SNGA 120412 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO‑compliant geometry, the TH10 uncoated cemented carbide grade and the proven square form to ensure stable, low‑force turning and consistently clean surface finishes; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and supply options. SNGA 120412 TH10 indexable insert for Turning — Tungaloy SNGA 120412 TH10 indexable insert for ISO‑standard turning, optimised for non‑ferrous materials and precision finishing ISO‑standard indexable geometry Uncoated cemented carbide grade TH10 Square form, 90° cutting angle Cylindrical hole; compatible with holders Predictable ISO compatibility that reduces setup time The insert follows ISO dimensions and tolerance conventions, which simplifies the matching process with standard turning holders and tool posts. Compatibility is determined by form, relief angle, tolerance class, mounting type, size and thickness, so planning and procurement become more predictable. This standardisation reduces machine downtime and supports repeatable set‑ups across production batches, helping maintain a steady production flow with fewer trial cuts. Sharp, low‑force cutting for clean finishes on non‑ferrous components The uncoated cemented carbide grade TH10 delivers a sharp cutting edge and is formulated as a universal grade for non‑ferrous materials and operations that benefit from low cutting forces. The absence of a chipbreaker results in a continuous edge geometry that supports fine finishing passes and minimal surface disturbance. For workshops seeking reduced cutting loads and improved surface quality in finishing or light turning, this grade provides an effective balance between edge sharpness and tool life. Robust square geometry for repeatable accuracy and flexible use The square form with a 90° cutting angle and a 1.2 mm corner radius offers a reliable profile for both external and internal turning tasks. The insert’s cylindrical hole and a plate thickness of 4.76 mm provide secure clamping when used with the appropriate backing or clamping set, ensuring stable cutting conditions and dimensional consistency. Designed as part of an ISO‑based insert system, the configuration supports rapid indexation and straightforward replacement with matching screws and holders, making inventory management and changeover routines more efficient. For tailored advice on holder compatibility, application suitability and available stock of Tungaloy indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical guidance and delivery options. Technical Data Manufacturer article number: 6806474 Manufacturer SKU: TUN6806474 Stock SKU: 6806474-Tungaloy ISO designation: SNGA120412 Grade: TH10 Material: cemented carbide (uncoated) Facts Corner radius: 1.2 mm Plate size: 12 mm Plate thickness: 4.76 mm Cutting angle: 90° Relief angle: 0° Hole: with cylindrical hole Special features Geometry: square Chipbreaker: none Application: turning Series: ISO indexable turning inserts System components: insert, holder, backing/clamping set, replacement screws FAQ Which materials is the SNGA 120412 TH10 best suited for? The TH10 grade is an uncoated cemented carbide formulated as a sharp universal grade, especially suited to non‑ferrous materials and applications that require low cutting forces and a clean surface finish. Can this insert be used for finishing passes? Yes, the sharp edge geometry of the SNGA 120412 TH10 insert and the absence of a chipbreaker make it well suited to finishing and light cutting operations where surface quality is a priority. How is holder compatibility determined for this insert? Compatibility depends on the insert’s form, relief angle, tolerance class, mounting style, size and thickness; these parameters ensure correct seating in the holder and secure clamping. Does this insert include a chipbreaker geometry? This variant is supplied without a chipbreaker, offering a continuous cutting edge for low‑force and fine finishing applications. What are the identifying numbers for ordering and stock management? Use the manufacturer article number 6806474, the manufacturer SKU TUN6806474, or the stock SKU 6806474-Tungaloy for ordering and inventory references. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120416 FX105 Wendeplatten - Tungaloy
Benefit from the SNGA120416’s combination of a robust FX105 carbide grade, 90° geometry and a 1.6 mm corner radius to ensure consistent edge stability and reliable turning performance in both external and internal operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNGA120416 FX105 Tungaloy turning insert — ISO square insert for turning The SNGA120416 FX105 is an ISO‑standard square turning insert designed for versatile external and internal turning, offering a balance of wear resistance and cutting‑edge stability. ISO‑standard square insert for turning FX105 grade for wear resistance and toughness 90° geometry for versatile cutting 1.6 mm corner radius for robust edges Reliable productivity through optimised carbide grade and geometry The insert uses a Tungaloy FX105 carbide formulation that combines wear resistance with sufficient toughness to withstand interrupted cuts and variable workpiece conditions. As an ISO‑standard component, the insert delivers predictable performance and easy interchangeability within established holders and tool systems. This technical choice reduces tool change frequency and contributes to steady machining throughput, offering a clear efficiency advantage for serial turning operations. Practical mounting, compatibility and cutting‑edge design Compatibility with tool holders is defined by the insert’s square form, 90° geometry, 0° clearance angle, tolerance class, clamping arrangement and physical dimensions. The part features a cylindrical hole for secure fastening and a corner radius of 1.6 mm, which provides a compromise between edge strength and achievable surface finish. The insert thickness of 4.76 mm and a nominal size of 12 mm ensure mechanical stability during heavy cuts while remaining suitable for many common external and internal turning tasks. Application guidance and process security for production environments For consistent chip control and surface quality, the grade and any chipbreaker selection should be matched to the workpiece material and the machining stability of the setup. When paired with the correct chipbreaker and holder, this insert supports predictable tool life and contributes to improved process security. The ISO conformity and the robust edge properties mean fewer unexpected interruptions and a more repeatable production cycle, which is particularly valuable in small‑batch and high‑mix workshops. For tailored advice on using the SNGA120416 FX105 Tungaloy turning insert in specific turning applications, contact Metav Werkzeuge for technical consultation and supply — eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930 Technical Data Article number: 6806477 Manufacturer SKU: TUN6806477 Item label: SNGA120416 FX105 Tungaloy‑Wendeplatte Manufacturer: Tungaloy Facts Corner radius: 1.6 mm Geometry angle: 90° Clearance angle: 0° Thickness: 4.76 mm Size: 12 mm Special features Grade: FX105 (Tungaloy carbide) Material: carbide ISO‑standard turning insert series Square plate with cylindrical hole No chipbreaker fitted Compatibility determined by form, clearance angle, tolerance, clamping, size and thickness FAQ What turning operations is this insert suited for? The SNGA120416 FX105 Tungaloy turning insert is intended for both external and internal turning operations and suits a broad range of common turning tasks when paired with a suitable holder and chipbreaker. How does the FX105 grade influence tool life? The FX105 grade provides a balance of wear resistance and toughness, which helps the SNGA120416 maintain cutting‑edge stability and extend effective tool life under varying cutting conditions. Can the insert be clamped in standard ISO holders? Yes; the insert’s ISO standard form, square shape and cylindrical hole allow secure mounting in compatible ISO‑type external holders and boring bars designed for this insert family. What surface finish can be expected with a 1.6 mm corner radius? A 1.6 mm corner radius on the SNGA120416 generally supports improved edge strength with a good compromise between surface finish and robustness; finer finishes may require a smaller radius or adjusted cutting parameters. Is a chipbreaker included with the insert? This variant is supplied without a chipbreaker; chip control should be achieved by selecting an appropriate chipbreaker type matched to the workpiece material and machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120416 LX10 Wendeplatten - Tungaloy
Combining an ISO‑standard SNGA form, Tungaloy LX10 wear resistance and a 1.6 mm corner radius, this indexable insert delivers dependable edge life and consistent performance for general turning tasks; order the SNGA120416 LX10 insert directly via Metav Werkzeuge or ask our consultants if needed. SNGA 120416 LX10 ISO‑standard turning insert — Tungaloy, square 12 mm, 90° SNGA 120416 LX10 is a square ISO‑standard indexable insert designed for external and internal turning, offering a stable cutting edge for a wide range of routine machining tasks ISO standard SNGA form, consistent fit LX10 grade for wear resistance and toughness Square 12 mm insert, 1.6 mm corner radius Predictable performance through standardised geometry The SNGA form follows ISO‑standard geometry, which simplifies tool selection and ensures consistent seating in compatible tool holders. The square outline with a cylindrical hole and defined dimensions allows straightforward replacement without time‑consuming adjustments, reducing setup variability and machine idle time. Because form, clearance angle and tolerance class determine compatibility, planners can rely on repeatable results when the correct holder and clamping set are used. This standardisation supports higher machine utilisation and predictable process stability. Grade and edge stability engineered for long tool life The insert is produced in Tungaloy’s LX10 grade and manufactured from carbide, balancing wear resistance with toughness to maintain cutting‑edge integrity under intermittent or continuous cuts. The chosen composition is intended to resist flank wear while preserving edge strength in general turning operations. As a consequence, the grade minimises unexpected breakdowns and contributes to consistent surface finish, making it suitable for production environments where repeatability is essential. Compact design that supports reliable cutting mechanics Key dimensions such as the 12 mm plate size, 1.6 mm corner radius and 4.76 mm thickness define the mechanical behaviour during turning. The moderate corner radius helps to distribute cutting forces and reduces local stress concentration on the edge, improving edge life on interrupted cuts and shoulder turning. The 90° included angle and square shape permit multiple indexing positions, extending usable tool life and reducing the number of spare items needed in stock. Practical selection and system integration This insert is supplied without a chipbreaker, allowing selection of chip control to suit the workpiece and machining conditions. Compatibility within a turning system depends on form, clearance angle (0°), tolerance class, clamping and plate thickness; the system typically comprises a matching external holder or boring bar plus shim/clamp set and replacement screws. For stable, productive cutting, pair the insert with the appropriate clamping components and choose a chipbreaker or geometry optimised for the specific material and cutting strategy. Contact Metav Werkzeuge for application advice and to secure the SNGA 120416 LX10 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852103 Manufacturer SKU: TUN6852103 SKU: 6852103-Tungaloy Model series: ISO‑standard indexable turning inserts Designation: SNGA120416 LX10 Facts Corner radius: 1.6 mm Insert size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Included angle: 90° Hole style: cylindrical Manufacturer article number: 6852103 Special features Material: carbide Grade: LX10 (Tungaloy) ISO‑standard SNGA form Square shape with cylindrical hole No chipbreaker Intended use: external and internal turning Compatibility determined by form, clearance, tolerance class, fixing, size and thickness System components: holder, shim/clamp set and replacement screws FAQ What turning operations is this insert intended for? The SNGA120416 LX10 indexable insert by Tungaloy is intended for both external and internal turning operations and suits general turning tasks where a square, ISO‑standard plate is required. How does the LX10 grade affect cutting performance? The LX10 grade on this Tungaloy insert improves wear resistance and maintains cutting‑edge stability, which helps prolong tool life and support consistent surface quality during sustained turning. Which dimensions are essential when selecting a holder? Key dimensions for selection are the 12 mm insert size, 4.76 mm thickness, 1.6 mm corner radius and the presence of a cylindrical hole; the SKU for reference is 6852103-Tungaloy. Is a chipbreaker included on the insert? The SNGA120416 LX10 insert is supplied without a chipbreaker, allowing the user to choose an appropriate chip control geometry for the workpiece material and cutting strategy. How to verify compatibility with existing clamping systems? Compatibility is verified by matching the SNGA form, clearance angle (0°), tolerance class, fixing method, size and thickness to the existing holder; if in doubt, consult Metav Werkzeuge for confirmation using article number 6852103. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGA 120416 LX11 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant LX11 grade and ISO‑standard geometry for predictable tool life and consistent part quality; the robust cemented carbide construction and 90° square form support stable external and internal turning. Order supply or technical advice via Metav Werkzeuge for rapid integration into existing machining cells. SNGA 120416 LX11 — Indexable turning insert, Tungaloy, for turning The SNGA 120416 LX11 is an ISO‑standard indexable turning insert engineered for external and internal turning, offering a square 90° geometry and a 1.6 mm corner radius for reliable edge stability. ISO‑standard compatibility LX11 carbide grade for wear resistance Square 90° insert for stable turning 1.6 mm corner radius for fine finishes Enhanced performance through material and grade The insert combines a Tungaloy LX11 grade with cemented carbide substrate to deliver a balance of wear resistance and toughness, which reduces flank wear under interrupted or continuous cuts. This material pairing improves productivity by extending tool life and maintaining dimensional accuracy over longer component runs. The LX11 grade complements the insert geometry to provide stable cutting edges, minimizing the need for frequent indexing and lowering per‑part tooling cost. Reliable fit and secure mounting for process stability As an ISO‑standardised insert, compatibility with holders is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The square form with a cylindrical hole supports positive clamping in standard turn holders and boring bars, ensuring repeatable seating and torque transmission. Clear specification of the 0° clearance angle, 4.76 mm thickness and 12 mm nominal size aids in selecting the correct holder and clamping set for stable machining environments. Application guidance for turning tasks Designed for general turning operations, the insert is suitable for both external and internal cuts where a 90° engagement and a 1.6 mm corner radius are appropriate. The item is supplied without a chipbreaker, so selection of cutting parameters and, where needed, an appropriate chip control solution should be matched to the workpiece material and machining strategy. The combination of edge stability and grade toughness supports finishing passes and semi‑roughing where tool life and surface integrity are priorities. Proven supply and specification for shop integration Specification clarity — including ISO designation, insert geometry and grade — simplifies tool planning and inventory management. The manufacturer article and SKU ensure traceability for procurement and quality checks. For complex component programmes, the ISO conformity and robust carbide construction help reduce process variation and support consistent batch results across shifts. For productive turning with Tungaloy’s LX11 grade and ISO geometry, contact Metav Werkzeuge for application advice, availability or to request tailored order information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6806478 Manufacturer SKU: TUN6806478 Model series: ISO indexable turning inserts Material: cemented carbide Grade/coating: LX11 Shape: square Included angle: 90° Corner radius: 1.6 mm Clearance angle: 0° Thickness: 4.76 mm Size: 12 mm Hole: with hole (cylindrical hole) Numerical data Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Included angle: 90° Clearance angle: 0° Manufacturer article number: 6806478 Design features ISO‑standardised insert Cylindrical hole for positive clamping No chipbreaker Compatible with ISO holders and boring bars Suitable for external and internal turning LX11 grade for wear resistance and edge stability FAQ What is the intended application for this insert? The SNGA 120416 LX11 is specified for turning operations, covering both external and internal turning where a square 90° insert and a 1.6 mm corner radius are required. Is a chipbreaker included with the insert? No, the insert is supplied without a chipbreaker, so chip control should be provided by toolpath strategy or a matched chip control solution when necessary. How is the insert secured in the holder? The indexable insert uses a cylindrical hole for positive clamping and is compatible with ISO‑standard holders and clamping sets that match the insert form, size and thickness. Which geometric and size data define the insert? Key dimensions are 12 mm nominal size, 4.76 mm thickness, 90° included angle and 1.6 mm corner radius; the clearance angle is 0°. What are the identifying numbers for ordering and traceability? Ordering and traceability use article number 6806478 and manufacturer SKU TUN6806478 for this Tungaloy indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090302 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of a cermet NS520 grade for superior surface finish, a fine 0.2 mm nose radius for precise finishing, and ISO conformity for straightforward toolholder compatibility. Order or request technical advice via Metav Werkzeuge to ensure the insert matches the machining stability and chipbreaker required. SNGG 090302 NS520 — ISO turning insert for finishing (Tungaloy) SNGG090302-01 NS520 is an ISO-standard square turning insert designed for finish to light machining of steel components Cermet grade NS520 for superb surface finish 0.2 mm nose radius for fine finishing ISO square insert 09, 90° cutting geometry Cylindrical hole, 3.18 mm plate thickness Consistent finishing and improved surface quality The combination of the NS520 cermet grade and the fine 0.2 mm nose radius delivers measurable improvements in surface integrity and dimensional accuracy for finishing operations. Cermet materials excel in adhesion and maintain a stable cutting edge, which produces a uniform wear pattern and reduces the need for rework. For components where surface specification and repeatability matter, this insert supports shorter downstream processing and more predictable results. Productivity through predictable wear and process stability Designed as a finish-oriented solution, the insert provides repeatable performance across batch runs thanks to the wear-resistant cermet and the square 09 geometry at a 90° approach angle. The small nose radius balances contact area and edge strength to maintain good surface finish without compromising edge life. In practical terms, the result is less scrap and fewer tool changes during long production runs, improving throughput and machine availability. ISO compatibility and practical selection guidance The insert adheres to ISO norms, so compatibility is determined by form, clearance angle, tolerance class, fixation method, size and thickness. The cylindrical hole ensures secure clamping; a plate thickness of 3.18 mm supports stable seating in standard holders. Select the chipbreaker and the exact grade based on workpiece material, machining stability and desired surface finish—NS520 is optimised for steel finishing. For mixed or unstable setups, choose a chipbreaker that aids controlled chip formation and reduces vibration. Contact Metav Werkzeuge for tailored application advice and availability for the Tungaloy SNGG090302-01 NS520 turning insert Technical data Article number: 6806479 Manufacturer article number: 6806479 Manufacturer SKU: TUN6806479 SKU: 6806479-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Plate size: 09 Plate form: square Plate thickness: 3.18 mm Nose radius: 0.2 mm Clearance angle: 0° Cutting angle: 90° ISO code: 090302 Special features Material: carbide Grade/coating: NS520 (cermet or coated cermet) Application: turning (finishing to light machining of steel) Hole style: cylindrical hole (with hole) Chipbreaker: 01 ISO-standard indexable insert FAQ Which materials is this insert suited for? The SNGG090302-01 NS520 insert from Tungaloy is optimised for finishing and light machining of steel, offering improved surface quality and consistent wear. Which operations are recommended for this insert? This indexable insert is intended primarily for external and internal turning operations with an emphasis on finishing passes and dimensionally critical work. How does the 0.2 mm nose radius affect performance? A 0.2 mm nose radius balances a fine surface finish with sufficient edge strength; the SNGG090302-01 NS520 produces smooth surfaces while maintaining acceptable tool life for finishing cuts. What should be considered when selecting a chipbreaker? Choose a chipbreaker that matches the workpiece material, cutting parameters and machine stability—this ensures controlled chip formation and protects the cutting edge of the Tungaloy insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO sizing; compatibility depends on form, clearance angle, tolerance class, fixation and plate thickness—verify holder specifications against the ISO code 090302. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090302 NS9530 Wendeplatten - Tungaloy
SNGG 090302 NS9530 — Tungaloy Wendeplatte zum Drehen SNGG090302-01 NS9530 Tungaloy-Wendeplatte für präzises Schlichten und feine Oberflächen beim Außen- und Innendrehen ISO-genormte quadratische Wendeplatte für präzises Drehen Schlichtsorte NS9530 für hohe Oberflächengüte Unbeschichtetes Cermet mit scharfer Schneidkante Mit zylindrischem Loch und 0° Freiwinkel Kompatibel zu standardaußenhaltern und bohrstangen Materialfestigkeit für langlebige Schlichtbearbeitung Die Wendeplatte basiert auf robustem Hartmetall und einem unbeschichteten Cermet-Schneidstoff, wodurch eine besonders scharfe Schneidkante erzielt wird. Diese Kombination reduziert die Schnittkräfte und ermöglicht konstante Ergebnisse beim kontinuierlichen Schnitt. Für Anwender bedeutet das weniger Nachbearbeitung und eine zuverlässige Standzeit in Schlichtoperationen. Präzision und Oberflächengüte im Fokus Für feine Oberflächen sorgt die Sorte NS9530, die speziell als Schlichtsorte für Stahl entwickelt wurde. Durch den 0° Freiwinkel und die scharfe Kante wird eine glatte Oberflächengüte erreicht, auch bei geringen Zustellungen. Wer auf hohe Maßhaltigkeit und ein feines Oberflächenbild achtet, profitiert von der stabilen Spanbildung und der Prozesssicherheit der Platte. Einfache Auswahl und verlässliche Kompatibilität Die Platte ist ISO-genormt, wodurch die Kompatibilität zu Außenhaltern und Bohrstangen über Form, Freiwinkel und Befestigung gegeben ist. Die quadratische Plattenform mit zylindrischem Loch erleichtert die Positionierung und Fixierung im Systemaufbau. Bei der Auswahl sollte auf passenden Spanbrecher und die Stabilität der Aufspannung geachtet werden, um die Vorteile der Platte voll auszuspielen. Empfehlung: Für anspruchsvolles Schlichten mit hoher Oberflächengüte empfiehlt sich die SNGG090302-01 NS9530 Wendeplatte von Tungaloy — für technische Beratung erreichen Sie uns per E‑Mail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6997803 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: SNGG090302-01 Hersteller SKU: TUN6997803 Fakten Eckenradius: 0,2 mm Plattendicke: 3,18 mm Plattengröße: 09 Winkel: 90° Besonderheiten Material: Hartmetall Sorte: NS9530 — Schlichtsorte für Stahl, hohe Oberflächengüte Schneidstofftyp: unbeschichtetes Cermet Anwendung: Drehen Freiwinkel: 0° Loch: mit Loch (zylindrisches Loch) Plattenform: quadratisch Spanbrecher: 01 ISO: 090302 (ISO-genormt) Einsatz: Außen- und Innendrehen FAQ Welche Werkstoffe bearbeitet die Platte am besten? Die SNGG090302-01 NS9530 Tungaloy-Wendeplatte ist als Schlichtsorte speziell für Stahl ausgelegt und liefert bei kontinuierlichem Schnitt beste Oberflächengüte. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die ISO-genormte Ausführung der Tungaloy Wendeplatte eignet sich für sowohl Außen- als auch Innendrehen, vorausgesetzt der Halter entspricht Form, Freiwinkel und Befestigungsanforderungen. Welche Vorteile bietet das unbeschichtete Cermet? Unbeschichtetes Cermet bietet eine sehr scharfe Schneidkante und reduziert die Schnittkräfte, was besonders beim Schlichten zu feinen Oberflächen und geringerer Nacharbeit führt. Wie beeinflusst der 0° Freiwinkel die Bearbeitung? Der 0° Freiwinkel unterstützt stabile Schnitte und sorgt in Kombination mit der scharfen Kante für gleichmäßige Oberflächen bei geringen Zustellungen. Welche Plattendicke hat die Wendeplatte? Die Plattendicke beträgt 3,18 mm, was in Kombination mit der quadratischen Form und dem zylindrischen Loch für zuverlässige Fixierung und Stabilität sorgt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNGG 090304 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of consistent edge stability, balanced wear resistance and ISO compatibility for reliable turning performance; order the SNGG090304-01 via Metav Werkzeuge or ask our consultants if needed. SNGG090304-01 SNGG 090304 GH110 indexable insert for Turning — Tungaloy A robust SNGG090304-01 GH110 indexable insert engineered for ISO-standard turning operations, offering a balanced mix of wear resistance and toughness for general turning tasks. SNGG090304-01 ISO indexable geometry GH110 Tungaloy carbide grade 0° clearance angle for stable cutting Square plate with 0.4 mm corner radius Predictable productivity through alloy and geometry The combination of a carbide substrate with the GH110 grade delivers a controlled balance between wear resistance and toughness, which results in consistent tool life and repeatable component quality. In practice, this means fewer unscheduled insert changes and more predictable cycle times on turning centres. The geometry of the plate is optimised for a reliable cutting edge; by favouring edge stability over aggressive wear removal, the insert supports steady production runs and reduced scrap rates. Fast integration into ISO turning systems Designed as an ISO-standard turning insert, the plate’s dimensions and form ensure compatibility with a wide range of holders when matching is done by form, relief angle, tolerance class, fastening and thickness. Key measured values — 3.18 mm thickness, 09 size, a 90° approach angle and a 0° clearance angle — simplify setup and ensure correct clamping behaviour. The cylindrical hole aids secure fastening and repeatable seating, reducing setup times and minimising the need for trial adjustments during tool changes. Application guidance and operational benefits Intended primarily for external and internal turning, the insert is supplied with a chipbreaker designation 01 and should be paired with a chipbreaker and grade that match the workpiece material and machine stability. The plate’s 0.4 mm corner radius provides a controlled transition for corner finishing while the square form offers four indexed cutting edges, improving cost efficiency per edge. System composition typically includes the insert, a matching external holder or bar, a shim/clip and replacement screws; choosing the right holder geometry and clamping hardware is essential for achieving the insert’s performance potential. For ordering or tailored advice on integrating the SNGG090304-01 GH110 insert into existing tool systems, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants can assist with holder compatibility and application recommendations. Technical Data Article number: 6806491 SKU: 6806491-Tungaloy Manufacturer article number: 6806491 Manufacturer: Tungaloy Facts Plate size: 09 Plate thickness: 3.18 mm Corner radius: 0.4 mm Approach angle: 90° Clearance angle: 0° Hole: with hole (cylindrical hole) Special features Carbide grade: GH110 Material: carbide Plate form: square Chipbreaker: 01 ISO series: ISO indexable turning plates Intended use: Turning Compatibility determined by: form, clearance angle, tolerance class, fastening, size, thickness FAQ What materials is the insert suitable for? The GH110 grade of the SNGG090304-01 insert is formulated to provide a balance of wear resistance and toughness; material-specific chipbreaker and process selection should be made according to the workpiece and machining stability. How is the insert clamped in the holder? Clamping relies on the plate geometry and the cylindrical hole; correct seating is achieved when the holder matches the insert form, tolerance class and thickness for secure fixation. How many cutting edges are available per insert? The square geometry provides four usable cutting edges, enabling indexed rotation to a fresh edge and improving cost efficiency per insert. Can the insert be used for finishing operations? Yes — with the 0.4 mm corner radius and the GH110 grade, the insert can deliver controlled surface finishes when paired with suitable cutting parameters and a compatible chipbreaker. Which chipbreaker should be selected? The SNGG090304-01 carries the chipbreaker designation 01; select the specific chipbreaker and cutting data based on the workpiece material and desired chip control for optimal performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 GH110 Wendeplatten - Tungaloy
Combining ISO conformity, a GH110 carbide grade and a 0.4 mm corner radius for balanced wear resistance and edge stability, this square insert delivers stable chip control and predictable machining results; order the SNGG090304-01 directly via Metav Werkzeuge or consult their specialists for tailored application guidance. SNGG090304-01 GH110 Tungaloy indexable insert — square ISO insert with 0° rake for turning The SNGG090304-01 GH110 Tungaloy insert is an ISO-standard square indexable insert for general turning, designed to provide consistent edge stability and reliable chip formation in industrial machining environments. ISO-standard square 09 insert SNGG format GH110 carbide grade for wear resistance 0.4 mm corner radius for robust edges Cylindrical hole and 0° rake for secure clamping Predictable performance for productive turning The ISO-standard geometry ensures straightforward integration into established tool systems, delivering predictable process behaviour across series production. Compatibility with external holders is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; this makes the component easy to match with existing clamping solutions. Using an ISO-format square insert simplifies inventory and reduces setup variability, which helps to maintain cycle-time consistency and lowers the risk of unexpected downtime. Long cutting life from GH110 carbide chemistry The GH110 grade is supplied by Tungaloy and is formulated to balance wear resistance and toughness, extending the period between indexings and tool changes. This material choice supports a stable cutting edge under typical turning loads, enabling longer uninterrupted runs and more predictable maintenance intervals. For operations where edge retention and repeatable surface quality matter, the combination of grade and geometry helps to sustain productivity and reduce tooling cost per part. Geometry and chip control that stabilise machining A square outline with a 0.4 mm corner radius and a defined chipbreaker 01 provides reliable chip formation and contributes directly to improved surface finish and dimensional consistency. The 0° rake and cylindrical locating hole ensure secure seating in compatible holders, reducing micro-movements that can degrade surface quality. Together, these features promote stable cutting forces and aid in achieving the required tolerances with fewer corrections, particularly in repetitive turning tasks. Easy system integration and practical handling The insert is part of a complete ISO indexable insert system that typically includes an appropriate external holder or boring bar, a support/ clamp set and replacement fastening screws. Installation and replacement are rapid when the holder geometry matches the ISO specification, so changeovers are efficient and safe. For toolroom planning, specifying the square 09 size, 3.18 mm plate thickness and the cylindrical hole will help to confirm fitment and clamping method; the standardised format also simplifies procurement and stock management. For technical application support on Tungaloy turning inserts and to confirm holder compatibility or availability, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for specialist advice and rapid confirmation Technical data Article number: 6806486 Manufacturer SKU: TUN6806486 Model designation: SNGG090304-01 GH110 Product SKU: 6806486-Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Size: 09 Rake angle: 0° ISO code: 090304 Hole: cylindrical Shape: square Designs / Special features Material: carbide Grade: GH110 (Tungaloy) Chipbreaker: 01 Intended use: turning Model series: ISO indexable turning inserts Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What types of turning tasks is this insert suited to? The insert is designed for general external and internal turning operations; the GH110 grade and square form aim to provide a balance of wear resistance and edge stability for repetitive machining tasks. How is holder compatibility checked? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these dimensions to the chosen external holder or boring bar ensures correct seating and clamping. What does the GH110 designation mean? GH110 is a Tungaloy carbide grade selected to combine wear resistance and toughness, supporting sustained edge life and stable cutting behaviour in turning applications. Can the insert be used for both external and internal turning? Yes, the geometry and chipbreaker are suitable for both external and internal turning when paired with the appropriate holder and machining parameters. What mounting features should be noted? The insert features a cylindrical locating hole and requires a compatible clamp set and fastening screws; verify holder seat geometry and clamping method for secure fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet GT9530 for enhanced surface finish, ISO‑standard SNGG 090304 compatibility for secure mounting, and a compact square form with a 0.4 mm corner radius for precise finishing operations — order directly via Metav Werkzeuge or consult the team for tailored recommendations. SNGG 090304 GT9530 turning indexable insert – Tungaloy (square, 90°) A SNGG090304-01 GT9530 indexable insert engineered for precision external and internal turning, optimised for finishing to light turning of Stahl with reliable wear resistance. Coated cermet GT9530 for steel finishing ISO‑standard SNGG 090304 insert Square 09 form with 0.4 mm corner radius Cylindrical-hole design, 3.18 mm thickness Consistent finishing and extended tool life with coated cermet technology The grade is a coated cermet GT9530, designed to combine wear resistance with a fine edge for improved surface quality in finishing applications. In practical terms, this means fewer rework operations and a more consistent part surface when machining Stahl under stable set-ups. The 0.4 mm corner radius delivers a controlled cutting engagement that supports a high-quality finish without sacrificing edge strength, while the 3.18 mm plate thickness contributes to mechanical robustness during clamping. For productive finishing cycles the grade's balance of abrasion resistance and edge retention reduces downtime and tooling costs per component. ISO compatibility and secure clamping for repeatable processes As an ISO‑standard insert, the geometry and mounting features ensure reliable compatibility with appropriately specified external holders and boring bars. The square 09 format and the cylindrical hole permit straightforward fastening with the matching clamping set and replacement screws; the 90° lead angle provides a conventional profile for external turning and facing tasks. The 0° rake setting and chipbreaker 01 are tuned for finishing to light turning, offering stable chip control when the machine setup is rigid. Selecting holders with matching tolerance classes and proper tightening torque maintains repeatability and avoids unexpected runout or seat deformation. Practical guidance for process selection and productivity gains This insert is aimed at stable machining scenarios where surface quality and longevity matter; choose the SNGG090304-01 with GT9530 when finishing Stahl components that benefit from fewer tool changes. Matching feed, cutting speed and coolant strategy to the grade and chipbreaker typically reduces cycle time and improves first-pass yield. For shops transitioning from conventional grades, expect a noticeable improvement in surface integrity and a longer interval between indexings when the setup is vibration‑controlled. If additional cutting data or compatibility checks are required, technical assistance is available — the Metav Werkzeuge team can provide supplementary specifications and machining windows via e-mail or phone: info@metav-werkzeuge.com, +49 2822 7131930. For order enquiries or specification support on Tungaloy GT9530 inserts, contact Metav Werkzeuge for availability and application advice — Metav Werkzeuge can advise on holder compatibility and process optimisation to integrate the inserts into existing turning operations. Technical data Article number: 6997768 Manufacturer SKU: TUN6997768 Dealer SKU: 6997768-Tungaloy Model series: ISO turning indexable insert series Description: SNGG090304-01 GT9530 Tungaloy indexable insert Facts Thickness: 3.18 mm Corner radius: 0.4 mm ISO code: 090304 Insert size: 09 Lead angle: 90° Rake angle: 0° Chipbreaker: 01 Special features Substrate/coating: coated cermet GT9530 Material base: cemented carbide Plate form: square Hole: with cylindrical hole Intended use: external and internal turning, finishing to light turning of Stahl Compatibility determined by: form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The insert is optimised for finishing and light turning of Stahl; the coated cermet GT9530 provides abrasion resistance and an improved surface on typical steel grades. Which holder types fit the SNGG 090304 geometry? ISO‑compatible external holders and boring bars designed for square 09 inserts with a cylindrical hole and matching tolerance class will accept the SNGG090304-01; ensure the clamping set and screw match the seat design. How does the chipbreaker 01 influence performance? Chipbreaker 01 on the SNGG090304-01 promotes controlled chip formation during finishing cuts, aiding consistent surface quality and reliable evacuation in stable machining conditions. Can this insert be used for roughing operations? The GT9530 grade is intended as a wear‑resistant finishing to light universal grade; for heavy roughing a dedicated roughing grade with a different chipbreaker is recommended. What is the significance of the 0° rake and 0.4 mm corner radius? The 0° rake offers a neutral cutting geometry suited to finishing, while the 0.4 mm corner radius balances edge strength and surface finish, making it suitable for high‑quality external turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 GT9530 Wendeplatten - Tungaloy
