SNGN 120708 LX10 Wendeplatten - Tungaloy
High-performance ISO turning insert offering a balanced mix of wear resistance and edge stability; the LX10 carbide grade and square 12 mm form provide consistent results in external and internal turning. Order the insert directly via Metav Werkzeuge or consult our advisors for application support and availability. SNGN 120708 LX10 — ISO turning insert by Tungaloy (square 12 mm, 0.8 mm radius) A versatile ISO-standard indexable insert for turning, designed for reliable external and internal machining where stable cutting edge and repeatable performance are required ISO-standard turning insert LX10 Tungaloy carbide grade Square 12 mm insert, 0.8 mm radius 90° approach angle, 0° rake angle Increase throughput with predictable wear performance The combination of the LX10 cutting grade and cemented carbide substrate delivers a dependable compromise between wear resistance and edge toughness, supporting longer tool life under mixed cutting conditions. ISO standardisation of the geometry means the insert integrates easily into existing toolholders, reducing setup time and helping to maintain cycle times. Choosing a grade optimised for turning helps to limit unscheduled tool changes and keeps production flow steady. Ensure correct mounting and application for consistent results Compatibility with the chosen holder depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. The square shape and the 0.8 mm corner radius make this insert suitable for general turning tasks and form features where a robust cutting edge is needed. If uncertain about holder fitment or the ideal chip control solution for a workpiece, Metav Werkzeuge provides technical advice and material-specific recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930 for guidance. Typical operations and process benefits Designed for both external and internal turning, this insert performs well in stable set-ups where repeatability matters. The 90° approach angle supports accurate shoulder and face machining, while the geometry of the insert allows straightforward indexability for fast seat changes. In practical terms, this means fewer interruptions for regrinding or replacement, improved surface finish consistency and easier inventory management through ISO-compatible inserts. Geometry and what the numbers mean for machining The designation SNGN120708 refers to a square-shaped insert with a nominal size of 12 mm, a thickness of 7.94 mm, a corner radius of 0.8 mm and a 0° rake angle; these parameters influence chip formation, radial engagement and cutting forces. A larger corner radius increases edge strength and can extend tool life in heavier cuts, while the zero-degree rake offers a neutral cutting action suitable for a wide range of steels and mixed-material batches. Selecting the correct chip control and matching the LX10 grade to the workpiece material will optimise both productivity and surface quality. For precise turning applications using Tungaloy’s LX10 grade, contact Metav Werkzeuge for product availability and tailored machining advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6852125-Tungaloy Manufacturer SKU: TUN6852125 Manufacturer article number: 6852125 Material: Cemented carbide Model series: ISO turning inserts Application: Turning Facts Size: 12 mm Thickness: 7.94 mm Corner radius: 0.8 mm Rake angle: 0° Approach angle: 90° Special features Grade: LX10 (Tungaloy) Chipbreaker: none Hole: without hole Shape: square ISO designation: SNGN120708 FAQ What operations is this insert intended for? This insert is intended for turning operations, covering both external and internal turning where ISO-standard indexable geometry is required. What does the LX10 grade provide? The LX10 grade is a Tungaloy carbide formulation that balances wear resistance and toughness to give stable cutting-edge performance in general turning tasks with variable cutting conditions. How is holder compatibility determined? Holder compatibility is determined by form, clearance (relief) angle, tolerance class, fastening method, insert size and thickness; ensure the holder matches the insert’s ISO geometry. Does this insert include a chipbreaker? This particular insert is supplied without a chipbreaker, which can be advantageous for certain turning strategies; chip control should be selected based on workpiece material and cutting parameters. What does SNGN120708 indicate? The ISO designation indicates a square insert (S), negative geometry (N), with size and geometry details corresponding to the 120708 code used for correct holder selection and ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120708 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of LX11 grade performance, precise ISO conformity and robust carbide construction for reliable turning cycles; order directly via Metav Werkzeuge or consult their technical advisors for process optimisation. SNGN 120708 LX11 SNGN Turning Insert – Square, 90° Cutting Angle (Tungaloy) SNGN 120708 LX11 is an ISO‑standard indexable turning insert designed for general turning tasks where edge stability and predictable wear behaviour are required. ISO standard SNGN 120708 insert Tungaloy LX11 carbide grade Square form with 90° cutting angle 0.8 mm corner radius for edge strength Consistent edge performance and wear resistance The LX11 grade, supplied by Tungaloy, pairs a wear‑resistant cemented carbide substrate with a formulation tuned to deliver a balanced combination of toughness and edge life. This balance reduces unscheduled tool changes and supports steady production cycles, making the insert particularly suitable where consistent component quality and repeatability matter. The material choice helps maintain cutting‑edge geometry under mixed cutting conditions, which in turn keeps machining times predictable and post‑process inspection requirements to a minimum. Rigidity and geometry for stable turning results A square plate with a 90° included angle and a 0.8 mm corner radius provides a robust cutting edge that tolerates intermittent cuts and offers increased edge strength compared with finer radii. The 7.94 mm thickness gives axial and radial rigidity when secured in a compatible holder, helping to reduce vibration and improve surface finish. For external and internal turning operations, this geometry supports reliable chip formation and dimensional control when paired with an appropriately selected holder and clamping set. Simple system integration and practical handling The insert is an ISO‑conforming indexable plate intended to work within a standard turning system comprising a compatible external holder or boring bar, an underlay/clamp set and replacement screws. Compatibility is determined by form, clearance angle, tolerance class, fastening style, size and thickness; this allows flexible use across many common toolholders. The design omits a chipbreaker and a centre hole, which must be considered when matching the item to clamping methods and process demands. The product is supplied as the insert itself; suitable fixtures and holders are available separately. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy LX11 insert into existing tool systems or for support in selecting the optimal grade and geometry for specific turning tasks — Metav Werkzeuge is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6806576 Manufacturer SKU: TUN6806576 SKU: 6806576-Tungaloy Model series: ISO indexable turning inserts Dimensions & geometry Size: 12 mm Thickness: 7.94 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Plate shape: square Hole: without hole Chipbreaker: none Materials & applications Material: carbide Grade / sort: LX11 (Tungaloy) Intended use: turning Typical system: external holder or boring bar, underlay/clamp set, replacement screws Compatibility criteria: form, clearance angle, tolerance class, fastening, size, thickness FAQ What is the primary application for this insert? The SNGN 120708 LX11 insert is designed for turning operations; it is intended for both external and internal turning where a square, robust cutting edge is required. Which materials is the LX11 grade suited to? The LX11 grade from Tungaloy is formulated to provide a compromise between wear resistance and toughness, supporting a broad range of turning tasks; selection of the exact grade and chipformer should match the workpiece material and machining stability. Are there any special holder requirements? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; use a holder specified for ISO SNGN inserts and ensure clamping elements match the 12 mm plate size and 7.94 mm thickness. Does this insert include a chipbreaker or centre hole? This item is supplied without a chipbreaker and without a centre hole; clamping and chip management must be planned accordingly. What is the supplier reference for reordering? The manufacturer article number is 6806576 and the manufacturer SKU is TUN6806576 for use when reordering or querying specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120708 TZ120 Wendeplatten - Tungaloy
Taking advantage of ISO standardisation and the TZ120 cutting grade ensures reproducible results and predictable tool life in turning operations; the combination of a robust carbide substrate, a 90° square geometry and a 0.8 mm corner radius supports stable cutting and fine finishing. Order the insert via Metav Werkzeuge or consult their specialists for matching holders and clamping components. SNGN120708 TZ120 Tungaloy indexable insert for turning — ISO 90° square, 0.8 mm corner radius The SNGN120708 TZ120 is an ISO-form indexable insert intended for external and internal turning, offering a balanced combination of wear resistance and edge stability for industrial metalcutting. ISO-compatible square insert 90° geometry Tungaloy TZ120 grade for wear resistance Carbide substrate for consistent cutting life 0.8 mm corner radius for fine turning Engineered for consistent, productive turning The insert is part of an ISO series designed to deliver repeatable performance in serial production and jobbing environments. The TZ120 grade complements the geometry to provide a balance between wear resistance and toughness, which reduces the frequency of tool changes and supports steady cycle times. The 90° format gives rigidity for shoulder cuts, while the 0.8 mm corner radius helps to achieve improved surface finishes without sacrificing edge life. These properties make this cutting element suitable where consistent dimensional tolerances and predictable tool behaviour are required. Compatibility and mounting for reliable integration Compatibility with toolholders is governed by form, clearance angle, tolerance class, clamping method, size and thickness; correct matching ensures secure seating and repeatable positioning. The insert is square with no centre hole and a plate thickness of 7.94 mm, so it requires a holder designed for SNGN-type plates and the ISO designation 120708. Typical system components include a compatible external holder or boring bar, a backing shim or clamping kit and replacement clamping screws, enabling straightforward replacement and minimising machine downtime. Material selection and the benefits of the cutting grade Manufactured from a wear-resistant carbide substrate and finished in Tungaloy’s TZ120 grade, the insert is optimised for a wide range of steels and mixed production duties. The grade supports stable chip formation and edge stability, which is particularly valuable when machining varying batch sizes or interrupted cuts. By combining a robust substrate with a tailored cutting grade, the design lowers the risk of premature edge failure and supports reproducible surface quality across shifts and operators. Typical uses and operational advantages Suitable for both external and internal turning, the plate performs well in general turning operations where medium to high stability is available. The 90° geometry offers rigidity on shoulder operations and the smaller corner radius aids in achieving tighter radii and better finishes on turned parts. Absence of a chipbreaker requires selection of cutting parameters matched to material and rigidity; when paired with correct inserts and holders, the system supports efficient material removal and predictable tool change intervals, improving process reliability on the shop floor. For reliable Tungaloy performance and assistance in selecting the correct holder or clamping kit, contact Metav Werkzeuge for technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6118737 SKU: 6118737-Tungaloy Manufacturer SKU: TUN6118737 Product designation: SNGN120708 TZ120 Model series: ISO turning indexable inserts Material: carbide Grade: TZ120 Brand: Tungaloy Intended application: turning Numbers / Core technical data Plate size: 12 mm Plate thickness: 7.94 mm Corner radius: 0.8 mm Clearance angle: 0° Geometry angle: 90° ISO code: 120708 Centre hole: none Designs / Special features Square plate form No chipbreaker supplied ISO conformity for reproducible positioning Compatibility depends on form, clearance, tolerance, clamping, size and thickness System requires compatible holder or boring bar, backing shim/clamping kit and replacement screws Suitable for external and internal turning FAQ What materials can this insert machine effectively? The SNGN120708 TZ120 indexable insert from Tungaloy is optimised for a broad range of steels and general-purpose turning applications, offering a balance of wear resistance and edge stability. How does the 0.8 mm corner radius affect finish and strength? A 0.8 mm corner radius on the insert improves surface finish and reduces the likelihood of edge chipping during moderate cutting; the Tungaloy grade helps maintain edge integrity under standard turning feeds. Is a chipbreaker included with this insert? This particular plate is supplied without a chipbreaker; chip control must therefore be achieved by parameter optimisation, holder selection and, if needed, use of appropriate coolant strategies. Which holder type is compatible with the plate geometry? Compatibility depends on the holder accepting SNGN-form, ISO 120708 plates with 12 mm size and 7.94 mm thickness; matching by form, clearance angle and clamping style is essential for secure mounting. What is the manufacturer SKU for ordering reference? Ordering and inventory reference for this Tungaloy turning insert is SKU 6118737-Tungaloy or manufacturer SKU TUN6118737. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120712 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of the multidirectional AddMultiTurn system, a robust FX105 carbide grade and a 1.2 mm corner radius for consistent productivity and predictable tool life; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SNGN 120712 FX105 Turning insert — 90° square form, 1.2 mm corner radius, Tungaloy SNGN120712-T1 FX105 is a square indexable insert developed for multidirectional turning and facing operations, optimised for stable cutting performance in a variety of general turning tasks. Multidirectional AddMultiTurn system FX105 carbide grade for wear resistance Square 90° geometry with 1.2 mm radius T1 chipbreaker for general turning Increase throughput with fewer tool changes The AddMultiTurn system integrates a multidirectional turning concept that allows one insert to perform several cutting directions, thereby reducing the number of tool changes and machine downtime. The square 90° geometry with a 1.2 mm corner radius supports robust edge strength while providing predictable part dimensions during longitudinal turning and facing. The combination of geometry and grade reduces process interruptions, which results in improved cycle times and higher overall equipment effectiveness. Stable edge life and reliable chip control The Tungaloy FX105 grade is a purpose‑built carbide composition that balances wear resistance and toughness to maintain cutting edge stability over extended runs. The T1 chipbreaker has been designed to promote consistent chip formation under varied feeds, which improves surface finish and reduces the risk of entangling chips. The insert’s solid carbide substrate contributes to repeatable performance and a reliable tool life in typical turning applications. Easy integration into existing toolholding systems The plate is supplied in the SNGN120712-T1 geometry to match standard square indexable holders in the AddMultiTurn family; the system combines the insert, a secure clamping system and compatible holders for simple setup. With a plate thickness of 7.94 mm and a nominal plate size of 12 mm, the insert fits common tool blocks and ensures consistent seat and stability. The lack of a central hole simplifies indexing and clamping choices for compatible fixtures. Suitable for varied turning tasks and predictable results Designed for longitudinal, facing and profiling operations, this insert performs well in general turning where a balance of wear resistance and edge stability is required. The defined corner radius and the square form help to maintain contour accuracy on profiles while the chipbreaker supports smooth evacuation. For applications requiring multidirectional cuts with a single tool body, this insert provides a practical, production‑oriented solution. For precision multidirectional turning, rely on Tungaloy’s FX105 inserts — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and technical advice Technical data Article number: 6806577 SKU: 6806577-Tungaloy Manufacturer SKU: TUN6806577 Facts Corner radius: 1.2 mm Plate size: 12 mm Plate thickness: 7.94 mm Clearance angle: 0° Cutter angle: 90° Special features Material: cemented carbide Grade: FX105 (Tungaloy) Chipbreaker: T1 Plate form: square Hole style: without hole Model series: AddMultiTurn Typical application: turning (longitudinal, facing, profiling) FAQ What machining tasks is this insert intended for? The SNGN120712-T1 FX105 indexable insert from Tungaloy is intended for multidirectional turning, including longitudinal, facing and profiling operations, where a balanced combination of wear resistance and edge stability is required. How does the T1 chipbreaker affect performance? The T1 chipbreaker on this Tungaloy insert promotes compact, controllable chips during general turning operations, improving surface finish and reducing chip interference in the cutting zone. Is a central hole required for clamping the insert? No, this insert is supplied without a hole; it is compatible with clamping systems designed to secure SNGN‑format plates within the AddMultiTurn toolholders. Which geometry and corner radius does the plate use and why does that matter? The plate uses a square 90° geometry with a 1.2 mm corner radius; this combination increases edge strength for robust cuts and supports consistent contour accuracy during profiling. Can this insert be used across different toolholders in the AddMultiTurn family? Yes, the SNGN120712-T1 design is part of the AddMultiTurn system and is intended to integrate with compatible holders and the clamping system to provide consistent seating and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120712 LX10 Wendeplatten - Tungaloy
Benefit from the combination of LX10 wear resistance, a robust 1.2 mm corner radius and stable chip control for uninterrupted multi-directional turning; order directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. SNGN 120712 LX10 Tungaloy indexable insert for turning — 90° square, 1.2 mm radius The SNGN120712-T1 LX10 indexable insert is a carbide cutting solution for multi-directional turning, optimised for longitudinal, facing and profile operations. LX10 grade for balanced wear and toughness 1.2 mm corner radius for profile control Square 90° geometry for robust side cutting Compatible with AddMultiTurn multi-directional system Maximise uptime with a multi-directional turning strategy The AddMultiTurn concept enables multi-directional machining with a single toolholder, reducing tool changes and machine downtime. As a result, cycle times are shortened and set-up routines are simplified. The insert’s design supports longitudinal, facing and profile turning sequences, which means one tooling strategy can cover several operations. This approach favours predictable tool life and improved process reliability, making the component suitable for production environments where consistent throughput and fewer tool interventions are priorities. Stable cutting performance through balanced grade and chip control The Tungaloy LX10 carbide grade pairs wear resistance with sufficient toughness to withstand variable cutting forces encountered in turning. The integrated chipbreaker T1 promotes controlled chip formation, reducing the risk of built-up edge and improving surface finish consistency. The 1.2 mm corner radius and 90° square geometry deliver a robust cutting edge that resists chipping under interrupted cuts, while the carbide substrate maintains stability at elevated feed rates. These features translate into a tangible reduction in scrap rates and rework. Easy integration and repeatable results in production Designed for a system build-up of holder, interchangeable inserts and a clamping mechanism, this insert fits into established toolholder families that support the AddMultiTurn series. The square plate with a 12 mm size and 7.94 mm thickness offers repeatable seating and simple inventory handling. A geometry with 0° free angle and no centre hole keeps mounting straightforward and predictable. The combination of standardised dimensions and a consistent cutting edge reduces set-up variability and supports reproducible part quality across batches. For application advice on Tungaloy LX10 inserts and to secure the right inserts for your production needs, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and stock availability Technical data Article number: 6852126 SKU: 6852126-Tungaloy Manufacturer SKU: TUN6852126 Model series: AddMultiTurn Designation: SNGN120712-T1 LX10 Facts Corner radius: 1.2 mm Geometry: 90° Plate size: 12 mm Plate thickness: 7.94 mm Free angle: 0° Special features Material: carbide Grade: LX10 (Tungaloy) Chipbreaker: T1 Plate form: square Hole: none Application: turning System build-up: holder, interchangeable inserts and clamping system FAQ What turning operations is this insert suited for? The SNGN120712-T1 LX10 indexable insert is intended for longitudinal, facing and profile turning within multi-directional setups. Which carbide grade does the insert use and what does it offer? The insert is made in Tungaloy’s LX10 grade, providing a balance of wear resistance and toughness that supports reliable cutting performance in turning applications. What are the key dimensions and geometry of the insert? The insert features a 12 mm plate size, 7.94 mm thickness, a 1.2 mm corner radius and a 90° square form; it has no centre hole and a free angle of 0°. Is the insert compatible with multi-directional tool systems? Yes, the insert was developed for the AddMultiTurn multi-directional turning system and integrates into toolholders that accept SNGN-style plates. How does the chipbreaker affect machining results? The T1 chipbreaker on the SNGN120712-T1 LX10 insert promotes stable chip formation, which helps maintain surface finish and reduces the likelihood of edge build-up during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120712 LX11 Wendeplatten - Tungaloy
The combination of the LX11 Tungaloy grade, a 1.2 mm corner radius and a square 12 mm form delivers robust chip control and consistent surface quality for turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. SNGN120712-T1 LX11 square 12 mm indexable turning insert, 1.2 mm radius — Tungaloy The SNGN120712-T1 LX11 is a square indexable insert designed for multidirectional turning within the AddMultiTurn system, suited to longitudinal, facing and profile turning operations. Multidirectional machining compatible Carbide grade LX11 for wear resistance 1.2 mm corner radius for profile work Square 12 mm insert, 90° lead angle Maximise metal removal with predictable performance The AddMultiTurn concept places a strong emphasis on stable, repeatable cutting. By combining a carbide substrate with the LX11 grade, the insert offers a balance of wear resistance and edge toughness that reduces unexpected tool changes and variances in cycle times. The 1.2 mm corner radius helps distribute cutting forces and smooths the transition in profile turning, which limits chatter and supports a steady material removal rate. For practical terms: a larger corner radius increases insert life on interrupted cuts and improves finish on radiused contours. Flexible geometry for multiple turning directions A multidirectional insert simplifies tooling setups by permitting several cutting orientations with one part. The square 12 mm form and the 90° lead angle enable secure positioning in holders configured for longitudinal, face and profile turning; the right-angle geometry promotes predictable chip flow and contact conditions. The integrated T1 chipbreaker has been optimised for common turning feeds, guiding chips away from the cutting edge to reduce re-cutting and enhance surface integrity. This versatility shortens downtime for tool changes and eases programme planning on mixed-production lathes. Consistent results through grade and clamping reliability The insert’s LX11 composition, developed by Tungaloy, provides reliable edge stability under varying cutting speeds and materials, benefitting workshops that require reproducible part quality. The square plate design without a hole simplifies clamping and minimises variability in seating; when combined with the AddMultiTurn holder and clamping system, it enables secure, repeatable indexing. Where surface finish and dimensional repeatability matter, this solution supports longer production runs with fewer interventions and predictable maintenance cycles. For reliable turning with Tungaloy’s LX11 grade and the AddMultiTurn concept, consult Metav Werkzeuge for tailored holder recommendations and prompt supply — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6806578 Manufacturer SKU: TUN6806578 Brand: Tungaloy Model series: AddMultiTurn Material: Carbide Facts Insert size: 12 mm Corner radius: 1.2 mm Plate thickness: 7.94 mm Lead angle: 90° ISO designation: 120712 Special features Square plate form Chipbreaker: T1 No hole design Grade: LX11 Intended use: Turning (longitudinal, facing, profile) System compatibility: Multidirectional AddMultiTurn holders FAQ What materials can this insert machine effectively? The LX11 grade in this insert is formulated for a broad range of steels and offers good wear resistance and edge stability when used in turning operations. Is the insert suitable for profile turning and face turning? Yes. The square 12 mm geometry and 1.2 mm corner radius permit profile, face and longitudinal turning within the AddMultiTurn system. How is chip control achieved with this insert? Chip control relies on the integrated T1 chipbreaker geometry and the LX11 grade; together they guide chips away from the cutting zone and help prevent re-cutting. Does the insert require a central hole for clamping? No. This design is a no-hole, square insert intended to be clamped securely in the AddMultiTurn holder. What is the full article identification for ordering? Order using article number 6806578 or manufacturer SKU TUN6806578 for the SNGN120712‑T1 LX11 indexable turning insert from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120712 TS300 Wendeplatten - Tungaloy
