SNMG 120404 AH6225 Wendeplatten - Tungaloy
Combining a PVD-coated carbide AH6225 grade with an ISO SNMG120404 geometry and a 0.4 mm corner radius yields stable cutting performance for stainless steel turning and good edge life under variable conditions. Order the (SNMG120404 AH6225 Tungaloy indexable insert) directly via (Metav Werkzeuge) or ask our consultants if needed. SNMG 120404 AH6225 Tungaloy indexable insert – for turning The SNMG120404 AH6225 Tungaloy indexable insert is an ISO‑standard, square insert engineered for versatile external and internal turning of stainless steels, combining a sharp yet robust cutting edge with a double‑sided chipbreaker. PVD-coated carbide grade AH6225 Optimised for stainless steel turning 0.4 mm corner radius for finishing Cylindrical hole, double-sided chipbreaker High cutting performance and material suitability The combination of AH6225 and a PVD‑coating provides a balanced blend of wear resistance and toughness, which is particularly beneficial when machining stainless steels under varying conditions. The coated carbide substrate reduces built‑up edge formation and improves surface finish at medium cutting regimes. For production environments where process stability matters, this geometry supports consistent results by offering a sharp, stable cutting edge that resists edge chipping while maintaining acceptable tool life. Technical terms: PVD stands for physical vapour deposition, a thin hard coating that increases abrasion resistance without significantly reducing toughness. Easy integration into ISO tooling systems The SNMG form (ISO designation 120404) is a square, 90° insert designed for straightforward mounting in compatible external holders or boring bars. Compatibility is determined by form, free angle, tolerance class, fastening, size and thickness, so a correct holder selection ensures secure clamping and predictable performance. This insert features a cylindrical hole and accepts the common fastening systems used in ISO tooling, while the 0° relief angle and a 4.76 mm plate thickness provide a stable platform for moderate to heavy interrupted cuts. The double‑sided configuration permits indexation, effectively doubling the number of usable edges and lowering per‑edge cost in high‑volume applications. Practical selection and process recommendations Choose the chipbreaker and grade to match the specific workpiece and machining strategy: the supplied double‑sided chipbreaker is suitable for a broad range of turning tasks, while the AH6225 grade is optimised for mid‑range stainless steel applications where a balance of edge sharpness and stability is required. For best results, use a rigid tool setup, moderate feed to exploit the 0.4 mm corner radius for improved surface finish, and appropriate cutting fluid to manage heat and adhesion on sticky alloys. Optimising these parameters improves cycle time, reduces scrap and enhances overall process economy. For ordering and application advice on the Tungaloy SNMG120404 AH6225 insert, contact Metav Werkzeuge for direct procurement and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6826084 Manufacturer SKU: TUN6826084 Manufacturer: Tungaloy Facts ISO designation: SNMG120404 Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° Hole: with hole (cylindrical) Special features Material: carbide Coating: PVD‑coated Grade: AH6225 Chipbreaker: double‑sided Plate form: square Application: turning (external and internal) Model series: ISO turning inserts FAQ What materials is this insert suitable for? The SNMG120404 AH6225 insert is formulated for stainless steels and performs well in mid‑range turning tasks where a stable, sharp edge is required. How many cutting edges are available per insert? Thanks to the double‑sided chipbreaker and the square geometry, the insert provides multiple indexable edges, effectively reducing tooling costs per edge. Is the insert compatible with standard SNMG holders? Yes, the SNMG120404 geometry follows ISO standards; compatibility is defined by holder form, free angle, tolerance class, fastening, size and thickness—select a matching SNMG holder for secure mounting. What are the benefits of the AH6225 grade and the PVD coating? The AH6225 grade offers a balance of sharpness and edge stability, while the PVD coating improves abrasion resistance and helps prevent built‑up edge when machining stainless steels. Where can I get technical advice or order this insert? For technical guidance and ordering, Metav Werkzeuge can advise on holder selection, cutting data and availability for the SNMG120404 AH6225 Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, PVD-coated AH6225 grade and the proven SNMG120404 geometry for reliable, mid-range turning of rostfreier Stahl; order directly via Metav Werkzeuge or ask our consultants for application guidance. SNMG120404 AH6225 square indexable insert for turning by Tungaloy The SNMG120404 AH6225 is an ISO-standard square indexable insert designed for external and internal turning, delivering a stable cutting edge and consistent performance in rostfreier Stahl applications. SNMG120404 ISO geometry, square insert PVD-coated carbide AH6225 for rostfreier Stahl 0.4 mm corner radius for versatile turning Double-sided chipbreaker, hole-mounted design Consistent edge life through PVD-coated AH6225 The AH6225 grade is a PVD-coated Hartmetall developed for a wide range of rostfreier Stahl machining tasks. Its coating and substrate combination promote a sharp yet stable cutting edge, which reduces flank wear during interrupted cuts and variable conditions. For production environments that demand repeatable tool life, this grade offers predictable durability, lowering the need for frequent index changes and supporting steady throughput. Secure seating and dimensional compatibility for minimal setup time The ISO SNMG120404 geometry ensures compatibility with standard SNMG holders; the square form and cylindrical hole enable a reliable clamp interface. The insert’s 90° approach angle and 0° clearance specification support straightforward tool setting and predictable cutting forces. These design choices simplify fixture selection and reduce setup iterations, helping to maintain machine utilisation and improve first-pass accuracy. Improved chip control and process security Equipped with a double-sided chipbreaker, the insert stabilises chip formation in medium turning operations and promotes consistent evacuation. Stable chips reduce the risk of re-cutting and help maintain surface integrity, which in turn decreases unplanned rework. The insert’s geometry and chipbreaker are optimised for varied cutting conditions, enabling a balance between surface finish and material removal rate. Versatile use and practical handling in workshop environments A 0.4 mm corner radius delivers a compromise between strength and profile accuracy, suitable for general-purpose finishing and light roughing of rostfreier Stahl. The insert is double-sided, enabling index changes to extend service life and reduce tooling costs per part. As part of a system—insert, suitable external holder or boring bar, clamping kit and replacement screws—the component integrates into existing ISO-based tool setups with minimal adaptation. For robust and productive turning with Tungaloy’s AH6225 grade, contact Metav Werkzeuge for tailored recommendations and fast supply. Technical Data Article number: 6826331 Manufacturer SKU: TUN6826331 SKU: 6826331-Tungaloy ISO designation: SNMG120404 Facts Corner radius: 0.4 mm Approach angle: 90° Relief angle: 0° Thickness: 4.76 mm Inscribed circle/size: 12 mm Special features Grade/coating: AH6225, PVD-coated Material: Hartmetall Chipbreaker: doppelseitig Hole: mit Loch Hole style: zylindrisches Loch Plate form: quadratisch Series: ISO-Drehwendeschneidplatten Application: Drehen FAQ What materials is this insert suitable for? The SNMG120404 AH6225 insert is specified for rostfreier Stahl and general turning tasks where a PVD-coated Hartmetall grade is advantageous. How does the AH6225 grade affect tool life? The PVD-coated AH6225 provides a balanced combination of edge sharpness and wear resistance, resulting in predictable tool life under medium machining conditions. Is the SNMG120404 compatible with standard SNMG holders? Yes, the ISO SNMG120404 geometry and square form are designed for compatibility with standard SNMG external holders and boring bars. What cutting tasks match the 0.4 mm corner radius? A 0.4 mm corner radius suits finishing and light roughing cycles, offering a compromise between edge strength and profile accuracy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Combine the sharp, stable cutting edge of the PVD‑coated AH6225 grade with proven ISO geometry for predictable tool life and efficient turning operations. Order the SNMG120404 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120404 AH6225 — ISO turning indexable insert for turning, Tungaloy SNMG120404 AH6225 is an ISO‑standard square, double‑sided indexable insert designed for external and internal turning with a focus on rostfreier Stahl ISO‑standard square insert PVD‑coated carbide AH6225 Double‑sided chipbreaker Suitable for rostfreier Stahl Consistent cutting performance with a universal PVD grade The combination of a PVD‑coated surface and a tough carbide substrate in grade AH6225 provides a balanced cutting edge that performs reliably under varying conditions. This universal grade is optimised for machining rostfreier Stahl, offering a compromise between sharpness for surface quality and edge stability to resist notch wear. The coating improves heat resistance and reduces adhesion, which translates into fewer interruptions for edge dressing and longer productive tool life. The result is improved process stability and more consistent component quality on batch and single‑piece production. Predictable fit and repeatability through ISO geometry The ISO designation ensures compatibility with standard external holders when form, clearance angle, tolerance class, fastening and size are matched. The square shape with an inscribed circle of 12 mm and a nominal clearance angle of 0° yields a rigid seating and reproducible clamping behaviour. With a central cylindrical hole for positive locating and secure fastening, the insert integrates seamlessly into common toolholder systems. This standardisation reduces setup time, simplifies inventory and supports stable machining cycles across different machines and applications. Design features that reduce downtime and optimise costs A double‑sided chipbreaker provides two indexed cutting edges per side, effectively doubling usable edges and lowering tool‑consumption costs. The corner radius 0.4 mm offers a compromise between strength and surface finish, while the 4.76 mm thickness improves insert rigidity under interrupted cuts. The combination of sturdy geometry and a modern chip control design reduces built‑up edge and promotes reliable swarf evacuation, which limits machine stoppages and contributes to shorter non‑productive time in series turning and varied batch sizes. Application range and recommended uses for workshop efficiency Intended primarily for turning, the insert suits both external and internal operations with a wide span of process demands, especially where rostfreier Stahl is predominant. Select the chipbreaker and insert grade in line with workpiece material, depth of cut and machine stability to unlock the full potential of the cutting edge. For shops seeking predictable surface quality with robust performance under fluctuating conditions, this solution balances finish quality and tool life, supporting higher throughput with controlled costs. Consult Metav Werkzeuge for tailored tooling recommendations and supply of Tungaloy inserts — contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert selection and fast fulfilment Technical data Article number: 6947295 SKU: 6947295‑Tungaloy Manufacturer SKU: TUN6947295 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: SNMG120404 AH6225 Tungaloy‑Wendeplatte Core numerical data Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 90° Features & applications Material: Hartmetall (carbide) Coating: PVD‑coated (AH6225) Chipbreaker: double‑sided Hole: with hole — cylindrical hole Shape: square Typical use: external and internal turning, rostfreier Stahl machining FAQ What materials is this insert intended for? The SNMG120404 AH6225 insert is a universal PVD‑coated carbide grade intended primarily for machining rostfreier Stahl and similar demanding alloys. Is the insert compatible with standard ISO holders? Yes, the ISO designation and square form enable compatibility with standard external holders when form, clearance, tolerance class, fastening and size are matched. How does the chipbreaker affect machining? The double‑sided chipbreaker improves chip control and evacuation, reducing built‑up edge and enabling more stable cutting conditions with fewer interruptions. Can this insert be used for both roughing and finishing? With its 0.4 mm corner radius and AH6225 grade, the insert suits medium finishing and general turning tasks; selection of chipbreaker and cutting parameters will determine optimal performance for roughing or finishing. How many cutting edges are available per insert? The double‑sided, square geometry