbreaker supports controlled chip formation for many stainless steel alloys, while the central hole with a cylindrical bore plus a one‑sided countersink (40°–60°) enables secure clamping in compatible holders. The modest 7° clearance angle and plate thickness 3.97 mm contribute to stable seating and repeatable tool positioning in ISO‑standard toolholders. Material and coating advantages explained for reliable results A CVD (chemical vapour deposition) coating forms a hard, thermally stable layer on the carbide substrate, improving resistance to oxidation and flank wear during elevated cutting temperatures. For stainless steel turning, this means less tendency for built‑up edge and improved surface integrity on the workpiece. The combination of grade and coating offers a practical solution where consistent edge retention is required, supporting a predictable machining cycle and reducing process variation. System compatibility and recommended setup for turning applications The insert forms part of an ISO plate system: the complete setup requires a matching external holder or boring bar, a supporting shim and clamping set, and the correct fastening screw. Compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness; selecting a holder that matches the DCMT11T308 geometry and the insert’s clamping style is essential for vibration control and repeatable performance. Opt for the chipbreaker and grade that suit the specific stainless steel grade and the stability of the machining setup to achieve the targeted balance of tool life and surface finish. For application advice on the Tungaloy CVD‑coated indexable insert or to confirm holder compatibility, contact Metav Werkzeuge – email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6945259 Manufacturer SKU: TUN6945259 SKU: 6945259-Tungaloy Designation: DCMT11T308 Facts Corner radius: 0.8 mm Included angle: 55° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 11 Special features Rhomboid plate form Central hole with cylindrical bore and one‑sided countersink (40°–60°) Single‑sided chipbreaker CVD‑coated carbide grade T6215 ISO‑standard indexable turning insert Intended application: turning (external and internal) Suitable for stainless steels under stable to mildly interrupted cuts FAQ What materials is this insert designed for? The DCMT11T308 T6215 insert is optimised for stainless steel machining; the CVD‑coated carbide formulation provides wear resistance suitable for stable to slightly interrupted turning operations. Which insert geometry does the DCMT11T308 use and what is its benefit? The insert features a 55° rhomboid geometry with a 0.8 mm corner radius, combining versatility for external and internal turning with a balance between edge strength and surface finish. How is the insert clamped in the toolholder? Clamping is achieved via the central hole with a cylindrical bore plus a one‑sided countersink; this design ensures secure seating when matched with the appropriate holder and clamping kit. Is this insert compatible with ISO‑standard toolholders? Yes, the DCMT11T308 follows ISO plate standards; compatibility depends on matching the insert form, thickness, size and fastening style to the chosen holder. What cutting conditions suit the T6215 grade? The T6215 grade is intended for wear resistance in stainless steel under stable to mildly interrupted conditions, offering extended edge life and consistent surface integrity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T308 T6215 Wendeplatten - Tungaloy
DCMT11T308 T6215 combines a wear-resistant CVD-coated carbide grade with a 0.8 mm corner radius and a 55° rhombic geometry to deliver consistent chip control and long tool life in stainless steel turning; order via Metav Werkzeuge or consult their specialists for holder matching and cutting data. DCMT11T308 T6215 ISO turning insert for stainless steel by Tungaloy — CVD-coated carbide, 55° rhombic A DCMT11T308 T6215 ISO rhombic insert engineered for reliable external and internal turning of stainless steel under stable to slightly interrupted conditions DCMT11T308 T6215 ISO rhombic insert, 55° cutting angle CVD-coated carbide grade T6215 for stainless steel 0.8 mm corner radius, single-sided chipbreaker Cylindrical hole with single countersink 40°–60° Consistent wear resistance for demanding stainless steel turning The combination of a CVD-coated carbide substrate and the T6215 grade provides enhanced resistance to abrasive wear and built-up edge when machining austenitic and other stainless steels. A chemical vapour deposition (CVD) coating forms a hard, thermally stable layer that reduces flank wear and maintains cutting-edge integrity over longer tool life. The modest 0.8 mm corner radius delivers a balance between edge strength and surface finish, while the single-sided chip control geometry supports steady chip formation under stable conditions. Secure mounting and ISO compatibility for predictable clamping Designed to the ISO turning insert family, the plate’s form, 7° clearance angle, tolerance class, fastening style and dimensions determine holder compatibility. The 11 size and 3.97 mm plate thickness create a rigid clamping interface; the cylindrical hole with a single-side countersink (40°–60°) ensures repeatable seating and secure fastening in compatible holders. These measurable parameters simplify holder selection and reduce set-up variability, supporting consistent process results on production lines. Productivity and application guidance for shop-floor performance For external and internal turning operations the single-sided chipbreaker and the grade selection favour stable to lightly interrupted cuts, promoting surface quality and reduced tool changes. The 55° rhombic geometry supports turning where access and reach are relevant, while the T6215 composition aims to extend in-cut life in stainless applications. Practical selection of chipbreaker and cutting data according to component rigidity and machine stability will result in improved cycle times and fewer unplanned tool interventions. For application-specific cutting data or assistance with holder selection for Tungaloy T6215 inserts, contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to ensure optimum machining results Technical Data Article number: 6876420 SKU: 6876420-Tungaloy Manufacturer SKU: TUN6876420 Model series: ISO turning inserts Designation: DCMT11T308 Facts Corner radius: 0.8 mm Thickness: 3.97 mm Size: 11 Clearance angle: 7° Cutting angle: 55° Special features Material: CVD-coated carbide (T6215) Plate form: rhombic Hole: cylindrical with single-side countersink 40°–60° Chipbreaker: single-sided Application: external and internal turning of stainless steel under stable to slightly interrupted conditions Compatibility: ISO holders — fit depends on shape, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The DCMT11T308 T6215 insert is optimised for stainless steel machining; the CVD-coated carbide composition provides improved wear resistance when turning austenitic and similar stainless grades. Is the insert compatible with standard ISO holders? Compatibility follows ISO standards for insert form and depends on holder shape, tolerance class, clearance angle, fastening method, plate size and thickness; the DCMT11T308 designation aligns with common ISO rhombic holders. What is the corner radius and how does it influence results? The corner radius is 0.8 mm; this radius strengthens the cutting edge for interrupted conditions while still enabling good surface finish and predictable chip formation. How is the insert secured in the holder? The insert includes a cylindrical hole with a single-side countersink (40°–60°) to ensure repeatable seating and secure clamping when used with the appropriate ISO-compatible screw or clamp system. Which operations are recommended for this insert? Primary recommendations are external and internal turning; select the single-sided chipbreaker and cutting data according to component rigidity and machining stability for best performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide grade T6215, a 0.8 mm corner radius and the ISO rhombic form for reliable edge life and dependable stainless steel turning; order the DCMT11T308 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T308 T6215 DCMT indexable insert for turning — Tungaloy, ISO 11T308, 0.8 mm radius The DCMT11T308 T6215 is an ISO rhombic indexable insert engineered for external and internal turning of stainless steel under stable to lightly interrupted conditions, combining a wear‑resistant coating with a geometry optimised for repeatable surface quality. CVD‑coated carbide grade T6215 for wear resistance ISO rhombic DCMT11T308 with 7° clearance 0.8 mm corner radius for reliable edge strength Cylindrical hole with single‑sided countersink (40°–60°) Longer tool life for demanding stainless‑steel turning The insert’s CVD‑coated carbide substrate provides enhanced wear resistance and thermal stability, which translates into longer tool life during continuous or slightly interrupted cuts. This coating reduces flank wear in the contact zone and helps maintain cutting edge integrity when machining stainless steel, so fewer indexings and tool changes are required. The result is improved process efficiency and reduced machine downtime, which supports higher overall productivity in batch runs and serial machining. Geometry designed for consistent chip formation and surface finish A rhombic ISO form with a 7° clearance angle and a 0.8 mm corner radius balances edge strength and cutting engagement to produce stable chip formation and consistent surface results. The single‑sided chipbreaker controls chip flow for many common turning tasks, which simplifies process set‑up and helps achieve repeatable part quality. Because the geometry is ISO‑compliant, the insert’s cutting behaviour is predictable across compatible holders, assisting in process planning and tool qualification. Easy mounting and ISO compatibility for system reliability Mounting the plate is straightforward thanks to the cylindrical hole with single‑sided countersink (40°–60°) and a standard plate thickness of 3.97 mm, guaranteeing secure clamping in matching toolholders. ISO standardisation of the insert designation and form ensures compatibility is determined by holder shape, clearance angle, tolerance class, attachment method, size and thickness. This reduces the risk of fitment errors and makes the insert suitable for rapid replacement in established tool systems. Practical application advice for shops and production lines Best suited for external and internal turning operations, this indexable plate performs particularly well in stable setups or where only light interruptions occur. Selecting the correct chipbreaker and matching the T6215 grade to the workpiece material and clamping rigidity will maximise the advantage of the coated carbide: improved process stability, consistent component finish and predictable tool life. For customers aiming to raise productivity while maintaining surface quality, this solution offers a practical balance between performance and operational robustness. Contact Metav Werkzeuge for assistance choosing the optimal holder and chipbreaker for the DCMT11T308 T6215 insert and arrange supply through our specialists. Technical Data Article number: 6876416 Manufacturer SKU: TUN6876416 SKU: 6876416-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Core data Corner radius: 0.8 mm Clearance angle: 7° Insert thickness: 3.97 mm Inscribed circle / size: 11 mm Wedge angle: 55° Special features Grade / coating: T6215 (CVD‑coated) Chipbreaker: single‑sided Hole style: cylindrical hole + single‑sided countersink (40°–60°) ISO designation: DCMT11T308 Plate form: rhombic Application: turning FAQ What materials is this insert optimised for? The DCMT11T308 T6215 insert is optimised for machining stainless steel under stable to lightly interrupted cutting conditions; the T6215 grade and CVD coating improve wear resistance on such alloys. Which holders are compatible with the insert? Compatibility is determined by ISO form, clearance angle, tolerance class, attachment method, size and thickness; the DCMT11T308 matches holders designed for ISO rhombic DCMT inserts and secure clamping with a cylindrical hole and countersink. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and distributes cutting forces, reducing the likelihood of chipping while maintaining acceptable surface finish for general turning tasks. Is the insert suitable for interrupted cuts? The plate is suitable for stable to lightly interrupted cuts; for heavily interrupted machining, consider assessment of setup rigidity and alternative grades or geometries. How can the DCMT11T308 be identified for reordering? Order using the manufacturer article number 6876416 or the SKU 6876416‑Tungaloy to ensure the correct Tungaloy DCMT11T308 T6215 insert is supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO-compliant geometry and a precise 0.8 mm corner radius for steady productivity in turning rostfreier Stahl; order or request application advice via Metav Werkzeuge for tailored recommendations. DCMT 11T308 T6215 Tungaloy turning insert — CVD-coated carbide, 0.8 mm corner radius A DCMT11T308 T6215 indexable turning insert designed for ISO‑compliant external and internal turning, optimised for rostfreier Stahl under stable to lightly interrupted cutting conditions CVD-coated carbide T6215 for rostfreier Stahl ISO‑standard rhombic DCMT 11T308 geometry 0.8 mm corner radius for accurate profile control Cylindrical hole with single‑side countersink (40°–60°) Proven wear resistance for longer machining cycles The CVD-coated cutting grade T6215 is formulated to deliver consistent performance when machining rostfreier Stahl. The combination of a hard coating on a tough carbide substrate reduces flank and crater wear under stable cutting, which in turn extends tool life and reduces interruption for insert changes. This means fewer tool changes per batch and improved uptime on repetitive turning tasks, supporting a more predictable production flow. Predictable clamping and easy insert selection Designed as part of the ISO series, the rhombic geometry ensures interchangeability across compatible holders. Compatibility depends on the insert form, 7° clearance angle, tolerance class, fastening method, nominal size and thickness; the insert’s rhombic shape and mounting hole specification simplify selection for existing tool systems. Specifying ISO geometry helps maintain repeatable set‑ups and reduces the need for bespoke holders, lowering fixture complexity and set‑up time. Consistent surface finish and dimensional control The modest 0.8 mm corner radius supports precise profiling and controlled cutting engagement, delivering improved surface quality on external and internal diameters without sacrificing edge strength. The single‑sided chipbreaker and the cylindrical hole with a single‑side countersink (40°–60°) aid chip control and stable seating in the clamp assembly, which benefits component quality and reduces secondary finishing. For stable to slightly interrupted cuts, this geometry balances edge robustness with the ability to achieve fine finishes. Contact Metav Werkzeuge for application advice, availability of the DCMT11T308 T6215 insert and recommendations for the optimal holder and cutting parameters Technical data Article number: 6876439 Manufacturer SKU: TUN6876439 Our SKU: 6876439-Tungaloy Designation: DCMT11T308 T6215 Material: carbide Coating: CVD Dimensions and measurable data Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 55° Design and special features ISO turning indexable insert series Rhombic insert shape Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Application: external and internal turning System components: holder, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The DCMT11T308 T6215 insert is specified for turning rostfreier Stahl and performs best under stable to lightly interrupted cutting conditions. How does the T6215 grade benefit production runs? The T6215 CVD-coated grade offers high wear resistance on rostfreier Stahl, which extends insert life and reduces downtime in repetitive turning operations. Which holder features must match for correct compatibility? Compatibility requires matching the insert form, clearance angle (7°), fastening method, size (11 mm) and thickness (3.97 mm) to the chosen holder and clamp system. Does the insert support good chip control? Yes, the single‑sided chipbreaker together with the cylindrical hole and single‑side countersink help stabilise chip flow and seating, improving process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9215 Wendeplatten - Tungaloy
Combining the CVD-coated T9215 grade with a 0.8 mm corner radius delivers high wear resistance and reliable fracture safety for productive medium-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. DCMT 11T308 T9215 — turning insert by Tungaloy (CVD‑coated carbide, rhombic 11 mm) DCMT11T308 T9215 Tungaloy insert is an ISO‑standard rhombic turning insert designed for external and internal turning operations in medium‑steel machining. DCMT11T308 rhombic insert, 11 mm CVD‑coated carbide grade T9215 0.8 mm corner radius, single‑sided chipbreaker Cylindrical hole with 40°–60° countersink Consistent productivity for medium‑steel turning The combination of a CVD‑coated surface and a wear‑resistant carbide substrate (grade T9215) provides a robust solution for continuous to slightly interrupted cuts in medium‑hard steels. The coating increases resistance to abrasive wear while the substrate preserves fracture toughness, which together reduce insert change frequency and help maintain consistent cycle times. For workshops focused on throughput and repeatability, this choice supports higher machining rates without compromising edge life. Precise fit and standardised compatibility Compatibility with toolholders is determined by ISO form, the relief or free angle (7°), tolerance class, mounting design, size and thickness. The rhombic shape and the ISO designation ensure interchangeability across standard holders when the correct shape and clamping features are matched. Using an insert that conforms to established ISO profiles simplifies inventory and reduces setup time, while a proper fit keeps cutting geometry stable and repeatable for predictable surface finish and dimensional accuracy. Improved chip control and edge security The single‑sided chipbreaker and the modest corner radius (0.8 mm) balance chip formation and edge strength, which is especially valuable when machining long bars or components requiring continuous operation. Controlled chip flow lowers the risk of re‑cutting and reduces the need for complex chip management systems. The insert’s design supports safe evacuation of chips and reliable edge behaviour under steady cutting conditions, helping to protect both the workpiece and the cutting edge against unexpected forces. System approach and practical handling A complete cutting system comprises the insert, a matching holder or boring bar, an appropriate shim or clamp set, and replacement fixing screws; selecting the correct chipbreaker and grade according to workpiece material and machine stability is essential. The insert’s 11 mm size and 3.97 mm thickness allow straightforward accommodation in standard clamping systems that accept rhombic ISO plates. For workshops planning process layouts, choosing matching holders and clamping parts reduces vibrations and extends insert life, enabling a more economic production flow. Discuss application requirements with Metav Werkzeuge to confirm suitability of the Tungaloy DCMT11T308 T9215 insert and to arrange supply or technical consultation — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Manufacturer article number: 6777777 SKU: 6777777-Tungaloy Manufacturer SKU: TUN6777777 Model series: ISO‑turning indexable inserts Facts Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.8 mm Relief / free angle: 7° Insert angle: 55° Special features Material: carbide Coating: CVD‑coated (grade T9215) Chipbreaker: single‑sided Hole style: cylindrical hole + one‑sided countersink (40°–60°) Application: turning (external and internal) Typical system: ISO insert + holder/boring bar + shim/clamp set + replacement screws Best suited for medium‑steel machining; good for continuous to slightly interrupted cuts FAQ What materials is this insert best suited for? The DCMT11T308 T9215 Tungaloy insert is optimised for medium‑steel machining, combining CVD coating and a tough carbide substrate to deliver wear resistance and reliable edge life in continuous to slightly interrupted cuts. How is compatibility with a holder ensured? Compatibility depends on ISO form, relief angle, tolerance class, mounting type, size and thickness; verifying these parameters ensures the insert seats correctly and performs as designed. What chip control does this insert provide? The single‑sided chipbreaker promotes controlled chip formation and evacuation, reducing re‑cutting and supporting safer, more predictable turning operations. Can this insert cope with interrupted cuts? The T9215 grade offers good fracture resistance and is suitable for continuous to slightly interrupted cutting; for heavy interruptions, a different geometry or a more robust grade may be advisable. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T308 T9215 Wendeplatten - Tungaloy
Benefit from the CVD-coated T9215 carbide and ISO conformity for productive medium-steel turning; the combination of wear resistance and fracture toughness supports longer tool life and stable chips. Order the DCMT11T308 insert directly via Metav Werkzeuge or consult the advisers for application pairing. DCMT 11T308 T9215 Tungaloy turning insert — CVD-coated carbide, ISO rhombic 55° A DCMT11T308 T9215 insert for ISO-standard turning, engineered for medium-steel applications and designed to perform in continuous to lightly interrupted cuts. CVD-coated carbide T9215 for medium steel ISO-standard rhombic insert, 55° cutting angle 0.8 mm corner radius, 3.97 mm thickness Cylindrical hole with single-side 40°–60° countersink Proven wear resistance for consistent productivity The CVD-coated carbide grade T9215 combines elevated wear resistance with sufficient toughness to resist chipping under productive cutting conditions. This indexable cutting tip is optimised for medium-steel turning, delivering longer tool life and stable chip formation, which reduces downtime for tool changes and supports continuous production. The ISO conformity ensures predictable performance across compatible holders, so process parameters can be standardised for improved throughput. Practical geometry for reliable general turning The rhombic 55° geometry with a 0.8 mm corner radius and 3.97 mm plate thickness provides a balance between edge strength and versatility in external and internal turning tasks. The insert’s single-sided chipbreaker and the cylindrical hole with a single-side countersink (40°–60°) simplify clamping and positioning in ISO holders; compatibility is defined by form, clearance angle, tolerance class, fastening, size and thickness. These features result in a rigid setup with reduced vibration and better surface finish on workpieces made from medium-strength steels. Selection advice and quality assurance for shop-floor use When pairing the insert with a matching holder, choose a chipbreaker and grade aligned with material, cutting mode and stability to exploit the Tungaloy grade’s strengths. For intermittent cuts or unstable