DNMG 110412 T9225 Wendeplatten - Tungaloy
Benefit from a robust, CVD-coated T9225 carbide grade and a versatile 55° rhombic geometry that combine for stable chip formation and long tool life in medium to heavy turning. Order directly via Metav Werkzeuge or consult the team for compatibility and application advice. DNMG 110412 T9225 turning insert by Tungaloy — ISO 55° rhombic CVD-coated carbide DNMG110412 T9225 is an ISO-standard indexable insert designed for external and internal turning; the rhombic 55° geometry and universal T9225 grade suit variable engagement and interrupted cuts CVD-coated carbide T9225 for robust cutting 55° rhombic geometry for versatile turning 1.2 mm corner radius for stable edge strength Double-sided chipbreaker, cylindrical hole for secure fixing Dependable cutting performance for medium to heavy steel turning The CVD-coated T9225 carbide grade provides a balanced combination of toughness and wear resistance that is engineered for the demands of steel machining under changing engagement conditions. The coating improves resistance to abrasive wear while the substrate retains enough toughness for light interruptions and variable cutting depths. As a result, the insert delivers consistent edge life and predictable replacement intervals, which supports production planning and reduces unexpected tool changes. Geometry and dimensions that simplify holder compatibility A 55° rhombic shape with a 1.2 mm corner radius and 0° relief angle offers a flexible compromise between chip control and profile accuracy. The plate thickness of 4.76 mm and the inscribed circle size 11 are standard ISO dimensions; compatibility with a chosen holder depends on form, relief angle, tolerance class, clamping method and plate thickness. Using inserts with standard ISO interfaces ensures rapid replacement in existing indexable systems and keeps machine downtime to a minimum. System benefits that cut processing costs The double-sided chipbreaker and cylindrical hole enhance clamping stability and allow two usable cutting edges per insert, lowering cost per edge. Integrated into a conventional indexable system—insert, matching external holder or boring bar, shim and clamping set—this solution streamlines inventory and simplifies logistics. Reliable chip control and repeatable seating reduce scrap and rework, contributing to measurable improvements in line throughput and tool cost efficiency. Choosing the right chipbreaker and application tips Select a chipbreaker and grade that match workpiece material, process stability and cutting parameters; the universal nature of this grade makes it particularly suitable for batches where conditions vary. For interrupted cuts or less rigid setups, prefer conservative feeds and make use of the 1.2 mm radius to protect the edge. For higher productivity, tune cutting data gradually while monitoring surface finish and edge wear to find the optimal balance between metal removal rate and tool life. Contact Metav Werkzeuge to specify the Tungaloy DNMG110412 T9225 for your turning application or to request compatibility advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6797194 Manufacturer SKU: TUN6797194 SKU: 6797194-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Grade: T9225 Material: Carbide Cutting type: CVD-coated carbide Angle: 55° Corner radius: 1.2 mm Relief angle: 0° Thickness: 4.76 mm Size: 11 Special features Design: rhombic plate, DNMG110412 Chipbreaker: double-sided Hole: with cylindrical hole Application: external and internal turning System components: insert, matching holder or boring bar, shim/clamping set, screws FAQ What materials is this insert suitable for? The DNMG110412 T9225 insert is a robust universal grade intended primarily for steel machining; its combination of a CVD coating and carbide substrate allows reliable performance across many steel grades. How does the 55° geometry affect turning operations? A 55° rhombic geometry provides versatility for both finishing and medium turning, enabling comfortable access to shoulders and tight profiles while maintaining good edge strength. Can the plate be used on a boring bar for internal turning? Yes, the ISO DNMG form and dimensions allow use in compatible boring bars and external holders; ensure holder compatibility by matching form, relief angle, tolerance and plate thickness. What are the key advantages of the T9225 grade? T9225 offers a balance of toughness and wear resistance suited to variable cutting conditions, helping to maintain stable chip formation and longer edge life in medium to heavy machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 AH6225 Wendeplatten - Tungaloy
A robust, cost-effective solution that pairs a PVD-coated cemented carbide grade with a double-sided chipbreaker to deliver steady performance in turning applications; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 150402 AH6225 Tungaloy indexable insert for turning — PVD-coated carbide, 55° DNMG150402 AH6225 Tungaloy insert is an ISO-standard turning insert engineered for external and internal turning, offering a sharp yet stable cutting edge optimised for rostfreier Stahl. PVD-coated carbide for robust edge life Designed for rostfreier Stahl machining Rhombic DNMG form with 55° relief angle Double-sided chipbreaker, cylindrical hole Consistent cutting performance for turning operations The combination of a PVD coating on cemented carbide and the universal AH6225 grade yields a balance between sharpness and edge strength, making this insert particularly suited to rostfreier Stahl workpieces. The ISO-standard geometry ensures predictable seating and repeatability in compatible holders, so interruptions for adjustment are reduced. With a 55° geometry and a precisely controlled rake, the insert provides stable cutting forces that support consistent surface finish and dimensional control across varied turning tasks. Reliable chip control and predictable tool life A double-sided chipbreaker paired with a corner radius of 0.2 mm helps to manage swarf and promote stable chip formation during medium-duty cuts. The rhombic form and the cylindrical fixing hole enable secure clamping in a wide range of external holders and boring bars, reducing the likelihood of vibration-related edge damage. These features translate into fewer tool changes and lower process variability, supporting higher productivity and a better cost-per-component ratio in series production. Practical system integration and application advice The insert is part of an ISO insert system: a corresponding external holder or boring bar, appropriate shim/clamping kit and replacement screws form the complete toolset. The plate thickness of 4.76 mm and the 15 mm nominal size are typical for robust turning tasks and allow straightforward substitution in standard tool assemblies. For best results, select the chipbreaker and grade in line with component rigidity and feed strategy; this approach secures both performance and repeatable tool life across internal and external turning operations. For reliable machining of rostfreier Stahl with Tungaloy quality, contact Metav Werkzeuge for tailored recommendations or place an order for the AH6225 inserts through Metav Werkzeuge today. Technical Data Article number: 6950949 SKU: 6950949-Tungaloy Manufacturer SKU: TUN6950949 Manufacturer: Tungaloy Facts Relief angle: 55° Corner radius: 0.2 mm Plate thickness: 4.76 mm Plate size: 15 mm Relief (clearance) angle: 0° Hole: with hole (cylindrical) Special features PVD-coated cemented carbide Universal AH6225 grade for rostfreier Stahl Rhombic plate form (DNMG) Double-sided chipbreaker ISO-standard turning insert Suitable for external and internal turning Cylindrical fixing hole for secure clamping FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The AH6225 grade and PVD-coated cemented carbide substrate make the DNMG150402 AH6225 Tungaloy insert well suited to machining rostfreier Stahl under a range of cutting conditions. What holder compatibility is required for this DNMG insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness; the insert follows ISO standards so it fits standard DNMG-compatible external holders and boring bars. Does the insert offer good chip control for medium feeds? The double-sided chipbreaker and 0.2 mm corner radius provide controlled chip formation for medium cutting conditions, improving surface finish and tool life. Can this insert be used for internal turning as well as external turning? Yes. The insert is designed for both external and internal turning; selection of the appropriate holder and clamping set ensures secure seating and effective performance. What material is the insert made from and what is the coating? The insert is manufactured from cemented carbide and finished with a PVD coating; the supplied grade is AH6225 for universal rostfreier Stahl machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 AH6225 Wendeplatten - Tungaloy
DNMG150402 AH6225 Tungaloy-Wendeplatte für Drehen | Tungaloy Die DNMG150402 AH6225 Tungaloy-Wendeplatte ist eine ISO-genormte Wendeschneidplatte, entwickelt für das Außen- und Innendrehen von rostfreiem Stahl bei mittleren Schnittbedingungen. Rhombische Plattenform mit 55° Winkel PVD-beschichtetes Hartmetall, Sorte AH6225 Doppelseitiger Spanbrecher für stabile Spanbildung Zylindrisches Loch für sichere Befestigung Eckenradius 0,2 mm für feine Konturen Wirtschaftliche Schneidleistung für wechselnde Bedingungen Die AH6225-Sorte kombiniert PVD-Beschichtung und verschleißfestes Hartmetall, um eine scharfe und zugleich stabile Schneidkante zu gewährleisten. Dadurch verbessert sich die Produktivität bei mittleren Schnitten und wechselnden Bedingungen, weil die Standzeit steigt und Nacharbeiten reduziert werden. Die robuste Sortenaufstellung sorgt für konstante Bearbeitungsergebnisse bei rostfreiem Stahl. Präzise Kantengeometrie für bessere Oberflächen Der Eckenradius von 0,2 mm und die rhombische Plattenform ermöglichen saubere Konturen bei Detailarbeiten. In Kombination mit dem 55° Einstellwinkel reduziert die Geometrie Vibrationen und verbessert die Oberflächengüte. Anwender profitieren von reproduzierbaren Ergebnissen und geringem Nacharbeitaufwand bei anspruchsvollen Werkstückgeometrien. Sichere Montage und breite Kompatibilität Die Platte ist doppelseitig ausgeführt und verfügt über ein zylindrisches Loch, das eine sichere Befestigung an ISO-kompatiblen Haltern erlaubt. Die Plattendicke von 4,76 mm und die standardisierte Bauform gewährleisten Austauschbarkeit und einfache Vorratshaltung im Betrieb. Die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Anwendungsfeld, Zielgruppe und Materialhinweis Dieses Einsatzprofil richtet sich an Produktionsbetriebe und Lohnfertiger, die rostfreien Stahl bearbeiten und dabei Wert auf Wirtschaftlichkeit und Prozesssicherheit legen. Die PVD-Beschichtung (Physikalische Gasphasenabscheidung) erhöht die Verschleißfestigkeit und verbessert die Wärmebeständigkeit an der Schneidkante. Bei der Auswahl von Spanbrecher und Sortenaufbau sollte auf Werkstoff, Bearbeitungsart und Maschinenstabilität geachtet werden. Empfehlung: Für produktive Drehverfahren die AH6225-Sorte von Tungaloy wählen; bei Detailfragen technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: 6966113 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG150402 AH6225 Tungaloy-Wendeplatte Hersteller SKU: TUN6966113 Fakten Eckenradius: 0,2 mm Winkel: 55° Plattendicke: 4,76 mm Plattengröße: 15 mm Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall (PVD: Physikalische Gasphasenabscheidung) Sorte: AH6225 Plattenform: rhombisch Freiwinkel: 0° Mit Loch: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen FAQ Für welche Werkstoffe eignet sich die Platte am besten? Die DNMG150402 AH6225 Tungaloy-Wendeplatte ist speziell für rostfreien Stahl konzipiert; die Kombination aus PVD-beschichtetem Hartmetall und Sorte AH6225 bietet gute Standzeit und stabile Spanbildung bei diesen Werkstoffen. Wie wird die Platte am Halter befestigt? Die Platte verfügt über ein zylindrisches Loch zur sicheren Befestigung an ISO-kompatiblen Haltern; die standardisierte Form und Dicke erleichtern die Montage und den Plattenwechsel. Ist die Platte beidseitig nutzbar? Ja, die DNMG150402 AH6225 Tungaloy-Wendeplatte ist doppelseitig ausgeführt und bietet damit zwei nutzbare Schneidkanten, was die Wirtschaftlichkeit erhöht. Welche Vorteile bietet die PVD-Beschichtung? Die PVD-Beschichtung der AH6225-Sorte erhöht die Verschleißfestigkeit und die Wärmebeständigkeit der Schneidkante, was zu längeren Standzeiten und gleichmäßigerem Abriebverhalten führt. Welche Rolle spielt der Eckenradius 0,2 mm? Der Eckenradius 0,2 mm ermöglicht feine Konturen und eine verbesserte Oberflächengüte bei Detailbearbeitung, eignet sich aber primär für Anwendungen mit mittlerer Schnittintensität. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of durable PVD-coated carbide, proven geometry and ISO conformity for reliable turning operations; the insert supports efficient machining of rostfreie Stähle with stable chip control. Order the part directly via Metav Werkzeuge or consult the Metav team for application advice. DNMG150402 AH6225 Tungaloy turning insert — PVD-coated carbide, 55° rhombic DNMG150402 AH6225 is an ISO-compliant turning insert for external and internal turning, engineered for medium cutting conditions and optimised for rostfreie Stähle. PVD-coated carbide grade AH6225 55° rhombic geometry for versatile turning Double-sided chipbreaker, with cylindrical hole Corner radius 0.2 mm, thickness 4.76 mm Consistent cutting performance that reduces setup risk The AH6225 grade combines a PVD-coated surface with a robust carbide substrate to deliver a sharp yet stable cutting edge under varying conditions. For shops machining rostfreie Stähle, this composition lowers the risk of built-up edge and improves tool life during medium-duty turning. The insert’s 55° rhombic geometry supports both external and internal profiles while the double-sided chipbreaker maintains consistent chip formation, so setup adjustments are minimised and cycle time variability is reduced. Geometry and compatibility designed for predictable results The insert follows ISO dimensions and the specified form, relief angle and tolerance class ensure secure seating in compatible holders. The cylindrical hole and standard fixing allow fast index changes and safe clamping; the corner radius 0.2 mm and 4.76 mm thickness balance strength and edge sharpness for general-purpose turning. This combination facilitates repeatable part quality and reduces scrappage, particularly when working across a range of rostfreie Stähle where tool stability and reliable chip control are paramount. Process efficiency, chip control and ease of integration Using an indexable solution from the ISO series simplifies inventory management and reduces downtime. The double-sided chipbreaker provides improved chip evacuation and lowers the probability of surface damage, while the PVD coating contributes to wear resistance under interrupted cuts. Integration into a turning system requires the matching holder, shim and clamping set; spare screws and replacement plates permit quick restorative actions, supporting continuous production and higher productivity in precision turning tasks. For application support or to order DNMG150402 AH6225 inserts from Tungaloy, contact Metav Werkzeuge for a tailored recommendation and rapid delivery. Technical data Article number: 6950934 SKU: 6950934-Tungaloy Manufacturer SKU: TUN6950934 Model series: ISO-Drehwendeschneidplatten Material: Carbide Numbers / Core technical data Geometry angle: 55° Corner radius: 0.2 mm Thickness: 4.76 mm Inscribed circle/size: 15 mm Relief angle: 0° Hole: with hole (cylindrical) Designs / Special features Grade/coating: AH6225, PVD-coated carbide Plate shape: rhombic Chipbreaker: double-sided Application: Drehen (external and internal turning) System components: insert, holder, shim/clamp set, replacement screws ISO-compliant turning insert, compatible with standard holders FAQ What materials is this insert suited for? This insert is specified for machining rostfreie Stähle and is designed to handle medium turning conditions with reliable chip control. How does the AH6225 grade improve tool life? The AH6225 PVD-coated carbide provides a wear-resistant surface and a stable cutting edge, which together reduce built-up edge and extend usable life under variable conditions. Is the DNMG150402 compatible with standard holders? The DNMG150402 conforms to ISO dimensions; compatibility depends on matching form, relief angle, tolerance class, fixing method, size and thickness in the chosen holder. Can the insert be indexed for a second cutting edge? Yes, the insert is double-sided with a chipbreaker on both sides, allowing indexing to a fresh edge when needed. What chip control can be expected with this geometry? The combination of the 55° rhombic geometry and the double-sided chipbreaker ensures predictable chip formation and improved evacuation during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 AH8015 Wendeplatten - Tungaloy
Benefit from a balanced combination of PVD-coated carbide AH8015, a rhombic ISO insert with a 55° cutting angle and a 0° clearance, engineered for reliable turning of heat‑resistant alloys; procure the part directly via Metav Werkzeuge or consult our specialists for process matching. DNMG150402 AH8015 ISO turning insert for turning — PVD-coated carbide — Tungaloy The DNMG150402 AH8015 is a rhombic ISO turning insert designed for external and internal turning, offering a balance of wear resistance and edge stability for heat‑resistant alloys. ISO-standard rhombic design for stable clamping PVD-coated carbide grade AH8015 for heat resistance 55° cutting angle for versatile turning operations Double-sided chipbreaker and cylindrical hole Consistent productivity through a balanced grade The combination of PVD-coated surface treatment and the AH8015 carbide grade delivers an effective compromise between wear resistance and edge stability, which is essential when machining heat‑resistant alloys. PVD coating reduces friction and increases thermal resistance at the cutting edge; the carbide substrate provides the hardness required to withstand abrasive conditions. As a result, the insert supports longer tool life and stable component tolerances, contributing to predictable cycle times and reduced scrap rates. Clear guidance for toolholder compatibility and mounting Compatibility depends on several geometric and tolerancing factors: ISO designation, insert form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic form and the cylindrical hole allow secure clamping in common DNMG‑compatible holders and boring bars. When selecting a holder, ensure the seat and clamp match the insert dimensions (15 mm across the inscribed circle and 4.76 mm thickness) and that the fastening method aligns with the cylindrical hole style for proper seat stability and repeatable repositioning. Improved chip control and efficient process design The double-sided chipbreaker supports consistent chip formation across indexed edges, reducing risk of built-up edge and minimising interruptions. The 0° clearance angle influences the engagement geometry and is suitable for a broad range of turning tasks where a neutral relief favours stability. Choosing a chipbreaker and insert grade tuned to the workpiece material and operation (roughing, semi‑finishing or finishing) leads to lower tool consumption and improved surface quality, which in turn reduces downstream machining or rework. Practical application advice for workshop planners This insert suits general turning of heat‑resistant alloys and similar tough materials where a balance of durability and edge robustness is required. The ISO series design simplifies logistics and inventory: the double‑sided nature provides multiple indexable edges, while the PVD layer and carbide substrate deliver consistent performance across interrupted and continuous cuts. For process optimisation, pair the insert with a rigid holder, set cutting data to manufacturer recommendations for the chosen material class, and monitor tool wear to determine the most economical index interval. For tailored advice on Tungaloy turning inserts or to order DNMG150402 AH8015, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6950950 SKU: 6950950-Tungaloy Manufacturer SKU: TUN6950950 Model designation: DNMG150402 Grade: AH8015 Core specifications Insert size (inscribed circle): 15 mm Thickness: 4.76 mm Corner radius: 0.2 mm Cutting angle: 55° Clearance angle: 0° Special features Material: carbide Coating: PVD Shape: rhombic Hole: cylindrical Chipbreaker: double-sided Series: ISO turning inserts Application: Turning FAQ What materials is this insert suitable for? The DNMG150402 AH8015 Tungaloy turning insert is optimised for general machining of heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability. How is compatibility with a toolholder ensured? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic form and cylindrical hole facilitate mounting in standard DNMG holders. Can the insert be indexed and reused? Yes, the insert is double‑sided with indexable edges, allowing rotation to fresh cutting edges until flank wear indicates replacement or disposal. What role does the PVD coating play in performance? The PVD coating reduces friction and increases thermal resistance at the cutting edge, improving tool life and maintaining cutting stability during higher temperatures. Which operations benefit most from this insert? External and internal turning operations—particularly where a balance of edge stability and wear resistance is required—benefit from this insert's geometry and grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced wear resistance and edge stability provided by the AH8015 grade, together with ISO compatibility for standard holders, to maintain productive turning cycles; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150402 AH8015 indexable turning insert — PVD‑coated carbide, 55° rhombic geometry (Tungaloy) DNMG150402 AH8015 is an ISO rhombic, double‑sided indexable insert for external and internal turning, optimised for heat‑resistant alloys and universal machining tasks. ISO rhombic insert, 55° geometry PVD‑coated carbide grade AH8015 Double‑sided chipbreaker, 0.2 mm nose radius Cylindrical hole for secure clamping Boosted process reliability for heat‑resistant alloys The PVD‑coated carbide grade AH8015 delivers a well‑balanced combination of wear resistance and edge stability, making the insert particularly suitable for machining heat‑resistant alloys. The coating reduces flank wear and helps maintain a consistent cutting edge under thermal load, which translates into longer tool life and fewer insert changes. For production environments where uptime and repeatable results matter, this turning grade offers a reliable compromise between productivity and maintenance intervals. Precise geometry for repeatable surface quality With a 55° rhombic geometry and a 0.2 mm corner radius, the design supports accurate profile turning and fine finishing passes. The rhombic shape allows versatile approach angles for both external and internal operations, while the small nose radius aids in achieving tighter tolerances and improved surface integrity. The double‑sided chipbreaker ensures predictable chip formation across a range of depths of cut, helping to protect the cutting edge and the workpiece surface. Compatibility and secure clamping to reduce setup time The insert is manufactured to ISO dimensions and features a cylindrical hole for positive, repeatable clamping. Compatibility with a wide range of external holders depends on form, relief angle, tolerance class, fixation method, size and thickness; matching the insert to an appropriate holder and clamp set ensures stable toolholding and minimises vibration. The standardised design supports straightforward stocking and quick replacement, simplifying logistics on the shop floor. Application guidance and practical benefits Designed for turning operations, this indexable insert is well suited to both roughing and finishing when paired with the correct chipbreaker and cutting parameters. The AH8015 grade is a first choice for general machining of heat‑resistant alloys thanks to its balance of toughness and wear resistance. When selecting cutting data, favour moderate speeds and appropriate feed rates to exploit the coating’s thermal advantages; the insert will then provide consistent edge life and good productivity across batch and single‑piece production. For machining heat‑resistant alloys with consistent results, request the Tungaloy DNMG150402 AH8015 indexable insert from Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for advice on matching holders and fast delivery Technical data Article number: 6950935 Manufacturer SKU: TUN6950935 SKU: 6950935-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DNMG150402 ISO code: 150402 Inscribed circle / size: 15 mm Thickness: 4.76 mm Geometry angle: 55° Relief (free) angle: 0° Corner radius: 0.2 mm Hole: with hole (cylindrical) Chipbreaker: double-sided Use: Turning Design & special features Material: carbide Grade/coating: AH8015 (PVD‑coated) Shape: rhombic Application focus: heat‑resistant alloys, general turning Sides usable: double‑sided indexable insert FAQ Which materials is this insert best suited for? The AH8015 grade is tuned for heat‑resistant alloys and provides a balanced performance for difficult‑to‑machine materials; it also performs well in many general turning applications. How does the insert clamp to the holder? The DNMG150402 has a cylindrical hole for secure clamping; compatibility with a specific holder depends on form, relief angle, tolerance class, fixation and size. What advantages does the PVD coating bring? PVD coating on this carbide grade reduces flank wear and improves thermal resistance, supporting longer edge life and more consistent surface quality under elevated cutting temperatures. Can the insert be used for both roughing and finishing? Yes — with the appropriate chipbreaker and cutting data, the insert is suitable for both roughing and finishing passes, offering flexibility in production workflows. What is the significance of the 0.2 mm corner radius? A 0.2 mm nose radius enables precise profiling and fine finishing, helping to achieve tighter tolerances and improved surface integrity on turned parts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150402 AH8015 Wendeplatten - Tungaloy
