DCMW 070204 AH330 Wendeplatten - Tungaloy
Product data inconsistent: the record lists the application as "milling" while the model series and description specify a turning family. This discrepancy could lead to confusion or errors in product categorisation and usage, so it is essential to carefully review the provided details to ensure accuracy. Please verify the product information thoroughly, cross-checking all relevant fields, and supply corrected data to align the application with the appropriate model series and description. Accurate and consistent product data is crucial for maintaining operational efficiency, preventing miscommunication, and ensuring that the product is correctly identified and utilised for its intended purpose.
DCMW 070204 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a 0.4 mm corner radius and a secure hole/counterbore fixing for reliable, productive machining; order the insert directly via Metav Werkzeuge or consult their advisors for application-specific recommendations. DCMW 070204 T5115 rhombic insert for milling by Tungaloy — CVD-coated carbide, 55° cutting angle DCMW 070204 T5115 is a rhombic insert designed for productive high-feed roughing in machining applications, suitable for use where consistent edge stability and wear resistance are required CVD-coated carbide for extended tool life Rhombic 07 geometry with 55° cutting angle Cylindrical hole with single-side countersink (40°–60°) 0.4 mm corner radius for robust edge support Productive high-feed roughing with predictable results The CVD-coated carbide grade T5115 provides a balanced combination of wear resistance and cutting-edge stability, making it well suited to demanding roughing tasks. Designed for applications that require high material removal rates, the insert’s rhombic 07 form and 55° cutting angle promote stable cutting forces and effective chip evacuation. This leads to reduced rework and more consistent cycle times on series components, helping workshops maintain throughput without compromising surface integrity. Durable edge geometry for consistent performance A 0.4 mm corner radius and a 7° clearance angle ensure durable edge support under heavy cuts, while the absence of a chipbreaker allows predictable chip formation in suitable set-ups. The plate thickness of 2.38 mm combined with the rhombic form increases the insert’s resistance to mechanical stresses during roughing. Such geometry is especially beneficial when machining cast iron and similar materials where a robust edge and stable chip formation are central to part quality and tool life. Secure mounting and straightforward tooling integration The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) for positive seating and repeatable clamping. The standard DCMW070204 designation and the match to the TurnTenFeed system family simplify holder selection and inventory management. Where compatibility checks are required, Metav Werkzeuge’s technical advisers can confirm the correct clamping type and seat for the application, enabling smooth integration into existing tooling kits and reducing set-up time. For application advice or to procure the DCMW 070204 T5115 insert from Tungaloy, please contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — to discuss material, feeds and speeds specific to the workpiece. Technical data Article number: 6862083 SKU: 6862083-Tungaloy Manufacturer SKU: TUN6862083 Designation: DCMW070204 Facts Corner radius: 0.4 mm Thickness: 2.38 mm Cutting angle: 55° Clearance angle: 7° Plate size: 07 Special features Material: carbide Coating: CVD-coated carbide (T5115) Plate form: rhombic Hole: with cylindrical hole and single-side countersink (40°–60°) Chipbreaker: without Intended use: productive high-feed roughing Model series: TurnTenFeed Suitable for machining: cast iron FAQ What materials is this insert optimised for? The DCMW 070204 T5115 insert is specified as a universal grade for cast iron, offering a balanced mix of wear resistance and edge stability suited to roughing operations. Is the insert compatible with standard rhombic 07 toolholders? Yes, the rhombic 07 form and central hole with countersink make the insert compatible with holders designed for DCMW-style plates; confirm holder seat and clamping style before fitting. Does the insert include a chipbreaker for controlled chips? This variant is supplied without a chipbreaker to allow predictable chip formation under stable clamping and cutting conditions. What is the recommended edge geometry for heavy roughing? The 0.4 mm corner radius and 7° clearance angle provide robust support for heavy cuts, improving resistance to mechanical edge chipping during high-feed passes. How can the TurnTenFeed series designation help with tooling selection? The TurnTenFeed model family indicates a focus on high-feed, productive machining; matching holders and inserts from the same series simplifies set-up and inventory management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMW 070208 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade optimised for cast iron, a versatile 55° geometry and ISO compatibility for a streamlined turning process; order or request application advice directly via Metav Werkzeuge. DCMW 070208 T5115 turning insert by Tungaloy The DCMW070208 T5115 is an ISO‑standard rhombic turning insert intended for external and internal turning, offering a universal grade for cast‑iron applications. ISO rhombic insert DCMW 070208 CVD‑coated carbide grade T5115 7° relief angle and 55° cutting edge Suitable for external and internal turning Reliable wear resistance for cast‑iron turning The T5115 grade is a CVD‑coated carbide formulation designed as a universal solution for machining cast iron, balancing wear resistance and cutting‑edge stability. This results in consistent tool life across a variety of cast‑iron alloys and typical turning tasks. The coating reduces adhesive wear and improves resistance to built‑up edge formation, which helps to maintain dimensional accuracy over longer production runs while keeping process costs predictable. ISO geometry and secure mounting for process stability As an ISO‑standard insert in rhombic form, compatibility with holders is governed by form, relief angle, tolerance class, fastening, size and thickness. The insert is supplied with a hole and a cylindrical hole plus a single‑sided countersink (40°–60°) for positive location and secure clamping. Specified dimensions such as 2.38 mm thickness and the 07 size enable fast replacement within established tooling systems, simplifying inventory and reducing changeover time. Geometry that supports consistent surface quality A 55° cutting edge and a 0.8 mm corner radius provide a good compromise between strength and finish, making the insert suitable for many general turning tasks. Note that the insert is supplied without chipbreaker, which allows flexibility in selecting the optimal chip control strategy—either by matching the insert with a holder equipped for chip control or by adapting cutting parameters. The combination of geometry and grade supports steady cutting forces and reliable surface integrity when the cutting data and clamping are correctly matched. Practical setup guidance and system considerations The insert functions as part of a system consisting of the ISO insert, a matching external holder or boring bar, a shim or clamp set and replacement screws. For best results in production, choose the chipbreaker style and holder rigidity appropriate to the operation, and set feeds and speeds to suit the T5115 grade and the specific cast‑iron type. If uncertainty exists about the correct holder or cutting data, specifying the DCMW070208 designation and the Tungaloy grade will speed up recommendations and ensure the selected setup meets productivity and quality targets. Contact Metav Werkzeuge for tailored application advice on this Tungaloy grade and to request availability or drawing‑specific recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6862098 Manufacturer SKU: TUN6862098 Model series: ISO turning inserts Manufacturer: Tungaloy Material: carbide Core data Insert designation: DCMW070208 ISO code: 070208 Insert form: rhombic Size: 07 Thickness: 2.38 mm Relief angle: 7° Cutting edge angle: 55° Corner radius: 0.8 mm Special features Grade/coating: T5115, CVD‑coated carbide Hole: with hole; cylindrical hole + single‑sided countersink (40°–60°) Chipbreaker: without chipbreaker Typical use: external and internal turning Application: machining cast iron FAQ What materials is this insert intended for? The Tungaloy DCMW070208 in grade T5115 is designed primarily for cast iron machining but can be used where the universal characteristics of the grade are appropriate. Does the insert include a chipbreaker for chip control? This insert is supplied without chipbreaker, allowing selection of chip control by holder design or cutting parameters appropriate to the operation. Which holders are compatible with the DCMW070208 insert? Compatibility depends on insert form, 7° relief angle, tolerance class, fastening style and the 2.38 mm thickness; matching an ISO rhombic external holder or boring bar is required. How does the CVD coating affect performance? The CVD‑coating on the carbide improves wear resistance and cutting‑edge stability, reducing adhesive wear and helping to maintain consistent tool life in cast‑iron turning. What does the 0.8 mm corner radius mean for finish and strength? A 0.8 mm corner radius provides a balance between edge strength and surface finish, suitable for many general turning tasks where moderate robustness and good finish are required. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DCMW 11T304 AH120 Wendeplatten - Tungaloy
Take advantage of high-feed performance and a wear-resistant PVD carbide grade for consistently productive roughing; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DCMW 11T304 AH120 turning insert – Tungaloy, PVD-coated carbide for high-feed roughing DCMW 11T304 AH120 is an indexable turning insert designed for high-feed, productive roughing in stable clamping setups. PVD-coated cemented carbide AH120 55° approach angle for robust cutting 0.4 mm corner radius for heavy cuts Rhombic 11 size with cylindrical hole Increase throughput with stable high-feed roughing The insert offers high-feed cutting capability that raises material removal rates without compromising process stability. The PVD-coated cemented carbide AH120 provides a sharp initial cutting edge and sustained wear resistance, which reduces downtime for insert changes. In practical terms, this means shorter cycle times in serial turning tasks and a more predictable production rhythm when machining under rigid clamping conditions. Reliable edge life and secure clamping for consistent results A 55° approach angle and robust geometry maintain a secure cutting edge against impact and chipping during aggressive roughing. The rhombic form and cylindrical hole with single-sided countersink (40°–60°) ensure repeatable seating and torque transmission in the toolholder, supporting stable cutting forces. The result is improved dimensional consistency across batches and fewer interrupted cycles due to edge failure. Simple specification for shop-floor decision making Key dimensions are compact and easy to verify: 0.4 mm corner radius, 3.97 mm plate thickness, and 11 mm plate size, which facilitate quick selection for common turning toolholders. The insert is supplied without a chipbreaker, favouring applications where free-flowing chips and heavy feeds are preferred. Specifying this grade helps planners match tool life expectations with machining strategy and minimises guesswork in process planning. Contact Metav Werkzeuge today for tailored advice on integrating the Tungaloy DCMW 11T304 AH120 turning insert (SKU TUN6810654) into high-feed turning applications and to arrange prompt supply Technical Data Article number: 6810654 Manufacturer SKU: TUN6810654 Brand: Tungaloy Model series: TurnTenFeed Facts Corner radius: 0.4 mm Relief angle: 7° Approach angle: 55° Plate thickness: 3.97 mm Plate size: 11 mm Special features PVD-coated cemented carbide (AH120) Rhombic plate geometry With cylindrical hole + single-sided countersink (40°–60°) No chipbreaker Designed for high-feed turning and productive roughing FAQ What applications suit this indexable insert best? The DCMW 11T304 AH120 turning insert is optimised for high-feed, productive roughing operations under stable clamping, providing strong material removal for serial turning tasks. Which material does the AH120 grade perform well on? The AH120 PVD-coated cemented carbide grade is developed for wear- and chipping-resistant performance in turning where a sharp cutting edge and process security are required. How does the insert secure in the holder? The rhombic plate features a cylindrical hole with a single-sided countersink (40°–60°) to ensure repeatable seating and reliable clamping in compatible toolholders. What are the key dimensions to check before ordering? Confirm the 0.4 mm corner radius, 3.97 mm plate thickness and 11 mm plate size to ensure compatibility with the selected turning toolholder and machining strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMW 11T304 AH330 Wendeplatten - Tungaloy
