SNHU 1706AN AH120 Wendeplatten - Tungaloy
Take advantage of the AH120 PVD-coated carbide and the DoFeed high-feed geometry for faster cycle times and reliable edge life; the double-sided chipbreaker and secure hole mounting ensure repeatable seating and reduced downtime. Order the SNHU1706AN AH120 indexable insert directly via Metav Werkzeuge or consult the technical team for application support. SNHU 1706AN AH120 indexable insert for milling by Tungaloy — high-feed geometry, PVD-coated carbide The SNHU1706AN AH120 Tungaloy indexable insert is a square, PVD-coated carbide insert designed for high-feed milling applications, combining a sharp cutting edge with process-stable performance for pocketing and face milling. High-feed geometry for increased material removal PVD-coated AH120 for wear and chipping resistance Square 17 mm format with secure hole mounting Double-sided chipbreaker for stable cutting Faster material removal with the DoFeed concept The DoFeed family is engineered for large material removal volumes at small axial depths, translating into shorter cycle times and higher throughput on modern milling centres. The high-feed design allows lateral engagement with reduced axial immersion, so more metal is removed per pass while maintaining surface quality. For production environments seeking consistent machining rates, this geometry offers a direct efficiency gain and supports predictable tool life through controlled load distribution. Durable cutting edge and consistent process security The AH120 grade is a PVD-coated carbide formulation developed to resist wear and minimise edge chipping under interrupted cuts and elevated temperatures. This results in fewer unplanned tool changes and steadier component tolerances during prolonged runs. The coating and substrate combination supports a sharp cutting edge that preserves finish quality even when machining demanding pocketing or face-milling operations, providing a measurable reduction in scrap and rework. Secure seating and reliable clamping for repeatable results The square insert design with a cylindrical hole and a double-sided countersink (40°–60°) provides stable positioning in the cutter body and straightforward indexability. With a 6.35 mm thickness and 17 mm size, the insert seats firmly and resists tilting under machining forces, while the double-sided chipbreaker helps control swarf formation and evacuation. These mechanical details reduce the risk of misalignment, so process repeatability and workpiece accuracy are improved across batch production. Easy system integration and application versatility The insert is supplied as part of a system comprising the milling body, matching indexable inserts and clamping screws, enabling quick retrofits and minimal setup time. Typical uses include high-feed milling, pocket machining and face milling where high metal removal rates and surface quality are both required. For questions about fitment in a specific cutter or recommended cutting data, Metav Werkzeuge’s application specialists can provide tailored guidance to match the insert to the machine, material and cycle requirements. Contact Metav Werkzeuge for advice on integrating the Tungaloy DoFeed SNHU1706AN AH120 insert into production — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and order placement Technical data Article number: 6861813 SKU: 6861813-Tungaloy Manufacturer SKU: TUN6861813 Manufacturer: Tungaloy Model series: DoFeed Facts Insert size: 17 mm Thickness: 6.35 mm Included angle: 90° Corner radius: 0 Relief angle: 0° Countersink angle: 40°–60° Hole: with hole Special features Material: carbide (hardmetal) Coating / grade: AH120 (PVD-coated) Double-sided chipbreaker Square insert form Cylindrical hole with double-sided countersink System build: milling body with matching inserts and screws Typical applications: high-feed milling, pocketing, face milling FAQ What is the primary application for this insert? The SNHU1706AN AH120 Tungaloy indexable insert is optimised for high-feed milling and is suitable for pocketing and face milling where large time-material removal is required at small axial depths. What material and coating are used on the insert? This insert is made from carbide and features the AH120 PVD coating, chosen for wear resistance and reduced tendency to chip during interrupted cuts. Which dimensions and mounting features are important for integration? Key dimensions are 17 mm size and 6.35 mm thickness, with a 90° included angle and a cylindrical hole plus double-sided countersink (40°–60°) for secure seating in the milling cutter. Does the insert provide reliable chip control? Yes, the double-sided chipbreaker is designed to control swarf and promote stable cutting, which helps maintain surface quality and repeatable performance. Is the insert compatible with standard DoFeed milling bodies? The SNHU1706AN is part of the DoFeed system; it integrates with the corresponding milling body and clamping hardware to ensure correct positioning and indexability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNHU 1706AN AH140 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH140 carbide, robust double‑sided chip control and the DoFeed high‑feed design to maximise material removal with minimal axial engagement; order directly via Metav Werkzeuge or request advice from the consultants. SNHU 1706AN AH140 Tungaloy indexable insert for milling SNHU1706AN AH140 Tungaloy indexable insert engineered for high‑feed milling, pocketing and face milling with small axial depths DoFeed high‑feed family PVD‑coated carbide AH140 Square insert, 17 mm edge Double‑sided chipbreaker, with hole Exceptional productivity for shallow‑axial milling The DoFeed design delivers efficient chip volume removal while limiting axial engagement, making the insert ideal for high‑feed operations and pocket machining. The combination of a PVD‑coated AH140 carbide grade and a sharp cutting edge enables stable cutting performance and a predictable tool life, which reduces tool change frequency and supports continuous production. This approach focuses on maximising volume removal per unit time without increasing axial depth, improving throughput in component machining. Reliable edge life and process stability The insert’s AH140 grade is formulated for resistance to wear and chipping under interrupted and continuous cuts. The PVD coating enhances flank and crater resistance, so the insert sustains its geometry longer under typical milling stresses. For operations where process reliability is critical, this geometry and coating combination helps maintain dimensional consistency and surface finish over extended runs, lowering rework rates and supporting stable cycle times. Design details that aid clamping and chip control The square form and the cylindrical hole with double‑sided countersink (40°–60°) support secure seating and repeatable indexing. The double‑sided chipbreaker promotes controlled chip formation across a range of feeds, reducing the risk of jammed chips in pocketing or face milling. A 6.35 mm plate thickness and the 17 mm edge length provide robust support for cutting forces, while the 90° insert angle suits a wide variety of face and pocketing operations on modern milling bodies. Application guidance and system compatibility This insert is part of a system comprising the milling body, matching indexable inserts and fastening screws; the set‑up supports fast insert changes and straightforward inventory management. Typical uses include high‑feed milling, pocket machining and planing operations where small axial depths are required but high time‑material volumes are sought. For materials that demand a sharp edge and consistent chip control, the combination of grade and geometry gives a balanced solution between performance and tool life. Contact Metav Werkzeuge to request application advice or to order the Tungaloy SNHU1706AN AH140 indexable insert for optimised high‑feed milling operations Technical data Article number: 6861807 Manufacturer SKU: TUN6861807 SKU: 6861807-Tungaloy Model series: DoFeed Designation: SNHU1706AN AH140 Tungaloy indexable insert Facts Angle: 90° Insert size: 17 mm Thickness: 6.35 mm Corner radius: 0 mm Clearance angle: 0° Special features Material: carbide Coating / grade: PVD‑coated AH140 Plate form: square Hole: with cylindrical hole + double‑sided countersink (40°–60°) Chipbreaker: double‑sided System composition: milling body, matching indexable inserts and screws Typical application: high‑feed milling, pocketing and face milling Benefit focus: sharp cutting edge and process reliability FAQ What materials is this insert suitable for? The SNHU1706AN AH140 insert from Tungaloy is designed primarily for general milling tasks where a sharp edge and wear resistance are required; the AH140 grade provides broad material capability for typical machining jobs. Is the insert reversible or indexable on both sides? Yes, the square geometry with a double‑sided chipbreaker allows indexing to a fresh cutting edge; the SNHU1706AN AH140 indexable insert can be rotated as designed to use multiple cutting edges. What are the key design advantages of the DoFeed series? DoFeed inserts focus on high‑feed performance with small axial engagement, enabling larger time‑material removal while keeping cutting depth low, which the SNHU1706AN AH140 supports through its geometry and coating. Which mounting features assist clamping repeatability? The cylindrical hole with a double‑sided countersink (40°–60°) and standardised dimensions ensure secure seating and repeatable positioning in the corresponding milling body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNHU 1706AN AH725 Wendeplatten - Tungaloy
Take advantage of the DoFeed high‑feed concept combined with the AH725 PVD‑coated carbide grade for stable chip formation and reliable performance when milling Stahl and rostfreier Stahl; order the SNHU 1706AN AH725 insert via Metav Werkzeuge or consult the advisors for application support. SNHU 1706AN AH725 Tungaloy milling insert — high‑feed DoFeed family The SNHU 1706AN AH725 is a square, indexable milling insert designed for high‑feed milling, pocketing and face machining with small axial depths and high time‑chip volumes. High‑feed design for large time‑chip volumes PVD‑coated AH725 grade for Stahl and rostfreier Stahl Double‑sided chipbreaker and cylindrical hole Compatible with DoFeed high‑feed milling system Increased material removal with controlled axial cut for faster cycle times The DoFeed series is engineered for high‑feed milling, where productivity depends on high feed per tooth at low axial depths. The SNHU insert’s geometry gives a large effective cutting width while keeping axial engagement shallow, which reduces cutting forces and enables higher table feed rates. The result is a measurable increase in throughput when machining pockets or wide face passes. The combination of the high‑feed geometry and an appropriate milling body ensures consistent chip load and shorter cycle times for production batches. Universal, break‑resistant grade for mixed material workflows The AH725 is a PVD‑coated carbide grade developed for broad applicability across Stahl and rostfreier Stahl. Its fracture‑resistant matrix maintains edge integrity under interrupted cuts and variable workpiece materials, which makes tool management simpler in mixed‑material shops. The PVD coating improves wear resistance and reduces built‑up edge, helping to sustain dimensional accuracy and surface finish over longer tool life—valuable where process security is a priority. Practical geometry and secure clamping for reliable machining Designed as a square insert with a 0.00 mm corner radius, the SNHU offers sharp profile control for precise pocket and face features. The plate measures 17 mm with a thickness of 6.35 mm and features a cylindrical hole with double‑sided countersink (40°–60°) to fit standard DoFeed clamping systems; the tool angle is 90°. The double‑sided chipbreaker provides two usable cutting edges per side, improving economy and reducing index time. Such technical details translate into predictable tool change intervals and straightforward inventory handling. System compatibility and application support for process reliability The SNHU insert is supplied as part of the DoFeed system build: milling body, matching indexable inserts and fastening screws. This system approach simplifies selection and guarantees mechanical fit and performance consistency across toolholders. For shops aiming to raise productivity without increasing process variability, the solution offers a clear balance of robustness, surface quality, and ease of integration into existing milling operations. If uncertain about selection for a specific workpiece or cycle, application guidance is readily available. Contact Metav Werkzeuge for tailored application advice and to source Tungaloy SNHU 1706AN AH725 inserts for high‑feed milling projects Technical data Article number: 6861814 Manufacturer SKU: TUN6861814 SKU: 6861814-Tungaloy Model series: DoFeed Brand: Tungaloy Designation: SNHU1706AN AH725 Tungaloy indexable insert Facts Plate size: 17 mm Plate thickness: 6.35 mm Cutting angle: 90° Corner radius: 0 Clearance angle: 0° Countersink angle: 40°–60° Special features Material: carbide Coating: PVD (AH725) Shape: square Hole: with cylindrical hole + double‑sided countersink Chipbreaker: double‑sided Typical application: high‑feed milling, pocketing, face milling System compatibility: DoFeed milling system FAQ What machining tasks suit this insert best? The SNHU 1706AN AH725 is intended for high‑feed milling, pocketing and face machining where large time‑chip volumes are required at small axial depths; it performs well on Stahl and rostfreier Stahl. Is the AH725 grade suitable for stainless steels? Yes, the AH725 PVD‑coated carbide grade is formulated for universal use and fracture resistance, making it appropriate for rust‑resistant alloys such as rostfreier Stahl as well as general Stahl. How many cutting edges are available per insert? The square SNHU insert is double‑sided with a chipbreaker on each side, providing multiple indexable cutting edges to extend in‑service life and economy. Which system elements are needed to mount this insert? The SNHU insert is part of the DoFeed system and requires a compatible DoFeed milling body plus the matching screws for secure clamping and optimal performance. What does a corner radius of 0 mean for finish and strength? A corner radius of 0 gives a sharp cutting corner for accurate profile reproduction; while it helps with detail, tool life and strength depend on feed and depth settings as well as material properties. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMA 090308 T5105 Wendeplatten - Tungaloy
