DNMG 110408 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear-resistant coated cermet grade and ISO‑standard geometry to improve surface finish and tool life in stable turning operations; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and cutting-data selection. DNMG110408 GT9530 indexable turning insert — coated cermet, 55° rhombic (Tungaloy) A DNMG110408 GT9530 indexable insert for turning, designed to deliver wear resistance and consistent finish in finishing to light general-purpose steel machining. DNMG 110408 geometry, 55° rhombic insert Coated cermet grade GT9530 for finishing Double-sided insert with cylindrical hole Optimised for stable turning of steel Increased cutting performance with coated cermet technology The coated cermet grade GT9530 combines a wear‑resistant composition with a functional coating to extend tool life under stable cutting conditions. This turning insert offers a 55° rhombic geometry that promotes reliable engagement for both external and internal turning, while the 0° clearance angle supports predictable cutting forces. The result is improved surface quality on steel components and fewer index changes, which contributes to steadier cycle times and reduced overall machining cost. Practical advantages for production and setup Designed as a double‑sided ISO insert with a cylindrical hole, the component allows fast, repeatable clamping with standard external holders or boring bars. The 0.8 mm corner radius balances edge strength and fine finishing capability, making this insert suitable for finishing passes where a smooth surface is required without sacrificing edge life. Using the correct chipbreaker and grade for the workpiece material helps to maintain consistent chip formation and decreases the likelihood of rework. Compatibility guidance and system overview The insert is part of an ISO insert system: the ISO designation reflects standard dimensions and tolerances, so compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness. Typical system components include an ISO indexable insert, a matching external holder or boring bar, a clamp or locating pad, and spare screws. For stable turning of steel, select a holder that minimises vibration and pair the insert with the appropriate chipbreaker type to achieve the desired surface finish and tool life. For tailored technical advice on integrating Tungaloy turning inserts into a production line or to request the DNMG110408 GT9530 for specific applications, contact Metav Werkzeuge by email or phone — consultants can advise on holder compatibility, cutting data and chip control Technical Data Article number: 6710244 SKU: 6710244-Tungaloy Manufacturer SKU: TUN6710244 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DNMG110408 GT9530 Core data Insert angle: 55° Corner radius: 0.8 mm Size: 11 Clearance angle: 0° Special features Coating: GT9530 (coated cermet) Material: carbide Chipbreaker: double-sided Hole style: cylindrical hole Shape: rhombic Application: turning; finishing to light universal work on steel FAQ What holder types are compatible with this insert? The DNMG110408 GT9530 indexable insert is compatible with ISO‑standard external holders and boring bars that accept DNMG geometry; compatibility depends on form, fastening, tolerance class and insert thickness. For which materials is the GT9530 grade recommended? The GT9530 coated cermet grade is intended for steel machining where a wear‑resistant finishing to light universal performance is needed under stable conditions. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius provides a balance between edge strength and a fine surface finish; it helps to achieve improved surface quality while maintaining adequate edge durability for finishing cuts. Is the insert reversible, and how many cutting edges are available? This is a double‑sided insert with a cylindrical hole; when indexable, both sides can be used, allowing multiple cutting edges before disposal. What system components are needed to assemble this insert for turning? A complete setup typically requires an ISO indexable insert (DNMG110408 GT9530), a matching external holder or boring bar, a clamp or locating pad and appropriate screws for secure fastening. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 GT9530 Wendeplatten - Tungaloy
Consistent finishing and extended tool life from the GT9530 coated cermet, combined with ISO compatibility and secure locating, reduce downtime and ensure repeatable turning results; order original items through Metav Werkzeuge or consult our technical advisers for application support. DNMG 110408 GT9530 Tungaloy turning insert — ISO rhombic grade for precise finishing in turning A DNMG110408 GT9530 Tungaloy insert designed for external and internal turning with a 55° rhombic geometry and a fine corner radius for high‑quality surface requirements *ISO-compliant rhombic turning insert *Coated cermet grade GT9530 for finishing *Double‑sided with cylindrical locating hole *55° cutting angle, 0° rake, 0.8 mm corner radius Consistent finish and longer tool life for finishing turns The coated GT9530 is a cermet grade optimised for finishing to achieve a superior surface finish on steel under stable machining conditions. The coating stabilises the cutting edge and reduces flank wear, which translates into fewer interruptions for tool change and more consistent part quality. For planners and production engineers, this means predictable cycle times and less scrap; the combination of a cermet substrate and surface coating gives a balance between hardness and toughness that favours finishing cuts while extending overall service life. Reliable geometry and fit for secure clamping Built to ISO dimensions, the insert’s rhombic shape and standardised form ensure compatibility with a wide range of holders; fit is governed by insert form, clearance angle, tolerance class, screw type, size and thickness. The cylindrical locating hole allows positive positioning and repeatable clamping, reducing the chance of misalignment during indexing. Clear reference values such as the 55° cutting angle and 4.76 mm thickness make setup verification straightforward and support fast changeover routines in mixed‑tooling environments. Design elements that reduce setup time and improve stability A double‑sided construction offers two usable cutting edges per index, increasing cost efficiency per cutting edge. The 0.8 mm corner radius moderates edge strength and contributes to improved surface integrity on the workpiece; a larger radius absorbs vibration but can increase cutting forces, while a small radius is preferred for fine finishing—this insert strikes a practical compromise. The 0° rake angle provides neutral chip flow suited to stable turning operations; together these features reduce the need for frequent trial adjustments and help maintain consistent process parameters. Application guidance: where this grade performs best This grade is intended for turning operations on steel where a high‑quality finish and extended tool life are required under stable conditions. Typical uses include external diameter finishing and internal turning where light to moderate material removal is needed. Selecting the correct chipbreaker and matching the grade to machine rigidity and workpiece clamping will secure the best outcomes; when stability is ensured, the coated cermet excels at delivering repeatable surface quality and predictable wear behaviour. For application advice or to obtain genuine Tungaloy inserts for production, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will advise on the right grade and holder compatibility. Technical Data Article number: 6998084-Tungaloy Manufacturer SKU: TUN6998084 Manufacturer article number: 6998084 Model series: ISO-Drehwendeschneidplatten Designation: DNMG110408 GT9530 Tungaloy-Wendeplatte Facts Cutting angle: 55° Rake angle: 0° Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle/size: 11 Special features Material: cemented carbide (carbide) Grade/coating: GT9530 (coated cermet) Geometry: rhombic, double‑sided Hole style: cylindrical locating hole Typical application: turning (external and internal) Chipbreaker: double‑sided FAQ What machining operations is this insert designed for? This insert is intended for turning operations — both external and internal — where finishing quality and extended edge life are priorities; the geometry and grade suit light to moderate cuts in steel. How does the GT9530 grade affect performance? The GT9530 coated cermet provides enhanced wear resistance and is optimised for finishing, which helps maintain a consistent surface finish and reduces the frequency of insert changes compared with uncoated grades. Is the DNMG110408 compatible with standard ISO holders? Yes — the DNMG110408 follows ISO dimensions; compatibility depends on form, clearance angle, tolerance class, screw fixation, size and thickness, so matching those parameters ensures correct fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 GT9530 Wendeplatten - Tungaloy
Take advantage of the coated cermet GT9530 and the 0.8 mm corner radius in a robust ISO DNMG geometry to achieve consistently fine surface finishes and longer tool life under stable turning conditions; order the insert directly via Metav Werkzeuge or consult the in‑house specialists for application advice. DNMG 110408 GT9530 Turning Insert by Tungaloy — Coated Cermet, Rhombic 55° DNMG110408 GT9530 Tungaloy-Wendeplatte is an ISO‑standard indexable insert for general and finishing turning applications on steel Coated cermet grade GT9530 Optimised for finishing and light turning Rhombic DNMG 55° geometry Double-sided chipbreaker, 0.8 mm radius Engineered for consistent finishing and longer life The GT9530 coated cermet composition combines a wear‑resistant cutting surface with a substrate engineered for stability, providing excellent surface finish in finishing and light general turning of steel. The combination of the coating and substrate reduces flank wear under steady cutting conditions, which translates into fewer insert changes and more productive machine time. The 55° rhombic geometry supports narrow cutting engagement and steady chip flow, helping to preserve dimensional accuracy on external and internal profiles. Clear guidance on holder compatibility and system setup This indexable insert conforms to ISO dimensions and requires matching of form, clearance angle, tolerance class, attachment method, size and thickness for correct seating. The insert fits into standard DNMG‑compatible holders or boring bars provided the holder accepts a DNMG110408 plate with a cylindrical hole and 11 mm inscribed circle. Selection of the appropriate chipbreaker and grade should be based on workpiece material, machining strategy and machine rigidity to ensure optimal performance and process reliability. Geometry and cutting parameters explained for the workshop The rhombic DNMG shape with a 55° principal cutting angle suits medium to light turning where a compromise between strength and accessibility is required. The 0° clearance angle and 0.8 mm corner radius support fine surface quality while enabling stable finishing passes; the double‑sided layout allows indexing to a fresh edge, offering economy per insert. The 11 mm inscribed circle is a common standard size permitting rapid replacement and predictable clamping behaviour in compatible toolholders. Productivity benefits and proven manufacturer pedigree By pairing a coated cermet grade with DNMG geometry, the insert reduces downtime through extended edge life and contributes to lower overall machining costs in stable setups. The stable chip formation and the focus on finishing performance make this insert a sound choice where surface quality and repeatability are priorities. Backed by Tungaloy’s engineering approach, the product aligns with well‑established expectations for consistent cutting performance in production environments. Contact Metav Werkzeuge for tailored application support on the GT9530 grade and to confirm holder compatibility via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6797220 SKU: 6797220-Tungaloy Manufacturer SKU: TUN6797220 Model series: ISO-Drehwendeschneidplatten Name: DNMG110408 GT9530 Tungaloy-Wendeplatte Brand: Tungaloy Facts Geometry angle: 55° Inscribed circle: 11 mm Corner radius: 0.8 mm Clearance angle: 0° ISO code: 110408 Special features Coated cermet GT9530 Material: cemented carbide Rhombic insert shape Double-sided chipbreaker Cylindrical hole Application: Turning FAQ Which materials is the DNMG110408 GT9530 suitable for? The DNMG110408 GT9530 Tungaloy insert is optimised for steel finishing and light general turning, offering good surface quality and extended tool life in stable machining conditions. How is compatibility with a toolholder ensured? Compatibility depends on the holder accepting the DNMG110408 form, matching the clearance angle, tolerance class, attachment method, size (11 mm inscribed circle) and thickness for proper seating and clamping. What advantages does the GT9530 cermet grade provide? GT9530 provides enhanced wear resistance and a finely finished