SNMA 120416 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, ISO SNMA geometry and a 1.6 mm corner radius for consistent high-speed turning of cast iron; the result is reliable cutting performance and predictable tool life. Order the SNMA120416 T5105 indexable insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. SNMA 120416 T5105 — Tungaloy turning insert for ISO turning The SNMA120416 T5105 is an ISO-indexed turning insert, designed for stable, high-speed machining of cast iron in external and internal turning operations. CVD-coated carbide grade T5105 for cast iron ISO SNMA geometry with 1.6 mm corner radius Square insert 12 mm, 4.76 mm thickness Cylindrical hole for secure clamping Reliable high-speed performance for cast iron machining The insert’s CVD-coated carbide composition delivers enhanced wear resistance, which is essential when machining abrasive cast iron at elevated cutting speeds. The CVD coating provides a hard, thermally stable surface that reduces flank wear and extends the interval between tool changes. As the geometry is ISO SNMA, predictable cutting behaviour is achieved when the insert is used in holders specified for this family; this leads to reduced process variation and improved component repeatability. Secure clamping and dimensional consistency reduce downtime Designed with a cylindrical hole and standard ISO dimensions, the insert ensures positive location and repeatable seating in compatible toolholders. The square form and specified 4.76 mm thickness combine to give rigidity under load, while the 1.6 mm corner radius helps distribute cutting forces for smoother transitions on interrupted cuts. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness, which simplifies selection and lowers the risk of incorrect mounting. Edge geometry and grade selection for stable cutting The 1.6 mm corner radius provides a balance between strength and surface finish: it supports higher feed rates and improves edge life under stable clamping conditions, yet offers acceptable finish quality. The insert is supplied without a chipbreaker, making it suitable for turning operations where chip control is managed by cutting parameters or downstream tool design. For operations requiring predefined chip control, select an alternative SNMA variant with an appropriate chipbreaker matching the workpiece and process stability. Practical benefits for production environments Using this insert in a well-matched holder and setup results in consistent cutting forces, predictable tool change intervals and reduced scrap rates. The CVD-coated grade T5105 is aimed at productive machining of cast iron under stable conditions, delivering a favourable combination of economy and performance. Its ISO conformity simplifies inventory management across machines that accept SNMA indexable inserts and supports efficient tool replacement during scheduled maintenance. Contact Metav Werkzeuge today to discuss integrating the Tungaloy T5105 grade into existing turning lines or to request an individual application recommendation; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6850272 Manufacturer SKU: TUN6850272 Our SKU: 6850272-Tungaloy Facts Shape: square Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Relief angle: 0° Included angle: 90° Special features Grade: T5105 (CVD-coated carbide) Hole: cylindrical hole Series: ISO turning inserts Application: turning, cast iron, high-speed machining FAQ Which materials is this insert best suited for? The SNMA120416 T5105 is optimised for machining cast iron; the CVD-coated carbide grade T5105 delivers wear resistance suited to higher cutting speeds in stable setups. What are the key dimensions to check for holder compatibility? Check square size 12 mm, thickness 4.76 mm, relief angle 0° and the SNMA form; these dimensions determine fit in an ISO-compatible holder for the SNMA family. Does the insert include a chipbreaker? This SNMA120416 variant is supplied without a chipbreaker; chip control should be managed via cutting parameters or by selecting an SNMA insert with an appropriate chipbreaker if required. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge strength and supports higher feeds with improved tool life under stable cutting conditions while maintaining acceptable surface finish. Is this insert suitable for internal and external turning? Yes, the ISO SNMA geometry and square form make the insert suitable for both external and internal turning when combined with the correct holder and tool setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120416 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO SNMA geometry, a CVD-coated T5115 carbide grade and a robust 1.6 mm corner radius to ensure stable chip control and consistent performance in turning operations. Order directly via Metav Werkzeuge or consult our specialists for matching holders and clamping sets. SNMA 120416 T5115 indexable insert for turning by Tungaloy — ISO SNMA geometry, CVD-coated carbide SNMA 120416 T5115 is an ISO-standardised turning insert designed for general external and internal turning, optimised for cast iron machining with a balance of wear resistance and edge stability. CVD-coated carbide grade T5115 ISO SNMA geometry with 90° cutting angle 1.6 mm corner radius for durable edges Compatible with external and internal turning Reliable cutting performance for cast iron components The SNMA120416 T5115 insert is built on a CVD-coated carbide substrate and the T5115 grade, which together provide a robust compromise between wear resistance and edge stability. For machining cast iron, this combination reduces flank wear and maintains surface quality over longer tool life. The CVD coating layer increases thermal resistance and reduces adhesion, which helps to manage built-up edge formation when turning demanding cast iron alloys. In practice, this means fewer tool changes and more consistent component quality during serial production. Consistent geometry for straightforward tool pairing The square ISO SNMA shape with a 90° cutting angle simplifies holder selection and setup, since compatibility is defined by form, relief angle, tolerance class, fastening, size and thickness. The insert’s 1.6 mm corner radius provides a stable cutting edge that tolerates slight variations in feed while delivering predictable chip formation. Where holder choice or clamping method is in doubt, matching an SNMA-compatible external holder or boring bar and the correct clamping kit is the pragmatic route to secure, repeatable turning results. Practical selection advice for efficient turning When choosing the correct insert grade and chipbreaker, the primary considerations are the workpiece material and the machining stability of the set-up. The T5115 grade is a universal solution for cast iron, so it suits mixed production runs where process reliability and straightforward tool management are priorities. For high-speed or unstable set-ups, operators should prefer more rigid tooling and conservative feeds to preserve the cutting edge. Clear labelling and ISO conformity make tool inventory management simpler and reduce the risk of mismatched components on the shop floor. Benefits that support productivity and process control Using an insert with standard geometry and a proven carbide grade provides measurable advantages: reduced downtime through longer life, improved reproducibility of component dimensions, and simplified logistics for insert replacements. The SNMA form factor allows rotational indexing of unused corners for cost-efficient use of the insert, while the cylindrical locating hole ensures reliable seating and consistent orientation in compatible holders. These design choices support a predictable production rhythm and help keep machining cycles lean. For tailored advice on selecting holders, clamping kits or compatible accessories for the Tungaloy SNMA120416 T5115 insert, contact Metav Werkzeuge and benefit from practical, application-focused guidance. Technical data Article number: 6850273-Tungaloy Manufacturer SKU: TUN6850273 Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade/coating: T5115 (CVD-coated carbide) WPL designation: SNMA120416 Shape: Square Facts Corner radius: 1.6 mm Plate size: 12 mm Thickness: 4.76 mm Cutting angle: 90° Relief (free) angle: 0° Hole: with hole Hole style: cylindrical hole Special features Universal grade for cast iron machining ISO-standardised SNMA geometry Compatible with SNMA holders and boring bars No chipbreaker supplied (plain insert) System requires insert, holder, backing/clamping set and replacement screws FAQ What materials is this insert suitable for? The SNMA120416 T5115 insert is primarily intended for cast iron machining; the CVD-coated T5115 grade offers an effective balance of wear resistance and edge stability for that material class. How does the SNMA geometry affect holder compatibility? Compatibility is determined by the insert form, relief angle, tolerance class, fastening, size and thickness; the ISO SNMA geometry and dimensions allow straightforward pairing with compatible external holders and boring bars. Is a chipbreaker included with this insert? This specific item is supplied without a chipbreaker; chip control should be managed by selecting the appropriate grade and optimising cutting parameters, or by choosing an insert variant with an integrated chipbreaker if required. How is the insert secured in the holder? The insert features a cylindrical locating hole and is secured using the holder’s clamping system and the appropriate screws; correct seating and torque are essential for stable machining performance. Can the insert be indexed to use all corners? Yes, the square SNMA format allows corner indexing to use multiple cutting edges, maximising the usable life of the insert under suitable operating conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMA 120416 T5125 Wendeplatten - Tungaloy
Combining a CVD-coated carbide T5125 with a robust square geometry and a 1.6 mm corner radius, this insert delivers productive turning of cast iron under interrupted cuts while maintaining stable edge life; order the SNMA120416 T5125 directly via Metav Werkzeuge or consult our specialists for application advice. SNMA 120416 T5125 — ISO indexable turning insert for turning (Tungaloy) The SNMA120416 T5125 is an ISO square indexable insert intended for external and internal turning, optimised for cast iron and engineered to withstand interrupted cuts. CVD-coated carbide grade T5125 Optimised for cast iron and interrupted cuts Square ISO insert SNMA120416, 90° cutting angle 1.6 mm corner radius for higher edge strength Predictable tool life through CVD-coated carbide technology The combination of CVD-coated carbide and the T5125 grade provides a tough, wear-resistant cutting edge that is particularly suited to cast-iron machining in less stable setups. The CVD layer enhances thermal and abrasion resistance, which translates into longer tool life and fewer insert changes on the production line. In practice, this means reduced downtime and more consistent component quality when matched with appropriate cutting data and coolant strategy. Straightforward integration into ISO tool systems The insert is supplied in the standard ISO format, simplifying integration into existing toolholders. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness; the system typically comprises the indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. This standardised approach enables predictable setup times and easier stock management for the workshop. Geometry optimised for process security in interrupted cuts A square geometry with a 90° cutting angle and a 1.6 mm corner radius provides a robust edge capable of absorbing shock loads from interrupted cuts. The insert’s 0° clearance angle is specified as part of its form and influences contact conditions at the tool tip; the result is improved stability and repeatable performance in demanding turning operations. Selecting the correct feed and cutting speed will further increase edge life and dimensional consistency. Practical advantages for workshop efficiency As an indexable solution, this plate reduces consumable costs and simplifies maintenance: only the insert requires replacement, not the entire tool body. The absence of an integrated chipbreaker on this variant allows flexibility to pair the insert with holder-mounted chip control elements or to adapt cutting parameters as required. For batch runs and mixed production, the ISO format and the CVD-coated carbide T5125 grade help to keep inventory lean while supporting productive machining cycles. For application-specific cutting data, availability enquiries or to reserve SNMA120416 T5125 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and prompt service. Technical data Article number: 6850274 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Designation: SNMA120416 T5125 Material: Carbide Manufacturer SKU: TUN6850274 Data Corner radius: 1.6 mm Cutting angle: 90° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 12 Special features CVD coating Grade T5125 (tough, for cast iron) Square plate (SNMA form) No chipbreaker (without) Cylindrical hole for secure fastening Intended application: turning Designed for interrupted cuts and less stable conditions FAQ Which materials is this insert best suited for? The SNMA120416 T5125 is primarily designed for cast iron, especially where interrupted cutting or less rigid setups occur; selection for other materials should be made according to available grades and cutting data. How is compatibility with toolholders ensured? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the SNMA form and ISO dimensions permit use with standard ISO external holders and boring bars. Does this insert include a chipbreaker? This variant is supplied without a chipbreaker, enabling flexibility to pair the insert with holder-based chip control or to adjust cutting parameters for the specific process. What are the key geometry specifications? The insert features a 1.6 mm corner radius, a 90° cutting angle and a plate thickness of 4.76 mm, offering a robust edge for demanding turning tasks. How is the insert used within a complete tool system? A typical system comprises the ISO insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws; this enables secure mounting and quick insert changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of the ISO‑standard geometry, the NS9530 cermet finishing grade and the precise 0.4 mm corner radius for consistently high surface quality and low cutting forces. Order the SNMG090304‑TM NS9530 insert directly via Metav Werkzeuge or consult our specialists for application guidance. SNMG090304‑TM NS9530 Tungaloy turning insert (ISO, uncoated cermet, finishing) The SNMG090304‑TM NS9530 is an ISO‑standard square insert engineered for finishing operations in turning, optimised for external and internal steel applications. ISO‑standard geometry, compatible with ISO holders Uncoated cermet for exceptional surface finish Sharp cutting edge for low cutting forces Achieve superior surface quality with a dedicated finishing grade The NS9530 grade is an uncoated cermet developed for finishing passes on steel, offering a sharp cutting edge and low cutting forces that reduce vibration and improve part finish. Because the substrate combines ceramic and metallic phases, this insert delivers a fine, consistent workpiece surface even at smaller depths of cut and during continuous cutting. Engineers benefit from fewer secondary operations and shorter cycle times when the cutting data matches the grade’s intended use. Straightforward selection through ISO compatibility and clear geometry The SNMG form follows ISO conventions, so compatibility with a holder is determined by insert shape, relief angle, tolerance class, fastening method, size and thickness. The relief angle of 0° and the square format provide predictable seating and repeatable positioning. Understanding these parameters simplifies tool selection: match the insert’s geometry to the clamping system and machining strategy to ensure secure fixation and consistent cutting performance. System setup and application advice for reliable turning This insert is suited to external turning and internal turning where a finishing cut is required. Select a TM chipbreaker and a holder with appropriate rigidity to maintain the sharp edge and exploit the low cutting forces. A typical system comprises the insert, a suitable holder, a shim or clamping set and replacement screws; correct assembly preserves the intended cutting angle and avoids premature edge damage. Using a proper holder and minimal overhang will enhance stability and repeatability. Small radii and defined geometry for precise component tolerances The 0.4 mm corner radius combined with the insert’s square format enables controlled corner rounding and fine tolerance achievement on external profiles. The 90° approach angle gives versatility for facing and profiling tasks while the cylindrical mounting hole secures positive locating in the pocket. For finishing tasks that demand a high surface standard, this geometry reduces the need for polishing and supports efficient downstream processing. Contact Metav Werkzeuge to evaluate the SNMG090304‑TM NS9530 for your turning application and arrange supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998188 Manufacturer SKU: TUN6998188 SKU: 6998188‑Tungaloy Brand: Tungaloy Numbers / Core Technical Data Insert size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 0° Approach angle: 90° Hole: cylindrical Special features Grade: NS9530 Substrate: uncoated cermet Chipbreaker: TM Shape: square (SNMG) Application: turning Model series: ISO turning inserts System components: insert, holder, shim/clamping set, replacement screws FAQ What materials is this insert designed to machine? The SNMG090304‑TM NS9530 is designed primarily for machining steel and is optimised as a finishing grade for continuous cuts and small depths of cut. How does the NS9530 grade affect surface finish? The NS9530 uncoated cermet combines a sharp cutting edge with low cutting forces, which reduces built‑up edge and produces a superior surface finish on turned components. Which chipbreaker should be used with this insert? The TM chipbreaker is specified for this insert; it complements the NS9530 grade for controlled chip formation during finishing operations. How is compatibility with a toolholder determined? Compatibility depends on the insert’s ISO form, relief angle, tolerance class, fastening style, size and thickness; ensuring these match the holder guarantees correct seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090304 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and the ISO SNMG090304 geometry for stable, high-productivity turning of medium steels; order the SNMG090304-TM T9215 Tungaloy turning insert directly via Metav Werkzeuge or contact our advisors for specification support. SNMG090304-TM T9215 SNMG 090304 Tungaloy – Turning insert with TM chipbreaker SNMG090304-TM T9215 Tungaloy is an ISO‑standard indexable turning insert designed for productive external and internal turning of medium steels. CVD-coated carbide grade T9215 ISO SNMG090304 geometry, square insert Optimised TM chipbreaker for medium steel Cylindrical centre hole for secure clamping Higher productivity through wear resistance and toughness The combination of a CVD-coated carbide substrate and the T9215 grade delivers a balanced performance aimed at sustained production. The coating increases wear resistance, while the substrate provides fracture toughness, which together enable higher cutting speeds and longer tool life under continuous or lightly interrupted cuts. This results in fewer insert changes and improved cycle times when machining medium‑hard steel grades, making the insert a cost‑effective choice for repetitive turning operations. Reliable seat and geometry for consistent clamping and accuracy The ISO SNMG090304 geometry offers a square plate with a 90° included angle, a corner radius of 0.4 mm and a plate thickness of 3.18 mm, which together ensure dimensional stability and predictable engagement with the workpiece. The cylindrical centre hole and matching fixation features support secure clamping in standard external holders or boring bars. Compatibility with holders depends on form, clearance angle, tolerance class, fixing method, size and thickness; correct holder selection preserves insert performance and repeatability across batches. Process benefits and application focus for turning medium steels Equipped with the TM chipbreaker, the insert produces controlled chip formation suited to medium‑range steel turning. This reduces the risk of long, stringy chips and improves surface finish in both external and internal turning. The combination of geometry and grade means the insert is particularly effective in continuous operations and in light interruptions, where stable edge behaviour and consistent wear patterns are essential for predictable process windows and reduced rework. Selection guidance and operational notes The insert is part of a system comprising the ISO turning insert, an appropriate external holder or boring bar, a locating pad or clamp set, and replacement screws. For best results, match the chipbreaker and grade to the specific steel alloy, cutting conditions and machine rigidity. For customers seeking precise recommendations on feed and speed for particular materials, additional cutting data can be provided to optimise cycle time and tool life without compromising surface integrity. Contact Metav Werkzeuge for tailored tooling recommendations on the Tungaloy T9215 grade and assistance with holder compatibility; reach Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert consultation Technical Data Article number: 6772289 Manufacturer SKU: TUN6772289 Model series: ISO‑Drehwendeschneidplatten Designation: SNMG090304-TM Facts Thickness: 3.18 mm Corner radius: 0.4 mm Included angle: 90° Relief angle: 0° Size: 09 Special features Material: CVD‑coated carbide (T9215) Chipbreaker: TM Plate form: square Hole: cylindrical centre hole Intended application: turning of medium steel System notes: ISO insert compatible with appropriate holder, locating pad and screws FAQ What materials is this insert intended for? The SNMG090304-TM T9215 Tungaloy insert is specified for medium steel machining; the T9215 grade combines wear resistance and fracture toughness for productive steel turning. Is the insert compatible with standard ISO toolholders? Yes, the SNMG090304-TM geometry follows ISO standards; compatibility requires matching form, clearance angle, tolerance class, fixing method, size and thickness with the chosen holder. How does the TM chipbreaker affect machining? The TM chipbreaker on this Tungaloy insert promotes controlled chip formation and improved surface finish during continuous or lightly interrupted turning operations on steel. What are the key dimensions to check when selecting a holder? Important dimensions include plate thickness (3.18 mm), corner radius (0.4 mm), included angle (90°) and the presence of a cylindrical centre hole for clamping. Can this insert be used for internal as well as external turning? Yes, the insert design and TM chipbreaker make it suitable for both external and internal turning when used with appropriate external holders or boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 090304 T9215 Wendeplatten - Tungaloy
The combination of CVD‑coated carbide (T9215) and a 0.4 mm corner radius delivers a durable cutting edge with reliable fracture resistance for medium steel turning; the ISO‑compatible SNMG090304‑TM insert also features a 0° clearance angle for stable cutting conditions. Order the insert directly via Metav Werkzeuge or request selection support from their consultants. SNMG 090304 T9215 – ISO indexable turning insert SNMG090304‑TM by Tungaloy for turning The SNMG090304‑TM T9215 is an ISO‑standard indexable insert designed for external and internal turning operations, combining a CVD‑coated carbide grade with a TM chipbreaker for productive medium‑steel machining. CVD‑coated carbide for high wear resistance 0.4 mm corner radius for precise contours 0° clearance angle for stable cutting Compatible with ISO SNMG toolholders High productivity through optimised grade and coating The insert is manufactured in a CVD‑coated carbide grade T9215, a combination engineered to balance wear resistance and fracture toughness for continuous to slightly interrupted cuts in medium‑strength steels. This material and coating choice reduces flank wear and extends effective tool life, which in turn contributes to fewer insert changes and higher net productivity on serial turning operations. The TM chipbreaker is matched to general turning tasks and supports consistent chip control under typical cutting parameters. Geometry that delivers predictable accuracy and surface finish A defined 0.4 mm corner radius and a 0° clearance angle create secure seating and predictable engagement in the cut, leading to repeatable dimensions and improved surface integrity on turned components. The square plate format and the included cylindrical hole ensure reliable mechanical clamping in standard SNMG holders; the robust geometry supports stable cutting even where light interruptions occur. Together, these features help maintain process stability and reduce finish‑related rework. Practical compatibility and application guidance for workshop integration The insert follows ISO standards for SNMG indexable inserts and is compatible with matching SNMG toolholders where form, clearance angle, tolerance class, attachment method, size and thickness correspond. The system concept for use comprises the ISO insert, a suitable external holder or boring bar, a support shim/clamping set and replacement screws. This standardised approach simplifies inventory and enables rapid changeover in mixed production environments. Assistance for selecting the correct chipbreaker and matching holder is available from Metav Werkzeuge for process optimisation. Application focus and benefits for medium steel turning Engineered specifically as a first choice for medium steel machining, the grade provides a balance between long tool life and resistance to chipping, enabling higher sustained cutting rates compared with uncoated or less robust grades. The insert’s design supports external and internal turning tasks where reliable dimensional control and consistent productivity are priorities. Implementation typically yields improvements in cycle time and a reduction in unscheduled tool changes, contributing to lower overall machining costs per component. For efficient medium‑steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6773876 Manufacturer SKU: TUN6773876 SKU: 6773876-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMG090304-TM T9215 Core specifications Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 09 Included angle: 90° Clearance angle: 0° Features and materials Material: carbide (cemented carbide) Coating/grade: CVD-coated carbide, T9215 Plate form: square Hole: with cylindrical hole Chipbreaker: TM Typical use: external and internal turning Compatibility: ISO SNMG holders (form, clearance, tolerance, attachment, size, thickness) FAQ What materials is this insert best suited for? The SNMG090304‑TM in grade T9215 is optimised for medium‑strength steel machining; the CVD coating and carbide substrate provide wear resistance and fracture safety for typical steel turning tasks. Which chipbreaker is fitted and what is its effect? The insert uses the TM chipbreaker, designed to support controlled chip formation in continuous to slightly interrupted cuts, improving chip evacuation and contributing to consistent surface finish. How does the 0° clearance angle influence performance? A 0° clearance angle promotes stable cutting engagement and even support under the insert shoulder, which helps reduce vibration and improves dimensional repeatability when used in correctly matched holders. Is the insert compatible with standard SNMG toolholders? Yes; the ISO SNMG designation and square plate form mean compatibility with SNMG holders provided