DNMG 110404 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a CVD-coated carbide grade designed for steel, and a compact 0.4 mm corner radius to maintain stable cutting in interrupted and unstable turning operations; order directly via Metav Werkzeuge or consult the team for application support. DNMG 110404 T9235 ISO turning insert — Tungaloy, CVD-coated carbide, 0.4 mm radius DNMG110404 T9235 is an ISO-standard rhombic turning insert for external and internal turning, optimised for steel machining under unstable or interrupted-cut conditions. CVD-coated carbide T9235 for steel Rhombic ISO insert, 55° geometry 0.4 mm corner radius for versatility Double-sided chipbreaker for chip control Cylindrical hole, 4.76 mm thickness Robust cutting performance for interrupted and unstable turning The insert offers a CVD-coated carbide substrate in the T9235 grade, developed for steel at moderate cutting speeds and in less stable setups. The coating promotes a stable cutting edge and reduces flank wear, meaning more reliable tool life in applications with interrupted cuts or variable rigidity. The rhombic 55° geometry provides a good compromise between cutting strength and accessibility for diverse turning tasks, while the small 0.4 mm corner radius enables controlled finish passes without sacrificing robustness. These characteristics translate into more predictable cycle times and reduced rework rates in production environments. ISO compatibility and straightforward tool-system integration Supplied as an ISO-standard DNMG insert, compatibility with holders is defined by shape, relief angle, tolerance class, clamping method, size and thickness. The insert’s rhombic form and cylindrical hole ensure secure mounting in standard DNMG holders; the specified 0° relief angle and thickness of 4.76 mm match common clamping systems. For efficient tool changes, select a matching outer holder or boring bar that accepts DNMG110404 geometry and use the recommended clamping hardware. Clear system alignment reduces set-up time and supports repeatable positioning, which is essential for batch production and mixed-operation turning. Cost-effective edge life and process security in everyday production Designed as a double-sided insert with two usable cutting edges per face, the component lowers cost per edge and simplifies stock management. The T9235 carbide composition is aimed at heavy-duty, tough-cut conditions where improved fracture resistance and stable chip formation are priorities. Combined with the insert’s chipbreaker geometry, the design enhances chip control and prevents entanglement in interrupted or unstable cuts, supporting consistent surface quality. Choosing this insert contributes to higher uptime and fewer unscheduled tool swaps, offering a measurable effect on overall productivity. For machining steel with proven process security using Tungaloy’s T9235 grade, contact Metav Werkzeuge for ordering and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785981 Manufacturer SKU: TUN6785981 Vendor SKU: 6785981-Tungaloy ISO designation: DNMG110404 Grade/sort: T9235 Specifications Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Insert angle: 55° Hole: with cylindrical hole Features Material: carbide Coating: CVD-coated carbide (T9235) Shape: rhombic Chipbreaker: double-sided Application: turning (external and internal) Typical system: ISO insert, compatible holders and clamping sets Usage note: select chipbreaker and grade according to workpiece material and stability FAQ What machining tasks is this insert suited for? The DNMG110404 T9235 insert by Tungaloy is intended for external and internal turning, especially for steel workpieces where interrupted cuts or less stable setups occur. How does the T9235 grade affect tool life? The T9235 CVD-coated carbide provides enhanced toughness and abrasion resistance for steel machining; the Tungaloy grade promotes stable edge life under lower cutting speeds and variable cutting conditions. Is the insert reversible and how many cutting edges are available? This is a double-sided DNMG insert, offering multiple cutting edges per insert to reduce cost per edge and support efficient inventory use. Which holder type is required for safe clamping? Compatibility is determined by the DNMG form, relief angle, tolerance class, clamping method, size and thickness; use an ISO-compatible DNMG holder or boring bar that accepts the DNMG110404 geometry. Can this insert be used for finishing passes? The 0.4 mm corner radius and 55° geometry allow controlled finishing passes; choose cutting parameters and holder rigidity to match the desired surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade designed for process security, a 55° rhombic geometry for versatile turning, and a reliable double-sided chipbreaker to keep cycles running with consistent quality; order the inserts directly via Metav Werkzeuge or consult the technical team for application advice. DNMG110408 AH120 Tungaloy indexable insert — ISO turning insert, 55° rhombic, PVD-coated carbide DNMG110408 AH120 is an ISO-format indexable insert for external and internal turning, suited to ISO-compatible holders and applications requiring a sharp cutting edge and robust process reliability. DNMG geometry, 55° rhombic PVD-coated carbide AH120 Double-sided chipbreaker Cylindrical hole for secure clamping Consistent cutting performance for productive turning The combination of a PVD-coated surface on a carbide substrate and the AH120 grade delivers wear- and breakage-resistant performance for stable machining. The coated layer reduces flank wear and enhances edge integrity, which means fewer unplanned tool changes and a steadier surface finish on workpieces. With the double-sided chipbreaker, chip control is improved across a range of cutting conditions, supporting both semi-finish and general-purpose turning operations while maintaining predictable tool life. Designed for fast setup and reliable clamping The rhombic shape with a cylindrical hole and the standard ISO designation ensure straightforward selection and secure mounting in compatible holders. The geometry with a 55° lead angle optimises access for external and internal turning, while the 0.8 mm corner radius balances edge strength and surface quality. The insert’s format matches common holder form, clearance angle and tolerance classes, simplifying replacement and reducing machine downtime when changing tools. Application-focused grade that balances edge sharpness and security The AH120 grade was developed to combine a sharp cutting edge with robust resistance to chipping, making it suitable when process security is required alongside good surface quality. The PVD-coated finish supports machining of a wide range of materials commonly encountered in turning tasks. Selecting this grade and the appropriate chipbreaker contributes directly to productive cycles and fewer rejects, helping to maintain throughput and reproducible results across series production. Contact Metav Werkzeuge for tailored application support, quoting the DNMG110408 AH120 Tungaloy insert and the TUN6793703 SKU, or request machining recommendations by phone or email via Metav Werkzeuge’s technical team. Technical data Article number: 6793703 SKU: 6793703-Tungaloy Manufacturer SKU: TUN6793703 Model series: ISO turning indexable inserts Material: Carbide Facts Size designation: 11 Corner radius: 0.8 mm Insert angle: 55° Relief angle: 0° ISO code: 110408 Special features PVD-coated carbide, AH120 grade Rhombic insert shape (DNMG) Cylindrical hole for clamping Double-sided chipbreaker ISO-standard turning insert Suitable for external and internal turning FAQ What materials is this insert suitable for? The AH120 grade is a wear- and breakage-resistant PVD-coated carbide designed for a broad material range in turning; selection of the chipbreaker and cutting data should match the workpiece material for optimal results. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO DNMG110408 geometry and is compatible with holders that accept the DNMG form, matching the form, clearance, tolerance class, clamping style, size and thickness. What are the benefits of the AH120 grade? AH120 provides a balance between a sharp cutting edge and process reliability, reducing the risk of edge chipping while maintaining good surface finish and predictable tool life. How does the chipbreaker affect performance? The double-sided chipbreaker improves chip control across varied cutting conditions, aiding evacuation, reducing heat at the cutting edge and supporting consistent surface quality. Can the insert be used for both roughing and finishing? Yes; tool life and surface finish depend on the chosen chipbreaker, feed and speed. The AH120 grade and the 0.8 mm corner radius are suitable for flexible use between semi-finish and general-purpose finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH120 wear resistance, a sharp cutting edge and a 55° rhombic geometry for steady production and predictable tool life; order the insert through Metav Werkzeuge or consult their specialists for tailored advice. DNMG 110408 AH120 ISO turning insert, PVD-coated carbide, 55° – Tungaloy A DNMG110408 AH120 ISO turning insert engineered for external and internal turning, offering a sharp cutting edge and reliable process stability in general turning applications PVD-coated carbide AH120 for wear resistance ISO DNMG 110408 rhombic insert, 55° cutting angle Double-sided chipbreaker, cylindrical-hole clamping Sharp cutting edge for process reliability Longer tool life through wear-resistant grade and coating The combination of a PVD-coated finish and the AH120 carbide grade yields a tool body designed for high resistance to wear and chipping, which translates into extended intervals between indexings and lower tool consumption. This grade is formulated to maintain a sharp cutting edge under normal turning conditions, so machinists benefit from more consistent component dimensions and fewer random interruptions. The coating also contributes to thermal stability at the cutting zone, supporting reproducible machining parameters on a wide range of materials where a sharp edge and process security are required. Precise geometry and dimensions for reliable clamping and repeatability The rhombic insert geometry with a 55° approach, a corner radius of 0.8 mm, and a plate thickness of 4.76 mm ensure a predictable cutting behaviour and mechanical stability in the toolholder. The specification includes a cylindrical hole for secure fastening; compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness. As part of an ISO insert system, this plate integrates with standard external holders, boring bars and mounting sets; recommended system components include a matched external holder or boring bar, a locating shim or clamp set and replacement screws for safe assembly. Improved chip control and surface quality for efficient turning The double-sided chipbreaker design supports controlled chip formation across a variety of cutting conditions, reducing the need for excessive manual intervention and helping maintain surface finish integrity. In practice, the chipformer and the sharp geometry work together to lower cutting forces during stable machining, which is especially beneficial when process reliability is a priority. For external and internal turning operations that demand repeatable results, the insert promotes steady cutting behaviour, aiding efficient cycle times and consistent part quality without frequent rework. Contact Metav Werkzeuge for application-specific recommendations on the Tungaloy DNMG 110408 AH120 insert or to request a quotation by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6793706 Manufacturer SKU: TUN6793706 Our SKU: 6793706-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Cutting angle: 55° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 mm Special features PVD-coated carbide grade AH120 Rhombic plate form Double-sided chipbreaker Cylindrical hole for clamping FAQ What applications is this insert best suited for? The DNMG110408 AH120 insert is intended for general external and internal turning where a sharp cutting edge and process stability are required; its geometry and chipbreaker suit a range of routine turning tasks. Which holder features are required for correct compatibility? Compatibility depends on holder form, clearance (frewinkel), tolerance class, fastening type, size and plate thickness; use a holder matched to the ISO DNMG specification and secure with the appropriate shim or clamp set. Can this insert be used for finishing and medium turning operations? Yes, the combination of the sharp edge and the double-sided chipbreaker makes the insert suitable for finishing and many medium-turning jobs where surface quality and consistent chip control matter. How does the AH120 grade affect productivity? The AH120 grade, with a PVD coating, provides improved wear resistance and fracture tolerance, contributing to fewer unexpected tool changes and more predictable tool life, which supports higher productivity. What are the identifying numbers for ordering spare plates? Order using the article number 6793706 or manufacturer SKU TUN6793706 to ensure the correct DNMG110408 AH120 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Combine the PVD-coated AH6225 carbide grade with ISO DNMG geometry for reliable, repeatable turning performance in stainless steels; the rhombic 55° form and double-sided design deliver cost-efficient indexing and stable cutting. Order via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG110408 AH6225 Tungaloy turning insert — PVD-coated carbide, rhombic 55° The DNMG110408 AH6225 is an ISO rhombic insert intended for general-purpose external and internal turning, optimised for machining stainless steels with a sharp but robust cutting edge. PVD-coated carbide grade AH6225 Universal for stainless steels Rhombic 55° geometry for stable cutting Double-sided insert with cylindrical hole Precision and consistent surface quality on stainless steels The PVD-coated carbide grade AH6225 