DNMG 150404 AH120 Wendeplatten - Tungaloy
Combine the PVD‑coated AH120 grade with a 0.4 mm corner radius for wear resistance and precise profile control; the ISO rhombic geometry with a 55° lead angle ensures compatibility with standard holders. Order the DNMG150404 AH120 directly via Metav Werkzeuge or ask our consultants for holder and application advice. DNMG 150404 AH120 — PVD‑coated carbide turning insert, 0.4 mm radius (Tungaloy) A DNMG150404 AH120 indexable turning insert designed for ISO‑standard external and internal turning, offering a wear‑resistant PVD‑coated carbide grade for process‑secure machining. DNMG 150404 AH120 PVD-coated carbide for durability Double-sided chipbreaker for consistent chip control 0.4 mm corner radius for precise profile turning ISO rhombic plate, 55° lead angle, with cylindrical hole Longer tool life through a hard PVD layer and robust carbide grade The combination of PVD‑coated carbide and the AH120 grade delivers a balance of abrasion resistance and edge stability that supports sustained production runs. The thin, hard PVD layer reduces friction and improves thermal resistance at the cutting edge, which translates into extended tool life and fewer index changes. This performance is particularly valuable where the machining strategy demands a sharp cutting edge alongside reliable wear behaviour, helping to keep process interruptions to a minimum while maintaining consistent component quality. Consistent chip control and improved component finish Built‑in chip control comes from the double‑sided chipbreaker, which stabilises chip formation across a variety of cutting conditions. The 0.4 mm corner radius provides sufficient edge strength for finishing and profile work while allowing accurate contouring; a larger radius would increase strength but reduce form fidelity, whereas a smaller radius sharpens the profile at the expense of durability. The insert’s 55° lead angle also influences cutting forces and surface result, offering a good compromise between cutting direction and accessibility for external and internal turning operations. ISO compatibility and secure mounting for repeatable results Made to the ISO‑standard form, this rhombic insert features a cylindrical hole and a plate thickness of 4.76 mm, supporting secure clamping in compatible external holders or boring bars. Compatibility with a given holder depends on form, relief angle, tolerance class, fastening method, size and thickness; correct matching prevents movement under load and ensures repeatable seating when indexing. The clear, standardised geometry simplifies tool inventory and replacement, reducing set‑up time on the shop floor. Application guidance for reliable turning performance Intended for general turning duties, the insert performs well in external and internal operations where a sharp edge and process reliability are priorities. Selection of the chipbreaker style and the AH120 grade should be aligned with the workpiece stability and the chosen cutting strategy to achieve the desired balance of productivity and surface quality. Properly matched tooling, combined with correct clamping and cutting parameters, results in higher uptime and more predictable tool life for production environments. For process‑secure turning with the wear‑resistant AH120 grade, order the DNMG150404 AH120 from Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com / +49 2822 7131930 to confirm holder compatibility and application settings. Technical Data Article number: 6854299 SKU: 6854299-Tungaloy Manufacturer SKU: TUN6854299 Model series: ISO-Drehwendeschneidplatten Designation: DNMG150404 AH120 Material: Hartmetall Coating/grade: AH120 (PVD-coated) Shape: Rhombic Facts Corner radius: 0.4 mm Plate size: 15 mm Lead angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Special features Double-sided chipbreaker Cylindrical hole for secure fixing ISO-compatible rhombic geometry PVD-coated carbide grade AH120 Suitable for external and internal turning FAQ What machining operations is this insert designed for? The DNMG150404 AH120 indexable insert (Tungaloy, SKU 6854299-Tungaloy) is intended for external and internal turning operations and is specified where a sharp cutting edge and process reliability are required. How does the AH120 grade affect tool life and performance? The AH120 grade is a PVD‑coated carbide formulation that improves wear resistance and edge security under typical turning conditions, extending tool life and supporting stable production. Why is the 0.4 mm corner radius important? A 0.4 mm corner radius offers a compromise between edge strength and profile accuracy, enabling precise contour turning while maintaining sufficient resistance to edge chipping. How is compatibility with toolholders ensured? Compatibility depends on the insert’s form, relief angle (0°), tolerance class, fastening method, size and thickness; the ISO rhombic geometry and cylindrical hole facilitate standardised mounting in compatible holders. Can the chipbreaker be used for a range of cutting conditions? The double‑sided chipbreaker provides consistent chip control across varied cutting parameters, but chipbreaker selection should be matched to workpiece stability and machining strategy for optimal results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a wear‑resistant PVD‑coated AH120 grade and precise ISO‑standard geometry for reliable turning performance; the insert’s double‑sided chipbreaker and robust corner radius reduce downtime and maintain surface quality. Order the Tungaloy turning insert directly via Metav Werkzeuge or request tailored advice for holder compatibility. DNMG 150404 AH120 indexable turning insert for ISO turning — Tungaloy The DNMG 150404 AH120 is an ISO‑standard, rhombic indexable insert designed for external and internal turning operations where a sharp cutting edge and consistent process security are required PVD‑coated AH120 carbide for wear resistance Double‑sided chipbreaker for stable chip control Rhombic ISO insert, 55° cutting angle 0.4 mm corner radius, 4.76 mm thickness Stable chip control and prolonged tool life The combination of a PVD coating with the AH120 carbide substrate provides enhanced resistance to abrasive wear and edge breakage, resulting in a reliable cutting edge over extended runs. The double‑sided chipbreaker is engineered to generate short, controllable chips under a wide range of cutting conditions; this improves process stability and reduces interruptions for chip clearance. For operations with frequent tool changes, the grade’s resistance to chipping also translates into lower tooling costs per component and predictable performance in production. Geometry tuned for accuracy and surface finish A rhombic form with a 55° cutting angle and a 0.4 mm corner radius balances edge strength and surface quality. The moderate corner radius increases the insert’s resistance to mechanical shock while still permitting a fine surface finish when axial and radial engagements are set accordingly. The 4.76 mm plate thickness contributes to rigidity in the clamped system, reducing vibration and helping to maintain dimensional accuracy in external and internal turning tasks. These geometric parameters make the insert suitable for on‑centre turning and light profiling where repeatable tolerances matter. ISO compatibility and secure mounting in systems Produced to ISO standards, the insert’s compatibility with a holder is defined by shape, relief angle, tolerance class, mounting style, size and thickness. The system generally comprises the indexable insert, a suitable external holder or boring bar, a backing shim/clamping set and replacement fastening screws, which together determine clamping rigidity. Selection of the correct chipbreaker and grade should be matched to the workpiece material, machining strategy and machine stability to ensure process security. Metav Werkzeuge can provide assistance in matching the insert to the correct holder and clamping components. Practical applications and selection guidance Intended for general turning duties, the insert is appropriate when a sharp cutting edge and consistent performance are essential. The AH120 grade is geared towards operations where wear resistance and protection against edge failure are priorities; the double‑sided chipbreaker broadens applicability across varying cut depths and feed rates. For best results, choose the chipbreaker and insert grade according to the material being machined and the rigidity of the setup; this preserves tool life and optimises cycle time without compromising surface integrity. Contact Metav Werkzeuge for a compatibility check or quotation for the Tungaloy DNMG 150404 AH120 indexable insert and receive expert guidance on holder selection and clamping parts. Technical Data Article number: 6811731 Manufacturer SKU: TUN6811731 SKU: 6811731-Tungaloy Model series: ISO‑Drehwendeschneidplatten Name: DNMG150404 AH120 Tungaloy indexable insert Facts Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features Material: PVD‑coated carbide Grade: AH120 Chipbreaker: double‑sided Plate form: rhombic With hole: cylindrical hole Intended application: turning System components: compatible external holder or boring bar, backing shim/clamping set, replacement screws FAQ What holders are compatible with this insert? Compatibility depends on holder geometry and clamping method; the DNMG 150404 AH120 insert fits ISO‑standard holders matching its rhombic form, size and thickness — confirm holder form, tolerance and fastening to ensure proper seating. Which machining operations suit this grade best? The AH120 grade is intended for turning where a sharp edge and process security are required; it performs well in general external and internal turning applications with stable chip control provided by the double‑sided chipbreaker. How does the 0.4 mm corner radius affect cutting? A 0.4 mm corner radius increases edge robustness and reduces the risk of chipping under interrupted cuts while still allowing a good surface finish when feeds are selected appropriately for the DNMG 150404 insert. Is the coating suitable for high temperatures? The PVD coating on the AH120 grade offers improved wear resistance and helps maintain edge integrity at elevated temperatures typical of turning operations, contributing to longer tool life. What does the cylindrical hole mean for mounting? The cylindrical hole provides a secure central locating and fastening point within compatible ISO holders; combined with the correct shim and clamping set it ensures stable, repeatable seating of the indexable insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade AH6225 and a stable 55° rhombic geometry delivers consistent machining performance and reliable chip control for stainless steel turning; order directly via Metav Werkzeuge or consult our technical team for tailored recommendations. DNMG 150404 AH6225 — ISO rhombic indexable insert for turning by Tungaloy The DNMG150404 AH6225 is an ISO‑standard rhombic indexable insert designed for external and internal turning operations on stainless steels, offering a balanced cutting edge for medium machining and variable conditions. DNMG 150404 ISO rhombic 55° geometry PVD-coated carbide grade AH6225 for stainless steel Double-sided chipbreaker for consistent chip control 0.4 mm corner radius, cylindrical hole for secure clamping Maximise efficiency in stainless steel turning The PVD-coated carbide construction of this indexable insert provides a robust wear barrier that reduces flank and crater wear under fluctuating cutting conditions. In practice, the AH6225 grade is formulated as a universal option for stainless steels, combining a sharp cutting edge with sufficient toughness to resist chipping. This results in steady cutting performance across interrupted cuts and light to moderate depths of cut, reducing the need for frequent insert changes and contributing to predictable cycle times on production runs. Geometry and clamping that ensure process stability A 55° rhombic platform with a 0.4 mm corner radius offers a balance between edge strength and profile definition, suitable for general profiling and finishing passes. The insert’s double-sided chipbreaker supports predictable chip formation and evacuation, which improves surface finish and lowers the risk of built-up edge on stainless materials. The cylindrical hole and specified thickness create a secure interface with matched holders, so dimensional tolerances and correct clamping result directly in repeatable part quality and reduced rework. How the AH6225 grade improves productivity Selecting a universal grade like AH6225 reduces tooling complexity for mixed-material batches and variable machining conditions. The PVD layer enhances thermal resistance at the cutting edge, permitting stable cutting parameters and extended tool life when compared with uncoated alternatives in many turning scenarios. For operations where changeover speed and inventory simplicity matter, this grade can lower tooling costs per part by increasing the usable life of each insert while maintaining consistent surface integrity. System compatibility and recommended setup The insert is an ISO-type indexable plate that integrates into a conventional turning system: an ISO-compatible external holder or boring bar, a suitable shim or clamping set, and the correct fixing screw. Compatibility depends on the holder’s form, relief angle, tolerance class and the insert’s size and thickness; matching these parameters ensures correct seat contact and torque distribution during clamping. For best results, pair the insert with a holder that supports a 55° rhombic geometry and verify the holder’s seating for inserts with a cylindrical hole to prevent misalignment and uneven wear. For reliable production with Tungaloy’s AH6225 grade and fast delivery, contact Metav Werkzeuge for application advice and immediate supply at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6903189 SKU (manufacturer): TUN6903189 Item SKU: 6903189-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: AH6225 (PVD-coated) Shape designation: DNMG150404 Facts Corner radius: 0.4 mm Included angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Special features Rhombic plate form (55°) Double-sided chipbreaker Cylindrical hole for secure clamping Intended application: Turning (external & internal) Compatibility: ISO-standard insert — check holder form and tolerances FAQ What materials is this insert suitable for? The DNMG150404 AH6225 insert is formulated primarily for stainless steels; the AH6225 PVD-coated carbide provides a balance of sharpness and edge stability for medium machining duties. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker on this indexable insert enables consistent chip control, improving surface finish and reducing the chance of built-up edge during stainless steel turning operations. Which holders are compatible with DNMG 150404 inserts? Compatibility requires an ISO‑compatible holder that accepts DNMG‑type rhombic inserts with a cylindrical hole; ensure the holder’s relief angle, tolerance class and thickness match the insert specifications for secure clamping. What edge preparation is provided by the AH6225 grade? The AH6225 grade delivers a sharp yet stable cutting edge suited for variable conditions; the PVD coating enhances thermal resistance and contributes to longer usable life under typical stainless steel turning parameters. Is the DNMG150404 suitable for finishing passes? Yes, with its 0.4 mm corner radius and stable geometry the insert is suitable for many finishing and light profiling applications where a fine surface finish and precise dimensional control are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
