DNGA 150404 LX10 Wendeplatten - Tungaloy
Benefit from a precise, ISO‑compliant insert that combines stable edge life and consistent chip control; the LX10 grade delivers wear resistance and toughness while the rhombic 55° geometry ensures repeatable turning performance. Order directly via Metav Werkzeuge or consult the team for application-specific advice. DNGA 150404 LX10 — DNGA150404 LX10 Tungaloy indexable turning insert (55° rhombic, 0.4 mm radius) DNGA150404 LX10 Tungaloy indexable insert is an ISO‑standard turning insert designed for reliable external and internal turning in industrial machining. ISO‑standard rhombic 55° geometry LX10 grade for balanced wear resistance 0.4 mm nose radius for accurate profiling Cylindrical hole for secure clamping Consistent geometry for dependable turning results The ISO‑standard rhombic design with a 55° cutting angle provides a predictable cutting vector that supports stable toolpaths and consistent component form. As an indexable insert, the unit is intended to be combined with a matching holder or boring bar; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The specified 0° clearance angle and the rhombic outline reduce unexpected interference in close‑tolerance operations, while the defined 0.4 mm nose radius helps achieve fine contours and repeatable surface finishes without compromising edge strength. Balanced LX10 grade and cemented carbide for longer tool life The insert is manufactured from cemented carbide and supplied in Tungaloy’s LX10 grade, which is formulated to combine wear resistance with sufficient toughness for standard turning tasks. This balance reduces the frequency of index changes under moderate to demanding operating conditions and supports predictable tool life in production runs. Selection of an appropriate chipformer remains necessary for optimal chip control; the grade complements the insert geometry by improving edge stability and maintaining dimensional accuracy over multiple indexes. Practical system integration and workshop advantages Integration into a machining system is straightforward: the ISO plate is compatible with standard clamping systems and requires the appropriate holder, shim or clamp set and replacement screw. The insert’s dimensions — 15 mm size, 4.76 mm thickness and the rhombic plate form with a cylindrical hole — simplify inventory management when standardised components are used across multiple machines. For production planning, the standardised form factor supports fast changeovers and repeatable seating, delivering measurable time savings on set‑up and maintenance tasks. Contact Metav Werkzeuge for tailored application guidance on the Tungaloy DNGA150404 LX10 insert and assistance with holder selection; technical data and ordering support are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Technical Data Article number: 6852015 SKU: 6852015-Tungaloy Manufacturer SKU: TUN6852015 Model series: ISO turning inserts Material: cemented carbide Application: Turning ISO designation: 150404 Facts Size: 15 mm Thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Insert angle: 55° Special features Rhombic plate form Cylindrical hole LX10 grade (Tungaloy) ISO‑standard insert No chipbreaker supplied FAQ What holders are compatible with this insert? Compatibility is determined by the holder form, clearance angle, tolerance class, fastening method, size and thickness; the DNGA150404 LX10 insert fits holders made for ISO‑standard rhombic 55° plates and uses a cylindrical‑hole clamping arrangement. Which operations is the insert best suited to? The insert is intended for external and internal turning; the LX10 grade and the rhombic 55° geometry are optimised for general turning tasks that require a balance of wear resistance and edge stability. What does the LX10 grade mean for performance? LX10 is a Tungaloy carbide grade offering a compromise between wear resistance and toughness, supporting longer edge life in mixed turning applications without excessive brittleness. Are replacement screws and clamping parts required? A matching shim or clamp set and replacement screw are part of the typical system build; the insert itself is presented as an ISO plate and requires the appropriate clamping components for secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150404 LX11 Wendeplatten - Tungaloy
Combine the LX11 wear-resistant grade, ISO‑compliant DNGA geometry and robust carbide construction for dependable turning results; order the DNGA150404 LX11 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application advice. DNGA150404 LX11 Tungaloy turning insert — Carbide, rhombic 55° geometry A DNGA150404 LX11 Tungaloy insert designed for ISO‑standard external and internal turning, offering a balance of wear resistance and edge stability for productive machining. *ISO standard rhombic insert, 55° cutting angle *LX11 Tungaloy grade for wear resistance *0.4 mm corner radius for versatile finishes *Cylindrical hole mounting, 4.76 mm thickness Consistent metal removal for efficient turning The ISO system layout and carbide composition of the insert ensure reproducible cutting performance and reduced process variation. The LX11 grade combines enhanced wear resistance with sufficient toughness to support sustained cutting in common turning operations, which lowers the frequency of tool changes and improves overall cycle times. As an ISO‑standard component, the geometry and dimensions permit straightforward replacement in compatible holders, helping to maintain steady production throughput. Geometry tuned for dimensional control and surface quality The 55° rhombic cutting angle and 0.4 mm corner radius deliver a predictable contact geometry that supports repeatable profiles and controlled chip formation. The rhombic shape contributes to access in both external and internal turning, while the cylindrical hole provides secure clamping when paired with the correct seat and screw. These geometric choices translate into tighter tolerances and improved surface finish with fewer corrective operations, particularly when the holder and clamping set match the insert’s specified form, relief angle and thickness. Practical application notes for workshop integration Intended for turning, the insert is supplied without a chipbreaker, so selection of an appropriate groove or external chip control strategy is advisable depending on the workpiece material and cut depth. Compatibility with a chosen holder is governed by form, relief angle, tolerance class, fastening method, size and thickness — check these parameters during tool selection. The insert’s Tungaloy metallurgy and ISO‑compliant format make it suitable for routine production tasks where stable edge life and predictable replacement intervals are priorities. For tailored advice on holder pairing or process parameters, technical consultation is available. Discuss the DNGA150404 LX11 Tungaloy insert with Metav Werkzeuge for precise tool selection and process optimisation — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803154 Manufacturer SKU: TUN6803154 Supplier SKU: 6803154-Tungaloy Model series: ISO turning indexable inserts Designation: DNGA150404 Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Cutting angle: 55° Hole: with hole (cylindrical) Special features Grade: LX11 Cutting material: Carbide Shape: Rhombic Chipbreaker: none Intended application: Turning ISO‑standard insert family FAQ What materials is this insert suitable for? The DNGA150404 LX11 Tungaloy insert is designed as a general turning insert; the LX11 grade offers a balance of wear resistance and toughness suitable for a broad range of workpieces — select the exact grade and cutting data to match the specific material and operation. How does the 0.4 mm corner radius affect the finish? A 0.4 mm radius moderates cutting edge stress while improving surface finish; the DNGA150404 geometry helps to achieve consistent profiles with reduced risk of edge chipping compared with sharper radii. Is the insert compatible with all DNGA holders? Compatibility depends on holder form, relief angle, tolerance class, fastening and thickness; the insert follows ISO dimensions but holders must be checked for matching seat and screw arrangement. What does 'no chipbreaker' mean for machining? Being supplied without a chipbreaker, the insert relies on process parameters and external chip control; for materials prone to long, stringy chips, pairing with a suitable holder or applying additional chip control measures is recommended. How is the insert fixed in the toolholder? The DNGA150404 features a cylindrical hole for secure mounting; fastening must correspond to the holder’s clamping system and the insert’s tolerance class to ensure stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150404 LX21 Wendeplatten - Tungaloy
The combination of the LX21 wear-resistant grade and a cemented carbide substrate delivers stable cutting performance and extended edge life; the ISO DNGA150404 geometry with a 55° rhombic form and a 0.4 mm corner radius produces consistent profiles for external and internal turning. Order the DNGA150404 LX21 indexable insert directly via Metav Werkzeuge or ask our consultants for compatibility advice. DNGA150404 LX21 indexable turning insert — ISO rhombic 55° form by Tungaloy The DNGA150404 LX21 indexable insert is an ISO‑standard rhombic turning insert designed for external and internal turning, combining a cemented carbide body with the LX21 grade for a balance of wear resistance and toughness. DNGA rhombic form with 55° cutting angle LX21 grade for wear resistance and toughness 0.4 mm corner radius for accurate profiles Centre hole, cylindrical for secure clamping High-performance cutting for sustained productivity The DNGA150404 LX21 indexable insert is engineered to maintain a steady cutting edge under continuous turning loads. The LX21 grade supplements the substrate with a designed balance of wear resistance and toughness, which reduces frequent edge changes and supports longer uninterrupted production runs. For machining routines that prioritise cycle time and repeatability, the combination of cemented carbide substrate and LX21 conditioning delivers measurable improvements in tool life and process stability without compromising surface quality. Precise geometry and straightforward integration The rhombic plate geometry with a 55° cutting angle and 0° relief provides a reliable form for finish and medium turning operations, while the 0.4 mm corner radius ensures defined edge profiles. Being an ISO indexable design, the insert integrates with holders when the holder’s form, clearance, tolerance class, fastening method, size and thickness are matched. The 4.76 mm plate thickness and the cylindrical centre hole simplify secure mounting with standard clamping sets, supporting quick insert changes and minimal setup time in systematic production environments. Grade characteristics that extend service intervals The LX21 assorting of cutting characteristics is intended to combine edge stability with resistance to abrasive wear, which makes the insert suitable for a range of turning conditions where a balance between longevity and reliability is required. Choosing the correct chip control geometry and the LX21 grade according to the workpiece material and machining stability helps to reduce flank wear and maintain dimensional consistency. This targeted material‑grade approach supports predictable tool consumption and contributes to improved overall equipment effectiveness (OEE). Practical handling and application guidance For best results, pair the insert with an appropriate ISO holder and use the correct screw and clamping set for the cylindrical centre hole to ensure safe fixation. Compatibility with the chosen holder is determined by form, clearance, tolerance class, fastening, size and thickness; check these parameters before mounting. Where chip control is important, select a matching chipbreaker and adjust feeds and speeds to account for rig stiffness and material behaviour. Regular inspection of the cutting edge and adherence to recommended clamping torque will preserve the edge life and dimensional stability of the turned components. For reliable, long-lasting turning performance with the Tungaloy LX21 DNGA150404 insert, contact Metav Werkzeuge for ordering or technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6803155 Manufacturer SKU: TUN6803155 SKU: 6803155-Tungaloy Manufacturer: Tungaloy Facts Inscribed circle / size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 0° Centre hole: yes (cylindrical) Special features Grade: LX21 (Tungaloy) Material: cemented carbide Shape: rhombic Model series: ISO indexable turning inserts Application: Turning (external and internal) Compatibility with ISO holders depending on form, clearance, tolerance, fastening, size and thickness FAQ What is the primary application for this insert? The DNGA150404 LX21 indexable insert by Tungaloy is designed primarily for external and internal turning operations under ISO indexable insert systems. Which holders are compatible with the DNGA150404 LX21 insert? Compatibility for the DNGA150404 LX21 depends on the holder’s form, clearance, tolerance class, fastening, size and thickness; the insert fits ISO holders that match these parameters. What does the LX21 grade indicate for the DNGA150404 insert? LX21 is the Tungaloy grade selected for a balance between wear resistance and toughness, enhancing edge stability and prolonging the usable life of the DNGA150404 insert in turning applications. Is a chipbreaker supplied with the DNGA150404 LX21 insert? The DNGA150404 LX21 insert is supplied without a chipbreaker; chip-control geometry should be selected separately to suit the workpiece material and machining conditions. How is the DNGA150404 LX21 insert secured in the holder? The DNGA150404 LX21 uses a cylindrical centre hole for secure clamping; use the correct screw, underlay/clamping set and holder to ensure stable fixation and repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150404 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, the NS520 cermet grade for superior surface quality, and a small 0.4 mm corner radius for fine finishing — all designed to keep turning operations productive and predictable. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNGA 150404 NS520 Tungaloy indexable insert for turning (rhombic, 55° geometry) The DNGA150404 NS520 Tungaloy is an ISO-standard rhombic indexable insert intended for precision external and internal turning, optimised for finishing and light machining of steel. ISO rhombic insert DNGA150404, 55° geometry NS520 cermet grade for finishing of steel 0.4 mm corner radius for fine surface finish Cylindrical hole, 4.76 mm thickness for secure clamping Consistent finish and controlled wear for high-quality components The insert is manufactured in the NS520 cermet grade, formulated to deliver excellent surface finish and tight dimensional control during finish turning. Cermet materials combine ceramic hardness with metal toughness to reduce flank wear and improve edge retention under finishing conditions; this results in more consistent part geometry over extended runs. The 0.4 mm corner radius helps produce fine surface textures without promoting edge chipping when used with appropriate feeds and stable clamping. For shops focused on repeatable quality, this combination reduces rework and supports efficient downstream assembly processes. Seamless integration into ISO tooling systems for versatile use Designed as an ISO-standard indexable plate, compatibility with holders is defined by form, clearance angle, tolerance class, attachment method, size and thickness. The 15 mm plate size and 4.76 mm thickness align with common holder families, while the cylindrical hole provides secure seating and repeatable location during indexing. The absence of a chipbreaker (chipformer: none) indicates that the insert is optimised for finishing cuts and requires controlled chip evacuation via machining parameters and stable set-up. Engineers can therefore expect predictable behaviour when matching the insert to a suitable external or internal turning holder. Geometry and handling that support productivity and process stability The rhombic plate form with a 55° cutting geometry and 0° clearance offers a balance between accessibility for internal features and a robust cutting edge for external passes. The combination of geometry and the NS520 coating concept yields good edge life in finishing applications and consistent results across batches. Indexable inserts minimise downtime because worn edges are rotated rather than reconditioned; the ISO system also simplifies inventory management. Production managers will value the insert’s predictable wear patterns and the straightforward criteria for selecting matching holders and clamping kits. For precision finishing with Tungaloy’s NS520 cermet insert, contact Metav Werkzeuge for technical advice and procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6803156 Manufacturer SKU: TUN6803156 SKU: 6803156-Tungaloy Brand: Tungaloy Dimensions & geometry Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 55° Materials & features Grade/coating: NS520 (cermet / coated cermet) Substrate: cemented carbide Application: turning — finishing to light machining of steel Chipbreaker: none System: ISO-standard indexable insert Hole style: cylindrical hole Plate form: rhombic (DNGA) FAQ What applications suit this insert best? The DNGA150404 NS520 Tungaloy insert is primarily designed for precision external and internal turning where finishing and dimensional accuracy on steel are required. How does the NS520 grade affect performance? The NS520 cermet grade improves surface quality and wear resistance in finishing operations, giving more uniform wear and longer periods between indexings. Is a specific holder required for this plate? Compatibility depends on holder form, clearance angle, tolerance class, attachment and plate thickness; the ISO-standard form and the cylindrical hole make it compatible with many standard DNGA holders. Can this insert handle roughing cuts? This insert is optimised for finishing to light machining; because it has no chipbreaker and a fine corner radius, stable setups and conservative cutting parameters are recommended rather than heavy roughing passes. What does the 0° clearance and 55° geometry mean for machining? A 0° clearance reduces radial relief for a stronger cutting edge, while the 55° geometry offers a versatile approach angle suitable for external profiles and some internal turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of sharp uncoated carbide cutting edges, ISO conformity and a 0.4 mm corner radius to secure consistent turning results on non‑ferrous materials; order the DNGA150404 TH10 directly via Metav Werkzeuge or request application advice from the consultants. DNGA 150404 TH10 — ISO rhombic turning insert, uncoated carbide, 0.4 mm radius (Tungaloy) The DNGA150404 TH10 is an ISO rhombic turning insert intended for external and internal turning, offering a sharp uncoated carbide edge that reduces cutting forces for clean surface finishes on non‑ferrous materials. ISO‑standard rhombic insert Uncoated carbide TH10 grade 0.4 mm corner radius Cylindrical hole for secure clamping Reliable, low‑force cutting for non‑ferrous workpieces The insert delivers dependable cutting performance through its uncoated carbide grade TH10 and a sharp cutting edge, which together lower cutting forces and help achieve smoother surfaces when machining aluminium, copper and similar alloys. The modest 0.4 mm corner radius provides a balance between edge strength and fine finish, making the component suitable where light to moderate depths of cut are required. This results in reduced vibration and improved dimensional consistency for batch production and one‑off turning alike. ISO conformity and straightforward system integration Being an ISO‑designated insert, the rhombic geometry with a 55° included angle ensures compatibility with widely available external holders and boring bars; compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness. The insert’s cylindrical hole and standard thickness of 4.76 mm facilitate secure clamping and fast indexable changes, reducing downtime during tool changes and setup. Clear system integration supports predictable process parameters and simplifies tool inventory management. Process efficiency without unnecessary coating The decision for an uncoated cutting edge is deliberate: in many non‑ferrous applications coatings are not required and can increase built‑up edge tendency. The TH10 grade provides a sharp, universal cutting edge that performs well where low cutting forces and clean swarf are priorities. For operations that demand chip control, a suitable chipbreaker and the correct grade should be selected according to workpiece material and machine stability; the present insert is supplied without a chipbreaker to allow flexible pairing with the appropriate holder and mating components. Practical mounting and selection guidance for stable results The typical system comprises the ISO insert, a matching external holder or boring bar, a support shim or clamp set and replacement screws. Selection should match insert geometry to the holder and account for machine rigidity, workpiece material and required surface finish. Where component tolerance and repeatability are critical, favour the combination of the ISO standard insert, a firm clamping arrangement and the correct edge preparation to maintain tool life and process stability. For reliable turning with Tungaloy’s TH10 uncoated carbide technology, contact Metav Werkzeuge for application advice and component matching at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803157 SKU: 6803157-Tungaloy Manufacturer SKU: TUN6803157 Name: DNGA150404 TH10 Tungaloy insert Brand: Tungaloy Application: Turning Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Special features Material: carbide (Hartmetall) Grade: TH10 (uncoated) Shape: rhombic Hole: with hole Hole style: cylindrical hole ISO designation: DNGA150404 FAQ Which materials are suitable for this insert? The DNGA150404 TH10 insert is optimised for non‑ferrous materials such as aluminium and copper alloys; the uncoated TH10 grade supports low cutting forces and clean finishes. Is the insert compatible with standard ISO holders? Yes, the ISO rhombic form of the DNGA150404 TH10 ensures compatibility with holders designed for DNGA‑type inserts, subject to matching form, tolerance class, clamping method, size and thickness. Does the insert include a chipbreaker? The DNGA150404 TH10 is supplied without a chipbreaker; chip control should be achieved by selecting a suitable chipbreaker in combination with the chosen holder and machining parameters. What is the recommended edge radius for finishing operations? With a 0.4 mm corner radius the insert offers a compromise between edge strength and surface finish; for very fine finishing tasks a smaller radius or a ground edge on a dedicated finishing insert may be preferable. How is the insert clamped in the holder? Clamping relies on the insert’s cylindrical hole and the holder’s clamping system; the DNGA150404 TH10 is secured using the corresponding screw, shim or clamp set specified for the holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNGA 150408 BX360 Wendeplatten - Tungaloy
Benefit from the combination of BX360 CBN wear resistance, precise 0.8 mm corner radius and ISO compatibility for consistent, high-quality turning results; order the insert directly via Metav Werkzeuge or consult our specialists for application support. DNGA 150408 BX360 Tungaloy turning insert — 55° rhombic, CBN grade DNGA 150408 BX360 is an ISO-format turning insert designed for high-hardness finishing and wear-intensive machining. BX360 CBN for hardened steels Rhombic DNGA 55° geometry 0° relief angle for stable cutting 0.8 mm corner radius for accurate finish Cylindrical hole, 15 mm size, 4.76 mm thick Precision finishing for hardened components The BX360 grade uses cubic boron nitride (CBN) as the cutting material, offering superior hardness and thermal stability compared with conventional abrasives; this makes it particularly suitable for hardened steels and certain cast irons in end-machining operations. The medium-sized 0.8 mm corner radius promotes an even cutting edge for improved surface quality while balancing edge strength, which helps to reduce chatter and extend the effective cutting life in finishing passes. The result is a predictable, repeatable profile where dimensional conformity is critical. Reliable interface and secure clamping for stable machining Compatibility is determined by shape, relief angle, tolerance class, fastening, size and thickness, so the ISO designation ensures consistent fit with appropriately matched holders. The rhombic 55° geometry provides an advantageous approach angle for external and internal turning, and the 0° relief contributes to neutral rake characteristics for stable cutting forces. When paired with a suitable external holder or boring bar plus the correct shim and clamping set, the system reduces vibration and supports predictable tool life. Practical system components and reduced downtime The system comprises the ISO turning insert, a mating external holder or boring bar, an underlay/clamp set and replacement screws; spare parts and correct torque settings are essential for safe operation. The insert’s cylindrical hole eases positive locating and secure fastening in many standard clamping systems, facilitating indexable changes and keeping setup times low. For production environments the combination of straightforward indexing and the BX360 wear properties translates to fewer interruptions and improved overall throughput. Application guidance and material matching While the insert excels in finishing hardened steels, selection of chipbreaker style and matching insert grade should reflect the workpiece, machining strategy and machine stability. This particular ISO-format rhombic insert is supplied without a chipbreaker, allowing selection of a geometry that suits the feed and depth of cut for fine finishing or semi-finishing. For high-volume or difficult-to-machine alloys, pairing the right holder rigidity and conservative cutting parameters at first run will confirm suitability before ramping production. Contact Metav Werkzeuge for a tailored recommendation on holders, shims and suitable cutting parameters for this Tungaloy DNGA 150408 BX360 turning insert — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss machining specifics or request a quotation Technical data Article number: 6803168 Manufacturer SKU: TUN6803168 SKU: 6803168-Tungaloy Label: DNGA150408 BX360 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features ISO designation: DNGA150408 Cutting material: cubic boron nitride (CBN), BX360 Substrate: Hartmetall Plate form: rhombic Hole: with cylindrical hole Chipbreaker: without Model series: ISO turning inserts Application: Turning (external and internal) FAQ What materials is this insert designed for? The DNGA 150408 BX360 Tungaloy turning insert is designed primarily for hardened steels and, depending on specific BX360 variants, certain cast irons; it is optimised for wear-intensive finishing. How does the 0° relief angle affect machining? A 0° relief angle on this ISO-format insert produces a neutral geometry that helps maintain stable cutting forces and supports predictable tool life under finishing conditions for the DNGA 150408 BX360 insert. Which toolholders fit this insert? Holders compatible with the DNGA family and the ISO size 150408 will accept the insert; compatibility depends on matching the rhombic shape, 55° approach angle, thickness and cylindrical locating hole. Is this insert supplied with a chipbreaker? This version of the insert