that form, clearance angle, tolerance class, attachment method, size and thickness are matched. What identifiers should be used when ordering spare inserts? Order using the manufacturer article number 6773876 or the SKU 6773876‑Tungaloy and specify SNMG090304‑TM T9215 for clarity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090304 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide and a robust universal T9225 grade for dependable medium–heavy steel turning; the ISO conformity and secure clamping reduce tool changes and support continuous production. Order the insert directly via Metav Werkzeuge or consult their technical team for application-specific advice. SNMG090304-TM T9225 indexable insert (ISO 090304) for turning — Tungaloy SNMG090304-TM T9225 is an ISO-standard indexable insert designed for external and internal turning, optimised for medium–heavy steel machining where toughness and reliable chip control are required. ISO SNMG090304 indexable insert T9225 CVD-coated carbide for durable cutting Robust universal grade for medium–heavy steel 0° relief angle; cylindrical hole for secure clamping Reliable cutting performance for medium–heavy steel The CVD-coated carbide in grade T9225 delivers a balanced combination of wear resistance and toughness, making it well suited to medium–heavy steel applications where cutting conditions may vary or include slight interruptions. The coating improves edge life under elevated temperatures, while the substrate provides the fracture resistance needed for interrupted cuts. This results in fewer insert changes, steady cycle times and predictable component quality — measurable advantages in production environments that demand uptime and consistent throughput. Designed for secure clamping and compatibility As an ISO-standard insert with the SNMG geometry, compatibility with a turning holder depends on form, relief angle, tolerance class, fastening method, size and thickness. The 0° relief angle and cylindrical hole ensure a neutral seating and reliable clamp engagement, which is particularly beneficial when machining with varying engagement or when using heavier cuts. Clear reference to these parameters enables straightforward verification of fitment and helps avoid incorrect pairing that can lead to chatter or premature wear. Geometry and chip control for consistent surfaces The chipbreaker TM combined with a corner radius 0.4 mm and 3.18 mm thickness offers controlled chip formation and a stable cutting edge for repeatable surfaces. The 90° included angle contributes to predictable cutting forces and makes this insert suitable for both roughing and finishing passes when stability is adequate. Explaining such geometry in plain terms: a small corner radius provides a fine edge for improved finish, while the chipbreaker’s form clears material efficiently to prevent re-cutting and thermal concentration. Practical system considerations and productivity gains This indexable insert is part of a simple system comprising the insert, a matching holder or boring bar, and the appropriate shim/clamp set with replacement screws. Selecting the robust universal grade and the correct chipbreaker for the workpiece material reduces tool inventory and simplifies set-up routines. For production planners, the predictable behaviour of the insert under common steel conditions aids in programming feeds and speeds and in planning preventive maintenance intervals, which together enhance overall equipment effectiveness. For reliable medium–heavy steel turning choose the Tungaloy T9225 grade — contact Metav Werkzeuge for technical selection assistance and fast availability. Technical Data Article number: 6780871 SKU: 6780871-Tungaloy Manufacturer SKU: TUN6780871 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: 090304 Plate size: 09 Corner radius: 0.4 mm Plate thickness: 3.18 mm Relief angle: 0° Included angle: 90° Special features Grade/coating: T9225 (CVD-coated carbide) Chipbreaker: TM Plate form: square Hole style: cylindrical hole Application: Turning System components: matching holder, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The SNMG090304-TM in T9225 is engineered for medium–heavy steel machining, offering toughness for slightly interrupted cuts and stable performance across a broad range of steel grades. How is compatibility with a turning holder determined? Compatibility is ensured by matching the insert’s form, relief angle, tolerance class, fastening method, plate size and thickness; the SNMG090304-TM’s 0° relief angle and cylindrical hole support secure clamping in suitable holders. What does the T9225 grade indicate? The T9225 grade denotes a CVD-coated carbide developed for robust universal use in steel; it provides a compromise between wear resistance and edge toughness for reliable tool life under mixed cutting conditions. When is the TM chipbreaker recommended? The chipbreaker TM is recommended for general steel turning, particularly where chip control and occasional interrupted cuts are factors; it promotes consistent chips and reduces the risk of built-up edge. Can this insert be used for both external and internal turning? Yes, the geometry and 90° included angle of the SNMG090304-TM make it suitable for both external and internal turning operations when paired with the appropriate holder and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090304 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the ISO SNMG form to secure consistent performance in medium-to-heavy steel turning; the robust T9225 grade offers improved toughness under variable cutting conditions. Order directly via Metav Werkzeuge or request advice from our technical consultants for precise holder compatibility. SNMG 090304 T9225 — Tungaloy SNMG090304-TM indexable turning insert, CVD-coated carbide, 0.4 mm radius A SNMG090304-TM T9225 indexable turning insert designed for reliable external and internal turning in steel, offering a 90° geometry and a universal chipbreaker for mixed-cutting conditions CVD-coated carbide grade T9225 Robust universal grade for steel machining 0.4 mm corner radius for versatile profiling ISO-standard SNMG insert, 90° geometry Increase process reliability with a tougher grade The combination of CVD-coated surface and carbide substrate in this insert ensures extended edge life under intermittent cuts and changing engagement. The T9225 grade is formulated for medium-to-heavy steel machining and balances wear resistance with toughness; this reduces unscheduled tool changes and supports more consistent cycle times. The 90° geometry gives predictable toolpath behaviour, while the 0.4 mm corner radius contributes to edge strength and dimensional stability on shoulders and external profiles. Better chip control and surface finish where it matters The TM chipbreaker is optimised for a broad range of feeds and depths of cut, producing manageable chips and reducing the risk of surface damage. CVD coating acts as a thermal and wear barrier, which helps maintain cutting-edge integrity at elevated temperatures common in steel turning. For operators and process planners, this translates into improved surface quality and fewer rework cycles, especially when facing variable material batches or interrupted cuts. Clear compatibility and secure clamping for seamless integration This insert follows ISO standards for indexable turning plates, which simplifies holder selection; compatibility depends on form, clearance angle, tolerance class, mounting style, size and thickness. The item features a cylindrical hole for positive locating and secure fastening, and a square plate form that suits standard SNMG external holders. When selecting a cutterbody, match the insert's 090304 designation, thickness and hole type to ensure correct clamping and axial clearance in the tool assembly. Practical choices for shop-floor implementation For everyday use, pair this plate with a suitable external holder or boring bar and keep replacement screws and clamping pads to hand to minimise downtime. The universal nature of the T9225 grade reduces the need for multiple specialised grades across mixed-production runs. If uncertainty remains over holder compatibility or process parameters, Metav Werkzeuge’s technical team can advise on the correct insert–holder pairing and recommended feeds and speeds for specific steels. Contact Metav Werkzeuge for tailored advice and ordering on the SNMG090304-TM T9225 insert; technical consultants are available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Manufacturer article number: 6780780 SKU: 6780780-Tungaloy Manufacturer SKU: TUN6780780 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core measurements ISO code: 090304 Plate size: 09 Plate thickness: 3.18 mm Corner radius: 0.4 mm Geometry angle: 90° Clearance angle: 0° Special features Grade/coating: T9225, CVD-coated carbide Chipbreaker: TM ISO designation: SNMG090304-TM Plate form: square Hole: with cylindrical hole Typical application: turning (external and internal) Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert suited for? The SNMG090304-TM T9225 insert is formulated mainly for steel and performs well in medium-to-heavy machining tasks where toughness is required. How does the T9225 grade affect tool life? The T9225 grade combines toughness and wear resistance; this reduces chipping under interrupted cuts and extends usable edge life in demanding steel turning. What does the TM chipbreaker deliver in practice? The TM chipbreaker provides reliable chip control across a wide range of feeds, helping to avoid long stringy chips and to protect surface finish during external and internal turning. Is special clamping hardware required for this insert? No special hardware is mandatory, but correct matching of holder geometry, tolerance class and the insert’s cylindrical hole is essential for secure clamping and repeatable results. Can this plate be used for finishing and roughing operations? Yes; the universal nature of the T9225 grade allows a single plate to cover both roughing and finishing in many steel applications, depending on chosen feeds and depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090304 T9235 Wendeplatten - Tungaloy
Combine the toughness of a CVD‑coated carbide T9235 with the ISO SNMG090304 geometry and a 0.4 mm nose radius for improved performance in unstable or interrupted steel turning; order the insert directly via Metav Werkzeuge or consult the technical team for application support. SNMG090304-TM T9235 Tungaloy — ISO turning indexable insert (square, 90°) SNMG090304-TM T9235 Tungaloy is an ISO‑standard indexable turning insert designed for general steel turning, offering a CVD‑coated carbide grade and a TM chipbreaker for interrupted or unstable cuts CVD‑coated carbide grade T9235 Optimised for steel turning applications 0.4 mm nose radius for refined profiles ISO SNMG090304 format with cylindrical hole Consistent cutting performance under unstable conditions The CVD‑coated carbide grade T9235 is formulated for toughness rather than maximum speed, which reduces the risk of chipping and breakage when machining steel under variable conditions. In practice, this means more reliable tool life during operations with interrupted cuts or when machine rigidity is limited. By choosing a tougher grade and a purpose‑matched chipbreaker, the tool sustains cutting forces and maintains a stable cutting edge, delivering predictable component quality and fewer unplanned tool changes. Simple integration with ISO toolholders and robust clamping The SNMG geometry is an ISO‑standard square insert with a cylindrical hole, which ensures compatibility with a wide range of commercial turning holders when the form, clearance angle, tolerance class, mounting, size and thickness match. The insert’s 0° clearance and 3.18 mm plate thickness support secure seating; the 90° lead angle allows efficient shoulder and external turning. Knowing these parameters helps to select the correct holder and clamping set quickly, reducing setup time and simplifying inventory management for production environments. Cost‑effective productivity and selection guidance The TM chipbreaker paired with the T9235 grade is intended for general‑purpose steel turning at lower cutting speeds, offering a balance between surface finish and tool life. For many workshops, this insert reduces scrap and downtime thanks to its predictable wear behaviour and stable chip control. When specifying tooling, match the chipbreaker and grade to the workpiece material, machining stability and desired surface finish. For tailored recommendations, rely on technical consultation to determine optimum feed and speed values for each component family. Contact Metav Werkzeuge for application recommendations or to request availability of the SNMG090304‑TM T9235 insert from Tungaloy; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785989 Manufacturer SKU: TUN6785989 SKU: 6785989-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Carbide Full designation: SNMG090304-TM T9235 Tungaloy‑Wendeplatte Facts Nose radius: 0.4 mm Clearance angle: 0° Plate thickness: 3.18 mm Insert size: 09 Angle: 90° ISO code: 090304 Special features CVD‑coated carbide grade T9235 TM chipbreaker for steel turning Square insert form With cylindrical hole Suitable for external and internal turning Designed for unstable conditions and interrupted cuts System components: insert + compatible holder + shim/clamp + replacement screws FAQ What materials is this insert best suited for? The SNMG090304‑TM with T9235 grade is optimised for machining steel, particularly where lower cutting speeds, interrupted cuts or unstable setups are encountered. How does the TM chipbreaker influence performance? The TM chipbreaker promotes controlled chip formation in steel turning; in combination with the T9235 grade the insert provides reliable chip control and reduced edge chipping. Which holder type is required for mounting this insert? An ISO‑compatible turning holder sized for SNMG inserts and matched for form, clearance angle, tolerance, mounting and thickness is required to secure the SNMG090304‑TM correctly. Can the SNMG090304‑TM be used for finishing passes? Yes; when set with appropriate feeds and cutting speeds the combination of 0.4 mm nose radius and the T9235 grade can achieve satisfactory surface finishes on many steel components. What is the manufacturer article number and identification? The Tungaloy indexable insert is listed as article number 6785989 and has the SKU 6785989‑Tungaloy; the manufacturer SKU is TUN6785989. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 090304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces from the uncoated TH10 grade, the 0° relief angle for delicate finishes, and the secure clamping provided by the cylindrical hole for consistent turning results; order directly via Metav Werkzeuge or consult the team for specification support. SNMG 090304 TH10 – indexable turning insert for Turning by Tungaloy SNMG090304-TM TH10 Tungaloy indexable insert for ISO‑standard turning applications; optimized for non‑ferrous work and operations requiring low cutting forces and clean surface finishes. Uncoated carbide grade TH10 Square 09 form, 3.18 mm thickness 0° relief angle for low cutting forces Cylindrical hole for secure clamping Consistent surface quality with an uncoated carbide grade The uncoated carbide TH10 offers a sharp, low‑friction cutting edge that reduces cutting forces and helps produce clean finishes on non‑ferrous materials and delicate components. By avoiding an additional coating the edge achieves a lower shear resistance, which is particularly beneficial when turning aluminium, copper alloys or soft, gummy materials. This results in improved dimensional stability during short, interrupted cuts and in applications where minimising built‑up edge is crucial. The benefit is not only better surface integrity but also simpler edge control during regrinds. ISO compatibility and secure clamping for stable turning Designed as an ISO‑standard SNMG090304‑TM insert, the geometry matches common external holders and boring bars when considering form, relief angle, tolerance class, clamping method, size and plate thickness. The cylindrical hole ensures reliable seating and repeatable orientation; the square 09 format and the 3.18 mm plate thickness contribute to robust support in the pocket. The 0° relief angle and the 0.4 mm corner radius provide a balance between strength and edge sharpness, enabling controlled chip formation with the TM chipbreaker and predictable tool life in stable setups. Practical application and process guidance for production shops For efficient process planning select the TM chipbreaker and TH10 grade to match material, cut parameters and machine rigidity; the chipbreaker is designed to promote short, controllable chips while the uncoated cutting edge maintains low cutting forces. Integration into a tooling system typically involves pairing the insert with the appropriate external holder, backing shim and replacement screws. For workshops aiming to increase throughput on non‑ferrous turning tasks, this insert supports repeatable set‑ups and reduces the need for frequent parameter tuning, helping to keep cycle times steady and quality consistent. For tailored advice on the SNMG090304‑TM TH10 Tungaloy indexable insert or to source compatible holders and accessories contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806639 SKU: 6806639-Tungaloy Manufacturer item no.: TUN6806639 Facts Size: 09 Thickness: 3.18 mm Corner radius: 0.4 mm Included angle: 90° Relief angle: 0° Special features Carbide (Hartmetall) Uncoated grade TH10 Chipbreaker: TM ISO insert SNMG090304-TM Cylindrical hole (with hole) Square plate form Application: Turning FAQ What materials is this insert best suited for? The SNMG090304‑TM TH10 insert is optimised for non‑ferrous materials and work that benefits from a sharp, uncoated cutting edge, delivering low cutting forces and improved surface finish. How does the TM chipbreaker affect chip control? The TM chipbreaker on the SNMG090304‑TM promotes short, controllable chips suitable for turning operations, improving machine safety and reducing handling needs. Is this insert compatible with standard SNMG holders? Yes, the SNMG090304‑TM conforms to ISO dimensions; compatibility depends on holder form, clamping style, tolerance class and pocket thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090308 NS9530 TM Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing and reliable wear resistance offered by the NS9530 cermet grade together with the TM chipbreaker for consistent chip control; order the insert directly via Metav Werkzeuge or contact the technical consultants for application advice. SNMG 090308 NS9530 – Tungaloy indexable turning insert (ISO 090308) for turning The SNMG090308-TM NS9530 is an ISO-standard indexable turning insert designed for finishing operations on steel, delivering a sharp cutting edge and low cutting forces. ISO‑standard square insert, 90° cutting geometry Uncoated cermet NS9530 for high surface finish TM chipbreaker, suited to continuous cuts Precision finishing for external and internal turning The SNMG090308-TM from Tungaloy is engineered as a finishing grade for steel, optimised for continuous cuts and small depths of cut to deliver a superior surface finish. The uncoated cermet substrate NS9530 provides a sharp, wear-resistant cutting edge that reduces friction and cutting forces, which in turn helps to minimise tool vibration and improves dimensional consistency. Compatibility with the clamping system is ensured by standardised form, clearance angle, tolerance class, fastening method, size and thickness, so the insert integrates smoothly into existing turning tool systems. Key geometry and material benefits explained This indexable insert is a square 09 format with a 90° included angle, a 0.8 mm corner radius and a plate thickness of 3.18 mm; the insert is supplied with a cylindrical hole and a 0° clearance angle, forming a robust seating for positive clamping. The NS9530 cermet grade is uncoated and intended specifically for finishing: it combines edge sharpness with thermal stability to maintain profile accuracy during fine feeds. The TM chipbreaker geometry promotes controlled chip formation for steady evacuation in continuous turning, reducing the risk of built-up edge and improving process repeatability. Production gains and recommended application scope In precision turning operations the insert contributes to higher throughput by shortening post-process finishing and limiting rework, thanks to consistent surface quality and stable wear behaviour. The combination of low cutting forces and effective chip control often permits more predictable cycle times on automated lathes and turning centres. The insert is suitable for both external and internal turning tasks where fine surface integrity is required; selection of the correct holder and clamp set is advised to match the insert form, tolerance class and thickness for optimal performance. Shops focused on finishing, high repeatability and long tool life will find the combination of geometry and NS9530 material advantageous. Contact Metav Werkzeuge for precise application guidance or to request detailed machining parameters for this Tungaloy SNMG090308-TM NS9530 indexable turning insert Technical Data Article number: 6998189 Manufacturer item no.: 6998189 SKU: 6998189-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: NS9530 Numbers / Core Technical Data ISO designation: 090308 Insert size: 09 Insert thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Hole: with hole (cylindrical) Special features / Design Uncoated cermet cutting material TM chipbreaker Square plate form Compatible with ISO-standard holders Intended application: Drehen (turning) Suitable for finishing steel and continuous cutting FAQ What applications is this insert best suited for? The SNMG090308-TM NS9530 insert is intended primarily for finishing operations in turning, suitable for both external and internal turning of steel where fine surface quality and low cutting forces are required. How does the NS9530 cermet grade affect performance? The NS9530 cermet offers a sharp, wear-resistant edge that reduces cutting forces and thermal softening, enabling consistent surface finish and prolonged edge life in finishing cuts. Which chipbreaker is fitted and what is its benefit? This insert features the TM chipbreaker, which is designed for controlled chip formation during continuous cuts, improving chip evacuation and process reliability. What must be considered when selecting a holder for this insert? Holder selection must match the insert form, clearance angle, tolerance class, fastening method, size and thickness to ensure correct seating and clamping for stable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090308 T9215 TM Tungaloy Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade and ISO SNMG geometry for consistent productivity and wear resistance; the T9215 grade delivers robust performance in continuous to slightly interrupted turning operations. Order the insert directly via Metav Werkzeuge or ask the consultants if application advice is required. SNMG090308-TM T9215 Tungaloy indexable insert — CVD-coated carbide, 0.8 mm corner radius The SNMG090308-TM is a square ISO turning indexable insert designed for medium steel machining, offering a balance of wear resistance and fracture protection in production environments SNMG090308 format for ISO holders CVD-coated carbide grade T9215 0.8 mm corner radius for versatility Cylindrical hole for secure clamping Reliable performance for medium-steel turning The insert combines a CVD-coated carbide substrate with the T9215 grade to provide high wear resistance while maintaining fracture toughness. This composition is especially suitable for continuous cutting and light interruptions typical in production turning of medium-strength steel. The result is predictable tool life and fewer indexings, which supports steady cycle times on lathes and turning centres. Where tool life and consistent surface finish are priorities, this geometry and grade reduce unplanned downtimes and contribute to overall process stability. Geometry and holder compatibility that simplify set-up The square SNMG090308 geometry with a 90° included angle and a 0.8 mm corner radius offers versatile edge options for finishing and light-medium roughing. A 0° clearance angle and a cylindrical hole ensure secure clamping in compatible ISO external holders and boring bars. Compatibility with a specific holder is determined by form, clearance, tolerance class, attachment method, size and thickness; matching these parameters avoids runout and ensures repeatable accuracy. For retrofit or new tool assemblies, select a holder specified for SNMG inserts and the corresponding tolerance class. Stable chip control and productivity advantages The TM chipbreaker is tuned for chip shaping in medium-stiffness steel, promoting efficient evacuation and reduced cutting forces. As a result, the TM chipbreaker improves chip control and supports higher feed rates without compromising finish. The combination of grade and chip geometry targets operators and production managers seeking improved throughput: fewer insert changes, more predictable edge wear and an overall uplift in productivity. For interrupted cuts or unstable set-ups, choose a matching chipbreaker and adapt cutting data to preserve the edge integrity. Practical benefits for workshop logistics and process planning As an indexable insert, the component simplifies stock management: fewer regrinds, easy replacement and consistent machining results across shifts. The square form and secure hole clamping enable quick index changes and reproducible seating, contributing to reduced set-up times. Metav Werkzeuge can supply the insert and advise on suitable holders and cutting parameters to match machine rigidity and material batch variation. For production-focused operations, the blend of economy and stability makes this insert a pragmatic choice for medium-range steel turning. Contact Metav Werkzeuge for supply and application guidance on the Tungaloy SNMG090308-TM T9215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772290 SKU: 6772290-Tungaloy Manufacturer SKU: TUN6772290 Model series: ISO turning indexable inserts ISO designation: SNMG090308-TM Facts Size: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Special features Grade: T9215 Coating: CVD Material: carbide Chipbreaker: TM Hole style: cylindrical hole Shape: square Application: turning (external and internal) FAQ What materials is this insert suitable for? The SNMG090308-TM T9215 Tungaloy indexable insert is specified for medium steel machining; the T9215 grade and CVD coating provide the combined wear resistance and toughness required for continuous to lightly interrupted turning. How does the TM chipbreaker affect machining? The TM chipbreaker on the SNMG090308-TM improves chip control and evacuation in turning applications, which helps maintain cutting forces and enhances surface finish when using the Tungaloy carbide grade. Which holders fit the SNMG090308 insert? Compatibility depends on ISO SNMG holder geometry and tolerance class; the SNMG090308-TM insert requires a holder designed for SNMG inserts with a cylindrical-hole clamp and matching size and thickness. What cutting conditions are recommended for this insert? For stable set-ups and medium steel, start with conservative speeds and feeds and increase progressively; the SNMG090308-TM T9215 insert performs best in continuous cutting or slight interruptions, leveraging its wear-resistant coating. Is the insert suitable for interrupted cuts? Yes—within limits. The T9215 grade provides fracture resistance suitable for light interruptions; for heavily interrupted cuts, consider a different geometrical solution or a more robust holder set-up. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090308 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide grade T9215 and a 0.8 mm corner radius delivers consistent wear resistance and reliable chip control for medium steel turning, supporting higher throughput and predictable tool life. Contact Metav Werkzeuge for application advice or specification matching to ensure the insert suits the intended holder and cutting conditions. SNMG 090308 T9215 indexable turning insert (square), Tungaloy — ISO‑standard insert for medium steel turning SNMG090308-TM T9215 Tungaloy-Wendeplatte is an ISO‑standard square indexable insert designed for external and internal turning applications, offering a balance of wear resistance and fracture toughness for productive, continuous to lightly interrupted cuts. CVD-coated carbide, grade T9215 ISO‑standard SNMG square insert 0.8 mm corner radius for accurate profiling 0° clearance angle for robust contact High productivity through wear-resistant cutting chemistry The insert uses a CVD-coated carbide substrate that combines high wear resistance with mechanical robustness, making it a rational choice for jobs where consistent surface quality and predictable tool life are required. By selecting grade T9215, the insert supports medium‑range steel machining with a good trade‑off between durability and toughness, which helps to reduce unscheduled tool changes and maintain cycle times on batch and continuous turning operations. Straightforward fitment and process compatibility Designed as an ISO‑normed SNMG square insert, compatibility with holders depends on form, relief angle, tolerance class, fixing method, size and thickness; this standardisation simplifies tooling procurement and replacement. The insert’s square form, cylindrical hole, and defined thickness ensure secure clamping and repeatable seating in common external holders and boring bars, reducing setup time and the risk of assembly errors. Geometry that supports dimensional accuracy and chip control A 0.8 mm corner radius offers a compromise between edge strength and fine contouring, enabling stable profiling and improved surface finish on external diameters. The TM chipbreaker geometry is tuned for controlled chip formation in medium steel, reducing chip entanglement and supporting continuous feeding, which in turn lowers the need for manual chip handling and contributes to safer, more efficient turning processes. Application guidance and selection rationale This insert is intended for turning operations on medium steels and is suitable for continuous to slightly interrupted cuts. Choosing the correct chipbreaker and insert grade is essential: the combination of T9215 and the TM chipbreaker aims to provide a balance of process security and cutting performance, especially where repeatability and consistent surface quality are priorities. Where application conditions vary, consult tooling specifications to match insert geometry with holder stability and cutting parameters. For tailored recommendations on integrating this Tungaloy SNMG090308-TM insert into existing tooling systems, contact Metav Werkzeuge for application support and fast delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6773866 Manufacturer SKU: TUN6773866 SKU: 6773866-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 0° ISO designation: 090308 Insert size: 09 Angle: 90° Special features Grade / coating: T9215, CVD‑coated carbide Shape: square indexable insert Hole: with cylindrical hole Chipbreaker: TM Typical application: external and internal turning System components: ISO insert with matching holder, shim/locking set and replacement screws Suitability: designed for medium steel machining, continuous to lightly interrupted cuts FAQ What applications is this insert best suited for? The SNMG090308‑TM T9215 insert from Tungaloy is optimised for turning medium steels, providing a balance of wear resistance and fracture toughness for continuous to slightly interrupted cuts. How does the T9215 grade influence performance? Grade T9215 is a CVD‑coated carbide designed to combine high wear resistance with good mechanical strength, which supports higher productivity and consistent surface finish when machining steel. Is the insert compatible with standard SNMG holders? Yes; the insert is ISO‑standard SNMG, so compatibility depends on matching form, relief angle, tolerance class, fixing method, size and thickness to the holder specification. What edge geometry should be expected for profiling and finishing? The 0.8 mm corner radius provides edge strength for profiling while still enabling accurate dimensional control and improved surface quality on turned features. Can this insert handle interrupted cuts? The tool is suitable for continuous to slightly interrupted cutting conditions; for heavy interruptions or unstable setups, review holder rigidity and cutting parameters before proceeding. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 090308 T9225 TM Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade engineered for toughness and a robust chipbreaker to maintain process stability in medium to heavy steel turning; order directly via Metav Werkzeuge or consult our team for application-specific guidance. SNMG 090308 T9225 – ISO SNMG090308 turning insert for medium–heavy steel machining by Tungaloy A SNMG090308-TM T9225 indexable insert for ISO-standard turning, designed for external and internal steel turning where interrupted cuts and variable engagement demand a tougher universal grade. CVD-coated carbide grade T9225 for durability ISO SNMG 090308 shape, 0° relief angle 0.8 mm corner radius for robust cutting edge Suitable for medium to heavy steel turning Durable grade and coating that stabilises production The CVD-coated T9225 grade is a carbide formulation developed for robustness in mixed and interrupted cutting conditions. As a universal turning grade, it combines wear resistance with the toughness necessary when chiploads change or cutting is slightly interrupted; this translates into fewer tool changes and more consistent cycle times. By choosing a CVD surface treatment, the insert benefits from improved adhesion of the coating layer and enhanced thermal protection, which supports longer tool life and predictable wear behaviour in demanding steel applications. ISO conformity and geometry that simplifies tool selection Being an ISO-standardised SNMG insert, compatibility with an insert seat is determined by form, relief angle, tolerance class, fastening, size and thickness; this reduces ambiguity at procurement and assembly stages. The insert features a square form with a cylindrical hole, 3.18 mm thickness and an included angle of 90°, combined with a 0° relief angle for stable cutting on general turning holders. These standardised dimensions ease stocking decisions and help ensure that the insert integrates reliably into common external holders and boring bars, provided the clamping system matches the SNMG geometry. Practical machining advantages and selection advice The TM chipbreaker on this insert is tuned for medium to heavy steel turning, promoting stable chip formation and evacuation under higher feeds. The 0.8 mm corner radius offers a compromise between edge strength and surface finish: it resists edge chipping during interrupted cuts while still delivering acceptable surface quality. For customers aiming for the best balance of productivity and component integrity, this insert performs well where robustness is a priority over fine finishing cuts. Select the chipbreaker and grade based on workpiece stability and machine rigidity to gain the most from the insert’s design. Contact Metav Werkzeuge for application advice or to request a tailored supply of Tungaloy SNMG090308-TM T9225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780737 Manufacturer SKU: TUN6780737 Model series: ISO turning indexable inserts Label: SNMG090308-TM T9225 Tungaloy insert Numbers Corner radius: 0.8 mm Thickness: 3.18 mm Size designation: 09 Included angle: 90° Relief angle: 0° Manufacturer article number: 6780737 Special features CVD-coated carbide T9225 Chipbreaker: TM ISO designation: SNMG090308 Shape: square Hole style: cylindrical hole Application: turning (external and internal) Suited to medium to heavy steel machining Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The SNMG090308-TM T9225 insert is designed primarily for steel machining, offering robust performance in medium to heavy turning operations. How should compatibility with existing holders be checked? Compatibility depends on the ISO form, relief angle, tolerance class, fastening method, size and thickness; verifying these dimensions against the holder specification ensures correct fit for this SNMG090308 insert. What advantages does the T9225 grade provide? T9225 is a CVD-coated carbide grade that combines wear resistance with toughness, making it suitable for changing engagement conditions and slightly interrupted cuts in steel turning. Which chipbreaker is fitted and what is its benefit? The TM chipbreaker promotes stable chip formation during medium to heavy turning, improving evacuation and reducing the risk of built-up edge under higher feed rates. When is the 0.8 mm corner radius recommended? A 0.8 mm corner radius is recommended where a strong cutting edge is required to withstand intermittent impacts while still achieving a reasonable surface finish on steel components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance, broad material versatility and straightforward holder compatibility for stable, economical turning operations. Order the insert directly via Metav Werkzeuge or consult our technical advisors for the optimal grade and chipbreaker selection. SNMG090308-TM T9225 indexable turning insert (square, 0° relief) – Tungaloy The SNMG090308-TM T9225 is an ISO-standard indexable turning insert designed for medium to heavy steel turning, offering a CVD-coated carbide grade and a robust TM chipbreaker for improved chip control. CVD-coated carbide grade T9225 Universal for medium to heavy steel machining ISO SNMG090308 form with 0° relief 0.8 mm corner radius, 3.18 mm thickness Consistent cutting performance under variable conditions The T9225 grade is a CVD-coated carbide developed for robust, universal performance in turning applications where cut conditions vary or interrupted cuts occur. The combination of a wear-resistant coating and a tough substrate provides a balance between tool life and fracture resistance, reducing downtime from insert breakage. The TM chipbreaker promotes stable chip formation at typical feed and depth ranges for medium to heavy steel machining, which helps maintain surface finish and reduces manual chip handling. Explaining briefly: CVD (chemical vapour deposition) adds thin, hard layers to the carbide substrate that improve wear resistance without sacrificing toughness, making the insert suitable for productive, repeatable operations. Geometry and ISO compatibility for predictable set-up The insert follows the ISO SNMG090308 designation, which ensures straightforward mechanical compatibility with standard SNMG holders. Important geometric data such as the 0° relief angle, square plate form, cylindrical mounting hole and a 0.8 mm corner radius define how the insert seats in the holder and how it engages the workpiece. The thickness of 3.18 mm contributes to rigidity under cutting loads. These measurable attributes make tool selection and changeover predictable: the insert seats and clamps with defined tolerances, so machining parameters can be transferred between machines with minimal adjustment. Where holders and clamping hardware match the ISO form, repeatability and process stability are improved. Practical advantages for workshop productivity and tool management Choosing this ISO indexable plate simplifies inventory and process planning: one universal grade handles a wide range of steels, reducing the need for multiple specialised inserts. The grade’s properties—stable chip formation and reliable wear resistance—translate into fewer tool changes and consistent part quality, which supports higher machine utilisation. For shops facing mixed batch sizes or occasional interrupted cuts, the toughness of the grade lowers the risk of premature chipping. If clarification is needed on selecting the correct chipbreaker or confirming holder compatibility, technical guidance is available to align insert geometry, grade and the intended turning application for best results. For personalised advice on tool selection or to order Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; our consultants will recommend the right grade and chipbreaker for the intended turning operation. Technical data Manufacturer article number: 6780872 SKU: 6780872-Tungaloy Manufacturer SKU: TUN6780872 Article name: SNMG090308-TM T9225 Tungaloy turning insert Facts Shape / size: square, 09 Corner radius: 0.8 mm Thickness: 3.18 mm Relief angle: 0° Hole: cylindrical mounting hole ISO designation: 090308 Chipbreaker: TM Angle: 90° Special features Material: carbide Coating / grade: T9225 (CVD-coated) Application: turning; medium to heavy steel machining Model series: ISO indexable turning inserts System composition: insert, compatible external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert suitable for? The SNMG090308-TM T9225 insert is formulated for medium to heavy steel machining and provides the toughness required for variable and lightly interrupted cuts. How does the TM chipbreaker affect machining? The TM chipbreaker on the Tungaloy insert promotes controlled chip formation and evacuation in turning operations, reducing the chance of entanglement and improving surface finish. Is the SNMG090308-TM compatible with standard SNMG holders? Yes; the insert follows the ISO SNMG090308 form, so compatibility with SNMG holders depends on matching form, relief angle, tolerance class, fastening method, size and thickness. Can this insert be used for finishing operations? While the grade is designed for robust, universal performance, the insert can achieve acceptable finishes under appropriate feeds and speeds; fine finishing may require optimised cutting parameters or a different chipbreaker. How is the coating described and what benefit does it bring? The insert uses a CVD coating applied to a carbide substrate (grade T9225), which enhances