provides multiple indexed edges per insert, effectively extending service life before replacement is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade and ISO-compliant geometry for consistent results in stainless steel turning; the double-sided chipbreaker and secure cylindrical hole reduce changeover time and support stable cutting. Order the SNMG120404 AH6225 indexable insert directly via Metav Werkzeuge or consult the team for application advice. SNMG120404 AH6225 indexable insert for turning — Tungaloy The SNMG120404 AH6225 indexable insert is an ISO-standard, square 90° turning insert designed for medium finishing and general-purpose turning of stainless steels, offering a sharp yet stable cutting edge in varying conditions. ISO SNMG 120404 geometry for standard holders PVD-coated carbide AH6225 for stainless steel Double-sided chipbreaker for stable cutting Cylindrical hole for secure clamping Consistent cutting in stainless steel with a universal PVD grade The combination of a PVD-coated surface and the AH6225 carbide composition provides a balance between edge sharpness and wear resistance tailored for stainless steels. This grade is formulated to maintain a sharp cutting edge under changing cutting conditions, which translates into reliable surface finishes and extended insert life during medium machining operations. The coating reduces adhesion and built-up edge formation on difficult-to-machine alloys, helping to sustain cutting parameters and lower the frequency of insert changes. Predictable compatibility and secure clamping for faster setup The insert follows the ISO SNMG 120404 geometry and a square 90° shape, ensuring interchangeability with corresponding standard holders. The insert features a cylindrical hole for positive seating and a 0.4 mm corner radius, which provides a compromise between edge strength and detail in contour work. Because compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, the standardised geometry simplifies tool procurement and reduces set-up time on the shop floor. Economical operation through indexability and chip control Being double-sided, the insert offers two usable cutting edges per index position, enabling economical tool usage and fewer index changes. The integrated chipbreaker geometry promotes predictable chip formation and evacuation; stable chips reduce the risk of surface damage and tool interference during turning. In practice, the result is less downtime for insert replacement and a more continuous production flow, which supports cost-efficient machining without sacrificing process reliability. Practical selection and workshop guidance Selection of the correct chipbreaker and grade should be aligned with workpiece material, machining type and machine stability; the AH6225 grade and the PVD-coated carbide construction are optimised for a broad range of stainless steel alloys, but performance improves further when feed rates and speeds are tuned to the alloy and fixturing. For assistance with parameter selection or to verify suitability for a particular application, Metav Werkzeuge can provide technical advice and supplementary data by email or phone. For reliable turning of stainless steels with Tungaloy quality, request application guidance or place orders via Metav Werkzeuge—technical consultation and procurement support are available from Metav Werkzeuge. Technical Data Article number: 6947302 SKU: 6947302-Tungaloy Manufacturer SKU: TUN6947302 Model series: ISO indexable turning inserts Material: carbide Grade: AH6225 Coating: PVD Facts ISO designation: SNMG120404 Insert size: 12 Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Shape: square (90°) Hole: with cylindrical hole Special features Double-sided chipbreaker Universal grade for stainless steels ISO-compliant geometry for standard holders Sharp, stable cutting edge for medium machining Compatible with holder by form, free angle, tolerance and fastening FAQ What materials is this insert suited for? The SNMG120404 AH6225 indexable insert is designed primarily for stainless steels and provides a balanced combination of sharpness and wear resistance for medium turning operations. How does the AH6225 grade improve machining of stainless steel? The AH6225 PVD-coated carbide grade reduces adhesion and supports a stable cutting edge under variable conditions, which helps to limit built-up edge and maintain consistent surface quality with longer edge life. Can the insert be used in standard ISO SNMG holders? Yes. The ISO SNMG 120404 geometry and the cylindrical hole ensure compatibility with corresponding standard external holders, provided form, relief angle, tolerance class, fastening, size and thickness match the holder specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade engineered for stainless steel and a compact, ISO‑standard form delivers reliable medium‑duty turning with predictable edge life; choose the SNMG120404 insert for consistent surface quality and efficient indexing. Order this insert directly via Metav Werkzeuge or consult the team for application support. SNMG120404 AH6225 Tungaloy indexable turning insert — PVD-coated carbide, 0.4 mm corner radius The SNMG120404 AH6225 is an ISO‑standard square insert designed for versatile external and internal turning, offering a sharp yet stable cutting edge for changing stainless steel machining conditions. PVD-coated carbide grade AH6225 Universal for stainless steel machining 0.4 mm corner radius for precise profiles Double-sided for economical indexing ISO SNMG120404, square 12 mm size Consistent cutting performance for stainless steels The PVD coating on the carbide substrate provides a hard, wear‑resistant surface that improves heat resistance and reduces built‑up edge when machining stainless steel. This insert combines a sharp cutting edge with inherent stability, which helps maintain dimensional accuracy during medium machining operations. The result is dependable surface finish and fewer interruptions for insert changes, supporting steady production flow and lower overall machining costs. Secure seating and compatibility with ISO holders Compatibility with a toolholder depends on form, clearance, tolerance class, fastening method, size and thickness; the ISO SNMG120404 geometry ensures interchangeability with standard external holders and boring bars. The insert’s cylindrical hole and 90° seating angle provide reliable clamping force and repeatable positioning, while the 0° clearance specification suits general turning setups where positive rake seating is required. These features simplify setup and reduce the need for bespoke adaptions. Economical indexing and predictable tool life Being double-sided offers two usable cutting edges per face, increasing the number of effective indexings before disposal and enhancing cost efficiency per edge. The 0.4 mm corner radius permits precise profile generation without compromising edge strength, and the 4.76 mm thickness contributes to mechanical rigidity under variable cutting conditions. Together, these attributes help achieve longer uninterrupted runs and predictable maintenance intervals. Practical selection advice for workshop planners Select the AH6225 grade when a balance between sharpness and wear resistance is needed for a range of stainless steels under fluctuating operating conditions. Matching the insert’s square 12 mm size and tolerance to the holder specification avoids seating errors and improves repeatability. For mixed production lots or frequent tool changes, the combination of PVD-coated surface and double-sided economy supports high process uptime and straightforward stock management. For precise stainless steel turning with Tungaloy’s AH6225 grade, contact Metav Werkzeuge for tailored application advice or to order the SNMG120404 insert; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947324 Manufacturer SKU: TUN6947324 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Type: SNMG120404 AH6225 Tungaloy‑indexable insert Facts Corner radius: 0.4 mm Insert size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Seating angle: 90° Hole: with cylindrical hole Special features Material: carbide Coating: PVD‑coated (AH6225) Geometry: square, double‑sided Application: turning (external and internal) Indexable insert compatible with ISO holders Designed for medium machining and variable conditions FAQ What materials is the insert suitable for? The SNMG120404 AH6225 insert is designed primarily for machining stainless steel; the PVD‑coated carbide offers improved resistance to heat and adhesion typical of these alloys. How many usable edges does the insert provide? This square, double‑sided insert provides multiple indexing positions, offering economical use of each insert before disposal. What determines compatibility with a toolholder? Compatibility is defined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO geometry of this insert aligns with standard holders when these parameters match. Does the 0.4 mm corner radius limit profile capability? The 0.4 mm corner radius balances profile precision and edge strength, allowing accurate small‑radius features without excessive chipping risk. Is the insert suitable for internal turning as well as external turning? Yes, the insert’s ISO geometry and cylindrical hole allow use in appropriate boring bars for internal turning, provided the holder matches the insert’s dimensions and tolerance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of an AH6225 PVD-coated carbide grade for reliable performance on stainless steels and the ISO SNMG120404 geometry for simple integration into standard turning systems; order the inserts or request application advice from Metav Werkzeuge for seamless production support. SNMG120404 AH6225 Tungaloy turning insert — ISO SNMG for turning, 12 mm, 0.4 mm radius SNMG120404 AH6225 Tungaloy insert is an ISO-standard indexable turning insert engineered for external and internal turning tasks, optimised for medium machining of stainless steels. ISO SNMG 120404 geometry for standard holders PVD-coated carbide AH6225 for stainless steel Sharp yet stable cutting edge for medium cuts Double-sided chipbreaker, 0.4 mm corner radius Reliable cutting performance for stainless steels The insert delivers consistent results on stainless steels thanks to the PVD-coated carbide grade AH6225, which balances a sharp cutting edge with sufficient edge stability for variable cutting conditions. The coating improves wear resistance and helps maintain a stable cutting edge across medium turning operations, reducing the frequency of tool changes and supporting a predictable process window. In practical terms, this means fewer interruptions to production and steadier component quality when machining corrosion-resistant alloys. ISO compatibility and system integration that simplifies tooling decisions Designed to ISO SNMG dimensions, the insert matches commonly used insert pockets when the holder’s form, clearance angle, tolerance class, fastening and thickness align correctly. Key geometric data such as 12 mm inscribed circle, 4.76 mm thickness, 0.4 mm corner radius and a 0° clearance angle enable straightforward selection of matching external holders or boring bars. The insert’s cylindrical hole and double-sided chipbreaker facilitate secure clamping and economical use of both cutting edges, making it an efficient choice for established turning tool systems. Process reliability and productivity benefits When selected with a chipbreaker and grade appropriate to the workpiece and machining stability, the insert supports repeatable surface finish and dimensional control. The AH6225 grade is formulated to cope with the typical demands of medium turning in stainless steels, offering a compromise between wear resistance and edge toughness that helps avoid premature flank wear or edge chipping under interrupted cuts. The standardised form and clear dimensional data reduce setup time and simplify tool inventory management, contributing to smoother shop-floor workflows and consistent throughput. Contact Metav Werkzeuge for technical advice and availability of SNMG120404 AH6225 inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6947288-Tungaloy Manufacturer SKU: TUN6947288 Material: Hartmetall Model series: ISO-Drehwendeschneidplatten Facts Size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included hole: with cylindrical hole Insert form: square (SNMG) Special features Coating: PVD Grade: AH6225 Chipbreaker: double-sided Typical application: external and internal turning Optimised for: stainless steels Compatibility: ISO-standard holders and boring bars FAQ What materials is the SNMG120404 AH6225 insert suitable for? The SNMG120404 AH6225 insert is optimised for machining stainless steels, with the AH6225 PVD-coated carbide grade designed to deliver a balanced combination of edge sharpness and stability for medium turning applications. Which toolholders are compatible with this ISO insert? Compatibility depends on holder geometry and dimensions; the insert follows ISO SNMG standards, so holders matching SNMG form, thickness (4.76 mm) and fastening style will be suitable for secure clamping and correct tool positioning. What are the key geometric specifications of the insert? Key data for the SNMG120404 AH6225 insert are: 12 