Reliable performance and consistent tool life result from the combination of a wear-resistant T5105 coating and an ISO-standard geometry that fits common turning holders; these qualities support smooth high-speed machining of cast iron. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. SNMA090308 T5105 — ISO turning insert for Turning, CVD-coated carbide, 0.8 mm radius — Tungaloy The SNMA090308 T5105 is a square ISO-format indexable insert designed for stable, high-speed external and internal turning of cast iron under steady machining conditions. ISO-format square insert 09 size CVD-coated carbide grade T5105 0.8 mm nose radius for stable cuts Cylindrical-hole design, 3.18 mm thick Consistent high-speed cutting for cast iron The insert offers a CVD-coated carbide grade T5105 formulated for wear resistance during high-speed machining of cast iron. This combination reduces flank wear and extends usable life when operating under stable cutting conditions, which in turn reduces tool-change frequency and supports throughput. The square form and the specified 0.8 mm nose radius deliver a predictable cutting edge for both roughing and light finishing passes, while the 3.18 mm thickness contributes to the insert’s rigidity and edge stability. Compatibility, fitment and what it means for set-up Compatibility with a toolholder is determined by insert form, clearance angle, tolerance class, fixing method, size and thickness. The neutral 0° clearance angle and the cylindrical hole require matching holders that accept ISO square inserts with a central clamping screw or suitable clamp set. Specifying ISO geometry ensures interchangeability across standard external holders and boring bars, simplifying inventory and speeding changeovers on the shop floor. Practical advantages in process security and surface results A CVD-coated grade provides controlled wear behaviour that supports repeatable results and consistent surface finish on cast-iron components. Selecting the correct grade and, if required, a complementary chipbreaker or edge prep for the machining task, reduces the risk of built-up edge and workpiece damage. The neutral clearance geometry can aid in maintaining edge form during interrupted cuts typical for certain turning operations. System composition and handling tips A complete cutting system comprises the ISO turning insert, an appropriate external holder or boring bar, a matching shim or clamp set, and securing screws. Inserts from this family are compatible with standard ISO tooling systems; when replacing inserts, ensure the pocket is clean and the clamping elements are correctly torqued to maintain positional accuracy. For applications requiring different cutting modes, consider alternative grades or edge preparations tailored to the workpiece and stability at the machine. Discuss application suitability with Metav Werkzeuge or request tailored recommendations for Tungaloy turning inserts — contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical consultation or to place an order. Technical data Article number: 6854105 SKU: 6854105-Tungaloy Manufacturer SKU: TUN6854105 Model series: ISO turning indexable inserts Facts Size designation: 09 Thickness: 3.18 mm Nose radius: 0.8 mm Clearance angle: 0° Insert angle: 90° Design & materials Material: carbide Coating / grade: T5105 (CVD-coated) Insert shape: square Hole: cylindrical hole Application: turning; compatible with external holders and boring bars FAQ What materials is this insert best suited for? The SNMA090308 T5105 insert is optimised for machining cast iron; the T5105 grade and CVD coating provide wear resistance suited to high-speed turning of that material. How is compatibility with toolholders ensured? Compatibility is defined by ISO geometry: form, clearance angle, tolerance, fixing method, size and thickness must match the holder; the SNMA090308 follows ISO standards for straightforward interchange. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning when paired with the appropriate boring bar or internal holder designed for ISO square inserts. What is the recommended system setup when fitting the insert? Use a matching external holder or boring bar, a correct shim or clamp set and the specified securing screws; ensure pockets are clean and clamping torque is applied to maintain positional accuracy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 090308 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated carbide grade for low cutting forces, a robust 90° square geometry and ISO compliance to maintain steady production and superior surface quality; order the insert directly via Metav Werkzeuge or consult our specialists for compatibility checks. SNMA 090308 TH10 turning insert by Tungaloy — ISO square insert for external and internal turning The SNMA090308 TH10 is an ISO-standard turning insert designed for external and internal turning applications where a sharp, uncoated cutting edge supports low cutting forces and clean finishes ISO-standard SNMA insert for turning Uncoated carbide grade TH10 for low cutting forces 90° square insert with cylindrical hole Compatible with standard external/internal holders Consistent finishes with lower cutting forces The uncoated TH10 grade is a sharp, universal carbide formulation developed for applications on non-ferrous materials and parts that require a clean finish. An uncoated cutting edge reduces friction and helps to achieve a clean surface without excessive burr formation, while the inherently sharp edge lowers the energy required for chip formation. This results in more efficient cutting, reduced tool pull and fewer secondary operations for finishing. ISO-compliant geometry for predictable performance An ISO-standard geometry ensures straightforward interchangeability and predictable cutting behaviour. The square 90° design provides rigidity for shoulder cuts and stable engagement, while the specified clearance angle (0°) and dimensional tolerances govern compatibility with ISO holders. Because compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness, the insert performs reliably when matched to appropriate external holders or boring bars. Easy integration with common clamping systems The insert is supplied in a system context: ISO insert, compatible external holder or boring bar, plus the required shim/clamping set and replacement screws for secure assembly. The cylindrical hole facilitates accurate seating and positive clamping, and the 0.8 mm corner radius balances edge strength with the ability to generate the desired profile. These mechanical aspects simplify tool changes and maintain repeatable clamping accuracy across tool stations. Productivity gains and dependable surface quality in turning Choosing an ISO square insert with an uncoated carbide cutting edge supports higher productivity through efficient chip formation and fewer interruptions for tool changes. The combination of TH10 grade and the insert’s geometrical stability reduces rework and contributes to consistent component quality in series production. For operations focusing on non-ferrous components or delicate surface requirements, this solution offers a pragmatic balance of performance and economy. Contact Metav Werkzeuge for tailored application advice and availability of the Tungaloy SNMA090308 TH10 turning insert (SKU 6806615-Tungaloy), including compatibility checks and delivery options Technical data Article number: 6806615 Manufacturer SKU: TUN6806615 SKU: 6806615-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMA090308 Facts Insert size: 09 Corner radius: 0.8 mm Thickness: 3.18 mm Clearance angle: 0° Insert geometry: 90° Special features Material: carbide (cemented carbide) Coating / grade: TH10 (uncoated) Hole style: cylindrical hole Plate shape: square Chipbreaker: without Application: turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The SNMA090308 TH10 insert is formulated for non-ferrous materials and applications where an uncoated, sharp cutting edge supports low cutting forces and a clean surface finish. How does the 90° geometry affect performance? A 90° square geometry provides rigidity for shoulder turning and enables predictable cutting behaviour when the insert is used in holders compatible with the SNMA090308 dimensions. Is the insert compatible with standard ISO holders? Compatibility depends on matching the holder by form, clearance angle, tolerance class, fastening, size and thickness; when those parameters align, the SNMA090308 TH10 inserts fit standard external and internal turning holders. What are the key identifiers for ordering and inventory? Order and inventory can reference the article number 6806615, Manufacturer SKU TUN6806615 or SKU 6806615-Tungaloy for the SNMA090308 TH10 turning insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120404 GT720 Wendeplatten - Tungaloy
Benefit from precise finishing, consistent wear behaviour and the compact 0.4 mm nose radius that helps maintain tolerances during fine turning. Order the SNMA120404 GT720 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMA120404 GT720 ISO turning insert for precision finishing, Tungaloy The SNMA120404 GT720 is an ISO-pattern, square turning insert designed for finishing and light turning of steel, optimised for reproducible surface quality and dimensional control. Cermet grade GT720 for fine finishing 0.4 mm nose radius for precise profiles Square SNMA form, 90° cutting edge Cylindrical hole for secure clamping High-quality finishing and predictable tool life The GT720 grade is a cermet formulation developed to balance wear resistance with excellent surface finish. Its composition and coating promote uniform wear, which helps maintain dimensional accuracy over longer series runs. For operations that prioritise part quality and reduced rework, the combination of a fine cutting edge and the 0.4 mm nose radius supports tight radii and controlled chip formation, resulting in fewer downstream operations and stable finish values. Seamless integration into ISO tooling systems Designed to ISO conventions, the insert’s compatibility depends on form, relief angle, tolerance class, fastening, size and thickness. The square SNMA geometry with a 90° approach angle simplifies set-up for conventional external and internal turning. The insert sits within a system that typically includes an appropriate holder or boring bar, a support pad or clamp set and replacement screws, so toolroom planning focuses on matching the holder contour and clamping method rather than custom tooling. Application focus and machining benefits Intended for finishing to light cutting, this insert performs well in turning steel where surface quality and repeatable dimensional results matter most. The absence of an integrated chipbreaker means selection of cutting data and grade should match workpiece stability and process strategy. When deployed with appropriate feeds and speeds, the grade reduces the need for manual finishing, contributes to cycle-time stability and supports efficient, predictable serial production. Contact Metav Werkzeuge for application advice and to request the SNMA120404 GT720 insert or tailored cutting recommendations for precision turning. Technical Data Article number: 6851507 Manufacturer SKU: TUN6851507 Model series: ISO-Drehwendeschneidplatten ISO designation: SNMA120404 Thickness: 4.76 mm Facts Size: 12 Corner radius: 0.4 mm Relief angle: 0° Cutting edge angle: 90° Special features Grade: GT720 (cermet / coated cermet) Material: Hartmetall Plate form: Square Hole: With cylindrical hole Application: Turning System components: Insert, holder/boring bar, support/clamp set, replacement screws FAQ What applications is this insert best suited for? The SNMA120404 GT720 insert is aimed at finishing and light turning of steel where surface quality and dimensional consistency are priorities. Which holder types are compatible with this insert? Compatibility follows ISO geometry; the SNMA form fits matching square external holders or boring bars designed for ISO inserts with a cylindrical centre hole. How does the GT720 grade affect machining performance? GT720 is a cermet-based grade tuned for good surface finish and uniform wear, supporting consistent part quality across production batches. Is this insert supplied with a chipbreaker? This variant is specified without an integrated chipbreaker; chip control should be achieved through grade selection and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120404 T5105 Wendeplatten - Tungaloy