Combining the TS300 grade with a square 90° geometry and a 1.2 mm corner radius delivers stable cutting performance and predictable edge life in multidirectional turning applications. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. SNGN120712-T1 TS300 — Tungaloy indexable insert for turning, 90° geometry, 1.2 mm radius The SNGN120712-T1 TS300 is a square carbide indexable insert designed for multidirectional turning within the AddMultiTurn system, suitable for longitudinal, facing and profile turning. Multidirectional turning capability TS300 grade for wear resistance Square 12 mm insert, 1.2 mm corner radius Increased process stability for multidirectional turning The AddMultiTurn system paired with a square 12 mm insert and 7.94 mm thickness provides a rigid cutting edge that reduces chatter and improves dimensional stability across varying cut directions. The 90° lead angle gives a strong cutting face for interrupted cuts and shoulder machining, while the absence of a central hole means clamping relies on a direct seat and robust clamp design. Together, these attributes enable consistent machining results when parts require changes in feed direction or when one tool must cover several turning operations. Longer edge life through the TS300 grade The Tungaloy TS300 carbide grade balances wear resistance, toughness and edge stability to extend the interval between indexing events. That combination is particularly advantageous for mixed-material batches or operations where tool changes disrupt flow. As a result, the cutting edge retains form for longer, lowering the frequency of intervention and contributing to a more predictable production rhythm while maintaining surface quality. Geometry optimised for chip control and surface finish The chipbreaker T1 geometry is tuned to support reliable chip formation during longitudinal, facing and profile turning, reducing the risk of built-up edge and erratic chips. With a 1.2 mm corner radius the insert offers improved edge strength for semi-finishing and finishing passes, helping to maintain roundness and feature fidelity. The 0° free angle steers the cutting mechanics toward steady contact and consistent cutting forces; correct feed direction and appropriate toolholder selection should be observed to achieve the stated performance. Easy integration and predictable handling in the toolroom Product integration is straightforward: the insert fits standard square pockets designed for 12 mm plates and is compatible with the AddMultiTurn holders that accept the SNGN shape and T1 chipbreaker. Labelling and traceability are clear thanks to the manufacturer and SKU identifiers, which assist inventory control and reordering. For shops seeking to consolidate tool inventories, the stable performance of this insert supports fewer variants while covering a broad range of turning tasks. For application-specific recommendations or to order genuine Tungaloy inserts contact Metav Werkzeuge today via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 for prompt technical support and supply details Technical data Article number: 6153255 SKU: 6153255-Tungaloy Manufacturer SKU: TUN6153255 Dimensions & numeric data Plate size: 12 mm Plate thickness: 7.94 mm Corner radius: 1.2 mm Lead/approach angle: 90° Free clearance angle: 0° Design & features Designation: SNGN120712-T1 TS300 Material: carbide Grade: TS300 (Tungaloy) Chipbreaker: T1 Plate form: square Hole: without hole Model series: AddMultiTurn Application: turning (longitudinal, facing, profile) FAQ What types of turning operations suit this insert best? The SNGN120712-T1 TS300 insert is intended for longitudinal, facing and profile turning where multidirectional capability is required; it performs well in operations that demand a robust 90° geometry and steady chip control. How does the TS300 grade affect tool life? TS300 provides a balance of wear resistance and toughness, which helps the cutting edge maintain integrity under mixed cutting conditions and extends the interval between indexings compared with less resilient grades. Is this insert compatible with holders for square 12 mm plates? Yes — the insert is a square 12 mm plate designed to seat in standard pockets for SNGN-style inserts; ensure the holder supports the AddMultiTurn system and the T1 chipbreaker geometry. What is the purpose of the T1 chipbreaker? The T1 chipbreaker promotes predictable chip formation and evacuation during turning, reducing the risk of long, tangled chips and supporting consistent surface finishes during finishing and semi-finishing passes. Are there special recommendations for clamping or mounting this insert? Because the plate is supplied without a central hole, correct seat geometry and a secure clamp are essential; follow holder manufacturer guidelines and observe the recommended feed direction for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120712 TZ120 Wendeplatten - Tungaloy
Take advantage of the combination of TZ120 cutting-grade durability, a 1.2 mm corner radius and a robust 90° geometry for consistent shoulder and profile turning; order directly via Metav Werkzeuge or consult the team for application support. SNGN 120712 TZ120 – SNGN120712-T1 indexable insert for turning by Tungaloy The SNGN120712-T1 is a square indexable insert engineered for multidirectional turning within the AddMultiTurn system, suited to longitudinal, face and profile turning operations. TZ120 grade for balanced wear resistance 90° geometry for reliable shoulder turning Corner radius 1.2 mm for strengthened cutting edge Compatible with AddMultiTurn multidirectional system Consistent edge life and process reliability The insert delivers stable cutting performance thanks to the TZ120 grade, a Tungaloy carbide formulation that balances wear resistance and toughness. This composition improves edge stability, reducing flank wear and the need for frequent indexing. For production environments where reproducible part quality matters, the hardened cutting edge and corner radius 1.2 mm help maintain consistent dimensional accuracy during repeated shoulder and profile cuts. The result is fewer unplanned tool changes and a smoother production flow. Designed for multidirectional turning and simple tool integration Built for the AddMultiTurn multidirectional system, the geometry supports several cutting directions with a single insert, simplifying tool management in mixed-turning setups. The square 12 mm format and 90° lead angle make the insert suitable for shoulder work and general-purpose turning, while the T1 chipbreaker offers controlled chip formation in typical turning feeds. The square form factor and standard mounting interface enable quick insert replacement and straightforward integration into existing holders and clamping systems. Material versatility and practical benefits at the machine Manufactured from carbide and optimised for turning, the design suits a broad range of steels and common workshop materials encountered in conventional turning. The 0° relief angle and robust cutting edge support steady engagement in longitudinal and facing operations. For users with limited technical background, the chipbreaker designation T1 describes a geometry tuned to produce short, manageable chips under medium feeds, which enhances machining safety and reduces downtime from chip entanglement. Contact Metav Werkzeuge for tailored application advice on the Tungaloy SNGN120712-T1 insert and to arrange supply or delivery from stock Technical Data Article number: 5703586 Manufacturer SKU: TUN5703586 SKU: 5703586-Tungaloy Model series: AddMultiTurn Core data Corner radius: 1.2 mm Insert size: 12 mm Plate thickness: 7.94 mm Geometry angle: 90° Relief angle: 0° Design and features Carbide material Grade: TZ120 Chipbreaker: T1 Square insert form No hole Intended use: turning System use: multidirectional turning system (AddMultiTurn) FAQ What operations is this insert intended for? The SNGN120712-T1 insert is intended for longitudinal turning, facing and profile turning within multidirectional setups using the AddMultiTurn system. Which material groups are suitable for this grade? The TZ120 grade in this insert is engineered to balance wear resistance and toughness, making it suitable for a wide range of steels and general-purpose turning tasks. How does the chipbreaker T1 affect performance? The T1 chipbreaker on this indexable insert promotes controlled, short chips at typical turning feeds, improving chip evacuation and machine uptime. Can the insert be used for shoulder and profile finishing? Yes, the 90° geometry and 1.2 mm corner radius provide the edge strength and geometry needed for reliable shoulder turning and profile work with consistent surface quality. Is the insert compatible with standard square toolholders? The insert’s square form and standard dimensions are compatible with holders designed for SNGN-style inserts and the AddMultiTurn clamping concept. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120716 FX105 Wendeplatten - Tungaloy
Balance robust cutting performance and process reliability with the FX105 grade and 90° SNGN geometry; the cemented carbide construction and 1.6 mm corner radius deliver stable cutting edges and extended tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored application support. SNGN 120716 FX105 SNGN indexable turning insert — 90° square, 1.6 mm radius — Tungaloy SNGN 120716 FX105 is an ISO‑standard indexable turning insert developed for general external and internal turning operations in industrial machining. ISO SNGN 120716 geometry, 90° cutting angle Tungaloy FX105 grade, wear-resistant carbide 1.6 mm corner radius for robust edge strength 7.94 mm thickness, square 12 mm insert Durable edge for repeatable production performance The FX105 grade combines wear resistance and balanced toughness to maintain a stable cutting edge during extended cycles. Constructed from cemented carbide, this insert resists abrasive wear while retaining cutting edge integrity under varying cutting forces. The 90° square geometry with a 1.6 mm corner radius provides a compromise between strength and versatility, reducing the risk of chipping when machining interrupted cuts or heavier cross sections. The result is fewer insert changes, improved uptime and predictable tool life in serial production. ISO compatibility simplifies toolset selection Designed as an ISO‑standard indexable insert, the SNGN120716 finds compatibility with a wide range of external holders and boring bars when matched by form, relief angle, tolerance class, clamping method, size and thickness. The free angle of 0° and the square plate format allow straightforward pairing with established clamping systems; a correctly selected holder and shim set convert the insert’s material properties into consistent part quality. This standardisation shortens setup times and streamlines inventory management for workshop environments. Process stability through geometry and material choice The square plate form and nearly 8 mm thickness contribute to mechanical stability at the cutting zone, while the balanced carbide microstructure of the grade supports reliable chip formation across common steels and alloyed materials. Although no specific chipbreaker is fitted, selecting an appropriate insert geometry and matching the FX105 grade to the workpiece and feed conditions achieves controlled chip flow and improved surface finish. This measured approach enhances productivity and reduces the likelihood of poor surface quality or unscheduled rework. Practical guidance for integration and selection When specifying the SNGN120716 FX105 insert, consider the full system: indexable insert, suitable external holder or boring bar, shim/clamping set and replacement screws. Compatibility is governed by plate form, corner radius, relief angle and thickness; matching these ensures secure seating and torque distribution during cutting. For general turning, the combination of cemented carbide construction and FX105 metallurgy offers a cost‑effective choice where process reliability and consistent tool life are priorities. For specific application advice or rapid supply of Tungaloy inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed recommendations and order processing Technical data Article number: 6806579 Manufacturer SKU: TUN6806579 Label / SKU: 6806579-Tungaloy ISO designation: 120716 Facts Corner radius: 1.6 mm Cutting angle: 90° Clearing angle (relief): 0° Thickness: 7.94 mm Insert size: 12 mm Special features Grade: FX105 (Tungaloy) Material: cemented carbide Plate form: square Hole: without hole Series: ISO indexable turning inserts Typical application: turning (external and internal) System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The SNGN 120716 FX105 insert in Tungaloy carbide is intended for general turning applications and performs well on a broad range of steels and alloyed materials when the correct grade and geometry are selected. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge strength for interrupted cuts and heavier cross sections, trading a small reduction in finish potential for enhanced robustness and longer tool life. Is this insert compatible with standard ISO holders? Yes. The insert follows ISO geometry conventions; compatibility depends on shape, relief angle, tolerance class, clamping method, size and thickness—use matching holders and shim sets for secure mounting. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker; achieving controlled chip flow depends on selecting the appropriate grade, feed, speed and holder geometry for the workpiece material. Which Tungaloy grade is this and what advantage does it bring? The grade is FX105 by Tungaloy, engineered to balance wear resistance and toughness for consistent edge stability and predictable performance in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120716 LX10 Wendeplatten - Tungaloy
