SNGG 090308 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO-standard geometry and the TH10 uncoated carbide for dependable turning of non-ferrous materials; the 90° square form with a 0.8 mm corner radius supports fine surface finishes and low cutting forces. Order the insert directly via Metav Werkzeuge or contact our consultants for grade and holder compatibility. SNGG 090308 TH10 SNGG indexable turning insert (turning) – Tungaloy The SNGG 090308 TH10 is an ISO-standard indexable turning insert designed for external and internal turning, offering a sharp universal grade for non-ferrous materials and applications that need low cutting forces and clean surfaces. ISO 090308 square insert, 90° cutting geometry Uncoated carbide TH10 for low cutting forces 0.8 mm corner radius for fine surface finish Cylindrical-hole fixing for secure clamping Increase machining efficiency with proven ISO geometry The ISO-compliant square geometry delivers predictable chip formation and stable cutting engagement. With a defined 90° angle and standardised dimensions, the insert integrates smoothly into existing tool systems, reducing setup variability. The standardised form ensures compatibility with holders according to shape, relief angle, tolerance class, fixing method, size and thickness, so production runs stay consistent and set-up times are minimised. Emphasis on the ISO design offers a clear performance baseline for process planning and tool inventory control. Achieve low cutting forces and improved surface quality The TH10 grade is an uncoated cemented carbide formulated as a sharp universal grade for non-ferrous workpieces and operations requiring a clean cut. The combination of the sharp cutting edge and a 0.8 mm corner radius helps to reduce cutting forces and avoid material smearing, which translates into better surface finish on aluminium, copper alloys and similar materials. Selecting the appropriate chipbreaker and grade for the workpiece and stability of the set-up further improves chip control and part quality during both external and internal turning. Secure clamping and straightforward integration for less downtime The square insert with a cylindrical hole and a plate thickness of 3.18 mm offers a robust interface with standard clamping systems. The 0° relief angle and standardised thickness make it simple to match the insert to compatible external holders or boring bars, while the chipbreaker style 01 supports predictable swarf behaviour. This straightforward mechanical interface reduces the need for custom adapters and helps to keep tooling exchanges fast and repeatable, supporting continuous productivity in batch and single-piece flow environments. For application guidance or to secure SNGG 090308 TH10 inserts from Tungaloy, contact Metav Werkzeuge for grade selection and holder compatibility — info@metav-werkzeuge.com or +49 2822 7131930; order options and technical advice are available through Metav Werkzeuge. Technical data Article number: 6806506 SKU: 6806506-Tungaloy Manufacturer SKU: TUN6806506 ISO designation: 090308 Numbers / Core technical data Corner radius: 0.8 mm Plate thickness: 3.18 mm Insert size: 09 Relief angle: 0° Cutting angle: 90° Designs / Special features Shape: square Hole: with hole Hole style: cylindrical hole Grade: TH10 Coating: uncoated Material: cemented carbide Chipbreaker: 01 Model series: ISO indexable turning inserts Intended use: external and internal turning FAQ What materials is this insert suitable for? The SNGG 090308 TH10 insert uses the TH10 uncoated carbide grade and is intended primarily for non-ferrous materials such as aluminium and copper alloys, where a sharp edge and low cutting forces produce clean surfaces. How does the insert fix in the holder? The insert features a cylindrical-hole fixing, which provides secure clamping in compatible external holders and boring bars; the square form and thickness match ISO-standard fixtures. Can this insert be used for internal turning? Yes, the ISO-standard geometry and universal TH10 grade make the insert suitable for both external and internal turning tasks when the correct holder and chipbreaker are selected. What is the advantage of the 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength and surface finish: it reduces the risk of chipping while helping to produce a finer surface than larger radii. Which chipbreaker is fitted and why does it matter? This variant carries chipbreaker 01, designed to suit the TH10 grade and typical turning conditions for non-ferrous materials; choosing the right chipbreaker assists in predictable chip control and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 090308 X407 Wendeplatten - Tungaloy
The combination of ISO‑standard geometry, a Tungaloy X407 carbide grade and a 0.8 mm corner radius ensures consistent tool life and predictable surface finish in turning operations; the insert is suitable for both external and internal turning where stable chip control is required. Order the insert through Metav Werkzeuge or request application advice from our consultants to ensure holder compatibility and optimal cutting data. SNGG 090308 X407 turning insert – Tungaloy (ISO square insert, 90°) SNGG090308-01 X407 Tungaloy insert for ISO‑standard turning, designed for general external and internal turning with a focus on wear resistance and cutting‑edge stability ISO‑standard square insert, 90° cutting angle Tungaloy X407 grade for wear resistance 0.8 mm corner radius for versatile finishes Cylindrical hole fixing, 3.18 mm plate thickness Reliable machining performance and measurable gains This indexable insert is produced from carbide and the X407 grade targets a balance of wear resistance and toughness, delivering repeatable performance in typical turning cycles. The ISO geometry provides a standardised seating and datum for toolholders, meaning set‑up and repeatability are improved; selecting a holder that matches the insert's shape, relief angle and tolerance class is essential for predictable results. The 90° cutting angle and 0° relief promote robust engagement in straight turning operations, while the 0.8 mm corner radius helps spread cutting forces to extend edge life and produce a consistent surface finish. Practical compatibility and straightforward clamping Compatibility is determined by geometry and fixing method rather than brand alone. The square plate form with a cylindrical hole allows positive clamping with common screw and clamp systems; the plate thickness 3.18 mm must be matched to the seat in the holder for secure seating. Because the insert conforms to ISO specifications, it is straightforward to verify fitment by comparing form, free angle, size and thickness against the toolholder data. The standardised form reduces setup time and simplifies inventory management across multiple machines and holders. Better chip control and surface quality with the right chipbreaker A correctly chosen chipbreaker and grade reduce built‑up edge and stabilise cutting conditions. The integrated chipbreaker variant supplied with this insert supports controlled chip formation in a range of steels and common materials used in general turning. With appropriate cutting parameters, users can expect improved surface integrity and fewer interruptions for chip clearing, contributing to steadier cycle times and higher productivity on batch runs or series parts. Selection advice and lifecycle considerations When pairing inserts and holders, consider workpiece material, rigidity of the set‑up and machining strategy. The carbide substrate and X407 coating selection favour applications where a compromise of wear resistance and toughness is required; this makes the insert suitable for general turning tasks where tool life and reliability matter. Replacing indices at recommended wear limits and ensuring correct torque on clamping screws preserve both insert life and part quality. For special materials or finishing goals, consult technical data sheets or machining guides to fine‑tune speeds and feeds. For tailored application advice or to confirm holder compatibility for the Tungaloy X407 insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930; Metav Werkzeuge will advise on selection and availability Technical data Article number: 6806502 Manufacturer SKU: TUN6806502 SKU: 6806502-Tungaloy Model series: ISO‑turning indexable inserts ISO code: 090308 Plate size: 09 Plate thickness: 3.18 mm Corner radius: 0.8 mm Cutting angle: 90° Relief angle: 0° Plate form: square Hole: with cylindrical hole Grade: X407 (Tungaloy) Material: carbide Chipbreaker: 01 Application: turning ISO designation: SNGG090308-01 FAQ What materials is this insert suited for? The Tungaloy SNGG090308-01 insert in X407 grade is intended for general turning applications and offers a balance of wear resistance and toughness suitable for a broad range of steels and common machining materials. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius reduces cutting edge stress and helps produce a consistent surface finish while extending edge life; it suits general finishing and medium‑roughing passes. What must be checked to ensure holder compatibility? Verify holder seat geometry, relief angle (0°), plate thickness (3.18 mm), clamping method and tolerance class to ensure the insert seats correctly and clamps securely. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGG 090308 X407 Wendeplatten - Tungaloy
Take advantage of the ISO‑standard geometry and the Tungaloy X407 carbide grade for consistent wear resistance and edge stability; the square form with a 0.8 mm corner radius supports rigid setups and repeatable results. Order directly via Metav Werkzeuge or consult the team for application-specific guidance. SNGG090308-01 X407 ISO turning indexable insert — square, 0.8 mm radius (Tungaloy) The SNGG090308-01 X407 is an ISO‑standard square indexable insert designed for general turning operations, combining a robust carbide grade with a cylindrical hole and a 0° clearance to ensure secure clamping and stable cutting performance ISO‑standardised turning insert Tungaloy X407 carbide grade Square form, 0.8 mm corner radius Cylindrical hole for secure clamping High productivity through material and grade selection The combination of an ISO‑standard geometry and the proprietary X407 carbide grade yields a cutting solution optimised for repeatable results in many turning tasks. Carbide provides a high degree of wear resistance, while the X407 formulation balances hardness and toughness to protect the cutting edge under varying loads. This balance reduces the frequency of index changes, supporting a more continuous production flow and lower machine downtime. The result is measurable efficiency gains for workshops that require consistent component quality. Secure clamping and stable set-up for precise turning A square plate with a 0.8 mm corner radius and a cylindrical hole offers both positional stability and straightforward clamping in compatible holders. The 0° clearance angle and the plate thickness contribute to a rigid cutting arrangement, improving dimensional repeatability on turned parts. Because holder compatibility depends on form, clearance geometry and thickness, this insert integrates into standard ISO turning systems, enabling fast set‑up and predictable machining performance. The mechanical stability also helps to maintain surface finish and tool life under moderate to demanding cutting conditions. Versatile application guidance for efficient machining Engineered for both external and internal turning, the insert works with the appropriate chipbreaker and grade selected according to workpiece material and cutting strategy. Match the X407 grade and the chipbreaker style to the substrate and the machining stability required: this will deliver controlled chip formation and protect the edge. Where process reliability and consistent surface quality are priorities, this indexable insert supports stepwise optimisation of feeds and cutting depths without sacrificing component tolerances. For operations seeking a balance of economy and robustness, the plate is a solid choice. Contact Metav Werkzeuge for application advice or to order the Tungaloy insert directly via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6806497 Manufacturer SKU: TUN6806497 Label: SNGG090308-01 X407 Tungaloy-Wendeplatte SKU: 6806497-Tungaloy Core specifications Geometry designation: SNGG090308-01 (ISO 090308) Form: square (09 size) Corner radius: 0.8 mm Thickness: 3.18 mm Special features Carbide cutting material Grade: X407 (Tungaloy) Chipbreaker: 01 Clearance angle: 0° Hole: with cylindrical hole Intended application: turning Model series: ISO turning indexable inserts FAQ What machining tasks is this insert suited to? The SNGG090308-01 X407 insert is intended for general turning tasks; it is suitable for both external and internal turning when paired with a compatible holder and the appropriate chipbreaker. How does the X407 grade affect tool life? The Tungaloy X407 grade combines wear resistance and toughness to extend edge stability under mixed cutting conditions, improving tool life compared with less optimised grades. Which holder features are required for correct compatibility? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder matches the ISO designation and the 0° clearance geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120402 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, uncoated NS9530 cermet grade and a controlled 0.2 mm corner radius for outstanding surface finish and low cutting forces; the ISO geometry ensures repeatable fit in compatible holders. Order the insert through Metav Werkzeuge or consult their advisors for holder compatibility and optimal chipbreaker selection. SNGG120402-01 NS9530 – Square ISO turning insert for fine finishing, Tungaloy The SNGG120402-01 is an ISO‑format square turning insert designed for external and internal turning, optimised for fine finishing of steels with continuous cuts and small depths of cut. ISO square turning insert, 12 mm size Uncoated cermet grade NS9530 for fine finishes 0° clearance angle for steady engagement 0.2 mm corner radius for controlled chip formation Consistent fine finishing from a cermet grade built for low forces The uncoated NS9530 cermet is engineered as a finishing grade for steel, combining a sharp cutting edge with reduced friction and low cutting forces. This results in improved part surface finish and reduced tendency for built-up edge during continuous turning. Cermet, a ceramic‑metal composite, maintains hardness at elevated temperatures while delivering a more stable cutting edge than many traditional grades; this makes the insert particularly suited to small depths of cut where surface quality and edge integrity are decisive. The concise geometry and sharp edge ensure reliable, repeatable finishes across batches. Predictable fit and handling with ISO‑compliant geometry The insert follows ISO guidance for indexable turning plates, offering a square insert form with a 12 mm size and 4.76 mm thickness, and a 0.2 mm corner radius that helps to control cutting forces and edge strength. The 0° clearance specification and a cylindrical hole facilitate secure clamping in appropriately matched holders. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters gives a stable setup and consistent tool life. Selecting the correct chipbreaker and grade according to workpiece stability and machining strategy is essential to exploit the geometry fully. Process efficiency and application guidance for turning operations As a finishing insert for turning, the plate excels in external and internal turning where a sharp edge and steady chip control are required. The supplied chipbreaker style (01) is intended to suit continuous cutting where chips must be reliably managed to avoid surface damage. Integrating this insert into a workflow typically reduces rework due to improved first‑pass surface quality and predictable tool behaviour. For best results, pair the plate with a rigid holder and set cutting parameters consistent with finishing cuts; this approach promotes longer intervals between indexing and maintains component tolerances. For precision finishing with Tungaloy's NS9530 grade, request the SNGG120402-01 through Metav Werkzeuge or ask Metav Werkzeuge's consultants for holder and chipbreaker recommendations via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6997806 SKU: 6997806-Tungaloy Model series: ISO turning indexable inserts ISO designation: SNGG120402-01 Grade: NS9530 Chipbreaker: 01 Hole: with cylindrical hole Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included angle: 90° Plate form: square Special features Uncoated cermet cutting material Intended for finishing of steel ISO‑compliant geometry for interchangeability Cylindrical hole for secure clamping Compatibility determined by holder form, clearance, tolerance, fastening, size and thickness FAQ Which materials are suitable for this insert? The SNGG120402-01 in NS9530 is specified as a finishing grade for steel and is optimised for continuous cuts where a sharp edge and high surface quality are required. How does the 0.2 mm corner radius affect machining? A 0.2 mm radius provides a balance between edge strength and surface finish; the modest radius reduces cutting stress while still supporting fine external and internal finishing operations. Is this insert compatible with standard ISO holders? The plate follows ISO geometry conventions, but compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness; matching these parameters ensures correct fit and clamping stability. What role does the chipbreaker type 01 play? Chipbreaker 01 is intended for controlled chip formation during continuous finishing cuts, improving chip flow and reducing the risk of surface damage on the workpiece. Can this insert be used for roughing applications? No; the NS9530 cermet is a finishing grade designed for low cutting forces and high surface quality rather than heavy material removal. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120404 GH110 Wendeplatten - Tungaloy
Take advantage of the GH110 grade and the ISO 120404 geometry to achieve stable tool life and consistent part finishes; the square, 12 mm format with a 0.4 mm corner radius and cylindrical hole ensures repeatable clamping and quick index changes. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. SNGG 120404 GH110 – ISO indexable turning insert for turning, by Tungaloy SNGG120404-01 GH110 is a square ISO indexable insert engineered for external and internal turning with a 90° approach angle and a secure, cylindrical-hole mounting ISO 120404 indexable insert Cemented carbide GH110 grade 90° cutting angle for robust turning Cylindrical hole for secure clamping Higher productivity through stable wear and edge control The combination of the GH110 grade and the insert’s geometry gives measurable process stability: cemented carbide construction offers enhanced wear resistance while maintaining essential toughness, which reduces edge chipping under interrupted cuts. This leads to fewer index changes and longer mean time between regrinds, supporting improved machine utilisation and predictable cycle times. The square format and 90° approach angle enable straightforward set-up in standard external and internal turning holders, simplifying tool management in production environments. Faster set-up and consistent clamping for repeatable parts Designed with a cylindrical hole and a standard ISO form, the insert slips into common clamping systems with defined tolerances so mounting repeatability is high and runout is minimised. The 0.4 mm corner radius produces reliable part radii and strength at the cutting edge, balancing finish quality and edge robustness. For shops that run mixed batches, the ISO compatibility reduces inventory complexity: keep a single holder type and swap inserts to match material and process requirements. Practical selection and machining guidance for turning When integrating this insert into a toolset, match the chipbreaker 01 and the GH110 grade to the workpiece material and machining stability; the grade complements the geometry by providing a targeted mix of wear resistance and edge stability. The insert’s 4.76 mm thickness and 12 mm size deliver mechanical support in heavier cuts while still allowing fine finishing passes. For routine operations, choose cutting parameters that exploit the grade’s wear properties to extend life rather than pushing extremes—this approach reduces unexpected tool changes and supports steady production quality. For reliable availability and application support for the Tungaloy GH110 indexable insert, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 to discuss holder compatibility or order under SKU 6806520-Tungaloy Technical data Article number: 6806520 Manufacturer SKU: TUN6806520 Material: Cemented carbide Series: ISO indexable turning inserts Key dimensions ISO designation: 120404 Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 90° Design and application Shape: square Hole: with cylindrical hole Clearance angle: 0° Chipbreaker: 01 Grade/coating: GH110 (Tungaloy) Intended use: Turning FAQ What machining tasks is the SNGG120404-01 GH110 insert designed for? The SNGG120404-01 GH110 Tungaloy indexable insert (SKU 6806520-Tungaloy) is intended for external and internal turning operations where a square ISO 120404 geometry and a 90° approach angle are required. How is holder compatibility determined for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the GH110 grade and the ISO format make the insert suitable for standard turning holders with cylindrical-hole clamping. Which edge and finish can be expected from the insert? With a 0.4 mm corner radius and the GH110 carbide grade, the insert provides a robust cutting edge that supports good surface finish while resisting edge chipping in typical turning conditions. Does the insert include a chipbreaker and what is its function? Yes, the insert uses chipbreaker 01 which, together with the GH110 grade, helps control chip formation and evacuation to maintain a stable cutting process and consistent finishes. What key specifications should be checked before ordering? Verify the ISO 120404 form, the 12 mm size, 4.76 mm thickness, 0° clearance and cylindrical-hole mounting to ensure correct fit with existing holders and the intended turning application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120404 GH110 Wendeplatten - Tungaloy
Take advantage of the ISO conformity, the GH110 Tungaloy grade and the compact square format for reliable external and internal turning operations; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. SNGG 120404 GH110 – ISO turning insert by Tungaloy, square 12 mm, 0° relief A SNGG120404-01 GH110 Tungaloy insert designed for precision external and internal turning in ISO-compatible holders, offering a balance of wear resistance and edge stability. ISO 120404 square insert, 12 mm size GH110 Tungaloy grade for wear resistance 0° relief angle for stable cutting Cylindrical-hole clamping, 0.4 mm corner radius Reliable ISO fit for consistent machining results The insert conforms to the ISO 120404 designation and is manufactured in a square format with a 12 mm side length, ensuring straightforward compatibility with standard indexable turning holders. This ISO standardisation simplifies tool set-up and spare-part management in production environments, reducing downtime. The supplied geometry, including the 90° included angle, supports both external and internal turning operations and promotes predictable chip flow when combined with the correct chipbreaker and holder selection. Grade and substrate delivering extended tool life Manufactured from cemented carbide and specified in the GH110 Tungaloy grade, the insert is engineered for a blend of wear resistance and edge toughness. This combination helps maintain cutting-edge integrity under varying cutting conditions, extending service intervals and improving process economy. The grade complements the insert geometry so that, in applications prioritising longevity over maximum metal removal rates, operators can expect dependable performance and reduced frequency of index changes. Geometry and clamping for process stability The insert features a 0° relief angle and a corner radius of 0.4 mm, which together provide a stable cutting edge for general turning tasks where surface finish and dimensional control matter. Clamping is via a cylindrical hole, designed for secure axial location in compatible holders; this ensures repeatable positioning after index changes. When paired with an appropriate chipbreaker (type 01) and a robust external holder or boring bar, the system promotes vibration damping and consistent results across batches. Practical selection and application guidance For efficient use, pair the insert with an ISO-compatible external holder or boring bar that matches the form, clearance angle, tolerance class, fastening method, size and thickness requirements of the insert. Select the chipbreaker and grade based on workpiece material and machining stability: the GH110 grade suits a wide range of turning tasks where a balance of productivity and tool life is required. Simple checks during tool set-up—correct seat, clean clamping surfaces and appropriate torque for the fixing screw—help achieve the expected repeatability and surface quality. For precision turning tasks with the Tungaloy GH110 grade, contact Metav Werkzeuge for tailored application advice and fast supply – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806515 Manufacturer SKU: TUN6806515 SKU: 6806515-Tungaloy Model series: ISO turning indexable inserts Key measurements ISO designation: 120404 Insert designation: SNGG120404-01 Insert shape: square Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° Hole: with cylindrical hole Materials & suitability Substrate: cemented carbide Grade: GH110 (Tungaloy) Chipbreaker: 01 Intended use: turning (external and internal) System components: ISO insert, matching external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The SNGG120404-01 GH110 Tungaloy insert is designed for general turning; the GH110 grade provides a balance of wear resistance and toughness suitable across a broad range of steels and common engineering materials when paired with the appropriate machining parameters. How is the insert clamped in the holder? Clamping is via a cylindrical central hole; the insert locates axially and is secured with a matching screw and clamping set in an ISO-compatible external holder or boring bar. What does the 0° relief angle mean for cutting performance? A 0° relief offers a neutral clearance that stabilises the cutting edge for many turning operations, aiding dimensional consistency and surface finish when used with the correct holder rigidity and cutting parameters. Can this insert be used for internal (boring) operations? Yes, the square geometry and ISO designation make the insert suitable for both external and internal turning, provided the chosen boring bar or holder matches the insert form, size and clamping style. How does the GH110 grade influence tool life? The GH110 Tungaloy grade is formulated to balance wear resistance and edge stability, extending effective cutting life in typical turning applications and helping to reduce tool-change frequency under