Take advantage of the CVD-coated cemented carbide grade T5105 and the square SNMA 120404 form to achieve consistent high-speed turning of cast iron; the 0.4 mm corner radius and 0° clearance help deliver reliable finishing where stability and surface quality are essential. Order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMA 120404 T5105 – Tungaloy turning insert, CVD-coated cemented carbide, 90° square SNMA120404 T5105 is an ISO-format turning insert designed for high-speed machining of cast iron under stable cutting conditions CVD-coated cemented carbide for high speeds Square ISO SNMA form, 90° included angle 0.4 mm corner radius for fine finishing Cylindrical hole for secure attachment Consistent edge performance for productive turning The CVD-coated cemented carbide of grade T5105 is engineered to maintain a stable cutting edge during continuous, high-speed turning of cast iron. The coating improves wear resistance and reduces adherence of abrasive particles, which translates into longer effective tool life and fewer interruptions in production. With a controlled chip flow in stable setups, the insert supports predictable cycle times and consistent surface finish — a clear efficiency gain for serial machining where repeatability matters. Designed to fit standard ISO tooling systems reliably Compatibility with tool holders is governed by the insert form, 0° relief, tolerance class, fastening method and the plate’s dimensions. The SNMA geometry is an ISO standardised square insert with a 90° included angle, allowing it to be used in a wide range of external and internal turning holders. The central cylindrical hole ensures positive clamping; matching the holder by shape and thickness (plate thickness 4.76 mm) secures correct seat and repeatable positioning for stable machining operations. Small radius, precise finishing and versatile application The 0.4 mm corner radius provides a balance between light finishing and adequate strength for interrupted cuts when conditions are steady. In combination with the square geometry, this radius performs well for profile work and general turning where a finer edge is required. Opting for a grade without an integrated chipbreaker means chip management must be matched to the machine setup and workpiece; the result is a versatile insert that can be tuned for finishing or general-purpose turning by selecting appropriate cutting parameters and holder geometry. Practical selection guidance and process benefits Choosing the right insert grade and matching holder is essential: select the T5105 grade for high-speed cast-iron operations under stable conditions; consider a different grade or a variant with a chipformer when facing severe interruptions or poor rigidity. The square SNMA form offers balanced strength and multiple indexable edges, which can reduce tooling cost per component in lot production. For customers seeking predictable tool life and a controlled surface outcome, this configuration supports efficient machining with clear process advantages. For high-speed cast-iron turning with reliable Tungaloy performance, contact Metav Werkzeuge for availability, technical matching and local delivery — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6853004 Manufacturer SKU: TUN6853004 SKU: 6853004-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Core dimensions ISO designation: 120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 90° Relief angle: 0° Special features Material: cemented carbide Coating / grade: CVD-coated, T5105 Plate form: square Hole: with cylindrical hole Chipbreaker: without chipbreaker Application: turning Typical compatibility criteria: form, relief, tolerance, fastening, size, thickness FAQ What applications suit this insert best? This SNMA120404 T5105 turning insert (Tungaloy, SKU 6853004-Tungaloy) is intended mainly for high-speed machining of cast iron in stable setups, including external and internal turning. Is the insert compatible with common ISO holders? Yes; the SNMA geometry is ISO-standard and will fit holders that accept SNMA plates when the holder matches the plate thickness, form and clamping method. How does the T5105 grade affect tool life? The CVD-coated T5105 grade is designed for wear resistance at high cutting speeds on cast iron; this typically extends edge life under steady conditions compared with uncoated grades. Does this insert include a chipbreaker? No, the insert is supplied without an integrated chipbreaker, so chip control depends on holder geometry and cutting parameters. What finishing capability does the 0.4 mm radius offer? The 0.4 mm corner radius supports fine finishing and profile work while retaining enough edge strength for light interruptions in stable machining environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, CVD‑coated carbide and compact dimensions for stable turning performance; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. SNMA 120404 T5115 — Square ISO turning insert, CVD‑coated carbide — Tungaloy SNMA 120404 T5115 is an ISO‑standard square turning insert designed for external and internal turning of cast components, offering a balance of wear resistance and edge stability ISO‑compliant square insert 12 mm CVD‑coated carbide grade T5115 0° relief angle for axial engagement Cylindrical hole for secure clamping Consistent geometry for predictable machining results The SNMA120404 T5115 insert follows the ISO form series for indexable turning, which simplifies tool planning and spare‑part logistics. Standardised geometry ensures repeatable seat and clamping characteristics when paired with compatible holders, reducing setup-related variation. The ISO conformity also supports machine programming consistency and makes it easier to select alternative inserts with matching form and tolerance classes. The CVD‑coated carbide substrate provides a layer that raises wear resistance under typical cast‑iron cutting conditions while preserving a stable cutting edge. Balanced grade and edge design for cast‑iron turning The T5115 grade has been engineered as a universal option for cast iron, offering an even compromise between longevity and edge robustness. This allows quieter transitions between roughing and light finishing without immediate edge chipping. The absence of an integrated chipbreaker on this insert makes it important to match tool geometry and cutting parameters to the component and machining strategy; when a defined chip form is required, a dedicated chipbreaker or tailored machining pass should be selected. The 0° relief angle and corner radius 0.4 mm help maintain contact stability on interrupted cuts and support predictable tool life. Compact dimensions and secure clamping reduce downtime The insert’s 12 mm nominal size and 4.76 mm plate thickness are optimised for common square‑format holders, providing a large bearing surface for clamping and a rigid cutting interface. The square form with a cylindrical hole allows positive axial and radial location in many standard carrier designs, improving repeatability across indexings. The geometric combination supports low‑vibration engagement at a 90° approach, which is advantageous for facing operations and short overhang setups where rigidity and dimensional control matter. Practical advice for stable, cost‑effective turning Selecting the correct holder, clamp set and fastening torque is decisive for the insert’s performance: matching the insert form and tolerance to the toolholder avoids unwanted micro‑movements and premature wear. As an indexable insert in an ISO series, the component benefits from straightforward rotation and replacement, which lowers machine downtime and supports predictable maintenance cycles. For complex parts or uncertain material mixes, technical consultation is recommended to tune feed, speed and depth of cut to the application and to choose a suitable chip control strategy. Contact Metav Werkzeuge for tailored application advice on the SNMA 120404 T5115 insert and availability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6853005 SKU: 6853005-Tungaloy Manufacturer SKU: TUN6853005 Model series: ISO turning inserts Designation: SNMA120404 Grade: T5115 Manufacturer: Tungaloy Facts Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 90° Relief angle: 0° Hole: with cylindrical hole Special features Square plate form CVD‑coated carbide Universal grade for cast iron No integrated chipbreaker Compatibility determined by form, relief angle, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The SNMA 120404 T5115 insert (Tungaloy, SKU 6853005‑Tungaloy) is optimised as a universal grade for machining cast iron, offering a balance of wear resistance and edge stability. Does the insert include a chipbreaker? This insert is supplied without an integrated chipbreaker; chip control must be achieved with an appropriate holder design, machining parameters or a dedicated chip‑control insert alternative. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; use ISO‑compliant square carriers sized for 12 mm inserts for reliable seating. How does the coating affect performance? The CVD coating enhances wear resistance under typical cast‑iron cutting regimes, helping to maintain edge integrity and extend effective tool life during production runs. Is the corner radius suitable for finishing? The 0.4 mm corner radius provides a compromise between strength and surface finish, suitable for semi‑finishing and certain finishing passes when paired with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120408 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, Tungaloy FX105 grade and a compact square form for stable, repeatable turning operations; order directly via Metav Werkzeuge or request application advice from our consultants. SNMA 120408 FX105 Tungaloy Turning Insert — ISO square turning insert for general turning A SNMA120408 FX105 Tungaloy insert engineered for external and internal turning where ISO compatibility and predictable edge performance are essential ISO‑standard square insert 12 × 12 mm FX105 Tungaloy grade for wear and edge stability 0° rake with 0.8 mm corner radius Dependable ISO compatibility for predictable tool cycles The insert follows the ISO designation for a square turning format, ensuring straightforward interchangeability with standard holders. The nominal size of 12 mm and the plate thickness of 4.76 mm are part of an established system: the insert, a matched external holder or boring bar, a backing shim and a clamping set with replacement screws. The presence of a cylindrical hole and a central bore influences clamping geometry, so compatibility is determined by holder form, clearance angle, tolerance class, fixing method, size and thickness — all factors that contribute to repeatable set‑up and reduced machine downtime. This systematic approach reduces administrative complexity in tool inventory and supports consistent production flow. Grade and geometry that extend service intervals The Tungaloy FX105 grade combines wear resistance and toughness to provide edge stability under varied turning conditions. Manufactured from cemented carbide, the grade is intended to complement insert geometry with a balanced focus on resistance to abrasive wear and retention of a sharp cutting edge. The combination of a 0.8 mm corner radius and a 0° rake supports robust flank strength while enabling controlled cutting forces for many common turning tasks. In practice, this means longer intervals between indexings, more consistent surface finishes and fewer unexpected tool changes — advantages that translate directly to higher net productivity and lower process variability. Operational benefits and recommended assembly for productivity Designed for general turning, the insert is suitable for both external and internal operations when matched with the appropriate chip control and holder stability. Selecting a chipbreaker and grade aligned with the workpiece and machining strategy is essential: stable clamping and an optimised holder increase vibration resistance and allow the FX105 grade to deliver its intended durability. The square plate geometry provides four usable edges, and the central cylindrical hole aids secure clamping and repeatable seating. When integrated as part of a complete system — insert, holder, backing shim and clamping hardware — the configuration promotes faster index changes and consistent dimension control, supporting higher throughput and predictable component quality. Choose the FX105 grade from Tungaloy for stable machining performance and contact Metav Werkzeuge for tailored advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6806620 SKU: 6806620-Tungaloy Manufacturer SKU: TUN6806620 Model series: ISO-Drehwendeschneidplatten Application: Turning Facts ISO code: 120408 Insert designation: SNMA120408 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Rake / relief angle: 0° Included hole: with cylindrical hole Angle: 90° Special features Grade: FX105 (Tungaloy) Material: cemented carbide Plate form: square Typical system components: insert, external holder/boring bar, backing shim, clamp set, replacement screws FAQ What turning operations is this insert intended for? The SNMA120408 FX105 Tungaloy insert is intended for external and internal turning where ISO‑standard inserts are specified, offering four usable edges and reliable seating via its cylindrical hole. How does the FX105 grade affect tool life? The FX105 Tungaloy grade provides a balance of wear resistance and toughness, which supports extended tool life and consistent edge stability during many turning applications. Which holder characteristics must be considered for correct compatibility? Compatibility requires matching holder form, relief angle (rake), tolerance class, fixing method, size and thickness; these determine correct seating and clamping of the insert. What is the effect of the 0.8 mm corner radius in machining? A 0.8 mm corner radius increases flank strength and improves surface finish stability under moderate cutting conditions while influencing permissible cutting depths and feed rates. Is the insert supplied as a complete system? The SNMA120408 FX105 is supplied as