SDMT 1204AF AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, PVD-coated AH120 carbide and a robust square format for reliable milling performance; order the insert directly via Metav Werkzeuge or consult our specialists for suitability and delivery. SDMT 1204AF AH120 indexable insert for milling — Tungaloy SDMT1204AF AH120 Tungaloy insert for Tungaloy milling systems, engineered for face, shoulder, slot, high-feed and contour milling where a sharp edge and consistent process security are required. PVD-coated carbide AH120 for high wear resistance Square 12 mm format with 90° cutting angle Cylindrical hole with one-sided 40°–60° countersink Zero corner radius, single-sided chipbreaker Reliable cutting performance through PVD-coated carbide The PVD-coated AH120 grade is a wear- and chipping-resistant carbide formulation developed for demanding milling tasks. With a PVD coating, the cutting edge resists abrasion and maintains sharpness over longer cycles, which reduces tool-change frequency and contributes to consistent component quality. This results in improved process stability and predictable tool life, particularly in interrupted cuts and mixed-material production where edge integrity is critical. Geometry optimised for versatile milling applications The square plate in 12 mm size with a 90° cutting angle and a 15° relief angle provides a sturdy geometry for face and shoulder operations. The plate thickness of 4.76 mm and a corner radius of 0 mm ensure a robust edge for heavy engagement and precise corner finishing. These dimensional choices support both moderate and higher feed milling families, delivering reliable metal removal rates while preserving dimensional accuracy on the workpiece. Secure mounting and controlled chip formation A cylindrical hole with a one-sided 40°–60° countersink enables secure clamping and consistent seating in compatible cutter bodies; insert seat, geometry and cutter body must match to guarantee correct fixation. The single-sided chipbreaker design promotes stable chip formation and evacuation in a wide range of steels and non-ferrous alloys, reducing recut and improving surface quality. Clear system compatibility reduces setup time and lowers the risk of incorrect assembly. Practical productivity advantages on the shop floor Intended for milling, this insert supports plan, shoulder, slot, high-feed and contour operations depending on the chosen cutter family. The combination of a sharp, wear-resistant edge and compact geometry helps maintain cycle-time targets and lowers overall tooling cost through extended service intervals. The insert is suitable for job shops and production environments that prioritise repeatable results and minimal process interruptions. Contact Metav Werkzeuge for availability of Tungaloy SDMT1204AF AH120 inserts, personalised application advice and order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6806250 SKU: 6806250-Tungaloy Manufacturer SKU: TUN6806250 Model series: Fräswendeschneidplatten Material: Hartmetall Core data Size: 12 mm Thickness: 4.76 mm Cutting angle: 90° Relief angle: 15° Corner radius: 0 mm ISO designation: 1204AF Special features PVD-coated carbide (AH120) Square plate, single-sided chipbreaker Cylindrical hole with one-sided 40°–60° countersink Suitable for milling; system compatibility required Insert seat, geometry and cutter body must match FAQ What applications is this insert suitable for? The SDMT1204AF AH120 insert is designed for face, shoulder, slot, high-feed and contour milling when used in the appropriate Tungaloy milling cutter family. How does the AH120 coating improve performance? The PVD-coated AH120 carbide extends edge life and reduces wear, so the SDMT1204AF AH120 Tungaloy insert maintains a sharper edge for longer under milling conditions. Is the insert compatible with non-Tungaloy cutter bodies? Compatibility requires matching the insert seat, geometry and cutter body; the SDMT1204AF AH120 insert should be used in systems that conform to the same seat and clamping standards. What are the mounting details for secure clamping? The insert features a cylindrical hole with a one-sided 40°–60° countersink for stable clamping when paired with the correct clamp screw and possibly a shim. Can this insert be used for high-feed milling? When combined with a suitable high-feed cutter family, the geometry and robust carbide grade of the SDMT1204AF AH120 insert can support high-feed strategies and productive metal removal. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204AF AH140 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade (AH140) for extended toollife, a sharp, process-secure cutting edge and a standardized seat geometry that reduces setup time; order directly via Metav Werkzeuge or consult our specialists for application matching. SDMT 1204AF AH140 milling insert – Tungaloy square insert for general milling with cylindrical hole and single-sided chipbreaker SDMT1204AF AH140 Tungaloy-Wendeplatte is a square, indexable milling insert engineered for face, shoulder, slot and high-feed milling where a sharp cutting edge and process reliability are required. PVD-coated grade AH140 for wear resistance Square 12 mm format with 90° cutting angle Cylindrical hole with one-side countersink (40°–60°) Single-sided chipbreaker for stable chip control Maximise machining consistency with a wear-resistant PVD grade The SDMT1204AF AH140 Tungaloy insert combines a PVD-coated carbide substrate with a geometry optimised for repeatable performance in a range of milling tasks. The AH140 grade is formulated to resist both wear and chipping, which translates into longer indexed cycles and fewer tool changes. For workshops aiming to reduce non-productive time, this grade delivers predictable flank wear behaviour and maintains a sharp cutting edge under typical milling forces, supporting consistent surface finish and dimensional accuracy. Secure clamping and versatile mounting reduce downtime Designed with a cylindrical hole plus single-side countersink (40°–60°), the insert ensures secure seating in compatible cutter bodies and consistent seat repeatability. The square 12 mm geometry and 90° cutting angle allow straightforward replacement and flexibility across shoulder and face milling operations. Because seat, geometry and cutter body must match, using the correct holder family is essential for achieving the expected clamping force and avoiding abnormal vibration — a simple precaution that improves process stability and tool life. Practical benefits of the geometry and chip control A single-sided chipbreaker provides controlled chip formation for a wide range of chip loads, improving evacuation and reducing risk of re-cutting. With a 15° relief angle and zero corner radius, the insert is suited to applications requiring a defined edge for accurate shoulders and contours. The combination of geometry and PVD surface treatment helps maintain cutting performance across mixed material batches and varying feed conditions, supporting repeatable productivity and smoother downstream processes. Application guidance and system compatibility This insert is intended for use in Tungaloy milling systems and similar holder families where the insert seat and clamping method match the SDMT series specification. Typical applications include face, shoulder, slot, high-feed and contour milling depending on the assigned cutter body. Selection of cutting parameters should reflect the PVD-coated carbide nature of the grade and the workpiece material; conservative feeds at first cut help verify process behaviour and extend wear life. For specialised substrates, confirm suitability with process trials or consult technical documentation. Contact Metav Werkzeuge for application advice and to request the SDMT 1204AF AH140 insert for secure, long-life milling performance – our specialists will assist with cutter family matching and process optimisation Technical data Article number: 6817236 Manufacturer SKU: TUN6817236 SKU: 6817236-Tungaloy Model series: Fräswendeschneidplatten Designation: SDMT1204AF AH140 Tungaloy-Wendeplatte Core specifications Shape: square, 12 mm Thickness: 4.76 mm Cutting angle: 90° Relief angle: 15° Corner radius: 0 mm Special features Material: carbide (Hartmetall) Coating/grade: AH140 (PVD-coated) Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: milling (Fräsen) FAQ What milling operations suit this insert best? The SDMT1204AF AH140 insert is designed primarily for face, shoulder, slot, high-feed and contour milling when used in compatible Tungaloy milling systems. Is the AH140 grade suitable for stainless or alloyed steels? The PVD-coated AH140 grade offers good resistance to wear and chipping and is suitable for a broad range of steels and alloyed materials; machining parameters should be adjusted to the specific workpiece. How does the cylindrical hole with countersink affect mounting? The cylindrical hole plus one-sided countersink (40°–60°) gives secure clamping and repeatable seating in appropriately designed cutter bodies; matching seat geometry is essential for process stability. Can this insert be used for high-feed milling? Yes, depending on the assigned cutter family and correct setup, the square 12 mm format with 90° angle supports high-feed and productive milling strategies. What chip control can be expected from the single-sided chipbreaker? The single-sided chipbreaker promotes consistent chip formation and evacuation under typical milling feeds, helping to reduce re-cutting and support stable surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204AF AH140 Wendeplatten - Tungaloy
Consistent milling performance is delivered by the combination of PVD-coated carbide in the AH140 grade and the precise, square 12 mm form with a secure clamping hole; this yields reliable edge life and predictable process security. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SDMT 1204AF AH140 indexable insert for milling — Tungaloy The SDMT1204AF AH140 is a PVD-coated carbide indexable insert for general milling, designed for face, shoulder, slot, high-feed and contour operations within compatible Tungaloy milling systems. PVD-coated carbide grade AH140 Square 12 mm size, 4.76 mm thickness 15° relief angle, 90° included angle Cylindrical hole with 40°–60° countersink Durable cutting edges that extend tool life The PVD-coated hardmetal composition in AH140 delivers enhanced wear and chipping resistance, resulting in longer cutting-edge life under intermittent and continuous cutting conditions. This PVD coating reduces adhesion at the rake face and supports higher cutting speeds where applicable, which translates into fewer insert changes and more consistent cycle times. For production environments the result is measurable: improved uptime and reduced handling frequency per batch. Secure seating and predictable clamping for process stability Designed as a square, 12 mm insert with a cylindrical hole and single-side countersink, the geometry ensures positive mechanical location and secure clamping in matched Tungaloy cutter bodies. The listed seat geometry and insert thickness of 4.76 mm combined with a 15° relief angle and 90° included angle provide a stable cutting interface that minimises micro-vibration and promotes repeatable component accuracy. Clarifying compatibility at procurement reduces setup time and prevents mismatched assemblies. Controlled chips and consistent surface quality The single-sided chipbreaker is engineered for efficient chip formation and evacuation in a variety of feed and depth settings, which supports steady process security and an improved surface finish on machined faces and shoulders. Within the appropriate tool family this insert enables effective machining of grooving and contour passages with fewer interruptions for chip removal. The carbide substrate together with the coating also helps maintain a sharp edge profile for high-quality part appearance. Operational efficiency through indexability and system approach As an indexable cutting solution, the insert allows quick indexing to fresh cutting edges and simplified inventory management, reducing machine downtime compared with solid cutters. The insert is part of a complete system comprising the cutter body, insert, clamp screw and shim where required; ensuring correct matching of seat and geometry is essential for optimal performance. This system-oriented approach supports predictable tool life and repeatability across production batches. For reliable milling performance with Tungaloy's AH140 grade, contact Metav Werkzeuge for availability and application guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutter compatibility and ordering options. Technical data Article number: 6820699 SKU: 6820699-Tungaloy Manufacturer SKU: TUN6820699 Model series: Fräswendeschneidplatten Material: Hartmetall Core dimensions Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0 mm Relief angle: 15° Included angle: 90° Hole: with hole Countersink: 40°–60° Design and special features Square insert form PVD-coated carbide, grade AH140 One-sided chipbreaker Cylindrical hole with single-side countersink Suitable for milling (face, shoulder, slot, high-feed, contour) System components: cutter body, insert, clamp screw, shim Designed for use in matched Tungaloy milling systems FAQ What materials can be machined with this insert? The SDMT1204AF AH140 Tungaloy insert is a PVD-coated carbide grade designed for versatile milling; it is suitable for a wide range of materials typically handled by milling cutters, subject to cutting data and tool family selection. How must the insert be mounted to ensure correct performance? Correct mounting requires a matching Tungaloy cutter body with the appropriate insert seat and clamp screw; the geometry and seat must be technically compatible to achieve the expected clamping security and cutting stability for the SDMT1204AF AH140. Is the SDMT1204AF AH140 available with different corner radii? This SKU is supplied with a corner radius of 0 mm as specified; other insert variants with different radii may be available under different designations within the Tungaloy product range. What role does the AH140 grade play in machining? The AH140 grade provides wear and fracture resistance with a sharp initial cutting edge, supporting process security and consistent edge life in milling operations where a fine, reliable edge is required. Can the insert be used for high-feed milling applications? Yes; depending on the assigned tool family and cutter body, the insert form and chipbreaker enable high-feed and specialized milling strategies as part of a matched Tungaloy milling system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204AF AH330 Wendeplatten - Tungaloy