mm inscribed circle, 4.76 mm thickness, 0.4 mm corner radius and a 0° clearance angle, together with a cylindrical hole and a double-sided chipbreaker. What advantages does the AH6225 grade provide in practice? The AH6225 grade offers a PVD-coated carbide solution that keeps a sharp cutting edge while providing wear resistance and edge stability, which is beneficial for medium turning operations on corrosion-resistant alloys. Is the insert reversible or designed for multiple edge use? The insert features a double-sided chipbreaker and a standardised mounting hole, enabling economical use of both faces within the constraints of the holder and clamping system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide and a robust 0.4 mm corner radius for reliable performance in demanding turning operations; order directly via Metav Werkzeuge or consult our advisors for application support. SNMG 120404 AH6235 Tungaloy — Turning insert for ISO turning with PVD-coated carbide and 0.4 mm radius The SNMG120404 AH6235 Tungaloy is an ISO-standard square turning insert, designed for external and internal turning where interrupted cuts or workhardening materials require a tougher grade and stable chip control. PVD-coated carbide grade AH6235 for rostfreier Stahl 0.4 mm corner radius for versatile turning Double-sided chipbreaker with cylindrical hole ISO SNMG120404 square insert, 12 mm size Consistent cutting performance on rostfreier Stahl and difficult jobs The combination of a PVD-coated surface and the AH6235 grade provides a durable cutting edge optimised for rostfreier Stahl and conditions prone to edge breakout. The coating reduces built-up edge and heat uptake, while the tougher substrate improves resistance to chipping during interrupted engagement. For shops that require reproducible results, this configuration delivers longer intervals between indexings and fewer unplanned tool changes, contributing to a more predictable production rhythm. Easy integration into ISO tool systems and predictable geometry As an ISO SNMG120404 square insert with a nominal 90° approach angle and 4.76 mm thickness, the insert mates with standard external holders and boring bars when form, clearance angle, tolerance class, fastening method, size and thickness are matched. The cylindrical hole and double-sided chipbreaker support secure clamping and allow both economical indexings. Clear specification of these parameters simplifies holder selection and reduces set-up time, enabling straightforward replacement within existing tool systems. Improved productivity through geometry and chip control The insert’s double-sided chipbreaker and modest 0.4 mm corner radius balance strength and finish: stable chips, controlled breakage and consistent surface quality on both roughing and finishing passes. Because the grade is optimised for interrupted cuts, fewer edge failures occur under unstable cutting conditions, leading to improved uptime and enhanced process reliability. Selecting the appropriate chipbreaker and matching the grade to the workpiece material streamlines cycle times and supports cost-effective machining across a broad range of turning tasks. For application advice or to secure the Tungaloy AH6235 insert for demanding rostfreier Stahl turning, contact Metav Werkzeuge via eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and logistics Technical data Article number: 6888978 Manufacturer SKU: TUN6888978 Manufacturer item number: 6888978 Manufacturer: Tungaloy Numbers / Core technical data ISO designation: SNMG120404 Corner radius: 0.4 mm Size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Included angle: 90° Special features / Versions Material: carbide (hardmetal) Coating: PVD-coated Grade: AH6235 (tough grade for rostfreier Stahl) Chipbreaker: double-sided Hole: with cylindrical hole Plate form: square Application: external and internal turning; suited to interrupted cuts FAQ What materials is this insert best suited for? The AH6235 grade is formulated for machining rostfreier Stahl and other materials where toughness and resistance to edge breakout are required; the PVD-coated carbide further supports performance under elevated temperatures. How does the insert mount in a holder? The SNMG120404 designation, cylindrical hole and standard geometry allow mounting in compatible ISO external holders or boring bars, provided the holder matches form, clearance angle, tolerance and thickness. How many usable cutting edges are available per insert? With a double-sided design and square form, several indexing positions are available; typical usage maximises edge life by rotating to fresh corners as wear dictates. Which features reduce the risk of chipping during interrupted cuts? The combination of a tougher AH6235 substrate, PVD-coated surface and a modest 0.4 mm corner radius gives enhanced edge stability and improved resistance to chipping in interrupted or unstable cutting conditions. Is the insert compatible with standard ISO SNMG tool holders? Yes; the SNMG120404 specification conforms to ISO geometry, but compatibility depends on matching the holder’s tolerance class, fastening and thickness parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6235 Wendeplatten - Tungaloy
Robust PVD-coated carbide performance meets ISO compatibility and stable chip control; the combination of AH6235 grade, a 0.4 mm nose radius and double-sided geometry supports reliable turning in demanding stainless-steel work and interrupted cuts. Order the SNMG120404 AH6235 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120404 AH6235 ISO turning insert for turning — Tungaloy The SNMG120404 AH6235 is an ISO-format turning insert designed for external and internal turning, offering enhanced chip control and improved resistance to edge breakout in stainless steels. ISO SNMG format, compatible with standard holders PVD-coated AH6235 grade for stainless steel 0.4 mm nose radius for fine finishing Double-sided design with cylindrical hole for secure clamping Consistent performance on stainless steels and interrupted cuts The insert combines a PVD-coated surface with a tough carbide substrate to balance wear resistance and edge stability. This AH6235 grade is formulated for machining stainless steel, particularly where intermittent cutting or risk of chipping exists; the tougher matrix reduces flank and crater wear while the coating helps prevent built-up edge. The result is more consistent surface quality and fewer index changes, which supports higher effective productivity on mixed-production batches. Straightforward integration into ISO turning systems The geometry follows the ISO SNMG specification, so compatibility with established external holders and boring bars is determined by form, relief angle, tolerance class, clamping method and plate thickness. The cylindrical hole and 90° table angle ensure reliable clamping and repeatable seating in standard toolposts. This indexable design, being double-sided, doubles the available cutting edges per insert and simplifies tool management in the shop. Measurable benefits for process reliability and economy With a 0.4 mm nose radius and a plate thickness of 4.76 mm, the insert supports fine finishing and stable cutting when combined with appropriate feeds and speeds. The combination of grade and chipbreaker yields improved chip control, reducing downtime from clogging and rework. By extending edge life and lowering the frequency of insert changes, the geometry and coating contribute to a shorter cost-per-part and steadier production flow in series and jobbing environments. For reliable turning in stainless steels, contact Metav Werkzeuge to order the Tungaloy SNMG120404 AH6235 insert or request specialist advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6888983 SKU: 6888983-Tungaloy Manufacturer SKU: TUN6888983 Model series: ISO turning insert series Designation: SNMG120404 AH6235 Core specifications Insert size: 12 mm Plate thickness: 4.76 mm Nose/corner radius: 0.4 mm Relief (clearance) angle: 0° Diamond included angle: 90° Hole: with hole (cylindrical) Special features Material: carbide Coating: PVD Grade: AH6235 Chipbreaker: double-sided Typical application: external and internal turning Suited for: stainless steels and interrupted cuts Compatibility: ISO holders; clamping determined by form and tolerance FAQ What materials is this insert best suited for? The SNMG120404 AH6235 insert is optimised for stainless steel machining, especially where interrupted cuts or higher breakout risk occur; the AH6235 grade balances toughness and wear resistance. How many usable edges does the insert provide? As a double-sided SNMG insert, it provides multiple indexable cutting edges per plate, extending run lengths between tool changes and reducing tool costs. Is the insert compatible with standard ISO SNMG holders? Yes, the insert follows the SNMG ISO geometry; compatibility depends on holder form, relief angle and clamping method but it is intended for standard external and internal turning holders. What does the PVD coating deliver in practice? The PVD coating enhances surface hardness and reduces friction at the cutting edge, improving wear resistance and reducing adhesion tendencies when machining stainless steels. Can this insert be used for finishing operations? With a 0.4 mm nose radius and stable edge properties, the plate is well suited for fine finishing passes when appropriate feeds and cutting conditions are chosen. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6235 Wendeplatten - Tungaloy
Benefit from robust cutting performance, reliable chip control and consistent ISO compatibility for a productive turning process; order the SNMG 120404 AH6235 insert directly via Metav Werkzeuge or ask our consultants for application support. SNMG 120404 AH6235 PVD-coated indexable turning insert — Tungaloy SNMG120404 AH6235 is an ISO‑compliant square insert engineered for external and internal turning, optimised for stainless steels and interrupted cuts with a cylindrical hole and a 0° clearance angle PVD-coated carbide for stainless steel applications Square ISO insert SNMG with 0.4 mm corner radius Double-sided chipbreaker for interrupted cuts Cylindrical-hole insert, 4.76 mm thickness Better cutting results on stainless steels and demanding cuts The PVD-coated grade offers a balanced combination of wear resistance and toughness: the AH6235 formulation is designed to reduce chipping during unstable engagement and to withstand the work-hardening tendency of stainless steels. As a result, the indexable plate maintains edge integrity for longer periods, which translates into fewer tool changes and more predictable cycle times. The coating reduces friction at the cutting edge, helping to control built-up edge and improving surface finish on parts that are sensitive to thermal and mechanical effects. Consistent process control through ISO conformity and secure clamping The insert follows ISO geometry and dimensions, making system compatibility straightforward when paired with the correct holder. Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; ensuring the right match preserves the insert seat and enables repeatable clamping forces. The square configuration with a 90° included angle supports robust axial and radial engagement, while the 0° clearance angle is suitable for many external turning set-ups. Using an appropriate, ISO-mating holder keeps cuts stable and minimises vibration, which benefits both accuracy and component quality. Efficient handling and economic machining for production environments The double-sided chipbreaker and modest 0.4 mm corner radius provide a pragmatic balance between edge strength and profile control, especially in interrupted operations. With a plate thickness of 4.76 mm, the insert offers solid support under load and contributes to extended tool life through a stable seating area. The double-sided chipbreaker design allows indexation to a fresh cutting edge, lowering overall tooling cost per part. For best results, pair the plate with a holder and clamping set that match its dimensions and select cutting parameters mindful of material tendencies to achieve both productivity and component integrity. For reliable machining with the AH6235 grade, contact Metav Werkzeuge for tailored advice or to secure supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6887607 Manufacturer SKU: TUN6887607 SKU: 6887607-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 12 mm Clearance angle: 0° Included angle: 90° Special features ISO designation: SNMG120404 Grade/coating: AH6235, PVD-coated carbide Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Intended application: turning Optimised for: stainless steels and interrupted cuts FAQ Which materials is this insert best suited for? The SNMG 120404 AH6235 insert is optimised for stainless steels and performs well in applications with interrupted cuts or elevated breakout risk. Is the insert compatible with standard ISO holders? Yes. The SNMG120404 conforms to ISO geometry; compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness. What advantages does the AH6235 grade provide? The AH6235 PVD-coated carbide offers enhanced edge toughness and wear resistance for machining stainless steels, reducing the risk of chipping during unstable engagements. How does the