setups, favour lower feeds and robust holders to preserve the cutting edge; for steady bore or external turning, the geometry supports higher metal removal rates while maintaining reliable edge life. Documentation and ISO specification compliance simplify stock management and ensure interchangeability across machines. Contact Metav Werkzeuge for tailored application advice on Tungaloy CVD-coated inserts and to request a quotation for the DCMT11T308 T9215 insert. Technical data Article number: 6772452 Manufacturer: Tungaloy Manufacturer SKU: TUN6772452 Model series: ISO turning indexable inserts Article name: DCMT11T308 T9215 Tungaloy insert Facts Cutting angle: 55° Clearance angle: 7° Corner radius: 0.8 mm Thickness: 3.97 mm Size: 11 Special features Material: carbide Coating: CVD-coated (T9215) Hole: with hole — cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning Compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The DCMT11T308 T9215 insert is optimised for medium-steel machining; the T9215 CVD-coated carbide offers a high wear resistance combined with fracture toughness for productive steel turning. How does the chipbreaker affect cutting performance? The single-sided chipbreaker on this insert supports controlled chip formation under continuous to lightly interrupted cuts, improving process stability and surface finish for turning operations. Which holder characteristics determine compatibility? Holder compatibility depends on insert form, clearance angle (7°), tolerance class, fastening method, overall size and plate thickness (3.97 mm); matching these ensures secure clamping and repeatable results. Is this insert suitable for interrupted cuts? Yes, the CVD-coated grade provides toughness for lightly interrupted cuts, but for heavy interruptions a more robust edge preparation or different grade may be preferred to avoid chipping. What is the recommended corner radius for general finishing and roughing? The 0.8 mm corner radius balances edge strength and surface finish, making it suitable for general-purpose turning where a compromise between roughing stability and finishing quality is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of T9215 CVD‑coated carbide for high wear resistance, the DCMT11T308 rhombic geometry with a 0.8 mm corner radius for precise finishing, and a secure mounting concept that supports stable, productive turning operations. Order directly via Metav Werkzeuge or consult our specialists for holder compatibility and machining advice. DCMT 11T308 T9215 — ISO turning insert for external and internal turning, Tungaloy DCMT 11T308 T9215 is an ISO‑standard rhombic turning insert designed for medium steel machining, offering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. CVD‑coated T9215 grade for durability 0.8 mm corner radius for precise finishing 55° rhombic geometry for versatile turning Cylindrical hole with one‑sided countersink Consistent productivity for medium steel machining The combination of the T9215 grade and CVD‑coated carbide substrate delivers high wear resistance while maintaining fracture toughness, making the insert particularly suited to medium steel. This material pairing reduces flank wear and extends useful tool life, translating into fewer indexings and less downtime. As a result, shops benefit from improved throughput and predictable tool‑change intervals, which supports efficient production planning and lowers overall operating costs. Geometry and edge design for controlled cutting and surface finish The rhombic 55° geometry with a 0.8 mm corner radius and a 7° relief angle provides a versatile cutting profile for both external and internal turning. The acute geometry enables secure seating in standard ISO holders while the modest corner radius helps achieve good surface finish without sacrificing edge strength. Together these features promote stable cutting, refined chip formation and consistent part quality in serial and batch operations where repeatability is essential. System compatibility and simple integration into the toolroom Designed as part of an ISO insert system, the module integrates with matched external holders or boring bars using shims, clamp sets and standard replacement screws. The insert’s with‑hole format — a cylindrical hole plus a one‑sided countersink (40°–60°) — ensures secure fastening and repeatable indexing, which aids quick tool changes and consistent clamping force. The standardised format supports interchangeability across machines and reduces inventory complexity for workshops that run multiple makes of holders. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the Tungaloy T9215 turning insert, confirm holder compatibility and secure supply for your next production run Technical Data Article number: 6772447 Manufacturer SKU: TUN6772447 SKU: 6772447-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: DCMT11T308 T9215 Tungaloy-Wendeplatte Measurements and core data Corner radius: 0.8 mm Insert size: 11 mm Thickness: 3.97 mm Insert angle: 55° Relief angle: 7° Design and features Material: carbide Grade/coating: T9215 (CVD coating) Shape: rhombic Hole: with hole — cylindrical plus one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning Compatibility: dependent on holder form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The Tungaloy DCMT11T308 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for continuous to lightly interrupted cuts. How does the 0.8 mm corner radius affect finish and tool life? A 0.8 mm corner radius balances surface finish and edge strength, allowing the insert to produce good part surfaces while maintaining robustness during longer runs with the T9215 coating. Can the insert be used for internal turning as well as external? Yes, the rhombic 55° geometry and the insert’s standard ISO form make it suitable for both external and internal turning when paired with the appropriate holder or boring bar. How is the insert secured in the holder? The insert features a cylindrical hole with a one‑sided countersink (40°–60°), providing secure fastening and repeatable indexing when clamped with the matching clamp set and replacement screws. What is the manufacturer SKU for ordering and spare‑part management? The manufacturer SKU is TUN6772447 and the article number is 6772447 for the DCMT11T308 T9215 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable edge strength and ISO‑compatible geometry to keep turning operations productive and repeatable. Order the insert directly via Metav Werkzeuge or consult their application specialists for process matching. DCMT 11T308 T9215 indexable turning insert by Tungaloy — ISO rhombic, CVD‑coated carbide A DCMT11T308 T9215 ISO‑standard turning insert designed for external and internal turning in medium steels, offering a balanced mix of wear resistance and fracture toughness. ISO rhombic insert, 55° cutting angle CVD‑coated carbide grade T9215 0.8 mm corner radius for stable cutting Cylindrical hole with single‑side countersink High productivity for medium‑steel turning The T9215 grade is a CVD‑coated carbide designed as a first choice for productive medium‑steel machining. The coating provides elevated wear resistance, while the substrate retains sufficient toughness to resist chipping under continuous to lightly interrupted cuts. As a result, the insert supports higher material removal rates and longer tool life compared with uncoated grades, translating into lower machining times and fewer index changes per shift. ISO geometry and secure clamping for consistent results The rhombic ISO shape with a 55° cutting angle and 7° relief ensures compatibility with standard DCMT holders; fit and repeatability depend on holder form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) that enables reliable clamping and reproducible seating on the pocket, reducing vibration and positional variance across repeat tool changes. The 3.97 mm plate thickness contributes to rigidity in the clamping system for stable cutting. Controlled chip formation and surface quality A 0.8 mm corner radius combined with a single‑sided chipbreaker balances edge strength and surface finish: the radius reinforces the cutting edge for robustness on heavier feeds, while the chipbreaker shapes chips for consistent evacuation in external and internal turning. The geometry supports a good surface finish without sacrificing durability, especially when machining medium steels under steady feed and speed regimes. Practical benefits for production workflows The insert’s ISO conformity simplifies inventory management and changeover; the DCMT form is widely supported by standard outer holders and boring bars, enabling quick replacement and minimal downtime. The combination of CVD coating and a tough carbide core reduces unscheduled stoppages, increases process security and helps maintain component tolerances over longer tool life, contributing to predictable production throughput. Contact Metav Werkzeuge for application guidance, stock availability and tailored cutting‑data recommendations for the Tungaloy DCMT11T308 T9215 turning insert Technical Data Article number: 6774073 Manufacturer article number: 6774073 SKU: 6774073-Tungaloy Manufacturer SKU: TUN6774073 Label: DCMT11T308 T9215 Tungaloy‑Wendeplatte Dimensions & Geometry Cutting angle: 55° Relief angle: 7° Corner radius: 0.8 mm Thickness: 3.97 mm Size: 11 Materials & Features Material: carbide Coating: CVD Grade: T9215 Chipbreaker: single‑sided Hole: cylindrical hole + one‑sided countersink (40°–60°) Application: turning Model series: ISO turning inserts Suitable for continuous to mildly interrupted cuts FAQ What workpiece materials suit this insert? The Tungaloy DCMT11T308 T9215 insert is optimised for medium steels; the T9215 grade combines wear resistance and toughness for continuous and lightly interrupted turning on steel alloys. How is compatibility with a holder determined? Compatibility depends on holder form, relief angle, tolerance class, fastening method, insert size and thickness; the ISO rhombic form and the 55° cutting angle require a matching DCMT‑capable outer holder or boring bar. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius increases edge strength and improves tool life at higher feeds, while offering a balance between robustness and achievable surface finish compared with smaller radii. Does the insert require a special clamping screw or seat? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for standard indexable insert clamping; proper seating and torque on the clamping screw ensure repeatable positioning. Which chip control can be expected with this design? The single‑sided chipbreaker provides controlled chip formation for stable evacuation and consistent surface quality when machining medium steels under recommended cutting conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T308 T9215 Wendeplatten - Tungaloy