The combination of PVD-coated carbide grade AH330, a sharp cutting edge and a robust one-sided chipbreaker provides reliable, wear- and break-resistant performance for milling operations; order this insert through Metav Werkzeuge or consult their specialists for application advice. SDMT 1204AF AH330 indexable insert for milling by Tungaloy SDMT1204AF is an indexable insert designed for Tungaloy milling systems, optimised for plan, shoulder, slot, high-feed and contour milling where a sharp edge and process security are required. PVD-coated carbide AH330 Sharp cutting edge, process-secure One-sided chipbreaker; cylindrical hole + countersink Square 12 mm plate, 4.76 mm thickness High-performance grade for dependable milling productivity The insert is made from PVD-coated carbide in grade AH330, a combination chosen for wear resistance and reduced risk of edge chipping during interrupted cuts. This material and coating pairing supports consistent cutting performance and longer tool life under typical milling loads. By specifying a grade engineered for both a sharp cutting edge and process security, the component reduces the need for frequent regrinding and minimises unscheduled machine downtime, which contributes directly to improved production efficiency and predictable machining costs. Geometry that simplifies set-up and stabilises the cut With a square 12 mm form and 4.76 mm thickness, the insert offers a stable contact area and straightforward indexability, helping to keep set-up times short. The 90° cutting angle and 0 mm corner radius provide a true shoulder capability, while the 15° relief angle allows reliable chip formation and clearance in a variety of milling strategies. The single-sided chipbreaker is configured to control chip flow for the assigned cutting direction, which enhances surface finish and reduces the chance of built-up edge on the tool. These design features serve production needs by combining repeatable accuracy with easy handling on the shop floor. Secure clamping and adaptable mounting for system compatibility The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) to ensure secure seating and clamp engagement in compatible cutter bodies. The system concept comprises the milling body, insert, clamping screw and, if required, a backing plate; all elements must be technically matched for safe operation. This modular approach gives machine shops the flexibility to equip a family of cutters while maintaining a consistent clamping principle. The clear specification of seating and hole style reduces assembly ambiguity and supports reliable repeatability in series production. Practical benefits for production planning and tool management Choosing this indexable insert supports predictable tool-change routines and inventory control because of its standardised geometry and Tungaloy system compatibility. The robust AH330 grade is intended for applications where a sharp edge and process reliability are jointly required, making it suitable for mixed-production environments that demand both surface quality and tool longevity. Where tool performance data is compared, the combination of coating, carbide substrate and chip control typically delivers a favourable balance between cutting life and part quality, aiding in decisions about tooling strategies and cost-per-part evaluations. For tailored recommendations on tooling families, clamping options and to order SDMT 1204AF AH330 inserts, contact Metav Werkzeuge directly by email or phone for expert guidance and rapid fulfilment. Technical data Article number: 6806251 Manufacturer SKU: TUN6806251 Supplier SKU: 6806251-Tungaloy Type: Indexable insert (SDMT1204AF) Model series: Milling indexable inserts Brand: Tungaloy Core dimensions Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0 mm Relief (clearance) angle: 15° Cutting angle: 90° Hole style: Cylindrical hole + one-side countersink (40°–60°) Design & special features Material: Carbide Coating/grade: PVD-coated, AH330 Chipbreaker: One-sided chipbreaker Plate form: Square Intended application: Milling (plan, shoulder, slot, high-feed, contour) System requirements: Matching insert seat, geometry and milling body; clamping screw and optional backing plate FAQ Which milling operations are suitable for this insert? The insert is intended for plan, shoulder, slot, high-feed and contour milling depending on the assigned tool family and cutter body. What is the carbide grade and coating? The SDMT1204AF is supplied in PVD-coated carbide grade AH330, designed for wear resistance and reduced edge chipping during milling. How must the insert be mounted in the cutter body? The indexable insert features a cylindrical hole with a single-side countersink (40°–60°) and requires a compatible clamping screw and, where applicable, a backing plate; proper seat geometry and clamping torque are essential. What geometry details affect machining performance? Key dimensions are a 12 mm square plate, 4.76 mm thickness, 0 mm corner radius, 15° relief angle and a 90° cutting angle; these parameters influence shoulder capability, chip control and surface finish. Is this insert compatible with non-Tungaloy systems? The insert is designed for Tungaloy milling systems; interchangeability depends on exact seat geometry and clamping design, so technical matching is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204AF AH330 Wendeplatten - Tungaloy
Benefit from the AH330 PVD-coated cemented carbide grade and the precise 90° geometry for process-secure milling: wear- and fracture-resistant cutting edges reduce downtime and maintain surface quality over long production runs. Order directly via Metav Werkzeuge or contact our consultants for specific machining recommendations. SDMT 1204AF AH330 Tungaloy indexable insert for milling The SDMT1204AF AH330 is an indexable insert for Tungaloy milling systems, engineered for stable shoulder, face and contour milling where a sharp cutting edge and consistent process security are required. PVD-coated AH330 carbide for wear resistance 90° square insert, 12 mm size Cylindrical hole with one-sided countersink Single-sided chipbreaker, 15° clearance angle Durable cutting grade for consistent production output The AH330 grade is a PVD-coated cemented carbide developed to deliver wear resistance and fracture toughness in milling operations. This combination supports longer tool life and a more predictable tool-change interval, which translates into fewer interruptions on the shop floor and improved overall equipment effectiveness. For manufacturers targeting stable surface quality and repeatable results, the robust grade reduces the likelihood of unexpected edge failures and keeps cycle times constant. Geometry engineered for accurate shoulder and face milling A 90° square geometry with a nominal size of 12 mm and a thickness of 4.76 mm provides a stiff cutting edge suitable for shoulder and face operations. The 0 mm corner radius produces a sharp edge for precise corner definition, while the 15° clearance angle lowers rubbing on the relief face and helps maintain cutting performance. The integrated single-sided chipbreaker controls chip flow for the assigned cutting conditions, improving surface finish and reducing heat build-up during longer passes. System compatibility and practical clamping details Correct seating and clamping are essential: the insert is intended for use within a Tungaloy milling system comprising a milling body, the indexable insert, a clamp screw and, where required, a shim. The insert features a cylindrical hole with a one-sided countersink (40°–60°) to match many clamping designs and ensure reliable fixation. Typical uses include plan, shoulder, slot, high-feed and contour milling, depending on the selected tool family. The SDMT1204AF AH330 format and chipbreaker arrangement make it a versatile choice for production environments that demand repeatability and straightforward tool management. For process-secure milling with Tungaloy AH330 inserts, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806256 Manufacturer SKU: TUN6806256 SKU: 6806256-Tungaloy Model series: Fräswendeschneidplatten Brand: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Clearance angle: 15° Corner radius: 0 mm Geometry angle: 90° Special features Shape: square Designation: SDMT1204AF Grade/coating: AH330 PVD-coated cemented carbide Chipbreaker: single-sided Hole style: cylindrical hole with one-sided countersink (40°–60°) Application: milling System components: milling body, indexable insert, clamp screw, possible shim FAQ What types of milling is this insert suitable for? The SDMT1204AF AH330 indexable insert is designed for plan, shoulder, slot, high-feed and contour milling depending on the selected tool family and milling body. What are the dimensional and geometric specifications of the insert? Size 12 mm, thickness 4.76 mm, 90° geometry, corner radius 0 mm and a 15° clearance angle are the core specifications for the SDMT1204AF AH330 Tungaloy insert (SKU 6806256-Tungaloy). How is the insert clamped in the milling body? The system requires a matching milling body, the indexable insert, a clamp screw and optionally a shim; the insert’s cylindrical hole with one-sided countersink (40°–60°) ensures secure clamping. What advantages does the AH330 grade provide? The AH330 PVD-coated cemented carbide grade offers enhanced wear resistance and fracture toughness for process-secure milling, reducing downtime and preserving edge integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204AF GH330 Wendeplatten - Tungaloy
Take advantage of the GH330 grade and robust carbide construction for improved edge stability and extended tool life; the precise square form and 15° clearance ensure stable engagement and repeatable results. Order the insert directly via Metav Werkzeuge or consult their specialists for application matching. SDMT 1204AF GH330 SDMT milling insert for milling – Tungaloy A SDMT1204AF GH330 indexable milling insert designed for Tungaloy milling systems, optimised for face, shoulder, slot, high‑feed and contour milling. Tungaloy GH330 grade for wear resistance Square insert, 12 mm size Cylindrical hole with single‑sided countersink 15° clearance angle for stable cutting Consistent edge stability and extended service life The combination of the GH330 cutting grade and carbide substrate delivers a balanced mix of wear resistance and toughness. This balance is particularly beneficial in interrupted and continuous milling where edge reliability matters. The grade is developed to support a stable cutting edge, so operators obtain consistent component quality and fewer index changes, which translates into improved uptime and reduced handling. Precise geometry for reliable process integration The square insert form (12 mm) with a cylindrical hole and single‑sided countersink (40°–60°) ensures secure clamping and repeatable seating in compatible tool bodies. The 15° clearance and 90° included angle provide predictable chip engagement and reduced cutting forces, while the 4.76 mm body thickness contributes to rigidity. These geometric features support stable cutter runout and repeatable results when the insert, cutter body and seat match technically. Targeted chip control and broad milling applications Equipped with a single‑sided chipbreaker, this insert promotes effective chip control across a range of milling tasks, from planing and shoulder work to high‑feed and contouring, depending on the assigned tool family. The zero corner radius supports sharp corner definition where required. Overall, the design focuses on process reliability and productivity: fewer interruptions for chip clearing, consistent surface finishes and predictable tool life contribute to more efficient production cycles. For availability of Tungaloy GH330 inserts and tailored advice on integration into existing tooling systems, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for quick application guidance and supply information Technical data Article number: 6806252 Manufacturer SKU: TUN6806252 SKU: 6806252-Tungaloy Product name: SDMT1204AF GH330 Tungaloy insert Numbers / Core technical data Plate size: 12 mm Thickness: 4.76 mm Clearance angle: 15° Included angle: 90° Corner radius: 0 mm Special features / Versions Grade: GH330 Material: carbide Plate form: square Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Typical use: milling (face, shoulder, slot, high‑feed, contour) Series: indexable milling inserts FAQ What milling operations is this insert intended for? The SDMT1204AF GH330 insert is designed for a variety of milling operations including face milling, shoulder milling, slotting, high‑feed and contour milling, subject to the assigned tool family. Which geometric details are most relevant for mounting? Key features are the square plate form (12 mm), 4.76 mm thickness, cylindrical hole with a single‑sided countersink (40°–60°), a 15° clearance angle and a 90° included angle, all of which affect seating and clamping in the tool body. What benefits does the GH330 grade provide? The GH330 Tungaloy grade balances wear resistance, toughness and cutting‑edge stability to support longer edge life and consistent surface quality in milling applications. How does chip control work with this insert? The one‑sided chipbreaker is designed to manage chips efficiently during a range of milling tasks, helping to reduce recutting and improve finish quality. Is the insert compatible with other Tungaloy milling systems? Compatibility requires that the insert seat, geometry and cutter body match technically; the SDMT1204AF is intended for use within Tungaloy milling systems that accept this ISO designation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204AF NS740 Wendeplatten - Tungaloy
