DNMG 110408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, precise 55° rhombic geometry, and a 0.8 mm corner radius for consistent surface finish and productive turning cycles; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DNMG 110408 T9215 turning insert (CVD-coated carbide, 55°) by Tungaloy DNMG110408 T9215 is an ISO‑format indexable turning insert engineered for medium steel machining, offering a reliable balance between wear resistance and fracture toughness for high-productivity turning operations. CVD-coated carbide for high wear resistance ISO‑standard rhombic insert, 55° geometry Double-sided design with cylindrical hole Corner radius 0.8 mm for consistent finishing Consistent productivity through material and grade choice The combination of CVD-coated carbide and the T9215 grade provides a predictable wear pattern and extended tool life in medium steel applications. The chemical vapour deposition (CVD) process builds a wear-resistant coating that reduces flank wear and preserves the cutting edge under continuous and lightly interrupted cuts. As a result, the insert supports longer uninterrupted runtimes and fewer indexings, which translates into improved throughput and reduced tool-change downtime. Geometry and clamping for process reliability The 55° rhombic geometry and the included cylindrical hole ensure secure clamping and compatibility with standard ISO holders. The rhombic plate form allows flexible approach angles for both external and internal turning, while the double-sided design delivers economical use of the cutting edges. Compatibility depends on form, clearance angle, tolerance class, fastening and size, so verifying holder match is essential for stable cutting conditions and repeatable results. Surface finish and dimensional control from a precise radius A corner radius of 0.8 mm gives a reliable compromise between edge strength and surface quality: substantial enough to resist chipping under variable loads, yet fine enough to produce a controlled surface finish on turned parts. For applications requiring consistent dimensional tolerance and improved surface integrity, this radius supports predictable chip formation and contributes to enhanced part quality with fewer downstream operations. Application guidance and operational benefits Designed specifically for turning operations in medium steels, the insert supports both continuous and light interruption cutting when paired with the correct chipbreaker and cutting parameters. The T9215 grade combines good fracture resistance with stable wear performance, enabling higher cutting speeds and productive cycle times compared with standard uncoated grades. If application-specific parameter settings are required, the technical consultants at Metav Werkzeuge can advise on feed, speed and coolant strategies to maximise process security. For procurement or application consultation regarding the Tungaloy DNMG110408 T9215 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 for ordering and tailored technical advice Technical data Article number: 6944645 Manufacturer: Tungaloy Manufacturer SKU: TUN6944645 SKU: 6944645-Tungaloy Numbers / Core technical data Geometry angle: 55° Corner radius: 0.8 mm Plate size: 11 Clearance angle: 0° Designs / Special features Rhombic plate form Double-sided chipbreaker Cylindrical hole for secure fixing CVD-coated carbide grade T9215 ISO-compatible turning insert FAQ What materials is this insert suitable for? The DNMG110408 T9215 insert is optimised for medium steel machining, where the T9215 carbide grade provides a balance of wear resistance and toughness for productive turning operations. How is holder compatibility ensured for the insert? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG110408 is ISO‑compliant so matching the holder to the ISO geometry and the insert's 55° profile ensures correct clamping. Is the insert indexable and reversible? Yes, the insert is double‑sided and indexable, allowing both cutting edges to be used before replacement; the cylindrical hole supports secure fixation in the appropriate ISO holder. What advantages does the T9215 grade offer? The T9215 CVD‑coated carbide grade combines high wear resistance with good fracture safety, enabling higher productivity and longer tool life in continuous to lightly interrupted cuts. Can the insert handle interrupted or roughing cuts? The DNMG110408 with T9215 grade is suitable for continuous and light interruption; for heavy interruption or severe roughing, select an appropriate chipbreaker and review cutting parameters for enhanced edge protection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
DNMG110408 T9215 Tungaloy Wendeplatte zum Drehen Die DNMG110408 T9215 Tungaloy-Wendeplatte ist für das Außen- und Innendrehen entwickelt und bietet hohe Produktivität bei mittleren Stählen. CVD-beschichtetes Hartmetall für hohe Standzeit Rhombische Form Größe 11 mit 0,8 mm Eckradius Plattendicke 4,76 mm für stabile Schnittführung Doppelseitiger Spanbrecher und zylindrisches Loch ISO-genormt, kompatibel mit gängigen Außenhaltern Langlebigkeit durch moderne Beschichtung und Sortenwahl Die Kombination aus CVD-Beschichtung und dem Schneidstoff der Sorte T9215 sorgt für eine ausgewogene Balance von Verschleißwiderstand und Bruchsicherheit. Dadurch eignet sich die Platte besonders für mittlere Stahlbearbeitung, in der konstante Schnittbedingungen und lange Standzeiten wirtschaftlich wirken. Die Beschichtung verbessert die Thermostabilität und verringert Reibung, was die Werkzeugstandzeit erhöht. Vielseitige Einsatzmöglichkeiten und einfache Integration Als ISO-genormte Drehplatte passt das Teil in standardisierte Halter; die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die rhombische Plattenform ermöglicht sowohl Außen- als auch Innendrehen. Die doppelseitige Ausführung bietet zwei Schnittkanten pro Seite, was den Werkzeugkosten-pro-Bauteil reduziert und den Maschinenlaufzeiten zugutekommt. Präzision und Oberflächenqualität bei stabilen Bedingungen Der 0,8 mm Eckradius und die Plattendicke von 4,76 mm unterstützen eine robuste Schneidkante, die bei kontinuierlichem bis leicht unterbrochenem Schnitt für gleichmäßige Oberflächen sorgt. Ein Freiwinkel von 0° steht für eine neutrale Geometrie, die Stabilität bei seitlichen Kräften fördert und in der Praxis zu reproduzierbaren Ergebnissen führt. Das ermöglicht eine feine Abstimmung von Vorschub und Schnittgeschwindigkeit für gewünschte Oberflächenqualitäten. Wirtschaftlichkeit für serielle Fertigung und Werkstattbetrieb Konzipiert für produktive Zerspanung, reduziert die Wendeplatte Rüstzeiten durch standardisierte Abmessungen und minimiert Ausfallkosten durch verlängerte Produktivität. Produktionsbetreiber und Lohnfertiger profitieren von der Kombination aus Stabilität und einfacher Ersatzteilversorgung. Die Auswahl des passenden Spanbrechers und der richtigen Sorte ist entscheidend, um Schneidkosten pro Teil weiter zu senken. Empfehlung: Für effiziente Stahlbearbeitung die T9215-Sorte von Tungaloy wählen und technische Beratung über info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfordern Produktmerkmale Artikelnummer: 6797192 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Fakten Radius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 11 Winkel: 55° Freiwinkel: 0° Eckenradius: 0,8 Besonderheiten Material: Hartmetall Sorte/Beschichtung: T9215 Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Gasphasenabscheidung) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Einsatz: Drehen FAQ Für welche Werkstoffe eignet sich die Platte am besten? Die DNMG110408 T9215 Tungaloy-Wendeplatte ist erste Wahl für die Bearbeitung von mittleren Stählen und bietet mit der Sorte T9215 hohe Verschleißfestigkeit bei produktiven Schnitten. Wie beeinflusst der Eckradius die Bearbeitung? Ein Eckradius von 0,8 mm erhöht die Stabilität der Schneidkante und verbessert die Oberflächenqualität bei moderaten Vorschüben, wodurch die Standzeit der DNMG110408 T9215 Wendeplatte positiv beeinflusst wird. Welche Halter sind kompatibel mit dieser ISO-Platte? ISO-genormte Außenhalter und Bohrstangen, die Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke unterstützen, sind kompatibel; die Normisierung erleichtert den Austausch in seriennahen Aufbauten. Ist die Sorte T9215 für unterbrochene Schnitte geeignet? Ja, die Sorte T9215 kombiniert Bruchsicherheit mit Verschleißwiderstand und eignet sich für kontinuierliche bis leicht unterbrochene Schnitte, wie sie in vielen Serienprozessen vorkommen. Welche Rolle spielt die CVD-Beschichtung? Die CVD-Beschichtung erhöht die Thermostabilität und reduziert Verschleiß, was besonders bei höheren Schnittgeschwindigkeiten und länger laufenden Prozessen die Werkzeuglebensdauer verlängert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 110408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for higher wear resistance and the proven DNMG rhombic geometry for secure, productive turning; the insert’s compatibility with ISO turning holders simplifies tool changeover and reduces downtime. Order or request supply details via Metav Werkzeuge for quick delivery and application advice. DNMG 110408 T9215 — ISO indexable insert for turning (Tungaloy) The DNMG110408 T9215 is an ISO rhombic indexable insert designed for general turning applications, offering a balanced solution for productive medium-steel machining. ISO rhombic DNMG geometry, 55° cutting angle CVD-coated carbide grade T9215 for medium steel Double-sided insert with cylindrical centre hole 0.8 mm corner radius and 4.76 mm thickness Reliable productivity for medium-steel turning The CVD-coated cutting grade T9215 is engineered for consistent performance in medium steel work, combining elevated wear resistance with robust fracture resistance. This balance reduces unplanned tool changes and supports steady machining rates, so the insert contributes directly to measurable shop-floor productivity gains. The coating also helps maintain cutting-edge integrity under continuous or slightly interrupted cuts, limiting abrasive wear and extending the effective life of each indexable cutting edge. Consistent chip control and secure clamping for predictable results Designed as a double-sided rhombic insert with a cylindrical centre hole, the geometry promotes repeatable chip formation and reliable seating in the toolholder. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness — all ISO criteria that influence clamp stability and repeatability. The 55° rhombic form and 0.8 mm corner radius deliver a mix of edge strength and finishing capability, while the 0° clearance angle suits a range of external turning tasks. Proper matching to the holder reduces vibration and improves surface finish. Fast integration into standard turning tool systems for lower operating cost The insert is part of a simple system: ISO indexable plate, matching external holder or boring bar, a suitable shim/clamp set and replacement screws. This modular approach makes replacement and inventory management straightforward and helps to lower overall machining costs. In practice, the insert’s carbide substrate and CVD-coated surface provide repeatable tool life, allowing process planners to predict tool-change intervals more accurately. The result is improved throughput, fewer surprises at the machine and better utilisation of skilled operators. Contact Metav Werkzeuge today to discuss how the Tungaloy DNMG110408 T9215 insert can be integrated into existing turning setups and to arrange prompt supply and technical advice. Technical data Article number: 6772267 Manufacturer SKU: TUN6772267 SKU: 6772267-Tungaloy Brand: Tungaloy ISO designation: DNMG110408 Facts Cutting angle: 55° Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 11 mm Clearance angle: 0° Special features Material: carbide Coating: CVD-coated (T9215) Double-sided with cylindrical centre hole Rhombic plate form (DNMG) Suitable for turning; medium steel applications ISO-compatible insert for standard holders FAQ What applications is this insert best suited for? The DNMG110408 T9215 indexable insert from Tungaloy is optimised for turning operations in medium steel, providing a reliable balance of wear resistance and edge security suitable for continuous to lightly interrupted cuts. How does the T9215 coating benefit production? The CVD-coated T9215 grade increases surface hardness and wear resistance, which helps to maintain cutting performance over longer tool life and supports higher productive running times on repetitive turning operations. Is the insert compatible with common ISO toolholders? Yes, the DNMG110408 follows ISO geometry rules; compatibility depends on matching holder form, clearance angle, tolerance class, fastening and thickness — when paired correctly, it ensures secure clamping and repeatable results. Can the insert be used for interrupted cuts? The carbide substrate and fracture-resistant properties of the T9215 grade make the insert suitable for continuous and slightly interrupted turning; heavier interruptions may require a different grade or edge preparation. What are the key dimensions to check when retrofitting this insert? Verify the ISO designation (DNMG110408), plate thickness (4.76 mm), insert size (11 mm), corner radius (0.8 mm) and the presence of a cylindrical centre hole to ensure correct fit in the intended holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