the insert itself; the complete system typically consists of the insert, a matched holder or boring bar, backing shim and clamping hardware selected to suit the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120408 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a wear‑resistant cermet grade and a compact square format to ensure consistent finishing results and predictable tool life; order directly via Metav Werkzeuge or request advice from the consultants for optimal holder selection. SNMA120408 NS520 indexable turning insert (square, 12 mm) – Tungaloy A SNMA120408 NS520 indexable insert engineered for fine to light turning operations on steel, optimised for surface quality and dimensional stability ISO‑standard SNMA insert format Cermet grade NS520 for fine finishing 12 mm square with 0.8 mm corner radius Cylindrical hole and 0° relief angle Consistent finishing and predictable wear for high-quality parts The SNMA120408 NS520 insert delivers a controlled cutting performance geared towards finishing and light machining of steel. The NS520 cermet composition combines high hardness with a stable wear pattern, which supports an improved surface finish and long‑term dimensional accuracy. Due to the material properties of the cermet and the square geometry, the cutting edge maintains form under steady cutting conditions, resulting in fewer interruptions for insert changes and a more predictable process flow. This benefit is particularly relevant where repeatable part quality and minimised rework are required. Clear compatibility and secure mounting for process reliability Designed to the ISO SNMA format, compatibility with holders is governed by shape, relief angle, tolerance class, fastening and thickness. The insert features a cylindrical hole for secure clamping and a 0° relief angle that suits conventional external and internal turning arrangements. Specifying the correct holder geometry and clamping set ensures proper seat contact and repeatable indexability, reducing the risk of movement or chipping during operation. The standardised format simplifies tool inventory management and reduces setup time across multiple machines. Material selection and application advantages for steel finishing The insert is supplied in a cermet or coated cermet variant under the NS520 grade, paired with a cemented carbide substrate that promotes stable cutting at finishing feeds. The square 12 mm form with a corner radius of 0.8 mm is tailored to produce refined edge transitions while maintaining sufficient edge strength for light interrupted cuts. The result is a balance between excellent surface quality and predictable wear behaviour, making this grade suitable for components where surface integrity and dimensional tolerance are priorities. For dependable finishing performance with Tungaloy’s NS520 cermet inserts, contact Metav Werkzeuge for tailored holder recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6806621 Manufacturer SKU: TUN6806621 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Core data Insert designation: SNMA120408 Size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Special features Grade: NS520 (cermet / coated cermet) Material: cemented carbide substrate Shape: square Hole: with cylindrical hole Chipbreaker: without Typical application: external and internal turning; finishing to light machining of steel Compatibility determined by holder form, relief angle, tolerance class, fastening, size and thickness FAQ What types of operations is this insert suited for? This indexable turning insert is designed primarily for finishing and light machining operations on steel; the NS520 grade emphasises surface quality and dimensional control. How is the insert secured in the holder? The SNMA120408 features a cylindrical hole and matches ISO SNMA clamping systems; proper holder geometry and clamping ensure repeatable seat contact and secure fixation. Can this grade be used for interrupted cuts? The cermet composition and the 0.8 mm corner radius provide reasonable edge strength for light interruptions, but the grade is optimised for continuous finishing passes. How does the NS520 grade affect surface finish? NS520’s cermet properties promote low and even wear, which helps maintain a consistent cutting edge and thus improved and repeatable surface quality across multiple parts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120408 T505 Wendeplatten - Tungaloy
SNMA120408 T505 Wendeplatte für Drehen von Tungaloy SNMA120408 T505 ist eine ISO-genormte quadratische Wendeplatte für das Außen- und Innendrehen, entwickelt für wirtschaftliche Gussbearbeitung und kompatibel zu gängigen ISO-Haltern ISO-genormte quadratische Wendeplatte CVD-beschichtetes Hartmetall T505 Speziell für wirtschaftliche Bearbeitung von Gusseisen Zylindrisches Loch, kompatibel zu ISO-Haltern Eckenradius 0,8 mm für stabile Spanbildung Höhere Produktivität durch wirtschaftliche Schneidstoffauswahl Die CVD-beschichtete Hartmetall-Sorte T505 bietet eine abgestimmte Balance aus Verschleißschutz und Zähigkeit, wodurch die Standzeit bei der Bearbeitung von Gusseisen erhöht wird. Anwender profitieren von geringeren Rüstzyklen und konstanteren Bearbeitungsparametern, weil die Beschichtung thermisch stabil ist und die Schneidkante vor abrasivem Verschleiß schützt. Dadurch reduziert sich der Zeitaufwand für Werkzeugwechsel und Nacharbeit, was die Ausbringung und Kosten pro Bauteil verbessert. Passgenauigkeit und sichere Spanntechnik für wiederholgenaue Ergebnisse Dank der ISO-Genormung und der quadratischen Plattenform gewährleistet die Wendeplatte eine einfache Integration in standardisierte Außenhalter oder Bohrstangen. Das zylindrische Loch und die Plattendicke von 4,76 mm sorgen für zuverlässige Spannung; der Freiwinkel 0° beeinflusst die Schnittkräfte und ist besonders geeignet für stabile Halteraufbauten. Diese Merkmale erleichtern die Auswahl kompatibler Halter und minimieren Spiel- oder Justagefehler bei Serienläufen. Zielgerichteter Einsatzbereich und Auswahlkriterien für Bearbeitungsaufgaben Für Außen- und Innendrehen mit Schwerpunkt Gusseisen empfiehlt sich die Wahl von SNMA-Platten, wenn hohe Zerspanungsraten bei stabiler Spanbildung gewünscht sind. Die Eckenradius 0,8 mm bietet eine gute Kombination aus Kantenschärfe und Bruchfestigkeit; bei instabilen Halterungen oder stoßender Zustellung sind größere Radien oder spezielle Spanbrecher zu prüfen. Anwender in der Serienfertigung und in Lohnbetrieben erzielen so konstante Oberflächenqualitäten bei wirtschaftlichem Verschleißverhalten. Praktische Hinweise zur Anwendung und Schnittwertoptimierung Beim Einrichten hat sich bewährt, auf festen Sitz der Platte und gleichmäßige Anzugsmomente zu achten, damit die Schneidkante ihre Geometrie behält. Ein stabiler Halter und passende Unterlage verhindern Vibrationen, was die Standzeit verlängert und Nacharbeit reduziert. Wenn die Bearbeitung unterbrochene Schnitte oder schwankende Zustellungen umfasst, empfiehlt sich die Abstimmung der Schnittgeschwindigkeit und Vorschubrate auf die T505-Sorte, um Mikrorisse an der Schneidkante zu vermeiden. Für wirtschaftliche Gussbearbeitung empfehlen wir die SNMA120408 T505 von Tungaloy; technische Beratung und Verfügbarkeit erhalten Sie direkt bei Metav Werkzeuge per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6831338 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: SNMA120408 Daten Eckenradius: 0,8 mm Winkel: 90° Plattendicke: 4,76 mm Plattengröße: 12 mm Besonderheiten Material: Hartmetall Beschichtung: T505 (CVD-beschichtet) Plattenform: quadratisch Freiwinkel: 0° Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: ohne Schneidstofftyp: CVD-beschichtetes Hartmetall Anwendung: Drehen Typische Anwendung: Außen- und Innendrehen SKU Hersteller: TUN6831338 Hersteller Artikelnummer: 6831338 FAQ Welche Werkstoffe lassen sich mit der SNMA120408 T505 bearbeiten? Die SNMA120408 T505 von Tungaloy wurde primär für die wirtschaftliche Bearbeitung von Gusseisen entwickelt; durch die CVD-Beschichtung T505 ist sie gut geeignet für abrasive Gusswerkstoffe und häufige Serienläufe. Welche Plattengröße und Dicke hat die Wendeplatte? Die Wendeplatte SNMA120408 hat eine Plattengröße von 12 mm und eine Plattendicke von 4,76 mm, was eine robuste Spannfläche und gute Stabilität im Halter ermöglicht. Ist die Platte mit gängigen ISO-Außenhaltern kompatibel? Ja, die SNMA120408 entspricht ISO-Normen und verfügt über ein zylindrisches Loch, sodass sie mit standardisierten Außenhaltern und Bohrstangen verwendbar ist, sofern Form, Freiwinkel und Toleranzklasse passen. Für welche Schnittbedingungen eignet sich die Sorte T505? Die Sorte T505 empfiehlt sich bei mittleren bis hohen Schnittgeschwindigkeiten in Gusseisen, wenn eine ausgewogene Kombination aus Standzeit und Kantensicherheit benötigt wird. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Der Eckenradius 0,8 mm der SNMA120408 sorgt für stabile Spanbildung und erhöhte Kantenzähigkeit; das führt zu gleichmäßigeren Oberflächen und reduziert die Neigung zu Mikroausbrüchen bei moderaten Schnittkräften. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMA 120408 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO compatibility and a 0.8 mm corner radius for reliable, high-speed turning of cast iron; order directly via Metav Werkzeuge or contact our consultants for application guidance. SNMA120408 T5105 ISO indexable turning insert — CVD-coated carbide, 0.8 mm radius (Tungaloy) The SNMA120408 T5105 is an ISO-standard square indexable insert for external and internal turning, designed for high-speed machining of cast iron under stable conditions and delivered with a cylindrical fixing hole. CVD-coated carbide for wear resistance ISO SNMA 120408 square insert 0.8 mm corner radius for stable cuts 90° geometry with cylindrical hole Higher throughput through a wear‑resistant cutting grade The combination of the T5105 CVD-coated carbide grade and a geometry intended for stable setups delivers measurable gains in throughput and consistency. The CVD-coated surface reduces flank wear during extended high-speed cycles, which translates into longer tool life and fewer index changes. For operations focusing on cast iron, the coating and substrate composition favour heat resistance and edge stability, enabling higher cutting speeds without compromising component tolerances. This results in shorter cycle times and more predictable production runs. System compatibility that simplifies tool setup Being an ISO-standard SNMA insert, the component fits into established clamping systems where form, clearance angle, tolerance class, fastening method, size and thickness determine compatibility. The square form with 90° geometry and a cylindrical fixing hole ensures secure locating in matched external holders or boring bars. Clear specifications for size (12 mm), thickness (4.76 mm) and the nominal 0.8 mm radius facilitate straightforward integration into existing tool lists and reduce setup time. Where holders are preselected for SNMA inserts, interchangeability supports rapid replenishment and consistent repeatability across batches. Practical guidance for machining and surface quality The neutral relief specification and absence of an integrated chipbreaker make this grade especially suitable where a robust cutting edge and predictable chip flow are required; the lack of a built-in chipformer means a chip management strategy should be chosen according to the workpiece and stability of the setup. The 0° relief angle and 0.8 mm radius combine to offer a balance between edge strength and surface finish: the larger corner radius improves load distribution for roughing passes, while maintaining a controllable cutting edge for finishing when machine rigidity permits. Select a chipbreaker and feed rate matched to component geometry to achieve the desired surface integrity with minimal rework. For application recommendations or to procure the Tungaloy SNMA120408 T5105 insert from Metav Werkzeuge, contact our technical team via info@metav-werkzeuge.com or call +49 2822 7131930 — expert advice and prompt supply are available Technical data Article number: 6850255 Manufacturer SKU: TUN6850255 Model series: ISO turning indexable inserts Grade: T5105 Material: carbide Facts Shape: square Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Hole style: cylindrical hole With hole: yes Special features CVD coating Designed for cast iron machining No chipbreaker ISO SNMA 120408 designation Suitable for external and internal turning FAQ What materials is this insert suitable for? The Tungaloy SNMA120408 T5105 insert is formulated for machining cast iron under stable cutting conditions and performs well in high-speed turning applications. How does the 0.8 mm corner radius affect performance? A 0.8 mm radius increases cutting-edge strength and distributes cutting forces, which is beneficial for heavier cuts and contributes to improved tool life and process stability. Is a chipbreaker included with the insert? This grade is supplied without a chipbreaker, allowing selection of a chip control solution tailored to the specific workpiece material and machining setup. Can this insert be used in standard SNMA holders? Yes, the insert conforms to the ISO SNMA 120408 form and will fit holders designed for SNMA inserts provided the holder matches form, clearance, tolerance, fastening and thickness requirements. What is the significance of the T5105 grade? The T5105 designation indicates a CVD-coated carbide grade optimised for wear resistance and high-speed performance, particularly when machining cast iron with stable fixturing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120408 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated cemented carbide and the T5115 universal grade for reliable cast iron turning; the