stable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120404 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet durability, precise 0.4 mm corner radius, and ISO compatibility for steady finishing cycles; order the insert via Metav Werkzeuge or consult Metav Werkzeuge for application advice. SNGG 120404 GT9530 turning indexable insert — 0.4 mm radius, 90° geometry (Tungaloy) SNGG120404-01 GT9530 is an ISO‑standard turning indexable insert engineered for external and internal turning, optimised for stable finishing of steel components. Coated cermet GT9530 for durable finishing ISO‑standard SNGG 120404 form for wide compatibility 0.4 mm corner radius for fine surface quality Cylindrical hole and 90° geometry for secure clamping Higher surface quality with extended tool life The coated cermet GT9530 grade is aimed at finishing to light‑universal operations on steel where surface integrity and extended tool life are priorities. A cermet is a ceramic‑metal composite that combines high hardness with improved wear resistance; the applied coating enhances resistance to adhesive wear and supports longer tool life under stable cutting conditions. The result is fewer insert changes and more consistent batch quality, which supports efficient production planning and lower operating costs. Reliable fit and secure clamping for repeatable results Compatibility is determined by insert form, relief angle, tolerance class, clamping method, size and thickness; the ISO‑standard SNGG 120404 form ensures interchangeability with suitable holders. The insert features a cylindrical hole and a square shape with a 90° insert angle, paired with a 0.4 mm corner radius that assists in achieving fine surface finishes without compromising edge strength. The 4.76 mm thickness and the defined relief angle support secure clamping and repeatable positioning in standard ISO external holders, reducing setup variability and improving process stability. Selection guidance and machining considerations For best performance, match the GT9530 grade and the chipbreaker style to workpiece material and machine rigidity; the supplied chipbreaker code 01 is geared towards stable operations where consistent chip formation is required. In practice, this insert is suited to turning of steel under rigid setups, offering good surface finish in finishing passes. If vibration or interrupted cuts are anticipated, selecting alternative chipbreakers or adapting cutting parameters will maintain edge life. For customers needing help with parameter selection, Metav Werkzeuge can advise on optimal cutting data for specific machines and materials. For stable finishing on steel, choose the Tungaloy SNGG120404-01 GT9530 through Metav Werkzeuge and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997769 Manufacturer SKU: TUN6997769 Model series: ISO‑Drehwendeschneidplatten Manufacturer: Tungaloy Core specifications Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Insert angle: 90° Relief angle: 0° Materials and special features Cutting grade: GT9530 (coated cermet) Substrate material: Hartmetall Chipbreaker: 01 Hole style: cylindrical hole Shape: square insert Typical application: turning FAQ What materials is this insert designed for? The GT9530 grade is developed primarily for turning steel, offering good surface finish and extended life in stable finishing operations. Can the insert be used for internal as well as external turning? Yes, the ISO‑standard SNGG form and the insert geometry permit both external and internal turning when paired with the appropriate holder and stable setup. How does the 0.4 mm corner radius affect the finish? A 0.4 mm radius balances edge strength and surface quality: it smooths the transition between passes to improve finish while maintaining adequate robustness for finishing cuts. What does the coated cermet GT9530 provide compared with conventional grades? Coated cermet combines high hardness with a wear‑resistant coating, delivering enhanced finish quality and longer tool life in finishing tasks on steel under steady conditions. Which chipbreaker should be chosen for interrupted cuts? The supplied chipbreaker 01 is optimised for stable, continuous cuts; for interrupted cutting conditions, alternative chipbreaker geometries or adjusted cutting parameters are recommended to preserve edge integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGG 120404 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (GT9530) for extended wear resistance, the ISO SNGG geometry for straightforward holder compatibility, and precise chip control for reliable finishing on steel; order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. SNGG 120404 GT9530 indexable turning insert — ISO SNGG120404-01 by Tungaloy A SNGG120404-01 GT9530 indexable turning insert engineered for external and internal turning, offering a coated cermet grade optimised for finishing and longer tool life in stable turning conditions Coated cermet GT9530 for long life ISO SNGG geometry for standard holders Fine surface finish on steel Cylindrical hole for secure clamping Reliable finishing and longer tool life The GT9530 coated cermet grade is designed as a wear-resistant finishing to light-universal grade for steel, delivering a balance between surface quality and tool life. The cermet coating reduces flank wear and maintains edge integrity under stable cutting conditions, which means more consistent part quality and fewer insert changes. For shops prioritising surface finish, this grade provides a measurable improvement in component appearance while maintaining predictable performance over a production run. Consistent fit with ISO SNGG geometry The insert follows ISO SNGG geometry, so compatibility with holders depends on form, relief, tolerance class, clamping method, size and thickness. The square 12 mm format and 4.76 mm plate thickness combine with a 0° relief angle and a 0.4 mm corner radius to give a reliable seating in standard external-holding tools. The cylindrical hole ensures secure clamping and repeatable positioning, reducing set-up variance and supporting reproducible results across batches. Controlled chips and adaptable application range Equipped with chipbreaker 01, the insert supports effective chip formation for external and internal turning tasks when the machining setup is stable. The chip control helps prevent entangling and supports continuous machining cycles, contributing to process reliability. For mixed production, selecting the correct chipbreaker and matching the GT9530 grade to the workpiece and cutting conditions will maximise productivity and minimise unplanned stoppages. Simple integration into the tool system and predictable economy The ISO plate integrates into a modular system comprising the insert, a compatible external holder or boring bar, a locating pad/clamp set and replacement fastening screws. Such a system approach streamlines inventory management and reduces downtime when inserts are changed. The cemented carbide substrate combined with the coated cermet top layer offers a compelling balance of precision, longevity and economical performance in series production environments. Contact Metav Werkzeuge today to discuss the SNGG 120404 GT9530 insert for specific turning tasks or to request cutting-data guidance; Metav Werkzeuge can advise on holder compatibility and optimal cutting parameters via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997770 SKU: 6997770-Tungaloy Manufacturer SKU: TUN6997770 Model series: ISO turning indexable inserts Facts ISO designation: 120404 Corner radius: 0.4 mm Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Insert angle: 90° Special features Grade: GT9530 (coated cermet) Substrate: cemented carbide Shape: square Hole: cylindrical hole (with bore) Chipbreaker: 01 Application: external and internal turning System: ISO insert, holder and clamp set compatibility FAQ What materials is this insert suited for? The SNGG120404-01 GT9530 insert is specified for machining steel with a focus on finishing operations where a good surface and extended life are required. Which holders will accept the ISO SNGG120404-01 geometry? Holders designed for ISO SNGG inserts that match form, relief angle, tolerance class, clamping method, size (12 mm) and thickness (4.76 mm) will accept the SNGG120404-01 GT9530 insert. How does the GT9530 grade affect surface finish? The GT9530 coated cermet reduces flank wear and maintains edge sharpness, producing a finer surface finish compared with conventional grades under stable turning conditions. Is the insert suitable for both external and internal turning? Yes, the insert is intended for external and internal turning; chipbreaker 01 and appropriate holder selection enable versatile application. What are the key dimensions to check before fitting the insert? Verify plate size (12 mm), thickness (4.76 mm), corner radius (0.4 mm), relief angle (0°) and the cylindrical hole compatibility to ensure correct fit and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance and straightforward ISO compatibility to improve turning productivity and surface quality. The uncoated NS9530 cermet grade and the fine 0.4 mm corner radius deliver low cutting forces and excellent surface finish in steel turning. Order or request specification advice directly via Metav Werkzeuge if further data is required. SNGG 120404 NS9530 indexable insert for turning — Tungaloy SNGG120404-01 NS9530 is an ISO-standardised turning indexable insert intended for precision finishing in steel turning applications NS9530 finishing cermet grade for steel Sharp edge for superior surface finish ISO SNGG 120404, square 12 mm format 0.4 mm corner radius for fine profiling Exceptional finishing with reduced cutting forces This insert combines an uncoated cermet composition with a finishing geometry engineered for low cutting loads. The finishing grade NS9530 produces a sharp cutting edge that reduces ploughing and minimises burr formation, which in turn improves throughput by cutting down secondary finishing. For operations with continuous cuts and small depths of cut, this characteristic yields a high surface finish and consistent part quality while keeping cutting forces low. The material behaviour of cermet is explained by its ceramic-rich microstructure: it sustains a keen edge at finishing speeds and resists built-up edge formation on steel, so less rework is required and cycle reliability is enhanced. ISO compatibility for fast integration and predictable set-up As an ISO-design insert, compatibility with toolholders is defined by form, clearance angle, tolerance class, fastening method, size and thickness. The SNGG format and its square 12 mm footprint permit straightforward mounting in standard external holders or boring bars; the insert features a cylindrical hole for secure clamping and a defined 0° clearance geometry for accurate tool orientation. This standardisation reduces set-up time and simplifies inventory management across machines. Selecting the correct chipbreaker and insert grade for the workpiece and stability of the set-up ensures reliable chip control and stable cutting conditions, thereby increasing machine utilisation and reducing process variability. Predictable tool life and process benefits from controlled geometry The moderate corner radius 0.4 mm supports fine profiling and consistent corner form while reducing the risk of corner chipping in finishing passes. For steel turning, the grade delivers repeatable wear behaviour and good surface integrity when used at recommended feeds and speeds. The insert’s square form and 90° included angle make it well suited to both external and internal turning tasks where tight tolerances and good surface quality are required. Together these features lead to a predictable tool life, fewer tool changes and improved overall process efficiency — advantages that support lean production goals and stable part output. Contact Metav Werkzeuge for tailored advice on using Tungaloy finishing-grade inserts in steel turning and to request further technical specifications via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997807 Manufacturer SKU: TUN6997807 Metav SKU: 6997807-Tungaloy Brand: Tungaloy Designation: SNGG120404-01 NS9530 Shape: square Hole style: with cylindrical hole Core figures Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 90° Special features Uncoated cermet NS9530 Finishing grade for steel Suitable for external and internal turning ISO-standard insert format Compatible with appropriate holders and clamping sets Cylindrical hole for screw/clamp fixing Square plate form FAQ What materials is this insert intended for? The NS9530 grade is designed primarily for finishing operations in steel; the SNGG120404-01 insert offers a sharp edge and low cutting forces for reliable steel turning. Can this insert be used for both external and internal turning? Yes, the square format and 90° included angle make the insert suitable for external and internal turning when mounted in the correct holder. How does the 0.4 mm corner radius affect part quality? A 0.4 mm corner radius gives a refined profile and improves surface integrity in finishing passes while reducing the risk of minor chipping under stable cutting conditions. Is the insert compatible with standard ISO holders? The insert follows ISO dimensions; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness — confirm holder specifications before mounting. Does the grade require a coated surface treatment? This offering is an uncoated cermet finishing grade (NS9530) optimised for sharp-edge performance in finishing, where coatings are typically not required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120404 NS9530 Wendeplatten - Tungaloy