High wear resistance and consistent edge stability make this insert ideal for productive medium‑steel turning; the CVD‑coated carbide T9215 provides long tool life while the rhombic 55° geometry with a 0.8 mm nose radius and double‑sided chipbreaker ensures reliable surface finishes. Order the DNMG110408 T9215 insert directly via Metav Werkzeuge or consult our specialists for holder compatibility. DNMG 110408 T9215 DNMG — Tungaloy indexable turning insert for turning, CVD‑coated carbide A DNMG‑style indexable insert designed for general turning applications in medium‑strength steels; ISO‑compliant geometry for use with standard external holders and tool systems. CVD‑coated carbide grade T9215 Rhombic 55° geometry for stable cuts Double‑sided chipbreaker for versatile use ISO‑standard insert, 11 mm size Proven wear resistance for productive turning The T9215 grade represents a CVD‑coated carbide solution optimised for medium‑steel machining, combining elevated wear resistance with fracture toughness. This balance reduces the frequency of insert changes and contributes directly to higher machine uptime and predictable tool life. For operations that prioritise throughput, the hard coating delays flank wear and sustains cutting‑edge integrity, meaning fewer unplanned interruptions and steadier component quality. Stable cutting geometry reduces vibration and improves finish The rhombic 55° lead angle and 0° clearance are engineered to support steady cutting forces during both external and internal turning operations. A 0.8 mm nose radius gives a good compromise between edge strength and surface finish, while the double‑sided chipbreaker maintains reliable chip control across a range of feeds. Compatibility with the holder is determined by shape, clearance, tolerance class, fastening, size and thickness; correct pairing with the appropriate external holder ensures clamping stability and repeatable results. Simple integration into ISO tool systems for efficient inventory As an ISO‑standard insert in DNMG format, this component slots into standard indexable turning systems together with a matching outer holder, clamp/seat and replacement fastening screws. The 11 mm insert size and 4.76 mm thickness make stocking and substitutions straightforward, reducing complexity in the tool store. The insert’s with cylindrical hole fixation style simplifies positioning and indexing, allowing quick rotation to fresh cutting edges and minimising changeover downtime. Targeted use and selection guidance for reliable outcomes Intended primarily for turning of medium steels under continuous or lightly interrupted cuts, the insert performs best when the chipbreaker and grade are selected to match the workpiece and the machine‑tool stability. Consider the workholding and cutting parameters first: a stable setup combined with the T9215 grade will exploit the coating’s wear resistance and mechanical strength. For mixed‑production environments, the double‑sided configuration reduces the number of stocked items while maintaining versatility. Contact Metav Werkzeuge today to specify Tungaloy DNMG110408 T9215 CVD‑coated inserts for medium‑steel turning; our consultants will advise on holder compatibility and supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772229 SKU: 6772229‑Tungaloy Manufacturer SKU: TUN6772229 Facts Geometry angle: 55° Nose radius: 0.8 mm Insert size: 11 mm Thickness: 4.76 mm Clearance angle: 0° Special features Shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Material: cemented carbide Coating/grade: T9215 (CVD‑coated) Application: turning FAQ What materials is this insert best suited for? The DNMG110408 T9215 insert is primarily specified for medium‑strength steels; the T9215 grade combines wear resistance and toughness for productive turning of such materials. How does the insert attach to a holder? This insert uses a cylindrical hole for fixation; compatibility with an external holder depends on form, clearance, tolerance class, fastening method, size and thickness. Can the insert be indexed to use multiple cutting edges? Yes, the double‑sided DNMG geometry allows rotation to fresh edges, extending effective tool life and reducing inventory requirements. Which chipbreaker should be chosen for roughing or finishing? Select a chipbreaker that matches the workpiece material and the intended cutting mode; the double‑sided chipbreaker on this grade offers versatility across roughing and semi‑finishing tasks. Is this insert ISO‑compliant for standard tool systems? Yes, the design complies with ISO‑standard DNMG dimensions, facilitating straightforward integration into common turning tool systems. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide in grade T9215 and the rhombic 55° geometry to achieve high productivity and reliable tool life in medium-steel turning; order directly via Metav Werkzeuge or contact our consultants for application advice. DNMG110408 T9215 indexable turning insert (DNMG 110408) by Tungaloy — CVD-coated carbide, 55° A DNMG110408 T9215 indexable turning insert engineered for external and internal turning, offering a robust CVD-coated carbide grade suited to continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 55° rhombic geometry, 11 mm size 0.8 mm corner radius for general turning Double-sided chipbreaker, cylindrical hole High productivity and durable cutting performance for medium steel The T9215 carbide grade combines CVD-coated surface technology with a substrate optimised for a balance of wear resistance and fracture toughness. This gives a reliable cutting edge for medium-steel machining, enabling longer tool life and fewer index changes during production. With the insert’s combination of coating and substrate, process stability is improved in sustained operations, which translates into better machine uptime and consistent component quality. The grade is suitable for both stable continuous feeds and light interruptions in cut, providing a competitive throughput without compromising edge integrity. ISO compatibility and secure clamping for easy integration Belonging to an ISO model series of indexable turning inserts, the DNMG shape ensures straightforward integration into established toolholders. Compatibility with a holder is governed by the insert’s shape, 0° clearance, tolerance class, fastening method, size (11 mm) and 4.76 mm thickness; matching these parameters ensures correct seating and repeatable positioning. The insert’s cylindrical hole supports secure clamping in standard mounts, and the typical system setup comprises a matching external holder or boring bar, a support/clamp set and replacement screws to maintain stable assembly. This predictability simplifies tool setup and reduces process variation during series production. Practical selection: chip control, geometry and application guidance The double-sided chipbreaker design offers consistent chip formation and evacuation, reducing chatter and improving surface finish in many turning tasks. The 0.8 mm corner radius provides a useful compromise between edge strength and finishing capability, while the rhombic 55° geometry is well suited to a broad range of turning operations where access and form control are important. For best results in medium-steel work, pair this insert with appropriate feeds and speeds recommended for CVD-coated carbide and select the chipbreaker and grade to match the workpiece stability and the nature of the cut. The result is reduced rework and improved dimensional consistency. For high-productivity turning with Tungaloy’s CVD-coated T9215 inserts, contact Metav Werkzeuge for availability and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6772233 Manufacturer SKU: TUN6772233 Our SKU: 6772233-Tungaloy Model series: ISO indexable turning inserts Designation: DNMG110408 Core data Material: carbide Coating / grade: T9215 (CVD-coated) Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 55° Clearance angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Features / Applications Intended use: turning (external and internal) Best for: medium-steel machining Cut type: continuous to slightly interrupted cuts System components: ISO insert, matching external holder or boring bar, support/clamp set, spare screws Shape: rhombic, indexable on both sides FAQ What materials is this insert suitable for? The DNMG110408 T9215 insert is designed primarily for medium-steel machining; the T9215 CVD-coated carbide provides the wear resistance and toughness required for these applications. Can the DNMG110408 be used for both external and internal turning? Yes, the rhombic 55° geometry and the insert’s dimensions make it suitable for both external and internal turning operations. How is compatibility with a holder checked? Compatibility depends on the insert’s shape, clearance angle (0°), tolerance class, fastening method, size (11 mm) and thickness (4.76 mm); matching these parameters ensures correct seating and secure clamping. What advantages does the double-sided chipbreaker offer? The double-sided chipbreaker provides consistent chip formation and evacuation on each indexed side, improving surface finish and reducing the likelihood of chip-related interruptions. Which SKU identifies this product for ordering? The product is listed under manufacturer article number 6772233 and manufacturer SKU TUN6772233; our SKU is 6772233-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
DNMG 110408 T9215 Drehwendeschneidplatte von Tungaloy Die DNMG 110408 T9215 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen mittlerer Stahlwerkstoffe und bietet eine Kombination aus hoher Produktivität und Bruchsicherheit DNMG110408 ISO-genormt, rhombisch 55° CVD-beschichtetes Hartmetall für hohe Standzeit Doppelseitiger Spanbrecher, beidseitig nutzbar Zylindrisches Loch für sichere Befestigung Plattendicke 4,76 mm, stabile Sitzlage Materialvorteile für langlebige Bearbeitung Die DNMG110408 T9215 setzt auf Hartmetall mit CVD-Beschichtung, was einen erhöhten Verschleißwiderstand bei konstanten Schnittbedingungen bedeutet. Durch die CVD-Technologie wird eine harte, verschleißfeste Schicht erzeugt, die die Standzeit verlängert und die Anzahl der Werkzeugwechsel reduziert. Für Anwender bedeutet das weniger Stillstand, geringere Ersatzteilkosten und planbare Prozesszyklen. Effizienz im Drehen mittlerer Stähle Für das Drehen mittlerer Stahlwerkstoffe wurde die Sorte T9215 optimiert: sie verbindet Bruchsicherheit mit hoher Abtragsleistung und eignet sich sowohl für kontinuierlichen als auch leicht unterbrochenen Schnitt. Das Resultat ist eine gesteigerte Fertigungsleistung bei stabiler Oberflächengüte, was insbesondere in Serienprozessen die Wirtschaftlichkeit erhöht. Präzise Systemkompatibilität und Montage Die Konstruktion als ISO-Drehwendeschneidplatte mit rhombischer Plattenform und einem Winkel von 55° gewährleistet breite Kompatibilität zu gängigen Außenhaltern. Das zylindrische Loch erleichtert die Ausrichtung und sorgt für sicheren Sitz; die Plattendicke von 4,76 mm trägt zur Stabilität bei und reduziert Vibrationen. So lässt sich die Platte einfach in bestehende Systemaufbauten integrieren. Spanbildung und Prozesssicherheit Der doppelseitige Spanbrecher wurde so ausgelegt, dass er bei typischen Schnittparametern saubere Spanformung liefert und die Schnittkräfte reduziert. Das führt zu weniger Wärmeeintrag am Schneidkantenbereich und zu konstanteren Standzeiten. Für Fertiger bedeutet das konsistente Teilequalität und planbare Werkzeugkosten bei hoher Schnittgeschwindigkeit. Empfehlung: Für produktive, wirtschaftliche Drehbearbeitung die DNMG 110408 T9215 von Tungaloy wählen; bei Fragen technische Beratung per eMail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 6966139 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten SKU Hersteller: TUN6966139 Bezeichnung: DNMG110408 Fakten Radius: 0,8 mm Winkel: 55° Plattendicke: 4,76 mm Plattengröße: 11 Besonderheiten Material: Hartmetall Schneidstoff: CVD-beschichtetes Hartmetall (CVD: chemische Gasphasenabscheidung) Sorte: T9215 Spanbrecher: doppelseitig Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch Freiwinkel: 0° Eckenradius: 0,8 Anwendung: Drehen Einsatzbereich: mittlere Stahlbearbeitung Systemaufbau: ISO-Drehplatte, Außenhalter, Unterlage/Klemmsatz, Ersatzschrauben FAQ Wie montiere ich die DNMG 110408 T9215 korrekt auf dem Außenhalter? Die DNMG 110408 T9215 wird über das zylindrische Loch zentrisch auf dem Außenhalter positioniert und mit der passenden Schraube gesichert; für exakte Sitzlage sorgen Unterlage und Klemmsatz. Achten auf die richtige Toleranzklasse des Halters. Für welche Werkstoffe ist die Sorte T9215 geeignet? Die Sorte T9215 von Tungaloy ist erste Wahl für die mittlere Stahlbearbeitung und wurde für hohe Produktivität bei kontinuierlichem bis leicht unterbrochenem Schnitt entwickelt. Was bedeutet doppelseitiger Spanbrecher bei dieser Wendeplatte? Doppelseitiger Spanbrecher heißt, dass die Platte beidseitig verwendbare Schneidkanten bietet und somit mehrfach indexiert werden kann, was die Nutzungsdauer steigert. Welche Vorteile bringt die CVD-Beschichtung bei der DNMG 110408 T9215? Die CVD-Beschichtung erhöht den Verschleißwiderstand der Schneidkante, verbessert die Standzeit und sorgt für konstante Ergebnisqualität über längere Einsatzzeiten. Ist die DNMG 110408 T9215 für unterbrochene Schnitte geeignet? Ja, die Sorte T9215 kombiniert Bruchsicherheit mit guter Verschleißresistenz, sodass leichte Unterbrechungen im Schnitt im typischen Anwendungsbereich toleriert werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 110408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T9215 grade and a rhombic DNMG110408 geometry with a 0.8 mm corner radius, which together deliver high wear resistance and consistent productivity