Benefit from the combination of reliable chip resistance and a sharp cutting edge for sustained high-feed roughing. The PVD-coated AH330 grade provides wear- and fracture-resistant performance while the rhombic geometry with a 55° approach angle ensures stable cutting engagement. Order the insert directly via Metav Werkzeuge or ask the consultants if needed. DCMW 11T304 AH330 — Rhombic Turning Insert for High-Feed Roughing (Tungaloy) A DCMW 11T304 AH330 rhombic insert engineered for productive high-feed turning applications under stable clamping conditions. PVD-coated AH330 for wear-resistant performance Optimised for high-feed rough turning Rhombic 11 mm size with 55° lead angle Cylindrical hole with single-sided countersink Built for fast, productive roughing Part of the TurnTenFeed series, the DCMW 11T304 AH330 insert is engineered for consistent metal removal in high-feed turning. The 55° approach angle and rhombic outline translate into a secure cutting engagement that supports higher material removal rates under stable clamping. With an 11 mm size and a 0.4 mm cutting-edge radius, the insert offers predictable wear patterns and stable component tolerances during extended roughing cycles, reducing vibration and limiting unplanned interruptions in production. Durable grade and coating that protect the cutting edge The PVD-coated carbide construction delivers a balance of hardness and toughness: abrasion resistance for long running times and resistance to chipping where a sharp cutting edge is required. This combination improves dimensional consistency across passes and reduces the frequency of tool indexing, contributing to improved process efficiency. The AH330 grade is optimised for applications that demand both a keen edge and reliable performance in demanding roughing operations. Practical design details that aid handling and clamping The rhombic plate form with a cylindrical hole and single-sided countersink (40°–60°) allows secure seating in standard indexable toolholders. Plate thickness of 3.97 mm and the absence of an integrated chipbreaker simplify selection of robust cutting data for heavy stock removal, while the 7° clearance angle protects the flank face. These design choices favour stable set-ups and predictable chip flow in heavy-duty turning tasks. For further technical data or specific application advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Selection guidance and economic rationale This insert is particularly suitable where a sharp cutting edge and process security are required simultaneously: high-feed rough turning under secure clamping is the primary use. Fewer interruptions from chipping and longer intervals between indexings translate into longer tool life and lower tooling cost per component. The Tungaloy development approach aims to deliver balanced performance that supports predictable production cycles and efficient shop-floor throughput. Contact Metav Werkzeuge for availability and technical advice on Tungaloy DCMW11T304 AH330 turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6810655 Manufacturer SKU: TUN6810655 Our SKU: 6810655-Tungaloy Series: TurnTenFeed Application: Turning Core dimensions Size: 11 mm Thickness: 3.97 mm Clearance angle: 7° Lead/approach angle: 55° Cutting edge radius: 0.4 mm Design and features Shape: Rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Grade/coating: AH330, PVD-coated carbide Chipbreaker: without Intended use: high-feed, productive roughing family FAQ What is the primary application of this insert? The DCMW11T304 AH330 insert is designed for high-feed, productive rough turning under stable clamping and forms part of the TurnTenFeed family. Which grade and coating does the insert feature? The insert uses the AH330 grade with a PVD layer on a carbide substrate to combine abrasion resistance and chipping resistance for demanding roughing tasks. Is a chipbreaker integrated in the plate? No — this plate is supplied without an integrated chipbreaker, which simplifies parameter selection for heavy stock removal. What are the key dimensions to consider when selecting a holder? Key dimensions are 11 mm size, 3.97 mm thickness, 0.4 mm cutting-edge radius, 55° lead angle and 7° clearance angle; the plate features a cylindrical hole with a single-sided countersink. Which toolholders and set-ups are recommended? Holders compatible with rhombic 11 mm plates and a secure clamping arrangement are recommended; the cylindrical hole with countersink ensures reliable seating and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMW 11T304 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of productive high-feed performance, CVD-coated carbide grade T5115, and robust 55° rhombic geometry for reliable roughing cycles; order the insert directly via Metav Werkzeuge or consult our experts for application support. DCMW 11T304 T5115 turning indexable insert — Tungaloy, 55° rhombic, 0.4 mm radius A DCMW 11T304 T5115 turning insert engineered for high-feed, productive roughing in stable clamping conditions within turning operations. TurnTenFeed family for high-feed roughing CVD-coated carbide grade T5115 Rhombic 55° geometry, 0.4 mm corner radius Designed for cast iron applications Productive high-feed roughing that reduces cycle times The TurnTenFeed series is developed for high-feed cutting and efficient roughing cycles. With a CVD-coated carbide grade T5115, the insert offers a balanced combination of wear resistance and cutting-edge stability that translates into longer effective tool life during interrupted cuts and heavy stock removal. In practical terms, this means fewer tool changes and more uptime on batch turning tasks when the set-up is rigid and secure. The coating’s characteristic improves thermal resistance and wear behaviour on cast iron, enabling stable performance across extended runs. Geometry tuned for consistent edge life and secure clamping A 55° rhombic geometry with a 0.4 mm corner radius and a 7° clearance angle provides a compromise between strength and accessibility: the geometry supports robust cutting edges for deep cuts while maintaining a controllable contact zone for predictable surface quality. The insert’s 3.97 mm thickness and central hole with a cylindrical seat plus single-sided countersink (40°–60°) ensure reliable seating in compatible holders, reducing micro-movements that can degrade edge life. For less experienced readers, the corner radius governs the balance between edge robustness and achievable surface finish, while the clearance angle prevents rubbing behind the edge during engagement. System approach and material versatility for practical workshop use Delivered as part of a system that includes holders, indexable plates and spare parts, the insert supports streamlined tool management. The universal nature of the T5115 grade makes it particularly appropriate for a wide range of cast iron machining tasks, providing stable chip formation and repeatable results. Without a dedicated chipbreaker, the insert relies on the combination of geometry and feed strategy for chip control; this favours applications where process parameters are consistent and clamping is rigid. The upshot for production planners is improved predictability and efficient material removal rates when pairing the insert with appropriate high-feed turning holders. For highly productive roughing with Tungaloy’s TurnTenFeed grade T5115, contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6862094 Manufacturer SKU: TUN6862094 Model series: TurnTenFeed Material: carbide Application: Turning Core specifications Insert designation: DCMW11T304 ISO code: 11T304 Grade: T5115 Shape/size: rhombic, size 11 Thickness: 3.97 mm Corner radius: 0.4 mm Lead/approach angle: 55° Relief/clearance angle: 7° Hole: with hole Hole style: cylindrical hole with single-sided countersink (40°–60°) Special features CVD-coated carbide grade No chipbreaker Designed for high-feed, productive roughing Suitable for cast iron machining System includes holders and spare parts compatibility FAQ What materials is this insert suited for? This insert is supplied in Tungaloy’s T5115 CVD-coated carbide grade and is optimised for machining cast iron, offering balanced wear resistance and cutting-edge stability. How does the 55° rhombic geometry affect machining? The 55° rhombic geometry provides a robust cutting edge for heavy cuts while maintaining accessibility for turning operations; the geometry supports stable cutting when clamping is rigid. Is there a chipbreaker on the insert? No, this indexable insert does not feature a chipbreaker; chip control is achieved through the combination of geometry, feed selection and stable clamping conditions. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius increases edge strength and is well suited to roughing; surface finish will be influenced by feed rate and cutting parameters, with finer radii typically yielding improved finish at the cost of edge robustness. Which holder types are compatible with this insert? The insert is intended for compatible high-feed turning holders that accept size 11 rhombic plates and a centrally clamped, countersunk seat as specified. How does the T5115 coating contribute to tool life? The CVD coating on grade T5115 enhances thermal and abrasive wear performance, supporting longer tool life and consistent performance in high-feed roughing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCMW 11T308 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide in grade T5115, ISO‑compliant geometry and a secure clamping design to ensure consistent, productive turning of cast iron components; order directly via Metav Werkzeuge or contact our consultants for application advice. DCMW 11T308 T5115 indexable insert for turning — Tungaloy DCMW11T308 T5115 is an ISO‑standard indexable insert for external and internal turning, optimised for cast iron machining and reliable production use ISO‑compatible rhombic insert for turning CVD‑coated carbide grade T5115 Secure clamping with cylindrical hole and countersink 0.8 mm corner radius for profile versatility Consistent fit and process reliability at scale The ISO geometry of this insert guarantees repeatable seating and compatibility across suitably rated holders; the insert's form, clearance angle and tolerance class determine fitment, while size and thickness ensure correct engagement. The consistent specification reduces setup variance and supports predictable tool change cycles. The DCMW11T308 designation identifies the rhombic shape and mounting hole style so workshop engineers can match the insert to existing toolholders quickly, improving machine uptime and production planning. Material and coating engineered for cast iron productivity The T5115 grade is a CVD‑coated carbide developed as a universal solution for cast iron, balancing wear resistance with edge robustness. Chemical vapour deposition (CVD) produces a hard, uniform coating that reduces abrasive wear during heavy interrupted cuts and extends tool life under continuous production. For users less familiar with coatings: CVD provides thermal and abrasion protection, lowering regrind frequency and contributing to fewer unplanned tool changes, which supports efficient machining cycles and cost control. Geometry and clamping deliver secure cuts and surface quality With a rhombic plate form, 0.8 mm radius and an included angle of 55°, the insert offers a useful compromise between strength and profiling capability. The 7° clearance angle and 3.97 mm plate thickness give mechanical stability for medium to heavy cutting parameters, while the cylindrical hole with one‑sided countersink (40°–60°) provides secure clamping and accurate repeatability. Together these features help maintain surface finish standards and reduce vibration during external and internal turning, translating into predictable component quality and less downstream rework. Contact Metav Werkzeuge for tailored selection guidance and secure genuine Tungaloy DCMW11T308 inserts for cast iron turning — email info@metav-werkzeuge.com or call +49 2822 7131930 for application support Technical data Article number: 6862105 SKU (manufacturer): TUN6862105 Manufacturer article number: 6862105 Dimensions & measurable data Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 11 Included angle: 55° Clearance angle: 7° Designs & special features Material: carbide Coating: CVD‑coated (grade T5115) Plate form: rhombic Hole: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: without Typical application: external and internal turning System composition: ISO insert, compatible external holder or boring bar, support plate/clamping set and replacement screws FAQ What materials is this insert intended for? The Tungaloy DCMW11T308 T5115 indexable insert is designed primarily for cast iron machining; the T5115 CVD‑coated carbide provides balanced wear resistance and edge stability for this material class. How does the insert secure to the holder? The insert uses a cylindrical hole with a single‑sided countersink (40°–60°) for reliable clamping; correct holder selection based on form, clearance angle and size ensures repeatable seating and clamping security. Which cutting tasks suit the 0.8 mm corner radius? A 0.8 mm radius is suitable for medium‑duty profiling and finishing passes where a balance between edge strength and contour fidelity is required, making the insert versatile for a range of turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DDJN L2020K Wendeplatten - Tungaloy
