DNGA 150612 LX11 Wendeplatten - Tungaloy
The combination of ISO conformity, the LX11 cutting grade and a 1.2 mm corner radius delivers reliable edge stability and predictable tool life for turning operations. Order the DNGA150612 LX11 insert directly via Metav Werkzeuge or ask our consultants if needed. DNGA150612 LX11 rhombic indexable insert for turning, 55° included angle — Tungaloy The DNGA150612 LX11 is an ISO-standard rhombic indexable insert intended for external and internal turning applications, designed to balance wear resistance with edge stability for consistent machining performance. ISO-standard rhombic geometry, 55° included angle LX11 grade carbide for improved wear resistance 1.2 mm corner radius, cylindrical-hole fastening Longer productive runs through stable cutting edges The LX11 grade in this indexable insert provides a calculated mix of wear resistance and toughness, which reduces unscheduled tool changes and keeps cycle times steady. The rhombic geometry with a 55° included angle supports versatile cutting directions and contributes to predictable chip flow, while the 1.2 mm corner radius increases edge strength for interrupted cuts and enhances surface quality when used for semi-finish and finish passes. By choosing this configuration, production planners secure a tangible efficiency advantage in batch and single‑piece turning. Precise fit and system compatibility for consistent setup This insert follows ISO plate standards and is secured via a cylindrical hole; compatibility with a toolholder depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness. The supplied geometry and a 6.35 mm plate thickness ensure a rigid seating in appropriate rhombic holders or boring bars, reducing micro‑movement and vibration at the cutting edge. For shopfloor integration, plan the toolholder, shim/clamp set and replacement screws as a system — this reduces setup time and helps maintain repeatable tool positions across multiple machines. Grade characteristics explained for correct application choice The LX11 carbide composition complements the insert geometry by prioritising a balance between longevity and edge stability rather than extreme hardness alone. The absence of an integrated chipbreaker on this variant means it is optimised for operators who select their chip control strategy via toolpath, feed rate or external chip control devices; it is particularly suitable where surface finish and controlled cutting forces are priorities. In practical terms, this means the insert can serve a range of turning tasks when combined with the correct machining parameters and holder stability. For machining processes demanding consistent edge life with the LX11 grade, request stock and technical advice from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6803179 SKU: 6803179-Tungaloy Manufacturer SKU: TUN6803179 Model series: ISO turning indexable inserts Designation: DNGA150612 Grade: LX11 Material: carbide Shape: rhombic Hole: cylindrical hole Fastening: with hole Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 mm Included angle: 55° Clearance angle: 0° Chipbreaker: without Special features ISO-standard rhombic insert Designed for external and internal turning LX11 grade for balanced wear resistance and toughness Cylindrical-hole fastening for secure clamping No integrated chipbreaker — chip control via process parameters System components: insert, matching holder or boring bar, shim/clamp set, replacement screws FAQ What applications is this insert designed for? The DNGA150612 LX11 indexable insert is designed for external and internal turning operations and is suitable for a variety of turning tasks when combined with the appropriate holder and machining parameters. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and improves resistance to chipping during interrupted cuts, while also contributing to a smoother surface finish when cutting parameters are set accordingly. Is a chipbreaker included with this plate? This variant is supplied without a chipbreaker; the absence of an integrated chipformer makes the DNGA150612 LX11 appropriate where chip control is managed by feed, speed, toolpath or external devices. Which holder characteristics must be matched for correct usage? Holder compatibility requires matching the insert form, clearance angle, tolerance class, fastening style, size and thickness so the insert seats rigidly and reliably during turning operations. Can the DNGA150612 LX11 be used for heavy interrupted cuts? The LX11 grade is formulated to balance wear resistance and toughness, and combined with a suitable holder and correct cutting data it performs well in many demanding turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150616 LX10 Wendeplatten - Tungaloy
The combination of LX10 carbide grade, a 1.6 mm corner radius and ISO compatibility delivers a robust, wear-resistant solution for productive turning operations; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific selection. DNGA 150616 LX10 indexable insert — ISO rhombic insert for turning by Tungaloy DNGA150616 LX10 Tungaloy indexable insert is an ISO‑standard rhombic insert designed for external and internal turning applications, compatible with ISO holders and clamping systems. ISO rhombic DNGA geometry LX10 carbide grade by Tungaloy 1.6 mm corner radius for robustness 0° clearance angle for consistent engagement Engineered for consistent turning performance The LX10 grade, developed by Tungaloy, pairs wear resistance with sufficient toughness to maintain cutting‑edge stability over prolonged cycles. As an ISO rhombic indexable insert, this component is intended for a broad range of turning tasks where repeatable edge life and predictable tool change intervals improve throughput. Compatibility with standard holders is ensured by the ISO designation, while the insert’s carbide substrate supports higher feed rates with reliable wear behaviour. Dimensioned to improve process stability and part quality A 1.6 mm corner radius and 6.35 mm plate thickness increase contact area and aid in absorbing cutting forces, reducing vibration in interrupted cuts. The 0° clearance angle provides a neutral shear condition suitable for general turning, while the 55° approach angle supports stable cutting geometry for many external and internal operations. These measurable characteristics help maintain surface finish and reduce scrap rates when the tool is matched to the machining parameters. Straightforward integration into ISO tool systems The insert is supplied in the ISO form DNGA150616 with a through‑hole (cylindrical) seat for secure clamping; the overall system comprises the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws as required. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, which simplifies procurement and replacement planning. Clear ISO conformity reduces setup time and eases stock management for production lines. Practical guidance for selecting and applying the insert Use this insert for general external and internal turning where a robust corner radius and a balanced carbide grade are advantageous; select a chipbreaker and cutting parameters according to material, machining type and machine rigidity. The grade complements the geometry to provide the required balance of wear resistance and edge integrity, especially in mixed‑batch production where repeatable performance matters. For unusual materials or exceptionally high‑speed applications, consult Metav Werkzeuge’s technical advisers to match holder geometry and cutting data precisely. Contact Metav Werkzeuge to confirm suitability of the DNGA150616 LX10 insert for specific workpieces and to arrange supply or technical advice; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852042 Manufacturer SKU: TUN6852042 SKU: 6852042-Tungaloy Model series: ISO turning indexable inserts Designation: DNGA150616 LX10 Material: Carbide Facts Corner radius: 1.6 mm Plate thickness: 6.35 mm Plate size: 15 mm Clearance angle: 0° Approach/cutting angle: 55° Special features Grade: LX10 (Tungaloy) Hole: with hole Hole style: cylindrical hole Plate form: rhombic Chipbreaker: none Suitable for external and internal turning Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What applications is this insert intended for? This DNGA150616 LX10 indexable insert is designed primarily for external and internal turning operations and integrates with ISO‑standard holders for general turning tasks. What are the main benefits of the LX10 grade? The LX10 carbide grade from Tungaloy provides a balance of wear resistance and toughness, improving edge stability and extending useful tool life in a variety of turning applications. Does the insert include a chipbreaker? This particular insert is supplied without a chipbreaker; chip formation and control should be managed via cutting data selection or by choosing a corresponding insert geometry with an integrated chipbreaker if required. Which dimensions should be checked for holder compatibility? Check plate size (15 mm), thickness (6.35 mm), corner radius (1.6 mm), clearance angle (0°) and the through‑hole style (cylindrical) to ensure correct clamping and seat fitment in the chosen holder. How to order the exact item and verify availability? Refer to the SKU 6852042-Tungaloy when enquiring; Metav Werkzeuge can confirm stock and advise on the correct holder pairing and spare clamping parts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150616 LX11 Wendeplatten - Tungaloy
Reliable, repeatable turning performance is achieved through the combination of the LX11 carbide grade and the stable 55° rhombic geometry, delivering extended edge life and consistent surface quality. Order the DNGA150616 LX11 directly via Metav Werkzeuge or ask the consultants for further technical clarification. DNGA 150616 LX11 Tungaloy turning insert — 55° rhombic, carbide DNGA150616 LX11 is an ISO-standard rhombic indexable insert designed for precision external and internal turning where edge stability and predictable wear are required ISO rhombic insert DNGA 150616 Tungaloy LX11 carbide grade 55° geometry for stable cutting 1.6 mm corner radius, 6.35 mm thickness Consistent edge life through a balanced grade The insert uses the LX11 Tungaloy cutting grade, a purpose-engineered carbide composition that balances wear resistance and toughness to maintain a stable cutting edge under typical turning conditions. This balance reduces unexpected tool changes and contributes to a predictable process, which supports higher uptime on the machine. Compatibility with ISO holders is determined by form, relief angle, tolerance class, fastening and thickness, ensuring the insert integrates into standard tool systems without complex adaptation. The grade’s properties complement the insert geometry to resist edge chipping while preserving cutting performance over repeated indexings. Geometry tuned for repeatable surface finish A 55° rhombic geometry combined with a 1.6 mm corner radius provides an effective compromise between strength and finish. The steeper angle improves insert support in the pocket and reduces vibration tendency, which enhances dimensional stability during both roughing and finishing passes. The 6.35 mm plate thickness contributes to rigidity, and the cylindrical hole secures repeatable clamping. For applications where a less aggressive approach is required, the moderate corner radius helps maintain a consistent surface texture without sacrificing edge robustness. Application flexibility and process benefits Designed for turning tasks, the insert is delivered without an integrated chipbreaker so that the choice of chip control can be matched to the workpiece material and cutting conditions. The LX11 composition augments the geometry to provide the necessary mix of durability and edge integrity for a broad set of turning operations. When paired with the correct holder and cutting parameters, the system promotes lower process variability, reduced rework and predictable component quality — all key factors for cost-effective production in batch and single-piece manufacturing. System integration and handling advantages The ISO-series construction simplifies logistics: the system consists of the indexable insert, a compatible external holder or boring bar, a shim/clamp set and replacement screws. This standardised approach reduces tool inventory complexity and streamlines changeover on toolholders engineered for DNGA-style plates. The insert’s ISO designation and hole style allow secure fastening and straightforward replacement during service routines, which shortens downtime and helps maintain production flow. Clear identification via the manufacturer SKU and article number supports traceability for quality management and reordering. Contact Metav Werkzeuge today to secure genuine Tungaloy DNGA150616 LX11 turning inserts for reliable machining results — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: 6803180 Manufacturer article number: 6803180 SKU: 6803180-Tungaloy Manufacturer SKU: TUN6803180 Series: ISO-Drehwendeschneidplatten Material: Hartmetall Core technical data Corner radius: 1.6 mm Thickness: 6.35 mm Insert size: 15 mm Angle: 55° Relief angle: 0° ISO code: 150616 Design and special features Shape: rhombic Hole style: cylindrical hole Chipbreaker: none Grade: LX11 Application: Turning FAQ What materials is this insert designed for? The DNGA150616 LX11 insert is formulated with a carbide grade that provides a balance of wear resistance and toughness; select the matching chip control and cutting data according to the workpiece material. How does the 55° geometry affect machining? The 55° rhombic geometry increases insert support and stability in the pocket, improving dimensional repeatability and helping to maintain a consistent surface finish during turning. Is this insert compatible with standard ISO holders? Compatibility is achieved via form, relief angle, tolerance class, fastening, size and thickness; the DNGA150616 follows ISO conventions so it integrates with appropriately specified holders and boring bars. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker; chip control should be matched using the chosen holder, cutting data or a different insert variant where required. How is insert life extended in production? The LX11 grade enhances edge stability and wear resistance, reducing the frequency of indexing and replacements, which supports longer uninterrupted production cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150620 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, LX10 Tungaloy grade and a robust 2 mm corner radius for consistent turning performance; order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. DNGA 150620 LX10 — ISO rhombic indexable turning insert by Tungaloy The DNGA150620 LX10 is a rhombic, ISO‑standard indexable turning insert designed for both external and internal turning operations in general turning applications. ISO rhombic geometry 55° LX10 Tungaloy grade, wear‑resistant 2 mm corner radius for edge strength Cylindrical hole, 6.35 mm plate thickness Precise performance for demanding turning tasks The DNGA150620 LX10 is an ISO indexable turning insert manufactured from carbide and specified for turning operations. Its rhombic geometry with a 55° lead angle provides a reliable cutting position for both facing and light to medium turning, while the 0° relief angle supports stable engagement with the workpiece. The combination of LX10 grade and the cemented carbide substrate is selected to balance wear resistance and toughness, which translates into longer edge life and fewer index changes. Compatibility with ISO holders is determined by form, relief angle, tolerance class, clamping and plate size, making this insert suitable for standard toolholder systems across production and workshop environments. Geometry and dimensions that aid process stability Key dimensional features such as the 2 mm corner radius, 15 mm plate size and 6.35 mm thickness contribute directly to cutting reliability. A larger corner radius increases edge strength and reduces the risk of premature chipping when encountering interrupted cuts or harder material zones, while the plate thickness helps minimise vibration on less rigid setups. The insert is supplied with a cylindrical hole for positive clamping and straightforward orientation in holders. These details reduce setup time and support a predictable tool life per index, which improves overall machining throughput and lowers tooling change frequency. Material adaptability and operational benefits The LX10 cutting grade from Tungaloy complements the insert geometry to offer broad material coverage and stable chip formation in typical turning tasks. This makes the insert a cost‑effective choice where a balance of edge stability and abrasion resistance is required. For practical selection, match the chipbreaker and grade to the workpiece material, cutting parameters and machine rigidity—note that this specific variant is supplied without a dedicated chipbreaker. For precision and repeatability in series production, the combination of ISO standard form, grade characteristics and correct holder matching ensures consistent surface finish and process reliability. Contact Metav Werkzeuge today to discuss DNGA150620 LX10 suitability for the intended material and machining parameters or for a customised recommendation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852043 Manufacturer SKU: TUN6852043 Product label: DNGA150620 LX10 Tungaloy‑Wendeplatte Model series: ISO indexable turning inserts Material: Carbide Core specifications Plate size: 15 mm Plate thickness: 6.35 mm Relief angle: 0° Lead/approach angle: 55° Corner radius: 2 mm Design & special features Rhombic plate shape (DNGA) Cylindrical hole for clamping Grade: LX10 (Tungaloy) Intended application: external and internal turning Supplied without chipbreaker FAQ What machine operations is this insert suited to? The DNGA150620 LX10 turning insert is designed for external and internal turning operations and performs well in light to medium turning tasks. Which holder characteristics must be matched for correct fitment? Compatibility requires matching holder form, relief angle, tolerance class, clamping method, plate size and thickness to the DNGA150620 LX10 insert. What does the LX10 grade mean for cutting performance? The LX10 Tungaloy grade provides a balance of wear resistance and toughness, yielding good edge stability and consistent wear behaviour in general turning applications. Is the insert supplied with a chipbreaker? This variant is supplied without a chipbreaker; chip control must be achieved through grade selection, cutting conditions or holder geometry. How does the 2 mm corner radius affect machining? A 2 mm corner radius increases edge strength and reduces chipping risk, improving stability when encountering variable material conditions or interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGA 150620 LX11 Wendeplatten - Tungaloy
Combine the ISO DNGA150620 geometry with the LX11 Tungaloy grade and a robust carbide substrate for high wear resistance and edge stability; order directly via Metav Werkzeuge or contact our consultants for application advice. DNGA150620 LX11 indexable turning insert by Tungaloy — rhombic 55° with 2 mm radius A DNGA150620 LX11 indexable insert designed for external and internal turning, offering ISO compatibility and a sturdy carbide substrate for reliable production machining. ISO DNGA150620 rhombic 55° geometry Tungaloy LX11 grade, wear-resistant carbide 2 mm corner radius for stable cutting Cylindrical hole, 6.35 mm thickness Consistent cutting performance for external and internal turning The DNGA form follows ISO norms to ensure predictable behaviour in standard toolholders; the rhombic 55° geometry gives a balanced approach between cutting strength and accessibility in confined bores. With a 2 mm corner radius and 6.35 mm thickness, the insert provides a larger cutting edge reserve that reduces edge chipping and extends tool life in interrupted cuts. The 0° clearance characteristic makes the geometry particularly suitable for general-purpose turning and for operations where axial engagement and radial reach must be balanced. Compatibility depends on holder form, clearance angle, tolerance class, fastening and size — the standardised designation simplifies selection and reduces setup time. Grade and substrate engineered for wear resistance and edge stability The LX11 cutting grade from Tungaloy combines a wear-resistant carbide substrate with a microstructure optimised for toughness. This pairing increases resistance to flank wear while maintaining cutting-edge stability under moderate to heavy feeds. Because this insert is supplied without a chipbreaker, the grade selection and insert geometry work together to control chip form through cutting parameters and holder design; this approach supports consistent surface finishes and predictable tool life, especially in production environments where reproducibility matters. The insert’s construction is aimed at delivering a balance between abrasion resistance and impact tolerance to suit a wide range of turning tasks. Quick interchange and process reliability for production workflows The rhombic shape with a cylindrical hole ensures secure clamping and straightforward indexing during tool changes, helping to minimise machine downtime. The ISO DNGA150620 designation supports interchangeability across compatible toolholder systems when form, thickness and fastening match, enabling rapid replenishment on the shop floor. Standard dimensions and the robust carbide substrate contribute to steady cutting forces and repeatable results, which in turn reduce rework and stabilise cycle times. Where consistent dimensional accuracy and surface integrity are required, this indexable insert supports predictable machining outcomes. For reliable production turning with Tungaloy LX11 wear resistance and ISO interchangeability, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 6803181-Tungaloy Manufacturer SKU: TUN6803181 Manufacturer article number: 6803181 Model series: ISO turning indexable inserts Grade: LX11 Material: carbide Dimensions & Angles Thickness: 6.35 mm Size: 15 mm Corner radius: 2 mm Diamond angle: 55° Clearance angle: 0° Design & Features Rhombic insert shape Cylindrical hole ISO designation: DNGA150620 Supplied without chipbreaker Suitable for external and internal turning Compatibility: depends on holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The DNGA150620 LX11 insert from Tungaloy is designed for general turning applications; its LX11 grade and carbide substrate suit a broad range of materials depending on cutting data and holder rigidity. Is the DNGA150620 compatible with standard ISO holders? Yes, the DNGA150620 designation follows ISO norms and fits holders that match the form, thickness (6.35 mm), fastening and tolerance class of the insert. Why is there no chipbreaker on this insert? This DNGA150620 LX11 insert is supplied without a chipbreaker so that chip control can be achieved via grade selection, holder geometry and cutting parameters tailored to the application. What is the corner radius and how does it affect performance? The insert has a 2 mm corner radius, which increases edge strength and improves resistance to chipping, offering a good compromise between finish and tool life. How does the LX11 grade influence tool life? The LX11 grade provides a wear-resistant carbide composition with sufficient toughness for steady edge stability, helping to extend tool life under normal turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 110402 NS9530 Wendeplatten - Tungaloy
High-precision finishing with low cutting forces and consistent surface quality: the combination of an uncoated cermet NS9530 grade and a sharp cutting edge ensures efficient, repeatable results in continuous turning operations. Benefit from ISO compatibility, rhombic 55° geometry and a 0.2 mm corner radius for fine turning. Order the DNGG110402-01 directly via Metav Werkzeuge or ask our consultants if needed. DNGG 110402 NS9530 – Indexable turning insert for finishing (55°, 0.2 mm) by Tungaloy The DNGG110402-01 NS9530 is an ISO‑standard indexable insert for turning, optimised for finishing steel with continuous cuts and small depths of cut Rhombic insert, 55° cutting geometry Sharp cutting edge for high surface finish 0.2 mm corner radius for fine turning ISO‑standard insert, cylindrical hole mounting Precise finishing performance with uncoated cermet technology The insert combines an uncoated cermet substrate with the NS9530 grading to deliver notably low cutting forces and superior edge stability during finishing passes. This composition promotes a consistent machining process, particularly in continuous cuts where chatter and edge deterioration are critical concerns. The result is a reliable path to improved productivity through fewer interruptions for tool change and less rework thanks to the sharp cutting edge and excellent surface finish. Geometry engineered for fine turning and dimensional control A rhombic plate with a nominal 55° cutting geometry and a 0.2 mm corner radius reduces radial engagement while enabling fine feature generation. The 0° clearance angle and the insert’s compact 11 mm size make it especially suitable for small depths of cut and close-tolerance external or internal turning. The integrated chipbreaker type 01 is matched to finishing conditions, promoting controllable chip formation and reducing the risk of built-up edge for cleaner part surfaces. System compatibility and practical workshop integration Designed to the ISO turning insert system, the plate is compatible with matching external holders, shims/locking sets and replacement screws; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The plate includes a cylindrical hole for secure mounting and a plate thickness of 4.76 mm, enabling straightforward retrofit into standard toolholders. For application guidance or selection of the most suitable grade and chipbreaker for a given steel type and machining strategy, Metav Werkzeuge provides technical advice to support process optimisation. Contact Metav Werkzeuge for application advice and to secure Tungaloy DNGG110402-01 NS9530 inserts with fast availability Technical data Article number: 6997793 SKU: 6997793-Tungaloy Manufacturer SKU: TUN6997793 Brand: Tungaloy Model series: ISO turning indexable inserts ISO designation: DNGG110402-01 Core dimensions Plate size: 11 Plate thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 55° Clearance angle: 0° Features & applications Shape: rhombic Hole: with hole — cylindrical hole Grade/coating: NS9530 (uncoated cermet) Material: cemented carbide Chipbreaker: 01 Application: turning — finishing for steel, continuous cuts, small depths of cut System setup: ISO insert, external holder, shim/locking set, replacement screws FAQ What materials is this insert suited for? The DNGG110402-01 NS9530 insert is optimised as a finishing grade for steel and is recommended for continuous cuts and small depths of cut. How does the NS9530 grade affect machining? NS9530 is an uncoated cermet grade offering low cutting forces and good edge retention, which supports improved surface finish and stable performance in finishing operations. Which toolholders are compatible with this insert? Compatibility follows ISO standards; the insert fits holders that match its form, clearance angle, tolerance class, fastening method, size (11) and thickness (4.76 mm). What is the advantage of the 55° rhombic geometry? The 55° rhombic geometry reduces radial engagement while providing a controlled cutting action, aiding fine turning and dimensional control on finished parts. What mounting features does the plate have? The plate includes a cylindrical hole for secure fixation and an indexable format that integrates into standard ISO turning systems; supplier SKU: 6997793-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 110404 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of precise cermet NS520 cutting performance, robust rhombic geometry and secure cylindrical mounting for consistent finishing operations; order the insert directly via Metav Werkzeuge or consult our advisors for process matching. DNGG 110404 NS520 turning insert – Tungaloy DNGG110404-01 delivers ISO‑standard indexable performance for external and internal turning, prioritising surface finish and dimensional stability. Cermet grade NS520 for fine finishing Rhombic 55° geometry for versatile turning 0.4 mm corner radius improves surface finish Cylindrical hole for secure mounting Superior surface quality and repeatable accuracy The combination of the NS520 grade and a cermet/coated cermet substrate is optimised for finishing and light machining of steel, delivering a consistent wear pattern and an improved surface texture compared with conventional carbide grades. The fine microstructure of the cutting material supports tight dimensional control and reduced burr formation, which in turn lowers post‑process rework. Where part tolerances and surface integrity matter, this grade enables stable process windows and predictable insert life. Geometry engineered for productivity and stability The rhombic plate form with a 55° approach angle and a 0° relief angle provides a balance between cutting edge strength and accessibility into profiles and shoulders. The 0.4 mm corner radius supports a superior surface finish without compromising edge life, while the 11 mm size and 4.76 mm thickness contribute to rigidity in both external holders and boring bars. These geometric choices reduce chatter risk and enable higher feed rates during finishing passes, improving throughput without sacrificing part quality. System compatibility and secure clamping for reliable machining Designed as an ISO indexable insert, compatibility with external holders is governed by shape, relief angle, tolerance class, clamping and thickness; the insert is supplied with a cylindrical hole for positive seating and repeatable indexing. Typical system setup comprises the ISO insert, a matched external holder or boring bar, a shim/clamp set and replacement screws—this modular approach simplifies inventory and changeover. The DNGG110404‑01 format ensures straightforward integration into existing turning systems, reducing setup time and improving process reliability. For precision finishing with the NS520 cermet grade, contact Metav Werkzeuge for tailored recommendations and process support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803184 SKU: 6803184-Tungaloy Manufacturer SKU: TUN6803184 Model series: ISO‑Drehwendeschneidplatten Brand: Tungaloy Facts Corner radius: 0.4 mm Approach angle: 55° Relief angle: 0° Thickness: 4.76 mm Size: 11 Special features Material: cemented carbide Grade/coating: NS520 (cermet / coated cermet) Plate form: rhombic Hole: cylindrical hole Chipbreaker: 01 Intended application: turning Typical system build: ISO insert, matching holder/boring bar, shim/clamp set, spare screws FAQ What applications is this insert best suited for? The DNGG110404‑01 NS520 Tungaloy indexable insert is tailored for finishing and light machining of steel in external and internal turning operations. How does the NS520 grade affect surface finish? The NS520 cermet composition promotes a fine, uniform wear pattern and improved surface finish, helping to meet tight dimensional tolerances during finishing cycles. Which holders are compatible with this insert? Compatibility is determined by the rhombic shape, 55° approach, 0° relief, thickness and clamping arrangement; use holders specified for DNGG110404‑01 formats. Is the insert suitable for heavy roughing passes? The DNGG110404‑01 is optimised for finishing to light machining; for heavy roughing, a more robust grade or different geometry is recommended. What is the correct way to secure the insert? Use the matching clamp/shim set and the designated screw size with the cylindrical hole to ensure repeatable seating and secure clamping of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 110404 NS9530 Wendeplatten - Tungaloy
Take advantage of a high-performance finishing insert that combines an uncoated cermet grade for superior surface quality with a fine 0.4 mm corner radius for precise edge control; order or request technical advice via Metav Werkzeuge for seamless integration into existing turning cells. DNGG110404-01 NS9530 — ISO turning insert DNGG 110404 for turning, rhombic 55°, Tungaloy DNGG110404-01 NS9530 is an ISO-standard rhombic turning insert engineered for external and internal turning where fine finishing of steel is required. ISO rhombic insert, 55° cutting geometry Uncoated cermet grade NS9530 for fine finishing 0.4 mm corner radius for precise edge control Compatible with standard ISO turning holders Superior finishing with cermet chemistry The rhombic insert is manufactured in an uncoated cermet grade NS9530, designed specifically as a finishing grade for steel. The composition delivers a sharp cutting edge and reduced cutting forces, which translates into improved surface integrity and lower tool-induced heat. With a fine 0.4 mm corner radius, the geometry supports small depths of cut and continuous feeds, producing consistent, mirror-like surfaces while maintaining dimensional accuracy. Easy integration with standard holders and short setup times Built to ISO geometry 110404, the insert’s rhombic form and a 0° clearance angle ensure compatibility with a wide range of ISO-standard turning holders. The plate thickness of 4.76 mm and the nominal size 11 mm, together with the cylindrical hole, make mechanical clamping straightforward and repeatable. As a result, set-up and changeover times are minimised, enabling faster changeovers and steady production throughput without complex modifications to existing toolstations. Reliable process performance for finishing operations Equipped with chipbreaker 01 and optimised for continuous cutting, this insert is suitable for both external and internal finishing where low cutting forces and high surface quality are priorities. The uncoated cermet substrate helps maintain a sharp edge for extended intervals in finishing cycles, offering stable cutting behaviour and predictable wear patterns. This combination supports higher first-pass quality and reduces the need for secondary polishing, contributing to improved overall productivity. For precise finishing tasks choose the Tungaloy NS9530 inserts for dependable surface quality and predictable tool life — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997794 Manufacturer SKU: TUN6997794 SKU: 6997794-Tungaloy Facts ISO code: 110404 Cutting angle: 55° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 11 mm Clearance angle: 0° Special features Grade: NS9530 (uncoated cermet) Application: turning — external and internal finishing of steel Chipbreaker: 01 Hole style: cylindrical hole Geometry: rhombic Compatibility: ISO-standard insert; compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The insert in grade NS9530 is optimised for finishing steel and provides a sharp edge and low cutting forces suited to continuous cuts. Is this an ISO-standard insert and which geometry does it use? Yes, the insert follows ISO 110404 geometry with a rhombic form and a 55° cutting angle for standard holder compatibility. What is the corner radius and how does it affect the finish? The 0.4 mm corner radius promotes precise edge control and is effective for small depths of cut, helping to achieve high surface quality with minimal burnishing. Does the insert require a coated grade for longer life? This is an uncoated cermet finishing grade (NS9530), optimised for surface quality; coating decisions depend on workpiece material and machining strategy rather than a universal requirement. How is the insert secured in the holder? The insert features a cylindrical hole and conforms to ISO dimensions; secure clamping is achieved via standard clamping sets and screws compatible with the insert’s form and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 110408 GT720 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, proven GT720 cermet quality and reliable ISO compatibility for uninterrupted turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. DNGG 110408 GT720 — ISO Turning Insert for Turning by Tungaloy A DNGG110408-01 GT720 indexable insert engineered for finishing to light machining of steel, offering high surface quality and consistent dimensional accuracy in ISO-compatible turning systems Cermet grade GT720 for superior surface finish Rhombic geometry with 55° cutting angle Corner radius 0.8 mm for fine detail and tolerance control Cylindrical-hole design for secure clamping Consistent finishing performance for precision turning The GT720 grade is a cermet engineered for finishing to light machining of steel; it prioritises surface finish and dimensional accuracy while maintaining even wear across the cutting edge. In production environments where repeatability matters, a coated cermet substrate delivers lower built-up edge tendencies and stable cutting behaviour over long runs. The insert meets ISO plate standards, which means seating, size and thickness tolerances are predictable and compatible with standard external holders and boring bars, reducing setup time and the risk of misfit during tool changes. Geometry tuned for fine surfaces and secure clamping A rhombic plate with a 55° main cutting angle and 0° rake is optimised for close-tolerance external and internal turning where small depths of cut and clean edges are required. The 0.8 mm corner radius supports fine surface texture without sacrificing edge strength; smaller radii reduce cutting forces and help achieve target tolerances in finishing passes. The insert is supplied with a cylindrical hole, enabling secure fastening in a wide range of ISO-geometry holders and ensuring consistent seating and repeatable orientation. The listed spanbreaker style (01) enhances chip control in light cutting regimes, improving process stability. System-level benefits and recommended applications Used as part of a system—insert, compatible external holder or boring bar, support shim and appropriate clamping screw—this indexable plate contributes to predictable tool life and straightforward maintenance. The carbide substrate combined with the GT720 cermet coating supports stable wear for serial finishing of steel components, yielding fewer reworks and higher first-pass acceptance. Typical applications include precision external turning, internal profiling and fine-diameter operations where a combination of surface integrity and dimensional conformity is required. For selection between different grades or chipbreakers, consider workpiece material, machine rigidity and desired feed/speed strategy to match the insert to the process. Contact Metav Werkzeuge for tailored advice on holder compatibility, batch availability and process integration for the DNGG110408-01 GT720 insert Technical details Article number: 6849213 Manufacturer SKU: TUN6849213 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Key dimensions and numbers Size: 11 Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Rake angle: 0° ISO code: 110408 Materials and features Material: carbide Grade/coating: GT720 (cermet / coated cermet) Hole: with hole, cylindrical hole Plate shape: rhombic Application: turning; finishing to light machining of steel FAQ What materials is this insert suitable for? The DNGG110408-01 GT720 insert is specified for finishing to light machining of steel, with the GT720 cermet grade