SDQC L2020K Wendeplatten - Tungaloy
A precisely engineered, ISO‑compliant carbide indexable insert combining 15° relief and 90° square geometry for dependable external and internal turning; order through Metav Werkzeuge or consult our specialists for integration into the tool system. SDQC L2020K SDQCL2020K Tungaloy turning insert — 90° square, 15° relief SDQCL2020K is an ISO‑format indexable turning insert for external and internal turning, featuring a square geometry, 15° clearance and a cylindrical hole with double‑sided countersink. Carbide construction for stable tool life ISO L2020K format for broad compatibility 15° relief for secure cutting clearance Cylindrical hole with 70°–90° countersink Precision and consistent results for general turning operations The carbide composition delivers stable wear resistance and consistent performance during series production and short runs alike. As an ISO‑standard indexable insert, the component offers predictable tool life and repeatable geometry, supporting process reliability in turning. The 90° geometry provides full‑face contact for shoulder and profile turning, while the 15° relief prevents rubbing and reduces cutting forces. The SDQCL2020K is supplied without a chipbreaker, so selecting the correct chipformer or insert grade for the workpiece material is essential to achieve the intended surface finish and swarf control. Compatibility and secure clamping across ISO holders Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening and insert dimensions; the ISO L2020K designation ensures straightforward matching to standard square‑insert holders. The 2.38 mm thickness and L2 size are decisive for stability under cutting loads and must be matched to the holder pocket and screw arrangement. The central cylindrical hole combined with the double‑sided countersink (70°–90°) permits reliable clamping using standard screws and clamping sets, reducing mounting time and ensuring repeatable positioning when inserts are indexed or replaced. Geometry, material and application guidance in practice The combination of carbide material, square plate form and the specified hole geometry makes this insert a versatile option for external and internal turning across a wide range of steels and non‑ferrous materials when the correct grade is chosen. The absence of an integrated chipbreaker means the insert is suited to operations where chip control is managed by toolpath, cutting parameters or an external chipformer. When machining interrupted cuts or heavy cross‑sections, the robust square form and 90° corner support help maintain dimensional stability and reduce deflection. For system setup, confirm holder compatibility by comparing form, 15° relief, pocket tolerance and insert thickness. For product availability or technical advice on Tungaloy inserts such as the SDQCL2020K, contact Metav Werkzeuge for precise application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806282 Manufacturer SKU: TUN6806282 Product SKU: 6806282-Tungaloy Manufacturer: Tungaloy Model series: ISO‑turning indexable inserts Facts Relief angle: 15° Geometry angle: 90° Thickness: 2.38 mm Size: L2 Countersink angle range: 70°–90° Special features Material: carbide Shape: square Hole style: cylindrical hole + double‑sided countersink (70°–90°) Chipbreaker: none Typical application: external and internal turning ISO designation: L2020K Compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What work is this insert designed for? The SDQCL2020K insert is designed for general external and internal turning operations where a square, 90° geometry and 15° relief are advantageous. Which materials can be machined with this insert? As a carbide indexable insert, the SDQCL2020K performs well on a range of steels and common non‑ferrous materials when paired with the correct insert grade and cutting parameters. How is the insert fastened in the holder? The SDQCL2020K uses a central cylindrical hole with a double‑sided countersink (70°–90°) to permit secure clamping with standard screws and clamping sets in ISO holders. Is there a chipbreaker on this insert? This insert is supplied without a chipbreaker; chip control must be achieved via cutting conditions, toolpath strategy or a dedicated chipformer if required. How to ensure holder compatibility for this insert? Confirm holder pocket form, pocket angle, tolerance class, fastening method, insert thickness (2.38 mm) and L2 size; these determine whether the insert fits securely and performs as expected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SDQC R2020K Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard compatibility, robust carbide construction and a secure countersunk mounting for stable, repeatable turning results; order directly via Metav Werkzeuge or request tailored machining advice from our consultants. SDQC R2020K turning insert (SDQCR2020K) by Tungaloy — carbide, 15° clearance The SDQCR2020K is an ISO‑standard square turning insert designed for general external and internal turning, offering a 15° clearance and an R2 nose radius for consistent edge engagement. ISO‑standard square insert R2020K Carbide body for reliable tool life 15° clearance angle for stable cutting Countersunk hole (70°–90°) for secure clamping Productive, repeatable performance for daily turning operations The insert is manufactured from carbide and produced to ISO dimensions, which ensures consistent cutting performance and interchangeability with ISO holders. The 15° clearance angle reduces rubbing on the flank and supports stable cutting conditions, while the R2 nose radius balances strength and surface finish. As an ISO turning insert, the component is suited to serial production where reproducibility and low downtime are priorities; reduced tool changes and predictable wear contribute to higher process efficiency and lower unit cost per part. Secure clamping and predictable seating for repeatability A cylindrical hole with a double‑sided countersink (70°–90°) provides a positive seat and reliable torque transmission to the clamping system, ensuring the cutting edge remains stable under load. The 2.38 mm thickness and square form give four indexable edges, which supports efficient tool utilisation and straightforward indexing. This variant is supplied without a chipbreaker, offering flexibility where chip control is managed by the holder geometry or process parameters; the absence of an integrated chipbreaker can benefit finishing passes or materials where an external chipformer is preferred. Practical compatibility and selection guidance for toolmakers Compatibility with a given holder is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness — all ISO‑governed parameters that simplify selection for workshop engineers. The insert is intended for external and internal turning and integrates into systems comprising an ISO insert, a matching external holder or boring bar, clamping set and replacement screws. For users less familiar with insert‑to‑holder matching, choosing the correct grade and chipformer (where required) will determine surface finish, tool life and cutting stability; these choices should be aligned with workpiece material and machining strategy. For machining projects that demand reliable, ISO‑compliant carbide performance, contact Metav Werkzeuge to discuss the SDQC R2020K insert and obtain expert recommendations or delivery options Technical data Manufacturer article number: 6806283 Manufacturer SKU: TUN6806283 SKU: 6806283-Tungaloy Model series: ISO‑Drehwendeschneidplatten Core specifications Thickness: 2.38 mm Clearance angle: 15° Included angle: 90° Plate size / nose radius: R2 Special features Carbide material Square plate form Cylindrical hole with double‑sided countersink (70°–90°) Without chipbreaker Designed for turning (external and internal) ISO‑standard geometry for holder compatibility FAQ What applications is this insert best suited for? The SDQCR2020K insert by Tungaloy is designed primarily for external and internal turning operations where ISO‑standard geometry and a 15° clearance support stable cutting and reproducible results. Can the insert be used in any ISO holder? Compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness; the SDQCR2020K follows ISO dimensions to simplify matching with compliant holders. Why is there no chipbreaker on this variant? This variant is supplied without a chipbreaker to allow users to rely on holder geometry or process‑specific chip control; it is suitable for finishing operations or where an external chipformer is preferred. How many cutting edges does the square insert provide? The square form and 2.38 mm thickness allow multiple indexable edges, enabling efficient use of the carbide insert before replacement. What is the manufacturer article and SKU for ordering? The manufacturer article number is 6806283 and the SKU is 6806283‑Tungaloy; TUN6806283 is provided as the manufacturer SKU. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNEN 12T2ZF TH10 Wendeplatten - Tungaloy
The SNEN12T2ZF TH10 combines a sharp uncoated carbide grade and a 90° square geometry to deliver low cutting forces and clean surface results in milling. Its compact 12 mm size and 2.78 mm thickness make it suitable for precise shoulder and face operations. Order the SNEN12T2ZF TH10 directly via Metav Werkzeuge or ask our consultants if needed. SNEN12T2ZF TH10 SNEN milling indexable insert — 12 mm, 90° | Tungaloy The SNEN12T2ZF TH10 is a square indexable insert for milling applications, optimised for non-ferrous materials and operations that demand low cutting forces and fine surface quality. Sharp uncoated carbide grade TH10 Square 12 mm form with 90° geometry Thin 2.78 mm plate for precise shoulder work No chipbreaker for clean surface finishes Efficient milling with reduced cutting forces The SNEN12T2ZF TH10 is specified as an uncoated carbide insert in the TH10 grade, engineered for applications where a low cutting force and a clean finished surface are priorities. The sharp cutting edge of the TH10 grade reduces power demand and heat generation during milling, which supports longer tool life in many setups. Where high metal removal rates are not the main objective, this insert delivers consistent, controllable cutting behaviour that improves process stability and reduces rework. Precise geometry and reliable fit for production A square form with a 90° cutting angle and a 2.78 mm thickness gives the insert good support in the tool seat and predictable engagement in shoulder and face milling. The system requires that the insert seat, geometry and milling body match technically; correct assembly ensures repeatable clamping and reliable cutting performance on serial or small-batch production tasks. Using a matched Tungaloy tool body minimises vibrations and helps to preserve the integrity of the cutting edge during operation. Material suitability and surface quality advantages The TH10 grade is described as a universal sharp grade for non-ferrous materials, making it particularly suitable for aluminium alloys, brass and other NFM applications where burr-free edges and smooth finishes matter. Because the grade is uncoated, adhesion of soft materials is reduced and the cutting edge remains keen, which helps to produce clean contours and accurate shoulders. In situations where thermal load is moderate and friction is controllable, this insert achieves a favourable balance between surface quality and economy. Practical handling and production benefits With a compact 12 mm size and a square configuration, the insert offers straightforward inventory management and quick indexing when edges are refreshed. The absence of a chipbreaker simplifies selection for applications that require uninterrupted chip flow or specific chip control strategies at the tool-body level. When combined with appropriately rated tool holders and correct cutting parameters, the insert contributes to shorter cycle times through stable cutting and reduced secondary operations. For technical advice or to order the SNEN12T2ZF TH10 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — consultants can confirm compatibility with the chosen milling body and application. Technical Data Article number: 6806450 Manufacturer SKU: TUN6806450 SKU: 6806450-Tungaloy Manufacturer: Tungaloy Facts Size: 12 mm Thickness: 2.78 mm Geometry: Square, 90° Relief angle: 0° Hole: without hole Special features Grade: TH10 (uncoated carbide) Application: Milling (face, shoulder, slot, high-feed, contour) Series: Milling indexable inserts Chipbreaker: none Material: Carbide FAQ What milling tasks are suitable for this insert? The SNEN12T2ZF TH10 indexable insert from Tungaloy is suitable for face, shoulder, slot, high-feed and contour milling where low cutting forces and good surface finish are required. Which materials can be machined with the TH10 grade? The TH10 grade is a sharp, uncoated carbide intended primarily for non-ferrous materials; it supports clean surfaces and lower cutting forces in applications such as aluminium and similar alloys. How can compatibility with a milling body be ensured? Insert seat, geometry and the milling body must technically match; verify that the tool holder accepts SNEN12T2ZF geometry and clamping before assembly to guarantee correct fit and performance. Does this insert have a chipbreaker? No, this variant is supplied without a chipbreaker, which supports uninterrupted chip evacuation and is suited to operations where chip form is managed at the tool-body level. What advantages does the 90° square geometry offer? A 90° square geometry provides robust edge support for shoulder milling and face operations, giving stable engagement and predictable dimensional control when paired with a compatible tool holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNEN 12T2ZT UX30 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge and the UX30 uncoated carbide grade for efficient chip formation and low cutting forces, ensuring steady production on compatible milling systems. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the technical team for fitment and process optimisation. SNEN SNEN12T2ZT UX30 — Tungaloy indexable insert for milling, uncoated carbide, 90° square The SNEN SNEN12T2ZT UX30 is a square indexable insert intended for a wide range of milling tasks; designed for face, shoulder, slot, high‑feed and contour milling when paired with matching Tungaloy cutters. Tungaloy uncoated UX30 grade Sharp cutting edge for low cutting forces Square 12 mm plate, 90° geometry Compatible with Tungaloy milling systems Improved productivity through low cutting forces and reliable chip formation The combination of the UX30 grade and an uncoated carbide substrate offers a decisive advantage where low cutting forces and consistent chip formation are required. The geometry provides a sharp cutting edge, which reduces cutting resistance and can extend tool life in applications where material removal rates are moderate. In practice, this means reduced spindle load and the potential for higher feed rates in stable setups, lowering cycle times while maintaining dimensional accuracy. For users seeking a balance between performance and cost efficiency, the design delivers straightforward, repeatable results in a production environment. Robust design and system compatibility for predictable machining A square 12 mm plate with 90° geometry and a relief angle of 0° ensures positive seating and stable clamping in Tungaloy milling bodies. The plate’s indexable insert format simplifies reconditioning: when one cutting edge dulls, the plate can be rotated to present a fresh edge, minimising downtime. Absence of a central hole and lack of a chipbreaker indicate a straightforward clamping requirement and a geometry optimised for low cutting forces rather than aggressive chip splitting. Such a configuration supports predictable tool behaviour across a variety of steels and common workshop alloys when matched to the appropriate cutter body. Application guidance and process considerations for milling operations Intended for general milling, the insert is suitable for face, shoulder, slot, high‑feed and contour milling within the constraints of the associated tool family; the uncoated carbide grade performs well in operations prioritising surface quality and chip control under moderate cutting speeds. When integrating the plate into a toolset, ensure plateseat, geometry and cutter body are technically compatible with the Tungaloy system. For optimum results, select feeds and speeds according to material and machine stability; the plate’s combination of grade and geometry supports steady performance in batch production and jobbing alike. Technical enquiries are handled by Metav Werkzeuge, whose team can advise on selection and machining parameters. For genuine Tungaloy inserts and application support, contact Metav Werkzeuge for ordering and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806451 Manufacturer SKU: TUN6806451 SKU: 6806451-Tungaloy Model series: Fräswendeschneidplatten ISO designation: SNEN12T2ZT Specifications Plate size: 12 mm Plate thickness: 2.78 mm Geometry angle: 90° Relief angle: 0° Plate form: square Central hole: without hole Chipbreaker: without Materials & features Material: carbide Grade/coating: UX30, uncoated Cutting edge: sharp edge for low cutting forces Applications: face, shoulder, slot, high‑feed and contour milling (system dependent) System requirement: compatible Tungaloy milling systems; matching plate seat and cutter geometry required FAQ What is the primary benefit of the UX30 grade? The UX30 grade provides a sharp uncoated carbide edge that promotes consistent chip formation and lower cutting forces, improving productivity with stable cutting parameters. Is the insert suitable for high‑feed applications? The plate is listed for high‑feed milling among other operations; suitability depends on the associated cutter family and machine stability when using the SNEN12T2ZT insert. Does the insert include a chipbreaker or central hole? This indexable plate is supplied without a chipbreaker and without a central hole, which requires a compatible clamping arrangement on the milling body. Which materials can be machined with this insert? The insert’s uncoated carbide and sharp geometry are intended for a broad range of milling tasks; selection of feeds and speeds should be adapted to the workpiece material and process requirements. How is the insert mounted and indexed? The square plate installs in a matching Tungaloy cutter seat and is indexed by rotating to present a fresh cutting edge; correct seating and screw torque are essential for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGA 090304 TH10 Wendeplatten - Tungaloy
Benefit from the combination of ISO compatibility, a TH10 uncoated cemented carbide grade and a compact 0.4 mm corner radius for low cutting forces and consistently clean surface finishes; order the inserts directly via Metav Werkzeuge or consult our technical advisors for application-specific selection. SNGA090304 TH10 indexable turning insert by Tungaloy — uncoated carbide, square 90° SNGA090304 TH10 is an ISO‑standard indexable insert for turning, optimised for clean finishing and low cutting forces in non‑ferrous materials. ISO‑compliant square insert 90° geometry TH10 uncoated cemented carbide grade 0.4 mm corner radius for precise edge control With cylindrical hole, 3.18 mm plate thickness Efficient performance for turning operations The SNGA090304 TH10 insert delivers a clear performance advantage where reduced cutting forces and superior surface quality are priorities. The TH10 grade is an uncoated cemented carbide designed as a sharp universal grade for non‑ferrous materials and tasks that benefit from a clean cutting edge. Compatibility with standard toolholders is governed by insert form, 0° clearance, tolerance class, fixation method, size and thickness; this ensures predictable performance when integrated into established ISO tool systems. By favouring lower cutting forces, the insert helps to limit workpiece distortion and supports finer surface finishes with fewer secondary operations. Compatibility that simplifies tooling decisions Selection and assembly are simplified by the ISO‑compliant geometry: the square plate with a 90° approach angle and a cylindrical hole ensures secure clamping and straightforward replacement. The insert’s dimensions — 3.18 mm plate thickness and 0.4 mm corner radius — match common holder specifications, allowing direct substitution in many turning setups. Because chip control is application dependent and this grade is supplied without a chipbreaker, choosing an appropriate chip control solution or holder with integrated features is recommended for heavy interrupted cuts or for materials that demand active chip management. Increased shop‑floor productivity and surface quality On the shop floor, the combination of a sharp uncoated edge and compact corner radius reduces cutting resistance and can shorten cycle times for finishing passes. The mechanical simplicity of an uncoated grade reduces reliance on specialised coatings when machining aluminium alloys and softer non‑ferrous metals, while delivering repeatable tool life under stable cutting conditions. Fewer cutting forces often translate into reduced vibration and improved dimensional stability, benefiting both productivity and process reliability in high‑mix or contract turning environments. Practical guidance for material applications and handling This insert is intended primarily for turning applications involving non‑ferrous workpiece materials where a clean surface and low cutting force are desired. For optimal results, pair the insert with a holder matched to the ISO form and ensure tightening torques and seating surfaces are clean and within tolerance. If operations include tougher alloys or interrupted cuts, evaluate alternative grades or holders with active chip control. For tailored recommendations on feeds, speeds and holder selection, Metav Werkzeuge’s consultants can provide application‑specific guidance to align the insert’s strengths with production goals. For availability, technical specification matching and order placement of Tungaloy SNGA090304 TH10 indexable turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert support Technical Data Article number: 6806452 Manufacturer SKU: TUN6806452 Model series: ISO‑Drehwendeschneidplatten Facts Plate thickness: 3.18 mm Corner radius: 0.4 mm Geometry: square, 90° Clearance angle: 0° ISO designation: 090304 Special features Grade: TH10 (uncoated cemented carbide) Insert form: SNGA With hole: cylindrical hole Chipbreaker: without Typical application: turning FAQ What materials is this insert best suited for? The SNGA090304 TH10 insert from Tungaloy is optimised for non‑ferrous materials and applications where an uncoated, sharp cutting edge supports low cutting forces and a clean surface finish. How is holder compatibility determined for this insert? Holder compatibility depends on the insert form, 0° clearance, tolerance class, fixation, size and thickness; verify matching holder specifications before installation. Does this insert include a chipbreaker? This version is supplied without a chipbreaker; chip control should be provided by the selected holder or by choosing a dedicated chipbreaking geometry. What are the key dimensional data to check before ordering? Confirm plate thickness 3.18 mm, corner radius 0.4 mm, square 90° geometry and the ISO code 090304 when matching to toolholders and clamping sets. Is the SNGA090304 TH10 suitable for finishing passes? Yes, the TH10 uncoated grade and sharp edge are particularly suited to finishing tasks that require low cutting forces and high surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120402 BX360 Wendeplatten - Tungaloy
High accuracy and durable edge life result from the combination of BX360 CBN grade and ISO SNGA geometry; the insert is engineered for consistent finishing on hard materials and minimal rework. Reliable seating and a 0.2 mm corner radius deliver repeatable surface quality across serial production. Order the SNGA120402-QBN BX360 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNGA120402-QBN BX360 turning indexable insert by Tungaloy — ISO geometry SNGA120402-QBN BX360 is an ISO-format square indexable insert for precision turning, optimised for finishing hardened steels and, where applicable, cast iron. CBN grade BX360 for hardened steels ISO SNGA geometry for standard holders 0.2 mm corner radius for precise finishes Cylindrical hole for secure clamping High-performance cutting for hardened components The use of CBN in the BX360 grade provides high wear resistance and thermal stability when machining hardened steels, reducing flank wear in demanding end‑turning operations. This translates into longer uninterrupted tool life and fewer insert changes, which contributes to lower overall process costs. The brittle yet heat‑stable nature of the cutting material enables fine, consistent surface finishes in the final pass, so there is less need for secondary grinding. Predictable geometry and secure clamping for repeatable results Built to the ISO SNGA form, the insert delivers a defined seating datum and repeatable orientation in appropriately rated toolholders. The SNGA120402-QBN configuration pairs a square outline with a 90° included angle and 0° clearance, while the 4.76 mm thickness and 0.2 mm corner radius ensure mechanical stability under interrupted or stable cuts. A cylindrical hole provides positive clamping and simplifies index changes, reducing set‑up time and improving batch consistency. Application guidance: finishing, process stability and economy With the QBN chipbreaker, this insert is optimised for finishing passes where surface integrity and dimensional accuracy are priorities; the geometry controls chip form while preserving the strong CBN cutting edge. Depending on the specific variant, the grade also tolerates some cast iron operations, but the principal advantage is in machining high‑hardness steels where abrasive wear is the limiting factor. When combined with stable tooling and correct cutting data, the result is a reliable, economical finishing process that minimises scrap and rework. Contact Metav Werkzeuge for personalised application advice and to secure supply of Tungaloy SNGA120402-QBN BX360 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806453 Manufacturer SKU: TUN6806453 SKU: 6806453-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Size: 12 mm Thickness: 4.76 mm Angle: 90° Corner radius: 0.2 mm ISO code: 120402 Special features Material: carbide Cutting material: CBN (cubic boron nitride) BX360 Chipbreaker: QBN Application: turning Form: square Relief angle: 0° Hole style: cylindrical hole Compatibility: ISO toolholders (form, clearance, tolerance, fastening, size, thickness) FAQ What materials is this insert designed for? The Tungaloy SNGA120402-QBN BX360 insert is primarily designed for hardened steels and, dependent on the variant, can also be used for certain cast iron finishing applications. What advantages does the BX360 CBN grade provide? BX360 CBN gives improved wear resistance and thermal stability compared with carbide in high‑hardness turning; this yields longer tool life and more consistent surface quality when finishing hardened parts. Is the SNGA geometry compatible with standard holders? Yes, the ISO SNGA120402-QBN form is compatible with ISO‑rated holders; correct seating depends on matching form, relief angle, tolerance class, fastening and thickness. Which chipbreaker should be selected for fine finishes? The QBN chipbreaker fitted to this insert is recommended for finishing operations where chip control and surface integrity are required. How can process stability be maximised with this insert? Pair the insert with a rigid, vibration‑damped holder and appropriate cutting data; the combination of BX360 CBN cutting material and secure clamping produces repeatable results and reduces rework. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120404 BX360 Wendeplatten - Tungaloy