cutting edge for prolonged finishing operations, reducing frequency of insert changes in continuous production. Can the insert be indexed and what is the benefit? Yes — the insert is double‑sided and indexed via its cylindrical hole, allowing rotation to a fresh cutting edge to extend usable life per insert and maintain process uptime. What does the 0.8 mm corner radius mean for achievable surface finish? A 0.8 mm corner radius balances edge strength with fine finish capability; it supports smooth cutting in finishing passes while resisting premature chipping on intermittent cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 cermet finishing grade and the rhombic DNMG geometry to achieve finer surface finishes and stable, repeatable results; order genuine inserts via Metav Werkzeuge or consult our tooling specialists for holder compatibility and application advice. DNMG 110408 NS9530 Tungaloy indexable turning insert – cermet finishing, 55° DNMG110408 NS9530 Tungaloy-Wendeplatte is an ISO-standard indexable insert for precision external and internal turning, optimised as a finishing grade for steel components. Cermet finishing grade NS9530 Sharp edge for superior surface finish ISO DNMG geometry, 55° cutting angle Double-sided chipbreaker, cylindrical hole Achieve superior surface quality with a cermet finishing grade The NS9530 grade is an uncoated cermet developed for low cutting forces and a very sharp cutting edge, making it ideal for finishing operations on steel under continuous cutting conditions and small depths of cut. Cermet materials combine a ceramic matrix with metallic binders to offer excellent wear resistance while maintaining edge sharpness; the result is a noticeably improved surface finish and reduced need for secondary machining. For production environments where consistent part appearance and tight tolerances matter, this finishing insert supports reliable process outputs and fewer rework cycles. Reliable fit and clamping for repeatable turning results Manufactured to ISO standards, the rhombic DNMG shape with a 55° cutting geometry and a 0° clearance angle ensures predictable engagement with compatible holders. Compatibility is determined by a combination of form, clearance angle, tolerance class, clamping method, size and thickness, so correct holder selection is essential for stability and tool life. The insert features a cylindrical hole for secure fastening and a thickness of 4.76 mm, providing the mechanical support required for consistent repeatability in batch production. Specifying the correct holder and clamping set-up reduces vibration and contributes directly to dimensional accuracy. Improved chip control and economical finishing performance The insert’s double-sided chipbreaker promotes controlled chip formation during continuous cuts, easing chip evacuation and protecting the workpiece surface. A corner radius of 0.8 mm balances edge strength with finishing capability, delivering a stable cutting edge that minimises micro-chatter while preserving a fine surface texture. Using an uncoated cermet for finishing delivers lower friction at the cutting edge and resistance to abrasive wear, which together support longer effective life in finishing cycles and more predictable replacement intervals — an economic benefit in high-volume turning operations. Practical application notes for turning steels Designed primarily for turning applications on steel, this insert is best applied where continuous cutting and small depths of cut are typical. Choose the appropriate chipbreaker and grade variant to match workpiece material, required surface quality and machine/fixture rigidity. For internal and external turning, ensure the selected holder matches the DNMG form factor and the insert’s dimensions: size 11 with a plate thickness of 4.76 mm and a 0.8 mm corner radius. Where machining conditions are less stable or interrupted, consider alternative grades or cutting parameters to avoid edge chipping and preserve the sharp cermet cutting profile. For genuine Tungaloy NS9530 DNMG110408 inserts and expert tooling advice, contact Metav Werkzeuge to confirm holder compatibility and application recommendations. Technical data Article number: 6797240 Manufacturer SKU: TUN6797240 SKU: 6797240-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Core data Insert designation: 110408 Insert form: DNMG (rhombic, 55°) Corner radius: 0.8 mm Thickness: 4.76 mm Size: 11 Clearance angle: 0° Hole style: cylindrical Special features Grade: NS9530 Schneidstofftyp: uncoated cermet Application: finishing for steel Chipbreaker: double-sided For: external and internal turning ISO-standard indexable insert FAQ What materials is this insert designed for? The DNMG110408 NS9530 insert is formulated as a finishing grade for steel; the NS9530 cermet excels in continuous cutting and small depths of cut on steel workpieces. How does the corner radius affect performance? A 0.8 mm corner radius provides a balance between edge strength and surface quality, helping to maintain a sharp edge while reducing the risk of chipping during finishing passes. Is this insert compatible with standard DNMG holders? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and plate thickness; check these parameters against the DNMG110408 dimensions before use. What benefits does the uncoated cermet bring compared with coated carbide? Uncoated cermet like NS9530 offers superior edge sharpness and low cutting forces for finishing operations, resulting in improved surface finish and predictable wear in continuous cuts. Can this insert be used for both internal and external turning? Yes, the insert is suitable for both external and internal turning when paired with an appropriate holder and correct machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 NS9530 Wendeplatten - Tungaloy
Combine cost-effective uncoated cermet performance with a sharp cutting edge and ISO compatibility for reliable finishing operations; order the insert directly via Metav Werkzeuge or consult our advisors for application support. DNMG 110408 NS9530 — Indexable turning insert, finishing grade, Tungaloy The DNMG110408 NS9530 is an ISO-standard indexable insert designed for precision turning and finishing of steel components in robust production environments. ISO rhombic DNMG form, 55° cutting angle Uncoated cermet NS9530 finishing grade 0.8 mm corner radius for fine surface finish Double-sided insert with cylindrical hole High-quality finishing with reduced cutting forces The DNMG110408 insert delivers consistent surface quality thanks to the NS9530 uncoated cermet composition, which provides a sharp cutting edge and low cutting forces ideal for continuous cuts and small depths of cut. The combination of the grade and geometry reduces the tendency for built-up edge and supports tighter dimensional tolerances. For operations that prioritise surface finish over aggressive metal removal, this indexable insert offers a reliable balance between tool life and final part quality, especially when paired with a compatible rigid fixturing system. Seamless ISO compatibility for holder systems Made to ISO dimensions, the rhombic DNMG shape and 55° approach angle ensure straightforward integration into standard turning holders and boring bars. Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; these parameters match common industrial holders so changeover is efficient and predictable. The double-sided design increases usable edges per insert, while the cylindrical hole provides secure clamping and repeatable positioning, reducing setup time and improving process stability. Enhanced productivity through material and geometry The uncoated cermet cutting material of this grade is optimised for finishing steel, offering excellent edge sharpness and consistent wear behaviour under continuous cutting conditions. The 0.8 mm corner radius balances edge strength with the ability to produce fine surface finishes, reducing the need for secondary operations. Where machining stability is assured, the insert’s geometry supports higher feed rates for finishing passes, shortening cycle times without compromising part quality. Practical guidance for selection and use Choose the appropriate chipbreaker and grade to match workpiece rigidity, cutting parameters and the intended finish; the NS9530 grade is intended as a finishing sort for steels with low cutting forces and sharp edge performance. The indexable plate is compatible with holders specified for DNMG 110408 geometry and thickness of 4.76 mm; ensure coolant strategy and clamping torque align with the machine tool supplier recommendations to achieve repeatable results. For specialist applications or mixed-material batches, consult product data sheets to confirm optimal cutting parameters and wear monitoring intervals for the best balance of productivity and tool life. The DNMG110408 insert from Tungaloy is particularly suited where consistent surface integrity and predictable tool behaviour are priorities. For tailored recommendations on Tungaloy finishing inserts and availability, contact Metav Werkzeuge for application advice and fast delivery options Technical data Article number: 6998160 Manufacturer SKU: TUN6998160 Model series: ISO-Drehwendeschneidplatten Facts Angle: 55° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 mm Hole style: cylindrical hole Special features Uncoated cermet NS9530 Rhombic plate form (DNMG) Double-sided design ISO-standard turning insert Suitable for finishing steel applications Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The DNMG110408 NS9530 insert is designed primarily for finishing operations on steel; the NS9530 uncoated cermet provides a sharp edge and low cutting forces suited to continuous cutting. How many usable edges does the insert provide? Thanks to the double-sided design, the insert provides multiple usable cutting edges, extending the service life before replacement is required. Which holders are compatible with this insert? ISO-compatible DNMG holders and boring bars that accept a rhombic 11 mm DNMG 110408 dimension and 4.76 mm thickness are suitable; compatibility depends on form, clearance and fastening. Is this insert coated or uncoated? The insert is an uncoated cermet grade (NS9530), chosen for finishing steel with a sharp cutting edge and fine surface results. What is the purpose of the cylindrical hole? The cylindrical hole enables secure and repeatable clamping in standard insert seats, improving positional stability and reducing the risk of movement under cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, uncoated cermet cutting edge (NS9530) and a 55° ISO DNMG form for consistent finishing performance; the insert’s double-sided chipbreaker and cylindrical hole ensure secure clamping and straightforward replacement. Order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. DNMG110408 NS9530 — Tungaloy indexable turning insert for finishing (turning) The DNMG110408 NS9530 is an ISO-format indexable turning insert designed for precision finishing of steel components, offering a sharp cutting edge, low cutting forces and excellent surface quality. Uncoated cermet NS9530 for fine finishing Sharp cutting edge for low cutting forces ISO DNMG 110408 rhombic insert, 55° lead angle Double-sided chipbreaker with cylindrical hole Optimised finishing performance for steel The insert is a finish-grade uncoated cermet developed to deliver a consistently superior surface on steel components. The NS9530 grade provides a very sharp cutting edge that reduces radial cutting forces, which in turn lowers the tendency for part deformation and vibration during light, continuous cuts. For production environments where repeatable surface quality and dimensional stability are priorities, this specification supports shorter finishing cycles and less downstream rework. The material choice—cemented carbide backing with a cermet cutting layer—combines edge strength with fine wear resistance, helping to maintain form and finish over multiple indexings. Straightforward integration with ISO tooling systems Compatibility with existing toolholders is governed by standardised characteristics: the rhombic DNMG 110408 form, 55° lead angle, 0° relief, plate thickness and fastening method. The insert features a cylindrical hole for secure clamping and a double-sided chipbreaker, enabling two usable cutting corners and predictable chip control in finishing cuts. Specifying this insert makes integration into established ISO DNMG holder systems simple and reliable, reducing setup time and inventory complexity for production shops that maintain ISO tooling families. Process reliability and efficiency in the turning centre Operational advantages focus on efficiency and predictable tool life: the insert’s geometry and cutting-edge integrity support low cutting forces, which lowers spindle load and can permit higher feedrates for equivalent finish targets. The double-sided design provides cost-effective reuse of the indexable corners, while the uncoated cermet surface is particularly effective in continuous cutting operations and small depths of cut where minimal