prioritising surface quality and consistent wear for such materials. How does the rhombic 55° geometry affect cutting performance? A 55° rhombic geometry provides a balanced approach between edge strength and access for fine turning tasks; it is well suited to external and internal finishing where a small contact area and accurate geometry control are required. Does the insert fit standard ISO holders? Yes, the insert follows ISO plate dimensions and is compatible with holders that match its form, clearance angle, tolerance class, fastening method, size and thickness; the cylindrical hole design supports secure clamping. What advantages does the GT720 cermet offer over conventional carbide? GT720 cermet is optimised for improved surface finish and dimensional control in finishing operations; it tends to produce even wear and reduced built-up edge compared with some uncoated carbide grades in light cutting scenarios. Which system components are required for reliable assembly? A complete system typically includes the indexable insert, a compatible external holder or boring bar, a support shim or clamp set and replacement fastening screws to ensure repeatable seating and safe operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 110408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, the NS9530 uncoated cermet grade and a compact rhombic format to achieve consistently high surface quality in finishing operations; order the DNGG110408-01 NS9530 turning insert directly via Metav Werkzeuge or ask our consultants if needed DNGG110408-01 NS9530 — DNGG 110408 turning insert, Tungaloy DNGG110408-01 NS9530 is an ISO rhombic insert designed for precision external and internal turning, optimised for fine finishing of steel components Uncoated cermet for fine finishing Sharp cutting edge for low cutting forces Rhombic 11 mm insert with cylindrical hole Optimised for continuous cuts and small depths Achieve finer finishes with a dedicated finishing grade The combination of an uncoated cermet matrix and the NS9530 specification delivers markedly improved surface texture on steel during low- to medium-feed finishing passes. With a deliberately sharp cutting edge, the insert minimises cutting forces and heat generation; this reduces workpiece distortion and helps to maintain tolerances on slender or thin-walled parts. Where continuous cuts and small depths of cut are common, the result is a higher first-pass yield and fewer subsequent grinding or polishing operations, saving time in downstream processes. Geometry and clamping that support stable machining The insert’s rhombic geometry and an 11 mm size provide a compact contact area for controlled chip flow, while the 0° clearance angle contributes to a neutral cutting action suited to finishing. The design includes a cylindrical hole for positive seating, so holder compatibility is determined by form, clearance angle, tolerance class, fixation, size and thickness. With a plate thickness of 4.76 mm and a corner radius of 0.8 mm, the geometry balances edge strength with the need for a fine edge to achieve superior surface quality. Practical guidance to increase process reliability and output Select the appropriate chipbreaker and the NS9530 grade according to workpiece material, cutting strategy and machine rigidity: the listed chipbreaker (01) is geared towards finishing and stable chip formation in continuous cutting. Low cutting forces equate to reduced tool wear and longer periods between index changes, improving uptime. The typical system setup comprises an ISO turning insert, a matching external holder or boring bar, a shim/clamping set and replacement screws, enabling quick and reproducible insert changes for efficient shop-floor routines. For tailored advice on integrating Tungaloy NS9530 inserts into production workflows, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will recommend the optimal chipbreaker and holder combination for the application Technical Data Article number: 6997795 Manufacturer SKU: TUN6997795 SKU: 6997795-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 110408 Item name: DNGG110408-01 NS9530 Tungaloy-Wendeplatte Facts Size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief/clearance angle: 0° Insert angle: 55° Special features Uncoated cermet cutting material (NS9530) Substrate: cemented carbide Rhombic insert form With cylindrical hole Chipbreaker: 01 (finishing) Application: turning (external and internal) Suitable for continuous cuts and small depths of cut FAQ What materials is this insert optimised for? The NS9530 uncoated cermet grade is optimised for finishing operations in steel; the DNGG110408-01 NS9530 insert provides a sharp edge and low cutting forces specifically to improve surface quality on steel components. How does the insert’s geometry affect performance? The rhombic shape with an 11 mm size and 0° clearance angle offers a balance of edge precision and stability; this geometry supports fine finishing while the cylindrical hole ensures reliable seating in compatible holders. Which chipbreaker should be used for finishing passes? The item is supplied with chipbreaker 01, which is intended for finishing and continuous cutting conditions; choosing the matching breaker and grade helps to control chip formation and achieve consistent surface finish. Can the insert be used for internal boring as well as external turning? Yes—this ISO-format insert is suitable for both external and internal turning when paired with an appropriate external holder or boring bar and the correct clamp or shim set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150402 GH110 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, stable cutting-edge integrity and ISO compatibility for reliable turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for selection advice. DNGG150402-01 GH110 ISO turning insert — 55° rhombic, Tungaloy The DNGG150402-01 GH110 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a balanced combination of wear resistance and edge stability for general turning applications. ISO 55° rhombic geometry Tungsten carbide substrate Chipbreaker 01 for controlled chips Cylindrical hole for secure clamping Consistent edge life through optimized grade and chip control The GH110 grade from Tungaloy combines wear resistance with sufficient toughness, offering a predictable tool life under varied turning conditions. The insert’s chipbreaker 01 is engineered to produce short, controllable chips on many turning operations; this reduces process interruptions and improves surface finish. Specifying the correct chipbreaker and grade according to workpiece material and machining stability enables a measurable improvement in productivity, while the ISO conformity supports straightforward tool replacement and inventory management. Geometry and dimensions that support versatile turning tasks A 55° rhombic geometry with a 0.2 mm corner radius and a 15 mm inscribed circle gives access to shoulders and allows close‑in finishing. The insert thickness of 4.76 mm and the cylindrical hole ensure reliable clamping in compatible holders, while the declared 0° clearance angle is a key datum when matching toolholder geometry. These dimensional specifications translate directly into repeatable cutting positions and consistent part tolerances when used with appropriately rated external holders or boring bars. Productivity gains through material and system compatibility Manufactured from tungsten carbide and specified for turning, the insert integrates into a system comprising an ISO‑compatible insert seat, clamping set and replacement screws. Because compatibility is determined by form, clearance, tolerance class, fastening and thickness, selection of the correct holder and clamping hardware is essential; this approach minimises setup time and supports steady production rates. The combination of grade, geometry and chip control addresses the rational needs of production planners seeking reduced downtime and stable cycle times. Simple replacement and inventory alignment for shop floor efficiency The insert is designed for quick indexing and replacement within ISO‑standard toolholders, simplifying tool management on the shop floor. Marked with the manufacturer item number and SKU, it can be tracked in procurement systems to streamline replenishment. Using standardised inserts with defined dimensions and grade properties reduces complexity in tool assortments and supports repeatable machining outcomes, which in turn helps achieve consistent component quality. Contact Metav Werkzeuge for tailored advice on insert selection and holder compatibility — our team can recommend the right GH110 solution for specific turning tasks and process requirements, reachable via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6803193 SKU: TUN6803193 Model series: ISO-Drehwendeschneidplatten Designation: DNGG150402-01 GH110 Tungaloy-Wendeplatte Material: tungsten carbide Manufacturer: Tungaloy Facts Inscribed circle: 15 mm Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 55° Clearance angle: 0° Hole: cylindrical Special features Rhombic insert geometry GH110 Tungaloy grade Chipbreaker 01 ISO‑standard turning insert Intended application: turning Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What applications is this insert suited for? This insert is intended for turning operations; the DNGG150402-01 GH110 insert from Tungaloy is suitable for both external and internal turning when matched with the appropriate chipbreaker and holder. How does the GH110 grade affect tool life? The GH110 grade balances wear resistance and toughness, which extends edge life under varied cutting conditions and provides dependable performance in many turning scenarios. Which holder features are required for correct fitment? Correct fitment depends on matching the insert form, clearance, tolerance class, fastening method, size and thickness to the chosen external holder or boring bar; the cylindrical hole supports secure clamping. Can this insert be used for finishing and roughing? Yes; by selecting the appropriate chipbreaker and machining parameters, the insert can be applied to both finishing and light to medium roughing tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150402 GH110 Wendeplatten - Tungaloy
Reliable turning performance is delivered by the combination of GH110 wear resistance, a rhombic 55° geometry and a 0.2 mm corner radius for stable edges and predictable surface finish; compatible holders and correct chipbreaker selection ensure consistent chip control. Order the DNGG 150402 GH110 turning insert directly via Metav Werkzeuge or consult the specialists for holder compatibility. DNGG 150402 GH110 Turning Insert by Tungaloy — rhombic 55° with cylindrical hole DNGG 150402 GH110 is an ISO-standard indexable insert for external and internal turning, designed to balance wear resistance and edge stability in a wide range of applications. ISO 150402 rhombic 55° geometry GH110 grade for wear resistance and toughness Cylindrical hole for secure clamping Consistent process reliability through optimised grade and geometry The DNGG150402-01 insert combines the GH110 Tungaloy grade with a rhombic 55° form to deliver reliable chip control and a long tool life under varied cutting conditions. The GH110 composition complements the insert geometry by offering a balance of wear resistance and edge toughness, which reduces flank wear and sudden chipping. In practical terms, this means fewer insert changes and a steadier production flow when matched with an appropriate external holder and clamping system. Practical compatibility and system integration for straightforward setup Compatibility with the cutting toolholder is determined by the insert’s shape, clearance angle, tolerance class, fastening method, size and thickness. This indexable insert is supplied in the ISO series for turning and features a cylindrical hole and standard clamping provisions, enabling secure mounting in common clamping systems. The 4.76 mm plate thickness and the standard ISO dimensions support straightforward integration into existing tool assemblies, while the rhombic form offers versatile cutting-edge orientations for both external and internal operations. Performance benefits from edge radius and chipbreaker selection The 0.2 mm corner radius provides a robust cutting edge that improves surface finish while resisting edge breakdown in interrupted or semi-finish turning. Chip control depends on the selected breaker; the insert’s chipbreaker index 01 is compatible with a range of workpiece materials when combined with the GH110 grade. For best results, match the chipbreaker and grade to the workpiece and machining stability: this approach reduces vibration, improves surface consistency and increases material removal rates without sacrificing insert life. Material range and application guidance for reliable results Manufactured from carbide and intended specifically for turning, the insert is suitable for a broad spectrum of steels and alloyed materials when the GH110 grade is selected for its balanced properties. The ISO-series design and the specified geometry make the insert particularly effective in general turning tasks