for medium-steel turning; order directly via Metav Werkzeuge or consult the technical advisors for process data and holder compatibility. DNMG 110408 T9215 Tungaloy turning insert — CVD-coated carbide, rhombic 11 mm A DNMG110408 T9215 indexable turning insert designed for external and internal turning of medium steel, offering a robust, ISO-compatible solution for productive, continuous and lightly interrupted cuts CVD-coated carbide T9215 for wear resistance Optimised for medium-steel machining 0.8 mm corner radius for edge strength Double-sided chipbreaker with cylindrical hole Increased productivity through wear-resistant grade and coating The CVD-coated T9215 grade combines a hard, protective coating with a tough carbide substrate to extend tool life and maintain dimensional stability in high-throughput applications. The DNMG geometry, with its rhombic form and controlled clearance, provides repeatable orientation in ISO-compliant holders, allowing predictable tool life and consistent surface finish. This performance-oriented combination reduces unplanned downtime and supports stable cutting parameters in continuous and slightly interrupted turning operations. Stable cutting behaviour and reliable clamping for process security A modest 0.8 mm corner radius increases edge robustness while preserving the capacity for precise turning operations, and the double-sided chipbreaker promotes controlled chip formation across a range of cutting conditions. The insert’s cylindrical hole and standard ISO footprint ensure secure clamping in suitable external holders or boring bars, with the correct choice of holder determined by form, clearance angle, tolerance class, fastening and thickness. The 55° geometry contributes to a balanced cutting force distribution for repeatable component quality. Practical system integration and material suitability The insert is offered as part of an ISO turning insert system that requires a matching clamp pad or clamping set and replacement screws for complete assembly. Designed primarily for medium steel turning, the grade and chip control are tuned for productive machining while maintaining resistance to wear and occasional edge shock. For application advice, cutting data or holder recommendations, Metav Werkzeuge’s specialists provide targeted information to align insert grade, chipbreaker and cutting parameters with the specific machining scenario. Contact Metav Werkzeuge for application recommendations and order the Tungaloy DNMG110408 T9215 insert to optimise medium-steel turning with proven process stability Technical data Article number: 6773901 Manufacturer SKU: TUN6773901 SKU: 6773901-Tungaloy Designation: DNMG110408 T9215 Tungaloy insert Series: ISO turning indexable inserts Material: carbide Facts Corner radius: 0.8 mm Inscribed circle: 11 mm Thickness: 4.76 mm Clearance angle: 0° Included angle: 55° Special features Grade: T9215 (CVD-coated carbide) Double-sided chipbreaker Cylindrical hole Rhombic 55° geometry ISO-compatible indexable insert Application: turning (external and internal) System components: matching holder, clamp pad/clamping set, replacement screws FAQ What materials is this insert best suited for? The DNMG110408 T9215 insert is optimised for medium-steel machining; the CVD-coated T9215 grade balances wear resistance and toughness for productive turning. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions; compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness. How does the double-sided design affect tool life? The double-sided chipbreaker allows indexation of additional cutting edges, extending service life before replacement or regrinding is required. What role does the 0.8 mm corner radius play in the process? A 0.8 mm corner radius increases edge strength for interrupted or heavier cuts while maintaining acceptable surface finish for many turning tasks. Which system components are required to mount the insert? A matching external holder or boring bar, an appropriate clamp pad or clamping set and replacement screws complete the ISO system for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, robust fracture toughness and ISO‑compatible fitment for reliable, productive turning cycles; order the insert directly via Metav Werkzeuge or contact our specialists for selection support. DNMG 110408 T9215 Turning insert – CVD‑coated cemented carbide, Tungaloy The DNMG110408 T9215 indexable insert is an ISO‑standard rhombic insert designed for external and internal turning of medium steels, offering high productivity in continuous to light interrupted cuts. CVD‑coated cemented carbide grade T9215 Optimised for medium steel machining Rhombic 55° geometry with 0° clearance Double‑sided chipbreaker, cylindrical hole Engineered for productive medium‑steel turning The DNMG110408 T9215 insert combines a CVD‑coated surface with a cemented carbide substrate to deliver high wear resistance and reliable edge security during production runs. The T9215 grade is formulated as a first choice for medium steel applications, balancing longevity with resistance to chipping; this leads to fewer insert changes, reduced downtime and a steadier component quality. For operations aiming at consistent cycle times, the material pairing reduces flank and crater wear, supporting predictable tool life and easier process planning. Precise compatibility reduces setup uncertainty The insert’s ISO rhombic form and specified geometry ensure simple integration with standard toolholders: the rhombic 11 size and 4.76 mm thickness match ISO holders when form, relief angle, tolerance class, fastening and thickness are respected. The included cylindrical hole and the defined 55° cutting angle enable secure clamping and repeatable seating. Clear specification of these parameters reduces setup time, minimises indexing errors and supports reproducible part tolerances across batches. Chip control and reliable cutting under load Equipped with a double‑sided chipbreaker, the insert controls chip formation effectively during both continuous and slightly interrupted cuts. The chipformer design supports stable cutting forces, better surface finish and simplified chip evacuation—advantages that translate into fewer workpiece rejects and lower downstream reworking. When paired with the right feed and speed for medium steels, the chip control contributes directly to higher productivity and process reliability. Practical selection and application advice Select the chipbreaker and grade to match workpiece material, stability of the setup and the nature of the cut: for long, uninterrupted runs the T9215 grade is optimal; for very unstable setups consider tougher geometries or reduced cutting parameters. Where doubts remain about holder compatibility or insert orientation, consult tooling documentation and ensure that seat form, clearance and thickness align with the holder specifications. Proper selection reduces the risk of premature edge failure and secures repeatable performance. Contact Metav Werkzeuge for tailored recommendations on using Tungaloy turning inserts and to confirm holder compatibility for specific turning applications Technical Data Article number: 6782313 Manufacturer SKU: TUN6782313 SKU: 6782313-Tungaloy Model series: ISO‑turning inserts Designation: DNMG110408 Manufacturer: Tungaloy Data Insert size: 11 mm Thickness: 4.76 mm Nose radius: 0.8 mm Clearance angle: 0° Cutting angle: 55° Hole style: cylindrical Special features CVD‑coated cemented carbide, grade T9215 Rhombic plate form Double‑sided chipbreaker Suitable for external and internal turning Designed for medium steel machining Intended for continuous to light interrupted cuts ISO‑compatible mounting FAQ What materials is this insert suited for? The DNMG110408 T9215 insert is designed primarily for medium steel machining and performs well in continuous to light interrupted cuts. Can this insert be used in standard ISO holders? Yes, the insert conforms to ISO dimensions and will fit compatible holders when form, relief, tolerance and thickness are matched. What does the T9215 grade offer compared with other grades? T9215 is a CVD‑coated cemented carbide grade that combines high wear resistance with good fracture toughness, making it suitable for productive steel turning. Is the chipbreaker suitable for internal turning as well as external turning? The double‑sided chipbreaker provides effective chip control for both external and internal turning, provided the toolholder and machining parameters support chip evacuation. How should the insert be seated to ensure repeatability? Ensure the seating surface and clamp match ISO specifications and that the insert’s cylindrical hole is secured with the recommended fastener to achieve repeatable location and clamping force. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
Combine the robust T9215 CVD-coated carbide with the precise rhombic 55° geometry and 0.8 mm corner radius to achieve consistent productivity and reliable chip control; order the insert directly via Metav Werkzeuge or consult our advisors for compatibility and delivery options. DNMG110408 T9215 — ISO Turning Insert, CVD-coated Carbide, Tungaloy DNMG110408 T9215 indexable turning insert for medium-steel applications, designed to deliver high wear resistance and dependable chip management in continuous to lightly interrupted cuts. DNMG110408 geometry, rhombic shape, 55° angle CVD-coated carbide grade T9215 for medium steel Double-sided chipbreaker for consistent chip control Compatible with ISO turning toolholders Precise geometry for stable cutting and surface finish The DNMG110408 combines a rhombic profile with a 55° lead angle and a 0.8 mm radius to provide a balanced compromise between strength and accessibility. This geometry supports stable cutting forces, reduces vibration on overhangs and shoulders, and helps achieve a uniform surface finish with fewer passes. The 0° clearance angle maintains close tool engagement without compromising part tolerances, making this insert suitable for production environments where repeatability and part quality are priorities. Productive grade and coating for longer tool life The T9215 grade pairs a CVD coating with a tough substrate to offer elevated wear resistance and good fracture toughness. CVD (chemical vapour deposition) forms a hard, adherent layer that improves abrasive wear performance while the substrate controls toughness; together they extend tool life in medium-steel machining. For operations that demand steady output—continuous turning or slightly interrupted cuts—this combination reduces the frequency of index changes and supports predictable batch throughput, contributing directly to lower unit costs per component. Practical integration and secure clamping for reliable operation The insert features a double-sided chipbreaker and a cylindrical hole, enabling safe clamping and economical use of both cutting edges. As an ISO-standard indexable insert, compatibility with toolholders is governed by form, clearance, tolerance class, fastening, size and thickness; match these parameters when selecting a holder. The insert’s chip control geometry aids swarf evacuation under varying cutting conditions, simplifying process setup and minimising interruptions caused by poor chip formation or nesting. Contact Metav Werkzeuge for tailored advice on holder compatibility and delivery of the Tungaloy DNMG110408 T9215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations Technical data Article number: 6772212 Manufacturer SKU: TUN6772212 Our SKU: 6772212-Tungaloy Model series: ISO-Drehwendeschneidplatten (ISO turning inserts) Designation: DNMG110408 Grade: T9215 Cutting material: CVD-coated carbide Core specifications Insert size: 11 Corner radius: 0.8 mm Clearance angle: 0° Lead angle: 55° Double-sided design Hole style: cylindrical Features and compatibility Rhombic insert form Double-sided chipbreaker With hole for secure clamping Suitable for turning (external and internal) Intended for medium-steel machining Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert optimised for? The DNMG110408 T9215 insert is optimised for medium-steel machining; the T9215 CVD-coated carbide grade balances wear resistance and toughness for this material class. Can the insert handle interrupted cuts? Yes. The T9215 grade and the insert geometry are suitable for continuous to slightly interrupted cuts, offering a compromise between wear resistance and breakage safety. How does the chipbreaker affect performance? The double-sided chipbreaker on this indexable insert promotes consistent chip formation and evacuation, reducing the risk of swarf-related interruptions during turning operations. Which holders are compatible with this ISO insert? Compatibility is determined by shape, free angle, tolerance class, fastening, size and thickness; use holders specified for DNMG110408-type inserts and verify the clamping system matches the cylindrical hole and the rhombic form. Is the product supplied ready for immediate mounting? The insert is supplied as an ISO-standard indexable plate; verify the chosen holder matches the insert’s size, hole style and tolerance before mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable fracture toughness and ISO compatibility for efficient turning operations; order the DNMG110408 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG110408 T9215 Turning Insert — ISO DNMG turning insert, CVD‑coated carbide (Tungaloy) The DNMG110408 T9215 is an ISO‑standard rhombic turning insert designed for medium‑steel machining, combining a CVD‑coated carbide grade