wear resistance while retaining toughness for reliable tool life in demanding turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090308 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide substrate and the tough T9235 grade, which together provide reliable wear resistance and stability in interrupted cuts; the 0.8 mm corner radius supports consistent finishing. The ISO SNMG090308 format ensures compatibility with standard clamping systems. Order the SNMG090308-TM T9235 indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 090308 T9235 – ISO SNMG indexable turning insert for turning, CVD-coated carbide, 0.8 mm radius (Tungaloy) The SNMG090308-TM T9235 is an ISO-standard indexable insert intended for external and internal turning, combining a square form with a cylindrical-hole fixing and a robust TM chipbreaker for interrupted or unstable cutting conditions. CVD-coated carbide for improved wear resistance Tough grade T9235 for unstable cutting conditions ISO SNMG090308 format with 0.8 mm corner radius Cylindrical hole fixing for secure clamping Proven performance under interrupted and unstable cutting The insert is manufactured from CVD-coated carbide, offering a balance between wear resistance and toughness that suits demanding turning tasks. The T9235 grade is formulated for lower cutting speeds and applications where chip control and edge stability are more critical than maximum cutting speed. This makes the insert particularly effective when machining steels under unstable conditions or where intermittent cuts are expected; the outcome is reduced flank wear and longer tool life, which helps to maintain production continuity and lower overall tooling costs. Built to fit standard systems for quick changeovers Designed in the ISO SNMG090308 format with a square outline, the insert fits a wide range of holders and boring bars. Compatibility is defined by shape, relief angle, tolerance class, fastening method, size and thickness, so the standardised geometry simplifies replacement and inventory management. The cylindrical-hole fixing ensures reliable seating and repeatable positioning, enabling rapid index changes and minimising machine downtime — a rational advantage for busy shop floors seeking predictable cycle times. Better surface quality and controlled chip formation A 0.8 mm corner radius provides a compromise between strength and edge sharpness: it reduces the risk of edge chipping while still supporting acceptable surface finish for turned components. The TM chipbreaker is optimised for the grade and common steel applications, promoting short, manageable chips and consistent contact between the insert and workpiece. For operators unfamiliar with chipbreaker behaviour, the result is easier chip evacuation and fewer process interruptions, which contributes directly to improved component quality and reduced rework. Application guidance for reliable results The insert is intended primarily for turning of steel and is especially suitable where stability is limited or cuts are intermittently interrupted. For best results, pair the insert with a suitable external or internal holder, an appropriate shim or clamping set, and the correct tightening torque for the replacement screws. The system approach — insert, holder, shim/clamping set and spare screws — ensures repeatable clamping and consistent performance across batches. For customers evaluating process windows, the combination of a tough grade and CVD coating offers a pragmatic balance between tool life and machining stability. For reliable performance with the Tungaloy T9235 grade, contact Metav Werkzeuge for application advice or to request a personalised quotation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785990 Manufacturer article number: 6785990 SKU manufacturer: TUN6785990 SKU: 6785990-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: 090308 Insert type: SNMG (square) Size: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 0° Hole style: cylindrical hole Special features Grade: T9235 (tough grade for steel) Substrate: CVD-coated carbide Chipbreaker: TM Application: external and internal turning Compatibility: determined by shape, size, thickness and tolerance FAQ What materials is this insert suitable for? The SNMG090308-TM T9235 insert is engineered primarily for machining steel; the T9235 grade provides toughness for interrupted cuts and unstable conditions when turning steel components. What does the grade T9235 indicate? T9235 denotes a tough, CVD-coated carbide grade designed to withstand interrupted cuts and variable stability while maintaining wear resistance on steel workpieces. How does the SNMG090308 designation translate to geometry? SNMG identifies a square insert with negative geometry; the code 090308 corresponds to size, thickness and other ISO geometry details, here matching a 0.8 mm corner radius and 3.18 mm thickness. How is the insert secured in the holder? The insert uses a cylindrical-hole fixing in combination with a clamping system; secure seating depends on matching shape, relief angle, tolerance class, fastening method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090308 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD‑coated carbide T9235, a stabilising TM chipbreaker and ISO‑standard form for straightforward holder compatibility; these qualities deliver reliable chip control and extended tool life. Order the SNMG090308‑TM insert directly via Metav Werkzeuge or ask our consultants for application support. SNMG 090308 T9235 — Indexable insert for turning by Tungaloy The SNMG090308‑TM T9235 is an ISO‑standard square indexable insert designed for external and internal turning, optimised for steels in interrupted or less stable cutting conditions. CVD-coated carbide T9235 grade Optimised TM chipbreaker for chip control ISO 090308 square insert, 90° cutting edge Consistent cutting in unstable or interrupted turning The CVD‑coated carbide grade T9235 is formulated to perform under lower cutting speeds and in applications with interrupted cuts or limited rigidity. The combination of a tough substrate and a wear‑resistant coating reduces notch formation and prolongs flank life, which translates into fewer indexings and less downtime. As a result, processes that would otherwise require frequent insert changes achieve improved continuity; the insert’s design supports steady chip formation and predictable wear behaviour, helping to keep cycle times and quality consistent. Simple compatibility checks and dimensional clarity Compatibility with a clamping system depends on geometric and tolerance criteria: insert form, relief angle, tolerance class, fastening method, size and thickness. The square, 90° configuration and 0° relief angle make the insert suitable for a wide range of standard external holders and boring bars when the seat and clamping match ISO dimensions. Key dimensions such as corner radius 0.8 mm and thickness 3.18 mm should be confirmed against the holder specification to ensure correct seating and secure fixation. Verifying these values before assembly prevents unstable contact, vibration and premature wear. System setup and practical selection guidance An effective cutting system comprises the ISO indexable insert, a matching external holder or boring bar, the correct clamp or shim and suitable fastening screws. The TM chipbreaker is intended to control chips in steel applications with variable cutting conditions; choose this chipbreaker when intermittent cuts, built‑up edge risk or limited machine stiffness are present. Selection of the grade and chipbreaker should always consider workpiece material, feed and speed as well as machine rigidity — selecting the right combination reduces rework and improves surface finish without increasing cycle time. Productivity and economy through fewer interruptions By aligning the insert grade, chipbreaker and holder geometry to the machining task, workshops achieve higher productivity with lower tool consumption. The CVD coating increases resistance to abrasive wear while the robust substrate copes better with mechanical shocks. These properties lead to longer indexing intervals and a lower cost per component machined. For operations prioritising repeatable results and stable chip control, the insert represents a pragmatic choice that balances tool life and process stability. For application advice or to request original Tungaloy SNMG090308‑TM T9235 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast processing. Technical data Article number: 6786017 SKU: 6786017-Tungaloy Manufacturer SKU: TUN6786017 Designation: SNMG090308-TM T9235 Tungaloy insert Core data Corner radius: 0.8 mm Thickness: 3.18 mm Insert size: 09 Cutting angle: 90° Relief angle: 0° Special features Material: carbide Coating/grade: T9235 (CVD-coated) Chipbreaker: TM Shape: square Hole style: cylindrical hole Series: ISO indexable inserts for turning Application: turning; external and internal turning; interrupted cuts and unstable conditions FAQ What materials is this insert best suited to machine? The Tungaloy SNMG090308‑TM T9235 insert is a tough grade formulated primarily for machining steel, offering improved resistance in interrupted or less stable cutting situations. How does the TM chipbreaker affect machining? The TM chipbreaker promotes reliable chip control in variable conditions; when combined with the T9235 grade it helps prevent long, entangling chips and supports consistent surface quality. Which holders are compatible with this insert form? Holders that accept ISO SNMG‑form inserts with a 09 size, 3.18 mm plate thickness and a square seat suitable for a cylindrical‑hole clamp will be compatible; always confirm holder seat geometry and tolerance class before assembly. What are the key dimensions to check before fitting the insert? Verify corner radius (0.8 mm), plate thickness (3.18 mm), insert size (09) and relief angle (0°) to ensure correct seating and reliable clamping in the chosen toolholder. Is this an original Tungaloy product? Yes, the product is an original Tungaloy indexable insert supplied under the manufacturer’s designation and part number. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 090308 TH10 Wendeplatten - Tungaloy
Reliable uncoated carbide grade TH10 for low cutting forces, ISO compatibility and a 0.8 mm corner radius for stable external and internal turning results. Order the SNMG090308-TM TH10 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG090308-TM TH10 SNMG 090308 — Turning insert (ISO) by Tungaloy, uncoated carbide, TM chipbreaker SNMG090308-TM TH10 is a square ISO turning insert designed for external and internal turning of non-ferrous materials and applications that benefit from a sharp, uncoated cutting edge Uncoated carbide grade TH10 0° clearance for predictable cutting 0.8 mm corner radius for stability ISO compatibility with standard holders Higher productivity with low cutting forces The uncoated TH10 grade is engineered to provide low cutting forces, which reduces spindle load and enables higher effective speeds when machining softer materials. As an uncoated carbide option, the insert offers a sharp cutting edge that supports clean shearing of non-ferrous workpieces, leading to consistent dimensional results and fewer rework cycles. This characteristic is particularly valuable in production environments where cycle time and repeatability determine throughput. Consistent surface quality through stable geometry A defined 0.8 mm radius and a 0° clearance produce predictable tool–workpiece contact that improves finish and tool life under the correct conditions. The modest corner radius balances edge strength and surface quality, helping to avoid premature chipping while preserving a fine finish. Using a chipbreaker matched to cutting conditions further supports consistent chip formation and reduces the risk of built-up edge, which in turn maintains machining stability across longer tool runs. Seamless ISO integration for simplified tool planning Supplied as an ISO-design insert, compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The square plate format and the cylindrical hole allow secure clamping in common external and boring holders, simplifying inventory and tool-change logistics. The standardised dimensions mean easier toolroom planning and reduced downtime when replacing inserts in serial production. Practical choice for flexible workshop use With a chipbreaker type TM and a versatile uncoated grade, this insert suits workshops aiming for straightforward, reliable turning of non-ferrous metals and similar materials. The design supports both roughing and finishing operations when the correct feeds and speeds are selected, and the ISO conformity ensures interchangeability with established tool systems. For specialist tasks, choosing the matching chipbreaker and cutting parameters enables a balance between surface finish and material removal rate. Contact Metav Werkzeuge for tailor-made selection advice on the SNMG090308-TM TH10 insert and to confirm suitability for specific turning operations Technical data Article number: 6806646 Manufacturer SKU: TUN6806646 SKU: 6806646-Tungaloy Model series: ISO turning inserts Material: carbide Facts Size: 09 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 0° Plate form: square Angle: 90° Hole style: cylindrical hole Special features Grade: TH10 (uncoated) Chipbreaker: TM ISO designation: SNMG090308-TM Application: turning (external and internal) Compatibility: ISO holders (form, clearance, tolerance, fastening, size, thickness) FAQ Which materials are best suited to this insert? The SNMG090308-TM TH10 insert is optimised for non-ferrous alloys and applications where an uncoated cutting edge supports low cutting forces and clean surface quality. What chipbreaker is fitted and what does it do? This insert features the TM chipbreaker, which promotes controlled chip formation to aid evacuation and reduce the likelihood of irregular chips in turning operations. How is holder compatibility determined? Compatibility depends on plate form, clearance angle, tolerance class, fastening method, size and thickness; the SNMG090308-TM follows ISO dimensions for secure mounting in standard holders. What are the radius and clearance specifications? The insert has a 0.8 mm corner radius and a 0° clearance angle, providing a balance between edge strength and surface finish for suitable operations. What identifiers should be used when ordering spare inserts? Use the designation SNMG090308-TM TH10 and the article number 6806646 or manufacturer SKU TUN6806646 to ensure the correct item is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 AH6225 Wendeplatten - Tungaloy
