DNMG 150404 AH8005 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide grade AH8005 and robust double-sided chipbreaker for stable, high-performance turning of heat-resistant alloys and hard materials; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. DNMG 150404 AH8005 Turning insert (ISO DNMG) — Tungaloy A DNMG150404 AH8005 indexable insert engineered for external and internal turning where wear resistance and stable chip control are required PVD-coated carbide for high wear resistance Suitable for heat-resistant alloys and hard materials Double-sided chipbreaker for repeatable cutting conditions Rhombic DNMG shape with 55° cutting angle Reliable wear resistance for demanding turning tasks The PVD-coated, carbide grade AH8005 delivers a combination of wear resistance and thermal stability that is particularly suited to machining heat-resistant alloys and harder workpiece materials. The coating process enhances surface hardness and reduces flank wear, which prolongs tool life under continuous, stable cutting conditions. As a result, production runs benefit from fewer insert changes and improved process reliability, supporting cost-efficient machining cycles. Consistent chip control and dimensional accuracy The insert’s double-sided chipbreaker geometry provides predictable chip formation and evacuation, reducing the risk of re-cutting and machine interruptions. The rhombic DNMG form with a 55° approach angle contributes to low cutting forces and consistent contact conditions, which in turn supports dimensional stability and surface finish. The 0° clearance angle permits secure seating in standard DNMG holders while maintaining the intended rake and shear characteristics. Application guidance and machining benefits Designed for turning operations, the grade AH8005 is optimised for stable setups and moderate to heavy cuts on heat-resistant alloys and hard materials. The combination of PVD-coated substrate and robust chipforming enables extended cutting intervals and reliable repeatability. Select a holder and clamping set that match the insert’s form, thickness and tolerance class; doing so ensures correct seat contact and safe, reproducible performance across batches. System compatibility and efficient workshop integration The insert is ISO‑standard and intended for use with compatible DNMG external holders or boring bars, plus appropriate backing pads, clamping sets and replacement screws as needed. With a 0.4 mm cutting-edge radius and a plate thickness of 4.76 mm, the geometry supports stable engagement and straightforward indexing on both sides. Stocking this insert simplifies inventory while offering flexibility across a range of turning tasks, enabling quicker changeovers and predictable output quality. Contact Metav Werkzeuge for tailored technical advice on the Tungaloy DNMG 150404 AH8005 insert; enquiries can be sent to info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6775762 Manufacturer SKU: TUN6775762 Merchant SKU: 6775762-Tungaloy Model series: ISO turning indexable inserts Dimensions & performance ISO designation: 150404 Cutting-edge radius: 0.4 mm Cutting angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Design & features Rhombic plate form (DNMG) PVD-coated carbide (AH8005) Double-sided chipbreaker With cylindrical hole Compatible with ISO DNMG holders Intended application: turning; suitable for heat-resistant alloys and hard materials FAQ What materials is this insert suitable for? The Tungaloy DNMG 150404 AH8005 insert is formulated for machining heat‑resistant alloys and harder workpiece materials, offering improved wear resistance under elevated temperatures. Is the insert indexable and reversible? Yes, the DNMG geometry is double‑sided and indexable; the AH8005 grade permits re‑indexing to a fresh cutting edge to extend service life. What are the key dimensional specifications to check for holder compatibility? Verify the ISO code 150404, plate thickness 4.76 mm, plate size 15 mm and the rhombic DNMG form when selecting a matching external holder or boring bar. Does the insert require a special clamping system? Standard DNMG clamping systems that accept a cylindrical hole and the specified thickness will secure the insert; ensure correct tolerance class and seat form for best performance. Can this insert improve process stability in serial production? Yes, the combination of PVD coating, carbide substrate and a controlled chipbreaker design supports repeatable cutting conditions and extended intervals between indexings. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8005 Wendeplatten - Tungaloy
Efficient, PVD-coated AH8005 carbide in ISO DNMG150404 format offers enhanced wear resistance and stable cutting when turning heat-resistant alloys; combine precise 0.4 mm corner geometry with a double-sided chipbreaker for productive finishing operations — order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150404 AH8005 indexable turning insert by Tungaloy — PVD-coated carbide for turning The DNMG150404 AH8005 is an ISO rhombic indexable turning insert engineered for stable, wear-resistant machining of heat-resistant alloys and other demanding workpieces during external and internal turning operations. PVD-coated AH8005 carbide for wear resistance ISO DNMG150404 rhombic geometry, 55° lead angle 0.4 mm corner radius for precise surface finish Double-sided insert with cylindrical locating hole High wear resistance for demanding materials The PVD-coated AH8005 grade provides a consistent balance between hardness and toughness, making this insert especially suited for machining heat-resistant alloys and harder materials under steady cutting conditions. The combination of a PVD-coated surface and a carbide substrate reduces flank wear and extends tool life, which translates into fewer tool changes and improved uptime. This effect is particularly beneficial in batch production and serial turning where reproducible results and reduced tooling costs are priorities. Geometry and mounting that ensure precision Designed in the ISO DNMG150404 format with a rhombic plateform and a 55° lead angle, the insert offers predictable cutting forces and accessible orientation for both external and internal turning. The 0.4 mm corner radius contributes to a refined surface finish while maintaining edge strength during finishing passes. The insert is supplied with a cylindrical locating hole, ensuring secure clamping and repeatable positioning in compatible holders and boring bars. Clear attention to form, relief angle and tolerance class supports straightforward integration into existing tool systems. Productivity advantages and process reliability Built for stable cutting, this indexable tool reduces vibration and provides consistent chip control when paired with the appropriate holder and clamping set. The double-sided chipbreaker allows economical use of both cutting edges before replacement, lowering cost per cut. Stable machining dynamics result in improved cycle times and more predictable batch quality, a rational advantage for shops focusing on throughput and margin. For customers seeking demonstrable process benefits, this insert improves machining consistency without increasing setup complexity. Selecting the right grade and handling recommendations The AH8005 grade is optimised for heat-resistant alloys and hard materials under stable machining conditions; for interrupted cuts or less rigid setups a different chipbreaker or a more impact-tolerant grade may be preferable. When mounting, ensure compatibility by matching the holder’s form, relief angle, tolerance class, fastening method, size and thickness to the insert’s ISO parameters. For further guidance on insert selection, cutting parameters and holder pairing, the supplier can provide technical data and practical tips to ensure the best combination of performance and tool life. For availability, application-specific recommendations or to order Tungaloy inserts, contact Metav Werkzeuge for expert consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our team will advise on the optimal setup for your turning operations Technical data Article number: 6741659 Manufacturer SKU: TUN6741659 Label: 6741659-Tungaloy Manufacturer: Tungaloy Core specifications ISO designation: DNMG150404 (150404) Shape/design: Rhombic, 55° lead angle Corner radius: 0.4 mm Thickness: 4.76 mm Materials & features Material: carbide Coating: PVD (AH8005) Chipbreaker: double-sided Hole: cylindrical locating hole Application: turning; external and internal turning FAQ What materials is this insert suited for? The DNMG150404 AH8005 insert is intended for machining heat-resistant alloys and other hard materials; the AH8005 PVD-coated carbide provides improved wear resistance under stable cutting conditions. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius helps achieve a finer surface finish while preserving edge strength; this geometry on the DNMG150404 format balances finishing quality and durability. Is the insert compatible with existing ISO holders? Compatibility depends on the holder’s form, relief angle, tolerance class and clamping method; the ISO DNMG150404 format and cylindrical locating hole ensure repeatable positioning in matching holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8005 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH8005 for consistently long tool life and rhombic 55° geometry for versatile turning strategies; this combination supports stable machining of heat-resistant alloys and hard materials. Order the insert directly via Metav Werkzeuge or consult its specialists for application-specific recommendations. DNMG 150404 AH8005 Tungaloy turning insert — PVD-coated carbide, rhombic 55° DNMG150404 AH8005 is a rhombic, ISO‑standard indexable insert for general turning applications, designed for stable machining of heat‑resistant alloys and other demanding materials. PVD-coated carbide grade AH8005 Suited for heat-resistant alloys and hard materials Rhombic 55° geometry for versatile cutting angles Double-sided chipbreaker, cylindrical hole Durable grade and coating for sustained production The PVD-coated carbide in grade AH8005 delivers elevated wear resistance and thermal stability, which reduces tool change frequency and contributes directly to higher machine utilisation. The rhombic 55° geometry balances strength and accessibility, allowing reliable engagement in both external and internal turning operations without compromising edge stability. This combination is particularly effective where consistent surface finish and predictable tool life are priorities, helping to lower overall machining costs through fewer interventions and steady cycle times. ISO compatibility and secure clamping for predictable results Built to fit ISO turning systems, the insert’s form, 0° clearance specification, tolerance class, clamping method, size and thickness determine holder compatibility; attention to these parameters ensures repeatable performance. The double-sided arrangement coupled with a cylindrical hole enables easy indexation and secure fastening in compatible holders, preserving the intended insert geometry during high‑pressure cuts. Clear information on dimensions and mounting style supports correct holder selection and reduces setup errors on the shopfloor. Practical advantages on the shopfloor and selection guidance As an indexable turning plate intended for demanding materials, the insert supports a focused machining strategy: choose the AH8005 grade for heat‑resistant alloys and harder workpiece materials, and select a chipbreaker matched to the feed and stability conditions for controlled chip formation. The term “chipbreaker” refers to a geometry that promotes predictable chip flow and reduces the risk of long, tangled chips. For bespoke process optimisation and material pairings, consult Metav Werkzeuge’s technical advice to align insert grade, chipbreaker type and holder stability with production goals. For proven durability and predictable performance with Tungaloy carbide AH8005, contact Metav Werkzeuge for availability and tailored application advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6936085 SKU: 6936085-Tungaloy Manufacturer SKU: TUN6936085 Facts Designation (ISO): 150404 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Approach angle: 55° With hole: yes Special features PVD-coated cemented carbide Grade AH8005 for heat-resistant alloys and hard materials Rhombic plate form Double-sided chipbreaker Cylindrical hole style ISO-standard turning indexable insert Intended application: Turning Compatibility determined by form, clearance, tolerance, clamping, size, thickness FAQ What materials is this insert suitable for? The DNMG150404 AH8005 Tungaloy turning insert is designed for heat‑resistant alloys and other harder materials; the AH8005 grade provides enhanced wear and thermal resistance for such applications. Is this insert compatible with standard ISO holders? Yes, the insert is ISO‑designated (150404) and compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness — matching these parameters ensures secure mounting. How does the double-sided chipbreaker affect tool life? The double-sided chipbreaker allows indexation of additional cutting edges, extending usable life per insert and enabling predictable chip control under suitable cutting conditions. What does the 55° geometry mean for cutting strategy? A 55° rhombic approach offers a balance between cutting edge strength and access to the cutting zone, making it versatile for both external and internal turning while supporting stable machining. Which features should be checked before mounting the insert? Verify the insert size (15 mm), thickness (4.76 mm), corner radius (0.4 mm), clearance angle (0°), hole style (cylindrical) and that the holder matches the ISO 150404 form. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH8015 carbide grade, a 55° rhombic geometry and a 0.4 mm corner radius to secure consistent surface finish and reliable tool life; order the DNMG150404 AH8015 insert directly via Metav Werkzeuge or consult the Metav team for application advice. DNMG150404 AH8015 Tungaloy turning insert — PVD-coated carbide, 55° rhombic DNMG150404 AH8015 is an ISO-standard indexable turning insert designed for external and internal turning, offering a balance of wear resistance and cutting-edge stability for heat-resistant alloys. ISO rhombic insert DNMG 55° geometry PVD-coated carbide AH8015 for heat-resistant alloys Double-sided chipbreaker, cylindrical hole 0.4 mm corner radius for accurate profiles Stable performance for heat-resistant alloys The DNMG150404 AH8015 combines a PVD-coated carbide grade with a 55° rhombic shape to address the demands of machining heat-resistant alloys. The PVD layer increases surface hardness and temperature resistance, which reduces flank and crater wear during higher cutting temperatures. With a 0.4 mm corner radius, the insert supports consistent surface quality without excessive cutting forces, making it suitable for general turning operations where a compromise between wear resistance and edge stability is required. This results in fewer insert changes and more predictable machining cycles. Straightforward ISO compatibility and quick system setup As an ISO turning insert, the component is dimensioned for standard holders; compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness. Key dimensions to note are a plate size of 15 and a thickness of 4.76 mm, with a relief angle of 0° and a cylindrical hole for positive clamping. The complete system comprises the ISO insert, a matching external holder or boring bar, an underlay/clamp set and replacement screws. Verifying these parameters before purchase reduces setup time and minimises the risk of incorrect mounting, supporting efficient shop-floor integration. Economical cutting and predictable edge life The double-sided chipbreaker provides controlled chip formation on both faces and increases economy by offering multiple indexed cutting edges. Combined with the PVD-coated AH8015 grade, this geometry provides stable chip control and repeatable performance when the correct chipbreaker and grade are selected for the workpiece material and machining stability. The cylindrical-hole design enhances clamping stability, which contributes to repeatable results and fewer vibration-related failures. For best results, match the chipbreaker style and grade to the material, operation type and machine rigidity to achieve the optimal balance of productivity and tool life. Contact Metav Werkzeuge for an application check or to request the Tungaloy DNMG150404 AH8015 insert — expert advice and fast handling are available via Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: 6775763 SKU: 6775763-Tungaloy Manufacturer SKU: TUN6775763 Facts Geometry: 55° included angle Shape: rhombic Size: 15 Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Hole: cylindrical hole Chipbreaker: double-sided Materials & Features Material: carbide Coating/sort: AH8015 (PVD) Application: turning; external and internal turning Series: ISO turning inserts Compatibility: ISO holder standards Manufacturer: Tungaloy FAQ What materials is this insert suitable for? The DNMG150404 AH8015 insert is specified for machining heat-resistant alloys; the AH8015 PVD-coated carbide provides a balanced combination of wear resistance and edge stability for such materials. How does the PVD coating benefit performance? The PVD coating on the AH8015 grade increases surface hardness and temperature resistance, which reduces wear and helps sustain a consistent cutting edge under elevated cutting temperatures. Is the insert compatible with standard ISO holders? Compatibility is governed by form, relief angle, tolerance class, clamping method, size (15) and thickness (4.76 mm); when these parameters match the holder, the insert fits ISO-standard toolholders. What advantage does the double-sided chipbreaker offer? A double-sided chipbreaker provides controlled chip formation on both faces and extends service life through indexed reuse of cutting edges, improving economy per edge. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6775763 and the product SKU is 6775763-Tungaloy for ordering and stock enquiries. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Benefit from a balance of PVD‑coated carbide wear resistance and stable cutting‑edge performance, combined with ISO‑standard geometry for reliable holder compatibility; order directly via Metav Werkzeuge or contact our consultants for selection advice. DNMG 150404 AH8015 indexable turning insert by Tungaloy — PVD‑coated carbide, rhombic 55° The DNMG150404 AH8015 is an ISO‑standard rhombic turning insert designed for general turning of heat‑resistant alloys and similar demanding materials. ISO DNMG 55° rhombic geometry PVD‑coated carbide AH8015 for alloys Double‑sided chipbreaker for versatile turning Cylindrical locating hole and 0° relief angle Optimised grade for heat‑resistant alloys and balanced wear The AH8015 grade is a PVD‑coated carbide developed as a first choice for the general machining of heat‑resistant alloys. The coating enhances surface hardness and reduces adhesive wear while the substrate provides edge stability; this combination results in predictable tool life under varied cutting conditions. For production environments where material mix and moderate cutting parameters are common, the beneficial trade‑off between wear resistance and cutting‑edge robustness supports consistent component quality and reduced tool change frequency. Geometry and tolerances that ensure secure clamping and repeatable results The insert follows the ISO DNMG150404 designation and features a 55° rhombic geometry, a 0.4 mm corner radius and a 4.76 mm thickness, together with a cylindrical locating hole. These measurable attributes ensure compatibility with standard holders when form, relief angle, tolerance class, fastening method, size and thickness are matched. A correctly matched insert and holder combination reduces vibration and run‑out, improving surface finish and extending insert life; specifying the ISO code and physical dimensions at ordering avoids mismatches and downtime. Efficient turning performance and cost‑effective use The double‑sided chipbreaker and reversible design make this indexable insert an economical option for both external and internal turning applications. Using both cutting edges maximises material yield per insert and reduces tool inventory. When the grade and chipbreaker are selected according to workpiece material and machine rigidity, the result is stable chip control, fewer interruptions for tool changes and a measurable improvement in throughput. In practice, this leads to more predictable cycles and lower unit costs across typical batch sizes. Practical mounting guidance and application recommendations As an ISO‑type indexable insert, correct mounting and torque settings are essential: ensure the holder accepts DNMG geometry, confirm the 0° relief angle matches the toolholder seat and use the specified clamping screws. Inspect seats for cleanliness and light burrs before assembly to preserve the repeatability of clamping. For less experienced teams, choosing the appropriate chipbreaker and grade for the workpiece—especially with heat‑resistant alloys—will reduce trial‑and‑error and safeguard surface quality. For tailored advice on holder compatibility or process parameters, Metav Werkzeuge consultants are available to assist. Contact Metav Werkzeuge for application advice on this Tungaloy turning insert and to verify holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947112 Manufacturer SKU: TUN6947112 SKU: 6947112-Tungaloy Model series: ISO‑Drehwendeschneidplatten Application: Turning Core dimensions ISO code: 150404 Designation: DNMG150404 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 55° Relief angle: 0° Hole: with cylindrical locating hole Materials & special features Carbide (Hartmetall) substrate PVD coating, grade AH8015 Double‑sided chipbreaker Rhombic plate form ISO‑standard indexable insert for turning Suitable for external and internal turning FAQ What materials is this insert designed for? The DNMG150404 AH8015 insert by Tungaloy is designed primarily for heat‑resistant alloys; the PVD‑coated carbide AH8015 offers a balanced combination of wear resistance and edge stability suited to such materials. Will this insert fit my existing DNMG holder? Compatibility depends on holder form, relief angle, tolerance class, fastening and seat dimensions; the DNMG150404 designation and the listed thickness of 4.76 mm should be checked against the holder specifications. How does the double‑sided chipbreaker affect tool life? The double‑sided chipbreaker allows both edges to be used, effectively doubling the available cutting edges per insert and improving cost efficiency while maintaining consistent chip control. Is the locating hole important for setup? Yes, the cylindrical locating hole and correct seat geometry ensure repeatable clamping and minimal run‑out, which benefits surface finish and insert life. What support is available for selecting the correct chipbreaker and grade? Metav Werkzeuge can advise on selecting the appropriate chipbreaker and the AH8015 grade for the specific workpiece material and machining conditions to optimise performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced wear resistance and edge stability of the PVD‑coated carbide grade AH8015 together with the versatile 55° rhombic geometry and fine 0.4 mm corner radius for consistent surface quality and longer tool life; order directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150404 AH8015 — ISO rhombic turning insert, Tungaloy, PVD‑coated carbide DNMG150404 AH8015 is an ISO rhombic insert engineered for general turning of heat‑resistant alloys and similar demanding materials. PVD‑coated carbide grade AH8015 55° rhombic geometry for versatile turning 0.4 mm corner radius for fine surface finish Double-sided chipbreaker for reliable chip control Cylindrical centre hole for secure clamping Consistent performance on heat‑resistant alloys The PVD‑coated carbide grade AH8015 combines wear resistance with edge stability to extend cutting life when machining heat‑resistant alloys. This balancing act reduces the need for frequent index changes and maintains dimensional accuracy over longer runs. The coating helps limit built‑up edge and increases resistance to thermal load, which translates into fewer interruptions and more predictable productivity in continuous or batch turning operations. Easy integration into ISO holder systems The ISO rhombic designation and standardised geometry mean the insert fits common ISO holders when the holder's form, clearance, tolerance class, fastening method, size and thickness are matched. The 55° cutting angle and 0° clearance enable versatile approach angles for both external and internal turning tasks. The cylindrical centre hole and standard fastening ensure secure clamping and repeatable seating, reducing the risk of vibration and chatter for a stable process. Improved surface finish and controlled chips A 0.4 mm corner radius delivers a fine surface finish and helps avoid edge chipping in finishing passes, while the double-sided chipbreaker offers consistent chip formation across both indexable edges. For operations that prioritise surface integrity over heavy stock removal, the combination of a small radius and PVD coating minimises surface defects and built‑up edge, resulting in better component appearance and reduced rework. Practical guidance for turning applications Designed for external and internal turning, the insert is best used with a matching chipbreaker and grade chosen according to material, cutting conditions and machine rigidity. In practice, select the AH8015 grade when facing heat‑resistant or tougher alloy work; choose a larger radius or different chipbreaker when higher feed or roughing is required. For tailored recommendations on feeds, speeds and holder selection, technical consultation is available to ensure the cutting solution delivers measurable productivity and repeatable quality. For Tungaloy quality and AH8015 performance, contact Metav Werkzeuge for tailored application advice and prompt supply — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Designation: DNMG150404 AH8015 Tungaloy insert Manufacturer article number: 6947254 Manufacturer SKU: TUN6947254 SKU: 6947254-Tungaloy Model series: ISO turning inserts Material: carbide Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Clearance angle: 0° Special features ISO designation DNMG150404 PVD‑coated carbide grade AH8015 Double‑sided chipbreaker Cylindrical centre hole Rhombic plate form Intended for turning of heat‑resistant alloys Compatible with ISO holder systems FAQ What materials is this insert suitable for? The DNMG150404 AH8015 Tungaloy insert is intended primarily for heat‑resistant alloys and offers a balanced combination of wear resistance and edge stability for general‑purpose machining. How is the insert secured in the holder? The insert features a cylindrical centre hole and standard ISO seat geometry; secure clamping is achieved using the corresponding ISO holder, ensuring repeatable seating and stable cutting. What surface quality can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius produces a fine surface finish in finishing passes while maintaining edge strength; for heavier stock removal a larger radius or a different chipbreaker may be preferable. How many indexable edges does the insert provide? The rhombic DNMG insert is double‑sided with a chipbreaker on each usable edge, allowing for multiple indexing cycles before replacement. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Take advantage of the ISO‑compliant geometry and the balanced AH8015 PVD‑coating for dependable machining of temperature‑resistant alloys; the double‑sided, hole‑type design with a 0.4 mm nose radius reduces tooling costs and ensures secure clamping. Order genuine Tungaloy inserts directly via Metav Werkzeuge or ask the consultants for application support. DNMG150404 AH8015 ISO turning insert for Turning — PVD‑coated carbide (Tungaloy) The DNMG150404 AH8015 is an ISO‑standard indexable turning insert engineered for general turning operations, offering a balanced PVD‑coated carbide grade for consistent performance on heat‑resistant alloys. DNMG150404 ISO geometry, 55° rhombic PVD-coated carbide grade AH8015 Double-sided insert with cylindrical hole 0.4 mm nose radius for fine finishing Predictable set‑up with ISO geometry for reduced downtime The ISO DNMG150404 rhombic geometry (55°) provides a standardised seating and engagement angle that simplifies tool‑holder selection and setup. Because compatibility with a holder depends on form, clearance angle, tolerance class, fastening and thickness, the ISO design enables predictable clamping and repeatable positioning. This consistency lowers setup time and contributes to uninterrupted production cycles while maintaining a stable cutting orientation for turning and facing tasks. Balanced PVD‑coated carbide for stability in demanding alloys The AH8015 grade combines PVD coating with a robust carbide substrate to balance wear resistance and cutting edge stability. That makes the insert well suited to machining heat‑resistant alloys where temperature and adhesion can challenge uncoated grades. The coating reduces built‑up edge and improves surface finish, while the substrate supports a sharp, durable edge — a practical compromise between life expectancy and reliable machining performance in general turning applications. Economical double‑sided design and secure clamping The double‑sided indexable design increases the number of usable cutting edges per insert, improving cost efficiency in production environments. The presence of a cylindrical hole ensures positive, repeatable clamping in compatible ISO holders and reduces the risk of slip under intermittent or interrupted cuts. With a 0° clearance angle and a plate thickness of 4.76 mm, the insert delivers a robust support area that helps maintain edge integrity under moderate to elevated cutting forces. Practical guidance on chipbreakers and holder selection Selecting the correct chipbreaker and matching the insert to a rigid, ISO‑compatible holder are decisive for achieving the stated benefits. The double‑sided chipbreaker configuration suits a range of machining conditions; choosing the appropriate chipformer and the right level of rigidity in the tool assembly leads to improved chip control and surface quality. For applications with limited stability, favour a holder and clamping arrangement that maximises support and minimises overhang to protect the cutting edge and extend tool life. Speak to Metav Werkzeuge for tailored application advice and to secure genuine Tungaloy DNMG150404 AH8015 turning inserts; contact info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical support and supply. Technical data Article number: 6947069 Manufacturer SKU: TUN6947069 SKU: 6947069-Tungaloy Designation: DNMG150404 AH8015 Numbers / Core technical data Geometry angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Nose radius: 0.4 mm Designs / Special features PVD‑coated carbide grade AH8015 Double-sided indexable insert Rhombic plate form Cylindrical hole for axial clamping ISO‑compliant turning insert Intended application: Turning Model series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The DNMG150404 AH8015 insert from Tungaloy is optimised for the general machining of heat‑resistant alloys, offering a balance of wear resistance and edge stability for such materials. How does the double‑sided design affect cost efficiency? A double‑sided insert provides multiple usable cutting edges, improving cost per cutting edge and making the Tungaloy DNMG150404 AH8015 insert economically favourable for production environments. Is the insert compatible with standard ISO holders? The ISO geometry DNMG150404 is intended for ISO‑compliant holders; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness, so match these parameters with the chosen tool holder. What advantage does the PVD coating provide? The PVD coating on the AH8015 grade enhances surface hardness and adhesion resistance, reducing built‑up edge and contributing to improved surface finish and longer cutting performance under elevated temperatures. Can this insert be used for finishing operations? Yes, the 0.4 mm nose radius and the insert’s balanced grade make it suitable for fine finishing passes where a controlled edge and good surface quality are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 carbide and a 55° rhombic geometry for reliable turning in heat‑resistant alloys; the ISO compatibility and double‑sided chipbreaker ensure consistent cycle times and reduced regrinds. Order the insert directly via Metav Werkzeuge or consult the technical team for tailored application advice. DNMG150404 AH8015 ISO turning insert, PVD‑coated carbide, Tungaloy A DNMG150404 AH8015 indexable insert designed for ISO‑standard external and internal turning of heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability PVD‑coated carbide grade AH8015 For machining heat‑resistant alloys Rhombic 55° geometry for stable cuts Double‑sided chipbreaker for consistent chips Longer tool life through balanced material design The AH8015 grade combines PVD coating with a wear‑resistant carbide substrate to offer a pragmatic balance between abrasive resistance and edge support. This balance reduces flank wear and crater formation under intermittent heat loads, which translates into longer in‑service intervals and fewer insert changes. For production environments handling difficult alloys, the result is measurable improvements in tool life and process stability. Secure seating and predictable mounting for ISO holders Compatibility with ISO toolholders is determined by form, clearance angle 0°, tolerance class, attachment, size and thickness. The rhombic 55° geometry and the specified 4.76 mm plate thickness provide a predictable seating surface and stable clamping. As a consequence, set‑up reproducibility improves and vibration susceptibility is reduced, supporting repeatable surface finish and dimensional accuracy on turned components. Improved chip control reduces interruptions A double‑sided chipbreaker optimises chip formation for a wide range of cutting conditions typical in turning operations. The chip control design helps to avoid long stringy chips and supports safer material evacuation, which lowers the risk of tool collisions and machine stoppages. With two usable edges per side, the insert maximises cost efficiency while maintaining consistent chip shape across varying feeds and depths of cut. Easy system integration and pragmatic stock management The insert integrates into a standard ISO turning system comprising the indexable plate, a matching external holder or boring bar, a shim/clamp set and replacement screws. The presence of a cylindrical locating hole simplifies positive location and clamping, while the 0.4 mm corner radius allows a compromise between edge strength and profile definition. For production planners, this means straightforward inventory control and reduced tooling complexity on mixed‑material production lines. For application support or to order DNMG150404 AH8015 inserts from Tungaloy, contact Metav Werkzeuge via e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical guidance and supply options Technical data Article number: 6936086 Manufacturer SKU: TUN6936086 Supplier SKU: 6936086-Tungaloy Brand: Tungaloy Facts Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Insert geometry: 55° rhombic Clearance angle: 0° Special features Carbide substrate with PVD coating AH8015 ISO indexable turning insert series Double‑sided chipbreaker Cylindrical locating hole Rhombic plate form, with hole FAQ What materials is this insert suited for? The DNMG150404 AH8015 insert is intended for general machining of heat‑resistant alloys, where the PVD coating and carbide substrate provide a balance of wear resistance and edge stability. Will the insert fit my ISO turning holder? Compatibility depends on holder form, clearance, tolerance class, attachment and size; the DNMG150404 is ISO‑standardised and designed for secure seating in matching ISO external holders and boring bars. How does the AH8015 grade affect tool life? AH8015 offers a good compromise between wear resistance and edge support, reducing frequent flank wear in challenging materials and thus extending useful cutting life. How many cutting edges are available per insert? The rhombic DNMG150404 has two usable edges per side with a double‑sided chipbreaker, increasing the number of indexable edges and improving cost‑efficiency. What does the 55° geometry mean for turning applications? A 55° rhombic geometry provides a stable cutting direction and versatility for both external and internal turning, aiding in achieving consistent surface finishes and dimensional control. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH8015, reliable cutting-edge stability and ISO compatibility for consistent turning results. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored tooling recommendations. DNMG150404 AH8015 indexable insert for turning – PVD-coated carbide, 0.4 mm radius | Tungaloy The DNMG150404 AH8015 is a rhombic ISO indexable insert engineered for external and internal turning of heat-resistant alloys and general machining applications. PVD-coated carbide AH8015 Rhombic 55° cutting geometry Double-sided chipbreaker with cylindrical hole Consistent edge life for demanding materials The PVD-coated carbide composition and the AH8015 grade deliver a balanced combination of wear resistance and cutting-edge stability, making this insert a reliable choice where temperature and material aggressiveness matter. As an ISO-compliant rhombic insert, the geometry ensures repeatable engagement with the workpiece while the 55° approach angle supports versatile turning operations. The design reduces unplanned downtime by providing predictable wear patterns, which in turn simplifies tool change intervals and stock management. Practical advantages on the shop floor A defined corner radius 0.4 mm and 4.76 mm thickness create mechanical robustness for moderate to heavy feed conditions, while the rhombic shape enables both external and internal turning cycles. The double-sided chipbreaker increases usable cutting edges per insert, improving material utilisation and lowering tooling costs. The insert’s cylindrical hole and standard ISO dimensions allow straightforward mounting in compatible holders; compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness, which supports flexible integration into existing tool systems. Selection guidance and machining scope Choose the chipbreaker and grade to match workpiece material, machining type and machine stability; the grade AH8015 is the first choice for general machining of heat-resistant alloys, offering an effective compromise between abrasion resistance and edge strength. The DNMG150404 indexable insert is supplied as part of the ISO turning plate family and fits holders designed for this ISO designation. For users transitioning from other grades, the PVD layer enhances surface finish and edge life compared with uncoated carbide in many intermittent and continuous turning tasks. For availability, technical advice or to discuss tool selection for Tungaloy indexable inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947229 Manufacturer SKU: TUN6947229 SKU: 6947229-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Corner radius: 0.4 mm Thickness: 4.76 mm Plate size: 15 mm Cutting angle: 55° Free angle: 0° ISO designation: 150404 Special features Grade/coating: AH8015, PVD-coated Plate form: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: turning Compatibility: ISO-compatible insert for holders determined by form, clearance angle, tolerance class, clamping, size and thickness Typical use: general machining of heat-resistant alloys FAQ Is this insert compatible with my existing holder? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the DNMG150404 AH8015 indexable insert (TUN6947229) fits holders rated for the DNMG 150404 ISO family when those parameters match. Which materials suit the AH8015 grade best? The AH8015 grade is intended as a first choice for the general machining of heat-resistant alloys, balancing wear resistance with edge stability for improved tool life under elevated temperatures. How does the double-sided chipbreaker affect tool economy? A double-sided chipbreaker provides usable cutting edges on both sides of the insert, effectively doubling the number of indexing events per insert and reducing tooling costs while maintaining consistent chip control. What should be considered when selecting the corner radius and geometry? Select corner radius 0.4 mm and the rhombic 55° geometry based on part tolerance, surface finish requirements and machine stability; smaller radii give finer finishes while larger radii can increase strength under heavy cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of balanced wear resistance and stable cutting edges provided by the AH8015 PVD-coated carbide grade and the accurate 55° rhombic geometry with a 0.4 mm corner radius for consistent turning performance. Order the DNMG150404 insert directly via Metav Werkzeuge or ask our consultants for compatibility advice. DNMG150404 AH8015 indexable turning insert — PVD-coated carbide, 55° rhombic (Tungaloy) A DNMG150404 AH8015 indexable turning insert engineered for ISO-standard turning applications, optimised for general machining of heat-resistant alloys with reversible cutting edges PVD-coated carbide grade AH8015 Rhombic plate, 55° cutting angle Double-sided chipbreaker, reversible Cylindrical hole, compatible with ISO holders Consistent cutting performance for demanding turning operations The insert delivers a reliable balance of wear resistance and edge stability thanks to the PVD-coated AH8015 carbide. The rhombic 55° geometry and 0.4 mm corner radius support stable chip formation during external and internal turning, reducing vibrations and improving dimensional consistency. This balance makes the insert suitable for batch production and mixed-lot machining where predictable tool life and repeatable results matter. Efficient, reversible design that reduces tooling costs A double-sided configuration with a cylindrical mounting hole provides four usable cutting edges per insert, enabling efficient indexability and straightforward replacement. The reversible chipbreaker design improves chip control across a range of feeds and depths of cut, meaning fewer insert changes and less machine downtime. The combination of geometry and coating contributes to a competitive cost-per-part in medium- to high-volume turning tasks. Practical compatibility and system considerations for integration Dimension and mounting standards follow ISO conventions, so the insert integrates with standard external holders and boring bars when form, clearance angle, tolerance class, clamping method, size and thickness are matched. The plate thickness of 4.76 mm and 15 mm size are typical for robust clamping; the cylindrical hole ensures consistent assembly and torque transmission. Where holder compatibility is uncertain, refer to the tolerance and mounting specifications to select the correct seat and clamping set. Material focus and recommended applications Designed as a first-choice grade for machining heat-resistant alloys, the insert performs well where a compromise between wear protection and cutting-edge robustness is required. The PVD coating enhances thermal and adhesive wear resistance, while the solid carbide substrate maintains a stable cutting edge under intermittent and continuous cuts. Typical uses include general turning of high-temperature alloys and tougher stainless or alloyed steels where controlled chip formation and consistent surface finish are priorities. For technical purchase guidance or to secure the DNMG150404 AH8015 inserts from Tungaloy, contact Metav Werkzeuge for tailored advice and fast delivery options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6741652 Manufacturer SKU: TUN6741652 Our SKU: 6741652-Tungaloy Model series: ISO indexable turning inserts Core specifications Plate size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 0° Features and applications Material: carbide Coating / grade: AH8015 (PVD) Double-sided chipbreaker Rhombic plate form Cylindrical hole Suitable for turning Intended for heat-resistant alloys System components: compatible outer holder, shank, clamping set and replacement screws FAQ What materials is this insert suitable for? The DNMG150404 AH8015 insert is intended primarily for heat-resistant alloys and also performs well on alloyed steels where a balance of wear resistance and edge stability is required. Is the insert reversible and how many cutting edges are available? This indexable insert is double-sided and reversible, providing multiple cutting edges per insert to reduce tool-change frequency and lower tooling costs. Which holders are compatible with this ISO designation? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; the DNMG150404 fits standard ISO holders designed for 15 mm rhombic plates with a cylindrical hole. What benefits does the AH8015 PVD coating deliver? The AH8015 PVD coating increases thermal and adhesive wear resistance while preserving cutting-edge robustness, improving tool life and surface finish in demanding turning operations. How does the 55° geometry affect machining performance? The 55° rhombic geometry offers good versatility for both external and internal turning, balancing strength and accessibility while promoting stable chip formation with the 0.4 mm corner radius. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Combine cost-effectiveness with reliable wear resistance and stable cutting-edge performance for uninterrupted turning operations. Order the insert directly via Metav Werkzeuge or request application advice from our consultants to ensure seamless integration into existing toolholders. DNMG150404 AH8015 DNMG 150404 turning insert — Tungaloy DNMG150404 AH8015 is an ISO rhombic, PVD-coated indexable insert designed for general turning of heat‑resistant alloys and similar materials PVD-coated cemented carbide substrate Balanced wear resistance and edge stability ISO rhombic DNMG form, 15 mm size Double-sided chipbreaker with cylindrical hole Consistent performance for machining heat‑resistant alloys The AH8015 grade combines a PVD coating with a cemented carbide substrate to deliver a balanced mix of wear resistance and edge stability. This balance reduces unexpected tool failures and keeps cycle times predictable, which benefits serial production and high-mix shops alike. The result is fewer tool changes, consistent component tolerances and improved process economy when machining heat‑resistant alloys. ISO compatibility and straightforward clamping Designed to the ISO series, the rhombic DNMG form ensures compatibility with a wide range of standard external holders and boring bars. Critical dimensions such as the 15 mm insert size, 4.76 mm thickness and specified tolerance class determine correct seating and clamping. The 0° relief angle and standard mounting hole make setup repeatable, so holders that conform to ISO standards accept the insert without modification—reducing setup time and minimizing fixture errors. Controlled chips and dependable surface results The double-sided chipbreaker together with the rhombic geometry promotes predictable chip formation and evacuation. A corner radius of 0.4 mm and the insert’s 55° geometry contribute to a stable cutting action that enhances surface finish and reduces vibration. Clear chip control reduces interruptions for chip clearing and helps maintain tool life while improving the consistency of finished parts. Efficient choice for general turning and productivity As a first‑choice grade for general machining of heat‑resistant alloys, AH8015 offers an economical compromise between long life and robust edge behaviour. The PVD layer improves resistance to abrasive and adhesive wear, supporting productive machining with fewer interruptions. For operations that require a pragmatic balance of cost, performance and availability, this insert provides a practical solution that integrates easily into current production workflows. Discuss application requirements with Metav Werkzeuge for this Tungaloy DNMG150404 AH8015 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6793728 Manufacturer SKU: TUN6793728 SKU: 6793728-Tungaloy Designation: DNMG150404 AH8015 Application: Turning Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Geometry angle: 55° Special features Material: cemented carbide Coating: PVD Shape: rhombic (DNMG) Hole style: cylindrical hole Chipbreaker: double-sided Grade: AH8015 Typical use: turning of heat‑resistant alloys FAQ Is this insert suitable for machining heat‑resistant alloys? The DNMG150404 AH8015 Tungaloy indexable insert (SKU 6793728-Tungaloy) is specifically graded for the general machining of heat‑resistant alloys and offers a balanced combination of wear resistance and edge stability. Can the DNMG150404 AH8015 be used in standard ISO holders? Yes. The insert follows ISO dimensions for DNMG inserts, so compatibility with ISO‑conforming external holders and boring bars is ensured provided form, size and clamping method match. What does the AH8015 grade deliver compared with other grades? AH8015 is a PVD‑coated cemented carbide grade optimised for broad material coverage in heat‑resistant alloys, offering a pragmatic compromise between wear resistance and cutting‑edge stability, which supports longer, more predictable tool life. How does the chipbreaker design affect machining? The double‑sided chipbreaker on this DNMG insert promotes predictable chip formation and evacuation, improving surface finish and reducing interruptions for chip clearing during turning operations. Which dimensions should be checked before ordering inserts? Confirm the insert size (15 mm), thickness (4.76 mm), hole style (cylindrical) and corner radius (0.4 mm) to ensure correct seating and clamping; the DNMG150404 AH8015 Tungaloy insert is manufactured to these specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade that balances wear resistance and edge stability, the ISO rhombic geometry for consistent chip formation, and a compact 0.4 mm nose radius for fine surface finish; order the insert directly via Metav Werkzeuge or consult their team for application-specific advice. DNMG150404 AH8015 — Indexable turning insert (rhombic, 55°) by Tungaloy The DNMG150404 AH8015 is an ISO rhombic, double-sided indexable insert designed for general turning, offering a balanced solution for machining heat-resistant alloys. PVD-coated carbide for heat-resistant alloys ISO DNMG 150404 rhombic geometry Double-sided insert with cylindrical hole 0.4 mm nose radius for fine detail Longer tool life through balanced grade and coating The combination of a PVD-coated surface with a carbide substrate in grade AH8015 provides a measured balance between wear resistance and edge strength. This balance is particularly advantageous when machining demanding materials: the coating reduces adhesion and thermal wear, while the substrate maintains a stable cutting edge. As a result, the indexable insert achieves consistent performance in intermittent and continuous cutting, contributing to lower tooling costs per part and predictable process behaviour. Reliable mounting and ISO compatibility for fewer setup issues Adherence to ISO geometry ensures interchangeability across standard toolholders; compatibility depends on matching form, clearance (0° relief), tolerance class, fastening and thickness. The rhombic shape at 55° with a cylindrical hole and double-sided layout enables secure clamping and the economical use of both cutting edges. The insert’s 4.76 mm thickness and inscribed size (15) suit conventional external and internal turning holders, while the chipbreaker geometry supports stable chip control when the correct grade and breaker are selected for the workpiece and machine stability. Precision finish and process reliability for critical components With a 0.4 mm nose radius, this insert is geared towards delivering finer surface quality where form and finish matter. Choosing the correct chipbreaker and matching the AH8015 grade to the workpiece material reduces flank wear and edge chipping, improving repeatability in batch production. The ISO standard designation also simplifies tool management and reordering within production systems, supporting process security and shorter downtime between regrinds or replacements. For tailored advice on Tungaloy turning inserts and fast supply, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — for ordering and application support. Technical Data Article number: 6760648 Manufacturer SKU: TUN6760648 SKU: 6760648-Tungaloy Designation: DNMG150404 AH8015 Model series: ISO turning indexable inserts Core data Inscribed size: 15 Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Main angle: 55° Mounting: cylindrical hole Double-sided: yes Features & materials Material: carbide Coating: PVD Geometry: rhombic, cylindrical hole Chipbreaker: double-sided Application: turning Compatibility determined by form, clearance, tolerance, fastening, size, thickness FAQ What materials is this insert primarily suited for? This insert is primarily intended for machining heat-resistant alloys; the AH8015 grade is selected for a balanced performance between wear resistance and edge stability. How can compatibility with existing toolholders be verified? Compatibility is assured by the ISO designation and by matching the insert form, clearance (0° relief), tolerance class, fastening type, size and thickness to the toolholder specification. What are the key geometry specifications to note? Key dimensions: inscribed size 15, thickness 4.76 mm, corner radius 0.4 mm, rhombic shape with a 55° main angle and a cylindrical mounting hole. Is the insert reversible or indexable? Yes — the insert is double-sided, allowing indexing to the unused cutting edges to extend tool life. Which coating and grade are used on this insert? This item uses a PVD coating on a carbide substrate in grade AH8015, chosen for general turning of heat-resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated carbide AH8015 grade and the DNMG150404 rhombic geometry with a 55° wedge angle for stable, predictable machining of heat‑resistant