with a 55° geometry for productive continuous and lightly interrupted cuts. CVD-coated carbide grade T9215 Optimised for medium steel machining Rhombic 11 geometry, 55° cutting angle Double-sided chipbreaker with cylindrical hole High productivity through a robust coating and grade The combination of a CVD‑coated surface and the T9215 grade carbide delivers a controlled balance between wear resistance and toughness. This makes the insert especially suited to productive external and internal turning of medium‑hard steels, where secure edge stability reduces the risk of premature edge failure. The coating improves adhesion resistance at elevated temperatures, while the substrate toughness minimises catastrophic chipping; the overall effect is an insert that supports longer effective cutting times and a more consistent component quality. Stable geometry and dimensional compatibility for reliable clamping Designed as an ISO‑standard rhombic plate with a 55° cutting angle and a 0.8 mm corner radius, the geometry offers a dependable compromise between strength and finish. The 4.76 mm plate thickness and 11 mm plate size ensure compatibility with standard DNMG holders; compatibility is governed by plate form, clearance angle, tolerance class, attachment method, size and thickness. The presence of a cylindrical hole and a double‑sided chipbreaker contributes to secure clamping and predictable chip control, which is particularly valuable in repeatable production settings and when tool life uniformity is required. Practical advantages explained: chip control and application range A double‑sided chipbreaker on a rhombic plate enables two usable edges per side and practical indexing for economical usage. The chipbreaker geometry is tuned for continuous to slightly interrupted cuts common in turning cycles, giving consistent chip formation and evacuation. For workshops aiming to maintain throughput, this insert supports stable cutting in turning operations and is an effective choice when machining medium steel where a combination of surface quality and tool life is needed. The cylindrical hole supports secure fastening and straightforward replacement during scheduled tool changes. For production environments that prioritise repeatable performance, request the Tungaloy T9215 grade via Metav Werkzeuge or contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966163 SKU: 6966163-Tungaloy Manufacturer SKU: TUN6966163 Manufacturer item number: 6966163 Model series: ISO turning inserts Material: carbide Core specifications ISO designation: 110408 Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Hole: with hole (cylindrical) Special features Grade/coating: T9215, CVD-coated Plate form: rhombic Chipbreaker: double-sided Application: turning (external and internal) Compatible with ISO DNMG holders Two usable cutting edges per side FAQ What materials is this insert best suited for? The DNMG110408 T9215 insert is optimised for medium‑hard steel machining; the CVD coating and T9215 substrate combine wear resistance with edge toughness for productive steel turning. How does the chipbreaker affect machining performance? The double‑sided chipbreaker on the Tungaloy insert supports consistent chip formation and evacuation, improving surface finish and process stability during continuous and lightly interrupted turning. Is the insert compatible with standard DNMG holders? Compatibility is determined by plate form, clearance angle, tolerance class, attachment method, size and thickness; the ISO DNMG110408 format ensures fit with corresponding DNMG holders when those parameters match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
Take advantage of a productive combination: CVD‑coated carbide (T9215) for high wear resistance, a 0.8 mm corner radius for defined profiles and ISO compatibility for straightforward integration; order directly via Metav Werkzeuge or consult the technical team for selection support. DNMG 110408 T9215 rhombic turning insert by Tungaloy — CVD‑coated carbide, 55° approach DNMG110408 T9215 is an ISO rhombic indexable insert designed for external and internal turning, optimised for medium steel and continuous to slightly interrupted cuts CVD‑coated carbide for wear resistance ISO‑standard rhombic insert, 55° approach 0.8 mm corner radius for defined profile Double‑sided chipbreaker with hole Higher throughput through material and coating The combination of CVD‑coated carbide and the T9215 grade provides a balance between wear resistance and fracture toughness, making the insert particularly suited to steady production runs on medium steel. The coating reduces flank wear and helps maintain cutting geometry over longer cycles, which lowers tool-change frequency and contributes to a more predictable production rhythm. The result is measurable efficiency: fewer interruptions and a more consistent cycle time for turning operations. Predictable edge stability and less scrap A robust substrate and coating chemistry in this grade deliver stable edge condition under continuous and slightly interrupted cuts. Stable cutting edges reduce the risk of unexpected breakouts and limit the need for rework. This promotes dependable surface finish and repeatable part quality, which is especially relevant where batch consistency is required. The grade’s fracture resistance supports higher cutting parameters when machine and workpiece stability allow it. Simple integration with ISO holders and clear selection rules Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness. The rhombic form with a 55° approach angle and 0° clearance angle suits a wide range of ISO external holders and boring bars; the cylindrical hole secures the insert reliably in the pocket. For correct selection, match the chipbreaker and grade to workpiece material and machining stability; the insert’s ISO designation simplifies sourcing and reduces the effort in tool planning. Consistent chip control and application flexibility The double‑sided chipbreaker provides two usable cutting edges and promotes consistent chip formation for medium steel. A 0.8 mm corner radius gives a defined profile suitable for semi‑finishing and finishing passes where dimensional control matters, while the 4.76 mm thickness contributes to rigidity under interrupted cuts. Together these features support both external and internal turning operations and help achieve the intended surface quality with predictable tool life. For tailored recommendations on the Tungaloy CVD‑coated turning inserts or to confirm stock and delivery via Metav Werkzeuge, contact the Metav Werkzeuge sales team by email or phone for precise application guidance and rapid supply. Technical data Article number: 6772258 Manufacturer SKU: TUN6772258 SKU: 6772258-Tungaloy Article name: DNMG110408 T9215 Tungaloy indexable insert Facts Inscribed circle/size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Approach/lead angle: 55° Clearance angle: 0° Special features CVD‑coated carbide, grade T9215 ISO turning insert series Rhombic insert form Cylindrical hole for secure fixing Double‑sided chipbreaker Application: turning (external and internal) Suited to medium steel and continuous to slightly interrupted cuts FAQ What materials is this insert suited to? The DNMG110408 T9215 insert from Tungaloy is optimised for medium steel; the CVD coating and grade T9215 combine wear resistance with fracture toughness for productive turning. How is compatibility with holders ensured? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; the DNMG shape and cylindrical hole are configured for ISO holders and standard clamping systems. How many cutting edges are available per insert? The insert features a double‑sided chipbreaker, offering two usable cutting edges and therefore allowing reorientation for a fresh edge. What cutting profile and surface finish can be expected? With a 0.8 mm corner radius and the designed chipbreaker, the insert supports defined profiles and consistent surface finish in semi‑finish and finish turning on medium steel. Which features improve tool life under production conditions? The CVD coating, robust carbide substrate and the T9215 grade deliver enhanced wear resistance and edge stability, reducing changeover frequency and supporting predictable tool life. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9215 grade and the rhombic 55° geometry to increase productivity and tool life in medium-steel turning; order the DNMG 110408 T9215 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 110408 T9215 indexable insert for turning, Tungaloy DNMG 110408 T9215 is an ISO-standard indexable insert designed for external and internal turning in medium-steel applications CVD-coated carbide T9215 grade Optimised for medium-steel machining 55° rhombic geometry for versatile turning Double-sided insert with cylindrical hole Higher productivity with a balanced wear resistance The insert’s CVD-coated surface and carbide substrate deliver a reliable mix of wear resistance and fracture toughness, making it well suited to continuous and slightly interrupted cuts. Selecting the T9215 grade means a stable cutting edge under productive cutting conditions, which translates into fewer insert changes and reduced machine downtime. For operations where cycle time and repeatability matter, the combination of coating technology and substrate hardness supports consistent component quality and cost-efficient machining. Geometry and mounting that simplify set-up A 55° rhombic shape provides good access for both external and internal turning while maintaining rigidity in the cut. The insert’s 0° clearance and 0.8 mm corner radius are engineered to give an even distribution of cutting forces and a predictable surface finish. The cylindrical hole and standard ISO form ensure compatibility with commonly used external holders and brazed tool systems; compatibility depends on form, free angle, tolerance class, clamping method, size and thickness, so verification against the holder specification is recommended before use. Practical selection for shop-floor conditions The double-sided design offers economical edge utilisation while the integrated chipbreaker geometry supports effective chip control for medium steels. When paired with a suitable holder and cutting parameters matched to material and rigidity, the insert helps achieve consistent surface quality and longer tool life. For users transitioning from general-purpose grades, this solution reduces the need for frequent tool changes and supports higher throughput without compromising component integrity. Clear guidance for application and handling For turning operations in medium-strength steels, choose speeds and feeds that reflect the rigidity of the set-up and the part geometry; the insert performs best under steady, productive cutting conditions. The ISO DNMG110408 form and standard dimensions (11 mm size, 4.76 mm thickness) make tool management straightforward in production environments. If abrasive or highly interrupted cuts are expected, consider adapting the cut strategy or consulting for a grade optimised for increased toughness. For ordering, technical advice or to discuss holder compatibility, contact Metav Werkzeuge — Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 and can assist with delivery and application support for the DNMG 110408 T9215 insert Technical data Article number: 6772221 Manufacturer SKU: TUN6772221 SKU: 6772221-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Application: turning Facts Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Top angle: 55° Clearance angle: 0° Special features CVD-coated carbide grade T9215 Rhombic insert form DNMG110408 Cylindrical hole mounting Double-sided insert with chipbreaker ISO-standard indexable insert for external and internal turning Compatible with matched external holders; check form and tolerance FAQ What materials is this insert best suited for? The DNMG 110408 T9215 insert is optimised for medium-steel machining and offers a balance of wear resistance and toughness suitable for continuous to slightly interrupted cuts. Is the insert compatible with standard DNMG holders? Yes, the insert follows the ISO DNMG110408 form and mounts via a cylindrical hole; compatibility depends on holder form, free angle, tolerance class, clamping and thickness. How does the T9215 grade affect tool life? The T9215 grade combines a wear-resistant coating with a resilient carbide substrate to extend edge life under productive cutting conditions, reducing the frequency of index changes. Can this insert be used for internal turning as well as external turning? The rhombic geometry and ISO form make the insert suitable for both external and internal turning where access and holder geometry permit. What are the key dimensions to check before ordering? Confirm plate size (11 mm), thickness (4.76 mm), corner radius (0.8 mm), and the 55° geometry to ensure correct fitment and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of a wear-resistant CVD-coated carbide grade and a precise 55° rhombic geometry for reliable productivity and fracture resistance; order the insert directly via Metav Werkzeuge or request advice from our consultants if required. DNMG 110408 T9215 — ISO turning insert for external and internal turning — Tungaloy The DNMG110408 T9215 is an ISO rhombic turning insert designed for medium steel machining, offering a 55° cutting geometry with a 0° clearance angle and a cylindrical hole for secure clamping. CVD-coated carbide for enhanced wear resistance 55° rhombic geometry for versatile turning operations Double-sided