Combine the AH6225 PVD-coated carbide grade with a 0.2 mm corner radius and a robust square geometry for dependable medium turning of stainless steels; order original Tungaloy inserts via Metav Werkzeuge or consult our application specialists for integration advice. SNMG 120402 AH6225 indexable turning insert for turning, Tungaloy SNMG120402 AH6225 Tungaloy indexable insert designed for ISO-standard turning operations, offering a sharp yet stable cutting edge for medium machining of stainless steels in external and internal turning. Universal grade for stainless steels PVD-coated carbide for wear resistance Double-sided chipbreaker for versatility Square geometry with 90° approach angle Reliable performance from a universal PVD-coated grade The combination of the AH6225 grade and PVD-coated carbide provides a balance between edge sharpness and wear resistance, resulting in consistent cutting performance under variable conditions. The coating reduces adhesive wear and improves thermal stability, which helps to maintain a stable cutting edge during medium turning operations. As a result, machining cycles show improved repeatability and a more consistent surface finish, especially when processing work-hardening materials such as stainless steels. Straightforward integration into ISO tooling systems Designed to ISO dimensions, the insert fits standard holders when form, relief angle and tolerance class match; compatibility depends on insert shape, relief (0°), fastening and thickness. The square insert geometry and the presence of a cylindrical hole simplify clamping and orientation, reducing changeover time. This standardisation enables straightforward replacement in existing tool assemblies and supports predictable toolset-up, which contributes to shorter downtimes and a smoother production flow. Effective chip control for stainless steel turning The double-sided chipbreaker is optimised for chip control in medium turning of stainless materials, helping to avoid long, stringy chips and reducing the risk of re-cutting. Good chip control supports higher process security and a safer machining environment, while also protecting the machined surface. The breaker geometry, paired with the AH6225 grade, is particularly suitable where alternating cutting conditions occur and where balanced performance between finish and tool life is required. Robust geometry for dimensional accuracy and edge strength A 0.2 mm corner radius together with a plate thickness of 4.76 mm ensures a stable cutting edge that withstands interrupted cuts and light finishing passes. The 90° approach angle and the square form allow precise shoulder and contour turning with predictable tool deflection characteristics. These geometric attributes contribute to accurate component dimensions and repeatable machining results in demanding production settings. Discuss the suitability of the Tungaloy SNMG120402 AH6225 insert with Metav Werkzeuge—contact the application team at info@metav-werkzeuge.com or call +49 2822 7131930 to secure genuine parts and tailored advice Technical data Article number: 6950980 Manufacturer SKU: TUN6950980 Model series: ISO turning indexable inserts Material: Carbide Grade/coating: AH6225 / PVD Manufacturer: Tungaloy Core specifications Insert designation: SNMG120402 Corner radius: 0.2 mm Relief angle: 0° Insert size: 12 mm Thickness: 4.76 mm Approach angle: 90° Hole: cylindrical Special features Square plate form Double-sided chipbreaker ISO-standard compatibility Suitable for turning (external and internal) Optimised for stainless steels FAQ Which materials is this insert suitable for? The SNMG120402 AH6225 insert is optimised for stainless steels, offering a universal compromise between edge sharpness and robustness for medium turning tasks. How is the insert secured in the holder? Compatibility depends on form, relief angle and tolerance class; the SNMG120402 uses a cylindrical hole and standard ISO clamping interfaces typical of square indexable inserts. What advantage does the AH6225 grade deliver? The AH6225 PVD-coated carbide provides improved wear resistance and thermal stability, extending effective cutting life while maintaining a sharp cutting edge under varying conditions. Is the insert single- or double-sided? This Tungaloy insert is double-sided with a chipbreaker on both faces, allowing cost-effective indexation and extended usage before disposal. What is the corner radius and why does it matter? The corner radius is 0.2 mm, offering a balance between edge strength and the ability to achieve fine surface finishes; it is suitable for precise shoulder and contour turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 AH6225 Wendeplatten - Tungaloy
Take advantage of a durable, PVD-coated cemented carbide grade that balances a sharp cutting edge with stability for medium turning operations; the square 12 mm geometry with a 90° included angle and a 0.2 mm corner radius ensures consistent results on rostfreier Stahl and mixed batches. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. SNMG 120402 AH6225 Tungaloy turning insert — ISO SNMG120402 for turning The SNMG120402 AH6225 is an ISO‑format indexable turning insert designed for external and internal turning, offering a universal grade optimised for rostfreier Stahl in medium machining applications. PVD-coated cemented carbide grade AH6225 Designed for rostfreier Stahl applications Square 12 mm insert with 90° included angle Double-sided chipbreaker, with cylindrical hole Reliable cutting for stainless components and mixed batches The PVD coating combined with cemented carbide provides a controlled edge geometry that resists premature wear while maintaining a keen cutting line. This combination supports stable chip formation under variable conditions, which is particularly important when machining rostfreier Stahl, where workhardening and strain-hardening can otherwise compromise surface finish. The insert’s geometry — a 90° included angle and a corner radius of 0.2 mm — allows predictable engagement with the workpiece and reduces the need for frequent tool changes, increasing uptime in batch production. By selecting a universal grade such as AH6225, process planners obtain a compromise between edge sharpness for cutting performance and robustness for interrupted cuts. Compatibility and mounting that simplify toolset decisions The SNMG format follows ISO specifications, so compatibility with standard indexable turning holders is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The insert is square and double-sided, providing two usable edges per side and extending component life per insert. The presence of a cylindrical hole facilitates positive location and secure clamping in many standard holders, while the 4.76 mm thickness and 12 mm size meet common toolholder profiles. These measurable attributes enable planners to standardise on fewer holder types and reduce tool inventory complexity, supporting a leaner tooling strategy and more predictable procurement. Productivity uplift and predictable tool life in everyday machining For production-focused environments, the key metrics are cycle time, surface quality and repeatability. The AH6225 grade was developed for a balance of wear resistance and edge stability, delivering improved process security and consistent part finish across variable conditions. The double-sided chipbreaker aids controlled chip splitting, lowering the risk of long, entangling chips that slow operations or endanger surface quality. Together, the geometry and coating translate into fewer interventions, longer service intervals and more consistent throughput — benefits that are measurable in reduced non-productive time and higher overall tool utilisation. Contact Metav Werkzeuge for availability and application guidance on the SNMG120402 AH6225 turning insert — specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966183 Manufacturer SKU: TUN6966183 SKU: 6966183-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: AH6225 (PVD-coated) Key measurements Insert designation: SNMG120402 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 90° Clearance (free) angle: 0° Hole: with cylindrical hole Design and special features Square insert, double-sided usage PVD-coated cemented carbide grade AH6225 Double-sided chipbreaker for controlled chips Compatible with ISO turning holders and clamping systems Intended application: Drehen (turning) Optimised for rostfreier Stahl and variable cutting conditions FAQ What materials is this insert suitable for? The SNMG120402 AH6225 insert is formulated primarily for rostfreier Stahl; the AH6225 grade offers balanced wear resistance and edge stability for medium turning of stainless components. How is the insert mounted and secured in the holder? The insert uses a cylindrical hole for positive location and clamping; its ISO SNMG format ensures compatibility with standard indexable turning holders that accept 12 mm square inserts. What are the key dimensional values to check before ordering? Verify the insert size (12 mm), thickness (4.76 mm), corner radius (0.2 mm) and the 90° included angle to ensure fit with the chosen holder and the intended cutting strategy. Does the PVD coating extend tool life for interrupted cuts? The PVD-coated cemented carbide construction of the AH6225 grade enhances edge stability and wear resistance, improving performance under variable and interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade (AH6225) and a 90° square geometry to achieve consistent, stable cuts in stainless steel; the 0.2 mm corner radius supports fine finishing while the double-sided chipbreaker extends service intervals. Order the insert directly via Metav Werkzeuge or consult the technical team for mounting compatibility and cutting-parameter advice. SNMG120402 AH6225 SNMG turning insert by Tungaloy — PVD-coated carbide, 90° square The SNMG120402 AH6225 is an ISO-standard turning insert designed for external and internal turning; its square form and cylindrical hole ensure reliable clamping and repeatable positioning. PVD-coated carbide AH6225 Optimised for stainless steel machining Double-sided chipbreaker for flexible cutting 90° square form for stable cutting Stable performance on stainless steel at variable conditions The combination of the AH6225 PVD coating and a carbide substrate delivers a cutting edge that balances sharpness and robustness for medium machining. The coating reduces built-up edge formation when machining stainless steel, which in turn keeps surface finish consistent and diminishes rework. For production environments where material batches and cutting conditions vary, this composition helps maintain feed and speed settings longer before adjustment is required, supporting predictable cycle times and fewer tool changes. ISO form and geometry that simplify holder selection and setup Built to ISO dimensions, the square 90° geometry and cylindrical hole make the insert compatible with a wide range of ISO external holders and boring bars; compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The 0.2 mm corner radius provides a compromise between strength and edge acuity: small radii improve finish on light cuts, while the square form gives rigid support for heavier cross-sections. Clear labelling and standardised sizing reduce setup time and lower the risk of incorrect clamping. Productivity gains through stable chip control and economical indexing The double-sided chipbreaker affords two cutting edges per side, enabling efficient chip control across common turning tasks and extending the usable life of each insert through simple indexing. This reduces tool-change downtime and raises process throughput. Selecting the correct chipbreaker style and pairing it with the AH6225 grade supports consistent cutting forces and helps protect the cutting edge during interrupted cuts, which in turn contributes to lower overall machining costs and improved plant efficiency. Contact Metav Werkzeuge for tailored recommendations on tool holders, cutting data and fast supply of Tungaloy PVD-coated inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6950994 SKU: 6950994-Tungaloy Manufacturer SKU: TUN6950994 Model series: ISO-Drehwendeschneidplatten Grade: AH6225 Material: Hartmetall Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Approach angle: 90° Clearance angle: 0° Special features Square insert form With hole — cylindrical hole Double-sided chipbreaker PVD-coated carbide grade AH6225 Intended for turning (external and internal) ISO-standard compatibility for holders, clamping and tolerances FAQ What materials is this insert suitable for? The SNMG120402 AH6225 Tungaloy insert is designed as a universal grade for stainless steel and performs well across a range of stainless and alloyed materials when cutting parameters are matched. How does the AH6225 coating affect tool life? The PVD-coated AH6225 grade improves edge stability and reduces adhesion on the cutting edge, which generally extends the interval between indexings and replacements for the insert. Is the insert reversible or single-use per side? The insert features a double-sided chipbreaker, allowing multiple indexings; this extends the number of available cutting edges and enhances cost-efficiency per insert. Which holder types are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fixing method, size and thickness; the ISO-standard dimensions of this insert simplify selection of compatible external holders and boring bars. What cutting applications is the insert intended for? This insert is recommended for both external and internal turning tasks, offering a balance between finish quality and edge robustness suitable for medium machining and variable operating conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 AH8015 Wendeplatten - Tungaloy
