SNGG 120408 X407 Wendeplatten - Tungaloy
Take advantage of the combination of precise 0.8 mm corner radius, robust Tungaloy X407 carbide grade and ISO‑compliant geometry for consistent turning results; order directly via Metav Werkzeuge or contact our specialists for application advice. SNGG 120408 X407 — Tungaloy indexable insert for turning (ISO 120408) The SNGG120408-01 X407 is a square ISO‑compliant indexable insert engineered for external and internal turning, offering a balanced mix of wear resistance and edge stability. ISO‑compliant square geometry Grade X407 for wear resistance 0.8 mm corner radius for fine turning Cylindrical hole for secure clamping Consistent cutting performance for higher productivity The insert is made from carbide and specified in Grade X407, a Tungaloy development that balances wear resistance and toughness to maintain a stable cutting edge over extended runs. With a 0.8 mm corner radius and a 90° included angle, the geometry supports repeatable dimensional control during face and profile turning. The combination of the material and geometry reduces unexpected tool changes and contributes to a predictable tool life, which makes process planning and cycle-time calculations more reliable for production environments. Compatibility that simplifies toolholder selection This ISO indexable format follows the ISO 120408 designation and is compatible with holders that match form, relief angle, tolerance class, fastening style, size and thickness. The square format and the cylindrical hole ensure positive mechanical location and secure clamping in suitable external holders or boring bars. The 4.76 mm plate thickness and 12 mm size are standard dimensions that ease inventory management and replacement logistics. Selecting the correct chipbreaker 01 and matching the insert grade to the workpiece material delivers improved chip control and surface finish without overcomplicating fixture choice. Practical guidance for selection and process reliability For turning applications, consider the workpiece material and required stability when choosing this insert: Grade X407 is designed to complement the insert geometry with a focus on edge integrity under moderate to demanding conditions. The 0° relief angle supports general turning operations, while the chipbreaker 01 is intended for effective chip formation in a range of steels and mixed materials. If further specification is needed—for example, optimising feed and speed for a particular alloy—our team can provide tailored recommendations to ensure the insert delivers consistent component quality and minimal downtime. Contact Metav Werkzeuge for availability of the SNGG120408-01 X407 Tungaloy insert, tailored application advice or to request delivery times via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806527 Manufacturer SKU: TUN6806527 Model series: ISO‑Drehwendeschneidplatten Application: Turning SKU: 6806527‑Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Included angle: 90° Relief angle: 0° Special features Material: carbide Grade: X407 (Tungaloy) ISO designation: 120408 Shape: square Hole: cylindrical hole Chipbreaker: 01 Suitable for external and internal turning FAQ What work is this insert intended for? The SNGG120408-01 X407 Tungaloy indexable insert is intended primarily for external and internal turning; it is supplied in a square ISO format suitable for a wide range of turning tasks. Which materials suit Grade X407 best? Grade X407 provides a balanced combination of wear resistance and toughness, making the insert appropriate for a broad coverage of steels and mixed materials where edge stability and consistent tool life are required. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius offers a compromise between strength and finishing capability: it improves edge robustness compared with smaller radii while still enabling fine surface quality on turned components. Is the insert compatible with standard ISO holders? Yes—the ISO designation and the cylindrical hole allow this insert to be mounted in holders that match the form, size, fastening and tolerance requirements described by the ISO system. What does chipbreaker 01 mean for chip control? Chipbreaker 01 is engineered to produce controlled chips for typical turning operations; when combined with the X407 grade and correct cutting parameters it supports safe evacuation and improved surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 090308 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of LX10 wear resistance and precise 90° geometry for stable, repeatable turning processes; compatibility with ISO holders ensures straightforward integration into existing tool systems. Order or request application advice directly via Metav Werkzeuge for rapid availability and consultancy. SNGN 090308 LX10 — ISO turning insert with 90° geometry by Tungaloy A SNGN 090308 LX10 ISO turning insert designed for efficient external and internal turning, featuring a square form and robust carbide construction. ISO-compatible square insert LX10 carbide grade for wear resistance 0.8 mm corner radius for robust edges 90° main cutting edge for accurate profiling Predictable cutting performance from precise geometry The square plate and 90° geometry deliver consistent contact conditions, which helps stabilise cutting forces during both external and internal turning. Compatibility with ISO holders is governed by form, free angle, tolerance class, clamping and plate thickness, and these parameters are standardised to simplify selection and replacement. The result is reduced setup time and more predictable dimensional outcomes when a matched holder and clamping set are used. Extended component life through the LX10 carbide grade The insert uses a Tungaloy LX10 carbide grade developed for turning, balancing wear resistance and edge toughness to maintain a stable cutting edge under typical production loads. This composition supports longer tool life and sustained surface quality, especially in general-purpose turning. Where increased abrasion resistance is required, the grade’s properties provide an economical compromise between durability and cutting stability. Practical integration and handling in workshop environments With a plate thickness of 3.18 mm and a corner radius of 0.8 mm, the insert is sized for reliable clamping and consistent repeatability. The design is supplied without a chipbreaker and without a hole, so selection of the correct holder and clamping set is essential for secure fixation and chip control. The ISO system approach—insert, compatible outer holder or boring bar, shim/clamping set and replacement screws—permits quick changeovers and keeps machine downtime to a minimum. For proven process reliability with Tungaloy LX10 inserts, contact Metav Werkzeuge for stock status and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852106 SKU: 6852106-Tungaloy Manufacturer SKU: TUN6852106 Brand: Tungaloy Model series: ISO turning inserts Material: Carbide Facts Angle: 90° Corner radius: 0.8 mm Plate thickness: 3.18 mm Plate size: 09 Free angle: 0° Plate form: square Special features Insert designation: SNGN090308 Grade: LX10 Chipbreaker: none Hole: none Intended use: Turning Typical system: ISO insert plus matching holder and clamping set FAQ What materials is this insert suited for? The LX10 grade is formulated for general turning tasks; the SNGN 090308 LX10 Tungaloy turning insert (SKU: 6852106-Tungaloy) is suitable for a broad range of workpiece materials when the correct geometry and cutting data are selected. How is compatibility with holders determined? Compatibility is determined by insert form, free angle, tolerance class, clamping method, size and thickness; the ISO-standard SNGN090308 designation indicates match to ISO square insert holders. Can this insert be used for internal turning? Yes, the square geometry and 90° main cutting edge make the insert appropriate for both external and internal turning applications when paired with a suitable boring bar or internal holder. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker; chip control must be achieved via holder geometry, cutting parameters or by selecting an insert variant with an integrated breaker if required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 090308 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, robust LX11 carbide grade, and precise dimensions for reliable turning operations; order the indexable insert directly via Metav Werkzeuge or consult our specialists for holder compatibility. SNGN 090308 LX11 — Tungaloy indexable turning insert (square 90°) The SNGN 090308 LX11 is an ISO‑standard indexable insert for external and internal turning, engineered to deliver a balanced mix of wear resistance and edge stability for productive machining. ISO-cutting insert SNGN 090308 LX11 Carbide grade Tungaloy LX11 for turning 0.8 mm corner radius for robust edges Square 90° geometry, thickness 3.18 mm Consistent tool life through a balanced carbide grade The LX11 grade combines wear resistance and toughness, giving the insert a stable cutting edge that withstands interrupted cuts and variable loading. As a result, process variance is reduced and the need for frequent indexing is minimised. The substrate and grade selection are oriented towards repeatable performance in turning applications; operators benefit from longer tool life and fewer unplanned tool changes, which supports steady cycle times and predictable production planning. Geometry that controls finish and edge strength The square 90° form with a 0.8 mm corner radius and 3.18 mm plate thickness provides a compromise between edge strength and surface finish. A larger corner radius increases edge robustness and resistance to chipping, while the moderate radius here still permits fine surface integrity on external and internal profiles. The 0° clearance angle is specified on the insert and influences contact conditions between workpiece and tool; it is essential to match this with the appropriate holder geometry to achieve the expected cutting engagement and surface result. ISO compatibility for straightforward system integration Supplied as an ISO-standard turning insert, compatibility with a chosen holder depends on form, clearance, tolerance class, fastening method, size and thickness. The insert is supplied without a hole, which must be considered when selecting a clamping system or cutter body. Standardisation simplifies stock management: matching ISO designation, size and tolerance class ensures secure mounting, correct seating and reliable repeatability across batches and machines. Practical recommendations for process setup For reliable use, pair the insert with a suitable holder and select a chipbreaker or an alternative grade tailored to the workpiece and cutting conditions; the current item is supplied without a chipbreaker so selection should reflect the material and feed strategy. The insert’s properties support both roughing and finishing steps when cutting parameters and coolant strategy are optimised. Where interrupted cuts occur, the combination of geometry and LX11 composition improves resilience and reduces edge breakdown, contributing to sustained productivity. Contact Metav Werkzeuge for tailored selection advice on Tungaloy LX11 indexable inserts and compatibility checks; consultation and stocking options are available via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6806550 Manufacturer SKU: TUN6806550 Label: SNGN090308 LX11 Tungaloy indexable insert Facts Corner radius: 0.8 mm Insert size: 09 Thickness: 3.18 mm Clearance angle: 0° Shape: square (90°) Special features Material: cemented carbide Grade: LX11 (Tungaloy) Mounting: without hole Application: external and internal turning Compatibility determined by form, clearance, tolerance, fastening and size FAQ What materials is this insert suitable for? The SNGN 090308 LX11 insert, made in the Tungaloy LX11 grade, is intended for turning tasks where a balance of wear resistance and toughness is required; the grade supports a broad range of machining situations when combined with an appropriate chipbreaker and parameter set. Can the insert be used for internal turning as well as external turning? Yes, the ISO-form SNGN 090308 LX11 is suitable for both external and internal turning operations provided the selected holder and tool overhang match the required clearance and engagement. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius strengthens the cutting edge against chipping and improves tool life under variable loads, while still allowing acceptable surface finish for most turning cycles when feeds and speeds are adjusted accordingly. Is a chipbreaker included with this insert? This insert is supplied without a chipbreaker; selection of a suitable chip control solution or a different variant should be based on workpiece material, cutting parameters and the intended operation. How is compatibility with cutter holders ensured? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; verify these parameters against the holder specification or consult Metav Werkzeuge for compatibility guidance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120304 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a balanced LX10 carbide grade and a compact 0.4 mm nose radius for reliable, repeatable turning operations. Order the insert directly via Metav Werkzeuge or consult our team for application-specific recommendations. SNGN120304 LX10 Tungaloy insert — ISO turning insert with 90° square geometry and 0.4 mm nose radius by Tungaloy The SNGN120304 LX10 Tungaloy insert is an ISO‑standard, square carbide indexable plate designed for external and internal turning, offering a precise 90° cutting edge and a balanced grade for wear resistance and edge stability. ISO SNGN square form, 90° geometry LX10 carbide grade for balanced wear and toughness 0.4 mm nose radius for fine surface finish Compatible with ISO turning holders and boring bars Consistent geometry for predictable set‑ups and minimal rework The ISO designation and square 90° form enable rapid identification and straightforward integration into standard turning systems. With a nominal size of 12 mm and a plate thickness of 3.18 mm, the insert delivers a stable reference for clamping and repeatable tool offsets. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; recognising these parameters simplifies tool selection and reduces setup time, translating into fewer scrapped parts and steadier cycle times. The long flank ensures reliable engagement in axial and radial cuts, making the component suitable for a wide range of turning tasks. Balanced cutting performance through a specialised carbide grade The LX10 grade from Tungaloy combines wear resistance and toughness to support consistent edge life without sacrificing chip control in typical turning operations. This grade augments the geometry to provide the necessary compromise between abrasive wear and notch resistance, which is particularly beneficial during mixed or interrupted cuts. As a result, operators can expect improved tool life and stable cutting-edge behaviour, helping to maintain dimensional accuracy and surface quality over longer production runs. Efficient handling, fast indexing and clear identification Supplied as an ISO indexable plate without a central hole and without an integrated chipbreaker, the insert fits a wide range of clamping systems and is straightforward to replace or rotate during maintenance intervals. The compact nose radius of 0.4 mm supports fine finishing passes while preserving edge strength for roughing steps. Identification is simple: article number 6852107 and manufacturer SKU TUN6852107 ensure correct reordering and traceability in tool lists. As part of an ISO plate system, pairing the insert with a suitable external holder or boring bar plus the correct seat and clamp guarantees safe fixation and predictable cutting performance. Contact Metav Werkzeuge for tailored application advice on the SNGN120304 LX10 Tungaloy insert, availability checks or recommendations by calling +49 2822 7131930 or emailing info@metav-werkzeuge.com Technical data Article number: 6852107 Manufacturer SKU: TUN6852107 Designation: SNGN120304 Grade: LX10 Material: Cemented carbide Geometry: Square, 90° Nose radius: 0.4 mm Thickness: 3.18 mm Size: 12 mm Relief angle: 0° Hole: without hole Chipbreaker: without Facts Model series: ISO turning indexable plates Intended use: Turning (external and internal) Manufacturer: Tungaloy SKU / item reference present ISO standardised dimensions Special features Tungaloy carbide grade LX10 for balanced wear/toughness ISO conformity simplifies holder matching No central hole for certain clamping concepts Compact 0.4 mm radius for fine finishing System build: insert + external holder/boring bar + seat/clamp + replacement screws FAQ What holder types are compatible with this insert? Compatibility depends on the holder form, relief angle, tolerance class, fastening method, size and thickness; the SNGN120304 LX10 insert fits holders designed for ISO SNGN plates and standard external turning holders and boring bars. Is the LX10 grade suitable for interrupted cuts? Yes, the LX10 grade from Tungaloy provides a balance of wear resistance and toughness, which supports edge stability during interrupted or mixed cutting conditions. Does this insert include a chipbreaker? The insert is supplied without a chipbreaker; select an appropriate chip control solution or holder design according to the workpiece material and machining strategy. What are the key dimensions to check when replacing an insert? Verify plate size (12 mm), thickness (3.18 mm), nose radius (0.4 mm) and relief angle (0°) to ensure proper seating and correct tool offsets for repeatable machining. How can the product be identified for reordering? Use article number 6852107 or manufacturer SKU TUN6852107 when reordering to ensure the correct ISO SNGN120304 LX10 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120304 LX11 Wendeplatten - Tungaloy
The SNGN120304 LX11 insert combines ISO-standard geometry, a Tungaloy LX11 carbide grade and a compact 0.4 mm corner radius to deliver stable cutting performance in turning operations; its square 12 mm form and 3.18 mm thickness suit standard ISO holders. Order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. SNGN 120304 LX11 – ISO turning insert for external and internal turning (Tungaloy) The SNGN120304 LX11 is an ISO-standard carbide turning insert designed for precision external and internal turning where wear resistance and edge stability are required. ISO SNGN geometry for standardised holders Tungaloy LX11 grade for balanced wear resistance Square 12 mm insert with 0.4 mm corner radius 3.18 mm thickness compatible with 90° cutting angle Consistent metal‑cutting performance for repeatable results The insert is built on an ISO-standard SNGN geometry, which ensures predictable toolpath behaviour and simple interchangeability across compatible toolholders. The combination of carbide substrate and the LX11 grade balances wear resistance and toughness, reducing edge chipping in interrupted cuts while maintaining a stable cutting edge for continuous turning. For production environments this translates into fewer indexings, longer tool life and more consistent component dimensions. Clear compatibility and secure clamping reduce downtime Compatibility with a toolholder depends on form, relief angle, tolerance class, fixing method, size and thickness; the square 12 mm format and 3.18 mm plate thickness match standard ISO SNGN holders. The insert is supplied without a central hole and without a chipbreaker, so the correct clamping shim or clamp set and the recommended screw must be used to secure the insert. Proper seating and torque ensure repeatable positioning and help maintain surface finish and dimensional control. Grade and geometry choice improves process reliability The LX11 grade from Tungaloy is formulated to provide a compromise between abrasion resistance and edge toughness, making it suitable for a broad range of turning operations. The 0.4 mm corner radius offers a modest edge strength increase for general finishing and light roughing, while the 0° relief angle and 90° orientation suit conventional external and internal turning set-ups. Selecting this configuration supports stable chip formation and predictable tool wear, which assists process planning and cost calculations. Practical benefits for workshop and production use Using ISO‑compliant inserts simplifies inventory and reduces set‑up complexity across machines. The square plate shape allows four indexable edges, which improves economics per insert. The absence of an integrated chipbreaker means chip control must be addressed via cutting parameters and toolholder orientation; however, the robust Tungaloy carbide grade helps maintain a sharp cutting edge for longer, improving component surface quality and cycle time consistency. For specialised materials or applications, pairing the insert with the correct holder and machining data is recommended. For machining inquiries and to source Tungaloy SNGN120304 LX11 inserts, contact Metav Werkzeuge for personalised advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Manufacturer SKU: 6806552-Tungaloy Manufacturer article number: 6806552 SKU (manufacturer): TUN6806552 Model series: ISO turning inserts WPL designation: SNGN120304 LX11 Facts Corner radius: 0.4 mm Plate size: 12 mm Plate thickness: 3.18 mm Relief angle: 0° Lead angle: 90° Special features Material: carbide Grade/coating: LX11 (Tungaloy grade) No chipbreaker No hole Plate shape: square Intended use: turning (external and internal) Compatibility: ISO holders (form-dependent) FAQ What materials is this insert suitable for? The SNGN120304 LX11 insert is intended for general turning; the LX11 grade offers balanced wear resistance and toughness suitable for a wide range of steels and similar materials in standard turning applications. How is the insert fixed in the holder given it has no central hole? This square insert is secured in compatible ISO SNGN toolholders using the appropriate clamp or shim system; correct seating and torque are essential for repeatable performance with the SNGN120304 LX11. Does the insert include a chipbreaker for improved chip control? The SNGN120304 LX11 is supplied without a chipbreaker, so chip formation is managed via cutting parameters and holder geometry rather than an integrated chip control feature. What are the key dimensions to check for holder compatibility? Verify plate size (12 mm), plate thickness (3.18 mm), corner radius (0.4 mm) and the SNGN form designation when matching the insert to a toolholder. Can this insert be indexed to use multiple cutting edges? Yes, the square plate shape provides multiple indexable edges; the SNGN120304 LX11 can be rotated to present fresh cutting edges as they wear. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120312 LX11 Wendeplatten - Tungaloy
Benefit from the combination of Tungaloy LX11 wear resistance, ISO SNGN120312 geometry and a robust carbide substrate for steady turning performance. Order the SNGN120312 LX11 insert directly via Metav Werkzeuge or ask our consultants if needed. SNGN 120312 LX11 indexable insert for turning by Tungaloy — ISO square 90° geometry, 1.2 mm corner radius SNGN120312 LX11 Tungaloy insert for precision external and internal turning, designed to complement holder geometry with a focus on edge stability and wear resistance Tungaloy LX11 grade for wear resistance ISO SNGN120312 geometry, 90° seating Square 12 mm format, 1.2 mm corner radius Carbide substrate for robust cutting performance Consistent cutting performance for productive turning operations The SNGN120312 LX11 indexable insert combines a wear-resistant Tungaloy LX11 grade with a solid carbide substrate to deliver steady tool life and repeatable cutting behaviour. The chosen material combination emphasises edge stability, which reduces flank wear and helps maintain dimensional tolerance during longer runs. For turning operations, this translates into fewer insert changes, less machine downtime and more predictable process windows, supporting efficient batch and series production. Seamless integration with ISO holders reduces setup time Compatibility is governed by ISO norms: insert form, clearance angle (0°), tolerance class, clamping method, size and thickness. The SNGN form and 90° seating ensure straightforward mounting in standard external holders or boring bars when the correct pocket and clamping kit are used. This standardisation enables fast tool changes and lowers setup complexity, allowing the production team to focus on machining strategy and feed/speed optimisation rather than bespoke fitting procedures. Geometry choices that balance stability and surface finish A 1.2 mm corner radius provides a compromise between edge strength and surface quality, offering improved load distribution at the cutting edge for medium-depth passes while still supporting acceptable finish levels. The 12 mm square format and 3.18 mm plate thickness contribute to mechanical rigidity, making the insert suitable for stable setups and conventional turning tasks. Note that the insert is supplied without a chipbreaker, so chip control should be selected according to workpiece material and cutting conditions to achieve the desired chip form and evacuation. Practical system considerations for reliable results The insert is intended for use as part of an ISO indexable turning system: matching the insert to a correct external holder or boring bar, a suitable clamping plate and replacement screws completes the assembly. Selecting the appropriate chipbreaker or tool geometry in conjunction with the LX11 grade allows optimisation for a wide range of turning tasks. By focusing on measurable parameters—edge life, run time, and clamping repeatability—the insert supports consistent production quality and predictable maintenance intervals. Contact Metav Werkzeuge for tailored advice on selecting the correct Tungaloy SNGN120312 LX11 turning insert for specific workpiece materials and holder systems; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6806553 Manufacturer SKU: TUN6806553 Model series: ISO indexable turning inserts Designation: SNGN120312 LX11 Manufacturer: Tungaloy Numbers / Core technical data Corner radius: 1.2 mm Plate thickness: 3.18 mm Plate size: 12 mm Seating angle: 90° Clearance angle: 0° Plate form: square Special features / Versions Grade/coating: LX11 Substrate material: carbide Chipbreaker: without Hole style: without hole Intended application: turning System components: insert + external holder/boring bar + clamping plate + screws FAQ What applications is this insert designed for? This insert is designed for turning operations; the SNGN120312 LX11 Tungaloy insert is intended for both external and internal turning when paired with the appropriate holder and clamping kit. How