where repeatability and predictable tool wear are priorities. For machining strategies involving high speeds or demanding alloys, the combination of cutter geometry and GH110 should be evaluated together with the selected holder and cutting parameters to ensure optimal outcomes. For technical consultation or to request a compatibility check and procurement via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6803191 SKU: 6803191-Tungaloy Manufacturer SKU: TUN6803191 Manufacturer article number: 6803191 Model series: ISO indexable turning inserts Core data ISO designation: 150402 Plate size: 15 mm Plate thickness: 4.76 mm Included angle: 55° Corner radius: 0.2 mm Special features Material: carbide Grade/coating: GH110 (Tungaloy) Shape: rhombic Hole: cylindrical hole Chipbreaker: 01 Application: turning (external and internal) Compatibility determined by shape, clearance angle, tolerance class, fastening, size and thickness FAQ What is the intended application for this insert? The DNGG 150402 GH110 turning insert from Tungaloy is intended for external and internal turning operations where a balance of wear resistance and edge stability is required. Which materials can be machined with this grade? The GH110 Tungaloy grade is formulated for a broad workpiece range and is particularly effective on steels and alloyed materials when combined with the correct chipbreaker and cutting data. How does the 0.2 mm corner radius affect the finish? A 0.2 mm radius provides a more robust cutting edge that improves surface finish consistency and reduces the risk of edge chipping during interrupted cuts. What mounting considerations are important for the insert? Secure mounting relies on matching the insert’s rhombic shape, cylindrical hole and thickness to the holder’s seat, clamping system and tolerance class; correct match ensures stable cutting and predictable performance. Is the insert part of an ISO standard series? Yes, the insert conforms to the ISO designation 150402 and belongs to the ISO series of indexable turning inserts, facilitating compatibility with ISO-compliant holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150402 NS520 Wendeplatten - Tungaloy
Benefit from the consistent surface finish and extended tool life delivered by the NS520 cermet grade combined with the ISO‑standard DNGG geometry; the insert's 0.2 mm corner radius and secure cylindrical hole ensure stable clamping and reliable finishing performance—order the DNGG150402-01 NS520 Tungaloy insert via Metav Werkzeuge or consult the technical team for selection support. DNGG150402-01 NS520 Turning indexable insert (ISO 150402) for turning — Tungaloy The DNGG150402-01 NS520 is an ISO‑standard rhombic turning insert designed for finishing to light machining of steel, engineered to deliver even wear, high surface quality and repeatable dimensional accuracy. ISO DNGG geometry, 55° NS520 cermet for finishing steel Cylindrical hole for secure clamping 0.2 mm corner radius for fine finish High‑quality surface finish from a cermet grade The NS520 grade is a cermet formulation optimised for finishing and light cutting of steel, combining ceramic hardness with a metallic binder to reduce built‑up edge and support a stable cutting edge. This composition promotes uniform wear and helps achieve consistent surface finish and dimensional accuracy on external and internal turning tasks. The insert's emphasis on fine machining makes it suitable where lower cutting forces and high visual quality of the workpiece are required. Reliable system compatibility and secure clamping Designed to the ISO DNGG form, the insert fits standard rhombic holders when matched for form, free clearance, tolerance class, fixation method, size and thickness. The 55° geometry and rhombic shape support versatile turning angles, while the cylindrical hole enables positive location and stable clamping in suitable clamping systems. A plate thickness of 4.76 mm and the ISO designation facilitate quick verification against existing toolholders and replacement stocks, reducing setup time and the risk of mismatch. Practical machining advantages and selection guidance A 0.2 mm corner radius is effective for finishing passes where profile fidelity and surface texture are priorities; the modest radius lowers cutting forces and helps maintain form accuracy. The insert is supplied with chipbreaker 01, which should be selected according to workpiece material, cutting parameters and machine stability to ensure controlled chip formation. For finishing steel, pairing the NS520 grade with modest feeds and appropriate speeds produces the best balance of life and surface quality. When selecting the complete system, consider holder rigidity and clamping torque to preserve the insert's performance and repeatability. For precise finishing with Tungaloy's NS520 cermet grade, contact Metav Werkzeuge for tailored selection advice and current availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Manufacturer article number: 6803188 SKU: 6803188-Tungaloy Manufacturer SKU: TUN6803188 Model series: ISO turning indexable inserts Label: DNGG150402-01 NS520 Tungaloy‑indexable insert Material: cemented carbide Facts Size: 15 mm Thickness: 4.76 mm Included angle: 55° Corner radius: 0.2 mm Free clearance angle: 0° Chipbreaker: 01 Special features Grade: NS520 (cermet) Plate shape: rhombic Hole: with cylindrical hole Application: turning Typical use: finishing to light machining of steel Compatibility: ISO DNGG form, clamped in suitable holders FAQ Is this insert suitable for finishing steel? The DNGG150402-01 NS520 Tungaloy turning insert is designed specifically for finishing to light machining of steel, where the NS520 cermet grade provides improved surface finish and consistent wear (SKU 6803188-Tungaloy). Which holder features are required for compatibility? Compatibility is determined by ISO form, free clearance angle, tolerance class, fixation method, size and thickness; the DNGG geometry and cylindrical hole require a holder matching the DNGG150402‑01 form. What surface finish and accuracy can be expected? With the NS520 grade and a 0.2 mm corner radius, the insert delivers improved surface finish and repeatable dimensional accuracy in finishing passes on steel components. How should the chipbreaker be selected? The chipbreaker 01 fitted to this insert is suitable for finishing operations; selection should match workpiece material, feed rate and machine stability for optimal chip control and tool life. What clamping does the cylindrical hole provide? The cylindrical hole ensures positive location and secure clamping in compatible toolholders, supporting stable cutting conditions and consistent performance with the ISO‑standard insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150402 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 uncoated cermet grade and the precise rhombic geometry to achieve consistent finishing and reduced cutting forces; for procurement or technical advice, order via Metav Werkzeuge or consult their specialists. DNGG 150402 NS9530 Turning Insert – Rhombic R0.2, Uncoated Cermet (Tungaloy) The DNGG150402-01 NS9530 is an ISO‑standard rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and optimised chip control for continuous cuts. ISO‑standard rhombic geometry Uncoated cermet grade NS9530 0.2 mm corner radius for fine finishes 55° approach angle, 0° relief angle Superior finish with low cutting forces The combination of the NS9530 uncoated cermet and a sharp cutting geometry delivers a consistently high surface finish while reducing cutting forces. As a finishing grade, the substrate and edge preparation are tuned for continuous cuts and small depths of cut, which means less load on the machine spindle and more reliable dimensional results. This makes the insert particularly suitable where fine surface quality and repeatable part accuracy are priorities. Reliable integration into ISO tooling systems Compatibility is ensured by adherence to ISO standards: the insert’s rhombic geometry, thickness (4.76 mm), size (15 mm), relief angle (0°) and mounting hole determine the correct holder choice. Select a matching external holder or boring bar that accommodates the plate form, tolerance class and clamping method to achieve secure fixation and repeatable cutting position. The 55° approach angle supports controlled entry conditions and predictable chip flow when paired with an appropriate chipbreaker and stable clamping setup. Practical shopfloor advantages and handling A 0.2 mm corner radius balances edge strength with surface integrity, enabling fine finishing without compromising edge life under normal finishing parameters. The insert is supplied as part of a system concept: ISO insert, matching holder or boring bar, shim/clamping set and replacement screws. Choose the chipbreaker and grade according to workpiece stability and the machining strategy; for continuous finishing of steel, the uncoated cermet NS9530 offers low cutting resistance and excellent surface outcomes. For reliable finishing performance choose the Tungaloy NS9530 insert and contact Metav Werkzeuge for availability or personalised technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Manufacturer article number: 6997796 Manufacturer SKU: TUN6997796 SKU: 6997796-Tungaloy Brand: Tungaloy Model series: ISO‑turning inserts ISO designation: DNGG150402-01 Core specifications Inscribed circle / size: 15 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Approach angle: 55° Design & features Rhombic plate form Cylindrical hole Chipbreaker: 01 Grade: NS9530 (uncoated cermet) Material: cemented carbide Application: turning (external and internal) System components: ISO insert, suitable holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert designed for? The DNGG150402-01 NS9530 Tungaloy turning insert is engineered primarily for finishing steel, where the uncoated cermet grade achieves low cutting forces and high surface quality. How does the NS9530 grade affect machining? NS9530 provides a sharp cutting edge and is optimised for continuous cuts; the DNGG150402-01 NS9530 Tungaloy insert therefore delivers fine surface finishes with reduced cutting resistance. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; pair the DNGG150402-01 NS9530 Tungaloy insert with an ISO‑compatible external holder or boring bar matching these parameters. What is the significance of the 0.2 mm corner radius? A 0.2 mm corner radius on this Tungaloy insert balances edge strength and surface integrity, making it suitable for finishing passes where dimensional accuracy and surface quality are important. Is the insert suitable for internal machining? Yes, the ISO‑standard design of the DNGG150402-01 NS9530 Tungaloy turning insert allows use in both external and internal turning applications when matched with the correct boring bar and clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150402 TH10 Wendeplatten - Tungaloy
Combine consistent edge quality, TH10 grade performance and simple compatibility with ISO holders to ensure reliable turning operations. Order directly via Metav Werkzeuge or consult the technical team for selection advice. DNGG 150402 TH10 — ISO turning insert for turning, rhombic 55° by Tungaloy DNGG150402-01 TH10 is an indexable turning insert designed for external and internal turning, optimised for non‑ferrous materials and applications requiring low cutting forces and a clean surface finish. ISO standard rhombic insert, 55° included angle Uncoated cemented carbide, TH10 grade Cylindrical hole for secure clamping Corner radius 0.2 mm for fine finishing Reliable compatibility and precision for industrial turning The ISO designation of this indexable insert guarantees straightforward matching with standard holders when geometry and tolerance classes align. The insert’s rhombic 55° configuration provides a balanced mix of strength and accessibility for external and internal operations, while the cylindrical hole supports positive mechanical clamping. Compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness, and the ISO series is designed to simplify those selection decisions for production environments. Sharp, uncoated grade for low cutting force and superior finish The insert uses an uncoated cemented carbide substrate in TH10 grade, a sharp universal formulation aimed at non‑ferrous applications where reduced cutting forces and clean chips are priorities. This grade supports efficient material removal with lower cutting energy, which translates into better control of component temperature and an improved surface finish. For workshops prioritising throughput and consistent part quality, the TH10 performance profile offers a rational, cost‑efficient option. Geometry that aids handling and finishing With a corner radius 0.2 mm and a plate thickness 4.76 mm, the geometry has been chosen to balance edge strength with fine finishing capability. The modest corner radius enables narrow turning passes and improved edge life when machining softer alloys, while the solid carbide body delivers the rigidity needed for repeatable cuts. The 15 mm nominal size and rhombic form suit common holder types and allow access to tighter contours where larger inserts