is supplied without a chipbreaker, allowing the selection of a specialised chip-control geometry where required for the specific material and cutting parameters. How should the corner radius be used for finishing passes? The 0.8 mm corner radius on the DNGA 150408 BX360 offers a balance between a fine surface finish and sufficient edge strength; it is well suited to finishing feeds where surface integrity and form accuracy are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150408 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of high cutting speeds and exceptional tool life for efficient aluminium and non‑ferrous machining; order the insert via Metav Werkzeuge or consult our specialists for application support. DNGA150408 DX140 Turning Insert (PCD) – Tungaloy DNGA150408 DX140 PCD indexable insert for high‑speed external and internal turning of aluminium, non‑ferrous and abrasive non‑metal materials PCD grade DX140 for abrasive non‑metals Optimised for high cutting speeds Rhombic 15 mm plate, 0.8 mm radius ISO DNGA form with cylindrical hole Maximise throughput with PCD technology The polished PCD cutting layer in this insert delivers markedly longer life when machining non‑ferrous and abrasive non‑metal materials, translating into fewer tool changes and higher machine utilisation. The DX140 grade is engineered for sustained performance at high cutting speeds, so operators benefit from reduced cycle times and consistent part quality. In practical terms, a PCD cutting edge resists abrasive wear far better than conventional coatings, which lowers per‑part tooling costs and supports stable production runs. Secure clamping and ISO interchangeability Compatibility with holders is determined by form, relief angle, tolerance class, securing method, size and thickness; this ISO‑standard insert conforms to those requirements for straightforward integration into existing tool systems. The rhombic 15 mm form with a cylindrical hole and 0° relief angle ensures reliable positioning and repeatability in both external and internal turning operations. Using ISO‑conforming plates simplifies inventory management and reduces downtime through easy replacement and interchangeability. Designed substrate and geometry for precise results The insert combines a carbide substrate with a polycrystalline diamond cutting layer, offering a balance between toughness and wear resistance. The 0.8 mm corner radius supports controlled edge strength for turning applications where edge robustness and surface finish matter. With a plate thickness of 4.76 mm and a saddle angle of 55°, the geometry provides stable cutting conditions, which helps maintain dimensional accuracy and surface quality across long production batches. Clear application focus and handling guidance Intended primarily for turning, the insert is especially suited to aluminium, messings and other non‑ferrous alloys, as well as abrasive non‑metallic workpieces where PCD outperforms conventional grades. No chipbreaker is integrated, so chip control should be matched to material and process via appropriate coolant, feeds and toolpath strategies. The system build typically comprises the ISO turning insert, a suitable external holder or boring bar, a support/wedge set and replacement screws; this modular approach supports rapid servicing and sustained process reliability. For procurement or tailored application advice on the Tungaloy DNGA150408 DX140 PCD turning insert, please contact Metav Werkzeuge to discuss process parameters and delivery options Technical Data Article number: 6803167 Manufacturer SKU: TUN6803167 SKU: 6803167-Tungaloy Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Plate size: 15 mm Plate thickness: 4.76 mm Saddle angle: 55° Relief angle: 0° Special features Cutting material: polykristalliner Diamant (PCD) Grade: DX140 Substrate: Hartmetall Plate form: rhombic Hole: with cylindrical hole Chipbreaker: without Intended use: turning Model series: ISO turning inserts FAQ What materials is this insert designed for? The DNGA150408 DX140 insert is designed for aluminium, messings and abrasive non‑metal materials; the PCD cutting layer provides superior wear resistance for such applications. Is the insert compatible with standard DNGA holders? Yes, the ISO DNGA form and the cylindrical hole allow compatibility with standard DNGA holders when form, size and tolerance class match. What is the corner radius and how does it affect machining? This insert has a 0.8 mm corner radius, providing a balance between edge strength and surface finish suitable for medium‑duty turning applications. Does the insert include a chipbreaker? The insert is supplied without a chipbreaker; chip control should be managed through cutting data, tooling arrangement and suitable coolant strategies. Which SKU should be ordered for this item? Order using SKU 6803167‑Tungaloy or refer to Manufacturer SKU TUN6803167 for procurement and stock enquiries. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150408 FX105 Wendeplatten - Tungaloy
Benefit from a durable turning solution that pairs the FX105 Tungaloy grade with a 0.8 mm corner radius and a secure cylindrical mounting hole for stable, repeatable cuts; order directly via Metav Werkzeuge or request application advice from the consultants. DNGA150408 FX105 Tungaloy indexable insert — ISO turning insert, 55° rhombic DNGA150408 FX105 is an ISO-standard rhombic indexable insert designed for precise external and internal turning, offering a balance of wear resistance and edge stability for productive machining. DNGA150408 ISO rhombic insert, 55° cutting angle FX105 Tungaloy grade for wear resistance and toughness Cylindrical central hole for secure clamping 0.8 mm corner radius for versatile turning Long-lasting performance through engineered grade and geometry The FX105 grade, developed by Tungaloy, combines wear resistance and toughness to extend cutting edge life under typical turning loads. Manufactured in carbide, this insert is intended for production environments where predictable tool life reduces downtime and tooling change frequency. The particular balance between abrasion resistance and edge stability means fewer interruptions for regrinding or replacement, contributing to more consistent cycle times and lower unit machining costs. Secure clamping and repeatable positioning for tighter tolerances The rhombic ISO 150408 form with a 55° cutting angle and a cylindrical hole ensures robust mechanical location and clamping in compatible holders. Compatibility with a toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness; with a 4.76 mm plate thickness the insert integrates into common ISO clamping systems. These precise interfaces support repeatable inserts changes and maintain part-to-part dimensional stability on batch runs. Adaptable for external and internal turning tasks Designed for both external and internal turning, the insert performs well in varied set-ups when paired with a holder and the correct cutting parameters. The 0.8 mm corner radius offers a compromise between edge strength and versatility, permitting moderate feed rates while preserving surface quality. For workpieces with differing material properties, the grade selection and presence or absence of a chipbreaker should be matched to the machining task to achieve optimal chip control and finished-surface requirements. System-level reliability to keep production moving Integration is straightforward: the system comprises the ISO insert, a matching external holder or boring bar, shims/clamping set and replacement screws. The insert’s ISO conformity simplifies stocking and replacement across multiple machines. With no integrated chipbreaker, the component offers flexibility to tailor chip management through holder geometry and process parameters, enabling reliable performance across typical turning operations. For specific application checks or to secure DNGA150408 FX105 inserts for upcoming production, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultancy and supply coordination Technical data Article number: 6803162 SKU: 6803162-Tungaloy Manufacturer SKU: TUN6803162 Designation: DNGA150408 FX105 Tungaloy indexable insert Manufacturer: Tungaloy Facts ISO designation: 150408 Size: 15 mm Corner radius: 0.8 mm Thickness: 4.76 mm Cutting angle: 55° Relief angle: 0° Special features Grade/coating: FX105 Material: carbide Series: ISO turning inserts Hole style: cylindrical hole Chipbreaker: none Typical application: external and internal turning FAQ What materials is this insert intended for? The DNGA150408 FX105 insert is a carbide grade developed to provide a balance of wear resistance and toughness; the FX105 grade complements geometries selected for specific workpiece materials and machining conditions. Is the DNGA150408 compatible with standard ISO holders? Compatibility depends on holder form, relief angle, tolerance class, fastening and thickness; the DNGA150408 follows ISO plate geometry and is intended for integration into matching ISO clamping systems. Does this insert include a chipbreaker? The specified DNGA150408 FX105 is listed without an integrated chipbreaker, allowing chip control to be managed via holder geometry and cutting parameters. What are the key dimensions to check before fitting the insert? Verify the 15 mm plate size, 4.76 mm thickness, 0.8 mm corner radius and the cylindrical hole arrangement to ensure correct seating and clamping. Can this insert be used for internal turning on boring bars? Yes, the ISO rhombic shape and secure central hole make the insert suitable for both external turning and internal operations when paired with an appropriate boring bar and clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150408 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of LX10 wear resistance, ISO‑standard compatibility and a 0.8 mm corner radius for consistent edge stability and predictable tool life; order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. DNGA150408 LX10 Tungaloy Turning Insert — 55° geometry, 0.8 mm radius DNGA150408 LX10 is an ISO‑standard rhombic turning insert designed for external and internal turning operations in ISO tooling systems. ISO‑standard rhombic insert DNGA150408 LX10 Tungaloy grade for wear resistance 0.8 mm corner radius for edge stability 55° geometry for external and internal turning Consistent cutting performance through optimised grade and geometry The combination of the LX10 Tungaloy grade and a carbide substrate delivers a controlled balance of wear resistance and toughness, which is essential for repeatable machining cycles. The rhombic plate form with a 55° included angle provides a versatile cutting edge suitable for both finishing and medium‑duty roughing in conventional turning applications. With a defined 0.8 mm corner radius and a clearance angle of 0°, the insert offers increased edge stability, reducing the risk of chipping under intermittent engagement and enabling predictable tool life for planned production runs. ISO compatibility and secure clamping for reliable set‑ups Compatibility with standard toolholders is ensured by ISO‑compliant dimensions, form and thickness; clamping and tolerance classes determine secure seating in the holder. The insert features a cylindrical hole for positive indexing and stable fixation, and its 4.76 mm plate thickness contributes to vibration damping when paired with appropriately rigid holders. The system approach—insert, matching external holder or boring bar, and standard screw/clamping set—simplifies reconditioning of tool assemblies and shortens changeover times while maintaining consistent cutting geometry across batches. Process efficiency and material coverage The Tungaloy LX10 grade complements the insert geometry with a focus on broad material applicability and stable chip formation. The insert is suitable for conventional steels and a range of alloyed materials where a balance of flank wear resistance and cutting edge robustness is required. The absence of an integrated chipbreaker in this variant prioritises predictable chip flow when paired with holder geometry and cutting parameters selected for the workpiece material and operation. The predictable behaviour of the insert supports cycle time optimisation and contributes to overall process security in series production. For application‑specific recommendations on the Tungaloy LX10 DNGA150408 turning insert or to request matching holder suggestions, contact Metav Werkzeuge for tailored advice and fast delivery coordination. Technical Data Article number: 6852019 Manufacturer SKU: TUN6852019 Manufacturer: Tungaloy Model series: ISO turning inserts Product designation: DNGA150408 LX10 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 15 mm Geometry angle: 55° Clearance angle: 0° Special features Grade: LX10 Cutting material: carbide Plate form: rhombic Hole: with cylindrical hole Chipbreaker: none Application: turning ISO‑standard insert compatible with matching holders and clamping sets FAQ What materials is the DNGA150408 LX10 insert best suited for? The DNGA150408 LX10 insert is designed for turning steels and a range of alloyed materials where a compromise between wear resistance and edge toughness is required; the LX10 grade supports broad material coverage. Is the insert compatible with standard ISO toolholders? Yes, the DNGA150408 conforms to ISO dimensions and seating forms; compatibility with a specific holder is determined by form, clearance, tolerance class, fastening and thickness. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker; chip control depends on holder geometry and cutting parameters selected for the operation. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge stability and reduces susceptibility to micro‑chipping, making the insert suitable for applications that require a robust cutting edge and predictable tool life. What fastening method is used for the insert? The insert uses a central cylindrical hole for positive indexing and secure clamping with compatible screws and clamp sets specified for ISO turning systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150408 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of wear resistance, precise geometry and ISO compatibility for consistent turning results; benefit from the Tungaloy LX11 grade and the robust carbide substrate for reliable tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. DNGA 150408 LX11 Turning Insert — DNGA150408 LX11 Tungaloy Turn insert for precision turning DNGA150408 LX11 is an ISO‑standard indexable insert designed for general external and internal turning operations where predictable wear behaviour and stable cutting edges are required Rhombic ISO turning insert Tungaloy LX11 grade for wear resistance 0° clearance for rigid cutting 15 mm size, 4.76 mm thickness, with central hole Consistent cutting performance for demanding turning The DNGA150408 LX11 indexable insert combines a carbide substrate with the LX11 cutting grade to deliver stable wear characteristics during continuous turning cycles. The insert’s geometry provides a predictable cutting edge life, reducing process interruptions and improving overall efficiency. By selecting an insert matched to workpiece material and operation type, shops can achieve fewer tool changes and more consistent part quality, supporting higher productivity in batch and single‑piece production. Secure clamping and fit into ISO systems This rhombic insert is manufactured to ISO dimensions and includes a central cylindrical hole to ensure repeatable and secure clamping in compatible holders. The designation 150408 indicates the standardised size and form, which helps to simplify tool inventory and changeover. Compatibility depends on form, clearance angle, tolerance class, fastening and thickness, so the plate integrates smoothly into established ISO toolholder systems and supports efficient reassembly and replacement routines. Geometry that controls chip formation and surface finish With a 0.8 mm corner radius and 0° clearance, the insert is optimised for stable cutting under moderate feeds, promoting controlled chip formation and consistent surface integrity. Although this grade is supplied without a chipbreaker, the combination of the LX11 chemistry and the rhombic contour supports effective chip control in many turning tasks; when more active chip management is needed, pairing with appropriate holder geometry will enhance performance. The result is predictable edge behaviour and reproducible surface finish across batches. Material choice and application benefits explained The insert is produced from a wear‑resistant carbide material and the LX11 specification adds a balance of toughness and edge stability tailored for turning. This composition helps to resist abrasive wear while maintaining edge integrity during interrupted cuts. For shops working across a variety of steels and non‑ferrous materials, the LX11 grade offers broad applicability and reliable tool life, helping to reduce total tooling cost per part and supporting stable machining processes. For wear‑resistant, ISO‑compatible turning with the Tungaloy LX11 insert, contact Metav Werkzeuge for application advice and rapid supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6803163 Manufacturer SKU: TUN6803163 Model series: ISO‑Drehwendeschneidplatten SKU: 6803163-Tungaloy Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° ISO code: 150408 Included hole: with cylindrical hole Angle: 55° Special features Material: carbide Shape: rhombic Grade: LX11 (Tungaloy) Chipbreaker: none Application: turning FAQ What materials is this insert suitable for? The DNGA150408 LX11 insert is intended for turning and, thanks to the LX11 grade and carbide substrate, is suitable for a broad range of steels and common workshop materials where an all‑round turning grade is required. How does the 0.8 mm corner radius affect cutting? A 0.8 mm corner radius provides improved edge strength and a better surface finish at moderate feeds; the larger radius helps distribute cutting forces and reduces the risk of chipping on the cutting edge. Is this insert compatible with standard ISO toolholders? Yes, the DNGA150408 conforms to ISO dimensions and is designed for holders that accept rhombic indexable plates with a central cylindrical hole; correct fit depends on holder form, tolerance class and fastening method. Does the insert include a chipbreaker? This specific grade and geometry is supplied without an integrated chipbreaker; reliable chip control can be achieved by selecting a matching holder geometry or alternative insert grades with dedicated chipbreaker features. Which manufacturer article numbers identify this product? The product is listed under article number 6803163 and manufacturer SKU TUN6803163 for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150408 LX21 Wendeplatten - Tungaloy
Take advantage of the combination of LX21 wear resistance, precise 0.8 mm nose radius and ISO compatibility to maintain steady production quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection and fast availability. DNGA150408 LX21 Tungaloy turning insert — rhombic ISO insert for precision turning, 0.8 mm radius The DNGA150408 LX21 Tungaloy turning insert is an ISO‑standard rhombic indexable plate designed for external and internal turning applications, offering a balanced combination of wear resistance and edge stability. ISO‑standard rhombic insert for turning LX21 grade for wear resistance and edge stability 0.8 mm nose radius for accurate profiling Cylindrical hole and 0° relief for secure clamping Improved tool life through optimised grade and edge stability The LX21 grade from Tungaloy provides a careful balance of wear resistance and toughness, which translates directly into longer tool life and more predictable performance in turning operations. By selecting a grade that emphasises stable cutting edges, machining interruptions are reduced and component quality remains consistent. The ISO configuration ensures repeatable geometry and makes tool replacement straightforward, contributing to lower downtimes and improved process reliability. Precise geometry for consistent surface finish and form turning A 0.8 mm nose radius combined with the rhombic geometry delivers reliable edge engagement for accurate profiling and small-radius contours. The insert’s 0° relief angle and cylindrical hole contribute to a stable clamping interface when paired with a compatible holder, so vibration is minimised and surface finish is improved. Because the system comprises the ISO insert, a matching external holder or boring bar, shims/clamp sets and spare screws, correct assembly preserves the intended cutting geometry and ensures reproducible results. Practical selection guidance for reliable machining For turning tasks, choose the appropriate chipbreaker and grade according to the workpiece material, cutting parameters and machine stability; the supplied insert is provided without a chipbreaker, so match the insert geometry to the machining goal. Compatibility with the clamping system depends on form, clearance angle, tolerance class, fastening, size and thickness, so verify these dimensions when replacing inserts in existing toolholders. Using a carbide substrate tailored for turning operations supports productive material removal while maintaining dimensional accuracy. For personalised tool selection, availability checks or application support for Tungaloy inserts contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and prompt supply Technical Data Article number: 6803164 Manufacturer SKU: TUN6803164 Designation: DNGA150408 Brand: Tungaloy Material: carbide Facts Nose radius: 0.8 mm Plate size: 15 mm Plate thickness: 4.76 mm Angle: 55° Relief angle: 0° Special features ISO turning indexable insert Rhombic plate form LX21 Tungaloy grade Cylindrical hole for clamping Supplied without chipbreaker Intended application: turning FAQ What type of operations is this insert designed for? The insert is intended for external and internal turning; the ISO design and rhombic geometry make it suitable for profiling and standard turning operations with appropriate holders. How does the LX21 grade affect machining performance? The LX21 grade provides a balance of wear resistance and toughness, improving edge stability and delivering longer, more predictable tool life under typical turning conditions. Which clamping features must be checked before replacing an insert? Verify holder compatibility by checking form, relief angle, tolerance class, fastening method, size and thickness to ensure correct fit and stable clamping of the insert. Is a chipbreaker included with the insert? This specification is supplied without a chipbreaker; choose a suitable chip control solution that matches the workpiece material and cutting conditions. Can the insert be used for fine finishing and form work? Yes, the 0.8 mm nose radius and stable geometry are appropriate for fine profiling and achieving consistent surface quality when used with a suitably rigid setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150408 NS520 Wendeplatten - Tungaloy
The combination of the NS520 cermet grade and the precise DNGA150408 geometry ensures consistent surface quality and predictable wear for finishing and light turning operations. Its ISO compatibility and robust carbide construction support reliable cycle times and repeatable component tolerances. Order the DNGA150408 directly via Metav Werkzeuge or consult the specialists for application matching. DNGA150408 NS520 Tungaloy turning insert — rhombic 55° geometry, cermet grade for finishing DNGA150408 NS520 Tungaloy-Wendeplatte is an ISO rhombic insert designed for external and internal turning, optimised for finishing and light machining of steel DNGA geometry with 55° cutting angle Cermet grade NS520 for superior surface finish ISO compatibility; fits holders with cylindrical hole Achieve consistent surface quality and dimensional control The NS520 grade is a cermet formulation developed for finishing to light machining of steel, prioritising surface finish and dimensional accuracy. The combination of a wear-resistant substrate and an engineered coating delivers even flank and nose wear, which reduces the need for frequent rework and keeps tolerances stable across runs. In practice, this means fewer rejects and a higher first-pass yield when precision and visual surface quality are critical. Designed for straightforward integration into ISO tool systems The insert follows ISO standards so compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic shape with a 55° cutting angle and a 0° clearance specification suits many external and internal turning set-ups. The cylindrical hole and the 4.76 mm plate thickness allow secure clamping in common holder systems; a matching shim or clamp set and replacement screws complete the system. This clarity reduces setup time and supports stable, repeatable machining. Cermet characteristics and practical machining guidance Cermet grades such as NS520 combine the hardness of ceramics with the toughness of a metallic binder, giving a cutting edge that excels in fine finishing operations. The substrate is effectively a form of carbide optimised for low built-up edge and consistent wear behaviour. For best results in finishing, maintain moderate cutting speeds and light feeds, monitor tool life visually for even wear progression, and choose a holder that minimises vibration. The insert is supplied without a chipbreaker, so matching the grade and geometry to the workpiece material and machining stability is essential for chip control. For availability, technical matching and order processing contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — the Metav Werkzeuge team can advise on clamping sets, holder compatibility and batch supply. Technical data Article number: 6803165 Manufacturer SKU: TUN6803165 SKU: 6803165-Tungaloy Manufacturer: Tungaloy Numbers / Core technical data Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Insert size: 15 mm ISO designation: 150408 Designs / Special features Rhombic insert form Cylindrical hole for axial fastening Grade: NS520 (cermet / coated cermet) Base material: carbide Application: external and internal turning Supplied without chipbreaker System components: ISO insert, compatible holder, shim/clamp set, replacement screws Typical use: finishing to light machining of steel FAQ What materials is this insert intended for? The DNGA150408 NS520 Tungaloy insert is formulated primarily for machining steel and is optimised for finishing and light turning operations on such materials. Does the insert include a chipbreaker? No, this particular DNGA150408 NS520 insert is supplied without a chipbreaker; chip control depends on grade choice, cutting data and machine stability. Which holders are compatible with this ISO insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the DNGA shape with a cylindrical hole fits holders designed for ISO DNGA inserts. How does the NS520 cermet grade influence tool life and finish? The NS520 cermet grade delivers even wear and a stable cutting edge, which promotes superior surface finish and predictable tool life in finishing applications. Is this insert suitable for internal turning? Yes, the ISO rhombic geometry and secure clamping make the insert suitable for both external and internal turning where finishing is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150408 TH10 Wendeplatten - Tungaloy