is compatibility with a toolholder determined? Compatibility depends on insert form, clearance angle (0°), tolerance class, clamping method, plate size and thickness; matching these parameters ensures correct fitting of the SNGN120312 insert into ISO holders. What are the key dimensions and geometry of the insert? Key data: 12 mm square format, 3.18 mm thickness, 1.2 mm corner radius, 90° seating angle; the insert is supplied without a hole and without a chipbreaker. Does the insert feature a coating or chipbreaker? The product is supplied in the LX11 Tungaloy grade and is supplied without a chipbreaker; chip control should be selected according to the workpiece material and machining strategy. What identifiers should be used when ordering or specifying? Use article number 6806553 and manufacturer SKU TUN6806553 when specifying the SNGN120312 LX11 Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120404 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, LX10 carbide grade and a compact 90° cutting edge for consistent turning results; compatibility with ISO holders ensures fast tool changes and predictable performance. Order directly via Metav Werkzeuge or consult the experts for application-specific advice. SNGN120404 LX10 — Indexable Turning Insert for Turning (Tungaloy) SNGN120404 LX10 is an ISO-designated square insert engineered for general turning tasks, offering a balanced grade and geometry for stable chip formation and repeatable production results. ISO-standard SNGN geometry LX10 grade 90° cutting edge for versatile turning 0° clearance angle for reliable engagement Carbide grade optimised for wear resistance Consistent cutting performance for external and internal turning The square SNGN120404 insert provides a proven foundation for repeatable machining. Its 90° cutting edge and 0° clearance deliver a stable engagement when used for both external and internal turning, reducing vibration and enabling consistent surface finish. The insert’s carbide composition ensures a predictable wear pattern; combined with the LX10 grade, this supports process stability across medium- to high-volume production. In practical terms, the geometry allows secure seating in ISO holders and straightforward indexability, which shortens downtime for insert changes and maintains cycle-time consistency. LX10 grade: balanced wear resistance and edge stability The LX10 grade is tailored to offer a compromise between wear resistance and toughness, which helps preserve the cutting edge under variable cutting conditions. This balance reduces the need for frequent index changes while maintaining dimensional accuracy across batches. For operations where flank wear and edge chipping are primary concerns, the grade’s formulation enhances tool life without sacrificing surface integrity. The result is improved uptime and a more economical tool life curve in serial turning tasks. Fast integration into existing ISO tool systems Compatibility is governed by form, clearance angle, tolerance class, clamping and dimensional fit; the SNGN geometry aligns with ISO holders and conventional clamping kits. The insert’s compact dimensions — 12 mm size, 4.76 mm thickness and 0.4 mm corner radius — enable straightforward retrofitting into existing toolstations and facilitate fast changeovers. With no central hole and a square plate format, mounting uses standard clamping sets and screws. The system-level design (ISO insert, external holder or boring bar, backing pad/clamp set and replacement screws) supports a quick return to cutting after service or reconfiguration. For reliable, production-ready turning with a balanced carbide grade, request availability of the Tungaloy SNGN120404 LX10 insert from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and order information Technical data Article number: 6852108-Tungaloy Manufacturer article number: 6852108 Model series: ISO turning insert series Label: SNGN120404 LX10 Tungaloy turning insert Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting edge angle: 90° Design & features Material: carbide Grade: LX10 (Tungaloy) Shape: square insert Chipbreaker: none Mounting: without central hole Intended application: turning (external and internal) System notes: ISO insert with compatible external holder, backing pad/clamp set and screws FAQ Which turning tasks suit this insert best? The SNGN120404 LX10 insert is intended for general external and internal turning operations where a robust 90° cutting edge and a balanced carbide grade deliver repeatable results. Is this insert compatible with standard ISO holders? Compatibility depends on insert form, clearance, tolerance class, clamping and thickness; the SNGN geometry is ISO-standard and designed to seat in matching ISO external holders and boring bars. Does the insert have a central hole for screw fixing? No, this insert is supplied without a central hole and is secured using conventional clamp and pad arrangements for square plates. What are the dimensional characteristics that affect tool selection? Key dimensions are the 12 mm plate size, 4.76 mm thickness and 0.4 mm corner radius; these determine seat fit, cutting reach and edge strength in the toolholder. How does the LX10 grade influence tool life? The LX10 grade balances wear resistance and toughness, which helps maintain edge integrity under varying cutting conditions and can reduce total index changes in serial production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120404 LX11 Wendeplatten - Tungaloy
Take advantage of the ISO‑standard form factor and the LX11 Tungaloy grade to combine consistent edge stability with economical tool life; order the insert directly via (Metav Werkzeuge) or consult the advisers for application-specific recommendations. SNGN 120404 LX11 indexable turning insert for external and internal turning by Tungaloy — square geometry, 90° cutting angle SNGN 120404 LX11 indexable insert designed for general turning applications; square‑shaped ISO insert for compatibility with standard holders and bores ISO 120404 form for standard holders LX11 Tungaloy carbide grade for wear resistance 0.4 mm nose radius for fine surface finish Square geometry with 90° cutting angle Reliable ISO form and holder compatibility for stable machining The ISO‑normalised SNGN 120404 form ensures straightforward integration with widely used turning holders: the square geometry and the 90° cutting angle create a predictable cutting engagement that supports consistent chip load and tool life. Compatibility is determined by the insert form, clearance angle, tolerance class, fixing method, size and thickness; adherence to ISO dimensions simplifies inventory management and reduces set‑up time. The listed 0° clearance angle means the insert is ground for neutral clearance; this helps maintain cutting edge strength where rigid setups are used. Durable cutting performance from LX11 Tungaloy carbide Equipped with the LX11 grade from Tungaloy, the insert combines wear resistance and edge stability to extend index intervals and preserve surface quality. The tungsten carbide substrate provides hardness for abrasive resistance while the tailored LX11 composition improves toughness under interrupted cuts. For practical terms: expect longer effective life between indexings and steadier component finish with fewer grade‑related variances. The absence of an integrated chipbreaker suits applications where custom chip control is achieved via tool geometry or external devices. Precise finish capability and mechanical rigidity for predictable results A 0.4 mm nose radius balances strength and surface finish, making the insert suitable for light finishing passes and fine external contours; a larger radius would favour heavy cuts, but here the focus is on dimensional accuracy and surface integrity. The plate thickness of 4.76 mm and 12 mm size contribute to mechanical rigidity when clamped in a proper holder, reducing chatter and enhancing repeatability. Use this insert in the recommended system build: ISO insert, matching external holder or boring bar, shim/clamp set and correct mounting screw; this approach secures both process stability and consistent results across batches. Contact Metav Werkzeuge for tailored application advice and to request genuine Tungaloy SNGN 120404 LX11 inserts — quote SKU TUN6806555 when enquiring Technical data Article number: 6806555 Manufacturer SKU: TUN6806555 Manufacturer item no.: 6806555 Data Plate designation: 120404 Plate size: 12 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Cutting angle: 90° Special features Grade: LX11 Material: carbide Geometry: square Chipbreaker: without Hole style: without hole Model series: ISO turning indexable inserts Intended use: turning System components: insert, suitable external holder or boring bar, shim/clamp set, replacement screws FAQ What applications is this insert suited for? The Tungaloy SNGN 120404 LX11 indexable insert is intended for external and internal turning where a square ISO insert and a fine nose radius are required. How does the LX11 grade affect performance? The LX11 grade from Tungaloy enhances wear resistance and edge stability, which helps the insert maintain cutting performance and consistent surface finish over multiple indexings. Is a chipbreaker included with this insert? No, this insert is supplied without a chipbreaker; chip control should be achieved via tool geometry, feed selection or external chip‑control devices. Which holders are compatible with the ISO 120404 form? Holders designed for ISO SNGN 120404 inserts — matching form, size, thickness, fixing method and tolerance class — are compatible; correct matching ensures secure clamping and process stability. What effect does the 0.4 mm nose radius have on the part finish? A 0.4 mm nose radius provides a good balance between strength and surface finish, improving dimensional accuracy and producing finer surface quality on finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120408 DX140 Wendeplatten - Tungaloy
Benefit from the combination of DX140 PCD and the AddMultiTurn system for high cutting speeds, extended tool life and reliable multidirectional turning; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNGN 120408 DX140 — PCD Turning Insert (90°) by Tungaloy The SNGN120408-DIA DX140 is a square PCD turning insert designed for multidirectional turning, suited to longitudinal, facing and profile turning operations. PCD grade DX140 for high cutting speeds Suitable for aluminium and non‑ferrous metals AddMultiTurn system for multidirectional turning Extended tool life through robust PCD High-performance PCD for faster, cleaner cuts The PCD grade DX140 offers a combination of durability and thermal stability that enables significantly higher cutting speeds on soft and abrasive, non-ferrous materials. As a polycrystalline diamond option, the cutting layer resists abrasive wear and preserves edge geometry, which translates into fewer index changes and more productive machining cycles. This performance profile is particularly relevant where surface finish and dimensional stability on aluminium and similar alloys matter. The result is a predictable machining process with lower tooling consumption and improved throughput. Multidirectional system design for flexible turning The AddMultiTurn model series introduces a system approach: the insert, holder and clamping mechanism are matched for cutting in several directions with a single tool setup. This system reduces tool changes and simplifies tool inventory while maintaining process stability. The square plate and 90° edge orientation make it suitable for both longitudinal and profile operations, allowing a single tool to cover multiple tasks. For workshops seeking to streamline tool management, this alignment of insert geometry and system design supports shorter setup times and consistent production results. Geometry and edge preparation for consistent results With a corner radius 0.8 mm and a plate thickness of 4.76 mm, the insert balances strength and cutting precision. The moderate radius improves load distribution at the cutting edge, reducing the risk of chipping during interrupted cuts or when handling variable cross-sections. A zero-degree clearance angle supports stable contact conditions and predictable chip formation when used with the designated chipbreaker. These design choices contribute to a longer effective edge life and consistent workpiece surfaces, particularly in repetitive turning cycles. Material compatibility and application recommendations Engineered for machining aluminium, other non‑ferrous metals and abrasive non-metallics, the carbide-backed indexable insert with a PCD layer excels where abrasive wear and the need for excellent surface finish coincide. Typical applications include finishing and semi-finishing of profiles, facing operations and long-axis turning where high feed rates and reduced secondary operations are desired. For optimal results, match the insert to holders from the AddMultiTurn range and adjust speeds to exploit the DX140 grade’s high-speed capability while ensuring coolant and chip evacuation suit the workpiece material. Contact Metav Werkzeuge today for tailored recommendations on Tungaloy PCD inserts and to discuss the best AddMultiTurn holder combinations for specific turning tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806562 Manufacturer SKU: TUN6806562 SKU: 6806562-Tungaloy Designation: SNGN120408-DIA DX140 Model series: AddMultiTurn Manufacturer: Tungaloy Application: Turning Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Clearance angle: 0° Edge angle: 90° ISO code: 120408 Special features Polycrystalline diamond (PCD) cutting layer Grade: DX140 Chipbreaker: DIA Plate form: square Hole: without hole Substrate: cemented carbide FAQ What materials is this insert suitable for? The answer: The SNGN120408-DIA DX140 insert is tailored for aluminium, other non‑ferrous metals and abrasive non‑metallics, benefitting from the DX140 PCD grade for long tool life. Can this insert be used for profiling and facing? Yes. The square shape and 90° edge make the insert suitable for longitudinal turning as well as facing and profile turning when mounted in compatible AddMultiTurn holders. How does the DX140 grade affect machining parameters? DX140 provides high wear resistance and thermal stability, enabling increased cutting speeds and longer intervals between indexing compared with conventional carbide grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120408 FX105 Wendeplatten - Tungaloy