Combine the precision of a cermet finish grade with ISO conformity and a fine corner radius for consistently high surface quality; ideal where low cutting forces and repeatable finishes matter. Order the insert via Metav Werkzeuge or consult our specialists for application-specific selection and availability. SNGG 120404 NS9530 indexable turning insert for turning, Tungaloy The SNGG120404-01 NS9530 is an ISO-designated square indexable insert designed for precision finishing in turning applications, optimised for continuous cuts and minimal cutting forces. ISO square insert 12 mm size Finish grade NS9530 for steel 0.4 mm corner radius for fine finishes 0° relief angle, cylindrical hole Precision finishing with a cermet cutting edge The insert’s NS9530 cermet grade is formulated for finishing operations on steel, delivering a sharp cutting edge and reduced cutting forces that translate directly into improved surface quality and longer steady-state performance. Cermet materials combine ceramic hardness with metal toughness, enabling a consistent edge geometry suited to continuous cuts and small depths of cut. For manufacturers aiming to reduce rework and meet tight surface tolerances, this finish grade offers measurable advantages in process stability and part appearance. Designed for reliable clamping and ISO-assisted compatibility Produced as an ISO 120404 format, the square geometry and specified dimensions ensure predictable compatibility with standard external holders and boring bars when the holder’s form, clearance angle, tolerance class, fastening method, size and thickness match the insert. The insert features a cylindrical hole for positive location and a plate thickness of 4.76 mm, supporting secure clamping and repeatable positioning. Clear identification of these parameters simplifies tool assembly and minimises downtime during index changes. Lower forces, better surfaces, less vibration A small 0.4 mm corner radius and the sharp cermet edge reduce engagement forces and the tendency to build up material on the cutting edge, which in turn lowers the risk of chatter and improves surface finish. Choosing the matching chipbreaker (01) for this grade and adapting feeds and depths for finishing cuts helps to exploit the material’s strengths: consistent dimension control, excellent surface texture and efficient cycle times. These characteristics are particularly relevant for high-volume production where repeatability directly affects throughput and quality. Practical selection and handling advice for series use When integrating this insert into a production line, select a holder and fastening system compatible with the ISO form and the plate thickness to ensure correct seat and clearance. As an uncoated cermet finishing grade, the insert performs best under stable cutting conditions with continuous material flow; intermittent or heavily interrupted cuts may require a different grade. If there is uncertainty about suitability for a specific steel grade or machine rigidity, our team can advise on the optimal chipbreaker and operational parameters to achieve the required surface quality and tool life. For additional technical data or application examples, contact Metav Werkzeuge by email or phone. Contact Metav Werkzeuge for tailored cutting data and to source Tungaloy inserts quickly: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6997814 SKU: 6997814-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 120404 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Seat angle: 90° Special features Grade: NS9530 (uncoated cermet) Shape: square Hole: with cylindrical hole Chipbreaker: 01 Application: Turning (finishing) Material: Carbide substrate FAQ What materials is this insert suitable for? The NS9530 grade is designed primarily for steel finishing; the insert’s composition supports continuous cuts with low cutting forces for high-quality surface finishes. What does the ISO designation 120404 indicate? ISO 120404 defines the insert’s geometric series and size family; it helps to match the plate to compatible external holders and ensures consistent seat and clearance when assembling toolholders. How is the insert secured in the holder? The insert uses a cylindrical hole for positive location and is clamped by a compatible holder; compatibility depends on matching form, relief angle, tolerance class, fastening type, size and thickness. Is the NS9530 grade coated? No, NS9530 is supplied as an uncoated cermet finishing grade chosen for its sharp edge and low cutting forces in continuous finishing operations. What corner radius does the insert have and why does it matter? This insert has a 0.4 mm radius, which supports fine surface finishes and reduced cutting forces; a smaller radius helps achieve tighter surface tolerances in finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated cermet NS9530 grade, a precise corner radius 0.4 mm, and ISO compatibility for repeatable finishing results; order the insert directly via Metav Werkzeuge or ask our consultants for application support. SNGG 120404 NS9530 Turning insert — Tungaloy SNGG120404-01 is a square ISO indexable insert for precision finishing in external and internal turning applications. ISO-standard square insert for turning Uncoated cermet grade NS9530 Sharp cutting edge for fine finishes Corner radius 0.4 mm for precise profiling Superior surface finish with lower cutting forces The uncoated cermet NS9530 is designed as a finishing grade for steel, offering a sharp cutting edge that reduces cutting forces and delivers consistently fine surface quality. For continuous cuts and small depths of cut the combination of cermet chemistry and a small corner radius provides a stable cutting action and predictable tool life, which lowers rework and increases throughput. The result is fewer interruptions for dressing or secondary operations, supporting a smooth production flow. Fast integration into existing turning systems Being an ISO-format insert, compatibility with a holder is determined by form, relief angle, tolerance class, clamping method, size and thickness. The insert is intended to be used with a matching outer holder or boring bar together with a shim/clamp set and replacement screws, enabling quick tool changes and reduced setup times. With a plate thickness of 4.76 mm, an inscribed circle of 12 mm and a 0° clearance angle, the component fits common finishing holders and supports reliable clamping for consistent cutting performance. Practical guidance to secure consistent productivity Select a chipbreaker and grade that match the workpiece material, machining style and machine rigidity; for finishing, the NS9530 grade excels in continuous, disturbance-free passes. A suitable chipbreaker controls chip formation and evacuation, maintaining edge integrity and surface quality. Although optimised for finishing and low-depth cuts, the insert is less suited to heavy interrupted cuts; where interruption or heavy roughing is required, consider a more robust grade. Proper selection increases productivity and reduces tool-change frequency. Contact Metav Werkzeuge today for application advice on Tungaloy NS9530 finishing inserts and let our consultants confirm holder compatibility and the optimal chipbreaker for each turning task Technical data Product designation: SNGG120404-01 Manufacturer article number: 6997813 SKU: 6997813-Tungaloy Manufacturer SKU: TUN6997813 Model series: ISO turning inserts Manufacturer: Tungaloy Facts Thickness: 4.76 mm Inscribed circle / size: 12 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 90° Chipbreaker: 01 Grade: NS9530 Special features Material: cemented carbide substrate Grade / coating: uncoated cermet NS9530 Plate form: square Hole: cylindrical hole Intended use: external and internal turning System composition: insert, matching outer holder or boring bar, shim/clamp set and replacement screws Application focus: finishing operations, continuous cuts, small depth of cut FAQ What materials is this insert best suited for? The Tungaloy SNGG120404-01 in grade NS9530 is optimised for finishing operations on steel, providing high surface quality and low cutting forces for continuous cuts. Does the insert fit standard ISO holders? Yes, the insert is ISO-formatted; compatibility depends on holder form, relief angle, tolerance class, clamping style and the insert dimensions such as thickness and inscribed circle. What does the small corner radius offer in practice? A 0.4 mm corner radius gives precise profiling and improved surface finish during fine turning, while keeping cutting forces low for reduced tool deflection. Is the insert coated or uncoated? This grade is an uncoated cermet (NS9530), chosen for its sharp edge and superior finish in light, continuous turning operations. Which chipbreaker should be chosen for finishing? Select a chipbreaker that matches the workpiece material and machine rigidity; the chipbreaker code 01 supplied with the insert is intended for fine finishing and controlled chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120404 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO‑standard compatibility and the uncoated carbide TH10 grade to achieve lower cutting forces and cleaner surfaces in non‑ferrous turning operations; the square 12 mm format with a 0.4 mm corner radius delivers predictable contact and repeatable results. Order the SNGG120404-01 TH10 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SNGG120404-01 TH10 indexable insert for turning — Tungaloy SNGG120404-01 TH10 is a square ISO indexable insert designed for precise external and internal turning, optimised for non‑ferrous materials and applications requiring a clean cutting edge ISO‑standard square insert for turning Uncoated carbide grade TH10 for low cutting forces Cylindrical hole and 0° clearance angle 12 mm size, 4.76 mm thickness, 0.4 mm corner radius Predictable assembly and reduced setup time through ISO conformity The ISO‑standard designation ensures reliable match with compatible toolholders, since form, clearance angle, tolerance class, fastening method, size and thickness determine fit. This regularity simplifies stock management and reduces time lost to trial fittings: a correctly seated indexable insert means stable clamping and less spindle downtime. For workshop planners and production engineers, standardisation translates directly into predictable cycle times and fewer tool‑related interruptions. Cleaner surfaces and lower cutting forces with TH10 uncoated carbide The uncoated carbide composition in grade TH10 is formulated as a sharp, universal grade for non‑ferrous materials and situations where an uncoated cutting edge helps keep cutting forces low. This results in reduced power draw and improved surface finish on softer alloys and aluminium‑based components. The absence of a coating reduces thermal build‑up at the cutting edge during certain interrupted or light‑cut operations, supporting consistent part quality and easier regrinding when required. Geometry and chip control for repeatable turning results The square plate geometry with a 0.4 mm corner radius and chipbreaker 01 provides controlled chip formation for both external and internal turning. The insert’s cylindrical hole and 0° clearance angle allow secure fastening and stable cutting conditions, while the 12 mm size and 4.76 mm thickness support robust edge support under common machining forces. Together these characteristics promote consistent surface finishes and reliable tool life. The system build—ISO insert paired with a suitable external holder or boring bar, plus a shim/clamp kit and spare screws—ensures ease of replacement and minimal setup complexity. For tailored advice on selecting the right Tungaloy indexable insert or for quick procurement of SNGG120404-01 TH10, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for rapid, application‑oriented support and supply. Technical data Article number: 6806516 Manufacturer SKU: TUN6806516 Model series: ISO‑Drehwendeschneidplatten Designation: SNGG120404-01 TH10 Numbers / Core technical data Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 90° Clearance angle: 0° Chipbreaker: 01 Design / Special features Material: cemented carbide (uncoated) Grade: TH10, sharp universal for non‑ferrous materials Square plate form, cylindrical hole for fastening ISO‑standardised turning insert compatible with holders and boring bars System: insert, appropriate external holder or boring bar, shim/clamp set and spare screws Intended application: external and internal turning; select chipbreaker and grade for workpiece material and machining stability FAQ Is this insert compatible with standard ISO holders for turning? Yes. The SNGG120404-01 TH10 is an ISO‑standard indexable insert; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness, as described for the ISO turning insert series. For which materials is the TH10 grade recommended? The TH10 uncoated carbide grade is optimised for non‑ferrous materials and applications where a sharp, uncoated edge reduces cutting forces and improves surface finish. Can the insert be used for both roughing and finishing operations? The insert’s sharp TH10 grade and 0.4 mm corner radius are best for operations prioritising low cutting forces and quality finishes; selection between roughing and finishing should consider chipbreaker choice and cutting parameters. Does the product include fastening hardware? The supply concept for the ISO insert system typically comprises the insert plus the matching external holder or boring bar, a shim/clamp kit and spare screws; check the specific order contents when procuring. What is the manufacturer article number and SKU for ordering? Manufacturer article number: 6806516. Manufacturer SKU: TUN6806516. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGG 120404 TH10 Wendeplatten - Tungaloy