Take advantage of the insert's ISO conformity, robust LX10 grade and compact geometry for dependable turning performance; order through Metav Werkzeuge or request technical clarification from the sales team for fast integration into existing tooling systems. SNGN120716 LX10 indexable turning insert — 90° geometry, 1.6 mm radius — Tungaloy The SNGN120716 LX10 is an ISO-standard indexable insert designed for turning, intended for both external and internal machining where predictable cutting behaviour and edge stability are required. ISO SNGN geometry for wide holder compatibility LX10 grade: balanced wear resistance and toughness 90° cutting edge for versatile external/internal turning Carbide construction for stable cutting performance Predictable assembly and holder compatibility for rapid tool changes The insert is built to the ISO SNGN form, which ensures consistent fitment with compatible clamping systems and external holders. The combination of the square plate form and a defined 90° cutting edge simplifies set-up, while the 1.6 mm corner radius provides a clear reference for cutting engagement and edge strength. This predictable interface reduces downtime during insert changes and helps maintain repeatable part geometry across batches. Balanced wear resistance and edge stability with the LX10 grade Tungaloy's LX10 grade blends wear resistance and toughness to maintain a durable cutting edge under mixed cutting conditions. As a carbide composition selected for turning, the grade reduces flank wear and supports longer tool life in interrupted cuts and steady finished passes. The material selection provides a reliable compromise between abrasion resistance and chipping resistance, leading to consistent surface finishes and fewer unexpected tool changes. Flexible use in external and internal turning without an integrated chipbreaker Designed for general turning tasks, the plate is supplied without a chipbreaker, allowing the geometry to be matched to the workpiece, cutting parameters and set-up rigidity. Compatibility with appropriate holders, shims and clamping kits is determined by form, clearance angle and plate thickness, so the insert integrates into existing tool systems where customised chip control solutions are preferred. The absence of a preset chipbreaker supports tailored chip management strategies for different materials and operations. Robust performance for repeatable machining and process security The compact plate thickness and square shape deliver stable cutting conditions when combined with a suitable external holder and correct clamping. This results in reduced vibration, improved edge life and stable results across production runs. Where process reliability and predictable wear patterns are priorities, the combination of ISO geometry and the LX10 grade supports efficient production and straightforward inventory handling for indexable inserts. For product availability, grade compatibility advice or to integrate Tungaloy inserts into existing tooling systems, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — sales consultants provide application-focused guidance and delivery options. Technical Data Article number: 6852140 Manufacturer SKU: TUN6852140 SKU: 6852140-Tungaloy Product designation: SNGN120716 LX10 Tungaloy insert Material: carbide Grade: LX10 Brand: Tungaloy Specifications Plate size: 12 mm Plate thickness: 7.94 mm Corner radius: 1.6 mm Cutting angle: 90° Clearance angle: 0° Hole: without hole Special features ISO SNGN plate form, quadrilateral geometry No chipbreaker Intended application: turning (external and internal) Compatible with standard external holders, shims and clamping sets Tungaloy grade LX10 for balanced wear/toughness FAQ What machining tasks is this insert intended for? The SNGN120716 LX10 insert is designed for turning operations, suitable for both external and internal turning when combined with the correct holder and clamping components. Does the insert include a chipbreaker? No, the insert is supplied without a chipbreaker; chip control should be achieved via holder selection, cutting parameters or by choosing an insert with an appropriate chipbreaker for the application. Which holder types are compatible with this insert? Compatibility depends on the ISO SNGN form, clearance angle, tolerance class and plate thickness; the insert fits standard holders designed for SNGN 120716 geometry. What are the key benefits of the LX10 grade? The LX10 grade from Tungaloy offers a balance of wear resistance and toughness, promoting longer edge life and consistent surface quality in varied turning conditions. Can this insert be used for heavy interrupted cuts? The carbide composition and 1.6 mm corner radius provide edge strength suitable for many interrupted cutting scenarios, though final suitability depends on machining parameters and set-up rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120716 LX11 Wendeplatten - Tungaloy
Reliable turning performance results from the combination of LX11 cutting grade and a carbide substrate, delivering stable cutting edges and consistent wear behaviour; the ISO geometry with a 1.6 mm corner radius supports both external and internal turning. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. SNGN120716 LX11 Turning insert — square ISO insert for turning, Tungaloy The SNGN120716 LX11 is an ISO-standard square turning insert designed for general external and internal turning, offering a balanced mix of wear resistance and edge stability for industrial machining. ISO SNGN 120716 geometry for standard holders LX11 Tungaloy grade for balanced wear resistance Square insert with 1.6 mm corner radius Compatible with external and internal turning Consistent edge life from material and geometry The combination of the LX11 grade and a carbide substrate provides a predictable wear profile and improved edge stability under varied cutting conditions. The chosen cutting material is engineered to balance wear resistance with sufficient toughness, which reduces the frequency of unexpected tool changes and supports steady production runs. A 1.6 mm corner radius increases edge strength and helps dampen vibration in interrupted cuts, thereby improving surface finish and reducing the risk of chipping. This results in a clear benefit: fewer indexings and more uninterrupted machine time, contributing directly to process efficiency. Reliable compatibility and holder considerations As an ISO SNGN120716 insert, compatibility with toolholders is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The insert is a square insert with 0° clearance, which suits many standard holder geometries and provides a neutral cutting profile that can be used for both roughing and semi-finish operations depending on the chosen holder and cutting data. When selecting a holder, match the tolerance class and clamp system to ensure stable clamping and repeatable positioning; correct matching reduces chatter and preserves the insert’s cutting edge integrity. System approach for predictable production The insert is intended to be used within a complete system: a matching external holder or boring bar, appropriate shim or clamp set, and replacement screws form the setup. This system view supports process reliability and easier inventory planning: standardised ISO geometry simplifies holder interchangeability and reduces the need for specialised components. The robust edge performance of the LX11 grade promotes stable cutting and predictable chip formation, which in turn helps maintain consistent part tolerances and surface quality across batches. Contact Metav Werkzeuge for tailored application advice or to order the SNGN120716 LX11 insert; our consultants can advise on holder compatibility, cutting data and system setup to optimise productivity. Technical data Article number: 6806580 SKU: 6806580-Tungaloy Manufacturer SKU: TUN6806580 Material: carbide Series: ISO-Drehwendeschneidplatten Application: turning Shape: square Facts Corner radius: 1.6 mm Plate thickness: 7.94 mm Plate size: 12 mm ISO code: 120716 Clearance angle: 0° Insert angle: 90° Special features LX11 Tungaloy grade ISO-standard SNGN geometry No hole (without centre hole) Intended for external and internal turning Compatibility determined by form, clearance, tolerance, fixing, size and thickness System components: compatible holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suitable for? The LX11 grade and carbide substrate are designed to offer a balanced performance across a wide range of materials commonly encountered in turning operations; select the matching chipbreaker and cutting data for optimal results. How does the 1.6 mm corner radius affect cutting? A 1.6 mm corner radius increases edge strength, reduces chipping risk and helps achieve a consistent surface finish in both external and internal turning. Is the insert compatible with standard ISO holders? Yes, the insert follows the ISO SNGN120716 geometry; compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness. Can the insert be used for finishing operations? With appropriate holder geometry and cutting parameters, the insert can be applied for semi-finish work; the LX11 grade provides a compromise between wear resistance and toughness to support a range of operations. What is the manufacturer article number and where is it from? The manufacturer article number is 6806580 (SKU 6806580-Tungaloy) and the insert is supplied by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120716 TZ120 Wendeplatten - Tungaloy
Combining high wear resistance and reliable edge stability with ISO compatibility, the SNGN120716 TZ120 insert ensures consistent turning performance and predictable chip control; its 1.6 mm corner radius and 0° clearance provide robust engagement for both roughing and finishing. Order the SNGN120716 TZ120 insert directly via Metav Werkzeuge or ask our consultants if needed. SNGN120716 TZ120 — SNGN indexable turning insert for Turning, Tungaloy The SNGN120716 TZ120 is an ISO-standard indexable turning insert designed for external and internal turning, combining a balanced carbide grade with a square geometry for stable cutting in general turning operations. ISO SNGN geometry, 90° cutting angle TZ120 Tungaloy grade for wear resistance 1.6 mm corner radius for robust cuts Square insert 12 mm, thickness 7.94 mm Consistent production through a wear‑resistant grade The insert uses the TZ120 Tungaloy grade in a hard carbide base, developed to balance wear resistance and toughness for extended tool life. As an ISO indexable insert, the geometry and tolerance align with standard SNGN seats, which simplifies toolholder selection and tool changeovers. This combination reduces unscheduled downtime and contributes to a predictable production rhythm, making the solution particularly suitable where repeatable machining quality and cycle-time stability are required. Stable cutting and predictable edge behaviour With a 1.6 mm corner radius and a square SNGN profile, the design delivers improved edge support and reduced vibration during engagement. The 0° clearance improves contact geometry for axial operations, while the insert thickness of 7.94 mm and a nominal size of 12 mm ensure a robust cutting edge that tolerates higher feed rates without premature chipping. These characteristics translate into fewer insert changes and a more consistent surface finish on turned components. Seamless integration into ISO tool systems Compatibility is determined by form, clearance angle, tolerance class, fastening style, size and thickness; the insert is intended to be used with a matching external holder or boring bar, a suitable shim/clamp set and replacement screws as required. As an indexable plate without a central hole and without a chipbreaker, the insert is best paired with holders designed for secure clamp fixation and with a chip control strategy adapted to the workpiece material and process stability. The modular nature of the system supports flexible tooling layouts and straightforward inventory management. Economic machining through balanced properties The carbide grade and geometry of this plate offer a pragmatic balance between cost-efficiency and performance: sufficient toughness to resist edge breakage while maintaining resistance to abrasive wear. For many turning operations, this yields lower overall tooling costs per component by extending edge life and preserving dimensional accuracy over longer cuts. The pedigree of the material and coating strategy contributes to process reliability, supporting steady productivity in series production and jobbing alike. Contact Metav Werkzeuge for availability and application guidance on Tungaloy TZ120 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 5703587 Manufacturer SKU: TUN5703587 SKU: 5703587-Tungaloy Series: ISO turning indexable inserts Grade: TZ120 Facts Geometry: SNGN120716 Insert size: 12 mm Thickness: 7.94 mm Corner radius: 1.6 mm Clearance angle: 0° Cutting angle: 90° Hole: without hole Special features Material: carbide Shape: square Chipbreaker: none Application: turning Typical system components: insert, holder, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The TZ120 grade insert is designed for general turning; selection of chipbreaker and grade should be matched to the specific workpiece material when using the SNGN120716 insert. How is the insert fixed in the holder? The SNGN120716 insert is secured by the holder's clamping system and, where applicable, by the recommended shim/clamp set and replacement screws for a stable assembly. Is there a chipbreaker on this insert? This insert is supplied without a chipbreaker; chip control must be achieved via appropriate holder geometry and process parameters. What does the 1.6 mm radius mean for cutting? A 1.6 mm corner radius provides enhanced edge support for heavier cuts, improving stability and reducing the risk of corner chipping during interrupted or roughing passes. Can the insert be used for internal turning? Yes, the insert is suitable for both external and internal turning when paired with the correct boring bar or internal-holder configuration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGN 120720 LX11 Wendeplatten - Tungaloy