chipbreaker for consistent chip control Compatible with ISO holders; cylindrical hole for secure clamping Consistent productivity through a wear-resistant grade The insert is built on a carbide substrate with a CVD-coated surface in grade T9215, a combination that delivers elevated wear resistance while maintaining good fracture toughness. This chemical vapour deposition layer increases the tool's resistance to abrasive wear, which extends service intervals and reduces the frequency of tool changes. For production environments focused on throughput, the result is fewer stoppages and more predictable tool-life cycles, making the component a solid choice for continuous to slightly interrupted cuts in medium steel. Geometry that delivers precision and reliable clamping A 55° rhombic cutting edge with a 0° clearance angle provides an adaptable geometry for both external and internal turning where approach angles demand a stable cutting face. The rhombic shape and the included cylindrical hole ensure precise positioning in compatible ISO clamping systems; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. The specified 0.8 mm corner radius balances edge strength and surface finish, helping to maintain dimensional accuracy and repeatable results across batch production. Operational efficiency and application guidance Equipped with a double-sided chipbreaker, the insert supports consistent chip formation and evacuation in medium steel applications, improving surface quality and reducing tool stress. The insert is intended as a first choice for the middle range of steel machining where a balance of high productivity and tool reliability is required. In practice, this means shorter machining cycles and a more predictable process window. The system concept—insert, matching external holder or boring bar, shim/clamping set and replacement screw—permits quick indexation and simple on-machine tool changes, supporting lean production workflows. Contact Metav Werkzeuge today for availability and tailored application advice on the Tungaloy DNMG110408 T9215 insert; technical queries can be emailed to info@metav-werkzeuge.com or discussed by phone at +49 2822 7131930 Technical data Article number: 6772255 Manufacturer SKU: TUN6772255 SKU: 6772255-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG110408 T9215 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 11 mm Special features CVD-coated carbide Grade: T9215, optimised for medium steel Double-sided chipbreaker Rhombic plate geometry Cylindrical hole for clamping Suitable for external and internal turning Compatible with ISO-standard tool holders FAQ What materials is this insert best suited for? This insert with grade T9215 is optimised for medium Stahl (steel) machining and offers a balance of wear resistance and toughness for continuous to slightly interrupted cuts. Can the DNMG110408 T9215 be used for rostfreier Stahl? The DNMG110408 T9215 is primarily designed for medium steel; performance on rostfreier Stahl (stainless steel) will depend on cutting parameters and may require different grades or coatings for optimised results. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker on this insert improves chip control and evacuation, leading to better surface finish and reduced risk of workpiece damage during turning operations. Is the insert compatible with my current holder? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG110408 format corresponds to ISO standards for rhombic turning inserts. How is repeatability achieved when indexing the insert? Repeatability is supported by the rhombic geometry and cylindrical hole clamping, which secure consistent seating in ISO-standard holders and help maintain dimensional accuracy across indexations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that balances toughness and wear resistance for medium to heavy steel turning; the ISO‑compatible geometry and secure cylindrical hole ensure reliable clamping and repeatable results. Order fast supply or consult Metav Werkzeuge for application-specific recommendations. DNMG110408 110408 T9225 indexable turning insert for medium to heavy steel, Tungaloy A DNMG110408 T9225 indexable insert designed for general turning operations in steel, combining a robust universal grade with ISO‑standard form and a double‑sided chipbreaker for interrupted and continuous cuts CVD‑coated carbide grade T9225 for steel machining Rhombic 55° geometry with 0° clearance angle Double‑sided chipbreaker for versatility Cylindrical hole for secure clamping Durable grade for demanding steel turning The CVD‑coated carbide composition labelled T9225 offers a balance of toughness and wear resistance that is particularly suited to medium to heavy steel operations. This composition helps resist chipping under varying engagement conditions and during slightly interrupted cuts, improving process stability. As a result, cycle times remain consistent and tool changes are less frequent, contributing to predictable production output and lower running costs. Geometry and dimensions that support accuracy The rhombic form with a 55° diamond shape and 0° clearance angle gives stable cutting contact and consistent chip formation. The corner radius 0.8 mm and 4.76 mm thickness combine to provide a repeatable cutting edge and good edge strength for heavier depths of cut. Compatibility with holders depends on form, clearance angle, tolerance class, fastening and thickness; matching these parameters with the right clamping system ensures secure positioning and repeatable part accuracy. Enhanced productivity through chip control and mounting Equipped with a double‑sided chipbreaker and a cylindrical hole for positive locating and fastening, the insert supports efficient chip evacuation and simple indexation. Using a double‑sided design effectively doubles the available cutting edges, reducing downtime for insert changes. The ISO conformity of the series simplifies integration into existing tooling systems, allowing rapid replacement and predictable performance across multiple workpieces. System considerations and practical application advice The ISO insert forms one part of a complete turning system that includes a matching external holder, mounting shim or clamp, and replacement screws. Selection of chipbreaker and grade should be guided by the workpiece material, machining stability and intended cutting parameters. For many shops, choosing this indexable insert for external and internal turning operations yields reliable surface finishes and repeatable dimensional control while keeping tool management straightforward. Contact Metav Werkzeuge for tailored machining advice or to secure supply of Tungaloy inserts; Metav Werkzeuge can provide technical guidance and fast delivery—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6797193 Manufacturer SKU: TUN6797193 SKU: 6797193-Tungaloy Name: DNMG110408 T9225 Tungaloy insert Facts Corner radius: 0.8 mm Thickness: 4.76 mm Size: 11 Diamond angle: 55° Clearance angle: 0° Special features CVD‑coated carbide grade T9225 Rhombic plate form (DNMG) Double‑sided chipbreaker Cylindrical hole for secure clamping ISO indexable turning insert series Suited to medium to heavy steel turning and interrupted cuts FAQ What materials is this insert intended for? The DNMG110408 T9225 insert is specified for medium to heavy steel machining and performs well where toughness is required for interrupted or variable engagement cuts. How is the insert secured to the holder? The plate is supplied with a cylindrical hole and is intended for positive clamping in compatible ISO‑type holders using the appropriate shim or clamp and fastening screw. Can the same insert be used for internal and external turning? Yes, the rhombic geometry and double‑sided chipbreaker allow the insert to be used for both external and internal turning when mounted in the correct holder. How does the T9225 grade affect productivity? The T9225 CVD coating improves wear resistance while retaining edge toughness, which can reduce tool changes and maintain consistent cycle times under medium to heavy cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9225 grade and ISO compatibility for a productive turning workflow; the 0.8 mm corner radius and 55° rhombic geometry provide robustness in medium to heavy Stahl operations and improved resistance to interrupted cuts. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific guidance. DNMG110408 T9225 – DNMG turning insert, CVD-coated carbide, 55° by Tungaloy A DNMG110408 T9225 indexable insert designed for external and internal turning, engineered as a robust universal grade for medium to heavy Stahl machining and intermittent cutting conditions. CVD-coated carbide grade T9225 55° rhombic geometry, ISO DNMG110408 0.8 mm corner radius for robust cutting Double-sided chipbreaker, with cylindrical hole Compatible with ISO turning holders Higher productivity through a robust CVD-coated grade The combination of the T9225 grade and CVD-coated surface delivers a balance between toughness and wear resistance that supports longer tool life and steadier cycle times in demanding turning tasks. The coating reduces flank and crater wear under elevated temperatures, while the substrate offers sufficient toughness where interrupted cuts occur. This results in fewer index changes and lower tooling costs per part, increasing overall process efficiency in series production and jobbing environments. Consistent clamping and stable cutting geometry for repeatable results Thanks to the rhombic profile and the cylindrical hole, the insert mates securely with standard clamping systems, improving seat repeatability and vibration damping. The double-sided chipbreaker is designed to control chip formation and evacuation for a broad range of feeds, which contributes directly to a consistent surface finish and reduced rework. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness, ensuring straightforward integration into existing tool systems. Fast system integration reduces setup and changeover time As an ISO-standard DNMG insert, the component fits established DIN/ISO holders and can be used with the usual set-up of insert, holder, shim/clamping set and screw. The standardised dimensions—including a 55° cutting angle and 4.76 mm thickness—help to keep changeover times short and spare-part logistics simple. With fewer special adapters required, machine uptime is improved and stocking becomes more predictable, supporting leaner toolroom management and faster response to production changes. Application scope and machining recommendations The insert is optimised for external and internal turning of medium to heavy Stahl workpieces, where a combination of toughness and wear resistance is needed. The 0.8 mm corner radius offers a compromise between edge strength and profile accuracy, suitable for general-purpose roughing and finishing passes under variable cutting conditions. Select the insert's chipbreaker style and grade to match the workpiece material, machining stability and feed range for best results. For supply or application advice on the Tungaloy DNMG110408 T9225 turning insert, contact Metav Werkzeuge for personalised recommendations or immediate availability; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6780620 Manufacturer SKU: TUN6780620 SKU: 6780620-Tungaloy Grade: T9225 Material: carbide Facts ISO designation: DNMG110408 Corner radius: 0.8 mm Insert size: 11 mm Thickness: 4.76 mm Relief angle: 0° Cutting angle: 55° Hole style: cylindrical hole Special features CVD-coated grade Double-sided chipbreaker Rhombic insert shape With cylindrical hole for secure clamping Suitable for external and internal turning FAQ What applications is this insert designed for? The DNMG110408 T9225 turning insert is intended for external and internal turning, optimised for medium to heavy Stahl machining and situations with intermittent cuts. How does the T9225 grade improve tool life? The T9225 CVD-coated carbide combines wear resistance and toughness, which reduces flank and crater wear under higher temperatures and improves resistance to interrupted cutting, extending tool life. Is this insert compatible with standard ISO holders? Yes; the insert follows ISO DNMG110408 dimensions and is suitable for standard ISO turning holders when form, relief angle and clamping method are matched. Which features influence chip control and surface finish? The double-sided chipbreaker and the rhombic geometry of the DNMG110408 help control chip formation, improving evacuation and contributing to a more consistent surface finish. Can the DNMG110408 be used for finishing passes? With its 0.8 mm corner radius and robust grade, the insert can be used for general finishing and roughing; selection of feed and depth should be adapted to the workpiece condition and machine stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated T9225 grade with a double-sided chipbreaker and a 55° rhombic geometry, this insert provides robust, repeatable performance for medium to heavy steel turning; the 0.8 mm corner radius supports predictable edge engagement and chip control. Order the DNMG 110408 T9225 directly via Metav Werkzeuge or consult our advisors for application support. DNMG 110408 T9225 — ISO turning insert, rhombic 55°, Tungaloy A DNMG110408 T9225 insert designed for ISO-standard external and internal turning, offering a universal, tough grade for mixed and interrupted cuts in steel. CVD-coated carbide grade T9225 Suitable for medium to heavy steel machining Double-sided chipbreaker, corner radius 0.8 mm Rhombic DNMG 11 mm, 55° cutting angle Stable cutting performance for demanding steel operations The CVD-coated T9225 carbide offers a blend of toughness and wear resistance, engineered for medium to heavy machining where cutting conditions change or interruptions occur. The robust grade reduces edge chipping and prolongs useful life under variable engagement, promoting consistent cycle times and fewer tool changes. By selecting an appropriate chipbreaker and matching the insert to the workpiece stability, the toolset supports efficient, economical production with predictable component quality. Geometry and clamping designed for repeatability Built to ISO geometry, the rhombic DNMG shape with a 55° cutting angle and a corner radius of 0.8 mm ensures reliable corner strength and favourable cutting forces. The insert includes a cylindrical hole and a 4.76 mm thickness, which together provide secure location and simple indexing in compatible holders. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness; when these match, clamping is secure and runout is minimised, improving surface finish and reducing vibration-related wear. Efficient inventory and handling benefits As a double-sided insert, each component offers two cutting edges, lowering per-edge cost and simplifying spare-part stocking. The universal nature of the grade and chipbreaker reduces the number of different inserts required for mixed steel work, aiding toolroom organisation and faster changeovers. Because the system comprises ISO inserts, a matched external holder or boring bar, underlay/clamp set and replacement screws, maintenance is straightforward and predictable, supporting uninterrupted machining cycles. Practical application advice and material suitability Specifically intended for turning, this insert is best applied to external and internal steel operations where a balance of toughness and wear resistance is required. The CVD-coated carbide substrate performs well under interrupted cuts and varying engagement typical of roughing and medium-depth finishing passes. Selection of cutting parameters and the correct chipbreaker is essential to harness the grade’s benefits; choosing the right combination will improve metal removal rates and tool life while maintaining component accuracy. For productive, reliable turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for procurement and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780644 Manufacturer SKU: TUN6780644 Our SKU: 6780644-Tungaloy Model series: ISO turning inserts Application: Turning Facts Inscribed circle (IC): 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Cutting angle: 55° Special features Grade: T9225, CVD-coated carbide Double-sided chipbreaker Rhombic DNMG geometry Cylindrical hole ISO-standard insert for external and internal turning FAQ What materials is this insert intended for? The insert is intended primarily for steel turning; the T9225 CVD-coated carbide grade is engineered for medium to heavy steel machining and benefits interrupted or variable cutting conditions. How does the insert locate in the holder? Location requires a holder that matches the DNMG form: correct relief angle, tolerance class, fastening method, size and thickness ensure secure clamping and repeatable positioning for the insert. Is this insert reversible or single-use per side? This is a double-sided insert; each index provides additional cutting edges, reducing tooling costs and simplifying stock management. Which chipbreaker should be selected for finishing? The chipbreaker choice depends on workpiece material and cut stability; the available double-sided chipbreaker on this grade supports a range of finishing and roughing strategies when matched to the application. What system components are needed to assemble the cutting system? A complete system comprises the ISO insert, a compatible external holder or boring bar, an underlay/clamp set and replacement screws as required for secure fastening. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of robust CVD-coated carbide and a 55° rhombic geometry to ensure stable chip control and extended tool life in medium-to-heavy turning operations. The design with a 0.8 mm corner radius and a cylindrical hole provides secure clamping and mechanical strength for interrupted cuts. Order the DNMG110408 T9225 turning insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. DNMG110408 T9225 — Tungaloy ISO turning insert for turning The DNMG110408 T9225 Tungaloy turning insert is an ISO-standard, rhombic indexable insert engineered for medium-to-heavy steel turning where toughness and reproducible performance are required. CVD-coated carbide grade T9225 Designed for medium to heavy steel turning 55° rhombic geometry, 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole for clamping Reliable productivity for medium-to-heavy turning The combination of a CVD-coated surface and a robust universal grade (T9225) offers predictable wear behaviour under changing engagement conditions. The coating increases thermal and abrasive resistance, which results in reduced flank wear and longer in-process life compared with uncoated grades. This translates into fewer insert changes and improved machine uptime, particularly during demanding external and internal turning tasks. The geometry is optimised for a balance between strength and surface finish, making the insert suitable for productive roughing and consistent semi-finishing operations. Secure clamping and straightforward holder compatibility As an ISO-standard indexable insert, mechanical compatibility with toolholders is determined by form, relief angle, tolerance class, clamping method, size and thickness. The cylindrical hole and matching relief specification ensure a secure, repeatable clamp engagement, reducing the risk of vibration-induced wear. The double-sided chipbreaker allows the insert to be indexed to fresh cutting edges, extending usable life and simplifying inventory management. Selection of the correct chipbreaker and grade depending on workpiece stability and cutting parameters will yield the best compromise between tool life and cycle times. Practical guidance on application and coating benefits The Tungaloy T9225 grade is a CVD-coated carbide designed for steel machining where intermittent cuts or variable depth of cut demand additional toughness. The 55° rhombic plate form with a 0° relief angle provides mechanical rigidity, while the 0.8 mm corner radius offers a durable cutting edge that withstands heavier engagements without sacrificing surface quality. In practice, the coating reduces adhesive wear and improves performance at elevated cutting speeds; pairing the insert with an appropriate coolant strategy and stable fixturing will deliver repeatable results and economical machining cycles. Choose the Tungaloy T9225 grade for reliable mid-to-heavy steel turning — contact Metav Werkzeuge for application advice or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6780626 Manufacturer SKU: TUN6780626 SKU: 6780626-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Core data Corner radius: 0.8 mm Included angle: 55° Size: 11 mm Relief angle: 0° Hole: cylindrical Special features Grade: T9225 (CVD-coated carbide) Double-sided chipbreaker Rhombic plate form (55°) ISO-standard turning insert With cylindrical hole for secure clamping Suitable for medium to heavy steel turning FAQ What materials is the DNMG110408 T9225 designed for? The DNMG110408 T9225 Tungaloy turning insert is optimised for medium-to-heavy steel machining and offers a balance of toughness and wear resistance suitable for variable engagement conditions. Will this insert fit standard ISO DNMG holders? Compatibility follows ISO conventions: form, relief angle, tolerance class, clamping method, size and thickness determine fit; the DNMG110408 conforms to ISO dimensions and uses a cylindrical hole for secure clamping. What are the main advantages of the T9225 CVD coating? The CVD-coated T9225 grade improves thermal and abrasive wear resistance, lowering flank wear rates and allowing more consistent cutting performance at higher speeds compared with uncoated carbide. Is the insert suitable for interrupted cuts or unstable conditions? Yes, the robust universal characteristics of the T9225 grade and the insert’s geometry provide enhanced toughness for partially interrupted or fluctuating cuts encountered in heavy turning operations. How does the 0.8 mm corner radius affect the machining result? A 0.8 mm corner radius offers a compromise between edge strength and surface finish, improving edge life in heavy engagements while still delivering acceptable surface quality for many turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade and the ISO DNMG form for consistent, cost-effective turning in medium to heavy Stahl applications; the reversible, double-sided design reduces tooling costs while ensuring reliable performance under interrupted cuts. Order directly via Metav Werkzeuge or consult the team for application support. DNMG110408 T9225 Turning insert, CVD-coated carbide by Tungaloy A DNMG110408 T9225 turning insert engineered for medium to heavy Stahl turning, offering toughness for variable engagement and secure locating with a cylindrical hole DNMG110408 rhombic insert, 55° cutting angle CVD-coated carbide grade T9225 for Stahl 0° clearance with cylindrical locating hole 0.8 mm corner radius, double-sided chipbreaker Consistent cutting performance for productive Stahl turning The CVD-coated carbide in grade T9225 delivers a balanced combination of wear resistance and impact strength, specially formulated for Stahl removal under changing engagement and slightly interrupted cuts. The coating improves thermal stability at the cutting edge, extending tool life and reducing unplanned tool changes; fewer interventions mean higher machine uptime and a more economical production rhythm. With a 55° rhombic geometry and a corner radius 0.8 mm, the insert promotes stable cutting forces and a reliable surface finish in external and internal turning operations. Secure clamping and simple system compatibility for process reliability Compatibility with the toolholder is defined by form, clearance angle, tolerance class, fastening method, size and thickness, enabling repeatable seating and clamping. The insert’s cylindrical hole and double-sided chipbreaker allow reversible use and straightforward indexing, cutting tooling costs per part. The system approach — ISO insert, appropriate external holder or boring bar, shim/clamping set and replacement screws — ensures process consistency: once the correct holder and clamping parts are selected, the insert functions predictably across batches and setups, supporting stable production runs. Practical advantages and recommended applications for workshops and lathes This grade is a robust universal solution for shops needing flexibility: it suits medium to heavy Stahl machining where changing engagement or light interruptions occur. The rhombic DNMG form offers versatility for a range of turning tasks, while the CVD-coated surface and carbide substrate provide durable edges and consistent performance. For CNC and manual lathes alike, the insert reduces setup complexity and contributes to repeatable part quality, making it a sound choice for production, maintenance and jobbing environments that value both productivity and reliability. For reliable mid-to-heavy Stahl turning applications, choose Tungaloy DNMG110408 T9225 inserts and contact Metav Werkzeuge for precise application advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6944647 Manufacturer SKU: TUN6944647 SKU: 6944647-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG110408 Grade: T9225 Material: carbide Shape: rhombic Facts Corner radius: 0.8 mm Cutting angle: 55° Clearance (relief) angle: 0° Plate size: 11 Hole: with cylindrical hole Special features CVD-coated carbide Double-sided chipbreaker ISO-compliant DNMG form Reversible indexing for cost-effectiveness Suitable for external and internal turning System components: insert, holder, shim/clamping set, replacement screws FAQ What materials is this insert intended for? The DNMG110408 T9225 insert is specified for medium to heavy Stahl machining; the T9225 grade and CVD-coated carbide substrate are optimised for such applications and for slightly interrupted cuts. How does the insert reduce tooling costs in production? Thanks to its double-sided chipbreaker and reversible indexing, the DNMG110408 T9225 insert allows two cutting edges per face, increasing usable life and lowering cost per part in serial turning operations. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; use a matching external holder or boring bar designed for DNMG110408 geometry to ensure secure locating via the cylindrical hole. Is this insert suitable for interrupted cuts and variable engagement? Yes, the T9225 grade was developed for robustness under changing engagement and light interruptions, offering a good balance of toughness and wear resistance. What system components are recommended with the insert? A complete system includes the ISO insert, an appropriate external holder or boring bar, a shim/clamping set and replacement screws to secure repeatable seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Benefit from a CVD-coated carbide grade that combines robust performance in medium to heavy steel turning with a repeatable rhombic 55° geometry and economical double-sided use; order or request advice via Metav Werkzeuge for fast, professional support. DNMG110408 T9225 — Tungaloy indexable insert for turning, CVD-coated carbide, rhombic 55° A DNMG110408 T9225 indexable insert designed for ISO-standard turning, optimised for medium to heavy steel machining and compatible with matching ISO holders. CVD-coated carbide for long tool life Universal T9225 grade for steel machining Rhombic 55° geometry, 0.8 mm corner radius Double-sided insert with cylindrical hole Increased productivity for medium to heavy steel turning The combination of CVD-coated carbide and the T9225 grade provides a balance of wear resistance and toughness that supports stable cutting under variable engagement. As an indexable insert, it is engineered to maintain a consistent cutting edge life even with intermittent cuts, which reduces downtime for regrinding and replacement. The robust grade helps to preserve dimensional accuracy and surface quality over longer tool life, improving overall process economy and throughput in shop-floor turning operations. Clear compatibility and straightforward mounting for consistent results Designed as an ISO-standard insert, the plate’s performance depends on correct matching with the holder: form, relief angle, tolerance class, fastening method, size and thickness must align. The rhombic geometry with a cylindrical hole suits common clamping systems and the double-sided chipbreaker enables economical, reversible use. The 0° rake angle offers a neutral cutting action that supports stable chip formation when machining steels, simplifying tool selection and reducing setup variation between shifts or machines. Practical application guidance for effective cutting strategies For external and internal turning of medium to heavy steel, the insert’s 0.8 mm corner radius helps balance edge strength with surface finish demands; a modest feed will exploit the radius for better contouring and repeatability. The double-sided format and ISO compatibility make the insert a cost-efficient choice where batch sizes and varied engagement depths require adaptable tooling. Choose a matching chipbreaker and grade according to part rigidity and interruption level to achieve consistent chip control and extended cutting-edge performance. Contact Metav Werkzeuge for application-specific advice and procurement of Tungaloy inserts—email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed support and fast delivery Technical Data Article number: 6780851 Manufacturer SKU: TUN6780851 SKU: 6780851-Tungaloy Designation: DNMG110408 T9225 Tungaloy indexable insert Manufacturer: Tungaloy Material: Carbide (Hartmetall) Dimensions & Key values Size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 55° Hole style: cylindrical hole Features & Application Grade: T9225 Coating: CVD-coated carbide Chipbreaker: double-sided Shape: rhombic Application: Turning (external and internal) System: ISO indexable insert Compatibility: determined by holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is the DNMG110408 T9225 best suited for? The DNMG110408 T9225 insert is optimised for medium to heavy steel machining and performs well under slightly interrupted cuts where toughness is required. How many usable cutting edges does this indexable insert provide? The DNMG110408 T9225 is double-sided, offering multiple indexed edges to maximise tool-life economy before replacement. Which holders are compatible with this insert? Compatibility depends on the holder matching the insert form, relief angle, tolerance class, fastening method, size and thickness; the DNMG110408 follows ISO standards for common external and internal turning holders. What are the key geometry values to consider for cutting data? Pay attention to the 0.8 mm corner radius, 55° included angle and 0° relief angle when selecting feeds and depths of cut for the DNMG110408 T9225 to balance finish and edge strength. How does the T9225 grade affect machining performance? The T9225 grade provides a robust, universal balance of wear resistance and toughness, enabling productive turning of steels with good chip control and reliable cutting-edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated cemented carbide T9225 and the rhombic 55° DNMG geometry for robust, repeatable steel turning; the combination of toughness and chip control reduces downtime and improves process stability. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. DNMG 110408 T9225 Turning Insert (Iso 110408) for Turning — Tungaloy DNMG110408 T9225 Tungaloy insert for ISO‑standard turning applications, designed for medium to heavy steel machining with a robust, CVD‑coated cemented carbide grade. CVD‑coated cemented carbide grade T9225 Universal for medium to heavy steel turning Rhombic 55° geometry for versatile applications 0° clearance with double‑sided chipbreaker 11 mm inscribed circle, corner radius 0.8 mm Durable grade for mixed and interrupted cuts The CVD‑coated cemented carbide grade T9225 is formulated for medium to heavy steel turning, combining wear resistance with enhanced toughness. This balance of properties makes the insert particularly suited to variable engagement conditions and light interruption, where a purely wear‑optimised grade might chip. In practical terms, the grade increases tool life under fluctuating loads and contributes to stable chip formation, which reduces unplanned tool changes and supports consistent production throughput. Geometry that optimises versatility and clamping stability The rhombic DNMG geometry with a 55° orientation provides a versatile approach to external and internal turning tasks. The insert’s 0° clearance and double‑sided chipbreaker allow two usable cutting edges per face, improving economy and reducing tooling costs per component. The presence of a cylindrical hole and standard ISO form ensures compatibility with a wide range of ISO‑compliant holders; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness, so matching with the correct seat and clamping set is essential for repeatable performance. Measurable benefits on typical steel operations With an 11 mm inscribed circle, corner radius 0.8 mm and 4.76 mm thickness, the insert delivers a reliable balance between edge strength and accessibility for small‑to‑medium diameters. The geometry and grade combination supports higher metal removal rates in stable set‑ups and improves surface finish in finishing passes when compared to less robust grades. Selecting this insert within a matched system — holder, shim/ clamp set and replacement screws — reduces vibration and delivers predictable tool life, which in turn lowers unit manufacturing cost through fewer interruptions. Simple handling, clear system requirements As part of an ISO turning insert system, the item integrates into the standard workflow: indexable insert, appropriate external holder or boring bar, underpinning shim/clamp kit and spare fastening screws. The CVD coating protects the cutting edge at elevated temperatures and during continuous cuts, while the double‑sided chipbreaker helps maintain chip control without complex parameter changes. For customers unsure about holder compatibility or cutting data, technical guidance is available to ensure the insert is matched to material, cut depth and machine dynamics. Contact Metav Werkzeuge today for application‑matched holders and cutting data to maximise the benefits of the Tungaloy DNMG110408 T9225 insert Technical data Article number: 6787107 SKU (manufacturer): TUN6787107 Model series: ISO turning indexable inserts Material: cemented carbide Coating: CVD Grade: T9225 Core specifications Geometry: DNMG110408 (rhombic, 55°) Inscribed circle: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Design & features Chipbreaker: double‑sided Hole: with cylindrical hole Application: turning (external and internal) Typical use: medium to heavy steel machining FAQ What materials is this insert intended for? The DNMG110408 T9225 insert is intended primarily for steel machining; the T9225 grade is a robust universal choice for medium to heavy operations and variable engagement conditions. How is the DNMG110408 geometrically identified? The geometry is a rhombic DNMG with a 55° lead angle, 11 mm inscribed circle and 0.8 mm corner radius; this makes it suitable for a wide range of turning tasks. Can this insert be used in interrupted cuts? Yes. The T9225 grade and the insert’s toughness are designed to tolerate light interruptions and fluctuating cutting conditions with reduced risk of edge chipping. How many cutting edges are available per insert? The insert features a double‑sided chipbreaker and two usable faces per side, providing multiple indexable edges and extended economy per insert. Which SKU should be ordered to ensure correct identification? Order using the manufacturer SKU TUN6787107 or article number 6787107 to ensure the correct DNMG110408 T9225 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Combining the T9225 CVD-coated cemented carbide with a rhombic ISO geometry yields dependable wear resistance and consistent chip control for medium to heavy turning operations; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. DNMG 110408 T9225 — ISO turning insert by Tungaloy DNMG 110408 T9225 is an ISO-standard rhombic indexable insert for external and internal turning, engineered for robust performance in interrupted and variable steel cutting conditions. CVD-coated carbide grade T9225 Universal for medium to heavy steel Rhombic 55° form, 0° clearance Cylindrical hole for secure clamping Durable grade for tougher steel operations The T9225 grade is a CVD-coated cemented carbide developed as a robust universal choice for turning steel under changing engagement conditions. Its composition balances hardness and toughness, so the insert resists wear while tolerating light interruptions without premature chipping. For production environments where tool life and process stability matter, this indexable insert reduces unplanned tool changes and supports predictable cycle times. Geometry that improves reliability and handling The rhombic 55° geometry combined with a 0° clearance angle provides a compact, versatile cutting edge that is suitable for both external and internal turning. The 0.8 mm corner radius supports stronger edge strength for heavier feeds, while the double-sided design makes effective use of the insert area. These geometric choices mean fewer toolholders and a simpler tooling inventory, which enhances shop-floor efficiency and simplifies setup routines. Secure mounting and consistent chip control A cylindrical hole with corresponding clamping systems ensures repeatable seating and axial stability during machining. The insert’s double-sided chipbreaker design contributes to predictable chip formation and evacuation when machining medium to heavy sections. Together, these features reduce vibration risk and improve surface finish, translating into lower rework rates and enhanced overall productivity. Choosing this insert for process reliability For turning applications that require a balance between economy and performance, the CVD coating and robust grade deliver longer tool life and steady cutting behaviour. Selecting the right chipbreaker and matching the insert to the holder tolerance and clamping method ensures optimal results. If further cutting data or compatibility checks are required, Metav Werkzeuge’s technical team can recommend holder types and cutting parameters based on the intended material mix and machining strategy. Contact Metav Werkzeuge for tailored recommendations on Tungaloy T9225 inserts and to arrange an application review with our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6966141 Manufacturer SKU: TUN6966141 Label: DNMG110408 T9225 Tungaloy-Wendeplatte Material: cemented carbide Model series: ISO turning inserts Facts Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 55° Special features Grade: T9225 Coating: CVD Shape: rhombic (DNMG) Hole: cylindrical, with hole Chipbreaker: double-sided Typical application: external and internal turning; designed for medium to heavy steel machining ISO designation: DNMG110408 FAQ What materials is this insert suited for? The Tungaloy DNMG 110408 T9225 insert is optimised for medium to heavy steel machining and performs well under variable engagement and lightly interrupted cuts. Is the insert double-sided and reversible? Yes, the insert features a double-sided configuration and a double-sided chipbreaker, enabling economical use of both cutting edges before replacement. Which holder features are required for secure clamping? Holders that match the rhombic DNMG form with a cylindrical clamp interface and compatible tolerance class are recommended to ensure correct seating and repeatable stability for this insert. Can the grade withstand interrupted cuts? The T9225 grade offers increased toughness for changing engagement conditions and light interruptions, providing improved resistance to chipping compared with harder, more brittle grades. What is the manufacturer article number and SKU? Manufacturer article number 6966141, manufacturer SKU TUN6966141, listed as DNMG110408 T9225 by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of the robust combination of a CVD-coated carbide grade (T9225) and the rhombic 55° geometry for dependable medium to heavy steel turning; technical compatibility with ISO holders ensures straightforward integration. Order directly via Metav Werkzeuge or request tailored advice from their consultants for optimal tool selection. DNMG110408 T9225 indexable insert for turning — CVD-coated carbide, rhombic 55° by Tungaloy DNMG110408 T9225 is an ISO-standard indexable insert designed for general