Compact, ISO‑compliant indexable insert combining PVD‑coated AH8015 toughness and a precise 0.2 mm corner radius to deliver stable cutting in turning operations; order via Metav Werkzeuge or consult its technical advisors for application-specific selection. DNMG150402 AH8015 ISO indexable insert for Turning — PVD‑coated carbide, 0.2 mm radius by Tungaloy The DNMG150402 AH8015 is an ISO‑standard rhombic insert designed for external and internal turning of heat‑resistant alloys, offering a balanced mix of wear resistance and cutting‑edge stability. PVD‑coated AH8015 for heat‑resistant alloys ISO DNMG150402 rhombic geometry, 55° cutting angle 0.2 mm corner radius for precise profile control Double‑sided chipbreaker with cylindrical hole Robust performance for heat‑resistant alloys and general turning The PVD‑coated AH8015 grade provides a balanced combination of wear resistance and edge stability, making it a first choice for machining heat‑resistant alloys and mixed materials. The PVD layer enhances thermal resistance and reduces adhesion at the cutting edge, which helps maintain consistent tool life under elevated cutting temperatures. Specified as an ISO‑type rhombic insert with a 55° main cutting angle, this geometry promotes predictable chip flow and stable engagement during both finishing and light roughing, enabling reliable cycle times and repeatable component quality. Predictable integration with ISO holder systems Compatibility with a holder depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic shape and 0° clearance requirement mean that standard DNMG‑style external holders or boring bars that accept ISO DNMG150402 inserts will accommodate this insert when the clamp and pocket match the ISO dimensions. The central cylindrical hole and double‑sided design permit economical indexing and simple replacement, while the 4.76 mm plate thickness gives a solid seating for torque transmission and improved vibration damping in less rigid set‑ups. Precision profile control and process stability A 0.2 mm corner radius supports accurate profile generation and reduced risk of corner chipping compared with sharper radii when machining interrupted or variable sections. This modest radius also helps to distribute cutting forces more evenly, resulting in better surface integrity and fewer rework steps. When combined with the AH8015 grade, operators achieve a favourable balance between edge life and resistance to thermal softening, which contributes to longer intervals between insert changes and more predictable production planning. Practical information for selection and application The insert is supplied as an ISO‑standard DNMG shape with a cylindrical hole and a double‑sided chipbreaker, suitable for both external and internal turning tasks where a versatile, general‑purpose grade is preferred. Selection of the correct chipbreaker and insert grade should be matched to workpiece material, machining strategy and machine rigidity. If a different clearance angle, radius or coating is required for specific alloys or higher feed rates, selection can be adapted within the same ISO family to maintain process continuity. For reliable supply and application advice on Tungaloy PVD‑coated DNMG150402 inserts, contact Metav Werkzeuge for technical selection and order processing: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6966115-Tungaloy Manufacturer article number: 6966115 Manufacturer SKU: TUN6966115 Model series: ISO‑Drehwendeschneidplatten Application: Turning Manufacturer: Tungaloy ISO designation: 150402 Insert designation: DNMG150402 AH8015 Core figures Corner radius: 0.2 mm Insert size: 15 mm Thickness: 4.76 mm Cutting angle: 55° Clearance angle: 0° Special features Coating / grade: AH8015 (PVD‑coated carbide) Insert shape: rhombic Hole: cylindrical, with hole Chipbreaker: double‑sided Insert type: ISO indexable insert Application scope: external and internal turning FAQ What materials is this insert best suited for? The DNMG150402 AH8015 insert is formulated for machining heat‑resistant alloys and a broad range of materials where a balanced wear resistance and edge stability are required; AH8015 offers good thermal resistance for elevated cutting temperatures. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius provides improved profile control and distributes cutting loads to reduce the risk of corner chipping, helping to produce a consistent surface finish with fewer rework steps when using the DNMG150402 type insert. Can the insert be used on both external and internal turning operations? Yes, the ISO rhombic geometry and double‑sided configuration make the insert suitable for both external and internal turning; correct holder selection is required to match the insert form and clearance specifications. What does the AH8015 grade mean for tool life and edge integrity? AH8015 is a PVD‑coated carbide grade balanced between wear resistance and edge toughness, which supports longer edge life under thermal load while maintaining reliable cutting‑edge stability. Is the DNMG150402 compatible with standard DNMG toolholders? Compatibility is determined by form, clearance angle, tolerance class, fastening and thickness; when those match the ISO DNMG specifications, the insert will seat and secure correctly in standard DNMG holders. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150402 NS9530 Wendeplatten - Tungaloy
Take advantage of the sharp cutting edge, low cutting forces and ISO conformity for consistent finishing results; the combination of a precise geometry and a uncoated cermet grade ensures stable machining with excellent surface quality. Order the insert directly via Metav Werkzeuge or consult our advisors for application details. DNMG 150402 NS9530 — DNMG indexable turning insert, uncoated cermet, 0.2 mm radius (Tungaloy) DNMG150402 NS9530 is an ISO‑standard indexable insert designed for precision external and internal turning, optimised as a finishing grade for steel with a sharp cutting edge and low cutting forces Uncoated cermet for high surface finish Sharp cutting edge with low cutting forces Optimised for continuous cuts and small depths ISO DNMG150402 shape with cylindrical hole Greater part quality through lower cutting forces The uncoated cermet grade NS9530 is formulated for finishing operations where surface quality and dimensional consistency are priorities. Compared with roughing grades, this insert reduces cutting forces and vibration, which in turn diminishes tool marks and enhances reproducibility of turned components. The combination of a sharp cutting edge and a small 0.2 mm corner radius supports fine feed strategies and helps achieve tight surface roughness targets without excessive tool pressure. Designed geometry for secure mounting and predictable performance ISO conformity of the DNMG form simplifies toolholder selection and ensures predictable seating in a matching carrier. The ISO DNMG150402 geometry with a cylindrical hole and rhombic plate form provides repeatable clamping, while the 0° relief angle and 55° lead angle help maintain a steady cutting direction and chip flow. This engineered geometry reduces setup time and supports consistent results across series production, improving overall process reliability. Material and edge concept explained for non‑specialists A cermet cutting material combines ceramic and metallic phases to deliver a very fine edge and good wear behaviour when finishing steel. The uncoated nature of this grade emphasises the sharpness of the edge rather than thermal barrier properties, which is beneficial in continuous, low‑to‑medium cutting speed finishing operations. The double‑sided chipbreaker further assists in creating short, controllable chips for uninterrupted turning and easier machine handling. Productivity and application guidance for production environments When used for external and internal turning with small depths of cut, the insert contributes to shorter cycle times through improved cutting stability and less secondary finishing. The rhombic form and optimised chip control minimise rework and support predictable tool life in stable setups. For best results, match the insert to a compatible holder considering form, relief, tolerance class, fastening method, size and thickness; this ensures full benefit from the insert’s geometry and the NS9530 finishing properties. Contact Metav Werkzeuge for tailored tooling recommendations and rapid supply of Tungaloy inserts; application advice and specification support are available from our technical team Technical data Article number: 6950936 SKU: 6950936-Tungaloy Manufacturer SKU: TUN6950936 Manufacturer item number: 6950936 Facts Insert designation: DNMG150402 Grade: NS9530 Corner radius: 0.2 mm Relief angle: 0° Lead/approach angle: 55° Plate thickness: 4.76 mm Size: 15 mm Special features Uncoated cermet finishing grade Rhombic plate form Double-sided chipbreaker Cylindrical hole ISO DNMG series Intended application: Turning FAQ What materials is this insert intended for? The DNMG150402 NS9530 insert is a finishing grade optimised for steel and comparable workpiece materials where a sharp edge and low cutting forces are required. Can the insert be used for both external and internal turning? Yes, the geometry and chip control of this DNMG form make it suitable for both external and internal turning operations when matched with the correct holder. How does the uncoated cermet grade affect cutting parameters? Uncoated cermet like NS9530 favours lower cutting forces and a sharper edge; feed and speed should be tuned for finishing, with attention to stable conditions to exploit its surface‑quality advantages. Is the insert indexable on both sides? The item features a double‑sided chipbreaker, allowing indexable use as per the DNMG form and standard clamping practice. Which insert dimensions determine holder compatibility? Compatibility depends on form (DNMG), size (15), thickness (4.76 mm), hole style (cylindrical) and relief angle; these parameters should match the chosen toolholder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, precision ISO geometry and stable clamping for reliable finishing performance in turning operations — order directly via Metav Werkzeuge or consult the team for application support. DNMG150402 NS9530 — Tungaloy ISO turning insert for finishing The DNMG150402 NS9530 is an ISO-format, rhombic cutting insert designed for precision turning and fine finishing of steel components, offering a sharp edge and low cutting forces for continuous cuts and small depths of cut. Finishing-grade uncoated cermet ISO DNMG 150402 format Cylindrical hole for secure clamping Sharp edge for low cutting forces High-precision finishing for steel components This insert is a dedicated finishing solution that combines the low-friction, wear-resistant properties of cermet with an optimised geometry to deliver consistent surface quality. The cutting grade is engineered for continuous cutting where repeatable finish and minimal rubbing are essential; as a result, machinists will notice reduced burr formation and improved workpiece tolerances. The use of a finishing grade also means cutting parameters can be tuned for surface integrity rather than heavy material removal, making it suitable for final passes and high-value components. Compatibility and secure clamping for stable processes Compatibility with toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole and standard ISO DNMG form, enabling positive seating in many external holders and boring bars. The 0.2 mm corner radius and 0° relief angle contribute to predictable engagement and minimal deflection under light cutting forces. This combination supports stable cutting conditions, reduces chatter risk and supports reproducible component quality across batches. Efficiency gains and surface quality benefits A sharp cutting edge with low cutting forces shortens cycle times for finishing passes by allowing higher feed rates at small depths of cut while maintaining surface finish. The uncoated NS9530 grade is optimised for steel, providing low friction and edge retention in continuous operations; this translates into fewer tool changes and more productive machine time. Process engineers can therefore balance feed and speed to achieve the desired Ra values without excessive tool wear, improving overall cost-efficiency in serial production. When to select this grade for your turning tasks Choose this ISO-format insert for external and internal turning where fine surface finish and dimensional accuracy are priorities. The double-sided chipbreaker and the 4.76 mm plate thickness provide economical, reversible use while the rhombic shape and 55° included angle give access in constrained geometries. This insert is particularly suitable for small depths of cut and finishing passes on steel parts where a consistent, sharp cutting edge is required rather than aggressive material removal. For a tailored recommendation on using Tungaloy finishing grades or to order DNMG150402 NS9530 inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — the team will advise on holder compatibility and cutting data Technical data Article number: 6950952 Manufacturer SKU: TUN6950952 Model series: ISO turning inserts Format: DNMG150402 Material: carbide Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included angle: 55° Special features Grade: NS9530 Cutting material type: uncoated cermet Hole: with hole (cylindrical hole) Chipbreaker: double-sided Plate shape: rhombic Application: turning Typical use: finishing for steel, continuous cuts, small depths of cut FAQ What machining tasks is this insert best suited for? This insert is intended for finishing and fine turning of steel components; the DNMG150402 NS9530 grade offers a sharp edge and low cutting forces suitable for continuous cuts and small depths of cut. Is the insert reversible and economical to use? Yes, the rhombic, double-sided design allows indexable use; the plate thickness and double-sided chipbreaker support economical turning operations. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the cylindrical hole and ISO DNMG form allow use with standard external holders and boring bars designed for DNMG inserts. Does the insert have a coating? No, this is an uncoated cermet grade (NS9530), optimised for finishing applications on steel. How does the 0.2 mm corner radius affect performance? A 0.2 mm radius supports fine surface finishes and lower cutting forces, making it ideal for final passes where dimensional accuracy and surface quality are important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing and low cutting forces thanks to the sharp-edge NS9530 grade and the small 0.2 mm nose radius; the result is improved surface quality and stable cutting in continuous operations. Combine this performance with ISO compatibility and straightforward toolholding for a reliable production flow — order the insert through Metav Werkzeuge or ask the consultants for application advice. DNMG 150402 NS9530 Tungaloy turning insert — ISO rhombic, 55° The DNMG150402 NS9530 is an ISO rhombic finishing insert for turning steel, optimised for continuous cuts and small depths of cut ISO rhombic 55° geometry Uncoated cermet NS9530 finishing grade 0.2 mm nose radius for fine finish Double-sided chipbreaker, with cylindrical hole High-precision finishing for steel components The combination of the NS9530 uncoated cermet grade with a sharp cutting edge provides low cutting forces and a consistently high surface finish on steel workpieces. The 0.2 mm corner radius supports delicate contouring and small-depth passes while the 55° lead angle reduces radial cutting load, which helps to minimise vibration in less rigid setups. This results in predictable dimensional outcomes and a superior surface without aggressive cutting parameters, making the insert well suited to finishing operations where consistency and part quality matter. Process reliability and productivity gains A double-sided chipbreaker and robust substrate deliver stable chip formation and reproducible performance during continuous turning cycles. The uncoated cermet composition combines wear resistance with a sharp edge, reducing the need for frequent edge changes and contributing to efficient cycle times. By keeping cutting forces low and surface integrity high, this grade supports longer uninterrupted runs and lower rework rates — a rational, cost-effective choice for manufacturers seeking both quality and throughput. Seamless integration with ISO tool systems Compatibility with toolholders is determined by form, relief angle, tolerance class, clamping method, size and thickness; the insert fits established ISO clamping systems when paired with a suitable external holder or boring bar. The plate is supplied in rhombic geometry with a cylindrical hole and a plate thickness of 4.76 mm, nominal size 15, enabling straightforward replacement and secure fastening. Select the appropriate chipbreaker style and insert grade to match material, cut type and machine rigidity for optimal results. For technical recommendations or to specify DNMG150402 NS9530 inserts from Tungaloy for a given application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best configuration for the process. Technical data Article number: 6966116 SKU: 6966116-Tungaloy Model series: ISO-Drehwendeschneidplatten Product designation: DNMG150402 NS9530 Tungaloy insert Facts Size: 15 Plate thickness: 4.76 mm Corner radius: 0.2 mm Lead angle: 55° Rake angle (clearance): 0° Special features Material: carbide Cutting grade: uncoated cermet NS9530 Chipbreaker: double-sided Shape: rhombic Hole: with cylindrical hole Application: turning Typical use: finishing steel, continuous cuts, small depths of cut FAQ What materials is this insert intended for? The DNMG150402 NS9530 is a finishing grade designed primarily for steel; the uncoated cermet composition promotes a sharp edge and low cutting forces for high surface quality. How does the chip control work with this insert? Chip control is provided by a double-sided chipbreaker; the geometry supports stable chip formation in continuous turning applications. Which toolholders are compatible with the insert? Compatibility depends on holder form, relief angle, tolerance class, clamping and size; the insert conforms to ISO rhombic standards and fits matching external holders or boring bars. What are the key dimensional data to check before ordering? Important dimensions include plate size 15, thickness 4.76 mm, corner radius 0.2 mm, and the 55° lead angle; verify these against the holder specification. Is the NS9530 grade suited to interrupted cuts? NS9530 is optimised as a finishing grade for continuous cuts and small depths; for heavily interrupted cuts a different grade with higher toughness may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 T6215 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and a rhombic ISO geometry ensures reliable performance when turning stainless steel; the double-sided chipbreaker and cylindrical hole deliver stable clamping and economical edge utilisation. Order the DNMG150402 T6215 turning insert directly via Metav Werkzeuge or consult the team for application advice. DNMG 150402 T6215 turning insert for turning – Tungaloy The DNMG150402 T6215 is an ISO indexable turning insert designed for turning stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide for high wear resistance Rhombic 55° seating angle for versatile turning Double-sided chipbreaker for economical edge use Cylindrical hole for secure clamping Consistent wear resistance and surface quality The combination of a CVD-coated finish with a carbide substrate in grade T6215 provides a wear-resistant cutting edge that suits the demands of machining stainless steel. The coating reduces adhesion and built-up edge formation when machining tough, work-hardening alloys, which helps to preserve edge geometry over time. As a result, the tool delivers more consistent part-to-part surface quality and extended indexable life compared with uncoated grades. For production environments seeking predictable tool change intervals and reduced rework, this translates into measurable process stability and lower overall machining cost. Secure seating and versatile holder compatibility The insert follows the ISO DNMG geometry, with a rhombic profile and a 55° seating angle, making it compatible with standard external holders and boring bars that accept ISO DNMG inserts. The cylindrical hole provides reliable clamping and repeatable orientation, while the specified 0° clearance and the 0.2 mm corner radius support controlled cutting forces and good edge strength for general turning tasks. When selecting a holder, verify form, free-angle, tolerance class, fastening method and plate thickness to ensure interchangeability; matching these parameters ensures the insert performs to its rated potential and avoids unforeseen runout or instability. Economical use and recommended applications Featuring a double-sided chipbreaker, the insert offers two indexed cutting edges, which reduces tooling cost per edge. The nominal plate thickness of 4.76 mm and the plate size of 15 mm deliver sufficient rigidity for external and internal turning applications where stable to slightly interrupted cuts occur. Typical use cases include finishing and medium-duty roughing of stainless steel components, where balanced edge life and surface finish are priorities. For less stable setups or heavier interruptions, selecting a more robust grade or a larger corner radius will enhance reliability. For unfamiliar combinations of workpiece material and clamping, request a process recommendation to match chipbreaker, grade and machining parameters. Contact Metav Werkzeuge for tailored advice on using the Tungaloy DNMG150402 T6215 insert in your turning processes or to order via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6950932 SKU (manufacturer): TUN6950932 SKU (seller): 6950932-Tungaloy Manufacturer: Tungaloy Facts Geometry / ISO: 150402 Corner radius: 0.2 mm Seating angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features Grade/coating: T6215 (CVD-coated carbide) Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Intended use: turning (external and internal) Model series: ISO indexable turning inserts FAQ What materials is this insert designed to machine? The DNMG150402 T6215 insert is formulated for machining stainless steel; the CVD-coated carbide grade provides wear resistance suitable for stable to slightly interrupted turning of rostfreiem Stahl. How many usable edges does the insert provide? The insert has a double-sided chipbreaker and a rhombic form, giving two usable cutting edges per side and therefore multiple index positions for economical edge usage on the DNMG150402 T6215. Which holders are compatible with this ISO geometry? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; standard holders and boring bars designed for ISO DNMG150402 geometry will accept this Tungaloy insert. What advantages does the T6215 grade offer compared with uncoated carbide? T6215 is a CVD-coated carbide grade engineered for enhanced wear resistance and reduced built-up edge during stainless steel turning, resulting in longer edge life and more consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T6215 grade and the ISO DNMG150402 form for reliable turning operations on stainless steels; the combination of wear resistance, double-sided chipbreaker economy and consistent geometry supports a smooth production flow. Order the insert via Metav Werkzeuge or ask our consultants for matching holders and clamping advice. DNMG150402 T6215 Tungaloy turning insert — CVD-coated carbide, 55° rhombic The DNMG150402 T6215 is an ISO rhombic, indexable turning insert intended for external and internal turning of stainless steels under stable to slightly interrupted conditions. ISO rhombic DNMG 55° geometry CVD-coated carbide T6215 for stainless steel Double-sided chipbreaker, cylindric hole Corner radius 0.2 mm, plate thickness 4.76 mm Consistent performance for stainless-steel turning The CVD-coated carbide composition T6215 provides enhanced wear resistance and a controlled cutting-edge behaviour that is particularly suited to stainless steels. The coating reduces adhesive wear and helps maintain a stable cutting edge in continuous operations, which results in more consistent component dimensions and surface finishes. As a rhombic indexable insert with a 55° geometry, the component balances edge strength and accessibility, making it a practical choice where both roughing and light finishing passes are required. Clear compatibility and reliable clamping This insert conforms to the ISO series for indexable turning plates; compatibility with a holder is determined by the insert form, relief angle (0°), tolerance class, fastening method, size and thickness. The rhombic shape with a cylindric hole and the specified plate thickness of 4.76 mm ensure secure seating in standard DNMG seats. The double-sided design doubles the usable edges, while the precise corner radius 0.2 mm supports repeatable seating accuracy and predictable cutting behaviour when mounted in a correctly rated turning toolholder. Productivity advantages and predictable tool life A wear-resistant carbide substrate combined with the CVD finish yields improved tool life in many stainless-steel applications compared with uncoated grades. The double-sided chipbreaker promotes stable chip formation across cutting conditions, lowering the risk of edge damage in lightly interrupted cuts and supporting higher material-removal rates in steady setups. Economically, the reversible nature of the insert and the grade’s resistance to adhesive wear contribute to fewer indexings and more uptime on the machine. Practical selection and machining guidance Choose the double-sided chipbreaker variant when processing long, ductile chips typical of many stainless-steel alloys; select a larger corner radius for enhanced edge strength if heavier cuts are required. Because the insert is optimised for stable to slightly interrupted turning, ensure rigid clamping and correct holder match to benefit fully from the grade’s properties. For cutting parameters, correlate feed and depth with the desired surface finish and the insert’s 0.2 mm corner radius, and consult tooling guides for speed ranges suited to the stainless-steel grade in use. For reliable stainless-steel turning with the Tungaloy DNMG150402 T6215 insert, contact Metav Werkzeuge for ordering and tailored tooling recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966110 SKU: 6966110-Tungaloy Manufacturer SKU: TUN6966110 Model series: ISO turning indexable inserts Material: Carbide Facts Geometry angle: 55° Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Manufacturer article number: 6966110 Special features Coating: CVD-coated carbide (T6215) Chipbreaker: Double-sided Hole: Cylindric hole Plate form: Rhombic Application: Turning (external and internal) System composition: ISO indexable plate, matching outer holder or boring bar, shim/clamp set, replacement screws FAQ What materials is the DNMG150402 T6215 insert suitable for? The DNMG150402 T6215 Tungaloy turning insert is designed primarily for stainless steels, offering good wear resistance and stable chip control in those materials. How does the T6215 grade affect tool life? The CVD-coated T6215 grade on the DNMG150402 insert enhances resistance to adhesive and abrasive wear, which generally extends tool life under stable turning conditions. Can the DNMG150402 insert be used on interrupted cuts? The DNMG150402 T6215 insert is intended for stable to slightly interrupted turning; for heavily interrupted cutting, select a geometry and corner radius designed for higher impact resistance. How is the insert mounted in the toolholder? The DNMG150402 Tungaloy insert fits ISO-compatible DNMG seats; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness—use the matching holder and clamp set for secure seating. What are the advantages of the double-sided chipbreaker on this insert? The double-sided chipbreaker on the DNMG150402 T6215 insert provides two usable edges and promotes consistent chip formation, which helps maintain surface quality and reduces the frequency of edge changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and the wear-resistant T6215 grade for dependable stainless-steel turning in stable or lightly interrupted cuts; the rhombic 55° geometry with a 0° clearance simplifies versatile external and internal turning. Order directly via Metav