High‑precision rhombic insert in uncoated carbide TH10 delivers low cutting forces and clean surface finishes for non‑ferrous turning; the ISO DNGA150408 form with a 0.8 mm corner radius and cylindrical hole ensures secure clamping and simple integration into standard tool systems — order directly via Metav Werkzeuge or consult the technical team for application advice. DNGA150408 TH10 DNGA turning insert (ISO‑rhombic) by Tungaloy A DNGA150408 TH10 rhombic indexable insert engineered for external and internal turning, optimised for non‑ferrous materials and applications that demand low cutting forces and excellent surface quality. DNGA150408 rhombic 55° geometry Uncoated carbide grade TH10 for clean edges 0.8 mm corner radius for fine surface finish Cylindrical hole for secure ISO clamping Consistent cutting with low forces and reliable surface quality The uncoated TH10 carbide grade provides a sharp universal cutting edge that reduces cutting forces and supports clean finishes, particularly with aluminium and other non‑ferrous alloys. Because the grade is uncoated, adhesion and built‑up edge tendencies are minimised in softer materials, which results in more predictable dimensional outcomes and less burr formation. For operations where low cutting resistance and high visual quality of the turned surface are priorities, this geometry and grade combination is a pragmatic choice that balances cutting performance with tool life. Straightforward system integration for predictable process stability The insert conforms to ISO dimensions and is specified as DNGA150408, so compatibility with holders depends on form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic 55° geometry and cylindrical hole enable secure mechanical fixing in standard external holders or boring bars, while the 4.76 mm thickness gives sufficient stability for routine turning tasks. As part of a complete tool system — an ISO insert, a matching external holder or boring bar, a shim/clamp set and spare screws — the component integrates with common tooling workflows to reduce setup time and support repeatable results. Practical application notes and handling recommendations This indexable cutting insert is intended for both external and internal turning; the absence of an integrated chipbreaker means that chip control must be managed through cutting parameters, coolant strategy and mating holder design. The small 0.8 mm corner radius favours fine finishing passes and close tolerance work but requires appropriate cutting data to avoid excessive tool engagement. For heavier roughing or interrupted cuts, choose a holder and machining strategy that provide additional rigidity. If there is any uncertainty about suitability for a specific alloy or cycle, Metav Werkzeuge’s technical advisors can recommend matching holders, clamping kits and cutting data. For reliable non‑ferrous turning choose the Tungaloy DNGA150408 TH10 insert and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 6803166-Tungaloy Manufacturer SKU: TUN6803166 Manufacturer article number: 6803166 Brand: Tungaloy Model series: ISO turning indexable inserts Application: Turning Data Angle: 55° Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Grade: TH10 Material: Carbide Hole: with hole (cylindrical hole) Special features Rhombic plate form (DNGA) ISO‑compliant geometry and tolerances Uncoated carbide grade TH10 for non‑ferrous materials No chipbreaker included Cylindrical hole for screw fixing Compatible with standard external holders and boring bars FAQ What materials is this insert suitable for? The DNGA150408 TH10 Tungaloy turning insert is designed primarily for non‑ferrous materials and applications where an uncoated, sharp cutting edge supports low cutting forces and clean surfaces. Does the insert include a chipbreaker? No, this DNGA150408 insert is supplied without a chipbreaker; chip control should be achieved via cutting parameters, coolant and holder selection. Which holders are compatible with this geometry? Holders and boring bars that accept ISO DNGA‑format inserts and match the 55° geometry, thickness and cylindrical hole fastening will be compatible; compatibility depends on form, clearance angle and tolerance class. What are the key dimensions to check before ordering? Confirm the DNGA150408 designation, 15 mm size, 4.76 mm thickness, 0.8 mm corner radius and the cylindrical hole arrangement to ensure correct fit in the chosen holder. Is this insert suitable for finishing passes? Yes — the small corner radius and sharp uncoated edge make the insert well suited to finishing operations on non‑ferrous alloys when paired with appropriate cutting data and a stable setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150412 BX360 Wendeplatten - Tungaloy
Take advantage of CBN BX360 hardness resistance and the 55° rhombic geometry with a 1.2 mm corner radius for consistent, wear-resistant finishing of hardened steels. The ISO DNGA150412 form ensures broad compatibility with standard holders while the insert’s 0° clearance and 4.76 mm thickness support stable edge engagement. Order the DNGA150412 BX360 directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNGA 150412 BX360 Tungaloy indexable turning insert — CBN grade for hardened steels, 55° rhombic, 1.2 mm radius The DNGA 150412 BX360 is an ISO‑standard indexable turning insert designed for high‑precision external and internal turning of hardened steels and, depending on variant, selected cast irons; its rhombic 55° geometry delivers stable cutting engagement for fine finishing. CBN BX360 for hardened steels and some cast irons Rhombic 55° geometry with 1.2 mm corner radius ISO DNGA150412 — wide holder compatibility No chipbreaker — optimised for finish turning Stable finishing on hardened materials for consistent part quality The use of cubic boron nitride (CBN) in the BX360 grade delivers high wear resistance and thermal stability, which translates into extended tool life during abrasive finishing operations. CBN is a superabrasive specifically engineered for machining hardened steels where conventional carbides wear rapidly; the result is a repeatable edge and consistently precise surface quality. Selecting a CBN grade such as BX360 reduces the frequency of index changes and supports predictable production runs, lowering downtime and improving throughput. Geometry and edge specification that enhance process reliability The 55° rhombic plate form with a 1.2 mm corner radius offers a balance between strength and accessibility to fine contours. A 0° clearance angle and a plate thickness of 4.76 mm contribute to a rigid cutting edge and controlled chip flow when used with properly matched holders. The DNGA platform conforms to ISO dimensions, so compatibility is governed by form, clearance angle, tolerance class, fixing method, size and thickness — ensuring the insert seats correctly in standard clamping systems and maintains consistent cutting geometry across tool changes. Designed for system integration and practical use in production This insert is intended to work as part of a complete system: the indexable plate, a corresponding external holder or boring bar, an underlay/clamp set and replacement screws form the assembly. The presence of a cylindrical locating hole simplifies secure fixation and repeatable positioning. With no integrated chipbreaker, the grade is optimised for finishing passes where surface quality is paramount and minimal edge disturbance is required. The insert’s robust substrate supports high contact loads and stable cutting in demanding serial production. Productivity benefits and application guidance By combining a CBN cutting material with ISO‑compliant geometry, the insert enables lower overall tooling costs through longer edge life and fewer interventions. In practice, the DNGA150412 BX360 is best applied to hard turning operations and final passes on heat‑treated components where dimensional stability and surface finish are critical. For integration into existing tool sets, match the insert form and thickness to the holder specification, and select an appropriate clamping kit to ensure repeatable seating and torque control. The predictable wear characteristics of BX360 also facilitate planning of tool change intervals and process control charts. For tailored advice on integrating the DNGA 150412 BX360 into production or to request availability, contact Metav Werkzeuge for application support and supply details at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Manufacturer article number: 6803173 Manufacturer SKU: TUN6803173 Model series: ISO indexable turning inserts Material: carbide substrate Cutting material: cubic boron nitride (CBN) BX360 Performance figures Geometry angle: 55° Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 15 mm Clearance angle: 0° Designs and special features Rhombic plate shape With cylindrical hole for secure locating No chipbreaker — suited to finishing Intended for turning (external and internal) Suitable for hardened steels; depending on version, cast iron Compatible with ISO holders, underlay/clamp sets and replacement screws FAQ What materials is this insert suitable for? The DNGA 150412 BX360 insert is primarily designed for hardened steels and, depending on the execution, can also be used for selected cast irons; the CBN BX360 grade provides wear resistance and thermal stability for such materials. Is this insert suitable for finish turning operations? Yes. The rhombic 55° geometry, 1.2 mm corner radius and absence of a chipbreaker make the insert particularly well suited to finish turning where surface quality and dimensional accuracy are priorities. How is the insert secured in the toolholder? The insert features a cylindrical locating hole and conforms to ISO DNGA150412 dimensions; compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness — matched holders, clamps and screws ensure repeatable seating. What does the BX360 designation mean? BX360 denotes the CBN grade used on the insert; it characterises the abrasive composition and wear behaviour optimised for hard turning applications and abrasive, wear‑intensive finishing. Can the insert be used for internal turning as well as external turning? Yes. The insert is specified for both external and internal turning within the limits of the holder geometry and the required cutting conditions for hardened materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150412 FX105 Wendeplatten - Tungaloy
Take advantage of the balanced combination of FX105 wear resistance and a 1.2 mm corner radius for stable, repeatable turning results; the DNGA150412 geometry and ISO conformity simplify integration into existing turning tool systems. Order the DNGA150412 FX105 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application advice. DNGA150412 FX105 — ISO turning insert, 55° rhombic, 1.2 mm corner radius by Tungaloy The DNGA150412 FX105 is an ISO‑standard rhombic turning insert engineered for general external and internal turning, combining a balanced carbide grade with a robust edge geometry for industrial production environments. ISO‑standard DNGA geometry, 55° rhombic FX105 Tungaloy carbide grade for wear resistance 1.2 mm corner radius for robust edge strength Cylindrical hole mounting; 4.76 mm plate thickness Predictable tool life through balanced grade and edge strength The FX105 grade, developed by Tungaloy, couples wear resistance with controlled toughness to reduce unexpected tool failures. The insert's cemented carbide composition provides a consistent cutting edge that resists flank wear under repeating cycles, which translates into predictable component quality and fewer unscheduled tool changes. This balance of properties supports higher uptime and improved process stability in batch and continuous turning operations. Accurate fit and secure clamping reduce setup time The ISO‑compliant DNGA geometry with a 55° rhombic outline and a cylindrical hole ensures reliable mounting in standard external holders and boring bars. The combination of plate thickness 4.76 mm and the central hole form provides stable clamping, which reduces vibration and maintains cutting geometry at higher feeds. Clear compatibility markers—form, relief angle, tolerance class, fixing, size and thickness—help to select the correct holder quickly, shortening setup and index time. Robust cutting edge for finishing and medium‑cutting tasks A 1.2 mm corner radius strengthens the cutting edge and distributes cutting forces, which benefits surface finish and tool life during both finishing and medium‑depth turning. The absence of an integrated chipbreaker on this insert means chip control is achieved through compatible toolholder geometry and cutting parameters; this allows adaptation to specific material behaviour while maintaining consistent edge stability and part tolerances. Seamless integration into ISO tooling systems and process workflows Being part of the ISO turning inserts family, this component integrates easily with common toolholding systems, facilitating inventory management and repeatable changeovers. The standardized designation supports transparent tool planning and replacement, helping production engineers to reduce complexity in tool assortments. For workshops aiming for higher process reliability, the insert’s characteristics support longer runs with fewer interventions and clearer tool life forecasting. For robust and repeatable turning operations, request the Tungaloy DNGA150412 FX105 insert from Metav Werkzeuge and receive application support and fast supply—contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations. Technical data Article number: 6803170 SKU: 6803170-Tungaloy Manufacturer SKU: TUN6803170 Manufacturer article number: 6803170 Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Inscribed circle / size: 15 mm Cutting edge angle: 55° Relief angle: 0° ISO designation: 150412 Special features Shape: rhombic (55°) Hole: cylindrical hole Grade: FX105 Material: cemented carbide Plate form: DNGA150412 Application: turning (external and internal) Chipbreaker: without FAQ What machining tasks is this insert intended for? The DNGA150412 FX105 insert is designed for external and internal turning operations where a balanced combination of wear resistance and edge stability is required. How does the FX105 grade influence tool life? FX105 provides a mix of hardness and toughness that reduces flank wear while maintaining edge integrity, extending predictable tool life in repetitive turning applications. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the ISO DNGA geometry and cylindrical hole enable use with standard DNGA holders and boring bars. Is a chipbreaker included on this insert? This variant is supplied without a chipbreaker, allowing chip control to be managed via holder geometry and cutting parameters for specific materials and operations. What are the key dimensions to check before ordering? Important dimensions include the 1.2 mm corner radius, 4.76 mm plate thickness, 15 mm inscribed size and the 55° rhombic geometry (ISO 150412). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150412 LX10 Wendeplatten - Tungaloy