alloys; the double‑sided chipbreaker and cylindrical‑hole fastening ensure reliable seating and straightforward indexation. Order the insert directly via Metav Werkzeuge or ask their consultants for tailored selection support. DNMG150404 AH8015 — DNMG indexable insert for turning, Tungaloy DNMG150404 AH8015 is an ISO‑standard rhombic indexable insert designed for precise external and internal turning of heat‑resistant alloys in general machining applications PVD‑coated carbide grade AH8015 ISO DNMG 150404 rhombic form Double‑sided chipbreaker design Cylindrical hole fastening for secure seating Durable coating and balanced grade for longer tool life The PVD‑coated carbide of the AH8015 grade offers a deliberate balance between wear resistance and cutting‑edge stability, which translates into extended productivity and fewer unexpected tool changes. A PVD layer reduces abrasive and adhesive wear at the cutting edge, while the substrate carbide provides toughness under intermittent cutting. For workshops processing heat‑resistant alloys, this combination typically delivers a consistent surface finish and longer tool life, reducing overall machining costs. Geometry optimised for versatile turning performance The rhombic DNMG form with a 55° geometry and a 0.4 mm corner radius provides a compromise between strength and cutting action: the acute approach angle aids in finishing and light‑turning operations, while the moderate corner radius supports controlled edge strength for semi‑roughing. As an ISO‑standard insert, the form and dimensions are compatible with a wide range of holders, but correct matching requires attention to holder form, clearance, tolerance class, fastening method, size and thickness to ensure stable cutting conditions. System compatibility and practical handling benefits This indexable plate is supplied with a cylindrical hole for screw fastening and a double‑sided chipbreaker, allowing re‑indexing to present a fresh edge without replacing the insert. The plate measures an inscribed circle of 15 mm with a 4.76 mm thickness, which contributes to clamping stability in the seat and reduces vibration tendency. System setup should include a matching outer holder or boring bar, a suitable clamp set and correct replacement screws to maintain repeatable positioning and process reliability. Productivity advantages and recommended applications Selected as a first choice for general machining of heat‑resistant alloys, the AH8015 grade supports productive cutting by offering consistent wear behaviour and dependable edge performance. The combination of geometry and coating reduces downtime associated with frequent insert changes and simplifies tool‑life planning, contributing to faster set‑ups and predictable parts quality. For advice on selecting the correct chipbreaker or holder combination for a specific component, Metav Werkzeuge provides practical guidance and application support. Contact Metav Werkzeuge for personalised advice on Tungaloy DNMG150404 AH8015 inserts at info@metav-werkzeuge.com or call +49 2822 7131930 for process‑specific recommendations Technical Data Article number: 6947172 SKU: 6947172-Tungaloy Manufacturer SKU: TUN6947172 Brand: Tungaloy Material: carbide Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle: 15 mm Wedge angle: 55° Rake angle: 0° Special features PVD‑coated carbide grade AH8015 Double‑sided chipbreaker Rhombic plate form DNMG Cylindrical hole fastening ISO indexable turning insert Suitable for turning heat‑resistant alloys System components: compatible holder, clamp set and replacement screws FAQ What materials is this insert best suited for? The DNMG150404 AH8015 insert is optimised for heat‑resistant alloys; the AH8015 PVD‑coated carbide provides a balance between wear resistance and cutting‑edge stability for general turning tasks. How is compatibility with tool holders ensured? Compatibility depends on form, clearance, tolerance class, fastening method, size and thickness; the ISO‑standard DNMG150404 geometries permit interchangeability with holders designed to accept DNMG inserts. Can this geometry be used for both external and internal turning? Yes; the rhombic shape with a 55° approach angle and the 0° rake make the insert suitable for external and internal turning when paired with an appropriate holder or boring bar. How is the insert clamped in the tool? The plate features a cylindrical hole for screw fastening; use the matching clamp set and replacement screws as part of the system arrangement to achieve secure seating and repeatable positioning. What are the practical benefits of the AH8015 grade from Tungaloy? The AH8015 grade combines a PVD coating with a tough carbide substrate to provide stable cutting performance, good wear resistance and reliable edge life for productive machining of demanding alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8015 carbide grade and the ISO-standard DNMG150404 geometry for consistent turning of heat-resistant alloys; the combination of a 55° rhombic form, 0° clearance and a 0.4 mm corner radius delivers a balanced mix of edge stability and wear resistance. Order directly via Metav Werkzeuge or consult the technical team for holder compatibility and process optimisation. DNMG 150404 AH8015 Tungaloy turning insert — ISO rhombic 55° DNMG150404 AH8015 Tungaloy-Wendeplatte is an ISO-standard indexable insert for general turning, designed for external and internal operations on heat-resistant alloys and a broad range of materials PVD-coated carbide grade AH8015 ISO rhombic 55° geometry Double-sided chipbreaker for chip control Greater tool life through balanced PVD-coated carbide The PVD-coated AH8015 grade combines carbide substrate strength with a thin, hard PVD coating to extend cutting edge life when machining heat-resistant alloys. This configuration is selected for its balance between wear resistance and edge stability, so fewer index changes are needed and process interruptions are reduced. The coating reduces adhesive wear at elevated temperatures, while the substrate maintains toughness during intermittent cuts, delivering a cost-effective solution for routine and continuous turning tasks. Straightforward integration into ISO tooling systems The insert follows the ISO standard form, so compatibility with holders depends on shape, 0° clearance, tolerance class, clamping and thickness. The rhombic 55° geometry offers versatility for both facing and turning, and the cylindrical hole ensures secure mounting with conventional clamp systems. When selecting a matching holder, check form, tolerance and mounting screw/seat to guarantee repeatable positioning and safe chip evacuation. Clear identification of these parameters supports predictable set-up times and reduced downtime. Stable machining and predictable surface results A corner radius 0.4 mm provides a compromise between strength and surface finish: it helps to dampen edge chipping while enabling good finish in finishing and light roughing passes. The 4.76 mm plate thickness increases rigidity in the pocket and helps maintain consistent cutting conditions under moderate cutting forces. The double-sided chipbreaker improves chip control across a range of feeds, aiding both productivity and shop-floor safety by preventing tangled or long chips during turning operations. Simple cost management and operational benefits Being double-sided and ISO interchangeable, this indexable insert offers two usable edges per face, reducing unit cost per edge and simplifying inventory management. The geometry and coating make it suitable as a first-choice insert for general turning of heat-resistant materials, where reliable tool life and repeatable performance matter most. Clear labelling and ISO conformity also aid traceability and reordering within a production environment. Contact Metav Werkzeuge for application-specific recommendations on the Tungaloy DNMG150404 AH8015 insert or request a tailored tooling suggestion via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6950966 SKU: 6950966-Tungaloy Manufacturer SKU: TUN6950966 Model series: ISO-Drehwendeschneidplatten Facts Geometry: DNMG150404 (ISO 150404) Angle: 55° Clearance angle: 0° Inscribed circle / size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Special features Material: Carbide Coating: PVD AH8015 Cutting material type: PVD-coated carbide Plate form: Rhombic Chipbreaker: Double-sided Hole: With cylindrical hole Application: Turning (external and internal) FAQ What materials is this insert suitable for? The DNMG150404 AH8015 Tungaloy insert is designed primarily for heat-resistant alloys and provides balanced wear resistance and edge stability for a range of steels and alloyed materials. How is the insert mounted in a holder? Mounting requires a compatible ISO turning holder that matches the DNMG form, 0° clearance and plate thickness; the cylindrical hole is secured with the appropriate clamp and screw for repeatable positioning. How many usable edges does the insert provide? The insert is double-sided and indexable; by rotating and indexing the plate, multiple cutting edges are available, which lowers cost per edge and simplifies inventory. Does the PVD coating improve performance at high temperatures? Yes, the PVD coating on the AH8015 grade improves resistance to adhesive and thermal wear, helping to maintain tool life during elevated-temperature cutting typical of heat-resistant alloys. Which features influence compatibility with existing tool systems? Compatibility depends on plate form, tolerance class, free angle (clearance), size (15 mm), thickness (4.76 mm) and the hole and clamping method; verifying these parameters ensures secure fit and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide, a 0.4 mm corner radius and ISO conformity to achieve consistent turning results; order directly via Metav Werkzeuge or consult the technical team for selection and availability. DNMG150404 AH8015 rhombic indexable insert for turning, PVD‑coated carbide by Tungaloy The DNMG150404 AH8015 is an ISO‑standard rhombic indexable insert designed for external and internal turning of heat‑resistant alloys, offering a balanced mix of wear resistance and cutting‑edge stability. ISO‑standard rhombic insert DNMG format PVD‑coated carbide grade AH8015 Double‑sided chipbreaker for turning Cylindrical hole for secure clamping Reliable machining performance with measurable benefits The AH8015 grade in this PVD‑coated carbide insert delivers a predictable balance between wear resistance and edge toughness, which translates into longer cutting life under mixed cutting conditions. By combining a rhombic geometry with a 55° approach angle and a low 0.4 mm corner radius, the geometry supports stable chip control and consistent surface finish during both light and moderate cutting operations. The double‑sided chipbreaker reduces the need for frequent index changes and helps maintain productivity in batch turning. Clear guidance on compatibility and mounting Compatibility with toolholders is defined by insert form, clearance angle and tolerance class; this plate's ISO designation, rhombic profile and cylindrical hole ensure straightforward matching to standard DNMG‑compatible holders. The 4.76 mm plate thickness and the central hole style allow secure clamping with a screw and clamp assembly commonly used for indexable turning systems. For workshop planning, the system typically comprises the insert, a matched external holder or boring bar, a backing pad or clamp set and replacement screws. Material capability and grade advantages explained The AH8015 cutting grade is formulated as a first choice for machining heat‑resistant alloys, offering stable wear behaviour without sacrificing edge integrity. The PVD‑coated layer enhances thermal resistance and reduces built‑up edge tendency when turning alloys that tend to work‑harden. In practice, this means fewer interruptions for insert changes and a more consistent part quality, which supports predictable cycle times and reduced rework. For general turning tasks of tougher materials, the combination of carbide substrate and surface coating provides a cost‑efficient compromise between tool life and process stability. For technical selection based on component material and machining strategy, contact Metav Werkzeuge for availability and tailored advice—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Tungaloy AH8015 grade and compatibility with existing toolholders Technical data Article number: 6741660 Manufacturer SKU: TUN6741660 SKU: 6741660-Tungaloy Designation: DNMG150404 AH8015 ISO code: 150404 Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 55° Special features PVD‑coated carbide grade AH8015 Rhombic plate form (DNMG) Cylindrical hole for fastening Double‑sided chipbreaker ISO‑standard indexable insert Intended for external and internal turning Suited to heat‑resistant alloys; balanced wear and edge stability FAQ What materials is this insert suitable for? The DNMG150404 AH8015 insert from Tungaloy is designed primarily for machining heat‑resistant alloys and offers a balanced performance between wear resistance and edge stability for these materials. How is the insert mounted in a holder? Mounting uses the central cylindrical hole together with a compatible clamp or screw system; the insert's ISO DNMG form and 4.76 mm thickness match standard DNMG holders. Is the chip control preformed or application dependent? The insert includes a double‑sided chipbreaker incorporated into its geometry; chip control performance depends on workpiece material, cutting parameters and chosen holder stability. What does the AH8015 grade mean for tool life? AH8015 is a PVD‑coated carbide grade optimised to combine wear resistance and edge security, supporting longer cutting intervals on demanding alloys without compromising surface quality. Can the corner radius be used for finishing passes? The 0.4 mm corner radius offers a compromise between edge strength and surface finish, making it suitable for medium‑finish operations where both durability and part appearance are important. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that balances wear resistance and edge stability, combined with a double-sided design for economical index changes; ideal for stable external and internal turning of heat-resistant alloys. Order directly via Metav Werkzeuge or consult the technical team for process matching. DNMG 150404 AH8015 — Indexable turning insert, PVD-coated carbide, 55° rhombic — Tungaloy DNMG150404 AH8015 is a rhombic, ISO‑norm indexable insert designed for precise external and internal turning of heat‑resistant alloys in general machining applications PVD-coated carbide for heat-resistant alloys ISO rhombic insert with 55° cutting angle Cylindrical hole for secure mounting Double-sided chipbreaker for cost efficiency 0.4 mm corner radius for fine finishing Consistent performance through balanced grade technology The insert is manufactured from carbide with a PVD-coated surface designed to extend tool life when machining demanding materials. The selected AH8015 grade provides a deliberate compromise between wear resistance and cutting-edge stability, which reduces unexpected tool changes and supports predictable cycle times. As a result, production planners can rely on repeatable throughput while maintaining surface quality on heat‑resistant alloys. Secure compatibility and simple tool set-up Conforming to the ISO series and the rhombic form, the component fits holders that match form, clearance, tolerance class, fastening and thickness. The cylindrical hole ensures a reliable clamp and repeatable position; the insert thickness of 4.76 mm and the 55° geometry simplify selection of a compatible external holder or boring bar. Clear dimensional data shortens set‑up decisions and reduces downtime during tool changes. Productivity benefits for general turning tasks The double‑sided design with an integrated double-sided chipbreaker permits two indexed cutting edges per side, lowering cost per edge and improving process economy. The 0.4 mm corner radius supports fine finishing passes and modest depth cuts with a good balance between edge strength and surface finish. For conventional feeds and speeds, the combination of edge geometry and coating assists in managing built‑up edge and thermal loads when machining heat‑resistant alloys. Practical guidance for application and selection When selecting the insert, match the chipbreaker and the AH8015 grade to the workpiece alloy, the chosen stability of the set‑up and the intended machining strategy. In less rigid set‑ups reduce depth of cut and favour finishing parameters to protect the edge; in stable, heavy‑cut scenarios the grade’s wear characteristics help to maintain tool life. Routine visual checks of the cutting edge and adherence to recommended cutting data will preserve performance and support consistent component quality. For reliable turning with Tungaloy AH8015 inserts, contact Metav Werkzeuge for tailored application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947136 SKU: 6947136-Tungaloy Manufacturer item number: 6947136 Manufacturer SKU: TUN6947136 Core dimensions and measurable data Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° ISO designation: 150404 Designs and special features Material: carbide Coating: PVD-coated Shape: rhombic Mounting: cylindrical hole Chipbreaker: double-sided Application: turning, external and internal Suitable for: heat-resistant alloys FAQ What materials is this insert intended for? The AH8015 grade is formulated for the general machining of heat‑resistant alloys; the DNMG150404 insert offers a balance between wear resistance and edge stability for such materials. How is the insert mounted in a holder? The DNMG150404 insert uses a cylindrical hole for positive clamping and requires a matching ISO‑conforming holder that accommodates the 55° rhombic form and 4.76 mm thickness. How many cutting edges are available per insert? With a double‑sided chipbreaker and the rhombic geometry, multiple usable cutting edges are available before regrinding or disposal is required, improving cost efficiency. Which cutting angle does the insert provide? The geometry delivers a 55° cutting angle suitable for a wide range of external and internal turning tasks. Is the insert suitable for finishing operations? Yes, the 0.4 mm corner radius supports fine finishing passes and contributes to achieving consistent surface quality when used with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH905 Wendeplatten - Tungaloy
Benefit from a combination of wear resistance, a sharp cutting edge and ISO compatibility for reproducible turning results; the PVD-coated carbide grade AH905 offers process security and stable chip formation. Order the DNMG150404 AH905 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150404 AH905 indexable turning insert (55° rhombic) – Tungaloy The DNMG150404 AH905 is an ISO indexable turning insert for external and internal turning, engineered for applications that demand a sharp cutting edge and consistent process security. ISO rhombic insert, 55° cutting edge PVD-coated carbide grade AH905 0.4 mm corner radius for fine finishing Double-sided chipbreaker, with cylindrical hole Longer tool life through optimised coating and grade The combination of a PVD coating and the AH905 cemented carbide grade is designed to deliver wear- and fracture-resistant performance during turning operations. The coating reduces flank wear and improves surface finish stability, which in turn lowers tool consumption and increases time between indexings. These properties make the insert a cost-effective option for batch production and mixed-series machining where reproducible results are required. Geometry that balances precision and versatility The insert’s 55° geometry and rhombic form provide a versatile cutting angle for both light finishing and more demanding turning tasks. A 0.4 mm corner radius supports fine surface quality while the specified 0° clearance angle and a plate thickness of 4.76 mm ensure mechanical stability in the seat. The double-sided chipbreaker and the cylindrical hole facilitate secure clamping and simple indexing, so the cutting edge can be rotated to use all available edges before replacement. Smooth integration into ISO tooling systems Compatibility with holders and boring bars is ensured by standardised dimensions and tolerances: form, clearance angle, tolerance class, fixation, size and thickness determine fit. The typical system comprises an ISO indexable insert, a matching external holder or boring bar, a backing/clamping set and spare screws, all of which are widely available. This standardisation reduces set-up time and minimises stock complexity while maintaining repeatable clamping accuracy. Practical applications and selection guidance Designed primarily for turning, the insert suits both external and internal operations when a sharp cutting edge and process security are priorities. Selection of the most effective chipbreaker and grade should be based on the workpiece material and machining stability; the AH905 grade is tailored for stable chip formation and broad material coverage. If clarification is needed regarding compatibility with a specific holder or the optimal chipbreaker for a given alloy, technical data and application advice are available — contact details are provided below for further assistance. Contact Metav Werkzeuge for tailored machining advice and availability of Tungaloy DNMG150404 AH905 inserts; Metav Werkzeuge can advise on holder compatibility and delivery options. Technical data Article number: 6859354 SKU: 6859354-Tungaloy Manufacturer SKU: TUN6859354 Model series: ISO indexable turning inserts Material: cemented carbide Facts Insert designation: DNMG150404 ISO code: 150404 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 55° Special features PVD coating, grade AH905 Double-sided chipbreaker Cylindrical hole for secure clamping Rhombic plate shape Application: turning (external and internal) System components: insert, external holder or boring bar, backing/clamping set, spare screws Wear- and fracture-resistant grade for sharp cutting edge and process security FAQ What turning tasks is this insert intended for? The DNMG150404 AH905 indexable turning insert is intended for both external and internal turning where a sharp cutting edge and reliable chip control are required. Which materials can be machined with this grade? The AH905 PVD-coated cemented carbide is designed for broad material coverage and stable chip formation; selection of the specific chipbreaker should match the workpiece material and machining conditions. How does the insert secure to a holder? The insert uses a cylindrical hole and standard ISO dimensions; clamping and stability depend on matching the holder by form, clearance angle, tolerance class, fixation, size and thickness. How many cutting edges are available per insert? The DNMG150404 AH905 is double-sided with indexing on both sides, enabling multiple cutting edges to be used before replacement. Is the insert suitable for fine finishing? Yes, the 0.4 mm corner radius and PVD coating support fine surface finishes while maintaining edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of high‑precision geometry, a wear‑resistant AT9530 grade and an optimised double‑sided chipbreaker for consistent finishing performance; order directly via Metav Werkzeuge or ask the consultants for application matching. DNMG 150404 AT9530 Tungaloy – Indexable turning insert for Turning, 55° DNMG150404 AT9530 indexable insert for precision external and internal turning applications, designed for fine finishing of steel components ISO-standard rhombic insert geometry AT9530 grade for fine finishing Double-sided chipbreaker for stability Cylindrical hole for secure mounting Precision finishing that reduces rework and process variability The DNMG150404 AT9530 Tungaloy insert is engineered for fine and light machining of steel, where surface integrity and even wear behaviour are key. Its AT9530 coated cermet composition combines hardness and thermal stability to deliver improved surface finish while reducing burr formation. The ISO‑compliant rhombic shape and 55° approach angle provide a predictable cutting direction that helps to lower cutting forces and minimise tool deflection, which in turn reduces the need for rework and extends cycle‑time consistency. Geometry and clamping that ensure reliable repeatability A 0.4 mm corner radius, 4.76 mm plate thickness and a cylindrical mounting hole contribute to mechanical stability in a wide range of ISO turning holders. The double‑sided chipbreaker design allows the insert to be indexed, doubling effective tool life in appropriate applications and improving cost efficiency per edge. Compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness — this ensures secure clamping and repeatable positioning for series production. Material behaviour and process benefits explained The coated cermet grade is optimised for finishing operations on steel, emphasising uniform wear and high quality surface results rather than aggressive metal removal. Reduced built‑up edge formation and better wear distribution are notable advantages when machining alloys where surface tolerance and appearance matter. The combination of material selection and chip control translates into fewer interruptions for tool changes and more predictable tool life in finely tuned machining strategies. Practical selection guidance for shops and production lines Select the chipbreaker and grade based on material, machining type and machine stability: the double‑sided chipbreaker suits stable set‑ups and finishing passes, while the 55° geometry is favourable for maintaining dimensional control on external profiles and internal bores. For integration into an existing workflow, match the insert to the holder form and tolerance class; consult tooling tables for feed and speed recommendations to exploit the AT9530 behaviour fully. If uncertainty remains regarding process parameters or compatibility, technical advice is available to support the decision. Contact Metav Werkzeuge for tailored application advice and swift delivery; Metav Werkzeuge can verify holder compatibility and recommend cutting data — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6765004 SKU: 6765004-Tungaloy Manufacturer SKU: TUN6765004 Model series: ISO indexable turning inserts Core specifications Insert designation: DNMG150404 ISO code: 150404 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 55° Clearance angle: 0° Features / Applications Material: carbide (cermet grade) Grade/coating: AT9530 Shape: rhombic (DNMG form) Hole: cylindrical mounting hole Chipbreaker: double-sided Intended use: turning — external and internal finishing of steel Compatibility: dependent on holder form, clearance, tolerance, fastening, size and thickness FAQ What applications are best suited to this insert? The DNMG150404 AT9530 Tungaloy insert is intended primarily for fine and light finishing of steel in external and internal turning operations, where surface quality and uniform wear are priorities. Can the insert be indexed to use both cutting edges? Yes, the double‑sided chipbreaker and rhombic geometry permit indexing to a fresh edge, effectively extending usable life under