Werkzeuge or consult the technical team for holder compatibility and stocking options. DNMG 150402 T6215 — ISO rhombic turning insert (CVD-coated carbide) by Tungaloy, 55° The DNMG 150402 T6215 is an ISO rhombic turning insert designed for precise external and internal turning of stainless steels, combining a wear-resistant CVD-coated carbide substrate with a double-sided chipbreaker for controlled swarf formation CVD-coated carbide for high wear resistance Optimised for stainless steel turning Rhombic 55° geometry for versatile cuts Double-sided chipbreaker with cylindrical hole Consistent productivity through optimised grade and coating The combination of a CVD coating with a robust carbide substrate in grade T6215 yields predictable wear behaviour and extended tool life when machining stainless steels under stable or lightly interrupted conditions. The chemical vapour deposition layer reduces abrasive wear and enhances edge stability; this results in fewer indexings, lower tool-change frequency and improved process economy. For production environments seeking repeatable component quality, this wear-resistant grade supports longer runs and reduced tool inventory turnover. Geometry and clamping that reduce setup risk The rhombic DNMG form with a 55° approach angle and 0° clearance offers flexibility for a range of turning operations while maintaining cutting stability. Compatibility with the chosen holder depends on form, clearance angle, tolerance class, attachment, nominal size and thickness; matching these criteria ensures correct seat fit and secure clamping. The insert’s cylindrical hole and standard ISO dimensions simplify selection of a suitably rated external holder or boring bar, minimising set-up time and improving concentricity in high-precision turning tasks. Controlled chip formation and process safety A double-sided chipbreaker tailored to the grade promotes stable chip control across typical feed ranges for stainless steels, reducing the risk of built-up edge and improving surface finish. The chipformer geometry supports uninterrupted swarf evacuation and decreases vibration during cuts; as a consequence, cycle times can be tightened and downstream finishing effort reduced. In short, optimised chip control contributes directly to higher throughput and predictable component quality. Practical system considerations and handling benefits The insert is ISO-standardised and intended for use in a system comprising the correct external holder or boring bar, a support pad or clamp set and replacement screws where required. Being indexable on both sides increases cost-efficiency per edge and simplifies inventory management. For mixed batches or variable part runs, the combination of familiar ISO sizing and a rugged CVD-coated edge offers adaptability and reliable performance in production, maintenance and toolroom settings. For quick availability and application advice on the Tungaloy DNMG150402 T6215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — experts will advise on holder matching and stock status Technical data Article number: 6950948-Tungaloy Manufacturer article number: 6950948 Manufacturer SKU: TUN6950948 Core data ISO designation: DNMG150402 Size: 15 mm Thickness: 4.76 mm Cutting-edge radius: 0.2 mm Approach angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating: CVD-coated Grade: T6215 (wear-resistant for stainless steels) Chipbreaker: double-sided Plate form: rhombic Application: turning Model series: ISO turning inserts FAQ Which materials is this insert best suited for? The DNMG 150402 T6215 insert is formulated for stainless steels; the T6215 grade and CVD coating favour wear resistance and edge stability in stable to lightly interrupted turning operations. What does the DNMG150402 designation indicate? DNMG150402 denotes a rhombic insert with a 55° geometry and a 0.2 mm nose radius; the ISO sizing ensures compatibility with standard holders when form, clearance, tolerance and thickness are matched. How is the insert mounted and indexed? The insert has a cylindrical hole for secure clamping and is double-sided, allowing rotation to a fresh cutting edge; thickness 4.76 mm supports robust clamping in appropriate external holders or boring bars. What are the advantages of the CVD coating on grade T6215? The CVD coating on the T6215 carbide promotes improved abrasive wear resistance and stable cutting-edge behaviour, which extends edge life and helps maintain consistent surface quality across runs. Can this insert be used for internal turning as well as external turning? Yes — the geometry and ISO form make the insert suitable for both external and internal turning applications, provided a compatible holder or boring bar is selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 T9215 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide performance and ISO compatibility to boost productivity in medium steel turning; the robust T9215 grade delivers wear resistance and fracture toughness for continuous to lightly interrupted cuts. Order the DNMG150402 directly via Metav Werkzeuge or ask the consultants for application-specific advice by email or phone. DNMG 150402 T9215 — Turning insert by Tungaloy A DNMG150402 T9215 ISO rhombic indexable insert engineered for external and internal turning in medium steel applications ISO rhombic DNMG geometry with 55° included angle CVD-coated T9215 grade for medium steel Double-sided chipbreaker with cylindrical hole Corner radius 0.2 mm, plate thickness 4.76 mm Maximise productivity with a grade tuned for steel turning The combination of a CVD-coated surface and a wear-resistant carbide substrate in the T9215 grade delivers a reliable balance of abrasion resistance and toughness. This makes the insert particularly suitable for productive machining cycles on medium steels where continuous performance is required. The coating reduces flank wear while the substrate resists chipping, which together help to maintain dimensional stability and extend effective tool life — a clear advantage for high-volume turning operations. Dependable geometry for repeatable clamping and surface quality Built to ISO standards, the rhombic form and 55° included angle simplify holder selection and inventory management across toolrooms. The 0° clearance and a controlled corner radius 0.2 mm provide a predictable cutting edge, supporting consistent surface finish and part tolerances. The double-sided chipbreaker design and the cylindrical hole ensure secure locating and fast indexing, which reduces downtime during tool changes and supports repeatable setup behaviour in series production. Practical setup advice to exploit the grade’s strengths For stable process results, mount the insert in a stiff external holder or compatible boring bar and secure it with the appropriate clamp and screw set. The insert functions as part of a system that includes the ISO plate, the matching holder, and the fastening hardware; compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness. Selecting the correct chipbreaker variant and maintaining machine and tooling rigidity will make the most of the T9215 grade’s wear resistance, delivering improved tool life and consistent surface integrity during medium steel turning. Contact Metav Werkzeuge for matched holders and original Tungaloy DNMG150402 T9215 inserts, or request tailored advice on optimising the T9215 grade for specific turning tasks Technical Data Article number: 6950945 SKU: 6950945-Tungaloy Manufacturer SKU: TUN6950945 Model series: ISO-Drehwendeschneidplatten Article name: DNMG150402 T9215 Tungaloy-Wendeplatte Dimensions & Core Data Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 55° Clearance angle: 0° Shape: Rhombic Features & Compatibility Material: carbide (Hartmetall) Coating/grade: CVD-coated, T9215 Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) Compatibility determined by form, clearance, tolerance, fixing, size and thickness FAQ Which turning tasks is this insert suited for? The DNMG150402 T9215 insert is designed for external and internal turning, especially on medium steels where continuous to lightly interrupted cuts are common. What are the key geometric specifications to consider? Key specs are the ISO rhombic form, 55° included angle, 0° clearance, corner radius 0.2 mm, plate thickness 4.76 mm and a cylindrical locating hole as found on the DNMG150402 T9215. What does the T9215 grade offer compared with other grades? T9215 is a CVD-coated carbide grade that balances high wear resistance with fracture toughness, making it a preferred choice for productive medium steel machining with stable cutting conditions. How should the insert be mounted to ensure stability? Mount the DNMG150402 T9215 in a compatible ISO holder or boring bar with the correct clamp set and fastening screw; secure clamping and a rigid tool setup are essential to exploit the grade’s wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 T9215 Wendeplatten - Tungaloy
Combining T9215 CVD-coated carbide with a rhombic 55° geometry and a 0.2 mm corner radius delivers durable cutting performance, consistent chip control and efficient edge life for medium-steel turning; order the DNMG150402 T9215 insert directly via Metav Werkzeuge or ask Metav Werkzeuge consultants if needed DNMG 150402 T9215 turning indexable insert by Tungaloy — CVD-coated carbide, rhombic 55° geometry DNMG150402 T9215 is an ISO-standard rhombic, double-sided turning insert designed for medium-steel machining, optimised for continuous to slightly interrupted cuts and secure clamping in ISO-compatible holders ISO-compatible DNMG150402 geometry CVD-coated carbide grade T9215 0.2 mm corner radius for fine finishing Double-sided chipbreaker with cylindrical hole High productivity from the T9215 coating and carbide substrate The combination of a CVD-coated carbide substrate and the T9215 grade is engineered to provide a balanced mix of wear resistance and fracture toughness for medium-steel applications. This results in longer edge life under stable cutting conditions and fewer tool changes per shift, which improves overall productivity. The coating reduces adhesion and abrasion at the cutting edge, while the carbide core sustains cutting forces, making the system particularly well suited to continuous turning and light interruptions without sacrificing component quality. Geometry and clamping that support consistent surface quality The insert’s rhombic 55° geometry and 0° clearance angle produce predictable cutting forces and a favourable approach for both external and internal turning. The 0.2 mm corner radius helps achieve a controlled surface finish while still allowing for modest depth of cut. The plate thickness of 4.76 mm and the cylindrical through-hole provide robust, repeatable clamping in compatible ISO holders; compatibility is determined by matching form, free angle, tolerance class, fixing method, size and thickness to the chosen holder. These design choices together reduce vibration and help maintain dimensional accuracy across production runs. System benefits and recommended applications for machining shops As part of an ISO insert system, the plate works with a matching external holder or boring bar, plus a suitable clamp set and retaining screw for safe fixation. The double-sided chipbreaker supports reliable chip formation and evacuation, lowering the risk of built-up edge and improving tool life per index. Typical uses include general turning tasks on medium-carbon steels where a cost-effective, high-productivity solution is required. For specific material mixes or more heavily interrupted cuts, select the correct chipbreaker and grade combination to match stability and cutting conditions; Metav Werkzeuge consultants can advise on holder pairing and process parameters. For machining operations seeking a durable, high-productivity solution with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored holder recommendations and application advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6950930 Manufacturer SKU: TUN6950930 Material: CVD-coated carbide Model series: ISO turning indexable inserts Application: Turning Facts Insert designation: DNMG150402 Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Lead/approach angle: 55° Clearance angle: 0° Special features Rhombic insert shape Double-sided chipbreaker Cylindrical through-hole for secure clamping Grade: T9215 — optimised for medium steel, continuous to slightly interrupted cuts System composition: insert, matching holder or boring bar, clamp set and replacement screws FAQ What materials is this insert best suited for? The DNMG150402 T9215 insert is optimised for medium-steel machining; the T9215 grade combines wear resistance and toughness for productive turning. Can the insert handle interrupted cuts? The T9215 grade and double-sided chipbreaker tolerate light to slight interruptions; for heavily interrupted applications, a more robust setup or alternate grade is recommended. How many cutting edges are available per insert? The rhombic, double-sided geometry provides two usable cutting edges per index, doubling effective life before replacement. What should be checked when selecting a compatible holder? Compatibility depends on matching the insert form, clearance angle, tolerance class, fixing method, size and thickness to the holder; ensure the holder accepts DNMG inserts with the specified through-hole style. Is this insert suitable for internal turning and boring operations? Yes; the insert’s geometry and thickness make it appropriate for both external and internal turning when mounted in the correct ISO-compatible boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable fracture control and precise ISO compatibility for consistent turning results. The carbide grade T9215 and CVD