combines a wear-resistant surface layer with a substrate engineered for toughness, resulting in a stable cutting edge under varying conditions. This pairing supports predictable tool life during medium cutting operations and helps maintain consistent workpiece finish when machining stainless steels. The built-in double-sided chipbreaker promotes reliable chip control, reducing the risk of surface marks and enabling continuous production with fewer interruptions. Secure clamping and geometry designed for repeatability The insert’s rhombic 55° geometry and 0° relief are matched to common ISO holders, so mechanical stability is ensured when the correct tolerance class and fastening are used. A corner radius of 0.8 mm balances edge strength with surface finish, while the 4.76 mm plate thickness and 11 mm inscribed size provide rigidity for typical external and internal turning tasks. Compatibility with a standard clamping system and a cylindrical locating hole allows safe indexing and simple replacement, supporting short downtime during tool changes. Productivity advantages and application guidance for production environments Designed as part of an ISO turning insert system, this component is double-sided for economical use and suited to series production where consistent results matter. The PVD coating helps resist built-up edge and abrasion, which contributes to steady performance under variable cutting parameters; the AH6225 grade is therefore recommended for operations where a sharp yet durable edge is required. Selection of the correct chipbreaker and holder geometry will further enhance process stability and part quality in high-volume turning cells. The insert’s ISO conformity simplifies tool management and replenishment in organised production settings. For application-specific advice or to secure stock of the Tungaloy DNMG110408 AH6225 turning insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 — our technical team will advise on grade and chipbreaker selection Technical data Article number: 6947084-Tungaloy Manufacturer article number: 6947084 Manufacturer SKU: TUN6947084 Manufacturer: Tungaloy Facts Insert designation: DNMG110408 Size (inscribed circle): 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Hole: cylindrical Special features Material: carbide Coating: PVD Grade: AH6225 Shape: rhombic Double-sided with chipbreaker ISO model series: ISO turning inserts Application: turning (external and internal) Compatibility: standard ISO holders, clamping systems FAQ What materials is this insert suitable for? The AH6225 grade is formulated primarily for machining stainless steels; the DNMG110408 insert performs well in medium cutting operations where a sharp, stable edge is required. How does the PVD coating benefit tool life? A PVD-coated carbide substrate reduces abrasive wear and helps prevent built-up edge, which extends usable tool life and maintains consistent surface quality for the insert. Can the insert be indexed to use multiple cutting edges? Yes, the insert is double-sided and features a cylindrical hole for secure clamping, allowing indexing to a fresh edge and reducing tooling costs per part. Which geometry considerations ensure holder compatibility? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the rhombic DNMG form and the specified dimensions match standard ISO holders when the appropriate tolerance class and clamp are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH6225 grade that combines a sharp, stable cutting edge with wide material coverage to keep production running smoothly; the 55° rhombic geometry and secure clamping via a cylindrical hole ensure repeatable mounting and dimensional stability. Order directly via Metav Werkzeuge or consult the team for grade and holder matching. DNMG 110408 AH6225 turning insert (55° rhombic, PVD-coated) — Tungaloy DNMG110408 AH6225 is an ISO-standard indexable insert for turning, optimised for stainless steels and medium-duty machining. PVD-coated carbide AH6225 grade Optimised for stainless steel machining 55° rhombic shape with 0° clearance Double-sided insert with cylindrical hole Consistent edge performance for stainless steel turning The combination of PVD-coated surface treatment and AH6225 grade carbide creates a balance between a sharp cutting edge and wear resistance, especially in demanding stainless steel applications. The coating increases thermal and chemical resistance, which helps to reduce built-up edge under variable cutting conditions. As an ISO-style indexable insert, the component supports predictable tool life and reduces the frequency of unscheduled tool changes, translating to improved machine uptime and process reliability. Geometry and clamping that deliver dimensional repeatability The 55° rhombic design with a 0° clearance angle provides a stable seating in compatible holders and promotes steady axial and radial engagement during turning operations. The insert features a 0.8 mm corner radius and a plate thickness of 4.76 mm, giving a useful compromise between strength and edge detail for medium cuts. The cylindrical hole and the double-sided configuration simplify rotation and re-indexing, while the rhombic form supports both external and internal turning when matched to the correct holder and tolerance class. Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness. Reduce inventory complexity and increase shop productivity Using a universal grade aimed at stainless steels reduces the need for multiple specialised inserts, supporting better stock management and quicker set-ups. The ISO-standard format and the double-sided design offer economical use of cutting edges and straightforward replacement procedures, which together lower cost per component. Stable chip formation and a reliable cutting-edge geometry help to maintain consistent surface finish and dimensional accuracy, making this insert suitable for mixed-batch production and shops aiming for predictable, repeatable results. For advice on integrating the Tungaloy DNMG110408 AH6225 insert into existing toolholders or to arrange supply through Metav Werkzeuge, contact the Metav Werkzeuge team for tailored recommendations and stock information Technical data Article number: 6966171 Manufacturer article number: 6966171 SKU: 6966171-Tungaloy Manufacturer SKU: TUN6966171 Model series: ISO turning indexable inserts Application: Turning Material: carbide Grade/coating: AH6225, PVD-coated Manufacturer: Tungaloy Facts ISO designation: DNMG110408 Insert size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Wedge/approach angle: 55° Clearance angle: 0° Hole: with hole Hole style: cylindrical Special features Rhombic plate form Double-sided chipbreaker Universal grade for stainless steels Compatibility determined by form, clearance, tolerance, fastening, size and thickness Suitable for external and internal turning FAQ Is this insert suitable for machining stainless steels? The DNMG110408 AH6225 indexable insert is designed as a universal grade for stainless steels, combining a PVD-coated carbide with a geometry that reduces built-up edge in such materials. What is the advantage of the AH6225 grade? AH6225 offers a sharp yet stable cutting edge for medium machining; the PVD coating improves wear resistance and heat tolerance for extended, consistent performance with the DNMG110408 insert. How is the insert clamped and located in the holder? The insert has a cylindrical hole and ISO rhombic form; secure clamping depends on matching holder form, clearance, tolerance class, fastening, size and thickness for repeatable seating. Can the DNMG110408 be re-indexed for multiple edges? Yes, the insert is double-sided and reversible, allowing rotation to present fresh cutting edges and thus extend usable life per insert. What cutting tasks is the insert optimised for? This PVD-coated carbide insert is optimised for medium-duty turning operations on stainless steels and similar alloys, providing a compromise between finish quality and edge robustness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide AH6225 grade, a 55° DNMG rhombic geometry and a robust cylindrical-hole clamping for reliable medium turning operations; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our technical team for selection support. DNMG 110408 AH6225 Turning insert — PVD-coated carbide, 55° rhombic form (Tungaloy) DNMG 110408 AH6225 is an ISO-format turning insert optimised for medium machining, offering a sharp yet stable cutting edge for stainless-steel applications. DNMG geometry for versatile external and internal turning PVD-coated carbide grade AH6225 for stainless steels 55° rhombic form with 0° clearance angle Cylindrical-hole design for secure clamping Consistent cutting performance for stainless steels The PVD-coated carbide in grade AH6225 combines a sharp cutting profile with increased edge stability, making it well suited to the demands of stainless steels under variable conditions. The surface layer produced by the PVD process improves wear resistance and helps control built-up edge formation, which extends tool life in interrupted cuts and when feed or speed fluctuate. For workshops seeking predictable cycle times and fewer insert changes, this indexable grade offers a reliable balance between edge retention and toughness. Optimised geometry for secure clamping and stable cuts The DNMG rhombic shape with a 55° included angle and a corner radius of 0.8 mm provides a favourable combination of approach angle and strength for medium-depth turning. The insert’s 0° clearance supports a stable contact surface and the cylindrical hole enables repeatable clamping with many common ISO-compatible holders. Because compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening, size and thickness, the system approach — insert plus holder, shim and replacement screw — ensures a secure assembly and consistent cutting forces, reducing vibration and improving surface finish. Simple integration into ISO turning systems for higher productivity As an ISO-standard indexable insert, the DNMG 110408 variant slots into established turning systems with minimal adjustment. The double-sided chipbreaker design allows the insert to be rotated and reused, which supports economical tooling practices and reduces inventory variety. Typical setups comprise the ISO insert, a matching external holder or boring bar, a shim or clamp set and spare screws. For manufacturers prioritising throughput and reproducibility, the combination of a stable geometry and the AH6225 grade provides a pragmatic route to higher productivity and predictable process windows. Contact Metav Werkzeuge to check cutting data and confirm suitability for the intended stainless-steel application; Metav Werkzeuge’s consultants can advise on holder pairing and chipbreaker selection — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6903186 SKU: 6903186-Tungaloy Manufacturer SKU: TUN6903186 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Insert designation: DNMG110408 Size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features Material: cemented carbide Coating: PVD Grade: AH6225 Geometry: rhombic DNMG Chipbreaker: double-sided Application: Turning (external and internal) System composition: ISO insert, compatible holder or boring bar, shim/clamp set, replacement screws Intended use: universal grade for stainless steels FAQ Which materials is this insert suitable for? The DNMG 110408 AH6225 turning insert from Tungaloy is optimised for stainless steels, designed for medium machining where a sharp, stable edge is required. How does compatibility with holders work for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG110408 format fits standard ISO DNMG holders when matching those parameters. What are the key dimensions and identifiers for ordering? Key data: DNMG110408 designation, corner radius 0.8 mm, thickness 4.76 mm, angle 55°; order using SKU 6903186-Tungaloy or manufacturer SKU TUN6903186. Is the insert indexable and reversible? Yes — the insert is double-sided with a chipbreaker on both faces, allowing rotation and reuse to extend service life. What coating and grade does it use and why does that matter? The insert uses a PVD-coated cemented carbide in grade AH6225, providing a wear-resistant surface and the edge properties required for reliable stainless-steel machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Choose the combination of PVD-coated carbide grade AH6225 and the ISO rhombic DNMG 110408 geometry for efficient, reliable turning of stainless steels; the 0° clearance and 0.8 mm corner radius ensure a stable cutting edge and consistent chip control. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. DNMG110408 AH6225 Tungaloy indexable turning insert — PVD-coated carbide, 55° rhombic geometry A DNMG110408 AH6225 indexable turning insert designed for external and internal turning, offering a sharp yet robust cutting edge for machining stainless steels and varied production conditions. PVD-coated carbide AH6225 for stainless steels ISO rhombic DNMG 110408 geometry 0° clearance angle for high stability Double-sided chipbreaker with cylindrical hole Consistent machining performance for stainless steels The combination of a PVD-coated carbide substrate and the AH6225 grade provides a balance between edge sharpness and wear resistance, tailored for the demands of machining stainless steels. This composition reduces the risk of built-up edge and maintains cutting-edge integrity under fluctuating feeds and coolant conditions, resulting in longer tool life and fewer insert changes. The rhombic geometry with a 55° included angle produces reliable cutting forces and is suited to both finishing and medium-depth cutting passes, improving process repeatability in batch production. Designed for straightforward holder compatibility and system integration The insert follows the ISO standard for rhombic turning inserts, so compatibility with external holders is determined by form, clearance angle, tolerance class, fastening style, size and thickness. The 0° clearance angle and standard dimensions (11 mm size, 4.76 mm thickness) simplify selection of a matching clamping set and screw, and the cylindrical central hole enables secure seating in many common holder designs. Clear labelling of the ISO designation and grade helps streamline inventory management and tool-change procedures on the shop floor. Reliable chip control and workshop advantages A double-sided chipbreaker optimised for the AH6225 grade offers consistent chip formation across a range of feeds; this reduces interruptions from tangled or long chips and supports safer, cleaner operation. The 0.8 mm corner radius balances edge strength and surface finish, while the insert’s double-sided nature provides economical use of the cutting edges. Together, these attributes lower downtime, reduce tooling costs over time and support stable cycle times in production environments. Practical selection guidance and application notes When specifying an insert for turning, consider the workpiece material, desired surface finish and machine rigidity. The AH6225 grade is a universal choice for stainless steels and suits operations where a dependable edge life under variable conditions is required. In tougher material families or for heavy interrupted cuts a different grade or positive geometry might be preferable; for general-purpose turning at moderate depths this insert provides a strong mix of productivity and process security. If needed, the technical team at Metav Werkzeuge can advise on holder selection, cutting parameters and coolant strategies to match the machining task. Contact Metav Werkzeuge for tailored advice on using Tungaloy inserts in production and to request the DNMG110408 AH6225 with SKU 6903195-Tungaloy or manufacturer SKU TUN6903195 Technical Data Article number: 6903195 SKU: 6903195-Tungaloy Manufacturer SKU: TUN6903195 Brand: Tungaloy Model series: ISO turning insert series Facts Geometry: DNMG 110408 (rhombic, 55°) Corner radius: 0.8 mm Clearance angle: 0° Thickness: 4.76 mm Size: 11 mm Manufacturer item number: 6903195 Special features Material: carbide Coating/grade: AH6225, PVD-coated carbide Chipbreaker: double-sided Hole: cylindrical central hole Application: turning (external and internal) ISO-standardised insert for compatibility with ISO holders FAQ What materials is this insert suited for? The DNMG110408 AH6225 insert is formulated for machining stainless steels; the PVD-coated carbide grade AH6225 gives a sharp, wear-resistant cutting edge suitable for variable conditions. How does the 0° clearance angle affect cutting? A 0° clearance angle provides a robust cutting geometry that helps maintain edge stability during medium-depth cuts; the DNMG110408 geometry preserves consistent cutting forces. How many usable edges does the insert offer? The insert is double-sided with a reversible design, offering multiple cutting edges for extended tool life; refer to SKU 6903195-Tungaloy for order details. Which holders are compatible with this ISO insert? Compatibility depends on holder form, tolerance class, fastening method, size and thickness; the ISO rhombic standardisation of the DNMG110408 simplifies selection of a matching external holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide grade and the 55° rhombic geometry to secure consistent performance in medium turning operations; the stable cutting edge and double-sided chipbreaker promote reliable metal removal and good surface quality. Order the DNMG 110408 AH6225 insert directly via Metav Werkzeuge or contact the technical team for application guidance. DNMG 110408 AH6225 turning insert — PVD-coated carbide, 55° rhombic geometry, for turning DNMG 110408 AH6225 is an ISO-form indexable turning insert designed for general turning tasks, optimised for stainless steels and medium cutting conditions PVD-coated carbide for stainless steel 55° rhombic shape for versatile turning Double-sided chipbreaker, 0.8 mm corner radius Reliable cutting performance for stainless steels The PVD-coated carbide composition of this indexable insert delivers a balanced combination of edge sharpness and wear resistance, which is essential when machining stainless steels that work-harden or tend to adhere to the cutting edge. The manufactured cutting grade AH6225 is formulated for stable chip formation and durability under fluctuating conditions; this reduces unplanned tool changes and supports consistent machining cycles. By selecting a grade optimised for these materials, production planners and shopfloor engineers secure improved process stability and predictable tool life. Geometry and chip control for predictable turning The 55° rhombic geometry with a 0.8 mm corner radius provides a flexible compromise between form accuracy and edge strength, making the insert suitable for facing and external turning where a defined corner radius improves edge engagement. The insert’s double-sided chipbreaker aids controlled chip segmentation across a range of depths of cut, which lowers cutting forces and improves surface finish. For applications that require repeatability, the ISO‑standardised form ensures that mating toolholders and clamping parts locate the insert consistently, simplifying changeovers and minimising setup variance. System compatibility and practical integration Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation and standard dimensions enable quick matching to appropriate holders, boring bars or external turning tool assemblies. The insert features a cylindrical hole for secure fastening and a plate thickness of 4.76 mm, supporting robust clamping and resistance to bending moments during interrupted cuts. When assembling a cutting system, include a matched holder, the correct clamp set and the recommended replacement screws to preserve repeatable clamping forces and positional accuracy. Productivity and shopfloor benefits Applied in medium‑duty turning, this indexable insert improves process economy by combining a reliable grade with a geometry that reduces rework and extends intervals between tool changes. Shops benefit from fewer setup interventions and more predictable cycle times. For further technical data, application advice or to verify suitability for a specific stainless steel grade or machining parameter, the Metav Werkzeuge technical team is available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Contact Metav Werkzeuge for tailored application advice on the DNMG 110408 AH6225 insert and to request batch availability or technical parameter sheets Technical data Article number: 6966146 SKU: 6966146-Tungaloy Manufacturer SKU: TUN6966146 Manufacturer: Tungaloy Facts Insert angle: 55° Size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Special features Grade/coating: AH6225 (PVD-coated carbide) Shape: Rhombic, DNMG form Chipbreaker: Double-sided Hole: Cylindrical, with hole Application: Turning ISO series: ISO-Drehwendeschneidplatten FAQ What materials is this insert suitable for? The DNMG 110408 AH6225 insert is optimised for machining stainless steels and is intended for medium cutting conditions where good chip control and surface finish are required. How does the AH6225 grade affect tool life and surface quality? The AH6225 PVD-coated carbide grade provides a sharp yet stable cutting edge that balances wear resistance with edge strength, improving tool life and often producing better surface quality in the machined component. Which toolholders are compatible with this insert? Compatibility is determined by ISO form, size, relief angle and thickness; the DNMG form and standard dimensions enable use in holders designed for DNMG110408 inserts when the holder accepts the specified plate size and fastening method. Is the insert reversible or single‑use? This is a double-sided indexable insert, which allows flipping to a fresh cutting edge once one side is worn, effectively doubling the usable cutting edges per insert. What is the manufacturer article number and brand? This is a Tungaloy indexable insert with manufacturer article number 6966146 and manufacturer SKU TUN6966146. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a universally applicable PVD-coated carbide grade, precise ISO DNMG geometry and a 0.8 mm corner radius for stable, repeatable stainless-steel turning; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. DNMG 110408 AH6225 – ISO rhomboid turning insert for stainless steels by Tungaloy The DNMG110408 AH6225 is an ISO rhomboid turning insert designed for external and internal turning of stainless steels, offering a sharp yet stable cutting edge for medium machining and varying operating conditions. PVD-coated carbide grade AH6225 Universal for stainless steel machining 0.8 mm corner radius for versatile profiles Double-sided chipbreaker, cylindrical hole Consistent cutting performance with PVD-coated carbide The insert combines a PVD-coated carbide substrate with the AH6225 grade to achieve a balance between a sharp cutting edge and robust edge stability. This results in predictable tool life during medium-duty turning of stainless steels and helps to maintain surface finish over longer production runs. The coating reduces built-up edge and improves resistance to temperature-related wear, which supports higher process reliability and fewer interruptions for tool changes. Designed for simple holder compatibility and secure clamping Compatibility is determined by form, relief angle, tolerance class, fixation, size and thickness; the DNMG form and ISO dimensions ensure straightforward matching to standard holders and boring bars. The insert’s cylindrical hole and available screw clamping arrangements provide secure fixation, while the rhomboid geometry permits reversible indexing for efficient use of cutting edges. The 0° clearance angle and 0.8 mm corner radius offer a predictable cutting geometry that eases setup and repeatable positioning in ISO-compatible tool systems. Application advantages: productivity and chip control Equipped with a double-sided chipbreaker, this insert manages chip formation effectively under the specified conditions, reducing the risk of entanglement and improving evacuation in both external and internal turning. The universal nature of the grade allows operators to select this insert when machining a range of stainless steels in medium cutting regimes, simplifying tool inventory and supporting faster changeovers. Overall, the combination of geometry, grade and coating promotes steady productivity and consistent surface quality. Contact Metav Werkzeuge to discuss application parameters or to purchase the DNMG 110408 AH6225 insert; technical consultants are available to advise on holder compatibility and optimal cutting data Technical data Article number: 6947223 Manufacturer article number: 6947223 SKU: 6947223-Tungaloy Manufacturer SKU: TUN6947223 Model series: ISO-Drehwendeschneidplatten Material: Carbide Coating: PVD Facts Corner radius: 0.8 mm Thickness: 4.76 mm Size: 11 mm Relief/clearance angle: 0° WPL ISO code: 110408 Special features ISO rhomboid insert (DNMG) Grade: AH6225, universal for stainless steels Double-sided chipbreaker Cylindrical hole, with hole Rhombic plate form Suitable for external and internal turning PVD-coated carbide for improved wear resistance Manufacturer: Tungaloy FAQ What materials is this insert intended for? The DNMG 110408 AH6225 insert is formulated for machining stainless steels and performs well in medium cutting conditions common to that material group. Will this insert fit standard DNMG holders? Yes. The insert follows ISO DNMG geometry and is compatible with holders that match form, size, thickness and clamping style for DNMG inserts. How does the double-sided chipbreaker help in production? The double-sided chipbreaker on the insert promotes controlled chip formation and safer evacuation, which enhances process stability during external and internal turning. What are the key mounting characteristics to check before use? Verify holder compatibility for form, tolerance, fastening arrangement and that the 4.76 mm thickness and 11 mm size match the toolholder specification for secure clamping. Is the insert reversible to extend edge usage? Yes; the rhomboid DNMG form and double-sided geometry allow indexing to additional cutting edges, improving economical use of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO-standard geometry, a PVD-coated AH6225 carbide grade and a double-sided design for consistent stainless steel turning and reduced tooling costs; order genuine Tungaloy inserts or consult Metav Werkzeuge for application support. DNMG110408 AH6225 — ISO turning insert for medium-duty turning, Tungaloy The DNMG110408 AH6225 is an ISO-standard rhombic turning insert engineered for reliable machining of stainless steel in medium-duty external and internal turning applications. PVD-coated carbide grade AH6225 Optimised for stainless steel machining Rhombic DNMG shape with 55° cutting angle Double-sided chipbreaker, cylindrical hole High performance and consistent cutting edge for stainless steel turning The combination of a PVD-coated surface and the AH6225 grade carbide delivers a cutting geometry that balances sharpness and edge stability. This blend is designed specifically for stainless steel work, where adhesion and built-up edge can impede productivity; the coating improves wear resistance and reduces friction, while the substrate maintains toughness under variable cutting conditions. The result is a predictable tool life and repeatable part quality, which supports higher process reliability and fewer unplanned interruptions. Seamless integration into ISO tool systems for quick changeovers The insert follows ISO norms for form, tolerance and fastening, which simplifies selection and replacement in standard holders and boring bars. Its rhombic shape with a 55° cutting angle and a cylindrical hole supports secure clamping and accurate positioning; the double-sided chipbreaker allows indexable use, halving the number of inserts carried in stock for a given production run. The specified corner radius 0.8 mm provides a controlled edge for