ISO-compliant geometry and 0.8 mm corner radius support consistent surface finish and tool life. Order or request technical advice directly via Metav Werkzeuge for precise selection and delivery. SNMA120408 T5115 — SNMA indexable turning insert for turning, CVD-coated cemented carbide by Tungaloy A SNMA120408 T5115 indexable insert designed for ISO-compliant external and internal turning, optimised for cast iron machining and stable production cycles CVD-coated cemented carbide for durability Universal grade T5115 for cast iron machining Square 12 mm insert, 4.76 mm thick 0.8 mm corner radius and 90° geometry Higher output through process-stable cutting performance The combination of a CVD-coated surface and cemented carbide substrate ensures consistent cutting behaviour and extended edge life in serial turning. The T5115 grade balances wear resistance and edge stability, reducing unplanned tool changes and improving machine utilisation. For practical terms: the coating increases resistance to abrasive wear common in cast iron, while the carbide core maintains rigidity under interrupted cuts, translating into fewer stoppages and steadier component quality. Seamless integration into ISO tool systems saves setup time Designed as an ISO-compliant turning insert, the plate fits standard holders when form, clearance angle and tolerance class match. The 12 mm size and 4.76 mm thickness conform to common clamping systems, while the cylindrical hole enables secure screw fixing. This standardised form factor simplifies inventory management and reduces adapter requirements, enabling quicker changeovers and predictable tool performance across different lathes and setups. Tailored grade and geometry for cast iron applications As a universal option for cast iron, the T5115 grade provides a pragmatic balance between flank wear control and edge robustness. The insert is supplied without a chipbreaker, giving the operator freedom to select the most suitable chip control item for the workpiece and cutting conditions. The 0.8 mm corner radius and 90° insert geometry support stable engagement and good surface integrity when turning common grey and nodular cast irons. Robust design for repeatable production quality The square form and central cylindrical hole offer reliable clamping and the potential for multiple indexings, extending usable life per insert. In repetitive production, this leads to improved repeatability and consistent component tolerances. The insert’s compatibility with ISO turning systems also facilitates predictable process planning, making it a practical choice for workshops seeking a balance of economy and consistent results with cast iron components. Contact Metav Werkzeuge today for availability and tailored application advice on the Tungaloy SNMA120408 T5115 indexable turning insert Technical data Manufacturer article number: 6850256 SKU: 6850256-Tungaloy Manufacturer SKU: TUN6850256 Model series: ISO turning indexable inserts Designation: SNMA120408 Core specifications Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Geometry angle: 90° Free angle: 0° Hole: with hole Hole style: cylindrical hole Plate form: square Materials and features Material: cemented carbide Coating: CVD-coated Grade: T5115 Application: turning (external and internal) Chipbreaker: none Compatibility: ISO holders (form and tolerance-dependent) Typical use: cast iron machining FAQ What materials is this insert best suited for? The SNMA120408 T5115 insert is a universal option optimised for cast iron; the T5115 grade and CVD-coated cemented carbide substrate provide a balance of wear resistance and edge stability suited to grey and nodular cast irons. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO geometry conventions; compatibility depends on holder form, free angle, tolerance class, clamping method, size and thickness — the SNMA120408 is a 12 mm square insert, 4.76 mm thick. Does the insert include a chipbreaker? This particular variant is supplied without a chipbreaker, allowing selection of a matching chip control accessory to suit the specific cast iron grade and cutting strategy. How many edges can be used before replacement? Edge count depends on cutting conditions and material; the square SNMA120408 typically offers multiple indexings, and the T5115 grade aims to extend usable life through balanced wear properties. What clamping method does the insert require? The insert uses a central cylindrical hole for screw clamping in compatible ISO-style holders, ensuring secure retention and repeatable positioning Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120408 T5125 Wendeplatten - Tungaloy
Benefit from the CVD-coated T5125 grade and a 0.8 mm corner radius for greater resistance to chipping during interrupted turning. The ISO SNMA 120408 geometry and 12 mm size deliver a compact, rigid cutting edge for external and internal turning, especially in cast-iron applications. Order the SNMA120408 T5125 insert directly via Metav Werkzeuge or consult the technical advisors if needed. SNMA 120408 T5125 SNMA turning insert by Tungaloy (CVD-coated carbide, 12 mm, 0.8 mm radius) The SNMA120408 T5125 is an ISO-standard square indexable insert developed for precision external and internal turning; it is optimised for cast-iron machining and intermittent cuts. CVD-coated carbide grade T5125 ISO SNMA 120408 square insert, 12 mm size 0.8 mm corner radius for robustness Suited for cast iron and interrupted cuts Reliable cutting performance for interrupted turning The insert delivers a balance between toughness and wear resistance thanks to the CVD-coated carbide T5125 grade. This composition provides improved resistance to thermal and mechanical loads commonly encountered during interrupted turning of cast iron, helping to reduce edge chipping and unplanned tool changes. The square geometry with a 90° included angle adds rigidity at the cutting zone, which stabilises the cutting process and supports consistent surface finish and dimensional control. Practical geometry that eases setup and compatibility Designed as an ISO SNMA 120408 type, the insert offers a compact 12 mm dimension and a thickness of 4.76 mm, with a cylindrical hole for secure clamping. The 0° relief angle and the 0.8 mm corner radius enhance edge strength while maintaining accessibility for fine turning passes. Compatibility with holders depends on form, relief, tolerance class, fastening method, size and thickness, so the cartridge-style system—insert, matching external holder or boring bar, shim/clamp set and replacement screws—ensures straightforward assembly and reproducible clamping. Broad application scope and machining economy The grade and design suit both external and internal turning operations where interrupted cuts or less-stable set-ups demand a tougher grade. The absence of an integrated chipbreaker in this variant provides flexibility: a suitable chip control solution can be selected according to workpiece material and process stability. Overall, the geometry and coating support longer service life and stable productivity, contributing to reduced tool-change downtime and predictable process behaviour in production environments. For precise tool selection and to ensure optimal holder compatibility for the Tungaloy SNMA120408 T5125 insert, contact Metav Werkzeuge for technical advice or to request a customised recommendation based on the machining scenario. Email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850257 Manufacturer SKU: TUN6850257 SKU: 6850257-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Shape: Square Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Hole: with hole (cylindrical) Coating: CVD Grade: T5125 Material: Carbide Manufacturer: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Hole style: cylindrical Special features ISO SNMA 120408 geometry CVD-coated carbide substrate Suited for cast-iron machining No integrated chipbreaker Square insert for external and internal turning Compatible with standard clamping sets FAQ What materials is this insert intended for? The SNMA120408 T5125 insert is specified for machining cast iron, with the tougher T5125 grade chosen for interrupted cuts and less-stable conditions. Does the insert include a chipbreaker? This variant is supplied without an integrated chipbreaker, allowing selection of a chip control solution that matches the workpiece and process stability. Which holders are compatible with the SNMA120408 geometry? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the SNMA120408 follows ISO standards for square turning inserts and fits matching ISO external holders or boring bars. What does the 0.8 mm corner radius affect in practice? A 0.8 mm corner radius increases edge strength and resistance to chipping during interrupted cuts, while still enabling acceptable surface finish for general turning tasks. How does the CVD coating influence tool life? The CVD coating enhances wear resistance at elevated temperatures and supports stable cutting performance, which can extend service intervals under typical cast-iron turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120408 T515 Wendeplatten - Tungaloy
Benefit from a combination of economical machining, CVD‑coated carbide performance and stable chip formation for productive turning operations; order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. SNMA120408 T515 ISO turning insert for external and internal turning — Tungaloy SNMA120408 T515 is an ISO‑standard square turning insert designed for economical, high‑productivity machining of cast iron using a CVD‑coated carbide grade. CVD‑coated carbide grade T515 for cast iron Square ISO insert 90° with 0.8 mm corner radius Cylindrical‑hole fixing for secure clamping Compatible with ISO turning holders and toolholders Higher productivity through adapted grade and geometry The combination of a CVD‑coated carbide grade and an ISO square geometry delivers a clear productivity advantage when machining cast iron. The coating increases wear resistance and thermal stability, which extends tool life and reduces changeover frequency. With a 0.8 mm corner radius and a 90° approach, the insert provides predictable cutting forces and consistent contact conditions, allowing machining parameters to be optimised for greater material removal rates without sacrificing surface integrity. Secure clamping and repeatable cutting performance A cylindrical locating hole and standardised fixing ensure the insert is held securely in the seat, which reduces vibration and improves surface finish. The ISO form and tolerance classes mean the component is compatible with a wide range of external holders and boring bars; this simplifies tool inventory and helps standardise setups on the shop floor. The result is more repeatable machining cycles and fewer rejects due to geometric variation. Simple selection for cast‑iron turning tasks The grade is specifically intended for economical machining of cast iron, making the selection process straightforward: choose this grade where interrupted cuts are moderate and stable setups are available. The absence of an integrated chipbreaker in this variant focuses the benefit on stable chip formation driven by the geometry and process parameters. For users unfamiliar with the terminology: CVD coating refers to a chemical vapour deposition layer that improves surface hardness and heat resistance, while the corner radius influences edge strength and profile accuracy. System compatibility and maintenance benefits The insert is supplied in the ISO designation SNMA120408 and fits established holder systems when the correct form, clearance, tolerance and clamping arrangement are observed. The 4.76 mm plate thickness and square plate form deliver robust support in the pocket. Fewer tool changes, thanks to the grade’s wear behaviour, directly reduce downtime and contribute to lower total machining costs. For everyday workshop planning, this means longer uninterrupted runs and a predictable maintenance cadence. For application advice or to secure supply of Tungaloy turning inserts, contact Metav Werkzeuge for tailored recommendations and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6733832 SKU manufacturer: TUN6733832 Manufacturer SKU: 6733832-Tungaloy Numbers / Core technical data Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Approach/wedge angle: 90° Clearance angle: 0° ISO code: 120408 Special features / Versions Grade: T515 Carbide: CVD‑coated carbide Plate form: square Hole: with cylindrical hole Chipbreaker: none Typical application: external and internal turning of cast iron Series: ISO turning indexable inserts FAQ What materials is this insert intended for? The SNMA120408 T515 insert is specified for the economical machining of cast iron; the T515 grade and CVD‑coated carbide backing provide wear resistance suited to that material group. Which clamping style is required for this insert? A cylindrical‑hole clamping arrangement is used for this square ISO insert; it is designed to be fixed with the matching screw, seat and pad as found on ISO‑compliant holders. How does the 0.8 mm corner radius affect machining? The 0.8 mm radius increases edge strength and helps absorb intermittent cutting loads, improving edge life and producing a consistent surface profile on turned components. Is a chipbreaker included with this insert? This version does not include an integrated chipbreaker; the geometry and process parameters should be chosen to ensure controlled chip formation during turning. Can the insert be used for both external and internal turning? Yes, the SNMA120408 design is suitable for both external and internal turning when paired with the appropriate ISO external holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120408 TH10 Wendeplatten - Tungaloy