Take advantage of the ISO-compliant geometry and carbide substrate for consistent, productive turning. The combination of a 15° clearance angle and rhombic L2 form ensures repeatable mounting and reliable edge stability in external and internal turning. Order directly via Metav Werkzeuge or consult the team for selection support. DDJNL2020K — DDJN L2020K indexable insert for turning (Tungaloy) A DDJNL2020K indexable carbide insert designed for ISO‑compliant external and internal turning, offering a rhombic L2 geometry with a 15° clearance angle for stable cutting performance ISO‑compliant geometry L2020K Carbide substrate for long tool life Rhombic L2 form with 15° clearance Plate thickness 2.38 mm for rigidity Reliable cutting performance for productive turning operations The insert delivers consistent chip control and edge stability thanks to its carbide construction and ISO‑defined geometry. The L2020K coding denotes the standardised shape and tolerances, which facilitate predictable seating in ISO holders and simplify tool management across the shop. For turning applications, the rhombic L2 form provides two usable cutting corners and a moderate approach angle that balances strength and access in both external and internal passes. Explaining briefly: the clearance angle of 15° reduces rubbing and minimises workpiece friction, which helps to maintain machining stability and to extend tool life. Compatibility and selection guidance to reduce process risk Compatibility is determined by form, clearance angle, tolerance class, clamping and thickness; choosing a matching holder and correct tolerance class prevents seating errors and vibration. The insert’s 2.38 mm plate thickness and L2 size give a rigid interface with the toolholder, so machining parameters can be raised with confidence. For materials that demand robustness, the carbide substrate supports higher cutting speeds and sustained edge integrity. When selecting a grade or chipbreaker, match the insert to workpiece material and machining strategy; this indexable plate is supplied without a chipbreaker, so select a suitable grade or holder that complements chip evacuation for the intended task. Ease of integration and maintenance advantages Standardised ISO geometry and the absence of a hole simplify inventory and reduce assembly steps when changing inserts. The insert design supports rapid, repeatable index changes, keeping downtime to a minimum and contributing to a smoother production flow. Where surface finish or footprint is critical, the controlled cutting edge produced by the carbide substrate promotes consistent results part‑to‑part. For workshop planners, the ISO‑compliant nature of the insert allows straightforward cross‑reference with existing holders and clamping sets, reducing the need for special tooling. For machining reliability with Tungaloy inserts, contact Metav Werkzeuge for personalised application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6802934 Manufacturer SKU: TUN6802934 SKU: 6802934-Tungaloy Model series: ISO-Drehwendeschneidplatten WPL designation: DDJNL2020K ISO code: L2020K Facts Relief angle: 15° Main cutting edge angle: 55° Plate thickness: 2.38 mm Plate shape: rhombic (L2) Hole: none Special features Material: carbide Application: Drehen (turning) Chipbreaker: without System: ISO indexable turning plates; compatible with matching holders and clamping sets Typical use: external and internal turning; select appropriate grade to suit workpiece material FAQ What materials is this insert suitable for? The DDJNL2020K insert is a carbide plate intended for turning; suitability for specific workpiece materials depends on the chosen carbide grade, so select a grade matched to the material and machining strategy. How does the L2020K coding affect compatibility? The L2020K ISO code identifies the insert shape, size and tolerances; matching holders designed for L‑type inserts ensure correct seating and repeatable positioning for reliable turning operations. Is a chipbreaker integrated with this plate? This plate is supplied without a chipbreaker; chip control must be achieved by selecting a suitable grade, a compatible holder solution, or an external chipbreaking strategy for the machining task. Can this insert be used for internal turning as well as external turning? Yes, the rhombic L2 configuration and moderate approach angle make the insert suitable for both external and internal turning where access and edge strength are appropriate. Which SKU or article number identifies this item for ordering? Order using article number 6802934 or SKU 6802934‑Tungaloy to ensure the correct DDJNL2020K Tungaloy indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DDJN L2020K Wendeplatten - Tungaloy
Combine ISO‑standard compatibility, cemented carbide construction and a 15° relief angle for versatile, durable turning performance; order the insert directly via Metav Werkzeuge or contact our consultants for selection support. DDJN L2020K — Turning insert DDJNL2020K (Tungaloy), rhomboid, 15° relief The DDJNL2020K is an ISO‑standard rhomboid indexable insert developed for external and internal turning operations, offering multiple cutting edges and straightforward integration into ISO‑compliant tool systems. ISO‑standard rhomboid insert 15° relief angle for flexible turning Cemented carbide for reliable tool life 2.38 mm plate thickness, without hole Versatile ISO compatibility for reliable production The ISO‑standard designation and rhomboid geometry ensure broad compatibility with established turning holders. As an indexable insert, the plate benefits from multiple usable edges, which supports predictable tool changes and reduces setup time. The 55° included angle of the rhomboid form provides a balance between access in confined bores and cutting‑edge strength, while the ISO model series indicates conformity with common holder dimensions. Compatibility is determined by holder form, relief angle, tolerance class, fastening method, plate size and thickness, so selecting a matching clamping system is essential for stable cutting. Stable clamping and predictable performance in turning With a plate thickness of 2.38 mm and a configuration supplied without hole, this variant is intended for holders that use flank or clamp systems rather than central screws. The modest thickness contributes to consistent rigidity in typical turning tasks, while the absence of a hole simplifies the insert geometry and can reduce cost per edge. For operations requiring a chipformer, a different insert version with an integrated chipbreaker should be chosen to improve chip control; this specific type arrives without chipbreaker so is best applied where chip formation is manageable or external chip control systems are in place. Material choice and application benefits Manufactured from cemented carbide, the plate combines wear resistance with cutting‑edge stability suited to a wide range of turning actions. Cemented carbide provides a durable cutting edge that helps maintain dimensional accuracy across multiple indexed positions, supporting efficient batch production. The 15° relief angle offers clearance behind the cutting edge to reduce rubbing and heat generation, helping to preserve surface finish and insert life during continuous cycles. For best results, match the cutting grade and any optional chipformer to the workpiece material and machining strategy. Practical guidance for selection and use When integrating this insert into a production cell, note that the ISO code L2020K and the L2 size designation determine seat fit and allowable cutting parameters; ensure the chosen holder matches these dimensions. The plate’s rhomboid form allows several indexing options, which is economically advantageous for shops seeking long edge life and straightforward stock control. For tailored recommendations on holder pairing, cutting data or grade selection, technical consultation is available to ensure process stability and repeatable results. For application advice or to procure Tungaloy turning inserts such as the DDJNL2020K, contact Metav Werkzeuge for expert consultation or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6802935 SKU: 6802935-Tungaloy Manufacturer SKU: TUN6802935 Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Designation: DDJNL2020K Manufacturer: Tungaloy Core technical data Plate thickness: 2.38 mm Relief angle: 15° Included angle: 55° Size designation: L2 Special features Rhomboid plate form Without hole Without chipbreaker ISO designation: L2020K Suitable for external and internal turning Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness FAQ What turning operations is this insert suitable for? The DDJNL2020K insert is designed for both external and internal turning; its rhomboid shape and ISO dimensions support a range of commonplace lathe tasks. What does the ISO code L2020K indicate? The ISO designation L2020K refers to the insert’s standardised family and form; for this plate the code helps identify the correct holder seat, size and clamping requirements. How does the 15° relief angle influence machining? A 15° relief angle provides clearance behind the cutting edge to reduce rubbing and heat build‑up, contributing to improved surface finish and consistent cutting performance. Is a chipbreaker supplied with this insert? This specific variant is supplied without a chipbreaker; for enhanced chip control select an insert version that includes an appropriate chipformer. Which holder should be used with this insert? Holder selection must match the insert’s form, relief angle, tolerance class, fastening method, size (L2) and thickness (2.38 mm) to ensure secure clamping and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DDJN R2020K Wendeplatten - Tungaloy