Benefit from a combination of reliable wear resistance, a stable cutting edge and versatile multidirectional machining for reduced tool changes and consistent part quality; order directly via Metav Werkzeuge or request consultation from the Metav Werkzeuge team. SNGN120408-DIA FX105 – SNGN 120408 FX105 indexable insert for turning by Tungaloy The SNGN120408-DIA FX105 is a square, carbide indexable insert designed for multidirectional turning, suitable for longitudinal turning, facing and profiling within AddMultiTurn systems. Multidirectional turning with one tool FX105 grade for wear resistance and toughness Square 12 mm plate with 0.8 mm radius Compatible with AddMultiTurn holder system Fewer tool changes, higher machine uptime The AddMultiTurn concept enables a single tool assembly to perform several machining directions, reducing non-productive time and simplifying tool management. By combining a dedicated holder, reliable clamping and a matching indexable plate, the system reduces tool-change frequency and increases net cutting time. The result is more predictable cycle times and improved production throughput for mixed-batch turning operations. Durable grade for stable cutting performance The Tungaloy FX105 grade balances wear resistance and toughness, which supports a stable cutting edge under varying cutting conditions. This composition helps to extend insert life and maintain dimensional stability over longer tool life, lowering the frequency of insert replacement and providing more consistent edge life compared with unspecified grades. The carbide substrate ensures hardness while the grade’s properties assist in controlled chip formation. Geometry tuned for precision and surface quality A square plate with a 12 mm size and a 0.8 mm corner radius provides a dependable compromise between edge strength and profile accuracy. The insert’s 90° included angle and the specified 0° clearance angle produce repeatable contact geometry, which is beneficial for external profiling and facing where true shoulder definition and surface finish matter. The plate thickness of 4.76 mm contributes to rigidity, while the DIA chipbreaker supports effective chip control for typical turning feeds and depths. System compatibility and practical applications The insert is part of the AddMultiTurn model series and is supplied without a hole, compatible with holders and clamping systems designed for the SNGN form. Typical applications include longitudinal turning, plan (facing) and profiled turning operations. The design suits production environments that demand flexibility between operations and consistent chip evacuation, making it practical for job shops and workshops focusing on versatile turning tasks. Secure reliable multidirectional turning with the Tungaloy SNGN120408-DIA FX105 insert through Metav Werkzeuge; request tailored advice from the Metav Werkzeuge team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806558 Manufacturer SKU: TUN6806558 SKU: 6806558-Tungaloy Description: SNGN120408-DIA FX105 Tungaloy indexable insert Facts Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Grade: FX105 Special features Material: carbide Chipbreaker: DIA Plate form: square Hole: without hole Model series: AddMultiTurn Intended use: turning (longitudinal, facing, profiling) Manufacturer: Tungaloy FAQ What machining tasks is this insert designed for? This indexable insert is intended for turning tasks — including longitudinal turning, facing and profiling — as part of an AddMultiTurn multidirectional system. How does the FX105 grade affect tool life? The FX105 grade offers a balance of wear resistance and toughness, which helps to extend insert life and maintain cutting-edge stability during varied turning conditions. What are the key geometric features that influence surface finish? The square plate with a 12 mm size, 0.8 mm corner radius and a 90° included angle provide rigidity and repeatable contact geometry, aiding in consistent surface quality and accurate profiles. Is the insert compatible with a holder system for multidirectional turning? Yes; the insert is designed for use within the AddMultiTurn system and is intended to be mounted in compatible holders with the appropriate clamping arrangement. Does this insert have a central hole for mounting? The insert is supplied without a hole and is secured in holders that accept this format. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120408 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of LX10 wear resistance, a 0.8 mm corner radius and a multidirectional system design to maintain stable cutting forces and consistent part quality; order directly via Metav Werkzeuge or consult the team for holder compatibility and machining advice. SNGN 120408 LX10 SNGN insert for turning — multidirectional system, 0.8 mm radius | Tungaloy SNGN120408-DIA LX10 is a square carbide indexable insert designed for multidirectional turning, offering a balance of wear resistance, edge stability and reliable chip control. LX10 grade for wear resistance and edge stability Square 12 mm size for secure clamping 0.8 mm corner radius for fine profiling Chipbreaker DIA for controlled chip formation Consistent productivity through balanced grade and geometry The combination of the LX10 cutting grade and the insert’s geometry delivers a measured balance between wear resistance and toughness, which reduces unscheduled tool changes and supports continuous production. Designed for the AddMultiTurn series, the insert’s specification helps maintain stable cutting forces in multidirectional turning applications. The carbide substrate paired with the DIA chipbreaker reduces edge chipping and promotes controlled swarf breakage, contributing directly to improved process reliability and fewer rejects. Versatile application for longitudinal, facing and profile turning Engineered for common turning operations, the insert suits longitudinal, facing and profile turning. The square 12 mm form factor and a thickness of 4.76 mm ensure mechanical stability in clamping, while the 0° clearance and 90° geometry support a predictable cutting direction. When combined with an appropriate holder and correct feed direction, the system enables efficient material removal and consistent surface finish, simplifying process planning for production and job-shop environments. Precision features that reduce setup complexity A corner radius of 0.8 mm provides a useful compromise between edge strength and surface definition, permitting medium-detail profiling without sacrificing tool life. The insert is supplied without a hole, optimising contact area for certain clamping systems used in multidirectional turning setups. Its configuration reduces the need for frequent adjustments and helps to shorten setup times, especially when matching inserts across a tool family within the AddMultiTurn system. Practical guidance for tool selection and use Select the insert when consistent edge stability and economical machining are priorities. Note that feed direction and holder style influence performance; verify holder compatibility with the AddMultiTurn system to achieve the stated benefits. The insert’s DIA chipbreaker is intended to deliver controlled chips under typical turning feeds, lowering the risk of entanglement and supporting safer, cleaner production. For matched performance, pair the insert with clamping systems specified for square indexable geometry. Contact Metav Werkzeuge to request compatible holders or to confirm optimal parameters for the LX10 SNGN120408-DIA insert and ensure reliable results in multidirectional turning setups Technical data Article number: 6852122 SKU: 6852122-Tungaloy Manufacturer item no.: TUN6852122 Brand: Tungaloy Model series: AddMultiTurn Designation: SNGN120408-DIA LX10 Key figures Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 90° Relief angle: 0° Grade: LX10 Materials & features Material: carbide Chipbreaker: DIA Shape: square Hole: without hole Intended application: turning (longitudinal, facing, profile) System use: multidirectional turning system (AddMultiTurn) Typical components: holder, indexable plates, clamping system FAQ What turning operations is this insert suitable for? The SNGN120408-DIA LX10 insert from Tungaloy is designed for longitudinal turning, facing and profile turning within a multidirectional turning system. How does the LX10 grade affect tool life and performance? The LX10 grade offers a balance of wear resistance and toughness, which helps to extend tool life while maintaining edge stability during interrupted or continuous cuts. What chip control can be expected with the DIA chipbreaker? The DIA chipbreaker promotes controlled chip formation under recommended feed conditions, reducing the risk of long swarf and improving workplace safety. Are there special requirements for clamping or holders? Performance depends on correct holder selection; the insert is optimised for the AddMultiTurn system, so matching holders and verifying feed direction are recommended for best results. Is the insert supplied with a central hole? No, this insert is supplied without a hole to maximise seating contact with certain clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120408 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of the LX11 Tungaloy carbide grade, a 0.8 mm corner radius and a 90° square geometry to ensure stable cutting and consistent profile accuracy in multidirectional turning. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. SNGN 120408 LX11 turning insert — square, 90° corner, 0.8 mm | Tungaloy A SNGN 120408 LX11 indexable insert designed for multidirectional turning within AddMultiTurn systems, suitable for longitudinal, face and profile turning operations LX11 carbide grade for balanced wear resistance Square insert with 90° cutting edge 0.8 mm corner radius for precise profiling Designed for multidirectional AddMultiTurn systems High-efficiency turning for multidirectional machining The insert is developed for productive turning where multiple cutting directions are required. Integrated into the AddMultiTurn system, the geometry and clamping concept reduce tool changes and increase uptime, contributing to a smoother production flow. The square plate and 90° included angle support robust engagement during face and longitudinal cuts, while the DIA chipbreaker stabilises chip formation. This yields measurable efficiency gains in cycle time and repeatability without compromising surface integrity. Balanced grade and geometry for consistent edge life The LX11 Tungaloy grade combines wear resistance and toughness to deliver a dependable balance between life and edge stability. The 0.8 mm corner radius increases edge strength for profile turning and gentle chamfering, while the neutral 0° relief angle maintains predictable cutting behaviour across different directions. These traits make the insert particularly suitable where repeatable performance and low tool-change frequency are priorities, translating technical features into lower downtime and reduced process variability. Compatibility and practical application guidance Built as a square, indexable plate with a thickness of 4.76 mm and a 12 mm size, this insert fits holders and clamping systems within the AddMultiTurn family that accept holeless square plates. The combination of carbide construction and Tungaloy grade ensures suitability for a broad range of turning tasks—longitudinal, facing and profiling—when the process requires both stability and adaptability. The absence of a centre hole simplifies inventory and mounting in dedicated toolholders designed for this format. Contact Metav Werkzeuge for expert selection and a tailored quotation for Tungaloy inserts; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for immediate advice Technical data Article number: 6806559 SKU: 6806559-Tungaloy Manufacturer SKU: TUN6806559 Model series: AddMultiTurn Designation: SNGN120408-DIA Dimensions & angles Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Relief angle: 0° Materials & features Material: carbide Grade/coating: LX11 (Tungaloy grade) Chipbreaker: DIA Plate form: square Hole: without hole Application: turning — longitudinal, face and profile turning FAQ Which turning operations is this insert suited for? The SNGN120408-DIA LX11 Tungaloy insert is designed for multidirectional applications such as longitudinal turning, facing and profile turning within AddMultiTurn tool systems. What does the LX11 grade provide? LX11 is a Tungaloy carbide grade formulated to balance wear resistance and toughness, giving the insert stable cutting performance and good edge life under varying cutting conditions. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength and improves profile accuracy during finishing and profiling passes while moderating stress concentration on the cutting edge. Is the insert supplied with a centre hole? The plate is supplied without a hole (no hole), compatible with holders designed for holeless square inserts. Which system components are required to use this insert? Use the insert with AddMultiTurn-compatible holders and the matching clamping system; the system concept comprises the holder, indexable plates and the clamping mechanism. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120408 TH10 Wendeplatten - Tungaloy