Benefit from the combination of CBN performance, ISO compatibility and a compact 12 mm square format for consistently reliable hardened-steel finishing. The shorter contact length and robust corner radius deliver predictable tool life and surface quality; order the insert directly via Metav Werkzeuge or consult our specialists for selection support. SNGA 120404 BX360 — Turning insert (CBN) by Tungaloy The SNGA120404 BX360 is an ISO-standard CBN insert engineered for precision turning of hardened steels and, depending on the version, cast iron. ISO-standard square insert 12 mm CBN grade BX360 for hardened steels 0° clearance angle for stable engagement High-performance CBN for hardened-steel finishing The BX360 grade uses cubic boron nitride (CBN) to deliver high wear resistance and thermal stability in demanding finishing operations. Compared with conventional carbide grades, this abrasive cutting material maintains edge integrity at elevated temperatures and under heavy rubbing conditions, making it a prime choice for end-of-line turning where consistent surface finish and dimensional accuracy are required. The design focusses on minimal flank wear and repeatable results on high-hardness components. ISO compatibility and secure clamping for process reliability Built to the ISO series for indexable turning, the insert’s square form and standard dimensions ensure compatibility with a wide range of external holders and boring bars. Key dimensions that determine match and clamping behaviour are the 12 mm inscribed size, 4.76 mm thickness and 0.4 mm corner radius, together with the 0° clearance specification and the standard 90° cutting angle. These measurable values simplify tool selection, reduce setup time and support consistent seating and repeatability in serial production. Production benefits: stability, surface quality and application focus With no chipbreaker fitted, this insert is optimised for finishing passes where uninterrupted cutting contact and predictable chip flow are priorities. The robust corner radius contributes to stable engagement and improved surface integrity while the carbide mounting substrate under the CBN layer gives mechanical support for a long service life. As part of an ISO insert system the component integrates with holders, clamping sets and replacement screws to form a complete, reproducible tooling solution for hardened-steel turning operations. For specification advice or to order Tungaloy SNGA120404 BX360 inserts for hardened-steel turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application matching and delivery options. Technical data Article number: 6806460 SKU: 6806460-Tungaloy Manufacturer SKU: TUN6806460 Designation: SNGA120404 BX360 Manufacturer: Tungaloy Core data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Tool angle: 90° Special features Material: carbide Cutting material: cubic boron nitride (CBN) Grade/coating: BX360 Shape: square Hole: with cylindrical hole Chipbreaker: without Application: turning Series: ISO turning indexable inserts FAQ What materials is this insert designed to machine? The SNGA120404 BX360 insert is specified for machining hardened steels and, depending on the exact grade configuration, is also applicable to certain cast-iron operations. How does the BX360 grade differ from standard carbide inserts? BX360 uses cubic boron nitride (CBN) as the cutting medium; compared with carbide, this gives superior wear resistance and edge stability when finishing hard materials, which reduces rework and improves surface quality for high‑hardness parts. Which holder features must match for safe use? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; selecting an ISO-compatible holder that matches the SNGA120404 dimensions ensures secure clamping and repeatable seating. Is this insert suitable for finishing passes without a chipbreaker? Yes, the absence of a chipbreaker indicates that the geometry is intended for finishing cuts where continuous cutting contact and consistent surface finish are the priority rather than aggressive chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120404 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of PCD cutting material, high cutting speeds, and precise geometry for efficient aluminium turning — order directly via Metav Werkzeuge or contact our consultants for application support. SNGA 120404 DX140 Tungaloy indexable turning insert (PCD) for turning The SNGA 120404 DX140 is an ISO indexable turning insert designed for external and internal turning of aluminium, non‑ferrous metals and abrasive non‑metallic materials. ISO indexable insert SNGA 120404 DX140 PCD cutting material for aluminium and non‑ferrous Square shape, 12 mm size, 90° cutting angle 0.4 mm corner radius for precise profiling Cylindrical hole, 4.76 mm thickness for secure clamping Boost throughput with PCD technology and high cutting speeds The use of polykristalliner Diamant (PCD) in the cutting material provides a decisive productivity advantage when machining non‑ferrous alloys. Thanks to the DX140 grade, the insert enables high cutting speeds and delivers a very long tool life, especially on abrasive aluminium alloys and other non‑ferrous materials. This directly reduces tool changes and downtime, improving process economy in serial and continuous production. For applications requiring rapid material removal at stable surface quality, the PCD grade offers predictable performance and repeatable results. Stable clamping and geometry for reliable turning The square form and 90° cutting angle create a robust seating and allow multiple indexed edges per insert, increasing usable edge life. The cylindrical hole and 4.76 mm plate thickness ensure secure clamping in compatible ISO holders; compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness. The moderate 0.4 mm corner radius supports precise profiling and maintains edge strength for light to medium cuts, supporting consistent dimensional accuracy across workpieces. Applications, material range and process benefits Designed for turning, the insert is optimised for aluminium, non‑ferrous metals and abrasive non‑metallics, where PCD excels. The carbide substrate provides stable support for the diamond cutting layer, combining toughness with wear resistance. With no integrated chipbreaker (without chipbreaker), process planning should consider feed and depth settings to manage chip formation; where required, select an appropriate holder or downstream chip control. The result is lower total tooling cost per part, improved surface finish and fewer interruptions for insert changes. Contact Metav Werkzeuge today for tailored advice and to secure the Tungaloy SNGA 120404 DX140 indexable insert for high‑speed aluminium turning Technical Data Article number: 6806458 Manufacturer SKU: TUN6806458 Stock SKU: 6806458-Tungaloy Model series: ISO indexable turning inserts Core data ISO designation: 120404 Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 90° Clearance angle: 0° Plate form: square Hole: with hole — cylindrical hole Materials & features Material: cemented carbide substrate Cutting material: PCD (polykristalliner Diamant), grade DX140 Application: turning (external and internal) Chipbreaker: without chipbreaker System components: ISO insert, suitable holder and clamping set required FAQ Which materials are suitable for this insert? The SNGA 120404 DX140 Tungaloy indexable turning insert is specified for aluminium, non‑ferrous metals and abrasive non‑metallic materials, where the PCD cutting material provides high wear resistance and extended life. Is this insert suitable for roughing or finishing operations? With a 0.4 mm corner radius and no integrated chipbreaker, the insert is particularly well suited to finishing and light to medium cutting tasks; for heavy roughing, pairing the insert with an appropriate holder and cutting parameters is recommended. How is compatibility with tool holders ensured? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the SNGA 120404 DX140 must be matched to an ISO‑compatible holder that accepts square inserts with a cylindrical hole. What advantages does the DX140 PCD grade offer? The DX140 grade delivers high cutting speeds and very long tool life in aluminium and non‑ferrous machining, reducing tool changes and improving process efficiency for high‑volume production. What are the manufacturer and item references for ordering? Manufacturer article number: 6806458; Stock SKU: 6806458‑Tungaloy; Manufacturer SKU: TUN6806458 — refer to these identifiers when specifying the Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120404 GT720 Wendeplatten - Tungaloy
Take advantage of the combination of consistent finishing performance, stable chip control and ISO‑compatible geometry to maintain productive turning processes. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. SNGA 120404 GT720 SNGA — Tungaloy turning insert, cermet grade for finishing SNGA120404 GT720 Tungaloy is an ISO‑normed square turning insert designed for finishing and light turning of steel components. ISO‑standard square insert GT720 cermet for fine finishing 0.4 mm corner radius for fine profiles 0° clearance angle, 90° cutting orientation Improved surface quality with a cermet finishing grade The GT720 cermet composition is developed for the finishing to light machining stages where surface finish and dimensional accuracy matter most. As a cermet‑based substrate, the grade reduces built‑up edge formation and promotes uniform wear, which supports repeatable part tolerance and reduces the need for rework. The combination of hard phases and a wear‑resistant matrix gives greater resilience on interrupted cuts and gentle feeds, translating into fewer scrap parts and a more reliable production output. ISO geometry that simplifies holder selection and setup Designed as an ISO‑standard square insert (SNGA120404), the component matches common seat forms and clamping systems when the holder's form, clearance angle, tolerance class, fastening and size correspond. The insert’s 12 mm size and 4.76 mm thickness, together with the cylindrical mounting hole, ensure straightforward mounting in most standard outside holders and boring bars. The 0° clearance angle and 90° cutting orientation provide stable shoulder control and make the geometry suitable for versatile external and internal turning operations where rigidity and repeatability are required. Application guidance for reliable, productive turning The insert is intended primarily for turning steel in finishing operations; selecting the appropriate chipbreaker and the GT720 sort according to workpiece stability and machining strategy is essential. With a 0.4 mm corner radius, the insert delivers fine profile definition while still allowing modest feed rates. As part of a complete system—indexable insert, matched holder, underlay/clamp set and spare screws—the component contributes to shorter setup times and predictable tool life, supporting cost‑effective batch production and consistent surface quality. For targeted finishing on steel components, request compatibility checks and ordering support from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SNGA120404 GT720 insert and suitable holders Technical data Article number: 6853361 Manufacturer SKU: TUN6853361 SKU: 6853361-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Cemented carbide (cermet application) Shape: Square Facts Corner radius: 0.4 mm Insert size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Cutting orientation: 90° Manufacturer article number: 6853361 Special features Grade/coating: GT720 (cermet or coated cermet) ISO designation: SNGA120404 Mounting: with cylindrical hole Chipbreaker: without Recommended application: Turning (external and internal) System components: insert, appropriate outside holder/boring bar, underlay/clamp set, spare screws FAQ What materials is this insert best suited for? The SNGA120404 GT720 insert is optimised for steel finishing operations; the GT720 cermet grade focusses on surface quality and dimensional stability. Can the insert be used for internal and external turning? Yes, the geometry and mounting hole allow the indexable insert to be employed in both external holders and suitable boring bars for internal turning. How does the 0.4 mm corner radius affect the process? A 0.4 mm corner radius provides fine profile definition and supports improved surface finish while permitting controlled feeds for finishing passes. Does the SNGA120404 require a specific holder type? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; confirm with the holder specification to ensure correct seating and clamping. What advantage does the GT720 grade provide over conventional carbide? The GT720 cermet grade delivers superior surface finish and more uniform wear in finishing applications, reducing rework and enhancing repeatable dimensional control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120404 LX10 Wendeplatten - Tungaloy