burr formation and superior surface roughness are required. For manufacturers seeking stable, repeatable finishing with minimal adjustments, this combination delivers measurable process gains. Practical selection and recommended use Choose the DNMG110408 NS9530 when the application demands high surface quality on steel with small material removal per pass. The insert is optimised for continuous cuts and light finishing passes; it is less suited to heavy interrupted cuts or large depth-of-cut roughing operations. When selecting, match the insert to a compatible DNMG holder by checking form, relief angle, tolerance class, fastening method, size and thickness. Keeping a small stock of replacement screws and clamping sets simplifies changeovers and minimises downtime in production. For tailored machining recommendations or to procure the DNMG110408 NS9530 insert from Tungaloy, contact Metav Werkzeuge for expert advice and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6797219 SKU: 6797219-Tungaloy Manufacturer SKU: TUN6797219 Model series: ISO indexable turning inserts Material: Cemented carbide Facts ISO code: 110408 Form: DNMG (rhombic), 55° lead angle Corner radius: 0.8 mm Size: 11 Relief angle: 0° Special features Grade: NS9530 (uncoated cermet) Finish-grade insert for steel machining Double-sided chipbreaker Cylindrical clamping hole Compatible with standard DNMG holders; system includes holder, underlay/clamping set and replacement screws FAQ Which materials is this insert intended for? The DNMG110408 NS9530 is a finish-grade uncoated cermet optimised for machining steel in continuous finishing operations and small depths of cut. Is the insert compatible with conventional DNMG holders? Yes; compatibility depends on matching the DNMG form, lead angle, size, thickness and fastening method—this insert conforms to the ISO DNMG 110408 specification for straightforward use in standard holders. How many edges are usable before disposal? The insert is double-sided with two usable cutting edges per face; indexing provides multiple fresh edges until the tool reaches wear limits or edge damage. What chip control does the insert provide? Equipped with a double-sided chipbreaker, the insert delivers controlled chip formation for finishing cuts; the cylindrical hole supports secure clamping and stable cutting conditions. Which cutting conditions are recommended for best surface finish? For optimal results use light depths of cut with steady feed in continuous cutting; the sharp edge of the NS9530 grade reduces cutting forces and helps achieve a fine surface without excessive burr formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 NS9530 Wendeplatten - Tungaloy
Take advantage of a finely balanced combination of sharp cermet cutting performance and ISO-compatible indexability to boost finishing productivity and reduce rework. Request further guidance or order the insert directly via Metav Werkzeuge for seamless integration into existing turning tool systems. DNMG 110408 NS9530 Tungaloy Turning Insert — ISO-indexable finishing insert for turning DNMG110408 NS9530 Tungaloy is an ISO-indexable turning insert optimised for fine finishing of steel components in continuous external and internal turning operations ISO-indexable DNMG form, rhombic geometry Cermet grade NS9530 for fine finishing Sharp cutting edge for low cutting forces Double-sided insert, 0° clearance Achieve consistent high-quality finishes with a low-force cutting grade The uncoated cermet grade NS9530 was developed for finishing applications where surface integrity and dimensional consistency are decisive. The sharp edge geometry reduces friction and produces low cutting forces, which leads to smaller form deviations and minimises chatter on less rigid setups. For continuous cuts and small depths of cut, this characteristic shortens cycle times by reducing the need for secondary operations while improving the first-pass finish. Fast fit-up and secure clamping for reliable production Manufactured to ISO dimensions and tolerances, the rhombic DNMG shape with a cylindrical hole ensures predictable compatibility with standard external holders and boring bars. The insert is double-sided, allowing economical index changes, and the plate thickness 4.76 mm together with the 0° clearance create a stable seat in the pocket. The corner radius 0.8 mm gives a balance between edge strength and fine surface generation, supporting shorter set-up times and dependable repeatability across production batches. Broad applicability in turning with a focus on productivity Designed primarily for turning applications, the grade is particularly suited to finishing of steels where continuous cutting and modest chip loads prevail. The combination of cermet chemistry and a sharp cutting edge promotes excellent surface finish while maintaining reasonable tool life in steady-state conditions. Selecting the appropriate chipbreaker and matching the grade to the workpiece stability and feed conditions will optimise cutting performance and throughput. If there is any uncertainty about whether this insert meets specific requirements, or if additional technical data is needed, Metav Werkzeuge can provide application advice and compatibility checks — including holder matching and recommended cutting parameters. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Contact Metav Werkzeuge today to discuss integrating the DNMG 110408 NS9530 Tungaloy turning insert into production or to request tailored application support Technical data Article number: 6998171 SKU: 6998171-Tungaloy Manufacturer article number: 6998171 Manufacturer SKU: TUN6998171 Data Shape designation: DNMG110408 Size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included hole: with hole (cylindrical) Insert angle: 55° Special features Material: carbide Grade: uncoated cermet NS9530 Geometry: rhombic, double-sided Chipbreaker: double-sided Typical system build: ISO insert, suitable external holder or boring bar, shim/clamping set, replacement screws FAQ What cutting applications suit this insert best? The DNMG 110408 NS9530 Tungaloy turning insert is intended for finishing operations on steel, especially continuous external and internal turning where a fine surface finish and low cutting forces are required. Is the insert compatible with standard DNMG holders? Yes. The insert conforms to ISO DNMG dimensions; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness — standard DNMG holders will accept this designation. How does the NS9530 grade affect tool life and finish? NS9530 is an uncoated cermet grade optimised for high surface finish and low cutting forces; it typically delivers excellent finish quality in continuous finishing cuts while providing reasonable wear resistance under stable conditions. Can the insert be indexed to use a second cutting edge? Yes. The double-sided design allows rotation to a fresh edge, extending the usable life of each insert and improving cost-efficiency for batch production. What is the recommended corner radius for fine finishing? The 0.8 mm corner radius on this insert is a compromise between edge strength and the ability to generate a fine surface; it is well suited to finishing passes with modest feed rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of high-precision finishing, consistent tool life and ISO compatibility to streamline production. The uncoated NS9530 cermet offers low cutting forces and excellent surface quality, while the double-sided, indexable geometry reduces running costs and changeover time. Order or advise via Metav Werkzeuge for exact holder matching and availability. DNMG110408 NS9530 Tungaloy turning insert (55°, 0.8 mm radius) The DNMG110408 NS9530 Tungaloy is an ISO-standard rhombic turning insert designed for finishing operations in steel, offering a fine cutting edge and compatibility with common ISO holders. ISO rhombic insert, 55° cutting angle Uncoated cermet grade NS9530 for fine finishing 0.8 mm corner radius for high surface quality Double-sided design with cylindrical hole for secure clamping High-precision finishing for steel components The DNMG110408 NS9530 insert is a finishing-grade solution based on the uncoated cermet NS9530, engineered for continuous cuts and small depth-of-cut operations. The combination of a sharp cutting edge and a 0.8 mm corner radius produces low cutting forces and an improved surface finish, reducing downstream grinding or polishing. Cermet grades are chosen for finishing because their ceramic-rich microstructure delivers wear resistance and edge retention while maintaining ductile fracture behaviour on many steels, resulting in consistent part geometry and repeatable results. Stable geometry and reliable clamping for consistent results An ISO-standard geometry and rhombic form ensure straightforward integration into matching toolholders; compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness. The insert’s 55° cutting angle balances radial stability and accessibility to shoulders, while the 0° relief angle provides full-contact support in compatible holders to enhance rigidity. The cylindrical hole and double-sided design enable secure fastening and two usable cutting edges per orientation, lowering cost per cutting edge and simplifying inventory management. Practical gains for workshop productivity In daily turning operations the indexable design reduces downtimes associated with grinding or regrinding inserts, and the NS9530 grade promotes longer intervals between changes for finishing passes. Selecting the appropriate chipbreaker and matching the grade to component stability and machining type is essential; the combination of a finishing cermet and the insert’s geometry supports reliable, high-quality parts and fewer reworks. For system setups remember that a complete tooling solution comprises the insert, a compatible external holder or boring bar, a shim/clamp set and replacement screws to guarantee correct seating and repeatable clamping. Contact Metav Werkzeuge for tailored advice on holder compatibility and to order the DNMG110408 NS9530 insert (info@metav-werkzeuge.com | +49 2822 7131930) Technical Data Article number: 6708383 Manufacturer SKU: TUN6708383 SKU: 6708383-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 0° Plate size: 11 mm Special features Uncoated cermet grade NS9530 Rhombic plate form Cylindrical hole (with hole) Double-sided chipbreaker ISO-standard turning insert Material designation provided as hardmetal/cermet mix in specification FAQ What materials is this insert suited for? The DNMG110408 NS9530 insert is formulated as a finishing uncoated cermet grade for machining steel and related alloys where a fine surface finish and low cutting forces are required. Is this insert compatible with standard ISO holders? Yes, the geometry follows ISO standards; compatibility with a given holder depends on form, relief angle, tolerance class, clamping method, size and thickness, so matching those parameters to the DNMG110408 is recommended. How does the 0.8 mm corner radius affect part finish? A 0.8 mm corner radius on the DNMG110408 helps produce a smoother surface and better edge strength during finishing passes, especially on continuous cuts and small depths of cut. How many usable cutting edges does the insert provide? The insert is double-sided and indexable; each side offers usable cutting edges according to the plate geometry, effectively extending tool life before replacement. Which chipbreaker should be selected for general finishing? Choose a chipbreaker and sort that match workpiece material, cutting type and machine stability; for the DNMG110408 NS9530 a finishing-style breaker is advised to support small feeds and continuous cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 NS9530 Wendeplatten - Tungaloy