A compact solution for multi‑directional turning that pairs the sharp TH10 uncoated carbide grade with a 0.8 mm corner radius to deliver controlled feeds and consistently clean surface finishes; the square geometry plus DIA chipbreaker supports stable chip control — order the insert directly via Metav Werkzeuge or ask our consultants if needed. SNGN 120408 TH10 — Tungaloy indexable insert for turning SNGN120408-DIA TH10 is a square indexable insert engineered for multi‑directional turning, suited to longitudinal, face and profile turning with a single tool set‑up. Square insert SNGN 120408 TH10 Sharp universal grade for non‑ferrous alloys Chipbreaker DIA for clean surface finish 0.8 mm corner radius for controlled feed Faster process flows with multi‑directional capability The AddMultiTurn system design enables a single indexable insert to serve multiple cutting directions, reducing tool changes and set‑up time while improving cycle efficiency. With the TH10 uncoated carbide grade, the insert exhibits a sharp cutting edge that lowers cutting forces in soft and non‑ferrous materials; this leads to reduced vibration and a more reliable machining rhythm. For workshops aiming to increase throughput without complex tooling stacks, the combination of multi‑directional use and a low‑force cutting edge translates directly into measurable productivity gains. Predictable cut quality through consistent geometry The square plate form and precise dimensions ensure rigidity and repeatability in everyday turning. Key geometry values such as the 12 mm inscribed size, 4.76 mm plate thickness and 90° cutting angle provide a stable contact interface with the holder, while the corner radius 0.8 mm helps to control feed behaviour and edge strength. These measurable features make tool selection straightforward and enable consistent surface results, so process engineers can specify feeds and speeds with reduced risk of unexpected burr or edge breakage. Clean chips and surface finishes for non‑ferrous workpieces The chipbreaker DIA is shaped to encourage uniform chip formation and evacuation when machining aluminium, brass and similar materials, helping to avoid built‑up edge and surface smearing. As an uncoated carbide grade, the insert keeps the cutting edge acute, which is particularly beneficial where low cutting forces and pristine finishes are priorities. Typical applications include longitudinal turning, facing and profile work where dimensional stability and finish are decisive quality criteria. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy TH10 inserts into production — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806561 Manufacturer SKU: TUN6806561 SKU: 6806561-Tungaloy Model series: AddMultiTurn Facts Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 90° Special features Grade: TH10 Material: uncoated carbide Chipbreaker: DIA Plate shape: square Hole: without hole Application: Turning System composition: holder, indexable inserts and clamping system Typical operations: longitudinal turning, facing, profile turning FAQ What materials is this insert best suited for? The SNGN120408-DIA TH10 insert is optimised for non‑ferrous materials such as aluminium and brass where a sharp, uncoated cutting edge helps to keep cutting forces low and surface quality high. Which turning operations can this insert handle? This indexable insert is designed for longitudinal turning, facing and profile turning within the AddMultiTurn multi‑directional system. Is the insert coated or uncoated? The TH10 grade is an uncoated carbide designed to deliver a sharp cutting edge for reduced cutting forces and clean finishes in suitable materials. What chip control can be expected with this insert? The DIA chipbreaker promotes steady chip formation and evacuation, helping to prevent built‑up edge and supporting consistent surface quality with non‑ferrous alloys. What are the critical dimensions to consider when specifying the insert? Key dimensions are the 12 mm inscribed size, 4.76 mm plate thickness and 0.8 mm corner radius, together with the 90° cutting angle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGN 120412 BX360 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance and precise geometry for consistent finishing of hardened components; the BX360 CBN grade and ISO SNGN geometry deliver reliable productivity and reduced rework. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. SNGN120412 BX360 ISO turning insert for hardened steels — Tungaloy A SNGN120412 BX360 indexable turning insert engineered for finishing hardened steels and intended for ISO-standard turning toolholders in external and internal turning operations. CBN grade BX360 for hardened steels ISO SNGN120412 geometry, square form 1.2 mm corner radius for fine finishing 0° clearance angle, suited for finishing Precise finishing for hardened components with CBN technology The use of cubic boron nitride (CBN) in the BX360 grade is tailored to the demands of hard-machining. This cutting material offers elevated wear resistance and a stable cutting edge, which translates into longer tool life and more predictable tool-change intervals. For shops machining quenched or case-hardened parts, the combination of a square ISO geometry and a CBN cutting grade supports a consistent surface finish with fewer dressing cycles. Compatibility with ISO holders is defined by form, clearance angle, tolerance class, fixing method, size and thickness, ensuring straightforward integration into standard turning setups. Geometry and edge design that enhance process stability The ISO SNGN form provides a robust platform for finishing cuts: the square plate with a 90° included angle permits rigid clamping and repeatable orientation, while the 1.2 mm corner radius balances edge strength with the ability to achieve fine surface quality. A 0° clearance angle reduces radial runout sensitivity during light finishing passes. The insert is supplied without a chipbreaker, so selection of a matching holder and cutting parameters is essential to control chip flow. As a system, the insert, suitable outer holder or boring bar, shim/clip and replacement screws form a predictable setup that minimises downtime and supports stable cycle times. Application guidance for production-oriented workshops Designed primarily for turning, the insert is suited to external and internal finishing of hardened steels, and — depending on the specific grade version — may be applicable to certain grades of cast iron. When adopting the BX360 grade, choose cutting speeds and feeds optimised for CBN to exploit its longer life and consistent edge geometry; lower feed rates and stable clamping reduce the risk of tool fracture and ensure reproducible component quality. Indexing the plate at scheduled intervals and keeping spare inserts to hand increases process uptime. Shops seeking predictable finishing performance in serial production will benefit from the grade’s wear characteristics and the ISO-compliant geometry of the insert. Contact Metav Werkzeuge for application support and availability of Tungaloy BX360 inserts; technical consultants are available to advise on holder compatibility and cutting data via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6806568 Manufacturer SKU: TUN6806568 Model series: ISO-Drehwendeschneidplatten Label: SNGN120412 BX360 Tungaloy-Wendeplatte Core specifications Plate designation: SNGN120412 Grade: BX360 (CBN) Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 90° Hole: without hole Materials & features Cutting material: cubic boron nitride (CBN) Body material: carbide Shape: square Chipbreaker: none Intended application: turning (external and internal) System components: insert, holder/boring bar, shim/clip, replacement screws FAQ What materials is the insert suited for? The BX360 CBN grade is designed for hardened steels and, depending on the version, can be used for selected cast iron applications; consult the supplied technical guidance for specific alloys. How does the SNGN120412 geometry affect holder choice? The ISO SNGN120412 geometry requires a matching square insert seat in an external holder or a compatible boring bar; compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness. Is there a chipbreaker on this insert? This insert is supplied without a chipbreaker, so chip control must be achieved via choice of holder geometry and cutting parameters. What is the corner radius and how does it influence finish? The corner radius is 1.2 mm; this radius offers a balance between edge strength and the ability to achieve fine surface finishes in finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
![Wendeplatte Tungaloy Tungaloy SNGN120412 FX105 Tungaloy-Wendeplatte Wendeplatte in Blister vor weissem Hintergrund., einsetzbar, Sägeblätter, Metall-Einsätze, Tungsten, Werkzeug"]} ```Oops```{](https://cdn.metav-shop.de/media/51/88/cf/1787139493/sngn120412-fx105-tungaloy-wendeplatte.jpeg?ts=1787139495 "Tungaloy SNGN120412 FX105 Tungaloy-Wendeplatte Wendeplatte")
SNGN 120412 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, a wear‑resistant Tungaloy grade and a precise 1.2 mm nose radius for stable turning results and predictable tool life; order directly via Metav Werkzeuge or contact our consultants for application support. SNGN120412 FX105 indexable turning insert — 1.2 mm radius, Tungaloy SNGN120412 FX105 is an ISO‑design square indexable insert developed for general turning operations, offering a blend of wear resistance and edge stability for external and internal turning. ISO‑standard geometry for holder compatibility FX105 carbide grade for wear resistance 1.2 mm nose radius for precise profiling Square 12 mm size with 90° included angle Consistent cutting performance designed for reliable turning The SNGN120412 FX105 insert combines an ISO‑standard geometry with a defined included angle to deliver predictable cutting behaviour. The 1.2 mm nose radius supports accurate profile generation and short‑run finishing, while the square form provides four usable cutting edges, increasing indexable life. Because the insert is made from carbide and specified for turning, machining parameters can be set with confidence; compatibility with matched holders is governed by form, 0° relief, tolerance class, attachment method, size and thickness. This reduces setup time and helps maintain consistent process results. High wear resistance and edge stability for productive cycles The FX105 grade from Tungaloy emphasises a balance between wear resistance and toughness to withstand varied turning conditions. This material selection supports longer edge life under intermittent and continuous cuts and helps maintain dimensional accuracy over longer tool life. The grade is optimised to deliver stable chip formation where possible and to protect the cutting edge from premature failure, translating into fewer tool changes and improved machine uptime. For users seeking predictable repeatability, the grade contributes to a more economical production flow. Compatibility and secure clamping for interchangeable use The insert’s square geometry, 12 mm size and 4.76 mm thickness make it suitable for a broad range of ISO‑compliant external holders and boring bars; there is no hole and no chipbreaker on this variant, so the clamping system must match the insert profile. Key measurable data such as 4.76 mm thickness and 1.2 mm corner radius ensure the component seats correctly in supported tool bodies, reducing the risk of misalignment. Practical system setup typically includes an external holder or boring bar, a shim/clamping set and replacement screws to achieve repeatable, secure fixation. Application guidance to support process security and surface quality Intended for both external and internal turning, this indexable insert performs well in general finishing and medium cutting scenarios when the correct feed and speed are selected. Because no chipbreaker is fitted, the choice of cutting parameters and coolant strategy should consider chip form and evacuation. Selecting the FX105 grade together with an appropriate holder and stable setup yields improved surface finish and dimensional control. For specific workpiece materials and cutting data, technical consultation is recommended to match the grade and geometry to the machining task. For a reliable production upgrade using Tungaloy FX105 grade, contact Metav Werkzeuge for technical guidance or to secure stock of the SNGN120412 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806565 Manufacturer SKU: TUN6806565 Model series: ISO turning indexable inserts Material: Carbide Facts Nose radius: 1.2 mm Thickness: 4.76 mm Insert size: 12 mm Relief angle: 0° Included angle: 90° Design & features Square insert, 12 mm No hole No chipbreaker Grade: FX105 (Tungaloy) ISO designation: SNGN120412 Application: external and internal turning Compatibility: holder form, relief angle, tolerance class, attachment, size, thickness System components: insert, external holder or boring bar, shim/clamping set, replacement screws FAQ What applications is this insert suitable for? This insert is intended for general external and internal turning operations; the FX105 grade supports medium‑duty turning and finishing tasks. Which holders fit the SNGN120412 insert? Compatibility depends on holder form, 0° relief, tolerance class, attachment method, size and thickness; use ISO‑compliant turning holders matched to the insert geometry. What material is the SNGN120412 FX105 made from? The cutting body is manufactured from carbide and supplied in Tungaloy’s FX105 grade for improved wear‑resistance and edge stability. Are there chipbreakers or holes on this variant? This variant is supplied without a chipbreaker and without a hole, so clamping and chip evacuation strategies should be planned accordingly. How does the FX105 grade affect tool life? The FX105 grade balances wear resistance and toughness to provide prolonged edge life under a range of turning conditions, helping to reduce changeover frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120412 LX10 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, a carbide construction and a 90° square form with a r1.2 mm corner radius for stable cutting performance and predictable tool life. Order the SNGN120412 LX10 insert directly via Metav Werkzeuge or ask our consultants if needed. SNGN120412 LX10 ISO turning indexable insert, square 90°, r1.2 — Tungaloy SNGN120412 LX10 is an ISO‑standard indexable turning insert intended for external and internal turning, offering a balanced mix of wear resistance and edge stability in a compact square format ISO turning insert, square 90° form Corner radius r1.2 mm for versatile cuts Tungaloy LX10 carbide grade for wear control Compatible with standard ISO toolholders Consistent cutting performance for general turning The ISO‑standard square geometry delivers a predictable cutting behaviour for both external and internal turning operations. The combination of a 90° seating angle and a corner radius r1.2 mm supports modest feed ranges and reliable chip formation, which helps maintain dimensional accuracy. This indexable insert is produced to ISO tolerances so that the fit and alignment in recognised holders remain consistent, reducing setup time and contributing to a steady production flow. Grade design that balances wear resistance and edge stability The LX10 specification from Tungaloy has been developed to supplement the insert geometry with an optimised balance of wear resistance and toughness. This makes the insert suitable for applications where a stable cutting edge matters over extended runs. The carbide substrate provides hardness for abrasive resistance while the grade characteristics help to retard edge chipping, offering longer useful life on repeatable turning cycles and reducing the need for frequent tool changes. Practical system advantages for workshop use The insert is supplied in a square form without a mounting hole and without an integrated chipbreaker, simplifying inventory for ISO holder systems that rely on a separate clamp or screw. The modest thickness and standard size support a broad range of ISO external holders and boring bars, making the part a flexible option for mixed-production environments. Where process optimisation is required, matching the LX10 grade to the workpiece material and selecting the correct holder geometry will deliver the most efficient machining outcome. For stable and productive turning, specify the Tungaloy LX10 SNGN120412 insert and contact Metav Werkzeuge for personalised advice and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6852123 Manufacturer SKU: TUN6852123 Seller SKU: 6852123-Tungaloy Model series: ISO turning indexable inserts Core dimensions Insert designation: SNGN120412 ISO code: 120412 Size: 12 mm Thickness: 4.76 mm Corner radius: r1.2 mm Clearance angle: 0° Shape: square 90° Material and features Material: carbide Grade/coating: LX10 (Tungaloy) Chipbreaker: without Hole: without hole Application: turning Compatible with: standard ISO holders FAQ What operations is this insert suited for? The SNGN120412 LX10 Tungaloy indexable insert (SKU 6852123-Tungaloy) is intended for external and internal turning operations and performs best where ISO‑standard square geometry is appropriate. What benefits does the LX10 grade provide? The LX10 grade from Tungaloy enhances the insert with a balance of wear resistance and edge stability, extending useful life while maintaining consistent cutting results. How is compatibility with toolholders ensured? Compatibility depends on form, clearance angle, tolerance class, attachment and size; the ISO designation SNGN120412 indicates conformity with standard dimensions for matching ISO holders. What are the key dimensions to check before fitting? Key values are the designation SNGN120412, size 12 mm, thickness 4.76 mm, corner radius r1.2 mm and a 0° clearance angle; these determine fit and application suitability. Does the insert have a chipbreaker or mounting hole? This SNGN120412 LX10 insert is supplied without a chipbreaker and without a hole, intended for clamping with standard screws or clamp sets Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120412 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of durable carbide construction, the LX11 cutting grade and ISO compatibility for reliable, productive turning results; order directly via Metav Werkzeuge or request application advice from our technical consultants. SNGN120412 LX11 — ISO turning insert (SNGN) by Tungaloy A SNGN120412 LX11 indexable turning insert for external and internal turning, designed as a square ISO-format cutting plate for standard holders ISO-formatted square insert Tungaloy LX11 carbide grade 1.2 mm corner radius for versatile turning Compatible with standard SNGN holders High wear resistance and consistent tool life for demanding turning The combination of a carbide substrate with the LX11 grade provides a balance of wear resistance and toughness that maintains cutting-edge integrity under sustained machining. This results in longer in-service intervals and fewer insert changes, which directly reduces process interruptions in production environments. The design focus on edge stability supports predictable tool life and steady component quality when turning both external and internal geometries. Reliable fit and straightforward holder compatibility to save setup time The ISO-compliant square geometry with a 90° seat and 4.76 mm plate thickness ensures a consistent interface with compatible SNGN holders and boring bars; this standardisation simplifies tool inventory and reduces mounting errors. The 1.2 mm corner radius offers a good compromise between strength and detail capability, enabling medium to general-purpose turning without frequent tool swaps. A 0° clearance provides clarity on seating and cutting orientation for correct tool positioning. Productivity benefits through stable cutting behaviour and easy integration Stable cutting performance leads to improved surface finishes and fewer rejects, while the insert’s format supports quick, repeatable index changes in multi-station or single-point setups. The integrated grade and geometry concept helps to control chip formation and maintain a robust cutting edge during continuous operation, which improves machine uptime and throughput. As a product from Tungaloy, this insert aligns with industrial expectations for consistent machining results in turning applications. Contact Metav Werkzeuge for tailored application advice and a quotation on Tungaloy turning solutions; technical support is available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6806566 SKU: 6806566-Tungaloy Manufacturer SKU: TUN6806566 Manufacturer: Tungaloy Facts Geometry: square, 90° Corner radius: 1.2 mm Clearance angle: 0° Thickness: 4.76 mm Size: 12 Hole: without hole Special features ISO designation: SNGN120412 Grade: LX11 Material: carbide Application: turning Chipbreaker: without FAQ What materials is this insert suitable for? The insert is specified for general turning applications; the SNGN120412 LX11 grade is intended to balance wear resistance and toughness for a broad range of workpiece materials in turning operations. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius provides increased edge strength compared with finer radii, improving stability on interrupted cuts and offering acceptable surface finish on general turning tasks. Is the insert compatible with standard SNGN toolholders? Yes, the ISO-compliant square form and dimensions ensure compatibility with holders designed for SNGN inserts, provided form, clearance and clamping match. Can this insert be used for internal as well as external turning? The square geometry and robust LX11 grade allow the insert to be used for both external and internal turning operations when mounted in a suitable holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120412 LX21 Wendeplatten - Tungaloy
Take advantage of the combination of Tungaloy LX21 wear resistance, the 1.2 mm corner radius for consistent surface quality and the ISO‑standard form for simple toolholder compatibility to ensure steady production. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific selection. SNGN 120412 LX21 indexable insert for turning — Tungaloy SNGN 120412 LX21 is an ISO‑standard square indexable insert designed for general turning applications; compatible holders must match form, relief, tolerance class, fastening, size and thickness ISO 120412 form for standard holders Tungaloy LX21 carbide grade 1.2 mm corner radius for robust edges 0° relief with 90° insert angle Increased tool life and predictable machining performance The Tungaloy LX21 grade combines wear resistance, toughness and edge stability, creating a reliable cutting edge that keeps tool changes predictable and reduces unplanned downtime. The insert’s ISO‑standard geometry ensures compatibility with a wide range of external holders and boring bars; this standardisation simplifies inventory and tool management across mixed‑machine shops. Because the grade is matched to the insert geometry, the result is a measurable improvement in component consistency and repeatability over multiple shifts. Consistent surface finish and flexible turning options A 1.2 mm corner radius delivers a balance between cutting edge strength and surface quality: it reduces chatter on interrupted cuts and supports reliable stock removal without excessive workhardening. The square plate form with a 12 mm size and 4.76 mm thickness allows use in both facing and light roughing passes when paired with the correct holder geometry. For customers less familiar with insert selection, a larger radius increases edge stability, while a smaller radius favours finishing — the LX21 grade helps maintain performance across these conditions. Efficient integration into existing tool systems The insert’s 90° insert angle and 0° relief provide predictable cutting forces that are easy to account for in fixture design and cycle planning. The product fits into a system comprising an indexable insert, matching external holder or boring bar, clamp/seat and replacement screws; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. Since this insert is supplied without a chipbreaker and without a hole, it suits straightforward clamping systems and allows selection of chip control strategies according to material and operation, which supports flexible process optimisation on the shop floor. Contact Metav Werkzeuge for tailored advice on applying the Tungaloy LX21 insert and to arrange supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806567 SKU: 6806567-Tungaloy Manufacturer SKU: TUN6806567 Model series: ISO turning indexable insert series Full designation: SNGN120412 LX21 Tungaloy indexable insert Material: carbide Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Insert angle: 90° Relief angle: 0° Hole: none Special features Square plate form Tungaloy LX21 grade No chipbreaker Compatible with ISO holders (form, relief, tolerance, fastening, size, thickness) Intended application: turning FAQ Which turning operations suit this insert best? This insert is designed for general external and internal turning operations; the SNGN 120412 LX21 performs well in facing, light roughing and finishing when paired with the appropriate holder and process parameters. How does the LX21 grade affect cutting performance? The LX21 grade is formulated to balance wear resistance and toughness, giving stable edge life and consistent surface finishes under typical turning conditions. Is a chipbreaker included with the insert? The insert is supplied without a chipbreaker; chip control should be selected according to the workpiece material and the chosen machining strategy. What should be checked for holder compatibility? Compatibility depends on matching the insert’s form, relief angle, tolerance class, fastening type, size (12 mm) and thickness (4.76 mm) to the holder or boring bar specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120412 TZ120 Wendeplatten - Tungaloy