coating support productive, continuous to lightly interrupted cuts in medium steel, while the rhombic form ensures stable seating in standard holders. Order the DNMG150402 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150402 T9215 Turning Insert – Tungaloy The DNMG150402 T9215 is an ISO rhombic, double-sided indexable insert for external and internal turning, engineered for medium-steel machining where productivity and tool life are priorities CVD-coated carbide grade T9215 Compatible with ISO DNMG holders Double-sided chipbreaker design Rhombic 55° geometry for versatile turning Productive turning for medium steels The insert is based on a CVD-coated carbide substrate that combines wear resistance with reliable edge strength, making it a sound choice for medium steel applications. The coating enhances thermal stability and reduces flank wear, enabling longer tool life under continuous cutting conditions. For production environments seeking predictable results, this geometry and grade deliver measurable improvements in uptime and component consistency. Mounting and compatibility explained Compatibility with a toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness. The rhombic 55° ISO DNMG form and a 0° relief ensure a standard seating profile in most DNMG holders; the insert is supplied with a cylindrical centre hole for secure clamping. When selecting a holder or boring bar, match the insert's profile and thickness to guarantee repeatable clamping and axial stability during turning operations. How the design supports chip control and finish The double-sided chipbreaker and a modest 0.2 mm corner radius provide a balance between surface finish and edge strength. A smaller radius improves edge robustness in interrupted cuts, while the chipbreaker geometry guides swarf away from the cutting zone to reduce recutting and thermal load. In practice, this results in consistent surface quality and less downtime for clearing swarf in medium-duty turning tasks. Practical selection and process benefits Choosing this grade allows for an economical mix of performance and predictability: T9215 is optimised for medium steels, delivering stable wear patterns and resistance to chipping under typical feed and speed ranges. The rhombic shape and standard thickness of 4.76 mm support easy indexation and cost-effective use of both cutting edges. For operations aiming to increase throughput without frequent insert changes, this configuration offers a pragmatic route to higher productivity. For tailored advice on integrating the Tungaloy DNMG150402 T9215 into existing turning setups, contact Metav Werkzeuge for specification support and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966108 Manufacturer SKU: TUN6966108 Seller SKU: 6966108-Tungaloy Model series: ISO turning indexable inserts Core data Size: 15 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Insert angle: 55° Design / Special features Material: Carbide Coating: CVD Shape: Rhombic (55°) Hole: with cylindrical hole Chipbreaker: Double-sided Grade: T9215 ISO designation: DNMG150402 FAQ Is the insert suitable for both external and internal turning? Yes. The DNMG150402 T9215 indexable insert is designed for external and internal turning operations and its rhombic 55° geometry supports versatile use. What materials is this grade best for? The T9215 carbide grade with CVD coating is optimised for medium steel machining, offering a balance of wear resistance and fracture safety for continuous to lightly interrupted cuts. How is holder compatibility ensured? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the DNMG150402 form matches standard DNMG holders when these parameters are observed. Can the insert be indexed to use multiple edges? Yes. The double-sided, rhombic design allows indexation to access fresh cutting edges, improving economy and utilisation of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 T9225 Wendeplatten - Tungaloy
Robust ISO-standard turning insert with a CVD-coated carbide substrate and the T9225 universal grade, engineered for reliable performance in medium to heavy steel machining; the 55° rhombic geometry and 0.2 mm corner radius deliver controlled finishing and predictable tool life. Order the DNMG150402 T9225 directly via Metav Werkzeuge or ask our consultants if needed. DNMG150402 T9225 Turning insert (CVD-coated carbide) — Tungaloy DNMG150402 T9225 is an ISO-standard rhombic turning insert intended for stable external and internal turning operations, designed to perform under varying engagement conditions and light interruptions. CVD-coated carbide for durable cutting performance ISO-standard 55° rhombic geometry for versatility Double-sided chipbreaker for extended usability 0.2 mm corner radius for controlled surface finish Consistent cutting performance for demanding steel work The combination of CVD-coated carbide and the T9225 grade provides a practical balance of hardness and toughness, making this insert especially suitable for medium to heavy steel machining. The CVD coating enhances wear resistance under elevated temperatures, while the robust universal grade absorbs fluctuating cutting forces common in production environments. This results in fewer unexpected tool changes and more predictable cycle times, supporting efficient shop-floor processes and improved machine uptime. System compatibility that simplifies tool selection Supplied to the ISO-standard, the insert integrates into established systems where compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness. The insert forms one part of a matched set comprising the insert, a suitable external holder or boring bar, a shim/clamp and replacement screws. Selecting the appropriate chipbreaker and grade according to workpiece material and machining stability ensures consistent cutting behaviour and reduces set-up iteration, which benefits process reproducibility and reduces production risk. Geometry tailored to finish and stability The 55° rhombic geometry combines positive cutting engagement with accessibility for external and internal contours, while the 0.2 mm corner radius allows for fine finishing and predictable surface quality. The double-sided chipbreaker affords economical use of both indexable sides, and the cylindrical hole secures the insert axially for reliable positioning. Together these features minimise vibration sensitivity and promote steady metal removal, which is particularly advantageous when dimensional tolerances and surface integrity matter. Practical advantages for workshop productivity Chosen for its capacity to cope with light interruptions and variable entry conditions, this insert supports reduced downtime and sensible tooling costs through extended edge life and reuse. The ISO designation and standardised form make stock management simpler, while the grade’s balance of toughness and wear resistance improves resilience in less predictable cutting scenarios. If clarification is needed about holder matching or selecting the optimal chipbreaker, Metav Werkzeuge can provide technical guidance and recommendations tailored to specific machining set-ups — ensuring the insert is applied where it delivers best value and consistent results. For application advice or to secure DNMG150402 T9225 from Tungaloy, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support and ordering assistance Technical Data Article number: 6950947 Manufacturer SKU: TUN6950947 SKU: 6950947-Tungaloy Model series: ISO turning inserts Material: carbide Manufacturer: Tungaloy Core specifications Inscribed circle: 15 mm Thickness: 4.76 mm Cutting angle: 55° Relief angle: 0° Corner radius: 0.2 mm Special features ISO designation: DNMG150402 Grade: T9225 Coating: CVD-coated carbide Shape: rhombic Chipbreaker: double-sided Hole: with cylindrical hole Typical application: turning System composition: insert, holder/boring bar, shim/clamp, replacement screws FAQ What materials is this insert best suited for? The DNMG150402 T9225 insert is optimised for medium to heavy steel machining, where the CVD-coated carbide and T9225 grade combine to balance wear resistance and toughness. Can this insert handle interrupted cuts? Yes. The T9225 grade is formulated to tolerate light interruptions and changing engagement conditions, offering improved resistance to shock compared with purely hard grades. Is the geometry compatible with standard toolholders? The insert follows ISO standards, so compatibility with holders is defined by form, relief angle, tolerance class, clamping and thickness; matching the holder type ensures correct performance. How does the coating benefit production? The CVD coating increases wear resistance at elevated temperatures and prolongs edge life, which contributes to longer tool life and fewer tool changes during production. Is the insert reversible and economical to use? The double-sided chipbreaker allows both cutting edges to be used, providing economical reuse and reducing per-edge costs in repetitive turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade optimised for medium-to-heavy steel work and a rhombic DNMG geometry with 55° cutting angle for reliable turning performance; order the insert directly via Metav Werkzeuge or contact the technical team for advice on holder compatibility and chipbreaker selection. DNMG150402 T9225 Tungaloy turning insert — CVD-coated carbide, 55° rhombic The DNMG150402 T9225 Tungaloy insert is an ISO rhombic indexable insert designed for external and internal turning applications in steel. CVD-coated carbide for durability Universal T9225 grade for steel Rhombic DNMG shape, 55° cutting angle Double-sided chipbreaker, cylindrical hole Reliable performance for medium-to-heavy steel turning The combination of a CVD-coated surface and a wear-resistant carbide substrate delivers a robust balance between tool life and toughness. The T9225 grade is engineered as a universal sort for medium-to-heavy steel machining, making it suitable where variable engagement or light interruptions occur. The double-sided chipbreaker promotes consistent chip control under changing cutting conditions, which supports steady material removal rates and reduces unexpected downtime. As a consequence, production runs benefit from improved process stability and predictable wear behaviour. ISO compatibility and straightforward integration into tool systems Manufactured to ISO dimensions, the insert integrates with holders and boring bars when compatibility parameters—such as form, 0° relief, tolerance class, clamping method, size and 4.76 mm thickness—match the toolholder. The presence of a cylindrical hole and standardised geometry simplifies replacement and inventory management within ISO-based tool systems. The insert forms part of a complete system that includes the indexable insert, a matched external holder or boring bar, shims/clamping sets and replacement screws, enabling fast, repeatable tool changes and reducing assembly time on the shop floor. Practical advantages and application guidance With a 0.2 mm radius and a 55° cutting angle, the rhombic geometry offers a compromise between strength at the cutting edge and surface finish capability for general turning tasks. The rhombic form is versatile for both finishing and light roughing when combined with the correct chipbreaker and cutting parameters. For interrupted cuts or less stable setups, the toughness of the T9225 grade helps maintain edge integrity. When configuring operations, select a chipbreaker and cutting data aligned to the workpiece material; this insert is particularly suited to a broad steel spectrum and will yield high process reliability when paired appropriately with a rigid holder. For tailored recommendations on holder matching, chipbreaker choice and batch supply of Tungaloy inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, application-focused support and order processing. Technical data Article number: 6950931 SKU: 6950931-Tungaloy Manufacturer SKU: TUN6950931 Manufacturer article number: 6950931 Manufacturer: Tungaloy Numbers / Core technical data Cutting angle: 55° Corner radius: 0.2 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Designs / Special features Rhombic plate shape (DNMG) Grade: T9225 Coating: CVD coating Material: carbide Double-sided chipbreaker Cylindrical hole ISO-compliant turning insert Application: turning (external and internal) FAQ What materials is this insert intended for? The DNMG150402 T9225 Tungaloy insert is intended primarily for steel machining and performs well in medium-to-heavy cutting tasks. Can this insert be used for interrupted cuts? Yes, the T9225 grade’s toughness and the CVD-coated carbide construction make the insert suitable for interrupted cuts and variable engagement conditions. How is holder compatibility determined for this insert? Compatibility depends on the insert form, 0° relief angle, tolerance class, clamping method, size and 4.76 mm thickness; matching these parameters ensures correct fit with the toolholder. Is the insert reversible or indexable? The insert is double-sided and indexable, allowing rotation to a fresh cutting edge to extend service life. Which chipbreaker should be chosen for general turning? Select a chipbreaker that matches workpiece material, depth of cut and machining stability; the double-sided chipbreaker supplied with this insert is a versatile option for general turning in steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150402 T9225 Wendeplatten - Tungaloy