The combination of a PVD-coated AH6225 carbide grade, a 55° rhombic geometry and a precise 0.4 mm corner radius delivers controlled cutting and consistent tool life for medium turning of stainless steels; order or request technical advice via Metav Werkzeuge for a reliable tool supply. DNMG 150404 AH6225 indexable turning insert by Tungaloy — 55° rhombic geometry, PVD-coated carbide The DNMG150404 AH6225 insert is an ISO indexable turning insert intended for general external and internal turning applications, optimised for machining stainless steels with a sharp yet robust cutting edge and a double-sided chipbreaker. PVD-coated carbide for stainless steel machining Rhombic 55° geometry for versatile turning Double-sided chipbreaker with stable cutting edge Cylindrical hole, 4.76 mm thickness, 0.4 mm radius High-performance grade for stainless steel turning The PVD-coated AH6225 carbide grade is developed as a universal solution for stainless steel applications, combining a sharp cutting edge with edge stability under varying conditions. This balance reduces the tendency for built-up edge and improves surface finish in medium cutting regimes, which supports higher process reliability and predictable component quality. The coating enhances wear resistance and heat tolerance, extending effective tool life and reducing changeover frequency, thus contributing to a more economical machining process. Precision geometry to control chips and extend edge life A 55° rhombic geometry paired with a 0.4 mm corner radius and a double-sided chipbreaker provides controlled chip formation and predictable cutting forces. The rhombic shape offers versatile lead angles for both facing and turning operations, while the chipbreaker design helps to fragment swarf and manage thermal load at the cutting edge. These elements together lower vibration and promote consistent cutting conditions, which is particularly beneficial in batch production or when machining workpieces with varying wall thicknesses. Seamless integration into ISO-compliant tool systems Supplied as part of the ISO indexable insert family, compatibility with a toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole for secure clamping, a plate thickness of 4.76 mm and a clearance angle of 0°, enabling straightforward replacement within standard tool systems. Using the correct matching holder and clamping set ensures repeatable positioning and stable machining, reducing setup time and the risk of misalignment during tool changes. The robust specification supports stable chip formation and consistent surface quality across production runs. Contact Metav Werkzeuge for original Tungaloy inserts and compatible holders: request DNMG150404 AH6225 tooling data or procurement support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947056 Manufacturer SKU: TUN6947056 Model series: ISO indexable turning inserts Facts ISO designation: 150404 Plate size: 15 mm Plate thickness: 4.76 mm Lead/approach angle: 55° Corner radius: 0.4 mm Clearance angle: 0° Special features Carbide substrate PVD coating Rhombic plate form Double-sided chipbreaker Cylindrical hole for clamping Designed for turning applications Universal grade for stainless steels FAQ What material is this insert optimised for? The DNMG150404 AH6225 insert is optimised for machining stainless steels and provides a balance of sharpness and edge stability for medium turning operations. Which ISO designation should be referenced for holder compatibility? Refer to the ISO designation 150404 when selecting a compatible holder; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness. Can the insert be used for internal turning as well as external turning? Yes, the rhombic 55° geometry and double-sided chipbreaker make the insert suitable for both external and internal turning applications. How does the AH6225 grade improve tool life compared with uncoated grades? The PVD-coated AH6225 carbide grade enhances wear resistance and heat tolerance, reducing edge degradation under variable cutting conditions and extending effective tool life. What is the exact article reference for ordering from stock suppliers? Order using article number 6947056 or manufacturer SKU TUN6947056 to ensure the correct DNMG150404 AH6225 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of high process reliability and versatile applicability: the PVD-coated carbide grade delivers a sharp yet robust cutting edge for consistent mid-range turning of stainless steels, while ISO conformity ensures straightforward holder compatibility. Order originals via Metav Werkzeuge or consult our specialists for application advice. DNMG 150404 AH6225 — ISO turning insert by Tungaloy (PVD-coated carbide, 55°) The DNMG150404 AH6225 Tungaloy insert is a rhombic, ISO-standard indexable insert designed for external and internal turning, offering a stable, sharp cutting edge for mid-range machining of stainless steels ISO rhombic insert DNMG150404 PVD-coated carbide AH6225 Optimised for stainless steel machining High productivity from a stable cutting geometry The combination of PVD-coated carbide and the AH6225 grade provides a dependable balance between edge sharpness and wear resistance, which directly improves cycle times in medium-duty turning operations. The coating supports reduced built-up edge formation on stainless steel, while the substrate material maintains a durable cutting edge under variable conditions. This results in fewer indexings and more consistent part quality, so machining processes run more predictably and with improved throughput. Designed for secure clamping and simple integration Compatibility with clamping systems is governed by form, clearance angle, tolerance class, fastening, size and thickness; this insert matches ISO specifications for straightforward installation in matched holders and boring bars. The rhombic plate with a cylindrical hole and the specified dimensions (15 mm inscribed circle, 4.76 mm thickness) ensure reliable seating and repeatable positioning, reducing setup time and minimising the risk of inaccurate seating that can affect surface finish and tool life. Versatile chip control and application-focused performance The double-sided chipbreaker and a 0° clearance specification support stable chip formation across interrupted and continuous cutting conditions, particularly when machining rostfreier Stahl (stainless steel). The small 0.4 mm corner radius assists in producing fine surface finishes while limiting radial engagement for lower cutting forces where required. Together, these features make the grade suitable for a wide range of turning tasks where balance between tool life and surface integrity is essential. For technical advice or to secure genuine Tungaloy DNMG150404 AH6225 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for supply and application support Technical data Article number: 6947135 Manufacturer SKU: TUN6947135 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Inscribed circle: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Approach/relief angle: 55° Manufacturer item number: 6947135 Special features PVD-coated carbide grade AH6225 Rhombic plate form (DNMG) Double-sided chipbreaker Cylindrical hole for secure clamping ISO-standard indexable insert Intended for turning applications, external and internal Universal grade engineered for stainless steel machining FAQ What materials is this insert suitable for? The Tungaloy DNMG150404 AH6225 insert is formulated as a universal grade for stainless steel machining and performs well in a range of similar alloys. Can this insert be used for both external and internal turning? Yes, the ISO rhombic geometry and double-sided design allow the insert to be used for both external and internal turning operations. How does the AH6225 grade affect tool life? The AH6225 PVD-coated carbide provides a balanced combination of edge sharpness and wear resistance, which enhances tool life in medium-duty turning and under variable cutting conditions. What are the critical dimensions to check for holder compatibility? Verify the insert form (DNMG), inscribed circle (15 mm), thickness (4.76 mm), hole style (cylindrical), and tolerance class to ensure proper fit in the chosen holder. Is the chip control suitable for interrupted cuts? The double-sided chipbreaker supports stable chip formation and can cope with interrupted conditions typical in many turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated cemented carbide grade AH6225, a 55° DNMG form and a 0.4 mm corner radius for consistent performance in stainless-steel turning; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150404 AH6225 Tungaloy turning insert — PVD-coated carbide, 55° rhombic form The DNMG150404 AH6225 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for medium machining of stainless steels with a sharp yet stable cutting edge PVD-coated cemented carbide AH6225 55° rhombic DNMG form with 0.4 mm radius Double-sided chipbreaker for versatile turning Consistent cutting performance for stainless steels The combination of a PVD-coated surface and cemented carbide substrate gives a balance of wear resistance and edge stability that suits stainless steel machining under changing conditions. The AH6225 grade is formulated as a universal cutting material that maintains a sharp cutting edge while resisting edge breakdown during interrupted or variable-depth cuts. The coating reduces adhesion and built-up edge formation, which improves surface quality and extends the effective life of the insert; this leads to fewer changeovers and more consistent cycle times on production runs. Smooth integration into ISO tooling systems Compatibility with toolholders is governed by the insert form, relief angle, tolerance class, fastening and plate thickness; the DNMG geometry follows ISO norms to ensure reliable seating in standard holders. The 55° rhombic shape provides a good compromise between strength and accessibility for turning contours, while the 0° relief and 4.76 mm thickness deliver stable clamping and rigidity. The insert is supplied with a cylindrical hole for positive location and is double-sided, allowing rotation to a fresh edge and reducing inventory cost per cutting edge in the toolroom. Reliable chip control and recommended applications A double-sided chipbreaker design supports controlled chip formation for both external and internal turning operations, improving evacuation and reducing risk of chip entanglement in longer cycles. This arrangement is particularly useful when machining medium feeds and depths of cut in stainless steel where chip control affects surface finish and tool life. For system build-up, the cutting package comprises the indexable insert together with a matched external holder or boring bar, plus shim/clamping set and replacement screws to complete a robust tooling solution. Production benefits and operational guidance Choosing a universal grade such as AH6225 helps standardise tooling across mixed batches and reduces the need for multiple specialised grades, contributing to smoother production planning and lower tooling complexity. Where process security and repeatability are priorities, the PVD-coated AH6225 insert supports steady performance with fewer unplanned interventions. For best results, select the chipbreaker and cutting parameters to suit the specific stainless-steel grade and the desired surface finish; when in doubt, consult Metav Werkzeuge’s technical advisors for parameter recommendations and holder compatibility. Contact Metav Werkzeuge for tailored application support on the Tungaloy DNMG150404 AH6225 turning insert and to check current stock and delivery options — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Manufacturer item number: 6947252 Manufacturer SKU: TUN6947252 Stock SKU: 6947252-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG150404 AH6225 Tungaloy insert Facts ISO code: 150404 Insert geometry angle: 55° Relief angle: 0° Corner radius: 0.4 mm Plate size: 15 mm Thickness: 4.76 mm Special features Material: cemented carbide Coating: PVD Grade: AH6225 Double-sided chipbreaker Cylindrical