SNMG 120402 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the 0.2 mm corner radius for consistent, high‑quality surface finishes in turning operations; the ISO‑standard form and 4.76 mm thickness ensure reliable compatibility with standard holders. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. SNMG 120402 NS9530 turning insert – uncoated cermet, 0.2 mm radius (Tungaloy) A SNMG120402 NS9530 indexable turning insert for finishing operations on steel, designed for continuous cuts and fine surface quality. Finishing-grade uncoated cermet Sharp cutting edge for fine surface finish 0.2 mm corner radius for precision Double-sided chipbreaker, square form Precision finishing and how the grade makes the difference The combination of an uncoated cermet cutting material and a sharp cutting edge delivers low cutting forces and superior surface quality on steel. Cermet grades like NS9530 are optimised for finishing: they maintain edge stability during continuous cuts and reduce built-up edge formation, which converts directly into fewer rework cycles and improved part aesthetics. For shops aiming to raise component finish without sacrificing cycle stability, this indexable insert provides a predictable, repeatable result. Compatibility with ISO holders and why dimensions matter Designed to the ISO standard SNMG120402 form, the insert’s geometry and a 4.76 mm thickness permit straightforward pairing with compatible external holders and boring bars. The square plate format and the cylindrical hole require the correct backing pad and clamp set to achieve repeatable clamping accuracy. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters reduces chatter and optimises tool life in production environments. Practical benefits on the shop floor A 0.2 mm corner radius balances edge strength with the ability to produce tight radii and fine profiles; it suits low‑depth finishing passes and delicate operations where surface quality is critical. The double‑sided chipbreaker aids chip control in continuous turning, reducing the risk of entanglement and improving swarf evacuation. Together, these features support higher process stability and fewer stoppages in repetitive production work. System setup and recommended use cases Implementing this insert within a complete system — insert, suitable external holder or boring bar, backing pad/clamp set and replacement screws — ensures consistent performance. The geometry supports both external and internal turning when mounted on appropriate tooling; selecting the chipbreaker and grade to match the workpiece material and machining stability is essential for optimal results. The 90° cutting angle and 0° clearance provide a neutral geometry for common finishing tasks, while the robust substrate supports repeatable performance under steady cutting conditions. For application guidance with the Tungaloy NS9530 finishing grade and to arrange supply via Metav Werkzeuge, contact Metav Werkzeuge for tailored advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6950984 SKU: 6950984-Tungaloy Manufacturer SKU: TUN6950984 Item designation: SNMG120402 NS9530 Tungaloy turning insert Core data Thickness: 4.76 mm Inscribed size: 12 mm Corner radius: 0.2 mm Relief/clearance angle: 0° Cutting angle: 90° Features Cutting material: uncoated cermet (NS9530) Substrate: cemented carbide Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal), finishing Model series: ISO turning indexable inserts System: insert + holder + backing pad/clamp + screws FAQ What materials is this grade suited for? The NS9530 finishing grade is formulated for steel machining; the SNMG120402 NS9530 Tungaloy insert offers low cutting forces and a sharp edge designed to produce high surface quality on steel workpieces. Can the insert be used for both external and internal turning? Yes, the SNMG120402 geometry is suitable for both external and internal turning when paired with the appropriate ISO‑compatible holders and boring bars. How does the 0.2 mm corner radius affect machining? A 0.2 mm radius provides a compromise between strength and edge definition, enabling fine finishing passes and accurate profile generation while maintaining adequate edge life. Is a coated grade preferable for interrupted cuts? For interrupted cutting, a more wear‑resistant or coated grade may be preferable; the uncoated NS9530 excels in continuous finishing cuts but may not offer the same robustness under heavy interruptions. Which components complete the tooling system for reliable clamping? A matching external holder or boring bar, a backing pad or clamp set and the correct replacement screws complete the system; compatibility depends on insert form, thickness and fastening style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 NS9530 Wendeplatten - Tungaloy
Combine uncoated cermet cutting performance with a sharp cutting edge and low cutting forces to achieve consistent finishing results; order genuine inserts via Metav Werkzeuge or consult our team for application-specific recommendations. SNMG120402 NS9530 ISO turning insert — uncoated cermet, 90° square by Tungaloy A SNMG120402 NS9530 ISO-standard turning insert designed for precision finishing of steel components with a sharp cutting edge and stable chip control Precision finishing for steel Uncoated cermet for superior surface finish ISO‑standard SNMG 120402 geometry Double‑sided chipbreaker for stability Cylindrical hole for secure clamping Consistent finishing with low cutting forces The grade is an uncoated cermet developed for finishing passes on steel where low cutting forces and excellent surface quality are required. Cermet combines ceramic and metallic phases to provide a hard, wear-resistant cutting edge that maintains sharpness during continuous cuts. For turning operations where small depths of cut and fine feeds are common, this insert minimises edge deformation, reduces vibration and helps achieve repeatable micro‑roughness values. The result is improved process stability and less downstream polishing or reworking. ISO geometry for secure clamping and repeatable set‑ups The SNMG form follows ISO‑standard geometry for a square, 90° insert, giving a robust seating and straightforward indexability. The cylindrical hole and specified tolerances ensure secure fastening in compatible holders; compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. With a 4.76 mm plate thickness and 12 mm inscribed size, the insert fits common external holders and boring bars, enabling rapid index changes and consistent tool offsets for productive shopfloor workflows. Improved chip control and surface integrity for continuous passes A double‑sided chipbreaker tailored to finishing promotes stable chip formation during uninterrupted cuts, which is particularly advantageous when producing long turned lengths or high-volume batches. The selected grade, optimised for fine feeds, supports a 0.2 mm corner radius that balances edge strength with the ability to produce tight dimensional tolerances and high-quality finishes. This combination reduces built-up edge tendencies and helps maintain cycle times by lowering the need for secondary operations. Practical system considerations and shop benefits Use this insert as part of a standard ISO insert system comprising the insert itself, a matching external or boring holder, a shim/clamp set and the correct fastening screw. Selecting the appropriate chipbreaker and grade according to the workpiece material and cutting conditions ensures favourable tool life and consistent results. For CNC turning shops focused on finishing operations, this solution contributes to predictable set‑up times, reduced scrap and a better rate of first‑pass acceptance, supporting both efficiency and quality objectives. For direct ordering or application advice on Tungaloy finishing inserts such as the SNMG120402 NS9530, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and genuine spare parts Technical data Article number: 6951007 Manufacturer SKU: TUN6951007 Insert designation: SNMG120402 Grade: NS9530 Material: Hartmetall / uncoated cermet Facts Corner radius: 0.2 mm Clearance angle: 0° Insert thickness: 4.76 mm Inscribed circle: 12 mm Geometry angle: 90° Special features Square insert, indexable on four corners Cylindrical hole for secure clamping Double‑sided chipbreaker, finishing style Optimised for turning of steel (finishing) Compatible with ISO‑standard turning holders FAQ What materials is this insert suited for? The SNMG120402 NS9530 is formulated as a finishing grade for steel; the uncoated cermet composition provides a sharp edge and low cutting forces for continuous finishing passes. Can the insert be used on standard ISO holders? Yes. The SNMG120402 follows ISO geometry and fits holders that accept SNMG inserts with matching form, size and fastening method. How does the chipbreaker affect performance? The double‑sided chipbreaker is designed for stable chip formation during finishing, reducing vibration and improving surface quality for prolonged runs. What corner radius and thickness should be expected? This insert has a 0.2 mm corner radius and a thickness of 4.76 mm, balancing edge strength with the ability to achieve fine surface finishes. Is this an original Tungaloy product and how to order genuine parts? This is an original Tungaloy indexable insert (SKU: TUN6951007). For genuine replacements and application advice, Metav Werkzeuge can provide guidance and supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility for reliable production results; order originals via Metav Werkzeuge or consult our specialists for application advice. SNMG120402 NS9530 — SNMG indexable turning insert for turning, Tungaloy SNMG120402 NS9530 is an ISO-form indexable insert engineered for finishing steel components, offering a sharp cutting edge and stable surface results. Precision finishing for steel parts Sharp cutting edge, low cutting forces Double-sided insert for longer tool life ISO 120402 form with cylindrical hole Superior surface quality and reduced cutting forces The uncoated cermet grade NS9530 is developed as a finishing grade for steel, delivering a sharp cutting edge that lowers cutting forces and improves surface integrity. For continuous cuts and small depths of cut, the material combination provides consistent chip formation and minimised vibration, translating into a measurable improvement in final part quality. The insert’s geometry and edge preparation are optimised to produce fine surface finishes while keeping thermal and mechanical loading on the tool low, which benefits cycle-time consistency in serial turning operations. Reliable fit and system compatibility for fast changeovers Designed to ISO dimensions, the insert ensures predictable compatibility with holders and boring bars when form, clearance angle, tolerance class, fastening method, size and thickness are matched. The square plate format with a cylindrical locating hole enables stable seating and straightforward indexing. As a double-sided insert with a corner radius of 0.2 mm and a plate thickness of 4.76 mm, it offers repeatable clamping and simple replacement, reducing machine downtime and simplifying tool inventory management across multiple machines and setups. Economic operation through indexability and consistent chip control The insert’s double-sided design effectively doubles usable cutting edges, contributing to lower cost per edge and longer intervals between tool changes. The integrated double-sided chipbreaker supports steady chip evacuation during finishing passes, which aids process stability and reduces the need for rework. Where production demands constant tolerances and repeatable surface quality, this solution supports efficient throughput while maintaining high-quality finishes, making it well suited for precision component manufacturers working with steel. Practical handling and application notes for machinists The ISO mounting and standardised form mean that the insert is usable in common turning toolholders and on many boring bars, provided the holder matches the insert’s dimensions and tolerance class. The 0° clearance angle and 90° orientation are suitable for typical external and internal turning operations focused on fine finishing. For system assembly, include a matching external holder or boring bar, an underlay/clamp set and spare fastening screws; these items complete a reliable tooling system and help ensure consistent seating and performance on the machine. For original Tungaloy SNMG120402 NS9530 inserts and expert application guidance, contact Metav Werkzeuge — our advisors are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to help specify the correct holder and chipbreaker combination for each job. Technical data Article number: 6966185 SKU (merchant): 6966185-Tungaloy Manufacturer SKU: TUN6966185 ISO designation: SNMG120402 Grade: NS9530 Core measurements Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Plate form: square Features & compatibility Uncoated cermet grade NS9530 Double-sided chipbreaker With cylindrical locating hole ISO turning insert series Intended application: turning System components: holder/boring bar, underlay/clamp set, spare screws FAQ What machining tasks is this insert best suited for? The SNMG120402 NS9530 insert is intended primarily for finishing operations in steel, where a sharp edge and low cutting forces are required to achieve high surface quality. Is the insert reversible and how does that affect cost-efficiency? The insert is double-sided, allowing indexing of multiple cutting edges; this increases usable life per insert and reduces cost per edge for