chipbreaker support machining performance? The double-sided chipbreaker is designed for interrupted cuts and improves chip control, contributing to stable cutting conditions and better surface quality. What are the key geometric specifications to note? This square insert has a 90° included angle, a 0.4 mm corner radius and a plate thickness of 4.76 mm; it features a cylindrical hole for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH6235 toughness and the ISO SNMG120404 form for reliable turning performance in demanding operations; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SNMG 120404 AH6235 ISO turning insert for Drehen — Tungaloy SNMG120404 AH6235 Tungaloy insert designed for ISO‑standard external and internal turning with enhanced resistance to chipping and interrupted cuts ISO SNMG120404 geometry PVD-coated AH6235 grade Double-sided chipbreaker 0.4 mm corner radius Increased productivity through stable cutting performance The PVD-coated carbide grade AH6235 delivers a balance of toughness and wear resistance that is particularly beneficial for machining stainless steels and other difficult‑to‑cut alloys. The coating promotes improved edge retention under variable loads, which reduces the frequency of index changes and supports a steadier production rhythm. Where interruptions or heavy feed variations occur, the tougher substrate and coating combination helps maintain cutting integrity and avoid premature edge failure, improving overall throughput. Predictable chip control and surface quality A double-sided chipbreaker combined with the SNMG geometry offers consistent chip formation and evacuation in both external and internal turning. The 0.4 mm corner radius supports robust edge strength while producing acceptable surface finishes in semi‑finishing and finishing passes. Operators unfamiliar with the terminology: the chipbreaker is the small groove on the insert face that shapes chips to prevent entanglement and aid coolant flow — this feature directly contributes to safer, cleaner machining and fewer interruptions on the shop floor. Simple compatibility and secure clamping Compatibility with existing toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness. The square SNMG120404 shape and 4.76 mm plate thickness make the insert suitable for a wide range of standard ISO external holders and boring bars that accept SNMG‑type cartridges. The insert comes with a cylindrical hole for positive indexing and secure clamping, helping to ensure repeatable seating and stable cutting across multiple tool changes. Application guidance for interrupted cuts and tough alloys For applications involving abrupt interruptions or a risk of edge breakout, the AH6235 grade's toughness reduces chipping and extends usable life, particularly when machining rostfreie Stähle and other alloys prone to work hardening. Select cutting speeds and feeds that favour moderate cutting temperatures to exploit the grade's balance between wear resistance and fracture toughness; this approach minimises thermal shock and supports consistent performance across batch runs. Discuss specific machining parameters or request the Tungaloy SNMG120404 AH6235 insert from Metav Werkzeuge for tailored advice and rapid supply Technical data Article number: 6888984 Manufacturer SKU: TUN6888984 Manufacturer item no.: 6888984-Tungaloy Manufacturer: Tungaloy Facts ISO designation: SNMG120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° Hole: with hole Hole style: cylindrical hole Special features Material: carbide Grade/coating: AH6235, PVD-coated Plate form: square Chipbreaker: double-sided Intended use: turning Typical system: insert, compatible outside holder or boring bar, shim/locking set and replacement screw FAQ What materials is this insert suited for? The SNMG120404 AH6235 insert is formulated for stainless steels and other tougher alloys where a tougher, PVD‑coated carbide improves resistance to chipping. Can the insert be used for interrupted cuts? Yes, the AH6235 grade and the robust corner radius are chosen to resist breakout and maintain edge integrity during interrupted machining. Is the insert reversible and double‑sided? The insert features a double‑sided chipbreaker and is indexable to use multiple cutting edges before replacement, consistent with SNMG geometry. How is compatibility with holders determined? Compatibility depends on the insert form, relief angle, tolerance class, fastening, size and thickness; use holders specified for SNMG120404 geometry and the listed plate thickness. What advantage does the PVD coating provide? The PVD coating enhances wear resistance and edge life while maintaining toughness, helping to deliver consistent results in production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120404 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 carbide and a 0.4 mm corner radius to achieve reliable edge life and consistent surface finish in turning operations. The ISO‑standard form and 90° geometry simplify holder selection and reduce setup time. Order directly via Metav Werkzeuge or consult the team for tailored machining advice. SNMG120404 AH8015 ISO turning insert for Drehen – Tungaloy The SNMG120404 AH8015 is an ISO-standard square turning insert optimised for external and internal turning of heat‑resistant alloys and general turning tasks SNMG120404 ISO square turning insert PVD-coated carbide grade AH8015 0.4 mm corner radius for fine finishes Double-sided design; 90° cutting angle Consistent edge performance for demanding alloys The insert delivers balanced wear resistance and edge stability thanks to the PVD-coated AH8015 grade on cemented carbide. This combination reduces flank wear under elevated temperatures, which translates into longer tool life and fewer indexings per workpiece batch. The modest 0.4 mm corner radius supports improved surface quality without compromising the capability to handle interrupted cuts; the small radius helps maintain dimensional accuracy while preserving cutting edge integrity. Explanation of terms: a PVD coating is a thin, hard layer deposited on the substrate to improve thermal resistance and reduce adhesive wear during high‑temperature cutting. ISO compatibility reduces setup complexity and inventory costs Designed to the SNMG120404 ISO specification, the insert fits common external holders when form, relief angle, tolerance, fastening, size and thickness match the toolholder. The 90° cutting angle and square shape make the component well suited for shoulder turning and general profiling, allowing a single geometry to cover multiple operations. The double‑sided design offers economical indexing and consistent repeatability, so shops benefit from predictable tool life and simplified stock management. The standardised format also eases qualification of cutting parameters across machines and operators. Improved chip control and productive turning cycles The insert features a double‑sided chipbreaker and a cylindrical centre hole for secure clamping, supporting stable chip formation and evacuation during continuous and semi‑continuous cuts. This results in higher process stability, fewer interruptions for chip clearing and better surface finish in one pass. The combination of PVD coating and robust carbide substrate permits efficient machining of heat‑resistant alloys typical in aerospace or power generation components, while still offering sensible performance on common steels and alloyed materials. For complex materials or special cycle requirements, supply the machining parameters to Metav Werkzeuge for optimisation support; telephone and email contact details are available for additional technical consultation. Contact Metav Werkzeuge to discuss how the Tungaloy SNMG120404 AH8015 insert can be integrated into existing turning operations and to arrange procurement or technical advice Technical data Article number: 6947318 Manufacturer SKU: TUN6947318 SKU: 6947318-Tungaloy Manufacturer: Tungaloy Facts ISO designation: SNMG120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Cutting angle: 90° Double-sided insert Special features Material: cemented carbide Coating: PVD; grade AH8015 Shape: square Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning (external and internal) Series: ISO turning inserts FAQ What materials is this insert suitable for? The SNMG120404 AH8015 insert is formulated for machining heat‑resistant alloys and performs well on a wide range of steels and alloyed materials thanks to its PVD coating and cemented carbide substrate. Can the insert be used on standard SNMG holders? Yes. The SNMG120404 conforms to ISO geometry; compatibility depends on matching form, relief angle, tolerance, fastening, size and thickness for the specific holder. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm radius provides a balance between strength and finish quality; it helps to produce finer surface finishes while maintaining edge stability during turning operations. Is the insert indexable and cost-effective? The double‑sided SNMG120404 design allows indexing to a fresh cutting edge, which reduces tooling costs per component and improves process economy. What is the benefit of the PVD coating on AH8015? The PVD layer enhances thermal resistance and reduces adhesive wear, which is particularly advantageous when machining elevated‑temperature alloys with demanding cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced combination of PVD-coated AH8015 carbide and consistent geometry for reliable production results; the insert delivers predictable tool life and stable chip control. Order directly via Metav Werkzeuge or consult the technical team for grade and chipbreaker selection. SNMG120404 AH8015 – ISO turning insert (PVD-coated carbide, 0.4 mm radius) by Tungaloy The SNMG120404 AH8015 is an ISO-standard turning insert for external and internal turning, designed for machining heat-resistant alloys with a balance of wear resistance and cutting-edge stability ISO square SNMG geometry, 12 mm size PVD-coated carbide AH8015 for heat-resistant alloys 0.4 mm corner radius ensures consistent edge strength Double-sided insert with cylindrical hole, 4.76 mm thick Predictable performance from PVD-coated AH8015 carbide The combination of a PVD-coated surface and the AH8015 grade provides a measured balance between wear resistance and cutting-edge stability, making it suitable for serial turning of heat-resistant alloys where consistent life and part quality are priorities. The coating reduces flank wear at elevated temperatures while the substrate delivers fracture resistance, which translates into fewer unplanned tool changes and more stable cycle times. This performance-oriented pairing supports cost-efficiency in production by extending effective tool life without sacrificing surface quality. Consistent geometry for repeatable machining results A square ISO geometry with a 0.4 mm corner radius and a 12 mm seat size produces predictable cutting behaviour and robust edge strength during interrupted cuts and general turning operations. The double-sided design maximises usable cutting edges per insert, improving economy per index, while the cylindrical hole and standard thickness ensure secure clamping and repeatable positioning in compatible holders. Together, these features reduce set-up variance and contribute to reproducible surface finish and dimensional stability across batches. Simple integration into ISO holder systems and flexible application Compatibility with ISO-style turning systems is determined by form, free angle, tolerance class, attachment method, size and thickness; the insert is supplied in the industry-standard SNMG format to simplify holder matching. The dual-sided chipbreaker concept allows selection of the appropriate chip control for workpiece material and machining stability, so one insert design can cover a range of turning tasks. This flexibility reduces the number of specialised grades required in the tool crib and streamlines tool management in mixed-production environments. Practical economy and process security for production shops In production contexts where cycle time and reproducibility matter, the grade and construction deliver measurable benefits: lower frequency of tool changes, consistent part finishing, and improved process security under higher cutting temperatures. The balanced properties encourage stable cutting data and predictable wear curves, which supports planning for tool consumption and contributes to overall productivity. For operations handling heat-resistant alloys, the insert offers a cost-effective route to maintain surface quality and machining reliability. For sample orders, grade recommendations or to confirm holder compatibility for the SNMG120404 AH8015 insert, contact Metav Werkzeuge for technical advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6947327 Manufacturer SKU: TUN6947327 Vendor SKU: 6947327-Tungaloy Name: SNMG120404 AH8015 Tungaloy insert Model series: ISO turning inserts Material: carbide Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Free angle: 0° Seat angle: 90° Features / Applications Square plate geometry (SNMG) Double-sided chipbreaker Cylindrical mounting hole PVD-coated grade AH8015 Designed for external and internal turning Suited to heat-resistant alloys ISO-standard compatibility with matching holders FAQ Which materials is this insert best suited for? The SNMG120404 AH8015 insert (Tungaloy, SKU 6947327-Tungaloy) is intended primarily for heat-resistant alloys and general turning tasks where a balance of wear resistance and edge stability is required. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge strength and helps resist chipping during interrupted cuts; it also influences achievable surface finish and should be matched to feed and cutting conditions. Is the insert indexable and how many usable edges are available? The insert is double-sided and indexable, offering multiple usable cutting edges per insert to improve economy and reduce tooling frequency. What determines holder compatibility for this SNMG insert? Compatibility is defined by insert form, free angle, tolerance class, attachment style, size and thickness; matching an ISO SNMG holder ensures correct seating and clamping. Which chipbreaker should be chosen for stable cutting? The double-sided chipbreaker on this insert provides general-purpose chip control; for optimal results, select the chipbreaker variant that matches workpiece material, machining strategy and machine stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH8015 for balanced wear resistance and a 0.4 mm corner radius for predictable chip control, ensuring consistent turning of heat‑resistant alloys. Order the inserts directly via Metav Werkzeuge or ask our consultants for application support. SNMG120404 AH8015 turning insert (ISO SNMG120404) — PVD-coated carbide by Tungaloy SNMG120404 AH8015 is an ISO‑compliant indexable insert designed for general turning of heat‑resistant alloys and similar demanding materials ISO SNMG120404 form for holder compatibility PVD-coated carbide grade AH8015 for heat-resistant alloys Double-sided chipbreaker for versatile turning 0.4 mm corner radius for controlled chip formation Consistent cutting performance for heat‑resistant alloys The combination of a PVD-coated surface and a wear‑resistant carbide substrate in grade AH8015 delivers a balance between edge stability and abrasive resistance, which is particularly relevant when machining titanium alloys and other heat‑resistant materials. This balance reduces flank wear during extended cuts, leading to more predictable tool life and fewer interruptions for tool changes. For production environments seeking repeatable results, the controlled wear behaviour translates directly into reduced process variability and more reliable surface quality. Secure fit and straightforward system integration The square, ISO‑formed design ensures compatibility with standard turning toolholders; the form, relief angle and tolerance class determine correct seating and clamping. The ISO SNMG120404 geometry with a cylindrical central hole and a 0° relief angle provides positive location and secure fastening in indexable holders and boring bars. This standardisation simplifies tool inventory and shortens set‑up times, so machining centres and turning lathes can be reconfigured quickly for batch changes without compromising clamping stability. Effective chip control and improved surface finish A double‑sided chipbreaker combined with a 0.4 mm corner radius produces short, controllable chips and supports steady cutting forces in both light finishing and more aggressive roughing passes. The moderated corner radius helps to avoid sudden edge chipping while offering sufficient strength for interrupted cuts. As a result, cycle times can be optimised without sacrificing surface integrity, and secondary operations such as polishing or inspection are less likely to be required. Practical application guidance and compatibility notes Intended primarily for external and internal turning, the insert performs best when matched with a holder that complements the SNMG geometry and the chosen grade AH8015. Select the chipbreaker and specific grade as a function of workpiece material, cutting parameters and machine stability. If process parameters or material properties are uncertain, technical consultation is recommended to determine cutting speeds and feeds that maximise both productivity and tool life; Metav Werkzeuge can provide tailored advice and material‑specific recommendations. For supplementary technical data, please refer to the specifications below or contact the technical team. Contact Metav Werkzeuge today for advice on integrating the SNMG120404 AH8015 insert into production or to request detailed cutting parameter recommendations from our specialists Technical data Article number: 6947289 Manufacturer SKU: TUN6947289 SKU: 6947289-Tungaloy Facts Corner radius: 0.4 mm Plate size: 12 mm Thickness: 4.76 mm Relief angle: 0° Insert angle: 90° Hole: cylindrical Special features Grade: AH8015 Substrate: PVD‑coated carbide Chipbreaker: double‑sided Plate form: square Application: turning (external and internal) System: ISO‑compliant indexable insert FAQ Is this insert suitable for turning heat‑resistant alloys? Yes. The SNMG120404 AH8015 insert from Tungaloy is specifically formulated for the general machining of heat‑resistant alloys, combining PVD coating and a wear‑resistant carbide substrate for improved edge life. Can the insert be used for both external and internal turning? Yes. The SNMG geometry and double‑sided chipbreaker enable use in both external and internal turning operations when paired with a compatible holder. What benefits does the AH8015 grade provide? AH8015 offers a balance of wear resistance and edge stability, making the grade a first choice for many applications where heat and abrasion are factors. How does the 0.4 mm corner radius affect performance? A 0.4 mm radius supports controlled chip formation and improved edge strength, helping to prevent chipping during interrupted cuts and supporting a better surface finish. Is the SNMG120404 compatible with standard ISO holders? Yes. The insert follows ISO dimensions and fits holders designed for the SNMG120404 form; correct seating depends on matching form, relief angle and tolerance class. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930
SNMG 120404 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced wear resistance and edge stability of the PVD-coated AH8015 grade combined with the ISO SNMG120404 geometry for dependable turning of heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for material‑specific recommendations. SNMG120404 AH8015 Tungaloy indexable turning insert — ISO standard, PVD‑coated The SNMG120404 AH8015 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a balanced combination of wear resistance and cutting‑edge stability for demanding alloys. ISO SNMG120404 standard insert PVD‑coated carbide AH8015 Double‑sided chipbreaker design Cylindrical hole with secure seating Reliable cutting performance for heat‑resistant alloys The AH8015 grade is a PVD‑coated carbide developed as a first choice for general machining of heat‑resistant alloys, delivering a compromise between wear resistance and edge stability. In continuous turning operations this translates into steadier cutting forces and more predictable tool life, which reduces unplanned tool changes and improves throughput. The insert’s double‑sided chipbreaker supports controlled chip formation, lowering the risk of chip entanglement and contributing to consistent surface finish on workpieces. Predictable compatibility and secure clamping for efficient setup The ISO designation SNMG120404 guarantees dimensional compatibility with ISO holders when matching form, tolerance class, fastening and thickness. The insert is supplied in a square 12 mm size with a thickness of 4.76 mm, a corner radius of 0.4 mm and a 0° clearance angle; the cylindrical hole ensures reliable seating and repeatable location in the pocket. Together these attributes shorten set‑up time, maintain axial and radial position under load and simplify regrind or replacement procedures, supporting higher machine uptime and repeatable part quality. Optimise process stability and tool life with a system approach Made from carbide and finished with a PVD layer, this insert is intended for productive turning in systems that include a matching holder, underlay and clamping set. Selecting the correct chipbreaker and grade for the workpiece material helps to reduce cutting temperatures and wear, while the robust cutting edge promotes stable cutting at higher feed rates. For medium‑ to long‑run production, the combination of coating, geometry and secure fastening supports cost‑effective operation through fewer interventions and consistent dimensional results. Contact Metav Werkzeuge to discuss application‑specific setups for the Tungaloy SNMG120404 AH8015 insert or to request cutting data for particular alloys — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Manufacturer article number: 6951014 Manufacturer SKU: TUN6951014 SKU: 6951014-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Carbide Core data ISO designation: SNMG120404 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Insert angle: 90° Design & special features Grade: AH8015 (PVD‑coated) Double‑sided chipbreaker Cylindrical hole Square form For turning (external and internal) Compatible with ISO holders FAQ What materials is this insert best suited for? The SNMG120404 AH8015 insert is optimised for heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for typical high‑temperature materials. Can the insert be used for both external and internal turning? Yes, the ISO‑format indexable insert is designed for both external and internal turning applications when mounted in a compatible holder. How does the double‑sided chipbreaker improve machining? The double‑sided chipbreaker on the SNMG120404 promotes consistent chip control, reducing the risk of chip entanglement and improving surface finish stability. What dimensions are important when checking holder compatibility? Key dimensions are the ISO designation, size (12 mm), thickness (4.76 mm), corner radius (0.4 mm) and the presence of the cylindrical hole for correct seating. Is the AH8015 coating suitable for interrupted cuts? The PVD‑coated AH8015 grade offers a good balance of toughness and wear resistance; it can be applied for interrupted cuts depending on workpiece material and cutting parameters. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of proven PVD-coated carbide AH8015, ISO-conformity and a compact square geometry for stable, cost-effective turning of heat-resistant alloys; order original Tungaloy inserts directly via Metav Werkzeuge or consult the team for application-specific cutting data. SNMG 120404 AH8015 turning insert — ISO 120404, PVD-coated carbide, 90° SNMG 120404 AH8015 is an ISO-standard square indexable insert designed for general external and internal turning, offering a balanced mix of wear resistance and cutting-edge stability for heat-resistant alloys. ISO 120404 square insert, 90° cutting angle PVD-coated AH8015 cemented carbide Double-sided with 0.4 mm corner radius Compatible with standard SNMG holders High-performance cutting for heat-resistant alloys The PVD-coated carbide AH8015 grade provides a deliberate balance between wear resistance and edge stability, making the insert especially suited to the general machining of heat-resistant alloys. The PVD layer increases surface hardness and thermal resistance while preserving toughness at the cutting edge; this helps to maintain dimensional accuracy over longer tool life. Stable chip formation and consistent flank wear translate into fewer interruptions and a smoother production flow, which supports predictable cycle times and lower overall machining costs. Precise geometry and reliable clamping for repeatable results The component complies with ISO SNMG120404 dimensions and presents a square 12 mm form with a 90° cutting angle, providing straightforward positioning for shoulder and profile turning. The 0.4 mm corner radius yields a compromise between edge strength and achievable surface finish, while the double-sided design multiplies available cutting edges for economical usage. A cylindrical hole and a plate thickness of 4.76 mm ensure secure fixation in compatible holders; compatibility is determined by insert shape, clearance angle, tolerance class, attachment method and thickness, so correct holder selection is essential for repeatable, vibration-free machining. Practical guidance to get productive cuts quickly Designed for both external turning and internal turning, the insert performs best when matched with the appropriate chipbreaker and cutting data for the workpiece alloy. The double-edged format and ISO conformity make it straightforward to stock and replace, reducing setup time and simplifying inventory management. For applications where thermal load and abrasive wear are concerns, the combination of the PVD layer and the cemented-carbine substrate supports longer tool life and consistent surface quality. For tailored recommendations on feeds, speeds and chipbreaker selection, Metav Werkzeuge provides application support and technical data to help integrate the insert into existing tool systems. Contact Metav Werkzeuge for application-specific cutting parameters and secure authentic Tungaloy SNMG120404 AH8015 inserts to ensure predictable performance and stock availability Technical data Article number: 6947296 Manufacturer SKU: TUN6947296 Our SKU: 6947296-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Dimensions & numbers Corner radius: 0.4 mm Cutting angle: 90° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Features & applications Coating: PVD Grade: AH8015 Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning (external and internal) FAQ What materials is this insert best suited for? This insert, specified as SNMG 120404 AH8015, is primarily intended for general machining of heat-resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. How many cutting edges are available per insert? The double-sided SNMG geometry provides multiple usable edges; the exact number depends on the indexing pattern, but the design is intended for economical edge rotation. Which toolholder features are critical for correct fit? Compatibility requires a matching SNMG-style holder that corresponds to the insert form, 90° geometry, thickness and clamping method; correct tolerance class and clearance must also be observed. Does the coating improve thermal resistance? Yes, the PVD coating increases surface hardness and thermal resistance while maintaining edge toughness, contributing to longer life under heat-generating cuts. Is this insert suitable for finishing passes? With its 0.4 mm corner radius and balanced grade, the insert can be used for light finishing when combined with appropriate feeds and speeds and the right chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH8015 Wendeplatten - Tungaloy