Benefit from the combination of Tungaloy LX10 carbide durability, ISO SNGA120404 geometry and a 0.4 mm corner radius for stable cutting and consistent surface finish; order directly via Metav Werkzeuge or consult the technical team for application advice. SNGA120404 LX10 indexable insert for turning — Tungaloy The SNGA120404 LX10 is an ISO‑standard indexable insert designed for external and internal turning, offering a square form with a 0.4 mm corner radius and a cylindrical central hole for secure clamping. ISO SNGA 120404 geometry LX10 Tungaloy carbide grade 0.4 mm corner radius for strength 0° relief for predictable cutting Predictable geometry for consistent turning performance The ISO SNGA120404 geometry ensures repeatable seating and orientation in compatible holders. The square plate form with a cylindrical central hole and standard hole spacing creates a reliable clamping interface, reducing vibration and positional variation during machining. Compatibility to a holder depends on form, relief angle, tolerance class, fastening method, plate size and thickness; matching these parameters avoids unexpected runout and helps to maintain dimensional consistency in serial production. Because the insert is supplied without a chipbreaker, selection of an appropriate chip control strategy for the workpiece and operation is essential to secure continuous chip evacuation. Durable LX10 grade extends tool life under mixed conditions The LX10 grade developed by Tungaloy balances wear resistance, toughness and edge stability, delivering extended service life in a wide range of steels and alloyed materials. This composition helps to maintain a sharp cutting edge for longer periods, reducing change‑over frequency and increasing productivity. For operations that demand both surface integrity and economical tool consumption, the combination of the carbide substrate and the LX10 specification translates into lower tooling costs per part and fewer interruptions for tool changes. System compatibility and straightforward assembly for shop floors The insert integrates into a standard system build: ISO indexable insert, matching external holder or boring bar, appropriate shim and clamping screws. Key dimensions include a plate size of 12 mm, a thickness of 4.76 mm, an included angle of 90° and a 0.4 mm corner radius, which together determine the achievable corner strength and form tolerance on finished components. The tool is manufactured from carbide, providing the rigidity needed for stable turning; installers should verify holder form and tolerance to guarantee correct seating. Where required, choose a chipbreaker geometry or cutting parameters that suit the material and machining conditions to improve chip control and cycle reliability. Contact Metav Werkzeuge for availability and application recommendations on the Tungaloy SNGA120404 LX10 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct technical guidance and supply information. Technical data Article number: 6852091-Tungaloy Manufacturer SKU: TUN6852091 Manufacturer article number: 6852091 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° ISO code: 120404 Features Shape: square Hole: with cylindrical hole Grade: LX10 (Tungaloy) Material: carbide Application: turning (external and internal) Chipbreaker: none FAQ What materials is this insert suitable for? The LX10 grade and carbide substrate make the SNGA120404 LX10 suitable for a broad range of steels and alloyed materials, offering a compromise of wear resistance and toughness for general turning tasks. How does the absence of a chipbreaker affect machining? An insert without a chipbreaker, such as this SNGA120404 LX10, requires selection of an appropriate chip control method—either a holder with chip control geometry or adjusted cutting parameters—to ensure safe chip evacuation. Which holders are compatible with this ISO geometry? Compatibility is achieved with SNGA‑style external holders or matching boring bars that accept ISO 120404 inserts; correct seating depends on form, relief angle, tolerance class, fastening method, size and thickness. Can the insert be used for finishing and roughing? The LX10 grade provides a balance of edge stability and wear resistance that supports both medium finishing and semi‑roughing operations; process parameters should be adapted to the workpiece and machine rigidity. Is this insert indexable and reversible? Yes, the square form and ISO designation allow multiple indexing positions, providing several usable cutting edges per insert to improve economy during production. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGA 120404 LX11 Wendeplatten - Tungaloy
Benefit from the combination of LX11 wear resistance and a 0.4 mm corner radius for consistent part finish and prolonged tool life; the robust carbide construction supports predictable performance in routine turning tasks. Order the SNGA120404 insert directly via Metav Werkzeuge or ask our consultants if needed. SNGA120404 LX11 Tungaloy indexable turning insert — square, 0.4 mm radius, 90° SNGA120404 LX11 is a square ISO indexable insert engineered for external and internal turning, offering dependable edge stability and straightforward integration into standard holder systems LX11 carbide grade for extended tool life 0.4 mm corner radius for controlled finishes ISO 120404 square insert, 90° included angle With cylindrical hole for secure clamping Maximise uptime with durable cutting edges The LX11 grade, supplied by Tungaloy, combines wear resistance and balanced toughness to extend tool life while maintaining consistent cutting-edge condition. This property reduces unexpected tool changes and supports a stable production rhythm, which in turn improves process economics on batch and single-part runs. The carbide substrate and grade chemistry are optimised for turning operations where a reliable edge and repeatable surface quality are required. Results include fewer interruptions, more predictable component tolerances and a lower cost per finished part. Secure fit and predictable geometry across holder systems ISO standardisation ensures that the insert’s geometry and dimensions correspond to common clamping systems; compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The square form, 0° relief angle and 90° included angle give predictable contact conditions and cutting orientation, while the cylindrical hole enables positive and repeatable clamping. These features simplify tool changeover and reduce set-up time, supporting consistent tool overhang and minimising vibration for improved surface finishes. Practical performance for a variety of turning operations Designed for both external and internal turning, the insert performs best when the grade and chipbreaking strategy match the workpiece material and machining stability. As supplied, this variant is without chipbreaker, making it suitable where manual or custom chip control is preferred or where a smooth finish is required. The insert’s 0.4 mm corner radius helps control edge rounding and stress concentration, contributing to reliable part geometry in finishing passes. For system build-up, pair the insert with a matching outside holder or boring bar, a backing pad or clamping set and appropriate replacement screws to guarantee secure assembly and repeatable results. Contact Metav Werkzeuge for tailored application advice on the LX11 SNGA120404 insert and to confirm availability; reach out via info@metav-werkzeuge.com or +49 2822 7131930 for prompt assistance Technical data Article number: 6806454 Manufacturer SKU: TUN6806454 SKU: 6806454-Tungaloy Designation: SNGA120404 Model series: ISO indexable turning inserts Manufacturer: Tungaloy Core parameters Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° ISO code: 120404 Design and features Material: carbide Grade: LX11 (Tungaloy) Chipbreaker: without Hole: with cylindrical hole Shape: square Intended application: turning System build-up: compatible holder, backing pad, clamping set, replacement screws FAQ What machining operations is this insert intended for? The SNGA120404 LX11 Tungaloy indexable turning insert is intended for external and internal turning operations and is supplied without a chipbreaker for applications requiring custom chip control. How does the LX11 grade affect tool life? The LX11 grade provides a balance of wear resistance and toughness; in the SNGA120404 insert this supports longer edge stability and more predictable life under typical turning conditions. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation and the insert’s square shape and cylindrical hole aid straightforward matching. What does the 0.4 mm corner radius mean for finishes? A 0.4 mm corner radius reduces stress concentration at the cutting edge and helps produce controlled surface finishes, especially beneficial during light finishing passes. What is the article and manufacturer SKU for ordering or reference? The article number is 6806454 and the manufacturer SKU is TUN6806454 for the SNGA120404 LX11 insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise geometry, an uncoated cemented carbide cutting edge and ISO compatibility for consistent turning performance; order this insert directly via Metav Werkzeuge or ask the consultants for application guidance. SNGA 120404 TH10 indexable insert for Turning — Tungaloy The SNGA120404 TH10 is an ISO‑standard indexable insert engineered for external and internal turning, offering a sharp uncoated cutting edge suited to non‑ferrous materials and applications that demand low cutting forces and clean surfaces. *ISO‑standard SNGA insert, compatible with common holders *Uncoated cemented carbide for low cutting forces *0.4 mm corner radius for fine surface finishing *Square 12 mm plate, 4.76 mm thickness, with hole Efficient turning with low cutting forces and consistent results The SNGA120404 TH10 belongs to an ISO‑compliant series of indexable plates designed to simplify tool selection and reduce setup time. The uncoated cemented carbide grade promotes low cutting forces, which is advantageous when machining softer, ductile metals and delicate components; lower forces often translate into reduced spindle load and improved dimensional stability. The combination of a sharp edge geometry and this substrate supports clean surface generation without the need for aggressive cutting parameters, making the insert suitable for finishing passes where part integrity and repeatability are priorities. Geometry tuned for superior surface finish and controlled chip behaviour A corner radius 0.4 mm provides a balance between edge strength and finishing capacity: the relatively small radius reduces tool nose contact to help achieve finer surface textures, while still offering sufficient robustness for common turning operations. The absence of an integrated chipbreaker means the cutting edge produces longer chips under some conditions; however, this characteristic supports uninterrupted chip flow when paired with appropriate coolant and chip control strategies. For customers seeking improved visual and tactile surface quality, this geometry supports low‑vibration machining and predictable finishes. Design details that simplify integration and seating The plate is a square 12 mm format with 4.76 mm thickness, featuring a cylindrical hole for secure clamping in standard external holders or boring bars. The insert’s seating and fixation depend on matching form, relief angle, tolerance class and thickness to the chosen toolholder; this standardised approach eases stocking and reduces the number of unique holders required on the shop floor. The zero relief angle contributes to a neutral cutting geometry that can be advantageous for certain profiling tasks and helps maintain a stable cutting line when paired with the correct clamp and backing shim. Practical selection advice and workflow benefits Choosing the TH10 grade reflects a pragmatic compromise: an uncoated substrate that emphasises sharpness and surface quality over extreme wear resistance, making it particularly effective for non‑ferrous materials and operations where low cutting forces are essential. Integrating these inserts into a systematic toolset—insert, compatible holder, backing pad and replacement screws—allows predictable changeovers and repeatable clamping torque. The result is a measurable uplift in process stability and throughput, especially for shops that prioritise consistent finishing and straightforward tool management. For application advice, availability or to order the Tungaloy SNGA120404 TH10 insert for precise turning tasks, contact Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and fast delivery. Technical Data Article number: 6806457 SKU: 6806457-Tungaloy Manufacturer SKU: TUN6806457 Model series: ISO‑Drehwendeschneidplatten Dimensions & Geometry Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 90° Relief angle: 0° Features & Material Material: cemented carbide (uncoated) Grade: TH10 Shape: square Hole: with hole (cylindrical hole) Chipbreaker: none Typical application: Turning (external and internal) Series compatibility: ISO turning inserts; compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The SNGA120404 TH10 insert, in TH10 uncoated cemented carbide, is optimised for non‑ferrous materials and applications where a sharp, low‑force cutting edge produces clean surfaces. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius on the SNGA120404 TH10 supports finer surface finishes and reduced vibration during finishing passes while maintaining adequate edge strength for general turning tasks. Is a chipbreaker included with the insert? This turning insert is supplied without an integrated chipbreaker; chip control should be managed via cutting parameters, coolant strategy and suitable toolholder geometry. How to ensure compatibility with an existing toolholder? Compatibility depends on matching the insert’s ISO designation, plate size, thickness, relief angle and fastening style to the holder; the SNGA120404 TH10 uses a square format with a cylindrical hole for standard clamping. Can this insert be used for both external and internal turning? Yes, the SNGA120404 TH10 is intended for both external and internal turning operations when combined with the appropriate external holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGA 120408 BX360 Wendeplatten - Tungaloy