medium feeds, and the 0° clearance characteristic suits neutral to slightly positive tool geometries, aiding versatility across turning set-ups. Practical machining benefits and economical throughput Designed for medium-duty operations, this insert supports both external and internal turning where varied cutting conditions are encountered. The PVD-coated carbide substrate helps to sustain cutting performance under thermal and mechanical stress, leading to fewer insert changes and lower overall tooling costs. For shops seeking steady surface finish and cycle-time stability, the insert offers a straightforward way to increase throughput without complex process adjustments. For specific material batches or unusual geometries, technical consultation is recommended to match chipbreaker style and cutting parameters to the workpiece. Contact Metav Werkzeuge for tailored application advice on the Tungaloy DNMG110408 AH6225 insert and to secure original inserts with SKU TUN6947168 via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947168 SKU: 6947168-Tungaloy Manufacturer SKU: TUN6947168 Core data Model series: ISO-Drehwendeschneidplatten ISO designation: DNMG110408 Material: carbide Coating: PVD Grade: AH6225 Special features Shape: rhombic Cutting angle: 55° Corner radius: 0.8 mm Clearance angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Application: turning FAQ What materials is this insert suitable for? The DNMG110408 AH6225 insert is formulated primarily for stainless steel machining; the AH6225 grade provides a balance of sharpness and edge stability for medium cutting tasks. Is the insert reversible or single-use? The insert features a double-sided chipbreaker and a rhombic form, enabling reversible indexing to use multiple edges before disposal. Which holder types are compatible with this ISO insert? Compatibility depends on holder form, free clearance, tolerance class, fastening method, size and thickness; ISO-standard holders designed for DNMG inserts will accept this geometry. Does the PVD coating require special cutting fluids? The PVD-coated AH6225 insert benefits from common coolant and lubrication strategies used in stainless steel turning; specific coolant choice should align with material and process conditions. How is the corner radius stated and what does it mean for feeds? The corner radius is 0.8 mm; a larger radius provides stronger edges and improved surface finish at medium feeds, while influencing recommended feed rates and depth of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, stable cutting edge and proven PVD coating for reliable medium turning of rostfreier Stahl; ideal for shops seeking consistent productivity and easy indexing. Order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG110408 AH6225 ISO turning insert for rostfreier Stahl by Tungaloy — 55° rhombic, PVD-coated carbide The DNMG110408 AH6225 is a rhombic ISO turning insert designed for external and internal turning operations, offering a balanced cutting edge for medium machining tasks in rostfreier Stahl. PVD-coated AH6225 carbide grade Designed for rostfreier Stahl machining 55° rhombic geometry, 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole High-performance grade for consistent rostfreier Stahl machining The combination of a PVD-coated surface and the AH6225 carbide formulation delivers a sharp yet stable cutting edge that tolerates variable cutting conditions. This grade is engineered specifically for rostfreier Stahl, where workhardening and built-up edge can impair productivity. The coating reduces friction and improves wear resistance, while the substrate maintains toughness; together these properties help to extend tool life and maintain component quality during medium turning cycles. For production environments that demand repeatable results, this balance between hardness and edge stability supports sustained throughput and fewer insert changes. Geometry and mounting that simplify setup and repeatability A 55° rhombic shape with a corner radius of 0.8 mm and a clearance angle of 0° gives a reliable compromise between strength and insert versatility. The insert is supplied with a cylindrical hole for positive clamping and stable seating in compatible holders. The double-sided chipbreaker provides two indexable cutting edges per side, maximising tool life and reducing tooling costs. Because compatibility to the holder depends on form, clearance, tolerance class, attachment and thickness, the ISO designation and clear geometric data make it straightforward to select a matching external holder or boring bar for fast, secure fitting. Practical system integration for efficient workshop use As part of an ISO turning insert system, the plate works within a familiar assembly: insert, suitable external holder or boring bar, support/locking kit and replacement screws. The standardised format enables quick indexing and minimal downtime when a new cutting edge is required. The PVD-coated carbide resists thermal and abrasive wear, which supports higher material removal rates when machining rostfreier Stahl under stable cutting conditions. Clear labelling and the ISO series designation aid stock management and make it simpler to match replacements across machines and operations. When this grade and geometry are the right choice Choose this insert where medium turning of rostfreier Stahl requires a reliable edge and good surface finish without over-specifying to exotic grades. It is suited to shops refining process stability, where a productive cutting edge and consistent chip control are priorities. The insert’s features support a broad range of component work: external facing, contour turning and internal operations with a compatible boring bar. For those seeking an economical balance of performance and durability, the AH6225 grade offers straightforward handling and predictable wear behaviour. For application-specific advice on Tungaloy inserts and to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical team can advise on feed, speed and clamping to optimise productivity. Technical Data Manufacturer article number: 6947202 Manufacturer SKU: TUN6947202 Metav SKU: 6947202-Tungaloy Facts Geometry angle: 55° Corner radius: 0.8 mm Plate size: 11 mm Clearance angle: 0° Special features Grade/coating: AH6225, PVD-coated carbide Plate form: Rhombic, with cylindrical hole Chipbreaker: Double-sided Series: ISO turning inserts FAQ What materials is this insert suitable for? The DNMG110408 AH6225 insert is designed primarily for rostfreier Stahl; the AH6225 grade and PVD coating improve wear resistance and edge stability when machining such materials. How many usable edges does the insert provide? With a double-sided chipbreaker and standard indexing, the insert offers multiple cutting edges per index; the exact count depends on how the insert is mounted and indexed in the holder. Which holder features are required for correct compatibility? Compatibility is determined by the insert form, clearance angle, tolerance class, attachment method, size and thickness; select an ISO-compatible external holder or boring bar with a suitable clamp and screw for secure seating. What are the main advantages of the AH6225 grade? AH6225 provides a balanced performance for rostfreier Stahl with a combination of a sharp cutting edge and sufficient toughness, supported by a PVD coating that reduces friction and enhances wear resistance. Is the insert suitable for both external and internal turning? Yes — the insert is specified for both external and internal turning operations when paired with an appropriate holder or boring bar and correct cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the proven combination of PVD-coated carbide and a sharp but stable cutting edge for consistent mid-range turning of stainless steels; the ISO compatibility and double-sided chipbreaker minimise downtime and simplify tool inventory. Order the DNMG110408 AH6225 directly via Metav Werkzeuge or consult our specialists for application advice. DNMG110408 AH6225 Turning insert for turning by Tungaloy — PVD-coated carbide, 55° rhombic DNMG110408 AH6225 is an ISO-standard turning insert engineered for general-purpose external and internal turning, offering reliable performance when machining stainless steels under varying conditions. ISO-standard rhombic insert, 55° geometry PVD-coated carbide for improved edge life Double-sided chipbreaker for controlled chips Cylindrical hole for secure clamping Consistent performance for mid-range stainless-steel turning The insert delivers a balanced solution for shops seeking dependable results without excessive tool complexity. The PVD-coated carbide composition provides enhanced wear resistance while maintaining a sharp, stable cutting edge, which translates into consistent surface finish and longer intervals between indexings. The rhombic 55° geometry with a 0° clearance and 0.8 mm corner radius supports versatile turning strategies, making the insert suitable for both light finishing and more robust cuts in stainless steel. This combination reduces the need for frequent tool changes and helps sustain a steady production flow. Ease of integration and reliable clamping for production lines Compatibility with holders is assured by ISO standardisation: form, clearance angle, tolerance class, fixing method, size and thickness determine fit. The insert’s cylindrical hole and standard dimensions (11 mm size, 4.76 mm thickness) enable straightforward mounting in matched external holders or boring bars, simplifying inventory management. The double-sided chipbreaker promotes predictable chip formation, lowering the risk of built-up edge and reducing cycle-time variability. As a result, machinists can maintain shorter setup times and higher process stability across mixed-batch production. Economic machining and adaptable tool life Designed as a universal grade for stainless steels, the AH6225 formulation is tuned for sharpness under fluctuating conditions, delivering good wear resistance without sacrificing edge integrity. The insert’s reversible, indexable design provides two usable cutting edges per side, improving cost-efficiency per component. In practice, this means fewer changeovers and lower tooling costs for medium-duty turning applications. The product supports a pragmatic balance between cutting performance and tool life, helping workshops achieve predictable outputs and simplified tool selection. For reliable stainless-steel turning with Tungaloy quality, choose the AH6225 grade DNMG110408 insert and contact Metav Werkzeuge for stock availability and tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947110 Manufacturer SKU: TUN6947110 SKU: 6947110-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: AH6225, PVD-coated Manufacturer: Tungaloy Facts Geometry: DNMG110408 (55° rhombic) Corner radius: 0.8 mm Thickness: 4.76 mm Size: 11 Clearance angle: 0° Hole: with cylindrical hole Special features Double-sided chipbreaker ISO-standard insert for turning Suitable for stainless steels Rhombic plate form Compatible with standard holders and clamping sets FAQ What materials is this insert suited for? The DNMG110408 AH6225 insert is formulated primarily for machining stainless steels and offers a balance of sharpness and wear resistance suitable for varying cutting conditions. How does the chipbreaker affect machining? The double-sided chipbreaker on the DNMG110408 promotes controlled chip formation, improving surface finish and reducing the likelihood of built-up edge during turning operations. Is this insert reversible and how many cutting edges are available? The indexable DNMG design provides multiple usable cutting edges through reversing and indexing, which increases cost-efficiency and reduces tool changes. Which holders are compatible with this insert? Compatibility is determined by ISO geometry — form, clearance angle, tolerance class, fixing method, size and thickness — so standard DNMG holders and boring bars with matching specifications are suitable. Can the insert be used for both external and internal turning? Yes, the insert is designed for external and internal turning tasks; selection of the correct holder and cutting parameters is recommended for optimal results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade and a sharp, stable cutting edge for consistent stainless steel turning. The ISO rhombic design and cylindrical hole ensure straightforward clamping and fast tool changes. Order the DNMG110408 AH6225 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG110408 AH6225 turning insert — PVD-coated carbide for stainless steel turning (Tungaloy) The DNMG110408 AH6225 Tungaloy insert is an ISO rhombic indexable insert designed for external and internal turning where a sharp, stable edge and reliable chip control are required. PVD-coated carbide AH6225 Optimised for stainless steel machining 55° rhombic DNMG110408 geometry Double-sided chipbreaker, 0.8 mm radius Reliable cutting performance for stainless steels The combination of a PVD-coated surface and the AH6225 carbide grade delivers a balance of edge sharpness and toughness that suits changing conditions in stainless steel turning. The coating reduces built-up edge and improves consistency at medium cutting depths, while the substrate material maintains a stable cutting edge under interrupted or variable feed conditions. This results in predictable component quality and fewer tool changes during batch production, supporting higher uptime and stable cycle times. Precise ISO geometry for secure clamping and quick indexability Built to ISO standards, the DNMG110408 geometry with a 55° rhombic shape and a cylindrical hole simplifies holder compatibility and repeatable seating. The standardised form, clearance angle of 0° and the defined tolerance class reduce setup variation and make replacement straightforward in modular tool systems. As a result, tool changeovers are faster and reproducibility between stations is improved, which benefits process reliability in job-shop and production environments. Effective chip