The PVD‑coated AH8015 cemented carbide insert pairs wear resistance with cutting‑edge stability and a 0.4 mm corner radius for steady surface finish and extended tool life; order via Metav Werkzeuge or contact our consultants for holder compatibility. SNMG 120404 AH8015 – ISO turning insert, PVD‑coated carbide (Tungaloy) SNMG120404 AH8015 is an ISO‑normed square indexable turning insert designed for external and internal turning, optimised for the general machining of heat‑resistant alloys. PVD-coated cemented carbide grade AH8015 0.4 mm corner radius for consistent surface finish Suitable for heat‑resistant alloys and general turning Double-sided chipbreaker with cylindrical hole High‑temperature performance with balanced wear and edge stability The SNMG120404 AH8015 insert uses a PVD coating paired with cemented carbide to achieve a balance between wear resistance and cutting‑edge stability. This composition makes the insert particularly suitable for machining heat‑resistant alloys, where temperature resistance and predictable flank wear are decisive for process security. In practice, the coated grade sustains cutting forces longer and reduces the frequency of insert changes, supporting a smoother production flow and more consistent part quality. Geometry that secures finish and clamping reliability The square form with a 0.4 mm corner radius and a nominal 90° principal cutting angle delivers a controlled cutting edge for repeatable surface quality. The double‑sided chipbreaker contributes to stable chip formation and allows economical use of the insert by providing usable faces on both sides. A cylindrical hole and standardised geometry ensure secure clamping in ISO‑compatible holders; the zero‑degree relief angle promotes full‑face engagement where required. For less experienced users, a larger corner radius generally improves finish at higher feeds, while a smaller radius favours sharper detail and lighter cutting forces. Productivity and economy through reduced downtime With its balanced grade and robust coating, this insert aims to lengthen service intervals and reduce scrap caused by unpredictable wear. The AH8015 chemistry and PVD surface treatment combine to lower adhesive and abrasive wear mechanisms when machining demanding materials, which in turn reduces machine idle time and tooling costs per part. Selecting the correct chipbreaker and matching holder geometry maximises productivity gains; the standardised ISO form simplifies stock management and replacement, delivering measurable cost‑benefit in continuous production environments. ISO compatibility and practical integration into existing toolsets As an ISO‑normed indexable plate, the insert is compatible with holders that match the ISO 120404 geometry by form, free clearance, tolerance class, fastening method, size and thickness. The system comprises the ISO plate, a suitable external holder or boring bar, and the necessary backing and clamping sets. If holder matching or process parameters require clarification, Metav Werkzeuge provides technical consultation and can advise on optimal holder selection, clamping sets and cutting data to suit the specific material and machining strategy. Contact Metav Werkzeuge for tailored advice on holder compatibility and to procure the Tungaloy SNMG120404 AH8015 insert for robust machining of heat‑resistant alloys; technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6947273 SKU: 6947273-Tungaloy Manufacturer SKU: TUN6947273 Model series: ISO‑turning inserts Label: SNMG120404 AH8015 Tungaloy‑insert Core measurements Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Principal angle: 90° Relief (free) angle: 0° Materials & special features Material: cemented carbide (Hartmetall) Coating: PVD Grade: AH8015 Shape: square (quadratic) Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) System: ISO‑normed indexable insert FAQ What materials is this insert suited for? The SNMG120404 AH8015 insert is designed as a first choice for the general machining of heat‑resistant alloys and covers a broad range of steels and alloyed materials when the AH8015 grade is appropriately matched to the workpiece. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius offers a compromise between surface finish and edge strength; it reduces the risk of edge chipping compared with finer radii while preserving good surface integrity at typical turning feeds. Is the insert compatible with standard ISO holders? Yes; the plate follows ISO geometry and is compatible with holders that match ISO 120404 by form, free clearance, tolerance class, fastening and thickness — verify holder dimensions before assembly. What advantages does the PVD coating provide? The PVD coating on the cemented carbide substrate enhances wear resistance and heat resistance, improving tool life and process stability during higher temperature cutting operations. Does the cylindrical hole affect clamping reliability? The cylindrical hole facilitates secure clamping and consistent seating in compatible clamping sets, which supports repeatable positioning and reliable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide for balanced wear resistance and edge stability, the ISO-standard form for straightforward holder compatibility, and the 0.4 mm corner radius for precise turning results; order directly via Metav Werkzeuge or consult our technical team for application advice. SNMG120404 AH8015 SNMG turning insert (Tungaloy) — PVD-coated carbide, 0.4 mm radius The SNMG120404 AH8015 is an ISO-standard indexable turning insert designed for general-purpose external and internal turning of heat-resistant alloys. ISO-compliant indexable insert PVD-coated carbide grade AH8015 0.4 mm corner radius for precision Double-sided design with cylindrical hole Consistent cutting performance for demanding alloys The combination of a PVD-coated carbide substrate and the AH8015 grade delivers a balanced mix of wear resistance and edge stability, making this insert well suited for machining heat-resistant alloys. The coating reduces adhesive wear and thermal damage during high-temperature cuts, while the carbide core maintains form stability. As a result, the insert supports longer uninterrupted production runs and fewer insert changes, which contributes to higher productivity and lower downtime in batch and serial manufacturing. Smooth integration into ISO tool systems Designed to the ISO indexable insert dimensions, the insert ensures compatibility with standard square holders and boring bars when form, clearance angle and clamping specifications match. The indexable insert is supplied with a central cylindrical hole for secure fastening and its square shape provides four usable cutting edges when indexed. Clear specifications for thickness, size and tolerance assist in selecting the correct holder and clamping set, reducing setup time and helping to maintain repeatable machining accuracy across tool changes. Practical benefits for process reliability and surface finish A 0.4 mm corner radius provides a balance between strength and finish: it improves edge robustness during interrupted cuts while enabling good surface quality on general turning operations. The double-sided design doubles the number of edges available per insert, improving cost-efficiency per cutting edge. When combined with the appropriate chipbreaker option for the chosen material and cutting conditions, the insert helps to control chip formation, decrease rework and deliver consistent part quality in production environments. Contact Metav Werkzeuge for availability of the Tungaloy SNMG120404 AH8015 insert or request application-specific recommendations from our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Manufacturer article number: 6947276 SKU (internal): 6947276-Tungaloy SKU (manufacturer): TUN6947276 Model series: ISO turning indexable inserts Material: Carbide Grade/coating: AH8015 (PVD-coated) Numbers Corner radius: 0.4 mm ISO designation: 120404 Relief angle: 0° Insert thickness: 4.76 mm Inscribed circle / size: 12 mm Included hole: with hole (cylindrical) Special features Square insert form Double-sided indexable design Cylindrical centre hole for screw fastening Suitable for external and internal turning Designed for heat-resistant alloys Balanced wear resistance and edge stability ISO-standard compatibilty with appropriate holders Chipbreaker: double-sided FAQ Which materials are best machined with this insert? The SNMG120404 AH8015 insert from Tungaloy is specified as a first choice for machining heat-resistant alloys, offering a balance of wear resistance and edge stability suitable for such materials. Is this an indexable, reusable cutting edge? Yes, the SNMG120404 AH8015 is an indexable, double-sided insert; each side provides cutting edges that can be rotated or indexed to expose a fresh edge. What does the 0.4 mm radius mean for finishing and strength? A 0.4 mm corner radius gives enhanced edge strength for interrupted cuts while maintaining the ability to achieve good surface finish in typical turning operations with the AH8015 grade. How does holder compatibility work for this insert? Compatibility depends on the insert form, relief angle, tolerance class, clamping method, size and thickness; the ISO designation 120404 helps identify matching square holders and boring bars. Can this insert be used for both external and internal turning? Yes, the insert is intended for both external and internal turning applications, provided the correct holder and chipbreaker combination is selected for the specific workpiece material and machining stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated cemented carbide grade AH8015 and ISO SNMG geometry for dependable, high-temperature alloy turning; the insert delivers a balance of wear resistance and cutting-edge stability. Order the SNMG120404 AH8015 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120404 AH8015 indexable turning insert for Turning — Tungaloy The SNMG120404 AH8015 is an ISO-standard square indexable insert designed for external and internal turning, offering a PVD-coated carbide grade optimised for heat‑resistant alloys. SNMG geometry, ISO-compliant PVD-coated carbide for heat-resistant alloys Double-sided chipbreaker, square form 0.4 mm corner radius, 90° cutting angle Consistent cutting performance from PVD-coated carbide The PVD-coated cemented carbide composition of this insert gives a reliable combination of wear resistance and edge stability that suits demanding turning operations. The AH8015 grade is described as the first choice for general machining of heat‑resistant alloys, offering a compromise between prolonged tool life and consistent cutting behaviour. PVD coating reduces edge abrasion and helps maintain a sharp profile at elevated temperatures, which results in fewer interruptions for tool changes and a more predictable production rhythm. Explaining the chemistry briefly: the coating forms a hard, thin layer that shields the carbide substrate while retaining sufficient toughness to resist chipping. This makes the insert particularly suited to operations where thermal load and abrasive wear occur together. Secure mounting and predictable fit for stable cutting Designed in the ISO SNMG format, the square insert features a 4.76 mm plate thickness, a 12 mm nominal size, a 0.4 mm corner radius, and a 90° cutting angle, plus a cylindrical centre hole for positive clamping. Compatibility with a holder depends on geometry, clearance angle, tolerance class, fastening method, size and thickness; the provided 0° clearance angle and the square form facilitate straightforward seat matching in standard external holders or boring bars. This structural consistency reduces setup time and variance between tool changes. For manufacturers seeking reproducible part