Take advantage of the combination of long tool life, high‑hardness performance and straightforward ISO compatibility for reliable finishing and high repeatability in hard turning operations; order the SNGA120408 BX360 Tungaloy indexable insert directly via Metav Werkzeuge or consult the advisers for application support. SNGA120408 BX360 indexable turning insert, 90° included angle — Tungaloy The SNGA120408 BX360 is an ISO‑standard square indexable insert for external and internal turning, engineered for wear‑intensive finishing of hardened steels and, depending on grade, suitable for certain cast iron applications. Square ISO insert SNGA120408, 12 mm size BX360 CBN grade for hardened steels 90° included angle for robust shoulder turning 0.8 mm corner radius for fine edge finishes Consistent edge life through CBN‑based grade BX360 The main advantage of the BX360 grading is its use of CBN (cubic boron nitride), which provides superior abrasion resistance compared with conventional carbide grades. As a result, the insert delivers longer tool life and predictable wear behaviour in high‑hardness finishing, reducing the need for frequent index changes. This makes the component particularly suitable for end‑of‑line turning where surface integrity and dimensional constancy are critical. The insert is produced to ISO dimensions, ensuring interchangeability across standard toolholder systems. Predictable machining without a chipbreaker for fine finishes This square plate is supplied without a chipbreaker, favouring uninterrupted shearing and low cutting forces in finishing passes. The absence of an integrated chipformer requires matching the grade and geometry to the machining conditions and workpiece material; chosen correctly, this yields superior surface quality and repeatable dimensional results. Compatibility with the clamping system is defined by the insert’s form, relief angle, tolerance class, attachment style and thickness, allowing process planners to integrate the plate into stable tool assemblies for precision turning. Simple integration into ISO tool systems for workshop flexibility The system concept comprises the ISO indexable plate, a suitable external holder or boring bar, a shim/clamping set and replacement screws. This modular approach enables rapid set‑up and predictable rigidity when the holder selection matches the 12 mm plate size and specified thickness. The square format and 90° included angle allow robust shoulder operations and easy orientation in standard pockets, so workshop inventories can be rationalised while preserving process flexibility. Application guidance for hardened steel turning and finishing Designed primarily for turning hardened steels, the insert’s 0.8 mm corner radius and square geometry support light to medium finishing cuts and fine surface generation. Where cast iron machining is required, the BX360 family offers specific variants; process engineers should verify the exact subgrade suited to the substrate. For optimal results, the insert should be used in stable toolholders, with appropriate depths of cut and feed to match finishing objectives. The use of coolant or minimum‑quantity lubrication depends on the machining strategy and workpiece metallurgy. For availability, technical data sheets and application advice on the Tungaloy SNGA120408 BX360 CBN insert, contact Metav Werkzeuge — info@metav-werkzeuge.com, tel +49 2822 7131930 — for tailored recommendations and fast delivery. Technical Data Manufacturer article number: 6806469 SKU: 6806469-Tungaloy Designation: SNGA120408 BX360 Tungaloy‑wendeplatte Facts Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Relief angle: 0° Design / Special features Material: Carbide substrate with CBN grade Grade: BX360 Plate shape: square With cylindrical hole for positive clamping Supplied without chipbreaker Intended application: turning (external and internal) ISO‑standard indexable insert series FAQ What materials is this insert intended for? The SNGA120408 BX360 insert is designed primarily for hardened steels; depending on the exact BX360 variant, certain cast iron applications are also possible. How does the BX360 CBN grade affect performance? The BX360 CBN grade provides high abrasion resistance and improved edge life in wear‑intensive finishing, making the insert suitable for consistent hard‑turning results. Is the insert compatible with standard ISO holders? Yes. The SNGA120408 conforms to ISO dimensions; holder compatibility depends on form, relief angle, tolerance class, attachment style, plate size and thickness. Can this plate be used for roughing operations? This insert is optimised for finishing and wear‑intensive end machining; roughing typically requires different chip control and geometry than the supplied configuration without a chipbreaker. What does the 90° included angle mean for machining? A 90° included angle offers strong shoulder support and versatility for facing and shoulder turning, enabling robust engagement and simple orientation in standard pockets. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGA 120408 DX140 Wendeplatten - Tungaloy
The SNGA120408 DX140 combines polycrystalline diamond cutting performance, a carbide substrate and ISO compatibility to deliver long tool life and very high cutting speeds for aluminium and other non‑ferrous materials; order the insert directly via Metav Werkzeuge or consult the technical team if further guidance is required. SNGA120408 DX140 ISO turning indexable insert by Tungaloy — PCD grade for aluminium The SNGA120408 DX140 is an ISO‑standard, square turning indexable insert designed for external and internal turning of aluminium and non‑ferrous materials, featuring a 90° geometry and a 0.8 mm corner radius. SNGA120408 DX140 PCD for aluminium and non‑ferrous metals ISO‑standard square insert, 90° with 0.8 mm radius Cylindrical hole for secure clamping Long tool life and high cutting speeds High-speed cutting and material suitability for efficient turning The polycrystalline diamond (PCD) cutting material of this indexable insert offers exceptionally low wear rates when machining softer but abrasive alloys such as aluminium and other non‑ferrous metals. The combination of a PCD cutting edge on a carbide body enables significantly higher cutting speeds and longer tool life than conventional carbide grades when used in the recommended materials. This means fewer tool changes, reduced downtime and a measurable improvement in process throughput for production environments that demand stable, repeatable finishing and semi‑finishing operations. Precision geometry and secure clamping for consistent results A square 90° plate form with a 0.8 mm corner radius provides a balance between edge strength and the ability to achieve fine radii on a workpiece. The insert is supplied with a cylindrical hole, ensuring secure and repeatable clamping in compatible ISO holders. Compatibility with a holder depends on the insert’s form, clearance angle, tolerance class, fixation method, size and thickness; these parameters must be matched to the toolholder system to guarantee positional accuracy and cutting stability. The insert’s ISO conformity simplifies holder selection in standard tool setups. Long‑term economy through reduced tool consumption The DX140 grade is formulated to deliver very long stand life in aluminium and abrasive non‑metallic workpieces, reducing overall tooling costs despite a higher unit price. The carbide substrate offers the necessary rigidity while the PCD cutting layer resists abrasive wear, which translates into fewer indexings and replacements across production runs. For manufacturers seeking predictable maintenance intervals and lower per‑part tooling cost, the grade’s resistance to abrasion and thermal stability are practical economic advantages. System considerations and recommended usage This insert is part of a system comprising an ISO insert, a matching external holder or boring bar, a support pad or clamp set and replacement fastening screws. The plate has a 4.76 mm thickness and a 12 mm size, with a 0° clearance angle specified; these dimensions influence the choice of holder and the achievable depths of cut. Note that the insert is supplied without a chipbreaker, so chip control must be addressed by cutting parameters and holder geometry or by selecting a compatible chipbreaker variant where available. For stable results, choose feed and speed settings appropriate for PCD on aluminium and ensure adequate workpiece clamping. For machining aluminium at high cutting speeds with reliable life, contact Metav Werkzeuge to order SNGA120408 DX140 and request application advice or compatibility checks via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6806467 Manufacturer SKU: TUN6806467 SKU: 6806467-Tungaloy Designation: SNGA120408 DX140 Series: ISO turning indexable inserts Material: Carbide substrate with PCD cutting material Facts Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 90° Clearance angle: 0° Hole: with cylindrical hole Special features Polycrystalline diamond (PCD) cutting material Carbide body for rigidity ISO‑standard indexable insert Square plate form for 90° turning No chipbreaker supplied Designed for external and internal turning of aluminium and non‑ferrous materials FAQ What materials is this insert suitable for? The SNGA120408 DX140 is designed primarily for aluminium and other non‑ferrous metals and abrasive non‑metallic materials, where the PCD grade delivers superior wear resistance. Does the insert require a special holder? Compatibility depends on the holder matching the insert’s form, clearance angle, tolerance class, fixation method, size and thickness; the SNGA120408 DX140 is ISO‑standard, simplifying selection of a matching ISO toolholder. How does the absence of a chipbreaker affect machining? As supplied without a chipbreaker, the insert relies on appropriate cutting parameters, toolholder geometry and coolant strategy for chip control; choosing compatible feeds and positive rake holders helps maintain consistent swarf evacuation. What are the key geometric benefits of the 0.8 mm radius and 90° form? The 0.8 mm corner radius and 90° square form provide a compromise between a robust cutting edge and the capacity to produce defined radii on external profiles, improving edge strength while maintaining finishing capability. Is the cutting material integrated on a carbide substrate? Yes, the DX140 grade uses a PCD cutting layer on a carbide substrate, combining the abrasive resistance of PCD with the structural support of a carbide body for durable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120408 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, the FX105 carbide grade and a compact square geometry for consistent turning results; the robust corner radius and 0° relief angle deliver reliable edge stability and repeatable profiles. Order this indexable insert directly via Metav Werkzeuge or consult our specialists for application guidance. SNGA 120408 FX105 Tungaloy indexable insert for turning — square 12 mm, 0° relief The SNGA120408 FX105 is an ISO-standard square indexable insert designed for external and internal turning, combining a Tungaloy carbide grade with a geometry tuned for stable cutting and long tool life. ISO turning insert SNGA120408 FX105 Carbide grade for enhanced wear resistance Square 12 mm, 0° relief angle 0.8 mm corner radius for precise profiling Predictable mounting and process reliability The ISO designation ensures straightforward selection and repeatable clamping: compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness, which reduces setup variability. As an ISO-format insert, this plate delivers a consistent interface with matched holders and adaptors, supporting repeatable machining and minimising the need for trial adjustments. This stability translates into fewer scrapped parts and more reliable cycle times in production. Balanced material grade for mixed turning tasks The FX105 grade is a Tungaloy carbide formulation that balances wear resistance and toughness, making the insert suitable for a wide range of turning operations. The substrate hardness and microstructure are selected to maintain a stable cutting edge under intermittent or continuous cuts, so the indexable plate resists abrasive wear while retaining edge stability. This balance helps extend insert life and supports consistent surface finishes in batch production. Geometry that supports accuracy and edge life A square 12 mm platform with a 0.8 mm corner radius and a 0° relief angle gives a combination of profile accuracy and robust cutting behaviour. The square shape and 90° included angle support versatile turning profiles and enable orientation options for even wear distribution. The cylindrical hole and 4.76 mm plate thickness ensure secure clamping in standard ISO holders, so the cutting edge remains stable during heavier engagement and when profile accuracy is required. Application scope and practical machining advice Intended primarily for turning operations, the insert is supplied without a chipbreaker; selecting a matching holder and an appropriate chip control geometry is therefore important for efficient swarf management. The Tungaloy grade performs well across common engineering materials when paired with correct cutting data and stable fixturing. For special alloys or thin-walled workpieces, combining the insert’s toughness with reduced depths of cut and optimised feeds will improve finish and tool life. For tailored recommendations on integrating this Tungaloy FX105 insert into a production cell, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — our advisers provide application-specific selection and clamping guidance Technical data Article number: 6806462 Manufacturer article number: 6806462 SKU: 6806462-Tungaloy Manufacturer SKU: TUN6806462 Model series: ISO turning indexable inserts Label: SNGA120408 FX105 Tungaloy indexable insert Core specifications Size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Hole: cylindrical Shape: square Features & applications Material: carbide Grade/coating: FX105 (Tungaloy) Application: turning Chipbreaker: none (without) ISO designation: SNGA120408 Compatibility: determined by form, relief angle, tolerance, fastening, size, thickness FAQ Which materials are suitable for this insert? The SNGA120408 FX105 insert is a carbide-based grade optimised for general turning tasks; the FX105 formulation offers a broad workpiece coverage when correct feeds and speeds are applied. Is the insert supplied with a chipbreaker? The SNGA120408 FX105 indexable insert is provided without a chipbreaker, so chip control depends on holder choice and the cutting geometry selected for the operation. What holder features are required for correct mounting? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; use an ISO-compatible square turning holder that matches SNGA120408 dimensions. How does the FX105 grade perform under interrupted cuts? The FX105 grade balances toughness and wear resistance, providing improved edge stability for intermittent cuts compared with more wear-focused grades. Can the insert be used for finishing and roughing? With a 0.8 mm corner radius and 0° relief, the SNGA120408 FX105 performs best in general turning and profile work; for heavy roughing consider larger radii or grades specifically tuned for high-metal-removal rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120408 LX10 Wendeplatten - Tungaloy