Take advantage of a proven combination of ISO-standard geometry, carbide construction, and compact plate thickness for consistent turning performance; order the DDJNR2020K directly via Metav Werkzeuge or ask our consultants if needed. DDJNR2020K DDJN R2020K turning insert — Tungaloy, 15° clearance DDJNR2020K is an ISO-formatted carbide turning insert designed for external and internal turning applications, offering standardised fitment and predictable tool behaviour in ISO clamping systems. ISO-standard rhombic insert R2 Carbide body for stable cutting 15° clearance angle for precise geometry 2.38 mm plate thickness, no hole Consistent positioning and cutting geometry for repeatable results The insert is manufactured to ISO-standard dimensions so compatibility with ISO holders is reliable: positioning, tolerance class and fastening are standardised to ensure the cutting edge sits correctly every time. The 15° clearance angle maintains the intended rake and clearance geometry, reducing unwanted contact with the workpiece and improving process stability. For production environments that demand repeatability, a standardised insert form reduces setup variance and shortens changeover times. Material choice that balances performance and wear resistance Made from carbide, the insert offers high hardness and thermal resistance for aggressive turning operations while providing predictable wear behaviour. The moderate 2.38 mm plate thickness contributes to edge rigidity without excessive mass, supporting both finishing and light roughing tasks when matched with a suitable grade and chipformer. Selecting an appropriate carbide grade and chipbreaker tailored to the workpiece material will result in better surface quality and longer tool life. Straightforward integration into ISO turning systems The system design follows ISO conventions: the insert form, clearance angle, tolerance class, fixing method, size and thickness determine compatibility with toolholders. Because the insert uses a rhombic R2 format and is supplied without a hole and without a chipbreaker, it pairs with a range of external holders or boring bars that accept this geometry. This makes retrofitting into existing tool inventories simple and minimizes the need for new holder investment. Application guidance and process optimisation The insert is suitable for turning operations where a rhombic edge form is advantageous; typical tasks include external profiling and internal turning where a compact corner radius is required. Note that this variant has no chipbreaker, so choosing the right chipformer or an alternative grade will be essential when machining ductile or long-chipping materials. For process advice on grade selection, coolant strategy or recommended cutting parameters, specialist consultation is available to align insert selection with productivity and surface finish targets. For proven ISO turning performance with reliable carbide construction, request the DDJNR2020K from Tungaloy through Metav Werkzeuge for tailored grade and chipformer recommendations and prompt supply Technical data Article number: 6802943 Manufacturer SKU: TUN6802943 Model series: ISO turning inserts Material: Carbide Designation: DDJNR2020K Facts Included angle: 55° Clearance angle: 15° Plate thickness: 2.38 mm Plate size: R2 Special features ISO-standard rhombic format No chipbreaker Without hole Compatible with ISO holders Application: turning FAQ What materials can be machined with this insert? The DDJNR2020K is a carbide turning insert suitable for a wide range of materials; selecting the correct carbide grade and chipformer will determine optimal performance for aluminium, steel or other alloys. Does the insert require a specific holder type? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic R2 form fits standard ISO holders designed for this geometry. Is there a chipbreaker included on the insert? This variant is supplied without a chipbreaker; a separate chipformer or a different grade with integrated chip control should be selected for materials prone to long chips. What does R2020K indicate? R2020K is the ISO-related code for the insert form and tolerance family; it clarifies the insert’s geometry and ensures matching with ISO-compliant holders. What support is available for selecting the right grade and cutting data? Technical guidance on grade selection, chip control and cutting parameters is available; Metav Werkzeuge can advise on matching the DDJNR2020K to specific workpiece materials and machining tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DDJN R2020K Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, carbide construction and a 15° clearance angle for stable, repeatable turning operations; order directly through Metav Werkzeuge or request guidance from our technical consultants. DDJN R2020K Tungaloy turning insert — rhombic R2, 15° clearance DDJNR2020K is an ISO-standard rhombic turning insert designed for external and internal turning applications, offering robust carbide performance for reliable chip control and repeatable results ISO-standard geometry for universal turning Carbide substrate for long tool life Rhombic R2 form for versatile facing and turning 15° clearance angle for secure cutting engagement Consistent machining through ISO conformity and carbide durability The ISO-standard design ensures interchangeability across matched toolholders and systems, reducing set-up time and inventory complexity. Manufactured from carbide, the insert delivers high wear resistance and predictable tool life in continuous production. This combination of standardised geometry and a wear-resistant substrate supports higher spindle utilisation and lower downtime, which translates into measurable process efficiency for precision turning tasks. Secure seating and predictable cutting with rhombic geometry The rhombic R2 form and 15° clearance angle provide a stable cutting geometry that improves engagement and supports a range of turning operations. With a plate thickness of 2.38 mm, the insert offers sufficient rigidity for both finishing and light roughing, while the absence of a central hole simplifies the clamping approach for certain holder types. Compatibility depends on holder shape, relief angle, tolerance class, fastening method, size and thickness; once matched correctly, the system delivers consistent cutting forces and surface finish. Application guidance: selecting grade and system components This ISO-series insert is intended for turning; select the appropriate chipbreaker and grade to match the workpiece material and machining conditions, since this variant is supplied without a chipbreaker. Typical system setup comprises the insert, a matching external holder or boring bar, a clamp or clamp set and replacement screws. For tasks requiring specific edge strength or coating, choose grades and coatings that balance surface finish and lifetime. If clarification is needed on grade selection or holder pairing, technical guidance is available to ensure optimal performance. Contact Metav Werkzeuge today to specify the right Tungaloy DDJNR2020K insert for the application or to arrange a tailored recommendation based on material and cycle time requirements Technical data Article number: 6802942 Manufacturer SKU: TUN6802942 SKU: 6802942-Tungaloy Manufacturer: Tungaloy Facts Material: Carbide Model series: ISO-Drehwendeschneidplatten Application: Turning Insert designation: DDJNR2020K Thickness: 2.38 mm Clearance angle: 15° Angle: 55° Special features Rhombic plate form (R2) No central hole ISO-standardised insert Supplied without chipbreaker FAQ What turning tasks is this insert best suited to? This DDJNR2020K Tungaloy turning insert is intended for external and internal turning operations, offering a balance between rigidity and versatility for facing and finishing work. How does the ISO standard benefit workshop logistics? ISO-standard geometry simplifies holder interchangeability and inventory management, allowing the DDJNR2020K insert to be used across compatible toolholders with predictable fit and repeatability. Is a chipbreaker included with this variant? The DDJNR2020K is supplied without a chipbreaker; choose a matching chipbreaker or grade depending on the workpiece material and turning strategy. What components are needed to assemble a working system? A complete system requires the DDJNR2020K insert, a compatible external holder or boring bar, the correct clamp or clamp set and replacement screws to guarantee secure clamping and reliable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DDQN L2020K Wendeplatten - Tungaloy
Benefit from precise, ISO‑compliant tooling and robust carbide construction to maintain stable production in turning operations; order the DDQNL2020K insert directly via Metav Werkzeuge or consult our application specialists for tailored advice. DDQN L2020K turning insert by Tungaloy — carbide, 15° relief DDQNL2020K is an ISO‑standard rhombic carbide insert designed for external and internal turning, compatible with holders that match form, clearance angle, tolerance class, fastening, size and thickness ISO‑standard rhombic insert, size L2 Carbide grade construction, reliable wear resistance 15° relief angle for versatile turning Thickness 2.38 mm, no central hole Consistent fit for reliable machining results The insert is manufactured to ISO tolerances so it mates predictably with standard external holders and boring bars; compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness. This standardisation reduces setup time, limits machining variation and supports repeatable component quality. The rhombic geometry and specified dimensions enable straightforward replacement and predictable seating in compatible toolholders, helping to maintain cycle times and lower the risk of unplanned downtime. Geometry optimised for stability and surface quality A defined 15° relief combined with the rhombic form provides a balance between cutting edge strength and accessibility for finishing passes. The 2.38 mm plate thickness contributes to edge support during heavier cuts, while the lack of a central hole simplifies seating options in many clamping systems. Together, these characteristics support stable chip formation and improved surface finish in both external and internal turning, particularly when the correct chipbreaker and grade are selected for the workpiece material. Practical selection and process guidance for efficient turning Select the chipbreaker and grade according to workpiece material and machining conditions to unlock productivity benefits: the right combination reduces machining forces and extends edge life. For general turning applications, choose a grade and chipformer matched to the workpiece to benefit from predictable tool life and consistent component tolerances. If material compatibility or process windows are unclear, the insert's ISO designation and measured parameters provide a reliable basis for optimisation and tool exchange strategies within a production environment. For specification support or to discuss the DDQNL2020K turning insert for a specific application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange application advice and availability Technical Data Article number: 6802951 Manufacturer SKU: TUN6802951 Label: DDQNL2020K Tungaloy‑Wendeplatte Facts Relief angle: 15° Geometry angle: 55° Plate thickness: 2.38 mm Size: L2 Special features Material: carbide ISO series: ISO‑Drehwendeschneidplatten Plate form: rhombic Hole: without hole Typical application: external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What holder characteristics must match for correct fit? Correct seating requires matching the holder's seat form, clearance (free) angle, tolerance class, fastening method, size and plate thickness; these determine compatibility with the DDQNL2020K insert. Is the insert suitable for internal turning as well as external turning? Yes, the insert is designed for both external and internal turning operations when used with an appropriate holder and chosen chipbreaker or grade. What does the 15° relief mean for machining? A 15° relief reduces rubbing behind the cutting edge, helping to lower cutting forces and improve surface finish while maintaining edge support for stable cuts with the DDQNL2020K. Which materials can be machined with this type of insert? Material suitability depends on the selected grade and chipformer; the DDQNL2020K body is carbide and allows a broad material coverage when combined with the correct grade and chipbreaker. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DDQN L2020K Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, solid carbide construction and a compact 2.38 mm thickness for consistent turning performance and simplified tool matching; order the inserts directly via Metav Werkzeuge or consult our technical team for holder compatibility. DDQNL2020K ISO turning insert, rhombic L2, 15° relief angle — Tungaloy DDQNL2020K is an ISO‑standard rhombic turning insert designed for versatile external and internal turning applications in production environments ISO‑standard rhombic insert L2 15° relief angle for general turning Solid carbide for edge stability No hole design for stable clamping Reliable geometry for consistent turning results The DDQNL2020K insert is manufactured to ISO norms and offers a rhombic L2 form with an included angle of 55°, delivering predictable cutting kinematics for many turning tasks. The 15° relief angle reduces rubbing at the flank face and supports a reliable shear plane, while the solid carbide substrate ensures wear resistance and repeatable edge life. These characteristics translate into steadier part tolerances and reduced rework rates in batch production. Clear guidance on compatibility and clamping benefits Compatibility with toolholders depends on form, relief angle, tolerance class, fastening, size and thickness; the insert’s no hole configuration requires a matching seat and clamp on the holder for secure fixation. Choosing a holder rated for rhombic L2 inserts avoids misalignment and supports stable machining. The absence of a chipbreaker on this grade keeps the cutting edge simple and predictable; select an appropriate chip control solution based on workpiece stability and material. Application focus and selection advice Engineered for turning, this ISO series covers both external and internal operations — the insert performs well when the correct chipbreaker and grade are chosen to suit the workpiece and machining parameters. The solid carbide construction is favourable where dimensional consistency and edge strength are required. For process optimisation, match cutting data and coolant strategy to the component material and machine rigidity to exploit the insert’s potential without unnecessary tool wear. Contact Metav Werkzeuge for expert advice on holder selection and availability of Tungaloy inserts — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: 6802952 Manufacturer article number: 6802952 Manufacturer SKU: TUN6802952 Model series: ISO‑Drehwendeschneidplatten Label: DDQNL2020K Tungaloy‑Wendeplatte Core specifications Thickness: 2.38 mm Relief angle: 15° Included angle: 55° Shape: Rhombic L2 Hole: without hole Features and compatibility Material: carbide Designed for: turning (external and internal) Chipbreaker: without ISO‑standard geometry Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What applications is this insert suited for? The DDQNL2020K insert from Tungaloy is intended for external and internal turning, offering a rhombic L2 geometry suited to a wide range of turning operations. How does the no‑hole design affect clamping? A no‑hole configuration requires a compatible seat and clamping system on the holder to ensure the DDQNL2020K insert is held securely for stable cutting. Which materials should be considered when selecting this insert? Select the chipbreaker and grade to match the component material and machining stability; the carbide substrate of the DDQNL2020K provides edge strength for demanding turning tasks. What are the key dimensions to check for holder compatibility? Verify the shape (rhombic L2), thickness (2.38 mm), relief angle (15°) and included angle (55°) against the holder specification to ensure correct fit and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DDQN R2020K Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard compatibility, cemented carbide construction and a compact rhombic geometry to maintain stable cutting conditions and predictable tool life; order the insert directly via Metav Werkzeuge or consult our technical advisers for selection support. DDQN R2020K ISO turning insert — rhombic, 55° cutting geometry, Tungaloy The DDQN R2020K is an ISO‑standard rhombic turning insert designed for external and internal turning, compatible with holders that match its form, clearance and dimensional tolerances. ISO‑standard rhombic insert R2020K Solid carbide grade for long tool life 15° clearance angle, 55° cutting geometry Compatible with standard turning holders Engineered to deliver consistent turning results The DDQNR2020K insert is manufactured from cemented carbide to provide a reliable balance of toughness and wear resistance. Its rhombic geometry and 55° approach angle allow for versatile machining of external and internal profiles while maintaining a compact cutting edge suited to medium‑duty operations. The 15° clearance angle reduces rubbing and helps to preserve surface finish, making the insert appropriate for operations where dimensional consistency and low vibration are required. The ISO‑based designation ensures straightforward replacement and comparability across standard toolholder systems. Simple integration with widely used holder systems Compatibility is ensured by matching form, clearance, tolerance class, fixation method, size and thickness; the insert is intended to be used as part of a system consisting of the ISO turning insert, a suitable external holder or boring bar, an underlay/clamping set and spare screws. The version supplied has no chipbreaker and no hole, which favours applications where a uninterrupted cutting edge is preferred and chip control is managed by cutting parameters and machine stability. This configuration is particularly effective in stable setups and when paired with holders designed for rhombic inserts. A dependable choice for productive workshops Specifically selected for routine and repeatable turning tasks, the plate offers predictable wear behaviour and contributes to reduced tool change frequency when properly matched to workpiece material and machining conditions. The robust carbide grade supports steady performance under standard cutting speeds, while the ISO conformity aids inventory management and rapid replacement. Together, these factors support improved uptime and a consistent surface quality, aligning with shopfloor aims for higher productivity and repeatable results. Contact Metav Werkzeuge for tailored advice on Tungaloy cemented carbide turning inserts and compatibility checks — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6802960 Manufacturer SKU: TUN6802960 SKU: 6802960-Tungaloy Manufacturer: Tungaloy Facts Plate thickness: 2.38 mm Clearance angle: 15° Cutting geometry angle: 55° Size: R2 Special features Rhombic plate form No chipbreaker Without hole Cemented carbide material ISO turning insert series Suitable for external and internal turning System components: insert, holder/boring bar, underlay/clamping set, spare screws FAQ What applications suit this insert best? The DDQNR2020K turning insert is suitable for external and internal turning tasks where a rhombic geometry and a 55° approach angle are required, and where chip control can be achieved through process parameters. Is the insert compatible with standard holders? Compatibility depends on matching form, clearance, tolerance, fastening, size and thickness; the DDQNR2020K is ISO‑standardised to facilitate use with standard holders when these criteria are met. Does the insert have a chipbreaker or fixing hole? This variant is supplied without a chipbreaker and without a hole, so holders and cutting conditions should be selected accordingly to manage chips and clamping. Which material is the insert made from and what does that mean for wear? The insert is produced from cemented carbide, offering a balance of hardness and toughness that supports good wear resistance and stable edge retention under typical turning conditions. How is the insert identified for ordering or stock control? Refer to the manufacturer article number 6802960 or the manufacturer SKU TUN6802960 when ordering the DDQNR2020K insert to ensure an exact match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DDQN R2020K Wendeplatten - Tungaloy
Benefit from ISO conformity, robust carbide construction and a 15° clearance for dependable turning results; order the (DDQNR2020K Tungaloy insert) directly via (Metav Werkzeuge) or ask our consultants if needed. DDQN R2020K rhombic turning insert, 15° clearance — Tungaloy DDQN R2020K is an ISO‑standard rhombic insert engineered for reliable external and internal turning in general workshop and production environments. *ISO-standard rhombic insert *15° clearance angle for reliable chip flow *Carbide grade for stable wear resistance *Compatible with standard holders and clamps High‑precision geometry for consistent process security The rhombic design with a 55° included angle and a 15° clearance provides a predictable cutting geometry that supports stable tool engagement. ISO standardisation ensures repeatable fitment and interchangeability with holders that match form, tolerance class, fastening and thickness. This process‑oriented geometry reduces setup variability and contributes to consistent surface quality during both light finishing and heavier roughing passes. Clear guidance on holder compatibility and selection Compatibility depends on form, relief angle, tolerance and fastening. The insert is supplied without a chipbreaker, which allows selection of an appropriate chip control solution based on the workpiece material and cutting conditions. For external and internal turning, choose a holder whose seat matches the rhombic form and the R2 size; correct seating and clamp torque maintain cutting edge position and reduce vibration, which in turn extends insert life and improves dimensional repeatability. Durable carbide construction and application range Manufactured from carbide, the insert combines hardness and toughness for extended tool life in turning operations. The 2.38 mm plate thickness and R2 size are suited to many standard turning tasks where compact insert geometry is required. The ISO‑rated series supports a wide range of steels and non‑ferrous materials when paired with the matching grade; selecting the correct grade and cutting data enables efficient material removal while maintaining edge stability and surface finish. The DDQNR2020K designation identifies the plate geometry and system compatibility for straightforward toolroom integration. Contact Metav Werkzeuge for technical matching, holder recommendations and to confirm the correct carbide grade; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6802959 Manufacturer SKU: TUN6802959 SKU: 6802959-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Insert designation: DDQNR2020K Plate form: rhombic Plate size: R2 Thickness: 2.38 mm Clearance angle: 15° Included angle: 55° Special features Material: carbide Chipbreaker: no chipbreaker Hole: no hole Application: turning FAQ What materials can this insert machine effectively? The DDQNR2020K Tungaloy insert is a carbide insert intended for turning; pairing it with the correct grade allows machining of a broad range of materials typically encountered in turning operations. Is a chipbreaker included with the insert? No, the insert is supplied without a chipbreaker; the absence of a built‑in chip former enables selection of a chip control solution tailored to the workpiece material and cutting strategy. How should the insert be matched to a holder? Match the rhombic form, R2 size, 15° clearance and plate thickness to a compatible holder; correct seating, clamp set‑up and tolerance class ensure positional accuracy and repeatable performance with the DDQNR2020K Tungaloy insert. What are the physical dimensions relevant for fixture planning? Key dimensions are the plate thickness of 2.38 mm, plate form R2 and the 55° included angle; these values define seat and clamp requirements for compatible turning holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DGIM 2-020- AH7025 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability and ISO conformity for consistent turning performance; the wear- and fracture-resistant AH7025 grade supports process security and longer tool life. Order the insert directly via Metav Werkzeuge or request application-specific advice from the technical team. DGIM 2-020- AH7025 indexable insert for turning — Tungaloy, 55° cutting geometry DGIM2-020- AH7025 is an ISO-standard indexable insert designed for general turning applications where a sharp cutting edge and secure process behaviour are required ISO-standard indexable insert PVD-coated carbide AH7025 Rhombic 55° geometry One-sided chipbreaker Cylindrical hole for secure clamping Consistent performance through a wear-resistant grade The AH7025 grade combines a PVD-coated carbide substrate with a surface treatment designed for resistance to both abrasive wear and chipping. This results in predictable tool life and stable cutting forces during repetitive production runs, which supports tighter tolerances and fewer unplanned stops. For manufacturers focused on cycle-time reliability, the wear properties translate directly into lower tooling consumption and steadier part quality. ISO conformity simplifies tool selection and inventory Placed in the ISO turning insert family, the DGIM designation indicates compatibility with standard clamping systems when the insert’s form, relief angle 30°, tolerance class, fastening, size and thickness match the holder. This standardisation reduces the need for bespoke tooling and eases logistics across multiple lathes. For production planners, ISO conformity offers a clear basis for selecting replacement inserts and streamlining spare parts management. Geometry and clamping features that aid machining The rhombic shape with a 55° cutting angle yields a versatile approach angle suited to external and internal turning applications, while the cylindrical hole and central fastening enable simple, reproducible clamping. The one-sided chipbreaker steers chip formation under common cutting conditions, lowering risk of re-cutting and improving surface finish. These design aspects combine to reduce set-up time and support consistent part quality across shifts. Practical selection guidance for stable machining Choosing the correct chipbreaker and insert variant should be governed