SNMG 120404 NS520 Wendeplatten - Tungaloy
Benefit from consistent surface finish, controlled wear and straightforward ISO compatibility with the NS520 cermet grade for finishing and light machining. Order the insert directly via Metav Werkzeuge or ask the consultants if additional machining data is required. SNMG 120404 NS520 Tungaloy — Indexable Turning Insert, cermet finishing grade A SNMG 120404 NS520 indexable insert designed for turning applications, optimised for finishing to light machining of steel where surface quality and dimensional stability are critical Cermet grade NS520 for finishing Double-sided chipbreaker for consistent chips ISO SNMG 120404 square insert, 12 mm 0° clearance for secure seating Consistent finishing and controlled wear for steel turning The NS520 grade is a cermet / coated cermet composition developed for the finishing to light machining of steel, prioritising surface finish and dimensional accuracy. Cermet combines ceramic hardness with metallic toughness, which promotes a fine, stable cutting edge and reduces built-up edge; the result is a reproducible surface quality and predictable wear. For production environments requiring uniform part appearance and repeatable tolerances, this material choice offers an effective balance between tool life and part quality. ISO-compliant geometry for reliable clamping and replacement Designed as an ISO SNMG 120404 square insert, the geometry ensures compatibility with standard external holders and boring bars as determined by form, relief angle, tolerance class, fastening and size. Key specifications include a 12 mm inscribed circle, 4.76 mm plate thickness, a 0.4 mm corner radius and a cylindrical hole for secure mounting. The double-sided chipbreaker and 0° clearance facilitate consistent chip formation and stable seating in the pocket, simplifying tool changes and reducing setup variability across shifts. Application guidance to enhance process reliability Typical use is for both external and internal turning where finishing and light stock removal are required; matching the double-sided chipbreaker and grade to component material and machining stability is essential. The insert forms part of a system comprising an insert, a compatible external holder or boring bar, a shim/lockset and replacement screws. For best results, select feeds and depths aligned with finishing objectives rather than heavy metal removal; this approach supports the NS520’s strengths in surface quality and even flank wear while maintaining efficient cycle times. Select the Tungaloy NS520 SNMG insert for reproducible finishing performance and contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806653 Manufacturer SKU: TUN6806653 Manufacturer: Tungaloy Facts ISO designation: SNMG120404 Size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° Special features Grade: NS520 Material: carbide base with cermet / coated cermet Chipbreaker: double-sided Hole: cylindrical hole (with hole) Shape: square indexable insert Typical application: turning (external and internal) FAQ What materials is this insert optimised for? The SNMG120404 NS520 insert is optimised for machining steel in finishing to light machining operations, with the NS520 cermet focusing on surface quality and consistent wear. Is the insert compatible with standard ISO holders? Compatibility with ISO holders is ensured by the SNMG120404 geometry (form, tolerance class, fastening, size and thickness); the square shape, cylindrical hole and 0° relief angle conform to standard insert pockets. How does the double-sided chipbreaker help the process? The double-sided chipbreaker on this grade promotes controlled chip formation and even cutting forces, improving surface finish and reducing the risk of irregular wear during finishing passes. What system components are needed for correct mounting? A complete system includes the insert, a matching external holder or boring bar, a shim/lockset and replacement screws; correct clamping and tolerance class matching are important for secure seating. Can this insert be used for internal turning as well as external turning? Yes, the geometry and grade are suitable for both external and internal turning when selected with appropriate holders and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 NS9530 SNMG Wendeplatten - Tungaloy
Product data conflict: the cutting material is specified as uncoated cermet, while the base material is listed as cemented carbide, which is inconsistent. Please verify the product data before a full description can be generated, as such discrepancies may lead to confusion or errors in the manufacturing process, potentially affecting the performance, durability, and overall quality of the final product. Ensuring accurate and consistent product data is crucial for maintaining production standards, avoiding costly mistakes, and providing customers with reliable information about the materials and specifications of the tools or components they are purchasing for their specific applications.
SNMG 120404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of excellent surface finish, low cutting forces and simple interchangeability for reliable finishing operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMG120404 NS9530 indexable turning insert — uncoated cermet, finishing grade (Tungaloy) A SNMG120404 NS9530 indexable insert designed for high-quality finishing in turning applications, offering a sharp cutting edge and optimised chip control. Uncoated cermet finishing grade NS9530 Sharp cutting edge for superior surface quality 0.4 mm corner radius for precision profiles Double-sided chipbreaker for consistent chips ISO SNMG120404 format with cylindrical hole Delivering repeatable precision and superior surface finish The NS9530 grade is an uncoated cermet developed for finishing steel, combining a ceramic-rich matrix with a metallic binder to keep a sharp cutting edge under continuous cutting conditions. This material mix results in low cutting forces and excellent edge retention, which directly translates into finer surface textures and reduced need for secondary finishing. For machining processes with small depths of cut and steady feed, the insert supports consistent part quality and minimises micro-variations on turned surfaces. Stable chip control and secure clamping for predictable cycles Chip control is achieved through the double-sided chipbreaker geometry and the insert’s square form with a cylindrical hole, ensuring reliable evacuation of chips during continuous turning. Compatibility with holders follows ISO conventions: the fit depends on form, relief angle, tolerance class, fastening method, size and thickness. The ISO SNMG120404 format facilitates quick replacement in standard SNMG external holders and boring bars, supporting short changeover times and predictable machining cycles. Geometry tuned for finishing and flexibility in application The insert’s 0.4 mm corner radius and 0° relief angle support delicate profile work and minimise cutting edge deflection, which is beneficial for producing tight tolerances and consistent form on external and internal contours. The square form (12 mm size) and a plate thickness of 4.76 mm provide a stable seating in the toolholder; the double-sided construction allows indexability, extending tool life before disposal. Select the appropriate chipbreaker and grade based on workpiece rigidity and the specific steel grade to maximise performance. Process efficiency, repeatability and tool management Using an uncoated cermet finishing grade reduces vibration sensitivity from lower cutting forces and often extends intervals between tool changes, improving uptime and throughput. The insert is part of a straightforward system set—indexable insert, matching external holder or boring bar, support shim/clamping kit and replacement screws—so stock and logistics remain manageable. Together, these factors contribute to cost-effective finishing, reliable batch-to-batch repeatability and a more efficient production flow. For application advice on Tungaloy NS9530 finishing inserts or to arrange supply via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944753 Manufacturer SKU: TUN6944753 SKU: 6944753-Tungaloy Model series: ISO indexable turning inserts Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Hole: with hole (cylindrical) Plate form: square Included angle: 90° Special features Grade: NS9530 (uncoated cermet) Chipbreaker: double-sided Application: turning; finishing steel Material: carbide Mounting: ISO SNMG120404 format FAQ What materials is the SNMG120404 NS9530 suited for? The SNMG120404 NS9530 Tungaloy insert is a finishing grade optimised for steel; the uncoated cermet composition excels in continuous cuts and small depths of cut typical for fine turning of steel components. Which toolholders are compatible with this insert? Compatibility follows the ISO SNMG120404 standard; holders must match the insert form, relief angle, tolerance class, fastening method, size and thickness—this ensures the SNMG120404 NS9530 insert seats securely in standard SNMG external holders. Is the insert reversible and how many cutting edges are available? The insert features a square form with a double-sided chipbreaker, allowing indexing of multiple edges; refer to SKU 6944753-Tungaloy or Manufacturer SKU TUN6944753 for the exact configuration and edge count. How does the NS9530 grade control chips during finishing? Chip control is achieved via the double-sided chipbreaker geometry combined with the insert’s sharp cutting edge; SNMG120404 NS9530 produces consistent chip flow under continuous feeds, supporting stable cutting and surface quality. What does the grade designation NS9530 indicate? NS9530 denotes an uncoated cermet finishing grade from Tungaloy, formulated for excellent edge retention, low cutting forces and high surface finish on steel components; it is intended for finishing operations rather than heavy roughing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 NS9530 Wendeplatten - Tungaloy
Product data inconsistency: the field "material" specifies "Hartmetall" (carbide), while the cutting material is given as "uncoated cermet" (NS9530). This discrepancy could lead to confusion or errors in the manufacturing process, as the material type directly impacts the product's performance, durability, and suitability for specific applications. Please verify and correct the conflicting entries before producing the product description to ensure accuracy and consistency in the documentation, which is crucial for maintaining quality standards, meeting customer expectations, and avoiding potential issues during production or usage. Accurate data is essential for clear communication and reliable product specifications across all stages of development.
SNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the SNMG120404 geometry combined with the NS9530 uncoated cermet for consistent finishing of steel components; the low cutting forces and sharp cutting edge reduce rework and improve surface quality. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. SNMG120404 NS9530 Tungaloy – ISO indexable turning insert, uncoated cermet for finishing The SNMG120404 NS9530 Tungaloy is an ISO‑standard square turning insert intended for finishing operations on steel, offering a sharp cutting edge and optimised chip control for continuous cuts and small depths of cut. ISO SNMG 120404 geometry, 90° cutting angle Uncoated cermet NS9530 for fine finishing 0.4 mm corner radius for precise profiles Double-sided chipbreaker, cylindrical-holed insert Achieve consistent fine finishes with a dedicated finishing grade The NS9530 grade is an uncoated cermet developed as a finishing sort for steel, delivering a sharp cutting edge and low cutting forces. These properties reduce the tendency for built-up edge during continuous turning and help to achieve a superior surface finish with minimal secondary machining. By using a finishing‑oriented insert, process planners can expect more stable results at small depths of cut and reduced need for corrective passes, which supports predictable cycle times in series production. Secure clamping and geometric compatibility for repeatable results Compatibility with the toolholder is determined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. The square ISO SNMG 120404 shape with a cylindrical hole provides reliable seating and repeatable positioning in appropriately matched external holders or boring bars. Specifying the correct holder geometry and tolerance class ensures that the 0° clearance and 4.76 mm plate thickness translate into consistent cutting engagement and predictable tool life over multiple insert changes. Productivity gains via controlled chip formation and sharp edge life The double‑sided chipbreaker design supports manageable chip control during continuous cutting, reducing the risk of entanglement and helping to maintain stable cutting forces. The combination of a cermet substrate and the insert’s geometry encourages fine, consistent chips and a clean exit at the cutting edge, which diminishes vibration and supports higher surface quality. For operations where repeatability and reduced rework are priorities, this indexable insert contributes directly to cycle‑time reliability and overall process efficiency. Practical selection guidance for robust turning operations When selecting an insert system for turning, choose the NS9530 finishing grade where fine surfaces and low cutting forces are required; pair the insert with a holder rated for the SNMG geometry and ensure correct clamping torque and seating. For small depths of cut and continuous feed conditions, the sharp edge and 0.4 mm corner radius are particularly advantageous for producing tight profiles without excessive feed marks. If uncertain about holder matches or cutting data, request a specification check to align insert geometry with machine rigidity and workpiece material. For precision finishing using Tungaloy’s NS9530 grade, contact Metav Werkzeuge for tailored application advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998192 Manufacturer SKU: TUN6998192 SKU: 6998192-Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Insert size: 12 mm Included angle: 90° Special features Material: cemented carbide Grade: NS9530 (uncoated cermet) Chipbreaker: double-sided Hole: cylindrical hole Plate form: square Clearance angle: 0° Series: ISO indexable turning inserts Application: turning FAQ What workpiece materials is this grade best suited for? The SNMG120404 NS9530 Tungaloy insert is a finishing sort for steel; the uncoated NS9530 cermet is optimised for continuous cuts and small depths of cut to produce high surface quality on steel components. How does holder compatibility affect performance? Compatibility is defined by insert form, clearance angle, tolerance class, fastening, size and thickness; using a correctly matched holder ensures the SNMG geometry seats properly and delivers repeatable cutting conditions. Is the insert single‑use or indexable for multiple edges? The insert is double‑sided with a double‑sided chipbreaker, allowing indexing of multiple cutting edges to extend productive life before replacement. What edge geometry should be expected and when is it ideal? The insert features a 0.4 mm corner radius, which is suitable for precise profiles and finishing operations where surface quality and dimensional control are priorities. Does the SNMG120404 come with a coating? This variant uses an uncoated cermet grade (NS9530), chosen for its sharp edge and low cutting forces in finishing applications on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 NS9530 Wendeplatten - Tungaloy
Combining uncoated cermet NS9530 finishing performance, a sharp cutting edge and double-sided economy produces consistently high surface quality and efficient tool use; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. SNMG 120404 NS9530 Indexable turning insert – Tungaloy A SNMG120404 NS9530 ISO-series indexable insert for turning, optimised for finishing steel with a low cutting-force geometry and secure clamping. Uncoated cermet NS9530 for finishing Sharp cutting edge, low cutting forces Double-sided geometry, economical use 0.4 mm corner radius, square 12 mm form Superior surface quality for finishing operations The uncoated cermet grade NS9530 is engineered for finishing passes on steel, offering a sharp cutting edge that reduces cutting forces and promotes a fine surface finish on continuous cuts. For operations with small depths of cut the material’s inherent edge stability supports repeatable results and minimises workpiece rework. The combination of a low-relief angle and a precisely formed cutting edge helps achieve consistent dimensional accuracy without aggressive cutting parameters. Cost-effective performance through indexability and geometry A double-sided insert reduces tooling expenditure by providing two usable edges, while the square form and robust geometry ensure predictable wear patterns. The modest 0.4 mm corner radius delivers a balance between edge strength and the finer finishes expected in final passes, helping to lower total tooling cost per part. Where productivity and component quality must be weighed, this insert offers an economical choice that maintains finishing standards across medium-duty turning cycles. Simple integration with ISO toolholders and secure clamping Compatibility with standard ISO holders is determined by form, relief angle, tolerance class, fastening and thickness; the insert’s cylindrical hole and standard dimensions support reliable clamping in common outside holders and boring bars. The 4.76 mm thickness and square 12 mm form ensure mechanical stability in the holder assembly, while the 90° insert angle suits many turning set-ups for external and internal operations. Correct holder selection and torque for the clamping screw are decisive for runout control and repeatable machining. Match chipbreaker and cutting data to application The double-sided chipbreaker provides versatility across continuous finishing cuts; matching the chipbreaker style and insert grade to the workpiece and cutting conditions is essential for optimal chip control and surface integrity. For continuous cuts in steel, a finishing chipbreaker paired with the NS9530 grade keeps cutting forces low and surface roughness minimal. Where interrupted cuts or tougher materials are encountered, consider alternative grades or tailored chipbreaker geometries for stable performance. For application-specific advice on Tungaloy NS9530 finishing inserts and to secure matching holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6944774 Manufacturer SKU: TUN6944774 SKU: 6944774-Tungaloy Model series: ISO turning inserts Label: SNMG120404 NS9530 Tungaloy insert Core data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Insert angle: 90° Special features Material: carbide Grade: uncoated cermet NS9530 Double-sided chipbreaker Square form Cylindrical hole ISO-series compatible Application: Turning (finishing steel) FAQ What applications is this insert best suited for? This SNMG120404 NS9530 Tungaloy indexable insert is optimised for finishing operations in steel, especially continuous cuts with small depths of cut where a fine surface finish and low cutting forces are required. Which holders are compatible with this ISO insert? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the SNMG120404 format is compatible with ISO-standard outside holders and boring bars that accept square 12 mm inserts with a cylindrical hole. How many usable edges does the insert provide? The insert features double-sided geometry, providing two usable edges and offering economical tool use through indexability. What are the key dimensions to check when ordering? Important dimensions are the 12 mm size, 4.76 mm thickness, 0.4 mm corner radius and the 90° insert angle; these parameters ensure correct fit and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the field "material" is specified as "Hartmetall" (cemented carbide) while the product description and grade indicate an uncoated cermet (NS9530). This discrepancy suggests a potential error in the provided data, which could lead to confusion or inaccuracies in the final product information. Unable to generate the full product text until the source data is verified and corrected, as accurate and consistent data is essential for ensuring the reliability of the output. Please check and update the conflicting entries to resolve this issue and enable the generation of a complete and accurate product description.
SNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of uncoated cermet NS9530 for superior surface finish and the ISO SNMG geometry with a 0.4 mm corner radius for stable turning performance; order the insert directly via Metav Werkzeuge or consult our experts for application-specific recommendations. SNMG 120404 NS9530 – indexable insert for turning (Tungaloy) SNMG120404 NS9530 is an ISO‑form indexable insert designed for precision finishing in turning operations on steel. Uncoated cermet for fine finishing Sharp cutting edge; low cutting forces ISO SNMG form with 0.4 mm corner radius Double-sided chipbreaker, with cylindrical hole High-quality finishing with low cutting forces The uncoated cermet grade NS9530 delivers a consistently fine surface on steel components by combining a keen cutting edge with thermal stability during continuous cuts. Its formulation reduces built-up edge and maintains a sharp profile, which results in lower cutting forces and improved surface integrity. For finishing passes and small depths of cut, this insert offers measurable gains in productivity and part quality compared with conventional grades, while permitting higher feed stability in long runs. Precise geometry and secure clamping for repeatable results The ISO SNMG geometry with a 0.4 mm corner radius and a square plate form provides predictable chip flow and dimensional control. The insert is double‑sided and features a cylindrical hole for accurate locating and secure clamping in compatible holders; compatibility is determined by form, relief angle, tolerance class, attachment and thickness. These attributes reduce vibration and tool movement, which lowers rework rates and extends effective tool life through consistent edge engagement. Application guidance and selection advantages Designed primarily for turning, the grade is particularly suited to continuous cuts and small uncut chip thicknesses where surface finish is critical. The combination of a sharp cutting edge and cermet chemistry supports finishing on a wide range of steels when using the appropriate holder and cutting parameters. When selecting the holder and cutting data, consider rigidity and feed rate to exploit the insert’s capacity for good surface quality and low cutting forces; matching the chipbreaker and grade to the workpiece material and machining method yields the best economy and process stability. For precision finishing with Tungaloy inserts, request application advice and place orders through Metav Werkzeuge—contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and availability Technical data Article number: 6998190 Manufacturer SKU: TUN6998190 SKU: 6998190-Tungaloy Brand: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 12 mm Included angle: 90° Relief angle: 0° Special features ISO designation: SNMG120404 Grade: NS9530 (uncoated cermet) Cutting material: Hartmetall Plate form: square Chipbreaker: double-sided Hole: with cylindrical hole Application: Turning FAQ What holder types are compatible with this SNMG insert? Compatibility depends on holder form, relief angle, tolerance class, attachment method, size and thickness; the SNMG120404 insert fits standard SNMG external turning toolholders used for ISO SNMG inserts. Is the NS9530 grade suitable for finishing steel? Yes, the NS9530 uncoated cermet is formulated for finishing steel with a sharp cutting edge and low cutting forces, delivering high surface quality in continuous cutting conditions. Can the insert be used on interrupted cuts? The grade is optimised for continuous cuts and small depths of cut; for heavy interruption or unstable setups, a more robust grade or different chipbreaker may be preferable. How does the 0.4 mm corner radius affect part quality? A 0.4 mm corner radius improves edge strength while maintaining the capacity for fine surface finishes; it balances durability and precision for finishing passes. What is the manufacturer article reference for ordering? The Tungaloy article number for this insert is 6998190 and the manufacturer SKU is TUN6998190 for ordering and stock reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, low cutting forces and an ISO-standard form for consistent, high-quality finishes in turning operations; order SNMG120404 NS9530 inserts directly via Metav Werkzeuge or consult the technical team for application support. SNMG 120404 NS9530 indexable insert for turning – Tungaloy The SNMG120404 NS9530 is an ISO-indexed turning insert intended for finishing of steel, offering a sharp edge geometry and a chip control solution suited to continuous cutting and small depths of cut. Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Double-sided chipbreaker for consistent chips ISO SNMG 120404, square 12 mm, cylindrical hole Precise finishing performance for steel turning The insert delivers a finishing-oriented performance thanks to the uncoated cermet composition of the NS9530 grade, which combines a very sharp cutting edge with wear resistance. This results in lower cutting forces and an improved surface quality on steel components when machining under continuous-cut conditions and with small radial depths of cut. The design is optimised for predictable tool life in finishing cycles, allowing process planners to rely on consistent part quality and reduced rework. Designed for straightforward mounting and ISO compatibility As an ISO‑standard indexable insert, the geometry and dimensions follow common holder requirements: SNMG 120404 denotes the form, while the insert is supplied with a cylindrical hole for secure clamping. The square 12 mm size and a plate thickness of 4.76 mm ensure mechanical stability in most external and internal turning holders that accept SNMG‑type plates. The corner radius 0.4 mm supports fine edge definition and contributes to the superior surface integrity achievable with this insert. Operational advantages and recommended cutting conditions The NS9530 grade is a finishing sort crafted for steels, showing its strengths at modest cutting depths and in uninterrupted cuts. The double-sided chipbreaker helps produce manageable chips and stable evacuation, reducing the risk of re-cutting or edge damage. Because the clearance angle is 