The combination of LX10 wear resistance, a 0.8 mm corner radius and ISO-standard geometry delivers stable, repeatable turning performance with predictable tool life. Order the SNGA120408 LX10 insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. SNGA120408 LX10 ISO indexable turning insert — 90° square, 0.8 mm radius, Tungaloy The SNGA120408 LX10 is an ISO-standard square indexable insert designed for precise external and internal turning where a balanced mix of wear resistance and edge stability is required. ISO square insert SNGA 120408, 90° geometry LX10 Tungaloy carbide grade for turning 0.8 mm corner radius for controlled cutting Cylindrical hole, 4.76 mm thickness for secure clamping Geometry optimised for stable turning and reproducible results The square 90° geometry of this indexable plate provides a stable cutting edge for a wide range of turning operations, especially where strong radial engagement is necessary. The 0.8 mm corner radius increases edge strength and reduces the risk of microchipping, while the square form permits multiple indexings for extended tool life. Compatibility with standard ISO holders is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness, making it straightforward to integrate the plate into existing turning systems. LX10 grade and carbide construction for consistent performance Manufactured in a carbide substrate and specified in the LX10 Tungaloy grade, the insert combines hardness and toughness to handle diverse workpiece materials with dependable wear resistance and edge stability. The grade selection complements the insert geometry by balancing abrasion resistance and fracture toughness, which is particularly beneficial when machining mixed batch materials or when process stability is a primary concern. The result is reduced tool change frequency and consistent surface quality across serial production. Secure clamping and system compatibility reduce set-up variability The insert features a cylindrical hole and a plate thickness of 4.76 mm, enabling secure clamping and correct seating in most ISO-compliant external holders and boring bars. Secure fixation minimises vibration and runout, contributing directly to improved surface finish and extended insert life. When specifying a tool system, ensure matching forholder form, clearance angle and tolerance class; complementary components include the appropriate shim, clamping set and replacement screws for a complete, robust system. Application guidance: choosing chip control and typical uses This indexable plate is intended for turning operations, both external and internal, where no dedicated chipbreaker is required. For materials that produce long or stringy chips, pairing the insert with an appropriate chip control geometry on the holder or selecting a dedicated chipbreaker version may be preferable. The LX10 grade suits many general turning tasks; for heavy interrupted cuts or highly abrasive materials, consider matching the grade to the workpiece characteristics to maintain process reliability and surface integrity. For productive, reliable turning with the LX10 Tungaloy grade, contact Metav Werkzeuge for supply and tailored machining advice via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6852101 Manufacturer article number: 6852101 Manufacturer SKU: TUN6852101 SKU: 6852101-Tungaloy Model series: ISO indexable turning inserts Core specifications Designation: SNGA120408 ISO code: 120408 Grade: LX10 (Tungaloy) Material: Carbide Shape: Square, 90° included angle Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Hole: Cylindrical, with hole Features & applications Application: Turning (external and internal) Chipbreaker: none Compatibility: ISO holder form, clamping & tolerance dependent Coating: not specified System components: compatible holder, shim, clamping set, replacement screws FAQ What materials is this insert suitable for? The SNGA120408 LX10 insert, in the LX10 grade and carbide substrate, is designed for a broad range of turning tasks; material-specific performance depends on the workpiece and cutting data. How does the 0.8 mm corner radius affect cutting? A 0.8 mm corner radius increases edge robustness and helps to reduce chipping under moderate cutting forces, improving stability and surface finish when using the SNGA120408 LX10 plate. Is the insert compatible with standard ISO holders? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the SNGA120408 is an ISO-standard format intended for use with matching ISO holders and clamping systems. Does this product include a chipbreaker? This variant is supplied without a chipbreaker; chip control should be achieved via holder geometry or by selecting an insert version with an integrated breaker where required. What components are recommended for a complete system? A typical system includes the ISO insert, a compatible external holder or boring bar, an underlay or shim, a clamping set and replacement screws for secure fastening of the SNGA120408 LX10. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120408 LX11 Wendeplatten - Tungaloy
Take advantage of a proven combination of carbide durability, the LX11 cutting grade and ISO compatibility for consistent turning performance; order directly via Metav Werkzeuge or consult the technical team for selection support. SNGA120408 LX11 SNGA turning insert (square, 12 mm) – Tungaloy SNGA120408 LX11 is an ISO-standard square indexable insert engineered for general turning operations, providing a 0° relief geometry, a 0.8 mm corner radius and compatibility with ISO toolholders. ISO-standard square insert SNGA120408 Tungaloy carbide grade LX11 0.8 mm corner radius for robust cutting 0° relief angle suitable for external turning High-performance cutting for reliable productivity The indexable insert is manufactured from carbide and matched with the LX11 grade to deliver an optimised balance of wear resistance and edge stability. This combination reduces flank wear and maintains cutting performance across longer tool life, supporting higher throughput and predictable tool change intervals. The square geometry and 0.8 mm corner radius contribute to stronger cutting edges that tolerate interrupted cuts and increased radial engagement, translating into improved cycle-time stability on both roughing and finishing passes. Designed for straightforward integration and secure clamping Compatibility with toolholders is determined by form, relief angle, tolerance class, attachment type, size and thickness; this insert is ISO-standard, which simplifies selection for existing turning holders. The 0° relief angle offers a neutral cutting geometry that enhances cutting-edge support and reduces tendency to chatter when paired with a rigid holder and correct clamping. The cylindrical hole and standard mounting fit allow secure fastening and repeatable positioning, aiding setup speed and process consistency in production environments. Clear guidance on dimensions, handling and benefits The insert’s square form and 12 mm size, combined with a 4.76 mm thickness, make it suitable for a wide range of external and internal turning tasks where a robust edge and repeatable indexability are required. Absence of a chipbreaker in this variant focuses the selection on geometrical stability and edge life; for materials that demand active chip control, a matched chipbreaking geometry can be chosen instead. The neutral geometry and the LX11 composition result in a versatile solution that performs across common engineering materials while prioritising predictable wear behaviour and tool-life economy. Contact Metav Werkzeuge today for tailored selection advice on the Tungaloy LX11 turning inserts (SNGA120408) and ensure the right grade and geometry for the application; Metav Werkzeuge can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6806463 Manufacturer SKU: TUN6806463 Metav SKU: 6806463-Tungaloy Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Special features Square form Cylindrical hole Grade: LX11 Material: carbide ISO designation: SNGA120408 Application: turning Chipbreaker: none FAQ What materials is this insert suitable for? The SNGA120408 LX11 insert is designed for general turning and, as a carbide grade LX11 product from Tungaloy, covers a broad range of engineering materials depending on cutting data and machine rigidity. How does the 0° relief angle affect cutting behaviour? A 0° relief angle on the SNGA120408 LX11 gives a neutral cutting geometry that increases edge support and reduces vibration risk when used with a rigid clamping system and appropriate holder. What does the LX11 grade provide compared with other grades? The LX11 grade is formulated by Tungaloy to balance wear resistance, toughness and edge stability, optimising tool life and consistency for turning operations with variable engagement and duty cycles. Which dimensions are most relevant for selecting a compatible holder? The key dimensions for holder compatibility are the ISO designation SNGA120408, the 12 mm insert size, 4.76 mm thickness and cylindrical hole; match these to the holder’s form, tolerance class and clamping method Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120408 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of high surface-quality performance, consistent wear resistance and simple mounting for reliable finishing operations; order the SNGA120408 NS520 insert directly via Metav Werkzeuge or consult the team for application advice. SNGA 120408 NS520 Tungaloy indexable insert — ISO 120408, square finishing insert SNGA 120408 is an ISO‑standard indexable turning insert designed for finishing and light turning of steel components. ISO indexable turning insert SNGA120408 NS520 cermet grade for superior finish Square 12 mm size with 0.8 mm nose radius Cylindrical hole, 0° relief angle for secure clamping Optimised surface finish and dimensional consistency The insert is engineered for precision turning, delivering improved surface quality and tight dimensional control in finishing passes. The NS520 cermet grade, available as coated or uncoated cermet, emphasises a fine, stable cutting edge that promotes uniform wear and repeatable part quality. The modest 0.8 mm nose radius and the square form are selected to balance edge strength with the ability to achieve the required surface roughness, making the geometry suitable for components where appearance and tolerances matter. Confident clamping and broad ISO compatibility Compatibility with toolholders is determined by insert form, clearance angle, tolerance class, fixing method, size and thickness. The ISO designation ensures interchangeability in ISO‑compliant holders and boring bars; the square 12 mm dimension and 4.76 mm thickness match common external and internal turning systems. The insert’s cylindrical pilot hole supports positive clamping and stable seating, reducing vibration and improving process stability during light to finishing cuts. Durable cutting edge for productive finishing cycles Constructed from cemented carbide substrate with the NS520 cermet specification, the insert offers high resistance to abrasive wear while supporting excellent surface integrity. The grade focuses on consistent flank wear rather than maximum metal removal, so productive finishing cycles are achieved with predictable tool life. Absence of a specialised chipbreaker means chip control should be matched to the workpiece material and cutting conditions; selecting appropriate parameters maintains chip flow and extends cutting performance. Contact Metav Werkzeuge for availability of Tungaloy SNGA 120408 inserts and tailored recommendations by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6806465 Manufacturer SKU: TUN6806465 SKU: 6806465-Tungaloy ISO designation: SNGA120408 Model series: ISO indexable turning inserts Numbers / Core technical data Size: 12 mm Thickness: 4.76 mm Nose radius: 0.8 mm Relief angle: 0° Angle: 90° Designs / Special features Material: cemented carbide (cermet or coated cermet) Grade: NS520, for finishing to light machining of steel Shape: square insert Hole: with cylindrical hole Chipbreaker: none Application: turning FAQ Is this insert suitable for finishing steel components? The SNGA120408 NS520 Tungaloy insert is specified for finishing to light machining of steel and is particularly focused on delivering high surface quality and consistent wear. Which toolholders will accept this insert? Compatibility is determined by the insert form and ISO designation; holders and boring bars designed for ISO SNGA120408 format with corresponding clearance and clamping geometry will accept the insert. What does the NS520 grade mean in practice? NS520 is a cermet grade optimised for superior surface finish and dimensional stability; it promotes uniform wear and is intended for finishing and light turning applications. Can the insert be used for roughing operations? This grade and geometry are tailored to finishing; for heavy roughing, a different grade and insert geometry with robust chipbreaking would be more appropriate. How do nose radius and relief angle affect machining results? A 0.8 mm nose radius balances edge strength and surface finish, while the 0° relief angle influences the effective cutting geometry and must be matched with the holder and cutting parameters for stable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated carbide grade and precise ISO geometry to achieve low cutting forces and clean surfaces in turning operations; the square form with a cylindrical hole ensures secure clamping and predictable tool life. Order directly via Metav Werkzeuge or consult the team for application-specific advice. SNGA 120408 TH10 — Turning indexable insert (SNGA) by Tungaloy The SNGA120408 TH10 is an ISO‑standard square indexable insert for turning, designed for external and internal operations where an uncoated, sharp edge supports low cutting forces and improved surface finish. ISO standard square insert Uncoated carbide TH10 grade 0° clearance angle for stable cutting 0.8 mm corner radius for fine finish Optimised cutting performance for stable, efficient turning The insert combines a TH10 uncoated carbide grade with a sharp geometry that reduces cutting resistance, which in practice leads to low cutting forces and a clean surface on non‑ferrous components. The absence of a coating helps to keep the cutting edge sharp and lowers friction in light‑cutting applications, making the product particularly suitable when machining materials that benefit from a keen edge. This rational design reduces the need for aggressive machine settings while maintaining process reliability and machining economy. Geometry engineered for consistent surface quality and secure clamping A 0° relief and a 0.8 mm corner radius give predictable cutting behaviour and a fine surface finish on turned parts. The insert’s square form and cylindrical hole enable secure fastening in compatible holders, so repeatable positioning and stiffness are achieved across multiple re‑indexings. The nominal plate thickness (4.76 mm) and plate size (12 mm) contribute to rigidity in the cutting zone, which is advantageous where dimensional consistency and surface integrity are required. Seamless integration into ISO turning systems for easy replacement Classified within the ISO standard series, the insert fits established turning systems when matched to the correct holder or boring bar. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; in practice this means the insert slips into a modular system comprising an insert, a matching external holder or boring bar, a shim/clamping set and replacement screws, allowing straightforward interchangeability and predictable stocking of spare parts. Material suitability and application guidance for effective use This sharp universal grade is optimised for non‑ferrous materials and for situations where an uncoated cutting edge delivers the best compromise between low force and surface quality. Typical applications include external and internal turning; the choice of chipbreaker (if required), grade and machining parameters should be matched to the workpiece material and machine stability. The insert is supplied without a chipbreaker, so selection of an appropriate chip control strategy is recommended for continuous turning operations. For technical matching or to place a procurement enquiry for the Tungaloy SNGA120408 TH10 insert, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6806466 Manufacturer SKU: TUN6806466 SKU: 6806466-Tungaloy Material: Carbide Model series: ISO‑Drehwendeschneidplatten Application: Turning Facts Insert designation: SNGA120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Shape: Square Manufacturer article number: 6806466 Special features Grade: TH10 (uncoated carbide) Hole: with cylindrical hole Chipbreaker: none Compatibility: ISO‑standard insert — match holder by form, relief, tolerance, fastening, size and thickness Typical system components: insert, external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The SNGA120408 TH10 insert is designed as a sharp universal grade for machining non‑ferrous materials and applications that benefit from an uncoated cutting edge to reduce cutting forces and improve surface finish. How does the TH10 grade influence performance? TH10 is an uncoated carbide grade that prioritises a keen edge and low cutting resistance; the SNGA120408 TH10 therefore delivers efficient cutting and clean surfaces in light to moderate turning operations. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning when mounted in an appropriate ISO‑compatible holder or boring bar and when tool overhang and stability are controlled. What should be considered when selecting a holder for this insert? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; matching the SNGA120408 geometry to a correctly specified holder ensures secure clamping and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120412 BX360 Wendeplatten - Tungaloy
Combine the high‑hardness BX360 CBN grade with ISO compatibility and a robust 90° square geometry to achieve consistent finishing on hardened steels; order directly via Metav Werkzeuge or consult their specialists for application-specific advice. SNGA 120412 BX360 ISO turning insert for turning — Tungaloy The SNGA 120412 BX360 is an ISO‑standard square turning insert designed for external and internal turning operations, optimised for finishing of hardened steels and, depending on variant, cast iron. *ISO‑standard square insert *CBN grade BX360 for hardened steels *90° geometry, 1.2 mm corner radius *Cylindrical hole for secure clamping Consistent finishing on hardened components thanks to CBN technology The BX360 designation identifies a CBN cutting material engineered for wear‑intensive finishing of high‑hardness workpieces. Cubic boron nitride provides superior abrasion resistance compared with conventional carbide grades, which translates into longer uninterrupted cut times and fewer insert changes. For precision finishing applications where surface integrity and dimensional stability are critical, the CBN composition delivers consistent edge retention and reduced regrinding frequency, improving overall process efficiency. Stable clamping and geometry that support accurate shoulder turning ISO‑standardisation of the insert ensures repeatable fitment with compatible holders; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The square plate with a 90° corner and a 1.2 mm corner radius provides a compromise between strength and profile fidelity, suitable for defined shoulder faces and light profiling. The insert’s cylindrical hole allows secure axial clamping and precise location, while the 4.76 mm plate thickness contributes to rigidity under interrupted cuts, reducing chatter and improving surface finish. Selection guidance for chip control and material pairing This insert is supplied without an integrated chipbreaker, so the choice of chip control geometry and corresponding holder should match the workpiece material and machining strategy. The BX360 CBN grade is intended primarily for hardened steels and, depending on the specific variant, for some cast iron grades; softer non‑ferrous materials are generally not suitable for CBN cutting edges. Select holders and feed rates that favour continuous, low‑impact engagement to exploit the CBN edge‑retention benefits and to avoid thermal shock to the cutting zone. Improved process security and predictable tool life for finishing cycles Built on a cemented carbide substrate with a CBN cutting surface, this insert combines the mechanical support of the body material with the thermal and abrasive resistance of the CBN layer. The result is a predictable wear pattern and reduced risk of catastrophic flank failure in demanding finishing operations. For production lines focused on repeatability and low rework rates, the insert supports stable machining windows and contributes to lower overall tooling cost per component when matched to the correct holder and cutting parameters. For application advice specific to Tungaloy SNGA 120412 BX360 and to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a technical consultation Technical Data Article number: 6806475 Manufacturer SKU: TUN6806475 Model series: ISO‑Drehwendeschneidplatten Facts Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Geometry angle: 90° Special features Cutting material: CBN (cubic boron nitride), grade BX360 Substrate material: Hartmetall (cemented carbide) Plate form: square Hole: with hole — cylindrical hole Supplied without chipbreaker Application: turning; external and internal; finishing of hardened steels (depending on variant also cast iron) FAQ Which materials is this insert designed to cut? The SNGA 120412 BX360 insert from Tungaloy is designed primarily for the finishing of hardened steels and, depending on the specific execution, can also be suitable for cast iron. Can the SNGA 120412 BX360 be used in standard ISO holders? Yes; the ISO‑standard form guarantees compatibility with holders that match the insert’s form, size, thickness, clearance angle and fastening method. Why choose a CBN grade like BX360 over conventional carbide for finishing? CBN offers superior abrasion resistance and edge retention on hardened workpieces, which leads to longer continuous cutting periods and improved surface integrity compared with standard carbide inserts. Is a chipbreaker included with this insert? No; the SNGA 120412 BX360 is supplied without a chipbreaker, so chip control must be achieved via holder geometry or by selecting a matching chipbreaker insert where appropriate. What clamping features ensure secure retention in the toolholder? The insert has a cylindrical hole for axial clamping, combined with a square form and 4.76 mm thickness to ensure stable seating and reduced vibration during finishing passes. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGA 120412 FX105 Wendeplatten - Tungaloy
The SNGA120412 FX105 insert combines Tungaloy's wear-resistant grade with a precise 1.2 mm corner radius and a 90° configuration for stable turning results — order directly via Metav Werkzeuge or contact our consultants for holder compatibility. SNGA 120412 FX105 Tungaloy turning insert – ISO square, 90° SNGA 120412 FX105 Tungaloy turning insert is an ISO‑standard square carbide insert intended for general turning applications; compatible holders and clamping systems must match the form, clearance and tolerance class. ISO‑standard square insert Tungaloy FX105 carbide grade Corner radius 1.2 mm for edge stability Cylindrical hole, 4.76 mm thickness High‑performance grade for consistent cutting The FX105 grade by Tungaloy is formulated to balance wear resistance and edge toughness, delivering repeatable performance in turning operations. As a cemented carbide insert, it sustains cutting temperatures and maintains a predictable flank wear rate, which supports stable process windows and reduced downtime. This technical balance makes the insert suitable for a range of turning tasks where consistent tool life and controlled wear are priorities. ISO compatibility that simplifies tool selection Designed as an ISO‑standard square insert with a 90° main cutting angle and a 1.2 mm corner radius, the geometry provides reliable engagement for external and internal turning. The insert features a cylindrical hole for secure mounting and a plate thickness of 4.76 mm, so selection of a matching holder depends on form, clearance angle, tolerance class, fastening method, size and thickness. Clear specifications reduce trial fitting and accelerate integration into existing tool systems. System considerations and machining guidance This insert is supplied as a single cutting plate intended to form part of a complete tool system comprising insert, matching external holder or boring bar, and the necessary shims or clamping sets. The placard indicates no chipbreaker fitted, so the cutting strategy should consider chip formation and evacuation accordingly; choosing the appropriate chip control geometry and cutting parameters will deliver best results. The design supports both finishing and medium‑duty turning tasks when paired with the correct holder and cutting data. For technical advice on fitting the SNGA 120412 FX105 insert or to confirm compatibility with specific holders, contact Metav Werkzeuge — our team will help match holder geometry and provide ordering support. Technical data Article number: 6806471 Manufacturer SKU: TUN6806471 SKU: 6806471-Tungaloy Manufacturer article number: 6806471 Material: Cemented carbide Key dimensions ISO designation: 120412 Size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Main angle: 90° Clearance angle: 0° Design & features Square plate form Cylindrical hole style Model series: ISO turning inserts Grade: FX105 (Tungaloy) Chipbreaker: none Typical application: turning System components: insert, matching external holder or boring bar, shim/clamping set, spare screws Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The SNGA 120412 FX105 insert is specified for turning and the FX105 Tungaloy grade is designed to offer a balance of wear resistance and toughness for a broad range of materials; select the appropriate chip control and cutting data for the workpiece material. Does the insert include a chipbreaker? No, the SNGA 120412 FX105 insert is supplied without a chipbreaker, so chip control must be managed by cutting parameters and the holder/chip evacuation setup. Which holders are compatible with this insert? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; matching holders and boring bars that accept ISO‑standard SNGA 120412 geometry are suitable. What is the corner radius and how does it affect machining? The corner radius is 1.2 mm; a larger radius increases edge strength and improves stability during heavier cuts but can influence the achievable surface finish and contact length. Is the insert sold as part of a system or individually? The item is a single ISO turning insert intended to be combined with a matching holder, shim/clamping set and fastening hardware to form a complete tool system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120412 LX10 Wendeplatten - Tungaloy