High wear resistance and dependable fracture toughness make the DCMT11T308 an efficient choice for medium-steel turning, offering stable chip control and ISO compatibility for straightforward tool changes. Benefit from the CVD-coated carbide grade T9215 for productive continuous to slightly interrupted cuts — order via Metav Werkzeuge or consult our specialists for application advice. DCMT11T308 T9215 Turning Insert — Tungaloy (CVD-coated carbide, rhombic) DCMT11T308 is an ISO-standard rhombic turning insert designed for external and internal turning applications in medium steels, optimised for productivity and tool life. CVD-coated carbide grade T9215 Optimised for medium-steel turning ISO-standard rhombic insert, 55° included angle Single-sided chipbreaker with countersunk hole High productivity through a wear-resistant grade The T9215 grade is a CVD-coated carbide developed for the demands of medium-steel machining. The coating provides improved wear resistance while the substrate maintains fracture resistance, which together enable higher material removal rates and steady tool life in continuous to slightly interrupted operations. This combination reduces downtime for tool changes and supports predictable production cycles, so processes remain efficient under repeatable conditions. Geometry that ensures precision and straightforward clamping The rhombic plate form with a 55° included angle and 7° clearance gives stable cutting engagement and flexible approach angles for a variety of turning tasks. A 0.8 mm radius at the cutting edge balances edge strength and surface finish, while the 3.97 mm thickness contributes to stable clamping and vibration resistance. As an ISO-standard insert, compatibility with holders is determined by form, clearance, tolerance class, fastening, size and thickness — enabling consistent fits across established holder systems. Process reliability and controlled chip formation This insert features a single-sided chipbreaker and a cylindrical hole + countersink (40°–60°) which together promote reliable chip control and secure fastening. The geometry and grade are tailored for external and internal turning of medium steel, providing a practical balance between surface quality and tool life. For operations that shift between continuous and light interruptions, the insert supports stable cutting without frequent readjustment, enhancing overall production reliability. Practical selection advice and application scope Select the chipbreaker and grade that match the workpiece material, cutting type and machine stability; the T9215 sort is a first choice for many medium-steel applications because it marries durability with toughness. Check holder compatibility against the insert form and dimensions before assembly, and prefer rigid setups for best results. For workshop teams seeking predictable performance, this insert provides an economical route to higher throughput with reduced scrap rates and fewer unplanned interruptions. Contact Metav Werkzeuge for specific advice on fitment and availability of the Tungaloy DCMT11T308 T9215 turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and stock status Technical data Manufacturer article number: 6772455 Manufacturer SKU: TUN6772455 Metav SKU: 6772455-Tungaloy Model series: ISO turning inserts Grade: T9215 Facts Plate size: 11 mm Thickness: 3.97 mm Nose radius: 0.8 mm Clearance angle: 7° Included angle: 55° Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Material: CVD-coated carbide Plate shape: rhombic Chipbreaker: single-sided Typical application: external and internal turning Compatibility: ISO-standard; check holder form, clearance, tolerance, fastening, size, thickness Suitable for: medium steel; continuous to slightly interrupted cuts FAQ What materials is this insert suitable for? The DCMT11T308 T9215 insert from Tungaloy is optimised for medium steel and performs well in continuous to slightly interrupted turning operations. How does the T9215 grade improve tool life? The T9215 CVD-coated carbide combines a wear-resistant coating with a tough substrate, providing enhanced wear resistance and fracture protection for sustained productivity. Which holder characteristics are required for proper compatibility? Compatibility depends on holder form, clearance, tolerance class, fastening method, plate size and thickness; the ISO designation ensures standardised fitting dimensions for compatible holders. What does the single-sided chipbreaker provide in turning operations? The single-sided chipbreaker on this insert improves chip control for many turning conditions, reducing built-up edge and helping maintain consistent surface finishes. Is this insert suitable for both external and internal turning? Yes, the geometry and clamping design make the DCMT11T308 suitable for both external and internal turning of medium steel components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T9215), a rhombic 11 geometry and secure clamping for reliable medium-steel turning; order genuine Tungaloy inserts directly via Metav Werkzeuge or request advice from our consultants. DCMT 11T308 T9215 Turning Insert — rhombic 11, CVD-coated by Tungaloy The DCMT11T308 is a rhombic ISO indexable insert designed for external and internal turning in medium-steel applications, offering high wear resistance and stable cutting performance. CVD-coated carbide for medium steel Rhombic geometry, size 11 for versatility 7° relief angle for secure cutting Cylindrical hole with 40°–60° countersink Higher productivity through wear-resistant grade and coating The CVD-coated T9215 grade combines high wear resistance with fracture toughness, making it a cost-effective choice for continuous to slightly interrupted turning in medium steel. The CVD-coated carbide surface reduces flank and crater wear, enabling longer tool life and more consistent component tolerances under sustained cycles. For production planners this translates into fewer indexings per batch and improved machining uptime, while operators benefit from predictable performance at raised cutting speeds. Technical terms such as CVD (chemical vapour deposition) refer to a thin, uniform coating layer that enhances hardness and temperature resistance during cutting. Stable cutting geometry that improves surface finish The rhombic insert form with an included angle of 55°, a 0.8 mm corner radius and a one-sided chipbreaker delivers controlled chip formation and reduced vibration. The 7° relief angle ensures the cutting edge disengages cleanly, lowering rubbing and heat generation at the flank face. Together these features help achieve a reliable surface finish and dimensional stability, especially when turning long or slender components. The cylindrical hole with a single-sided countersink (40°–60°) provides consistent clamping and repeatable seating in ISO-compatible toolholders, which supports reproducible results in series production. ISO compatibility and system advantages for workshop efficiency As an ISO standard turning insert, this item integrates into established systems: the insert, an appropriate external holder or boring bar, a shim/clamp kit and replacement screws form the complete tooling assembly. Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness, so stock management is simplified when holders are matched to ISO plates. The clear specification of thickness (3.97 mm) and size (11) aids ordering and inventory control. Using standardised inserts reduces tooling changeover time and supports consistent process chains on multi-shift production lines. For detailed cutting parameters, compatibility checks or to secure genuine Tungaloy inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone +49 2822 7131930 and request the Tungaloy DCMT11T308. Technical data Article number: 6773988 Manufacturer SKU: TUN6773988 SKU: 6773988-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DCMT11T308 T9215 Tungaloy-Wendeplatte Facts Size: 11 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Approach angle: 55° Special features Material: CVD-coated carbide (T9215) Geometry: rhombic insert Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning; external and internal turning Cutting conditions: continuous to light interrupted cuts Compatibility: ISO form, fits holders by form, relief, tolerance, fastening, size, thickness FAQ What materials is this grade optimised for? The T9215 grade on the DCMT11T308 is optimised for medium steel, offering a balance of wear resistance and toughness suited to productive turning operations. Can the insert be used for interrupted cuts? Yes — the insert is suited to continuous and light interrupted cuts; for severe interruptions a heavier-duty grade or geometry should be considered. Which toolholders fit this insert? ISO-standard turning holders that match the rhombic form, relief angle, tolerance class, fastening and size will be compatible with this insert. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided 40°–60° countersink provides secure seating and reliable clamping when used with the correct screw, shim and clamp arrangement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable fracture protection ensure steady production when tackling medium steels; the combination of a CVD-coated carbide grade and a compact rhombic form delivers predictable tool life and productivity. Order the DCMT11T308 T9215 directly via Metav Werkzeuge or ask our consultants if needed. DCMT 11T308 T9215 — Tungaloy ISO rhombic turning insert for medium steel, CVD-coated carbide A DCMT11T308 T9215 ISO rhombic turning insert engineered for external and internal turning of medium-strength steels, offering a balance of wear resistance and fracture safety in continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel turning ISO rhombic insert, 11 mm size 0.8 mm corner radius, 7° clearance Consistent cutting performance through CVD-coated carbide grade T9215 The T9215 grade combines a CVD-coated carbide substrate with a wear-resistant surface layer to extend tool life in demanding turning operations. CVD (chemical vapour deposition) coating forms a dense, adherent layer that reduces flank and crater wear, which translates to longer intervals between indexings and fewer unscheduled tool changes. For operations that require continuous high throughput or occasional slight interruptions, this composition provides a dependable mix of abrasion resistance and fracture toughness, helping to maintain cycle times and consistent dimensional results. Secure clamping and standardised geometry reduce setup time Built to the ISO rhombic profile with an 11 mm size and a 0.8 mm corner radius, the insert offers repeatable seating and clamping behaviour in compatible holders. The 7° clearance angle and a plate thickness of 3.97 mm ensure geometric stability under load, while the cylindrical hole with single-sided countersink (40°–60°) supports positive positioning and uniform clamp force. Because compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness, using ISO-standard geometry simplifies tool procurement and reduces setup time across different machines and toolposts. Practical system benefits for productivity and process stability The one-sided chipbreaker and the grade’s design make the insert particularly suited to medium steel turning applications, delivering improved chip control and surface finish in many production contexts. The cutting system is straightforward: indexable insert, matching external holder or boring bar, underlay/clamp set and spare screws — a configuration that supports fast changeovers and consistent repeatability. By choosing a coated carbide solution with fracture resistance, shops gain both the productivity of extended cutting intervals and the process stability needed for reliable batch manufacturing. For robust medium steel turning choose the Tungaloy T9215 grade — contact Metav Werkzeuge for ordering and technical advice at info@metav-werkezeuge.com or call +49 2822 7131930. Technical data Article number: 6777818 SKU: 6777818-Tungaloy Manufacturer SKU: TUN6777818 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate size: 11 mm Plate thickness: 3.97 mm Clearance angle: 7° Included angle (form angle): 55° Special features CVD-coated carbide (grade T9215) Rhombic plate form (ISO) Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker ISO designation DCMT11T308 (11T308) With hole Application: turning System assembly: indexable insert, matching holder or boring bar, underlay/clamp set, replacement screws Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert designed for? The DCMT11T308 T9215 insert is optimised for medium steel machining; the T9215 grade pairs CVD-coated carbide with fracture-resistant properties for reliable cutting performance. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius balances strength and finish: it improves edge robustness under load while maintaining a good surface finish in turning operations with the DCMT11T308 insert. Is the insert compatible with standard ISO holders? Yes, the ISO rhombic geometry (11T308) and the specified dimensions support compatibility with ISO-standard holders, provided the holder matches the form, clearance angle, tolerance class, clamping method, size and thickness. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with a single-sided countersink (40°–60°) provides positive location and uniform clamp force, enhancing repeatable seating and reducing the risk of movement under cutting forces. Which chip control features are included? The insert features a one-sided chipbreaker tailored to medium steel turning, promoting controlled chip formation and improved surface quality during continuous to slightly interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide and the robust T9225 grade for longer tool life and stable cuts; the ISO DCMT form and precise dimensions ensure predictable clamping and consistent results. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. DCMT11T308 T9225 DCMT turning insert by Tungaloy — ISO DCMT, CVD-coated carbide DCMT11T308 T9225 is an ISO‑conforming indexable turning insert for external and internal turning, designed for medium to heavy steel machining. CVD-coated carbide for extended tool life Universal T9225 grade for medium–heavy steel ISO DCMT shape with reliable clamping One-sided chipbreaker with countersunk hole Maximise uptime with a robust cutting grade The combination of CVD‑coated surface treatment and a carbide substrate delivers notable resistance to wear while retaining toughness under changing cut conditions. The T9225 grade is formulated as a universal, robust option for medium to heavy steel machining, reducing the frequency of insert changes and minimising unplanned downtime. This results in a measurable improvement in process economy and helps sustain production throughput with fewer interruptions. Predictable cutting behaviour from ISO geometry and precise dimensions Adherence to the ISO DCMT geometry guarantees compatibility with standard holders and repeatable clamping, so cutting forces and tool engagement remain consistent across batches. Key dimensions—corner radius 0.8 mm, insert size 11, thickness 3.97 mm and clearance angle 7°—are manufactured to tight tolerances to support stable machining and simplified process set‑up. The insert’s hole, a cylindrical bore with a single‑sided countersink (40°–60°), secures the insert reliably and facilitates quick replacement without compromise to positional accuracy. Versatile turning performance and straightforward system integration Equipped with a one‑sided chipbreaker, the insert is suited to both finish and semi‑roughing passes when matched to the workpiece and holder rigidity. Typical use covers both external turning and internal turning; selection of the chipbreaker and grade should reflect material, cut depth and machine stability. The cutting system comprises the ISO insert, the matching external holder or boring bar, a shim/clamp set and replacement screws, which together enable rapid maintenance and minimal inventory complexity while supporting repeatable results. For application support or to request immediate supply of Tungaloy DCMT11T308 T9225 turning inserts, contact Metav Werkzeuge for tailored recommendations and fast delivery — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Data Article number: 6781010 Manufacturer SKU: TUN6781010 SKU: 6781010-Tungaloy Model series: ISO turning inserts Designation: DCMT11T308 T9225 Material: carbide (CVD‑coated) Dimensions & angles Corner radius: 0.8 mm Insert size: 11 Thickness: 3.97 mm Clearance angle: 7° Wedge angle: 55° Countersink angle: 40°–60° Special features Universal grade T9225 for medium–heavy steel One‑sided chipbreaker Cylindrical hole with single‑sided countersink ISO DCMT rhombic insert form Typical application: external and internal turning System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials are best machined with this insert? The DCMT11T308 T9225 insert is intended primarily for medium to heavy steel machining where intermittent cuts or variable engagement demand additional toughness; selection of the chipbreaker should match the specific workpiece material. Which holders are compatible with this insert? Compatibility is determined by the ISO DCMT form, clearance angle, tolerance class, fastening style, size and thickness; use standard DCMT‑compatible external holders or boring bars designed for insert size 11 and 3.97 mm thickness. What are the key dimensions to consider for setting up the tool? Important values include corner radius 0..8 mm, thickness 3.97 mm, insert size 11, clearance angle 7° and the countersink range 40°–60° for correct seating and clamping. Does the insert have a coating and what is its benefit? The insert features a CVD‑coated carbide construction in grade T9225, offering improved wear resistance while maintaining toughness for variable cutting conditions, which extends tool life and supports higher productivity. Can the insert be used for both finishing and roughing? Yes — with appropriate selection of feed, depth of cut and the matching chipbreaker, the insert is suitable for finishing and semi‑roughing operations in turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMT 11T308 T9225 Wendeplatten - Tungaloy
Benefit from a CVD‑coated carbide T9225 grade and a sturdy 55° rhombic geometry with a 0.8 mm corner radius for reliable medium‑to‑heavy steel turning; order directly via Metav Werkzeuge or consult our advisors for application matching. DCMT 11T308 T9225 — Tungaloy indexable turning insert for ISO turning A DCMT11T308 T9225 indexable insert designed for ISO‑standard external and internal turning, offering robust carbide cutting performance when interrupted cuts or variable engagement demand extra toughness CVD‑coated carbide T9225 55° rhombic geometry 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Consistent performance for medium‑to‑heavy steel turning The CVD‑coated T9225 grade combines wear resistance with enhanced toughness, making the insert well suited for medium‑to‑heavy steel machining where chip loads and intermittent cuts vary. The CVD layer increases surface hardness and heat resistance, while the underlying carbide substrate maintains edge stability. Together with the 55° rhombic form and a 0.8 mm corner radius, this geometry gives a balanced edge that delivers consistent cutting forces and reliable tool life under changing conditions, improving process stability in shop‑floor turning operations. Secure mounting and ISO compatibility that simplifies tool selection The insert follows ISO dimensions and is compatible with holders when the form, clearance angle, tolerance class, fixing method, size and thickness match. A defined 7° clearance angle supports predictable contact geometry and consistent chip flow against the toolholder. The rhombic plate form and the specified hole style — cylindrical with a single‑side countersink (40°–60°) — ensure reproducible seating and clamping, reducing rework from misalignment. This precision fit supports repeatable results and simplifies tooling choices in production environments. Improved chip control and predictable edge life Equipped with a single‑sided chipbreaker, the insert promotes controlled chip formation for a wide range of feeds and depths of cut, reducing the risk of entangling or long ribbon chips. The cutting‑edge design and the T9225 substrate deliver a favourable cost‑to‑performance balance: stable surface finish and extended tool life under moderate to heavy engagement without over‑sacrificing toughness. For best results, select the chipbreaker and grade that match workpiece stability and feed strategy to maximise uptime and minimise dressing or regrinding cycles. Application scope and workshop guidance This indexable plate is intended for both external and internal turning tasks where versatility and robustness are priorities. The system comprises the ISO insert, a matching external holder or boring bar, a locating shim or clamp set and replacement fixing screws; correct assembly ensures secure clamping and optimal heat transfer. When machining steels, choose the T9225 grade for operations that require a blend of wear resistance and impact tolerance. For unfamiliar applications, document cutting conditions and select a compatible holder geometry to maintain consistent performance. For specific cutting‑data recommendations or to confirm suitability for a particular turning job, contact Metav Werkzeuge for tailored advice and ordering assistance. Technical data Article number: 6781054 SKU: 6781054-Tungaloy Manufacturer SKU: TUN6781054 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Included angle: 55° Clearance angle: 7° Plate thickness: 3.97 mm Plate size: 11 Special features Material: carbide Grade/coating: T9225, CVD-coated Plate form: rhombic Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ What materials is this insert suitable for machining? The DCMT11T308 insert in T9225 is designed primarily for steel machining, offering a good balance of wear resistance and toughness for medium‑to‑heavy turning operations. How does the CVD coating affect performance? The CVD coating on the T9225 grade increases surface hardness and thermal stability, improving wear resistance and extending the cutting edge life under steel turning conditions. Which holder features are required for proper compatibility? Proper compatibility requires a holder matching the ISO form, the 55° rhombic angle, the 7° clearance angle, the insert size and thickness, and the specified hole and clamping arrangement. Is this insert suitable for interrupted cuts? Yes, the T9225 carbide grade and robust edge geometry make the insert suitable for operations with intermittent engagement or variable chip loads. What is the chipbreaker style and its benefit? The insert has a single‑sided chipbreaker, which promotes controlled chip formation and improved surface finish across a range of feeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9225 Wendeplatten - Tungaloy