Take advantage of a combination of predictable ISO compatibility, Tungaloy LX10 wear resistance and a robust 1.2 mm corner radius to keep turning operations productive and repeatable; order genuine inserts from Metav Werkzeuge or consult our specialists for application advice. DNGA150412 LX10 indexable insert for turning by Tungaloy — 55° rhombic, 1.2 mm corner radius A DNGA150412 LX10 indexable turning insert engineered for ISO‑standard external and internal turning, offering a balanced mix of wear resistance and edge stability. ISO‑standard 55° rhombic insert Tungaloy LX10 grade for wear resistance 1.2 mm corner radius for robust edge Cylindrical-hole design for secure clamping Consistent, productive cutting performance for turning operations The insert delivers stable cutting edge life thanks to the Tungaloy LX10 grade, which combines wear resistance with sufficient toughness for routine turning tasks. The geometry provides a 55° rhombic profile that supports predictable chip flow and consistent forces during machining, so cycle times remain steady and tool changes are reduced. This results in measurable productivity gains and less unplanned downtime, which is particularly valuable in batch production and mixed small-series work. Predictable fit and secure clamping for reliable toolholding Manufactured to ISO conventions, the plate matches holders by form, clearance angle, tolerance class, fixation and thickness; the rhombic shape and cylindrical hole ensure repeatable seating and secure clamping in compatible external holders or boring bars. The 0° clearance angle and standard fixing interface simplify insert selection when replacing a worn cutting edge, and the absence of a chipbreaker in this variant reduces risk of unexpected material build-up for stable, continuous cuts. Material grade and applications: why LX10 matters Made from cemented carbide and specified for turning, the LX10 grade extends tool life under typical shop conditions while maintaining surface finish quality. The 1.2 mm corner radius offers a compromise between edge strength and finishing capability, making the plate suitable for general external and internal turning across a wide range of steels and more ductile alloys. The insert’s ISO designation and standard thickness allow easy integration into an existing insert inventory, supporting efficient tool management and clear repeatability in production settings. Contact Metav Werkzeuge for tailored advice on using Tungaloy DNGA150412 LX10 inserts in your turning processes, or to request genuine parts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6852021 Manufacturer SKU: TUN6852021 SKU: 6852021-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: DNGA150412 Data Size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Geometry angle: 55° Clearance angle: 0° Special features Material: cemented carbide Grade: LX10 (Tungaloy) Shape: rhombic Hole: cylindrical hole Chipbreaker: without Application: turning FAQ What machining tasks is this insert designed for? This DNGA150412 LX10 indexable insert is intended for external and internal turning applications and is optimised for general turning operations. Which materials can be machined with this grade? The LX10 grade and cemented carbide construction enable machining of a wide range of steels and ductile alloys under standard turning conditions. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge robustness and reduces the likelihood of chipping, improving tool life while still allowing acceptable surface finish in routine turning. Is a chipbreaker included on this variant? This variant is supplied without a chipbreaker, which can be advantageous for continuous cuts and materials that do not require aggressive chip segmentation. How is the insert fixed in the holder? The insert uses a cylindrical central hole for secure clamping in compatible ISO holders; the geometry and tolerance class determine exact holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150412 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of durable carbide grade LX11, a 1.2 mm corner radius and ISO compatibility for stable, productive turning operations; order directly via Metav Werkzeuge or consult our specialists for application guidance. DNGA 150412 LX11 Turning Indexable Insert – Rhombic, 55° by Tungaloy DNGA150412 LX11 Tungaloy indexable insert designed for external and internal turning with ISO compatibility and a balanced mix of wear resistance and edge stability ISO rhombic insert DNGA150412 LX11 Carbide grade LX11 for wear resistance 55° approach angle for versatile turning Cylindrical hole, 4.76 mm plate thickness Consistent cutting performance and edge stability for productive turning The DNGA150412 LX11 insert is manufactured from carbide and formulated to combine wear resistance with sufficient toughness for everyday turning tasks. The rhombic geometry paired with the 1.2 mm corner radius delivers a reliable cutting edge that reduces edge chipping when machining general profiles. The 55° approach angle provides a balance between cutting force and surface finish, enabling dependable material removal rates while maintaining dimensional control. Overall, the specification supports continuous, predictable tool life in stable setups. Standardised fit and secure clamping within ISO systems Designed to the ISO plate family, the insert integrates with matching external holders or boring bars where compatibility is determined by plate form, ISO designation, relief angle, tolerance class, fastening method, size and thickness. The presence of a cylindrical hole permits positive clamping in many standard saddles and locators, while the 4.76 mm plate thickness contributes to rigidity in the tool assembly. These features simplify toolholder selection and help minimise runout and vibration when the insert is seated and secured correctly. Practical guidance for adapting to different turning operations This insert is supplied without a chipbreaker and is intended for turning; choose a suitable chipcontrol geometry or variant when required by the workpiece material and the machining strategy. The LX11 grade emphasises a practical compromise between abrasive wear resistance and cutting-edge stability, making it well suited to general turning scenarios. For interrupted cuts or particularly tough workpiece surfaces, consider optimised holder support and toolpath settings to protect the cutting edge and maintain process reliability. Reliable integration into production workflows for better process stability Using an ISO-standard rhombic insert such as this supports repeatable setup routines and inventory management across multiple lathes or cells. The combination of an internationally recognised plate form, consistent corner radius and a robust carbide grade contributes to fewer unexpected stoppages and reduced scrap. When mounted in an appropriately specified holder with the correct clamping kit and screws, the insert helps sustain steady production throughput and reproducible surface quality. For robust, long‑lasting turning performance with the Tungaloy LX11 grade, contact Metav Werkzeuge for tailored technical advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6803171 Manufacturer SKU: TUN6803171 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNGA150412 LX11 Facts Corner radius: 1.2 mm Approach angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features Rhombic plate form Cylindrical hole Carbide material Grade LX11 Supplied without chipbreaker ISO-compatible indexable insert Intended for turning (external and internal) FAQ What materials is this insert suitable for? The DNGA150412 LX11 insert is a carbide turning grade designed to balance wear resistance and edge stability; selection of a specific chipcontrol or grade variant is recommended based on the actual workpiece material. How is the insert mounted in a toolholder? The insert fits ISO-compatible external holders or boring bars and is secured using the cylindrical hole and compatible clamping sets or screws; correct seating and tolerance class matching are essential for secure clamping. Does the insert include a chipbreaker? The plate is supplied without a chipbreaker; a suitable chipcontrol geometry should be chosen separately according to material and cutting conditions. What benefits does the 1.2 mm corner radius provide? A 1.2 mm corner radius offers improved edge strength and reduced risk of chipping compared with very small radii, supporting stable surface quality in general turning operations. Which holder geometry complements the 55° approach angle? Holders designed for rhombic plates with a 55° approach angle provide a compromise between cutting force distribution and access to external and internal profiles, supporting versatile turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150412 LX21 Wendeplatten - Tungaloy
Take advantage of the combination of robust LX21 grade performance, precise 55° rhombic geometry, and a secure clamping concept for uninterrupted turning operations; order directly via Metav Werkzeuge or contact our consultants for tailored advice. DNGA 150412 LX21 ISO turning insert — Tungaloy The DNGA150412 LX21 is an ISO-standard indexable insert engineered for external and internal turning, combining a 55° rhombic geometry with a 1.2 mm nose radius for reliable finishing and semi-finishing operations ISO 55° rhombic geometry for versatile turning LX21 grade for wear resistance and edge stability Carbide substrate with 1.2 mm nose radius Cylindrical hole for secure clamping, 4.76 mm thick Proven geometry for consistent machining The insert’s 55° rhombic geometry provides a balance between accessibility and cutting strength: the geometry enables entry into confined features while maintaining a load-bearing face that reduces vibration. This shape is particularly effective for general-purpose turning where both profile accuracy and surface finish matter. The design supports both external and internal operations and, when paired with an appropriate holder, contributes to stable chip formation and predictable tool life. Grade and substrate engineered for productivity The LX21 designation denotes a Tungaloy cutting grade optimised for turning, focusing on wear resistance, edge stability and sufficient toughness for a broad range of steels and alloyed materials. Manufactured on a carbide substrate, the grade is intended to extend periods between index changes and reduce unplanned tool interventions. For production environments where uptime and repeatability are critical, the combined effect of substrate and grade results in a measurable improvement in process reliability and cost-efficiency. Compatibility and secure clamping for series production As an ISO turning insert, the component is compatible with ISO holders that match the insert form, relief angle, tolerance class, fastening method, size and thickness. The central cylindrical hole ensures repeatable seating and positive clamping with standard screws and clamps, while the 4.76 mm thickness enhances rigidity in heavy or interrupted cuts. The item’s specification should be checked against the toolholder’s seat and screw geometry to guarantee proper fit and to preserve repeatable concentricity in serial machining. Practical selection and set-up guidance for best results For finishing passes where surface quality is paramount, the 1.2 mm nose radius provides a good compromise between detail reproduction and edge strength; larger radii improve tool life but reduce access to tight profiles. The insert is supplied without a chipbreaker, so a compatible chip control strategy should be selected at the holder level according to material and cutting conditions. Where uncertainty exists about holder choice, clamping torque or recommended cutting parameters, consultation with Metav Werkzeuge ensures an application-optimised set-up and helps to avoid costly trial-and-error. For secure, high-productivity turning with Tungaloy’s LX21 grade, contact Metav Werkzeuge for expert application advice and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6803172 SKU: 6803172-Tungaloy Model series: ISO turning inserts Designation: DNGA150412 Application: Turning Shape: Rhombic 55° Facts Nose radius: 1.2 mm Insert size: 15 mm Thickness: 4.76 mm Relief angle: 0° Hole style: cylindrical (with hole) Chipbreaker: none Special features Material: carbide Grade: LX21 (Tungaloy) Geometry: 55° rhombic Compatibility: ISO-standard holders Intended use: external and internal turning FAQ What materials is this insert intended to machine? The LX21 Tungaloy grade is designed for turning a broad range of steels and alloyed materials; the carbide substrate and grade combination deliver wear resistance and edge stability in typical turning applications. How does the 55° geometry affect machining performance? A 55° rhombic geometry provides a balance between cutting edge strength and access to profiles, improving surface finish and stability in both external and internal turning tasks. Is this insert supplied with a chipbreaker? No, the insert is supplied without a chipbreaker; chip control should be achieved via holder selection or process parameters suited to the work material and operation. Which holders are compatible with this insert? Compatibility is determined by the ISO form, relief angle (0°), tolerance class, fastening method and insert thickness; ensure the holder seat matches the DNGA150412 specification for correct clamping. What is the recommended use of the 1.2 mm nose radius? The 1.2 mm nose radius is suitable for finishing and semi-finishing operations where a compromise between surface quality and edge robustness is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150416 FX105 Wendeplatten - Tungaloy