Benefit from the combination of ISO‑standard geometry, the sharp TH10 uncoated carbide grade and a 0.8 mm corner radius for consistent turning performance and clean surface finishes; order directly via Metav Werkzeuge or consult our specialists for material-specific guidance. SNMA120408 TH10 — Tungaloy indexable insert for turning The SNMA120408 TH10 is an ISO‑standard indexable insert designed for external and internal turning applications, delivering low cutting forces and improved surface quality in non‑ferrous and similar materials. ISO‑standard SNMA geometry Uncoated carbide grade TH10 0.8 mm corner radius for versatile cuts Cylindrical hole, 12 mm plate size Consistent cutting performance with a sharp uncoated grade The uncoated TH10 carbide grade is formulated as a sharp universal solution for non‑ferrous materials, where a clean cutting edge and low cutting forces are decisive. The combination of an uncoated cutting edge and the insert’s geometry results in reduced burr formation and improved surface finish, especially on aluminium alloys and messings. In practice, this means fewer downstream operations and more predictable cycle times on small to medium lathes. The sharp edge is also advantageous when machining delicate contours or thin‑walled parts, as reduced forces lower the risk of distortion during turning. Predictable fit and secure clamping for interchangeability Compliance with ISO dimensions ensures that the insert matches holders defined by form, clearance angle and tolerance class. The square form, 12 mm plate size and 4.76 mm thickness pair with the centrally located cylindrical hole to allow secure mounting and straightforward replacement. The insert’s 0° clearance and the 90° included angle offer a standard engagement geometry that is familiar to workshops and simplifies tool inventory management. Because compatibility is determined by form, free angle, tolerance class, fixing method, size and thickness, the insert is suitable for most ISO‑compatible holders once these parameters are checked. Productivity advantages and recommended applications Choosing a universal, sharp insert such as this can reduce setup complexity and inventory variety while maintaining processing quality. The 0.8 mm corner radius provides a balance between robustness and finishing capability, suitable for light to medium turning operations. Without an integrated chipbreaker, the insert performs best in continuous cuts and applications where chip control is managed by cutting conditions or external assistance. Typical use cases include finishing and light roughing on aluminium, messings, plastics and other non‑ferrous materials where low cutting forces and clean surfaces are priorities. For tailored recommendations on feeds, speeds and holder selection, Metav Werkzeuge’s technical advisors can provide data‑driven guidance. For precise turning results with Tungaloy’s TH10 uncoated carbide, contact Metav Werkzeuge for application advice or to request a quotation — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article name: SNMA120408 TH10 Tungaloy‑Wendeplatte Manufacturer article number: 6806624 Vendor SKU: 6806624-Tungaloy Manufacturer SKU: TUN6806624 Facts Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Hole: with cylindrical hole Special features Material: carbide Grade: TH10 (uncoated) Shape: square Chipbreaker: none Application: turning Model series: ISO turning indexable inserts Compatibility: ISO‑standard geometry; holder fit depends on form, clearance angle, tolerance class, fixing, size and thickness FAQ What materials is this insert best suited for? The SNMA120408 TH10 Tungaloy indexable insert (SKU: 6806624‑Tungaloy) is optimised for non‑ferrous materials such as aluminium and brass, and for applications where a sharp, uncoated cutting edge supports low cutting forces and a clean surface finish. How does the insert clamp to the holder? The insert uses a central cylindrical hole and standard square geometry for ISO‑compatible holders; compatibility is determined by the holder’s form, clearance angle, tolerance class, fixing method, size and thickness as described for the insert. Is a chipbreaker integrated in this grade? This insert is supplied without a chipbreaker, so chip control should be managed via cutting parameters, external chip control systems or suitable toolholder geometry. What advantages does the TH10 uncoated grade provide? TH10 offers a sharp, universal carbide edge that lowers cutting forces and improves surface finish in non‑ferrous turning operations, which can reduce secondary finishing and increase process efficiency. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMA 120412 FX105 Wendeplatten - Tungaloy
Combines robust carbide construction, precise 0° clearance geometry and ISO compatibility for consistent turning performance; resulting in longer tool life and stable surface finishes. Order the SNMA 120412 FX105 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMA 120412 FX105 turning insert (ISO) – Tungaloy SNMA 120412 FX105 is a square ISO turning insert engineered for reliable external and internal turning with a secure clamping interface. ISO-standard square insert FX105 wear‑resistant grade 0° clearance angle for stable cutting Cylindrical hole for secure clamping Faster throughput through focused grade and geometry The combination of the FX105 grade and a square insert form prioritises productive cutting cycles and predictable wear behaviour. The chosen grade extends edge stability and helps maintain surface quality over longer tool life, which supports reduced changeover frequency and fewer interrupted cycles. As an ISO-design element, the insert integrates into established tool families, enabling consistent process parameters and simplified inventory management. Secure mounting and precise fit for ISO holders The insert features a cylindrical hole and square form, with a 4.76 mm plate thickness and a 12 mm plate size, offering a mechanically stable clamping interface for ISO external holders or boring bars. The 0° clearance angle and 1.2 mm corner radius create a robust cutting edge for general turning tasks; compatibility is determined by form, clearance, tolerance class, fastening, size and thickness, so the insert seats reliably and repeatably in suitable toolholders. Carbide composition and grade purpose explained Manufactured from cemented carbide, the grade blends wear resistance, toughness and edge stability to suit a broad range of turning operations. The FX105 designation indicates a Tungaloy material selection optimised for balancing abrasion resistance with fracture strength; this makes the insert appropriate where consistent edge life and repeatable results are required. Chipbreaker selection and the specific cutting geometry should be matched to the workpiece, machining strategy and machine-tool stability. Practical handling, replacement and system integration The insert forms part of an ISO insert system that includes a matching external holder or boring bar, a support pad or clamp set and mounting screws. Given the square form with a central cylindrical hole, indexable replacement is straightforward and reduces downtime. Regular inspection of the cutting edge and adherence to recommended feeds and speeds preserve performance and contribute to cost-efficiency through extended service life and predictable maintenance intervals. Contact Metav Werkzeuge to discuss whether the FX105 grade matches the intended turning application; request tailored technical advice or a quotation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806625 SKU: 6806625-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMA120412 Numerical data Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 90° Features Material: cemented carbide Grade: FX105 (Tungaloy) Plate form: square Hole: with cylindrical hole Application: turning System components: ISO insert + matching holder, support pad/clamp set, replacement screws Chipbreaker: none FAQ What turning operations is this insert suited for? The SNMA 120412 FX105 insert is designed for both external and internal turning operations where a square, indexable insert and a FX105 grade are appropriate. How is the insert secured in the toolholder? Clamping is achieved via the central cylindrical hole and matching holder geometry; compatibility depends on form, clearance, tolerance class, fastening, size and thickness. Does the insert include a chipbreaker? This specific insert is supplied without a chipbreaker; chip control should be managed by selecting a suitable holder, cutting parameters or an alternative insert geometry if required. What are the key dimensional details to check before ordering? Confirm the plate size (12 mm), plate thickness (4.76 mm), corner radius (1.2 mm) and included angle (90°) to ensure the insert fits the intended ISO holder. Which material grade is applied and what is its benefit? The Tungaloy FX105 grade is a balanced carbide formulation that combines wear resistance with cutting-edge stability for consistent finishing and extended edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120412 NS520 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO interchangeability and durable cermet cutting grade for consistent production results. Order the SNMA120412 NS520 Tungaloy indexable insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMA 120412 NS520 Tungaloy indexable turning insert for finishing A SNMA120412 NS520 indexable insert designed for finishing and light turning of steel, offering a 1.2 mm nose radius and ISO-compliant geometry for reliable interchangeability. ISO-compliant SNMA geometry NS520 cermet for improved surface finish 1.2 mm nose radius for accurate profiles Square 12 mm size, 4.76 mm thickness Improved surface quality and dimensional control for finishing The NS520 grade is a cermet or coated cermet designed specifically for finish to light machining of steel, emphasising consistent surface finish and dimensional stability. Thanks to the grade’s fine microstructure, uniform wear behaviour is promoted, which reduces part variation and the need for repeated adjustment. The 1.2 mm nose radius supports tight profile control on external and internal diameters while maintaining a balance between edge strength and fine surface generation. In process terms, this translates to fewer reworks and higher first-pass yield for precision components. ISO geometry and clamping reliability for predictable production Built to ISO norms, the square SNMA form ensures straightforward replacement and predictable fit in compatible holders. Compatibility depends on form, clearance, tolerance class, fastening and thickness; the insert’s cylindrical hole and standard dimensions simplify selection of the correct external holder or boring bar. A standardised interface reduces setup time and minimises error when swapping inserts, which helps stabilise cycle times and maintain part-to-part consistency on multi-shift production lines. Cost-effectiveness through process stability and reduced downtime Choosing a stable cutting grade and standardised geometry yields measurable economic benefits: fewer tool changes, longer intervals between indexings and more consistent component quality. The carbide substrate combined with the NS520 surface characteristics lowers the risk of premature chipping during finishing passes and extends usable life per edge. For production environments focused on throughput and quality, this combination supports a favourable cost-per-part metric and enhances overall process reliability. Application guidance and practical selection tips Intended for turning operations, the insert is optimised for finishing and light cuts on steel; a chipbreaker should be selected to match material, cutting mode and machine stability, as this insert is supplied without a chipbreaker. The square 12 mm size and 4.76 mm thickness provide stable seating in the holder and compatibility with a wide range of toolholders. For mixed production involving different workpiece geometries, maintaining consistent holder clamping and using inserts from the same batch and grade helps preserve surface quality across components. Technical queries and specification checks are welcome to ensure the right insert and holder combination is chosen for each application. For reliable finishing performance with the Tungaloy NS520 cermet grade, contact Metav Werkzeuge for tailored application advice and rapid supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6806626 Manufacturer SKU: TUN6806626 Label: SNMA120412 NS520 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / Core technical data Nose radius: 1.2 mm Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Main angle: 90° Designs / Special features ISO indexable turning insert (SNMA) Grade: NS520 (cermet / coated cermet) Plate form: square Mounting: with cylindrical hole Chipbreaker: none Typical application: finishing and light turning of steel FAQ What applications is this insert intended for? The SNMA120412 NS520 indexable insert is intended for finishing and light turning operations on steel, prioritising surface quality and dimensional control. Which holders are compatible with this SNMA insert? Compatibility is determined by insert form, clearance, tolerance class, fastening, size and thickness; the SNMA form with a cylindrical hole requires a holder or boring bar designed for square SNMA inserts. What effect does the 1.2 mm radius have on machining? A 1.2 mm nose radius provides a compromise between profile accuracy and edge strength, promoting good surface finish and consistent dimensions in finishing passes. Is a chipbreaker included with this insert? This product is supplied without a chipbreaker; selection of a suitable chip control geometry should be based on material, cutting mode and machine stability. What material and grade is used for the cutting edge? The insert is produced from carbide (Hartmetall) and furnished in the NS520 cermet or coated cermet grade for enhanced finish and uniform wear behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120412 T505 Wendeplatten - Tungaloy