Take advantage of the Tungaloy T9225 grade and the precise 55° rhombic geometry to achieve stable chip formation and consistent surface quality in medium to heavy turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCMT 11T308 T9225 – ISO turning insert for medium to heavy steel by Tungaloy DCMT11T308 T9225 indexable turning insert engineered for robust performance in steel turning, offering a CVD-coated carbide grade and ISO-compatible geometry for reliable machining CVD-coated carbide for high wear resistance Robust universal grade for medium-heavy steel 55° rhombic geometry for versatile turning 0.8 mm corner radius and 7° relief angle Reliable cutting performance for mixed turning operations The DCMT11T308 T9225 insert combines a CVD-coated carbide substrate with a robust universal grade designed for medium to heavy steel machining, delivering extended tool life under variable engagement conditions. The single-sided chipbreaker and Tungaloy's T9225 chemistry promote stable chip formation, which reduces tool interruptions and supports predictable process behaviour in semi-continuous and slightly interrupted cuts. This results in fewer tool changes and lower production downtime, making the insert a practical choice where both performance and economy matter. Compatibility with ISO indexable tool systems ensures repeatable positioning and simplifies stock control of cutting edges. Simple integration with ISO toolholders and secure clamping Thanks to its 55° rhombic geometry and standard ISO designation, the insert fits a wide range of external holders and boring bars when the holder form, clearance angle, tolerance class, clamping method, size and thickness match. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to secure positive clamping and repeatable seating; the 3.97 mm thickness, 7° relief angle and 0.8 mm corner radius help balance edge strength and surface finish. These dimensional choices aid stable cutting in less rigid set-ups and make the component straightforward to integrate into existing turning tool systems without extensive requalification. Increased productivity and dependable process security Adopting this Tungaloy grade supports higher productivity through longer tool life and consistent cutting results on a range of steels. The combination of the CVD coating and the universal T9225 substrate offers improved resistance to flank wear and edge deterioration under fluctuating cutting conditions, reducing scrap risk and rework. For operations that require flexibility between finishing and medium-depth turning, the insert's geometry and chip control characteristics allow efficient chip evacuation and a stable cutting zone, which helps to maintain cycle times and surface quality. Choosing this insert contributes to a cost-effective machining strategy by lowering the frequency of index changes and supporting predictable component tolerances. For reliable medium-to-heavy steel turning with the Tungaloy T9225 insert, contact Metav Werkzeuge for tailored application support and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781459 Manufacturer SKU: TUN6781459 SKU: 6781459-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DCMT11T308 Material: carbide Core specifications Geometry angle: 55° Corner radius: 0.8 mm Relief angle: 7° Thickness: 3.97 mm Size: 11 Design and special features Grade: T9225 (CVD-coated carbide) Chipbreaker: one-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Plate form: rhombic Application: turning Compatibility: ISO indexable turning holders FAQ Is this insert suitable for external and internal turning? The DCMT11T308 T9225 indexable turning insert is suitable for both external and internal turning applications when used with the corresponding ISO holders and appropriate tool geometry. Which materials are recommended for the T9225 grade? Tungaloy's T9225 grade is optimised for medium to heavy steel machining and performs well under slightly interrupted cuts and varying engagement conditions. How does the 0.8 mm corner radius affect the finish and edge life? A 0.8 mm corner radius provides a balance between edge strength and surface finish; the DCMT11T308 insert benefits from improved edge durability while maintaining acceptable surface quality for general turning tasks. Can the insert handle interrupted cuts? Yes, the combination of the T9225 substrate and the insert geometry offers sufficient toughness for slightly interrupted cuts, supporting stable cutting and reduced edge chipping risk. What must be considered when mounting this insert in a holder? Ensure the holder matches the ISO form, clearance angle, tolerance class, clamping method, size and thickness; the cylindrical hole with countersink on the insert secures repeatable positioning and stable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide in the T9225 grade combined with ISO DCMT11T308 geometry and a 0.8 mm corner radius ensures reliable performance in medium-to-heavy steel turning; compatibility with ISO holders guarantees straightforward integration. Order the DCMT11T308 T9225 Tungaloy insert directly via Metav Werkzeuge or consult our advisors for application support. DCMT 11T308 T9225 – Tungaloy ISO indexable insert for turning A DCMT11T308 T9225 insert engineered for ISO-standard turning, offering a CVD-coated carbide grade for robust, repeatable performance in varied steel machining conditions. CVD-coated carbide grade T9225 ISO DCMT11T308 geometry Rhombic shape with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Reliable machining when conditions vary The CVD-coated carbide composition and the T9225 grade provide a balance of toughness and wear resistance tailored for medium-to-heavy steel turning. The coating reduces flank wear and enhances thermal stability, which leads to longer tool life under fluctuating engagement conditions. For machinists seeking predictable cycle times, this insert reduces downtime by maintaining cutting-edge integrity across interrupted cuts and variable feed rates. The formulation is particularly suitable where a combination of strength and resilience is required rather than extreme hardness alone. Precise engagement and form-factor benefits The rhombic plate form with a nominal size 11 and a 0.8 mm corner radius creates a stable cutting edge for both external and internal turning operations. The 7° clearance angle and the 55° lead angle ensure controlled chip flow and consistent contact geometry, improving surface finish and dimensional repeatability. The insert’s cylindrical hole with a single-sided countersink (40°–60°) enables secure clamping and straightforward indexability on ISO-compatible holders; compatibility depends on holder form, tolerance class, fastening method, size and plate thickness, so verify holder specifications before assembly. Controlled chip formation and process stability The single-sided chipbreaker geometry is tuned to produce stable chips for a range of feeds and depths typical in steel turning. By guiding chip formation, the chipformer helps prevent entanglement and promotes safe evacuation from the cutting zone, particularly in operations with intermittent engagement. The combination of geometry and material results in higher process security and reduced tool-related scrap, supporting a more efficient production flow and predictable tool-change intervals. Practical benefits for workshop integration This insert is part of an ISO-standard indexable system: an ISO plate, a suitable external holder or boring bar, a shim/clamping set and replacement screws. Using standardised sizes such as DCMT11T308 simplifies inventory management and reduces fitting errors. For operations that mix materials or frequently change setups, the universality of the T9225 grade minimises the need for multiple special-purpose grades while still delivering robust performance for steel machining tasks. For assured performance with Tungaloy’s T9225 grade and quick supply, contact Metav Werkzeuge for tailored application advice and rapid delivery at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6781182 Manufacturer SKU: 6781182-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DCMT11T308 Material: carbide Facts Plate size: 11 Plate thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Lead/angle: 55° Hole style: with hole; cylindrical hole + one-sided countersink (40°–60°) Special features Grade: T9225 (robust universal grade for medium-to-heavy steel machining) Coating: CVD-coated carbide Plate form: rhombic Chipbreaker: single-sided Application: turning; external and internal turning compatibility FAQ What materials is this insert designed for? The DCMT11T308 T9225 Tungaloy insert (SKU 6781182-Tungaloy) is optimised for medium-to-heavy steel machining and performs well where interrupted cuts or variable engagement demand increased toughness. How does the T9225 grade benefit everyday turning operations? The T9225 grade combines toughness and wear resistance to deliver consistent cutting performance in changing conditions; the Tungaloy CVD-coated carbide reduces flank wear and supports longer tool life in steel turning. Is this insert compatible with standard ISO holders? Compatibility is governed by holder form, clearance angle, tolerance class, fastening method, size and thickness; the DCMT11T308 geometry adheres to ISO norms, enabling use with matching ISO indexable systems when specifications align. What chip control can be expected from this insert? The single-sided chipbreaker offers controlled chip formation for a range of feeds and depths, improving process stability and facilitating safe chip evacuation in both external and internal turning. Can this insert be used for finishing operations? Yes; with the correct feed and speed settings the rhombic form and 0.8 mm corner radius enable good surface quality, while the 7° clearance supports stable contact for finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide T9225 and robust rhombic 55° geometry for stable chip formation and extended tool life; the 0.8 mm corner radius offers versatility across medium to heavy steel turning. Order the DCMT11T308 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT11T308 T9225 ISO turning insert — indexable insert for medium to heavy steel by Tungaloy A DCMT11T308 T9225 indexable insert designed for ISO-standard external and internal turning, offering a CVD-coated carbide grade optimised for interrupted cuts and variable engagement conditions CVD-coated carbide grade T9225 Rhombic 55° geometry 0.8 mm corner radius for versatility Cylindrical hole with 40°–60° countersink ISO-compatible for standard toolholders Reliable cutting performance when machining medium to heavy steel The combination of CVD-coated carbide and the T9225 grade delivers consistent cutting performance under demanding conditions. The coating improves surface hardness and thermal resistance, which translates into longer tool life and fewer index changes. The grade is formulated for the mid-to-heavy range of steel turning where variable cutting conditions and light interruptions occur; this ensures stable chip formation and reduced risk of unexpected wear. For production environments seeking predictable tool behaviour, the coated substrate provides measurable gains in uptime and process stability. Geometry that balances precision, strength and surface finish The rhombic shape with a 55° lead angle and a 0.8 mm corner radius offers a practical balance between cutting-edge strength and surface quality. A small radius like 0.8 mm increases edge robustness for shoulders and roughing while still enabling acceptable surface finish for semi-finish passes. The 7° relief reduces rubbing and heat buildup behind the cutting edge, supporting efficient evacuation of chips. These geometry choices mean fewer tool changes and more consistent part tolerances in both external and internal turning operations. Practical compatibility and integration into ISO tool systems As an ISO-standard indexable insert, compatibility with holders is determined by form, relief angle, tolerance class, fixing method, size and thickness. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping, and a thickness of 3.97 mm that fits common toolholders. The single-sided chipbreaker is matched to the T9225 grade for effective chip control in typical steel applications. For workshops standardising on ISO inserts, this component integrates without complex adaptation, supporting lean tooling logistics and easier stock management. Productivity and selection advice for process reliability Choosing the right chipbreaker and grade for the workpiece and machining conditions is decisive: the T9225 sort is a robust universal grade suited to changing engagement and slightly interrupted cuts. Its attributes support higher material removal rates while maintaining a stable cutting edge, which contributes to improved overall process economy. When planning operations, pair the insert with a compatible external holder or boring bar plus the specified shim/clamp set and replacement screws to ensure repeatable clamping and minimal vibration. For uncertain cases, consult technical data sheets to match insert geometry, grade and chipbreaker to the intended cycle. Contact Metav Werkzeuge for tailored application advice on the DCMT11T308 T9225 indexable insert and delivery options — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 6781487 SKU: 6781487-Tungaloy Manufacturer SKU: TUN6781487 Designation: DCMT11T308 T9225 Tungaloy indexable insert Model series: ISO-Drehwendeschneidplatten Core data Corner radius: 0.8 mm Thickness: 3.97 mm Size: 11 mm Relief angle: 7° Lead angle: 55° Hole: with hole Countersink angle: 40°–60° Special features CVD-coated carbide grade T9225 Rhombic insert shape Single-sided chipbreaker ISO-compatible for standard holders Intended for external and internal turning FAQ What workpieces is this insert best suited for? The DCMT11T308 T9225 indexable insert is optimised for medium to heavy steel turning, especially where variable engagement or light interruptions occur. Can the insert be used for internal turning and boring bars? Yes, the ISO-standard form and the 55° geometry allow use in both external holders and suitable boring bars for internal turning. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for roughing and shoulder cuts while still supporting an acceptable surface finish during semi-finishing passes. What does the CVD coating provide in practice? The CVD-coated surface on the T9225 grade enhances thermal resistance and wear behaviour, resulting in extended tool life and more consistent cutting under varying conditions. Is the insert compatible with standard clamping systems? Yes, the DCMT11T308 has a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping in ISO-compatible toolholders. Does this insert include a chipbreaker, and why does it matter? The insert features a single-sided chipbreaker matched to the T9225 sort; this supports controlled chip formation, improving safety and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9225 Wendeplatten - Tungaloy
Achieve consistent medium-to-heavy steel turning with the combination of a CVD-coated carbide grade and robust geometry: the T9225 grade provides toughness for interrupted cuts while the ISO rhombic form ensures reliable clamping and repeatable results. Order directly via Metav Werkzeuge or consult the team for application-specific advice. DCMT11T308 T9225 — ISO turning insert for medium-to-heavy steel (Tungaloy) The DCMT11T308 T9225 is an ISO rhombic indexable insert designed for external and internal turning operations where toughness and stable chip control are required. ISO rhombic insert DCMT form CVD-coated carbide grade T9225 0.8 mm corner radius for robust cuts Cylindrical hole with 40°–60° countersink Reliable performance in medium-to-heavy steel turning The combination of CVD-coated carbide and the T9225 grade delivers a balance of hardness and toughness suited for fluctuating engagement conditions and lightly interrupted cuts. The coating improves thermal resistance and wear behaviour, which translates into longer tool life and fewer interruptions for insert changes. By choosing this geometry and grade, production benefits from predictable tool longevity and consistent part quality, reducing total machining cost per component. Precise geometry for predictable surface quality and stability The rhombic form with a 55° principal angle and 0.8 mm corner radius gives a controlled cutting edge that helps maintain dimensional accuracy while offering edge strength for more demanding passes. The 7° relief contributes to secure seating and correct rake geometry in most ISO-compatible holders. A stable clamping arrangement is supported by the insert’s cylindrical hole with one-sided countersink (40°–60°), improving repeatability and reducing vibration-related issues when paired with an appropriate toolholder. System integration and practical application benefits As part of an ISO insert system, the plate mates with external holders or boring bars selected by form, clearance angle, tolerance class, fastening method, size and thickness. The one-sided chipbreaker and the universal character of the grade allow selection according to workpiece material and machining stability. For shops aiming to optimise cycle time and reduce unplanned downtime, the insert’s combination of geometry and grade offers efficient chip control and robust cutting performance in turning operations on steel and related alloys. Contact Metav Werkzeuge for tailored application advice and to source Tungaloy DCMT11T308 T9225 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance Technical data Article number: 6781118 SKU: 6781118-Tungaloy Manufacturer SKU: TUN6781118 Article name: DCMT11T308 T9225 Tungaloy insert Facts Corner radius: 0.8 mm Thickness: 3.97 mm Insert size: 11 mm Relief angle: 7° Principal angle: 55° Special features Material: carbide Coating: CVD-coated Grade: T9225 Chipbreaker: one-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Plate form: rhombic Application: turning Insert designation: DCMT11T308 FAQ What materials is this insert best suited for? The DCMT11T308 T9225 is optimised for medium-to-heavy steel turning; the T9225 grade offers toughness and wear resistance suited to fluctuating engagement conditions. Does the insert require a specific holder type? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; use an ISO-compatible holder matched to the rhombic DCMT form. How does the CVD coating affect performance? The CVD-coated surface increases thermal stability and wear resistance, resulting in extended tool life and more consistent surface finishes during prolonged turning cycles. Is this insert suitable for interrupted cuts? Yes, the T9225 grade provides enhanced toughness for lightly interrupted cuts and variable engagement, improving edge stability under shock loads. Which chip control can be expected with this geometry? The one-sided chipbreaker combined with the rhombic shape offers reliable chip control in external and internal turning when matched to appropriate cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T308 T9225 Wendeplatten - Tungaloy
Combining a CVD-coated carbide T9225 grade with a 0.8 mm corner radius and ISO-compliant rhombic geometry yields a reliable solution for medium-to-heavy steel turning; the insert is designed for secure clamping and consistent chip control, reducing downtime and tool changes — order or request application advice via Metav Werkzeuge. DCMT DCMT11T308 11T308 T9225 Turning Insert — 55° Rhombic, CVD-coated (Tungaloy) A DCMT11T308 Tungaloy turning insert for ISO-compliant external and internal turning, optimised for medium-to-heavy steel machining where interrupted cuts and variable engagement demand toughness and stable chip formation CVD-coated carbide T9225 for robustness 55° rhombic geometry for versatile turning 0.8 mm corner radius for strong cutting edge Cylindrical hole + countersink 40°–60° for secure clamping Reliable performance under variable cutting conditions The CVD-coated carbide construction and T9225 grade combine wear resistance with toughness to maintain cutting-edge integrity during mixed and interrupted cuts. This composition was selected for process reliability in medium-to-heavy steel operations, where stable chip control and predictable tool life directly influence productivity. The result is fewer unscheduled tool changes and a more consistent surface finish, which supports efficient batch and single-piece manufacturing alike. Secure clamping and straightforward ISO integration Compatibility with ISO tool systems is determined by form, 7° clearance angle, tolerance class, toolholder compatibility, clamping and plate dimensions. The insert's 55° rhombic geometry, 3.97 mm thickness and 11 mm size make it suitable for a wide range of standard holders. The cylindrical hole with a single-side countersink (40°–60°) ensures positive locating and reliable clamping under higher cutting forces. Clear specification of these dimensions simplifies holder selection and reduces set-up time in production environments. Economic efficiency and recommended applications Designed for both external and internal turning, the insert is a practical choice when machining steel with occasional interruptions or varying engagement. The 0.8 mm corner radius balances edge strength and profile definition, extending service life while maintaining acceptable surface quality. For workshops seeking predictable costs and improved uptime, Tungaloy's combination of geometry and T9225 coating provides a cost-effective compromise between longevity and cutting performance; the DCMT11T308 type performs particularly well when paired with an appropriate single-side chipbreaker and a suitably rigid tool assembly. For reliable medium-to-heavy turning with Tungaloy's T9225-grade inserts, contact Metav Werkzeuge for availability and application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781073 Manufacturer SKU: TUN6781073 Supplier SKU: 6781073-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: DCMT11T308 Core dimensions Size: 11 Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Geometrical angle: 55° Countersink angle: 40°–60° Design & special features Material: carbide Coating: CVD-coated Grade: T9225 Shape: rhombic Hole: cylindrical hole with single-side countersink Chipbreaker: single-side Application: turning System: insert, compatible external holder or boring bar, shim/clamp set and replacement screws FAQ Which materials is this insert suitable for? The insert is specified for medium-to-heavy steel machining; the T9225 grade and CVD-coated carbide make it particularly suitable for steel workpieces and operations with variable engagement. How does the T9225 grade affect machining performance? T9225 provides a balance of toughness and wear resistance; in practice the Tungaloy T9225 grade extends tool life under interrupted cuts while maintaining good edge stability. What are the key dimensions to check for compatibility with a holder? Check the ISO designation DCMT11T308, plate size 11, 3.97 mm thickness, 0.8 mm corner radius, and the 7° clearance angle to ensure correct fit and clamping in the chosen toolholder. How is the insert clamped in the toolholder? Clamping is achieved via the cylindrical hole with a single-side countersink (40°–60°); this provides precise locating and secure fixation when used with the appropriate clamp, shim and screw set. For which turning applications is this insert recommended? The insert is recommended for external and internal turning of steel components where moderate to heavy cuts and occasional interruptions are expected; the geometry and chipbreaker suit both roughing and mixed finishing tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T312 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade (AH6225) and a sharp yet stable cutting edge to ensure consistent mid-range turning performance in stainless steel. Order the DCMT11T312 AH6225 turning insert directly via Metav Werkzeuge or ask our consultants if needed. DCMT 11T312 AH6225 turning insert (ISO) by Tungaloy — 7° clearance, 1.2 mm corner radius DCMT11T312 AH6225 is an ISO‑standard rhombic indexable turning insert designed for general turning tasks, optimised for stainless steel and versatile production environments. PVD-coated carbide AH6225 for stainless steel 1.2 mm corner radius for robust edge form 7° clearance angle for stable cutting Rhombic ISO shape DCMT 11T312 Consistent cutting performance for difficult-to-cut stainless steel The insert combines a PVD-coated carbide substrate with the AH6225 grade to balance sharpness and edge stability. This makes it particularly suitable for machining stainless steel where adhesion and work‑hardening are common challenges. The coating reduces built‑up edge and improves wear resistance, while the substrate toughness supports interrupted cuts. As a result, the component life cycle is extended and downtime for insert changes is reduced, supporting a more reliable