by workpiece material, machining stability and desired surface finish. The AH7025 variant is particularly suitable where a sharp cutting edge and process security are priorities; in less stable setups, a more robust geometry or a different chip control may be preferable. Consider holder rigidity and cutting parameters as primary factors when pairing the insert with an external holder or boring bar. Integration and application in production workflows The insert is intended for straightforward integration into an indexable system: an ISO-standard holder, appropriate shim and clamping set, plus replacement screws form the complete system. When compatibility checks confirm matching form, clearance angle and size, the component becomes a repeatable element in the toolroom inventory. The result is a reliable machining step that supports throughput and reproducibility in turning operations. For application-specific recommendations on the Tungaloy DGIM2-020- AH7025 indexable insert and to arrange immediate supply from Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and fast delivery. Technical data Article number: 6774854 SKU: 6774854-Tungaloy Manufacturer SKU: TUN6774854 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Cutting angle: 55° Relief angle: 30° ISO code: 2-020- Insert size: 2- Hole: cylindrical hole Special features PVD-coated carbide grade AH7025 Rhombic insert shape One-sided chipbreaker Designed for external and internal turning ISO-standardised geometry for holder compatibility Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The DGIM2-020- AH7025 insert is specified as a wear- and fracture-resistant PVD-coated carbide grade for turning tasks; it is chosen when a sharp cutting edge and stable process behaviour are required. How is compatibility with a toolholder determined? Compatibility depends on the insert form, relief angle (30°), tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and correct cutting geometry. What benefits does the AH7025 coating provide? The AH7025 PVD treatment improves resistance to abrasive wear and reduces the likelihood of edge chipping, which supports predictable tool life and consistent surface finish in repetitive turning operations. Can the insert be used for both external and internal turning? Yes, the rhombic 55° geometry and central cylindrical hole make the insert suitable for both external and internal turning applications when used with an appropriate holder. How does the chipbreaker affect machining results? The single-sided chipbreaker controls chip formation under typical turning conditions, improving chip evacuation, reducing the risk of re-cutting and assisting in achieving desired surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DGIM 2-020- AH725 Wendeplatten - Tungaloy
Combining the PVD-coated AH725 grade, ISO rhombic geometry and a 30° clearance, this insert delivers consistent chip control and process security for a wide range of steel and stainless-steel turning tasks. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. DGIM 2-020- AH725 — ISO rhombic turning insert, 55° by Tungaloy The DGIM 2-020- AH725 is an ISO-standard rhombic indexable turning insert designed for both external and internal turning on steel and stainless steels. PVD-coated carbide grade AH725 for broad materials compatibility ISO rhombic 55° geometry with cylindrical hole 30° clearance angle for reliable cutting stability Single-sided chipbreaker for controlled chip formation Consistent cutting performance for reliable production The insert is engineered to provide stable cutting and repeatable results in production environments. The PVD-coated cemented carbide ensures wear resistance and temperature stability during interrupted cuts and variable feed conditions, which leads to longer tool life and fewer index changes. This translates into higher process efficiency and reduced machine downtime when turning medium and high-strength steels or stainless steels, as the coating improves edge integrity under mixed cutting regimes. Clear selection criteria to ensure holder compatibility Compatibility with a toolholder depends on geometry, clearance angle, tolerance class, fastening method, size and thickness; these parameters determine a secure fit and correct rake/relief relationships. The rhombic 55° geometry and the insert’s cylindrical hole are standardised to ISO dimensions, allowing selection of the matching external holder or boring bar with confidence. Choosing the appropriate chipbreaker and the AH725 grade for the specific workpiece material offers the practical benefit of predictable chip control and stable forces during turning. Process security and material flexibility with AH725 The AH725 grade is a universal, breakage-resistant option optimised for mixed-material shops and smaller tools where reliable performance is critical. With a single-sided chipbreaker and a 30° clearance angle, the insert is suitable for a broad spectrum of turning operations while maintaining surface quality and dimensional stability. The combination of substrate and PVD coating supports consistent tool life, which improves cost-efficiency per component and reduces setup variation between batches. For fast supply and technical advice on optimising tool selection with Tungaloy AH725 inserts, contact Metav Werkzeuge — experienced consultants are available to assist with holder matching and process recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6720657 Manufacturer article number: 6720657 Manufacturer SKU: TUN6720657 SKU: 6720657-Tungaloy Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts ISO code: 2-020- Size designation: 2- Geometry angle: 55° Clearance angle: 30° Special features PVD-coated cemented carbide (AH725) Rhombic insert with cylindrical hole Single-sided chipbreaker Intended use: Turning — external and internal turning FAQ What materials is this insert suitable for? The DGIM 2-020- AH725 insert from Tungaloy is intended primarily for steel and stainless steels and offers universal performance for varying workpiece materials. How does the AH725 grade improve process security? AH725’s PVD-coated cemented carbide substrate on the DGIM 2-020- insert provides wear resistance and fracture toughness, enabling consistent cutting performance and reduced risk of unexpected edge failure. Which holder characteristics must be checked before fitting the insert? Ensure the holder matches the ISO geometry, clearance angle (30°), hole type (cylindrical) and the insert size code (2-) to achieve correct seating and clamping for safe turning operations. Can this insert be used for both external and internal turning? Yes — the rhombic form and standardised ISO dimensions make the DGIM 2-020- AH725 suitable for both external and internal turning applications. What advantage does the single-sided chipbreaker give? A single-sided chipbreaker on this insert supports predictable chip formation and evacuation, improving surface finish and reducing the chance of chip entanglement during continuous turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DGIM 2-020- GH130 Wendeplatten - Tungaloy
Take advantage of the GH130 wear-resistance and the ISO-compliant rhombic 55° geometry for consistent turning performance; compatible with standard holders thanks to the 30° clearance and cylindrical mounting hole. Orderable via Metav Werkzeuge or consult our advisors for application matching. DGIM 2-020- GH130 Tungaloy turning insert — rhombic 55° geometry, 30° clearance A DGIM2-020- GH130 Tungaloy insert engineered for external and internal turning, suitable for ISO-compatible toolholders and a wide range of steel and alloy turning tasks GH130 wear-resistant grade Rhombic 55° geometry 30° clearance angle Cylindrical hole, single-sided chipbreaker Reliable cutting performance for stable turning cycles The combination of the GH130 cutting grade and a carbide substrate provides a balanced mix of wear resistance and edge strength that supports repeatable turning operations. This geometry reduces flank wear and extends the effective tool life, which in turn lowers the need for frequent insert changes and helps to maintain machining quality across series production. The construction is optimised for steady cutting conditions and improved process reliability. Compatibility with ISO holders and simple clamping checks Designed to the ISO series for indexable turning inserts, the rhombic 55° geometry and the cylindrical hole ensure compatibility with standard clamping systems; holder matching depends on form, clearance, tolerance class, fastening, size and thickness. The 30° clearance contributes to reduced rubbing on the flank and improved surface finish; users benefit from straightforward verification of fit and secure mounting, resulting in lower set-up times and predictable tool behaviour. Practical advantages from a single-sided chipbreaker The single-sided chipbreaker is tuned to support controlled chip formation in typical external and internal turning tasks, reducing the risk of entanglement and improving evacuation in through-cut and interrupted cuts. Fewer erratic chip events mean better process control and a higher probability of achieving target tolerances with fewer rework cycles. This characteristic makes the insert a sound choice where chip management and consistent surface quality are priorities. Application scope and material suitability The insert is intended for turning and is compatible with a broad spectrum of common engineering materials when the appropriate chipbreaker and grade are selected. The carbide construction with the GH130 grade lends itself particularly well to general steel turning and alloyed steels, supporting productive cutting parameters and helping to maintain dimensional stability during longer runs. For specific material mixes or harder alloys, selection of geometry and machining parameters should be coordinated with technical advisors. If there is uncertainty about fit, application or cutting data, technical guidance and supplementary data are available; contact details are provided for assistance: info@metav-werkzeuge.com, +49 2822 7131930. Contact Metav Werkzeuge for application-specific advice, availability of Tungaloy inserts and compatible holders to secure optimum turning performance Technical data Article number: 6720658 Manufacturer SKU: TUN6720658 Model series: ISO turning inserts Name: DGIM2-020- GH130 Tungaloy insert Manufacturer: Tungaloy Facts Geometry angle: 55° Clearance (relief) angle: 30° Size designation: 2- ISO code: 2-020- Hole: with hole (cylindrical) Special features Carbide material GH130 cutting grade Rhombic insert shape Single-sided chipbreaker Cylindrical hole for secure clamping ISO-compatible indexable insert FAQ What is the primary application for this insert? The DGIM2-020- GH130 Tungaloy insert is intended for external and internal turning in ISO-compatible setups and is designed to work with standard holders that match its form and size. Which materials suit the GH130 grade best? The GH130 grade is optimised for a broad range of steels and alloyed steels; the carbide substrate and grade balance wear resistance and edge stability for general turning tasks. How does the rhombic 55° geometry affect machining? A rhombic 55° geometry delivers a compromise of strength and accessibility for profiling and finishing, allowing reliable cutting forces and good surface quality in turning operations. Is the insert compatible with my holder? Compatibility depends on form, clearance, tolerance class, fastening, size and thickness; the cylindrical hole and ISO designation facilitate matching to standard holders, but holder verification is recommended. What benefits does the single-sided chipbreaker offer? The single-sided chipbreaker supports controlled chip formation and evacuation, which reduces entanglement risk and improves process stability during continuous or interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DGIM 2-020- NS9530 Wendeplatten - Tungaloy
Data conflict detected: the cutting grade is specified as "uncoated cermet" while the tool is elsewhere described as "carbide". These specifications are inconsistent; please verify the product data before a full product description is produced, as such discrepancies can lead to confusion or errors in the manufacturing process, potentially affecting tool performance, material compatibility, and overall operational efficiency, which is why it is crucial to ensure that all product details, including material composition, cutting grade, and intended application, are accurately aligned and verified prior to finalising the documentation or proceeding with any further steps in the production or procurement workflow.