control and consistent surface finish The double-sided chipbreaker is matched to mid-range turning and offers controlled chip formation when paired with the right feeds and speeds. The 0.8 mm corner radius balances edge strength and surface quality, helping to reduce chatter and deliver a consistent finish on ferritic and austenitic stainless steels. Combined, these features support a repeatable machining process with lower scrap rates and improved first-pass yield. Practical application and integration into workflows Suitable for both external and internal turning, the insert integrates easily into existing tooling systems. Selection of the appropriate chipbreaker and clamping arrangement should be based on component geometry and machine stability. Spare part stocking is simplified by the ISO reference and the manufacturer SKU, facilitating rapid replenishment and minimal production interruptions. For tailored cutting data and feed-speed recommendations, technical consultation is available to align the insert’s strengths with specific production goals. Contact Metav Werkzeuge for tailored cutting data and to order the Tungaloy DNMG110408 AH6225 insert; our specialists are available to advise on holder compatibility and machining strategies, and can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947133 SKU: 6947133-Tungaloy Manufacturer SKU: TUN6947133 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Key figures Size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 55° Clearance angle: 0° Features and applications ISO rhombic DNMG110408 form PVD-coated carbide grade AH6225 Double-sided chipbreaker Cylindrical hole for secure clamping Suitable for external and internal turning Optimised for machining stainless steels Compatible with standard ISO toolholders Intended for medium machining under variable conditions FAQ Is this insert suitable for stainless steel turning? The DNMG110408 AH6225 Tungaloy insert is formulated specifically for stainless steels, with the AH6225 grade and PVD coating offering improved edge stability and reduced built-up edge during such operations. What holder features are required for compatibility? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness; the ISO DNMG110408 designation ensures fit with matching DNMG holders when these parameters correspond. Which machining tasks is this grade intended for? This insert is intended for external and internal turning at medium cutting depths where a sharp yet robust cutting edge is needed, particularly in applications with varying cutting conditions. How does the chipbreaker affect performance? The double-sided chipbreaker promotes predictable chip formation for mid-range turning, aiding surface finish and evacuation when cutting stainless steels under the recommended feeds and speeds. What are the key identification details for ordering? Order using the article number 6947133, SKU 6947133-Tungaloy, or the Tungaloy manufacturer SKU TUN6947133 to ensure the correct DNMG110408 AH6225 insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade designed for interrupted cuts, a rhombic DNMG110408 shape with a 0.8 mm corner radius, and a secure, cylindrical-hole fixing for consistent tool changes; order directly via Metav Werkzeuge or consult our team for application-specific recommendations. DNMG 110408 AH6235 turning insert for Drehen – Tungaloy DNMG110408 AH6235 is an ISO-standard turning insert for external and internal turning, engineered for reliable performance in demanding materials and interrupted cuts. PVD-coated carbide AH6235 for tough materials Double-sided chipbreaker for stable machining Rhombic form with 0.8 mm corner radius 0° relief angle with cylindrical hole fixing Consistent cutting performance for rostfreier Stahl and difficult alloys The PVD-coated carbide composition and the AH6235 grade deliver improved toughness for operations that involve interrupted cuts or increased breakout risk. This behaviour reduces the frequency of edge breakage and extends effective tool life under variable loads. The result is a more predictable machining cycle and fewer unscheduled tool changes when machining rostfreier Stahl or similarly demanding alloys. The insert’s geometry supports controlled chip formation and helps maintain surface integrity, which is particularly important for components where finish and dimensional stability are critical. Fast changeover and reliable clamping for productive turning Compatibility with the toolholder depends on shape, relief angle, tolerance class, fastening method, size and thickness; the DNMG format is widely accepted across ISO holders, enabling straightforward replacement during set-up. The cylindrical hole and standard fixing position simplify clamp engagement and reduce run-out risk. For production environments this translates into shorter machine downtime and quicker tool swaps. The rhombic outline combined with a double-sided chipbreaker permits two usable edges per index, contributing to lower tooling costs and improved process continuity. Geometry and clearance tailored to stable machining A 0° relief angle and a 55° approach geometry ensure secure cutting engagement with conservative clearance to assist in intermittent cutting conditions. The 0.8 mm corner radius balances edge strength and the ability to produce acceptable surface finishes without excessive cutting forces. These geometric choices help to avoid chatter and support consistent chip evacuation when paired with appropriate feeds and speeds. For less experienced planners, the combination of these parameters provides a reliable starting point for process optimisation in turning operations. Material and coating benefits for wider material coverage The insert is manufactured from cemented carbide and finished with a PVD layer selected to enhance edge stability and wear resistance under variable thermal loads. The AH6235 grade is specifically tuned for tougher cutting conditions and offers a broader material coverage than standard high-hardness grades, meaning fewer grade changes when alternating between different steels and alloys. Where process security and repeatability are priorities, this composition supports longer intervals between inspection or replacement while maintaining dimensional accuracy. Contact Metav Werkzeuge for tailored recommendations on Tungaloy AH6235 DNMG110408 inserts and secure the optimal insert selection for demanding turning tasks of rostfreier Stahl and related materials Technical data Article number: 6903370 SKU: 6903370-Tungaloy Manufacturer SKU: TUN6903370 Model series: ISO-Drehwendeschneidplatten Designation: DNMG110408 AH6235 Tungaloy-Wendeplatte Facts Size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Special features Grade: AH6235 Material: carbide Coating: PVD-coated carbide Chipbreaker: double-sided Shape: rhombic Hole: with cylindrical hole Intended use: Drehen FAQ Which materials is this insert suited for? The DNMG110408 AH6235 insert is designed primarily for rostfreier Stahl and materials prone to work-hardening or intermittent cutting, offering improved edge stability in such conditions. How is the insert secured in the holder? The insert uses a cylindrical hole fixing; compatibility with a holder is determined by shape, relief angle, tolerance class, fastening type, size and thickness to ensure accurate seating and minimal run-out. What advantage does the AH6235 grade provide? AH6235, a PVD-coated carbide grade from Tungaloy, provides enhanced toughness and chip control for interrupted cuts and applications with higher breakout risk, extending usable edge life. Can the insert be used for internal as well as external turning? Yes, the ISO DNMG format is suitable for both external and internal turning when matched with an appropriate holder and machining parameters. Is the chipbreaker single-use or reversible? The insert features a double-sided chipbreaker, allowing both edges to be used; this supports economical tool usage and quicker index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced combination of PVD-coated AH8015 wear resistance and 0.8 mm corner radius for consistent part geometry and prolonged indexing life; ISO compatibility ensures straightforward integration into existing tool systems. Order the DNMG110408 AH8015 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG110408 AH8015 Tungaloy turning insert — ISO rhombic 55°, double-sided chipbreaker DNMG110408 AH8015 Tungaloy turning insert is an ISO‑standard indexable insert designed for general turning of heat‑resistant alloys and similar materials, offering a practical balance of edge stability and wear resistance in demanding machining tasks. PVD‑coated carbide grade AH8015 ISO rhombic insert, 55° included angle 0.8 mm corner radius for consistent profiles Double‑sided chipbreaker with cylindrical hole Reliable general‑purpose performance for heat‑resistant alloys The PVD coating on the AH8015 grade provides a controlled wear profile that suits the general machining of heat‑resistant alloys and other demanding materials. As a carbide indexable insert, it combines wear resistance with reliable edge stability, which reduces the frequency of tool changes and helps maintain part tolerances over extended production runs. The coating and substrate interaction supports steady cutting conditions and a consistent surface finish, translating into predictable cycle times and lower rework rates. Secure mounting and ISO compatibility for straightforward tool setups ISO standardisation of the insert format guarantees compatibility with a wide range of holders, but secure use depends on matching the insert’s shape, free angle, tolerance class, attachment method, size and thickness with the chosen toolholder. The rhombic form and cylindrical hole allow positive clamping in many external holders or boring bars, while the 55° included angle supports versatile approach angles for both external and internal turning. Clear guidance on holder selection reduces setup time and ensures process stability across different machines. Productivity benefits from geometry and chip control The 0.8 mm corner radius delivers a balance between strength at the cutting edge and the ability to achieve close tolerances; it supports moderate feed rates while limiting chatter on less rigid setups. The double‑sided chipbreaker increases usable index counts and helps control chip formation during longer cuts, contributing to improved throughput. Together, these features make the insert suitable for batch production and order‑based machining where consistent component quality and predictable tool life are priorities. Contact Metav Werkzeuge for original Tungaloy AH8015 inserts and tailored machining advice on optimising turning operations Technical data Article number: 6947169 SKU: 6947169-Tungaloy Manufacturer SKU: TUN6947169 Series: ISO turning indexable inserts Core data ISO designation: 110408 Size: 11 mm Included angle: 55° Corner radius: 0.8 mm Relief angle: 0° Form: rhombic Special features Grade: AH8015 Coating: PVD Material: carbide Chipbreaker: double‑sided Hole: with hole (cylindrical hole) Application: turning Compatibility: depends on form, free angle, tolerance class, attachment, size and thickness FAQ What materials is this insert best suited for? The DNMG110408 AH8015 Tungaloy turning insert is specified for general machining of heat‑resistant alloys and provides a balanced performance for a wide range of steels and alloys. How does the AH8015 grade affect tool life? AH8015, together with the PVD coating, offers a compromise between wear resistance and edge stability that typically extends usable index life compared with uncoated grades. Can this insert be used in internal turning? Yes — with an appropriate ISO‑compatible boring bar or internal holder that matches the insert’s 55° geometry and mounting requirements, the insert is suitable for internal turning. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius helps maintain edge strength and supports consistent surface finish while allowing moderate feeds; it is a practical choice for mixed production demands. Is the insert reversible and how many cutting edges are available? The double‑sided chipbreaker and indexable rhombic design provide multiple usable edges; the exact count depends on how the insert is indexed during use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 carbide for balanced wear resistance and edge stability and a rhombic 55° geometry for versatile turning operations; order directly via Metav Werkzeuge or request advice from our consultants. DNMG110408 AH8015 DNMG turning insert for Turning by Tungaloy A DNMG110408 AH8015 turning insert engineered for external and internal turning of heat-resistant alloys, offering a balanced mix of wear resistance and cutting-edge stability for general machining. PVD-coated carbide AH8015 55° rhombic geometry Double-sided chipbreaker design Cylindrical hole for secure clamping Consistent performance on heat-resistant alloys The PVD-coated carbide grade AH8015 is specified for the general machining of heat-resistant alloys and delivers a balance between wear resistance and cutting-edge stability. The thin PVD layer increases resistance to thermal softening and abrasive wear while preserving a sharp edge, which leads to longer intervals between indexings and reduced insert consumption. For production environments seeking steady tool life and predictable maintenance cycles, this behaviour translates directly into more consistent part quality and lower overall operating costs. Secure clamping and standardised fit for fast tool changes The insert’s rhombic geometry with a 55° included angle and a cylindrical hole ensures reliable seating in ISO-compatible holders. Compatibility to the clamping system is determined by form, clearance angle, tolerance class, fixing method, size and thickness; choosing the correct holder and shim set is essential for repeatable results. The 0.8 mm corner radius provides a compromise between strength and surface finish, making the insert suitable for a wide range of turning tasks while simplifying inventory by adhering to ISO standards. Improved chip control and productivity in turning operations A double-sided chipbreaker delivers effective chip control for both external and internal turning when matched to the workpiece material and machining conditions. Controlled chip formation reduces the risk of re-cutting and surface blemishes and supports uninterrupted automated cycles. As part of an ISO insert system—insert, holder, shim and clamping set—this solution promotes quick insert changes, predictable process behaviour and a measurable uplift in throughput, particularly when machining demanding alloys where stability and repeatability are decisive. For tailored recommendations or to secure stock of Tungaloy DNMG110408 AH8015 inserts, contact Metav Werkzeuge for application advice and order handling: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966173 Manufacturer SKU: TUN6966173 SKU: 6966173-Tungaloy Model series: ISO indexable turning inserts Facts Corner radius: 0.8 mm Included angle: 55° Plate thickness: 4.76 mm Plate size: 11 mm Clearance angle: 0° Special features Rhombic plate geometry Cylindrical hole Double-sided chipbreaker PVD-coated carbide, grade AH8015 Use: Turning FAQ What materials is this insert best suited for? The DNMG110408 AH8015 insert with PVD-coated carbide is intended primarily for the general machining of heat-resistant alloys and provides a good balance between wear resistance and edge stability. How does the 55° geometry affect cutting performance? A 55° rhombic geometry offers a good compromise between strength and accessibility for external and internal turning; the geometry combined with the 0.8 mm corner radius helps achieve stable cutting and consistent surface finish with the DNMG110408 AH8015 insert. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and the fit depends on form, clearance angle, tolerance class, fixing and thickness; ensure the chosen holder matches these parameters for secure clamping of the DNMG110408 AH8015. What benefit does the double-sided chipbreaker provide? The double-sided chipbreaker improves chip control across a range of cutting conditions, reducing the risk of re-cutting and enabling longer continuous cycles when using the DNMG110408 AH8015 insert. Which components complete the cutting system for this insert? A complete system comprises the indexable insert, a matching external holder or boring bar, a shim/underlay and clamping screws; correct assembly ensures the process reliability expected from the DNMG110408 AH8015 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide and ISO compatibility for consistent machining of heat‑resistant alloys; the robust geometry and secure clamping reduce tool changes and support uninterrupted production. Order directly via Metav Werkzeuge or contact their consultants for application guidance. DNMG110408 AH8015 Tungaloy turning insert — PVD-coated cemented carbide, 0.8 mm radius A DNMG110408 AH8015 indexable insert designed for ISO‑standard external and internal turning of heat‑resistant alloys and general turning applications. ISO-standard rhombic insert DNMG110408 PVD-coated cemented carbide AH8015 0.8 mm corner radius for edge strength Double-sided chipbreaker, cylindrical hole Consistent wear performance for demanding alloys The PVD-coated cemented carbide composition in grade AH8015 offers a balance between wear resistance and edge stability, making the insert suitable for machining heat‑resistant alloys under varied cutting conditions. As an ISO-standard component, the insert ensures predictable interchangeability with compatible holders; this standardisation reduces setup time and helps maintain a steady production flow. The coating acts as a thermal barrier and improves adhesion, which translates into longer effective cutting life and fewer interruptions in process chains. Geometry engineered for reliable cutting and secure clamping The rhombic form with an included angle of 55° and a corner radius of 0.8 mm delivers a compromise between cutting strength and surface finish. A larger radius improves the toughness of the cutting edge and resists chipping, while the geometry still permits precise contour turning. The 0° clearance angle requires appropriate rigidity in the tool assembly, and the cylindrical hole combined with a secure clamping system yields stable fixation and repeatable positioning. The double-sided chipbreaker supports effective chip control and allows indexation to extend service intervals. Productivity benefits and economical machining Choosing the AH8015 grade gives a pragmatic trade‑off: enough hardness to resist abrasive wear with sufficient edge toughness for interrupted cuts. The insert’s PVD coating helps at elevated temperatures, improving performance in continuous, high‑temperature turning operations. Reduced wear and reliable edge behaviour lower downtime for insert changes and regrinds, which contributes to improved uptime and cost‑efficiency per machined component. The overall system — insert, suitable holder or boring bar, and proper clamping — is optimised for productive metal removal and consistent results. Practical guidance for selection and system compatibility Compatibility with a chosen holder depends on form, free angle, tolerance class, fixing method, size and thickness; ensure the seat and screw arrangement match the insert’s tolerance class and hole style. System components include the indexable insert, an appropriate external holder or boring bar, a support pad or clamp set and replacement screws. Select the chipbreaker and grade based on the workpiece material and machining stability: for less rigid set‑ups or interrupted cuts, favour edge strength; for continuous finishing passes, consider geometries that support improved surface quality and chip evacuation. Contact Metav Werkzeuge for application advice and to request a quotation for the Tungaloy DNMG110408 AH8015 indexable insert — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6947086 Manufacturer SKU: TUN6947086 SKU: 6947086-Tungaloy Designation: DNMG110408 AH8015 Manufacturer: Tungaloy Series: ISO turning inserts Numbers / Core technical data Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 mm Clearance angle: 0° Insert angle: 55° Manufacturer article number: 6947086 Designs / Special features PVD-coated cemented carbide (AH8015) Rhombic plate form Cylindrical hole for secure clamping Double-sided chipbreaker ISO-compatible geometry Application: turning FAQ What materials is this insert suitable for? The Tungaloy DNMG110408 AH8015 insert is primarily specified for heat‑resistant alloys and similar difficult‑to‑machine materials; the AH8015 grade balances wear resistance and edge stability for general turning tasks. How does the PVD coating benefit machining performance? The PVD coating on the AH8015 grade increases thermal resistance and reduces adhesion at the cutting edge, which improves life under higher cutting temperatures and contributes to a more stable machining process with the DNMG110408 insert. What does the 0.8 mm corner radius affect in practice? A 0.8 mm corner radius enhances edge strength and resistance to chipping, offering a more robust cutting edge for semi‑roughing and interrupted cuts while still permitting acceptable surface finish for many turning operations. Is the insert compatible with standard holders? The ISO designation and format of the DNMG110408 make it compatible with holders that match its form, size, thickness and fixing arrangement; proper holder compatibility and clamping are essential for repeatable performance. What role does the double‑sided chipbreaker play? The double-sided chipbreaker supports reliable chip control and allows indexation to extend service life; it improves chip formation across a range of cutting conditions, reducing the need for frequent interventions. Which system components are required for mounting? A complete system includes the indexable insert, a matching external holder or boring bar, a support pad or clamp set and replacement screws; correct assembly ensures positional accuracy and process stability with the DNMG110408 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 AH8015 Wendeplatten - Tungaloy
The combination of PVD-coated AH8015 carbide and a rhombic 55° geometry delivers a reliable balance of wear resistance and cutting-edge stability for general turning of heat‑resistant alloys. Compatible with ISO holders that match form, clearance and fastening specifications, this insert supports predictable chip control and consistent surface quality — order through Metav Werkzeuge or consult the team for application guidance. DNMG110408 AH8015 indexable turning insert — Tungaloy, PVD-coated carbide, rhombic 55° DNMG110408 AH8015 is an ISO‑standard rhombic indexable insert designed for general external and internal turning of heat‑resistant alloys and similar demanding materials ISO rhombic 55° geometry for versatile turning PVD-coated carbide AH8015 for heat‑resistant alloys Double‑sided design with cylindrical hole for secure clamping 0.8 mm corner radius for balanced edge strength and finish Proven performance for general turning with heat‑resistant alloys The PVD‑coated carbide grade AH8015 is specified for balanced performance when machining heat‑resistant alloys, offering a compromise between wear resistance and cutting edge stability. This grade is suitable where a stable cutting edge is required across a range of alloys; PVD coating enhances surface hardness and reduces built‑up edge, which in turn prolongs tool life and maintains consistent results. The rhombic geometry with a nominal 55° approach ensures adaptability between finishing and light roughing, helping to maintain good surface quality without sacrificing process reliability. Secure mounting and compatibility reduce setup uncertainty Compatibility with holders depends on form, clearance, tolerance class, fastening method, size and thickness; the rhombic DNMG110408 form with a cylindrical hole allows firm fixation in standard ISO clamping systems. The specified 0° clearance should be considered when selecting a matching external holder or boring bar, as it affects effective rake and contact conditions; appropriate holder geometry maintains cutting stability and prevents unwanted vibration. Clear reference to ISO standards simplifies selection and reduces the risk of incorrect pairing, supporting stable machining routines on production machines. Controlled chips and balanced edge geometry for reliable finishes A 0.8 mm corner radius provides a compromise between edge robustness and surface finish: larger radii extend edge life under interrupted cuts, while moderate radii support better surface quality. The insert’s double‑sided construction offers economical indexability, enabling rotation to a fresh edge when wear occurs. Combined with the insert’s designated chipbreaker style and the AH8015 grade, operators can expect predictable chip control and repeatable machining behaviour, which contributes to consistent component tolerances and reduced scrap rates. For Tungaloy PVD‑coated AH8015 inserts and application‑specific recommendations, contact Metav Werkzeuge for tailored advice and to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6793726 Manufacturer SKU: TUN6793726 SKU: 6793726-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts Geometry: rhombic, 55° Corner radius: 0.8 mm Size: 11 (reference) Clearance angle: 0° Hole: with cylindrical hole Chipbreaker: double‑sided Special features Grade/coating: AH8015, PVD‑coated Typical application: turning (external and internal) ISO‑standard insert compatible with matching holders Balanced wear resistance and edge stability for heat‑resistant alloys FAQ What materials is this insert intended for? The DNMG110408 AH8015 is aimed primarily at heat‑resistant alloys; the AH8015 grade provides balanced wear resistance and cutting edge stability for such materials. How does the PVD coating benefit machining? A PVD‑coated surface increases hardness and reduces friction, which improves wear resistance and helps maintain cutting performance over longer cycles with the Tungaloy insert. Does the insert require a specific holder type? Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness; the rhombic form with a cylindrical hole is compatible with standard ISO clamping systems when holder geometry matches. How is chip control achieved with this insert? The combination of the AH8015 grade, the insert geometry and the designated chipbreaker style results in predictable chip control suited to general turning operations. Is the insert indexable and economical to use? Yes, the insert is double‑sided, allowing rotation to fresh cutting edges and economical reuse until all edges are consumed. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced wear resistance and edge stability of the PVD‑coated AH8015 carbide grade combined with the robust 55° rhombic geometry and 0.8 mm corner radius for consistent turning performance; order directly via Metav Werkzeuge or consult the team for application support. DNMG 110408 AH8015 — DNMG indexable insert for turning by Tungaloy A DNMG110408 AH8015 carbide indexable insert for ISO‑standard turning, engineered for general machining of heat‑resistant alloys with a PVD‑coated cutting surface. PVD-coated carbide AH8015 55° rhombic insert geometry 0.8 mm corner radius Double-sided chipbreaker design Consistent cutting performance for heat‑resistant alloys The combination of PVD‑coated surface and carbide substrate in the AH8015 grade delivers an excellent balance between wear resistance and edge stability, making the insert especially suited to machining heat‑resistant alloys. The PVD layer reduces adhesion and thermal softening at the cutting edge, which translates into longer effective tool life and fewer interruptions for tool changes. For production environments that prioritise uptime and consistent component quality, this equates to a measurable improvement in process reliability and reduced tooling consumption over comparable uncoated grades. Predictable geometry and secure clamping for repeatable results Designed to ISO dimensions, the rhombic DNMG form with a 55° included angle and 0.8 mm corner radius ensures stable engagement and controllable chip formation in turning. The insert’s double‑sided configuration and cylindrical hole enable cost‑effective indexing and secure mounting with the appropriate holder, shim and clamp set. Compatibility with a given toolholder depends on form, clearance angle, tolerance class, clamping method, size and thickness; this standardised approach simplifies holder selection and guarantees repeatable seating and concentricity, which are essential for achieving consistent surface finish and dimensional accuracy in serial production. Efficient inventory and practical system integration for workshops Being an ISO‑standard indexable component, the insert integrates smoothly into a typical turning system comprising an insert, matching external holder or boring bar and associated shim and screw kit. The 4.76 mm thickness and 11 mm inscribed circle size provide robust support against cutting forces, while the double‑sided design reduces per‑edge cost and simplifies stock management. Choosing the correct chipbreaker and the AH8015 grade according to material and machining strategy allows small and medium workshops to maintain productivity and control tooling expenditure without sacrificing part quality. Application advice and selection guidance For external and internal turning operations, select the chipbreaker and grade to match the workpiece material and machining stability; the AH8015 grade is recommended as a first choice for many heat‑resistant alloys because it offers a compromise between toughness and hardness. When in doubt about holder compatibility, verify the insert form, 55° included angle, 0° relief angle and the plate thickness against the holder specification to ensure safe clamping and correct cutting geometry. This approach reduces set‑up time and supports predictable machining results across varying batch sizes. Contact Metav Werkzeuge today to discuss application‑specific grade selection, verify holder compatibility for the Tungaloy DNMG110408 AH8015 insert and arrange delivery or tailored advice Technical data Article number: 6788988 Manufacturer SKU: TUN6788988 Model series: ISO‑Drehwendeschneidplatten Product name: DNMG110408 AH8015 Tungaloy indexable insert Core specifications Thickness: 4.76 mm Inscribed circle / size: 11 mm Corner radius: 0.8 mm Included angle: 55° Clearance (relief) angle: 0° Hole: with cylindrical hole Special features PVD‑coated carbide (AH8015) Double‑sided chipbreaker Rhombic plate form ISO‑standard turning insert Suitable for turning heat‑resistant alloys Compatible with matching external holder, shim/clamp and screws FAQ Is this insert suitable for machining heat‑resistant alloys? Yes. The AH8015 PVD‑coated carbide grade is intended as a first choice for general machining of heat‑resistant alloys and balances wear resistance with edge stability for those materials. How is holder compatibility determined for this DNMG insert? Compatibility depends on the insert form, clearance (relief) angle, tolerance class, clamping method, size and thickness; confirm those parameters against the holder specification to ensure correct fit and secure clamping for the DNMG110408 insert. What are the key dimensions and geometry of the insert? The insert features an 11 mm inscribed circle, 4.76 mm thickness, 0.8 mm corner radius and a 55° included angle with a 0° clearance angle and a cylindrical hole for clamping. Is the insert indexable and economical to stock? Yes. The double‑sided design permits indexing both sides, which reduces cost per cutting edge and simplifies inventory management compared with single‑use cutters. Which machining operations is this insert intended for? The insert is designed for ISO‑standard external and internal turning operations; choose the appropriate chipbreaker and cutting parameters based on workpiece material and stability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 grade, a double-sided chipbreaker and robust rhombic geometry to maintain process stability and reduce tool changes; order the DNMG110408 AH8015 Tungaloy insert directly via Metav Werkzeuge or consult the company’s specialists for application matching. DNMG110408 AH8015 ISO turning insert for Turning by Tungaloy, PVD-coated carbide The DNMG110408 AH8015 is an ISO rhombic turning insert designed for external and internal turning of heat-resistant alloys, offering balanced wear resistance and cutting-edge stability. ISO rhombic insert DNMG110408 PVD-coated carbide grade AH8015 Double-sided chipbreaker for chip control 0.8 mm corner radius, 55° geometry Consistent machining and longer uptime The combination of PVD-coated surface and AH8015 grade carbide provides a reliable balance between wear resistance and edge stability, making the insert well suited to continuous production environments. The double-sided chipbreaker ensures predictable chip formation and improved evacuation during both finish and medium roughing passes, which reduces unplanned stoppages. Because the coating increases resistance to built-up edge and abrasion, tool life is extended and overall machining costs fall; this yields measurable efficiency gains on parts produced from heat-resistant alloys. Simple selection and secure clamping for ISO systems Being an ISO-standardised insert in a rhombic form, the DNMG geometry simplifies holder selection; compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness. The insert’s 0.8 mm corner radius and 4.76 mm thickness balance strength and rigidity for typical lathe set-ups, while the central cylindrical hole facilitates reliable locating and clamping in standard DNMG holders. For shops standardising on ISO turning systems, this reduces inventory complexity and streamlines tool changeovers without compromising process reliability. Targeted performance on heat-resistant alloys with improved surface quality The AH8015 grade was developed as a first choice for general machining of heat-resistant alloys: it is PVD-coated to withstand elevated cutting temperatures while maintaining a stable cutting edge. The 55° insert angle combined with a 0° clearance in certain seat orientations helps to control cutting forces and delivers a consistent surface finish when feeds and speeds are matched to material and rigidity. Users will notice fewer rework cycles and stable dimensional results in both external and internal turning operations, thanks to the insert’s geometry and chip control features. For precise application advice and availability of Tungaloy DNMG110408 AH8015 inserts, contact Metav Werkzeuge – info@metav-werkzeuge.com or +49 2822 7131930 – for tailored recommendations and fast delivery. Technical Data Article number: 6947134 SKU: 6947134-Tungaloy Manufacturer SKU: TUN6947134 Series: ISO turning inserts Designation: DNMG110408 AH8015 Facts Corner radius: 0.8 mm Thickness: 4.76 mm Size: 11 mm Insert angle: 55° Clearance angle: 0° With hole: yes (cylindrical) Special features Grade/coating: AH8015 (PVD-coated carbide) Shape: rhombic Chipbreaker: double-sided Hole style: cylindrical hole Material: carbide Application: turning (external and internal) Compatibility note: ISO-standardised; compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials are best machined with this insert? The DNMG110408 AH8015 Tungaloy insert is optimised for heat-resistant alloys; the AH8015 grade offers a balanced combination of wear resistance and cutting-edge stability for such materials. Is the insert indexable and reversible to extend life? Yes, the insert is double-sided and indexable; the DNMG110408 AH8015 design allows rotation to a fresh cutting edge, extending usable life and improving cost-efficiency. Which holders fit this insert? Holders designed for DNMG 110408 inserts are compatible, provided form, clearance angle, tolerance class, fastening, size and thickness match the insert specifications; always check holder seat geometry before mounting. What surface finish can be expected with the 0.8 mm radius? With a 0.8 mm corner radius and AH8015 grade, the insert provides a robust cutting edge and consistent surface finish when feed and speed are selected according to material and machine rigidity. How does the AH8015 coating influence performance? The PVD-coated AH8015 grade improves resistance to abrasion and built-up edge in heat-resistant alloys, delivering reproducible tool life and stable machining performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 grade, a 55° rhombic geometry and a 0.8 mm corner radius for consistent turning performance and predictable tool life; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. DNMG110408 AH8015 ISO turning insert, PVD-coated carbide by Tungaloy DNMG110408 AH8015 is an ISO rhombic turning insert engineered for general external and internal turning of heat-resistant alloys, offering balanced wear resistance and stable cutting-edge performance. ISO rhombic insert DNMG110408 PVD-coated carbide AH8015 Double-sided chipbreaker 0.8 mm corner radius, 55° cutting edge Reliable performance for heat-resistant alloys and daily production The PVD-coated AH8015 grade is formulated to deliver a balance between wear resistance and edge stability, which translates into steady machining results when tackling heat-resistant alloys. As a PVD-coated carbide insert, the cutting edge resists abrasive and adhesive wear more effectively than uncoated grades, reducing unscheduled tool changes and improving overall process efficiency. This stability supports consistent component quality and helps maintain cycle times across medium- to high-volume turning operations. Secure fit and defined geometry for repeatable results The ISO rhombic form with a 55° cutting edge and 0° clearance forms a predictable contact geometry that benefits both external and internal turning. The insert’s cylindrical hole and specified dimensions (plate size 11, thickness 4.76 mm) ensure compatibility with standard DIN/ISO holders when the holder is matched by form, tolerance class and fastening. The 0.8 mm corner radius provides a compromise between edge strength and surface finish, enabling reliable performance in semi-finish to finishing passes while maintaining acceptable tool life. Efficient chip control and process security in the workshop Built with a double-sided chipbreaker, the insert supports improved chip formation and evacuation across a range of feeds and material conditions, which reduces the risk of built-up edge and enhances surface quality. The combination of AH8015 grade and the chipbreaker geometry delivers process security, fewer interruptions for rework and a more predictable replacement schedule. For production environments seeking consistency, this configuration helps lower overall machining costs by increasing effective cutting time and reducing scrap. Contact Metav Werkzeuge for application-specific advice on the DNMG110408 AH8015 turning insert by Tungaloy or to request a customised cutting data recommendation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947224 Manufacturer SKU: TUN6947224 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Core data ISO designation: DNMG110408 Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Cutting edge angle: 55° Clearance angle: 0° Hole: with hole (cylindrical) Special features PVD-coated carbide, grade AH8015 Double-sided chipbreaker Rhombic plate shape Cylindrical hole for secure clamping ISO-standard indexable insert for turning Intended for external and internal turning Balanced wear resistance and edge stability FAQ What materials is this insert best suited for? The DNMG110408 AH8015 turning insert is specified for machining heat-resistant alloys and performs well in general-purpose applications where a compromise between wear resistance and edge strength is required. How does the double-sided chipbreaker affect machining? A double-sided chipbreaker on the Tungaloy indexable insert provides consistent chip control for a variety of feeds, improving evacuation and helping to maintain surface finish during both semi-finish and finishing passes. Which holder types are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s ISO rhombic form and cylindrical hole match standard DIN/ISO external and internal turning holders when these parameters are aligned. What cutting geometry should be selected for improved tool life? Using the DNMG110408 AH8015 with moderate feed and appropriate cutting speed for heat-resistant alloys, combined with the 0.8 mm corner radius and the PVD-coated carbide grade, helps to prolong tool life while maintaining surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide durability, a precise 0.8 mm corner radius and economical double‑sided indexing for consistent turning of heat‑resistant alloys; order directly via Metav Werkzeuge or request tailored advice from our consultants. DNMG 110408 AH8015 indexable insert for turning — Tungaloy, rhombic, ISO standard The DNMG110408 AH8015 is an ISO‑standard rhombic indexable insert engineered for external and internal turning of heat‑resistant alloys in general machining applications. PVD-coated carbide AH8015 for heat-resistant alloys Rhombic DNMG 110408 with 55° cutting angle 0.8 mm corner radius for precise finish Double-sided chipbreaker, with central hole Reliable wear resistance balanced with edge stability The insert is manufactured from carbide with a PVD coating in the AH8015 grade, offering a balanced combination of wear resistance and cutting‑edge stability for machining heat‑resistant alloys. This balance reduces the risk of premature flank wear while maintaining a robust cutting edge, which translates into longer periods between indexings and fewer unscheduled tool changes. For production environments seeking consistent cycle times, the PVD‑coated surface also helps preserve tool life under elevated thermal loads. Geometry and secure clamping for predictable results With a rhombic DNMG form and