Take advantage of the combination of NS740 cermet for superior surface quality, a square 90° form for versatile milling, and a single-sided chipbreaker that supports controlled chip flow. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific selection. SDMT 1204AF NS740 milling insert — Tungaloy indexable plate for finishing A SDMT 1204AF NS740 indexable insert designed for Tungaloy milling systems, intended for finishing to light machining of steel with emphasis on surface quality and dimensional accuracy Cermet grade NS740 for fine finishing Square 90° form for versatile milling Single-sided chipbreaker for controlled chips Cylindrical hole with countersink for secure clamping Achieve consistent fine surfaces and dimensional control The NS740 grade is a cermet cutting material optimised for the final passes on steel where surface quality and dimensional accuracy are decisive. Its composition promotes even wear and long contact life under finishing conditions, reducing the need for secondary grinding or rework. Specified relief and geometry maintain stable edge contact, so the result is reproducible part finish and predictable tool change intervals. Designed for secure clamping and straightforward integration A square plate form with a cylindrical hole and a one-sided countersink (40°–60°) provides reliable mechanical clamping in compatible milling bodies. The insert’s 4.76 mm thickness and 15° relief must match the pocket and clamping screw geometry of the cutter body to ensure correct seating and torque transfer. Where the insert family aligns with the cutter, setup time is reduced and repeatability of tool location is improved. Boost productivity in finishing and light machining operations When applied to facing, shoulder, slot or contour milling operations, this indexable plate supports higher process stability and constant surface results. The single-sided chipbreaker controls evacuation on finishing depths, enabling steady material removal and lowering the incidence of built-up edge. The combination of cermet grade and plate geometry helps to balance productivity with the need for high-quality surface output. Practical handling and application guidance for workshop use Manufactured from a carbide substrate with the NS740 cermet cutting grade, the insert is supplied in the SDMT 1204AF geometry with a corner radius of 0 mm for square forms. Correct selection of the matching milling body and clamping screw is essential; the seat, plate geometry and cutter body must be technically compatible to avoid misfit. For best results, follow the cutter manufacturer’s torque and seat-cleaning recommendations before assembly. Contact Metav Werkzeuge for tailored advice on selecting the right Tungaloy cermet insert or for application-specific recommendations — eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930. Technical Data Article number: 6821497 SKU: 6821497-Tungaloy Manufacturer SKU: TUN6821497 Model series: Fräswendeschneidplatten Type designation: SDMT1204AF NS740 Material: Hartmetall Data Thickness: 4.76 mm Plate size: 12 mm Corner radius: 0 mm Relief angle: 15° Edge angle: 90° Special features Cermet grade NS740 for finishing Carbide construction Square plate form (quadratisch) Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Intended application: milling (Fräsen) FAQ What applications suit this insert best? The SDMT 1204AF NS740 insert is intended for finishing to light machining in milling tasks such as facing, shoulder, slot and contour milling where surface finish and dimensional control are priorities. Is this insert compatible with non-Tungaloy milling bodies? Compatibility depends on pocket geometry and clamping method; the SDMT 1204AF requires a matching seat and clamping configuration. Use Tungaloy-compatible bodies or confirm technical conformity before assembly. Which materials can be machined with this grade? The NS740 cermet grade is optimised for steel finishing, offering uniform wear and improved surface outcomes when used under suitable cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204AF T3130 Wendeplatten - Tungaloy
Take advantage of the combination of reliable T3130 carbide performance, a square 12 mm format with secure clamping features, and compatibility with Tungaloy milling systems for consistent machining results; order the SDMT 1204AF T3130 indexable insert directly via Metav Werkzeuge or consult our technical team for assistance. SDMT 1204AF T3130 square indexable insert for milling – Tungaloy The SDMT1204AF T3130 is a square indexable insert designed for versatile milling tasks in Tungaloy milling systems, offering a balanced carbide grade for wear resistance and edge stability. Square 12 mm insert format Carbide grade T3130 for balanced performance Cylindrical hole with countersink 40°–60° Single-sided chipbreaker for stable chip flow Durable carbide grade for consistent productivity The insert is manufactured in carbide and specified with the T3130 grade, which combines wear resistance and toughness to maintain a stable cutting edge over longer cycles. This balance reduces the frequency of tool changes and helps maintain component surface quality in series production. The design supports a range of milling tasks — including face, shoulder, slot, high-feed and contour milling — so processes that demand repeatable results benefit from reduced downtime and predictable tool behaviour. Geometry and mounting that secure repeatable clamping With a 12 mm square format and a plate thickness of 4.76 mm, the insert features an included angle of 90° and a clearance angle of 15°, offering a robust contact area and positive seating in compatible tool bodies. The cylindrical hole with a one‑sided countersink (40°–60°) enables reliable centring and secure clamping, ensuring repeatable positioning and minimal micro-movement under load. Matching the seat geometry of the cutter body is essential for maximum life and consistent cutting performance. Controlled chip formation for clean machining results The single-sided chipbreaker is engineered to influence chip formation and evacuation, reducing the risk of built-up edge and improving surface finish in many common materials. When paired with an appropriate milling body and cutting data, the insert helps control vibration and chip flow, which contributes directly to process stability and predictable cycle times. The combination of geometry and chipbreaker function supports efficient material removal with fewer interruptions for rework. For high-process reliability with Tungaloy’s T3130 inserts, contact Metav Werkzeuge for advice on compatible cutter bodies and application-specific tooling: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6853834-Tungaloy Manufacturer SKU: TUN6853834 Manufacturer article number: 6853834 Model series: Milling indexable inserts Material: Carbide Coating / grade: T3130 Application: Milling Shape: Square Insert designation: SDMT1204AF Core specifications Size: 12 mm Thickness: 4.76 mm Included angle: 90° Clearance angle: 15° Corner radius: 0 mm Hole style: Cylindrical hole + one-sided countersink (40°–60°) Special features Square insert geometry Single-sided chipbreaker Cylindrical hole with countersink for secure clamping Carbide grade optimised for milling applications Designed for Tungaloy milling systems Requires matching seat geometry and clamping screw FAQ What milling tasks is this insert suitable for? The SDMT1204AF T3130 indexable insert is suitable for face, shoulder, groove, high-feed and contour milling when used in the correct Tungaloy milling body and with appropriate cutting data. Which materials can be machined with this grade? The T3130 carbide grade on the SDMT1204AF provides a balance of wear resistance and toughness, making it suitable for a broad range of materials commonly encountered in milling operations. How does the insert ensure secure mounting in the cutter body? The SDMT1204AF features a cylindrical hole with a one-sided countersink (40°–60°) and a robust 12 mm square seat, enabling reliable centring and secure clamping in compatible tool bodies. What is the benefit of the single-sided chipbreaker? The single-sided chipbreaker on this insert improves chip formation and evacuation, which helps maintain surface finish and reduces the chance of built-up edge in many applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204PD AH120 Wendeplatten - Tungaloy
Benefit from the PVD-coated AH120 grade and the secure clamping provided by the cylindrical hole with countersink for stable, productive milling; order the SDMT1204PD via Metav Werkzeuge or consult the technical team for application support. SDMT 1204PD AH120 square milling insert for high-process security — Tungaloy SDMT1204PD AH120 is a square indexable insert designed for milling applications where a sharp cutting edge and consistent process security are required. PVD-coated carbide grade AH120 High wear and chipping resistance Square insert 12 mm, 4.76 mm thickness Cylindrical hole with 40°–60° countersink Improved uptime through a wear-resistant cutting edge The PVD-coated AH120 carbide composition delivers a combination of wear resistance and edge stability that supports longer tool life and fewer interruptions for insert changes. The coating reduces thermal and abrasive wear, meaning the insert maintains a sharp cutting edge for an extended period under typical milling conditions. For manufacturers seeking predictable tool life and reduced machine downtime, this translates into steadier throughput and lower operational disturbance. Secure seating and accurate clamping for consistent surface finish The square format with a cylindrical hole and a single-sided countersink (40°–60°) ensures reliable clamping in compatible milling bodies. The specified 90° cutting angle and 15° clearance angle provide defined geometry for shoulder and slot milling operations. When seat geometry, insert form and cutter body match, the result is reduced vibration and improved dimensional repeatability — a direct benefit for components demanding consistent surface quality and tight tolerances. Process-ready design for a range of milling operations Engineered for plan, shoulder, groove, high-feed and contour milling as assigned by the corresponding tool family, this insert features a single-sided chipbreaker and a sharp edge form that promotes stable chip formation and evacuation. The combination of substrate and coating is aimed at avoidance of edge chipping under demanding cutting forces, supporting secure production in industrial settings. In systems where plate seat, geometry and cutter body are aligned, the insert contributes to predictable machining cycles and reliable component output. Contact Metav Werkzeuge for tailored application advice and to order the Tungaloy SDMT1204PD AH120 insert—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806260 Manufacturer SKU: TUN6806260 Merchant SKU: 6806260-Tungaloy Facts Insert size: 12 mm Thickness: 4.76 mm Cutting angle: 90° Clearance angle: 15° Corner radius: 0 mm Countersink angle: 40°–60° Special features Material: carbide Coating: PVD Grade: AH120 Shape: square Hole: cylindrical hole with single-sided countersink Chipbreaker: single-sided Application: milling Series: milling indexable inserts FAQ What materials is this insert intended for? The SDMT1204PD AH120 insert from Tungaloy is formulated as a wear- and chipping-resistant solution for general milling tasks; specific material compatibility should be confirmed against machining parameters and toolbody selection. How critical is matching the insert to the cutter body? Correct match of insert seat, geometry and cutter body is essential for secure clamping and optimal performance with the SDMT1204PD AH120; mismatched components can reduce process security and surface quality. Can the insert be used for high-feed milling? The geometry and chip control of this indexable plate support a range of milling operations including high-feed milling when assigned to the appropriate tool family and machining setup. What advantages does the PVD coating provide? The PVD coating on the AH120 grade improves thermal and abrasive resistance, helping to maintain a sharp cutting edge and to reduce flank and crater wear during sustained milling cycles. Is there a specific clamping screw or underlay required? The system comprises the milling body, indexable insert, clamping screw and, where relevant, a support pad; correct interface components must be used to ensure the SDMT1204PD functions reliably. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204PD AH120 Wendeplatten - Tungaloy