would be impractical. Application focus and operational benefits When configured as part of a standard ISO insert system, this tool supports both external and internal turning routines and is especially suitable where materials demand a clean chip and minimal tool force — for example, many aluminium alloys and other non‑ferrous workpieces. The TH10 grade’s uncoated edge reduces tendency for built‑up edge on sticky materials, helping to maintain dimensional accuracy and avoid surface blemishes. Where process reliability and reproducible results matter, the combination of geometry, grade and ISO compliance simplifies integration into existing production workflows. For precise non‑ferrous turning with Tungaloy's TH10 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and availability Technical Data Article number: 6803192 Manufacturer SKU: TUN6803192 Product: DNGG150402-01 TH10 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Application: Turning Core specifications Thickness: 4.76 mm Size: 15 mm Corner radius: 0.2 mm Clearance angle: 0° Insert angle: 55° Chipbreaker: 01 Design & features Rhombic shape Cylindrical hole Uncoated cemented carbide Grade TH10 Compatibility determined by form, clearance, tolerance, fixing, size, thickness FAQ What materials is this insert best suited for? The DNGG150402-01 TH10 insert is tailored for non‑ferrous materials and similar applications where low cutting forces and clean chip formation are required. How does the TH10 grade perform compared with coated options? TH10 is an uncoated cemented carbide grade offering a sharp edge that reduces cutting forces and the risk of built‑up edge; it is chosen where surface finish and low cutting energy are priorities over high temperature wear resistance. Which holders are compatible with this insert? Compatibility depends on the holder matching the insert’s rhombic form, clearance angle, tolerance class, fixing method, size and thickness; the ISO series is intended for standardised matching. What are the key geometric specifications to consider for setup? Important values are the corner radius 0.2 mm, thickness 4.76 mm, size 15 mm, 55° included angle and the presence of a cylindrical hole for securing the insert. What does the chipbreaker code 01 indicate for machining behaviour? Chipbreaker code 01 denotes the specific groove geometry for chip formation; combined with the TH10 grade, it supports clean chips in non‑ferrous turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150402 TH10 Wendeplatten - Tungaloy
Combine the ISO conformity, a 0.2 mm corner radius and the sharp TH10 uncoated carbide grade to achieve clean surfaces and low cutting forces in non‑ferrous turning; order the DNGG150402-01 TH10 insert directly via Metav Werkzeuge or ask our consultants for application advice. DNGG 150402 TH10 — DNGG150402-01 ISO turning insert for turning, 0.2 mm radius (Tungaloy) A DNGG150402-01 TH10 turning insert for ISO-compatible toolholders, designed for external and internal turning of non‑ferrous materials ISO-standard rhombic insert Uncoated carbide TH10 grade 0.2 mm corner radius for fine finishes Rhombic 55° geometry for versatile turning Delivering consistent finishes on non‑ferrous materials The insert is built from carbide and specified in the TH10 grade, an uncoated, sharp universal option that reduces cutting forces and promotes clean surface quality when machining non‑ferrous workpieces. This geometry and grade combination means lower power draw for lightweight alloys and improved surface integrity, which is especially relevant in serial production where consistent finish and reduced rework directly affect throughput and cost‑efficiency. As an ISO‑standard indexable plate, the item supports predictable tool life and repeatability on compatible toolholders. Secure seating and predictable repeatability in the toolroom The rhombic 55° plate form and the central cylindrical hole facilitate stable clamping and simple indexability, while the specified 0° relief angle and plate thickness (4.76 mm) contribute to rigidity in the cutting zone. Compatibility with a holder is determined by plate shape, relief angle, tolerance class, clamping method, size and thickness; matching these parameters ensures reliable seating, reduced vibration and repeatable component geometry. Where process stability is required, this insert geometry enables straightforward set‑up on ISO toolholders and boring bars. Economical machining through fewer tool changes A 0.2 mm corner radius provides a balance between edge strength and fine edge engagement, delivering improved surface finish without excessive cutting forces. The indexable design permits rotation to fresh cutting edges, extending effective tool life and cutting cost per part. Selecting a sharp, uncoated grade like TH10 for non‑ferrous materials avoids built‑up edge and supports stable chip formation, which together reduce frequency of tool change and increase productive cutting time on the shop floor. Practical notes for system assembly and application choice This ISO turning insert integrates into a typical system comprising an ISO‑compatible clamping plate or holder, a matching underlay/clamping kit and replacement screws. Choose the chipbreaker and grade to suit the workpiece material and the machine‑tool stiffness: the TH10 variant is optimised for non‑ferrous materials and light‑cut applications where low cutting forces and clean surfaces are priorities. For external turning and internal operations, verify holder compatibility with the plate dimensions (15 mm), thickness (4.76 mm) and the specified hole style to ensure correct positioning and clamping. For high‑precision non‑ferrous turning, contact Metav Werkzeuge to secure Tungaloy TH10 DNGG150402‑01 inserts or request tailored tooling recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6803190 Manufacturer SKU: TUN6803190 Model series: ISO turning indexable inserts Type designation: DNGG150402-01 Manufacturer: Tungaloy Material: Carbide Grade: TH10 (uncoated) Application: Turning Facts Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included angle: 55° Design & special features Rhombic plate form Cylindrical hole for clamping ISO‑standard indexable insert Chipbreaker: 01 Sharp universal grade for non‑ferrous materials Compatible with ISO holders depending on shape, relief, tolerance, clamping and thickness FAQ What materials is the TH10 grade best suited for? The TH10 uncoated grade is intended for non‑ferrous materials; the DNGG150402‑01 TH10 insert promotes low cutting forces and clean surfaces on alloys such as aluminium and brass. Can this insert be used for both external and internal turning? Yes, the ISO rhombic geometry of the DNGG150402‑01 makes it suitable for external and internal turning when mounted on an appropriately sized holder or boring bar. How is compatibility with a toolholder determined? Compatibility depends on plate form, relief angle, tolerance class, attachment method, size and thickness; ensure the holder matches the DNGG150402‑01 dimensions and the 0° relief specification for secure clamping. What advantage does the uncoated carbide provide? An uncoated carbide edge in TH10 offers a sharp cutting line that reduces cutting forces and minimises built‑up edge on non‑ferrous workpieces, improving surface finish and chip evacuation. Is the insert indexable and how does that affect productivity? The insert is indexable; rotating to a fresh cutting edge extends usable tool life and reduces tool change frequency, increasing uptime and lowering per‑part tooling cost for repetitive turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150402 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of an uncoated TH10 carbide grade for low cutting forces, a 0.2 mm corner radius for fine finishing, and ISO compatibility to maintain smooth turning operations. Order the DNGG 150402 TH10 directly via Metav Werkzeuge or ask our consultants for application support. DNGG 150402 TH10 Tungaloy indexable turning insert (rhombic, 55°) The DNGG 150402 TH10 is an ISO-standard rhombic indexable insert for external and internal turning, optimised for non-ferrous work and applications requiring a sharp, uncoated cutting edge ISO-standard rhombic geometry for indexable turning Uncoated TH10 carbide for low cutting forces 0.2 mm corner radius for fine surface finish Central cylindrical hole for secure clamping Consistent surface quality with an uncoated universal grade The combination of a TH10 uncoated grade and a deliberately sharp cutting edge provides low cutting forces and a reduced tendency for material build-up when machining non-ferrous components. This characteristic supports a cleaner surface finish and less secondary polishing, which is particularly advantageous in serial production and finishing operations. The uncoated carbide substrate also simplifies reconditioning in certain workflows, while maintaining cutting-edge integrity under stable cutting conditions. Geometry designed to reduce tool changes and improve process stability The rhombic shape with a 55° included angle delivers a balance between accessibility and cutting strength, enabling both external and internal turning operations with one insert family. The 0.2 mm corner radius helps achieve fine surface finishes without compromising edge life, so fewer tool changes are required during medium-to-fine turning passes. Clear geometry and standardised dimensions contribute to predictable chip formation and repeatable machining results. Secure mounting and compatibility with ISO toolholders Compatibility with the ISO turning system is ensured by standardised form, relief angle and dimensional tolerances; the insert features a cylindrical central hole and a plate thickness of 4.76 mm for robust clamping. The insert integrates into common holder assemblies—outer holder or boring bar—with the expected support components such as a seating pad, clamp set and replacement screws forming the complete system. This standardisation reduces set-up time and simplifies tool inventory management in production environments. Versatile application strategy for efficient machining Intended for turning, the insert performs well in both external and internal operations when matched with an appropriate chipbreaker (01) and the correct stability of the tool-holding system. Selecting the right chip control and feed parameters helps exploit the TH10 grade’s strengths: economical material removal with reliable surface results. The design supports productivity-focused shops seeking repeatable outcomes across batches while keeping tool management straightforward. For stock information and tailored application advice on the Tungaloy DNGG 150402 TH10 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803194 Manufacturer SKU: TUN6803194 SKU: 6803194-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNGG150402-01 Facts Corner radius: 0.2 mm Included angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Chipbreaker: 01 Special features Grade: TH10 (uncoated) Material: carbide Shape: rhombic Central cylindrical hole Intended application: turning (external and internal) ISO-standard indexable insert Compatible with standard holders, clamp sets and screws FAQ Which materials are best suited to this insert? The TH10 uncoated grade is optimised for non-ferrous materials; the DNGG 150402 TH10 insert from Tungaloy supports low cutting forces and clean surfaces when machining such alloys. Can the insert be used for both external and internal turning? Yes, the ISO rhombic geometry and 55° included angle make the insert suitable for both external and internal turning operations when used with a compatible holder. How is the insert secured in the toolholder? The insert features a central cylindrical hole and a 4.76 mm plate thickness; compatibility with the holder depends on form, relief angle, tolerance class, fastening method, size and thickness. What surface finish can be expected with the 0.2 mm corner radius? A 0.2 mm corner radius provides fine finishing capability and helps to achieve good surface quality with controlled cutting parameters on appropriate work materials. What identifiers and article numbers are associated with this part? The Tungaloy DNGG 150402-01 TH10 insert is listed under article number 6803194 and manufacturer SKU TUN6803194 Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150404 GH110 Wendeplatten - Tungaloy