Take advantage of wear-resistant cermet performance and ISO compatibility together with a stable 90° square geometry to improve finishing quality and extend tool life; order directly via Metav Werkzeuge or consult our specialists for holder matching. SNGG 090304 GT9530 indexable turning insert — Tungaloy A SNGG 090304 GT9530 indexable insert engineered for external and internal turning, offering a wear-resistant cermet grade for fine finishing and light general-purpose operations. SNGG shape ISO 090304 format Coated cermet grade GT9530 Optimised for fine finishing and light turning 0° clearance angle with cylindrical hole Consistent finishing with extended runtime The GT9530 is a coated cermet designed to combine good wear resistance with an emphasis on surface quality, making it well suited for finishing passes and light general-purpose turning of steel. The corner radius 0.4 mm helps produce a refined surface while maintaining predictable edge wear. Choosing this grade reduces changeovers and contributes to a more efficient machining cycle, which lowers unit costs in stable production setups without sacrificing precision. Stable geometry and secure clamping for reproducible cuts The square, 90° geometry and a 3.18 mm thickness provide rigidity for profile turning and consistent engagement with the workpiece. The insert is supplied with a cylindrical hole, enabling positive clamping and repeatable seating in compatible holders. Compatibility to a specific holder is determined by form, clearance, tolerance class, clamping method, size and thickness; matching these parameters ensures safe operation and predictable tool life across series-production jobs. Best fit for steel finishing and light universal use This grade was developed primarily for steel applications where a high-quality surface finish is required alongside respectable tool life. The combination of GT9530 properties and a refined chip control geometry suits stable setups and moderate cutting forces—select a chipbreaker and holder stability aligned to the task to achieve the advertised performance. For less stable conditions or heavy roughing, consider heavier-duty grades or geometry alternatives. System approach for inventory and process planning As an ISO-format turning insert, the component integrates into a system consisting of a matching external holder or boring bar, a locating pad/clamp set and replacement screws. Standardised dimensions simplify stocking and expedite tool change procedures on the shop floor, reducing downtime. When specifying tooling, include holder form, tolerance class and fastening type to guarantee a perfect match; technical advisers can support compatibility checks and inventory optimisation. For advice on Tungaloy’s GT9530 grade and to confirm holder compatibility, contact Metav Werkzeuge for tailored guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997767 SKU: 6997767-Tungaloy Manufacturer SKU: TUN6997767 Brand: Tungaloy Model series: ISO turning inserts Material: carbide ISO designation: 090304 Grade: GT9530 Facts Thickness: 3.18 mm Corner radius: 0.4 mm Included hole: yes Hole style: cylindrical Clearance angle: 0° Insert form: square (90°) Size: 09 Special features Coated cermet grade GT9530 Optimised for finishing and light universal turning ISO-compatible insert format Positive clamping via cylindrical hole Suitable for steel applications FAQ What materials is this insert best suited for? The SNGG090304-01 GT9530 turning insert is formulated for steel machining, particularly when a fine surface finish and extended tool life are priorities. How does the GT9530 grade affect tool life and finish? The GT9530 coated cermet offers improved wear resistance and surface quality in finishing operations, so the insert delivers longer runtimes and consistent finishes under stable cutting conditions. Which holders are compatible with this ISO insert? Compatibility depends on the holder form, clearance, tolerance class, fastening method, size and thickness; the SNGG 090304 geometry fits standard ISO holders designed for square 09 inserts. Does the insert include a hole for clamping? Yes, the insert is supplied with a cylindrical hole to enable positive clamping and reproducible seating in suitable holders. What is the corner radius and why does it matter? The insert has a corner radius of 0.4 mm, which balances a fine surface finish with acceptable edge strength for finishing and light general-purpose turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the NS9530 uncoated cermet finishing grade, the 90° SNGG geometry and secure screw clamping for consistent high-quality external and internal turning results; procure the insert through Metav Werkzeuge or consult their technical advisers for application-specific selection. SNGG 090304 NS9530 — ISO turning insert (90°, square) by Tungaloy The SNGG090304-01 NS9530 Tungaloy insert is an ISO-format square turning insert designed for finishing operations on steel, offering a sharp cutting edge, low cutting forces and superior surface quality ISO SNGG 090304 geometry for reliable clamping Uncoated cermet grade NS9530 for fine finishing 0° clearance and 90° approach for versatile turning Cylindrical hole for robust screw mounting High-quality finishing for steel components The uncoated cermet grade NS9530 is engineered as a finishing grade for steel, delivering a sharp cutting edge and low cutting forces that together produce an improved surface finish and reduced tendency for built-up edge. For continuous turning and small depths of cut the material composition of the grade helps to maintain stable cutting conditions and predictable wear behaviour. This makes the insert particularly suited to precision components where surface integrity and dimensional consistency are crucial. The result is fewer rework cycles and a more reliable production flow. Secure mounting and broad ISO compatibility The insert follows ISO indexing conventions and its compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness. The SNGG geometry with a 90° approach angle and a cylindrical hole ensures secure screw clamping in a matched external holder or boring bar. Key dimensions such as the 3.18 mm thickness and corner radius 0.4 mm support stable engagement in the pocket while allowing repeatable indexing. The supplied system normally comprises the ISO insert, a matched outer holder or boring bar, an underlayer/clamp set and replacement screws for straightforward assembly. Improved process reliability and productivity By combining a dedicated finishing grade with a square, indexable geometry, the insert reduces the need for multiple tool changes during finishing passes and contributes to shorter overall cycle times where fine tolerances are required. The continuous cut recommendation for this grade and the small depth-of-cut focus mean operators can expect consistent part-to-part results and fewer surface defects. Where surface quality is a primary KPI, using a specialised grade like NS9530 as part of a stable machine setup will deliver measurable quality gains while simplifying tool management. Selection guidance and practical recommendations Select the matching chipbreaker 01 and the finishing grade NS9530 for best results when turning steels in a continuous, low-feed regime. Verify holder compatibility by checking the pocket form, 0° clearance, tolerance class, fastening method and the insert thickness of 3.18 mm before use. The insert is uncoated, so it performs best in steady cutting conditions; for interrupted cuts or heavy roughing a different grade or geometry is recommended. Complement the insert with the correct shim/clamp set and torque the clamping screw to the holder manufacturer’s specification to secure repeatable performance. Contact Metav Werkzeuge today to discuss application-specific recommendations for the Tungaloy NS9530 SNGG090304-01 insert, check stock availability or arrange a specification review — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6997810 SKU: 6997810-Tungaloy Manufacturer SKU: TUN6997810 Model series: ISO turning indexable inserts Name: SNGG090304-01 NS9530 Tungaloy insert Core specifications Geometry code: 090304 Approach angle: 90° Corner radius: 0.4 mm Thickness: 3.18 mm Size: 09 Clearance angle: 0° Material & special features Cutting material: uncoated cermet (NS9530) Substrate material: cemented carbide Plate form: square Hole: with hole Hole style: cylindrical hole Chipbreaker: 01 FAQ What is this insert best used for? The SNGG090304-01 NS9530 insert is optimised for finishing steel in continuous turning operations, delivering low cutting forces and a high surface finish. Which holders are compatible with this ISO insert? Compatibility requires a holder that matches the SNGG geometry, 0° clearance, tolerance class, fastening type, size 09 and 3.18 mm thickness; use a matched external holder or boring bar with the appropriate shim/clamp set. How is the insert secured in the pocket? The insert uses a cylindrical hole for screw clamping; the combination of the hole and correct clamp/shim ensures stable, repeatable mounting when fastened to the specified torque. Is the grade coated and what does that imply? This is an uncoated cermet grade (NS9530), which provides a very sharp edge and is tailored to finishing; coated grades are typically preferred for roughing or when higher temperature resistance is required. What are the key dimensions to check before ordering? Check the geometry code 090304, approach angle 90°, thickness 3.18 mm, corner radius 0.4 mm, size 09, and the fact that it is an ISO-format square insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing performance combined with ISO compatibility and the proven NS9530 uncoated cermet grade for stable surface quality and low cutting forces. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNGG 090304 NS9530 Tungaloy turning insert — square 90°, finishing grade A SNGG090304-01 NS9530 ISO-standard square turning insert optimised for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. ISO‑standard square insert Uncoated cermet grade NS9530 Sharp edge for fine finishing Suitable for continuous cuts and small depths Improved surface finish with a sharp cermet grade The NS9530 uncoated cermet is specified for finishing applications where a sharp cutting edge and minimal cutting forces deliver superior surface finish on steels. With its square 90° geometry and a 0.4 mm corner radius, the insert produces consistent profile control and reduced vibration during light finishing passes. The combination of grade and geometry supports predictable chip formation during steady, continuous cutting, which translates into fewer rework cycles and higher first-pass accuracy. Reliable fit and straightforward system integration As an ISO-standard insert, the plate fits a broad range of matched holders when form, clearance, tolerance class, clamping and thickness align. The SNGG format, 3.18 mm thickness and square geometry ensure mechanical stability in the pocket, while the cylindrical hole provides secure clamping where required. This defined interface simplifies tool selection and reduces setup time, enabling shops to standardise toolholders and inserts across turning operations for improved process control. Productivity advantages in finishing steel components Designed as a finishing grade for steel, the insert supports small depths of cut and continuous feeds, offering low cutting forces that help preserve part geometry and chucking arrangements. The sharp edge reduces built-up edge tendencies on common steels, while the robust substrate of the grade maintains edge integrity during sustained runs. For applications requiring repeatable high-quality surfaces and tight tolerances, this insert contributes directly to shorter cycle times and more consistent component quality. For precise finishing on steel, specify the NS9530 grade — contact Metav Werkzeuge for tailored application advice and stock availability via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6997809 SKU: 6997809-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 090304 WPL designation: SNGG090304-01 Facts Plate size: 09 Plate thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 0° Included hole: with hole (cylindrical) Special features Uncoated cermet grade NS9530 Finishing grade for steel with sharp cutting edge Square plate, 90° geometry Suitable for continuous cuts and small depths of cut Compatibility with ISO holders; requires matching clamping and tolerance class System components: ISO insert, matching external holder or boring bar, support pad/clamping set and replacement screws FAQ What materials is this insert intended for? This insert is specified as a finishing grade for steel; the NS9530 uncoated cermet is optimised for steel finishing operations. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius balances edge strength and surface quality, improving profile accuracy while maintaining a fine surface finish in finishing passes. Is the insert compatible with ISO toolholders? Yes, the SNGG format is ISO-standard; compatibility depends on matching form, clearance, tolerance class, clamping, size and thickness of the holder. What is the significance of the cylindrical hole? The cylindrical hole provides positive location and secure clamping in holder designs that accommodate pinned or screw-clamped indexable plates. Which SKU and article number should be referenced when ordering? Use SKU 6997809-Tungaloy or article number 6997809 to ensure the correct SNGG090304-01 NS9530 finishing insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing, low cutting forces and ISO compatibility to improve turning throughput and surface quality. The uncoated NS9530 cermet grade delivers a sharp cutting edge for continuous cuts and fine finishes; order directly via Metav Werkzeuge or consult the team for application-specific advice. SNGG 090304 NS9530 — Tungaloy SNGG090304-01 indexable insert for turning (uncoated cermet, 90° square) The SNGG090304-01 is a square ISO indexable insert intended for finishing turning of steel, offering a 90° approach and a cylindrical locating hole for secure clamping Square ISO geometry for stable turning NS9530 uncoated cermet for fine surface finish 0° clearance angle for minimum cutting forces Cylindrical hole for consistent clamping Achieve superior surface finish with a finishing-grade insert The square indexable insert is engineered as a finishing grade for steel, meaning the focus is on producing low-roughness surfaces rather than aggressive material removal. The NS9530 uncoated cermet delivers a sharp cutting edge and reduced built-up edge formation, which together lower cutting forces and help achieve consistent parts right off the machine. For operations with small depths of cut and continuous chip flow, this insert minimises rework and reduces the need for secondary finishing, supporting more efficient cycle times. Reliable compatibility and secure clamping reduce setup risk Compatibility with the toolholder is determined by geometry, clearance angle, tolerance class, fixation and plate thickness. The square form with a cylindrical locating hole ensures reliable seating and repeatable positioning in the clamping seat, so the insert is correctly registered each time. The 90° approach is advantageous for general turning profiles and face-off operations, while the plate thickness and hole style contribute to mechanical stability under finish-cutting conditions, lowering the likelihood of vibration-related marks. Understanding the grade and what it means for production The cutting material is an uncoated cermet developed for finishing: it combines ceramic hardness with metallic toughness to retain a sharp edge under moderate temperatures. Practically, this means longer periods between index changes and improved surface integrity on steel components. When selecting cutting data, favour modest feeds and cutting speeds tuned for cermet behaviour; this preserves the edge geometry and delivers the expected surface quality without excessive tool wear. Practical benefits tailored to turning workflows Using a dedicated finishing insert of this type supports predictable outcomes in batch production and single-part machining alike. The low cutting forces reduce spindle load and enable stable machining on less rigid set-ups, while the ISO-standard dimensions allow quick changeover between holders and spare inserts. Together, these characteristics support process stability, fewer scrap parts and a more consistent finish—advantages that translate directly to time saved and improved first-pass yield. Contact Metav Werkzeuge for tailored cutting data and to secure Tungaloy finishing inserts for immediate use in turning operations Technical Data Article number: 6997804 SKU: 6997804-Tungaloy Manufacturer article number: TUN6997804 Model series: ISO-Drehwendeschneidplatten Facts Grade: NS9530 Cutting material type: uncoated cermet Radius: 0.4 mm Thickness: 3.18 mm Size: 09 Angle: 90° Clearance angle: 0° Hole: with cylindrical hole Special features Square plate geometry Designed for finishing turning of steel Low cutting forces for continuous cuts Compatible with ISO toolholders (form and tolerance dependent) Cylindrical locating hole for secure clamping FAQ What applications suit this finishing insert best? This finishing insert, the SNGG090304-01 NS9530 from Tungaloy, is optimised for finishing turning operations on steel where low cutting forces and a superior surface finish are required. Can this insert be used in any ISO-compatible holder? The insert fits ISO-standard holders where form, free angle, tolerance class, fixation, size and thickness match; correct holder selection ensures reliable seating and clamping. How does the NS9530 grade affect cutting data? The NS9530 uncoated cermet grade benefits from moderate cutting speeds and fine feeds to preserve the sharp edge and achieve consistent surface quality during continuous cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 TH10 Wendeplatten - Tungaloy
Combining a sharp TH10 grade with uncoated carbide construction and ISO compatibility, this insert delivers low cutting forces and consistently clean finishes in non‑ferrous turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNGG 090304 TH10 – ISO turning insert (Tungaloy) The SNGG090304-01 TH10 is an ISO-indexed turning insert designed for external and internal turning of non‑ferrous materials, offering a sharp, low‑force cutting geometry in a square form. ISO‑normed SNGG form 090304 Sharp uncoated TH10 grade Square insert, 90° cutting angle 0.4 mm corner radius for fine finish Efficient turning with low cutting forces and reliable finishes The design focuses on achieving low cutting forces and superior surface quality when machining non‑ferrous materials. The uncoated carbide composition in the TH10 grade provides a sharp cutting edge that reduces chatter and minimises built‑up edge formation, which in turn supports longer uninterrupted runs and fewer reworks. For production environments where cleanliness of the workpiece surface and repeatability are priorities, this insert helps to maintain cycle time and part quality through stable chip formation and predictable cutting behaviour. Compatibility and handling that speeds up setup As an ISO‑standardised indexable plate, the insert matches common ISO turning holders by form, clearance angle, tolerance class, fastening method, size and thickness, simplifying tool assembly. The square form with a 90° cutting angle and a 0.4 mm corner radius offers versatility for both finishing and light profiling tasks. The central cylindrical hole ensures secure clamping and easy indexing. Clear specification of the 3.18 mm plate thickness and ISO designation allows straightforward selection of the correct holder and reduces trial‑and‑error at the machine, thus improving first‑time setup rates. Process benefits and recommended uses for production Intended primarily for turning operations on non‑ferrous metals and similar materials, the insert suits both external and internal cuts where a sharp edge enhances finish and reduces cutting forces. The TH10 uncoated grade is particularly effective where low cutting resistance and a clean part surface are required rather than extreme wear resistance. Selecting the appropriate chipbreaker and matching the grade to workpiece stability will deliver the most efficient results; when combined with suitable feeds and speeds, the insert contributes to higher productivity and consistent component tolerances. For application advice or to order the SNGG090304‑01 TH10 insert from Metav Werkzeuge (SKU TUN6806487), contact Metav Werkzeuge for tailored recommendations and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806487 Manufacturer SKU: TUN6806487 SKU: 6806487-Tungaloy ISO designation: SNGG090304-01 Typ: SNGG Facts Corner radius: 0.4 mm Cutting angle: 90° Relief angle: 0° Plate thickness: 3.18 mm Size: 09 Special features Grade: TH10 Material: uncoated carbide Plate form: square Hole: with hole, cylindrical hole Chipbreaker: 01 Application: turning (external and internal) Sharp universal grade for non‑ferrous materials FAQ Which materials is this insert best suited for? The SNGG090304‑01 TH10 insert from Tungaloy is optimised for non‑ferrous materials and applications where a sharp, uncoated carbide edge produces low cutting forces and clean surfaces. Can this insert be used for internal turning? Yes. The square form and ISO indexing make the insert suitable for both external and internal turning operations when paired with a compatible holder. What are the key dimensional specifications to check when selecting a holder? Confirm the ISO designation (SNGG090304‑01), plate size (09), plate thickness (3.18 mm), relief angle (0°) and the presence of a cylindrical hole to ensure secure clamping and correct fit. How does the TH10 grade affect performance? TH10 is an uncoated, sharp universal grade that reduces cutting resistance and supports good surface finish on non‑ferrous materials rather than prioritising maximum wear resistance. Is the chipformer relevant for finishing tasks? Yes. The chipbreaker 01 is intended to assist in controlled chip formation for the specified materials and cutting conditions, improving surface quality and process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 TH10 Wendeplatten - Tungaloy
Benefit from the combination of an uncoated cemented carbide cutting edge and ISO-standard geometry for reliable turning performance; the low cutting forces of the TH10 grade support clean surface finishes and efficient cycle times. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. SNGG 090304 TH10 SNGG — Turning indexable insert by Tungaloy, uncoated carbide, 90° A SNGG090304-01 TH10 indexable turning insert engineered for external and internal turning, offering a sharp uncoated carbide grade for low cutting forces and controlled chip formation in non-ferrous materials ISO 090304 format for broad compatibility Uncoated cemented carbide TH10 for low cutting forces Square 90° geometry for stable turning 0.4 mm corner radius for improved surface finish High-efficiency cutting with a sharp uncoated grade The uncoated TH10 cemented carbide composition delivers a sharp cutting edge that reduces machining forces, making the insert particularly effective for non-ferrous materials and operations where low cutting resistance is desired. Lower forces translate into reduced vibration and improved tool life of the holder assembly; in practice this means steadier feeds and consistent surface quality when performing external or internal turning. The result is a predictable, efficient machining cycle that supports higher throughput while maintaining finish requirements. Proven geometry for clamp stability and holder compatibility Built to the ISO 090304 format, the square 90° geometry and cylindrical hole ensure positive clamping and repeatable seating in compatible holders. Compatibility depends on form, clearance angle, tolerance class, fixing method, nominal size and thickness; the specified 0° clearance angle and plate thickness of 3.18 mm contribute to a stable contact area and load distribution under cutting. This construct simplifies integration into existing tool systems and reduces the effort needed to verify fitment prior to production runs. Controlled chip formation and finishing capability The chipbreaker 01 profile, combined with a 0.4 mm corner radius, helps to shape chips and supports a fine surface finish on machined components. Where a clean finish and low burr formation are priorities, the sharp uncoated edge assists in achieving the required dimensional and cosmetic standards without reliance on coatings. For processes that demand consistent edge behaviour, this insert offers a balance between controllable chips and form stability during both roughing and light finishing passes. Practical selection advice for process reliability For reliable results, select a matching holder and clamping set that conform to the ISO format and accommodate the insert’s size and thickness. When machining non-ferrous alloys or mixed batches, the uncoated TH10 grade provides a versatile option that reduces friction and helps avoid built-up edge. If guidance is required on holder pairing, insert orientation or cutting parameters for specific materials, Metav Werkzeuge’s consultants can provide process-oriented recommendations to align the insert’s capabilities with production goals. Contact Metav Werkzeuge today for specific application advice and to secure the SNGG090304-01 TH10 insert for immediate dispatch Technical data Article number: 6806492 Manufacturer SKU: TUN6806492 SKU: 6806492-Tungaloy Model series: ISO-Drehwendeschneidplatten WPL designation: SNGG090304-01 TH10 Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Insert angle: 90° Plate size: 09 Clearance angle: 0° Features Material: uncoated cemented carbide (TH10) Plate form: square Hole: with cylindrical hole Chipbreaker: 01 Application: Turning (external and internal) System components: insert, compatible external holder or boring bar, clamping set and screws ISO format: 090304 FAQ Which materials suit this insert best? The SNGG090304-01 TH10 insert is optimised for non-ferrous materials and applications where an uncoated cutting edge supports low cutting forces and clean surfaces; the TH10 grade is designed to perform reliably in such conditions. Is the insert compatible with standard ISO holders? Compatibility is provided by the ISO 090304 format; the insert’s shape, clearance angle, thickness and hole require a matching holder designed for square 90° inserts and the stated tolerance class. What machining tasks is the insert intended for? This indexable plate is intended for both external and internal turning operations, offering a balance between chip control and surface finish for roughing and finishing passes. How does the chipbreaker affect production? Chipbreaker 01 supports controlled chip formation in many turning scenarios, aiding in evacuation and reducing the risk of chip-related interruptions during continuous turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 X407 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a durable Tungaloy X407 grade and precise geometry for consistent turning results. The insert’s square form, 0.4 mm corner radius and 3.18 mm thickness ensure reliable chip control and repeatable edge life in external and internal turning operations. Order the SNGG090304-01 X407 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. SNGG090304-01 SNGG 090304 X407 Turning insert by Tungaloy A SNGG090304-01 X407 Tungaloy turning insert designed for ISO-standard external and internal turning, offering durable cutting performance for general turning applications. ISO-standard square insert SNGG 090304 Tungaloy X407 grade for wear resistance 0.4 mm corner radius for precise profiling Cylindrical hole, 3.18 mm thickness Seamless ISO compatibility for quick tool set-up and interchangeability The ISO-based design guarantees compatibility with standard holders and boring bars, reducing setup complexity on production lines. Form, 0° clearance, tolerance class, fixing method, size and thickness determine correct seating; the square geometry and cylindrical hole simplify alignment and clamping. For workshops aiming to minimise downtime, this standardised approach supports fast re‑indexing and predictable tool behaviour, avoiding time-consuming adjustments and ensuring continuity in machining cycles. Durable Tungaloy X407 carbide for extended cutting performance The insert uses the Tungaloy grade X407 in a carbide substrate, balancing wear resistance and edge toughness to maintain cutting stability under varied conditions. This composition is suited to conventional turning tasks where a compromise between life and edge strength is required. By pairing the grade with an appropriate chipbreaker 01, the system supports consistent chip formation and longer intervals between tool changes, yielding improved process economy and fewer interruptions in series production. Precision geometry to control chips and surface finish A 0.4 mm corner radius and square form provide controlled engagement with the workpiece, helping to achieve repeatable surface integrity while resisting edge chipping during interrupted cuts. The insert’s 3.18 mm thickness and 90° orientation confer additional rigidity for lighter and moderate roughing to finishing passes. Combined with the correct holder and clamping set, the geometry supports stable metal removal and predictable dimensional results in both external and internal turning. Practical system considerations for reliable implementation Installation is part of a system: an ISO insert, matching outside holder or boring bar, suitable shim/clamp set and replacement screws. The presence of a cylindrical hole facilitates secure fastening and straightforward indexing. When choosing the insert, select the chipbreaker and grade relative to the workpiece material and machining stability; this ensures the X407 grade performs optimally and contributes to a more productive turning process. Contact Metav Werkzeuge to discuss Tungaloy insert selection, check compatibility with existing holders and secure the SNGG090304-01 X407 for your turning applications — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6806485 Manufacturer SKU: TUN6806485 Our SKU: 6806485-Tungaloy Model series: ISO indexable turning inserts Designation: SNGG090304-01 X407 Facts Size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 0° Insert angle: 90° Hole style: cylindrical hole Special features Material: carbide Grade: X407 Chipbreaker: 01 Shape: square With hole: cylindrical hole Application: turning FAQ What materials is the insert suitable for? The SNGG090304-01 X407 insert is intended for general turning; pair the X407 grade and chipbreaker with the target material to achieve optimal wear behaviour and chip control. How is the insert secured in the holder? The insert features a cylindrical hole and is clamped with the matching shim and screw set; compatibility depends on form, size, thickness and tolerance class. What is the corner radius and how does it affect cutting? The corner radius is 0.4 mm, offering a balance between edge strength and the ability to produce a fine profile and consistent surface finish on turning passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090304 X407 Wendeplatten - Tungaloy
Take advantage of a compact, ISO‑compatible solution that combines repeatable cutting performance and robust cemented carbide construction for reliable turning operations; order the insert directly via Metav Werkzeuge or consult our technical advisers for application guidance. SNGG 090304 X407 indexable turning insert by Tungaloy — 90° geometry, X407 grade SNGG090304-01 X407 is an ISO‑standard indexable turning insert designed for general external and internal turning where geometry, clearance and chip control determine process stability. ISO‑standard turning insert Cemented carbide X407 grade 90° included angle for versatile turning 0° clearance for neutral cutting geometry Consistent metal removal with measurable benefits The indexable insert delivers a predictable cutting result thanks to the cemented carbide substrate and the tailored X407 grade, which balances wear resistance and edge toughness. The square shape with a 90° included angle provides a neutral cutting attitude suitable for facing and profile turning; this reduces required tool‑holder adjustments and simplifies process set‑up. The combination of chipbreaker 01 geometry and the specified corner form helps control chips and maintain surface finish, translating into fewer interrupted cycles and more consistent part quality. Designed for compatibility and secure clamping Compatibility is determined by form, relief, tolerance class, fastening, size and thickness; the insert’s ISO‑standard specification ensures predictable fitting in most holders that accept the corresponding geometry. A cylindrical hole with fastening provision allows secure clamping and fast index changes without bespoke adapters. The neutral 0° clearance and the 0.4 mm radius at the cutting edge provide a balance between edge strength and dimensional accuracy, making the component a practical choice where fixture repeatability and efficient tool changes support higher machine uptime. Material performance and suitable applications Selected for turning, the SNGG090304-01 complements holder geometry with a grade chosen for productive cutting: X407 from Tungaloy is engineered to support a wide range of steels and alloyed materials while offering stable wear behaviour in continuous and interrupted cuts. The cemented carbide body maintains cutting edge integrity under thermal and mechanical load, enabling dependable tool life and predictable regrind schedules. For applications requiring adjustable cutting data, the insert’s features facilitate a clear cost‑benefit assessment between cycle time and insert longevity. For application advice or to request complementary technical data, contact Metav Werkzeuge — Metav Werkzeuge can advise on holder compatibility and cutting-data recommendations at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6806490 Manufacturer SKU: TUN6806490 SKU: 6806490-Tungaloy Name: SNGG090304-01 X407 Tungaloy indexable insert Core data Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° Insert thickness: 3.18 mm Size designation: 09 Special features Grade: X407 (Tungaloy) Material: cemented carbide Hole: with cylindrical hole Shape: square Series: ISO turning indexable inserts Application: turning FAQ What work is this insert designed for? The SNGG090304-01 X407 Tungaloy indexable insert is designed primarily for external and internal turning applications where a 90° geometry and balanced edge properties are required. Which materials suit the X407 grade best? The X407 grade provides a broad material coverage with a focus on steels and alloyed steels; the cemented carbide construction helps maintain edge stability under common turning conditions. How does the 0.4 mm radius affect part finish? A 0.4 mm corner radius increases edge strength and tends to improve surface finish on medium‑to‑heavy cuts, reducing the risk of chipping compared with very small radii. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and fastening conventions; compatibility depends on holder form, tolerance class and clamping arrangement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGG 090308 GH110 Wendeplatten - Tungaloy