DGIM 2-020- T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9225, ISO compatibility and a robust single-sided chipbreaker for reliable medium to heavy steel turning; the result is stable chip control and longer tool life. Order the insert directly via Metav Werkzeuge or consult the technical advisors for process integration. DGIM 2-020- T9225 — Tungaloy indexable turning insert, ISO 2-020-, for turning The DGIM2-020- T9225 is an ISO-series indexable insert engineered for external and internal turning operations, offering a rhombic geometry and a robust grade tailored to variable cutting conditions. CVD-coated carbide grade T9225 Universal grade for medium to heavy steel turning ISO DGIM form, rhombic 55° geometry Single-sided chipbreaker with cylindrical hole Stable performance for medium to heavy steel turning The CVD-coated carbide construction of this insert delivers improved wear resistance and a consistent cutting edge under fluctuating conditions. The T9225 grade is formulated as a robust universal solution, giving higher toughness for slightly interrupted cuts and variable engagement depths. In practice, this means fewer insert changes, extended machining intervals and a more predictable production flow, with the coating reducing flank wear and the substrate maintaining edge stability under higher cutting forces. Geometry and clamping that reduce vibration and improve surface finish The rhombic DGIM form with a 55° included angle and 30° clearance provides a balanced combination of strength and accessibility for both external and internal operations. The single-sided chipbreaker promotes controlled chip formation on the selected side, while the cylindrical hole allows secure screw clamping in standard ISO holders. Together, these features reduce vibration, support repeatable seating in the pocket and contribute to a finer surface finish on machined components when paired with a suitable holder and stable setup. System-level compatibility and selection guidance As an ISO-series insert, compatibility is determined by form, relief angle, tolerance class, mounting, size and thickness. The insert is intended to be used with a matching external holder or boring bar, plus a support shim and clamp set with replacement screws. For best results in steel turning, select the chipbreaker and insert grade to match the material, cutting mode and machine stability; the robust T9225 grade is particularly suited to jobs where occasional interruptions or varying engagement require added toughness rather than the highest possible hardness. Operational benefits and workshop advantages Adopting this ISO insert reduces tooling complexity by aligning with standard insert pockets and screw mounting, enabling quick index changes and straightforward stock management. The combination of a coated grade and proven geometry supports reliable tool life and consistent part quality, which in turn lowers production interruptions and contributes to overall machining economy. Maintenance is simplified because the insert form and hole style conform to established ISO norms, making replacements and spares easy to manage across multiple machines. Contact Metav Werkzeuge for application advice, availability and guidance on integrating the Tungaloy DGIM2-020- T9225 indexable insert into machining processes Technical Data Article number: 6781374 Manufacturer SKU: TUN6781374 SKU: 6781374-Tungaloy Manufacturer: Tungaloy Model series: ISO-series indexable turning inserts Facts ISO code: 2-020- Size designation: 2- Relief/clearance angle: 30° Included angle: 55° Hole: with cylindrical hole Special features CVD-coated carbide grade T9225 Robust universal grade for medium to heavy steel machining Rhombic geometry (DGIM form) Single-sided chipbreaker Intended use: external and internal turning System requirements: matching holder, shim/clamp and replacement screws Compatibility determined by form, relief angle, tolerance class, mounting, size and thickness FAQ What materials is this insert recommended for? The Tungaloy DGIM2-020- T9225 insert is recommended primarily for steel machining, providing balanced toughness for medium to heavy cuts and slightly interrupted operations. Which holder types are compatible with this DGIM-form insert? Compatibility depends on the ISO DGIM form and the insert dimensions; the DGIM2-020- form fits standard ISO pockets for rhombic inserts and requires a holder that accepts a cylindrical-holed, screw-clamped insert. How does the T9225 grade behave in interrupted cuts? The T9225 grade offers increased toughness compared with hard, wear-focused grades, making it more tolerant of interrupted cuts and varying engagement without premature edge chipping. Is the DGIM2-020- suitable for both external and internal turning? Yes, the rhombic geometry and the 55° included angle make the insert suitable for both external and internal turning when paired with the appropriate holder and machine stability. What system components are required to use the insert? A complete cutting system comprises the insert, a matching external holder or boring bar, support shim/clamp set and the correct replacement screws to achieve secure and repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150402 BX360 Wendeplatten - Tungaloy
Benefit from the combination of a CBN cutting grade and a robust carbide substrate for consistent finishing of hardened components; the ISO conformity and precise geometry ensure repeatable seating and predictable results. Order the DNGA150402 BX360 directly via Metav Werkzeuge or ask our consultants if needed. DNGA150402 BX360 rhombic turning insert (CBN, 55°) by Tungaloy The DNGA150402 BX360 is a rhombic ISO turning insert designed for finishing operations on hardened steels and, depending on the variant, cast iron. CBN grade BX360 for hardened steels ISO‑standard DNGA150402 form, 55° geometry Rhombic insert with 0.2 mm corner radius Cylindrical hole; compatibility via size & thickness Consistent finishing of hardened components The BX360 grade uses CBN (cubic boron nitride) to deliver superior wear resistance in demanding finishing operations on hardened steels. CBN is a superhard cutting material that maintains edge integrity at high contact temperatures, which translates into longer tool life and fewer indexings. For production runs where surface finish and dimensional stability matter, the result is reduced rework and more predictable cycle times. Geometry and seating designed for reliable clamping The rhombic DNGA form with a 55° included angle provides a versatile cutting geometry for external and internal turning. The 0° relief and the precise ISO interface ensure that seating is repeatable when the insert is mounted in a compatible holder. The 0.2 mm corner radius supports a controlled edge strength for finishing passes, reducing the tendency for microchipping while keeping surface integrity high. Optimised process performance and selection guidance Selecting a CBN grade like BX360 is recommended where abrasiveness or high hardness would rapidly wear conventional grades. The combination of a carbide substrate and a CBN cutting layer enables high cutting speeds and consistent finishing, lowering cost per part in the long run. When choosing inserts for this application, match the insert form, thickness and tolerance class to the holder to preserve process stability and avoid unexpected vibration. Compatibility, mounting and practical notes The insert is an ISO‑standard turning plate in DNGA size and fits holders that accept the DNGA150402 form with a cylindrical hole for clamping. The plate thickness of 4.76 mm and the nominal size of 15 mm must be observed when selecting a toolholder; compatibility is determined by form, free angle, tolerance class, fixing method, size and thickness. Note that this grade has no chipbreaker and is optimised for finish cuts rather than heavy roughing. For detailed selection advice or application support for the Tungaloy DNGA150402 BX360, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting parameters. Technical Data Article number: 6803153 Manufacturer SKU: TUN6803153 SKU: 6803153-Tungaloy Facts Insert size: 15 mm Thickness: 4.76 mm Included angle: 55° Relief angle: 0° Corner radius: 0.2 mm Special features Grade: BX360 Cutting material: CBN (cubic boron nitride) Substrate: carbide Shape: rhombic (DNGA) Hole: cylindrical, with hole No chipbreaker Application: turning, finishing of hardened steels FAQ What materials is this insert suitable for? The DNGA150402 BX360 employs CBN and is intended primarily for hardened steels; depending on the variant, it can also be used for cast iron. How does the insert mount in a toolholder? Mounting depends on matching the DNGA form, thickness (4.76 mm) and the holder's tolerance class; the plate uses a cylindrical hole for secure clamping. Is this grade suitable for roughing operations? The BX360 CBN grade is optimised for finishing and wear‑intensive end machining rather than heavy roughing; it has no chipbreaker and performs best in finish cuts. Which feature ensures repeatable seating and stable cutting? The ISO‑standard DNGA150402 geometry combined with precise thickness and a defined relief angle provides predictable seating and process stability for repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150404 BX360 Wendeplatten - Tungaloy
Combining the BX360 CBN grade with ISO conformity and a controlled 0.4 mm corner radius delivers wear-resistant finishing and predictable edge life for hardened-turning applications; the precise 55° rhombic geometry further ensures stable cutting behaviour and repeatable results. Order the DNGA150404 BX360 insert directly via Metav Werkzeuge or ask our consultants if needed. DNGA150404 BX360 Tungaloy indexable insert for turning A DNGA150404 BX360 indexable turning insert engineered for high-hardness finishing and reliable performance in hardened-steel turning operations. CBN grade BX360 for hardened steels ISO DNGA150404 rhombic 55° geometry 0.4 mm corner radius for fine finishing Cylindrical central hole for secure clamping Wear-resistant CBN grade for consistent finishing The BX360 CBN grade is formulated for demanding finishing on hardened steels and, depending on the variant, certain cast irons. Using cubic boron nitride as the cutting material provides substantially higher wear resistance than conventional carbide in high-hardness applications, which extends tool life and reduces frequency of index changes. This means more consistent surface quality across batches and fewer unplanned interruptions during end-of-shift production. The combination of a hard, abrasion-resistant grade with stable edge geometry results in a reliable finishing solution for parts requiring tight tolerances and good surface integrity. Geometry and clamping deliver repeatable cuts The rhombic plate form with a lead angle of 55° and a relief angle of 0° gives a predictable cutting force direction and facilitates fine finishing passes. The 0.4 mm corner radius supports improved surface finish without sacrificing edge strength, while the central cylindrical hole secures the insert in standard clamping systems. Because the insert conforms to the ISO format, compatibility with matched holders depends on shape, free angle, tolerance class, fastening method, size and thickness; this standardisation simplifies setup and maintains repeatability. Expect lower vibration sensitivity and steady tool performance when the holder and insert are correctly paired. System approach reduces setup time and improves economy As part of an ISO indexable insert system, selection and replacement are straightforward: choose the matching outer holder or boring bar, the correct support/clamp pack and spare fixing screws. The DNGA150404 plate’s 15 mm size and 4.76 mm thickness are standardised dimensions that aid storage and logistical planning. Even without an integrated chipbreaker, the grade and geometry offer controlled chip behaviour for stable finishing when machining stable setups and finishing passes. The net effect is reduced cycle-time variability, improved first-off quality and a lower overall cost