Benefit from ISO compatibility, the GH110 wear‑resistant carbide grade and a precise 0.4 mm corner radius for consistent turning results; these attributes support stable cutting and repeatable surface quality. Order the DNGG 150404 GH110 insert directly via Metav Werkzeuge or ask our consultants for application advice. DNGG 150404 GH110 indexable turning insert — rhombic 15 mm, ISO 150404, Tungaloy DNGG150404 GH110 is an ISO‑standard rhombic indexable insert intended for external and internal turning, offering secure clamping and controlled chip formation in standard holder systems DNGG 150404 ISO insert, rhombic 15 mm GH110 Tungaloy carbide grade Double-sided chipbreaker, cylindrical hole 0° clearance angle, 4.76 mm thickness Predictable clamping and consistent cutting performance The ISO designation and standardised geometry ensure straightforward integration into compatible toolholders. Compatibility is determined by form, clearance angle, tolerance class, attachment, size and thickness, which together secure the insert and maintain cutting stability. For production environments this translates into reduced setup variance and more consistent part quality, since the insert seats reliably in the clamping pocket and preserves the intended cutting geometry throughout the operation. Balanced GH110 carbide for reliable wear behaviour The GH110 grade from Tungaloy combines wear resistance with sufficient toughness to keep the cutting edge stable under typical turning loads. As a carbide grade engineered for turning, it complements the insert geometry to deliver longer edge life and predictable tool change intervals. For process planning, this means a favourable cost‑per‑part ratio in mixed‑batch work where both tool life and surface integrity are required. Geometry designed for chip control and surface finish The rhombic form and double‑sided chipbreaker provide efficient chip control and allow either side of the insert to be utilised, improving economy. The 0° clearance angle suits neutral cutting approaches and supports versatility across external and internal turning tasks. The 0.4 mm corner radius contributes to robust edge strength while maintaining the capacity for fine surface finishes where small radii are required. The cylindrical hole enables secure fastening and repeatable seating in standard clamping systems. System setup guidance for reliable results A complete cutting system includes the ISO insert, a matching external holder or boring bar, a backing shim or clamp set and the correct fastening screws. Selection of chipbreaker style and grade should be aligned with the workpiece material, machining type and machine stability to achieve the best trade‑off between surface finish and productivity. The insert integrates into established tool systems and supports quick replacement with minimal adjustment when the holder and insert geometry are correctly matched. For dependable turning performance choose the Tungaloy GH110 grade insert and contact Metav Werkzeuge for tailored application advice and ordering assistance. Technical Data Article number: 6803208 Manufacturer SKU: TUN6803208 SKU: 6803208-Tungaloy Model series: ISO turning indexable inserts Name: DNGG150404 GH110 Tungaloy insert Facts Insert size: 15 mm Thickness: 4.76 mm Clearance angle: 0° Lead/cutting angle: 55° Corner radius: 0.4 mm Special features Carbide grade: GH110 (Tungaloy) Form: rhombic Chipbreaker: double-sided Hole: cylindrical Application: Turning ISO designation: 150404 FAQ What is the intended application of this insert? The DNGG150404 GH110 insert is intended for external and internal turning and suits operations where an ISO‑standard rhombic insert and controlled chip formation are required. How is compatibility with a toolholder determined? Compatibility is based on form, clearance angle, tolerance class, attachment method, insert size and thickness; matching these parameters ensures secure seating and correct cutting geometry. What does the GH110 grade offer? GH110 is a Tungaloy carbide grade that balances wear resistance and toughness, delivering stable cutting edges and suitable tool life for a variety of turning tasks. Which chip control features are included? The insert features a double‑sided chipbreaker and a rhombic shape to support repeatable chip control and efficient material evacuation during turning. What are the key dimensions to check before ordering? Key dimensions include the ISO designation 150404, insert size 15 mm, thickness 4.76 mm and corner radius 0.4 mm; confirm these against the holder pocket and fastening method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150404 GH110 Wendeplatten - Tungaloy
The combination of GH110 wear resistance, a 0.4 mm corner radius and ISO‑standard geometry ensures stable cutting performance and predictable tool life; ideal for shops seeking consistent turning results. Order the DNGG150404 GH110 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants for application advice. DNGG150404 GH110 Tungaloy indexable insert for turning The DNGG150404 GH110 Tungaloy indexable insert is an ISO‑standard, rhombic turning insert with a double‑sided chipbreaker, designed for both external and internal turning applications. ISO‑standard rhombic insert, 15 mm size GH110 Tungaloy carbide grade for wear resistance 0.4 mm corner radius for precise edge control Double‑sided chipbreaker, cylindrical centre hole Predictable edge life through a dedicated carbide grade The combination of the GH110 cutting grade and carbide substrate delivers balanced wear resistance and edge toughness for dependable machining cycles. By selecting this grade together with an appropriate chipbreaker geometry, shops gain longer intervals between index changes and a more consistent surface finish. This results in reduced process variation and fewer unplanned tool interventions, supporting a more economical production rhythm. Stable cutting, accessible geometry and improved process control A rhombic geometry with a 55° cutting edge and a 0.4 mm corner radius provides a reliable compromise between edge strength and detail work on turned contours. The insert's double‑sided chipbreaker and cylindrical centre hole ensure secure clamping and repeatable positioning in standard toolholders, reducing vibration and improving dimensional stability. These features support more predictable chip formation, helping to maintain machine uptime and consistent component quality. System integration and cost‑effective replacement strategy The insert is designed as part of an ISO insert system: the plate itself, a matching external holder or boring bar, a backer/clamp set and replacement screws form the working assembly. With a plate thickness of 4.76 mm and a nominal size of 15 mm, the component offers robust seating and multiple indexing edges, which lowers cost per cutting edge. The ability to replace only the cutting plate rather than the whole toolholder contributes to lower tooling expenditure and faster maintenance cycles. For assured turning performance with Tungaloy’s GH110 grade and reliable ISO compatibility, contact Metav Werkzeuge for stock availability or bespoke application advice — email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6803195 Manufacturer SKU: TUN6803195 Our SKU: 6803195-Tungaloy Designation: DNGG150404 GH110 Brand: Tungaloy Material: Carbide Model series: ISO turning indexable inserts Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 55° Design & features Rhombic plate shape Double‑sided chipbreaker Cylindrical centre hole ISO‑standard insert Intended use: turning Compatible with matching holders and clamp sets FAQ What materials is this insert suited for? The DNGG150404 GH110 Tungaloy indexable insert is optimised for general turning tasks where a balance of wear resistance and edge stability is required; specific material suitability depends on chosen chipbreaker and cutting parameters. How many usable cutting edges does the insert provide? With a double‑sided configuration and ISO rhombic form, the DNGG150404 offers multiple indexable edges; exact edge count depends on mounting orientation and whether both sides are utilised. What is the purpose of the cylindrical centre hole? The cylindrical centre hole on the DNGG150404 ensures precise and repeatable clamping in compatible toolholders, improving positional accuracy and reducing tool movement during heavy cuts. Can this insert be used for internal turning as well as external turning? Yes, the geometry and clearance angle of the DNGG150404 make it suitable for both external and internal turning operations when paired with an appropriate holder and set‑up. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150404 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of GH110 cutting grade, a 0.4 mm corner radius and a 55° approach angle for stable, repeatable cutting performance in turning operations; order the insert via Metav Werkzeuge or consult our specialists for holder and grade matching. DNGG 150404 GH110 — Tungaloy turning insert (rhombic, 15 mm, 55°) A DNGG150404 GH110 indexable turning insert engineered for ISO‑standard external and internal turning, offering a balanced mix of wear resistance and edge stability for productive metalcutting. ISO‑standard rhombic insert, 15 mm GH110 Tungaloy grade for wear resistance 0.4 mm corner radius for fine profiling Double‑sided chipbreaker, cylindrical hole Ensure stable, high‑productivity turning with optimised edge properties The combination of the GH110 cutting grade and carbide substrate delivers a predictable wear behaviour and reliable edge stability under varying cutting conditions. The insert’s double‑sided chipbreaker reduces chip formation and helps maintain consistent cutting forces, which directly improves process stability and tool life. The 55° approach angle favours versatile geometries for both finishing and medium machining, while the 0.4 mm corner radius allows for controlled corner strength and surface finish. These engineered properties translate into fewer tool changes and steadier cycle times on the shop floor. Easy integration into ISO tool systems and secure clamping Designed to the ISO geometry DNGG150404, the insert interfaces with holders according to form, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole enables positive locating and repeatable clamping when used with a suitable shim and clamping set. Specifying the correct holder and clamping hardware prevents instability that can otherwise cause edge chipping; the system approach—insert, appropriate external holder or boring bar, shim/clamping set and spare screws—ensures a secure mounting and straightforward replacement in production environments. Versatile use and practical selection guidance Intended for turning operations, this indexable insert suits a range of machining strategies; selection of the right chipbreaker variant and the GH110 grade should be matched to the workpiece material, machining mode and machine rigidity. The rhombic plate form and compact 15 mm size make the insert adaptable for both external and internal tasks where access or restriction demands a smaller footprint. Wherever a balance of wear resistance and edge toughness is required, this insert provides a cost‑effective option for high‑throughput workshops seeking reproducible results. For specification support, availability checks or to determine the correct holder and grade for a particular component, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Tungaloy GH110 turning inserts and system setup. Technical Data Article number: 6803201 Manufacturer article number: 6803201 SKU: 6803201-Tungaloy Manufacturer SKU: TUN6803201 ISO designation: 150404 Designation without grade: DNGG150404 Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 55° Clearance angle: 0° Special features Carbide material GH110 Tungaloy cutting grade Rhombic plate form Double‑sided chipbreaker Cylindrical hole for secure clamping ISO‑standard turning insert for external and internal turning System approach: insert + holder/boring bar + shim/clamping set + spare screws FAQ What machining tasks is this insert best suited for? The DNGG150404 GH110 Tungaloy turning insert is intended for external and internal turning operations where a balance of wear resistance and edge stability is needed; the rhombic form and 55° approach angle support both finishing and medium cuts. How should the insert be mounted to ensure repeatability? Use a matching ISO‑compliant holder or boring bar with the correct shim and clamping set; the cylindrical hole on the DNGG150404 insert and the standardised tolerance ensure repeatable locating when clamped correctly. Which feature most influences tool life for this grade? The GH110 grade combined with the carbide substrate provides the primary wear resistance; pairing that grade with the appropriate chipbreaker and stable clamping has the greatest effect on service life of the DNGG150404 insert. Can the insert be used for both roughing and finishing? Yes; with the right chipbreaker and cutting parameters the insert can serve for medium cuts and finishing, using the 0.4 mm corner radius for finer profiles and the 55° approach angle to moderate cutting forces. Is replacement hardware required when changing the insert? Replacement of the insert typically needs only standard clamping screws and possibly a shim, as the system concept anticipates spare screws and a clamping set for secure mounting; always verify compatibility with the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150404 GT9530 Wendeplatten - Tungaloy