Take advantage of the ISO-standard SNGN120720 geometry combined with the LX11 Tungaloy grade to achieve consistent edge stability and long service intervals in turning operations; order genuine inserts directly via Metav Werkzeuge or consult the technical team for holder compatibility. SNGN 120720 LX11 indexable turning insert — carbide, 2 mm corner radius, Tungaloy The SNGN 120720 LX11 is an ISO-designation square indexable insert intended for precision external and internal turning, offering a balanced combination of wear resistance and edge stability for versatile machining tasks. ISO-standard SNGN geometry for broad compatibility LX11 Tungaloy grade: wear-resistant and tough 2 mm corner radius for stable edge strength 0° rake angle for general-purpose turning Predictable fits through ISO-standard geometry The ISO designation and square format deliver a predictable seating and interchangeability with matching toolholders, reducing setup variability. Compatibility with a holder depends on form, rake angle (0°), tolerance class, fastening method, nominal size and thickness, which simplifies tool management when multiple tool types are used on a lathe. The standardised SNGN geometry supports quick replacement and repeatable clamping, helping maintain process stability across series production runs. LX11 grade: balanced wear resistance and toughness The LX11 grade by Tungaloy combines wear resistance, toughness and cutting-edge stability to address a range of turning requirements. This carbide grade is formulated to extend tool life under varied cutting conditions while preserving the integrity of the cutting edge, which translates into fewer interruptions for insert changes and more consistent surface finishes. The grade’s composition complements the insert geometry to provide dependable performance in both external and internal turning tasks. Practical design that reduces inventory complexity A square 12 mm insert with a 2 mm corner radius and a plate thickness of 7.94 mm offers a robust cutting edge and straightforward seating. The insert is supplied without a hole and carries no chipbreaker, making it suitable for applications where the holder or clamping system determines chip control. The simple system setup — an ISO insert plus the appropriate external holder or boring bar, a shim or clamp set and replacement screws — allows for efficient spare-parts stocking and predictable tool-change procedures, decreasing machine downtime. Selection advice for stable machining results Choose the chipbreaker and grade appropriate to the workpiece material, machining type and machine stability to make the most of the insert’s characteristics. The SNGN120720 geometry, combined with the LX11 grade, favours operations where edge robustness and consistent wear behaviour are priorities. When matching the insert to a holder, confirm form factor, clearance and clamping dimensions to ensure secure fixation and correct cutting angles for the intended turning strategy. Contact Metav Werkzeuge to specify the correct holder and secure genuine Tungaloy SNGN120720 LX11 inserts; technical advice and ordering are available via info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data Article number: 6806581-Tungaloy Manufacturer item number: 6806581 Manufacturer SKU: TUN6806581 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Shape: square Size: 12 mm Corner radius: 2 mm Plate thickness: 7.94 mm Rake angle: 0° Approach angle: 90° Special features ISO designation SNGN120720 Grade: LX11 Substrate: cemented carbide Intended application: turning No chipbreaker Without hole FAQ What machining tasks is this insert designed for? The SNGN120720 LX11 insert is designed for precision external and internal turning, providing a balance of wear resistance and edge stability for a variety of turning operations. How does the LX11 grade affect tool life? The LX11 Tungaloy grade combines wear resistance and toughness to extend service life and maintain cutting-edge integrity under changing cutting conditions. Which holders are compatible with this ISO geometry? Compatibility is determined by insert form, rake angle (0°), tolerance class, fastening method, size (12 mm) and thickness (7.94 mm); matching holders that accept SNGN geometry will seat the insert correctly. Is there a chipbreaker on the insert? This insert is supplied without a chipbreaker, so chip control is achieved via the chosen holder and machining parameters. What does the 2 mm corner radius mean for cutting? A 2 mm corner radius increases edge strength and reduces the risk of chipping during interrupted cuts, improving stability in general-purpose turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGU 1307AN AH120 Wendeplatten - Tungaloy
Combining high-feed capability, a PVD-coated AH120 carbide grade and a secure central hole, this indexable insert delivers productive pocket and face milling with strong process security — order directly via Metav Werkzeuge or consult our advisors for application support. SNGU 1307AN AH120 — indexable insert for milling (Tungaloy) The SNGU 1307AN AH120 is a square, PVD-coated indexable insert designed for high-feed milling, pocketing and face milling in industrial machining. DoFeed high-feed family for large chip volumes PVD-coated AH120 carbide for wear resistance Square 13 mm plate, 90° cutting geometry Cylindrical hole with double countersink 40°–60° Boosted material removal with minimal axial depth The DoFeed series focuses on productive milling where large time-chip volumes are required with small axial cuts. With its PVD-coated AH120 grade, this insert emphasises wear resistance and a sharp cutting edge to maintain cutting performance under sustained load. The square geometry and 90° cutting angle enable stable engagement during pocket and face milling, translating tool life into fewer tool changes and higher uptime. This technical setup is ideal for manufacturers seeking measurable throughput improvements without complex process changes. Reliable chip control and edge security for consistent parts A double-sided chipbreaker design combined with the central cylindrical hole and double countersink (40°–60°) supports controlled chip evacuation and secure clamping in compatible cutters. The result is reduced risk of edge chipping and improved process security, particularly in interrupted cutting typical of pocketing operations. The insert’s zero corner radius delivers a defined form for sharp features, while the carbide substrate provides the rigidity necessary for repeatable dimensional accuracy across production runs. Practical integration and application guidance Delivered as part of a system comprising the milling body, matching indexable inserts and fixing screws, this square insert integrates smoothly into standard high-feed toolholders. The SNGU 1307AN AH120 suits applications where a combination of sharp cutting action and consistent edge stability is required; typical uses include high-feed milling, slotting and general roughing before finishing. Selection should consider cutter clamp compatibility and the intended workpiece material to exploit the grade’s wear and chipping resistance. For high-feed milling tasks where throughput and process security matter, select the Tungaloy SNGU 1307AN AH120 insert and contact Metav Werkzeuge for tailored application advice or ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6999370 SKU: 6999370-Tungaloy Manufacturer item number: TUN6999370 Manufacturer: Tungaloy Model series: DoFeed Designation: SNGU1307AN AH120 Material: Hartmetall Application: Fräsen Facts Plate size: 13 mm Plate thickness: 7.94 mm Cutting angle: 90° Corner radius: 0 mm Clearance angle: 0° Special features PVD-coated carbide grade AH120 Double-sided chipbreaker Square plate form (quadratisch) Cylindrical hole with double-sided countersink (40°–60°) Designed for high-feed milling, pocketing and face/planar machining System: milling body with matching inserts and screws Wear- and chipping-resistant grade for sharp cutting edge and process security FAQ What materials is this insert suitable for? The SNGU 1307AN AH120 indexable insert (Tungaloy, SKU 6999370-Tungaloy) is designed primarily for general milling applications; its AH120 grade offers broad wear resistance suitable for a variety of steels and common workshop materials. How does the DoFeed series improve productivity? DoFeed inserts, exemplified by the SNGU 1307AN AH120, allow larger time-chip volumes at small axial depths, increasing material removal rate while maintaining process security and tool life. What clamp and hole features ensure secure mounting? This insert features a cylindrical hole with a double-sided countersink (40°–60°), allowing reliable seating and screw clamping in compatible high-feed tool systems. Is the insert reversible or single-use per edge? The SNGU 1307AN AH120 is double-sided with a chipbreaker on both faces, permitting indexation to a fresh cutting edge to extend overall insert life. Which toolholders are compatible with the SNGU 1307AN AH120? Compatibility depends on the toolholder design; the insert is intended for holders that accept square 13 mm indexable inserts with central hole mounting and a 90° cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGU 1307AN AH120 Wendeplatten - Tungaloy
Take advantage of the combination of high material‑removal performance, a PVD‑coated AH120 carbide grade and a robust square geometry for secure, repeatable milling results; order the SNGU1307AN insert directly via Metav Werkzeuge or consult our specialists for application advice. SNGU 1307AN AH120 – indexable insert for high‑feed milling by Tungaloy, PVD‑coated carbide, square 90° SNGU1307AN AH120 is an indexable square insert designed for high‑feed milling, pocketing and face milling in modern production environments. DoFeed high‑feed milling family PVD‑coated carbide AH120 Wear‑ and chip‑resistant grade Square 90° geometry with hole Maximise material removal with a high‑feed design The DoFeed family is engineered for large time‑volume removal at small axial depths, making the insert ideal for continuous high‑feed milling cycles. The combination of a high‑feed geometry and a robust carbide substrate delivers increased metal removal rates while keeping cutting forces manageable. This balance supports shorter cycle times and higher productivity on both batch and serial production runs, with benefits measurable in throughput rather than single‑cut performance. The PVD‑coated AH120 grade provides a sharp edge and consistent initial cutting performance, helping to sustain efficient machining under typical high‑feed conditions. Reliable cutting edge and improved process security A PVD coating on a wear‑resistant substrate reduces flank wear and improves resistance to chipping, which increases tool life and stabilises the process window. The insert’s geometry with a 90° profile and double‑sided chipformer ensures predictable chip control and consistent surface quality in pocketing and face milling. The presence of a cylindrical hole with a double‑sided countersink (40°–60°) adds secure clamping and straightforward indexing. Together, these design features deliver process security, minimising downtime for edge changes and helping to maintain part tolerances across production shifts. Simple integration into modular milling systems The insert is supplied as part of a system comprising a milling body, matching indexable plates and screws, enabling quick replacement and repeatable seating. The square format and a 13 mm radius across the sides allow flexible orientation for multiple cutting edges per insert, while the 7.94 mm thickness gives mechanical stability under intermittent loads. Using an indexable solution reduces inventory and handling compared with solid tools and simplifies reconditioning logistics: worn edges are indexed, not ground, for fast turnaround and lower tooling cost per component. Application guidance and operator benefits This insert is particularly suited to operations requiring sharp edges and robust performance; typical uses include pocketing, stepped face milling and high‑feed passes where low axial engagement is preferred. The AH120 grade excels where a balance of initial sharpness and anti‑chipping behaviour is required, supporting repeatable results across common materials compatible with carbide tools. For machining strategies that prioritise cycle time and consistent surface quality, the insert offers a practical route to improved efficiency while easing machine load management and tool‑change frequency. Contact Metav Werkzeuge for application support, availability and tailored recommendations on the SNGU1307AN AH120 indexable insert — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6735444 SKU: 6735444-Tungaloy Manufacturer SKU: TUN6735444 Brand: Tungaloy Model series: DoFeed Application: milling Grade: AH120 Facts Size: 13 mm Thickness: 7.94 mm Geometry angle: 90° Corner radius: 0 mm Relief angle: 0° Hole: yes Countersink: 40°–60° Special features PVD‑coated carbide AH120 Square insert, double‑sided chipbreaker Cylindrical hole with double‑sided countersink Designed for high‑feed, pocketing and face milling System: insert, matching milling body and screws FAQ What materials is this insert suited for? The SNGU1307AN AH120 indexable insert is designed for general milling tasks where a sharp edge and process security are required; the PVD‑coated carbide grade performs well across common steels and general workshop materials compatible with carbide tooling. Can the insert be used for pocketing and face milling? Yes, the square geometry and the double‑sided chipformer make the insert suitable for both pocketing and face milling, offering consistent chip control and surface finish in these operations. How does the insert attach to the milling body? The insert features a cylindrical hole and a double‑sided countersink (40°–60°) for secure clamping within the milling body; the design supports fast indexing and repeatable seating. What are the key dimensions to consider for tool selection? Important dimensions include the 13 mm size, 7.94 mm thickness and the 90° geometry; these determine compatibility with the milling body and the cutting kinematics. How does the AH120 grade affect cutting performance? The AH120 PVD‑coated carbide grade balances a sharp cutting edge with improved resistance to wear and chipping, supporting stable machining and longer edge life in many milling strategies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGU 1307AN AH3135 Wendeplatten - Tungaloy