Take advantage of reliable turning performance and clean surface finishes thanks to the combination of the uncoated carbide TH10 grade and the square 12 mm plate with a 0.4 mm corner radius; these features reduce cutting forces and support consistent chip control. Order original Tungaloy inserts directly via Metav Werkzeuge or consult our technical advisors for application matching. SNGG 120404 TH10 SNGG120404-01 — Tungaloy ISO turning indexable insert for Turning, square 12 mm The SNGG120404-01 TH10 is a precision ISO‑standard indexable insert designed for external and internal turning where low cutting forces and good surface quality are required; it suits non‑ferrous and similar workpieces. ISO turning insert SNGG 120404 TH10 Square 12 mm plate with 0.4 mm radius Uncoated carbide grade TH10 for low cutting forces Cylindrical hole, 0° clearance, ISO compatibility Engineered for efficient turning and lower cutting forces The insert is made from uncoated carbide in the TH10 grade, engineered to provide a sharp edge for operations where minimal cutting force and improved surface finish are priorities. The square geometry combined with a 0.4 mm corner radius reduces tool‑induced vibration and stabilises the cut, so machinists benefit from consistent dimensional control and fewer rework cycles. The uncoated edge also helps when machining soft or non‑reactive materials, where a low friction, sharp tip produces cleaner results without the need for additional coatings. Compatibility that simplifies tool selection and setup Supplied as an ISO‑design insert, the plate matches standard external holders when the form, clearance, tolerance class, fastening method, size and thickness correspond. The cylindrical hole and the 0° clearance are designed for positive clamping in conventional insert seats, easing index changes and repeatable positioning. This predictability reduces setup time on the shop floor and simplifies inventory management, allowing production planners to select an insert that integrates with existing holder systems without bespoke adaptations. Material behaviour and finishing advantages The sharp uncoated carbide edge supports machining of non‑ferrous materials and applications where low cutting forces and a clean contact zone matter. Reduced built‑up edge tendency contributes to consistent surface quality and extended tool life in many short‑chipping scenarios. Where a high‑quality finish is required after turning, the geometry and grade combine to deliver improved surface integrity, lowering the need for secondary finishing operations and saving machining time on repeat production runs. Practical handling and process guidance Insertion and clamping follow standard indexable insert procedures: ensure the seat and screw set are clean, use the recommended torque for the clamping screw and verify seating with a test cut. The square plate form with its defined 90° included angle offers four usable cutting corners, supporting economical edge indexing. For best results, pair the insert with a holder compatible with the ISO size and thickness, and choose a chipbreaker and cutting parameters adapted to the workpiece material and rigidity of the setup to maximise stability and surface quality. Contact Metav Werkzeuge for application matching and to secure original Tungaloy indexable inserts with TH10 grade and ISO 120404 designation. Technical Data Article number: 6806521 Manufacturer SKU: TUN6806521 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Application: Turning Material: Carbide Grade: TH10 ISO designation: 120404 Name: SNGG120404-01 TH10 Tungaloy insert Hole: with hole (cylindrical) Facts Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 90° Manufacturer article number: 6806521 Special features Square plate form Uncoated carbide cutting edge Sharp universal grade for non‑ferrous materials Cylindrical central hole ISO‑standard turning insert Suitable for external and internal turning Four usable cutting corners (indexable) FAQ What materials is this insert best suited to machine? The Tungaloy SNGG120404-01 in TH10 grade is optimised for non‑ferrous materials and applications where a sharp, uncoated edge supports low cutting forces and clean surface finishes. How is the insert secured in the holder? The insert uses a cylindrical central hole and is clamped with the appropriate screw and seat; compatibility depends on holder form, size and tolerance matching the ISO 120404 specification. How many cutting edges are available per insert? The square plate form provides four usable cutting corners, offering economical indexing during production. Does the insert require a coating for general use? This grade is intentionally uncoated to maintain a sharp edge and low cutting forces; coatings are not necessary for its recommended applications and may alter cutting behaviour. What should be considered for achieving the best surface finish? Use a rigid setup, correct holder compatibility, and cutting parameters matched to the workpiece material; the combination of the TH10 grade and the 0.4 mm radius helps deliver improved surface integrity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGG 120404 X407 Wendeplatten - Tungaloy
Take advantage of wear-resistant carbide and the X407 grade’s balance of toughness and edge stability for reliable turning performance; combine this with ISO conformity and straightforward holder compatibility to maintain steady production. Order the insert directly via Metav Werkzeuge or consult the team for technical clarification. SNGG120404-01 X407 — Tungaloy ISO turning insert (square, 90°) SNGG120404-01 X407 is an ISO-standard square turning insert engineered for external and internal turning with a 90° included angle and a 0° clearance. ISO-standard SNGG insert, 90° square Tungaloy X407 grade for wear and edge stability 0.4 mm nose radius for accurate profiles Cylindrical hole, 4.76 mm thickness, carbide core Consistent cutting performance for productive turning The indexable insert is manufactured from carbide and provided in the Tungaloy X407 grade to deliver a designed compromise between wear resistance and edge stability. The 0.4 mm nose radius supports accurate profile turning while the square geometry with a 90° included angle offers robustness at interrupted cuts. For production environments where predictable tool life and repeatable results matter, this geometry and grade combination reduces unplanned downtime and helps sustain cycle-time targets. Clear ISO compatibility and secure clamping for reliable operation Compliance with ISO dimensions ensures the insert integrates with matching holders when form, clearance angle, tolerance class, fastening method, size and thickness are observed. The plate features a cylindrical hole to suit standard clamping systems and is used as part of a system comprising an appropriate external holder or boring bar, a support/clamping set and replacement screws. Correct selection of holder and clamping hardware secures the cutting edge position and maintains machining accuracy over repeated indexings. Practical selection advice and application range Select the chipbreaker and the X407 grade in line with the workpiece material, machining method and machine stability; the listed chipbreaker 01 is intended to assist chip control in many turning scenarios. The insert is suitable for both external and internal turning operations where a balanced combination of toughness and wear performance is required. When in doubt about chip form or feed rates, match the insert geometry and chipbreaker to the rigidity of the set-up to avoid edge chipping and improve surface finish. For reliable, production-ready turning with Tungaloy X407 inserts contact Metav Werkzeuge for procurement or technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806514 SKU: 6806514-Tungaloy Manufacturer SKU: TUN6806514 Model series: ISO-Drehwendeschneidplatten Name: SNGG120404-01 X407 Tungaloy insert Facts Size: 12 mm Thickness: 4.76 mm Nose radius: 0.4 mm Included angle: 90° Clearance angle: 0° Hole style: cylindrical hole Grade: X407 Material: carbide Special features Square plate geometry (SNGG form) Chipbreaker type 01 Cylindrical central hole for clamping ISO-standard turning insert for external and internal turning System components: holder, clamping set and replacement screws compatibility FAQ What machining tasks is the SNGG120404-01 X407 insert designed for? The SNGG120404-01 X407 Tungaloy turning insert is designed for external and internal turning operations where a square 90° geometry and a 0.4 mm nose radius are beneficial. How is holder compatibility determined for this insert? Compatibility depends on form, clearance angle, tolerance class, fastening method, plate size and thickness, so the SNGG120404-01 X407 should be matched to a holder that meets the same ISO parameters. Which chipbreaker should be chosen for stable chip control? The insert is supplied with chipbreaker 01; adjust the chipbreaker selection in line with workpiece material and rigidity—chipbreaker 01 is a general-purpose option for many turning scenarios. Is the central hole compatible with standard clamping systems? Yes, the cylindrical hole of the SNGG120404-01 X407 is intended for use with standard clamping hardware and the insert forms part of a system including the holder, support/clamping set and replacement screws. What advantages does the X407 grade provide? The Tungaloy X407 grade offers a balanced combination of wear resistance and edge stability, supporting consistent tool life and reliable cutting under varied turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard compatibility, GH110 carbide grade and a robust 0.8 mm corner radius for stable, productive turning operations; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SNGG 120408 GH110 SNGG120408-01 (Tungaloy) – Indexable insert for turning SNGG120408-01 GH110 Tungaloy indexable insert is an ISO-standard square carbide insert designed for external and internal turning, offering a 0.8 mm corner radius and a 0° relief angle for reliable edge performance. ISO-standard square insert, fits common holders GH110 grade carbide for wear resistance and toughness 0.8 mm corner radius for robust edge strength 0° relief with cylindrical hole for secure clamping Consistent productivity through optimised wear resistance The GH110 carbide grade combines wear resistance and sufficient toughness to extend tool life under mixed turning conditions. This balance reduces unexpected tool changes and supports longer uninterrupted runs, which translates into lower production downtime and improved machine utilisation. With a 0.8 mm corner radius and a square plate form, the geometry is aimed at delivering repeatable cutting performance and predictable flank wear, helping to maintain dimensional accuracy over multiple indexing cycles. Reduced setup time with ISO‑compatible geometry Being an ISO‑standard turning insert, the plate is compatible with a wide range of holders when matched by form, relief angle, tolerance class, fastening and thickness. The 4.76 mm plate thickness and 12 mm plate size conform to standard specifications, so clamping and replacement procedures are straightforward. This compatibility reduces setup time, simplifies tool inventory and supports quick changeovers in mixed‑model production environments. Stable clamping and edge security for demanding cuts The insert features a cylindrical hole for positive clamping and a nominal 90° approach angle, providing secure fixation in the pocket and minimising micro‑movement under cut. The combination of the cylindrical hole and the 01 chipbreaker form creates a stable cutting condition suitable for both external and internal turning. A secure clamping system combined with the GH110 edge material improves resistance to chipping and supports steady surface finish quality. Practical application notes and selection guidance Intended primarily for turning operations, the plate is supplied as part of a system: an ISO insert, a matching external holder or boring bar, clamping set and replacement screws. Select the chipbreaker and grade to match workpiece material, machining type and system rigidity; the GH110 grade is suited to applications where a balance of wear resistance and edge stability is required. For specific cutting data or tailored recommendations, technical consultation is available to ensure optimal performance and tool life. For high‑performance turning applications, rely on Tungaloy’s GH110 grade and contact Metav Werkzeuge for expert recommendations or to request the SNGG120408-01 insert directly. Technical data Article number: 6806535 SKU: 6806535-Tungaloy Manufacturer SKU: TUN6806535 Manufacturer article number: 6806535 Model series: ISO‑Drehwendeschneidplatten Facts Plate form: square Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Approach angle: 90° Hole: with cylindrical hole Special features Material: carbide Grade: GH110 (Tungaloy) Chipbreaker: 01 Application: turning (external and internal) System components: insert, holder/boring bar, clamping set, replacement screws FAQ What machining operations is this insert intended for? This insert is designed for turning operations; the SNGG120408-01 GH110 Tungaloy indexable insert is suitable for both external and internal turning when matched with an appropriate holder. Which grade and chipbreaker does the insert use? The insert uses the GH110 carbide grade with chipbreaker form 01, providing a compromise of wear resistance and edge