0°, correct holder selection and set‑up are essential to achieve the intended shear conditions; once set up, the insert enables reliable, repeatable finishing with reduced force and demonstrable efficiency gains. Productivity, process security and application scope In production environments prioritising surface quality and cycle-time predictability, the insert supports high process stability and good surface finishes on a wide range of steels. The ISO conformity simplifies tool inventory and replacement procedures, making integration into existing tool systems straightforward. For tailored recommendations on feeds, speeds and holder compatibility, technical consultation is available to ensure the insert meets specific machining goals and machine constraints. Request application advice or place an order for Tungaloy SNMG 120404 NS9530 inserts through Metav Werkzeuge – contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and specification assistance Technical data Article number: 6998178 Manufacturer SKU: TUN6998178 Brand: Tungaloy Model series: ISO indexable turning inserts Facts Size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Geometry/angle: 90° Hole: with cylindrical hole Special features Grade: NS9530 (uncoated cermet) Chipbreaker: double-sided Plate form: square Typical application: external and internal turning, finishing cuts Compatibility: ISO standard for holders (form, size, thickness, clamping) FAQ What materials is this insert best suited for? The SNMG120404 NS9530 insert is specified as a finishing grade for steels and performs particularly well in continuous cutting when low cutting forces and a high surface finish are required. Is the insert reversible or indexable? Yes, the SNMG 120404 is an indexable insert with multiple cutting edges; the double-sided chipbreaker allows reversal to a fresh edge to extend tool life. Which holder type is required to use this insert? An ISO-compatible turning holder designed for SNMG geometry with a cylindrical hole clamp and the correct seat for a square 12 mm insert is required for secure mounting and the intended cutting geometry. What corner radius and thickness should be expected? The insert has a corner radius of 0.4 mm and a plate thickness of 4.76 mm, dimensions that support fine finishing and stable cutting in turning operations. Can the NS9530 grade be used for interrupted cuts? The grade is optimised for continuous cutting and small depths of cut; interrupted cuts may reduce edge life and are not the primary intended application for NS9530. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 NS9530 Wendeplatten - Tungaloy
Benefit from a combination of high surface quality, low cutting forces and straightforward ISO compatibility for consistent finishing results. The SNMG120404 NS9530 insert delivers sharp-edge performance and reliable chip control; order through Metav Werkzeuge or consult our technical advisors for application support. SNMG120404 NS9530 turning insert – uncoated cermet finishing grade | Tungaloy A SNMG120404 NS9530 indexable turning insert engineered for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts. Finishing-grade uncoated cermet NS9530 Sharp cutting edge for superior surface finish Double-sided chipbreaker for reliable chip control ISO SNMG120404 format, 90° square insert Consistent finishing and reduced rework through low cutting forces The NS9530 grade is an uncoated cermet developed for finishing steel with an emphasis on a sharp cutting edge and high surface finish. In practice this means lower cutting forces during continuous turning, which reduces vibration and the risk of workpiece distortion. The result is fewer re-machining cycles and a predictable component finish, making the insert particularly suited to applications where dimensional accuracy and surface integrity are critical. The combination of sharp geometry and cermet substrate promotes stable performance on small depths of cut. Robust geometry and ISO compatibility for reliable tool setups Built to the ISO SNMG120404 format, the insert features a 0.4 mm corner radius, 12 mm inscribed circle, and a plate thickness of 4.76 mm, with a 90° approach and 0° rake angle. The square form with a cylindrical hole ensures secure locating and straightforward clamping in standard holders. These dimensional standards facilitate rapid tool changes and reduce setup variation across machines. The double-sided chipbreaker extends usable edge life and maintains consistent chip control across repetitive production runs. Practical guidance for maximised productivity and surface quality For finishing tasks choose steady feeds and small depths of cut to exploit the cermet's edge stability; the built-in chipbreaker supports continuous machining and keeps swarf manageable. In a typical system the insert is used with a compatible external holder, a shim and clamping set, plus spare screws for maintenance. Selecting the correct chipbreaker and grade for the workpiece material will improve cycle times and reduce scrap. For repeatable results, match holder geometry and tolerance class to the insert form to ensure correct seat and clamping pressure for each cut; this delivers efficient, low-variation production. For finishing operations on steel, prefer the Tungaloy NS9530 grade and contact Metav Werkzeuge for application advice or to discuss compatible holders and clamping solutions — eMail: info@metav-werkzeuge.com or Telefon: +49 2822 7131930 Technical data Article number: 6998186 SKU: 6998186-Tungaloy Manufacturer SKU: TUN6998186 Model series: ISO indexable turning inserts Core data Insert designation: SNMG120404 Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 90° Rake angle: 0° Hole style: cylindrical hole Materials & features Grade: NS9530 (uncoated cermet) Application: turning (finishing) Shape: square Chipbreaker: double-sided Mounting: with hole FAQ What operations is this insert intended for? The SNMG120404 NS9530 insert is designed primarily for finishing turning operations on steel, delivering a sharp edge and low cutting forces for high-quality surfaces. Which holder types are compatible with the SNMG120404 format? Compatibility depends on holder form, radial relief, tolerance class, clamping method, size and thickness; use holders specified for ISO SNMG120404 inserts to ensure proper fit. How does the NS9530 grade differ from coated carbide grades? NS9530 is an uncoated cermet grade optimised for sharp-edge finishing with low cutting forces, giving excellent surface quality in continuous cuts compared with typical coated carbide finishing grades. Can the insert be used for roughing as well as finishing? The SNMG120404 NS9530 is optimised for finishing and small depth-of-cut applications; for roughing, a more robust grade and chipbreaker suited to higher feeds and interrupted cuts should be selected. Are spare mounting components required for machine downtimes? A complete system includes an ISO insert, compatible external holder, shim/clamping set and spare screws; keeping spare consumables on hand reduces downtime and maintains productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 NS9530 Wendeplatten - Tungaloy
There is an inconsistency in the supplied product data: one specification describes the cutting material as uncoated cermet, while another entry lists the tool material as cemented carbide (hard metal). These are distinct material classes with different compositions, properties and machining behaviours, so they cannot both correctly describe the same insert simultaneously. This discrepancy prevents a reliable, production-ready product description or technical recommendation. Please confirm the correct cutting material and grade (for example whether the grade NS9530 refers to a cermet formulation or to a cemented-carbide variant) so that the itemisation, application guidance and machining parameters can be prepared accurately. Once the material classification is clarified, a full, consistent product text and technical data sheet will be provided.