Combining CVD-coated cemented carbide in the robust T9225 grade with a rhombic ISO geometry and a 0.2 mm corner radius, this insert delivers reliable performance for medium to heavy steel turning; order the inserts directly via Metav Werkzeuge or consult the specialists for process-matched recommendations. DNMG150402 T9225 — ISO rhombic indexable insert for turning by Tungaloy The DNMG150402 is an ISO-standard rhombic indexable insert engineered for turning operations, offering a tough CVD-coated cemented carbide grade suited to medium to heavy steel machining. *DNMG150402 geometry for versatile turning *CVD-coated cemented carbide grade T9225 for toughness *0° relief and 55° lead angle for stable cutting *Double-sided chipbreaker with central cylindrical hole for clamping Durable cutting performance that reduces tool changes The combination of a CVD-coated surface and cemented carbide substrate in the T9225 grade provides enhanced resistance to thermal wear while retaining increased toughness for interrupted cuts. This balance of properties translates into fewer tool changes and more consistent component quality during medium to heavy steel machining. The insert’s robust grade is designed to maintain a stable cutting edge under varying engagement conditions, which supports productivity and process reliability in batch and continuous turning applications. Stable clamping and ISO compatibility for predictable setup The rhombic plate form with a 55° lead angle and 0° relief creates a cutting geometry that reduces radial forces and supports accurate dimensioning on external and internal turning operations. With a plate thickness of 4.76 mm, a size of 15 mm and a 0.2 mm corner radius, the insert sits securely when used with a suitable external holder or boring bar; compatibility depends on matching the holder’s form, relief angle, tolerance class, fastening and plate size. The double-sided chipbreaker and the central cylindrical hole provide secure clamping and economical indexing, offering two usable edges per side to extend service life and lower tooling costs. Practical selection advice to increase uptime For best results with medium to heavy steel work, pair the insert’s T9225 grade with a chipbreaker suited to the intended feed and depth of cut; the double-sided design allows flexibility for finishing or roughing by selecting an appropriate cutting edge orientation. When conditions include slight interruptions, the increased toughness of the grade helps prevent premature fracture and improves process stability. For assembly, use the recommended underlay or clamp set and replacement screws matched to the holder; this ensures repeatable clamping force and consistent tool life. Technical consultation is available for selecting feeds, speeds and coolant strategies to match the machining scenario. Contact Metav Werkzeuge for application-specific advice or to secure DNMG150402 inserts; Metav Werkzeuge’s specialists provide fast technical support and delivery (+49 2822 7131930, info@metav-werkzeuge.com) Technical data Item number: 6966109-Tungaloy Manufacturer SKU: TUN6966109 Manufacturer article number: 6966109 Model series: ISO turning indexable inserts Designation: DNMG150402 T9225 Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Lead angle: 55° Hole: with cylindrical hole Cutting geometry: rhombic Chipbreaker: double-sided Special features CVD-coated cemented carbide grade T9225 Robust universal grade for medium to heavy steel machining ISO-standard indexable insert for turning Rhombic plate form with secure clamping Compatible with appropriate external holder or boring bar Intended application: turning FAQ What materials is the DNMG150402 T9225 best suited for? The DNMG150402 T9225 insert is optimised for medium to heavy steel machining thanks to its CVD-coated cemented carbide composition and robust chipbreaker design. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius on the DNMG150402 increases edge strength for interrupted cuts and heavy engagement, improving tool life while maintaining acceptable surface finish. Can the insert be used for both external and internal turning? Yes, the rhombic geometry and 55° lead angle make the DNMG150402 suitable for both external and internal turning when paired with the correct holder and clamping arrangement. How is the insert secured in the holder? The insert features a central cylindrical hole and is intended to be used with an appropriate underlay/clamp set and replacement screws to ensure secure clamping and repeatable positioning. What is the advantage of the double-sided chipbreaker? The double-sided chipbreaker on the DNMG150402 provides two effective cutting edges per side, supporting economical indexing and flexibility between roughing and finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH110 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that combines a sharp cutting edge with high process security; the rhombic 55° geometry and 0° clearance angle ensure predictable behaviour in external and internal turning. Order or request consultancy via Metav Werkzeuge for matching holders and clamping sets. DNMG 150404 AH110 Tungaloy insert — ISO turning insert with PVD-coated carbide and 0° clearance The DNMG150404 AH110 Tungaloy insert is an ISO‑standard rhombic indexable insert designed for precise external and internal turning where a sharp edge and robust process security are required. PVD-coated carbide AH110 grade Rhombic 55° geometry with 0° clearance Double-sided chipbreaker for consistent chips With cylindrical hole for secure clamping 0.4 mm corner radius for fine finishing Improved durability and cutting consistency for high-volume turning The combination of a PVD-coated carbide substrate and the AH110 grade provides pronounced resistance to wear and edge chipping, translating into longer tool life and fewer unexpected interruptions. In practice, the coating reduces adhesion and thermal wear while the carbide core maintains edge stability, which supports repeatable cycles on production runs. These material and coating characteristics deliver a measurable increase in operational uptime and consistent surface quality. Predictable mounting and reliable chip control reduce setup risk Compliance with the ISO designation ensures straightforward matching to compatible toolholders; compatibility depends on form, clearance, tolerance class, fixation, size and thickness. The rhombic 55° geometry combined with a double-sided chipbreaker offers reliable chip formation during both external and internal turning, while the 0° clearance angle is advantageous in specific fixture set-ups where axial engagement and small radial depths are used. Clear geometry and standard sizing simplify inventory and holder selection. Better finishes and controlled edge engagement for precision parts A 0.4 mm corner radius balances edge strength and surface finish, making the insert suitable for light finishing passes where dimensional accuracy and consistent roughness are priorities. The 4.76 mm plate thickness and the insert’s cylindrical hole provide secure clamping stability under typical turning forces, reducing chatter and improving process security. When paired with the correct holder and cutting parameters, this insert supports predictable tool wear and repeatable part quality across batch production. For application advice or to secure a supply of Tungaloy AH110 turning inserts, contact Metav Werkzeuge for tailored holder recommendations and compatibility checks. Technical data Article number: 6803299 Manufacturer SKU: TUN6803299 Model series: ISO turning inserts ISO designation: 150404 Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 55° Clearance angle: 0° Special features Carbide substrate PVD coating, grade AH110 Rhombic plate form With cylindrical hole Double-sided chipbreaker ISO‑standard indexable insert Suitable for external and internal turning FAQ What materials is this insert suitable for? The DNMG150404 AH110 Tungaloy insert is a wear‑ and chip‑resistant PVD‑coated carbide grade designed primarily for general turning operations; material suitability depends on the selected chipbreaker and machining parameters. How does the 0° clearance angle affect cutting? A 0° clearance angle influences the contact geometry between tool and workpiece; with this insert the arrangement helps in cases of axial engagement and controlled radial cuts, supporting stable edge contact and predictable tool behaviour. Is the DNMG150404 compatible with standard ISO holders? Yes, the ISO designation ensures compatibility with holders that match the form, tolerance class, fixation method, size and thickness specified for DNMG‑type inserts. What finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius provides a balance between edge strength and surface finish, typically producing fine finishing results when used with appropriate feeds and depths of cut. How does the AH110 grade improve process security? The AH110 grade combines a robust carbide core with a PVD surface layer to reduce edge breakage and wear, thereby increasing repeatability and reducing unscheduled tool changes for turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH110 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH110 carbide, a sharp cutting edge and ISO compatibility for reliable turning results; order the DNMG150404 AH110 indexable insert directly via Metav Werkzeuge or ask our consultants if needed DNMG150404 AH110 — Indexable Turning Insert, PVD-coated Carbide (Tungaloy) DNMG150404 AH110 — an ISO rhombic turning insert designed for external and internal turning in industrial machining. PVD-coated carbide AH110 for wear resistance Sharp cutting edge for consistent finishes ISO 55° rhombic geometry for general turning Double-sided chipbreaker, cylindrical hole Consistent cutting performance for industrial turning The combination of PVD-coated surface treatment and carbide substrate in this grade provides a balance of wear resistance and edge stability that supports steady-cycle production. The AH110 grade is formulated to be wear- and breakage-resistant, which helps maintain a sharp cutting edge over repeated cuts. As part of an ISO insert system, it contributes to predictable tool life and consistent surface finish when matched with the appropriate holder, insert seat and clamping hardware. Geometry that stabilises feed and surface quality Designed with a 55° rhombic outline and a 0.4 mm radius, the geometry of the insert helps to manage cutting forces and influences the achievable surface finish. The 0° relief angle and a plate thickness of 4.76 mm increase support in the seat and improve heat conduction away from the cutting zone, reducing the tendency for chipping under intermittent cuts. The central cylindrical hole and standard ISO form make the insert straightforward to locate and clamp in compatible external or internal turning holders. System integration and reliable chip control This component is intended for use in a complete tooling system—ISO insert, matching external holder or boring bar, support shim or clamp set, and replacement screws. The double-sided chipbreaker offers basic chip control and can be matched with the workpiece material and process stability for improved evacuation. Compatibility with ISO norms means rapid replacement and minimal machine downtime when the correct tolerances and clamping geometry are observed. Grade choice and process benefits explained The AH110 designation identifies a PVD-coated carbide grade optimised for operations where a sharp cutting edge and process security are required. PVD coatings provide a thin, hard layer that improves resistance to abrasive wear without excessively dulling the initial edge sharpness, helping to extend productive cutting life. When combined with the rhombic form and chipbreaker, the result is a versatile insert suitable for a range of general turning tasks while supporting efficient, repeatable manufacturing results. For application-specific recommendations or to obtain genuine Tungaloy indexable inserts, please contact Metav Werkzeuge for expert advice and supply coordination via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6803273 SKU: 6803273-Tungaloy Manufacturer SKU: TUN6803273 Model series: ISO-Drehwendeschneidplatten Facts Insert designation: DNMG150404 Grade / coating: AH110, PVD-coated carbide Corner radius: 0.4 mm Insert thickness: 4.76 mm Relief angle: 0° Shape angle: 55° Size: 15 mm Hole: with cylindrical hole Special features Rhombic insert geometry Double-sided chipbreaker ISO normed turning insert Intended application: turning (external and internal) Material: carbide (Hartmetall) Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suited for? The DNMG150404 AH110 indexable insert is a PVD-coated carbide grade designed for general turning; the AH110 grade is wear- and breakage-resistant and should be matched with the workpiece material and the chosen chipbreaker for optimal results. How can compatibility with existing holders be checked? Compatibility is determined by the insert form, 0° relief angle, tolerance class, clamping method, size and thickness; the DNMG150404 designation and the SKU 6803273-Tungaloy help to verify fit with ISO-compatible turning holders. What does the AH110 grade signify? AH110 denotes a PVD-coated carbide grade that emphasises edge sharpness and process security, offering resistance to wear and edge breakage in typical turning applications. Does the chipbreaker support good chip control? The double-sided chipbreaker on this insert provides basic chip control suitable for many external and internal turning tasks; matching the chipbreaker and grade to the workpiece material improves evacuation and productivity. Is the insert reversible or single-use per edge? This insert is designed as an ISO double-sided plate with chipbreaker on both faces; follow the tool system’s orientation and clamping instructions for correct indexing and use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide grade AH120, precise geometry and a double-sided chipbreaker for reliable, productive