Achieve superior surface finish and reduced cutting forces with the uncoated cermet NS9530 in a 55° DNMG geometry; ISO compatibility ensures predictable holder matching and straightforward indexing. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. DNMG110408 NS9530 – ISO turning insert, uncoated cermet, Tungaloy The DNMG110408 NS9530 is an ISO-standard turning indexable insert engineered for finishing operations in steel with a sharp cutting edge and low cutting forces Finishing-grade uncoated cermet NS9530 DNMG rhombic geometry, 55° cutting angle 0° clearance for precise edge engagement Double-sided with cylindrical hole for clamping Consistent finishing with low cutting forces The uncoated NS9530 grade is tailored as a finishing sort that delivers a sharp cutting edge, low cutting forces and a high surface finish in continuous cutting and small depths of cut. The combination of the DNMG rhombic geometry and the fine corner radius helps to reduce vibration and chatter, which directly improves process stability and repeatable results. This technical setup is especially effective when fine tolerances and excellent surface quality are required. Predictable setup thanks to ISO compatibility As an ISO-standard insert, the plate fits holders when the form, clearance angle, tolerance class, fastening and thickness match. Compatibility is therefore determined by measurable parameters rather than guesswork, which shortens tool changeover and reduces setup time. The system is completed by the appropriate external holder or boring bar, backing pads and clamping sets; this predictable assembly supports a steady production flow and simplifies tool inventory management. Secure clamping and repeatable indexing The plate is double-sided, contains a cylindrical hole for positive clamping and a compact plate thickness of 4.76 mm, which ensures repeatable positioning after index changes. The 0.8 mm corner radius balances edge strength with finishing capability, while the 0° clearance provides controlled engagement for precise material removal. These mechanical features translate into fewer regrinds and consistent component quality over batch runs. Application guidance for material and process selection Designed primarily for finishing of steel, the grade is best applied in continuous cuts and light passes; matching the chipbreaker and the insert grade to the workpiece material and stability of the setup is essential. Select a rigid holder and verify cutting data for small depths of cut to exploit the grade’s strengths: surface integrity and minimal cutting forces. For complex mixes of workpieces or uncertain machining parameters, consult technical data to choose the correct chipbreaker and holder combination. For precision finishing with Tungaloy NS9530, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for stock information and tailored technical advice. Technical data Article number: 6998166 Manufacturer SKU: TUN6998166 SKU: 6998166-Tungaloy Model series: ISO turning indexable inserts Product designation: DNMG110408 NS9530 Tungaloy‑insert Facts Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 11 mm Special features Uncoated cermet NS9530 Double-sided with cylindrical hole Rhombic DNMG geometry Finishing grade for steel Double-sided chipbreaker FAQ What applications is this insert designed for? The DNMG110408 NS9530 insert is intended for finishing turning operations in steel, offering a sharp cutting edge and high surface quality. How does the DNMG geometry affect performance? The DNMG rhombic geometry with a 55° cutting angle provides a balance between accessibility and edge strength, supporting consistent finishing results. Is the insert indexable and how is it clamped? Yes, the plate is double-sided and features a cylindrical hole for secure clamping and repeatable indexing. Which materials suit the NS9530 grade best? The NS9530 grade is optimised for steel finishing under continuous cutting and small depths of cut to achieve low cutting forces and good surface finish. What should be considered when pairing the insert with a holder? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening, size and thickness; matching these parameters ensures reliable assembly and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing, low cutting forces and reliable chip control for consistent component quality; order this insert via Metav Werkzeuge or consult our specialists for application support. DNMG 110408 NS9530 Tungaloy turning insert — rhombic ISO finishing insert, 55° cutting geometry A DNMG110408 NS9530 cermet turning insert engineered for finishing steel components with a sharp cutting edge and optimised chip control in continuous cuts ISO rhombic insert DNMG110408, 55° angle Uncoated cermet NS9530 for finishing steel Sharp cutting edge with low cutting forces Double-sided chipbreaker, with cylindrical hole Consistent high-quality finishing with low cutting forces The uncoated NS9530 grade is developed for exceptional surface quality in finishing operations on steel, combining a sharp edge geometry with a tailored substrate. This results in low cutting forces and reduced heat generation, which preserves component geometry and minimises secondary operations. The result is a more predictable process and fewer reworks when producing precision shafts, journals or close-tolerance turned faces. Stable process behaviour and controlled chip formation Equipped with a double-sided chipbreaker, the insert supports continuous cutting conditions and small depths of cut where uninterrupted chip control is crucial. The rhombic 55° geometry gives a balance between cutting action and strength of the cutting edge, enhancing both stability and tool life. In practice, this translates into fewer interruptions, steadier cycle times and improved surface consistency across production batches. Designed for straightforward mounting and secure seating Compatibility with the toolholder is defined by form, clearance angle, tolerance class, fastening and thickness. The insert comes with a cylindrical hole and a standard thickness of 4.76 mm, ensuring positive location and secure clamping in ISO-compliant turning holders. Clear specification of form and dimensions simplifies tool selection and reduces setup time on the shop floor, supporting uninterrupted machining cycles. Precision geometry for fine finishing demands The rhombic shape with a nominal 0.8 mm corner radius delivers a fine blend of edge strength and small-radius capability for tight surface finishes. The 0° clearance angle and 55° main cutting angle are well suited to finishing passes where dimensional fidelity and surface integrity are priorities. As an indexable solution, the insert offers quick edge changes and consistent repeatability across multiple batches. For precision finishing with proven cermet performance, contact Metav Werkzeuge for application advice and ordering—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944625 Manufacturer SKU: TUN6944625 SKU: 6944625-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle / size: 11 mm Thickness: 4.76 mm Cutting geometry angle: 55° Clearance angle: 0° Corner radius: 0.8 mm Special features Grade: uncoated cermet NS9530 Intended application: finishing (turning) of steel Plate form: rhombic (DNMG) Chipbreaker: double-sided Hole style: cylindrical hole Compatibility: ISO turning holders and boring bars FAQ What machining tasks is this insert intended for? This insert is intended for finishing turning operations on steel; the NS9530 cermet grade is optimised for continuous cuts and fine surface finish. How does the NS9530 grade affect performance? The NS9530 uncoated cermet offers a sharp cutting edge and low cutting forces, improving surface quality and reducing heat in finishing passes. Which holders are compatible with this geometry? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; the DNMG110408 format fits standard ISO rhombic turning holders. How many cutting edges are available per insert? The insert is double-sided with indexed edges, allowing multiple repositions before replacement, which supports cost-effective finishing. What are the key dimensions to check during setup? Check the inscribed circle (11 mm), thickness (4.76 mm), corner radius (0.8 mm) and the 55° cutting angle to ensure proper seating and cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 NS9530 Wendeplatten - Tungaloy
Data conflict detected: the field "material" lists Hartmetall (carbide) while the cutting-material information specifies an uncoated cermet, which indicates a discrepancy that could lead to inaccuracies in the final output; therefore, it is essential to carefully verify the product data, cross-checking all relevant details and ensuring consistency across all fields before proceeding to generate the product description to avoid potential errors or miscommunication regarding the material specifications and to maintain the integrity and reliability of the information provided to end users or stakeholders.
DNMG 110408 T5105 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T5105 grade and the DNMG110408 ISO form for reliable, high-speed turning of cast iron; the rhombic 55° geometry and double-sided construction ensure efficient indexation and predictable tool life. Order the DNMG110408 T5105 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG110408 T5105 DNMG turning insert — Tungaloy, CVD-coated carbide, 55° DNMG110408 T5105 is an ISO-standard rhombic insert engineered for turning applications, optimised for high-speed machining of cast iron in stable setups. CVD-coated T5105 grade Rhombic 55° geometry Double-sided with central hole Consistent high-speed performance for cast iron turning The T5105 grade is a CVD-coated carbide developed for wear resistance during sustained high cutting speeds. As an indexable insert in the DNMG family, this item delivers stable chip formation and extended edge life when used under appropriate machine and clamping conditions. The coating reduces flank wear and the substrate maintains edge strength, which together enable predictable performance and fewer unscheduled changes. For production environments aiming to reduce downtime, the combination of coated carbide and robust geometry translates into improved process efficiency and repeatable surface quality. Easy compatibility and predictable handling with ISO form Supplied to ISO dimensions, the DNMG110408 format simplifies tool selection and inventory management across conventional toolholders. Compatibility with a holder depends on the insert’s form, clearance angle, tolerance class, fixing method, size and thickness, so the ISO designation ensures straightforward matching to holders and borings. The rhombic 55° shape and central cylindrical hole support quick indexing and reliable clamping, while the double-sided design doubles usable edges, lowering cost per edge and reducing replacement frequency in batch runs. Practical benefits that increase productivity and process security The geometry and grade combination delivers two clear benefits: first, longer intervals between edge changes due to wear-resistant coating, and second, consistent part finish thanks to the stable cutting edge. In practice, this means fewer interruptions for insert changes and a more consistent output quality in turning operations on cast iron. The insert is most effective when paired with stable tooling and correct chipbreaker selection for the specific workpiece material; choosing the chipbreaker and grade appropriate to the machining type enhances chip control and surface results while protecting the toolholder and machine spindle. For specification, availability or tailored application advice on the DNMG110408 T5105 insert from Tungaloy, contact Metav Werkzeuge for expert guidance and rapid delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852959 Manufacturer SKU: TUN6852959 SKU: 6852959-Tungaloy Model series: ISO turning indexable inserts Core data ISO code: 110408 Size (inscribed circle): 11 mm Thickness: 4.76 mm Included angle: 55° Corner radius: 0.8 mm Clearance angle: 0° Design and features Rhombic insert form (DNMG) Double-sided with central cylindrical hole CVD-coated carbide, grade T5105 Chipbreaker: double-sided Application: turning (high-speed machining of cast iron under stable conditions) Compatibility: dependent on form, clearance angle, tolerance, fixing, size and thickness FAQ What materials is this insert best suited for? The DNMG110408 T5105 insert is optimised for machining cast iron; the T5105 CVD-coated carbide offers wear resistance at elevated cutting speeds suitable for stable turning operations. How does the DNMG110408 geometry affect cutting performance? The rhombic 55° geometry provides a balanced approach to strength and versatility; it enables good surface finish and reliable chip control, while the double-sided format increases the number of usable edges. Is the insert compatible with standard DNMG holders? Yes. The DNMG110408 conforms to ISO dimensions; compatibility with a holder depends on matching form, clearance angle, tolerance class, fixing method, size and thickness to the holder specifications. What advantages does the T5105 coating provide? The T5105 coating reduces flank wear and improves abrasion resistance during high-speed turning, resulting in longer tool life and more consistent part quality with the DNMG insert. How many edges are usable on this insert? The insert is double-sided, so it provides multiple indexing positions; the exact number of usable cutting edges depends on the insert orientation and chipbreaker design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade T5115, a rhombic DNMG110408 form and precise geometry for consistent chip control and extended edge life; order via Metav Werkzeuge or request application advice from our consultants. DNMG110408 T5115 DNMG 110408 Turning insert by Tungaloy — CVD-coated carbide, rhombic 55° DNMG110408 T5115 Tungaloy insert designed for ISO‑standard turning applications, optimised for cast‑iron machining with stable cutting edges and predictable chip formation CVD-coated carbide grade T5115 for cast iron Double-sided chipbreaker for reliable chip control Rhombic 55° geometry with 0° clearance angle Cylindrical hole and 4.76 mm plate thickness Reliable performance for cast‑iron turning The CVD‑coated carbide composition of this insert, assigned to grade T5115, is tuned for a balanced combination of wear resistance