Take advantage of the combination of wear resistance, a sharp cutting edge and straightforward system compatibility for reliable, productive milling results; order the SDMT1204PD insert directly via Metav Werkzeuge or ask the consultants for tailored technical advice. SDMT1204PD AH120 – Indexable milling insert for high-process stability by Tungaloy A SDMT1204PD AH120 insert developed for milling operations within Tungaloy milling systems, suitable for plan, shoulder, slot, high-feed and contour milling depending on the assigned cutter family PVD-coated carbide AH120 for wear resistance Sharp cutting edge with high process stability Square 12 mm insert with 4.76 mm thickness Cylindrical bore with 40°–60° countersink Consistent edge life through advanced grade design The PVD-coated grade AH120 delivers pronounced wear resistance, reducing flank and crater wear under continuous operation. By combining a robust substrate with a thin, adherent coating, the insert maintains a sharp cutting edge for longer periods, which translates into fewer changeovers and reduced machine downtime. The wear characteristics are particularly beneficial when a resistant edge and predictable performance are demanded, supporting cost-efficient batch production and repeatable process windows. Geometry and dimensions that support precise milling This indexable insert is supplied in a square form with a nominal size of 12 mm and a plate thickness of 4.76 mm, dimensions that suit compact milling bodies and provide stable clamping. The zero corner radius and the specified geometry enable clean 90° shoulder generation and reliable contour definition. The combination of size and thickness also aids in vibration damping on short overhangs, improving surface finish and dimensional consistency across components. System compatibility and secure clamping for safe machining Designed for Tungaloy milling assemblies, the insert requires matching insert seat, geometry and cutter body to perform as intended; the system comprises the milling body, the indexable insert, a clamping screw and, where necessary, a shim. The insert is supplied with a cylindrical bore and a one‑sided countersink (40°–60°) to ensure positive location and secure fastening. The specified tool geometry with a 90° contact angle and a clearance of 15° facilitates predictable chip flow and efficient material removal across typical milling tasks. If further technical data are required or there is uncertainty about suitability, technical support is available at info@metav-werkzeuge.com or by telephone at +49 2822 7131930. Contact Metav Werkzeuge today for detailed compatibility checks or to request the SDMT1204PD AH120 insert for your milling system and application Technical Data Article number: 6806258 Manufacturer SKU: TUN6806258 Model series: Fräswendeschneidplatten Material: Carbide ISO designation: 1204PD Shape: Square (quadratisch) Grade: AH120 Coating: PVD-coated carbide Facts Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0 mm Contact angle: 90° Clearance (free) angle: 15° Bore: with bore Special features Single-sided chipbreaker Cylindrical bore + one-sided countersink (40°–60°) Suitable for plan, shoulder, slot, high-feed and contour milling depending on cutter family System components: milling body, indexable insert, clamping screw, possible shim Designed for process stability and sharp cutting edge requirements FAQ What applications is the SDMT1204PD AH120 best suited for? The SDMT1204PD AH120 insert is intended for milling tasks such as plan, shoulder, slot, high‑feed and contour milling, where the cutter family and body support the selected insert geometry. Which tool components must match to ensure safe operation? The insert requires a technically compatible insert seat, matching geometry and a correctly specified milling body; the system typically includes the milling body, the indexable insert, the clamping screw and, if applicable, a shim. How does the AH120 grade influence machining performance? The AH120 PVD-coated carbide grade provides enhanced wear resistance and a durable cutting edge, offering predictable tool life and stable process behaviour under continuous milling. What fixing features does the insert offer for reliable clamping? The SDMT1204PD is supplied with a cylindrical bore and a one‑sided countersink (40°–60°) to ensure secure location and reliable clamping within compatible Tungaloy milling bodies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204PD AH140 Wendeplatten - Tungaloy
High wear and chipping resistance from the AH140 PVD-coated carbide ensures steady milling performance and a sharp cutting edge for demanding operations; the square 12 mm plate with a cylindrical hole and 40°–60° countersink provides secure clamping in compatible bodies. Order the insert directly via Metav Werkzeuge or contact our consultants for matching cutter bodies and setup advice. SDMT 1204PD AH140 indexable insert for milling — Tungaloy A SDMT1204PD AH140 Tungaloy insert engineered for precision face, shoulder, slot and high-feed milling in Tungaloy milling systems. PVD-coated carbide grade AH140 Sharp, chipping-resistant cutting edge Square 12 mm plate, thickness 4.76 mm Cylindrical hole with 40°–60° countersink Reliable cutting performance for continuous milling The PVD-coated AH140 grade, combined with a cemented carbide substrate, is designed for wear resistance and reduced edge breakdown under interrupted and continuous cuts. This composition supports a consistently sharp cutting edge and more predictable tool life, which reduces unscheduled tool changes and helps maintain production flow. The coating’s thin, hard layer improves thermal stability and friction behaviour, translating into steadier machining and fewer surface defects. Secure seating and system compatibility for productivity The plate’s square 12 mm format, 4.76 mm thickness and cylindrical hole with single-sided countersink (40°–60°) ensure a precise fit in cutters that match Tungaloy specifications; correct seat geometry and clamping are essential for repeatable accuracy. A 15° clearance angle and 90° cutting angle make the insert suitable for shoulder and face milling operations where perpendicular walls and defined step-offs are required. Confirm that the cutter body, plate seat and clamp correspond to the same system standard to guarantee safe assembly and optimal cutting conditions. Practical benefits and recommended milling applications The insert suits a range of milling tasks—face, shoulder, slot, high-feed and contour milling—depending on the chosen tool family, and the one-sided chipbreaker geometry supports stable chip formation and process security. Reduced chipping risk from the AH140 grade improves component surface quality while lowering scrap rates. For applications demanding a sharp cutting edge and consistent performance across batches, this indexable insert offers a balance of precision and productivity, especially where predictable tool behaviour is a priority. For ordering and application advice on Tungaloy AH140 inserts, contact Metav Werkzeuge for tailored recommendations and matching cutter bodies: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Manufacturer article number: 6820700 SKU: 6820700-Tungaloy Manufacturer SKU: TUN6820700 Model series: Milling indexable inserts Name: SDMT1204PD AH140 Tungaloy insert Material: Carbide Core specifications Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0 mm Clearance angle: 15° Cutting angle: 90° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Coating: PVD Grade: AH140 Materials & special features For Tungaloy milling systems One-sided chipbreaker Square plate form Wear- and chipping-resistant grade for milling Typical applications: face, shoulder, slot, high-feed, contour milling FAQ What milling tasks is this insert suitable for? The SDMT1204PD AH140 Tungaloy insert is suitable for face, shoulder, slot, high-feed and contour milling depending on the assigned tool family. How does the AH140 grade affect tool life? The AH140 PVD-coated carbide grade improves wear resistance and reduces chipping, which supports longer, more predictable tool life for milling operations. Does this insert fit any milling cutter? The insert requires a cutter body with a matching plate seat and clamping geometry; the SDMT1204PD must be used in compatible Tungaloy milling systems with the correct seat and clamp. What does the hole style mean for clamping? The cylindrical hole with a single-sided countersink (40°–60°) provides secure clamping and accurate location in cutter bodies that accept this hole specification. Can the insert produce perpendicular shoulders? Yes; the 90° cutting angle and 15° clearance make the insert suitable for producing defined perpendicular walls and shoulders when used in an appropriate cutter body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204PD AH140 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH140 for extended tool life and the square 12 mm geometry with 90° corner angle for precise, rigid milling. Order the inserts directly via Metav Werkzeuge or consult our advisors for application matching and availability. SDMT 1204PD AH140 SDMT milling insert – PVD-coated carbide by Tungaloy SDMT1204PD AH140 is an indexable milling insert engineered for reliable face, shoulder, slot, high-feed and contour milling within compatible Tungaloy milling systems. SDMT1204PD geometry for Tungaloy milling systems PVD-coated carbide AH140 for wear resistance Square 12 mm plate with 90° corner angle Cylindrical hole with single-side countersink Consistent cutting performance that extends tool life The PVD-coated carbide grade AH140 delivers a wear- and chipping-resistant cutting edge that supports longer, predictable tool life and reduces unplanned tool changes. As an indexable insert with a defined 90° corner angle and a sharp cutting edge, it produces stable results across repetitive operations; this translates to fewer machine stops and a lower cost per component. The coating reduces built-up edge formation and improves surface finish, while the robust substrate maintains edge integrity under moderate interruptions and varying cutting conditions. Secure clamping and system compatibility for trouble-free machining Designed with a cylindrical hole and one-sided countersink (40°–60°), the insert enables positive clamping with the matching clamp screw and seat on the cutter body. The plate thickness of 4.76 mm and the 12 mm square size provide mechanical rigidity that helps resist bending moments during heavy engagement. The 15° clearance angle reduces rubbing while the zero corner radius supports sharp profiles; these geometric details matter for secure fixation and repeatable positioning, especially when inserts are rotated or replaced during production. Versatile application range and improved chip control Assigned to Tungaloy milling systems, this insert is suitable for a variety of milling tasks—face, shoulder, slot, high-feed and contour milling—depending on the chosen cutter family. The single-sided chipbreaker aids in breaking and directing chips away from the cutting zone, which improves process stability and reduces heat concentration on the cutting edge. Where a sharp edge and process security are required, this grade offers a pragmatic balance between productivity and surface quality, making it well suited to both job-shop operations and series production. For quick stock checks, compatibility advice or to secure SDMT1204PD AH140 inserts from Tungaloy, please contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss the optimal configuration for the intended milling application Technical data Article number: 6817237 SKU: 6817237-Tungaloy Manufacturer SKU: TUN6817237 Data Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0 mm Clearance angle: 15° Main angle: 90° Special features PVD-coated carbide (AH140) Square plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Suitable for face, shoulder, slot, high-feed and contour milling System: milling body, indexable insert, clamp screw and optional backing pad ISO designation: SDMT1204PD FAQ What types of milling is this insert suitable for? The SDMT1204PD AH140 insert is specified for face, shoulder, slot, high-feed and contour milling when used in the appropriate Tungaloy milling body and tool family. How does the AH140 grade affect performance? The AH140 PVD-coated carbide grade provides wear and chipping resistance, which increases process security and often extends tool life compared with uncoated grades. Is the insert compatible with any cutter body? Compatibility requires a matching plate seat and geometry; the insert seat, geometry and milling body must be technically consistent with the SDMT1204PD form. What does the hole and countersink design provide? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping with the designated clamp screw and helps maintain repeatable positioning during index changes. Can the insert produce sharp corners? Yes, the zero corner radius combined with the 90° corner angle is intended to give a sharp edge, suitable for precise profile work and defined shoulder features. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204PD AH330 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH330 grade, a sharp cutting edge and a secure hole-and-counterbore design to achieve reliable, repeatable milling performance. Order genuine Tungaloy indexable inserts directly via Metav Werkzeuge or ask the consultants for application advice. SDMT 1204PD AH330 Tungaloy indexable insert for milling The SDMT1204PD AH330 Tungaloy indexable insert is a square carbide insert designed for robust performance in a wide range of milling operations, providing wear resistance and consistent cutting edge stability. PVD-coated carbide AH330 Sharp cutting edge for process security Square 12 mm insert, 4.76 mm thickness Cylindrical hole with countersink 40°–60° Greater process reliability for consistent production The combination of a PVD-coated surface and the AH330 carbide grade gives this insert excellent wear resistance, which translates into longer intervals between indexings and more predictable tool life. In practice, the coating reduces flank wear and helps preserve a sharp cutting edge, so machining tolerances remain stable over longer runs. For manufacturers aiming to reduce variance in batch production, this means fewer tool changes, less scrap and a smoother production flow. Geometry and fit engineered for secure clamping A technically matched insert seat, geometry and milling body are essential for safe operation. The insert features a square 12 mm form with a 4.76 mm thickness and a 0 mm corner radius, allowing precise engagement on flat, shoulder and slot faces. The cylindrical hole with one-sided countersink (40°–60°) ensures a reproducible clamp position and reliable seating against the screw and pocket. These mechanical details reduce micro-movement under cutting loads, improving dimensional repeatability and surface finish while simplifying tool assembly on compatible milling bodies. Clear application advantages and machining guidance Designed for general milling tasks — including plan, shoulder, slot, high-feed and contour milling depending on the assigned tool family — the insert supports a variety of steel and alloy applications when paired with a suitable tool body. The sharp cutting geometry favours clean chip separation and stable cutting forces; where vibration control and chip evacuation matter, the one-sided chipbreaker promotes regular chip formation. For users less familiar with indexable tooling: a chipbreaker shapes the flow of swarf to avoid entanglement and to protect the insert edge from irregular loading. Practical handling, indexing and economy Handling and replacement are straightforward: the centre hole and countersink guide the insert into the correct seat for each indexing action, and the standard square form offers four usable edges per insert where applicable. That multiplicity of edges improves cost-efficiency per cutting edge compared with single-edge tools. Where process security and repeatable edge quality are priorities, this design helps to lower operating costs by extending the effective use of each insert while maintaining surface quality. For genuine Tungaloy performance and availability, contact Metav Werkzeuge to discuss suitability for specific milling tasks or to secure the SDMT1204PD AH330 insert for immediate supply. Technical Data Article number: 6806259 Manufacturer SKU: TUN6806259 Internal SKU: 6806259-Tungaloy Type: SDMT 1204PD Grade: AH330 Core technical data Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0 mm Relief angle: 15° Included hole: yes Hole style: cylindrical hole with one-sided countersink (40°–60°) Materials & features Material: carbide (Hartmetall) Coating: PVD (AH330) Shape: square Application: milling Typical uses: plan, shoulder, slot, high-feed and contour milling (depending on tool family) FAQ Which materials can be machined with this insert? The SDMT1204PD AH330 Tungaloy indexable insert is intended for milling a broad range of materials when used in the correct tool family; the PVD-coated AH330 grade offers good wear resistance across steels and common alloys. How is the insert fixed in the milling body? The insert seats on a pocket and is secured by a clamping screw; the cylindrical hole with one-sided countersink ensures correct centring and a reproducible clamp position for secure fixation. What advantages does the AH330 grade provide? AH330 combines a PVD coating with a wear- and fracture-resistant carbide substrate to preserve a sharp cutting edge and increase process security during interrupted and continuous milling. Is this insert suitable for high-feed milling? Yes; when mounted in a compatible high-feed tool body from the same system family, the geometry and chip control of this insert can be used for high-feed and heavy-duty operations as specified by the tool manufacturer. How many cutting edges are usable per insert? The square geometry offers multiple cutting edges; depending on wear and your tool setup, each edge can be indexed to present a fresh cutting profile, improving cost efficiency per edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204PD AH330 Wendeplatten - Tungaloy
The combination of a PVD-coated AH330 grade and a robust carbide substrate ensures high wear resistance and reliable chip control for industrial milling cycles; matching the plate seat, geometry and cutter body preserves process stability. Order availability and technical clarification are possible via Metav Werkzeuge for seamless integration into production workflows. SDMT 1204PD AH330 – SDMT insert for milling (Tungaloy) The SDMT1204PD AH330 is a PVD-coated carbide indexable insert designed for industrial face, shoulder and slot milling with emphasis on a sharp cutting edge and consistent process security. PVD-coated carbide AH330 grade Square plate 12 mm, thickness 4.76 mm Compatible with Tungaloy milling systems Single-sided chipbreaker, 90° cutting angle Increased tool life through optimised coating and substrate The combination of a PVD-coated surface and a wear-resistant carbide substrate in the AH330 grade reduces flank and crater wear under demanding cyclic loads. This geometry-and-coating pairing promotes stable cutting-edge retention, which translates into fewer insert changes and longer uninterrupted production runs. The result is measurable process reliability and reduced tool-management overhead in batch and continuous machining environments. Precise fit and compact geometry for repeatable results A square plate with a nominal size of 12 mm and a thickness of 4.76 mm delivers a compact profile suited to confined pockets and multi-axis cutters. The insert's 90° cutting angle and 15° clearance ensure predictable engagement angles for face and shoulder operations, while a corner radius of 0 mm provides the sharpness required for fine contouring and slotting. Correct matching of the plate seat, the cutter body and the clamping screw is essential for repeatable accuracy and is part of the Tungaloy system philosophy. Versatile milling applications and effective chip control Designed for a wide range of milling tasks — from face milling and shoulder milling to slot and high-feed operations — the insert features a single-sided chipbreaker that supports consistent chip formation and evacuation. The cylindrical hole with a one-sided countersink (40°–60°) secures the insert in the pocket while allowing the necessary clamping torque. This chip control strategy reduces edge chipping and helps maintain surface finish quality during interrupted cuts and varying feed rates. Installation compatibility and system-level benefits The insert is intended for use only in compatible Tungaloy milling bodies where plate seat, geometry and cutter design match the insert specification. The system comprises the milling body, indexable insert, clamping screw and, where required, a backing plate to achieve the correct seating. When integrated correctly, the design offers predictable tool life, reduced setup time and simpler inventory management thanks to standardised insert indexing and repeatable mechanical clamping. For material- and process-specific advice on integrating Tungaloy AH330 inserts into production, contact Metav Werkzeuge; technical enquiries: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6806261 Manufacturer SKU: TUN6806261 SKU: 6806261-Tungaloy Model series: Milling indexable inserts Specifications Plate size: 12 mm Plate thickness: 4.76 mm Cutting angle: 90° Clearance (free) angle: 15° Corner radius: 0 mm Features Material: carbide Coating: PVD, grade AH330 Shape: square Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: milling System composition: milling body, indexable insert, clamping screw, optional backing plate FAQ What materials are suitable for these inserts? The SDMT1204PD AH330 insert is intended for a broad range of milling tasks where a sharp cutting edge and process security are required; the AH330 coating offers enhanced wear and chipping resistance for demanding operations. How does the chipbreaker affect performance? The single-sided chipbreaker on the SDMT1204PD promotes controlled chip formation and evacuation, reducing the risk of edge damage during interrupted cuts and improving surface quality. Is the insert compatible with non-Tungaloy cutter bodies? The insert requires a cutter body whose seat, geometry and clamping arrangement match the SDMT1204PD specifications; incorrect seat geometry may compromise stability and is not recommended. Which operations are typical for this insert? Typical uses include face milling, shoulder milling, slotting and high-feed contour passes, depending on the assigned cutter family and machining parameters. What is the significance of the 90° cutting angle and 15° clearance? A 90° cutting angle provides robust engagement for shoulder and face milling, while the 15° clearance helps to reduce rubbing and improves tool life under varying depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204PD GH330 Wendeplatten - Tungaloy
Take advantage of the combination of durable GH330 carbide grade, precise 12 mm square geometry and a secure 4.76 mm clamping interface to ensure consistent milling performance and reduced tool-change downtime. Order the SDMT1204PD GH330 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SDMT 1204PD GH330 Indexable insert for milling – Tungaloy The SDMT1204PD GH330 is an indexable insert developed for milling operations in Tungaloy milling systems, requiring a technically matching insert seat and cutter body for optimal performance. Square insert, 12 mm edge, 90° cutting angle Carbide grade GH330 for wear resistance 4.76 mm plate thickness for sturdy clamping Cylindrical hole with 40°–60° countersink Long-lasting cutting performance and wear resistance The combination of the GH330 grade and a carbide substrate delivers a balanced mix of wear resistance and toughness that supports sustained milling cycles. This behaviour translates into a longer life for each cutting edge and fewer interruptions for index changes, which increases net productivity on the shop floor. The material formulation is designed to support stable cutting-edge geometry under typical milling loads, making the insert suitable where controlled flank wear and consistent surface finish are priorities. Secure clamping and dimensional accuracy for repeatable results A robust plate thickness of 4.76 mm together with a central hole and a one-sided countersink provides reliable seating and repeatable clamping forces. The 12 mm square form and the defined 90° cutting angle ensure predictable engagement with the workpiece and simplify cutter set-up. The insert’s 15° relief angle aids chip evacuation while maintaining edge support; matching the insert seat, geometry and cutter body is essential to achieve the advertised stability and repeatability in production. Adaptable across common milling tasks with clear system rules Designed for a range of milling operations—planing, shoulder, slot, high-feed and contour milling depending on the associated tool family—the indexable design permits quick re-indexing and easy edge replacement. Where tool families specify a particular geometry or seat, the insert complements those demands by providing a stable cutting edge and a single-sided chipbreaker that helps direct chips away from the cut, improving process security and surface quality. Practical efficiency and support for industrial machining Using an indexable insert reduces maintenance time compared with solid tools and contributes to lower per-part tooling cost when managed correctly. The single-sided chipbreaker and the insert’s mechanical features support consistent chip control, decreasing the risk of rework. For procurement and process engineers, the clear system composition—cutter body, insert, clamp screw and, where required, a backing plate—simplifies inventory planning and spare-part management. If there is any uncertainty about the correct geometry or application, technical consultation is available to confirm compatibility with the chosen milling system. For robust, productivity-focused milling solutions, request availability and application advice for the Tungaloy SDMT1204PD GH330 from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable cutter families and stock levels. Technical Data Article number: 6806262 Manufacturer SKU: TUN6806262 SKU: 6806262-Tungaloy Model series: Fräswendeschneidplatten Material: Carbide ISO designation: SDMT1204PD Facts Plate thickness: 4.76 mm Insert size: 12 mm Cutting angle: 90° Relief angle: 15° Corner radius: 0 mm Special features Square plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Carbide grade GH330 Designed for Tungaloy milling systems FAQ Is this insert compatible with any milling cutter? The insert requires a matching insert seat and cutter body; the SDMT1204PD GH330 is intended for use within Tungaloy milling systems where geometry and clamping match the insert specification. Which milling operations are suitable for this insert? Typical uses include plan, shoulder, slot, high-feed and contour milling, depending on the assigned cutter family and its recommended application. How is chip control achieved with this insert? Chip control is provided by a single-sided chipbreaker integrated into the insert geometry, designed to direct chips away from the cut for improved process security. How many cutting edges are available per insert and how is indexing performed? The square form offers multiple usable edges; indexing is performed by unclamping and rotating the insert to the next edge, following the cutter manufacturer’s clamping procedure. Can the SDMT1204PD GH330 be used for heavy interrupted cuts? The GH330 grade balances wear resistance and toughness to handle a range of milling loads; selection for heavy interrupted cuts should consider the cutter body and clamping rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204PD NS740 Wendeplatten - Tungaloy