Benefit from the combination of FX105 wear resistance and the ISO‑standard rhombic form for predictable cutting performance and simplified tool management; the robust corner radius and secure cylindrical hole ensure stable clamping and fewer interruptions in turning operations. Order the DNGA150416 directly via Metav Werkzeuge or ask our consultants if needed. DNGA150416 FX105 Tungaloy indexable turning insert — rhombic 55° with cylindrical hole The DNGA150416 FX105 is an ISO rhombic indexable insert designed for turning applications, delivering consistent edge stability and straightforward integration with standard holders. ISO rhombic shape with 55° included angle FX105 grade for wear resistance and toughness Cylindrical hole for secure clamping 1.6 mm corner radius for robust cutting edge Engineered for consistent turning performance The rhomboid geometry with a 55° included angle provides a balanced approach to cutting forces, making this indexable plate particularly suitable for both finishing and medium turning. Manufactured from cemented carbide, the insert offers a reliable substrate that supports the FX105 grade, which has been developed to combine wear resistance with sufficient toughness. Compatibility with ISO holders is ensured by standardised dimensions and the cylindrical hole, so integration into existing tool setups is straightforward while maintaining repeatable positional accuracy. Grade and edge geometry that extend tool life The FX105 grade complements the insert geometry to deliver a predictable wear pattern and improved edge stability during interrupted cuts. A corner radius of 1.6 mm increases edge robustness and reduces the risk of premature chipping, which translates into longer intervals between index changes. The free clearance angle of 0° helps maintain contact conditions and supports a consistent cutting engagement; this results in controlled tool wear and a lower risk of unexpected downtime in production environments. Seamless compatibility with standard holders and systems Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; the plate’s ISO designation and dimensional values simplify selection for existing toolholders. The plate thickness of 4.76 mm and size designation 15 match common ISO holder families, and the cylindrical hole ensures secure fixing when used with a matching underlay or clamping set. The insert’s straightforward geometry reduces setup time and contributes to stable machining parameters across different batches and operators. Practical benefits for continuous production Incorporating this insert into a turning line reduces handling complexity and contributes to process reliability. The combination of a robust carbide substrate, the FX105 grade and the defined geometry supports longer tool life and more predictable cycle times. For production-focused shops, this means fewer tool changes, more consistent surface quality and the potential to optimise cutting data for higher throughput. The plate is intended for turning; selecting an appropriate chipbreaker and grade for the workpiece material will further improve chip control and overall efficiency. For robust, production-ready turning with Tungaloy reliability and FX105 performance, contact Metav Werkzeuge for ordering and technical advice via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: 6803176 Manufacturer SKU: TUN6803176 Item SKU: 6803176-Tungaloy Designation: DNGA150416 FX105 Tungaloy insert Facts Corner radius: 1.6 mm Included angle: 55° Thickness: 4.76 mm Size designation: 15 Free clearance angle: 0° Hole: cylindrical Special features Material: cemented carbide Grade/coating: FX105 (Tungaloy) Plate form: rhombic Hole style: cylindrical hole Chipbreaker: none Application: turning System: ISO indexable turning plate Compatibility factors: form, relief angle, tolerance class, clamping, size, thickness FAQ Which turning operations is this insert intended for? The DNGA150416 FX105 indexable turning insert is intended for external and internal turning; its geometry and grade are suitable for finishing and medium turning tasks when paired with the correct chipbreaker and cutting data. How does the FX105 grade improve performance? FX105 provides a balanced combination of wear resistance and toughness that enhances edge stability under typical turning loads, which helps to extend the service life of the DNGA150416 insert in continuous production. Can the insert be used with standard ISO holders? Yes, the DNGA150416 is an ISO‑standard plate; the cylindrical hole and dimensional specifications (thickness 4.76 mm, size 15) permit secure clamping in compatible holders, provided the holder matches the form, relief angle and tolerance class. Does this insert include a chipbreaker? The DNGA150416 FX105 insert is supplied without a chipbreaker; chip control should be selected according to workpiece material and the machining strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150604 LX10 Wendeplatten - Tungaloy
Benefit from ISO-standard geometry and the LX10 Tungaloy grade for improved wear resistance and edge stability; the rhombic 55° form and cylindrical hole ensure secure clamping and predictable performance in turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants for compatibility advice. DNGA150604 LX10 ISO turning insert for turning by Tungaloy The DNGA150604 LX10 is an ISO-standard rhombic turning insert engineered for external and internal turning, combining a carbide substrate with an LX10 grade for balanced wear resistance and edge stability ISO-standard rhombic geometry LX10 grade for wear resistance Carbide substrate for long tool life Cylindrical hole for secure clamping Predictable machining performance with ISO geometry The DNGA150604 LX10 insert delivers consistent cutting behaviour through its ISO-standard rhombic shape and a 55° cutting angle, offering stability in a wide range of turning tasks. The carbide substrate provides a solid basis for productive cutting, while the LX10 grade adds a tailored balance of wear resistance and toughness, maintaining edge integrity under intermittent and continuous cuts. By reducing unexpected flank wear, the insert supports steady cycle times and fewer tool changes, which is critical for workshop efficiency. Secure clamping and straightforward compatibility Designed with a cylindrical hole and a 6.35 mm plate thickness, the insert is compatible with ISO holders when matched by form, relief angle, tolerance class, fastening, size and thickness. The 0° relief angle and a 0.4 mm corner radius give a compromise between edge strength and surface finish; a small radius increases edge durability while still enabling acceptable workpiece quality. The absence of a chipbreaker means selection of a suitable holder and cutting parameters is important to control chip formation in specific materials. Application range and practical benefits for turning operations Suited to general turning tasks, the rhombic insert is a practical choice for workshops producing external and internal features where repeatability matters. The LX10 grade complements the geometry, aiming to provide stable chip formation, reliable edge life and predictable regrinding intervals. A typical system comprises the ISO insert, a matching external holder or boring bar, a clamping pad or clamp set and replacement screws, enabling rapid changeovers and minimal setup complexity for serial production. For reliable industrial turning with Tungaloy’s LX10 grade and DNGA150604 geometry, contact Metav Werkzeuge for technical advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6852022 Manufacturer SKU: TUN6852022 SKU: 6852022-Tungaloy Designation: DNGA150604 LX10 Tungaloy insert Numbers / Core technical data Size: 15 mm Thickness: 6.35 mm Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 0° Manufacturer article number: 6852022 Designs / Special features Material: carbide Grade: LX10 Plate form: rhombic Hole style: cylindrical hole Chipbreaker: none Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What applications are suitable for this insert? The DNGA150604 LX10 insert is intended for external and internal turning, providing a balanced solution for general turning tasks in production environments. How does the LX10 grade affect performance? The LX10 grade enhances the insert’s wear resistance and edge stability, which helps to extend tool life under a variety of cutting conditions. Which clamping system is required for this insert? The insert uses a cylindrical hole and 6.35 mm thickness; clamping compatibility depends on matching holder form, relief angle, tolerance class, fastening, size and thickness. What does the 0.4 mm corner radius mean for surface finish and strength? A 0.4 mm corner radius increases edge strength and resistance to notch wear while offering a reasonable surface finish—suitable for applications where durability is prioritised. Is a chipbreaker included with the insert? This insert is supplied without a chipbreaker, so the choice of holder and cutting parameters should be adapted to control chip formation for the intended material. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150604 LX11 Wendeplatten - Tungaloy
Take advantage of a proven ISO‑standard turning solution that combines Tungaloy LX11 carbide durability with a secure rhombic mounting for consistent productivity; the DNGA form and 55° cutting geometry ensure versatile external and internal turning. Order the insert directly via Metav Werkzeuge or consult the technical advisors for integration into existing holder systems. DNGA150604 LX11 Tungaloy turning insert — ISO rhombic insert for turning The DNGA150604 LX11 Tungaloy insert is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a 55° cutting edge geometry and a secure cylindrical hole for reliable clamping. ISO‑standard rhombic insert DNGA shape Tungaloy LX11 grade for wear resistance 55° cutting geometry for versatile turning Cylindrical hole and 6.35 mm thickness for secure clamping Consistent seating and quick interchangeability for reduced setup time The ISO-standard rhombic design delivers predictable seating and orientation in compatible holders, since compatibility is defined by form, clearance angle, tolerance class, clamping method, size and thickness. With a 55° cutting angle and a cylindrical hole for secure fastening, the insert provides repeatable positioning that reduces setup errors and machine downtime. This mechanical stability benefits serial production where consistent datum and repeatability are required, and it simplifies stockkeeping through ISO conformity. Balanced carbide grade for dependable edge life under varied conditions The Tungaloy LX11 grade is a tungsten carbide type formulated to balance wear resistance and toughness, delivering edge stability across common turning tasks. The grade complements the insert geometry to withstand abrasive wear while maintaining a stable cutting edge under intermittent cutting loads. For production environments where both tool life and surface quality matter, this combination helps maintain component tolerances and reduces the frequency of insert changes. Practical system integration and process guidance for turning operations Designed without an integrated chipbreaker (without chipbreaker), the insert is intended for systems where the holder or process parameters control chip formation; selection of the appropriate chip control and the matching holder is therefore essential. Typical system composition comprises an ISO insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws. The 0.4 mm corner radius supports smooth transitions between finishing and light roughing passes, giving a useful compromise between surface finish and edge strength. For reliable turning performance with the Tungaloy LX11 grade and DNGA geometry, contact Metav Werkzeuge for technical consultation and rapid supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6813939 Manufacturer SKU: TUN6813939 Designation: DNGA150604 LX11 Tungaloy insert Brand: Tungaloy Core technical data Material: carbide Grade: LX11 Thickness: 6.35 mm Inscribed circle/size: 15 mm Corner radius: 0.4 mm Cutting edge angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features ISO turning insert, rhombic plate form Intended application: turning (external and internal) Supplied without chipbreaker Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness System composition: ISO insert, external holder or boring bar, shim/clamp set and spare screws FAQ What holders are compatible with this insert? Compatibility depends on holder geometry and clamping system; the DNGA150604 LX11 insert fits ISO‑standard holders with DNGA seating and a matching 55° geometry. Can the insert be used for both external and internal turning? Yes, the insert is intended for external and internal turning when paired with an appropriate external holder or boring bar and the correct process parameters. Does the insert include a chipbreaker? The DNGA150604 LX11 insert is supplied without chipbreaker; chip control should be provided by the holder geometry or cutting parameters. What is the significance of the LX11 grade? The LX11 carbide grade from Tungaloy provides a balance of wear resistance and toughness, supporting stable cutting edges and extended life in varied turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150608 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, Tungaloy