and edge stability in cast‑iron applications. The coating applied by chemical vapour deposition forms a hard, adherent layer that reduces abrasive wear and increases heat resistance during interrupted cuts. As a result, machining cycles become more predictable and tool indexing intervals lengthen, supporting a steady production flow when using ISO‑compliant holders and the correct clamping components. Predictable chips and secure mounting reduce downtime A double‑sided chipbreaker combined with the rhombic geometry and a 55° lead angle enables controlled chip formation and evacuation, especially in medium to heavy interrupted turning operations. The insert is supplied with a cylindrical hole for positive location and repeatable clamping; the 4.76 mm plate thickness and 0.8 mm corner radius contribute to stable seating and resistance to edge chipping. These features translate into fewer unplanned stoppages and consistent surface finishes when the insert is paired with a compatible holder and correct tolerance class. Economical machining through longer life and easy integration Designed as part of an ISO turning insert system, this indexable solution supports both external and internal turning by allowing quick index changes and reuse of the remaining cutting edges. The combination of the T5115 grade and robust geometry pays off through reduced tool consumption and less frequent regrinding. Selecting the appropriate chipbreaker and holder according to workpiece stability and machining method ensures the best balance between productivity and surface quality, making this insert a practical choice for process‑focused workshops. For application advice or stock availability of the Tungaloy DNMG110408 T5115 insert, contact Metav Werkzeuge for tailored recommendations and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6852960 SKU: 6852960-Tungaloy Manufacturer SKU: TUN6852960 Name: DNMG110408 T5115 Tungaloy‑Wendeplatte Series: ISO‑Drehwendeschneidplatten Facts Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Lead/angle: 55° Clearance angle: 0° Hole: with hole (cylindrical) Special features Material: carbide Coating: CVD‑coated (grade T5115) Geometry: rhombic, double‑sided chipbreaker Typical application: turning (external and internal) Compatibility: determined by form, clearance angle, tolerance class, attachment, size and thickness FAQ Which materials is this insert best suited for? The DNMG110408 T5115 insert from Tungaloy is a universal grade optimised for cast‑iron machining, providing a balanced compromise between wear resistance and edge stability. Can this insert be used for both external and internal turning? Yes, the ISO‑format DNMG110408 indexable insert is suitable for external and internal turning when mounted in a compatible holder and matched with the appropriate chipbreaker and clamping set. How does the CVD coating improve tool life? The CVD‑coated carbide of the T5115 grade increases surface hardness and oxidation resistance, which helps to reduce abrasive wear and extend edge life under typical cast‑iron cutting conditions. What are the key dimensions to check for holder compatibility? Check the plate size (11 mm), plate thickness (4.76 mm), hole style (cylindrical) and the rhombic form with 55° lead angle to ensure correct fit and clamping in the chosen holder. Is the insert reversible or indexable? The insert is double‑sided and indexable, allowing multiple edges to be used before replacement, which supports economical tooling strategies. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 T5125 Wendeplatten - Tungaloy
Take advantage of a tough, CVD-coated carbide grade and ISO-consistent geometry for predictable turning results; the combination of robust edge stability, a 0.8 mm corner radius and simple holder compatibility supports continuous production. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. DNMG 110408 T5125 indexable turning insert for turning — Tungaloy DNMG 110408 T5125 is an ISO-format indexable insert designed for external and internal turning under interrupted cuts and less stable machining conditions DNMG geometry, ISO 110408 compatible insert CVD-coated carbide grade T5125 for toughness Optimised for cast iron and interrupted cuts Double-sided chipbreaker with cylindrical hole Predictable geometry for repeatable machining results The rhombic 55° geometry delivers a reliable approach angle that balances cutting forces and surface finish. With an 11 mm size, 4.76 mm thickness and a 0.8 mm corner radius, the insert provides defined engagement and predictable wear behaviour. The central cylindrical hole enables secure clamping in standard holders; compatibility with toolholders is governed by form, clearance angle, tolerance class, fastening method, size and thickness, which simplifies the selection process when replacing worn cutting edges. Clear dimensional data reduce setup time and support consistent process planning. Coating and grade designed for interrupted cuts and cast iron The CVD-coated carbide in grade T5125 is formulated to be tougher for applications with interrupted cuts or less rigid set-ups, particularly when machining cast iron. This coating process builds a wear-resistant layer while maintaining a resilient substrate, which helps to preserve the cutting edge under shock loading and micro-chipping. As a result, the insert sustains performance where brittle edges would otherwise fail, enabling longer tool life and more consistent surface quality when working in demanding turning operations. Practical system benefits that cut downtime The insert is part of a standard system build: ISO indexable insert, matched external holder or boring bar, shim/clamping set and spare screws. The double-sided chipbreaker extends service life by allowing index rotation, while the ISO form factor ensures interchangeability across compatible toolholders. For workshop logistics this means reduced inventory complexity and faster replacements. Selecting the appropriate chipbreaker and grade for the workpiece material and machine stability further improves process reliability and reduces unplanned stops. For cast-iron turning where interrupted cuts are frequent, rely on Tungaloy’s CVD-coated T5125 grade—contact Metav Werkzeuge for tailored application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6852961 Manufacturer SKU: TUN6852961 Seller SKU: 6852961-Tungaloy Model series: ISO-indexable turning inserts Application: Turning Facts Insert designation: DNMG110408 Geometry angle: 55° Corner radius: 0.8 mm Size: 11 mm Thickness: 4.76 mm Special features Grade: T5125 Material: CVD-coated carbide Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Relief angle: 0° FAQ What materials is this insert optimised for? The insert is optimised for cast iron turning, especially under interrupted cuts or less stable machining conditions; the T5125 grade on the DNMG 110408 geometry offers increased toughness for these applications. Which toolholders are compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the ISO DNMG 110408 format fits holders designed for DNMG inserts with a central cylindrical hole and the stated dimensions. What are the key dimensions to check before fitting? Key dimensions are: size 11 mm, thickness 4.76 mm, corner radius 0.8 mm and a 55° geometry; the cylindrical hole and rhombic form must match the clamping arrangement. Is the insert single- or double-sided and how does that impact life? This is a double-sided insert with a chipbreaker on both faces; reversing the indexable insert extends usable life and improves overall cost-efficiency. What does the CVD coating provide for this grade? The CVD-coated carbide in grade T5125 increases wear resistance while preserving substrate toughness, improving performance during interrupted cuts and reducing edge chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T6215 Wendeplatten - Tungaloy
Benefit from a combination of CVD‑coated carbide wear resistance and ISO‑compliant geometry that secures consistent results when turning stainless steel; the robust 55° rhombic form and 0.8 mm corner radius promote repeatable edge life and process stability. Order the DNMG110408 T6215 Tungaloy insert directly via Metav Werkzeuge or request application advice from our consultants. DNMG110408 T6215 — ISO rhombic turning insert, CVD‑coated carbide, 55° geometry by Tungaloy The DNMG110408 T6215 is an ISO‑standard rhombic insert intended for external and internal turning, optimised for stable to slightly interrupted cuts in stainless steel. CVD‑coated carbide grade T6215 for wear resistance ISO DNMG110408 rhombic insert, 55° cutting geometry 0.8 mm corner radius for consistent edge strength Double-sided chipbreaker, cylindrical hole Consistent tool life through CVD coating and robust carbide The T6215 grade combines a CVD‑coating with a wear‑resistant carbide substrate to reduce flank and crater wear during continuous turning operations. This surface treatment improves resistance to adhesive wear and enables a stable cutting edge at moderately elevated temperatures, which is especially beneficial when machining stainless steel. The result is fewer insert changes, longer tool life and more predictable cycle times — all essential for efficient production in batch or series work. Geometry engineered for secure cutting and chip control The rhombic 55° cutting geometry and a 0.8 mm corner radius deliver a balanced mix of strength and accessibility for facing and contouring tasks. The double‑sided chipbreaker is tailored to promote controlled chip formation under a range of feeds and depths of cut; this reduces the risk of built‑up edge and improves surface finish. For workshops seeking improved machine uptime, the insert’s geometry supports repeatable performance and consistent component quality. Practical compatibility and workshop integration As an ISO‑standard insert, the part fits holders that match the DNMG110408 form, free‑rake angle, tolerance class, attachment method, size and thickness. The insert features a cylindrical hole for secure clamping and a plate thickness of 4.76 mm, which together ensure reliable seating and repeatable positioning. For practical use, pairing the insert with an appropriately rated external holder and matching screw/clamping set completes the system for secure, vibration‑resistant turning operations. Application benefits and material range Designed primarily for turning operations, this grade performs well under stable to slightly interrupted conditions commonly encountered in component manufacture. The combination of CVD coating, robust substrate and decisive chip control provides a good cost‑to‑performance ratio for workpieces made from corrosion‑resistant alloys. Where surface integrity and consistent tool life are priorities, the insert offers measurable process improvements without complex parameter changes. Contact Metav Werkzeuge for tailored application advice or to request the DNMG110408 T6215 insert and matching holder recommendations Technical data Article number: 6903039 Manufacturer SKU: TUN6903039 Label: DNMG110408 T6215 Tungaloy‑Wendeplatte Material: Hartmetall Model series: ISO‑Drehwendeschneidplatten Core specifications Shape: rhombic (DNMG) ISO code: 110408 Cutting angle: 55° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 Special features Coating: CVD‑coated carbide (T6215) Chipbreaker: double‑sided Hole: with cylindrical hole Typical application: turning (external and internal) System assembly: ISO indexable insert, matching external holder, backing pad/clamp set, spare screws FAQ What materials is this insert suitable for? The DNMG110408 T6215 insert is designed principally for machining stainless steel and similar corrosion‑resistant alloys under stable to lightly interrupted cutting conditions. How does the T6215 grade affect tool life? The CVD‑coated T6215 grade enhances wear resistance on the carbide substrate, extending the usable life of the insert and reducing changeover frequency. Which holders are compatible with this insert? Compatibility requires holders matching the ISO DNMG110408 form, 55° geometry, plate thickness and attachment style; the insert seats in holders designed for rhombic DNMG inserts. Is the chip control suited to finishing or roughing? The double‑sided chipbreaker offers controlled chip formation across a range of feeds; it is best used where stable cutting and good surface finish are required rather than for very heavy roughing. Can the insert be indexed to use both cutting edges? Yes, the insert is double‑sided and can be indexed to make use of multiple cutting edges, improving economy per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 110408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD coating, ISO compatibility and a robust rhombic profile for reliable turning of stainless steels; order directly via Metav Werkzeuge or consult our team for selection and inventory support. DNMG110408 T6215 – ISO turning insert, CVD-coated carbide, 55° (Tungaloy) A DNMG110408 T6215 indexable turning insert engineered for external and internal turning of stainless steels under stable to mildly interrupted