Combine the NS740 cermet grade's excellent surface finish with the predictable wear behaviour of a compact square 12 mm, 90° geometry and the secure clamping provided by the cylindric hole with countersink; order the SDMT1204PD directly via Metav Werkzeuge or request application advice from their consultants. SDMT 1204PD NS740 — Indexable milling insert for milling, Tungaloy SDMT 1204PD NS740 is an indexable insert designed for Tungaloy milling systems, intended for finishing to light machining of steel with a focus on surface quality and dimensional accuracy Cermet grade NS740 for fine finishing Square 12 mm size, 90° geometry 4.76 mm plate thickness with hole 15° relief and single-sided chipbreaker Higher-quality surface finish with cermet precision The combination of the NS740 cermet composition and the insert's geometry delivers a noticeable improvement in surface finish and dimensional accuracy during finishing operations. Cermet as a substrate offers a fine-grained cutting edge that maintains form under light to medium cutting forces, which reduces the need for downstream polishing. Where consistent component appearance and repeatable tolerances matter, the cermet grade promotes uniform wear and predictable tool life, contributing to more efficient process planning and less rework. Secure seating and system compatibility for reliable milling Designed for Tungaloy milling systems, the insert features a square 12 mm form with a 4.76 mm plate thickness, a cylindrical hole plus a one-sided countersink (40°–60°) and a 15° relief angle to ensure stable clamping and precise seat alignment. The model series requires the insert seat, geometry and milling body to match technically, so correct pocket design and clamping screw selection are essential for achieving the rated performance. The 90° main cutting edge geometry supports common shoulder and face-milling tasks while simplifying toolpath programming. Consistent chip control and process reliability A single-sided chipbreaker combined with the cermet grade balances chip formation and evacuation for finishing feeds, helping to avoid surface damage and build-up on the cutting edge. This results in stable metal removal rates and consistent part quality across runs. For manufacturers aiming to increase first-pass yield and reduce inspection overhead, the insert's emphasis on stable wear behaviour and surface integrity supports higher overall process efficiency and lower total manufacturing cost per part. Contact Metav Werkzeuge for technical selection and availability of the Tungaloy SDMT1204PD NS740 insert—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6821498 SKU: 6821498-Tungaloy Manufacturer SKU: TUN6821498 Material: Carbide Core specifications Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0 mm Relief/ clearance angle: 15° Included angle: 90° Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Grade: NS740 Designs and special features Quadrangular / square plate form Cermet or coated cermet grade Single-sided chipbreaker Designed for finishing to light machining of steel Model series: indexable milling inserts for Tungaloy milling systems System components: milling body, indexable insert, clamping screw, optional shim FAQ Will this insert fit non-Tungaloy milling bodies? Compatibility depends on the mating seat and geometry; the SDMT 1204PD NS740 requires a matching pocket and clamping concept, so use only bodies specified for this insert geometry. For which materials is this grade intended? The NS740 cermet grade is intended for finishing to light machining of steel, prioritising surface quality and dimensional control in steel components. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and correct seating of the SDMT1204PD NS740 insert when used with the appropriate clamping screw and shim. What benefit does the single-sided chipbreaker provide? The single-sided chipbreaker improves chip formation and evacuation during finishing feeds, supporting stable cutting conditions and preventing edge build-up on the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMT 1204PD T3130 Wendeplatten - Tungaloy
Take advantage of a carbide insert that combines balanced wear resistance, secure clamping and a geometry designed for productive milling; order the insert directly via Metav Werkzeuge or consult our specialists for assistance. SDMT 1204PD T3130 milling insert — Tungaloy square indexable insert for milling A SDMT 1204PD T3130 is an indexable milling insert engineered for face, shoulder, slot, high-feed and contour milling within Tungaloy milling systems. T3130 grade for balanced wear resistance Square 12 mm insert, 4.76 mm thickness 15° relief angle for stable cutting Cylindrical hole with 40°–60° countersink Reliable performance for productive milling The combination of the T3130 cutting grade and carbide substrate delivers a dependable balance between wear resistance and toughness, making the insert well suited to industrial milling cycles. The chosen grade supports a stable cutting edge, which reduces unexpected edge chipping and keeps tool change intervals predictable. This leads to higher machine uptime and improved process economics by lowering scrap risk and spreading tooling cost over longer production runs. Secure clamping and consistent positioning The insert is designed for secure mounting with a cylindrical hole and a one-sided countersink (40°–60°), working together with the clamp screw and backing pad to guarantee repeatable seating. The 15° relief angle reduces flank contact during entry and exit, decreasing heat buildup at the cutting edge and enhancing dimensional stability. Clear mechanical compatibility between insert seat, geometry and cutter body is essential for safe operation; this insert is intended for use in matching Tungaloy milling tool bodies. Practical dimensions that ease tooling decisions A compact 12 mm square form with a 4.76 mm thickness and zero corner radius provides a precise cutting corner for form-critical features and tight shoulder work. The single-sided chipbreaker assists chip control on common milling strategies, contributing to a cleaner swarf flow and a more consistent surface finish. These measured characteristics simplify tool selection for routine milling tasks while enabling higher material removal rates where the tool family permits. Proven choice for system-level process stability When process reliability and consistent results are priorities, this Tungaloy solution supports a systematic approach to milling: matched insert geometry, suitable carbide grade and robust clamping minimise variability in production. The SDMT 1204PD T3130 insert is specified where repeatable edge life and manageable chip formation are required, offering a pragmatic balance of performance and economy for industrial workshops and production lines. Contact Metav Werkzeuge today to confirm cutter compatibility and to request tailored recommendations for Tungaloy inserts and milling bodies; Metav Werkzeuge can advise on matching inserts to the holding system and production goals Technical Data Article number: 6853835 Manufacturer SKU: TUN6853835 Product SKU: 6853835-Tungaloy Manufacturer: Tungaloy Core technical data Insert size: 12 mm Thickness: 4.76 mm Relief angle: 15° Corner radius: 0 mm Included angle: 90° ISO designation: 1204PD Special features Material: carbide Grade: T3130 Shape: square Chipbreaker: single-sided Hole: cylindrical with 40°–60° countersink Platen style: with hole Application: milling Compatibility: for Tungaloy milling systems FAQ What milling operations suit this insert best? The SDMT 1204PD T3130 is intended for face, shoulder, slot, high-feed and contour milling within compatible Tungaloy tool families. Is the insert compatible with non-Tungaloy cutter bodies? Compatibility depends on seat geometry and clamping method; the SDMT 1204PD T3130 requires a matching seat and clamp system for secure mounting. Which workpiece materials benefit most from the T3130 grade? The T3130 cutting grade provides a balanced combination of wear resistance and toughness, making it suitable for a wide range of general milling tasks where predictable edge life is required. How does the hole and countersink improve performance? The cylindrical hole with a 40°–60° countersink ensures repeatable seating and stable clamping, reducing micro-movements that can shorten insert life. Can the zero corner radius achieve good surface quality? Yes — the zero corner radius yields a defined cutting edge for sharp shoulder and contour features, and, together with the single-sided chipbreaker, supports consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMW 090308 UX30 Wendeplatten - Tungaloy
The compact design and sharp cutting geometry ensure efficient chip formation and reduced cutting forces, while the square form with a 0.8 mm corner radius provides stable, repeatable results. Order the insert directly via Metav Werkzeuge or consult our team for application support. SDMW 090308 UX30 indexable milling insert for milling – Tungaloy, 0.8 mm corner radius SDMW090308 UX30 is an indexable milling insert designed for face, shoulder, slot and high-feed milling within compatible Tungaloy milling systems Sharp cutting edge for low cutting forces Square insert with 0.8 mm corner radius Cylindrical hole with single-side countersink 3.18 mm plate thickness for stable clamping Consistent milling performance for production environments The square insert geometry with a 90° included angle and a 0.8 mm corner radius offers a reliable solution for operations where dimensional stability and edge life are critical. Designed as part of a complete milling system, the component requires an exact match between the insert seat, geometry and cutter body to ensure optimal performance. The result is reduced vibration and consistent surface finish over repeated indexing, which supports higher machine utilisation and predictable process planning. Clear explanation of material and cutting behaviour The grade UX30 is an uncoated cemented carbide formulation that prioritises a sharp cutting edge and controlled chip formation. This combination reduces instantaneous cutting forces and helps maintain stable cutting conditions in interrupted or continuous milling passes. For workshop staff unfamiliar with carbide grades: an uncoated carbide insert offers excellent initial sharpness and predictable wear progression, making it suitable when low cutting forces and good chip control are the main requirements. Secure clamping and straightforward integration A cylindrical hole with a single-sided countersink (40°–60°) ensures precise seating and repeatable clamping when mounted with the correct screw and, if required, a locating pad. The insert has a plate thickness of 3.18 mm, which contributes to mechanical rigidity at the cutting edge and reduces the risk of fracturing under normal operating parameters. When integrated into approved Tungaloy milling bodies, the indexable design supports quick indexing and minimises downtime during tool changes, improving overall shopfloor efficiency. Contact Metav Werkzeuge to discuss suitability for specific milling tasks, request the Tungaloy SDMW090308 UX30 technical sheet or arrange an order by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6806267 Manufacturer: Tungaloy Manufacturer SKU: TUN6806267 Model series: Milling indexable inserts Numbers / Core technical data ISO designation: 090308 Corner radius: 0.8 mm Included angle: 90° Clearance angle: 15° Plate thickness: 3.18 mm Plate size: 09 Design and special features Grade: UX30 (uncoated cemented carbide) Insert designation: SDMW090308 Insert form: square Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: none FAQ What operations is this insert intended for? The SDMW090308 UX30 Tungaloy insert is intended for milling operations such as face, shoulder, slot and high-feed milling within compatible Tungaloy milling systems. How does the UX30 grade influence cutting performance? The UX30 grade in this SDMW090308 UX30 insert provides a sharp, uncoated carbide edge focused on low cutting forces and reliable chip formation, which helps maintain stable cutting conditions. Which clamping components are required for correct installation? Correct installation of the SDMW090308 UX30 requires the matching Tungaloy milling body, an appropriate clamping screw and, where applicable, a locating pad to engage the cylindrical hole and single-side countersink. Can the insert be indexed to a new cutting edge on-site? The indexable design of the SDMW090308 UX30 allows straightforward indexing in compatible milling bodies, enabling quick edge changes to reduce downtime. What are the geometric highlights that affect machining results? The square shape with a 90° included angle, 0.8 mm corner radius and 3.18 mm plate thickness all contribute to edge stability, predictable wear and consistent surface finish when used