suitable cutting conditions. Which material grade is used and what advantage does it offer? The insert uses the AT9530 cermet grade, which delivers improved surface finish and steady wear behaviour in finishing passes on steel. How does the 55° approach angle affect machining? A 55° approach angle reduces radial cutting forces compared with steeper angles, aiding dimensional control and reducing deflection during profiling and internal turning. Is holder compatibility standardised? Compatibility follows ISO norms: form, clearance angle, tolerance class, fastening, size and thickness determine whether an insert seats and clamps correctly in a given holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of high-surface-quality finishing, predictable wear behaviour and straightforward ISO compatibility for consistent machining results. Order the inserts directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150404 AT9530 Tungaloy indexable insert — 55° rhombic for turning, 0.4 mm radius The DNMG150404 AT9530 is an ISO rhombic indexable insert for precision external and internal turning, optimised for fine and light finishing of steel. Coated cermet grade AT9530 55° rhombic geometry for versatile turning 0.4 mm corner radius for consistent surface finish Double-sided chipbreaker for longer tool life High-precision finishing and predictable wear The coated cermet grade AT9530 is formulated for finishing and light cutting of steel, focusing on an improved surface finish and even flank wear. Cermet-based grades combine hardness and heat resistance to reduce edge rounding during long runs; as a result, the cutting edge maintains form for a stable process and predictable component quality. This behaviour reduces the need for frequent edge changes and supports higher first-pass quality in serial production. Geometry tuned for controlled cutting and superior surfaces A 55° rhombic insert with a 0.4 mm corner radius offers a balance between strength and fine-edge definition. The rhombic shape and 0° clearance create a controlled cutting geometry that is well suited to finishing passes where micro-geometry governs the final tolerance and appearance. The double-sided chipbreaker provides consistent chip control on both edges, improving stability when light interruptions or variable section thicknesses occur, and helping to guard against poor surface texture or rework. ISO compatibility for straightforward system integration Supplied as an ISO-format indexable plate, the insert fits into standard toolholders when shape, clearance angle, tolerance class, fixing method, size and thickness match the holder specification. The ISO conformity simplifies the selection of holder, clamp set and replacement screws within existing tool systems. The plate thickness of 4.76 mm and the cylindrical hole enable secure clamping and repeatable positioning, so tool changes are quick and process repeatability is supported across shifts. Benefits in production flow and application guidance Using a finishing-oriented grade such as AT9530 reduces polishing and secondary operations for components requiring tight surface specifications. The insert geometry and chip control reduce thermal and mechanical stresses on the cutting edge, which translates into steadier cycle times and fewer process interruptions. Selection of the chipbreaker and grade should be matched to material, stability and cutting parameters to fully exploit the advantages of this insert in turning applications. For application support or to procure matching holders and clamping sets, contact Metav Werkzeuge — practical advice and fast delivery keep your production running smoothly. Technical data Article number: 6724859 Manufacturer SKU: TUN6724859 Metav SKU: 6724859-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Angle: 55° Corner radius: 0.4 mm Plate size: 15 mm Plate thickness: 4.76 mm ISO designation: DNMG150404 Materials & features Grade: AT9530 (coated cermet) Insert form: rhombic Chipbreaker: double-sided Clearance angle: 0° Hole: with hole (cylindrical) Application: Turning FAQ What materials is this insert designed for? The DNMG150404 AT9530 insert from Tungaloy is intended primarily for finishing and light machining of steel, where the AT9530 grade offers an emphasis on surface quality and uniform wear. Is the DNMG150404 compatible with standard ISO holders? Yes, the DNMG150404 conforms to ISO dimensions; compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness to the chosen holder. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius provides better edge strength than very small radii while still delivering a fine machined finish, making the insert suitable for controlled finishing passes. Can the AT9530 grade be used for interrupted cuts? The coated cermet AT9530 offers good edge stability for light interruptions, and the double-sided chipbreaker helps maintain chip control, though heavier interruptions may require a different grade or geometry. What is the benefit of a double-sided chipbreaker? A double-sided chipbreaker provides two usable cutting edges with consistent chip control on each side, extending insert utilisation and improving process reliability during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AT9530 Wendeplatten - Tungaloy
Take advantage of the coated cermet AT9530 for superior surface finish and the ISO‑compliant DNMG150404 geometry for consistent wear and reliable turning results; order the insert directly via Metav Werkzeuge or consult the team for application-specific guidance. DNMG150404 AT9530 indexable turning insert for Turning — Tungaloy The DNMG150404 AT9530 is an ISO‑standard rhomboid turning insert intended for finishing and light turning operations on steel, optimised for surface quality and uniform wear. ISO rhomboid insert DNMG150404 AT9530 Coated cermet grade AT9530 for fine finishing Double-sided chipbreaker for consistent chips Cylindrical-hole design, compatible with ISO holders Precision finishing where surface quality matters The coated cermet grade delivers a balance between hardness and toughness that is especially effective in finishing applications. By combining a wear‑resistant coating with the intrinsic properties of cermet, the geometry yields a smoother contact with the workpiece, which reduces the need for secondary operations. The result is an improved surface finish and reduced rework. The insert’s rhomboid form and 0.4 mm corner radius support stable cutting behaviour during light cuts, making it well suited for parts where dimensional accuracy and appearance are priorities. Compatibility and predictable performance in ISO tool systems Compatibility with toolholders is determined by plate form, clearance angle, tolerance class, fastening and plate thickness; this insert adheres to ISO standards to ensure consistent fit. The combination of the ISO standard geometry, 4.76 mm plate thickness and the cylindrical hole provides secure clamping and repeatable positioning in matched holders or boring bars. For production environments that require interchangeability and fast tool changes, the standardised design reduces setup time and supports predictable process control. Designed for steady chip control and tool life The double‑sided chipbreaker integrated into the cutting face promotes short, manageable chips and helps maintain stable cutting forces throughout the tool life. This leads to consistent wear across the cutting edge and prolongs service intervals. In finishing passes, the chip control system assists in avoiding built‑up edge and promotes cleaner mating surfaces, which is beneficial where surface integrity is critical. Material considerations and machining guidance Formulated for finishing and light machining of steel, the coated cermet grade performs best at moderate depths of cut and with cutting parameters tuned for surface quality rather than high metal removal rates. The 0° clearance angle and the plate’s geometry favour low cutting forces in fine passes; selecting the appropriate feed and speed will leverage the grade’s properties to produce repeatable results. When switching from tougher grades or different substrates, use the ISO compatibility and the insert’s specifications to match a holder and cutting data that preserve edge life and part finish. For precision finishing with Tungaloy’s AT9530 coated cermet and the DNMG150404 geometry, contact Metav Werkzeuge for tailored application advice and stock availability: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6765008 SKU (manufacturer): TUN6765008 SKU (shop): 6765008-Tungaloy Label: DNMG150404 AT9530 Tungaloy‑Wendeplatte Numbers / Core technical data Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Designs / Special features Coated cermet grade AT9530 Carbide body Rhomboid plate shape (DNMG150404) Double-sided chipbreaker Cylindrical hole (with hole) ISO standard turning insert, compatible with ISO holders FAQ What materials is this insert suitable for? The DNMG150404 AT9530 insert is intended primarily for finishing and light machining of steel; the coated cermet composition focuses on surface quality and even wear when machining steel. Can the insert be clamped in standard ISO holders? Yes, the DNMG150404 is an ISO‑standard rhomboid insert and is designed for compatibility with holders that match the plate form, thickness and fastening specifications. What does the double‑sided chipbreaker provide? The integrated double‑sided chipbreaker on the DNMG150404 AT9530 promotes short, controlled chips and helps maintain stable cutting forces, contributing to consistent wear and improved surface finish. Is the corner radius suitable for finishing operations? With a 0.4 mm corner radius, the insert balances edge strength and the ability to produce fine surface finishes, making it suitable for many finishing passes in turning. How does the AT9530 grade affect tool life and finish? The AT9530 coated cermet grade is formulated to offer wear resistance and stability for light turning, which supports longer edge life under finishing conditions and a more consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a fine coated cermet grade for superior surface finish and ISO DNMG geometry for reliable holder compatibility; order the insert directly via Metav Werkzeuge or request application guidance from the consultancy team. DNMG 150404 AT9530 turning insert by Tungaloy — finishing and light machining of steel A DNMG150404 AT9530 turning insert designed for ISO-compliant external and internal turning, optimised for finishing and light machining of steel. ISO DNMG 150404 geometry for universal holders Coated cermet grade AT9530 for fine surface finish 55° rhombic shape with 0° clearance angle Cylindrical hole and double-sided chipbreaker Exceptional surface quality for finishing operations The DNMG150404 AT9530 insert is manufactured in a coated cermet grade that prioritises a superior surface finish and consistent wear across the cutting edge. Cermet materials combine ceramic hardness with metallic toughness to reduce built-up edge and produce stable cutting conditions during light to finishing passes. This translates into fewer re‑works, consistent component appearance and reduced finishing steps in serial production, particularly when working with steel. ISO compatibility and secure clamping for versatile use Thanks to the ISO DNMG 150404 geometry and standardised hole arrangement, the indexable insert integrates with common external holders and boring bars where form, clearance, tolerance class, fastening method, size and thickness match. The rhombic 55° shape offers access for both external and internal contours while the cylindrical hole ensures reliable seating during indexing. These attributes reduce setup variability and support quick insert changes, improving uptime in mixed production environments. Edge geometry and chip control for predictable performance A 0.4 mm corner radius and 0° clearance angle deliver a controlled cutting edge suited to finishing cuts, while the plate thickness of 4.76 mm supports rigidity under light machining loads. The double-sided chipbreaker promotes effective chip control on two usable cutting edges, aiding in consistent chip formation and evacuation. Together, these design choices enhance process repeatability and support higher first-pass quality with reduced manual intervention. For high-quality finishing select the Tungaloy AT9530 insert — contact Metav Werkzeuge for tailored recommendations and fast supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6773691 SKU: 6773691-Tungaloy Manufacturer SKU: TUN6773691 Facts Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Plate size: 15 mm Thickness: 4.76 mm Special features Coated cermet: AT9530 Cutting material type: coated cermet Substrate material: cemented carbide Shape: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Typical application: finishing and light machining of steel System: ISO indexable turning insert, compatible with ISO holders FAQ What materials is this insert best suited to machine? The DNMG150404 AT9530 Tungaloy turning insert is optimised for finishing and light machining of steel and delivers improved surface finish and wear stability in these applications. How does the insert index and how many cutting edges are available? This DNMG 150404 insert features a cylindrical hole and a double-sided chipbreaker, providing two usable cutting edges per index for efficient edge rotation and reduced tooling cost. Which geometric features support finishing performance? The 0.4 mm corner radius combined with a 0° clearance angle and the AT9530 coated cermet grade supports fine surface quality and predictable wear during finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, GH330 carbide grade and a compact rhombic geometry for consistent machining performance; order the insert via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. DNMG150404 GH330 Tungaloy insert for turning The DNMG150404 GH330 Tungaloy insert is an ISO-standard rhombic turning insert engineered for external and internal turning with a 0.4 mm corner radius and a double-sided chipbreaker for stable chip control. ISO-standard rhombic insert GH330 grade for wear resistance Double-sided chipbreaker 0.4 mm corner radius, 55° included angle Consistent cutting performance that raises productivity The rhombic, ISO-standard geometry provides a reliable baseline for workshop consistency and makes tool changeovers straightforward. Combined with the GH330 carbide grade, the insert delivers a balance of wear resistance and toughness that preserves the stable cutting edge under typical turning loads. This results in fewer unexpected tool changes and a steadier production flow, supporting improved throughput and predictable process windows. Secure fit and simple holder compatibility Compatibility with a tool holder depends on shape, clearance angle, tolerance class, fastening and thickness; this insert’s rhombic form, cylindrical-hole mounting and 0.4 mm corner radius simplify matching to standard ISO clamping systems. The 55° included angle and 0° clearance are clearly defined, so a correct holder selection minimises set-up time and ensures repeatable positioning. Such defined geometry supports reliable clamping and consistent contact between insert and seat. Adaptable to a variety of turning tasks Designed for general turning applications, the plate performs well for both external and internal operations when the correct chipbreaker and grade are selected for the workpiece and machining conditions. The double-sided chipbreaker offers economical use by providing multiple usable edges, while the tungsten carbide construction delivers thermal and mechanical stability. Selecting the appropriate chipbreaker style and machining parameters allows safe application across a wide range of turning tasks. Economic handling and predictable maintenance A robust cutting edge and the GH330 composition reduce flank wear and help maintain surface quality over longer tool life, contributing to lower tooling costs per component. The combination of easy indexing, standardised form and defined mounting—including a 4.76 mm thickness and 15 mm size—simplifies stock management and replacement procedures. Clear geometry and standardised fastening reduce downtime during insert changes, supporting overall shop-floor efficiency and leaner tool inventories. For workshop-ready performance choose the Tungaloy GH330 DNMG150404 insert and contact Metav Werkzeuge for application guidance or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6803322-Tungaloy Manufacturer article number: 6803322 Manufacturer SKU: TUN6803322 Manufacturer: Tungaloy Dimensions & geometry Size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 55° Clearance angle: 0° Materials & features Material: carbide Grade: GH330 Chipbreaker: double-sided Hole: cylindrical hole Plate form: rhombic System: ISO turning insert Application: turning FAQ What types of turning are suitable for this insert? The DNMG150404 GH330 Tungaloy insert is suitable for both external and internal turning operations when the correct chipbreaker and machining parameters are chosen. How does the GH330 grade influence tool life? The GH330 composition offers a balance of wear resistance and toughness that helps maintain a stable cutting edge and extends usable tool life under typical turning conditions. Which holder features must match the insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the insert’s rhombic form and cylindrical-hole mounting are designed for standard ISO clamping systems. Can the insert be indexed to use multiple cutting edges? Yes, the double-sided chipbreaker and rhombic geometry permit indexing to use alternate edges, improving cost-effectiveness for routine turning tasks. What is the exact designation and ordering reference? The item is listed as DNMG150404 GH330 Tungaloy insert, SKU 6803322-Tungaloy; use the manufacturer article number 6803322 for ordering references. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 GH330 Wendeplatten - Tungaloy
Combining the GH330 Tungaloy grade with the ISO rhombic geometry and a 0.4 mm corner radius delivers a durable, cost-effective turning solution that balances wear resistance and edge stability; order the DNMG150404 GH330 Tungaloy insert directly via Metav Werkzeuge or consult Metav Werkzeuge’s specialists for application advice. DNMG150404 GH330 ISO turning insert for turning — Tungaloy A DNMG150404 GH330 rhombic ISO turning insert engineered for external and internal turning, compatible with holders matched for form, clearance angle and tolerance class ISO rhombic DNMG150404 geometry GH330 Tungaloy grade, wear-resistant 0.4 mm corner radius for defined cuts Double-sided chipbreaker, with centre hole Engineered grade for longer tool life and consistent productivity The choice of the GH330 cutting grade provides a deliberate balance between wear resistance and edge toughness. Manufactured from carbide, the grade extends service intervals under continuous turning conditions and maintains cutting-edge integrity during interrupted cuts. This combination reduces unplanned tool changes, supporting steady production throughput while keeping tool management straightforward. For shops seeking predictable performance under typical turning cycles, the grade offers measurable improvements in tool life and process stability. Geometry tuned for repeatable surface finish and accurate profiles The rhombic insert form, defined as DNMG150404, delivers a controlled 55° cutting geometry that aids access to profiles and shoulder work. The 0.4 mm corner radius helps produce consistent surface finishes while preserving edge strength when light to medium material removal is required. Being ISO-standardised, the geometry ensures interchangeability with ISO-compliant holders and allows straightforward setup on standard tool posts. Explained simply: a balanced radius increases finish quality without sacrificing resistance to chipping during routine turning operations. System compatibility minimises setup complexity Reliable holder compatibility is achieved through matching of form, clearance angle and tolerance class; the insert’s 0° clearance angle and cylindrical hole enable secure clamping with standard shims and screws. The system approach—insert, compatible external holder, shim/clamp set and spare screws—reduces procurement complexity and downtimes associated with non-matching parts. Clear labelling and ISO conformity make stock management simpler and support quick replacement during scheduled tool changes, contributing to efficient shop-floor workflows. Practical application advice for process optimisation Intended for turning, the double-sided chipbreaker design allows economical use of both cutting edges before replacement, while the GH330 grade complements the geometry to suit a broad range of turning tasks. Select the chipbreaker and grade to match workpiece material and machining stability; for interrupted cuts or unstable set-ups, favour stability and toughness, for continuous cuts favour grades that emphasise wear resistance. The insert’s specifications make it a practical choice for precision production where repeatability and predictable costs per component are priorities. For tailored recommendations or to secure GH330 Tungaloy inserts for specific turning tasks, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and supply options. Technical data Article number: 6803312 Manufacturer SKU: TUN6803312 SKU: 6803312-Tungaloy Name: DNMG150404 GH330 Tungaloy insert Core specifications ISO code: 150404 Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included hole: Yes Insert angle: 55° Materials & features Material: carbide Grade: GH330 (Tungaloy) Chipbreaker: double-sided Shape: rhombic Mounting: cylindrical hole Series: ISO turning inserts FAQ Which holders are compatible with this insert? Compatibility depends on matching the insert form, clearance angle, tolerance class, mounting and thickness; the DNMG150404 GH330 Tungaloy insert fits ISO-compliant holders designed for DNMG 150404 geometry. For which applications is the GH330 grade recommended? The GH330 grade is intended for turning operations where a balance of wear resistance and edge stability is required; it complements the insert geometry for general external and internal turning. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius on the DNMG150404 GH330 insert provides improved surface finish and increased edge strength for light to medium cuts while helping to avoid premature chipping. Is the insert reversible or single-use per edge? This is a double-sided insert with a chipbreaker on both sides, enabling economical use of both indexed cutting edges before replacement or re-marking. What information is needed to order the correct insert? Provide the ISO designation (DNMG150404), the grade (GH330), manufacturer SKU if available, and holder details; this ensures the ordered insert matches the toolholder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of GH330 wear resistance, precise DNMG150404 ISO geometry and secure clamping for reliable turning performance; order the insert directly via Metav Werkzeuge or consult the technical team for application support. DNMG150404 GH330 Tungaloy turning insert — ISO DNMG 150404 for turning A DNMG150404 GH330 indexable carbide insert designed for ISO‑standard external and internal turning, combining a rhombic 55° geometry with a double‑sided chipbreaker for stable chip formation and consistent tool life ISO‑standard DNMG geometry GH330 high‑performance carbide grade Double‑sided chipbreaker for stable chips Cylindrical hole for secure clamping Proven wear resistance for predictable cycle times The GH330 grade is a Tungaloy‑developed carbide formulation that balances wear resistance and toughness to extend tool life under varying cutting conditions. As an ISO‑conforming indexable insert, the component offers repeatable positioning and dimensional reliability that reduce setup variation and scrap rates. The combination of a controlled substrate and tailored microstructure helps maintain a stable cutting edge, which translates directly into fewer tool changes and more consistent production throughput. Geometry and clamping engineered to reduce interruptions A rhombic 55° geometry with a 0.4 mm corner radius provides a robust cutting edge suitable for medium to light finishing passes, while the 0° rake angle contributes to predictable cutting forces and surface finish. The insert’s cylindrical hole and corresponding fastening style ensure accurate seat location and secure clamping in compatible holders. The double‑sided chipbreaker supports effective chip control across a range of feeds, lowering the risk of built‑up edge and reducing downtime caused by poor chip evacuation. System compatibility that simplifies integration Designed as part of an ISO‑standard turning system, the insert fits holders and bar tooling that match the DNMG150404 form, tolerance class and mounting style. Typical system components include a matching external holder or boring bar, a support underlay or clamp set and replacement screws where required. The product is intended for turning applications and performs best when the chipbreaker and grade are selected in line with workpiece material and machining stability. This approach supports predictable process windows and improved productivity. Contact Metav Werkzeuge for availability and application advice on Tungaloy DNMG150404 inserts, referencing SKU TUN6803284 or manufacturer item 6803284 via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6803284 Manufacturer SKU: TUN6803284 SKU: 6803284-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Grade: GH330 Core dimensions Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 55° Rake (free) angle: 0° Design & features Rhombic plate form With cylindrical hole Double‑sided chipbreaker ISO‑standard DNMG150404 designation Intended application: turning Typical system: insert + holder/underlay/clamp set + spare screws FAQ What materials is this insert suitable for? The DNMG150404 GH330 insert is designed for turning and performs across a wide range of materials when the chipbreaker and cutting parameters are matched; the GH330 carbide grade favours good wear resistance while retaining edge stability. How does the 55° geometry affect cutting? A 55° rhombic geometry offers a balance between edge strength and access to the workpiece; the DNMG150404 form provides a secure seating and reliable orientation in ISO holders, helping maintain consistent cutting engagement. Is the insert reversible and how many cutting edges are available? The insert features a double‑sided chipbreaker and can be indexed according to the DNMG geometry; the number of usable edges follows the standard indexing scheme for this plate form. Which clamping style is required for secure fixation? A holder designed for DNMG plates with a cylindrical hole and compatible fastening hardware provides the secure clamping required for stable operation with the DNMG150404 insert. How should the chipbreaker be selected? Select the chipbreaker variant and grade to match the workpiece material, machining type and machine stability; the double‑sided chipbreaker on this insert aids chip control for many turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com