production runs. Which toolholders are compatible with the ISO SNMG120402 form? Compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness; the SNMG120402 form matches standard ISO square insert toolholders and appropriate boring bars. Can this insert handle interrupted cuts or only continuous finishing passes? The NS9530 grade is optimised for continuous finishing and small depths of cut; for heavy interrupted cuts a different grade or geometry should be considered. What are the locating and clamping features of the insert? The insert has a cylindrical locating hole and is secured using standard clamp and screw systems; stable seating ensures repeatable performance and simple replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide hardness, reliable chip control and ISO compatibility for uninterrupted production. Order the insert directly via Metav Werkzeuge or request further advice from our specialists for an optimised turning process. SNMG 120402 T6215 Turning insert by Tungaloy The SNMG120402 T6215 is an ISO-standard square turning insert designed for stable to lightly interrupted turning of stainless steels and similar alloys. CVD-coated carbide grade T6215 For turning stainless steels under stable cuts Square 90° insert with 0.2 mm corner radius Double-sided chipbreaker; with cylindrical hole Increase process stability with wear-resistant coating The CVD-coated carbide grade T6215 provides consistent wear resistance during prolonged operation, which directly improves tool life and reduces downtime. The coating is designed to withstand the abrasion typical when machining stainless steels, so fewer indexings are required and batch runs remain predictable. This benefit translates into lower tool consumption and more stable component tolerances over extended production cycles. Quick integration into ISO tool systems for efficient changeovers The insert conforms to ISO geometry specifications, so compatibility is determined by form, clearance angle, tolerance class, attachment method, size and thickness. With a square 90° geometry and a plate thickness of 4.76 mm, the component seats reliably in matching holders, enabling fast tool changes and minimal setup time. Clear identification of the ISO code and size simplifies procurement and stock management for precision turning operations. Improved surface finish and chip management for consistent parts A double-sided chipbreaker combined with a 0.2 mm corner radius supports controlled chip formation and stable cutting forces, which helps maintain surface quality while limiting chatter in stable conditions. For operations where finish and repeatability matter, this geometry reduces secondary finishing and shortens overall cycle times. The cylindrical mounting hole ensures secure clamping and uniform seat pressure for repeatable cutting results. Practical application guidance for turning stainless steels Intended for turning applications, the insert is suitable for both external and internal turning when matched with an appropriate holder and clamping set. The 0° clearance angle influences cutting edge engagement; operators should select cutting parameters and coolant strategies that suit the grade and workpiece stability. Choosing the right chipbreaker and cutting data will maximise productivity and surface integrity in series production. For reliable machining of stainless steels choose Tungaloy’s CVD-coated T6215 inserts and contact Metav Werkzeuge for availability, technical consultation and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6950993 Facts ISO designation: SNMG120402 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included hole: with cylindrical hole Special features Material: carbide (cemented carbide) Coating: CVD-coated Grade: T6215 Geometry: square plate, 90° Chipbreaker: double-sided Application: turning Manufacturer SKU: TUN6950993 FAQ Which materials is this insert best suited for? The SNMG120402 T6215 insert by Tungaloy is optimised for machining stainless steels under stable to lightly interrupted cutting conditions. What are the key geometric specifications of the insert? The insert features an ISO SNMG120402 form, a 12 mm plate size, 4.76 mm thickness, a 0.2 mm corner radius and a 90° square geometry. Does the insert have a coating for wear resistance? Yes, the T6215 grade is CVD-coated carbide, offering enhanced wear resistance and consistent performance in turning operations. Is the insert compatible with standard ISO holders? Compatibility requires a matching holder that corresponds to the insert form, clearance angle, tolerance class, attachment and plate thickness; the SNMG120402 designation supports straightforward matching to ISO-standard holders. How should chip control be managed with this insert? The double-sided chipbreaker is designed to produce controlled chips in stable cutting; selecting the appropriate chipbreaker orientation and cutting data will ensure efficient chip evacuation and improved surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 T6215 Wendeplatten - Tungaloy
Take advantage of wear-resistant CVD-coated carbide and an ISO-compliant geometry for reliable turning of rostfreier Stahl. The combination of a double-sided chipbreaker, 90° square form and precise dimensions ensures stable cutting under steady to lightly interrupted conditions; order via Metav Werkzeuge or request consultation for cutting data. SNMG 120402 T6215 SNMG120402 — Indexable turning insert for Turning, Tungaloy SNMG120402 T6215 is a square ISO indexable insert designed for turning applications, optimised for rostfreier Stahl under stable to slightly interrupted cutting conditions CVD-coated carbide for rostfreier Stahl ISO-compliant SNMG120402 geometry Double-sided chipbreaker for stability Square insert with 90° cutting edge Consistent cutting performance for rostfreier Stahl The insert’s CVD coating and carbide substrate form a wear-resistant system that keeps edge integrity under demanding conditions. For machining rostfreier Stahl, the T6215 grade balances toughness and abrasion resistance to reduce flank wear and thermal softening. The 90° square form provides predictable chip flow and stable cutting forces; this leads to reproducible component quality and longer indexable life. Operators gain measurable process stability, not just nominal tool life. Secure fit and predictable geometry for reliable clamping Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening and plate thickness. The ISO designation ensures interchangeability: the SNMG120402 format, cylindrical hole and standard tolerance allow secure clamping in most external holders and toolholders. The 0.2 mm corner radius and 4.76 mm plate thickness contribute to a robust cutting edge and consistent seating, reducing the risk of insert movement during interrupted cuts and improving repeatability in serial production. Coating and grade advantages that extend productive time A CVD-coated hardmetal grade like T6215 combines a hard surface layer with a tough substrate to resist abrasion while withstanding chatter and edge chipping. The double-sided chipbreaker design promotes controlled chip formation across a range of feeds and depths, simplifying process setup and reducing manual intervention. This results in fewer index changes and a higher share of productive machining time — a clear cost-efficiency argument for batch and continuous turning operations. Application guidance and selection criteria When using this insert for turning, select the chipbreaker and grade according to workpiece material, machining type and machine stability. For stable to lightly interrupted turning of rostfreier Stahl, the combination of the SNMG geometry and T6215 grade suits external and internal turning operations. Ensure the holder matches the insert’s form, 0° clearance angle, hole style and thickness to maintain clamping integrity. For borderline conditions, a toolholder with additional support or different insert seating may further improve process security. Contact Metav Werkzeuge for tailored cutting data and advice on applying the Tungaloy SNMG120402 T6215 indexable insert in turning operations Technical Data Article number: 6950979 SKU: 6950979-Tungaloy Manufacturer item number: TUN6950979 Model series: ISO turning indexable inserts Material: Carbide Facts ISO designation: 120402 Size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Shape angle: 90° Clearance angle: 0° Special features Grade: T6215 Coating: CVD-coated Chipbreaker: Double-sided Plate form: Square Hole: With cylindrical hole Typical application: Turning of rostfreier Stahl under stable to slightly interrupted conditions FAQ What materials is this insert suitable for? The SNMG120402 T6215 insert is optimised for machining rostfreier Stahl; the T6215 grade and CVD coating provide wear resistance for such applications. How does the chipbreaker affect machining? The double-sided chipbreaker on this Tungaloy indexable insert promotes controlled chip formation, improving process stability and reducing the need for manual chip management. Which holder characteristics must match the insert? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; the SNMG120402 geometry and cylindrical hole support standard clamping in ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 T6215 Wendeplatten - Tungaloy
Combining CVD-coated carbide wear resistance with a precise 0.2 mm corner radius and ISO SNMG geometry, this insert delivers consistent, high-quality results for turning stainless steel. Order the SNMG 120402 T6215 insert directly via Metav Werkzeuge or contact our consultants for holder compatibility and process advice. SNMG 120402 T6215 ISO Turning Insert by Tungaloy — CVD-coated carbide, 0.2 mm radius SNMG 120402 T6215 is a square, double-sided turning insert designed for external and internal turning, optimised for stainless steel in stable to lightly interrupted cutting conditions CVD-coated carbide for enhanced wear resistance Suitable for stainless steel turning applications 0.2 mm corner radius for refined surface finishes ISO SNMG form with cylindrical hole for secure clamping Extended tool life through CVD-coated carbide for steady production The CVD-coated carbide grade offers improved resistance to abrasive and adhesive wear, which translates into longer tool life and fewer index changes. In practice this means fewer interruptions for tool exchange and a steadier production flow when machining stainless steel. The coating also helps maintain a stable cutting edge at raised temperatures; in combination with the insert geometry, this reduces flank wear and helps preserve part tolerances over longer runs. Precision geometry and system compatibility to avoid setup issues The insert follows the ISO SNMG standard and is supplied as a square insert, size 12 with a thickness of 4.76 mm, a 0.2 mm corner radius and a 0° clearance geometry. Compatibility with a toolholder is defined by form, clearance angle, tolerance class, fastening, size and thickness; matching these parameters ensures correct seat and clamping. The SNMG120402 design includes a cylindrical hole for secure fixation and is intended to be used with a suitable external holder or boring bar together with the required shim/clamp set and replacement screws. Application-focused design for stainless steel with reliable chip control The double-sided chipbreaker and the T6215 grade are selected for productive machining of stainless steel under stable to slightly interrupted conditions. The modest corner radius supports a balance between strength and surface quality: feeds that suit the 0.2 mm radius will promote consistent finish while limiting edge chipping. For interrupted cuts or less rigid setups, selecting a chipbreaker and cutting data aligned with stability and material behaviour improves process reliability and reduces the likelihood of unexpected tool failure. Practical benefits: productivity, repeatability and simple integration Using an ISO-conform insert reduces setup complexity and simplifies stocking of replacements across multiple machines. The combination of a robust carbide substrate, CVD coating and standard SNMG geometry supports reproducible component quality and predictable tool consumption. Integration into an existing turning system is straightforward when the holder and clamping components are verified; the result is enhanced uptime, consistent surface finishes and lower overall machining costs through reduced tool changes. For machining stainless steel with Tungaloy quality, contact Metav Werkzeuge for application guidance and holder compatibility at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966182 Manufacturer SKU: TUN6966182 SKU: 6966182-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Insert designation: SNMG120402 Grade: T6215 Material: Carbide Coating: CVD Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Angle: 90° Hole: with cylindrical hole Special features Square insert, double-sided chipbreaker ISO SNMG standard geometry Intended application: Turning (external and internal) Suited for stainless steel under stable to light interruptions System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ Which materials is this insert best suited for? The SNMG120402 T6215 insert is optimised for machining stainless steel and performs best under stable to slightly interrupted cutting conditions. How can compatibility with a toolholder be ensured? Compatibility requires matching form, clearance angle, tolerance class, fastening, size and thickness; check that the holder accepts ISO SNMG inserts and accommodates a 12 mm square, 4.76 mm thick insert with a