in the correct milling system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDMW 120408 UX30 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cutting edge, low cutting forces and reliable chip formation for smooth milling cycles; order the inserts directly via Metav Werkzeuge or consult our specialists to confirm system compatibility. SDMW 120408 UX30 indexable milling insert by Tungaloy — square insert for precision milling SDMW120408 UX30 is an indexable insert for milling applications, developed for low cutting forces and consistent chip formation where compatibility with the matching milling body is required. Sharp cutting edge for low cutting forces Square insert, 12 mm size, 0.8 mm corner radius Uncoated carbide grade UX30 for good chip formation Cylindrical hole with single-side countersink (40°–60°) Increased process efficiency through low cutting forces and reliable chip formation A grade engineered for low cutting forces reduces spindle load and enables stable machining of a wide range of materials during milling. The uncoated carbide UX30 provides a sharp cutting edge that promotes predictable chip flow and reduces the tendency to build up material on the cutting edge. When paired with the correct milling body, this geometry supports higher feed rates in finishing and semi-finishing operations while maintaining surface quality. The benefit is a measurable improvement in cycle time and repeatability for production runs. Clear mechanical interface and geometry for straightforward integration The insert is supplied in a square form with a 0.8 mm corner radius, a standard 12 mm size and a 4.76 mm thickness, all of which ensure mechanical stability in the clamped assembly. The insert features a cylindrical hole with a single-side countersink (40°–60°) for positive seating and secure clamping; the 15° clearance angle and 90° cutting angle match many common milling body designs. These defined geometric parameters make it straightforward to check compatibility: the seating, geometry and milling body must match technically to realise the full performance potential. Practical use and material suitability for everyday milling Designed for general milling tasks, the insert is suitable for plan, shoulder, slot, high-feed and contour milling depending on the assigned tool family. The uncoated carbide composition favours operations where controlled chip formation and low cutting forces are priorities rather than extreme abrasion resistance. Typical applications include machining softer steels, castings and mixed batches where predictable chip flow and low cutting energy help reduce tool wear and machine stress. For more demanding abrasion conditions a coated grade may be preferable, but this grade balances economical performance and easy chip control. If any uncertainty remains about matching this insert to a specific milling body or to verify its fitment in a given tool family, technical advice is available; supplementary dimensions and compatibility checks can be provided on request via Metav Werkzeuge. Email technical queries to info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Contact Metav Werkzeuge to confirm compatibility with existing milling bodies and secure original Tungaloy SDMW120408 UX30 indexable inserts for efficient production Technical data Article number: 6806269 SKU: 6806269-Tungaloy Manufacturer SKU: TUN6806269 Model series: Milling indexable inserts Application: Milling Key dimensions Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 15° Cutting angle: 90° Design & features Grade: UX30 (uncoated carbide) Shape: square Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: none Typical use: plan, shoulder, slot, high-feed and contour milling FAQ What operations is this insert intended for? The SDMW120408 UX30 indexable insert is intended for plan, shoulder, slot, high-feed and contour milling depending on the assigned milling body and tool family. How does the UX30 grade affect performance? The UX30 uncoated carbide provides a sharp cutting edge and promotes good chip formation, which helps to reduce cutting forces and supports stable milling cycles. Which geometric details ensure proper clamping and seating? The square form, 12 mm size, 0.8 mm corner radius and the cylindrical hole with single-side countersink ensure secure seating and reliable clamping when the milling body is technically compatible with the insert. Is this insert suitable for heavy-duty, abrasive conditions? The SDMW120408 UX30 is optimised for low cutting forces and controlled chip flow; for highly abrasive operations, a coated or a wear-resistant grade may be more appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDNC N2020K Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, carbide construction, and secure fastenings for consistent turning performance; order the insert directly via Metav Werkzeuge or ask our consultants for holder compatibility and mounting advice. SDNC N2020K square ISO turning insert, 15° clearance, with hole — Tungaloy SDNCN2020K is an ISO-indexed turning insert designed for external and internal turning applications; it features a square form with a 90° included angle and a cylindrical hole with double-sided countersink for secure clamping. ISO indexable insert for turning Square form with 90° included angle 15° clearance angle for reliable seating 2.38 mm plate thickness for rigidity Cylindrical hole with double countersink Reliable seating and repeatable clamping for production use The ISO-standard geometry ensures the insert seats consistently in a matching holder, which is essential for repeatable part quality in batch production. Made from carbide, the cutting element provides the hardness needed for sustained cutting and contributes to predictable wear behaviour. The square plate form with a 90° included angle supports perpendicular approaches and simplifies toolpath planning for many turning operations. Because compatibility depends on form, 15° clearance, tolerance class, fastening and thickness, selecting a matching clamping set or holder is decisive for process stability and is emphasised in the system description. Rigidity and cutting stability for clean surfaces A plate thickness of 2.38 mm increases rigidity at the cutting edge and reduces vibration in interrupted cuts, which benefits surface finish and dimensional control. The absence of an integrated chipbreaker means the insert is suited where a specific chip control geometry is chosen separately; selecting an appropriate chip-control solution according to workpiece material and machining parameters supports efficient chip evacuation. In routine turning tasks — both roughing and finishing passes — the combination of carbide durability and robust plate geometry helps maintain consistent cycle times and tool life. Secure fastening and flexible holder compatibility to reduce setup time The cylindrical hole with double-sided countersink (70°–90°) enables a secure and centred mount, improving resistance to axial and radial forces during heavy cuts. As the insert is ISO-compatible, it integrates into standard tool systems comprising a matching external holder or boring bar, a backing pad or clamping set, and retaining screws. The system approach reduces inventory complexity: once holders and clamping kits are specified to the insert’s form, clearance and tolerance class, changeovers become faster and setup reliability improves, supporting continuous production demands. Contact Metav Werkzeuge for tailored advice on holder selection and compatibility for this Tungaloy turning insert, and request assistance with mounting dimensions or batch supply from info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6806280 Manufacturer SKU: TUN6806280 SKU: 6806280-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SDNCN2020K Material: Carbide Core technical data Thickness: 2.38 mm Clearance angle: 15° Included angle: 90° Size designation: N2 Hole style: Cylindrical hole + double-sided countersink (70°–90°) Special features ISO-standard indexable turning insert Square plate form No chipbreaker Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness Typical application: external and internal turning FAQ What workpiece materials can this insert machine effectively? The insert is made of carbide and is suitable for a wide range of materials when paired with the correct grade and cutting parameters; SDNCN2020K is designed for general turning tasks across common steels and alloyed materials when the matching grade is selected. How does the hole and countersink affect clamping reliability? The cylindrical hole with double-sided countersink (70°–90°) on the SDNCN2020K ensures centred clamping and improved resistance to axial load, which reduces movement in heavy cuts and enhances repeatability. Is a chipbreaker included with this insert? This insert is supplied without a chipbreaker, allowing selection of a separate chip-control geometry or external chip-control measures tailored to the workpiece material and cutting strategy. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert integrates with standard ISO turning holders and boring bars specified for N2 square plates and a 15° clearance. What system components are recommended when ordering for production? Order matching external holders or boring bars, a backing pad or clamping set, and replacement screws alongside the SDNCN2020K to ensure correct seating and quick changeover in production setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDNN 1504ZD AH120 Wendeplatten - Tungaloy
Take advantage of the combination of high process reliability, a wear-resistant PVD-coated carbide grade and precise geometry for consistent milling results. The secure square design with a 90° cutting edge and 15° relief ensures stable clamping and durable performance in a variety of milling tasks. Order directly via Metav Werkzeuge or consult our specialists for application guidance. SDNN 1504ZD AH120 – Tungaloy indexable insert for milling, square 15 mm, 15° relief SDNN1504ZD AH120 is a square indexable insert designed for milling applications, offering a robust PVD-coated carbide grade for stable cutting and reduced tool changes PVD-coated carbide grade AH120 Square 15 mm insert, 90° cutting edge 4.76 mm plate thickness for stable clamping No hole and chipbreaker-free geometry Consistent material removal and higher process reliability The PVD-coated carbide grade AH120 delivers wear resistance and sustained edge stability, which directly improves cycle times and reduces rework. As a precision milling insert it enables a reliable cutting action across repeated passes, translating into predictable production output. The combination of the coating and the carbide substrate keeps the cutting edge sharper for longer, reducing the frequency of index changes and supporting uninterrupted workflows in machining centres and production lines. Seamless integration into Tungaloy milling systems for reduced downtime Designed for use within Tungaloy milling assemblies, the insert requires matching seat geometry and clamping hardware to function optimally. The system-oriented approach—comprising the milling body, insert and clamp screw—ensures secure retention and repeatable positioning. For manufacturers this means simpler inventory management and fewer setup adjustments, as the insert suits typical operations such as face, shoulder, slot, high-feed and contour milling depending on the assigned cutter family. Durable grade and chipping resistance for demanding operations The combination of a carbide substrate with a PVD coating gives the insert enhanced resistance to adhesive and abrasive wear while supporting a sharp cutting edge required for fine surface finishes. The selected grade is formulated to resist edge breakout under moderate-interrupted cuts, providing confidence when machining mixed batches or variable workpiece surfaces. The robust cutting edge behaviour contributes to longer tool life and consistent part quality across production runs. Clear specifications for reliable handling and tool selection The square format with a 15 mm side and a 4.76 mm plate thickness provides a compact yet stable cutting element that fits standard square pockets. The 15° free angle and the 90° included angle create a neutral geometry suited to general milling tasks, while the absence of a hole and chipbreaker indicates a design optimised for specific clamping systems and chip evacuation strategies. These concise specifications make tool selection straightforward and help maintenance teams plan insert rotation and stock levels efficiently. For precise matching of Tungaloy milling bodies, tool recommendations and technical queries about the SDNN1504ZD AH120 insert, please contact Metav Werkzeuge — specialists are available by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6819093 Manufacturer SKU: TUN6819093 SKU: 6819093-Tungaloy Model series: Milling indexable inserts Designation: SDNN1504ZD Grade: AH120 Material: Carbide Application: Milling Facts Plate size: 15 mm Plate thickness: 4.76 mm Relief angle: 15° Included angle: 90° Hole: without hole Chipbreaker: without chipbreaker Special features PVD-coated carbide for improved wear resistance Square geometry for 90° cutting edges Suitable for face, shoulder, slot, high-feed and contour milling depending on cutter family System build: milling body, indexable insert, clamp screw and optional shim Robust edge for process security and reduced breakout FAQ What milling operations is this insert suitable for? The SDNN1504ZD AH120 insert is intended for face, shoulder, slot, high-feed and contour milling, depending on the associated cutter family and machine