turning operations; order genuine Tungaloy indexable inserts through Metav Werkzeuge or contact the team for application advice. DNMG 150404 AH120 Tungaloy indexable insert — PVD-coated carbide, 0.4 mm corner radius The DNMG 150404 AH120 Tungaloy indexable insert is a rhombic, ISO‑standard turning insert for external and internal turning, designed to deliver process security where a sharp cutting edge and stable performance are required DNMG 150404 geometry, 55° rhombic shape PVD-coated carbide AH120, wear-resistant 0.4 mm corner radius for fine finishing Double-sided chipbreaker, cylindrical hole Optimised wear resistance and secure edge stability The combination of PVD-coated carbide and the AH120 grade provides a balance of wear resistance and fracture toughness that supports uninterrupted machining cycles. The coating reduces adhesive wear and enhances surface integrity, while the carbide substrate maintains a sharp edge for consistent cutting. This configuration is particularly valuable where process reliability and predictable tool life are priorities, because the insert tolerates varying cutting conditions while maintaining cutting-edge stability and reduced downtime. Geometry engineered for repeatable surface quality The 55° included angle and rhombic shape give a versatile clearance and approach geometry suited to a wide range of turning tasks, while the 0.4 mm corner radius helps achieve finer surface finishes without sacrificing strength at the corner. The 0° clearance angle and the insert’s precise dimensions support controlled tool engagement and steady chip flow. These geometric features together reduce the risk of chatter and enable consistent results when finishing or light- to medium‑duty turning operations are required. Economical handling and practical system integration As a double-sided, indexable insert, the component offers two usable cutting edges per side, effectively lowering cost per cutting edge and simplifying inventory management. The insert’s cylindrical hole and ISO‑compliant form ensure straightforward clamping in standard holders and boring bars, so replacement is fast and repeatable. The overall system—insert, holder, clamp set and screws—permits quick reconditioning of a turning setup and supports efficient tool change routines to keep machining throughput high. Clear application guidance and selection advice Intended for general turning operations, the insert is a practical choice for external and internal work where a sharp edge and process security are required. Selection of the double-sided chipbreaker and grade should be matched to the workpiece material, machining strategy and machine stability. For less experienced planners: choosing the right chip control geometry and cutting parameters will preserve the edge life of the insert and improve part quality while maintaining predictable machining cycles. Contact Metav Werkzeuge for expert advice and to secure genuine Tungaloy DNMG150404 AH120 indexable inserts tailored to the specific machining task Technical data Article number: 6811725 SKU: 6811725-Tungaloy Manufacturer SKU: TUN6811725 ISO designation: DNMG150404 Name: DNMG150404 AH120 Tungaloy indexable insert Application: turning Grade: AH120 Material: PVD-coated carbide Core specifications Corner radius: 0.4 mm Thickness: 4.76 mm Size: 15 mm Clearance angle: 0° Included angle: 55° Design and special features Rhombic insert shape Double-sided chipbreaker Cylindrical hole ISO-standard format Wear- and break-resistant grade AH120 PVD coating for improved wear control Suitable for external and internal turning FAQ What applications suit this insert best? The DNMG150404 AH120 Tungaloy indexable insert is intended for external and internal turning and performs well where a sharp cutting edge and process security are required. Is the insert reversible and how many cutting edges are available? Yes, the insert is double-sided and indexable, providing multiple usable cutting edges to reduce cost per edge and extend overall tool life. Which geometrical features influence the surface finish? The 0.4 mm corner radius and the 55° included angle contribute to finer surface finish and controlled cutting engagement, supporting repeatable part quality. How is compatibility with toolholders determined? Compatibility is determined by the ISO form, clearance angle, tolerance class, attachment and the insert’s size and thickness; the DNMG150404 form fits standard ISO holders and bore‑type clamping systems. Is this a genuine Tungaloy product? Yes, this listing refers to a genuine Tungaloy indexable insert (DNMG150404 AH120), SKU 6811725-Tungaloy, supplied new from the manufacturer. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH120 for wear resistance, a double-sided chipbreaker for reliable chip control and ISO compatibility for straightforward tool management — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150404 AH120 turning insert (PVD-coated carbide, 55°) — Tungaloy A DNMG150404 AH120 indexable insert engineered for external and internal turning, offering a 55° rhombic geometry and a double-sided chipbreaker for stable machining. PVD-coated carbide grade AH120 Double-sided chipbreaker for reliable chips Rhombic DNMG shape with 55° cutting angle Cylindrical hole for secure clamping High process reliability through advanced coating and grade The combination of PVD technology and carbide substrate in grade AH120 provides a wear- and fracture-resistant cutting edge that preserves sharpness under continuous operation. This results in more consistent cycle times and a predictable tool life profile, which supports production planning and reduces unscheduled interventions. The AH120 grade is specified where a sharp cutting edge and process security are required; the coating enhances edge stability and resistance to abrasive wear without compromising dimensional control. Straightforward integration with ISO tooling systems Manufactured to ISO standards, the insert fits into compatible holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The rhombic geometry with a 55° approach angle and the cylindrical hole give a secure mechanical interface that simplifies set-up and repeatability. Standardised dimensions reduce the variety of stocked items and shorten set-up time at changeovers, increasing machine availability and lowering logistical complexity. Consistent chip control and machining stability The double-sided chipbreaker is engineered to manage chip formation across a range of cutting conditions, promoting stable evacuation and reducing the risk of chip-related interruptions. Stable chip control contributes directly to surface quality and enables safer high-feed passes where machine and workpiece stability permit. Selecting the appropriate chipbreaker and grade in line with the machining method and equipment rigidity ensures predictable cutting forces and repeatable component quality. Practical benefits for workshop productivity By combining a robust coating system with proven insert geometry, the product supports productive turning operations with a focus on repeatability and tool economy. The standardised ISO form simplifies inventory management, while the build and geometry are tuned for reliable seating in appropriate holders. For operations that prioritise consistent finishes and reduced tool-related downtime, this insert represents a pragmatic choice that aligns tool performance with production targets. For procurement or machining guidance on Tungaloy AH120 turning inserts, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: 6803327 SKU: 6803327-Tungaloy Manufacturer SKU: TUN6803327 Model series: ISO-Drehwendeschneidplatten Label: DNMG150404 AH120 Tungaloy-Wendeplatte Facts Cutting angle: 55° Thickness: 4.76 mm Inscribed circle: 15 mm Corner radius: 0.4 mm Clearance angle: 0° Hole: with cylindrical hole Special features PVD-coated carbide (AH120) Double-sided chipbreaker Rhombic plate form (DNMG) ISO standardised turning insert Cylindrical hole for secure clamping FAQ Is the insert suitable for both external and internal turning? The DNMG150404 AH120 insert is intended for external and internal turning; compatibility with a specific holder is determined by form, clearance angle, tolerance class, fastening type, size and thickness. What advantages does the AH120 grade provide for turning? The AH120 grade delivers a wear- and fracture-resistant cutting edge with a PVD coating that maintains sharpness and supports process stability where a fine edge and consistent performance are required. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker promotes stable chip formation and evacuation, which improves surface finish consistency and reduces the likelihood of chip-related interruptions during turning. Will the insert fit standard ISO holders? The insert conforms to ISO turning insert standards; correct fitment depends on matching the holder by form, size (15 mm inscribed circle), thickness (4.76 mm) and fastening method. What does the cylindrical hole mean for clamping security? The cylindrical hole provides a defined seating and clamping interface that aids in repeatable positioning and secure retention in compatible clamps and toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH120 Wendeplatten - Tungaloy
Benefit from a combination of PVD-coated carbide durability, a sharp cutting edge and ISO-compliant geometry for consistent turning performance; order the insert directly via Metav Werkzeuge or consult the team for matching holders and process parameters. DNMG150404 AH120 Tungaloy indexable insert — rhombic 55° geometry, PVD-coated carbide for turning The DNMG150404 AH120 is an ISO-designated rhombic indexable insert for external and internal turning, engineered to deliver a sharp edge and high process security in industrial machining applications. PVD-coated carbide grade AH120 Sharp cutting edge, high process security Double-sided chipbreaker for versatility ISO DNMG150404, rhombic 55° geometry Consistent process security for demanding turning operations The rhombic 55° geometry combined with the PVD-coated carbide grade offers a balance between cutting-edge sharpness and resistance to wear and chipping. The coating reduces abrasive wear and helps maintain a consistent edge, which in turn stabilises cutting forces and minimises unexpected tool changes. The corner radius 0.4 mm supports stable finishing and medium-duty roughing operations while the 0° relief angle ensures secure engagement in many standard holders. These characteristics result in reproducible part quality and fewer scrap parts in series production, improving overall process reliability. Improved cutting performance and longer tool life Equipped with a double-sided chipbreaker, the insert provides two usable cutting edges per side, which increases effective tool life and reduces tooling costs per component. The 4.76 mm thickness and 15 mm size give structural rigidity for steady cuts, while the matching of chipbreaker and grade to the workpiece material enables controlled chip formation and heat management. The practical outcome is shorter cycle times and lower tooling expenditure through longer time between edge changes. Where process security and consistent surface finish matter, this geometry and grade combination is particularly efficient. Straightforward compatibility and fast tool changes The insert is ISO-compliant, so fitment is determined by form, relief angle, tolerance class, clamping style, size and thickness; the cylindrical hole supports secure clamping in standard indexable holders. Inventory management benefits from the standardised designation, making replacements quick and error-free. Selection of the correct chipbreaker and insert grade according to the workpiece and stability of the setup enables predictable results. For mixed-production shops that change materials and part families frequently, this insert simplifies tool management and reduces setup time while maintaining productivity. For precision turning with the Tungaloy AH120 grade, contact Metav Werkzeuge for personalised process advice or to place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6810193 SKU: 6810193-Tungaloy Manufacturer SKU: TUN6810193 Model series: ISO indexable turning inserts Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 mm Relief angle: 0° Insert angle: 55° Special features PVD-coated carbide (AH120) Double-sided chipbreaker Rhombic shape, with cylindrical hole Suitable for external and internal turning ISO designation DNMG150404 Sharp cutting edge and process-safe grade FAQ Which machining operations is this insert designed for? The DNMG150404 AH120 insert is intended for external and internal turning applications and is specified as an ISO indexable turning insert for general turning use. How does the AH120 PVD coating improve performance? The AH120 PVD-coated carbide combines wear resistance and edge strength to reduce abrasive wear and chipping, helping the DNMG150404 insert keep a sharp cutting edge for longer and improve process stability. Is the insert reversible and how many usable edges are available? The insert is double-sided with a chipbreaker on each usable face, offering multiple effective cutting edges and extending the service life before replacement. What determines compatibility with a turning holder? Compatibility depends on the insert form, relief angle, tolerance class, clamping method, size and thickness; the cylindrical hole supports secure clamping in standard indexable holders. What dimensions should be checked when ordering replacements? When replacing the insert, check the corner radius 0.4 mm, thickness 4.76 mm, 15 mm plate size and the 55° rhombic geometry to ensure correct fit and cutting behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com