hole for positive location Rhombic plate form (DNMG) Application: turning (external & internal) System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ What workpieces is this insert suited to? The DNMG150404 AH6225 insert is intended primarily for machining stainless steel and performs well in medium cutting conditions where a balance of sharpness and edge stability is required. How does the PVD coating affect performance? The PVD-coated cemented carbide of this Tungaloy turning insert reduces friction and adhesion, improving wear resistance and decreasing the tendency for built-up edge during stainless-steel turning. Can the insert be rotated or indexed on-site? Yes, the DNMG150404 is double-sided and can be indexed to a fresh cutting edge; this extends usable tool life before complete replacement is required. Which holder features are required for correct compatibility? Compatibility depends on the DNMG form, relief angle, tolerance class, fastening method, plate size and thickness; holders and boring bars designed for DNMG 150404 inserts and a 4.76 mm thickness are appropriate. Is this insert supplied with mounting hardware? The standard system build-up for this insert includes the indexable plate plus the matched holder or boring bar, and a shim/clamping set and replacement screws are typically required to complete the assembly Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO geometry, a sharp yet stable PVD-coated grade and double-sided economy for steady turning performance; order the inserts directly via Metav Werkzeuge or contact our consultants for application support. DNMG 150404 AH6225 — Turning insert by Tungaloy with PVD-coated grade for stainless steels The DNMG150404 AH6225 Tungaloy insert is an ISO rhombic turning insert designed for external and internal turning of stainless steels and similar materials ISO rhombic insert DNMG 150404 for turning PVD-coated AH6225 carbide for stainless steels Sharp, stable cutting edge for medium machining Consistent edge life from a PVD-coated universal grade The AH6225 grade is a PVD-coated carbide developed for reliable performance when machining stainless steels under varying conditions. Its balance between hardness and toughness produces a sharp cutting edge that resists chipping during interrupted cuts while still providing good wear resistance for medium cutting parameters. This combination reduces the frequency of index changes and supports predictable tool life, which helps to plan production cycles with fewer disruptions. Geometry that ensures repeatable accuracy and secure clamping The rhombic geometry with a 55° included angle and a 0.4 mm corner radius combines freedom for approach angles with edge robustness for finishing and semi-finishing operations. The insert’s ISO designation ensures compatibility with standard external holders when form, tolerance, relief angle and thickness are matched. Clear geometry translates into consistent surface finish and repeatable dimensional results, particularly important where process stability and interchangeability matter. Economical double-sided use and practical handling The insert is double-sided, allowing efficient use of both cutting edges before replacement, which lowers tooling cost per cutting edge. The central cylindrical hole and standard mounting form facilitate straightforward seating and clamping in common toolholders; spare screws and wedge sets typical for ISO systems complete the setup. The 4.76 mm thickness adds rigidity in clamping, reducing vibration risk and supporting higher achievable feeds without compromising dimensional control. Application guidance and material match for turning tasks Engineered for turning, the insert performs well in external and internal operations where a mix of moderate cutting speeds and intermittent conditions occur. Its PVD-coated carbide substrate is suitable for stainless steels and similar alloys; for highly abrasive or unusually hard workpieces, select grades and chipbreakers matched to the specific condition. When integrating into an existing toolline, verify holder compatibility with the ISO 150404 geometry, relief angle and tolerance class to ensure secure seating and correct rake behaviour. Contact Metav Werkzeuge for tailored advice on holder compatibility and recommended cutting data for Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947170 Manufacturer SKU: TUN6947170 SKU: 6947170-Tungaloy Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Geometry: DNMG150404 Included angle: 55° Corner radius: 0.4 mm Plate size: 15 mm Plate thickness: 4.76 mm Relief angle: 0° Special features Grade/coating: AH6225, PVD-coated carbide Application: external and internal turning Chipbreaker: double-sided Hole: with cylindrical hole Compatibility: ISO holder forms and tolerances FAQ What materials is this insert suitable for? The answer: The AH6225 grade on the DNMG150404 insert is optimised for stainless steels and offers a compromise of edge sharpness and wear resistance for common turning tasks. Can the insert be used on both external and internal turning operations? Yes. The ISO rhombic form and the cylindrical hole allow the insert to be clamped in compatible external holders and boring bars for internal turning when the holder matches the ISO 150404 geometry. How many usable edges does this insert provide? This is a double-sided insert, offering two primary cutting edges per index; flipping and indexing extend the usable life before replacement. What should be checked to ensure holder compatibility? Verify holder form, relief angle, tolerance class, fastening method, size and plate thickness (4.76 mm); correct matching guarantees secure clamping and intended cutting geometry. Is the product available with a chipbreaker suited for heavy depths of cut? The insert is supplied with a double-sided chipbreaker tailored for medium machining; for heavy depths or high-volume removal, select a chipbreaker and grade matched to the specific machining strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Take advantage of high process reliability and flexible application: the combination of a PVD-coated carbide grade AH6225 and a 0.4 mm corner radius ensures durable cutting edges and consistent surface quality in medium turning operations; order directly via Metav Werkzeuge or consult the specialists for tailored recommendations. DNMG 150404 AH6225 indexable turning insert — Tungaloy, 0.4 mm radius, with hole DNMG 150404 AH6225 is an ISO‑standard indexable turning insert designed for external and internal turning, optimised for machining stainless steels under varying conditions DNMG 150404 geometry, rhombic 55° cutting angle PVD-coated carbide grade AH6225 for stainless steel 0.4 mm corner radius for consistent edge strength Double-sided chipbreaker with central hole Higher productivity through a robust grade and proven geometry The combination of a PVD-coated carbide substrate and the AH6225 grade gives reliable performance when machining stainless steels. The coating increases wear resistance and reduces built‑up edge under intermittent cutting, while the substrate maintains toughness. This results in fewer insert changes and longer uninterrupted machining cycles, so production stays productive and predictable. The insert geometry supports efficient chip formation and contributes directly to lower machining costs per component. Secure clamping and simple compatibility reduce setup time Designed to ISO dimensions, the insert fits standard DNMG holders where form, relief angle, tolerance class, fastenings, size and thickness match. The rhombic shape with a central cylindrical hole enables positive location and simple clamping, while the double‑sided design provides cost‑effective indexing. Using holders and clamp sets that comply with ISO ensures repeatable seating and reduces the risk of vibration or chipping, which in turn stabilises machining and improves process repeatability. Cutting edge geometry for surface quality and edge stability A 0.4 mm corner radius offers a balanced compromise between edge strength and achievable surface finish for medium cutting depths. The 55° cutting angle typical of DNMG geometry provides accessible cutting forces and directional stability for external and internal contours. The PVD coating minimises friction and enhances heat resistance at the cutting zone, which helps to maintain a sharp cutting edge under changing conditions and supports consistent surface roughness on stainless components. Practical application advice for workshop and production Best suited to medium‑duty turning of stainless steels, the insert performs well in both finishing and light roughing when paired with appropriate cutting data and a holder matched for rigidity. Select the chipbreaker and grade according to workpiece material and the rigidity of the setup; a stable machine and correct coolant strategy further extend tool life. For job shops and production environments seeking a reliable, versatile insert for mixed stainless‑steel work, this solution offers a straightforward way to standardise tooling while keeping stock and changeover times low. Contact Metav Werkzeuge for a tailored feed and speed recommendation or to confirm holder compatibility for the DNMG 150404 AH6225 insert — Metav Werkzeuge can advise on matching holders, clamp sets and replacement screws to ensure immediate integration into the machining process. Technical data Manufacturer article number: 6950964 Our SKU: 6950964-Tungaloy Manufacturer SKU: TUN6950964 Model series: ISO indexable turning inserts Product name: DNMG150404 AH6225 Core data Corner radius: 0.4 mm Cutting angle: 55° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Special features Material: carbide Coating / grade: PVD‑coated, AH6225 Plate form: rhombic Mounting: with central cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) Typical system: ISO insert with matching holder, backing pad and clamping set FAQ What materials is this insert suitable for? The DNMG 150404 AH6225 insert is formulated for machining stainless steels; the AH6225 grade and PVD coating deliver controlled chip formation and edge stability for such alloys. How does the insert locate and clamp in the holder? Location is achieved via the rhombic shape and the central cylindrical hole; the insert seats in an ISO‑compatible pocket and is secured with the appropriate clamping set and screw for reliable repeatability. Can the insert be indexed to use both sides? Yes, the double‑sided design allows indexing to the unused cutting edges, which extends the effective tool life of each insert and reduces tooling cost per part. What benefits does the PVD coating provide? PVD coating on the AH6225 grade reduces friction at the cutting interface, improves wear resistance and helps prevent built‑up edge when turning stainless steels under medium cutting conditions. Is the insert suitable for roughing and finishing? The geometry and 0.4 mm corner radius make the insert versatile for light to medium roughing and finishing; pairing with a rigid holder and adapted cutting data will yield the best combination of tool life and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge and proven PVD coating to improve consistency in stainless steel turning; the 55° rhombic geometry and 0.4 mm corner radius deliver a reliable balance between surface finish and tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG 150404 AH6225 ISO rhombic turning insert, 55° geometry — Tungaloy A DNMG150404 AH6225 indexable insert engineered for external and internal turning, optimised for machining stainless steel with a PVD-coated cemented carbide grade that balances sharpness and edge stability PVD-coated carbide grade AH6225 55° rhombic geometry, 0° clearance 0.4 mm corner radius for versatile finishes Cylindrical hole, double-sided indexable insert Predictable cutting performance for stainless steel applications The combination of a PVD-coated carbide grade and a 55° rhombic geometry ensures stable chip formation and consistent results when machining stainless steel. The AH6225 grade is formulated to offer a sharp yet durable cutting edge under medium cutting conditions and varying setups, supporting reliable cycle times and fewer interruptions. The 0° clearance and the insert’s geometry permit neutral cutting forces, which helps to reduce chatter on slender workpieces and enhances dimensional control during both external and internal turning. Consistent surface quality with controlled edge strength A corner radius of 0.4 mm provides a well‑balanced compromise between edge strength and surface finish: it resists edge chipping while enabling good part appearance without excessive cutting forces. The insert’s double-sided design and cylindrical hole allow secure clamping and economical indexing, doubling the usable cutting edges per insert and reducing tooling costs per component. The 4.76 mm plate thickness contributes to rigidity in the cutting zone, which supports stable machining and repeatable tolerances on serial production runs. Easy integration into ISO turning systems and shop workflows Compatibility with cartridge and screw-in holders depends on form, clearance angle, tolerance class, attachment style, size and thickness; this indexable insert fits standard ISO turning systems and is accompanied in practice by a holder, clamping kit and spare screws for quick assembly. Selecting the appropriate chipbreaker and grade relative to material, cut type and machine stability will optimise productivity and tool life. This approach reduces setup time, lowers scrap risk and provides predictable tool-change intervals—helpful for planning in process-oriented manufacturing environments. Discuss application requirements and ordering options with Metav Werkzeuge: email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice on the Tungaloy AH6225 turning grade and compatible holders Technical data Article number: 6825794 Manufacturer SKU: TUN6825794 Item SKU: 6825794-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Facts Insert geometry: 55° Clearance angle: 0° Corner radius: 0.4 mm Thickness: 4.76 mm Size: 15 mm Special features PVD-coated cemented carbide grade AH6225 Rhombic plate form, ISO DNMG 150404 Cylindrical hole, double-sided chipbreaker Suitable for external and internal turning Compatible with ISO turning holders; system requires holder, clamping set and screws FAQ Which materials is this insert optimised for? The DNMG150404 AH6225 insert is optimised for stainless steel machining; the PVD-coated carbide grade is selected for a sharp, stable cutting edge in medium turning operations. Can the insert be indexed to use multiple cutting edges? Yes, the double-sided design allows indexing to use additional edges; the cylindrical hole and secure clamping deliver repeatable positioning for each orientation. How does the 0.4 mm corner radius affect performance? A 0.4 mm radius offers a balance between edge strength and surface finish, improving resistance to chipping while still enabling a good surface appearance on turned parts. What determines compatibility with a turning holder? Compatibility is determined by form, clearance angle, tolerance class, attachment type, plate size and thickness; ensure the holder matches the ISO DNMG 150404 specifications. What are the manufacturer article and SKU numbers? Manufacturer article number 6825794 and manufacturer SKU TUN6825794 identify this Tungaloy DNMG150404 AH6225 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH6225 carbide grade that balances a sharp yet stable cutting edge with consistent performance in medium turning operations; combine this with the ISO compatibility of the rhombic geometry and a precise 0.4 mm corner radius to support smooth, repeatable production. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150404 AH6225 Tungaloy turning insert – ISO indexable insert for turning, 0° relief, 0.4 mm radius A DNMG150404 AH6225 Tungaloy indexable insert designed for ISO-standard turning, optimised for machining stainless steel with a robust PVD-coated carbide grade PVD-coated carbide grade AH6225 Optimised for stainless steel machining ISO DNMG150404 rhombic 55° geometry Double-sided design with cylindrical hole 0.4 mm corner radius for precise turning Consistent cutting performance for stainless steel turning The PVD-coated carbide composition of the AH6225 grade delivers a combination of a sharp, wear-resistant edge and sufficient toughness for medium cutting depths. This balance helps to reduce flank wear and sustain a reliable surface finish when machining stainless steel, particularly under varying feed and speed conditions. The PVD layer improves thermal and chemical resistance at the cutting edge, which translates into more stable tool life and fewer interruptions during batch production. Choosing a grade that emphasises both edge stability and economy supports higher uptime and predictable component quality. Precision geometry that ensures secure mounting and easy indexing The ISO DNMG150404 rhombic shape with a 55° wedge angle and 0° relief gives predictable cutting engagement and is widely supported by standard ISO holders. The insert’s double-sided design and cylindrical hole enable secure clamping and straightforward indexing to refresh the cutting edge, reducing changeover time. With a 0.4 mm corner radius and a plate thickness of 4.76 mm, the geometry is suited to controlled chip formation in external and internal turning tasks. Compatibility to the chosen holder is determined by form, relief angle, tolerance class, fastening and plate thickness—making this insert a pragmatic choice for customers seeking standardised, interchangeable tooling. Productivity and economical machining in everyday production Designed for turning operations, the insert offers stable chip control when paired with the appropriate double-sided chipbreaker and cutting parameters. The AH6225 grade is positioned as a universal solution for stainless steel, combining durability with reliable edge performance across batch sizes and mixed-series production. Selecting the right chipbreaker and optimising cutting data can shorten cycle times and reduce tooling costs per component, while the ISO-standard form supports rapid replacement and inventory rationalisation. Together, these aspects encourage process security and consistent surface quality in routine manufacturing. For guidance on integrating the Tungaloy AH6225 insert into specific turning applications or to check availability through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947089 Manufacturer SKU: TUN6947089 SKU: 6947089-Tungaloy Model series: ISO indexable turning inserts Core specifications Insert designation: DNMG150404 Grade / coating: AH6225, PVD-coated carbide Corner radius: 0.4 mm Insert size: 15 mm Plate thickness: 4.76 mm Insert angle: 55° Relief angle: 0° Special features Insert shape: rhombic Mounting: with hole Hole style: cylindrical hole Cutting edge: double-sided Application: turning Material: carbide FAQ Which materials is this insert best suited for? The DNMG150404 AH6225 Tungaloy turning insert (SKU 6947089-Tungaloy) is optimised for machining stainless steel and performs well under medium cutting conditions when paired with the correct chipbreaker. How does the AH6225 PVD coating help in production? The PVD-coated AH6225 grade provides improved wear and thermal resistance for the cutting edge, which promotes consistent tool life and better surface finish during turning operations with the DNMG150404 insert. Is the insert compatible with standard ISO holders? Yes, the rhombic ISO geometry, 55° angle and 0° relief make the DNMG150404 insert compatible with ISO-standard turning holders; compatibility also depends on holder form, tolerance and clamping method. How is the insert mounted and indexed? The DNMG150404 insert features a cylindrical hole for secure clamping and a double-sided design that allows indexing to a fresh cutting edge when required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade AH6225, a 55° DNMG geometry and a 0.4 mm corner radius for reliable medium-duty turning of stainless steel; order the insert directly via Metav Werkzeuge or ask the consultants for compatibility and batch options. DNMG150404 AH6225 DNMG turning insert — Tungaloy, PVD-coated carbide, 55° The DNMG150404 AH6225 is an ISO-standard indexable insert for external and internal turning, designed for medium machining of stainless steel and variable cutting conditions. ISO DNMG geometry, 55° lead angle PVD-coated carbide grade AH6225 0.4 mm corner radius for precision Double-sided chipbreaker, rhombic shape Consistent cutting performance for stainless steel The combination of a PVD-coated carbide substrate and the AH6225 grade delivers a balance between edge sharpness and robustness, specifically tuned for stainless steel. The coating reduces adhesion and helps to maintain a stable cutting edge during interrupted cuts and variable feeds, which supports predictable tool life and repeatable component quality. For shops moving between finishing and semi-finishing tasks, this insert offers a dependable compromise between surface integrity and productivity. Design and dimensions that aid rigidity and accuracy The ISO DNMG150404 geometry with a 55° included angle and a 0.4 mm corner radius provides controlled contact conditions and reduced radial forces, aiding dimensional stability on slender workpieces. The insert’s 4.76 mm plate thickness contributes to stiffness when mounted in a suitable holder; the presence of a cylindrical clamp hole ensures secure fastening and correct seating. Compatibility with the chosen holder is governed by form, clearance angle, tolerance class, fastening, size and thickness, so matching the DNMG geometry to a holder rated for ISO DNMG plates ensures consistent clamping and repeatable results. Efficient chip control and economical indexing A double-sided chipbreaker and two usable sides per face reduce tooling costs and machine downtime through economical indexing. The rhombic plate form enables access to both external and internal turning applications where a 55° lead angle is advantageous. For manufacturing environments that demand constant output and minimal tool changes, this insert supports continuous operation and straightforward handling during index changes, contributing to lower operating costs over multiple workpieces without sacrificing process reliability. Practical advantages for process planning Because the insert is ISO-standardised, integration into existing toolsets is straightforward: the ISO designation simplifies procurement and storage, while the AH6225 grade provides broad applicability across stainless steel variants under medium cutting conditions. The PVD coating enhances wear resistance and reduces built-up edge tendencies, which in turn helps to maintain consistent surface finish and dimensional control. When selecting cutting parameters, consider the insert’s balance of sharpness and stability to exploit its strengths in both finishing passes and light semi-finishing. For reliable medium-duty turning with AH6225 inserts, contact Metav Werkzeuge for supply and holder-compatibility advice via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss batch sizes and delivery options. Technical data Article number: 6825111 Manufacturer SKU: TUN6825111 Item SKU: 6825111-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150404 AH6225 Tungaloy-Wendeplatte Core specifications ISO designation: 150404 Inscribed circle / plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Lead angle: 55° Clearance angle (relief): 0° Material & features Material: Hartmetall (carbide) Coating / grade: AH6225, PVD-coated Geometry: DNMG, rhombic plate form Chipbreaker: double-sided Hole style: cylindrical hole (with hole) Typical application: external and internal turning Suitable for: stainless steel FAQ What materials is this insert designed for? The AH6225 grade of the DNMG150404 insert is formulated as a universal grade for stainless steel, offering a balance of edge sharpness and stability under medium machining conditions. How is holder compatibility determined for the DNMG150404 AH6225 insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and plate thickness; matching these parameters to the ISO DNMG geometry ensures secure clamping and correct seating of the Tungaloy insert. What are the key dimensions to consider when selecting this insert? Important dimensions include the 15 mm inscribed circle, 4.76 mm plate thickness, 0.4 mm corner radius and the 55° lead angle; the insert also features a cylindrical clamp hole for secure fastening. What benefits does the PVD coating provide for this insert? The PVD coating on the AH6225 grade improves wear resistance and reduces adhesion tendencies, helping the DNMG150404 insert to maintain a stable cutting edge and consistent surface finish during stainless steel machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Robust PVD-coated carbide grade AH6225 and a rhombic ISO profile provide a balanced combination of sharp cutting and edge strength for medium turning tasks; compatibility with ISO DNMG 150404 holders ensures straightforward integration. Order the insert directly via Metav Werkzeuge or request application advice from the consultants if selection help is required. DNMG 150404 AH6225 indexable turning insert (rhombic, 0° rake) — Tungaloy The DNMG150404 AH6225 is an ISO rhombic indexable insert for external and internal turning, engineered for medium machining of rostfreier Stahl with a focus on consistent edge life and reliable chip control. PVD-coated carbide grade AH6225 ISO DNMG 150404 rhombic profile Double-sided chipbreaker, cylindrical hole Proven edge performance for medium turning operations The combination of a PVD-coated surface and a carbide substrate delivers a durable cutting edge that balances sharpness and stability. The applied coating AH6225 reduces flank wear and supports stable chip formation when machining rostfreier Stahl, which helps to maintain part accuracy over longer production runs. This leads to fewer interruptions for insert changes and a more predictable tool life, making the solution attractive for series production and mixed-batch work. Geometry and clamping: predictable compatibility and secure fixation Built to the ISO DNMG 150404 shape with a rhombic form and a 0° rake, the insert gives a mix of cutting versatility and edge robustness. The geometry requires a matching holder by form, clearance angle, tolerance class, fastening method, size and thickness; correct pairing reduces vibration and secures repeatable results. The cylindrical hole and standard fastening allow use in many commercial DNMG-capable toolholders, simplifying stocking and holder management across turning centres and lathes. Practical chip control and material adaptability for reliable machining The double-sided chipbreaker supports effective chip segmentation in medium cuts, improving evacuation and surface finish while extending usable edge life through indexed turning. Because the grade is specified for rostfreier Stahl, the cutting edge sustains performance across changing conditions, such as variable feed or interrupted cuts. For customers less familiar with coatings: PVD (physical vapour deposition) places a thin, wear-resistant layer on the carbide substrate to improve adhesion and thermal resistance without sacrificing edge sharpness. Contact Metav Werkzeuge for a compatibility check and application-specific recommendations — Metav Werkzeuge's technical team can advise on holder matching, cutting strategy and process optimisation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6825893 Manufacturer SKU: TUN6825893 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall ISO designation: DNMG150404 Core figures Plate thickness: 4.76 mm Plate size: 15 mm Corner radius: 0.4 mm Clearance (rake) angle: 0° Included angle: 55° Hole style: cylindrical Special features Coating / grade: AH6225 Coating type: PVD Shape: rhombic Chipbreaker: double-sided Hole: with hole Typical application: external and internal turning Compatible with DNMG holders when matching form and dimensions FAQ Which materials is this insert designed for? The DNMG150404 AH6225 insert is specified primarily for rostfreier Stahl and performs well in medium turning tasks where a balance of sharpness and edge stability is required. How does the AH6225 coating improve performance when machining rostfreier Stahl? The AH6225 PVD coating increases wear resistance and thermal stability, promoting consistent chip formation and reducing flank wear during extended machining of rostfreier Stahl. What must be checked to ensure holder compatibility? Compatibility depends on the holder's form, clearance angle, tolerance class, fastening type, size and plate thickness; matching these parameters ensures secure clamping and repeatable machining. Is the insert reversible or indexable on both sides? Yes, the double-sided design provides two usable cutting edges per index, extending the effective life before replacement. What are the manufacturer's article number and SKU for ordering? The article number is 6825893 and the manufacturer SKU is TUN6825893 for the DNMG150404 AH6225 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