LX10 grade and robust cemented carbide construction for consistent turning performance; order directly via Metav Werkzeuge or request application advice from our consultants. DNGA 150608 LX10 turning insert for turning — Tungaloy The DNGA150608 LX10 is a rhombic ISO turning insert engineered for external and internal turning tasks, offering a balanced mix of wear resistance and edge stability for industrial metalcutting. ISO-standard rhombic insert, 55° geometry LX10 Tungaloy grade for wear resistance 0.8 mm corner radius for versatile turning Cylindrical hole for secure clamping Improve cycle reliability with standardised geometry The ISO-standard rhombic geometry and 55° cutting angle deliver predictable cutting forces and repeatable chip control across production batches. Manufactured from cemented carbide, the insert is designed to maintain cutting-edge integrity under common turning conditions. This stability reduces unexpected downtime and enables planners to rely on constant tool behaviour, supporting tighter process windows and predictable tool-life planning. Designed for simple integration into existing tool systems Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; the insert therefore integrates cleanly into ISO toolholders and boring bars. The cylindrical hole and matching clamping seat permit secure fixation, while the chamfered seating of the DNGA form helps ensure correct orientation. The system approach—insert, external holder or boring bar, shim/clamping set and spare screws—simplifies procurement and spares management on the shop floor. LX10 grade: balanced wear resistance and edge toughness The LX10 Tungaloy grade delivers a tailored compromise between wear resistance and toughness, making it suitable for a broad range of turning operations. This balance supports longer intervals between index changes and preserves dimensional control on parts that require consistent surface quality. For operations where flank wear and edge chipping are competing failure modes, the chosen grade helps reduce the frequency of corrective interventions. Practical design that eases setup and repeatability Key dimensions such as the 0.8 mm corner radius and 6.35 mm plate thickness contribute to stable cutting behaviour and predictable insert life. The 0° relief angle and rhombic plate shape aid in producing accurate profiles while the ISO designation (150608) supports straightforward identification during tool changes. Together, these design choices simplify setup, reduce adjustment time and support steady throughput on medium‑duty turning operations. Contact Metav Werkzeuge for tailored application advice on Tungaloy LX10 inserts and to confirm stock availability and delivery options Technical data Manufacturer article number: 6852023 SKU: 6852023-Tungaloy Model series: ISO turning inserts Material: cemented carbide Dimensions & core data Insert designation: DNGA150608 ISO code: 150608 Insert size: 15 Thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Geometry angle: 55° Design & features Rhombic plate form Cylindrical hole, with hole Grade: LX10 (Tungaloy) No chipbreaker (plain cutting edge) Intended use: turning Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness System components: ISO insert, suitable external holder or boring bar, shim/clamping set and spare screws FAQ What turning operations is this insert intended for? The DNGA150608 LX10 Tungaloy insert is intended for external and internal turning applications where a balanced combination of wear resistance and toughness is required. Which clamping method suits this insert? The insert features a cylindrical hole and is designed for secure clamping in ISO-compatible holders and boring bars; proper clamping ensures repeatable positioning of the DNGA150608 LX10 insert. How does the LX10 grade affect tool life? The LX10 Tungaloy grade provides a compromise between wear resistance and edge toughness, which typically extends usable life in mixed turning conditions while reducing the risk of sudden edge chipping. Can this insert be used with chipbreakers? This specific variant is supplied without a chipbreaker; chip control should be achieved by selecting the appropriate grade, geometry and cutting parameters or by pairing with holders designed for chip evacuation. Which dimensions are critical when selecting a matching toolholder? Match the insert by form, 55° geometry, relief angle (0°), thickness (6.35 mm), size (15) and corner radius (0.8 mm) to ensure correct fit and performance of the DNGA150608 LX10 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150608 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of ISO DNGA form, the LX11 Tungaloy carbide grade and precise geometric specifications to achieve reliable chip control and long tool life in turning operations; order directly via Metav Werkzeuge or consult our team for application support. DNGA150608 LX11 — Tungaloy turning insert (ISO 150608, rhombic, 55°) A DNGA150608 LX11 Tungaloy turning insert designed for external and internal turning, compatible with ISO-standard holders and optimised for stable cutting performance. ISO DNGA 150608 rhombic insert LX11 Tungaloy carbide grade 55° cutting angle for stable turning Cylindrical hole, 6.35 mm plate thickness High-precision geometry for consistent cutting results The DNGA-series geometry offers a 55° cutting angle and rhombic form that combine to provide a secure seating in ISO holders and predictable cutting forces. With a corner radius of 0.8 mm and a 6.35 mm plate thickness, the insert maintains edge strength during interrupted cuts and heavier cross-sections, reducing vibration and promoting consistent surface finish. The ISO specification ensures straightforward matching to standard external holders, so changeovers are rapid and setup times are minimised. Emphasis on geometry translates directly into fewer rejects and smoother production flow. Carbide grade LX11: balance of wear resistance and edge stability The proprietary LX11 grade from Tungaloy is engineered to balance wear resistance and toughness for general turning applications. Manufactured from high-quality carbide, the grade stabilises the cutting edge under a range of cutting speeds and feed rates, extending usable life compared with ungraded inserts. The absence of an integrated chipbreaker makes the insert versatile for finishing and semi-finishing operations where controlled chip formation is achieved through suitable cutting parameters and holder geometry. Specifying this grade reduces the need for frequent insert changes, improving uptime and lowering per-part tooling cost. Compatibility, handling and application range Designed with a cylindrical hole and ISO-conforming form, the insert integrates with common clamping systems and can be used for both external and internal turning when paired with appropriate holders. The 0° relief angle supports neutral cutting geometry, suitable for a broad spectrum of materials typically encountered in workshop and production settings. Material coverage is governed by grade selection and cutting data; this insert is aimed at general turning tasks where a reliable compromise between life and edge stability is required. Clear identification by the ISO designation facilitates inventory management and ordering. For a precise evaluation of the insert for specific materials or machining strategies, contact Metav Werkzeuge for tailored advice and fast supply; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery. Technical Data Article number: 6803178 Manufacturer SKU: TUN6803178 External SKU: 6803178-Tungaloy Model series: ISO turning indexable inserts Application: Turning Material: Carbide Facts ISO designation: 150608 Insert form: DNGA (rhomboid, 55°) Corner radius: 0.8 mm Plate thickness: 6.35 mm Plate size: 15 mm Special features Grade: LX11 (Tungaloy) Hole: cylindrical hole Relief angle: 0° Chipbreaker: none Compatibility: fits ISO-standard external holders FAQ What material range is suitable for this insert? The DNGA150608 LX11 insert is intended for general turning tasks; the LX11 carbide grade provides a balance of wear resistance and toughness suitable for a wide range of steels and alloyed materials under conventional cutting conditions. Is the insert suitable for internal turning? Yes. The rhombic DNGA form and cylindrical hole allow the insert to be mounted for both external and internal turning when used with the correct holder geometry and clamping components. How does the corner radius affect surface finish and tool life? A 0.8 mm corner radius increases edge strength, which helps maintain surface finish during heavier cuts and improves edge stability, leading to longer effective tool life compared with smaller radii. Does this insert include a chipbreaker? This specific variant is supplied without a chipbreaker, making it suitable for finishing and semi-finishing where chip control is managed by toolpath and holder selection rather than an integrated breaker. Which SKU identifies the original Tungaloy part? The Tungaloy manufacturer article number is 6803178 and the manufacturer SKU is TUN6803178, which identify this original, brand-new insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150612 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑compliant geometry, the LX10 carbide grade and a robust 1.2 mm corner radius for consistent turning performance and predictable tool life; contact Metav Werkzeuge for tailored holder recommendations or to request further technical data. DNGA150612 LX10 DNGA turning insert (ISO 150612) by Tungaloy, 55° geometry The DNGA150612 LX10 is an ISO‑standard rhombic indexable insert engineered for general external and internal turning, offering a balanced mix of wear resistance and edge stability for productive machining. ISO‑compliant rhombic shape LX10 Tungaloy carbide grade 55° cutting angle for versatile turning 1.2 mm corner radius, 6.35 mm thickness Consistent cutting performance for general turning This insert is designed as an ISO‑standard rhombic plate that delivers stable cutting when mounted in the correct holder geometry. The 55° cutting angle combined with the 1.2 mm corner radius produces a dependable cutting edge that maintains dimensional control during external and internal turning. The geometry minimises vibration under moderate feed and depth‑of‑cut conditions, so machining cycles run with predictable results and repeatable surface finish quality. Clear guidance on compatibility and secure clamping Compatibility with a toolholder is determined by form, clearance angle, tolerance class, attachment method, size and thickness. The DNGA format requires a holder designed for rhombic plates with a 0° clearance angle and a locating feature for a cylindrical hole, ensuring positive location and reliable clamping. Together with the matching shim or clamp set and replacement screws, the system provides quick insert changes and repeatable seating without time‑consuming adjustments. LX10 carbide grade: wear resistance and edge stability The LX10 Tungaloy grade complements the insert geometry by emphasising wear resistance, toughness and cutting‑edge stability. This combination supports longer in‑process life and reduced flank wear under a range of turning conditions, helping to maintain consistent part tolerances over production runs. The carbide substrate and coating selection are chosen to suit general turning tasks where balanced performance is required rather than extremes of speed or hardness. Practical applications and setup recommendations For best results in external and internal turning, pair the insert with a suitable external holder or boring bar and select a chipbreaker and grade aligned to workpiece material, machining strategy and machine stability. The plate thickness of 6.35 mm and an insert size of 15 mm provide structural rigidity for moderate cutting forces. When repeatability and quick indexability are priorities, the DNGA format simplifies process planning and minimises downtime during insert changes. Discuss application requirements and procurement with Metav Werkzeuge for optimal holder selection and machining parameters for the LX10 grade insert; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852041 Manufacturer SKU: TUN6852041 SKU: 6852041-Tungaloy Model series: ISO‑indexable turning inserts Material: carbide ISO designation: 150612 Dimensions and numeric data Corner radius: 1.2 mm Thickness: 6.35 mm Insert size: 15 mm Cutting angle: 55° Clearance angle: 0° Design and special features Rhombic plate shape With hole: cylindrical hole Grade: LX10 (Tungaloy) No chipbreaker ISO‑compliant geometry System: insert, holder, shim/clamp set and screws FAQ Is this insert suitable for both external and internal turning? Yes. The DNGA150612 LX10 indexable insert is intended for external and internal turning and offers geometry and grade characteristics suitable for a wide range of turning tasks. What are the key dimensions and geometry of the insert? The insert has a corner radius of 1.2 mm, a thickness of 6.35 mm and a 55° cutting angle; it is a rhombic ISO‑format plate with a cylindrical locating hole. How is the insert clamped and what should be matched to the holder? The insert locates on a cylindrical hole and requires a holder matching form, clearance angle, tolerance class, attachment method, size and thickness to ensure secure clamping and repeatable seating. Which grade is fitted and what does it deliver in service? The LX10 Tungaloy grade provides a balanced combination of wear resistance, toughness and cutting‑edge stability, supporting longer tool life and consistent performance under general turning conditions. Are there special recommendations for setup? Use a holder designed for DNGA geometry, check that the clamping parts and screws match the plate thickness, and select a chipbreaker/grade combination appropriate to the workpiece material and machine rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com