cylindrical hole. Does the insert provide good chip control for turning operations? Yes, the double-sided chipbreaker integrated in the insert design supports effective chip formation and evacuation when paired with appropriate feeds and speeds. What surface quality can be expected with the 0.2 mm corner radius? A 0.2 mm corner radius offers a balance between edge strength and finish quality; when combined with correct cutting parameters the result is refined surface finishes and consistent part quality. Is the insert indexable and suitable for multiple index positions? The SNMG120402 is double-sided and indexable, allowing rotation to fresh cutting edges as wear occurs; this extends usable life per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215, a double-sided chipbreaker and ISO-compatible SNMG geometry for productive, repeatable medium-steel turning; order the insert directly via Metav Werkzeuge or consult our application specialists for process optimisation. SNMG 120402 T9215 indexable turning insert — ISO SNMG geometry for turning SNMG120402 T9215 is an indexable turning insert designed for medium-steel machining, offering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts ISO SNMG 120402 geometry CVD-coated carbide grade T9215 Double-sided chipbreaker for reliable chips Square 12 mm insert, 4.76 mm thickness Boost throughput with consistent edge life The CVD-coated carbide grade T9215 combines high wear resistance with fracture resistance, which supports longer tool life under typical production turning conditions. For shops needing steady productivity, this composition reduces downtime for insert changes and maintains cutting performance during continuous and slightly interrupted cuts. The result is fewer interventions at the machine and a more predictable production rhythm, making the grade particularly suited to medium-carbon and alloyed steels where balance between tool life and edge stability is crucial. Secure fit and predictable geometry for repeatable accuracy ISO compatibility ensures the insert matches standard clamping systems: form, relief angle, tolerance class, fastening method, size and thickness determine compatibility with the chosen holder. The insert has a 0° clearance angle and a square 12 mm format with 4.76 mm thickness, and is supplied with a cylindrical hole for positive locating and secure fastening. These geometric details translate into reproducible seating and consistent cutting angles across batches, improving dimensional repeatability and reducing set-up variation on external and internal turning operations. Effective chip control and straightforward application guidance The double-sided chipbreaker is engineered to control swarf during turning and to be effective across a range of feeds and depths typical for medium-steel work. A corner radius of 0.2 mm provides a good compromise between surface finish and edge strength for semi-finishing and medium turning passes. Selection of the correct chipbreaker and grade for the workpiece and machining stability remains important; when paired with the right holder and cutting parameters, the insert delivers stable cutting, reliable swarf control and consistent surface quality. Metav Werkzeuge can advise on matching insert, holder and cutting data for specific parts and machines. Select the Tungaloy SNMG120402 for productive medium-steel turning and contact Metav Werkzeuge for application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6950986-Tungaloy Manufacturer item no: 6950986 Manufacturer SKU: TUN6950986 Model series: ISO turning indexable inserts Designation: SNMG120402 T9215 Application: Turning Core technical data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included angle: 90° Hole: with cylindrical hole Special features CVD-coated carbide grade T9215 Double-sided chipbreaker Square insert form (SNMG) ISO-compatible geometry for standard holders Suitable for external and internal turning Optimised for continuous to lightly interrupted cuts FAQ What materials is this insert suited for? The SNMG120402 T9215 insert is optimised for medium-steel machining, offering a combination of wear resistance and toughness suitable for alloyed and medium-carbon steels. Is the insert reversible or single-use per edge? This is a double-sided insert, so both faces can be indexed for a fresh cutting edge, effectively providing multiple usable edges before disposal. Which holders are compatible with the SNMG120402 geometry? Compatibility follows ISO SNMG standards; holders that match the SNMG form, relief angle, tolerance class, fastening method, size and thickness will accept the insert reliably. What surface finish and cutting purpose does a 0.2 mm radius support? A 0.2 mm corner radius is suitable for semi-finishing and general turning where a compromise between edge strength and surface quality is required, giving stable cutting with good surface results. Can the insert handle light interruptions in the cut? Yes. The T9215 grade combines fracture resistance with wear resistance, making it appropriate for continuous to lightly interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, precise 0.2 mm nose radius, and a double-sided chipbreaker for consistent productivity in medium steel turning; order via Metav Werkzeuge or contact our consultants for application guidance. SNMG120402 T9215 — SNMG 120402 Turning Insert (CVD-coated carbide, square, 0.2 mm) by Tungaloy A SNMG120402 T9215 indexable turning insert developed for medium steel machining, offering robust wear resistance and reliable performance in continuous to lightly interrupted cuts. CVD-coated cemented carbide grade T9215 ISO SNMG 120402 square form 0.2 mm nose radius for fine finishing Double-sided chipbreaker with cylindrical hole High productivity for medium steel turning The insert delivers predictable machining results thanks to the T9215 grade, a CVD-coated cemented carbide that balances wear resistance with fracture toughness. This combination enables longer tool life under sustained cutting conditions and supports higher cutting speeds without compromising component quality. The design focuses on efficiency: less frequent index changes and steady surface finish help reduce cycle times and improve overall throughput in serial production. Secure clamping and wide holder compatibility Designed to the ISO SNMG 120402 standard, the square indexable insert fits common external and internal turning holders when the form, clearance angle, tolerance class, attachment method, size and thickness match. The insert’s cylindrical hole and standardised geometry make integration into ISO holders straightforward, minimising set-up time and simplifying inventory management for workshops that run mixed tool systems. Coating and substrate explained for reliable wear control The grade combines a wear-resistant CVD coating with a tough cemented carbide substrate. The coating reduces adhesive and abrasive wear on the cutting edge, while the substrate absorbs cutting forces and resists chipping. For users less familiar with coating technology: CVD (chemical vapour deposition) forms a uniform layer that improves edge stability and keeps flank wear low, especially during long uninterrupted cuts. Application guidance and chip control The insert’s double-sided chipbreaker is optimised for medium steel and works well in continuous to light interrupted cuts; it promotes predictable chip formation and evacuation to protect the workpiece and toolholder. With a 0.2 mm nose radius, the geometry favours fine finishing passes and tight dimensional control. For heavier interrupted cuts, a different geometry or a larger radius may be preferable to increase edge strength. For tailored advice on integrating the Tungaloy SNMG120402 T9215 insert into machining chains or to request application-specific recommendations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical consultation. Technical Data Article number: 6950976-Tungaloy Manufacturer article number: 6950976 Manufacturer SKU: TUN6950976 Model series: ISO turning indexable inserts Grade: T9215 (CVD-coated cemented carbide) Material: Cemented carbide Core specifications ISO designation: SNMG120402 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included angle: 90° Design features Square insert With cylindrical hole Double-sided chipbreaker CVD-coated cemented carbide For external and internal turning Suitable for continuous to light interrupted cuts Manufacturer: Tungaloy FAQ What materials is this insert suitable for? The Tungaloy SNMG120402 T9215 insert is primarily intended for medium steel machining; the T9215 grade provides a balance of wear resistance and toughness suited to these materials. How does the T9215 grade differ from general-purpose grades? T9215 is a CVD-coated cemented carbide grade that emphasises wear resistance while retaining edge security, making it especially productive for continuous and lightly interrupted turning of medium steel. Which holders are compatible with SNMG120402 inserts? Compatibility depends on holder form, clearance angle, tolerance class, attachment type, size and thickness; holders designed for ISO SNMG120402 inserts with matching specifications will be compatible. Can the insert be used for internal turning as well as external turning? Yes, the ISO SNMG120402 geometry and cylindrical hole allow the insert to be used in both external and internal turning applications when installed in appropriate holders. What does the 0.2 mm radius imply for surface finish? A 0.2 mm nose radius favours finer surface finish and accurate dimensional control; it is suited to finishing passes and applications where tight tolerances are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9215, the 0.2 mm corner radius and the double-sided design for sustained productivity and predictable tool life; order the genuine insert via Metav Werkzeuge or consult our technical team for optimal chipbreaker and holder matching. SNMG 120402 T9215 – Turning indexable insert (Tungaloy) The SNMG120402 T9215 is a 90° ISO square indexable turning insert designed for medium-steel applications, combining CVD-coated carbide performance with a double-sided, hole-mounted format. CVD-coated carbide grade T9215 ISO SNMG120402 form, 90° square Double-sided with cylindrical hole 0.2 mm corner radius, 4.76 mm thickness Consistent wear resistance for productive medium-steel turning The combination of a CVD-coated surface and cemented carbide substrate delivers a reliable balance between wear resistance and fracture toughness. Grade T9215 is formulated for the middle range of steel machining, enabling high material removal rates in continuous to slightly interrupted cuts. The result is fewer tool changes, steadier dimensional results and predictable insert life, which supports lean production planning and reduces unplanned downtime. Secure seating and standardised compatibility reduce setup risk The insert conforms to the ISO SNMG120402 geometry, so compatibility with holders depends on matching the insert form, relief angle, tolerance class, clamping method, size and thickness. The square, 90° shape with a cylindrical hole ensures positive location and repeatable clamping when used with a suitable external holder, shim and fastening screws. The standardised interface simplifies tool inventory and makes toolholder selection straightforward for workshop engineers. Double-sided design and small corner radius for efficient machining A double-sided insert halves index change frequency compared with single-sided equivalents, improving cost per index. The 0.2 mm corner radius supports fine turning and finish passes where edge strength and surface integrity are required. Pairing the correct chipbreaker with T9215 extends the operating window: select the breaker and cutting parameters suited to stability and feed to balance surface finish and productivity. System-level recommendations for reliable results Insert performance depends on the whole cutting system: ISO insert, matching external holder, shim/clamp and replacement screws. For medium steels, choose stable clamping and minimise overhang to reduce vibration. Where interrupted cuts are anticipated, ensure sufficient edge toughness by adhering to recommended feeds and depths; the grade is engineered to tolerate light interruptions while maintaining stable chip formation. For application-specific advice or further technical data, straightforward consultation with our team will help configure the optimal assembly. Choose genuine Tungaloy SNMG120402 T9215 inserts for robust, repeatable medium-steel turning — contact Metav Werkzeuge to specify the correct chipbreaker and holder or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6966180 SKU: 6966180-Tungaloy Manufacturer SKU: TUN6966180 Model series: ISO-Drehwendeschneidplatten Designation: SNMG120402 T9215 Facts Corner radius: 0.2 mm Size: 12 mm Thickness: 4.76 mm Relief angle: 0° Shape: square (90°) Hole: with cylindrical hole Special features Material: carbide Coating/grade: CVD-coated grade T9215 Double-sided insert Application: turning Chipbreaker: double-sided Typical system: ISO insert, external holder, shim/clamp and fastening screws Suited for medium steel, continuous to lightly interrupted cuts FAQ Which materials is this insert best suited for? The SNMG120402 T9215 insert is optimised for medium-steel machining and performs well in continuous to slightly interrupted cuts. Is the insert indexable and reversible? Yes, the SNMG120402 is a double-sided, indexable turning insert that can be rotated to present fresh cutting edges. How is the insert secured in the holder? The