a 55° cutting angle, the insert provides a versatile geometry suited to a range of external and internal turning operations. The 0.8 mm corner radius supports improved surface finish and dimensional control on medium‑feed passes, while the central cylindrical hole enables positive clamping and accurate seat location in compatible holders. Plate dimensions such as 11 mm size and 4.76 mm thickness align with ISO norms, so compatibility with standard clamping systems is straightforward when form, clearance, tolerance class and fastening are matched. Chip control and economical indexing This grade is supplied with a double‑sided chipbreaker, allowing two usable cutting edges per index and cutting‑edge economy for high‑volume machining. The chipbreaker design supports stable chip formation when matched to the workpiece material and cutting conditions, lowering the likelihood of built‑up edge and improving surface quality. The dual‑edge configuration reduces tooling cost per part and simplifies inventory management for busy workshops. Practical guidance for application selection Designed for turning applications, the insert performs well when paired with a holder and cutting parameters chosen for heat‑resistant alloys; select the chipbreaker and grade to suit the workpiece, machining stability and feed rates. Compatibility with an external holder or boring bar depends on the insert’s shape, 0° clearance angle, tolerance class, fastening method, size and thickness, so confirm these details against the chosen clamping system before first use to ensure secure seating and repeatable performance. System setup and maintenance for minimal downtime A complete cutting system typically comprises the ISO indexable insert, a matching external holder or boring bar, a backing or clamping kit and replacement screws, which keeps maintenance fast and predictable. Regular inspection and correct torqueing of the clamp, together with timely indexing of the insert, help maintain surface finish and prolong the life of both insert and holder. The standardised dimensions of the insert make replacement straightforward, supporting efficient tool changes and reduced machine downtime. For reliable, high‑productivity turning with Tungaloy indexable inserts, contact Metav Werkzeuge to check availability and receive application guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance. Technical data Article number: 6966151 Manufacturer SKU: TUN6966151 Model series: ISO turning indexable inserts Material: Carbide (Hartmetall) Coating / Grade: AH8015 (PVD-coated) Core specifications Size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Features & applications Rhombic DNMG110408 form Central cylindrical hole (with hole) Double-sided chipbreaker Suited for external and internal turning Intended for heat-resistant alloys FAQ What materials is this insert suitable for? The DNMG110408 AH8015 indexable insert is intended primarily for machining heat‑resistant alloys; the AH8015 grade balances wear resistance and edge strength for general applications. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius improves surface finish and edge strength on medium feeds, reducing chatter risk and supporting more consistent dimensional accuracy during turning operations. Is the insert compatible with standard ISO holders? Compatibility depends on matching the insert’s form, clearance angle, tolerance class, fastening method, size and thickness to the chosen ISO holder; the insert’s ISO designation simplifies selection for compatible clamping systems. How many cutting edges are available per insert? The insert features a double‑sided chipbreaker, providing two usable cutting edges per side and enabling economical indexing to reduce tooling costs. Which product code should be referenced when ordering? Reference article number 6966151 or manufacturer SKU TUN6966151 together with the designation DNMG110408 AH8015 when enquiring about the Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 AT9530 Wendeplatten - Tungaloy
Benefit from the combination of coated AT9530 cermet for superior surface quality, the DNMG110408 rhombic geometry with a 55° approach, and the double-sided chipbreaker for extended in-process life; order the insert directly via Metav Werkzeuge or contact our consultants for application support. DNMG110408 AT9530 Tungaloy turning insert — rhombic ISO finishing insert, 55° The DNMG110408 AT9530 is an ISO rhombic turning insert designed for finishing and light turning of steel, optimised to deliver consistent surface quality and predictable wear. DNMG110408 AT9530 rhombic insert, 55° approach Coated cermet grade AT9530 for fine finishing Double-sided chipbreaker for consistent chips Cylindrical hole for secure, ISO-compatible clamping Consistent surface finish through a specialised cermet grade The coated cermet AT9530 is developed for finishing and light machining of steel, offering a balance between hardness and abrasion resistance that promotes an even wear pattern and excellent surface finish. Cermet combines ceramic hardness with metal toughness, which reduces the risk of built-up edge during low to moderate cutting speeds. For production environments that prioritise part quality and repeatability, this insert type supports reliably high cosmetic and dimensional results while keeping rework to a minimum. Secure clamping and ISO compatibility for flexible tool set-ups The rhombic geometry with a 55° approach angle and the cylindrical locating hole ensure secure retention in standard ISO-compatible toolholders. Compatibility depends on holder form, relief angle, tolerance class, fixation and insert size, so the insert integrates into common systems without time-consuming adaptations. The 0° relief angle and ISO form factor simplify alignment and reduce set-up variation, which in turn shortens lead times and increases first-pass yield in small-batch and series production. Improved productivity with predictable chip control and longer indexable life A double-sided chipbreaker offers two effective cutting edges per index, doubling the serviceable life of each insert seat and reducing tool-change frequency. The chip control geometry stabilises chip formation during finishing cuts and helps maintain a consistent load on the cutting edge, which contributes to steady machining performance and less downtime. In practical terms, this means fewer interruptions on the shop floor and a more efficient process flow for turning operations that demand both quality and throughput. Practical selection notes for turning operations and holder matching When specifying an insert for external or internal turning, choose the chipbreaker and grade according to workpiece material, machining type and machine/tool stability. The insert has an inscribed circle of 11 mm and a corner radius of 0.8 mm, values that favour fine-detail finishing and controlled engagement. The insert is delivered in the ISO DNMG form with a cylindrical hole for secure clamping; include matching clamping pads and screws in the system set-up to ensure repeatable seating and torque control. For light finishing of steel components the combination of geometry, corner radius and AT9530 grade provides a cost-effective route to consistent part quality. For assured finishing results with Tungaloy quality, request the DNMG110408 AT9530 turning insert via Metav Werkzeuge or contact our technical advisors at Metav Werkzeuge for tailored recommendations and holder compatibility checks; eMail: info@metav-werkzeuge.com – Tel: +49 2822 7131930 Technical data Article number: 6773696 Manufacturer SKU: TUN6773696 Type designation: DNMG110408 Grade: AT9530 Manufacturer item name: DNMG110408 AT9530 Tungaloy turning insert Facts Inscribed circle: 11 mm Corner radius: 0.8 mm Approach angle: 55° Relief/rake angle: 0° Hole: with cylindrical hole Special features Coated cermet cutting material ISO rhombic geometry Double-sided chipbreaker Designed for finishing and light machining of steel Compatibility with ISO-standard holders and clamping systems FAQ What materials is this insert intended for? The DNMG110408 AT9530 Tungaloy turning insert is intended primarily for finishing and light machining of steel, with the AT9530 cermet grade optimised for surface quality and even wear. How does the chipbreaker affect productivity? The double-sided chipbreaker on this Tungaloy insert improves chip control and provides two usable cutting edges, reducing tool changes and increasing process uptime. Which holders are compatible with this insert form? Compatibility requires a holder that accepts ISO rhombic inserts with a 55° approach and a cylindrical locating hole; check holder form, relief angle, tolerance class, fixation and insert thickness for correct matching. What are the key dimensions to note when specifying the insert? Important dimensions include the inscribed circle of 11 mm and a corner radius of 0.8 mm; the approach angle is 55° and the relief angle is 0°. Can this insert be used for internal turning? Yes, the ISO DNMG form and chipbreaker design make the insert suitable for both external and internal turning when the holder geometry and stability are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of the GT9530 coated cermet for improved surface quality, the ISO DNMG110408 format for straightforward integration, and the economical double-sided design for efficient indexation; order directly via Metav Werkzeuge or contact their advisors for technical clarification. DNMG110408 GT9530 Turning insert (ISO 110408) by Tungaloy DNMG110408 GT9530 is a coated cermet turning insert designed for finishing to light general turning of steel under stable machining conditions ISO DNMG110408 rhombic insert Coated cermet GT9530 for fine surface quality 0.8 mm corner radius for consistent finishes Double-sided insert with cylindrical hole Consistent surface quality and longer cutting intervals The combination of a coated cermet substrate and the GT9530 grade delivers a balance of wear resistance and surface integrity that suits finishing and light turning operations. Cermet is a composite of ceramic and metallic binders that reduces built-up edge and supports superior surface finish, while the GT9530 specification extends the interval between regrinds in stable setups. For applications where part quality and predictable tool life matter, this geometry and grade minimise rework and enhance process consistency. Simple integration into ISO systems for efficient setup Designed as an ISO-standard DNMG insert, compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert fits standard rhombic holders or compatible boring bars when the 0° clearance and the 11 mm seat dimensions match the toolholder; using the correct shim and clamping set ensures secure fixation. The kit for a machining station typically comprises an insert, a matched external holder or boring bar, a support shim/clamp set and replacement screws, enabling rapid, repeatable changeovers and reduced machine downtime. Geometry and chip control for predictable machining The rhombic form with a 0.8 mm corner radius supports fine surface finishes and controlled tool engagement, while the double-sided chipbreaker provides two usable cutting edges per side for economical indexing. The cylindrical hole ensures reliable clamping and accurate seating in the pocket, reducing vibration risk. Explaining terms: a chipbreaker is a small groove or series of steps that shapes and breaks chips for safe evacuation; a double-sided insert offers more indexable edges, reducing tooling cost per part when compared with single-edged alternatives. Recommended applications and handling guidance This insert is tailored to turning operations where stable machining and good surface finish are priorities, such as light finishing of steels. Select a matching chipbreaker and the GT9530 grade according to workpiece material and rigidity of the setup to benefit from the grade’s wear resistance. For best results, maintain correct toolholder geometry and clamping torque, and follow the machining parameters recommended for cermet grades to avoid thermal shock during interrupted cuts. For technical advice, availability or to place an order for Tungaloy GT9530 inserts, contact Metav Werkzeuge—info@metav-werkzeuge.com or +49 2822 7131930—where experienced consultants can assist with application-specific recommendations Technical data Article number: 6998089 Manufacturer SKU: TUN6998089 SKU: 6998089-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Insert designation: DNMG110408 GT9530 Dimensions and numbers Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included hole: with hole (cylindrical) Included angle (wedge): 55° Design and materials Plate form: rhombic Cutting material: coated cermet (GT9530) Chipbreaker: double-sided Typical application: turning (Drehen) System components: ISO insert, compatible external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The GT9530 coated cermet is engineered for processing steels in finishing to light general turning; the grade emphasises surface quality and extended life under stable cutting conditions. Is the insert reversible or indexable? Yes, the insert is double-sided with a rhombic form, providing multiple usable cutting edges for economical indexing during production. How does the DNMG geometry affect holder compatibility? Compatibility depends on form, clearance angle (0°), tolerance class, fastening method, size (11 mm) and thickness (4.76 mm); matching these parameters to a DNMG-capable holder ensures secure seating. What advantage does cermet offer over conventional carbide? Cermet combines ceramic hardness with metallic toughness to reduce built-up edge and improve surface finish; the GT9530 grade balances wear resistance and finish for finishing operations. How should the insert be clamped in the pocket? Use the correct support shim and clamping set with the recommended torque to ensure accurate seating of the cylindrical-hole insert and to reduce vibration and misalignment. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com