Benefit from the combination of durable GH110 Tungaloy carbide, a precise 0.8 mm corner radius, and ISO compatibility for reliable, repeatable turning results; order the SNGG090308-01 directly via Metav Werkzeuge or ask our consultants if needed. SNGG 090308 GH110 — Indexable turning insert by Tungaloy, 0.8 mm radius, 90° The SNGG090308-01 GH110 Tungaloy insert is an ISO-standard indexable turning insert engineered for external and internal turning, offering a balanced combination of wear resistance and edge stability for general turning operations. ISO-standard SNGG form for broad holder compatibility GH110 grade for wear resistance and toughness 0.8 mm corner radius for versatile edge strength 90° cutting geometry with cylindrical hole for secure clamping Reliable performance through optimised grade and geometry The combination of the GH110 Tungaloy cutting grade and the carbide substrate delivers a pragmatic balance between wear resistance and toughness, which translates into consistent tool life under varied turning conditions. The insert’s 0.8 mm corner radius increases edge strength without compromising finish, while the 90° geometry supports square-shoulder and general-purpose cuts. In practical terms, this means fewer interruptions for insert changes and steady cycle times on medium-duty turning tasks. The geometry and grade are particularly effective where repeatable edge stability and predictable wear rates are required. Designed for fast integration and dependable clamping Compliance with ISO dimensions and the SNGG form ensures compatibility across a wide range of external holders and boring bars; fit is determined by form, clearance, tolerance class, fastening style, size and thickness. The insert’s cylindrical hole and standard fixing allow secure mounting and straightforward indexation, reducing set-up time and minimising downtime for insert changes. Explaining the system: an indexable insert system comprises the insert, a matching holder, a shim or clamp pack and fastening screws — each element influences repeatability and stability on the shop floor. This standardised approach supports predictable tool behaviour and easier inventory management. Practical application guidance and selection notes Intended for turning operations, the insert is delivered in the SNGG090308-01 geometry with chipbreaker 01; the chipbreaker and GH110 grade should be matched to the workpiece material and machining stability for best results. Where higher cutting forces or interrupted cuts occur, the combination of edge geometry and the carbide base provides improved resistance to chipping. For fine surface finish or finish passes, consider reduced depths of cut and stable clamping to exploit the insert’s edge stability. Selecting the correct holder and tightening sequence is essential to transfer cutting forces safely and maintain repeatable results. For application advice on Tungaloy GH110 inserts and to confirm holder compatibility, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss the best setup for production requirements. Technical data SKU: 6806503-Tungaloy Manufacturer SKU: TUN6806503 Article number: 6806503 Model series: ISO indexable turning inserts Facts Corner radius: 0.8 mm Thickness: 3.18 mm Insert size: 09 Clearance angle: 0° Cutting angle: 90° Hole: cylindrical hole Special features Material: carbide Grade: GH110 (Tungaloy) Shape: square Chipbreaker: 01 Application: turning (external and internal) Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What operations is this insert suitable for? The SNGG090308-01 GH110 Tungaloy indexable insert is suitable for both external and internal turning operations, covering general-purpose and medium-duty cutting tasks. How does the GH110 grade affect tool life? GH110 provides a balance of wear resistance and toughness, so the SNGG090308-01 tends to show predictable wear behaviour and improved edge stability across a range of turning conditions. Is the insert compatible with standard SNGG holders? Yes, the insert follows ISO SNGG dimensions; compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness to the holder. What is the corner radius and why is it important? The corner radius is 0.8 mm; this radius increases edge strength and improves resistance to chipping while maintaining a versatile surface finish capability. Does the insert include a hole for clamping? The SNGG090308-01 is supplied with a cylindrical hole, designed for secure clamping in compatible holder systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090308 GH330 Wendeplatten - Tungaloy
High wear resistance and stable cutting-edge performance reduce downtime; compact 90° square geometry and a 0.8 mm corner radius ensure reliable external and internal turning. Order the SNGG090308-01 GH330 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. SNGG 090308 GH330 — Turning insert, 90° square, Tungaloy The SNGG090308-01 GH330 is an ISO-format carbide indexable insert designed for external and internal turning, featuring a 90° square geometry and a 0° relief to suit a wide range of turning operations. ISO 90° square geometry GH330 grade for wear resistance 0.8 mm corner radius for robust edges 3.18 mm plate thickness for stability Consistent tool life through balanced grade technology The GH330 cutting grade from Tungaloy combines wear resistance and edge toughness to extend service intervals while maintaining process stability. The substrate is carbide, chosen for its hardness and resistance to abrasion; the grade composition optimises the trade-off between flank wear and chipping resistance. For production environments where predictable life and repeatable part quality matter, this formulation reduces unexpected interruptions and supports steady throughput. Selection of the appropriate chipbreaker complements the grade to manage swarf and surface finish. Geometry designed for flexible external and internal turning A 90° square plate form delivers versatile cutting angles for facing and cylindrical work. The 0.8 mm corner radius provides a durable cutting edge that withstands intermittent cuts and supports light to moderate depth-of-cut strategies. The insert's 3.18 mm plate thickness contributes to rigidity and vibration damping when mounted in a correctly matched holder. Because the insert conforms to the ISO turning plate family, compatibility is determined by form, relief angle, tolerance class, mounting style, size and thickness — allowing straightforward integration into existing tool systems while ensuring predictable cutting behaviour. Integrating the insert into a productive tooling system System assembly typically comprises the ISO indexable insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws. The insert's cylindrical hole simplifies positive clamping and easy orientation during tool change. Choosing the correct holder geometry and clamping parts minimises runout and ensures repeatable positioning, which in turn enhances part accuracy and surface quality. For process planning, pairing the GH330 grade with the appropriate chipbreaker 01 and cutting parameters yields an economical balance of tool life and productivity. For availability, matching holder recommendations and cutting data for the Tungaloy GH330-grade insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on the optimal configuration for your turning tasks Technical data Article number: 6806504 Manufacturer SKU: TUN6806504 SKU: 6806504-Tungaloy Brand: Tungaloy Name: SNGG090308-01 GH330 Tungaloy turning insert Numbers / Core technical data Corner radius: 0.8 mm Relief angle: 0° Plate thickness: 3.18 mm Geometry angle: 90° Size: 09 Special features Material: carbide Grade: GH330 (Tungaloy) Shape: square Hole: cylindrical, with hole Chipbreaker: 01 Application: turning (external and internal) ISO-series: ISO turning indexable plates Compatibility: determined by form, relief angle, tolerance class, mounting, size and thickness FAQ What materials is this insert intended for? The SNGG090308-01 GH330 insert is specified for turning applications; the GH330 grade is formulated to balance wear resistance and toughness for a broad range of workpiece materials, while chipbreaker selection and cutting data should be matched to the specific substrate. How does the 0.8 mm corner radius affect cutting performance? A 0.8 mm corner radius increases edge robustness and reduces the risk of chipping in interrupted cuts; using this radius supports stable insert life without excessively increasing cutting forces in typical turning operations. Which holders are compatible with this ISO-format insert? Compatibility depends on holder form, relief angle, tolerance class, mounting method, size and thickness; choose an external holder or boring bar designed for ISO turning indexable plates of size 09 and 3.18 mm thickness to ensure correct fit and repeatable clamping. What does the GH330 designation mean for process planning? GH330 is a Tungaloy grade that emphasises a balance between abrasion resistance and cutting-edge stability; for process planning, combine the GH330 grade with an appropriate chipbreaker and cutting parameters to achieve an economical tool life and consistent surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090308 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of NS520 cermet for fine surface finish, a 0.8 mm corner radius for secure edge strength, and ISO compatibility for straightforward toolholder integration. Order the SNGG090308-01 NS520 turning insert directly via Metav Werkzeuge or ask our consultants if needed. SNGG 090308 NS520 ISO turning insert for turning (square, 0.8 mm radius) – Tungaloy A SNGG090308-01 NS520 ISO-indexed turning insert designed for finishing and light turning of steel, featuring a 0° clearance angle and a cylindrical hole for reliable clamping. NS520 cermet for excellent finish Square insert with 90° approach angle 0° clearance angle for stable cuts Cylindrical hole for secure clamping Consistent surface quality for finishing operations The NS520 grade is a cermet developed for finishing to light machining of steel, prioritising surface integrity and dimensional stability. With a controlled edge geometry and a 0.8 mm corner radius, the insert sustains even wear and reduces the tendency to produce chatter marks during finishes. The combination of the cermet grade and the insert geometry supports predictable workpiece results, making it suitable for high-value components where surface quality and tolerance adherence are decisive. Predictable clamping and ISO compatibility Compatibility with ISO-indexed toolholders is determined by form, clearance angle, tolerance class, mounting and plate dimensions; this insert follows ISO standards for easy integration. The cylindrical hole and the square plate form provide consistent seating in standard pockets, reducing set-up variation and enabling reproducible clamping forces. For production environments that require repeatability between tool changes, the standardised form factor simplifies inventory management and reduces machine downtime. Chip control and machining stability explained The insert is supplied with chipbreaker 01, which is matched to finishing and light turning conditions to guide chip flow and avoid entanglement at low cutting depths. A modest 0° clearance angle contributes to predictable contact mechanics between insert and workpiece, offering stable cutting forces that benefit small-depth finishing passes. These features combine to lower the risk of built-up edge and to maintain a steady cutting process during extended runs. Grade composition, geometry and recommended use The SNGG series insert uses the NS520 sort, a cermet or coated cermet grade intended for fine finishing of steel, delivering uniform wear and good dimensional control. The square plate (size 09) with a 3.18 mm thickness supports light to medium clamping loads while the 90° approach geometry enables versatile turning set-ups. For best results select a matching holder and cutting parameters tuned to finish passes; the insert is particularly effective where surface quality and repeatable tolerances are the priority. Contact Metav Werkzeuge for tailored application advice and to request a quotation for the Tungaloy SNGG090308-01 NS520 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806493 SKU: 6806493-Tungaloy Manufacturer SKU: TUN6806493 Model series: ISO-indexed turning inserts Label: SNGG090308-01 NS520 Tungaloy turning insert Facts Approach angle: 90° Corner radius: 0.8 mm Clearance angle: 0° Plate thickness: 3.18 mm Plate size: 09 Special features Shape: square Hole: cylindrical hole Chipbreaker: 01 Grade: NS520 (cermet / coated cermet) Substrate material: carbide Application: Turning (finishing to light machining of steel) ISO designation: SNGG090308-01 Compatibility: ISO-indexed toolholders; match form, clearance, tolerance, mounting, size and thickness FAQ What materials is this insert best suited for? The SNGG090308-01 NS520 insert is optimised for finishing and light machining of steel, delivering high surface quality and uniform wear when used under appropriate cutting conditions. Which toolholders are compatible with this insert? Compatibility depends on the ISO pocket geometry; the SNGG090308-01 fits ISO-indexed turning holders that accept a square insert of size 09 with a cylindrical hole and the specified thickness. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius balances edge strength and finish: it increases resistance to edge chipping compared with finer radii while still permitting fine surface results during finish passes. What is the purpose of the cylindrical hole? The cylindrical hole provides consistent positioning and stable clamping in compatible toolholders, minimising rotational movement and ensuring repeatable seating during tool changes. Is this insert coated or uncoated? The product is supplied in the NS520 sort, which is specified as a cermet or coated cermet grade, tailored for fine finishing of steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090308 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected for the item SNGG090308-01 (Tungaloy, SKU 6997805-Tungaloy): the specification lists the cutting material as both Hartmetall (carbide) and as an uncoated cermet. These are distinct material classes and cannot both be assumed correct. Please verify and clarify the intended cutting material (carbide or cermet) so a complete, accurate product description can be produced, ensuring that customers and users of the product receive clear and unambiguous information regarding its composition, properties, and intended applications, which is critical for making informed decisions and avoiding potential issues during use.