insert uses a cylindrical hole for positive location and is clamped by the matching external holder, shim and screws; compatibility depends on form, relief angle and tolerance class. What benefits does grade T9215 provide compared with other grades? Grade T9215 offers an effective blend of wear resistance and edge toughness, supporting higher productivity in medium-steel applications while maintaining good surface integrity. What are the key dimensional details to note before ordering? Note the 0.2 mm corner radius, 12 mm size, 4.76 mm thickness and square 90° geometry to ensure correct holder selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade and precise ISO dimensions to ensure consistent performance in medium to heavy steel turning; order directly via Metav Werkzeuge or request application advice from our consultants. SNMG120402 T9225 SNMG turning insert for turning by Tungaloy — CVD-coated carbide, 0° rake The SNMG120402 T9225 is an ISO-standard turning insert engineered for external and internal turning, offering a universal grade suited to interrupted cuts and varying engagement conditions. CVD-coated carbide grade T9225 Suitable for medium to heavy steel machining Double-sided chipbreaker for stable chips ISO SNMG120402 square insert, 0.2 mm corner radius Predictable performance for medium to heavy steel turning The insert is supplied in a carbide substrate with a CVD-coated surface and the T9225 grade, designed to combine toughness with wear resistance. This balance reduces edge chipping under variable cutting conditions, making the component particularly suitable for medium to heavy steel operations. Using an insert with these properties helps maintain cutting parameters for longer periods, which translates into fewer tool changes and more stable production runs. Compatibility with standard ISO holders ensures integration into common turning systems without the need for special adapters. Design features that support process stability Built as a square insert with a 0.2 mm corner radius and a 4.76 mm thickness, the geometry promotes rigidity and predictable chip formation. The 0° rake contributes to a neutral cutting action that is beneficial when facing interrupted cuts or when workpiece support is limited. The double-sided chipbreaker provides consistent chip control on both active edges, extending usable tool life per index and enhancing uptime. These characteristics together reduce the risk of unexpected tool failure and support reliable cycle times. Compatibility, mounting and application advice Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness with the chosen holder or boring bar. The insert is supplied with a cylindrical hole for positive location and secure fastening in compatible clamps. Typical uses include external and internal turning; select the chipbreaker and grade according to workpiece alloy, stability of the setup and the required surface finish. For specification checks, reference the ISO SNMG120402 designation to confirm fitment with existing tooling systems. Operational benefits and productivity gains Adopting this CVD-coated carbide insert yields measurable benefits: improved resistance to flank wear under continuous loading, more consistent surface finish across batches and enhanced tolerance to interrupted cuts. The Tungaloy engineering focus on robust grades supports repeatable performance, making the insert a practical choice where process reliability is a priority. Where higher heat or abrasive conditions are expected, the coating and substrate combination help maintain the cutting edge and reduce the frequency of regrinding or replacement. For tailored machining advice or to secure SNMG120402 Tungaloy inserts, contact Metav Werkzeuge for application support via info@metav-werkzeuge.com or call +49 2822 7131930 Product details Manufacturer article number: 6966181 SKU: 6966181-Tungaloy Manufacturer SKU: TUN6966181 Model series: ISO-Drehwendeschneidplatten Material: carbide Core measurements Size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Rake angle: 0° Cutting angle: 90° Design and features ISO designation: SNMG120402 Grade/sort: T9225 (CVD-coated) Geometry: square insert Chipbreaker: double-sided Hole: with cylindrical hole Typical application: external and internal turning FAQ What materials is this insert suitable for? The insert in grade T9225 is formulated for robust performance in medium to heavy steel machining and is tolerant of variable engagement and light interruptions. How is the insert mounted in a holder? The SNMG120402 has a cylindrical hole for positive location; fitment requires a compatible ISO SNMG clamping seat and matching tolerance class. Is the chip control suitable for interrupted cuts? Yes, the double-sided chipbreaker and the tougher CVD-coated grade provide improved resistance to edge chipping during interrupted cuts. What does the 0.2 mm corner radius affect in practice? A 0.2 mm corner radius offers a compromise between edge strength and the ability to produce fine surface finishes, reducing the risk of edge chipping compared with sharper radii. Which properties does the T9225 grade emphasise? T9225 is a universal, CVD-coated carbide grade that prioritises toughness and wear resistance for consistent performance across a wide range of steel machining tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 T9225 Wendeplatten - Tungaloy
Benefit from reliable, productive turning with a CVD-coated carbide grade that combines toughness and stable chip formation; the 0.2 mm corner radius and 90° geometry deliver enhanced edge strength and consistent performance. Order the SNMG120402 T9225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120402 T9225 — SNMG turning insert by Tungaloy, CVD-coated carbide, 90° The SNMG120402 T9225 is an ISO-standard square turning insert intended for external and internal turning applications in medium to heavy steel machining, offering a universal grade for varying engagement conditions. CVD-coated carbide grade T9225 90° square insert with 0.2 mm corner radius Double-sided chipbreaker, cylindrical hole Designed for medium to heavy steel turning Higher productivity with a universal cutting grade The combination of a CVD-coated carbide substrate and the T9225 grade creates a balance between wear resistance and toughness suitable for medium to heavy turning. This composition promotes stable chip formation under changing engagement conditions and mildly interrupted cuts, reducing downtime for tool changes and sharpening. The moderately reinforced cutting edge—supported by a 0.2 mm corner radius—improves edge security where intermittent contact or tougher workpiece zones occur, translating into more predictable tool life and consistent cycle times. Consistent chip control and reliable surface finish Built with a double-sided chipbreaker and a cylindrical hole, the geometry ensures repeatable chip formation and straightforward mounting in compatible holders. The 90° square shape provides rigidity for facing and general purpose turning, while the 0° clearance angle keeps the insert profile compliant with ISO holder standards. Together, these features enhance chip control and help maintain surface quality during longer passes, so machinists can rely on steady results rather than frequent parameter tweaks. Seamless integration into ISO tool systems for easier planning As part of an ISO insert series, compatibility with external holders depends on form, clearance angle, tolerance class, fastening method, size and thickness—factors that are standardised to simplify selection. The insert is 4.76 mm thick, nominally 12 mm in size and supplied with a central hole for secure clamping; these measurable attributes make inventory management and tool change procedures more efficient. Choosing an insert from a proven series reduces setup uncertainty and supports lean workshop processes, allowing planners to specify tooling that fits established tool holders and clamping kits. For tailored advice on machining strategies or to reserve the Tungaloy SNMG120402 T9225 insert (SKU: TUN6950991), contact Metav Werkzeuge for availability and application guidance Technical Data Article number: 6950991 Manufacturer SKU: TUN6950991 Label / SKU: 6950991-Tungaloy Series: ISO-Drehwendeschneidplatten Material: carbide Grade: T9225 Facts Insert size: 12 mm Corner radius: 0.2 mm Thickness: 4.76 mm Geometry angle: 90° Clearance angle: 0° ISO designation: 120402 Special features Double-sided chipbreaker Cylindrical hole (with hole) Square plate form CVD-coated carbide Intended application: turning FAQ What materials is this insert recommended for? The SNMG120402 T9225 insert is specified for medium to heavy steel machining; the T9225 grade and CVD-coated carbide make it suitable where toughness and wear resistance are required. Can this insert handle interrupted cuts? Yes. The robust grade and 0.2 mm corner radius provide increased edge strength, making the insert appropriate for mildly interrupted cuts in steel. How is the insert secured in the holder? The insert features a cylindrical central hole for clamping; compatibility depends on holder form, clearance angle and fastening method as per ISO standards. Is the chipbreaker suitable for long turning passes? The double-sided chipbreaker is designed to support consistent chip control over extended passes, improving surface finish and reducing the need for frequent adjustments. Which holder types accept this ISO designation? Holders that match the SNMG120402 ISO form, 90° geometry, 4.76 mm thickness and the 12 mm size will accept this insert; selection should consider tolerance class and fastening specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade and a compact, ISO‑standard geometry for dependable medium to heavy turning operations; order the inserts via Metav Werkzeuge or contact our consultants for tailored recommendations. SNMG 120402 T9225 indexable turning insert — 90° square geometry, CVD‑coated carbide SNMG120402 T9225 is an ISO‑standard turning insert designed for general turning tasks where robust cutting performance and consistent chip control are required. CVD‑coated carbide for extended tool life Universal T9225 grade for medium to heavy steel turning Double‑sided chipbreaker for reliable chip control Square 12 mm size, 90° geometry for versatile use Consistent cutting performance for demanding steel work The SNMG120402 is engineered as a CVD‑coated carbide insert that offers a balance of toughness and wear resistance. The T9225 grade provides a robust universal solution for medium to heavy steel turning, especially where interrupted cuts or varying engagement demand increased edge strength. The square 90° geometry ensures stable contact and predictable cutting forces, which helps to maintain part tolerances and reduce vibration. By combining a hardened coating with a substrate designed for longevity, this insert reduces the frequency of tool changes and supports steady production throughput. Improved surface quality and dependable chip control A double‑sided chipbreaker integrated into the geometry promotes consistent chip formation across a range of feeds and depths of cut, leading to improved surface finish and fewer issues with chip evacuation. The 0.2 mm corner radius allows controlled edge engagement, suitable for finishing to semi‑roughing passes without compromising dimensional accuracy. Because the insert is indexable, each turn of the part can use a fresh cutting edge, which maintains performance over longer cycles and simplifies tool management in the workshop. ISO compatibility for straightforward toolholder selection ISO standardisation simplifies tooling logistics: compatibility with the chosen toolholder is determined by insert form, clearance angle (0°), tolerance class, fastening method, size and thickness. The SNMG form and its cylindrical hole ensure secure clamping in many common external holders and boring bars, enabling fast changeovers and reliable seating. For production shops that standardise on ISO solutions, this insert integrates easily into existing toolsets and supports repeatable set‑ups that reduce downtime. Contact Metav Werkzeuge for ordering guidance on the Tungaloy SNMG120402 T9225 insert and to discuss optimal holder combinations for specific turning tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6950978 SKU: 6950978-Tungaloy Manufacturer article number: TUN6950978 Facts ISO designation: SNMG120402 Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included angle: 90° Special features Material: carbide Coating: CVD (grade T9225) Application: turning (external and internal) Chipbreaker: double‑sided Insert shape: square Hole style: cylindrical hole System components: indexable insert, matching outer holder or boring bar, clamp/locating pad and replacement screws FAQ What materials is this insert intended for? The SNMG120402 T9225 insert is specified for medium to heavy steel turning, offering a robust universal grade suited to varying engagement conditions. How does the T9225 coating influence tool life? The CVD coating on the T9225 grade increases wear resistance and supports longer cutting cycles, so the insert maintains edge integrity under demanding turning applications. Is this insert compatible with standard ISO toolholders? Yes. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the SNMG120402 follows ISO geometry for straightforward holder selection. What benefits does the double‑sided chipbreaker provide? The double‑sided chipbreaker ensures stable chip formation across different feeds and depths, improving surface finish and reducing the risk of chip‑related interruptions. Does the insert suit interrupted cuts? The robust composition of the T9225 grade gives additional toughness, making the insert suitable for operations with mild interruptions or variable engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120404 AH110 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant PVD coating, sharp cutting edge and ISO compatibility for stable turning cycles and reduced tool changes. Order the SNMG120404 AH110 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120404 AH110 ISO turning insert — PVD-coated carbide for turning (Tungaloy) The SNMG120404 AH110 is an ISO-indexable turning insert designed for external and internal turning with a square, 12 mm form and a cylindrical hole for secure clamping. SNMG120404 form, 90° cutting geometry PVD-coated carbide grade AH110 for wear resistance Double-sided chipbreaker for consistent chips Cylindrical-holed, indexable square insert 4.76 mm thick Delivering consistent tool life and surface quality The combination of the AH110 grade and PVD coating ensures a balance between wear resistance and a sharp cutting edge, which in practice means fewer insert changes and more predictable production runs. The PVD layer reduces flank wear and helps maintain dimensional accuracy over longer cutting distances; this is especially important in high-volume turning where downtime is costly. The result is improved component repeatability and reduced quality sorting. Predictable chip formation for safer machining A double-sided chipbreaker design provides controlled chip formation and evacuation in a variety of turning operations. Stable chips reduce the risk of workpiece damage and make coolant and chip-conveyor requirements more predictable, contributing to smoother shifts and fewer interruptions. Selecting an appropriate chipbreaker and grade supports both process reliability and consistent surface finish in repeated production cycles. Fast integration into ISO tooling systems to save set-up time As an ISO-standard insert, the SNMG120404 AH110 matches common indexable holders when form, 0° relief angle, tolerance class, clamping method, size and thickness are aligned. The square 12 mm plate with a 0.4 mm corner radius and 4.76 mm thickness is compatible with many external holders and boring bars, which simplifies inventory and shortens set-up times. Clear matching of holder and insert minimises rework and contributes to a smooth tool-change routine. Application focus and recommended process approach This PVD-coated carbide insert is intended where a sharp edge and process security are required; it is suitable for general turning tasks when the cutting data and holder stability are chosen accordingly. For best results, pair the insert with a holder and cutting parameters that reflect the chosen chipbreaker, workpiece material and desired surface finish. The combination supports efficient material removal while preserving edge integrity during intermittent cuts. For process-secure turning with Tungaloy’s AH110 grade, contact Metav Werkzeuge for availability and expert selection and ensure the correct holder compatibility for optimal performance. Technical data Article number: 6806652 Manufacturer SKU: TUN6806652 SKU: 6806652-Tungaloy Model series: ISO turning inserts Facts Geometry: SNMG120404 Corner radius: 0.4 mm Included hole: with cylindrical hole Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Cutting angle: 90° Special features Material: Carbide (cemented) Coating / grade: PVD-coated, AH110 Chipbreaker: Double-sided Plate form: Square Typical application: Turning (external and internal) FAQ What holder types are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the SNMG120404 AH110 matches standard ISO SNMG holders when these parameters align. Which benefits does the AH110 grade provide? The AH110 grade on the SNMG120404 AH110 offers wear resistance and edge stability due to its PVD coating, supporting longer tool life and consistent surface finish. Is the insert indexable on both sides? Yes, the insert features a double-sided design allowing indexing to the second cutting edge, which extends useful life per insert. How does the 0° relief angle affect cutting? A 0° relief angle gives a neutral geometry suitable for general turning; it requires appropriate holder support to prevent rubbing and to maintain accuracy. What are the main features to check when replacing inserts? Check geometry (SNMG120404), corner radius, plate thickness (4.76 mm), hole type (cylindrical) and chipbreaker; matching these ensures correct seating and repeatable results with the SNMG120404 AH110. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH120 Wendeplatten - Tungaloy
Benefit from the PVD-coated AH120 grade and a 0.4 mm nose radius for consistently sharp, wear-resistant turning; combine these properties with the ISO form and secure cylindrical hole mounting for stable chip control — order directly via Metav Werkzeuge or consult the specialists for application advice. SNMG120404 AH120 Turning Insert — PVD-coated carbide, 0.4 mm radius (Tungaloy) A robust ISO indexable turning insert, SNMG120404 AH120, engineered for stable, sharp-edge performance in general turning operations with secure, hole-mounted clamping. PVD-coated carbide for wear resistance Sharp cutting edge and process security 0.4 mm nose radius for fine finishing Square insert with cylindrical hole mounting High process stability from a wear-resistant grade The AH120 grade is a PVD-coated carbide developed to deliver consistent wear resistance and a reliable cutting edge in turning operations. The coating reduces flank and crater wear, which helps maintain cutting geometry for longer tool life and fewer indexings. By prioritising process security, the grade minimises unplanned interruptions and supports steady cycle times in production environments. Controlled chip formation and stable cutting behaviour Equipped with a double-sided chipbreaker, the insert provides predictable chip control and stable cutting behaviour across a range of turning tasks. The chipbreaker design, paired with the sharp edge of the grade, reduces the risk of built-up edge and sudden chipping, meaning fewer stoppages for clearing or rework. This combination enhances throughput while maintaining component surface quality. Designed geometry and secure mounting for repeatable results The insert follows the ISO SNMG120404 form: a square plate with a cylindrical hole and a 0° clearance angle, 12 mm nominal size and a plate thickness of 4.76 mm. The 0.4 mm nose radius supports fine finishing and dimensional consistency at the cutting edge. Secure mounting via the cylindrical hole and appropriate clamping hardware ensures repeatable seating; compatibility with holders depends on form, clearance angle, tolerance class, fastening method, size and thickness. Practical system advantages and selection guidance As part of an indexable system the insert is used together with an external holder or boring bar, plus underlay/clamping sets and replacement screws. Selecting the right chipbreaker and the AH120 grade should be guided by workpiece characteristics and machining stability requirements: the aim is a balance between surface finish and tool life. The net result is longer tool life and repeatable performance, reducing setup variability and supporting predictable production output. For application advice or to secure supply of the Tungaloy SNMG120404 AH120 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultants are available to recommend the right holder and clamping components for the machining task. Technical data Article number: 6811952 Manufacturer SKU: TUN6811952 SKU: 6811952-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade / coating: AH120 (PVD-coated) Designation: SNMG120404 Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 12 Included hole: with hole (cylindrical) Relief / clearance angle: 0° Insert angle: 90° Special features Double-sided chipbreaker Square plate geometry Cylindrical hole for secure mounting PVD-coated carbide for wear resistance System components: compatible holder or boring bar, underlay/clamping set, replacement screws Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What distinguishes the AH120 grade from other grades? The AH120 grade is a PVD-coated carbide designed for turning where a sharp cutting edge and high process security are required; the coating improves wear resistance and edge stability. How is the SNMG120404 mounted in the toolholder? The SNMG120404 uses a cylindrical hole and is clamped with the appropriate underlay or clamping set; secure seating ensures repeatable positioning and stable cutting. Is the insert suitable for fine finishing operations? Yes — the 0.4 mm nose radius on the insert supports fine finishing and good dimensional control at the cutting edge. Does the insert provide chip control for different turning tasks? The double-sided chipbreaker offers predictable chip formation and helps maintain process stability across varied turning conditions. What determines whether this insert is compatible with a specific holder? Compatibility is defined by ISO form, clearance angle, tolerance class, fastening style, nominal size and plate thickness; matching these parameters ensures correct fit and function. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH120 Wendeplatten - Tungaloy
The combination of a PVD‑coated carbide grade and a 0.4 mm corner radius delivers reliable cutting performance and consistent surface finish for general turning applications; the double‑sided chipbreaker adds flexibility while extending tool life. Order the insert directly via Metav Werkzeuge or contact our advisers for further technical support. SNMG120404 AH120 indexable turning insert — PVD‑coated carbide, 0.4 mm radius, by Tungaloy The SNMG120404 AH120 is an ISO‑standard indexable insert designed for general turning, offering a wear‑resistant coating and a geometry matched to common external and internal turning operations. PVD‑coated carbide AH120 for wear resistance Double‑sided chipbreaker for versatile turning 0.4 mm corner radius for accurate finishes ISO SNMG 120404, square insert with central hole Consistent machining performance through optimised coating and edge preparation The SNMG120404 AH120 insert combines a PVD coating with a tough carbide substrate to provide stable cutting behaviour and extended edge life under typical turning conditions. The coating reduces abrasion and thermal softening during the cut, which in turn supports process reliability and longer tool cycles. For production environments where repeatability and predictable tool life are priorities, the coated carbide grade delivers measurable benefits in reduced tool changes and more consistent workpiece quality. Predictable chip control and finish thanks to the chipbreaker geometry A double‑sided chipbreaker is integrated to guide chip formation under a range of feeds and depths of cut; this feature simplifies selection of the insert for both roughing and finishing passes. The chipbreaker helps convert small, fragmenting chips into controlled curls, lowering the risk of chip entanglement and protecting the workpiece surface. With a 0.4 mm corner radius, the geometry balances strength and finish capability, enabling a fine surface on light finishing cuts while retaining adequate edge support for interrupted or unstable cuts. Compatibility and secure clamping for ISO holder systems Designed as an ISO standard SNMG insert, the geometry and size align with established holder specifications: square form, central cylindrical hole and a 90° included angle. Compatibility with a given holder depends on form, clearance (relief) angle, tolerance class, fastening method, size and thickness; this makes the insert straightforward to integrate into existing toolholders when the holder matches the ISO SNMG family. The central hole and standard dimensions facilitate secure clamping and repeatable seating, contributing to machine‑side stability and process control. Practical advantages for workshop logistics and selection The insert is double‑sided, which effectively doubles the number of available cutting edges per insert compared with single‑edged solutions, improving inventory efficiency. As a PVD‑coated grade optimised for wear and fracture resistance, the AH120 sort is particularly suited where a sharp cutting edge and robust performance are both required. For users less familiar with technical coatings: PVD (physical vapour deposition) forms a thin, adherent layer that enhances hardness and reduces friction at the cutting zone, improving tool life without altering the base carbide’s toughness. Choose Tungaloy SNMG120404 AH120 via Metav Werkzeuge for consistent turning performance and reliable process security — contact Metav Werkzeuge for tailored advice or additional technical data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: 6806695-Tungaloy Manufacturer article number: 6806695 Manufacturer SKU: TUN6806695 Model series: ISO‑Drehwendeschneidplatten Label: SNMG120404 AH120 Tungaloy insert Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 90° Relief (free) angle: 0° Special features Material: PVD‑coated carbide (AH120) Geometry: square insert, central cylindrical hole Chip control: double‑sided chipbreaker Application: turning (external and internal) Compatibility determined by form, relief angle, tolerance, fastening, size and thickness Suitable where a sharp cutting edge and process reliability are required FAQ Is this insert suitable for both roughing and finishing? The SNMG120404 AH120 insert, with its double‑sided chipbreaker and 0.4 mm corner radius, is suitable for a range of turning tasks from light finishing to general roughing where a secure edge and chip control are needed. What material and coating does the insert use? This Tungaloy indexable turning insert is a PVD‑coated carbide (AH120) grade, designed to combine wear resistance with fracture toughness for stable turning performance. Can the insert be used in standard SNMG holders? Yes, the SNMG120404 AH120 follows ISO dimensions for SNMG inserts; compatibility requires a holder matching the insert’s form, relief angle, tolerance class, fastening method, size and thickness. How many usable edges does each insert provide? The insert is double‑sided, providing multiple usable cutting edges per insert which improves tool economy and reduces replacement frequency. What is the recommended corner radius for precision finishing? The integrated corner radius is 0.4 mm, a compromise between edge strength and the ability to achieve a fine surface finish on finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH120 Wendeplatten - Tungaloy