SNMG 120404 T5105 Wendeplatten - Tungaloy
Combining a CVD-coated carbide T5105 grade with a 0.4 mm corner radius and a square, hole-mounted form, this insert delivers wear resistance and stable performance for high-speed cast-iron turning. Benefit from ISO compatibility for straightforward holder replacement and order directly via Metav Werkzeuge or consult our specialists for holder matching and process setup. SNMG 120404 T5105 indexable turning insert by Tungaloy — for turning applications A SNMG120404 T5105 indexable insert designed for high-speed external and internal turning of cast iron under stable machining conditions. CVD-coated carbide grade T5105 Square plate, 12 mm size 0.4 mm corner radius for finishing Double-sided chipbreaker with cylindrical hole Optimised high-speed cutting for cast iron The combination of a T5105 grade and CVD-coated carbide substrate is engineered for extended edge life during high-speed machining of cast iron. The wear-resistant coating reduces flank wear and maintains cutting-edge geometry, which leads to fewer indexings and longer unattended runs. As a consequence, cycle times are reduced and tool-change frequency drops, supporting predictable throughput in serial production. ISO compatibility for reliable holder integration The insert follows ISO specifications; compatibility with toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness. This standardised geometry simplifies tool inventory and allows quick swapping between matched holders or boring bars, reducing setup time. The square plate with a cylindrical hole ensures secure clamping and repeatable positioning, which supports consistent part quality across shifts. Coating and substrate that support consistent performance The CVD-coated surface atop a hard carbide substrate provides high abrasion resistance and thermal stability during interrupted cuts and elevated cutting speeds. CVD coatings form a thin, adherent layer that resists abrasive wear and helps control built-up edge formation when machining abrasive or nodular cast irons. The result is a more uniform tool life and steadier surface finish over long production runs. Design details that sustain productivity and surface quality A 0.4 mm corner radius is well suited for finishing and light semi-finishing passes, balancing edge strength with surface definition. The double-sided chipbreaker increases indexable life per insert by offering two usable cutting edges and improved chip control, while the square 12 mm plate format provides multiple indexing positions. Together, these details reduce downtime for index changes and help maintain consistent part tolerances in turning operations. For holder selection, batch availability and expert machining advice on the Tungaloy SNMG120404 T5105 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast supply Technical data Article number: 6852983 SKU: 6852983-Tungaloy Manufacturer SKU: TUN6852983 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 90° Relief angle: 0° Hole: with cylindrical hole Special features Shape: square Chipbreaker: double-sided Coating / grade: T5105 (CVD-coated) Material: carbide Application: turning Compatible with ISO holders FAQ Which materials is this insert best suited for? The SNMG120404 T5105 insert is optimised for high-speed machining of cast iron; the T5105 grade and coating resist abrasive wear typical for many cast-iron alloys. What does the designation T5105 indicate? T5105 denotes a wear-resistant, CVD-coated carbide grade designed for stable, high-speed cutting performance and extended edge life in cast-iron applications. Is the insert indexable and reversible? Yes — the square plate offers multiple indexing positions and the double-sided chipbreaker provides two usable cutting edges per indexable side, improving overall tool economy. How is holder compatibility determined? Compatibility requires matching the insert form, relief angle, tolerance class, fastening method, size and thickness to the chosen holder; ensure the holder accepts a 12 mm square insert with a cylindrical hole and 4.76 mm thickness. Is this insert suitable for finishing operations? With a 0.4 mm corner radius and the T5105 wear properties, the insert is well suited to finishing and light semi-finishing passes, delivering consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a T5115 universal grade for cast iron and a 0.4 mm corner radius to achieve stable chip control and consistent edge life; order the inserts directly via Metav Werkzeuge or contact our consultants for process advice. SNMG120404 T5115 SNMG — CVD-coated indexable insert for turning by Tungaloy The SNMG120404 T5115 SNMG is an ISO-format indexable insert designed for general turning operations, offering a universal grade optimised for cast iron machining. CVD-coated cemented carbide for cast iron Double-sided chipbreaker 0.4 mm corner radius Square plate, 12 mm size Consistent performance for cast-iron turning The T5115 grade combines a CVD-coated surface with a cemented carbide substrate to strike a balance between wear resistance and edge stability. This composition reduces flank wear during interrupted cuts and long runs, resulting in fewer insert changes and a more predictable tool life. In practical terms, the material pairing supports steady production outputs when machining grey or nodular cast iron, where abrasion and brittle fracture of the workpiece demand robust edge behaviour. Geometry that supports reliable surface finish The square plate geometry with a 0.4 mm corner radius and a 90° included angle provides a stable cutting edge that improves dimensional control on external and internal profiles. The slightly rounded corner helps distribute cutting forces and reduces the likelihood of chipping when entering and exiting cuts. Paired with the double-sided chipbreaker, the insert promotes an even surface texture and repeatable results across serial components, which is particularly valuable for batch production and parts with tight tolerances. Secure mounting and broad compatibility Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening and plate thickness; the SNMG120404 conforms to ISO form and size standards to ensure straightforward replacement in compliant holders. The plate’s 4.76 mm thickness and cylindrical hole enable secure clamping, while standard tolerances simplify toolset logistics. This makes integration into existing tool systems efficient and minimises setup time during tool changes. Practical chip control and machining economy The double-sided chipbreaker is engineered for stable chip formation when turning cast iron, reducing cutting interruptions and improving coolant interaction. Stable chip control lowers scrap risk and shortens cycle times, delivering a tangible process efficiency gain. For customers measuring productivity, these inserts contribute to improved uptime and reduced total machining cost per part when used with suitable feeds and speeds. Coating technology and edge durability The CVD coating on the T5115 grade enhances resistance to abrasive wear and thermal softening at the cutting edge, extending useful life in demanding cast-iron applications. The coating also helps preserve the cutting geometry, which supports consistent dimensional quality over longer tool life. When combined with appropriate machining parameters, the coating assists in maintaining a sharp, stable edge under cyclic loads. Recommended applications and tips for best results Designed for external and internal turning, this ISO-format insert is best used with a holder that matches the plate’s form and tolerance class. Select the chipbreaker and insert grade according to the specific cast-iron variant and the rigidity of the setup. For interrupted or heavy cuts, consider more conservative feeds and finishing passes to take full advantage of the insert’s edge stability. The SNMG120404 T5115 insert is particularly suited to series production where repeatability and predictable tool replacement intervals are priorities. Contact Metav Werkzeuge for availability, tool-matching advice and to discuss optimal machining parameters for Tungaloy inserts — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6852984 Manufacturer SKU: TUN6852984 SKU: 6852984-Tungaloy Model series: ISO turning indexable inserts Type designation: SNMG120404 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 90° Special features CVD-coated cemented carbide (T5115) Universal grade for cast iron Double-sided chipbreaker Square plate with cylindrical hole Compatibility depends on form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The SNMG120404 T5115 insert is a universal grade optimised for machining cast iron, delivering balanced wear resistance and edge stability for grey and nodular cast irons. Can the SNMG120404 be used in standard ISO holders? Yes, the SNMG120404 conforms to ISO form and size conventions; compatibility with a specific holder depends on matching form, relief angle, tolerance class, fastening and thickness. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on this insert improves chip control and surface finish, which reduces interruptions and supports steady production in turning operations. Which coating technology is applied to this grade? The insert uses a CVD-coated cemented carbide to enhance abrasive wear resistance and preserve cutting-edge geometry under thermal and mechanical load. What cutting tips improve tool life for cast-iron turning? Use a rigid setup, select a chipbreaker suited to the cast-iron variant, moderate feeds for interrupted cuts, and finish passes to protect the edge; the insert’s geometry and T5115 grade then deliver consistent life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
High wear resistance from the T6215 grade combined with a CVD-coated carbide substrate and a 0.4 mm corner radius improves tool life and surface consistency in demanding turning operations. The square 12 mm format with a double-sided chipbreaker maximises edge economy and reduces changeover time. Order original inserts directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. SNMG120404 T6215 — Tungaloy ISO turning indexable insert for turning The SNMG120404 T6215 is an ISO-format, square turning insert designed for productive machining of stainless steels under stable to lightly interrupted cutting conditions, compatible with standard ISO holders. CVD-coated carbide grade T6215 Double-sided chipbreaker for reliable chip control Square insert, 12 mm nominal size 0.4 mm corner radius, 0° relief angle Precision design for repeatable turning results The square, ISO-format geometry delivers a consistent cutting orientation and predictable seating in standard holders. The 12 mm nominal side and 4.76 mm thickness ensure a rigid contact area that reduces vibration and supports steady cutting forces. A defined 0.4 mm corner radius provides a compromise between edge strength and surface finish, helping to avoid premature edge chipping while maintaining acceptable roughness values. Compatibility is determined by form, relief angle, tolerance class, clamp type and thickness, so the insert integrates into conventional tool systems with predictable repeatability. Coating and grade engineered for stainless steel applications The engineering of the T6215 grade combines a wear-resistant CVD coating with a carbide substrate to handle the work-hardening tendency of stainless steels. The coating improves abrasive resistance and thermal stability, which extends cutting edge life during continuous and slightly interrupted cuts. As a result, cycle times can be optimised and tool-change frequency reduced, yielding lower cost per component in medium- to high-volume turning operations. In practice, the coated carbide construction supports consistent dimensional accuracy across production batches. Chip control that enhances productivity and edge economy A double-sided chipbreaker provides controlled chip formation on both edges, allowing the insert to be indexed and reused, which enhances edge economy and lowers tooling costs per cutting edge. The chip geometry promotes short, manageable chips when machining typical stainless grades, aiding process security and surface quality. In stable setups the chipbreaker contributes to steady feed and speed windows, which improves throughput and can reduce the need for manual chip handling during unattended shifts. Practical system fit and workshop handling The insert is supplied in an ISO plate style with a cylindrical locating hole for secure clamping and compatibility with standard clamp-and-screw systems. The 0° relief angle and 90° orientation support external and internal turning tasks where square inserts are specified, and the 4.76 mm plate thickness provides robustness in heavier cross-sections. Integration into a typical system requires a suitable holder, shim/locating plate and the correct clamp screw; checking the holder form, size and tolerance class ensures safe fixation and repeatable performance. For mixed production environments the reversible edges and standardised code facilitate stocked interchangeability and inventory control. For application-specific supply or technical consultation on the T6215 grade and SNMG120404 inserts, contact Metav Werkzeuge directly at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast delivery. Technical data Article number: 6944766 Manufacturer SKU: TUN6944766 Model series: ISO turning indexable inserts Facts Insert designation: SNMG120404 Grade: T6215 Material: carbide Thickness: 4.76 mm Insert size: 12 mm Corner radius: 0.4 mm Relief angle: 0° Insert angle: 90° Hole: with cylindrical hole Special features Square plate form Double-sided chipbreaker CVD-coated carbide construction Suited for turning stainless steels under stable to slightly interrupted conditions Compatible with ISO holders and standard clamp/screw systems FAQ What materials is this insert best suited for? The SNMG120404 T6215 insert is engineered for machining stainless steels; the T6215 CVD-coated carbide grade provides wear resistance and thermal stability for this application. How many usable cutting edges does the insert provide? With a double-sided chipbreaker and square form, the insert offers multiple indexable edges; exact edge count depends on the holder orientation and indexing practice for the SNMG geometry. Is the SNMG120404 compatible with standard ISO holders? Yes, the insert is an ISO-format indexable plate and is compatible with ISO turning holders that match the plate form, thickness (4.76 mm) and clamping arrangement. What is the significance of the 0.4 mm corner radius? A 0.4 mm corner radius balances edge strength and surface finish, helping to resist chipping while producing acceptable component roughness during turning operations. Does the T6215 grade handle interrupted cuts? The T6215 grade is designed to perform under stable to lightly interrupted conditions; moderate interruptions are acceptable, but heavy interruptions may require alternative grades or cutting strategies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide T6215, a 0.4 mm corner radius and ISO-compliant geometry for consistent turning of stainless steels; the result is extended tool life and stable chip control. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. SNMG120404 T6215 turning insert by Tungaloy The SNMG120404 T6215 is an ISO-standard indexable insert engineered for precision turning of stainless steels in stable to lightly interrupted cuts. CVD-coated carbide grade T6215 Optimised for stainless steel turning Double-sided with cylindrical hole 0.4 mm corner radius, 90° geometry Longer tool life through advanced coating and substrate The proven CVD-coated carbide substrate in grade T6215 provides a durable surface finish and enhanced wear resistance when machining rostfreier Stahl (stainless steels). Chemical vapour deposition (CVD) applies hard ceramic layers that protect the carbide substrate against diffusion wear and built-up edge formation; this translates into fewer tool changes and more productive machining cycles. For shops moving between batch sizes, the coating delivers measurable economy by preserving cutting-edge geometry over longer runtimes. Stable cut and predictable chip control for turning operations The insert’s double-sided design and integrated chipbreaker provide two cutting edges per index, improving tool utilisation while maintaining reliable chip formation. The 0.4 mm corner radius and 90° included angle support robust engagement in external and internal turning, lowering vibration risk and improving surface finish. Operators unfamiliar with chipbreaker behaviour benefit from the consistent chip patterns this geometry produces, which simplifies coolant and speed/feed optimisation. Straightforward integration into ISO tooling systems Manufactured to ISO dimensions, the insert matches holders according to form, clearance angle, tolerance class, fastening and thickness, ensuring mechanical compatibility. The cylindrical hole facilitates stable clamping and easy indexing, while the nominal 4.76 mm plate thickness and 12 mm inscribed circle conform to widely used toolholder families. Using standardised parts reduces setup time and simplifies tool inventory management in mixed-production environments. Application-focused benefits for stainless steel machining Designed specifically for turning, the grade’s wear resistance and chip control make it suitable for continuous and lightly interrupted cuts on stainless steels. The 0° clearance geometry minimises radial interference in constrained setups and helps preserve edge strength when encountering soft, adhesive materials like certain austenitic alloys. Selection of the appropriate chipbreaker and stable machining conditions will yield the best combination of surface quality and tool life. Contact Metav Werkzeuge for application advice or to request the SNMG120404 T6215 insert from Tungaloy; technical consultations are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6944792 Manufacturer article number: 6944792 Manufacturer SKU: TUN6944792 SKU: 6944792-Tungaloy Manufacturer: Tungaloy Facts ISO designation: SNMG120404 Inscribed circle: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 90° Clearance angle: 0° Hole: with hole (cylindrical) Special features Grade/coating: T6215, CVD-coated carbide Plate form: square (SNMG) Chipbreaker: double-sided Typical application: turning (external and internal) Compatible system: ISO indexable turning insert systems FAQ What materials is this insert intended for? The SNMG120404 T6215 insert is formulated for machining rostfreier Stahl (stainless steels) under stable to slightly interrupted cutting conditions. How many cutting edges are available per insert? The insert is double-sided, offering two usable cutting edges per side for efficient indexing and extended tool economy. Does the insert fit standard ISO toolholders? Yes. The SNMG120404 follows ISO dimensions and is compatible with holders that accept SNMG inserts with matching form, thickness and fastening specifications. What does the T6215 grade provide in practice? T6215 is a CVD-coated carbide grade designed to reduce flank and crater wear when turning stainless steels, improving edge life and process stability. Is the insert supplied with a specific hole style for clamping? The insert features a cylindrical hole, which supports secure clamping and reliable repeatability in ISO clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide longevity, a double-sided chipbreaker for reliable chip control and the ISO compatibility that keeps setup consistent; order the SNMG120404 T6215 insert directly via Metav Werkzeuge or consult our team for application advice. SNMG120404 T6215 indexable turning insert — ISO square insert for turning by Tungaloy SNMG120404 T6215 is an ISO-standard square indexable insert engineered for external and internal turning applications, optimised for machining rostfreier Stahl under stable to mildly interrupted cutting conditions. CVD-coated carbide for enhanced wear resistance Designed for rostfreier Stahl machining Square ISO insert, 12 mm size, 4.76 mm thick Double-sided chipbreaker with cylindrical hole Consistent tool life through CVD-coated carbide technology The CVD-coated carbide substrate of this grade delivers enhanced wear resistance, which translates directly into longer tool life and more predictable process windows. Chemical vapour deposition (CVD) forms a thin, hard ceramic layer over the cemented carbide body that resists abrasive wear and built-up edge when machining rostfreier Stahl. For production runs where tool-change intervals must be predictable, this coating reduces downtime and supports steady component quality without complex process tweaks. Easy integration into ISO tool systems for predictable set-up As an ISO-standard square insert, the component offers predictable seating and clamping when used with matching holders. The compatibility is defined by insert form, clearance angle, tolerance class, fastening method, size and thickness; these parameters ensure the insert mounts securely and repeatedly. The item’s ISO designation and square geometry make it straightforward to match with standard external holders or boring bars, reducing trial-and-error at the machine and enabling rapid changeovers in multi-shift environments. Stable cutting and improved surface control with targeted chip management The double-sided chipbreaker supports controlled chip formation across a range of feeds and depths, improving surface finish and evacuation in turning operations. The moderate 0.4 mm corner radius balances edge strength with achievable surface quality: a small radius reduces cutting forces and helps maintain dimensional accuracy on thin-walled workpieces, while still offering sufficient edge robustness for standard interrupted cuts. Selecting the correct chipbreaker and grade according to workpiece material, machining strategy and machine rigidity is essential to unlock consistent productivity. Clear dimensions and practical characteristics for shop-floor decisions Key dimensions and design choices aid in process planning: the insert is a square plate with a nominal size of 12 mm, a plate thickness of 4.76 mm, a cylindrical hole for secure fastening and a 90° reference angle that suits general-purpose turning. The cutting grade T6215 is a CVD-coated carbide specifically intended for rostfreier Stahl; this combination supports stable chip formation and repeatable performance across series production. The compact geometry and standard hole style simplify stocking and replacement logistics for maintenance teams. For precision turning tasks in rostfreier Stahl, contact Metav Werkzeuge for ordering and application support for the Tungaloy SNMG120404 T6215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the right holder and parameters for the job Technical data Article number: 6944733 Manufacturer SKU: TUN6944733 SKU: 6944733-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Reference angle: 90° Clearance angle: 0° Special features Material: carbide Coating: CVD Grade: T6215 ISO designation: SNMG120404 Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning FAQ Which materials is this insert best suited for? The SNMG120404 T6215 insert and its CVD-coated carbide grade are optimised for machining rostfreier Stahl in stable to mildly interrupted cutting conditions. How is compatibility with holders ensured? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening, size and thickness; match these parameters to the chosen holder to secure correct clamping and repeatable seating for SNMG120404. What advantages does the double-sided chipbreaker provide? A double-sided chipbreaker gives reliable chip control across differing feeds and depths, improving evacuation and surface quality while allowing the insert to be indexed to a fresh cutting edge. What are the key dimensions to consider for tool planning? Relevant dimensions are the 12 mm nominal size, 4.76 mm plate thickness, 0.4 mm corner radius and the cylindrical hole; these details guide holder selection and clamping hardware. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