production flow. Secure clamping and universal ISO compatibility The rhombic form (DCMT 11T312) and the specified hole geometry — cylindrical hole with single‑side countersink (40°–60°) — ensure repeatable seating in standard ISO holders. The 3.97 mm plate thickness and the tolerance match required by ISO systems allow predictable tool overhang and clamping forces, which maintain cutting stability. Choosing a compatible external holder or boring bar, together with the correct clamping set and replacement screws, prevents micro‑movement and preserves the intended cutting geometry during longer cycles. Process benefits: chip control and economy in medium duty turning With a 1.2 mm corner radius and a single‑sided chipbreaker, the insert manages chip formation reliably under varying cutting conditions; this reduces risk of entanglement and promotes consistent surface finish. The grade AH6225 is optimised as a universal choice for stainless steel, offering good flank wear behaviour and stable edge retention for medium material removal rates. In practical terms, shops benefit from fewer indexings, predictable part quality and a favourable cost‑per‑part ratio when the insert is paired with a matching holder and machining strategy. Contact Metav Werkzeuge for advice on selecting the correct holder and grade for Tungaloy AH6225 inserts, or to order the DCMT11T312 insert directly from our stock Technical data Article number: 6903294 Manufacturer SKU: TUN6903294 SKU: 6903294-Tungaloy Core specifications Insert designation: DCMT11T312 Grade / coating: AH6225 (PVD-coated) Corner radius: 1.2 mm Clearance angle: 7° Insert size: 11 Plate thickness: 3.97 mm Included hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Material: carbide Shape: rhombic (DCMT) Chipbreaker: one-sided Application: turning (external and internal) Typical system: ISO insert, compatible holder or boring bar, support pad/clamping kit, spare screws FAQ What materials is this insert suited for? The DCMT11T312 AH6225 insert is formulated for stainless steel and performs well in a range of medium‑duty turning applications where adhesion and work‑hardening are concerns. How does the AH6225 grade affect tool life? AH6225’s PVD coating and carbide substrate provide a balance of wear resistance and edge toughness, extending life on stainless steel compared with uncoated grades under comparable conditions. Which holders are compatible with this insert? Compatibility depends on form, clearance, tolerance class, fastening, size and thickness; select an ISO‑compatible external holder or boring bar designed for DCMT inserts and ensure correct clamping hardware is used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T312 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade tailored for stainless steels, a sharp yet stable cutting edge and ISO compatibility for reliable tool changes — ideal for steady medium-duty turning. Order the insert directly via Metav Werkzeuge or consult the team for application guidance. DCMT 11T312 AH6225 Tungaloy turning insert — PVD-coated carbide, 1.2 mm radius The DCMT11T312 AH6225 is an ISO‑standard indexable insert for external and internal turning, optimised for machining rostfreie Stähle with a sharp, stable cutting edge and single‑sided chipbreaker. PVD-coated carbide AH6225 for stainless steels Sharp, stable cutting edge for medium-duty turning Rhombic format DCMT 11T312 with 1.2 mm radius Cylindrical hole with 40°–60° countersink for secure clamping Consistent machining performance for rostfreie Stähle The combination of a PVD-coated surface and a wear‑resistant carbide substrate provides predictable tool life and consistent cutting behaviour when machining stainless steels. The chosen grade delivers a sharp cutting edge that resists chipping under varying conditions, which translates into fewer interruptions and more stable cycle times. For production environments aiming for repeatable part quality, the coating reduces built‑up edge and helps maintain dimensional accuracy over longer tool life. Plug‑and‑play compatibility reduces setup time Designed as an ISO-standard turning insert, the geometry and fixing details ensure compatibility with common external holders and boring bars. The rhombic plate form and the cylindrical hole with single-sided countersink (40°–60°) enable secure clamping and repeatable indexation. With a 7° clearance and a plate thickness of 3.97 mm, the insert fits standard toolholders and simplifies inventory management by matching established holder geometries and tolerance classes. Controlled chip formation and reliable surface finish The single-sided chipbreaker is tuned to medium turning operations and assists in breaking and evacuating chips reliably, reducing cycle variability and improving surface quality. In less technical terms, the chipbreaker shapes the chip so it clears the cutting zone without entangling, which is particularly useful when turning longer parts or interrupted cuts. Combined with the grade’s edge stability, this results in good surface finishes and reduced secondary operations. Application guidance and suitability The insert is intended for turning applications where a balance between edge sharpness and stability is needed. Typical setups include external and internal turning of rostfreie Stähle using a matching external holder or boring bar, an underlay/clamping set and replacement screws as required. Selection of the chipbreaker and grade should be matched to the workpiece material, machining parameters and machine stability to achieve the best cycle economy. Contact Metav Werkzeuge to discuss matching holders, availability or tailored application advice for this Tungaloy insert — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 6903290 Manufacturer SKU: TUN6903290 Designation: DCMT11T312 AH6225 Tungaloy insert Series: ISO‑Drehwendeschneidplatten Material: Carbide Application: Turning Hole style: with hole, cylindrical hole + single-sided countersink (40°–60°) Facts Corner radius: 1.2 mm Included angle: 55° Clearance (free angle): 7° Plate thickness: 3.97 mm Plate size: 11 Edge type: single-sided chipbreaker Manufacturer article number: 6903290 Special features PVD-coated grade AH6225 Rhombic plate form (DCMT) ISO compatibility for standard holders Sharp, stable cutting edge for medium-duty turning Suitable for rostfreie Stähle machining FAQ What materials is this insert intended for? The DCMT11T312 AH6225 insert is designed primarily for machining rostfreie Stähle, offering a balance of sharpness and edge stability for medium turning tasks. How does the chipbreaker affect performance? The single-sided chipbreaker on this Tungaloy turning insert assists in chip control and evacuation, improving surface finish and reducing the risk of chip interference during turning. Which toolholders are compatible with this insert? Compatibility depends on holder geometry, free angle, tolerance class, fixation and plate thickness; the ISO‑standard form of the insert ensures fitment with commonly used external holders and boring bars. What are the key dimensional values to check before ordering? Verify the corner radius (1.2 mm), plate size (11), plate thickness (3.97 mm) and the hole/countersink style to ensure correct clamping and indexing. Is the grade coated and what benefit does the coating provide? The AH6225 grade is PVD-coated, which helps reduce built‑up edge and extends consistent cutting performance when turning rostfreie Stähle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMT 11T312 AH6225 Wendeplatten - Tungaloy
Combine the universal AH6225 PVD‑coated carbide grade with a 1.2 mm corner radius and a 7° relief angle to achieve a reliable cutting edge and consistent performance when turning rostfreien Stahl; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. DCMT11T312 AH6225 DCMT indexable insert for turning — Tungaloy The DCMT11T312 AH6225 indexable insert is an ISO‑standard rhombic turning insert optimised for medium turning of rostfreien Stahl and intended for use with compatible external holders or boring bars. ISO rhombic turning insert DCMT11T312 AH6225 PVD‑coated carbide for rostfreien Stahl 1.2 mm corner radius for robust cutting edges 7° relief angle and 3.97 mm plate thickness Consistent edge life through the AH6225 grade The PVD‑coated carbide grade AH6225 is engineered for a balance of sharpness and edge stability in medium turning operations. As a PVD‑coated material, it offers improved wear resistance and temperature tolerance compared with uncoated grades, which translates into longer intervals between indexings and fewer unexpected tool changes. The single‑sided chipbreaker supports controlled chip formation during interrupted cuts and variable conditions, thereby enhancing process reliability and repeatability for workshop production runs. Quick set-up and secure clamping reduce machine downtime Conformance to ISO geometry and the rhombic plate form ensure broad compatibility with standard holders; the insert’s rhombic shape and with hole configuration (cylindrical hole with single‑side countersink 40°–60°) permit precise, repeatable mounting. The combination of an accurately defined plate thickness of 3.97 mm, plate size 11 and the secure hole/countersink arrangement reduces set‑up time and minimises the risk of misalignment. Together, these features contribute to stable cutting conditions and a predictable surface finish across series production. Practical selection and production benefits for workshops A corner radius of 1.2 mm delivers a compromise between edge strength and finish, making it well suited to general turning tasks where both tool life and surface quality matter. The 7° relief angle supports effective cutting forces and prevents premature flank wear on longer tool engagements. Choosing the DCMT11T312 AH6225 for medium turning of rostfreien Stahl yields improved cycle times and consistent component quality; further cutting data and recommended parameters are available for integration into existing process sheets and CAM strategies. Contact Metav Werkzeuge today for application advice on the Tungaloy DCMT11T312 AH6225 insert — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6903298 SKU: 6903298-Tungaloy Manufacturer SKU: TUN6903298 Model series: ISO-Drehwendeschneidplatten Label: DCMT11T312 AH6225 Tungaloy insert Facts Corner radius: 1.2 mm Relief angle: 7° Included angle: 55° Thickness: 3.97 mm Size: 11 mm Special features Carbide base material PVD coating, grade AH6225 Single‑sided chipbreaker Rhombic plate form With hole: cylindrical hole + single‑side countersink (40°–60°) Application: Turning Compatibility: ISO‑standard holders FAQ Which materials is this insert intended for? The DCMT11T312 AH6225 insert is specified as a universal grade for rostfreien Stahl and performs well across a range of stainless applications under medium cutting conditions. What is the corner radius and how does it influence performance? The 1.2 mm corner radius increases edge robustness and improves resistance to chipping, making the insert suitable for general turning where a balance of surface finish and tool life is required. How is the insert secured in the holder? The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure, repeatable clamping in ISO‑compatible external holders and boring bars. What coating and substrate does the grade use? Grade AH6225 is a PVD‑coated carbide designed to combine sharpness with thermal and abrasive wear resistance for consistent performance. Can this insert be used for interrupted cuts or variable conditions? Yes, the combination of the robust corner radius, stable cutting edge geometry and single‑sided chipbreaker makes the insert suitable for interrupted cuts and fluctuating machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com