stability for a variety of turning tasks. How does the insert clamp into the holder? Clamping is achieved via a cylindrical hole and the matching clamping set; the design ensures secure fixation and repeatable positioning for the SNGG120408-01 insert. What are the key dimensions to check before ordering? Key dimensions include the plate size (12 mm), plate thickness (4.76 mm), corner radius (0.8 mm) and relief angle (0°); verify these against the holder specification. Is this insert suitable for heavy interrupted cuts? The GH110 grade and 0.8 mm corner radius provide improved edge strength, which supports more robust performance under interrupted cutting, though final suitability depends on machine rigidity and chosen cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of GH110 Tungaloy grade, precise ISO dimensions and a secure clamping interface for consistent turning performance; order original inserts through Metav Werkzeuge or request technical guidance from the consultants. SNGG 120408 GH110 — Turning indexable insert (SNGG120408-01) by Tungaloy The SNGG120408-01 GH110 Tungaloy insert is an ISO‑format square turning insert designed for external and internal turning operations, offering a balanced mix of wear resistance and edge stability. Square ISO insert with 12 mm size GH110 Tungaloy grade for wear resistance 0.8 mm nose radius for general turning 0° rake and cylindrical hole for secure fit Increased process stability through a wear‑resistant grade The combination of a Tungaloy GH110 grade and carbide substrate provides a dependable balance between hardness and toughness, which translates into greater tool life and more consistent component quality. A wear‑resistant cutting material reduces the frequency of insert changes and stabilises dimensional results during longer production runs. The GH110 composition is optimised to support a secure cutting edge under typical turning stresses, emphasising productivity and reduced downtime. Reliable fit and predictable assembly for efficient machining Designed to the ISO indexing standard, the insert’s square form, 12 mm size, 4.76 mm thickness and 0.8 mm nose radius are clearly defined to ensure compatibility with matching external holders and boring bars. The presence of a cylindrical hole and the specified 0° rake require a compatible clamping arrangement; compatibility depends on match of form, clearance angle, tolerance class, fastening method, size and thickness. The insert is supplied under the manufacturer article number 6806529 and is identified as SKU 6806529-Tungaloy for traceability. Practical guidance for application and selection Intended for both external and internal turning, the indexable plate performs best when the chipbreaker and grade are chosen to suit the workpiece material, the machining method and machine stability. A conservative approach to cutting parameters at first contact will verify the combination of holder rigidity and chip control; thereafter, feeds and speeds can be increased to improve cycle time while maintaining surface quality. Regular inspection of the cutting edge and timely indexation contribute to consistent part finish and repeatability. Contact Metav Werkzeuge to request Tungaloy SNGG120408-01 inserts, technical advice and availability information at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 6806529 Manufacturer SKU: 6806529-Tungaloy ISO designation: SNGG120408-01 Facts Shape: square Size: 12 mm Thickness: 4.76 mm Nose radius: 0.8 mm Rake angle: 0° Hole: with cylindrical hole Special features Grade: GH110 (Tungaloy) Material: carbide Chipbreaker: 01 Model series: ISO turning indexable inserts Application: turning (external and internal) FAQ Which machining tasks is this insert designed for? This insert is designed for external and internal turning; the SNGG120408-01 GH110 Tungaloy insert is intended for general turning tasks where a balanced combination of wear resistance and edge stability is required. How is the insert mounted in the toolholder? Mounting requires a compatible ISO external holder or boring bar: the form, clearance angle, tolerance class, fastening method, size and thickness must match; the insert’s cylindrical hole and clamping geometry ensure secure retention. What are the key dimensions and geometry to check before purchase? Key data are 12 mm size, 4.76 mm thickness, 0.8 mm nose radius, square shape, 0° rake and a cylindrical hole; these dimensions should be checked against the intended holder and application. What does the GH110 grade mean in practice? The GH110 Tungaloy grade combines wear resistance, edge stability and sufficient toughness to deliver consistent cutting performance and extended tool life under standard turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 NS520 Wendeplatten - Tungaloy
Combine cermet finishing with ISO compatibility and a compact square geometry for stable, high-quality turning results; benefit from the NS520 grade's consistent wear and surface integrity and order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNGG 120408 NS520 Turning insert – square ISO cermet insert for turning, 0° relief – Tungaloy The SNGG120408-01 NS520 is an ISO-indexed square turning insert designed for finishing to light machining of steel, offering a small corner radius and a cermet cutting grade for superior surface quality. ISO square insert 12 mm size Cermet grade NS520 for finishing 0° relief for stable cutting engagement 0.8 mm corner radius for fine surface finish Delivering repeatable surface quality and dimensional control The NS520 cermet grade is engineered for finishing and light turning operations on steel, prioritising surface finish and dimensional accuracy. A cermet edge provides low built-up edge tendency and predictable wear, which maintains part tolerances over longer production runs. The combination of the small 0.8 mm corner radius and the low-relief geometry supports fine finishing passes that reduce secondary operations and rework. Selecting a cermet insert reduces variability in batch production and helps achieve consistent part presentation straight from the lathe. Designed for straightforward integration into ISO tool systems As an ISO indexable insert, the component integrates with standard square holders provided the form, relief angle, tolerance class, clamping style, size and thickness match. The insert’s square form and central cylindrical hole permit secure clamping and enable up to four usable cutting edges per index, which supports efficient tool rotation and stock management. Clear identification of the insert geometry simplifies tool changeover and lowers machine downtime in production environments, delivering measurable improvements in throughput and process stability. Process guidance for turning steel with the NS520 grade For finishing passes on steel, prefer moderate cutting speeds and light feeds to exploit the NS520 grade’s strength: excellent surface quality and even flank wear. The small corner radius is suited to fine profiles and tight tolerances; avoid aggressive depths of cut that would demand a more robust grade. The supplied chipbreaker 01 is matched to the intended light machining tasks—choose an alternative breaker if cutting conditions or material grades produce problematic chip forms. Stable workholding and correct tool overhang complement the insert’s properties and are decisive for repeatable, high-quality results. Contact Metav Werkzeuge for tailored recommendations on using the Tungaloy NS520 inserts in specific turning setups, or request application support via info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6806522 SKU: 6806522-Tungaloy Manufacturer SKU: TUN6806522 ISO designation: SNGG120408-01 Dimensions & geometry Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Shape: square Hole: with cylindrical hole Chipbreaker: 01 Materials & features Cutting grade: NS520 (cermet / coated cermet) Substrate material: carbide Intended use: turning Series: ISO turning indexable inserts FAQ What materials is this insert intended for? The NS520 grade is optimised for finishing to light machining of steel; the SNGG120408-01 is best applied where surface quality and dimensional control are priorities. How many cutting edges are available per insert? The square form of the SNGG120408-01 provides up to four indexable edges before replacement is required. Will this insert fit my existing ISO holder? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the insert follows ISO indexing standards for straightforward matching. Is this insert suitable for roughing operations? The NS520 cermet is formulated for finishing and light cuts; heavy roughing typically requires a tougher grade and a different chipbreaker geometry. What advantages does the NS520 cermet provide? NS520 offers improved surface finish, stable and even wear progression, and reliable dimensional results in finishing applications with steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 NS9530 Wendeplatten - Tungaloy
Compact finishing performance with a sharp cutting edge and a 0.8 mm corner radius ensures high surface quality and low cutting forces; combine these strengths with ISO compatibility to maintain steady production. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNGG120408-01 NS9530 ISO indexable turning insert by Tungaloy — finishing grade for turning The SNGG120408-01 NS9530 is a square ISO-format indexable insert designed for turning operations, optimised as a finishing grade for steel with a sharp edge, low cutting forces and excellent surface finish. ISO square insert SNGG120408-01 Uncoated cermet NS9530 finishing grade Sharp edge for low cutting forces 0.8 mm corner radius, 4.76 mm thickness Precision finishing tailored for steel turning The finishing-grade NS9530 composition delivers consistently low cutting forces and a sharp cutting edge, making it ideal for applications where surface integrity is critical. As an ISO-format indexable insert, the component supports controlled, continuous cuts and small depths of cut, which in turn reduces vibration and improves repeatability. The resulting benefit is fewer rework cycles and a predictable surface finish, measured in improved Ra values when compared with generic grades. The square geometry with a defined 90° cutting face contributes to dimensional control on external and internal turning operations. Clear compatibility and straightforward mounting Compatibility with toolholders depends on form, clearance, tolerance class, fastening method, size and thickness; the insert matches standard ISO turning holders when these parameters are observed. The design includes a cylindrical hole for secure clamping and a standard thickness of 4.76 mm, which simplifies inventory management across ISO systems. Technical clarity around these parameters reduces setup time at the machine and helps maintain stable tool projection, which is essential for finishing tasks where minimal deflection is required. Productivity gains through predictable tool behaviour By selecting a finishing-grade, uncoated cermet insert with 0.8 mm corner radius, the process benefits from low heat generation and consistent chip formation in steel applications, while the defined chipbreaker designation 01 supports manageable swarf control in continuous cuts. The combination of a sharp edge and the material characteristics of the grade reduces feed sensitivity and enables higher part-to-part consistency. For production environments aiming to raise first-pass yield and lower manual finishing effort, this insert provides a demonstrable improvement in throughput without compromising surface quality. For application advice on Tungaloy finishing inserts, technical selection or to purchase SNGG120408-01 NS9530 via Metav Werkzeuge, please contact Metav Werkzeuge GmbH by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored recommendations Technical data Article number: 6997808-Tungaloy Manufacturer SKU: TUN6997808 Model series: ISO-Drehwendeschneidplatten ISO designation: SNGG120408-01 Facts Corner radius: 0.8 mm Plate size: 12 mm Thickness: 4.76 mm Main angle: 90° Clearance angle: 0° Hole: cylindrical Special features Uncoated cermet grade NS9530 Finishing grade for steel Sharp cutting edge, low cutting forces Chipbreaker: 01 Square plate with hole, ISO-format Designed for continuous cuts and small depths of cut FAQ Which materials is this insert intended for? The grade NS9530 is an uncoated cermet finishing grade intended primarily for steel; the SNGG120408-01 insert is optimised for continuous cutting and small depths of cut where high surface finish is required. How is holder compatibility determined for this insert? Compatibility is determined by form, clearance (freiwinkel), tolerance class, fastening, size and thickness; the insert fits standard ISO turning holders that accept the SNGG120408-01 format and a 4.76 mm plate thickness. What chipbreaker and cutting style suit this insert? The insert carries chipbreaker designation 01 and is intended for finishing operations with continuous chips and small depths of cut to achieve stable chip flow and a fine surface finish. What are the key dimensional values to check before mounting? Key values are a 12 mm plate size, 4.76 mm thickness, 0.8 mm corner radius and a 90° plate angle; the hole is cylindrical for secure clamping. Is this insert suitable for roughing operations? No; the SNGG120408-01 NS9530 is a finishing-grade insert designed for low cutting forces and high surface quality rather than the heavy material removal typical of roughing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 cermet finishing grade and the 0.8 mm corner radius to achieve consistently high surface quality