quality, the predictable seating and firm clamping translate directly into tighter tolerances and less scrap, particularly when operating across shift changes or on multiple machines. Practical shop-floor advantages and application guidance The double-sided chipbreaker design provides effective chip control and two usable edges per index, improving per-insert economy without compromising surface finish. In practice, choose the chipbreaker and grade according to the workpiece material and machining stability: this insert is optimised for turning applications involving heat‑resistant alloys, where a balance between wear resistance and edge robustness is required. Using a suitable holder and the correct feed speeds will exploit the AH8015 grade’s strengths—longer uninterrupted cycles and consistent surface quality. The combination of ISO conformity, a PVD layer and a square geometry supports flexible use across external and internal turning tasks while keeping tooling logistics simple and efficient. For machining tasks that demand reliable edge stability and wear resistance, choose the Tungaloy SNMG120404 AH8015 insert—contact Metav Werkzeuge for tailored selection advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947281 Manufacturer article number: 6947281 SKU: 6947281-Tungaloy Manufacturer SKU: TUN6947281 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Grade/coating: AH8015, PVD-coated Manufacturer: Tungaloy Core measurements Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 90° Materials and features Suitable for: turning (external and internal) Geometry: ISO SNMG120404, square Hole: cylindrical centre hole Chipbreaker: double-sided Schneidstofftyp: PVD-coated carbide Application focus: heat‑resistant alloys FAQ What materials is this insert best suited to machine? The SNMG120404 AH8015 Tungaloy insert is primarily specified for machining heat‑resistant alloys, with the AH8015 grade offering a balanced combination of wear resistance and cutting-edge stability for such materials. What are the key dimensions and geometry of the insert? The SNMG120404 insert has a nominal size of 12 mm, a plate thickness of 4.76 mm, a corner radius of 0.4 mm and a 90° cutting angle; it is square with a cylindrical centre hole and follows ISO SNMG geometry (SKU 6947281-Tungaloy). Is the insert indexable and suitable for multiple edges? Yes, the insert is double-sided with an integrated chipbreaker, allowing indexing to maintain economical use of the cutting edges while sustaining chip control and surface finish. What advantages does the PVD coating provide? The PVD coating on the AH8015 grade enhances wear resistance and helps preserve the cutting edge at elevated temperatures, improving tool life and consistency in demanding turning operations. Can this insert be used for internal turning as well as external turning? Yes, the insert is suitable for both external and internal turning operations; correct holder selection and matching of form, clearance angle and tolerance class determine the final compatibility and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AH8015 Wendeplatten - Tungaloy
Take advantage of a robust, ISO-standard insert that combines PVD-coated carbide durability with a compact 0.4 mm corner radius for reliable finishing and consistent tool life; order via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMG120404 AH8015 SNMG turning insert (ISO 120404) for turning by Tungaloy — PVD-coated carbide, 0° clearance A SNMG120404 AH8015 insert designed for general turning of heat-resistant alloys, ISO-standardised and optimised for balanced wear resistance and edge stability ISO-standard SNMG insert for turning PVD-coated carbide AH8015 grade 12 mm square size for stable support Double-sided chipbreaker for longer life Consistent cutting performance through ISO conformity The ISO-standard configuration ensures repeatable seating and predictable geometry when used with compatible holders. The SNMG120404 format provides a square plate with a 12 mm size and 4.76 mm thickness, enabling secure clamping and uniform load distribution. Standardisation reduces setup time and simplifies inventory management across jobs, which supports a more predictable production flow and fewer stoppages. Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness. Balanced wear resistance and edge stability for heat-resistant alloys The PVD-coated AH8015 grade combines surface protection with a robust carbide substrate. This pairing delivers improved wear resistance while maintaining a stable cutting edge under intermittent loads. For machining heat-resistant alloys, this balance reduces flank wear and helps preserve part tolerances over longer tool life. Translating coating and substrate characteristics into practice, PVD layers protect against abrasive and adhesive wear, while the carbide core sustains mechanical strength at elevated temperatures. Practical application guidance and material suitability Designed primarily for turning operations, the insert is especially suited to outer and inner turning where heat-resistant alloys are present. The double-sided chipbreaker supports a range of feeds by controlling chip shape and evacuation, which lowers the risk of built-up edge and improves surface finish. Select the chipbreaker and grade according to workpiece material, machining style and system rigidity to obtain optimal results; the plate’s 0° clearance is best paired with appropriate toolpath parameters to avoid rubbing. Handling, mounting and system advantages for the workshop The quadrangular plate with a cylindrical locating hole allows straightforward indexing and replacement, reducing downtime during tool changes. The 0.4 mm corner radius is suited to finishing passes where consistency of profile is required, while the 90° included angle provides robust corner strength for light to moderate roughing and finishing cycles. Using ISO-compliant inserts simplifies logistics: matching a standard insert to proven holders and clamping sets supports safe, repeatable assembly and reliable machining outcomes. Discuss application requirements with Metav Werkzeuge’s technical team or order the SNMG120404 AH8015 insert from Metav Werkzeuge to benefit from Tungaloy’s proven grade and dependable performance; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947303 Manufacturer SKU: TUN6947303 SKU: 6947303-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade: AH8015 Application: turning Core dimensions Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 90° Relief/clearance angle: 0° Features & compatibility Quadrangular plate form With cylindrical hole Double-sided chipbreaker PVD-coated carbide grade AH8015 ISO-standard insert — compatible with matching holders FAQ What materials is this insert suitable for? The SNMG120404 AH8015 insert is intended primarily for heat-resistant alloys; the PVD-coated AH8015 grade offers a balance of wear resistance and edge stability suited to these materials. How is the insert mounted and indexed? The quadrangular plate with a cylindrical locating hole enables straightforward mounting and double-sided indexing for extended life and simple replacement. What corner radius and included angle are provided? The insert has a 0.4 mm corner radius and a 90° included angle, supporting consistent finishing and moderate production loads. Is the SNMG120404 compatible with standard ISO holders? Yes, the insert follows ISO geometry; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. Does the insert come with a specific chipbreaker type? This grade is supplied with a double-sided chipbreaker to assist chip control across a range of feeds and turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AT9530 Wendeplatten - Tungaloy
Benefit from a combination of precise surface quality and consistent wear behaviour delivered by the AT9530 coated cermet grade and the ISO‑standard SNMG geometry; the robust carbide body and 0.4 mm corner radius ensure predictable finishing results. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. SNMG 120404 AT9530 Tungaloy turning insert — square, 0.4 mm corner radius The SNMG120404 AT9530 Tungaloy indexable insert is an ISO‑standard square turning insert designed for fine and light finishing of steel components. SNMG geometry, ISO 120404 compatible AT9530 coated cermet for fine finishing Double-sided chipbreaker for reliable chips Square plate with 0.4 mm corner radius Optimised finishing for consistent surface quality The SNMG‑style indexable insert is engineered to deliver a superior surface finish in finishing applications. The AT9530 coated cermet grade prioritises even wear and low built‑up edge formation, which translates into fewer interruptions for tool changes and more consistent part quality. For operators transitioning from general‑purpose grades, the coating and substrate combination reduces edge degradation during low‑depth finishing cuts, meaning fewer rejects and less rework. Predictable geometry and secure clamping for process reliability With an ISO‑conforming square form and a 0.4 mm corner radius, this insert supports reliable toolpath programming and reproducible results across batches. The carbide substrate provides the rigidity required for steady cutting at fine feeds, while the cylindrical hole and matching clamping system ensure stable seating in standard external holders. These characteristics reduce vibration and promote dimensional stability, which benefits shops seeking to tighten tolerances without complex machine adjustments. Practical chip control and efficient machining Equipped with a double-sided chipbreaker, the insert manages chip formation effectively during light turning operations. Controlled chip formation improves operator safety and reduces the likelihood of workpiece surface damage from errant swarf. Because the geometry permits re‑indexing, the insert offers two usable cutting edges, supporting economical machining runs and lower tooling consumption in finishing cycles. Application guidance and system compatibility Designed for external and internal turning of steel, the insert integrates into standard ISO tool systems. Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; matching the insert to an appropriate external holder or boring bar is therefore essential for optimum performance. The system typically comprises the ISO indexable insert, a suitable external holder or boring bar, a seat/clamp set and replacement screws, enabling straightforward replacement and minimal downtime. Contact Metav Werkzeuge today to discuss how the SNMG120404 AT9530 insert can be applied to specific turning tasks; Metav Werkzeuge offers application advice by phone or email and can recommend the correct holder and machining parameters — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6773698 Manufacturer SKU: TUN6773698 SKU: 6773698-Tungaloy Model series: ISO‑Drehwendeschneidplatten Application: Turning Core data ISO designation: 120404 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included hole: with hole (cylindrical) Clearance angle: 0° Insert angle: 90° Special features Grade/coating: AT9530 Substrate: coated cermet Material: carbide Plate shape: square Chipbreaker: double‑sided System components: insert, holder interface, seat/clamp set, replacement screws FAQ What materials is this insert best suited for? The SNMG120404 AT9530 Tungaloy indexable insert is optimised for finishing and light machining of steel, offering good surface quality and uniform wear with the AT9530 cermet grade. Can the insert be re‑indexed to use multiple cutting edges? Yes, the square SNMG geometry allows re‑indexing; the double‑sided chipbreaker provides two usable edges per index for economical machining. Which holder types are compatible with this insert? Compatibility depends on holder form, clearance angle and fastening method; the insert fits standard ISO external holders or boring bars that accept SNMG‑style plates. Does the AT9530 grade require special cutting parameters? The AT9530 coated cermet grade performs best in finishing and light cuts; using conservative feeds and optimised cutting speeds for cermet will prolong tool life and maintain surface quality. What are the measurable dimensions to check before ordering? Verify ISO designation (120404), plate size (12 mm), plate thickness (4.76 mm), corner radius (0.4 mm) and the presence of a cylindrical hole to ensure correct fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 AT9530 Wendeplatten - Tungaloy