SNMG120404 AH120 Drehwendeschneidplatte von Tungaloy SNMG120404 AH120 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen mit hoher Prozesssicherheit SNMG120404 AH120 PVD-beschichtet für hohe Standzeit Quadratische Plattenform 12 mm für stabile Auflage Eckenradius 0,4 mm für scharfe Schneidkante Doppelseitiger Spanbrecher für wirtschaftliche Zerspanung Zylindrisches Loch, Plattendicke 4,76 mm, Freiwinkel 0° Höhere Produktivität durch stabile Schneidkante Dank der PVD-beschichtung und der verschleißfesten Hartmetall-Zusammensetzung bietet diese Wendeschneidplatte eine gleichbleibend scharfe Schneidkante. Die Folge ist eine bessere Oberflächenqualität bei vermindertem Werkzeugwechselaufwand, wodurch sich Rüstzeiten und Stillstandszeiten in der Fertigung reduzieren lassen. Dieser Vorteil macht die Platte besonders geeignet für Serien- und Schruppprozesse, bei denen Standzeit und Prozesssicherheit zählen. Robustheit und Verschleißverhalten erklären Die Sorte AH120 ist speziell auf verschleiß- und ausbruchfeste Anforderungen abgestimmt; die Kombination aus Trägerwerkstoff und PVD sorgt für erhöhte Verschleißfestigkeit bei gleichzeitig guter Kantenschärfe. PVD steht für eine physikalische Schichtabscheidung, die dünne, harte Schichten erzeugt und so die Lebensdauer der Schneidkante verlängert. Für Anwender bedeutet das: Konstantere Bearbeitungsleistungen und weniger Nacharbeit. Einsatzgebiet und Werkstoffabdeckung Die Platte eignet sich für verschiedenste Drehanwendungen, insbesondere für Außen- und Innendrehen. Bei der Wahl von Schnittdaten und Spanbrecher ist die Werkstoffgruppe und die Bearbeitungsart ausschlaggebend; die doppelseitigen Spanbrecher ermöglichen flexible Einstellmöglichkeiten für unterschiedliche Spanformen. Für Stahl- und legierten Stahl-Bearbeitungen liefert die Platte eine zuverlässige Balance aus Zerspanleistung und Kantensicherheit. Montage, Normen und Kompatibilität Als ISO-genormte Drehwendeschneidplatte ist die Kompatibilität zum Halter über Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke definiert. Die quadratische Plattenform mit 12 mm Kantenlänge und das zylindrische Loch gewährleisten eine sichere Auflage im passenden Außenhalter oder auf Bohrstange. Die Freiwinkelangabe 0° und der Keilwinkel von 90° sind bei der Auswahl des Halters zu beachten, damit die gewünschte Schneidgeometrie erreicht wird. Für produktive, prozesssichere Zerspanung empfehlen wir die SNMG120404 AH120 von Tungaloy; bei Fragen zu Schnittdaten oder Werkstoffanpassung gern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 6810252 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: SNMG120404 Hersteller SKU: TUN6810252 Daten Plattengröße: 12 mm Plattendicke: 4,76 mm Eckenradius: 0,4 mm Freiwinkel: 0° Winkel: 90° Besonderheiten Material: Hartmetall Beschichtung: PVD (physikalische Schichtabscheidung) Sorte: AH120 Plattenform: quadratisch Spanbrecher: doppelseitig Loch: zylindrisches Loch Schneidstofftyp: PVD-beschichtetes Hartmetall Anwendung: Drehen Einsatzhinweis: verschleiß- und ausbruchsfeste Sorte FAQ Welche Halter passen zur SNMG120404 AH120? Zur SNMG120404 AH120 passen ISO-konforme Außenhalter und Bohrstangen, die für quadratische Platten mit 12 mm Kantenlänge und zylindrischem Loch ausgelegt sind; auf die Toleranzklasse, den Freiwinkel 0° und die Plattendicke 4,76 mm achten. Für welche Werkstoffe ist die AH120-Sorte geeignet? Die AH120-Sorte ist für vielfältige Werkstoffgruppen ausgelegt, insbesondere für Stahl und legierten Stahl; die PVD-Beschichtung unterstützt dabei eine stabile Spanbildung und längere Standzeiten. Kann die Platte zum Innendrehen verwendet werden? Ja, die SNMG120404 AH120 eignet sich für Außen- und Innendrehen; die quadratische Form und die doppelseitigen Spanbrecher bieten hierfür die nötige Vielseitigkeit. Wie beeinflusst der Eckenradius 0,4 mm die Bearbeitung? Der Eckenradius 0,4 mm liefert eine scharfe Schneidkante, die feine Oberflächen ermöglicht und gleichzeitig die Kantensicherheit bei mittleren Schnitttiefen verbessert. Welche Vorteile bietet die PVD-Beschichtung praktisch? Die PVD-Beschichtung erhöht die Verschleißfestigkeit und die Temperaturbeständigkeit der Schneidkante, wodurch längere Standzeiten und konstantere Bearbeitungsergebnisse erreicht werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a universally applicable PVD-coated carbide grade, a 0.4 mm corner radius and ISO compatibility for steady production and predictable tool-life; order the insert directly via Metav Werkzeuge or contact the sales team for machining advice. SNMG 120404 AH6225 — SNMG120404 Turning Insert (PVD-coated), Tungaloy SNMG120404 AH6225 is an ISO‑standard indexable turning insert designed for external and internal turning of rostfreier Stahl in medium cutting conditions. SNMG120404 geometry for ISO toolholders PVD-coated carbide grade AH6225 0.4 mm corner radius for precise profiling Double-sided insert with cylindrical hole Consistent cutting performance for rostfreier Stahl The SNMG120404 series offers a PVD-coated carbide body engineered as a universal grade for rostfreier Stahl, balancing a sharp cutting geometry with a robust edge for changing conditions. The combination of the AH6225 grade and the coating produces a controlled wear pattern that supports reliable surface quality and repeatable dimensions during medium turning operations. This focus on consistency reduces unplanned tool changes and supports predictable cycle times on batch or mixed-production runs. Fast integration into ISO tool systems As an ISO‑normed plate, the insert fits standard indexable holders when matching form, clearance angle, tolerance class, fastening and thickness. The square plate (inscribed circle 12 mm) with a cylindrical hole and a nominal thickness of 4.76 mm allows straightforward clamping in common external holders and boring bars. The double-sided design doubles the usable edges per index and the 0° relief and 90° included angle provide familiar seating and cutting orientation, easing toolset standardisation and speeding changeovers. Coating and grade for stable chip formation The PVD layer on this carbide substrate enhances surface hardness and heat resistance while preserving a sharp initial edge; this enables good chip control with the specified doppelseitig chipbreaker layout. The grade is targeted at medium machining where intermittent cuts or varying feed rates occur, so the insert maintains performance across a range of cutting speeds. Selecting the appropriate chipbreaker variant in concert with the AH6225 grade ensures effective chip evacuation and reduced risk of built-up edge on rostfreier Stahl. Production benefits and recommended use Designed for both external and internal turning, the insert supports process stability and cost-efficient use thanks to indexability and a reliable cutting edge. The 0.4 mm corner radius is suitable for precise profiling and limited radii transitions, while the square form provides orientation flexibility. For best results, pair the plate with a holder matched to the ISO geometry and use cutting parameters optimised for medium removal rates; this approach yields a balance between productivity and surface finish without compromising tool life. Contact Metav Werkzeuge for application-specific recommendations on the SNMG120404 AH6225 Tungaloy turning insert and to arrange prompt supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6826080 SKU: 6826080-Tungaloy Manufacturer article number: TUN6826080 ISO designation: SNMG120404 Numbers / Core technical data Corner radius: 0.4 mm Inscribed circle / size: 12 mm Plate thickness: 4.76 mm Included angle: 90° Relief angle: 0° Special features Material: carbide Coating / grade: AH6225 (PVD-coated) Chipbreaker: double-sided Hole: with cylindrical hole Plate form: square Typical application: external and internal turning Model series: ISO turning indexable inserts FAQ What materials is this insert best suited to machine? The SNMG120404 AH6225 Tungaloy insert is formulated primarily for rostfreier Stahl; the PVD-coated carbide substrate and chipbreaker geometry provide stable performance when turning stainless grades. Is the insert compatible with standard ISO holders? Yes. The SNMG120404 geometry conforms to ISO standards and is compatible with holders that match the plate form, relief angle, tolerance and thickness. How many usable edges does the insert offer? The insert is double-sided, providing multiple indexable cutting edges before replacement is needed, improving cost efficiency per edge. What corner radius and plate thickness are specified? The plate features a 0.4 mm corner radius and a thickness of 4.76 mm, suitable for precise profiling and medium cutting conditions. Does the AH6225 grade include a coating and what is its benefit? AH6225 is a PVD-coated carbide grade; the coating increases heat and wear resistance while maintaining a sharp cutting edge, which helps with surface finish and consistent tool life on rostfreier Stahl. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of a sharp, stable cutting edge and PVD wear resistance combined with ISO compatibility for dependable turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG120404 AH6225 Turning Indexable Insert (ISO 120404) — Turning by Tungaloy The SNMG120404 AH6225 is an ISO-standard turning indexable insert designed for external and internal turning, offering a sharp yet durable cutting edge for medium machining of rostfreier Stahl. PVD-coated carbide for rostfreier Stahl Square 90° geometry for robust turning 0.4 mm nose radius for precise profiling Double-sided chipbreaker with cylindrical hole Reliable cutting performance for rostfreier Stahl and mixed conditions The combination of PVD-coated carbide and the AH6225 grade is engineered to provide a sharp, stable cutting edge under varying conditions. That balance supports consistently high metal removal rates during medium-duty operations on rostfreier Stahl, reducing the need for frequent index changes and helping to maintain cycle-time stability. As an ISO indexable insert, the component is compatible with a wide range of holders when the seat form, clearance, tolerance class, fastening method, size and thickness are matched, which simplifies tool sourcing and planning. Precise profiles and repeatable results with a 0.4 mm radius A 0.4 mm nose radius delivers controlled profile definition and improved surface integrity where tighter radii are required. The double-sided chipbreaker and cylindrical locating hole promote predictable chip formation and secure, repeatable seating in the toolholder, so setups remain stable across shifts. These features translate into fewer interruptions for reclamping or adjustment, supporting steady production runs and better process reliability. System compatibility that eases integration and tool management The insert’s 90° square geometry and 4.76 mm thickness offer structural rigidity that suits both facing and peripheral turning tasks. Being part of the ISO-Drehwendeschneidplatten series, the insert integrates into existing ISO tool systems and can be combined with matching holders, underlays and clamping sets. Selecting the AH6225 grade together with the appropriate chipbreaker helps extend tool life and can lower overall tooling costs by reducing unplanned tool changes and improving surface finish consistency. Contact Metav Werkzeuge for tailored application advice and fast supply of Tungaloy SNMG120404 AH6225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951013-Tungaloy Manufacturer SKU: TUN6951013 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts Insert size: 12 mm Thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Geometry angle: 90° ISO code: 120404 Manufacturer article number: 6951013 Special features PVD-coated carbide (AH6225) Double-sided chipbreaker Cylindrical locating hole Square insert, double-sided Suited for turning of rostfreier Stahl ISO-standard insert For external and internal turning Compatible with matched holders and clamping sets FAQ Which materials is this insert suitable for? The SNMG120404 AH6225 turning indexable insert from Tungaloy (SKU 6951013-Tungaloy) is primarily intended for rostfreier Stahl and performs well under medium machining conditions where a sharp yet stable edge is required. Can this insert be used for internal turning operations? Yes. The SNMG120404 geometry and chipbreaker design make the insert suitable for both external and internal turning when paired with the appropriate holder and access conditions. How does the AH6225 grade