and lower cutting forces; the ISO conformity of the plate ensures straightforward integration into existing tooling systems. Order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. SNGG 120408 NS9530 turning insert (square, 0° relief) – Tungaloy The SNGG120408-01 NS9530 is a square ISO turning insert designed for finishing operations on steel, combining a sharp cermet cutting edge with a 0° relief for stable continuous cuts. Precision cermet finishing grade NS9530 Square insert with 0.8 mm corner radius 0° relief for dependable continuous turning Cylindrical hole for secure ISO clamping Achieve superior finishes with a cermet finishing grade The insert uses the NS9530 uncoated cermet grade, created for finishing steel with a sharp cutting edge that reduces cutting forces and promotes a high surface finish. Cermet combines ceramic hardness with metal toughness, which means the edge remains sharp under continuous turning and small depths of cut. For machining operations where surface integrity and repeatability matter, this material grade helps reduce secondary finishing and rework, improving throughput without sacrificing part quality. Stable geometry and secure clamping for consistent results A square plate geometry with a 0.8 mm corner radius and 0° relief provides a predictable engagement with the workpiece, limiting vibration and ensuring repeatable contact geometry. The insert is supplied with a cylindrical hole, supporting secure ISO-standard clamping on compatible holders and boring bars; correct seating and fastening reduce micro-movements that shorten tool life. The ISO standard designation simplifies tool inventory and makes it easier to match the plate to approved holders and clamping sets for reliable production runs. Easy system integration and productivity benefits Designed as part of an ISO insert system, the plate integrates with a matching external holder, shim/clamping set and replacement screws to form a complete turning system. Using a finishing-grade insert such as this reduces cycle time by permitting higher feed rates for the same surface quality compared with general-purpose grades, and it lowers the need for subsequent polishing. The clear specification and ISO conformity also aid process planning and tool management, supporting cost-effective production and predictable component tolerances. For application guidance or to secure supply of Tungaloy finishing inserts through Metav Werkzeuge, please contact Metav Werkzeuge’s technical advisors at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6997817 Manufacturer SKU: TUN6997817 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts Plate designation: SNGG120408-01 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Hole: with cylindrical hole Insert angle: 90° Special features Material: cemented carbide and uncoated cermet grade NS9530 Application: turning (finishing) Breaker style: 01 ISO-compliant indexable insert Compatibility depends on holder form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? This SNGG120408-01 NS9530 Tungaloy insert is specified as a finishing grade for steel and is optimised for continuous turning and small depths of cut. How does the NS9530 cermet grade affect performance? The NS9530 cermet in the Tungaloy turning insert provides a sharp edge and good wear resistance, which improves surface finish and reduces cutting forces during finishing operations. Is the SNGG 120408 compatible with ISO holders? Yes, the plate uses an ISO-compliant form and a cylindrical hole for secure clamping; compatibility with a specific holder is determined by matching form, relief, tolerance and fastening. What cutting style suits the insert best? The insert is designed for finishing cuts and continuous turning where low cutting forces and high surface quality are required. Can the insert be used for interrupted cuts? The finishing geometry and sharp cermet edge are optimised for continuous cuts; interrupted cutting may reduce edge life compared with continuous operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade cermet and a compact square form that deliver low cutting forces and superior surface finish for steel turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and process parameters. SNGG 120408 NS9530 — Tungaloy indexable turning insert, square 12 mm, 0° clearance The SNGG120408-01 NS9530 is an ISO-format square indexable insert for turning, designed as a finishing grade for steel that prioritises surface quality and low cutting forces. Square 12 mm format, robust seating NS9530 uncoated cermet for finishing 0° clearance for sharp edge action Cylindrical hole for secure clamping Achieve superior surface quality with a finishing cermet The combination of an uncoated cermet grade and a sharp cutting geometry gives a measurable advantage when finishing steel components. The NS9530 grade is formulated for continuous cuts and small depths of cut, reducing the tendency for built-up edge and enabling consistently low cutting forces. That translates into improved part finish and fewer downstream grinding or polishing steps. For shops aiming to raise first-pass quality, this finishing insert supports predictable surface integrity with minimal compromise to cycle time. ISO compatibility and secure clamping reduce setup time Supplied in an ISO-design format, the insert is compatible with standard indexable turning holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The square 12 mm plate size, 4.76 mm thickness and 0.8 mm corner radius ensure stable seating and repeatable positioning; the cylindrical hole enables secure clamping and simple replacement. Clear identification of these dimensions helps to select the correct external holder and reduces machine downtime caused by trial-and-error fitting, improving process reliability across batches. Predictable finishing performance and efficient machining As a dedicated finishing grade with chipbreaker 01, the geometry is tuned to produce short, controllable chips and an even cutting load at small depths. This yields consistent part-to-part results and reduces scrap rates in serial production. The cemented carbide substrate offers robust edge support for the fine cutting edge, producing high-quality surfaces while keeping cutting forces low; the result is an efficient balance between tool life and finish quality that supports profitable batch machining of steel components. For expert advice on integrating genuine Tungaloy finishing inserts into existing turning systems, contact Metav Werkzeuge for holder compatibility and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997816 SKU: 6997816-Tungaloy Manufacturer SKU: TUN6997816 Model series: ISO indexable turning inserts Material: cemented carbide Facts Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Special features ISO designation: SNGG120408-01 Grade: NS9530 (uncoated cermet) Plate shape: square Hole: with cylindrical hole Chipbreaker: 01 Application: Turning FAQ What steels is this finishing grade best suited to? The NS9530 cermet grade is optimised for finishing operations on steel; the SNGG120408-01 insert is intended where low cutting forces and high surface quality are required. How does the 0° clearance affect cutting behaviour? A 0° clearance produces a very sharp edge action that lowers cutting forces and promotes a fine surface finish; the trade-off is that correct holder geometry and rigidity must be ensured for stable performance. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; the ISO-format designation SNGG120408-01 guides selection of a matching external holder. What is the role of chipbreaker 01 on this insert? Chipbreaker 01 is designed for finishing conditions, producing short, controllable chips and maintaining an even cutting load under small depths of cut. How does the uncoated cermet grade influence tool life and finish? The uncoated cermet NS9530 supports a very sharp cutting edge and reduced built-up edge formation, improving surface finish; tool life is optimised for finishing cycles rather than heavy roughing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing performance and consistent indexability thanks to the combination of the NS9530 cermet grade and the square ISO geometry; reliable clamping with a cylindrical hole and a 0° clearance angle ensures repeatable results on external and internal turning operations. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. SNGG 120408 NS9530 indexable turning insert for turning by Tungaloy the SNGG120408-01 NS9530 indexable turning insert designed for finishing steel in external and internal turning, featuring a square geometry and a cylindrical hole for secure clamping ISO‑standard square insert NS9530 cermet for superior surface finish Sharp edge for low cutting forces Suitable for continuous cutting and small depths Precision geometry for stable, repeatable clamping The ISO‑standard square geometry with a cylindrical hole provides a secure and repeatable seating in compatible toolholders. The design conforms to ISO series requirements, so compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; this ensures predictable positioning and minimal movement under cutting forces. The 4.76 mm thickness and the square form give the insert rigidity during finishing cuts, reducing vibration and improving dimensional consistency. NS9530 cermet grade delivers high surface quality The NS9530 uncoated cermet grade is optimised for finishing operations in steel, combining a sharp cutting edge with excellent wear resistance to produce a high surface finish. The material composition offers low cutting forces and reliable edge integrity during continuous cutting and small depths of cut, which reduces the need for secondary finishing. For applications where a fine surface and minimal burr formation are priorities, this grade provides tangible productivity benefits. Application guidance and tooling choices for best results Selection of the correct chipbreaker and holder is essential: the insert is supplied with chipbreaker 01 and a corner radius of 0.8 mm, attributes that support smooth chip formation in finishing passes. The listed 0° clearance angle suits specific holder geometries and should be matched by the external or boring bar assembly to ensure the intended effective rake and contact conditions. Where stability is limited, prioritise rigid clamping and minimal overhang to maintain the sharp edge and consistent performance. Production advantages and process reliability Incorporating this insert into finishing operations results in lower rework rates and predictable tool life, translating into fewer stoppages and better throughput. The ISO coding and standard dimensions make stock management straightforward, while the combination of the NS9530 cermet and the square form supports consistent surface quality across batches. For machining centres and turning shops seeking repeatable finishing performance, the component contributes to stable, economic production. Contact Metav Werkzeuge for matching holders, technical data and to order the Tungaloy SNGG120408-01 NS9530 insert for precision finishing; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6997815 SKU: 6997815-Tungaloy Manufacturer SKU: TUN6997815 ISO designation: SNGG120408-01 Numbers / Core technical data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Geometry angle: 90° Hole: with cylindrical hole Special features / Designs Grade: NS9530 (uncoated cermet) Material: carbide Form: square insert Chipbreaker: 01 Series: ISO turning inserts Application: turning FAQ Is this insert suitable for finishing steel components? The SNGG120408-01 NS9530 insert is a finishing grade specifically formulated for steel; the NS9530 cermet provides a sharp edge and low cutting forces to achieve a high surface finish. Which holder details must be matched for correct fitment? Compatibility is determined by holder form, clearance angle, tolerance class, fixing method, insert size and thickness; ensure the toolholder accepts the SNGG120408-01 ISO geometry and accommodates a 12 mm square insert with a cylindrical hole. Can the insert be used for internal turning as well as external turning? Yes, the insert is intended for both external and internal turning applications, provided a suitable boring bar or internal holder that matches the 0° clearance and square geometry is used. What cutting conditions is the insert optimised for? The NS9530 cermet grade and chipbreaker 01 are optimised for continuous cutting and small depths of cut typical of finishing operations, where surface quality and low cutting forces are required. Which product identifiers should be referenced when ordering or specifying the insert? Reference the ISO designation SNGG120408-01, manufacturer article number 6997815 and SKU 6997815-Tungaloy when ordering or specifying this Tungaloy indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet grade, an ISO-standard square form and reliable hole clamping for consistent finishing results; these features support stable production and long tool life. Order the SNGG120408-01 NS9530 indexable insert directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. SNGG 120408 NS9530 — Indexable turning insert (square, with hole) by Tungaloy The SNGG120408-01 NS9530 is an ISO-standard square indexable insert designed for external and internal turning, offering a finishing cermet grade for low cutting forces and superior surface quality. ISO square insert, 12 mm size Uncoated cermet NS9530 finishing grade 0° rake angle and 0.8 mm corner radius Cylindrical hole for secure clamp mounting Achieve consistently finer surfaces with a finishing cermet The choice of an uncoated cermet grade such as NS9530 