High-performance PVD-coated AH6225 carbide in a 55° DNMG format provides a sharp yet stable cutting edge optimised for stainless-steel turning; ISO compatibility reduces setup complexity. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. DNMG150404 AH6225 turning insert, PVD-coated carbide for turning — Tungaloy The DNMG150404 AH6225 is a rhombic, ISO-standard indexable insert designed for external and internal turning in demanding stainless-steel applications. PVD-coated carbide grade AH6225 Designed for stainless steels 55° rhombic form DNMG Double-sided insert with cylindrical hole Reliable performance for stainless-steel turning The PVD-coated AH6225 grade combines a finely tuned coating with a tough carbide substrate to deliver a sharp cutting edge that remains stable under variable conditions. This indexable plate is optimised for medium machining of stainless steels, offering consistent chip control and extended edge life compared with uncoated grades. The result is improved process reliability and fewer tool changes, which supports continuous production and predictable part quality. ISO compatibility that reduces setup time The DNMG geometry follows ISO standard dimensions, so a matching holder and clamping set ensure fast, repeatable mounting. The insert’s 55° rhombic form and 0° relief produce predictable cutting forces and accessibility in both external and internal turning tasks. With a plate size of 15 mm and a thickness of 4.76 mm, the insert fits common ISO clamping systems; compatibility is determined by form, relief, tolerance class, fastening, size and thickness, simplifying tool management across machines. Secure clamping and process versatility A cylindrical hole and double-sided design permit economical indexability and positive clamping, while the built-in chipbreaker geometry supports stable chip formation in mixed operation modes. The plate is suitable for a range of workpiece conditions typical in stainless-steel turning, offering stable surface finish and repeatable dimensional results. Using a proven Tungaloy grade means predictable tool life and reduced scrap rates, contributing to overall production efficiency. For reliable turning with Tungaloy’s AH6225 grade, contact Metav Werkzeuge for tailored selection support and quote SKU TUN6825541 to ensure rapid supply and correct specification Technical data Article number: 6825541 Manufacturer SKU: TUN6825541 Model series: ISO-Drehwendeschneidplatten Label: DNMG150404 AH6225 Tungaloy-Wendeplatte Core specifications Cutting edge radius: 0.4 mm Included angle: 55° Relief/clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Design & features PVD-coated carbide AH6225 Rhombic plate, DNMG form Cylindrical hole for secure clamping Double-sided with chipbreaker geometry ISO designation DNMG150404 Suitable for external and internal turning Compatibility defined by form, relief, tolerance, fastening, size and thickness FAQ What materials can this insert machine effectively? The DNMG150404 AH6225 insert is optimised for stainless steels and performs well in medium turning operations where a balance of edge sharpness and stability is required. Which geometry and holder standards apply to this plate? The insert follows the DNMG ISO geometry with a 55° included angle and 0° relief; compatibility with holders is based on the ISO form, plate thickness (4.76 mm) and size (15 mm). Is the insert reversible and how is it fixed? This is a double-sided indexable insert with a cylindrical hole for positive clamping; both sides provide usable cutting edges to extend service life. For which turning operations is this plate intended? Designed for external and internal turning, the plate suits medium machining tasks and applications requiring consistent chip control and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide AH6225 grade and a 55° rhombic geometry with a 0.4 mm corner radius for stable cutting performance in stainless steels; the ISO form ensures straightforward compatibility with standard holders. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150404 AH6225 ISO indexable turning insert by Tungaloy — PVD-coated carbide, 55° rhombic The DNMG150404 AH6225 is an ISO rhombic indexable insert for external and internal turning, optimised for machining stainless steels in medium cutting conditions. PVD-coated carbide AH6225 Designed for stainless steels 55° rhombic geometry with 0.4 mm radius Double-sided insert with cylindrical hole Consistent edge life and material adaptability The combination of a PVD-coated surface and a wear-resistant carbide substrate provides reliable performance when machining stainless steels under varying conditions. The AH6225 grade is formulated to balance a sharp cutting edge with stability, which translates into uniform surface finish and predictable tool change intervals. For process planners, this means fewer unplanned interruptions and a machining cycle that is easier to reproduce across shifts and machines. The coating also reduces built-up edge tendencies, helping to maintain dimensional accuracy over longer tool life. Geometry and system compatibility that simplify tooling The 55° rhombic geometry and a 0.4 mm corner radius deliver a versatile compromise between strength and form accuracy for both facing and profiling operations. As an ISO-standard insert, compatibility with holders is governed by shape, relief angle (0°), tolerance class, fastening, size and thickness; this standardisation ensures simple replacement and consistent clamping forces. The double-sided design with a cylindrical hole enables quick indexing and secure attachment, reducing downtime during regrips or insert changes and improving overall equipment efficiency. Practical benefits in shop-floor turning operations Designed for both external and internal turning, the insert supports applications where chip control and a reliable cutting edge are essential. Selecting an appropriate chipbreaker and using the AH6225 grade tailored to the workpiece stability will optimise chip formation and surface quality. The reversible insert format contributes to material savings and lowers per-edge tooling cost, while the robust substrate assists in resisting thermal and mechanical wear during medium-duty operations. For production environments seeking predictable throughput, the Tungaloy indexable insert offers a pragmatic mix of longevity and performance. For reliable turning of stainless steels with Tungaloy quality, contact Metav Werkzeuge for product availability and tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6825573 SKU: 6825573-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: DNMG150404 Insert size: 15 mm Thickness: 4.76 mm Relief angle: 0° Lead angle: 55° Corner radius: 0.4 mm Special features Material: carbide Coating: PVD Grade: AH6225 Double-sided chipbreaker Cylindrical hole Application: turning (external and internal) FAQ What materials is this insert intended for? The DNMG150404 AH6225 insert from Tungaloy is intended primarily for stainless steels and performs well in medium cutting conditions where a balance of sharpness and edge stability is required. Is the insert compatible with standard ISO holders? Yes, the ISO form of the DNMG150404 AH6225 means compatibility with ISO holders is determined by shape, relief angle, tolerance class, fastening, size and thickness so it can be used with matching ISO clamping systems. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius on the DNMG150404 AH6225 increases edge strength compared with smaller radii, improving resistance to chipping while still allowing good profile definition on typical turning tasks. Does the insert allow quick indexing and secure clamping? The double-sided design with a cylindrical hole provides secure fixation and enables quick indexing of the cutting edge, which supports reduced downtime during insert changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
DNMG 150404 AH6225 Tungaloy-Wendeplatte zum Drehen DNMG 150404 AH6225 vereint PVD-beschichtetes Hartmetall mit einem ausgelegten Einsatz für das Drehen von rostfreien Stählen und eignet sich für mittlere Schnittbedingungen und wechselnde Bearbeitungsumgebungen. ISO-genormt, kompatibel mit gängigen Haltern PVD-beschichtetes Hartmetall für längere Standzeit Ausgelegt auf rostfreie Stähle und mittlere Bearbeitung Rhombische Platte 15 mm mit Eckenradius 0,4 mm Doppelseitiger Spanbrecher, zylindrisches Loch für stabile Befestigung Hohe Produktivität bei der Bearbeitung von rostfreien Stählen Die DNMG 150404 Wendeplatte bietet durch die PVD-Beschichtung eine verbesserte Verschleißfestigkeit und eine stabile Schneidkante, was die Maschinenlaufzeit erhöht und Rüstzeiten reduziert. Für Fertigungsbetriebe bedeutet das weniger Werkzeugwechsel und konstante Oberflächengüte bei Serien- und Einzelteilen. Die Sorte AH6225 wurde speziell als universelle Lösung für rostfreie Stähle entwickelt; dadurch entsteht ein direkter wirtschaftlicher Nutzen durch reduzierte Werkzeugkosten pro Bauteil. Präzise Passform und Systemkompatibilität für sichere Prozesse Bei der Auswahl des Halters entscheidet die Form der Platte, der Freiwinkel, die Toleranzklasse, die Befestigungsart sowie Größe und Dicke über die Passgenauigkeit. Die Platte hat eine Plattengröße 15 mm, eine Plattendicke 4,76 mm und einen Eckenradius 0,4 mm, kombiniert mit einem Freiwinkel 0° und einem zylindrischen Loch zur Befestigung. Diese Merkmale sorgen für wiederholgenaue Positionierung im Systemaufbau aus ISO-Drehplatte, Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben. Hinweise zur Anwendung und kurze Begriffserklärungen Die typische Anwendung umfasst Außen- und Innendrehen; dabei ist der richtige Spanbrecher und die passende Sorte entsprechend Werkstoff, Bearbeitungsart und Maschinenstabilität zu wählen. Erklärung: Die Bezeichnung DNMG150404 setzt die Plattenform (rhombisch), die Größe (15) und den Eckenradius (0,4) zusammen. PVD steht für eine dünne, harte Beschichtungsschicht, die die Verschleißfestigkeit erhöht. Die Platte ist doppelseitig nutzbar, was die Wirtschaftlichkeit weiter steigert und den Werkzeugbestand reduziert. Zielgruppe, Einsatzszenarien und wirtschaftlicher Vorteil Kernzielgruppe sind Drehereien, Lohnfertiger und Inhouse-Werkstätten, die rostfreie Stähle zerspanen und Wert auf Prozesssicherheit und konstante Ergebnisse legen. Durch die universelle Sorte AH6225 lassen sich Losgrößen effizient bearbeiten, Rüst- und Stillstandszeiten minimieren und damit die Produktivität steigern. Für Anwender mit wechselnden Schnittbedingungen bietet die Platte eine robuste Kombination aus Schärfe und Stabilität, die zu gleichmäßigen Bauteilqualitäten führt. Für wirtschaftliche und prozesssichere Zerspanung rostfreier Stähle empfiehlt sich die DNMG 150404 AH6225 von Tungaloy; Anfragen zur Verfügbarkeit und spezifischen Einsatzparametern gerne an Metav Werkzeuge, eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Bezeichnung: DNMG150404 AH6225 Artikelnummer: 6890236 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU: 6890236-Tungaloy Fakten Eckenradius: 0,4 mm Winkel: 55° Plattendicke: 4,76 mm Plattengröße: 15 mm Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet (physikalische Gasphasenabscheidung) Sorte: AH6225 — universelle Sorte für rostfreie Stähle, scharfe und stabile Schneidkante Spanbrecher: doppelseitig Loch: mit Loch (zylindrisches Loch) Plattenform: rhombisch Freiwinkel: 0° Einsatz: Außen- und Innendrehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Welche Werkstoffe lassen sich mit der DNMG 150404 AH6225 bearbeiten? Die DNMG 150404 AH6225 von Tungaloy ist speziell für rostfreie Stähle ausgelegt; durch die universelle Sorte AH6225 können unterschiedliche Stähle mit mittleren Schnittbedingungen bearbeitet werden. Wie wirkt sich die PVD-Beschichtung auf die Standzeit aus? Die PVD-Beschichtung reduziert Verschleiß und trägt bei der DNMG 150404 AH6225 zu stabiler Schneidkante und längeren Werkzeugstandzeiten unter wechselnden Bedingungen bei. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die DNMG 150404 AH6225 ist für Außen- und Innendrehen vorgesehen; die Verwendung des passenden Halters und Spanbrechers gewährleistet optimale Ergebnisse. Welche Bedeutung hat der Eckenradius 0,4 mm für die Bearbeitung? Ein Eckenradius von 0,4 mm bietet eine gute Balance zwischen Kantenschärfe und Stabilität, geeignet für allgemeine bis mittlere Zerspanungsaufgaben mit der DNMG 150404 AH6225. Wie viele Schneidkanten stehen pro Platte zur Verfügung? Die DNMG 150404 AH6225 ist doppelseitig ausgeführt, wodurch mehrere Schneidkanten nutzbar sind und die Wirtschaftlichkeit steigt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade (AH6225), a 0.4 mm corner radius and ISO compatibility for stable, repeatable turning in mixed and stainless-steel applications; order directly via Metav Werkzeuge or consult the team for application matching. DNMG150404 AH6225 turning insert by Tungaloy — PVD carbide, 0.4 mm radius DNMG150404 AH6225 Tungaloy turning insert for ISO-conforming external and internal turning with a rhombic 55° geometry and double-sided chipbreaker suitable for varied machining conditions PVD-coated carbide grade AH6225 Universal for stainless steels and mixed materials 0.4 mm corner radius for stable cutting 55° rhombic shape with cylindrical hole Consistent geometry for ISO turning systems and predictable interchangeability The rhombic 55° geometry and ISO designation ensure straightforward integration into standard turning tool systems. With the ISO-series construction, compatibility with holders is determined by form, relief angle, tolerance class, mounting style, size and thickness; this delivers predictable clamping and repeatability across tool changes. The presence of a cylindrical mounting hole and standard dimensions supports rapid replacement and reduces setup variance, which contributes to steady component tolerances in serial production. AH6225 PVD-coated carbide: balance of edge sharpness and robustness The AH6225 grade is a PVD-coated carbide developed for universal performance on stainless steels, offering a sharp yet resilient cutting edge suited to medium-duty turning and fluctuating conditions. PVD coating enhances wear resistance and heat tolerance while the carbide substrate preserves edge stability, which together extend tool life and maintain surface finish. For engineers seeking an economical route to reliable productivity, this combination reduces unscheduled tool changes and stabilises process windows. Chip control and practical handling for everyday turning A double-sided chipbreaker design provides controllable chip formation in both external and internal turning operations, reducing the risk of entanglement and improving swarf evacuation. The insert’s 0.4 mm corner radius helps bridge the demands between finishing and light roughing: it moderates edge strength while allowing for improved contour fidelity. As part of an ISO insert system, the unit works with the appropriate outer holder, shim/clamp set and fastening screw, enabling efficient inventory management and rapid replacement in the workshop. For procurement or technical matching of the DNMG150404 AH6225 insert from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply options. Technical data Article number: 6947227 Manufacturer article number: 6947227 SKU: 6947227-Tungaloy Manufacturer SKU: TUN6947227 Model series: ISO turning indexable inserts Material: cemented carbide Facts Corner radius: 0.4 mm Thickness: 4.76 mm Insert size: 15 mm Included angle: 55° Clearance angle: 0° ISO designation: 150404 Special features Grade/coating: AH6225, PVD-coated Chipbreaker: double-sided Shape: rhombic Mounting: with cylindrical hole Typical application: external and internal turning FAQ What materials is this insert suitable for? The DNMG150404 AH6225 insert is a universal grade optimised for stainless steels and suitable for mixed-material turning where a balance of edge sharpness and stability is required. How does the AH6225 grade affect tool life and surface finish? The PVD-coated AH6225 grade enhances wear resistance and thermal stability while the carbide substrate maintains edge integrity, resulting in extended tool life and consistent surface quality under medium cutting conditions. Can this insert be used in standard ISO holders? Yes, the DNMG150404 follows ISO dimensions; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness, which ensures reliable clamping when the correct holder and shim/clamp set are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of a PVD-coated carbide grade and a rhombic 55° geometry to achieve stable cutting edges and consistent results in medium turning operations; order the insert via Metav Werkzeuge or consult our specialists for application support. DNMG 150404 AH6225 Tungaloy turning insert — PVD-coated carbide, rhombic 55° for turning A DNMG150404 AH6225 Tungaloy insert designed for ISO-series external and internal turning, offering a sharp yet robust cutting edge for variable conditions and principally intended for stainless-steel machining PVD-coated carbide for stainless steels Rhombic DNMG shape with 55° cutting angle Double-sided chipbreaker for versatile turning Cylindrical hole and 4.76 mm plate thickness Versatile cutting performance for medium turning operations The selected AH6225 grade is a PVD-coated carbide designed to combine a sharp cutting geometry with edge stability under changing conditions. In practice, this means consistent dimensional results when machining stainless steels, with the coating contributing to improved wear resistance and thermal stability. The insert’s configuration supports medium cutting depths and offers a balance between surface finish and tool life, so machining processes run more predictably and require fewer unscheduled tool changes. This reduces downtime and contributes to overall process efficiency. Predictable fit and secure clamping for process reliability Compatibility within the ISO-series is determined by form, relief angle, tolerance class, fastening method, size and thickness; the rhombic DNMG profile with a 55° cutting edge and a cylindrical hole ensures repeatable seating in standard external holders or boring bars. The insert’s 0° relief angle and 0.4 mm corner radius provide a compromise between strength and finish—small radii improve edge robustness while still permitting fine surface quality. Selecting the correct holder geometry and clamping kit is essential for reliable performance and repeatable tool offsets. Better chip control and uptime through engineered geometry A double-sided chipbreaker minimises uncontrolled chip formation across a range of feeds and materials, which eases swarf evacuation and protects the cutting edge. The 4.76 mm plate thickness increases rigidity compared with thinner grades, lowering vibration risk and helping to maintain tool life. Combined, these features support higher productive time between indexings and enable economical batch runs. The insert’s layout also permits two usable cutting edges per side, effectively extending service intervals before replacement is necessary. System considerations that simplify tool selection and set-up To assemble a reliable tooling system, pair the ISO insert with a compatible external holder or boring bar, a suitable underlay or clamping set, and correct fastening screws. Choosing the right chipbreaker and grade according to workpiece material and machining stability yields measurable improvements in processing speed and surface quality. Where changing operations or materials are expected, favour the universal grade and the double-sided breaker to maintain consistent results without frequent insert changes. For tailored advice on integrating this Tungaloy grade into production or to request supply through Metav Werkzeuge, please contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for an application-oriented consultation and prompt delivery. Technical Data Article number: 6947111 Manufacturer SKU: TUN6947111 Manufacturer article number: 6947111 Model series: ISO-turning inserts Material: Carbide Grade / Coating: AH6225 (PVD) Facts Cutting angle: 55° Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief (free) angle: 0° Hole: with cylindrical hole Special features Double-sided chipbreaker Rhombic DNMG plate form ISO designation: DNMG150404 Intended use: Turning (external and internal) System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The AH6225 grade is formulated for machining stainless steels; the DNMG150404 insert from Tungaloy performs well in medium turning conditions on these materials. How does the chipbreaker affect machining stability? The double-sided chipbreaker on this insert improves chip control across variable feeds, reducing swarf issues and contributing to steadier cutting conditions with fewer interruptions. Is the DNMG150404 compatible with standard ISO holders? Yes; the insert follows ISO series dimensions, but correct compatibility depends on matching form, clearance angle, tolerance class, fastening and thickness with the chosen holder. How many cutting edges are available per insert? This double-sided DNMG plate provides multiple usable edges; indexing extends service life and lowers the frequency of inserts replacement. What advantages does the PVD coating deliver? The PVD coating on the AH6225 grade increases wear resistance and thermal stability, resulting in improved edge life and more consistent surface quality during medium turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of robust PVD-coated carbide, 55° rhombic geometry and secure clamping for reliable turning of stainless steels; ideal where interrupted cuts and higher breakout risk occur. Order the DNMG150404 AH6235 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150404 AH6235 – Indexable turning insert for stainless steel, 55° rhombic geometry (Tungaloy) The DNMG150404 AH6235 is a PVD-coated carbide indexable insert for turning operations, designed for machining stainless steels and interrupted cuts with a focus on stable chip control and tool life. *PVD-coated carbide AH6235 grade *Optimised for stainless steel and interrupted cuts *Rhombic 55° geometry with 0.4 mm nose radius Reliable performance for demanding stainless-steel turning The combination of a PVD-coated carbide substrate and the tougher AH6235 grade delivers consistent performance when machining stainless steels or other adhesion-prone alloys. The insert’s rhombic 55° geometry and 0.4 mm nose radius are designed to balance cutting edge strength and profile accuracy, helping to maintain dimensional stability during external and internal turning. For shops seeking predictable tool life under interrupted cutting conditions, this insert provides a technically sound choice that emphasises process stability and repeatability. Secure seating and ISO compatibility for flexible tool set-up Compatibility with a wide range of ISO holders is determined by geometry, clearance angle, tolerance class, fixing method, size and thickness; the insert’s 0° clearance (relief angle) and cylindrical hole allow secure clamping in standard toolholders and boring bars. This simplifies tool changeover in mixed-production environments and reduces set-up time. The standardised ISO designation ensures easy identification in tooling systems and supports efficient inventory management for production planning. Chip control and edge security reduce scrap and downtime Equipped with a double-sided chipbreaker, the insert improves chip formation and evacuation during variable cutting conditions, which is particularly relevant when machining stainless steels that tend to produce long, gummy chips. The tougher grade and PVD coating help resist flank and crater wear while providing enhanced resistance to edge chipping in interrupted cuts. The result is fewer unscheduled tool changes, lower scrap rates and more consistent surface finishes on turned components. Practical selection advice and process considerations When specifying an insert of this type, select the chipbreaker and grade to match the material, machining method and machine stability; a tougher grade such as AH6235 is preferable for interrupted cuts and workpieces with higher breakout risk. Ensure holder geometry matches the DNMG150404 form and that clamping hardware conforms to the insert’s dimensions (15 mm inscribed circle, 4.76 mm thickness). Monitoring cutting parameters and adjusting feeds and speeds conservatively at the start helps confirm optimal settings without overloading the cutting edge. For robust turning of stainless steels with proven chip control, contact Metav Werkzeuge to order the DNMG150404 AH6235 insert or for technical guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6886662 SKU: 6886662-Tungaloy Manufacturer article number: TUN6886662 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Inscribed circle: 15 mm Thickness: 4.76 mm Nose radius: 0.4 mm Geometry angle: 55° Clearance (relief) angle: 0° Hole: with cylindrical hole Special features PVD-coated carbide grade AH6235 Rhombic plate form, double-sided Double-sided chipbreaker Designed for stainless steels and interrupted cuts ISO-standardised turning insert Compatibility depends on holder form, relief angle, tolerance class and fixing FAQ What materials is this insert best suited for? The DNMG150404 AH6235 insert is intended primarily for stainless steels and other materials where a tougher grade and good chip control are required; the AH6235 PVD coating supports adhesion resistance in such applications. Can the DNMG150404 be used for internal turning as well as external turning? Yes, the DNMG150404 indexable insert is suitable for both external and internal turning when paired with a compatible holder; confirm holder geometry and clamping for secure seating and correct relief. How does the AH6235 grade affect tool life in interrupted cuts? The AH6235 grade provides enhanced toughness compared with standard grades, which improves resistance to chipping during interrupted cutting and helps maintain tool life under variable engagement. Which chipbreaker should be selected for mixed production? For mixed production including stainless steels and interrupted cuts, the supplied double-sided chipbreaker offers a versatile solution; choose the chipbreaker variant that matches the feed range and surface finish requirements. What should be checked before installing this insert in a holder? Verify holder compatibility with the DNMG150404 form, the 55° rhombic geometry, 0° clearance and the 15 mm inscribed circle; ensure correct clamping hardware and tolerance class for secure attachment. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6235 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade tailored for stainless steels and interrupted cuts together with the stable rhombic DNMG geometry for consistent chip control and long tool life; order directly via Metav Werkzeuge or contact the technical team for matching holder and clamping options. DNMG150404 AH6235 Tungaloy turning insert for turning The DNMG150404 AH6235 Tungaloy turning insert is an ISO‑standard rhombic insert designed for external and internal turning, optimised for stainless steels and applications prone to built-up edge or intermittent cuts. ISO DNMG geometry, rhombic 55° approach angle PVD-coated carbide grade AH6235 Optimised for stainless steels and interrupted cuts Double-sided chipbreaker, cylindrical hole Reliable performance for demanding turning operations The DNMG‑style insert combines a 55° approach angle with a rhombic profile to deliver stable cutting in both external and internal turning. The PVD-coated carbide substrate provides a balance between toughness and wear resistance, which is particularly beneficial when machining stainless steels where work-hardening and edge breakdown are common. This geometry and coating pairing reduces the risk of premature edge failure and supports predictable tool life, meaning longer uninterrupted production runs and fewer insert changes. Clear compatibility and secure clamping reduce setup time ISO‑standardisation ensures straightforward selection of a matching holder: form, free angle, tolerance class, fixing method, size and thickness must be coordinated. The insert’s cylindrical hole and standard hole style facilitate positive clamping and repeatable seating in compatible toolholders, reducing the chance of vibration-induced wear. Specifying the correct holder and clamping set alongside the insert minimises deflection and improves surface finish, translating technical fit into measurable productivity gains. Tailored grade and chip control for stainless steels The AH6235 grade is a tougher PVD-coated carbide developed to manage the ductility and work-hardening tendencies of stainless steels. Its double-sided chipbreaker helps to fragment and evacuate chips even under interrupted cutting conditions, lowering the risk of built-up edge and improving dimensional stability. For operators less familiar with metallurgical terms: the coating increases surface hardness and thermal resistance, while the core carbide provides the mechanical strength to withstand shock and vibration. Practical selection and application advice When choosing this insert, match the 0° clearance and the 0.4 mm corner radius to the component’s tolerance and edge strength requirements; a larger radius gives more edge strength at the cost of slightly higher cutting forces, while a smaller radius favours finer finishes. The 4.76 mm thickness and 15 mm size are typical dimensions that affect rigidity—thicker and larger inserts provide higher stability for interrupted cuts. For efficient implementation, select a chipbreaker and grade aligned with material, feed rate and stability rather than relying solely on cutting speed charts. For tailored advice on holder compatibility or to request sample inserts, contact Metav Werkzeuge for expert assistance and rapid supply coordination Technical data Article number: 6903372 SKU (manufacturer): TUN6903372 SKU: 6903372-Tungaloy Facts ISO designation: DNMG150404 Grade/coating: AH6235, PVD-coated carbide Corner radius: 0.4 mm Plate thickness: 4.76 mm Size: 15 mm Approach angle: 55° Clearance angle: 0° Hole: with hole (cylindrical) Special features Insert form: rhombic (DNMG) Chipbreaker: double-sided Typical application: external and internal turning Model series: ISO turning inserts Material: carbide FAQ What materials is this insert best suited for? The DNMG150404 AH6235 Tungaloy turning insert is optimised for stainless steels and performs well under interrupted cuts and applications with increased breakout risk. Can the insert be used for internal turning as well as external turning? Yes, the rhombic DNMG geometry and standard ISO dimensions allow the insert to be used for both external and internal turning when paired with an appropriate holder. How does the AH6235 grade help with interrupted cuts? AH6235 is a tougher, PVD-coated carbide grade that provides improved toughness and edge stability, reducing the likelihood of chipping during interrupted operations. Which features support reliable chip control? The double-sided chipbreaker and PVD coating together aid in fragmenting and evacuating chips, improving process stability and surface quality. Is holder compatibility standardised for this insert? Compatibility depends on form, free angle, tolerance class, fixing method, size and thickness; selecting a matching ISO DNMG holder and correct clamping kit ensures secure seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6235 carbide, robust chip control and the standard ISO DNMG shape for reliable turning performance; order directly via Metav Werkzeuge or request advice from our consultants for holder compatibility and process optimisation. DNMG 150404 AH6235 — Turning insert (DNMG) by Tungaloy, PVD-coated carbide, 55° rhombic A DNMG 150404 AH6235 turning insert designed for external and internal turning, optimised for rostfreiem and difficult-to-machine steels and for interrupted cuts. PVD-coated AH6235 carbide grade Optimised for rostfreiem steel machining Rhombic DNMG 55° geometry, 0° clearance Double-sided chipbreaker, cylindrical hole Reliable grade and coating for demanding turning The AH6235 grade combines a tough, PVD-coated carbide substrate with a composition tuned for reduced chipping in unstable conditions. This PVD-coated surface increases edge life under thermal load and improves resistance to notch wear when machining rostfreiem steel or when cuts are interrupted. As a consequence, tool change frequency is reduced and cycle times become more predictable. The described grade is particularly suitable when the process demands a balance between edge stability and consistent material removal rather than purely maximum hardness. Geometry and fit that ensure predictable results The DNMG 150404 form provides a 55° cutting angle with a rhombic profile and a 0° clearance, which translates into a versatile geometry for facing and profile turning while maintaining positive engagement in confined conditions. The insert’s cylindrical locating hole and ISO-conformant dimensions ensure compatibility with standard indexable holders; correct matching depends on holder form, relief angle, tolerance class, clamp method, size and thickness. Where assembly and repeatability are priorities, the standard ISO interface simplifies tool management and reduces setup time in serial production. Process benefits from chip control and double-sided use Equipped with a double-sided chipbreaker, the insert promotes short, controlled chips across a range of feeds and depths, improving evacuation and reducing the risk of workpiece damage. The 0.4 mm corner radius contributes to edge robustness and a uniform surface finish during finishing passes, while the double-sided design extends effective cutting edges per insert, delivering cost-efficiency in production. For interrupted cuts or operations with elevated breakout risk, the combination of grade and chip geometry supports a more stable cutting process and helps maintain consistent surface quality with fewer interruptions. For specific advice on integrating Tungaloy AH6235 inserts into existing tool systems, or to confirm holder compatibility for DNMG 150404 components, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and order details Technical data Article number: 6892174 Manufacturer SKU: TUN6892174 Label: DNMG150404 AH6235 Tungaloy insert Manufacturer: Tungaloy Core specifications Size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting geometry angle: 55° Design & features Rhombic insert shape (DNMG) Cylindrical locating hole Double-sided chipbreaker PVD-coated carbide grade AH6235 ISO-compliant turning insert for external and internal turning FAQ What materials is this insert best suited for? The Tungaloy DNMG 150404 AH6235 insert is formulated for rostfreiem steel and other hard-to-machine steels, offering improved resistance to chipping and thermal wear. Can the insert be used for interrupted cuts? Yes, the AH6235 grade and robust corner radius make this indexable insert suitable for interrupted cuts and operations with elevated breakout risk. How does the DNMG shape affect holder compatibility? Compatibility depends on holder form, relief angle, tolerance class, clamp method, size and thickness; the ISO DNMG form simplifies selection for standard indexable holders. How many times can the insert be indexed? The double-sided construction provides multiple cutting edges per insert; actual indexable edges depend on regrinding and inspection cycles for the Tungaloy DNMG 150404 AH6235. What does the PVD coating deliver in practical terms? The PVD-coated surface on the AH6235 grade enhances edge life under heat and reduces notch wear, contributing to longer uninterrupted machining periods. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6235 Wendeplatten - Tungaloy
Take advantage of the proven combination of a PVD-coated AH6235 grade for improved wear resistance, a precise 0.4 mm nose radius for reliable finishing, and ISO compatibility for straightforward tool integration; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 150404 AH6235 turning insert — PVD-coated carbide, 0.4 mm nose radius, 55° cutting edge (Tungaloy) DNMG150404 AH6235 is a rhombic turning insert designed for external and internal turning where interrupted cuts or stainless steels require a tougher grade and predictable edge stability DNMG rhombic insert, ISO 150404 PVD-coated carbide AH6235 for stainless steels 0.4 mm nose radius, 55° cutting edge Double-sided chipbreaker, cylindrical hole Consistent cutting performance for demanding turning The insert combines a PVD coating with a tough carbide grade (AH6235) to withstand the thermal and mechanical loads typical of machining stainless steel and other challenging materials. This composition increases resistance to built-up edge and reduces the risk of corner fracture in interrupted cuts, resulting in more predictable tool life and fewer unplanned tool changes. The PVD layer also improves surface finish by lowering friction at the cutting zone. Better chip control and surface quality with a double-sided chipbreaker The double-sided chipbreaker is engineered to shape chips consistently across a range of cutting parameters, which reduces the likelihood of entanglement and eases evacuation from the work area. Improved chip control leads directly to fewer stoppages and a more uniform surface texture on the workpiece. For operators seeking reliable finishing in profile and groove turning, this insert supports stable cutting conditions and a clean machining environment. Easy integration into ISO tooling systems and repeatable setup Designed to the ISO designation, the insert features a rhombic geometry, cylindrical hole, 4.76 mm thickness and a 0.4 mm nose radius, with a 55° cutting edge angle and a 0° clearance angle. These standardised dimensions enable straightforward replacement in compatible holders and predictable seating and clamping behaviour. Compatibility with a holder is determined by insert form, relief angle, tolerance class, fastening type, size and thickness, which helps engineering teams standardise tooling across machines and reduce setup time. For tailored recommendations on cutting data, holder compatibility or fast procurement of Tungaloy DNMG150404 AH6235 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or phone +49 2822 7131930 for expert advice and immediate supply. Technical Data Article number: 6886660 SKU: 6886660-Tungaloy Manufacturer SKU: TUN6886660 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: DNMG150404 Nose radius: 0.4 mm Insert thickness: 4.76 mm Insert size: 15 mm Clearance angle: 0° Cutting edge angle: 55° Special features Grade: AH6235 Coating: PVD Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) Suitable for: stainless steel and interrupted cuts Compatibility: ISO-standard holders FAQ What materials are best machined with this insert? The AH6235 grade and PVD coating make the DNMG150404 insert particularly suitable for machining stainless steel and other materials prone to work-hardening or with interrupted cuts. How does the AH6235 grade help with interrupted cuts? AH6235 is a tougher, PVD-coated carbide grade that reduces chipping risk during interrupted cutting, providing more reliable edge stability and longer in-process life for the insert. What does the 0.4 mm nose radius influence on the finished part? A 0.4 mm nose radius delivers a balance between edge strength and fine surface finish, allowing improved corner strength without compromising the geometric accuracy of profiles. Is the insert compatible with standard ISO holders? The insert follows the ISO designation DNMG150404 and is compatible with holders that match the insert form, relief angle, tolerance class, fastening method, size and thickness. Can the chipbreaker be used for general finishing operations? Yes, the double-sided chipbreaker offers consistent chip control, which supports both roughing and finishing operations while helping to maintain surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade, proven compatibility with ISO holders and a robust chipbreaker for stable production results; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 150404 AH6235 DNMG turning insert by Tungaloy — PVD-coated carbide, for turning DNMG150404 AH6235 