per part in medium-to-high-volume production. For reliable finishing in hardened materials, request availability of the Tungaloy BX360 DNGA150404 insert from Metav Werkzeuge and receive tailored advice on holder compatibility and process parameters — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6803160 Manufacturer SKU: TUN6803160 Metav SKU: 6803160-Tungaloy Model series: ISO-Drehwendeschneidplatten Grade: BX360 (CBN) Facts Insert designation: DNGA150404 Inscribed circle / size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Lead angle: 55° Special features Material: carbide Central cylindrical hole Rhombic plate shape No chipbreaker (without) Application: turning; hardened steels and, as applicable, cast iron FAQ What materials is this insert suitable for? This insert is specified for hardened steels and, depending on the variant, cast iron; the BX360 CBN grade is optimised for high-hardness finishing applications. How does the DNGA150404 geometry affect cutting performance? The rhombic 55° geometry and 0.4 mm corner radius provide balanced cutting forces and fine finishing capability, supporting stable surface quality during finishing passes. Is the insert compatible with standard ISO holders? Yes. The plate follows ISO indexing; compatibility depends on holder form, free angle, tolerance class, fastening and size — confirm the matched holder and clamp set for correct fit. Does this insert include a chipbreaker? This variant is supplied without a chipbreaker; chip formation is controlled by grade and geometry and is best assessed against the specific workpiece material and setup. What are the key dimensions to check when replacing an insert? Check the designation DNGA150404, inscribed circle/size (15 mm), plate thickness (4.76 mm), corner radius (0.4 mm) and the central hole style for clamping fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150404 DX140 Wendeplatten - Tungaloy
Benefit from the combination of high cutting speed and exceptional tool life thanks to the PCD DX140 grade and a rhombic 55° geometry; the ISO form ensures straightforward integration into standard toolholders. Order the DNGA150404 insert directly via Metav Werkzeuge or consult our specialists for recommended cutting data and applications. DNGA150404 DX140 – Indexable turning insert for high‑speed aluminium turning (Tungaloy) DNGA150404 DX140 is an ISO-format indexable turning insert designed for high‑speed operations in aluminium and non‑ferrous materials, offering robust PCD performance in a rhombic, 55° geometry. ISO rhombic insert, 55° geometry PCD grade DX140 for aluminium 0.4 mm corner radius for fine turning Cylindrical hole for secure fastening High-speed productivity with extended tool life The DNGA150404 DX140 insert uses a polycrystalline diamond (PCD) cutting material specially formulated for aluminium and abrasive non‑metals, delivering markedly longer tool life compared with conventional grades. The DX140 grade enables significantly higher cutting speeds without compromising edge stability, which reduces cycle times and increases throughput. For production environments where uninterrupted machining and repeatable part quality are required, this insert offers a clear productivity advantage through reduced tool changes and consistent surface finish. Reliable fitment and repeatable performance in ISO systems Compatibility with standard toolholders is governed by the insert form, relief angle, tolerance class, fastening and thickness; the ISO designation ensures predictable interchangeability. The rhombic plate form with a 55° included angle and a cylindrical locating hole provides accurate seating and straightforward clamping in matching external holders or boring bars. Where process stability is critical, the consistent geometry and tolerance adherence of the ISO system simplify tool set‑up and contribute to reproducible results across batches. Material suitability and process stability The cutting material, PCD (polycrystalline diamond), is engineered for non‑ferrous workpieces such as aluminium and brass as well as abrasive composites. With a 0.4 mm corner radius, the insert is well suited to finishing cuts that demand a fine edge and superior surface quality. The underlying substrate is a cemented carbide body that supports the diamond layer and provides mechanical strength; this construction balances edge sharpness with robustness. Because the grade does not include a dedicated chipbreaker, machining strategy and clamping rigidity should be matched to feed and depth of cut to ensure effective chip control. Practical handling and application guidance The insert’s 4.76 mm plate thickness and 15 mm size offer a compact footprint that suits both external and internal turning operations when combined with the correct holder geometry. The cylindrical hole supports secure fastening and repeatable orientation, simplifying insert changes. For new applications, start with conservative feeds and progressively increase cutting speed within the DX140 capability while monitoring edge condition; this approach helps to exploit the insert’s high‑speed potential without risking premature wear. Technical advice and cutting‑parameter recommendations are available to ensure optimal integration into existing processes. Contact Metav Werkzeuge for tailored cutting data, holder recommendations and material‑specific advice on the DNGA150404 DX140 Tungaloy PCD insert Technical data Article number: 6803158 Manufacturer SKU: TUN6803158 SKU: 6803158-Tungaloy Model series: ISO turning inserts Core data Insert designation: DNGA150404 (ISO 150404) Grade: DX140 Cutting material: PCD (polycrystalline diamond) Substrate material: cemented carbide Corner radius: 0.4 mm Included angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Features Rhombic plate form Cylindrical locating hole No chipbreaker Designed for aluminium and non‑ferrous materials High cutting speed capability Long tool life and edge stability Compatible with ISO‑standard holders FAQ What materials is this insert intended for? The DNGA150404 DX140 insert is intended primarily for aluminium and other non‑ferrous materials, and it also performs well on abrasive non‑metallic workpieces thanks to its PCD cutting material. Is the insert compatible with standard ISO holders? Yes, the DNGA150404 follows ISO dimensions and will fit holders designed for 150404 inserts; compatibility depends on matching form, relief angle, tolerance class, fastening and thickness. Why choose the DX140 grade for aluminium work? The DX140 PCD grade offers superior edge retention and allows higher cutting speeds on aluminium, which translates into longer tool life and improved surface finish for the DNGA150404 insert. How should chip control be managed given there is no chipbreaker? Without an integrated chipbreaker, the machining strategy for the DNGA150404 should focus on appropriate feed, depth of cut and secure clamping to ensure controlled chip flow and process stability. What indicates the end of tool life for this insert? Wear signs such as edge rounding, increased cutting forces, loss of surface quality or unusual vibration suggest the DNGA150404 insert requires replacement to maintain part quality and tool life. Can the insert be used for internal turning? Yes, the DNGA150404 can be used for both external and internal turning when installed in the correct boring bar or holder that accommodates ISO 150404 inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNGA 150404 DX160 Wendeplatten - Tungaloy
Take advantage of the combination of high cutting speeds, exceptional wear resistance, and precise ISO compatibility to maintain productive turning cycles; order via Metav Werkzeuge or consult our specialists for application advice. DNGA150404 DX160 turning insert by Tungaloy — PCD grade for aluminium and non-ferrous machining DNGA150404 DX160 presents a compact, rhombic ISO insert designed for efficient external and internal turning where speed and abrasion resistance are decisive. PCD grade DX160 for abrasive materials Enables higher cutting speeds and long tool life Rhombic form, 15 mm size for versatile use 0.4 mm corner radius for fine profile work Faster cycle times through PCD-grade cutting The combination of PCD cutting material and the DX160 grade delivers a clear productivity edge when machining aluminium and other non-ferrous materials. The polycrystalline diamond layer provides a very high wear resistance, which translates into long tool life under elevated cutting speeds. This reduces downtime for insert changes and helps stabilise process costs over longer production runs. The benefit is measurable: longer intervals between indexings and more consistent surface quality on components. Predictable geometry reduces setup effort The rhombic form and ISO designation 150404 ensure straightforward selection and predictable clamping behaviour in standard external holders and boring bars. The insert’s 0.4 mm radius and 4.76 mm thickness maintain cutting-edge stability while producing fine contour detail. Because the geometry is ISO-compliant, tool presetting is quicker and tool management becomes simpler, improving machine uptime and workflow planning for small-batch and series production alike. Secure clamping and versatile mounting for reliable results Designed with a cylindrical hole, this insert secures reliably in conventional clamping systems and minimises micro-movements during cutting. The nominal clearance angle of 0° and the 55° operating angle provide a balanced approach between chip control and cutting edge strength. Compatibility depends on insert form, tolerance class and thickness, so matching the insert to a suitable holder is essential for achieving the consistent process security expected in precision turning. Applications and material suitability explained This PCD-grade insert is optimised for aluminium, messings and abrasive non-metallics where thermal conductivity and chip formation differ from steel. The hard diamond cutting layer resists abrasive wear that would rapidly degrade conventional carbide edges, enabling higher material removal rates with stable surface finish. For users migrating from carbide to PCD for non-ferrous components, the main advantages are reduced frequency of regrinding and improved repeatability in finishing operations. Contact Metav Werkzeuge today for tailored tooling advice, compatible holder recommendations and swift delivery of Tungaloy PCD inserts; eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: 6803159 SKU: 6803159-Tungaloy Manufacturer SKU: TUN6803159 Core specifications Model series: ISO turning insert series ISO designation: 150404 Insert form: rhombic Insert size: 15 mm Corner radius: 0.4 mm Thickness: 4.76 mm Clearance angle: 0° Operating angle: 55° Design and features Cutting material: polykristalliner Diamant (PCD) Grade: DX160 Substrate material: carbide Hole: with hole — cylindrical hole Typical application: external and internal turning FAQ What materials is this insert optimised for? The DNGA150404 DX160 insert is optimised for aluminium, messings and abrasive non-metallic materials thanks to its PCD cutting layer and DX160 grade. Can the insert be used for both external and internal turning? Yes, the ISO rhombic form and the cylindrical hole design permit use in suitable external holders and boring bars for internal turning where the holder accepts the ISO 150404 format. How does DX160 differ from conventional carbide grades? DX160 is a PCD grade offering much higher abrasion resistance than standard carbide grades, resulting in longer life when machining abrasive or non-ferrous materials. What should be considered when selecting a holder for this insert? Compatibility is determined by insert form, free angle, tolerance class, fastening method, size and thickness; choose a holder that matches the ISO 150404 geometry for secure clamping and stable cutting. Is the substrate material specified? Yes, the insert uses a carbide substrate beneath the PCD cutting layer to provide structural support and rigidity during high-speed operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com