setup. Which cutter bodies are compatible with this insert? Compatibility requires matching the seat, geometry and clamping concept of the Tungaloy milling system; the insert fits bodies designed for square SDNN-type inserts with a 15 mm size. What are the key benefits of the AH120 grade? The AH120 PVD-coated carbide grade offers enhanced wear resistance and chipping protection, increasing edge life and maintaining process reliability during milling. Does the insert include a chipbreaker or mounting hole? This variant is supplied without a chipbreaker and without a hole, designed for clamping systems that rely on a plain seat and screw retention. How does the PVD coating affect performance? A PVD coating reduces adhesive wear and improves thermal stability at the cutting edge, which helps to sustain surface finish and extend tool life under typical milling conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDNN 1504ZD AH140 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH140, precise square 15 mm geometry and clear system compatibility for steady production and reduced downtime. Order the insert directly via Metav Werkzeuge or consult the technical team for matching milling bodies and clamping options. SDNN 1504ZD AH140 – indexable milling insert for milling by Tungaloy The SDNN 1504ZD AH140 is an indexable milling insert engineered for face, shoulder, slot, high-feed and contour milling in compatible Tungaloy milling systems. PVD-coated carbide AH140 for wear resistance Square 15 mm shape with 15° relief Designed for Tungaloy milling systems Without hole—suitable for clamped assemblies Longer tool life through PVD-coated carbide technology The combination of PVD-coated carbide and the AH140 grade ensures wear resistance and reliable edge stability in a wide range of milling tasks. The PVD layer reduces abrasive wear and supports a consistently sharp edge, which translates into longer service intervals and fewer tool changes. For production environments where process security and predictable component quality are priorities, this insert reduces unplanned stoppages and contributes to efficient cycle times. Precision geometry that adapts to versatile milling operations The square geometry with a nominal size of 15 mm and a 15° relief angle provides stable cutting performance across typical milling routines. A plate thickness of 4.76 mm gives the insert sufficient rigidity for face and shoulder milling while remaining suitable for slot and contour operations when matched to the correct cutter body. The insert is supplied without a hole, intended for clamped assemblies; therefore, insert seat, geometry and milling body must be technically compatible to achieve the expected cutting behaviour. System-oriented design for simplified tool management Delivered for use in Tungaloy milling systems, the insert forms part of a tool system comprising the milling body, indexable insert, clamping screw and, where applicable, a shim. This system approach simplifies inventory control and replacement procedures, supporting stable chip formation and consistent surface quality. The wear- and breakage-resistant character of the grade contributes to predictable tool life, improving throughput and helping production planners forecast tooling costs more accurately. For process-critical milling applications, specify the Tungaloy SDNN 1504ZD AH140 indexable insert and contact Metav Werkzeuge for application matching or ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6820701 SKU: 6820701-Tungaloy Manufacturer SKU: TUN6820701 Manufacturer: Tungaloy Model series: Fräswendeschneidplatten Material: Carbide ISO designation: SDNN1504ZD Grade: AH140 Application: Milling Facts Insert size: 15 mm Thickness: 4.76 mm Relief angle: 15° Main angle: 90° Mounting: without hole Special features PVD-coated carbide, grade AH140 Square insert form No chipbreaker Designed for face, shoulder, slot, high-feed and contour milling Suitable for Tungaloy milling systems Requires compatible insert seat and milling body Wear- and breakage-resistant with sharp cutting edge FAQ What milling operations is this insert intended for? The SDNN 1504ZD AH140 indexable milling insert is intended for face, shoulder, slot, high-feed and contour milling in compatible Tungaloy milling systems. What does the AH140 grade offer? AH140 is a PVD-coated carbide grade formulated for wear and breakage resistance, delivering a sharp cutting edge and reliable performance during milling. How must the insert be mounted in the milling cutter? The insert is designed for clamped mounting (supplied without hole); insert seat, geometry and milling body must be technically compatible to ensure correct clamping and cutting behaviour. Is the insert suitable for heavy-duty milling? The combination of PVD coating and the AH140 grade provides improved wear resistance and edge stability, making the insert suitable for demanding milling tasks when fitted in an appropriate tool body. Can the SDNN 1504ZD AH140 be used in non-Tungaloy holders? The insert is designed for Tungaloy milling systems; use in other holders requires verification that seat geometry and clamping method match the insert specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDNN 1504ZD T1115 Wendeplatten - Tungaloy
Take advantage of the combination of Tungaloy T1115 wear resistance and a robust carbide substrate for stable cutting performance; designed for straightforward integration into Tungaloy milling systems via standard clamping components. Order or request application advice from Metav Werkzeuge for a reliable production solution. SDNN 1504ZD T1115 SDNN1504ZD – indexable milling insert by Tungaloy A SDNN1504ZD T1115 indexable insert designed for Tungaloy milling systems; suitable for face, shoulder, slot, high-feed and contour milling where matching insert seat, geometry and cutter body are required. Tungaloy grade T1115 for versatile cutting Square insert, 15 mm size, 15° relief Carbide substrate for robust edge stability Engineered for stable, predictable milling productivity The T1115 cutting grade combines wear resistance and toughness to deliver consistent cutting behaviour across mixed production runs. Manufactured on a carbide substrate, the geometry emphasises edge stability which reduces unexpected wear and contributes to extended tool life and fewer changeovers. For production planning this means more predictable cycle times and a clearer cost-per-part calculation, as the insert supports controlled chip formation and improved process reliability in standard milling tasks. Practical design that simplifies tooling choices A square plate form with a 15 mm size and 4.76 mm plate thickness offers multiple indexed cutting edges, enabling cost-efficient edge rotation and repeatable performance. The 15° relief is optimised for general milling envelopes and, together with the absence of a central hole, requires the correct clamping screw and seat geometry on the cutter body for secure fixation. These characteristics make the component straightforward to specify in bills of materials and compatible tool lists, reducing administrative complexity and downtime during tool changes. Wide application range within compatible milling systems Intended for use in Tungaloy milling systems, the insert is part of a system build that includes the cutter body, clamping screw and, where appropriate, a shim. Typical operations cover planing, shoulder, slot, high-feed and contour milling depending on the assigned tool family, offering flexibility on the shop floor. Where process stability and repeatable surface quality are priorities, the combination of insert geometry and the T1115 material provides a balanced solution for both continuous production and small-batch runs. For application advice or to secure SDNN1504ZD inserts with Tungaloy’s T1115 grade, contact Metav Werkzeuge for tailored recommendations and delivery options — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6863791 Manufacturer SKU: TUN6863791 Designation: SDNN1504ZD T1115 Material: carbide Model series: indexable milling inserts Facts Insert size: 15 mm Plate thickness: 4.76 mm Cutting angle: 90° Relief angle: 15° Hole: without hole Special features Grade: T1115 (Tungaloy) Square plate form No chipbreaker For milling applications (face, shoulder, slot, high-feed, contour) Compatible with Tungaloy milling systems System components: cutter body, clamping screw, possible shim FAQ What materials is this insert suitable for? The SDNN1504ZD T1115 insert is a carbide grade optimised for general milling applications; its balanced properties suit a broad range of workpiece materials when used within the recommended Tungaloy milling systems. How is the insert secured in the cutter body? The SDNN1504ZD is designed for clamping with the appropriate clamping screw and seat geometry; the insert has no central hole and requires the matching cutter body and fastening hardware for secure fixation. How many cutting edges are available per insert? The square plate form provides multiple indexed edges; rotating to a fresh edge on the SDNN1504ZD restores cutting performance and supports economical tool usage. Is a chipbreaker integrated into the insert? This grade is supplied without a chipbreaker; chip control is achieved through the combination of insert geometry, grade characteristics and cutter body design. Which operations are recommended for this insert? Typical uses include face, shoulder, slot, high-feed and contour milling when the insert is paired with the correct tool family and cutter body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDNN 1504ZD T3130 Wendeplatten - Tungaloy
Benefit from a combination of T3130 grade cemented carbide, a 15° relief angle and a compact 15 mm square form for reliable, productive milling. The design supports stable cutting-edge performance and repeatable tool changes — Order the SDNN1504ZD T3130 milling insert directly via Metav Werkzeuge or ask our consultants if needed. SDNN 1504ZD T3130 milling insert by Tungaloy A SDNN1504ZD T3130 milling insert engineered for Tungaloy milling systems, intended for face, shoulder, high‑feed and contour milling when used with a matching tool body. Square 15 mm insert for versatile milling T3130 carbide grade for balanced wear resistance 15° relief angle for stable cutting action Compatible with Tungaloy milling systems Consistent performance that keeps production moving The T3130 grade delivers a carefully balanced combination of wear resistance and toughness, making it suitable where both tool life and edge stability matter. Manufactured from cemented carbide, the insert maintains cutting-edge geometry under interrupted and continuous cuts, so cycle times remain stable and regrind intervals are extended. For manufacturers seeking predictable output, this translates into reduced tool changes and fewer unplanned stops, supporting higher overall equipment effectiveness. Fast, repeatable integration into Tungaloy tool systems Designed as part of Tungaloy's insert family, the item complements matching tool bodies when the seat, geometry and clamping system are compatible. The 15 mm square format and 4.76 mm thickness offer a compact, robust seating for quick indexation, while the absence of a centre hole simplifies the mounting concept where applicable. Clear component standardisation reduces setup time and ensures repeatable tool positioning, which benefits serial production and short‑run machining alike. Application flexibility with reliable surface outcomes The insert’s geometry supports face, shoulder, slot, high‑feed and contour milling depending on the chosen cutter family. A 90° principal cutting angle combined with the 15° relief angle provides a balanced load on the cutting edge, assisting in chip control and consistent force distribution. The result is a more uniform surface finish and predictable tool behaviour across different steels and alloyed materials, enabling process planners to standardise parameters for comparable workpieces. Contact Metav Werkzeuge to confirm compatibility with existing tool bodies, request technical advice on using Tungaloy inserts or secure original SDNN 1504ZD T3130 stock — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6853836 Manufacturer SKU: TUN6853836 SKU: 6853836-Tungaloy Model series: Milling indexable inserts Dimensions / core data Insert size: 15 mm Thickness: 4.76 mm Relief angle: 15° Cutting angle: 90° Shape: square Materials / special features Material: cemented carbide Grade: T3130 Cutting material type: Tungaloy grade Hole: without hole Chipbreaker: none Application: Milling Insert designation: SDNN1504ZD FAQ What materials is this insert designed to machine? The SDNN1504ZD T3130 insert is a general‑purpose Tungaloy grade aimed at a broad range of materials suited to milling; process parameters should be selected according to the workpiece material and cutter family. Is the insert compatible with all Tungaloy milling cutters? Compatibility requires matching the insert seat, clamping geometry and cutter family; the SDNN1504ZD form fits Tungaloy systems that accept SDNN‑style square inserts. How is chip control affected by the insert geometry? With no dedicated chipbreaker fitted, chip behaviour depends on the cutter body and cutting parameters; the insert’s geometry and T3130 grade support stable cutting edges for consistent chip formation under recommended conditions. Can the insert be indexed to present a fresh cutting edge? Yes, the square design allows multiple indexes; correct seating and torque on the clamping screw ensure repeatable positioning and reliable edge engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com