Take advantage of the insert's CVD-coated carbide and its ISO format for economic, stable turning. Order the SNMA120412 T505 directly via Metav Werkzeuge or consult our specialists for matching holders and insert arrangements. SNMA120412 T505 — ISO square indexable insert for turning, CVD-coated carbide by Tungaloy A SNMA120412 T505 indexable insert designed for general turning, optimised for economical machining of cast iron and compatible with ISO-standard holders CVD-coated carbide for economical cast-iron cutting ISO-format SNMA120412 for broad holder compatibility Square geometry with 90° cutting edge for stability 1.2 mm corner radius for reliable edge strength Increased productivity with proven CVD-coated carbide The combination of a CVD-coated surface and a carbide substrate delivers a wear-resistant cutting edge that supports economical machining of cast iron. The T505 grade is formulated for stable chip formation under interrupted cuts and varying process conditions. By using an ISO-standard insert, shops benefit from predictable fitment and repeatability, which reduces tool-change times and improves overall throughput. This rational focus on material pairing and format leads directly to lower unit costs and more consistent component quality. Robust geometry for stable turning and longer edge life Square geometry with a 90° cutting edge and a 1.2 mm corner radius provides enhanced support at the cutting line, reducing edge chipping and vibration in less rigid set-ups. The specified 0° clearance angle ensures full contact at the primary cutting zone, which suits many conventional external and internal turning operations. These geometric choices translate into longer effective tool life and fewer interruptions for regrinding or insert replacement, supporting continuous production and predictable process windows. Practical system guidance for safe, consistent results This ISO insert is part of a system comprising the indexable plate, a suitable external holder or boring bar, a backing shim and clamping set and replacement screws. Compatibility depends on form, clearance angle, tolerance class, mounting method, size and thickness; selecting a holder that matches the SNMA120412 profile is essential for secure clamping and correct cutting geometry. For materials selection, the grade and chipformer should be matched to cutting speed, stability and the nature of the cut—this insert is specified for cast-iron work where stable chip control and repeatable performance are required. The result is a reliable process step that supports consistent surface finish and dimensional accuracy. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice on integrating the SNMA120412 T505 into existing tool systems and to obtain immediate stock and delivery information Technical data Article number: 6831340 Manufacturer SKU: TUN6831340 SKU: 6831340-Tungaloy Model series: ISO-Drehwendeschneidplatten Data ISO designation: 120412 Corner radius: 1.2 mm Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Lead/approach angle: 90° Special features Grade/coating: T505 (CVD) Substrate: carbide Plate shape: square Hole: with hole, cylindrical hole Chipbreaker: without Application: Turning (external and internal) FAQ Is this insert suitable for turning cast iron? Yes. The SNMA120412 T505 is specified for economical machining of cast iron and combines a CVD-coated grade with a carbide substrate for stable chip formation. What holder type is required for this ISO insert? An ISO-compatible external holder or boring bar matched to the SNMA120412 geometry, clearance angle and thickness is required for secure clamping and correct cutting geometry. Can the SNMA120412 T505 be used for interrupted cuts? The T505 grade is designed to handle varying stability and intermittent cuts; however, holder rigidity and machine stability should be assessed to ensure optimal performance. What does the 1.2 mm corner radius affect in operation? A 1.2 mm corner radius increases edge strength, reduces the risk of chipping and tends to improve surface finish on typical turning operations. Are there chipbreakers available for this insert style? This specific article is listed without a chipbreaker; selection of a suitable chipformer or an alternative grade with an integrated chipbreaker may be required depending on material and cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120412 T5105 Wendeplatten - Tungaloy
Take advantage of robust CVD-coated carbide and a 1.2 mm corner radius for stable, high-speed turning of cast iron; the ISO SNMA120412 geometry ensures compatibility with standard turning holders and secure clamping. Order the insert via Metav Werkzeuge or contact our consultants for application-specific advice. SNMA120412 T5105 indexable insert for turning — square ISO insert, CVD-coated carbide, 90° geometry (Tungaloy) SNMA120412 T5105 is an ISO-designated square indexable insert optimised for external and internal turning of cast iron under stable machining conditions. ISO SNMA 120412 square insert CVD-coated carbide grade T5105 1.2 mm corner radius for reliable edges Cylindrical hole for secure clamping Consistent high-speed performance for cast iron turning The SNMA120412 T5105 insert combines a CVD-coated wear-resistant carbide substrate with a square, 90° geometry, delivering steady cutting performance in high-speed operations. The T5105 grade is formulated for high cutting speeds and provides predictable wear behaviour, which translates into longer tool life and fewer insert changes. For process planners, this means reduced machine downtime and a measurable improvement in productivity when turning grey or nodular cast iron under stable setup conditions. Compatibility and secure clamping for reliable machining Designed to the ISO standard, the insert’s form, relief angle and dimensional tolerances ensure compatibility with widely used turning holders and boring bars. The insert features a cylindrical hole for firm screw clamping and a nominal thickness of 4.76 mm, which supports stable seating and repeatable placement. Because the fitting depends on form, clearance angle and size, selecting the correct holder geometry secures cutting stability and repeatable part accuracy during series production. Why the CVD-coated carbide grade matters A CVD coating on a hardmetal substrate provides a combination of hardness and thermal resistance that is particularly effective when machining abrasive materials like cast iron. The coating reduces flaking and crater wear, improving edge retention in continuous cuts at higher speeds. For engineers new to coatings: CVD (chemical vapour deposition) produces a dense, adherent layer that protects the carbide core while maintaining sharp cutting edges, which helps to preserve surface finish and dimensional stability over longer tool life. Practical benefits for shop-floor efficiency With a 1.2 mm corner radius, the insert balances edge strength and fine surface generation; the radius improves robustness on interrupted cuts without sacrificing finish. The absence of an integrated chipbreaker in this variant places emphasis on matching the insert geometry and grade to the workpiece material and cutting conditions—particularly feed, depth of cut and rigidity of the setup. When combined with a suitable holder, the result is increased process reliability, consistent chip control for stable cutting and fewer unscheduled tool changes, supporting cost-effective series production. For machining applications requiring stable high-speed turning of cast iron, contact Metav Werkzeuge for selection support and order placement; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and availability. Technical data Article number: 6850266 Manufacturer SKU: TUN6850266 Model series: ISO-Drehwendeschneidplatten Material: carbide Numbers / Core technical data ISO designation: SNMA120412 Insert size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 90° Designs / Special features Coating: T5105 (CVD-coated) Suitable for: cast iron (high-speed applications) Insert shape: square Hole: with cylindrical hole Chipbreaker: none Typical use: external and internal turning FAQ What materials is this insert intended for? The SNMA120412 T5105 insert is intended primarily for high-speed turning of cast iron; the T5105 CVD-coated carbide grade offers wear resistance suited to these applications. How does the 1.2 mm corner radius affect cutting? A 1.2 mm corner radius increases edge strength and tolerance to interruptions while maintaining a good surface finish; it is particularly useful where a compromise between robustness and fine finish is required. Is this insert compatible with standard ISO holders? Yes; the SNMA120412 conforms to ISO dimensions, and compatibility depends on matching the holder’s form, relief angle, tolerance class, screw fixing and insert size. Does this variant include a chipbreaker? This specific item does not include a chipbreaker; chip control must be achieved through process parameters and holder selection appropriate for the workpiece and cutting conditions. What is the benefit of the T5105 coating? The T5105 CVD coating enhances thermal resistance and edge stability during high-speed cuts, reducing wear and extending service life in demanding cast iron operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120412 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance and ISO compatibility for reliable cast iron turning; the insert offers a balanced mix of wear resistance and cutting-edge stability. Order genuine Tungaloy inserts through Metav Werkzeuge or ask their consultants for specification support. SNMA 120412 T5115 indexable turning insert by Tungaloy — CVD-coated carbide, for cast iron turning SNMA 120412 T5115 is an ISO-specification indexable insert designed for external and internal turning in cast iron, combining a universal grade with robust edge stability for consistent production performance. SNMA120412 insert, ISO standard CVD-coated carbide universal grade T5115 For cast iron machining with stable edge 90° square form with 1.2 mm corner radius Consistent fit and process reliability through ISO conformity The SNMA120412 complies with ISO geometry and dimensional tolerances so compatibility with a matching holder is predictable and repeatable. The insert’s specification means that fit is determined by form, clearance angle, tolerance class, fastening method, size and thickness; this reduces setup time and lowers the risk of incorrect tooling combinations. The result is a more stable cutting process and fewer interruptions to production, which supports higher machine utilisation and predictable cycle times. Balanced wear resistance for cast iron applications The T5115 grade is a universal CVD-coated carbide developed to provide an even compromise between wear resistance and edge stability when machining cast iron. This balance enables longer tool life on intermittent cuts and helps maintain surface finish on through-feed operations. Where operators require fewer indexings and reliable repeatability, the grade’s combination of coating technology and carbide substrate raises process efficiency and reduces tooling consumption per part. Robust geometry for accurate, repeatable cutting A square, 90° insert form with a 1.2 mm corner radius and a thickness of 4.76 mm increases rigidity at the cutting edge and allows stable engagement in both facing and plunge-turning operations. The square form provides four usable corners for economical indexing, while the cylindrical hole supports secure clamping and quick replacement. These design choices minimise vibration, support consistent chip formation, and improve dimensional control on the workpiece. Seamless integration into existing turning tool systems This ISO indexable insert is intended to function as part of a complete tooling system — an ISO insert plus a suitable external holder or boring bar, a shim/clamping set and the correct replacement screws. Selecting the appropriate holder that matches form, clearance, tolerance and fastening keeps the cutting edge effective and the process safe. For customers seeking guidance on holder selection or process parameters, technical consultation is available to help align the tool choice with material, machine stability and cycle requirements. For specification advice or to source genuine Tungaloy T5115 inserts, contact Metav Werkzeuge for tailored support and timely supply — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6850267 Manufacturer SKU: TUN6850267 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Designation: SNMA120412 Facts Corner radius: 1.2 mm Thickness: 4.76 mm Insert size: 12 mm Clearance angle: 0° Included angle: 90° Special features CVD-coated carbide grade T5115 Universal grade optimised for cast iron Square form, 90° geometry Cylindrical hole for secure clamping No chipbreaker (plain top) Suitable for external and internal turning Part of an ISO insert/holder/clamping system FAQ Which materials is this insert suitable for? The SNMA 120412 T5115 indexable insert by Tungaloy is primarily designed for cast iron machining and delivers a balanced combination of wear resistance and edge stability for this material. What is the corner radius of the insert? The insert features a 1.2 mm corner radius, giving a compromise between edge strength and the ability to generate the required profile on turned surfaces. Does this insert include a chipbreaker? No, this particular insert is supplied without a chipbreaker; chip control should be managed through toolpath, cutting data and holder geometry. How is compatibility with holders ensured? Compatibility is achieved by matching the ISO form, clearance angle, tolerance class, fastening method, insert size and thickness; these parameters determine whether a holder and insert form a valid assembly. How is the insert secured to the holder? The square insert has a cylindrical hole to accept the correct clamping screw and seating elements; use the manufacturer-recommended clamping set and spare screws for secure fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120412 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade and ISO compatibility for reliable turning in less stable conditions; the insert’s square form and 1.2 mm corner radius deliver consistent edge life and predictable results. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. SNMA120412 T5125 – Turning insert (ISO SNMA 120412) by Tungaloy The SNMA120412 T5125 is a square ISO turning insert for external and internal turning, designed as a tougher CVD-coated carbide grade for cast iron applications and interrupted cuts. CVD-coated carbide grade T5125 Optimised for cast iron in interrupted cuts Square ISO SNMA 120412 with 1.2 mm radius Cylindrical hole; 0° clearance; 4.76 mm thickness Robust cutting performance for interrupted turning The insert is furnished in a CVD coating on a carbide substrate, a combination that enhances wear resistance while retaining toughness under variable cutting conditions. This material pairing makes the insert especially suitable for machining cast iron where interrupted cuts or less stable setups would otherwise accelerate flank wear. The absence of an integrated chipbreaker means the insert performs best when paired with a matching toolholder or chipformer chosen for the workpiece and cutting strategy, providing controlled flank wear and extended edge life without compromising cutting security. Secure mounting and ISO-based compatibility for predictable set-up Manufactured to the ISO SNMA 120412 specification, compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness. The square form and 1.2 mm corner radius offer a compromise between edge strength and surface finish, while the cylindrical hole ensures stable clamping with standard clamps or screws. The insert has a 0° clearance value, which requires an appropriate holder geometry to create the necessary relief; when assembled correctly, the system yields stable cutting forces and improved reproducibility across batches. Practical application advice to boost productivity Designed for both external and internal turning, this indexable insert supports efficient tool changeover and predictable tool life, reducing machine downtime and per-part costs. The indexable design permits reorienting the cutting edges to exploit remaining life, and the T5125 grade is formulated as a tougher option for rougher or interrupted conditions in cast iron. Since no chipbreaker is included, select the holder and cutting data to match the chip formation demands of the operation. Overall, the insert contributes to steady production runs and a lower total cost of ownership through consistent performance and straightforward replacement. For machining cast iron under interrupted conditions, request the Tungaloy SNMA120412 T5125 insert from Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and prompt supply Technical Data Article number: 6850268 Manufacturer SKU: TUN6850268 Manufacturer article number: 6850268 Model series: ISO turning inserts Material: carbide Grade/coating: T5125 (CVD-coated) Numbers / Core technical data Corner radius: 1.2 mm Thickness: 4.76 mm Size: 12 mm Clearance angle: 0° Included angle: 90° Special features Square form Cylindrical hole No chipbreaker CVD-coated carbide grade T5125 Suited for cast iron in interrupted cuts ISO designation: SNMA120412 FAQ What materials is this insert intended for? The insert is formulated in the T5125 CVD-coated carbide grade and is particularly suited for cast iron machining, especially under interrupted cutting conditions. Is the SNMA120412 compatible with standard ISO toolholders? Yes; the ISO SNMA 120412 designation indicates standard compatibility, though holder choice must match form, clearance angle and thickness for secure clamping. Why is there no chipbreaker on this insert? This insert is supplied without a chipbreaker, allowing the selection of holder geometry or separate chip control measures tailored to the machining task. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength for interrupted cuts while delivering an acceptable surface finish, balancing robustness and form accuracy. Which SKU identifies this product for ordering? The product is listed under Manufacturer SKU TUN6850268 and article number 6850268 for straightforward ordering and inventory control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120412 T515 Wendeplatten - Tungaloy
Benefit from the combination of CVD‑coated carbide T515, a 1.2 mm corner radius and the ISO SNMA120412 format for economical, predictable cast‑iron turning; order the insert directly via Metav Werkzeuge or consult their specialists for application support. SNMA 120412 T515 indexable insert for turning by Tungaloy A SNMA120412 T515 ISO‑format indexable turning insert optimised for economical machining of cast iron with a 1.2 mm corner radius and a 90° approach angle. CVD-coated carbide T515 grade ISO SNMA120412 square geometry 1.2 mm corner radius for fine finishing Suitable for cast iron turning Higher throughput with predictable tool life The combination of a CVD‑coated carbide substrate and grade T515 delivers a reliable balance between wear resistance and economy when machining cast iron. The CVD coating forms a hard, chemically stable outer layer that reduces abrasive wear and helps maintain cutting edge integrity at elevated cutting speeds; this yields longer intervals between indexings and fewer unplanned stoppages. As a result, shop floors see improved cycle times and a reduced cost per component without compromising surface quality. Secure clamping and straightforward holder matching The ISO SNMA120412 geometry, square form and the central cylindrical hole ensure consistent seating and clamping in compatible external holders or boring bars. With a plate thickness of 4.76 mm and a clear designation, setup becomes repeatable and tolerant to small positional deviations, reducing changeover time. Clear ISO compatibility aids quick tool changeovers and predictable machining behaviour in serial production. Edge technology for stable chip formation The toolgrade and coating combination gives enhanced edge stability during continuous turning. The 1.2 mm corner radius provides a robust cutting edge suitable for fine finishing passes, lowering the risk of edge chipping under moderate interruptions. Selecting an appropriate chipformer or chipbreaker remains important for efficient evacuation; the grade is optimised for broad cast‑iron coverage but the absence of an integrated chipbreaker in this variant means chip control should be considered at the holder level. Practical advantages for workshop operation Using an ISO‑format indexable insert supports fast indexing and straightforward inventory management: identical inserts fit a range of holders conforming to the SNMA form, simplifying stocking and supply logistics. The 90° approach angle offers neutral cutting force direction for many turning operations, aiding dimensional stability. If uncertainty exists about holder compatibility or process parameters, Metav Werkzeuge can advise on the best combination of holder, clamping set and cutting data to match production priorities. Contact Metav Werkzeuge for tailored advice on Tungaloy CVD‑coated T515 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6733833 Manufacturer SKU: TUN6733833 SKU: 6733833-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMA120412 Facts Thickness: 4.76 mm Insert size: 12 mm Corner radius: 1.2 mm Approach angle: 90° Rake angle: 0° Special features Material: carbide Grade: T515 (CVD-coated) Shape: square Hole: cylindrical hole Chipbreaker: none Application: turning FAQ Which materials suit this insert best? The SNMA120412 T515 insert is primarily designed for economical machining of cast iron; the T515 grade and CVD coating provide good wear resistance for grey and nodular cast irons while preserving surface finish. How is the insert secured in the holder? The ISO SNMA120412 geometry and central cylindrical hole enable reliable clamping in compatible external holders or boring bars, with the 4.76 mm thickness ensuring stable seating. What cutting edge preparation and angle are provided? The insert features a 1.2 mm corner radius and a 90° approach angle, offering a robust edge for finishing passes and neutral cutting forces for many turning tasks. Is the SNMA120412 suitable for interrupted cuts? The T515 grade is geared toward economical cast‑iron turning; for heavily interrupted cuts, overall system rigidity and holder choice should be evaluated to ensure edge life and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMA 120412 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of an uncoated carbide TH10 grade, ISO compatibility and a secure cylindrical‑hole clamping for predictable turning results; order via Metav Werkzeuge or consult their specialists for holder matching and application advice. SNMA 120412 TH10 — SNMA ISO 120412 indexable turning insert for external and internal turning, Tungaloy The SNMA120412 TH10 is a square ISO‑standard indexable turning insert designed for external and internal turning, offering a 90° form angle and a 1.2 mm nose radius for controlled finishing. ISO-standard square insert (90° form angle) Uncoated carbide grade TH10 for low cutting forces 1.2 mm nose radius for controlled finish Cylindrical hole for secure clamping Consistent machining performance for ISO‑compliant turning The insert is manufactured to the ISO designation 120412, which ensures predictable geometry and fit when paired with matching holders. Compatibility is influenced by the insert form, 0° free (rake) angle, tolerance class, fastening method, nominal size and thickness; these parameters reduce setup time and risk of misfits. For production runs this translates into repeatable cutting behaviour and lower scrap rates, as the standardised geometry supports toolpath planning and holder interchangeability. The ISO conformity also simplifies inventory management across different machines. Efficient cutting and improved surface quality with TH10 The uncoated carbide TH10 grade is a sharp, universal specification optimised for non‑ferrous materials and applications where a bare cutting edge helps maintain low cutting forces and a clean surface finish. An uncoated edge minimises thermal insulation at the cutting zone, which can be advantageous for materials sensitive to built‑up edge. Where low machining forces and good part appearance are priorities, this grade often outperforms more highly coated variants. Note that the insert is supplied without a chipbreaker, so choosing a suitable chip control geometry for the workpiece and machining stability is essential. Robust clamping and practical system configuration The square SNMA form with a 90° form angle and a 1.2 mm nose radius offers versatility for both roughing and finishing passes when the process parameters are matched to machine and setup stiffness. The plate thickness of 4.76 mm and the cylindrical hole support secure clamping; a correct shim and clamp set with the appropriate screws completes the system. System assembly normally comprises the ISO indexable insert, a compatible external holder or boring bar, an underlay/shim or clamping set and replacement screws. Selecting the right grade, chipbreaker geometry and holder stability remains decisive for surface integrity and tool life. For technical guidance or to secure the Tungaloy SNMA120412 TH10 insert tailored to a specific holder or application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — their specialists provide advice on compatibility and process optimisation. Technical data Article number: 6806630 Manufacturer SKU: TUN6806630 SKU: 6806630-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMA120412 TH10 Facts Size: 12 mm Thickness: 4.76 mm Nose radius: 1.2 mm Form angle: 90° Free (rake) angle: 0° Hole: cylindrical Special features Uncoated carbide (Hartmetall) Grade: TH10 (sharp universal) For external and internal turning No chipbreaker ISO‑standard plate; compatibility by form, free angle, tolerance, fastening, size and thickness System: insert, holder, underlay/clamp set, replacement screws FAQ Which materials is this insert best suited for? The SNMA120412 TH10 insert is specified for non‑ferrous materials and similar applications where an uncoated carbide edge supports low cutting forces and clean surfaces. Is the TH10 grade coated or uncoated? TH10 is an uncoated carbide grade; the bare cutting edge is chosen to reduce cutting forces and assist in achieving good surface finish for appropriate materials. What holder compatibility should be checked before ordering? Compatibility requires matching the insert form, 0° free angle, tolerance class, fastening method, size and thickness to the holder; Metav Werkzeuge can advise on the correct external holder or boring bar. Does the insert include a chipbreaker? This configuration is supplied without a chipbreaker; chip control must be addressed via process parameters or a different insert geometry if required. How does the 1.2 mm nose radius affect finish and tool life? A 1.2 mm nose radius balances improved surface finish with acceptable cutting forces; larger radii can enhance tool life at the expense of higher radial cutting load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com