Benefit from the combination of TZ120 carbide grade's wear resistance and edge stability, the ISO SNGN form for straightforward holder compatibility, and a robust 90° geometry with a 1.2 mm corner radius for reliable turning performance; order directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. SNGN 120412 TZ120 — ISO turning insert, square 12 mm, 90° SNGN120412 TZ120 is an ISO‑standard square indexable insert designed for precision external and internal turning; the insert combines a cemented carbide substrate with the TZ120 grade to balance wear resistance and toughness. ISO SNGN form for wide holder compatibility TZ120 carbide grade with high wear resistance 90° geometry for strong corner support 1.2 mm corner radius for robust turning Engineered for consistent machining and longer tool life The TZ120 cutting grade, combined with a cemented carbide substrate, provides a focused balance of wear resistance and edge stability that supports reliable production runs. This balance reduces unexpected tool-wear variability and contributes to predictable component quality, thereby supporting process efficiency and lower rework rates. The insert's engineered geometry aims to maintain a stable cutting edge under moderate to demanding turning conditions, translating technical properties into measurable productivity benefits. Seamless integration with ISO tooling systems The insert follows ISO specifications for the SNGN family, so compatibility with holders is governed by the insert's form, clearance angle (0°), tolerance class, clamping method, size and thickness. The standardised design simplifies inventory management and ensures repeatable locating and clamping in compatible toolholders. For production settings that require quick insert changes and consistent seating, the ISO designation facilitates tool‑system planning and reduces setup time while maintaining machining accuracy. Application flexibility and advantages in turning operations Designed for both external and internal turning, the square SNGN geometry and 90° corner configuration deliver sturdy support for heavier cutting engagement while the 1.2 mm corner radius helps to preserve corner integrity during interrupted cuts. The insert is supplied without a chipbreaker, offering the option to match chip control strategies to the specific workpiece material and stability of the machining setup. Where a chipformer or a different edge preparation is required, selection of a suitable chipbreaker and matching grade will tailor the cutting performance to the application and stability demands. The use of a robust carbide grade underpins repeatable surface finish and dimensional consistency in component production. For technical advice on integrating Tungaloy TZ120 inserts into existing tool systems and to arrange supply through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application-focused assistance. Technical data Article number: 5703584 SKU: 5703584-Tungaloy Manufacturer SKU: TUN5703584 Manufacturer: Tungaloy Facts Inscribed circle / size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Corner angle: 90° Special features Geometry: SNGN (square) ISO designation: SNGN120412 Carbide grade: TZ120 (Tungaloy) Material: cemented carbide Chipbreaker: none Mounting: without hole Intended application: turning (external and internal) FAQ What machining operations are suitable for this insert? The insert is intended for turning operations, specifically external and internal turning; the SNGN form and 90° geometry support robust cutting engagements. How does one ensure holder compatibility? Holder compatibility depends on form, clearance angle, tolerance class, clamping, size and thickness; matching these parameters ensures correct seating of the SNGN120412 insert. Is a chipbreaker integrated in this insert? The insert is supplied without a chipbreaker, allowing selection of a chip control solution appropriate to the workpiece material and process stability. Which features contribute to cutting-edge stability? The TZ120 grade and a 1.2 mm corner radius provide a balance of wear resistance and toughness that helps maintain edge stability under turning loads. What are the key dimensions to check when ordering? Key dimensions include the inscribed circle/size (12 mm), thickness (4.76 mm), corner radius (1.2 mm) and the 90° corner angle; these determine fit and suitability for specific holders and applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120416 FX105 Wendeplatten - Tungaloy
Benefit from the combination of wear-resistant FX105 grade, ISO-standard geometry and a 1.6 mm corner radius for reliable turning performance; order the SNGN120416 FX105 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNGN120416 FX105 ISO turning insert — 0° clearance, R1.6 carbide by Tungaloy The SNGN120416 FX105 is an ISO-standard carbide turning insert intended for external and internal turning, delivering a stable cutting edge with a 1.6 mm corner radius and a 0° clearance angle. ISO‑standard geometry for holder compatibility FX105 grade for wear-resistant performance 1.6 mm corner radius for balanced finish 0° clearance for robust cutting edge Reliable compatibility for straightforward tool setups The ISO-conformant geometry ensures predictable mounting in compatible holders: form, clearance angle, tolerance class, fastening method, size and thickness determine fit. Matching the insert to a correctly specified holder reduces setup time and minimises runout, which directly supports consistent cycle times in production. For suppliers of tooling systems and workshop managers the carbide insert’s standardised dimensions simplify inventory and replacement planning while maintaining machining precision. Consistent cutting performance and longer tool life The FX105 grade from Tungaloy combines wear resistance with edge stability, designed to resist abrasive and adhesive wear during general turning. The balanced combination of hardness and toughness helps maintain a sharp edge across longer tool life, reducing downtime for insert changes. The 0° clearance and 1.6 mm corner radius support stable cutting conditions and an even surface finish when turning medium to stable workpieces, translating into measurable productivity gains on repetitive operations. Practical guidance for turning applications Intended for turning operations, the insert performs well in both external and internal cuts when the correct chip control and grade selection are applied. Where vibration is limited and clamping is rigid, the square insert form with R1.6 provides improved corner strength and a regular profile on workpiece edges. Operators should choose chip control and cutting parameters according to workpiece material and machine rigidity to exploit the cutting-edge stability offered by the Tungaloy grade. System-level advantages and shop-floor integration Used as part of an insert‑holder‑screw system, the component integrates easily into standard turning tool assemblies and replacement strategies. The square shape and absence of a hole simplify indexation and regripping procedures while the uniform thickness contributes to consistent clamping behaviour. This predictability supports process control and reduces rejects, aligning with lean manufacturing goals and making the insert a practical choice for production-driven environments. For machining reliability with Tungaloy’s FX105 grade and ISO compatibility, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806570 Manufacturer SKU: TUN6806570 Designation: SNGN120416 FX105 ISO designation: 120416 Series: ISO-Drehwendeschneidplatten Facts Material: Carbide Insert size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Insert angle: 90° Hole: no hole Special features Grade: FX105 Carbide type: Tungaloy grade Insert form: square Chipbreaker: without chipbreaker Application: Turning (external and internal) Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What applications is this insert suited for? The SNGN120416 FX105 insert is designed for general external and internal turning; the FX105 grade offers a balance of wear resistance and edge stability suitable for many turning tasks. How does the 1.6 mm corner radius affect surface finish? A 1.6 mm corner radius on this SNGN120416 FX105 insert delivers a balanced surface profile, improving finish while providing additional corner strength compared with smaller radii. Is the insert compatible with standard ISO holders? Compatibility requires matching form, clearance angle, tolerance class, fastening, size and thickness; when these are met the insert fits ISO‑standard holders as intended. Does the grade require a specific chipbreaker? The listed version is supplied without a chipbreaker; chip control should be achieved by selecting a holder or insert variant with a suitable chipbreaker for the workpiece material and cutting conditions. What material is the insert made from? The SNGN120416 FX105 insert is manufactured from carbide, using Tungaloy’s FX105 grade to provide wear resistance and edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120416 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compliance, LX10 wear resistance and a robust 1.6 mm corner radius for consistent turning results; order via Metav Werkzeuge or request application advice from our consultants for safe integration into the production process. SNGN 120416 LX10 – Indexable Turning Insert (SNGN) by Tungaloy for Turning A SNGN120416 LX10 indexable turning insert engineered for ISO‑compliant external and internal turning operations with a 90° included angle and a 1.6 mm corner radius. ISO-compliant SNGN120416 insert LX10 grade for wear resistance Corner radius 1.6 mm for edge strength Suitable for external and internal turning Consistent machining performance for demanding turning The LX10 grade combines a wear‑resistant carbide substrate with a geometry tuned for balanced toughness and edge stability, delivering reliable cutting action in general turning operations. Used in both external and internal machining, the insert supports steady tool life and repeatable dimensional results. The ISO designation ensures interchangeability with compatible toolholders, while the square shape and 90° included angle provide predictable cutting forces and simple toolpath setup. Clear compatibility and secure toolholding Compatibility with a toolholder is determined by form, free‑clearance angle, tolerance class, fastening method, size and thickness; this insert is produced to ISO specifications to simplify selection. The 1.6 mm corner radius increases edge strength for interrupted cuts and heavier cuts, while the 4.76 mm plate thickness contributes to stable clamping. As the system comprises the indexable insert, a matching external holder or boring bar, plus seating and screws, correct pairing reduces vibration and improves surface finish. Material grade and edge stability explained The carbide composition and LX10 specification are selected to balance abrasion resistance with fracture toughness. In practice this means longer intervals between indexings compared with less robust grades, and improved resistance to chipping at the cutting edge. The absence of a dedicated chipbreaker makes the geometry suited to applications where chip form is primarily controlled by cutting parameters and coolant strategy rather than by aggressive built‑in breakers. Practical benefits and application guidance for production For shops seeking predictable cycle times and straightforward tool management, the ISO‑format insert simplifies stocking and reduces changeover risk. The square insert form allows four usable cutting edges, improving economy per insert. Typical use includes general turning of a wide range of steels and non‑ferrous alloys where the LX10 balance of wear resistance and toughness is appropriate. For best results, select the matching holder and fastening hardware according to the ISO geometry, and adjust feeds and speeds to material and setup rigidity. For application advice and fast supply of Tungaloy LX10 inserts, contact Metav Werkzeuge for tailored recommendations and delivery options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852124 Manufacturer SKU: TUN6852124 SKU: 6852124-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.6 mm Insert size: 12 mm Plate thickness: 4.76 mm Included angle: 90° Free clearance angle: 0° Special features Material: carbide Grade: LX10 (Tungaloy) Shape: square (SNGN) Hole: without hole Chipbreaker: none FAQ What materials is this insert suitable for? This Tungaloy indexable insert in grade LX10 is intended for general turning and provides good wear resistance and edge stability across a broad range of steels and common alloys. How is compatibility with a toolholder determined? Compatibility depends on form, free‑clearance angle, tolerance class, fastening method, size and thickness; matching these ISO parameters ensures the insert seats correctly and clamps securely. Can this insert be used for internal turning? Yes, the square geometry and 90° included angle allow use in both external and internal turning applications when paired with an appropriate boring bar or holder. What advantage does the 1.6 mm corner radius offer? A 1.6 mm corner radius increases edge strength for interrupted cuts and higher feed applications, reducing the risk of chipping and improving component finish under robust conditions. Does the insert include a chipbreaker? This insert is supplied without a dedicated chipbreaker; chip control is achieved through process parameters, holder choice and coolant strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120416 LX11 Wendeplatten - Tungaloy