turning applications in industrial machining, offering a balance of toughness and wear resistance for variable cutting conditions. CVD-coated carbide grade T9225 Rhombic DNMG 55° geometry 0.8 mm corner radius Double-sided insert with cylindrical hole Consistent cutting performance with robust carbide and coating The combination of a CVD-coated surface and a carbide substrate in grade T9225 delivers a dependable mix of wear resistance and fracture toughness for medium to heavy turning. The coating reduces abrasive and adhesive wear during extended contact with workpieces, while the substrate provides the necessary toughness for slightly interrupted cuts. This blend results in stable cutting forces and predictable tool life, which supports steady cycle times and fewer unexpected tool changes on the shop floor. Geometry-driven productivity and surface finish improvement The rhombic 55° geometry and 0.8 mm corner radius optimise chip formation and edge engagement for external and internal turning tasks. The insert’s geometry, together with the double-sided chipbreaker, encourages consistent chip shapes and evacuation, reducing the risk of chip entanglement and improving surface finish. Because the insert conforms to ISO specifications, it is suitable for a wide range of ISO-compatible holders and mounting systems, enabling quick tool replacement and minimal setup time. Shop-floor compatibility and application versatility Designed for turning operations, the insert supports a broad material range when paired with the appropriate chipbreaker and cutting parameters; it is particularly well suited to various grades of steel under moderate to heavy cutting conditions. Compatibility with holders is determined by form, relief angle, tolerance class, clamping method, size and thickness, so selecting a matching ISO holder and the correct clamping hardware ensures secure seating and repeatable accuracy. The presence of a cylindrical mounting hole facilitates reliable fixation and easy indexing for extended use. Contact Metav Werkzeuge for application-specific recommendations and availability of the Tungaloy DNMG110408 T9225 indexable insert Technical data Article number: 6966169 Manufacturer SKU: TUN6966169 Seller SKU: 6966169-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG110408 T9225 Core dimensions and figures Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief (free) angle: 0° Cutting edge angle: 55° Hole: with hole (cylindrical) Double-sided: yes Features and applications Material: cemented carbide Coating: CVD Grade: T9225 Shape: rhombic (55°) Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO-standard insert; holder compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ Which materials are suitable for this insert? The DNMG110408 T9225 insert is formulated for robust performance in a range of steels; the T9225 grade and CVD coating provide resistance to wear and good edge stability for medium to heavy steel machining. Is this insert suitable for interrupted cuts or variable engagement? Yes, the carbide substrate and the tougher T9225 grade make the insert tolerant of slightly interrupted cuts and changing engagement conditions typical in many turning operations. How does the insert mount to a holder? The insert uses a cylindrical centre hole for clamping; secure seating depends on matching the insert’s form, thickness and tolerance to an ISO-compatible holder and correct clamping hardware. Can the insert be indexed to use multiple cutting edges? The DNMG110408 is double-sided and indexable, allowing rotation to a fresh cutting edge when the active edge reaches end of life, extending usable time per insert. What performance benefits does the CVD coating provide? The CVD coating reduces abrasive wear and improves thermal resistance at the cutting edge, contributing to longer tool life and more consistent surface quality in demanding turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a tough CVD-coated grade, ISO conformity and a compact 55° rhombic geometry for consistent medium to heavy steel turning; order the insert directly via Metav Werkzeuge or consult our cutting-tool specialists for selection and holder compatibility. DNMG 110408 T9225 turning insert — CVD-coated carbide, 55° rhombic, Tungaloy The DNMG 110408 T9225 is a CVD-coated, double-sided turning insert designed for medium to heavy-duty turning applications where interrupted cuts or variable engagement demand enhanced toughness and reliable chip control. CVD-coated carbide grade T9225 Robust universal grade for medium to heavy steel ISO DNMG rhombic insert, 55° cutting angle Double-sided with cylindrical hole Faster, more consistent metal removal for steel turning The combination of a CVD-coated surface and a tough cemented carbide substrate delivers a pragmatic balance between wear resistance and fracture toughness. This insert is intended for productive steel machining where changing engagement or slightly interrupted cuts occur; the T9225 grade supports extended cutting intervals and stable performance under such conditions. Compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness, so selection should follow the established ISO match between the insert and the chosen external holder or boring bar. The rhombic geometry with a defined 55° cutting angle helps maintain cutting force distribution and supports predictable chip formation. Predictable tool life and reliable surface finish The insert’s geometry and the double-sided chipbreaker design aid chip control while preserving the cutting edge, which reduces unplanned tool changes and improves process economy. A 0.8 mm radius at the cutting edge increases edge strength for heavier cuts and contributes to consistent surface integrity on the workpiece. The modest 4.76 mm thickness and standard 11 mm size ensure mechanical stability when clamped correctly in a matching ISO DNMG holder; the central cylindrical hole grants secure fixation and straightforward indexing. These features combine to lengthen effective tool life and cut-cycle reliability, which is particularly valuable in serial production and job-shop environments. System integration and practical recommendations The insert forms part of a system: the ISO turning insert, a suitable external holder or boring bar, a shim/clamping kit and replacement screws are the recommended assembly for safe and repeatable use. The DNMG110408 is double-sided and indexable, enabling two cutting edges per side and economical utilisation of the insert geometry. For best results, pair the T9225 grade with a chipbreaker that matches the workpiece material and the machining stability—this balances surface finish and removal rates while managing heat and chip evacuation. Selection of speeds and feeds should reflect the material class and machine condition to exploit the grade’s strength without overloading the cutting edge. For reliable medium-to-heavy steel turning, request Tungaloy DNMG 110408 T9225 from Metav Werkzeuge or contact our technical advisers at Metav Werkzeuge for holder compatibility and application-specific recommendations: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6780952 SKU: 6780952-Tungaloy Manufacturer SKU: TUN6780952 Model series: ISO-Drehwendeschneidplatten Designation: DNMG110408 Grade: T9225 Core data Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 55° Relief (clearance) angle: 0° Features and compatibility Material: cemented carbide Coating: CVD Shape: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) System components: insert, holder or boring bar, shim/clamping kit, replacement screws FAQ What materials is this insert suited for? The T9225 grade and CVD-coated carbide substrate are optimised for steel machining, providing a robust compromise between wear resistance and toughness for medium to heavy-duty turning. How is the insert mounted and indexed? The insert uses a central cylindrical hole for secure clamping in compatible ISO DNMG holders and is double-sided and indexable to allow multiple cutting edges before replacement. Which holder attributes must be matched to the insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; ensure the chosen holder or boring bar matches these ISO parameters. Does the insert perform well with interrupted cuts? Yes, the T9225 grade is formulated for situations with variable engagement or light interruptions, offering increased toughness to reduce the risk of chipping. Is the geometry suitable for finishing or roughing operations? The 0.8 mm radius and robust grade make the insert versatile; it is best used for medium to heavy cutting where edge strength is required, while finer radii would be preferable for high-precision finishing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a tough T9235 CVD-coated carbide grade, ISO-compliant DNMG geometry and a double-sided chipbreaker for reliable turning under interrupted and unstable conditions; order the inserts directly via Metav Werkzeuge or consult the specialists for selection and stocking. DNMG 110408 T9235 indexable turning insert for turning – Tungaloy A DNMG 110408 T9235 indexable insert engineered for robust steel turning, offering a tough CVD-coated carbide grade and ISO rhombic geometry for unstable or interrupted cuts. DNMG 110408 geometry for versatile turning Grade T9235 CVD-coated for tough steel cuts Double-sided chipbreaker for easy indexing Cylindrical-hole fastening for secure clamping Consistent cutting performance from a tough CVD-coated carbide The combination of a CVD-coated carbide substrate and the T9235 specification delivers a balance of toughness and wear resistance suited to machining steel where vibration or interrupted cuts occur. The coating improves resistance to abrasive wear while the substrate maintains edge integrity in less stable setups, resulting in longer tool life and fewer unplanned exchanges. Compatibility with ISO-standard holders ensures predictable behaviour across established tool systems, enabling planners to rely on measured component life and reduced process variability. Practical design that reduces tool changes and improves clamping security A double-sided chipbreaker provides two indexed cutting edges per seat, doubling usable edge count and reducing downtime for replacements. The rhombic ISO plate with a cylindrical hole and 4.76 mm thickness gives secure clamping and repeatable positioning in standard clamps; the 0.8 mm corner radius smooths entry and improves corner strength while the 55° included angle helps maintain chip flow and access in external and internal turning. These mechanical details translate into fewer toolholders required in stock and lower changeover frequency on busy production lines. Application guidance and system considerations for dependable results Select the chipbreaker and grade according to material, stability and machining style: the T9235 grade is recommended for turning of steel at moderate speeds, in situations with stronger interruption or limited rigidity. The ISO-system setup typically comprises the insert, a matching outer holder or boring bar, a shim/clamp set and spare mounting screws; compatibility is determined by form, clearance angle, tolerance class, fastening and plate thickness. For milling-free adaptation to existing toolrooms, choose holders that match the DNMG geometry to preserve run-out and clamping force, ensuring consistent surface finish and repeatable tool life. For application advice or to reserve stock of Tungaloy DNMG 110408 T9235 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical support and ordering assistance. Technical Data Manufacturer article number: 6785982 SKU: 6785982-Tungaloy Manufacturer SKU: TUN6785982 Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade: T9235 Coating: CVD-coated Shape: rhombic With hole: cylindrical hole Chipbreaker: double-sided Application: Turning Core specifications Radius: 0.8 mm Included angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 11 mm ISO designation: 110408 Features and applications ISO-standard indexable insert (DNMG) Tough grade for steel, suitable for unstable or interrupted cuts Compatible with ISO holders when form, clearance and tolerance match Double-sided chipbreaker for extended edge life System components: insert, outer holder/boring bar, shim/clamp set, spare screws Rhombic plate form for external and internal turning applications FAQ What materials is this insert suitable for? The Tungaloy DNMG 110408 T9235 insert is specified for steel machining and performs well in interrupted or less rigid conditions where a tough CVD-coated carbide is advantageous. How does the T9235 grade behave under interrupted cuts? The T9235 grade combines toughness with wear resistance, reducing chipping risk and maintaining edge life during interrupted turning operations with variable cutting forces. How many cutting edges are available per insert? Owing to the double-sided chipbreaker and standard DNMG indexing, the insert provides multiple usable edges; this extends service life before replacement is required. What holder compatibility must be checked before fitting the insert? Compatibility depends on the insert form, clearance (frewinkel), tolerance class, fastening method, size and thickness—ensure the holder matches the DNMG 110408 geometry and uses a suitable clamp and screw arrangement. Is the insert reversible or single-use per side? The DNMG 110408 T9235 is double-sided and indexable; when one cutting edge is worn, the plate can be rotated or flipped according to the holder’s clamp design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com