affect cutting performance? The AH6225 PVD-coated grade combines a sharp cutting edge with wear resistance, delivering consistent performance under variable conditions and helping to maintain surface quality over longer tool life. What should be checked to ensure compatibility with a toolholder? Compatibility depends on seat form, clearance angle, tolerance class, fastening type, size and thickness; the insert’s cylindrical hole and square form require a matching seat and correct clamping components. Is the insert indexable and easy to reseat during production? Yes. The double-sided design allows indexing to a fresh edge, and the cylindrical locating hole supports repeatable seating for quick, reliable insert changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH6225 for stable cutting performance and the ISO compatibility that simplifies holder selection; the result is dependable turning in stainless steels and predictable tool life. Order original Tungaloy inserts via Metav Werkzeuge or consult our specialists for application-specific advice. SNMG 120404 AH6225 – ISO turning insert for turning, Tungaloy The SNMG120404 AH6225 Tungaloy insert is an ISO-standard indexable turning insert designed for external and internal turning of stainless steels and similar materials. PVD-coated carbide grade AH6225 Optimised for stainless steels Double-sided chipbreaker ISO SNMG 120404, 0.4 mm corner radius Consistent performance for stainless-steel machining The combination of a PVD-coated carbide substrate and the AH6225 grade delivers a balance between a sharp cutting edge and edge stability for mid-range cutting conditions. This configuration reduces built-up edge risk when machining stainless steels, so operators benefit from improved dimensional consistency and fewer interruptions. The result is a reliable cutting process that supports steady cycle times and predictable tool-change intervals. Clear chip control and edge security for fewer interruptions An integrated double-sided chipbreaker and the geometrical design of the insert ensure reliable chip formation and evacuation during both external and internal turning. The 0.4 mm corner radius helps maintain an even wear pattern and supports edge strength where interrupted cuts or variable conditions occur. Good chip control reduces the likelihood of rework and protects the workpiece surface finish, enhancing overall process efficiency. ISO compatibility that simplifies tooling decisions Being an ISO SNMG 120404 plate, the insert fits standard SNMG external holders when form, clearance angle, tolerance class, fastening and thickness match the holder specification. The indexable design with a cylindrical hole and square form enables straightforward indexing and replacement, while the specified 4.76 mm thickness ensures mechanical stability in the tool pocket. This compatibility reduces tooling complexity across workshops using standard toolholders. Practical benefits for everyday production In practice, the insert supports a broad range of turning tasks thanks to the universal AH6225 grade: it is suitable for varying stainless-steel grades and changing cutting conditions without frequent grade swaps. Reduced tool change frequency and stable edge life contribute to higher productivity and lower lifecycle costs. The insert’s design also allows straightforward integration into a system comprising an external holder, shim or clamp set and replacement screws for fast maintenance. Contact Metav Werkzeuge for tailored machining recommendations and availability of original Tungaloy SNMG120404 AH6225 inserts. Email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6825961 SKU: 6825961-Tungaloy Manufacturer SKU: TUN6825961 Manufacturer: Tungaloy Data Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle / size: 12 mm Angle: 90° Clearance angle: 0° Double-sided / indexable Special features Material: PVD-coated carbide (AH6225) Application: Turning (external and internal) Chipbreaker: double-sided Plate form: square with cylindrical hole ISO designation: SNMG120404 System components: compatible holder, shim/clamp set, replacement screws Optimised for stainless steels FAQ Which materials are recommended for this insert? The SNMG120404 AH6225 Tungaloy insert is optimised for stainless steels and performs well in mid-range turning operations where a sharp yet stable cutting edge is required. Will this plate fit standard SNMG holders? Compatibility with SNMG holders depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the ISO designation SNMG120404 indicates suitability for standard SNMG toolholders that match these dimensions. What are the advantages of the AH6225 grade? AH6225 is a PVD-coated carbide grade developed for a balance of sharpness and edge robustness, giving good wear resistance and consistent performance across varying conditions when machining stainless steels. How does the chipbreaker influence machining? The double-sided chipbreaker promotes controlled chip formation and evacuation, which improves surface finish and reduces the risk of chip-related interruptions during turning. Is the insert reversible and easy to index? Yes, the plate is double-sided and indexable, featuring a cylindrical hole and a square form that allow straightforward indexing and replacement to extend tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Combine a sharp, stable cutting edge with a PVD-coated carbide grade and ISO compatibility to secure reliable, efficient turning of stainless steels; benefit from improved chip control and longer tool life. Order the SNMG 120404 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants for application advice. SNMG 120404 AH6225 ISO indexable turning insert — PVD-coated carbide, 0.4 mm radius | Tungaloy SNMG 120404 AH6225 is an ISO-standard indexable turning insert engineered for external and internal turning operations, optimised for stainless steels and medium machining conditions. PVD-coated carbide grade AH6225 Optimised for stainless steel machining Double-sided chipbreaker for reliable chips ISO SNMG120404 square insert, 0.4 mm radius Stable, sharp cutting for consistent material removal The SNMG 120404 AH6225 is built on a PVD-coated carbide substrate that combines a sharp cutting edge with edge-line stability for medium cutting tasks. The AH6225 grade is specified as a universal option for stainless steels, delivering a balance between wear resistance and edge toughness across varying conditions. The insert’s double-sided chipbreaker promotes predictable chip formation, reducing the risk of built-up edge and minimising interruptions in production. For non-specialists: the PVD layer increases hardness at the surface and improves heat resistance, so the insert holds its geometry longer under elevated cutting temperatures. Improved surface finish and productive cycle times A 0.4 mm radius at the corner and a 90° included angle create a robust edge geometry that supports consistent contact with the workpiece and reduces deflection in typical lathe setups. This geometry helps to achieve a better surface finish while maintaining process stability, which in turn can lower cycle times by reducing secondary operations and rework. The nominal 4.76 mm thickness contributes to rigidity when clamped in compatible holders, meaning fewer tool changes and improved overall machining economy. In practice, the combination of grade, coating and geometry supports repeatable results and predictable tool life in series production. Simple integration into existing turning systems Produced to ISO norms, this indexable insert integrates into standard external holders and boring bars when matched by shape, relief angle, tolerance class, clamping method, size and thickness. The typical system comprises the ISO insert, a suitable external holder or boring bar, a clamp set and replacement screws, allowing straightforward replacement and re-indexing. The square, double-sided design extends usable edges and reduces inventory complexity. For workshops seeking process stability, this insert offers a pragmatic route to consistent turning performance with familiar clamping arrangements. For tailored cutting data, holder compatibility advice and to order the SNMG 120404 AH6225 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; our consultants will assist with setup and parameter selection. Technical Data Article number: 6947280 SKU: 6947280-Tungaloy Manufacturer SKU: TUN6947280 Model series: ISO turning indexable inserts Core specifications ISO designation: SNMG120404 Insert size: 12 mm Corner radius: 0.4 mm Thickness: 4.76 mm Included angle: 90° Design & features Material: carbide Coating / grade: AH6225, PVD-coated Chipbreaker: double-sided Hole style: cylindrical hole Shape: square Application: Turning Relief angle: 0° FAQ Which materials is this insert best suited for? The SNMG 120404 AH6225 insert is specified as a universal grade for stainless steels, optimised for medium cutting operations and variable conditions. How does the AH6225 coating improve performance? The AH6225 PVD-coated carbide provides enhanced surface hardness and heat resistance, which improves wear behaviour and helps maintain a consistent cutting edge for longer tool life. Is the insert indexable and easy to reapply? Yes — the SNMG 120404 AH6225 features a double-sided, square design that allows rotation to a fresh cutting edge, enabling economical re-indexing during production. What determines compatibility with tool holders? Compatibility is governed by insert form, relief angle, tolerance class, clamping method, size and thickness; the SNMG120404 complies with ISO norms for straightforward integration into matching holders and boring bars. What are the typical applications for this cutting insert? This indexable insert is intended for external and internal turning, offering reliable chip control and repeatable surface quality when machining stainless steels under medium cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of a balance between sharp cutting performance and reliable edge stability: the PVD-coated AH6225 grade delivers consistent results on rostfreier Stahl, while the ISO SNMG120404 form and a 0.4 mm corner radius support stable, repeatable turning operations; order directly via Metav Werkzeuge or request specialist advice from their consultants. SNMG120404 AH6225 SNMG Turning Insert — PVD-coated carbide, 0.4 mm radius (Tungaloy) A SNMG120404 AH6225 turning insert designed for ISO-compliant external and internal turning, optimised for machining rostfreier Stahl with a sharp yet robust cutting edge. SNMG120404 ISO insert for turning applications PVD-coated carbide AH6225 for rostfreier Stahl machining Double-sided chipbreaker for stable cutting results 0.4 mm corner radius and 4.76 mm plate thickness Consistent cutting on rostfreier Stahl with a universal grade The SNMG120404 AH6225 indexable insert combines a PVD-coated surface with a wear-resistant carbide body to deliver a balance of sharpness and edge security when machining rostfreier Stahl. The AH6225 grade is formulated for medium cutting conditions and variable process stability, so the insert maintains surface quality without sacrificing tool life. The 0.4 mm corner radius supports a stronger cutting edge to resist chipping while producing consistent component geometries on challenging alloys. ISO form and dimensional clarity for straightforward integration The ISO designation guarantees compatibility across standard turning toolholders when the holder's form, clearance, tolerance class, fastening method, size and thickness match the insert. Key geometry details such as ISO SNMG shape, 0° clearance angle, cylindrical hole and square plate form simplify tool selection and procurement. Clear dimensional data makes it easier to match an existing turret or boring bar setup and reduces setup time in production environments. Productivity gains through stable chip control and predictable life A double-sided chipbreaker and the AH6225 coating promote reliable chip formation and evacuation, which reduces downtime from recutting and improves cycle consistency. The plate’s 4.76 mm thickness and 12 mm inscribed circle translate into mechanical rigidity for demanding turning tasks, while the moderate corner radius helps to extend the interval between indexings. Together, these features support higher effective productivity and lower overall process costs in medium-duty applications. Practical selection advice and application fit Selection should consider workpiece material, required surface finish and the machine-tool-holder rigidity. The insert is intended for external and internal turning; for optimal results, choose a holder and clamping set that match the SNMG120404 geometry and the planned cutting parameters. Technical advisors at Metav Werkzeuge can provide application-specific recommendations and machining parameter suggestions to align the insert’s strengths with production goals. For reliable machining with Tungaloy’s AH6225 grade and to confirm availability or application compatibility, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947275 Manufacturer article number: 6947275 Manufacturer SKU: TUN6947275 Brand SKU: 6947275-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle / size: 12 mm Included angle: 90° Clearance angle: 0° Hole: cylindrical hole Special features Material: Hartmetall Grade / coating: AH6225 (PVD-coated) Chipbreaker: double-sided Plate form: quadrilateral (square) Application: Drehen (turning) Intended for: rostfreier Stahl FAQ Which materials are best machined with this insert? The SNMG120404 AH6225 Tungaloy turning insert is