is a rhombic, ISO-standard indexable insert designed for turning, offering a balance of wear resistance and toughness for demanding operations. PVD-coated carbide grade AH6235 Optimised for rostfreier Stahl and interrupted cuts ISO DNMG 150404 rhombic insert, 55° geometry Double-sided chipbreaker with 0.4 mm corner radius Reliable cutting performance for demanding turning work The PVD coating combined with a tough carbide substrate in grade AH6235 provides enhanced resistance to built-up edge and microchipping in challenging materials such as rostfreier Stahl. This composition is specifically selected for applications with interrupted cuts and elevated breakout risk, where a more ductile grade reduces edge failure and prolongs tool life. The result is improved process stability and fewer insert changes during production, supporting predictable cycle times and consistent component quality. Precision geometry for straightforward integration and repeatability With its 55° geometry and rhombic form, the insert fits a broad range of ISO-compliant external and internal turning holders. The 0° clearance angle and 0.4 mm corner radius are well suited for general finishing and light to medium roughing passes where controlled edge strength is required. The cylindrical hole and 4.76 mm plate thickness ensure reliable clamping and repeatable seating; the double-sided design allows economical indexation, reducing tooling cost per part while maintaining consistent cutting geometry across repositions. Productivity improvements and practical application guidance The integrated double-sided chipbreaker guides swarf formation and evacuation to reduce edge loading and stabilise cutting forces, which can help extend insert life and reduce heat accumulation on the cutting edge. Choosing this insert grade and chipbreaker combination supports a wide spectrum of turning tasks when matched to machine rigidity and workpiece stability. For best results, pair the insert with a suitable holder and select feeds and depths that reflect the component tolerance and surface finish targets, thereby achieving a balance between productivity and component quality. For specific application advice or to procure the DNMG150404 AH6235 indexable insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and availability. Technical Data Article number: 6881164 Manufacturer SKU: TUN6881164 SKU: 6881164-Tungaloy Model series: ISO turning inserts Facts ISO designation: 150404 Insert designation: DNMG150404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Geometry angle: 55° Clearance angle: 0° Size: 15 mm Special features Grade/coating: AH6235, PVD-coated carbide Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Material: carbide FAQ What materials is this insert suitable for? The DNMG150404 AH6235 insert is formulated for demanding use on rostfreier Stahl and suited to interrupted cuts where edge toughness is essential. How does the AH6235 grade benefit production? AH6235 offers a tougher microstructure with a PVD finish that reduces the risk of chipping and improves life in applications with variable cutting conditions. Is this insert compatible with standard ISO DNMG holders? Yes, the DNMG150404 designation and the cylindrical hole ensure compatibility with holders that accept ISO DNMG inserts, subject to holder form, size and tolerance class. Can the insert be indexed for additional life? The insert is double-sided, allowing indexation to a fresh cutting edge to extend usable life and lower cost per edge. What should be checked when selecting a holder for this insert? Confirm holder geometry, free angle, clamping method, size and thickness compatibility to ensure correct seating and repeatable cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH6235 Wendeplatten - Tungaloy
Benefit from the PVD-coated carbide AH6235 and the ISO rhombic DNMG150404 geometry for consistent performance in turning operations, especially when machining rostfreier Stahl or handling interrupted cuts; order directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150404 AH6235 ISO rhombic turning insert by Tungaloy — PVD-coated carbide, 55° approach angle DNMG150404 AH6235 is a PVD-coated carbide ISO indexable insert designed for general turning operations and optimised for rostfreier Stahl and interrupted cutting conditions ISO rhombic DNMG format, 55° approach angle PVD-coated carbide grade AH6235 Optimised for rostfreier Stahl and interrupted cuts Double-sided chipbreaker with cylindrical hole Consistent performance on rostfreier Stahl and difficult cuts The insert's PVD-coated carbide composition and AH6235 cutting grade deliver a balance of toughness and wear resistance that suits the demands of rostfreier Stahl and other abrasive or sticky alloys. The selected grade reduces the risk of edge chipping during starts, stops and interrupted cuts while maintaining a competitive tool life. Specified as an ISO indexable plate, the geometry ensures repeatable results when paired with a compatible external holder; this contributes to predictable cycle times and fewer tool changes, enhancing overall production efficiency. Stable geometry for accurate set-up and repeatability With a 55° approach angle and 0° clearance, the rhombic DNMG form offers a reliable datum for setting cutting parameters and controlling engagement forces. The 0.4 mm corner radius supports a compromise between edge strength and surface finish, enabling both heavier roughing cuts and fine finishing with the same insert family. The presence of a cylindrical locating hole simplifies retention in many holder systems and ensures positional accuracy, so operators can expect consistent repeatability across batches and shifts. Designed for interrupted cuts and breakout resistance The AH6235 grade was formulated for applications where breakout risk is elevated; its tougher substrate and PVD surface treatment improve resistance to thermal and mechanical shock. The double-sided chipbreaker provides controlled chip formation across both cutting edges, helping to avoid chip build-up and potential workpiece damage. For operations that alternate between continuous and interrupted cutting, this insert reduces scrap rates and supports a steadier process window, which in turn lowers rework and increases throughput. Integration into the workshop and tooling systems As an ISO-standardised turning plate, the DNMG150404 integrates into established toolholders, clamping sets and indexable systems without the need for proprietary adapters. The plate thickness of 4.76 mm and the nominal size of 15 follow ISO conventions, aiding spare-part management and standardisation on the shop floor. Where process documentation or parameter transfer is required, the insert’s stable cutting behaviour simplifies the derivation of cutting data and reduces the learning curve for new operators or alternative shifts. For reliable turning performance with the AH6235 grade, contact Metav Werkzeuge to confirm holder compatibility and stock availability — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6882367 Manufacturer SKU: TUN6882367 Item SKU: 6882367-Tungaloy Brand: Tungaloy Designation: DNMG150404 Core data Approach angle: 55° Clearance angle: 0° Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 15 (ISO designation 150404) Special features PVD-coated carbide, grade AH6235 ISO rhombic indexable insert (DNMG) Double-sided chipbreaker Cylindrical locating hole Application: Turning Suited for rostfreier Stahl and interrupted cuts FAQ What materials is this insert suitable for? The DNMG150404 AH6235 insert is formulated for rostfreier Stahl and other alloys where toughness is required; the AH6235 grade balances wear resistance and breakage resistance. How does the AH6235 grade perform in interrupted cutting? AH6235 offers increased resistance to edge breakage in interrupted cuts, so the DNMG150404 indexable plate maintains cutting integrity under shock-prone conditions. Is the insert compatible with standard ISO holders? Yes, the DNMG150404 follows ISO dimensions and locates with a cylindrical hole, making it compatible with many standard external holders and clamping sets. How many cutting edges are available per insert? The insert is double-sided with a chipbreaker on both sides, providing multiple indexable edges per plate as per DNMG geometry. Which attributes improve surface finish with this geometry? The 55° approach angle combined with a 0.4 mm corner radius allows a controlled cut engagement that supports improved surface quality while maintaining edge strength. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150404 AH8005 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8005 grade and the ISO DNMG150404 geometry to achieve stable, wear-resistant turning of heat‑resistant alloys and hard materials; the double‑sided chipbreaker and cylindrical hole ensure predictable chip control and secure clamping. Order the inserts or request guidance for holder compatibility from Metav Werkzeuge for efficient integration into production. DNMG150404 AH8005 Tungaloy indexable insert for turning — PVD-coated carbide, 0° clearance The DNMG150404 AH8005 is an ISO‑standard indexable insert engineered for external and internal turning, combining a rhombic form with a 55° cutting angle for versatile machining of heat‑resistant and hard materials. DNMG150404 geometry for versatile turning PVD-coated carbide AH8005 for heat-resistant alloys Double-sided chipbreaker for stable material removal Cylindrical hole for secure clamping and repeatability Increased productivity through optimised edge geometry and coating The combination of the AH8005 PVD coating and a carbide substrate delivers enhanced wear resistance when machining demanding materials. The protective PVD layer reduces adhesive and abrasive wear, which results in more consistent cutting forces and longer in‑service intervals. For production environments this means fewer index changes and reduced downtime, translating into measurable gains in throughput and tool‑cost efficiency. The rhombic shape, paired with a 55° approach, enables flexible toolpath strategies for both external and internal turning operations while maintaining a favourable balance between strength and accessibility. Predictable chip control and secure fixation for repeatable machining A double‑sided chipbreaker design promotes controlled chip formation under stable cutting conditions, aiding evacuation and surface integrity. The insert’s cylindrical hole ensures precise seating and repeatable clamping when used with compatible holders and clamping sets; compatibility depends on form, clearance angle, tolerance class, fixation method, size and thickness. Specifying the correct chipbreaker and grade for the chosen material and machining stability reduces machining variability and supports consistent part quality in batch production. Material suitability explained for practical decisions The AH8005 grade is a wear‑resistant PVD‑coated cemented carbide optimised for heat‑resistant alloys and other hard materials when process stability is adequate. In plain terms: harder workpieces and elevated cutting temperatures benefit from the coating’s thermal and chemical resistance, while the carbide core maintains edge‑holding capability. For operations demanding fine surface finish and dimensional conformity, this combination helps maintain geometry over longer intervals, lowering rework rates and enhancing first‑pass yield. Seamless integration into workshop workflows Using ISO‑conforming inserts simplifies logistics and tool management across multi‑machine shops. The DNMG150404 form integrates with a wide range of external holders and boring bars, enabling rapid replacement and minimal set‑up time. Keeping a stock of correctly specified inserts and replacement screws reduces lead times for scheduled maintenance. When paired with the right holder and cutting parameters, the insert supports reproducible cycle times and predictable tool life, making process planning and cost‑per‑part calculations more reliable. Contact Metav Werkzeuge for tailored holder selection and application support on Tungaloy AH8005 inserts; technical advice and orders are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6741651 SKU: 6741651-Tungaloy Manufacturer SKU: TUN6741651 Brand: Tungaloy Material: Carbide Coating / Grade: AH8005 (PVD) Series: ISO turning indexable inserts Dimensions & core data ISO designation: 150404 Insert size: 15 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting/approach angle: 55° Hole: with cylindrical hole Features & suitability Rhombic plate form Double-sided chipbreaker Intended application: turning Suitable for heat‑resistant alloys and hard materials System components: insert, compatible external holder or boring bar, support/clamp set, replacement screws FAQ What materials is this insert best suited for? The DNMG150404 AH8005 insert is designed primarily for heat‑resistant alloys and other hard materials where the PVD coating and carbide substrate provide improved wear resistance. How does the AH8005 coating affect tool life? The AH8005 (PVD) coating reduces adhesive and abrasive wear at elevated temperatures, which typically extends effective edge life under stable cutting conditions. Which holders are compatible with this ISO geometry? Compatibility depends on holder form, clearance angle, tolerance class, fixation method, size and thickness; the DNMG150404 geometry fits standard ISO DNMG holders when these parameters match. Can the insert be used for internal turning? Yes; the rhombic form and 55° cutting angle make the insert suitable for both external and internal turning applications with the appropriate boring bar or internal holder. What is the purpose of the cylindrical hole? The cylindrical hole provides secure and repeatable clamping, improving positional accuracy and simplifying re‑assembly during index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com