cutting conditions. CVD-coated carbide grade T6215 Designed for stainless steel turning Rhombic 55° profile with 0.8 mm nose radius Double-sided chipbreaker, cylindrical hole Consistent chip control for demanding stainless-steel turning The insert delivers predictable chip formation thanks to its double-sided chipbreaker and optimised geometry, which improves process stability in continuous and slightly interrupted cuts. As an ISO-series indexable part, the component supports standardised tool setups, reducing setup time and lowering the risk of incorrect clamping. This results in a measurable improvement in surface finish and reduced rework when machining stainless steels, while the moderate relief angle helps maintain cutting edge engagement during finishing operations. ISO compatibility that streamlines tool inventory Built to the ISO profile and dimensions, the plate fits holders that match form, relief angle and tolerance class. The standardised specification simplifies stock management and makes tool replacement straightforward on diverse turning centres. Users benefit from reduced downtimes and easier tool planning because the insert’s ISO-standard sizing and the cylindrical locating hole ensure a repeatable, secure clamp in compatible toolholders without the need for custom adapters. Durable carbide grade and coating for long tool life The T6215 grade is a CVD-coated carbide designed specifically for turning stainless steels under stable to mildly interrupted conditions. The coating provides enhanced wear resistance and thermal stability, which decreases flank and crater wear during extended runs. With a 0.8 mm nose radius and a 55° rhombic shape, the geometry balances strength and precision—allowing good edge life while preserving the capacity for fine surface finishes on challenging alloys. Economical indexing and practical application guidance The double-sided construction effectively doubles the number of available cutting edges, improving cost-efficiency per edge and simplifying inventory usage. Suitable for both external and internal turning, the insert is best paired with a matching holder and a chipbreaker selected for the workpiece material and machining stability. For users introducing the insert into production, modest trial cuts with adjusted feeds and speeds will establish optimal parameters quickly, yielding stable results and consistent component tolerances. For application advice or to secure stock of the T6215 grade inserts, contact Metav Werkzeuge for tailored recommendations and procurement support: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Manufacturer article number: 6944679 Manufacturer SKU: TUN6944679 Item label: DNMG110408 T6215 Tungaloy insert Series: ISO turning inserts Numbers Size: 11 mm Thickness: 4.76 mm Nose radius: 0.8 mm Relief angle: 0° Lead angle: 55° Hole: cylindrical Double-sided Grade: T6215 Material: carbide Coating: CVD-coated Special features Rhombic plate shape Designed for turning Suitable for stainless steels Compatible with ISO holders defined by form and tolerance Stable performance in continuous to lightly interrupted cuts FAQ What materials is this insert best suited for? The DNMG110408 T6215 insert is optimised for machining stainless steels, delivering improved wear resistance and chip control in stable to slightly interrupted turning operations. How many usable cutting edges does the insert provide? The double-sided design of the DNMG110408 provides multiple usable edges, enabling economical indexing and extended tool life before disposal. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, relief angle, tolerance class and clamping method; the DNMG110408 conforms to ISO dimensions and fits holders designed for DNMG inserts. What are the key dimensional specifications to check before mounting? Refer to the plate size (11 mm), thickness (4.76 mm), nose radius (0.8 mm) and the 55° rhombic profile to ensure correct seating and cutting geometry with the selected holder. Is the T6215 grade suitable for interrupted cuts? The T6215 CVD-coated carbide grade is intended for stable to mildly interrupted conditions; for heavy interruptions or severe vibration, evaluate machining stability and consider a grade optimised for roughing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise 55° rhombic geometry and double-sided chipbreaking for consistent stainless steel turning; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG 110408 T6215 DNMG ISO turning insert for Drehen — Tungaloy The DNMG110408 T6215 is an ISO rhombic turning insert engineered for stable to lightly interrupted stainless steel turning, offering a wear-resistant CVD-coated carbide grade for reliable production performance CVD-coated carbide grade T6215 Designed for stainless steel turning Double-sided chipbreaker configuration ISO rhombic geometry, 55° angle High wear resistance for stainless steel machining The CVD-coated carbide in grade T6215 provides improved resistance to abrasive and adhesive wear commonly encountered when machining stainless steel, resulting in longer tool life and fewer insert changes. In practical terms, the coating reduces flank wear and helps maintain dimensional accuracy over extended runs, which translates to fewer interruptions and higher process stability. This benefit is particularly relevant in medium-duty turning where consistent surface quality is required. Geometry and edge preparation that improve surface finish The ISO rhombic DNMG geometry with a 55° main cutting angle and a 0.8 mm corner radius delivers a balanced combination of cutting strength and finish. The moderate corner radius supports improved edge stability during external and internal turning, while the 0° relief angle suits applications where a positive rake is needed for chip control. Together, these characteristics help achieve a reliable surface finish and repeatable part tolerances under normal production loads. System compatibility and secure mounting As an ISO-standard insert, compatibility with holders is governed by form, relief angle, tolerance class, fastening method, size and thickness. The insert is double-sided with a cylindrical centre hole, enabling straightforward clamping and economical indexable use. Match the DNMG insert with a suitable external holder, clamping kit and replacement screws to ensure correct seating and repeatable clamping torque, which reduces the risk of unexpected vibration or insert movement in serial machining. Productivity advantages and application guidance Selecting the double-sided chipbreaker ensures dependable chip control for many stainless alloys under stable to lightly interrupted conditions, reducing secondary operations and downtime. For best results, combine the insert with appropriate cutting parameters and coolant strategy to manage built-up edge and thermal load. The result is improved process reliability, fewer reworks and optimised machining cycles that support production targets. For robust stainless steel turning with dependable tool life, specify the Tungaloy DNMG110408 T6215 via Metav Werkzeuge or request tailored cutting-data support from our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966143 SKU: 6966143-Tungaloy Manufacturer SKU: TUN6966143 Model series: ISO turning inserts Facts Size: 11 mm Thickness: 4.76 mm Relief/frees angle: 0° Main angle: 55° Corner radius: 0.8 mm Special features CVD-coated carbide, grade T6215 ISO rhombic DNMG110408 geometry Double-sided chipbreaker Cylindrical centre hole, with hole For turning (external and internal) Carbide material FAQ What materials is this insert suited for? The DNMG110408 T6215 insert is designed primarily for machining stainless steels, offering wear resistance for stable to lightly interrupted turning. How does the T6215 coating benefit machining? The CVD coating on the T6215 grade reduces abrasive wear and improves edge life during stainless steel turning with the DNMG110408 insert. Is this insert compatible with standard DNMG holders? Yes, the DNMG110408 is ISO-compliant; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness. Can the insert be indexed to use both sides? The insert is double-sided, enabling economical indexing to present a fresh cutting edge once one edge is worn. What is the corner radius and why does it matter? The corner radius is 0.8 mm; this provides a balance between edge strength and surface finish, supporting repeatable tolerances in production turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T6215 and the ISO DNMG 110408 geometry for consistent performance in stainless steel turning; the rhombic form with a 0.8 mm corner radius ensures reliable edge life and secure clamping. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DNMG 110408 T6215 Turning Insert (ISO) by Tungaloy The DNMG110408 T6215 Tungaloy turning insert is an ISO-standard rhombic indexable insert for general external and internal turning, optimised for stable to slightly interrupted stainless steel machining. CVD-coated carbide T6215 Optimised for stainless steel turning ISO DNMG 110408 rhombic form Double-sided chipbreaker with cylindrical hole Consistent cutting performance for stainless steel The CVD-coated carbide T6215 is developed for high wear resistance when machining stainless steel, delivering predictable flank and crater wear under stable to mildly interrupted conditions. The combination of a 55° rhombic geometry and a 0.8 mm corner radius provides a balance between robustness and edge sharpness, reducing the likelihood of built-up edge and improving surface finish. This results in fewer insert changes and more stable cycle times, which supports cost-efficient production runs. Secure clamping and straightforward tool setup The insert’s cylindrical hole and ISO-compatible dimensions simplify clamping in standard DNMG holders and ensure repeatable positioning. With a plate thickness of 4.76 mm and standard ISO 110408 sizing, the component fits common external holders and boring bars when the correct shim and clamp set are used. A stable fixture reduces micro-movement at the cutting edge, which in turn improves tool life and preserves the intended geometry of turned parts. Chip control and surface integrity Equipped with a double-sided chipbreaker, the insert helps to fragment and evacuate chips reliably during turning, lowering the risk of chip entanglement and tool nose damage. The carefully matched chip‑forming geometry supports consistent cutting forces, which contributes to an improved surface quality and reduced need for secondary finishing. For moderately interrupted cuts the chipbreaker maintains control without compromising edge strength. System compatibility and economical use As part of an ISO insert system, the DNMG format integrates with widely available holders, shims and clamping kits. The CVD coating combines with the substrate to give a cost-effective wear profile, meaning longer operating intervals and predictable reconditioning cycles. Specifying the right chipbreaker and grade for the material and cutting conditions enables efficient machining and simpler tool inventory management across production lines. Contact Metav Werkzeuge for tailored application guidance and fast supply of the DNMG110408 T6215 turning insert by Tungaloy; email info@metav-werkzeuge.com or call +49 2822 7131930 for compatibility checks and delivery options Technical data Article number: 6944582 Manufacturer SKU: TUN6944582 Brand: Tungaloy ISO designation: DNMG110408 Facts Relief angle: 0° Insert thickness: 4.76 mm Insert size: 11 Corner radius: 0.8 mm Principal angle: 55° Special features CVD-coated carbide (T6215) Rhombic insert shape (DNMG) Double-sided chipbreaker Cylindrical hole for secure clamping Intended application: turning (external & internal) Compatible with ISO-standard DNMG holders FAQ What materials is this insert best suited for? The DNMG110408 T6215 insert is formulated for stainless steel machining and delivers wear resistance under stable to slightly interrupted turning conditions. Can the DNMG110408 T6215 be used for internal as well as external turning? Yes, the ISO DNMG geometry and standard dimensions allow use in both external holders and appropriate boring bars for internal turning operations. How does the T6215 grade affect tool life? The T6215 CVD-coated carbide grade provides improved wear resistance compared with uncoated substrates, leading to longer edge life and more predictable replacement intervals. Is the insert reversible or single-use? This is a double-sided indexable insert; after one edge is worn it can be indexed to use the second cutting edge, matching typical DNMG insert practice. What must be checked to ensure holder compatibility? Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; ensure the holder accepts ISO DNMG110408 inserts and that shims/clamps match the cylindrical hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T6215 Wendeplatten - Tungaloy