Take advantage of the combination of high material-removal performance, a wear-resistant PVD-coated carbide grade and straightforward indexing for stable, repeatable milling results; order the insert directly via Metav Werkzeuge or consult the team for application support. SNGU1307AN AH3135 — SNGU high-feed milling insert by Tungaloy The SNGU1307AN AH3135 is a square, PVD-coated carbide insert engineered for high-feed milling, pocketing and face milling in production environments. High-feed milling for large material removal PVD-coated carbide grade AH3135 Square 13 mm insert, 90° cutting angle Double-sided chipbreaker, with central hole Engineered for efficient material removal and cycle-time reduction The DoFeed series focuses on delivering large time-chip volumes with only small axial depths, so cycle times fall without compromising stability. This insert’s geometry and cutting concept enable aggressive feed per tooth while maintaining a controlled chip load, which translates into measurable throughput gains on repetitive milling tasks. The design stabilises the cutting process and supports predictable tool life, making the solution suitable for high-volume production and demanding job-shop operations. Secure clamping and economical indexing for lower tooling costs A square insert format with a nominal size of 13 mm and a thickness of 7.94 mm provides a robust contact area in the pocket of the cutter body. The insert features a 90° cutting angle, a corner radius of 0 mm and a central cylindrical hole with a double-sided countersink (40°–60°) for reliable fastening. The double-sided chipbreaker allows indexing both sides, doubling usable cutting edges and reducing tooling consumption. Together, these features ensure repeatable seating, simple replacement and stable cutting under interrupted or continuous engagement. Durable cutting edge through modern coating and carbide grade The combination of PVD-coated carbide and the AH3135 grade yields a cutting edge engineered for wear and chipping resistance, ideal where a sharp edge and process security are required. The PVD layer increases surface hardness and reduces adhesion of workpiece material, while the substrate ensures toughness under the shock loads typical of high-feed operations. The result is a consistent surface finish and fewer unexpected tool changes, supporting higher overall equipment effectiveness. Seamless integration into milling systems and practical applications Designed as part of a complete milling system, the insert works with matching cutter bodies and clamping screws to create a compact, serviceable toolset. Typical applications include high-feed milling, pocket machining and face milling where shallow axial depths but large volumetric removal rates are desired. The system approach simplifies inventory and shortens set-up time, while the insert’s geometry and chip control support a reliable process window for production engineers and machinists. For reliable high-feed milling performance choose the Tungaloy AH3135 SNGU1307AN insert and contact Metav Werkzeuge for availability and detailed application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6999369 SKU: 6999369-Tungaloy Manufacturer SKU: TUN6999369 Manufacturer: Tungaloy Numbers / Core Technical Data Insert designation: SNGU1307AN Size: 13 mm Thickness: 7.94 mm Cutting angle: 90° Corner radius: 0 mm Free angle: 0° Countersink angle: 40°–60° Special features PVD-coated carbide AH3135 Double-sided chipbreaker Square insert form Central cylindrical hole with double-sided countersink DoFeed model series for high-feed milling System composition: milling body, matching indexable inserts and screws Suitable for high-feed milling, pocketing and face milling FAQ What applications is this insert best suited to? The SNGU1307AN AH3135 insert is tailored for high-feed milling, pocket machining and face milling where small axial depths and high volumetric removal are required. How does the AH3135 grade benefit production processes? AH3135 provides a wear- and chipping-resistant cutting edge; the PVD-coated carbide reduces adhesion and improves thermal resistance for steadier tool life with the SNGU1307AN. Can the insert be indexed to use multiple cutting edges? Yes, the insert’s double-sided chipbreaker and square form permit indexing both sides, which increases usable edges and lowers tooling cost per part. What is the purpose of the central hole and countersink? The central cylindrical hole with double-sided countersink (40°–60°) ensures secure clamping in the milling body and consistent seating to maintain process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGU 1307AN AH3135 Wendeplatten - Tungaloy
High-feed performance combined with a PVD-coated AH3135 carbide grade and a square 13 mm form with a double-sided chipbreaker delivers stable, productive milling with consistent edge life. Order the SNGU1307AN AH3135 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNGU 1307AN AH3135 — Tungaloy high-feed milling insert (DoFeed series) SNGU1307AN AH3135 is a square, PVD-coated carbide insert optimised for high-feed milling, pocket and face operations at small axial depths. DoFeed high-feed series for large material removal PVD-coated AH3135 carbide for wear resistance Square 13 mm insert with double-sided chipbreaker Cylindrical hole with double countersink 40°–60° Faster material removal with high-feed optimisation The DoFeed family is engineered for high-feed milling, allowing large time-chip volumes while maintaining very small axial cuts. This approach reduces cycle time by increasing feed per tooth rather than depth of cut, which lowers cutting forces on each pass and helps preserve tool life. The combination of the series geometry and the PVD-coated AH3135 grade supports steady metal removal rates while avoiding premature edge failure, providing a measurable productivity advantage on suitable milling bodies. Reliable edge integrity and chip control for process security The AH3135 grade is formulated to resist wear and prevent edge breakout under demanding conditions; the PVD-coated surface enhances sliding performance and retains a sharp cutting edge for longer. Complementing the material, the insert features a double-sided chipbreaker that promotes consistent chip formation and evacuation. These factors together increase process security, reduce the frequency of index changes and help achieve repeatable surface finishes in pocketing and face milling. Practical design reduces set-up variability A compact square 13 mm plate with 7.94 mm thickness provides a stable clamping footprint while allowing multiple indexing positions. The insert includes a cylindrical hole with a double countersink (40°–60°) to ensure positive seating and secure fastening in compatible milling bodies. The 90° cutting edge geometry and 0° relief angle suit standard high-feed fixtures, simplifying upgrade paths: the system consists of a milling body, matching indexable inserts and screws for straightforward assembly and repeatable alignment. Targeted uses and expected benefits in production Designed specifically for high-feed strategies, this insert is intended for pocket and face milling where throughput and edge reliability are priorities. Employing the SNGU1307AN in an optimised DoFeed set-up can reduce overall machining time and increase tool life relative to conventional insert geometries, particularly in applications demanding a sharp edge and consistent process behaviour. The plate’s reversible, indexable nature supports economical use of cutting edges and predictable tool-change intervals. For advice on integrating the AH3135 grade into existing milling systems or to confirm availability of SNGU1307AN, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss production suitability and delivery options Technical data Article number: 6735443 SKU: 6735443-Tungaloy Manufacturer SKU: TUN6735443 Manufacturer: Tungaloy Model series: DoFeed Application: Milling Material: Carbide Core specifications Plate size: 13 mm Plate thickness: 7.94 mm Geometry / ISO: 1307AN Shape: square Hole: with hole, cylindrical + double countersink 40°–60° Clearance angle: 0° Cutting edge angle: 90° Corner radius: 0 Design and special features Grade/coating: AH3135, PVD-coated carbide Chipbreaker: double-sided System composition: milling body, matching inserts, screws Typical applications: high-feed, pocket and face milling Insert form: indexable, reversible design FAQ What operations is this insert designed for? The SNGU1307AN AH3135 is designed for high-feed milling, including pocketing and face milling, where large time-chip volumes are produced at small axial depths. What benefits does the AH3135 grade provide? AH3135 is a wear- and breakage-resistant, PVD-coated carbide grade that maintains a sharp cutting edge and promotes process security during demanding milling tasks. How is the insert secured in the toolholder? The insert has a cylindrical hole with a double countersink (40°–60°) to ensure stable seating and secure clamping within the compatible milling body system. Is the plate indexable and suitable for multiple positions? Yes, the design is reversible and indexable; the square form and double-sided chipbreaker support economical indexing and consistent chip control. What are the key dimensions and identifiers for procurement? Key dimensions: 13 mm plate size, 7.94 mm thickness, 90° cutting edge angle, 0° relief, corner radius 0. Identifiers: Article number 6735443, SKU 6735443-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGU 1307AN AH3225 Wendeplatten - Tungaloy
Benefit from a targeted combination of high-feed productivity, durable PVD-coated carbide, and precise geometry for process-secure milling. The insert's sharp cutting edge and central-hole design ensure stable clamping and reliable chip control during pocketing and face milling. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. SNGU 1307AN AH3225 square insert for milling — Tungaloy A SNGU1307AN AH3225 square, double-sided PVD-coated cemented carbide insert designed for DoFeed high-feed milling, pocketing and face and planing operations. High-feed DoFeed performance PVD-coated cemented carbide AH3225 Double-sided insert with central hole Maximise material removal with minimal axial engagement The DoFeed family is engineered for high-feed milling, enabling large chip volumes with small axial depths to reduce cycle times while maintaining surface quality. This insert is tailored for operations such as pocketing and face machining where high material removal per time unit is required. The geometry delivers consistent cutting conditions, which translates into improved productivity and predictable process results in batch and serial production environments. Durable grade for process reliability and sharp edges The AH3225 grade is a PVD-coated cemented carbide developed for wear- and breakage-resistant performance. Its composition and coating support a sharp cutting edge that remains stable under intermittent or heavy engagement, reducing flank wear and the risk of edge chipping. This combination is particularly valuable when process security and repeatable surface finish are priorities; less frequent insert changes can improve overall equipment efficiency. Geometry and hole design that support secure clamping The square, double-sided format and the central hole provide straightforward clamping and indexability for multi-edge utilisation. The insert features a cylindrical hole with double-sided countersink (40°–60°) which aids secure seating and alignment on compatible cutter bodies. With a nominal plate size of 13 mm, a plate thickness of 7.94 mm, a principal cutting angle of 90° and a zero corner radius, the component supports stable cutting forces and precise positioning in modular tooling systems. The built-in double-sided chipbreaker assists controlled chip formation under the high-feed cutting regime. System compatibility and practical handling in production Designed as part of a system consisting of a cutter body, matching indexable inserts and fixing screws, the insert integrates into established toolholders for DoFeed-style milling heads. The central-hole and countersink geometry simplify mounting and torque control during tool changes, supporting repeatable setups and reduced downtime. For workshops seeking reliable, ready-to-install inserts, this format offers a balance of efficient handling and long-term cutting performance within standard milling tool systems. For application-specific recommendations or to procure the SNGU1307AN AH3225 insert, contact Metav Werkzeuge for technical advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6918333 Manufacturer SKU: TUN6918333 SKU: 6918333-Tungaloy Model series: DoFeed Facts Plate size: 13 mm Plate thickness: 7.94 mm Principal angle: 90° Corner radius: 0 Clearance angle: 0° Hole countersink angle: 40°–60° Special features Material: cemented carbide Coating: PVD Grade: AH3225 Plate shape: square Double-sided insert Central cylindrical hole with double-sided countersink Double-sided chipbreaker Application: milling, pocketing, face machining FAQ Which operations are suitable for this insert? This insert is designed for high-feed milling operations such as pocketing and face machining and is particularly effective where large time-chip volumes with small axial depths are required. What material and coating does the insert use? The insert is manufactured from cemented carbide and features a PVD-coated AH3225 grade to enhance wear resistance and edge stability. How is the insert clamped and aligned? A central cylindrical hole with a double-sided countersink (40°–60°) provides secure seating and alignment on compatible cutter bodies, supporting reliable clamping and repeatable positioning. What are the key dimensions and geometry of the insert? The insert has a nominal plate size of 13 mm, a thickness of 7.94 mm, a principal angle of 90° and a corner radius of 0, designed for high-feed applications. Is the insert suitable for systems and replacement inserts? The insert is part of the DoFeed system build and is intended to be used with matching cutter bodies, fixing screws and indexable inserts to ensure correct functionality and ease of replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGU 1307AN AH3225 Wendeplatten - Tungaloy