yields a sharp cutting edge and reduced built-up edge during continuous turning of steel, which translates into high surface finish and lower secondary operations. The material behaviour of cermet promotes small, regular chips and low cutting forces; this is especially valuable for small depths of cut and finishing passes where dimensional accuracy and surface integrity are decisive. Selecting a finishing grade aligned to the workpiece material reduces rework and contributes to predictable cycle times. Compatibility and secure clamping reduce setup variability The insert follows ISO-standard geometry, so compatibility with clamping systems is governed by form, clearance, tolerance class, fastening and thickness. The square shape with a cylindrical hole provides repeatable seating and stable location under radial loading, improving toolholder rigidity. With a nominal 12 mm size and a plate thickness of 4.76 mm, the insert suits standard external holders and boring bars designed for ISO SNGG types. The consistent interface and secure fixing reduce vibration and contribute to tool life stability across batches. Practical benefits on the shopfloor: handling, indexing and process security A 0.8 mm corner radius offers a compromise between edge strength and fine contouring capability, while the 0° rake angle supports low cutting forces during finishing actions on steel. The insert’s with hole configuration simplifies replacement and torque control at mounting, decreasing downtime during index changes. For process planners, this means fewer adjustments, steadier feeds and the potential to tighten tolerances without compromising productivity. Advice on matching the NS9530 grade to holder geometry and machining parameters is available to ensure optimal results. For finishing-focused turning operations, contact Metav Werkzeuge for tailored advice on using the Tungaloy NS9530 insert and secure the SNGG 120408 NS9530 for reliable, high-quality steel machining. Technical data Article number: 6997818 SKU: 6997818-Tungaloy Manufacturer SKU: TUN6997818 Manufacturer: Tungaloy Numbers / Core technical data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Rake angle: 0° Included angle: 90° Hole: with hole (cylindrical) Special features / Versions Grade: NS9530 (uncoated cermet) Application: turning (external and internal) Plate form: square Chipbreaker: 01 (finishing style) Designed for continuous cut and small depths of cut FAQ What materials is this insert optimised for? The SNGG120408-01 NS9530 insert is a finishing cermet grade optimised for steel turning operations, providing low cutting forces and improved surface quality. Can this ISO insert be used in standard SNGG holders? Yes, the ISO-standard geometry of the SNGG series ensures compatibility with standard SNGG holders when form, clearance and fastening match the insert dimensions. How does the 0.8 mm corner radius affect finish and tool life? A 0.8 mm corner radius balances edge strength and surface finish: it supports fine surface quality while offering sufficient robustness for finishing passes. Is the NS9530 grade coated or uncoated? The NS9530 grade is specified as an uncoated cermet, chosen for its sharp cutting edge and consistent finishing performance on steel. What is the benefit of the cylindrical hole design? The cylindrical hole facilitates secure clamping and repeatable seating, reducing setup variability and improving process stability during indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of the TH10 uncoated carbide grade and the 0.8 mm corner radius for low cutting forces and consistently fine surface finish; the ISO conformity ensures straightforward holder compatibility. Order the insert directly via Metav Werkzeuge or consult our specialists for selection and application advice. SNGG120408-01 SNGG 120408 TH10 — ISO turning insert (square, 90°) by Tungaloy The SNGG120408-01 is an ISO‑standard indexable insert for precision external and internal turning, tailored for non‑ferrous materials and operations requiring low cutting forces and clean surfaces ISO‑standard square insert, 90° included angle Uncoated carbide grade TH10 for non‑ferrous metals 0.8 mm corner radius for fine surface finish Cylindrical hole for secure fastening Consistent cutting with low forces and fine finishes The indexable insert provides reliable cutting performance thanks to the uncoated cemented carbide composition and the TH10 material grade. The combination of a sharp, uncoated cutting edge and the selected carbide substrate reduces cutting resistance, which results in lower machine loads and improved machining stability. For applications such as aluminium, brass and similar non‑ferrous alloys, this geometry supports clean surface finishes and easier downstream processing. The characteristic of producing lower cutting forces also helps when machining on less rigid set‑ups, maintaining tolerances and reducing rework. Straightforward compatibility with ISO holders for efficient setup Compatibility with a toolholder is determined by the insert’s form, relief angle, tolerance class, attachment method, size and thickness. This ISO‑compliant plate uses the standard dimensions and a cylindrical fastening hole to ensure predictable fitment in a wide range of external holders and boring bars. The standardisation shortens set‑up time and reduces inventory complexity because the plate is compatible with holders that accept the SNGG geometry and the specified thickness. Clear identification of the insert series and dimensions enables quick matching to the correct clamping parts and replacement screws. Geometry designed for surface quality and chip behaviour The square plate geometry with a 90° included angle and a 0.8 mm corner radius balances edge strength and surface quality. The modest corner radius aids chip formation and supports smoother transitions on stepped or interrupted cuts, while limiting the risk of raised edges. The chipbreaker designation and the plate’s form guide chip flow to enhance evacuation when working with ductile, non‑ferrous materials. In practice, this means fewer built‑up edges on the tool, a more consistent finish on the workpiece and extended effective tool life in appropriate conditions. Recommended applications and practical benefits Designed for general turning and internal operations, the insert is especially suited to jobs where low cutting force and fine finish are priorities. Use the plate for finishing passes on aluminium components, light alloys and certain plastics where the uncoated cutting edge delivers reduced tendency for material adhesion. When assessing suitability, consider workpiece rigidity and the chosen holder: the plate performs best when matched to a stable clamping arrangement and cutting parameters adjusted for non‑ferrous machining. Choosing this insert supports reproducible results and efficient production cycles. Contact Metav Werkzeuge for tailored advice on the SNGG120408-01 TH10 insert and to arrange supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Item number: 6806536 Manufacturer article number: 6806536 Manufacturer SKU: TUN6806536 Stock SKU: 6806536-Tungaloy Model series: ISO turning inserts Designation: SNGG120408-01 TH10 Tungaloy insert Facts Plate size (inscribed circle): 12 mm Corner radius: 0.8 mm Plate thickness: 4.76 mm Relief (clearance) angle: 0° Included angle: 90° Hole: with cylindrical hole Chipbreaker: 01 Special features Uncoated cemented carbide, grade TH10 ISO‑standard indexable insert for turning Square plate form for 90° turning operations Compatible with holders by form, relief angle, tolerance class, fastening, size and thickness Suited for non‑ferrous materials and low cutting force applications FAQ What materials is this insert best suited for? The SNGG120408-01 TH10 indexable insert from Tungaloy is optimised for non‑ferrous materials such as aluminium and brass, and for applications where an uncoated edge reduces adhesion and cutting forces. How is compatibility with existing holders determined? Compatibility depends on the insert’s form, relief angle, tolerance class, fastening, size and thickness; ensure the holder accepts the SNGG form and the specified 12 mm inscribed circle and 4.76 mm thickness. What does the 0.8 mm corner radius mean for finishing? A 0.8 mm corner radius balances edge strength and surface quality, improving finish on external and internal turning while aiding chip control on ductile materials. Is the insert coated? No, this grade is uncoated cemented carbide (TH10), chosen to keep cutting forces low and reduce tendency for material adhesion in non‑ferrous machining. Can this insert be used for roughing as well as finishing? The geometry and modest corner radius are primarily suited to finishing and medium cuts where surface quality and low cutting force are required; for heavy roughing a larger radius or different grade may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGG 120408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a sharp TH10 uncoated carbide grade and a precise 0.8 mm corner radius for stable, low-force turning with clean surface finishes; order the SNGG120408-01 directly via Metav Werkzeuge or consult our specialists for process matching and availability. SNGG 120408 TH10 square ISO turning insert — Tungaloy A SNGG120408-01 TH10 indexable insert designed for ISO-compliant external and internal turning applications. ISO 120408 format, square insert Uncoated carbide TH10 for low cutting forces 0.8 mm nose radius for precise profiling Cylindrical hole for secure clamping High-efficiency turning with consistent chip control The SNGG120408-01 is built to deliver repeatable results in turning operations where low cutting forces and clean surfaces are priorities. The TH10 grade is an uncoated carbide developed as a sharp universal grade suitable for non-ferrous materials and similar applications; this translates into reduced power draw and a lower tendency for built-up edge when machining brass, aluminium and softer alloys. The square geometry and standardised ISO designation ensure predictable engagement angles, while the modest corner radius supports dimensional control without compromising edge life. Secure seating and straightforward compatibility Compatibility with toolholders is determined by the insert’s form, relief angle, tolerance class, clamping arrangement, size and thickness. The square insert format, cylindrical hole, and a nominal thickness of 4.76 mm enable reliable clamping in matched ISO holders and turning bars. For shops standardising on ISO inserts, this plate offers straightforward interchangeability; correct selection of the clamping set and seat ensures repeatable zero points and minimises set-up time, improving overall process stability and throughput. Material behaviour and surface-quality advantages Being uncoated cemented carbide, the grade relies on a sharp cutting edge rather than a sacrificial coating, which benefits operations that favour low-friction metal removal and reduced smear on softer alloys. The 0.8 mm corner radius is a compromise between edge strength and surface finish capability, supporting fine profile work and finish turning. When paired with an appropriate chipbreaker 01 and suitable cutting parameters, the insert produces consistent chips and helps maintain machine tool efficiency and component quality. Application guidance for maximum productivity Intended for both external and internal turning, the insert performs best when the chosen chipbreaker and grade match the workpiece material, machining type and rigidity of the set-up. The ISO-standard format reduces tooling complexity and simplifies inventory management, while the 90° lead/approach geometry suits a wide range of facing and shoulder operations. Selecting this type of insert can shorten cycle times and reduce the need for frequent tool changes, thereby contributing to a more productive machining cell. For reliable, low-force turning with Tungaloy’s TH10 grade, contact Metav Werkzeuge for stock status, tailored holder recommendations and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806530 Manufacturer SKU: TUN6806530 SKU: 6806530-Tungaloy Model series: ISO turning indexable inserts Designation: SNGG120408-01 Core dimensions Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Lead angle: 90° Features & materials Shape: square Grade: TH10 Cutting material: uncoated carbide Chipbreaker: 01 Hole style: cylindrical hole Application: Turning Compatibility note: ISO standard — check holder form, tolerance class and clamping FAQ Which materials is this insert best suited for? The SNGG120408-01 TH10 insert is optimised for non-ferrous alloys and applications where an uncoated carbide edge delivers lower cutting forces and cleaner surfaces; it performs well on aluminium, brass and similar materials. How is holder compatibility determined? Compatibility depends on the holder form, relief angle, tolerance class, clamping arrangement, size and thickness; the ISO 120408 format of this insert simplifies selection for matching ISO toolholders. What corner radius is fitted and what is it good for? This insert has a 0.8 mm corner radius, which balances edge strength with the capacity for precise profiling and finish turning in a variety of turning tasks. Is the cutting edge coated? No — the TH10 grade is an uncoated cemented carbide; the sharp edge is designed to minimise cutting forces and reduce built-up edge in suitable materials. Can you confirm the item designation and article number? The plate is designated SNGG120408-01 TH10, article number 6806530, listed under SKU 6806530-Tungaloy for order and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com