High wear resistance and a stable cutting edge make for productive turning of heat-resistant alloys; the PVD-coated carbide grade balances toughness and durability. ISO compatibility simplifies holder selection and set-up. Order the SNMG120402 AH8015 insert directly via Metav Werkzeuge or ask our consultants for application support. SNMG 120402 AH8015 indexable turning insert for turning – Tungaloy SNMG120402 AH8015 is an ISO-standard indexable turning insert intended for general external and internal turning of heat-resistant alloys PVD-coated carbide grade AH8015 Designed for heat-resistant alloys Double-sided chipbreaker 0.2 mm corner radius, square 12 mm Reliable cutting performance for heat-resistant alloys The SNMG120402 AH8015 turning insert combines a PVD coating with a wear-resistant carbide substrate to provide consistent performance when machining demanding materials. The selected grade offers an equilibrium between edge stability and abrasion resistance, which reduces unexpected tool changes and supports steady cycle times. For applications that require repeatable surface quality, the coated substrate helps maintain cutting geometry under thermal and mechanical load, delivering predictable results in series production. System compatibility and straightforward toolset-up Compatibility with toolholders is defined by form, clearance angle, tolerance class, clamping method, size and thickness. The square 12 mm format and cylindrical mounting hole make this insert suitable for a wide range of ISO-compatible external holders and boring bars. Selecting the correct chipbreaker and insert grade according to workpiece material and machining stability minimises setup iterations. Clear, standardised dimensions ensure quick replacement and reduce downtime in the workshop. Productivity gains through chip control and geometry A double-sided chipbreaker design supports reliable chip formation and evacuation across a range of feeds, which improves process stability and reduces rework. The modest 0.2 mm corner radius is a compromise between edge strength and surface finish, allowing delicate profiling while still withstanding moderate interruptions. These geometry choices contribute directly to higher material removal rates and longer effective tool life when compared with uncoated or improperly matched grades. Practical application guidance and operational benefits For turning tasks, select the chipbreaker and grade to suit the workpiece and the machining method; for unstable setups choose a more robust cutter-body and conservative feeds. The insert’s ISO conformity simplifies stocking and reorder processes, as the same SNMG120402 form fits many common holders. Together with a matching clamping kit and spare screws, this approach supports quick changeovers and consistent machining results, helping to maintain throughput in production environments. For expert advice on using Tungaloy turning inserts and to procure genuine SNMG120402 AH8015 parts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — our consultants provide application-focused recommendations and supply. Technical data Article number: 6950997 SKU: 6950997-Tungaloy Manufacturer SKU: TUN6950997 Label: SNMG120402 AH8015 Tungaloy-Wendeplatte Material: Carbide Coating: PVD Numbers / Facts Corner radius: 0.2 mm Insert size: 12 mm (square) Thickness: 4.76 mm Included angle: 90° Rake angle: 0° Angle: 90° Special features / Designs ISO designation: SNMG120402 Grade: AH8015 Double-sided chipbreaker Cylindrical mounting hole Suitable for turning of heat-resistant alloys Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness System composition: ISO insert, matching external holder or boring bar, shim/clamping set and spare screws FAQ Which materials is this insert best suited for? The SNMG120402 AH8015 insert uses a PVD-coated carbide grade optimised for machining heat-resistant alloys while maintaining a balance between wear resistance and edge stability. Is the insert indexable or reversible? The insert is indexable and features a double-sided chipbreaker; the geometry allows rotation to present a fresh cutting edge and supports repeatable cutting performance. How is the compatibility with toolholders ensured? Compatibility is determined by the insert form, clearance angle, tolerance class, clamping method, size and thickness; matching these parameters ensures the insert fits the intended holder or boring bar. What benefit does the 0.2 mm corner radius bring? A 0.2 mm corner radius provides improved edge strength over smaller radii while still enabling fine surface finishes, making it suitable for a range of turning tasks where a balance of durability and finish is required. Does the insert come with any coating and what is its purpose? The insert's PVD coating increases surface hardness and wear resistance, which prolongs the effective tool life and supports stable cutting conditions on tougher alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015 for improved wear resistance and the precise 0.2 mm corner radius to maintain consistent surface quality during external and internal turning; order directly via Metav Werkzeuge or request application advice from our specialists. SNMG 120402 AH8015 indexable insert for turning – PVD-coated carbide, 0.2 mm radius (Tungaloy) The SNMG120402 AH8015 is an ISO-standard, square indexable insert developed for general turning operations, offering a balanced carbide grade for machining heat‑resistant alloys in both external and internal applications. SNMG 120402 ISO insert for turning PVD-coated carbide grade AH8015 0.2 mm corner radius for fine finishing Double-sided chipbreaker, with cylindrical hole Consistent results through balanced grade and coating The PVD-coated carbide grade AH8015 combines wear resistance with controlled edge stability, making it suitable as a first choice for machining heat‑resistant alloys. The thin, hard PVD layer reduces flank wear and improves tool life under higher temperatures, while the substrate supports shock resistance at interrupted cuts. This results in more predictable tool performance and longer intervals between indexings or insert changes, which increases uptime on production lathes. Productivity and surface quality from geometry and chip control A 0.2 mm corner radius provides a reliable compromise between strength and the ability to achieve fine surface finishes in turning. The insert’s double-sided chipbreaker is optimised for chip formation in a range of cutting parameters, reducing the risk of built-up edge and facilitating stable material evacuation. Together, geometry and chip control help maintain process stability, enabling faster cycles without sacrificing finish quality. Compatibility and easy integration into existing tool systems The insert conforms to ISO dimensions and features a cylindrical hole for secure fastening, so compatibility with appropriate SNMG holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The standardised format simplifies tool selection and replacement in established turning tool systems, avoiding costly downtimes caused by mismatched components while ensuring repeatable clamping and positional accuracy. Practical benefits for workshop planning and process engineering Selecting this indexable insert supports economical machining through extended tool life and predictable behaviour when turning demanding alloys. The grade’s balance of properties reduces the need for frequent tool changes and allows process engineers to standardise on a versatile insert for a broad material spectrum. Technical teams can thus optimise cutting data and fixtures around a stable insert platform to raise overall shop productivity. Contact Metav Werkzeuge for cutting data, recommended holders and application support for the Tungaloy SNMG 120402 AH8015 insert via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specific machining requirements Technical Data Manufacturer article number: 6966184 SKU: 6966184-Tungaloy Manufacturer SKU: TUN6966184 Facts Corner radius: 0.2 mm Thickness: 4.76 mm Inscribed circle / size: 12 mm Included angle: 90° Special features PVD-coated carbide (AH8015) ISO-standard SNMG120402 designation Square plate form with cylindrical hole Double-sided chipbreaker Application: external and internal turning Designed for heat‑resistant alloys FAQ What materials is this insert suitable for? The Tungaloy SNMG120402 AH8015 insert is intended primarily for machining heat‑resistant alloys; the AH8015 grade provides a balance of wear resistance and edge strength for general turning tasks. How does the chipbreaker affect machining? The double-sided chipbreaker on this indexable insert promotes controlled chip formation and evacuation, supporting stable cutting conditions and improved surface quality during turning. Which clamping systems are compatible with the SNMG120402 insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening type, size and thickness; the insert is ISO‑standard so it fits holders designed for SNMG 120402 dimensions. What benefit does the PVD coating provide? The PVD coating on the AH8015 grade increases thermal and abrasive resistance at the cutting edge, extending tool life and maintaining cutting performance in elevated temperatures. Is technical documentation or cutting data available for this insert? Cutting data and application recommendations for the Tungaloy SNMG120402 AH8015 insert are available on request from Metav Werkzeuge to support process optimisation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance and ISO conformity for predictable tool life and stable machining of heat-resistant alloys; order directly via Metav Werkzeuge or request cutting-data consultation from our specialists. SNMG120402 AH8015 ISO turning insert — PVD-coated carbide by Tungaloy The SNMG120402 AH8015 is an ISO-standard square indexable insert for general turning applications, optimised for machining heat-resistant alloys. ISO SNMG 120402 form, 12 mm square PVD-coated carbide AH8015 Balanced wear resistance and edge stability Double-sided chipbreaker, 0.2 mm corner radius Reliable performance on heat-resistant alloys The AH8015 grade is a PVD-coated carbide developed as a first choice for the general machining of heat-resistant alloys. Its composition offers a measured compromise between wear resistance and edge stability, which translates into longer effective cutting periods and fewer unscheduled insert changes. The coating reduces adhesive wear at elevated temperatures and improves resistance to crater wear; this results in steadier cutting forces and more consistent part quality when turning demanding alloys on conventional and CNC lathes. Consistent holder compatibility for predictable setups As an ISO SNMG insert, compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness. The square 12 mm format with a 4.76 mm thickness and a nominal 0.2 mm corner radius suits many external holders and boring bars. The insert features a cylindrical hole and a 90° included angle, with a listed clearance angle of 0°; selecting a matching holder and correct clamping set is essential for secure fixation and repeatable concentricity. Correct pairing reduces vibration, preserves the cutting edge and supports reproducible surface finish. Better chip control and economical use at the machine The double-sided chipbreaker design delivers effective chip control across a range of cutting conditions, helping to prevent entanglement and improving shop-floor safety. Being double-sided also provides an economic benefit: the insert can be indexed to present a fresh cutting edge, lowering cost per cutting edge compared with single-use solutions. The balanced geometry promotes a good surface finish in both external and internal turning operations, while the moderate corner radius supports light interrupted cuts and general-purpose profiling. Metav Werkzeuge can advise on matching holders, clamping sets and cutting parameter windows to align the insert’s strengths with specific machine set-ups and workpiece materials; if in doubt, ask for the suitable chipbreaker and grade for the intended machining task. Contact Metav Werkzeuge for tailored cutting-data recommendations and to place orders for the SNMG120402 AH8015 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6950982 SKU: 6950982-Tungaloy Manufacturer SKU: TUN6950982 Core technical data Insert designation: SNMG120402 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included hole: cylindrical Included angle: 90° Materials & features Grade: AH8015 (PVD-coated) Material: Carbide Double-sided chipbreaker ISO turning insert series Compatible with matching external holders and boring bars FAQ What materials is this insert designed for? The SNMG120402 AH8015 insert is intended primarily for the general turning of heat-resistant alloys; the AH8015 grade provides a balance of wear resistance and edge stability suitable for such materials. How is the insert fixed to a holder? The insert uses a cylindrical hole and is secured by the holder’s clamping system; compatibility depends on form, clearance, tolerance class, fastening type, size and thickness. Can the insert be used for both external and internal turning? Yes, the geometry and chipbreaker make the insert suitable for both external and internal turning when paired with an appropriate external holder or boring bar. What advantage does the double-sided chipbreaker offer? The double-sided chipbreaker enables indexing to fresh edges and improves chip control, which lowers operating costs and enhances process reliability. Is the AH8015 coating suitable for high-temperature cutting? The PVD-coated AH8015 grade is formulated for improved performance on heat-resistant alloys and offers enhanced resistance to adhesive and crater wear at elevated temperatures. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com