Combine high-feed productivity, process security and a wear-resistant PVD grade for reliable pocketing and face milling. Order the SNGU1307AN insert directly via Metav Werkzeuge or ask the consultants if needed. SNGU 1307AN AH3225 Tungaloy indexable insert – DoFeed high-feed milling, PVD-coated A SNGU 1307AN AH3225 insert engineered for high-feed milling, pocketing and face machining with small axial depths High-feed DoFeed design PVD-coated AH3225 grade Wear- and fracture-resistant cutting edge Double-sided chipbreaker with centre hole Maximise material removal with the high-feed design The DoFeed family is developed for large material removal rates while keeping axial engagement shallow; this geometry reduces cycle time without compromising rigidity. The insert’s square form and 90° included angle produce stable cutting forces that support aggressive feed per tooth, enabling efficient pocketing and face milling operations. For process planners this means fewer passes and a shorter programme time, while the engineered geometry maintains consistent chip flow during interrupted cuts. Reliable cutting performance from grade and coating The PVD-coated AH3225 carbide grade offers a combination of wear resistance and edge toughness suited to high-feed applications. The coating stabilises the cutting edge at elevated temperatures and reduces flank wear, which in turn extends tool life and maintains dimensional consistency across batches. In practice, the result is improved process security when machining a wide range of materials, ensuring repeatable surface finish and less frequent insert changes during production runs. Practical geometry and secure fixing for efficient production This insert features a double-sided chipbreaker and a central hole with a cylindrical bore plus double-sided countersink (40°–60°) for positive clamping and rapid indexability. The thickness of 7.94 mm and nominal size 13 mm provide a robust seating area that minimises vibration and supports stable cutting. Such design details simplify handling and assembly in multi-insert cutters and contribute to predictable tool-life performance, reducing unplanned downtime on the shop floor. For technical advice on Tungaloy DoFeed high-feed inserts or to request compatible cutter recommendations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the sales team will advise on application-specific choices and availability. Technical data Article number: 6918337 Manufacturer SKU: TUN6918337 SKU: 6918337-Tungaloy Model series: DoFeed ISO designation: 1307AN Data Size: 13 mm Thickness: 7.94 mm Included angle: 90° Clearance angle: 0° Corner radius: 0 mm Special features Material: carbide Coating / grade: PVD-coated AH3225 Shape: square Chipbreaker: double-sided Hole: cylindrical hole + double-sided countersink (40°–60°) Application: high-feed milling, pocketing and face milling FAQ What materials is this insert intended for? The AH3225 PVD-coated carbide insert is designed for versatile milling applications; the DoFeed geometry performs well across common steels and many alloyed materials when used with suitable cutting data. How does the DoFeed design affect cycle time? The high-feed geometry of the insert enables larger feed per tooth at small axial depths, which reduces the number of passes and shortens machining cycles for pocketing and face operations. Is the insert reversible or indexable on both sides? This is a double-sided indexable insert with a central hole and countersink for secure clamping; the chipbreaker and square form allow indexability to restore cutting edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGU 1307AN T1215 Wendeplatten - Tungaloy
Take advantage of the DoFeed series' high‑feed geometry and the T1215 carbide grade for efficient, stable milling with reduced tool changes; combine productivity with reliable edge stability and request availability or application advice via Metav Werkzeuge for a smooth production flow. SNGU 1307AN T1215 indexable insert for milling — Tungaloy SNGU 1307AN T1215 is a square indexable insert designed for high‑feed milling, pocketing and face machining with a 90° cutting angle High‑feed geometry for large time‑chip volumes Tungaloy T1215 wear‑resistant carbide grade Square 13 mm insert, 90° cutting angle Cylindrical hole with double countersink 40°–60° Maximise material removal with the DoFeed high‑feed concept The DoFeed family is engineered to deliver high‑feed performance by allowing large time‑chip volumes while keeping axial immersion shallow. This operating principle reduces the number of passes required and therefore shortens cycle times in milling operations such as pocketing and face machining. The result is a measurable improvement in throughput without compromising component quality. In practice, the geometry promotes steady chip formation and stable cutting forces, which benefits both process reliability and machine utilisation. Durable grade and edge stability for extended tool life The T1215 grade combines wear resistance with sufficient toughness to maintain a stable cutting edge under interrupted cutting and variable workloads. This balance reduces flank wear and edge chipping, translating into longer effective tool life and fewer indexings. For production environments, the consequence is improved uptime and predictable performance, which supports planning and lowers tooling overheads over sequences of similar workpieces. Secure clamping and practical insert geometry for quick indexing The square 13 mm insert form with a 7.94 mm thickness and a central cylindrical hole with a double‑sided countersink (40°–60°) provides reliable mounting and repeatable positioning. The double‑sided chipbreaker design offers two cutting edges per side, enabling multiple re‑uses of the insert and easy index changes. A 90° cutting angle ensures compatibility with common cutter bodies and supports stable radial engagement, reducing vibration and delivering consistent surface finish on milled faces. Recommended applications and process considerations Designed specifically for milling, this insert suits high‑feed strategies, pocketing and face machining where material removal rate and process stability are priorities. The insert is supplied as part of a system comprising the cutter body, matching indexable inserts and screws; choosing the correct cutter body and clamping torque is essential to exploit the DoFeed geometry fully. For best results, pair the T1215 grade with settings that favour higher feed per tooth and shallow axial depth, and monitor chip formation to confirm ideal cutting conditions. Contact Metav Werkzeuge for tailored milling recommendations and to confirm current stock of Tungaloy DoFeed inserts; consultants are available for application guidance and technical specifications Technical data Article number: 6747242 Manufacturer SKU: TUN6747242 Label: SNGU1307AN T1215 Tungaloy‑insert Series: DoFeed Application: Milling Material: Carbide Core data Insert size: 13 mm Thickness: 7.94 mm Cutting angle: 90° Corner radius: 0 mm Relief angle: 0° Special features Grade: T1215 (Tungaloy carbide) Plate form: square Hole: with cylindrical hole Hole style: cylindrical hole + double countersink (40°–60°) Chipbreaker: double‑sided Insert type: indexable insert for high‑feed milling FAQ What milling operations suit this insert best? The SNGU1307AN T1215 indexable insert from Tungaloy is intended for high‑feed milling, pocketing and face machining where large time‑chip volumes are required with shallow axial depths. How does the T1215 grade affect tool life? Tungaloy's T1215 grade provides a balance of wear resistance and toughness that preserves edge stability, thereby extending service intervals and reducing the frequency of insert changes. Can the insert be used on standard cutter bodies? Yes, the square 13 mm form and 90° cutting angle are compatible with standard milling cutter bodies designed for SNGU‑style inserts; correct clamping and torque ensure repeatable performance. How many cutting edges are available per insert? The double‑sided chipbreaker offers multiple usable edges; the insert can be indexed to expose fresh cutting edges, improving overall economy. Is the insert supplied individually or as a system component? The item is part of a system that includes the milling body, matching indexable inserts and fastening screws; consult Metav Werkzeuge for recommended combinations and availability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGU 1307AN T3225 Wendeplatten - Tungaloy
Combining the high‑feed milling capability of the DoFeed series with the wear‑resistant T3225 carbide grade and a secure clamping hole design, this insert delivers productive pocketing and face milling with reduced cycle times. Order the SNGU1307AN T3225 directly via Metav Werkzeuge or request application advice from our consultants. SNGU 1307AN T3225 indexable insert for milling — Tungaloy (DoFeed) The SNGU1307AN T3225 is an indexable insert developed for high‑feed milling, designed for pocketing and face machining within the DoFeed family High‑feed design for large material removal Tungaloy T3225 grade for wear resistance Double‑sided chipbreaker, quadrilateral form Cylindrical hole with countersink for secure clamping Boost throughput with high‑feed capability The DoFeed model series is engineered for high‑feed milling, enabling large time‑span volumes at small axial depths of cut; this results in significantly higher material removal per tool engagement and shorter cycle times. The SNGU1307AN insert leverages this principle: its geometry prioritises shear stability and continuous chip evacuation, translating the insert’s form into tangible production gains. For operations where pocket machining and planar surfacing must be both fast and repeatable, the combination of the DoFeed concept and a dedicated insert grade yields measurable efficiency improvements and predictable process behaviour. Secure clamping and consistent chip control for steady results A stable mechanical interface is essential for repeatable machining. The insert’s cylindrical hole with double‑sided countersink (40°–60°) provides secure seating in compatible milling bodies, while the square (13 mm) form and 90° orientation ensure robust support under heavy radial loads. The double‑sided chipbreaker reduces the tendency to form long, uncontrolled chips and supports consistent surface finishes during pocketing and face milling. With a plate thickness of 7.94 mm, the geometry contributes to vibration resistance and edge stability, which helps maintain tool life and process reliability across batches. T3225 carbide grade: balanced wear resistance and toughness The T3225 grade from Tungaloy has been specified for this insert to provide a balanced combination of wear resistance, toughness and edge stability. That mix is especially valuable in high‑feed applications where sustained, repetitive engagements demand a cutting edge that resists chipping yet remains resistant to abrasive wear. For users seeking consistent results across mixed steel components, this carbide grade reduces the frequency of index changes and supports longer, more productive tool cycles. The material choice and insert geometry work together to maintain surface quality and lower overall machining costs through extended run times. Contact Metav Werkzeuge for tailored cutting data, availability and to request the Tungaloy SNGU1307AN T3225 insert for DoFeed high‑feed milling at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6747499 Manufacturer SKU: TUN6747499 SKU: 6747499-Tungaloy Core specifications Size: 13 mm Thickness: 7.94 mm Insert angle: 90° Corner radius: 0 mm Relief angle: 0° Design & features Material: carbide Grade/coating: T3225 Series: DoFeed Form: square (quadrilateral) Hole style: cylindrical hole + double‑sided countersink (40°–60°) Chipbreaker: double‑sided Application: milling Model designation: SNGU1307AN FAQ What machining tasks is this insert intended for? The SNGU1307AN T3225 indexable insert from Tungaloy is designed primarily for high‑feed milling, including pocketing and face milling within the DoFeed system. Which material and grade does the insert use? This insert is made from carbide and specified in the T3225 grade, offering a balance of wear resistance and toughness suitable for high‑feed operations. Is the insert reversible or single‑sided? The insert is double‑sided with a quadrilateral form, enabling the use of multiple cutting edges before replacement. What clamping interface is required for this insert? The insert features a cylindrical hole with a double‑sided countersink (40°–60°) and is intended for secure seating in compatible DoFeed milling bodies. Which dimensions should be checked before ordering? Key dimensions to verify are the 13 mm plate size, 7.94 mm thickness and 90° insert angle; the product is listed under SKU 6747499-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNGU 1307AN T3225 Wendeplatten - Tungaloy