Combining a wear-resistant CVD-coated carbide grade with a 55° rhombic geometry and a 0.8 mm corner radius, this insert delivers extended tool life and reliable surface finish in stainless-steel turning. Order the insert directly via Metav Werkzeuge or ask our consultants for application-specific advice. DNMG110408 T6215 — ISO turning insert for stainless-steel machining, CVD-coated carbide, 0.8 mm radius (Tungaloy) A DNMG110408 T6215 turning insert for external and internal turning, engineered for stable to mildly interrupted cuts in stainless steels and similar alloys. CVD-coated carbide for wear resistance Optimised for stainless steel turning 0.8 mm corner radius, 55° insert geometry Double-sided insert with cylindrical hole Longer tool life through a wear-resistant grade The CVD-coated carbide grade T6215 offers pronounced wear resistance, especially in challenging machining of stainless steel. The chemical vapour deposition layer reduces flank and crater wear, so the cutting edge maintains its geometry for longer. For production environments where consistent component quality and reduced tool changes matter, this combination supports predictable tool life and fewer unplanned stoppages, helping to improve overall process efficiency. Geometry designed for surface finish and edge strength The rhombic insert geometry with a 55° approach angle and a 0.8 mm corner radius balances edge strength and surface integrity. A moderate corner radius increases resistance to chipping while still enabling good finishes on external and internal profiles. The double-sided design provides additional usable edges before replacement, lowering cost per cutting edge. The cylindrical hole supports secure clamping and repeatable seating in standard ISO holders, ensuring stable machining and consistent part tolerances. Practical guidance for stainless-steel turning operations Select the appropriate chipbreaker and grade to match workpiece condition, tool overhang and machine rigidity — the right combination optimises chip control and reduces built-up edge when machining stainless steels. Compatibility with the holder is determined by insert form, clearance (relief) angle, tolerance class, fixing method, size and thickness; these parameters should be checked against the chosen clamping system. When used under stable or slightly interrupted cut conditions, the coated cemented carbide formulation supports steady cutting performance and repeatable results. Faster set-up and predictable production results As part of a standard ISO insert system — insert, matching outer holder or boring bar, clamp or shim and replacement screws — this grade simplifies tool assembly and spare-part management. The robust coating and geometry contribute to improved productivity and fewer changeovers, which translates to better machine uptime. Backed by a reputable tooling brand, the insert is a practical choice for workshops seeking cost-efficient, repeatable machining without compromising on surface quality. For tailored recommendations on using Tungaloy turning inserts in stainless-steel applications, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and process parameters. Technical data Manufacturer article number: 6944672 Manufacturer SKU: TUN6944672 Seller SKU: 6944672-Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: DNMG110408 Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Geometry angle: 55° Special features T6215 CVD-coated carbide grade Rhombic plate form Double-sided chipbreaker Cylindrical hole For turning applications Optimised for machining stainless steels FAQ Which materials is this insert suited to machine? The DNMG110408 T6215 insert is optimised for stainless steel and similar corrosion-resistant alloys under stable to mildly interrupted cutting conditions. What does the T6215 designation indicate? T6215 denotes a CVD-coated carbide grade engineered for enhanced wear resistance and consistent cutting performance on stainless-steel turning operations. How is holder compatibility determined for this insert? Compatibility depends on insert form, relief angle, tolerance class, fixing method, size and thickness; verify these parameters against the chosen ISO holder for the DNMG110408 T6215 insert. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius improves edge strength and reduces chipping risk while still enabling good surface finish on external and internal turns. What advantage does the double-sided design provide? The double-sided configuration of this insert offers additional usable cutting edges and more economical edge utilisation before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T6215 Wendeplatten - Tungaloy
DNMG 110408 T6215 Wendeplatte für Drehen – Tungaloy Die Wendeplatte DNMG110408 T6215 bietet robuste Verschleißfestigkeit und ist für präzise Außen- und Innendreharbeiten an rostfreiem Stahl ausgelegt DNMG110408 T6215 von Tungaloy CVD-beschichtetes Hartmetall für lange Standzeit Rhombische Form mit zylindrischem Loch für ISO-Halter Eckenradius 0,8 mm und 55° Spanwinkel Doppelseitiger Spanbrecher, geeignet für stabile Schnitte Wirtschaftliche Präzision für die Drehbearbeitung Die Wendeplatte verbindet CVD-Beschichtung mit einem verschleißfesten Hartmetall, wodurch die Standzeit bei der Bearbeitung von rostfreiem Stahl deutlich steigt. Durch die speziell abgestimmte Sorte T6215 werden Schneidkantenstabilität und konstante Oberflächengüten gefördert, was in Serienprozessen die Ausschussrate reduziert. Anwender profitieren von planbaren Werkzeugwechselintervallen und besserer Prozessauslastung. Einfache Montage und sichere Halterkompatibilität Dank ISO-Genormtheit und rhombischer Form lässt sich die DNMG110408 schnell in standardisierte Halter einlegen; das zylindrische Loch sorgt für exakte Positionierung. Der FreiWinkel von 0° und der Winkel von 55° ermöglichen stabile Einspannbedingungen bei Außen- und Innendrehen. Diese mechanische Kompatibilität reduziert Rüstzeiten und vereinfacht Lagerhaltung, weil bekannte Halter und Befestigungselemente verwendet werden können. Geeignet für produktive Anwendungen und Anwender Die Platte ist für den Einsatz unter stabilen bis leicht unterbrochenen Schnittbedingungen optimiert und richtet sich an Fertigungsbetriebe und Lohnbearbeiter, die Wert auf konstante Ergebnisse legen. Mit einem Eckenradius von 0,8 mm lassen sich sowohl präzise Konturen als auch wirtschaftliche Spanvolumina erzielen. Für optimale Resultate sollten Spanformer und Schnittdaten auf Werkstoff und Bearbeitungsart abgestimmt werden. Für zuverlässige und wirtschaftliche Drehprozesse empfiehlt sich die Tungaloy DNMG110408 in Sorte T6215; bei Fragen zur Einsatzoptimierung oder zur Halterauswahl steht der Vertrieb der Metav Werkzeuge GmbH gern zur Verfügung – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6944649 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG110408 Hersteller-Artikelnummer: TUN6944649 Schneidstofftyp: CVD-beschichtetes Hartmetall Daten Eckenradius: 0,8 mm Winkel: 55° FreiWinkel: 0° Plattengröße: 11 Besonderheiten Form: rhombisch Loch: mit Loch (zylindrisches Loch) Spanbrecher: doppelseitig Beschichtung: CVD Material: Hartmetall Einsatz: Drehen Materialanwendung: rostfreier Stahl Einsatzbedingung: stabile bis leicht unterbrochene Bearbeitung FAQ Für welche Werkstoffe ist die Wendeplatte geeignet? Die DNMG110408 T6215 von Tungaloy ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt; die T6215-Sorte bietet dafür erhöhte Verschleißfestigkeit und stabile Spanbildung. Ist die Platte beidseitig nutzbar? Ja, die Wendeplatte verfügt über einen doppelseitigen Spanbrecher und kann beidseitig verwendet werden, wodurch sich die Nutzungsdauer pro Platte erhöht. Welche Vorteile bietet die CVD-Beschichtung? Die CVD-Beschichtung auf der DNMG110408 sorgt für eine harte, temperaturechte Schicht, die Standzeit und Kantengüte bei der Bearbeitung von rostfreiem Stahl verbessert. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius von 0,8 mm ermöglicht eine ausgewogene Kombination aus Konturpräzision und Zerspanvolumen, ideal für filigrane Konturen und wirtschaftliche Schnitte. Welche Halter sind kompatibel mit dieser Platte? ISO-genormte Drehhalter für rhombische Platten mit zylindrischem Loch und 55° Aufnahme sind kompatibel; die tatsächliche Passung richtet sich nach Form, FreiWinkel und Toleranzklasse. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 110408 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T6215 and the DNMG 55° rhombic geometry for consistent rostfreier Stahl turning; the double-sided chipbreaker and cylindrical hole deliver secure mounting and economical indexability. Order the inserts directly via Metav Werkzeuge or consult our specialists for tailored application advice. DNMG110408 T6215 — Turning indexable insert by Tungaloy, CVD-coated carbide, rhombic 55° DNMG110408 T6215 is an ISO-format rhombic indexable insert designed for external and internal turning; optimised for rostfreier Stahl under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for rostfreier Stahl turning Rhombic ISO DNMG 11 × 11 mm format Double-sided chipbreaker with cylindrical hole 0.8 mm corner radius, 55° geometry Precise, wear‑resistant cutting for rostfreier Stahl The combination of a CVD-coated carbide substrate and the T6215 grade provides elevated wear resistance and thermal stability, which helps maintain cutting edge integrity during continuous turning of rostfreier Stahl. With a 55° rhombic form and a 0.8 mm corner radius, the insert supports reliable chip control and consistent surface finish. The coating reduces built-up edge formation and improves edge life in demanding stainless machining applications, enabling longer intervals between indexing and fewer tool changes. Productivity through reversible design and secure fixing A double-sided chipbreaker and the reversible ISO DNMG format deliver cost-effective indexability and simple handling during shift changes. The insert is supplied with a cylindrical hole for secure clamping in compatible holders, and its 4.76 mm thickness gives mechanical robustness under moderate cutting forces. This construction supports steady metal removal rates and helps to reduce downtime, while the chipbreaker geometry is matched to common turning strategies to maintain process stability and swarf evacuation. Easy integration within an ISO turning system Compatibility with toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness; confirm these parameters before assembly. The recommended system consists of the ISO insert, a matching external holder or boring bar, a suitable shim/clamping set and replacement screws. Selection of chipbreaker and grade should follow workpiece material, clamping stability and machining strategy. For flexible setups, the reversible nature of the insert and standard DNMG dimensions simplify stocking and reduce inventory complexity. Contact Metav Werkzeuge for expert guidance on selecting and deploying the Tungaloy DNMG110408 T6215 insert for rostfreier Stahl turning or to request order and delivery options: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6966170 Manufacturer SKU: TUN6966170 SKU: 6966170-Tungaloy Model series: ISO turning indexable inserts Insert designation: DNMG110408 Grade: T6215 Material: carbide Facts Geometry angle: 55° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 mm Relief angle: 0° Hole: cylindrical Chipbreaker: double-sided Special features CVD-coated carbide, grade T6215 Rhombic indexable DNMG format Double-sided chipbreaker for reversibility With cylindrical hole for secure clamping ISO-compatible for external and internal turning Suited for rostfreier Stahl under stable to slightly interrupted conditions FAQ What materials is this insert suited for? The DNMG110408 T6215 insert (Tungaloy, SKU: 6966170-Tungaloy) is designed primarily for machining rostfreier Stahl and performs best under stable to lightly interrupted cutting conditions. Can the insert be rotated or reversed to extend life? Yes, the DNMG110408 is double-sided and reversible; both cutting edges can be used to maximise tool life and reduce tooling costs. How does the CVD coating affect performance? The CVD-coated carbide layer on the T6215 grade improves wear resistance and thermal stability, helping the insert retain sharpness and resist built-up edge during rostfreier Stahl turning. Which holder features must be checked for compatibility? Verify holder form, relief angle, tolerance class, fastening type, size and thickness to ensure proper fit with the DNMG110408 insert and secure clamping. Is this insert suitable for internal turning? Yes, the ISO DNMG format and geometry allow use in both external and internal turning operations when paired with the appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T6215 grade for extended tool life and reliable cutting in stainless‑steel turning; the ISO‑standard rhombic geometry and 55° approach angle ensure straightforward integration into existing holders. Order the insert directly via Metav Werkzeuge or consult our advisors for application support. DNMG110408 T6215 turning insert (ISO rhombic, 55°) by Tungaloy A DNMG110408 T6215 is an ISO‑standard rhombic turning insert for external and internal turning, optimised for stainless‑steel applications under stable to lightly interrupted conditions. ISO rhombic insert DNMG110408 