optimised for rostfreier Stahl and performs well under the mixed conditions common to stainless alloys. What does the AH6225 grade mean in practice? AH6225 denotes a PVD-coated carbide grade tuned for a sharp yet stable cutting edge, offering a compromise between wear resistance and edge strength for medium machining. Is the insert reversible and indexable? Yes, the SNMG120404 form is double-sided and indexable, allowing both sides to be used before replacement and supporting cost-effective tool usage. How is holder compatibility determined? Compatibility for an ISO SNMG insert depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; adherence to ISO dimensions ensures straightforward integration. Which applications suit this insert? Typical uses include external and internal turning operations where reliable chip control and consistent surface quality are required under medium cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade for stainless steel, a 0.4 mm corner radius and reliable ISO compatibility to keep turning cycles consistent and reduce tool change frequency; order the insert directly via Metav Werkzeuge or ask their technical consultants for selection support. SNMG120404 AH6225 indexable turning insert by Tungaloy — ISO turning insert, 90° square form The SNMG120404 AH6225 is an ISO‑standard indexable insert for turning, engineered for medium‑duty machining of stainless steel with a sharp yet robust cutting edge. ISO SNMG geometry, 90° cutting angle PVD‑coated carbide grade AH6225 Double‑sided chipbreaker for stable machining 12 mm inscribed circle, 4.76 mm thickness Increase throughput with a stable, sharp cutting edge The PVD‑coated carbide grade AH6225 provides a balance between edge sharpness and durability, specifically tuned for stainless steel machining. This combination enables reproducible cutting results under varying conditions, which can translate into fewer tool changes and a steadier cycle time. The insert’s engineered cutting edge supports consistent surface quality while maintaining productivity during medium‑duty turning. Ensure predictable holder compatibility and secure clamping Designed to the ISO SNMG form, the insert aligns with standard indexable holder geometries; compatibility depends on form, relief angle, tolerance class, fastening, size and thickness. The square form with a cylindrical hole and a nominal 90° cutting angle allows straightforward seating in compatible external holders or boring bars. Clear dimensional parameters reduce setup uncertainty and aid faster tool mounting and repeatable clamping. Flexible grade and chip control for varying shop conditions The universal grade AH6225 is intended for diverse turning tasks on stainless steel, offering a compromise between edge resistance and cutting action. The double‑sided chipbreaker assists chip control in interrupted and continuous cuts, reducing the likelihood of built‑up edge and improving process stability. Selecting a matching chipbreaker and holder rigidity will maximise the grade’s advantage under changing process dynamics. Minimise downtime with durable indexable design The square, double‑sided construction provides additional indexing options to extend usable life per insert, while the PVD‑coating enhances wear resistance on the flank and rake faces. The combination of a modest 0.4 mm corner radius and a 4.76 mm thickness gives a stable cutting geometry that tolerates moderate vibration and supports repeatable part quality. Technical advisors can assist in matching the insert to the correct clamping set and replacement screw specification. Contact Metav Werkzeuge for tailored advice on selecting the Tungaloy SNMG120404 AH6225 insert and to arrange prompt delivery or compatibility checks Technical data Article number: 6826338 Manufacturer SKU: TUN6826338 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Core data Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Cutting angle: 90° Hole style: cylindrical Features and applications PVD‑coated carbide grade AH6225 Double‑sided chipbreaker ISO SNMG120404 form for turning operations Suitable for stainless steel machining Square insert with cylindrical hole FAQ What materials is this insert designed for? The SNMG120404 AH6225 Tungaloy insert is optimised for stainless steel and comparable alloys, with the AH6225 grade tuned for medium‑duty turning. How is holder compatibility determined? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; the SNMG120404 conforms to ISO SNMG geometry for straightforward matching. How many usable cutting edges does the insert offer? The double‑sided construction of the SNMG120404 AH6225 provides multiple indexable edges, extending service life and reducing the frequency of replacements. When is the 0.4 mm corner radius recommended? A 0.4 mm corner radius suits medium‑duty turning where a balance between edge strength and surface finish is required; it reduces the risk of chipping compared with very small radii. Does the PVD coating improve performance? Yes, the PVD‑coating on the AH6225 grade enhances wear resistance on contact faces and contributes to a more stable cutting edge under fluctuating conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of a robust combination of PVD-coated carbide and a 0.4 mm corner radius to ensure stable cutting performance in medium turning operations; the ISO SNMG120404 geometry and square format provide straightforward holder compatibility for efficient workshop workflows. Order through Metav Werkzeuge or consult the technical team for tailored advice. SNMG 120404 AH6225 indexable insert for turning — Tungaloy SNMG 120404 AH6225 is a square ISO indexable insert designed for a wide range of turning tasks, especially where reliable performance on rostfreier Stahl is required SNMG insert, ISO 120404 geometry PVD-coated carbide grade AH6225 0.4 mm corner radius for versatile finishes Double-sided chipbreaker, cylindrical hole Stable edge life and predictable machining results The combination of a PVD-coated carbide substrate and the AH6225 grade delivers a balance between wear resistance and a sharp cutting edge suitable for medium machining. The coating reduces adhesion and heat transfer, which supports consistent performance on rostfreier Stahl under varying cutting conditions. The square plate format with a 0.4 mm corner radius helps achieve repeatable surface finish without compromising tool life. For production-oriented shops this translates into fewer insert changes and improved process stability. Seamless fit in ISO-based turning systems Compatibility with a holder depends on form, relief angle, tolerance class, fastening and plate dimensions; the ISO designation makes selection straightforward. The insert’s square form, 4.76 mm plate thickness and cylindrical hole ensure secure clamping and straightforward indexing in standard SNMG-capable holders. The listed 90° lead angle offers a neutral cutting direction suitable for general external and internal turning, while the double-sided chipbreaker provides chip control in alternating cut conditions. This clarity in geometry eases setup and reduces downtime for tool changes. Practical benefits for workshop efficiency and quality Using a universal grade optimised for rostfreie Stähle helps minimise inventory complexity: one insert grade covers a broad material range, reducing changeovers and simplifying tool procurement. The combination of PVD coating and the AH6225 substrate offers a predictable wear pattern and reliable edge stability, which supports consistent component quality and surface finish. For operations requiring repeatability and concise process windows, this insert supports a cost-effective machining strategy without sacrificing performance. Contact Metav Werkzeuge for application guidance and to secure the Tungaloy SNMG 120404 AH6225 insert for reliable turning of rostfreier Stahl — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947316 SKU: 6947316-Tungaloy Manufacturer SKU: TUN6947316 Model series: ISO-Drehwendeschneidplatten Grade / Coating: AH6225, PVD-coated Material: Carbide Application: Turning Facts Plate designation: SNMG120404 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Lead angle: 90° Special features Square plate form Cylindrical hole for fastening Double-sided chipbreaker ISO-standard geometry for holder compatibility Universal grade for rostfreier Stahl Suitable for external and internal turning FAQ What materials is this insert suited for? The AH6225 grade in this SNMG120404 insert is formulated as a universal solution and is particularly recommended for machining rostfreier Stahl, with good performance in variable turning conditions. How does the PVD coating benefit machining? The PVD-coated carbide surface on the SNMG 120404 AH6225 reduces adhesion and improves heat resistance, promoting a more stable cutting edge and extended tool life in medium turning applications. Can this insert be used in standard SNMG holders? Yes. The ISO SNMG120404 geometry, square form and cylindrical hole make the insert compatible with SNMG-capable external holders and boring bars when the holder matches relief angle and tolerance class. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, ISO SNMG geometry and a 0.4 mm nose radius for consistent mid-range turning of stainless steels; order directly via Metav Werkzeuge or ask the consultants for application advice. SNMG 120404 AH6225 turning insert by Tungaloy – PVD-coated carbide, 0.4 mm radius SNMG120404 AH6225 Tungaloy turning insert for ISO-standard turning applications, designed for reliable performance on stainless steels and adaptable to a wide range of holders PVD-coated carbide for stainless steels ISO SNMG120404 geometry for compatibility Double-sided chipbreaker for versatile use 0.4 mm nose radius for stable cutting Consistent performance for stainless-steel turning The SNMG120404 AH6225 indexable insert is specified as a PVD-coated carbide grade engineered for turning of stainless steels. The grade delivers a sharp yet stable cutting edge, which is beneficial in mid-range machining and in changing workpiece or cutting conditions. This results in improved process reliability and more predictable tool life, helping to reduce downtime and maintain surface quality. The coating aids wear resistance while preserving edge integrity during intermittent or continuous cuts. Geometry and measures that enable secure mounting The insert follows the standard SNMG geometry with ISO code 120404, providing a recognised fit for compatible external holders and boring bars. Key dimensions include an inscribed size of 12 mm, a plate thickness of 4.76 mm, a nose radius of 0.4 mm and a 90° lead angle; the relief angle is 0°. Correct compatibility depends on the holder’s form, relief, tolerance class, fastening method, size and thickness, so matching these parameters ensures correct seating and stable cutting conditions. The cylindrical hole supports accurate clamping and repeatable positioning in ISO-compatible toolholders. Workshop advantages: handling, indexing and application scope The square plate form combined with a double-sided chipbreaker provides practical benefits at the machine: multiple indexing positions allow economical use of each insert and the chipbreaker supports controlled chip formation for improved surface finish. As an ISO-standard indexable plate, it is straightforward to replace and to source as part of a system comprising holder, support shim and clamping set. The universal character of the AH6225 grade makes it suitable as a go-to choice for turning tasks on stainless steels, offering a balance between edge sharpness and robustness for everyday workshop use while simplifying inventory management. Contact Metav Werkzeuge for availability, application recommendations or to request technical data for Tungaloy inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947272 Manufacturer SKU: TUN6947272 SKU: 6947272-Tungaloy Model series: ISO-Drehwendeschneidplatten Numbers / Facts Geometry: SNMG120404 (ISO 120404) Inscribed size: 12 mm Thickness: 4.76 mm Nose radius: 0.4 mm Lead angle: 90° Relief / clearance angle: 0° Special features / Versions Coating: PVD Material: carbide Grade / sort: AH6225 Chipbreaker: double-sided Plate form: square Hole: with cylindrical hole Application: turning FAQ What materials is this insert suited for? The AH6225 grade is a universal PVD-coated carbide developed primarily for stainless steels, providing a balance of edge sharpness and stability for varied turning tasks. What are the key dimensions to check for holder compatibility? Check the SNMG geometry (ISO 120404), inscribed size 12 mm, thickness 4.76 mm and nose radius 0.4 mm; the holder must match form, relief angle, tolerance class, fastening and plate thickness. Is the insert reversible or single-use per edge? The square plate with a double-sided chipbreaker offers multiple indexing positions, allowing several usable edges before replacement. How does the PVD coating affect performance? The PVD coating improves wear resistance while maintaining edge sharpness, supporting stable cutting during mid-range machining and under variable conditions. Does the insert require a specific clamping screw or shim? Compatibility is determined by the holder design and clamping system; the plate has a cylindrical hole for secure clamping in ISO-compatible toolholders. Can this insert be used for both external and internal turning? Yes; the SNMG form and AH6225 grade are suitable for external and internal turning when the correct holder and cutting parameters are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com