Take advantage of a durable, high‑finish grade and stable ISO geometry for predictable turning performance; the GT9530 coated cermet provides extended life in finishing operations while the rhombic 55° geometry and precise dimensions ensure reliable clamping and repeatable results. Order the insert directly via Metav Werkzeuge or ask our consultants if clarification is needed. DNGG150404 GT9530 DNGG 150404 — ISO turning insert for external and internal turning by Tungaloy A DNGG150404 GT9530 ISO indexable insert engineered for external and internal turning, optimised for fine finishing and longer tool life under stable cutting conditions. ISO‑standard rhombic 55° geometry Coated cermet grade GT9530 for longer life Double‑sided insert, cylindrical hole Corner radius 0.4 mm, 4.76 mm thickness Consistent finishes from a wear‑resistant grade The GT9530 is a coated cermet grade tailored for finishing and light universal turning in steel, offering a balance between hardness and toughness that reduces edge cratering and improves surface quality. Cermet combines ceramic hardness with metallic toughness to resist abrasive wear while maintaining a sharp cutting edge; the coating further enhances wear resistance, so finishing passes deliver a more consistent surface roughness and longer intervals between index changes. This translates directly into fewer tool changes and steadier part quality in repetitive production runs. Predictable set‑up thanks to ISO geometry and precise dimensions Designed as an ISO‑compliant rhombic insert with a 55° included angle and 0° clearance, the geometry supports stable clamping and defined cutting kinematics. The rhombic profile is well suited for both external and internal turning, enabling access to shoulders and profiles while maintaining a controlled cutting engagement. Compatibility with toolholders is determined by form, clearance, tolerance class, fastening method, size and thickness—elements that ensure repeatability across tool changes and make tool management simpler in mixed‑tool fleets. Practical design for process reliability and simple selection A double‑sided chipbreaker and a cylindrical hole allow secure mounting and multiple usable edges, improving economy per insert without sacrificing stability. The corner radius 0.4 mm and plate thickness of 4.76 mm are suited to light finishing and semi‑finishing passes where surface integrity matters; the grade is especially productive under stable cutting conditions where vibration is controlled. For setups that require different cutting behaviour, selecting the right chipbreaker and matching holder geometry will optimise chip control and surface results. If technical cutting data or process matching are required, Metav Werkzeuge can provide tailored advice and recommended parameters. For fine finishing of steel components with reliable tool life, specify the Tungaloy GT9530 DNGG150404 insert and contact Metav Werkzeuge for application advice and rapid supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997765 SKU: 6997765-Tungaloy Manufacturer SKU: TUN6997765 Model series: ISO-Drehwendeschneidplatten Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 55° Special features Grade: GT9530 (coated cermet) Shape: rhombic Hole: cylindrical, with hole Chipbreaker: double‑sided Material: carbide Typical application: external and internal turning FAQ What is the primary application for this insert? The DNGG150404 GT9530 insert from Tungaloy is intended for external and internal turning, with an emphasis on finishing and light universal operations in steel. Which materials does the GT9530 grade suit best? GT9530 is formulated as a coated cermet grade for steel machining where a fine surface finish and extended tool life are required under stable cutting conditions. How does the insert attach to a holder? Mounting relies on the cylindrical hole and the ISO rhombic form; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness to ensure secure clamping and repeatable positioning. What advantages does the double‑sided chipbreaker provide? A double‑sided chipbreaker offers flexible chip control and multiple usable cutting positions, increasing economy per insert while maintaining stable cutting performance. Is the corner radius suitable for finishing work? Yes, the 0.4 mm corner radius is chosen for light finishing passes where surface quality is a priority and controlled tool engagement reduces vibration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150404 GT9530 Wendeplatten - Tungaloy
Conflicting product information prevents a reliable product description. One specification denotes the insert as cemented carbide while another identifies it as a coated cermet grade. This inconsistency creates confusion and makes it challenging to determine the accurate material classification, which is essential for ensuring proper application and compliance with industry standards. Please verify the material designation (cemented carbide versus cermet) and provide corrected data, including any additional relevant details such as coating type, composition, or intended use, so a complete, standards‑compliant description can be produced and shared with stakeholders to avoid further misunderstandings or potential issues in the future.
DNGG 150404 NS520 Wendeplatten - Tungaloy
Combining the NS520 cermet grade with ISO 150404 geometry and a 55° profile, this insert delivers consistent surface quality, predictable wear and efficient finishing in turning operations; order directly via Metav Werkzeuge or consult our specialists for application support. DNGG 150404 NS520 Turning Insert – Tungaloy, ISO rhombic insert for turning DNGG150404 NS520 Tungaloy turning insert designed for finish to light turning operations on steel, offering a rhombic shape with a 55° included angle and a focus on reproducible surface finish and dimensional accuracy ISO 150404 rhombic insert NS520 cermet grade for fine finishing Double-sided with 0° clearance Cylindrical hole for secure clamping Consistent finishing from a cermet grade built for surface quality The NS520 cermet specification is developed for finish to light machining of steel, prioritising surface finish and dimensional stability. A cermet cutting material delivers reduced built-up edge and a stable cutting edge that helps achieve low roughness values on turned components. Selecting this grade and a suitable double-sided chipbreaker enables longer intervals between tool changes and more predictable tool life, which translates into fewer interruptions and higher part uniformity in serial production. Geometry and mechanics engineered for stable turning results The rhombic geometry with a 55° included angle and a corner radius of 0.4 mm provides a balance between cutting edge strength and fine finishing capability. The insert comes with a 0° clearance angle, a plate thickness of 4.76 mm and a cylindrical mounting hole, which together ensure secure clamping and rigidity in the toolholder. These features reduce vibration and support consistent chip formation when paired with an appropriate holder and clamping set. The double-sided design doubles usable edges, improving cost-efficiency while maintaining cutting stability. System compatibility and practical application guidance As an ISO-standard turning insert, compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; therefore the ISO 150404 designation simplifies matching to standard external or internal turning holders. Typical use is external and internal turning; choose the double-sided chipbreaker and the NS520 grade according to workpiece material, machining strategy and machine rigidity. The recommended system comprises the ISO insert, a matching external holder or boring bar, an underlay/shim or clamp set and replacement screws to ensure secure mounting and repeatable set-up. For expert selection of Tungaloy NS520 finishing inserts and tailored tooling combinations, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for application advice and immediate availability Technical Data Article number: 6803196 Manufacturer SKU: TUN6803196 SKU: 6803196-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNGG150404 Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° ISO code: 150404 Special features Material: Hartmetall Cutting material: Cermet (NS520) Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning Compatibility: ISO-standard inserts for matched holders FAQ What materials is this insert intended for? The NS520 grade is specified for finish to light machining of steel and the insert is optimised for achieving good surface finish and dimensional accuracy with steel workpieces. How does the DNGG150404 geometry affect cutting performance? The rhombic 55° profile and 0.4 mm corner radius of the DNGG150404 insert support a balance of edge strength and fine finishing, producing stable cutting conditions and predictable wear during turning. Is the insert reversible and how many cutting edges are available? The double-sided design offers two usable cutting edges per side, increasing overall edge economy while maintaining the geometry needed for precise finishing. Which holders are compatible with this ISO insert? Compatibility follows ISO standards; holders must match the insert form, size, thickness, relief angle and fastening method—ensure the toolholder accepts ISO 150404 rhombic inserts and uses the cylindrical hole for secure clamping. What is the manufacturer's article number and SKU for ordering? Manufacturer article number is 6803196 and the manufacturer SKU is TUN6803196 for the DNGG150404 NS520 Tungaloy turning insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNGG 150404 NS9530 Wendeplatten - Tungaloy
High‑precision finishing with a sharp cutting edge and low cutting forces: the ISO rhombic insert DNGG150404 in NS9530 uncoated cermet delivers excellent surface integrity and reliable chip control. Order directly via Metav Werkzeuge or consult the technical team for application matching. DNGG 150404 NS9530 Turning Insert, 0.4 mm Radius — Tungaloy A DNGG 150404 NS9530 rhombic ISO turning insert engineered for fine finishing of steel, offering a sharp edge and low cutting forces for continuous cuts and small depths of cut ISO rhombic insert DNGG 150404 Uncoated cermet grade NS9530 0.4 mm corner radius for fine finishing Double‑sided chipbreaker with cylindrical hole Delivering fine finishing and low cutting forces The NS9530 uncoated cermet is a finishing grade developed for high surface quality on steel. Its sharp cutting edge and reduced cutting forces make it particularly effective for continuous cuts and modest depths of cut, where surface integrity and dimensional accuracy are primary objectives. By using this grade, manufacturers can reduce secondary finishing steps and achieve consistent part quality, making the process more predictable and cost‑effective. Reliable ISO compatibility and secure clamping Designed to the ISO system, the insert form and dimensions ensure straightforward retrofitting into standard holders. Compatibility is defined by insert shape, ISO designation, relief angle, tolerance class, fastening method, size and thickness; the cylindrical hole and specified geometry enable stable clamping and repeatable seating. This stability contributes to reduced vibration and improved tool life, supporting smoother production runs and fewer interruptions. Process efficiency for finishing turns and small depths The rhombic geometry with a 0.4 mm corner radius and a double‑sided chipbreaker supports controlled chip formation during turning operations, aiding continuous cuts and precise small‑step machining. The plate’s 4.76 mm thickness and standard form allow predictable thermal and mechanical behaviour under finishing conditions. Select the chipbreaker style and insert grade to match workpiece material and machine stability; the result is improved surface finish and fewer rejects, which enhances overall throughput and profitability. For precise finishing with Tungaloy NS9530 inserts, contact Metav Werkzeuge for ordering and tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997799 Manufacturer SKU: TUN6997799 Model series: ISO turning inserts Material: Carbide Core specifications Insert designation: DNGG150404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 mm Clearance angle: 0° Approach/angle: 55° Design and special features Rhombic plate form With hole Cylindrical hole style Double‑sided chipbreaker Uncoated cermet grade NS9530 Suitable for Turning Sharp cutting edge, finishing grade ISO‑standard insert FAQ Which materials are suited to this insert? The DNGG150404 NS9530 is a finishing grade optimised for steel; the uncoated cermet delivers low cutting forces and high surface quality on continuous turning operations. How is holder compatibility ensured? Compatibility depends on insert form, relief/clearance angle, tolerance class, fastening, size and thickness; the ISO designation and cylindrical hole aid correct seating and clamping. What characterises the NS9530 grade? NS9530 is an uncoated cermet finishing grade from Tungaloy, offering a sharp cutting edge and low cutting forces for superior surface integrity during finishing turns. What benefit does the double‑sided chipbreaker provide? The double‑sided chipbreaker improves chip control for continuous cuts and small depths, supporting stable machining and consistent surface finish. When should this insert be chosen over other grades? Select this insert for finishing operations on steel when a very fine surface finish and minimal cutting forces are required; pair with a suitable holder and stable setup for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com