CVD-coated carbide grade T6215 Designed for stainless steel turning Double-sided chipbreaker, cylindrical hole Durable CVD coating for consistent tool life and wear resistance The insert is manufactured in a CVD‑coated carbide grade T6215, designed to resist abrasive and adhesive wear encountered when machining stainless steels. A chemically vapour‑deposited coating forms a hard, adherent layer that reduces flank wear and improves edge stability; this results in fewer indexings and a longer service interval, which supports efficient batch production. The outcome is predictable performance and a lower cost per component through extended uptime. ISO compatibility and compact geometry for seamless integration The ISO‑format rhombic geometry with a 55° lead angle and 0° clearance angle enables straightforward reuse in standard DNMG‑compatible holders. The insert measures 11 mm in inscribed circle with a plate thickness of 4.76 mm and a corner radius of 0.8 mm, and it is supplied with a cylindrical hole for positive clamping. These dimensional standards simplify tool selection and replacement, reducing machine downtime and ensuring that the cutting edge is presented consistently for predictable results. Chip control and productivity improvements on the shop floor Equipped with a double‑sided chipbreaker, the insert provides two usable cutting edges per indexed side and promotes uniform chip formation when cutting ductile or work‑hardening stainless alloys. The chipbreaker geometry helps maintain a stable cutting zone, which contributes to improved surface finish and repeatable component quality. For manufacturers prioritising cycle times, the combination of coating and chip control supports higher effective productivity while maintaining process security. Targeted application guidance for turning stainless steels This insert is intended for both external and internal turning operations; select the chipbreaker and grade to match the workpiece material and machining stability. The T6215 grade performs best under stable to lightly interrupted cutting conditions typical of finishing and semi‑finishing passes in stainless steels. For roughing or heavily interrupted cuts, consider a more robust setup or tailor cutting parameters to maintain edge life and part accuracy. If additional machining data is required for a specific alloy or cycle, technical advice is available. For tailored selection and ordering of Tungaloy T6215 inserts, contact Metav Werkzeuge for expert guidance and specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6944621 Manufacturer SKU: TUN6944621 SKU: 6944621-Tungaloy Label: DNMG110408 T6215 Tungaloy turning insert Facts ISO designation: 110408 Inscribed circle: 11 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Approach angle: 55° Clearance angle: 0° Special features Grade: T6215 (CVD-coated carbide) Material: carbide Chipbreaker: double-sided Hole: cylindrical Plate shape: rhombic Typical application: turning stainless steels FAQ What materials is this insert suitable for? The DNMG110408 T6215 insert is formulated for machining stainless steels; the CVD coating and carbide substrate are balanced for wear resistance in such alloys. How does the chipbreaker influence performance? The double‑sided chipbreaker on this Tungaloy insert promotes consistent chip formation and contributes to improved surface finish and process stability during turning operations. Which dimensions are critical when selecting a holder? Match the inscribed circle (11 mm), plate thickness (4.76 mm), hole style (cylindrical) and the DNMG form to your holder’s specifications to ensure correct clamping and geometry. Is this insert suitable for interrupted cuts? The T6215 grade is intended for stable to lightly interrupted conditions; for heavy interruptions, review machining parameters or consider a different grade for optimised edge robustness. How many cutting edges are usable per insert? The insert features a double‑sided chipbreaker; indexing the insert provides multiple usable cutting edges before replacement is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T6215 and the robust 0.8 mm corner radius for consistent performance when turning stainless steels; the ISO compatibility simplifies holder selection and reduces setup time. Order original inserts through Metav Werkzeuge or request specification advice from our consultants. DNMG 110408 T6215 — Indexable turning insert by Tungaloy (for turning) A DNMG110408 T6215 indexable insert engineered for turning applications, providing wear-resistant performance on stainless steels under stable to slightly interrupted cutting conditions. ISO-standard rhombic insert DNMG form CVD-coated carbide grade T6215 For turning stainless steels under stable cuts Double-sided chipbreaker, cylindrical hole High wear resistance for reliable stainless-steel turning The CVD-coated carbide of grade T6215 delivers enhanced wear resistance compared with uncoated grades, extending edge life in the repeated demands of production turning. A chemical vapour deposition layer improves oxidation resistance and reduces flank wear, which translates into longer intervals between indexings and fewer insert changes. For shops machining rostfreiem Stahl, this results in a more predictable process and reduced tooling costs per component. Secure fit and efficient clamping for stable cuts Compatibility with ISO holders is determined by insert form, 0° clearance, tolerance class, fastening method, size and thickness; this ensures a precise fit and stable clamping during cutting. The cylindrical hole and rhombic geometry offer straightforward mounting and positive seating in standard DNMG pockets. The double-sided chipbreaker gives two usable edges per index, improving economy, while the neutral clearance geometry supports consistent contact with the workpiece and predictable chip flow. Practical machining benefits and application guidance A 55° angle and 0.8 mm corner radius balance edge strength and surface finish: the radius supports robust cutting when roughing, yet is small enough to help achieve acceptable finishes at appropriate feeds. The insert is suitable for both external and internal turning when paired with a matching holder or boring bar; a complete system typically comprises the ISO insert, an external holder or boring bar, a shim/clamp set and replacement screws. Select the chipbreaker and grade according to the material, operation and machine stability for best results. Production advantages and brand assurance Using an ISO-conforming indexable insert reduces machine downtime and simplifies inventory management by allowing compatible holders to be used across multiple insert types. The combination of a CVD coating, robust carbide substrate and a proven insert form supports stable chip formation and repeatable results in series production. The article is supplied as an original, factory-new Tungaloy component, ensuring consistent quality across batches. For specification support or to secure original Tungaloy DNMG 110408 T6215 inserts for stainless-steel turning, contact Metav Werkzeuge for tailored advice and fast provision. Technical data Article number: 6944594 Manufacturer SKU: TUN6944594 SKU: 6944594-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG110408 T6215 Tungaloy indexable insert Facts Corner radius: 0.8 mm Angle: 55° Free angle: 0° Size: 11 mm Special features Material: Hartmetall (carbide) Coating / grade: T6215, CVD-coated Plate form: rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: Drehen System components: ISO insert, holder/boring bar, shim/clamp, replacement screws FAQ What materials is this insert suitable for machining? The DNMG110408 T6215 insert is designed primarily for machining stainless steels; the CVD-coated T6215 grade provides wear resistance for stable to slightly interrupted cuts. How is the insert mounted in the holder? The insert uses a cylindrical hole and rhombic form compatible with ISO pockets; proper fit depends on form, clearance angle, tolerance and fastening. How many cutting edges does the insert provide? With a double-sided chipbreaker, the insert offers two indexable edges, improving economy and reducing changeover frequency. What does the 0.8 mm corner radius mean for the component surface? A 0.8 mm corner radius increases edge strength for robust cutting while still permitting good surface quality when matched with appropriate feeds and speeds. Is this an original Tungaloy product? Yes, the DNMG110408 T6215 is supplied as an original, factory-new Tungaloy insert with the listed manufacturer SKU Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 110408 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant CVD-coated grade, a versatile 55° rhombic geometry and a compact 0.8 mm nose radius to raise throughput and maintain surface quality in stable turning operations; order directly via Metav Werkzeuge or request application guidance from the technical team. DNMG 110408 T9205 indexable turning insert by Tungaloy — CVD-coated carbide, 55° rhombic geometry The DNMG110408 T9205 is an ISO-format indexable insert designed for productive external and internal turning of steel under stable conditions, combining a wear-resistant T9205 grade with a compact nose for consistent surface finishes. CVD-coated carbide grade T9205 55° rhombic geometry for versatile turning 0.8 mm nose radius for medium finishing Double-sided with cylindrical hole for secure clamping Boosted productivity through a wear-resistant CVD grade The CVD-coated carbide composition and T9205 designation deliver a combination of wear resistance and edge stability tailored for productive turning of steel at elevated cutting speeds. The CVD coating reduces flank wear and extends tool life under stable machining conditions, which translates into fewer insert changes and more predictable process windows. For production environments seeking economic cutting solutions, the coated grade supports longer uninterrupted runs and consistent part quality. Geometry that stabilises cutting and improves surface consistency The 55° rhombic geometry provides a versatile approach angle suitable for both external and internal operations, while the 0.8 mm nose radius balances strength and finish—larger radii improve tool life and surface integrity; smaller radii enable finer detailing. The double-sided design effectively delivers two usable edges per index, and the cylindrical hole ensures positive clamping in compatible ISO toolholders. Together, these features help achieve reproducible surface roughness and stable cutting forces when the insert is mounted with the correct toolholder and clamping components. System integration and handling advantages for workshop use Compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening, size and thickness; this insert conforms to ISO dimensions for straightforward integration into existing tool systems. The plate thickness of 4.76 mm and the standard size 11 contribute to stable seating and repeatable positioning. The 0° clearance face is suitable for common turning setups, and the double-sided chipbreaker improves chip control in steady-state operations. As part of a complete system—insert, holder, shim and fastening hardware—this solution supports efficient setup changes and predictable machining results. For application-specific recommendations on the T9205 grade and availability of DNMG 110408 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal holder and clamping setup for the operation Technical Data Article number: 6785707 SKU: 6785707-Tungaloy Manufacturer SKU: TUN6785707 Core dimensions ISO designation: 110408 Size: 11 mm Thickness: 4.76 mm Nose radius: 0.8 mm Geometry angle: 55° Free angle (rake/clearance): 0° Materials & features Material: carbide (CVD-coated) Grade: T9205 (wear-resistant) Plate form: rhombic Chipbreaker: double-sided Hole: cylindrical, with hole Sidedness: double-sided Intended application: turning of steel FAQ Which materials is this insert intended for? The T9205 grade of the DNMG 110408 insert is formulated for productive turning of steel; the coating and carbide substrate are optimised for wear resistance in stable conditions. Can the insert be used for both external and internal turning? Yes; the rhombic 55° geometry and compact nose radius make the insert suitable for both external and internal turning tasks when paired with a compatible holder. How does the 0.8 mm nose radius affect the finished surface? A 0.8 mm nose radius offers a compromise between edge strength and surface finish, improving surface integrity compared with smaller radii while still allowing moderate finishing capabilities. Is the DNMG 110408 reversible or indexable on both sides? The insert is double-sided, providing two usable cutting edges and supporting efficient index changes to extend the service life per insert. What determines compatibility with a toolholder? Compatibility depends on ISO form, free angle, tolerance class, fastening method, size and thickness; the insert follows ISO dimensions to simplify matching with standard holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com