Efficient high‑feed pocketing and face milling is achieved by combining the Tungaloy T3225 grade with the compact square 13 mm size and the proven double‑sided geometry; benefit from superior chip control, consistent edge stability and reduced tool changes — order directly via Metav Werkzeuge or consult our specialists for application support. SNGU 1307AN T3225 – Indexable Insert for Milling by Tungaloy The SNGU1307AN T3225 is a square, double‑sided indexable insert designed for high‑feed milling, optimised for pocket and face machining where large time‑material volumes are required at small axial depths High‑feed family for large chip volume Tungaloy T3225 grade for wear resistance Square 13 mm insert, 90° for stable cuts Double‑sided chipbreaker for controlled chips Cylindrical hole with countersink 40°–60° Maximise throughput with high‑feed geometry The DoFeed series was conceived to raise productivity in roughing and pocketing operations by enabling greater feed per tooth while keeping small axial depths. The geometry delivers a consistent cutting engagement that reduces cycle times and spreads heat generation, which results in measurable gains in productivity and process stability. As an indexable solution, this insert supports the transition from solid tools to a modular system that separates cutting edges from bodies, enabling rapid replacement and a predictable cost‑per‑edge. The combination of high‑feed design and the DoFeed family attributes makes this insert particularly suitable for operations demanding efficient material removal without sacrificing component integrity. Longer runtimes through balanced grade and edge design Tungaloy’s T3225 grade blends wear resistance, toughness and edge stability to meet the demands of interrupted cuts and high material removal rates. Manufactured in cemented carbide, the plate geometry with a double‑sided chipbreaker ensures reliable chip formation and evacuation, which reduces flank wear and thermal loading on the cutting edge. The square shape with a 13 mm inscribed size and a thickness of 7.94 mm provides a stable contact surface in the pocket of the milling body, while the 90° seating angle contributes to predictable tool deflection characteristics. These attributes translate into extended index intervals and fewer tool changes during long production runs. Practical system integration and secure clamping The insert is supplied for use within a modular system comprising the milling body, matching inserts and fastening screws, which simplifies tool management and inventory. The design includes a hole with a cylindrical bore and a double‑sided countersink (40°–60°), enabling positive seating and reliable torque transmission in many common high‑feed toolholders. Double‑sided usage effectively doubles the number of available cutting edges per plate, lowering cost per edge and reducing downtime for index changes. Clear labelling of grade and geometry supports traceability and repeatable tool setups, making the insert a practical choice for shops seeking both throughput and consistent surface results. Consult Metav Werkzeuge for tailored advice on integrating the Tungaloy SNGU1307AN T3225 into existing machining cells — Metav Werkzeuge can provide application guidance, compatibility checks and availability information via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6749573 Manufacturer SKU: TUN6749573 SKU: 6749573-Tungaloy Manufacturer article number: 6749573 Material: cemented carbide Grade: T3225 Model series: DoFeed Facts Size: 13 mm Thickness: 7.94 mm Shape: square Angle: 90° Corner radius: 0 Free angle: 0° Special features Double‑sided chipbreaker With hole: cylindrical hole + double‑sided countersink (40°–60°) For milling: high‑feed applications, pocketing, face milling System composition: milling body, matching inserts and screws Suitable for large time‑material volumes with small axial depths FAQ What machining tasks is this insert best suited to? The SNGU1307AN T3225 insert is intended for high‑feed milling tasks such as pocketing and face machining, where large time‑material volumes are required with low axial engagement. How does the T3225 grade affect tool life? Tungaloy’s T3225 grade provides a balance of wear resistance and toughness that improves edge stability and extends usable life under high‑feed conditions, which helps to reduce index frequency for the insert. Can the insert be used on both sides and how does that help? Yes, the plate is double‑sided; using both sides effectively doubles the number of cutting edges per insert, lowering cost per edge and minimising downtime for replacements. What clamping features ensure secure mounting in the toolholder? The insert includes a cylindrical hole with a double‑sided countersink (40°–60°) that supports positive seating and reliable torque transmission when mounted in compatible DoFeed tool bodies. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNGX 120712 FX105 Wendeplatten - Tungaloy
The combination of a robust FX105 grade and a carbide construction delivers stable cutting edges and long tool life for demanding turning operations, while the square ISO form with a 1.2 mm corner radius ensures versatile use on both external and internal features; order the insert directly via Metav Werkzeuge or consult our technical team for compatibility advice. SNGX 120712 FX105 square ISO turning insert, Tungaloy – carbide, 1.2 mm radius, 0° relief SNGX120712 FX105 is an ISO-indexable turning insert designed for general external and internal turning applications where a balance of wear resistance and edge stability is required ISO indexable turning insert SNGX 120712 FX105 Tungaloy carbide grade for balanced wear Square form with 1.2 mm corner radius 0° relief angle and 90° cutting edge orientation Consistent cutting performance for productive turning The FX105 grade is formulated to provide a reliable balance between wear resistance and edge toughness, reducing unplanned tool changes and improving process stability. As an ISO-standard insert in a square form, it offers four usable cutting edges and straightforward indexation, which lowers tooling costs per edge. The carbide substrate supports sustained cutting at typical turning speeds, and the combination of a 1.2 mm corner radius with a 0° relief angle promotes controlled chip formation and predictable workpiece geometry, particularly on interrupted cuts and finishing passes. Compatibility and system advantages for quick integration Designed to match standard holder geometries, the insert works with appropriate external holders or boring bars when the holder’s form, clearance angle, tolerance class, clamping method, size and thickness correspond. The square form and the 90° cutting-edge orientation simplify setup for shoulders and facing operations, while the insert’s dimensions—notably its 7.94 mm thickness and 12 mm nominal size—ensure secure clamping and repeatable positioning. When selecting a holder, choose one with matching seat geometry and clamping screws to preserve the insert’s cutting performance and safety. Materials, applications and practical benefits explained This carbide insert is intended for general turning tasks and is suited to a range of workpiece materials when the correct chipbreaker and grade are chosen. The designation indicates a factory-specified chip control geometry (noted as special), which must be matched to the work material and machining stability for optimal results. For users less familiar with tooling grades: the FX105 grade is optimised to extend edge life on mixed operations, meaning fewer indexings and a steadier surface finish, translating into improved productivity and consistent part quality. For reliable machining results with genuine Tungaloy quality, contact Metav Werkzeuge for order placement or to discuss the best holder and chipbreaker combination for specific turning applications — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6815368 Manufacturer SKU: TUN6815368 SKU: 6815368-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.2 mm Plate thickness: 7.94 mm Plate size: 12 mm Relief angle: 0° Cutting edge orientation: 90° Special features Material: carbide Grade: FX105 Plate form: square Hole style: special Chipbreaker: special Application: turning (external and internal) ISO indexable insert FAQ What holder types are compatible with this insert? Compatibility depends on holder geometry; the SNGX120712 FX105 turning insert requires a holder with matching seat form, clearance angle and clamping suitable for ISO square inserts Which materials can be machined with this grade? The FX105 grade on this carbide insert is designed for a broad material range when paired with the appropriate chipbreaker; it performs well in mixed machining tasks that demand both wear resistance and edge strength What does the 1.2 mm corner radius mean for the finished part? A 1.2 mm corner radius provides a robust edge that improves surface finish on radiused features and increases edge stability during intermittent cuts compared with smaller radii How many cutting edges are available per insert? Due to its square form, the insert offers up to four indexable cutting edges, reducing tooling costs per edge by enabling multiple re-positions before disposal Is this an original Tungaloy product and how is it identified? Yes, the item is an original Tungaloy turning insert and can be referenced by the SKU 6815368-Tungaloy or the manufacturer article number 6815368 in procurement and tool management Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNHU 1706AN AH120 Wendeplatten - Tungaloy
Benefit from the combination of a DoFeed high-feed geometry, a PVD-coated AH120 carbide grade for improved wear resistance, and a secure, double-sided design that keeps indexing and changeover simple; order via Metav Werkzeuge or consult the technical team for application advice. SNHU 1706AN AH120 high-feed milling insert — Tungaloy A SNHU1706AN AH120 indexable insert for high-feed milling, optimised for pocketing and face milling where large chip volumes must be removed with small axial depths. DoFeed high-feed geometry for large chip loads PVD-coated AH120 carbide for wear resistance Square, 17 mm insert with 6.35 mm thickness Double-sided chipbreaker and centred hole design Faster metal removal with predictable cutting forces The DoFeed high-feed geometry delivers large time-chip volumes at low axial engagement, a combination that increases the effective metal removal rate without provoking excessive cutting forces. The insert geometry spreads the load across the cutting edge so that material is removed efficiently during pocketing and planing tasks, shortening cycle times and improving throughput. This design is particularly suited to operations that demand stable feed rates and repeatable results in series production. Durable edge life thanks to PVD AH120 carbide The PVD-coated AH120 substrate is a wear- and chipping-resistant carbide grade developed for milling applications that require a sharp cutting edge and process security. The coating increases surface hardness and reduces adhesion of built-up edge, which helps to maintain surface finish consistency and extend index intervals. In practice, this means fewer interruptions for tool changes and a more predictable tool-life profile when machining challenging batches. Robust geometry and secure clamping for reliable indexing The insert is square with a nominal size of 17 mm and a plate thickness of 6.35 mm, providing a stable seating and robust cutting edges. A central cylindrical hole with double countersink (40°–60°) facilitates reliable clamping in compatible milling bodies, while the double-sided chipbreaker enables economical indexing and reuse of both faces. The 90° orientation supports conventional milling set-ups and simplifies toolpath planning in CAM systems. System compatibility and application focus for process stability Delivered as part of a system comprising milling body, matching indexable plates and fixing screws, this insert supports a productive high-feed milling strategy for pocketing and face operations. The combination of proven edge technology and a standardised clamping hole reduces set-up variation and supports reproducible quality in serial machining. As an original Tungaloy component, the insert contributes to a process-oriented tool solution for manufacturers aiming to balance productivity and surface integrity. For procurement guidance or application-specific recommendations for the SNHU1706AN AH120 insert, contact Metav Werkzeuge for technical consultation and local availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6861808 SKU: 6861808-Tungaloy Manufacturer SKU: TUN6861808 Model series: DoFeed Application: Milling Facts Size: 17 mm Thickness: 6.35 mm Corner radius: 0 mm Relief angle: 0° Cutting angle: 90° Hole: cylindrical hole + double countersink (40°–60°) Special features Material: carbide Coating/grade: PVD AH120 Double-sided chipbreaker Square plate form System build: milling body, matching indexable inserts and screws Typical use: high-feed milling, pocketing and face milling FAQ What operations is this insert best suited to? The SNHU1706AN AH120 insert is optimised for high-feed milling operations such as pocketing and face milling, where large chip volumes are required at small axial depths. Which material and coating does the insert use? The insert is made of carbide with a PVD AH120 coating, selected for wear resistance and process security in milling applications. How does the insert ensure secure clamping? A central cylindrical hole with double countersink (40°–60°) provides stable seating in compatible milling bodies, while the square form and 6.35 mm thickness support reliable indexing. Is the insert economical to use? The double-sided chipbreaker and re-indexable design reduce tooling costs per edge and allow for multiple edge usages before replacement, improving overall process economy with the SNHU1706AN AH120. What system components are required for use? Use in a DoFeed system requires a compatible milling body plus the matching indexable plates and fixing screws; the SNHU1706AN is supplied as the indexable plate component. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com