Take advantage of the coated cermet AT9530 for consistent surface quality and the ISO SNMG120404 geometry for reliable fit in standard holders; the result is predictable tool life and efficient finishing cycles. Order the insert directly via Metav Werkzeuge or consult their technical team for holder compatibility and process parameters. SNMG120404 AT9530 Tungaloy insert — ISO square insert for turning, coated cermet for finishing SNMG120404 AT9530 Tungaloy insert is a square, ISO‑standard indexable insert engineered for finishing and light turning of steel components Coated cermet grade AT9530 For finishing and light machining of steel ISO SNMG120404 geometry, 90° cutting angle 0.4 mm corner radius, double-sided chipbreaker High‑precision finishing with a coated cermet grade The AT9530 grade combines a coated cermet matrix with a formulation optimised for surface finish and even wear, making it especially suitable for fine turning operations. As a finishing insert, it reduces the need for secondary passes by improving surface integrity on steel workpieces, while the coating supports wear resistance under moderate cutting conditions. The use of a cermet substrate gives a stable edge and predictable flank wear, translating into repeatable component quality and fewer unexpected tool changes. Geometry and clamping compatibility ensure reliable seating Designed to ISO dimensions as SNMG120404, the insert features a square form, a 90° cutting angle and a 0.4 mm corner radius, with a 12 mm inscribed circle and 4.76 mm thickness. The insert is supplied with a cylindrical hole and a double‑sided chipbreaker, which influences clamping, indexability and the number of usable edges. Compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening and thickness; these parameters make the insert straightforward to match to standard external holders or boring bars in many turning setups. Chip control and consistent machining performance The double‑sided chipbreaker provides controlled chip formation during finishing passes, helping to avoid surface marking and ensuring chips are evacuated predictably. Stable chip control reduces interruptions and contributes to higher process reliability. In this insert, the interplay between the coating, cermet substrate and chipbreaker geometry delivers steady wear behaviour, which supports longer intervals between tool inspections and lowers overall machining variability. Practical advantages for production workflows As part of an ISO turning insert system, this item integrates easily into existing tool inventories and offers a clear replacement path when tools reach wear limits. The combination of cemented carbide substrate and AT9530 coating is optimised for light cuts and fine finishing, so shops focusing on repeatable high‑quality turning will benefit from fewer reworks and improved first‑pass yields. For guidance on pairing the insert with holders or selecting the correct chipbreaker and grade for specific steel grades, Metav Werkzeuge’s technical advisors can assist with application‑oriented recommendations. For tailored advice on holder compatibility, cutting data and prompt supply of Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert support and fast delivery. Technical data Article number: 6773700 Manufacturer SKU: TUN6773700 SKU: 6773700-Tungaloy Name: SNMG120404 AT9530 Tungaloy insert Numbers / Core technical data Geometry designation: 120404 Size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 90° Clearance angle: 0° Designs / Special features Coated cermet grade AT9530 Material: cemented carbide Square insert form With cylindrical hole (for clamping) Double‑sided chipbreaker Intended application: turning Model series: ISO turning indexable inserts FAQ What applications suit this insert best? The SNMG120404 AT9530 Tungaloy insert is designed primarily for finishing and light turning of steel, where high surface quality and uniform wear are priorities. Can the insert be used in standard ISO holders? Yes, the insert follows ISO dimensions; compatibility depends on holder form, clearance angle, fastening method, size and thickness—verify these parameters before assembly. How does the AT9530 grade affect tool life? The AT9530 coating and cermet substrate promote even wear and a stable cutting edge under finishing conditions, which supports consistent tool life and surface results. Is the chipbreaker suitable for fine surface requirements? The double‑sided chipbreaker on this indexable insert controls chip formation during light cuts, helping to maintain surface integrity during finishing passes. What identifiers help to order the correct insert? Order using the article number 6773700 or the manufacturer SKU TUN6773700 to ensure receipt of the SNMG120404 AT9530 Tungaloy insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 GH330 Wendeplatten - Tungaloy
Benefit from a combination of high wear resistance, precise ISO compatibility and stable chip control for efficient turning cycles; order the SNMG120404 GH330 Tungaloy turning insert directly via Metav Werkzeuge or consult the Metav team for selection support. SNMG 120404 GH330 turning insert — Tungaloy, ISO 120404, 90° square The SNMG 120404 GH330 is an ISO-standard turning insert designed for general external and internal turning applications, offering a balance of wear resistance and edge stability for productive metalcutting operations. ISO 120404 square turning insert GH330 Tungaloy grade for wear resistance Double-sided chipbreaker for versatile use 0.4 mm corner radius, 90° geometry High-performance grade for sustained productivity The GH330 grading, paired with cemented carbide, delivers consistent wear resistance and edge stability under standard turning conditions. This combination is designed to extend service intervals and support longer tool life, which contributes to reduced downtime and lower tool costs per component. The ISO designation ensures interchangeability with holders that match form, tolerance class, fastening and thickness, enabling predictable performance in serial production. Quick system integration and predictable set-up Compatibility is governed by form, rake, tolerance class, fastening, size and thickness, so the insert integrates smoothly into existing toolholders when those parameters match. The 4.76 mm plate thickness and 12 mm inscribed circle make the insert straightforward to seat in compatible clamping systems. The central cylindrical hole supports secure fastening, while the rake angle 0° maintains a neutral cutting geometry useful for stable chip flow and repeatable set-ups. Geometry engineered for chip control and surface quality The double-sided chipbreaker geometry and a 0.4 mm corner radius combine to improve chip formation and evacuation during turning. The square, 90° insert shape provides robust corner support for external operations and adequate stability for light internal cuts, promoting better surface finishes and consistent dimensional results. Standard ISO form factor facilitates fast index changes, reducing non-productive time during tool replacement. For application advice, availability or a recommendation for machining with GH330, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930; Metav Werkzeuge can advise on holder compatibility and batch supply. Technical Data Article number: 6806697 Manufacturer SKU: TUN6806697 Model series: ISO turning inserts Material: Cemented carbide ISO designation: SNMG120404 Facts Corner radius: 0.4 mm Inscribed circle / size: 12 mm Plate thickness: 4.76 mm Geometry angle: 90° Rake angle: 0° Special features Grade: GH330 Chipbreaker: Double-sided Hole: Cylindrical hole Shape: Square Intended use: Turning (external and internal) Manufacturer: Tungaloy FAQ What materials is this insert suitable for? The SNMG120404 GH330 insert is designed as a general turning grade; the GH330 composition in cemented carbide suits a wide range of steels and common engineering materials under standard cutting conditions. How does the chipbreaker affect machining? The double-sided chipbreaker on the SNMG120404 GH330 promotes controlled chip formation and evacuation, which helps maintain surface quality and reduces the risk of built-up edge during continuous turning. Is the insert compatible with standard ISO holders? Yes. The SNMG120404 designation follows ISO norms, so the insert fits holders that accept SNMG inserts when form, tolerance class, fastening, size and thickness are matched. What does the 0.4 mm corner radius mean for finishing? A 0.4 mm corner radius provides a compromise between tool strength and micro-geometric finish, allowing stable cutting forces while supporting good surface quality in finishing and medium turning passes. How often can the insert be indexed? The SNMG-format insert is double-sided, enabling multiple index positions; the exact number of effective edges depends on wear during use and the specific operating conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a wear‑resistant GT9530 coating and the proven ISO geometry of the SNMG120404 insert to deliver consistent surface finish and extended tool life; easy integration into ISO holders speeds changeover and reduces downtime — order directly via Metav Werkzeuge or consult our advisors for optimal selection. SNMG 120404 GT9530 ISO turning insert for turning by Tungaloy The SNMG120404 GT9530 is an ISO‑standard turning insert intended for finishing and light universal turning operations, optimised for steel where superior surface quality and extended life are required Coated Cermet GT9530 for superior finish ISO SNMG geometry for widespread holder fit Double-sided chipbreaker for stable chips 0.4 mm corner radius for precise contours Consistent finishing and longer tool life with GT9530 The grade GT9530 is a coated cermet developed for wear‑resistant finishing and light universal turning of steel, delivering improved surface quality and an extended edge life under stable conditions. The coating reduces flank wear and supports repeatable part finish over longer intervals between indexings, which leads to fewer interruptions in the production sequence. In practice, this means more parts per insert and less frequent tool changes, improving throughput and reducing handling time. Straightforward holder compatibility and robust geometry Adopting the ISO SNMG120404 format ensures straightforward compatibility with a wide range of ISO holders and boring bars; the insert’s square form (12 mm), 4.76 mm thickness and cylindrical hole provide positive mechanical location and reliable clamping. The 0.4 mm corner radius produces accurate contours while maintaining acceptable strength at the edge, and the 0° relief angle fits standard holder geometries. Compatibility is governed by insert form, relief angle, tolerance class, fixing method, size and thickness — all standardised to simplify inventory and setup. Reliable chip control and targeted application guidance The insert features a double‑sided chipbreaker designed to deliver stable chips under recommended cutting conditions, reducing the risk of built‑up edge and improving surface integrity on finishing passes. Typical uses are external and internal turning where a fine finish and dimensional consistency are key. Select the chipbreaker and GT9530 grade when the workpiece material and process stability favour a finishing‑oriented solution; for heavier interrupted cuts or unstable setups, consider a more robust grade or different geometry to protect the edge and tool life. Contact Metav Werkzeuge for tailored advice on Tungaloy GT9530 inserts and secure reliable delivery via Metav Werkzeuge’s technical team Technical Data Article number: 6998092 Manufacturer SKU: TUN6998092 Metav SKU: 6998092-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Core dimensions Insert designation: SNMG120404 Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° Special features Grade / coating: GT9530 Cutting material: coated cermet Hole style: cylindrical hole (with hole) Chipbreaker: double-sided Shape: square Application: Turning (Drehen) Typical use: finishing to light universal on steel FAQ What materials is this insert best suited for? The SNMG120404 GT9530 insert is specified for steel finishing applications; the GT9530 coated cermet offers wear resistance and surface quality suited to stable turning operations on steel. How does the 0.4 mm corner radius affect part geometry? A 0.4 mm corner radius balances contour accuracy and edge strength, producing defined radii on turned features while maintaining robustness for finishing passes with consistent tool support. Is the SNMG120404 compatible with standard ISO holders? Yes — the SNMG120404 follows ISO form and dimensions, enabling secure mounting in corresponding ISO SNMG holders and boring bars that accept a 12 mm square insert with a cylindrical hole. Can this insert be indexed on both sides? The insert is double-sided, providing two usable cutting edges per side as indicated by the geometry and chipbreaker design, which helps extend effective life before replacement. What chip control can be expected with the GT9530 grade? The double-sided chipbreaker combined with the GT9530 coating promotes predictable chip formation and evacuation during finishing operations, improving surface quality and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 GT9530 Wendeplatten - Tungaloy
Conflicting product data: the tool is listed both as cemented carbide and as a coated cermet, which creates confusion and raises questions about the accuracy of the provided information. A reliable product description cannot be generated from these inconsistent specifications, as the lack of clarity regarding the material composition makes it difficult to determine the tool's actual properties, performance characteristics, and intended applications. This inconsistency could lead to potential misunderstandings among users, incorrect usage, or even safety concerns if the tool is not suitable for the intended purpose. Ensuring accurate and consistent product data is essential for maintaining trust and usability.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com