SNGG 090308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a cermet finishing grade, precise ISO form and secure clamping for consistently high surface quality and stable production. Order the insert directly via Metav Werkzeuge or ask our consultants if technical compatibility needs confirmation. SNGG 090308 NS9530 turning insert — Tungaloy The SNGG 090308 NS9530 is a square ISO turning insert intended for finishing applications on Stahl, providing a sharp cutting edge and low cutting forces for continuous cuts. Finishing cermet grade NS9530 for Stahl Sharp cutting edge for superior surface finish ISO SNGG form, 3.18 mm plate thickness Cylindrical hole design for stable clamping High-quality finishing with reduced cutting forces The SNGG 090308 NS9530 insert is specified as an uncoated cermet finishing grade that excels in producing fine surfaces on Stahl. The combination of a sharp cutting edge and the inherent properties of the cermet substrate reduces cutting forces, which benefits both machine load and part accuracy. For shops aiming to improve first-pass surface quality, this plate enables continuous, small-depth passes that translate into fewer downstream operations and less rework. The NS9530 designation indicates the grade is optimised for low-power finishing rather than heavy material removal. Reliable fit and clamping in ISO tool systems Designed to the ISO dimensions for the SNGG form, the insert ensures consistent seating and repeatable positioning in compatible holders. The square plate geometry with a cylindrical hole and the specified 3.18 mm thickness contribute to robust clamping and reduced vibration during machining. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening and plate size, so matching the insert form to the correct external holder and clamp set is essential for achieving the advertised stability and surface results. Practical efficiency: longer productive cycles Made from Hartmetall cermet, this insert delivers stable chip formation under finishing conditions and demonstrates good wear behaviour when used within its recommended parameters. The low friction of the grade reduces built-up edge, resulting in reliable surface finish across runs and fewer interrupted cycles. Choosing the correct chipbreaker and insert sort for the workpiece material and cut type will extend tool life and reduce changeover frequency, providing measurable gains in process efficiency on series production. Intended applications and handling recommendations The insert is suitable for both external and internal turning where fine surface quality is required. The geometry and a 0° clearance make it particularly effective for continuous, small-depth cutting operations. Select a matching chipbreaker and arrange tool setup to minimise deflection when machining slender components. Because insert compatibility depends on form and tolerance class, confirm the holder interface before installation to ensure correct seating and torque for the clamping screw. Contact Metav Werkzeuge for advice on integrating this Tungaloy cermet finishing insert into existing turning setups and for support on holder compatibility Technical Data Article number: 6997812 SKU: 6997812-Tungaloy Manufacturer SKU: TUN6997812 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: SNGG090308-01 Size: 09 Corner radius: 0.8 mm Plate thickness: 3.18 mm Clearance angle: 0° Included angle: 90° Special features Uncoated cermet grade NS9530 Finishing grade for Stahl Square plate with cylindrical hole For continuous cuts and small depths of cut Compatibility requires matching form and tolerance class FAQ What materials is this insert best suited to machine? The SNGG 090308 NS9530 insert is a finishing cermet grade optimised for machining Stahl, delivering a sharp edge and low cutting forces suitable for fine finishes. Does the insert fit standard ISO SNGG holders? Yes, the insert follows ISO dimensions for the SNGG form, but correct fit depends on holder form, freeness angle, tolerance class and fastening arrangement; verify these parameters before use. Is the grade coated or uncoated? The NS9530 grade is uncoated cermet, selected for its ability to produce high-quality surfaces in finishing operations without added coatings. Which chipbreaker should be selected for best results? Choose a chipbreaker that matches the NS9530 finishing intent and the specific machining stability; the right chipbreaker combined with the SNGG geometry supports stable chip control in continuous cuts. What are the key dimensions to check during setup? Confirm the insert designation SNGG090308-01, the 3.18 mm plate thickness, 0.8 mm corner radius and the cylindrical hole to ensure correct seating and clamp compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090308 NS9530 Wendeplatten - Tungaloy
Combine precise finishing and low cutting forces with the uncoated cermet NS9530 and a 0.8 mm corner radius for reliable surface quality in turning operations. Order the SNGG090308-01 insert directly via Metav Werkzeuge or ask our consultants for application guidance. SNGG 090308 NS9530 – Turning Insert by Tungaloy The SNGG090308-01 NS9530 Tungaloy insert is an ISO-standard square turning insert optimised for fine finishing on steel in continuous-cut applications. ISO‑standard square insert Uncoated cermet NS9530 for finishing 0° clearance angle for stable cutting 0.8 mm corner radius, 3.18 mm thick Engineered for consistent, high-quality finishing The combination of uncoated cermet construction and the NS9530 grade provides a precision finishing solution that keeps cutting forces low while producing superior surface appearance. The material choice delivers a sharp cutting edge that supports continuous cutting and small depth-of-cut strategies, translating into more efficient productivity and reduced need for rework in finishing passes. Designed for predictable holder compatibility and rigidity Compatibility follows ISO conventions: the insert’s square form and dimensional tolerances ensure secure fitment when matched to the correct external holder or boring bar. The ISO‑standard designation, combined with a 0° clearance angle and a cylindrical hole, supports consistent clamping and repeatable positioning, which reduces vibration and improves dimensional stability on turned components. Geometry that reduces forces and enhances surface finish The square form with a 0.8 mm corner radius balances strength and edge sharpness to deliver smooth finishes on steel. A 3.18 mm thickness provides adequate support under cutting load while allowing smaller depths of cut; the result is lower power draw and uniform contact conditions that favour excellent surface integrity during finishing operations. System approach and recommended use Select the matching chipbreaker and grade to suit workpiece stability and cutting mode; chipbreaker 01 pairs well with the NS9530 grade for continuous operations. The insert is intended for turning applications on steel, where continuous cutting and fine surface results are priorities. Typical system components include the insert, an appropriate external holder or boring bar, a seat/clamp set and replacement screws to complete the toolset. For precision finishing in steel, contact Metav Werkzeuge to discuss the Tungaloy NS9530 SNGG turning insert and arrange availability or application support. Technical Data Article number: 6997811 SKU: 6997811-Tungaloy Manufacturer SKU: TUN6997811 Brand: Tungaloy Model series: ISO turning indexable inserts ISO designation: SNGG090308-01 Facts Corner radius: 0.8 mm Clearance angle: 0° Plate thickness: 3.18 mm Insert size: 09 Hole style: cylindrical Included angle: 90° Special features Grade: NS9530 (uncoated cermet) Chipbreaker: 01 Material: carbide Application: turning, finishing steel Insert form: square System components: holder/boring bar, seat/clamp set, replacement screws Suitable for continuous cuts and small depths of cut FAQ What materials is this insert intended for? The SNGG090308-01 NS9530 insert is primarily intended for finishing operations in steel, where the uncoated cermet grade offers a sharp edge and excellent surface results. How does the corner radius influence the surface finish? A 0.8 mm corner radius reduces cutting pressure peaks and helps produce a more uniform surface texture while maintaining sufficient edge strength for finishing passes. Which holder features are required for correct fitting? Compatibility depends on match of shape, clearance, tolerance class, fastening method, size and thickness; the ISO designation ensures straightforward matching with corresponding external holders and boring bars. Is the insert coated? No, this insert uses an uncoated cermet composition in grade NS9530 to provide a very sharp cutting edge ideal for continuous finishing cuts. Where can the article and SKU be found for ordering? Order reference details: article number 6997811 and SKU 6997811-Tungaloy should be used when enquiring about the SNGG090308-01 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090308 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade and a robust 90° square form to achieve reliable turning results and consistent surface quality; the TH10 universal grade reduces cutting forces in non‑ferrous materials while the 0.8 mm corner radius balances edge strength and finish — order through Metav Werkzeuge or consult our specialists for application support. SNGG 090308 TH10 ISO turning insert SNGG090308-01 for turning by Tungaloy SNGG 090308 TH10 is an ISO‑standard square insert designed for general turning tasks, offering a sharp, uncoated carbide grade optimised for non‑ferrous work and low cutting forces. Square 90° geometry for versatile turning Uncoated carbide TH10 universal grade 0.8 mm corner radius for balanced finish Cylindrical hole for secure and repeatable clamping Sharp, low‑force cutting for cleaner surfaces The combination of an uncoated carbide cutting edge and the TH10 universal grade delivers low cutting forces that help to produce cleaner surface finishes when machining softer or non‑ferrous materials. This characteristic makes the insert particularly suitable where minimal cutting resistance is required; lower forces reduce vibration risk and can improve tool life in less rigid setups. The result is a pragmatic improvement in process stability and predictable outcomes during both roughing and finishing operations. Predictable fit and secure mounting for production reliability Designed to the ISO turning insert standard, compatibility with holders is determined by the insert’s form, clearance angle (0°), tolerance class, fastening method, size and thickness. The cylindrical hole and the 3.18 mm plate thickness ensure secure seating and repeatable location in the clamping system, which supports consistent cutting geometry across repeats. Clear definition of these parameters simplifies toolroom setup and reduces downtime from re‑clamping or misalignment. System readiness and recommended turning applications As part of an ISO indexable system, the insert works in combination with a matching external holder or boring bar, a shim/clamping set and replacement screws. Typical use is for external and internal turning; selection of the appropriate chipbreaker (01) and the TH10 grade should be matched to the workpiece material and machining stability. The 0.8 mm corner radius and the 90° square shape provide a practical compromise between edge strength and surface finish, supporting reliable material removal and consistent component quality in production environments. Discuss the SNGG 090308 TH10 insert with Metav Werkzeuge for tailored holder compatibility and immediate availability — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for technical advice and order handling Technical data Article number: 6806498 Manufacturer SKU: TUN6806498 Label: SNGG090308-01 TH10 Tungaloy insert Facts Corner radius: 0.8 mm Insert angle: 90° Thickness: 3.18 mm Size: 09 Manufacturer item number: 6806498 Special features Grade: TH10 (uncoated) Material: uncoated carbide Hole: cylindrical hole Shape: square Chipbreaker: 01 Application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert suited for? The TH10 grade and the uncoated carbide construction are intended primarily for non‑ferrous materials and applications where a sharp, low‑force edge produces cleaner surfaces; the SNGG090308-01 insert performs well under those conditions. How is the insert secured in a holder? This ISO insert features a cylindrical hole for secure clamping; compatibility is achieved via correct holder form, clearance angle (0°), tolerance class, fastening method, size and thickness. Which chipbreaker should be used with this insert? The insert is supplied with chipbreaker 01; selection should be matched to the workpiece material, cutting parameters and machine rigidity to ensure controlled chip formation. Can the insert be used for internal and external turning? Yes — the indexable insert is suitable for both external and internal turning when paired with the appropriate external holder or boring bar and correct clamping hardware. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius offers a balance between edge strength and surface finish, improving tool life under moderate cutting forces while maintaining a good machined surface. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com