High wear resistance and stable cutting-edge performance from the LX10 grade ensure productive turning and consistent surface quality. The ISO-compatible square geometry with a 1.2 mm corner radius and a 90° form gives reliable dimensional control and straightforward insert replacement. Order directly via Metav Werkzeuge or ask their consultants for application-specific recommendations. SNGA120412 LX10 — Indexable turning insert, square 90° (r 1.2) by Tungaloy A SNGA120412 LX10 indexable insert designed for ISO‑standard external and internal turning, offering a balance of wear resistance and edge stability for productive machining. ISO 120412 format for broad compatibility LX10 grade with enhanced wear resistance Square 90° insert with 1.2 mm corner radius Cemented carbide, 4.76 mm thickness Stable cutting performance from a balanced grade and geometry The LX10 grade is engineered to combine wear resistance with sufficient toughness, so the cutting edge maintains form under continuous turning loads. The carbide substrate provides thermal stability and wear protection, which translates directly into longer periods between index changes and fewer unplanned interruptions. As the insert is ISO‑configured, cutters and holders are standardised; this reduces setup time and supports predictable throughput in repetitive production runs. Confidence in feed‑and‑speed decisions is increased because the material and coating synergy is selected to support consistent tool life. Faster changeovers and assured ISO compatibility Compatibility to the toolholder is determined by shape, relief angle, tolerance class, fastening, size and thickness. The SNGA designation follows the ISO 120412 geometry, so replacement inserts can be specified and fitted without guessing. The indexable insert format and a centred cylindrical hole ensure positive clamping when used with the corresponding external holder or boring bar, which simplifies tool management and reduces machine downtime. Clear, standard dimensions mean spares can be stocked centrally for rapid access, improving overall process efficiency. Robust edge and dimensional control for better surface finish A corner radius of 1.2 mm combined with a square 90° profile gives a sturdy cutting edge that resists chipping in interrupted cuts and heavy cross‑section removals. The plate thickness of 4.76 mm increases rigidity in the clamped assembly, reducing vibration and supporting repeatable part geometry. These attributes help to maintain consistent surface quality and dimensional tolerance, translating to fewer reworks and higher first‑pass yield. Where stability and predictable form are critical, the geometry supports conservative to aggressive cutting strategies without compromising edge life. Practical system assembly and selection guidance An ISO indexable plate works as part of a system: the insert, a matching external holder or boring bar, a backing pad/clamp set and the correct fastening screws. The insert is supplied with a cylindrical hole and no integrated chipbreaker, so choice of holder and machining parameters should reflect the workpiece material and the required chip control. For unfamiliar applications or critical materials, technical consultation is recommended to select the most appropriate chipformer, feed rates and cooling strategy. Metav Werkzeuge can assist with holder matching and process optimisation to make the most of the Tungaloy grade. For tailored advice and to order the SNGA120412 LX10 insert from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert support and supply coordination Technical data Article number: 6852102 Manufacturer SKU: TUN6852102 SKU: 6852102-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert size: 12 mm Corner radius: 1.2 mm Relief angle: 0° Thickness: 4.76 mm Angle: 90° Special features Shape: square Hole style: cylindrical hole Grade: LX10 Material: cemented carbide Application: turning Chipbreaker: none FAQ Is this insert suitable for both external and internal turning? The SNGA120412 LX10 indexable insert is intended for ISO‑compatible external and internal turning; compatibility with a holder is determined by shape, relief angle, tolerance and fastening. Which materials is the LX10 grade best suited to? The LX10 grade from Tungaloy offers a balance of wear resistance and toughness for broad turning applications; for material‑specific recommendations, Metav Werkzeuge can advise on feeds, speeds and chip control. How is the insert clamped in the toolholder? The insert features a cylindrical hole and is secured in a matching external holder or boring bar with a backing pad/clamp set and screws, ensuring stable clamping and repeatable positioning. What are the critical geometry values to consider for process planning? Key values are the 90° square geometry, a 1.2 mm corner radius and a thickness of 4.76 mm; these influence cutting edge strength, surface finish and recommended machining parameters. Does the insert include a chipbreaker? This insert is supplied without a chipbreaker; chip control must be managed via holder choice, cutting parameters or the use of an alternative insert geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120412 LX11 Wendeplatten - Tungaloy
Benefit from the combination of LX11 grade wear resistance and a 1.2 mm corner radius for stable cutting-edge performance; the insert’s ISO conformity and square 12 format ensure straightforward integration into standard turning toolholders. Order via Metav Werkzeuge or consult the team for application-specific guidance. SNGA120412 LX11 – Indexable turning insert, square 12, for turning by Tungaloy The SNGA120412 LX11 is an ISO-format indexable turning insert intended for general external and internal turning operations, combining a balanced carbide grade with a robust 90° geometry for predictable machining results. LX11 grade for increased wear resistance Square 12 size with 90° cutting geometry 1.2 mm corner radius for stable cutting edge Carbide construction for robust tool life Consistent productivity through balanced grade and edge stability The combination of the LX11 cutting grade and a carbide substrate delivers a practical balance of wear resistance and toughness that supports steady machining cycles. This balance reduces unscheduled index changes and contributes to predictable tool life, which in turn helps maintain process stability on series turning operations. The insert’s design focuses on economic performance: longer abrasion intervals and a stable cutting edge reduce downtime and allow production planning with fewer interruptions. The Tungaloy grade integrates modern substrate technology to maintain edge integrity under mixed cutting conditions. Secure mounting and ISO compatibility for straightforward retrofitting As an ISO-standardised indexable insert, the geometry, rake angle (0°), tolerance class, fixings, size and thickness govern compatibility with the matching holder. The square 12 format and the cylindrical hole permit positive location and clamping with standard screw or clamp systems; the 4.76 mm plate thickness supports robust seating and repeatable positioning. These characteristics make the insert easy to replace in existing tool assemblies and minimise the need for adapter tooling, leading to faster tool changes and maintained concentricity in external and internal turning setups. Geometry engineered for surface quality and edge security The 90° included angle and 1.2 mm corner radius are tuned to provide a secure cutting edge and predictable cutting forces, which helps to achieve consistent surface finish on turned components. The insert is supplied without a chipbreaker, making it suitable where straight-chip evacuation or specific chip shaping strategies are required; pairing the insert with an appropriate chip control geometry and cutting data will optimise chip behaviour and reduce secondary operations. The square shape also allows multiple index positions per insert, improving cost-efficiency across larger batch runs. Application guidance and quick integration into production Designed for turning, the insert performs well in general external and internal turning when matched with the correct holder and cutting parameters. The carbide body tolerates a range of stable cutting conditions; however, selecting cutting speeds, feeds and coolant strategies that match the workpiece material and surface finish target is essential for best results. For applications where chip control or specialised surface integrity is required, consider selecting a complementary chipbreaker style or alternative grade. If technical data or parameter support is required, Metav Werkzeuge provides consultancy to align the insert choice with the machining task. Contact Metav Werkzeuge for tailored recommendations on holder compatibility and cutting data, quoting SNGA120412 or SKU 6806472-Tungaloy for rapid assistance Technical Data Article number: 6806472 SKU: 6806472-Tungaloy Manufacturer SKU: TUN6806472 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: LX11 ISO designation: 120412 Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 90° Rake angle: 0° Hole: with cylindrical hole Special features Square plate format No chipbreaker ISO-standard indexable turning insert Tungaloy cutting grade LX11 Suitable for external and internal turning Robust carbide substrate FAQ What applications suit this insert best? The insert is intended for general external and internal turning; SNGA120412 LX11 performs reliably in standard turning operations when paired with the correct holder and cutting data. How does the LX11 grade affect performance? The LX11 grade provides a balance of wear resistance and toughness, meaning the insert maintains edge stability under mixed cutting conditions and supports predictable tool life. Is the insert compatible with existing ISO toolholders? Yes. The insert follows ISO geometry conventions; compatibility depends on holder form, rake angle (0°), tolerance class, clamping method, size and thickness. How many index positions does the square format provide? The square plate offers multiple index positions, enabling economical use of the cutting edges before replacement is required. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker; chip control should therefore be managed through holder geometry and cutting parameters or by selecting an alternative insert with an integrated chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGA 120412 LX21 Wendeplatten - Tungaloy
Benefit from the combination of a robust Tungaloy LX21 carbide grade, a 90° square geometry and a 1.2 mm corner radius for stable, repeatable turning results; order the insert via Metav Werkzeuge or consult our specialists for application support. SNGA 120412 LX21 Tungaloy turning insert — ISO-standard square insert, 90° geometry SNGA 120412 LX21 is an ISO-standard square indexable insert designed for external and internal turning, offering a 0° clearance angle and a 1.2 mm corner radius for demanding machining tasks. ISO-standard square turning insert Tungaloy LX21 carbide grade 90° geometry for robust external turning 1.2 mm corner radius for increased edge strength Consistent integration and predictable performance The ISO-standard form of this indexable insert guarantees compatibility with a wide range of holders when the holder’s form, clearance angle, tolerance class, fastening method, size and thickness match the insert. The SNGA120412 designation specifies the ISO outline and makes tool selection straightforward in CNC tool libraries. With a 0° clearance angle and a square shape, the insert provides a stable reference in the toolholder, reducing chatter and enabling consistent cutting conditions across batch runs. This results in predictable process parameters and easier machining planning. Material combination for long life and edge stability Manufactured in carbide and graded LX21, this turning insert balances wear resistance, toughness and edge stability. The grade is adapted to conventional turning operations where a blend of abrasion and impact resistance is required; it complements the insert geometry to extend tool life without sacrificing surface finish. The 1.2 mm corner radius increases cutting edge strength, making the insert suitable for interrupted cuts or heavier depths of cut while maintaining dimensional accuracy and reducing edge chipping. Practical mounting and system compatibility The insert is supplied with a cylindrical hole for secure clamping and a plate thickness of 4.76 mm, ensuring a rigid fit in compatible ISO toolholders. System setup typically comprises the ISO insert, a matching external holder or boring bar, a support pad or clamping set and replacement fixing screws. This modular approach simplifies stocking and maintenance: replacement inserts can be fitted quickly during planned tool changes, limiting downtime and stabilising production flow. Suitable applications and selection guidance Primarily intended for turning operations, this square insert performs well in both external and internal turning tasks where robustness and repeatable results matter. Because this insert is supplied without a chipbreaker, selection of a suitable chip control geometry should be made according to the workpiece material, machining strategy and machine rigidity. When machining alloyed steels, aluminium alloys or cast components, pairing the insert geometry with the LX21 grade delivers an efficient compromise between productivity and component surface quality. For tailored application advice or to secure original Tungaloy inserts for production, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team will recommend the ideal holder and process parameters. Technical Data Article number: 6806473 Manufacturer SKU: TUN6806473 SKU: 6806473-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: SNGA120412 LX21 Tungaloy-Wendeplatte Core specifications ISO designation: 120412 Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Angle: 90° Hole: with hole (cylindrical hole) Design and special features Material: carbide Grade: LX21 (Tungaloy) Shape: square Chipbreaker: none Intended application: turning Mounting: cylindrical-hole clamping Compatibility: ISO-standard insert FAQ What materials is this insert suitable for? The SNGA120412 LX21 Tungaloy turning insert in LX21 carbide is formulated to cover a broad material range; selection of cutting data and, where necessary, a chip-control geometry should be matched to the specific workpiece material. Is the SNGA120412 compatible with standard ISO toolholders? Yes, the SNGA120412 follows ISO dimensions and is compatible with ISO holders when the holder’s form, clearance angle, tolerance class, fastening and thickness correspond to the insert specifications. Does the insert include a chipbreaker? This SNGA insert is supplied without a chipbreaker; chip control must be achieved via matching holder geometry or selecting an alternative insert grade/geometry for specific materials. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and helps resist chipping during interrupted cuts or heavier engagement, supporting stable dimensions and longer life in demanding turning operations. Which replacement parts are recommended for the system? A complete turning system for this insert typically comprises the ISO indexable insert, a matching external holder or boring bar, a support pad or clamping set and replacement fixing screws; Metav Werkzeuge can advise on compatible components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com