Take advantage of a cost-effective, wear-resistant turning solution that combines cemented carbide performance with ISO compatibility for smooth production. Rely on the LX11 grade for a balanced mix of wear resistance and edge stability; order directly via Metav Werkzeuge or contact our consultants for application advice. SNGN 120416 LX11 – ISO turning insert by Tungaloy, 12 mm square The SNGN 120416 LX11 is an ISO-form indexable turning insert intended for external and internal turning, offering a robust corner radius and a 0° relief angle suited to a wide range of machining tasks. ISO turning insert SNGN120416 LX11 Cemented carbide grade LX11 12 mm square, 4.76 mm thickness 1.6 mm corner radius for robust cuts Consistent productivity from the LX11 carbide grade The LX11 cemented carbide grade is developed to deliver a reliable balance of wear resistance and toughness, which supports longer tool life in mixed-production environments. As an indexable insert, this item reduces changeover time and contributes to predictable machining cycles. The combination of the 12 mm square geometry and a 1.6 mm corner radius helps maintain stability during interrupted cuts and moderate roughing, while the ISO conformity ensures repeatable seating and clamping accuracy across matching holders. Predictable compatibility and straightforward application Produced as an ISO turning insert, the component fits systems where form, relief angle, tolerance class, clamping and thickness match the holder specification. The 0° relief angle and square shape provide a neutral cutting geometry suitable for both external and internal turning operations; selection of a chipbreaker and the LX11 grade should be guided by workpiece material and machining stability. For questions about holder compatibility or recommended cutting data, Metav Werkzeuge can supply technical guidance and supplementary data by email or phone. Practical guidance on geometry and machining outcomes The insert’s 4.76 mm thickness and absence of a central hole simplify mounting in many square-pocket clamping systems while preserving mechanical rigidity. The 1.6 mm corner radius offers a tangible increase in edge strength compared with finer radii, improving resistance to edge chipping under variable feed rates. When finishing or aiming for a finer surface, choose appropriate feeds and consider a smaller nose radius in the tool family; for heavier engagement, the present geometry supports stable chip formation and extended tool life. The LX11 composition complements this geometry by favouring predictable wear patterns and service intervals. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts, stock availability and recommended cutting data — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks Technical data Article number: 6806571 Manufacturer SKU: TUN6806571 Metav SKU: 6806571-Tungaloy Designation: SNGN120416 LX11 Numbers / Core technical data Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Relief angle: 0° Insert angle: 90° Hole: none Designs / Special features Material: cemented carbide Grade: LX11 Application: turning (external and internal) Model series: ISO turning inserts Plate shape: square Chipbreaker: none FAQ What materials is this insert suitable for? The LX11 grade cemented carbide is designed for a broad range of materials in turning; the SNGN 120416 LX11 insert is particularly suited where a balance of wear resistance and edge stability is required. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius increases edge robustness and helps prevent chipping under variable loads; the geometry of the SNGN 120416 supports more stable cuts during moderate roughing. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO form and dimensions, so compatibility depends on matching form, relief angle, tolerance class, clamping and thickness to the chosen holder. Does the insert have a central mounting hole? No, this indexable insert is supplied without a central hole, designed for clamps and pocket systems that secure square 12 mm plates. Where to get cutting data and application support? Metav Werkzeuge provides cutting recommendations and application support for the SNGN 120416 LX11 insert; contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120420 FX105 Wendeplatten - Tungaloy
Take advantage of a balanced combination of wear resistance and edge stability offered by the FX105 grade, together with the ISO square format and 2.0 mm corner radius for robust external and internal turning operations. Order the SNGN120420 FX105 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SNGN120420 FX105 ISO turning insert by Tungaloy, 90° seating A SNGN120420 FX105 ISO-format square indexable insert engineered for precision external and internal turning applications in industrial machining. ISO square insert, 90° seating angle FX105 grade: balanced wear and toughness 2.0 mm corner radius for robust cutting Carbide substrate, intended for turning operations Consistent turning performance for stable production The insert is designed as an ISO-format indexable insert, providing a predictable seating and clamping interface for standard external and internal turning holders. The 90° seating configuration promotes consistent cutting geometry, which leads to repeatable part accuracy and easier tool change procedures. With a defined corner radius of 2.0 mm, the geometry supports stable chip formation and reduces the risk of edge chipping during interrupted cuts. This stability translates into measurable production gains: fewer tool changes, more consistent cycle times and increased first-pass yield in repetitive turning tasks. FX105 grade explained: why wear resistance and toughness matter The FX105 composition is a Tungaloy-developed carbide grade that balances wear resistance and toughness, extending effective tool life across varied steels and cast materials commonly machined in turning operations. The grade complements the insert geometry to resist abrasive wear while maintaining edge integrity under thermal and mechanical load. In practice, this means less frequent indexing and fewer scrap events for components with mixed batch characteristics. The material is described as a cemented carbide substrate, optimised for industrial turning where both flank wear and chipping risk must be controlled. Practical integration: compatibility and system benefits Compatibility with the toolholder depends on the insert form, relief angle, tolerance class, clamping method, size and thickness — all ISO-determined parameters. The insert features a 0° relief angle and a plate thickness of 4.76 mm, matching common ISO holders for straightforward retrofitting into existing tool systems. The square plate form enables four usable corners per insert, improving cost efficiency per cutting edge. When integrated into the recommended system—insert, suitable external holder or boring bar, backing shim and fastening screw—the component supports rapid mounting and reliable clamping for workshop and production environments. Speak with Metav Werkzeuge about matching the Tungaloy SNGN120420 FX105 to specific holders and materials; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and rapid supply via Metav Werkzeuge Technical Data Article number: 6806573 Manufacturer SKU: TUN6806573 Model series: ISO-Drehwendeschneidplatten Label: SNGN120420 FX105 Tungaloy-Wendeplatte Numbers / Core Technical Data Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 2.0 mm Seating angle: 90° Relief angle: 0° Designs / Special Features Material: cemented carbide Grade/coating: FX105 (Tungaloy grade) Plate form: square (SNGN) Hole style: without hole Application: turning (external and internal) System: ISO indexable turning plates FAQ What materials is this insert suited for? The FX105 grade carbide insert is intended for general turning tasks; the SNGN120420 FX105 shows balanced wear resistance and toughness suitable for a wide range of steels and common cast materials in turning applications. How many cutting edges are available per insert? As a square ISO indexable insert, the SNGN120420 provides four usable cutting corners, enabling economical use before replacement. What is the corner radius and how does it affect performance? The corner radius is 2.0 mm; this radius promotes stable cutting and helps prevent edge chipping, especially suitable for medium to heavy roughing passes. Is the insert compatible with existing ISO toolholders? Compatibility is determined by insert form, thickness, seating and tolerance class; the SNGN120420 follows ISO specifications and fits holders designed for the SNGN form and 12 mm plate size. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120424 FX105 Wendeplatten - Tungaloy
Take advantage of a tried-and-tested carbide grade for dependable tool life, combined with ISO‑standard geometry and straightforward compatibility with established holder systems — order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNGN120424 FX105 SNGN — Turning insert, 2.4 mm corner radius, Tungaloy A SNGN120424 FX105 Tungaloy indexable insert engineered for precise external and internal turning in ISO systems. ISO-standard indexable insert for turning Tungaloy FX105 carbide grade for durability 2.4 mm corner radius for secure edge strength Square 12 mm plate with 0° relief angle Longer tool life through balanced grade properties The FX105 designation identifies a Tungaloy carbide grade developed to balance wear resistance and edge stability, which results in more predictable performance across a range of turning tasks. That balance reduces unplanned tool changes and supports a steadier surface finish over longer runs, delivering measurable efficiency gains in batch and continuous production. The result is a lower overall tooling cost per component through fewer interventions and consistent cycle times. Simple integration with ISO holder systems This insert conforms to the ISO series of turning plates; compatibility is ensured by matching form, relief angle, tolerance class, fastening and thickness to the toolholder. Typical system setup comprises the insert, the matching holder, a shim or clamping set and replacement screws, allowing rapid exchange and repeatable seating. Clear geometry and the standardised interface make it straightforward to fit the plate into existing tool chains, minimising set-up time. Designed for turning applications where edge security matters Intended for both external and internal turning, the plate’s square form and pronounced corner radius provide robust cutting edges suited to interrupted cuts and general turning operations. The specified 2.4 mm corner radius increases edge strength and reduces risk of chipping at the corner, while the 0° relief angle supports a neutral cutting action that can be advantageous on a wide variety of component shapes when the correct chipbreaker and cutting data are selected. Practical handling and selection advice for machinists The plate’s dimensions — 12 mm insert size and 4.76 mm thickness — combined with the standardised ISO geometry permit easy indexing and accurate repeatability after each seat change. For best results, pair the insert with a holder matching the plate thickness and tolerance class and choose a chipbreaker or substitute geometry suited to the workpiece material and stability of the set-up. For application advice or to verify suitability for a particular operation, technical consultation is available to support selection and cutting-parameter decisions. For reliable, productive turning with the Tungaloy FX105 grade, contact Metav Werkzeuge for tailored advice and rapid supply: Metav Werkzeuge can assist with holder matching, cutting data and order placement. Technical Data Article number: 6806575 Manufacturer SKU: TUN6806575 Model series: ISO‑Drehwendeschneidplatten Designation: SNGN120424 FX105 Material: Hartmetall (carbide) Facts Corner radius: 2.4 mm Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Included angle: 90° Special features ISO‑standard indexable insert for turning FX105 Tungaloy carbide grade Square plate form No hole No chipbreaker supplied Compatibility determined by form, relief angle, tolerance, fastening and thickness System components: holder, shim/clamp set, spare screws FAQ What operations is the SNGN120424 FX105 suited to? The SNGN120424 FX105 Tungaloy insert is designed for external and internal turning operations within ISO toolholder systems. How does the FX105 grade affect tool life? The FX105 grade from Tungaloy provides a balance of wear resistance and edge stability, which supports extended tool life and consistent component quality under stable cutting conditions. Which dimensions are critical when matching a holder? Key dimensions include the plate thickness (4.76 mm), plate size (12 mm) and the relief angle (0°); these must match the holder’s seat and tolerance class for secure clamping. Is a chipbreaker included with the plate? This indexable plate is supplied without a chipbreaker; the appropriate chip control solution should be selected according to material and machining strategy. Can this insert be indexed after wear? Yes, the square geometry allows multiple index positions; the 2.4 mm corner radius provides robust edge strength across successive indexes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com