Benefit from the CVD-coated T6215 grade and the double-sided chipbreaker for stable performance when machining stainless steel. The ISO SNMG120404 geometry with a 90° lead and a 0.4 mm corner radius delivers predictable component quality and repeatability. Order the inserts directly via Metav Werkzeuge or consult our specialists for tailored selection advice. SNMG120404 T6215 SNMG — ISO turning insert for turning by Tungaloy A SNMG120404 T6215 ISO turning insert engineered for productive and wear-resistant turning of stainless steels under stable to lightly interrupted conditions. CVD-coated wear-resistant grade Designed for stainless steel machining Double-sided chipbreaker for consistent chips ISO SNMG 120404 geometry, 90° square insert Reliable cutting performance for stainless-steel turning The CVD-coated T6215 grade combines a robust substrate with a chemical vapour deposition layer to extend tool life in demanding conditions. This formulation is optimised for machining stainless steel, reducing flank wear and improving edge stability under moderate interruption. The combination of coating and carbide base results in a more consistent cutting edge, which translates into fewer tool changes and improved uptime on turning centres. For operations that prioritise predictable tool life, the grade offers a measurable benefit in process stability and component quality. Precise geometry and ISO compatibility for easy integration The square 12 mm format, 4.76 mm plate thickness and 90° shape provide a familiar geometry for indexable turning applications, while the 0.4 mm corner radius supports dimensional control on external and internal profiles. The cylindrical hole and standard ISO dimensions ensure compatibility with common SNMG holders and boring bars; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. Clear mechanical interfaces and standardised mounting simplify inventory management and minimise set-up time across different machines and fixtures. Productivity and chip control that support shop-floor goals A double-sided chipbreaker design delivers repeatable chip formation and evacuation for many stainless-steel operations, reducing the risk of built-up edge and improving surface finish. By matching the chipbreaker style and grade to material and machining stability, cutting forces can be stabilised and cycle times optimised. The insert’s reversible nature doubles the effective cutting edges per insert, enhancing cost-efficiency and lowering per-part tooling costs. Together, predictable chips and a robust grade contribute directly to a more economical and reliable turning process. Contact Metav Werkzeuge for a tailored recommendation on Tungaloy SNMG120404 T6215 inserts, or request assistance from our application specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6944791 SKU: 6944791-Tungaloy Manufacturer SKU: TUN6944791 Designation: SNMG120404 T6215 Manufacturer: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Lead angle: 90° Special features Material: carbide Coating: CVD Grade: T6215 Double-sided chipbreaker Cylindrical hole mounting ISO-compliant insert Application: turning of stainless steel FAQ What materials is this insert intended for? The SNMG120404 T6215 insert is specified for machining stainless steel; the CVD coating and grade support wear resistance under stable to lightly interrupted turning. Is the insert compatible with standard SNMG holders? Yes, the SNMG120404 geometry follows ISO dimensions and uses a cylindrical-hole mounting; compatibility is determined by holder form, relief angle, tolerance class, fastening type, size and thickness. How does the double-sided chipbreaker help in production? The double-sided chipbreaker on this indexable insert provides consistent chip formation and evacuation, improving surface finish and reducing the likelihood of built-up edge during turning of stainless steels. Can the insert be rotated to use multiple edges? The SNMG-style square insert is reversible; rotating or flipping the insert allows access to additional cutting edges, effectively extending tool life and lowering tooling cost per component. What are the key dimensional data to check before ordering? Verify the designation SNMG120404, 12 mm size, 4.76 mm thickness, 0.4 mm corner radius and the 90° geometry to ensure correct fit with the intended holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
Robust T6215 grade and precise ISO geometry deliver consistent machining performance for rostfreier Stahl; the CVD-coated carbide construction and square 90° form improve tool life and process stability. Benefit from the 0.4 mm corner radius and double-sided design to reduce tooling costs and maintain surface quality — order the SNMG120404 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120404 T6215 — Indexable turning insert for turning, Tungaloy A SNMG120404 T6215 indexable insert engineered for external and internal turning, optimised for stable to lightly interrupted rostfreier Stahl machining CVD-coated carbide grade T6215 For turning rostfreier Stahl ISO SNMG 120404, square insert Double-sided with cylindrical hole Higher throughput when machining rostfreier Stahl The CVD-coated carbide T6215 grade is tailored for wear resistance and thermal stability, which translates into longer tool life under demanding conditions. In practical terms, the coating reduces flank and crater wear so that cycle times remain steady over longer production runs. Choosing the right chipbreaker and insert grade for the component material preserves edge integrity and keeps downtimes to a minimum, making the insert a cost-effective option for continuous and batch turning of rostfreier Stahl. Precision fit reduces vibration and improves repeatability Conformity to the ISO SNMG format ensures straightforward integration into standard toolholders; compatibility is determined by form, clearance angle, tolerance class, attachment, size and thickness. The square geometry with a 90° cutting edge and 0.4 mm corner radius balances strength and surface finish, while the 4.76 mm plate thickness and cylindrical hole provide secure clamping and repeatable seating. These dimensional traits help to control runout and chip flow, which benefits part accuracy and reduces scrap rates in both external and internal turning operations. Operational reliability and recommended applications Designed as a double-sided indexable insert, the SNMG120404 offers two cutting edges per insert, improving cost per edge and downtime between indexings. The combination of T6215 grade and insert geometry is best suited to stable to lightly interrupted turning of rostfreier Stahl; the insert is also applicable where moderate feed and finishing passes demand a consistent edge. For machining set-ups with less rigidity, selecting an appropriate holder and optimising cutting data to account for stability will secure the expected surface quality and dimensional results. If uncertainty remains about holder compatibility or cutting parameters, technical advice is available to specify the right chipbreaker and holder pairing. If further technical data or application guidance is required, the sales team can assist with specification checks and process recommendations; for queries on compatibility or detailed machining parameters, please contact Metav Werkzeuge at info@metav-werkzeuge.com or by telephone at +49 2822 7131930. For tailored advice on choosing the right Tungaloy SNMG120404 T6215 insert for rostfreier Stahl turning and to arrange procurement through Metav Werkzeuge, contact our specialists for application-specific recommendations and delivery options. Technical data Article number: 6944751 Manufacturer SKU: TUN6944751 Seller SKU: 6944751-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: SNMG120404 Size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 90° Plate form: square Hole style: cylindrical hole Double-sided: yes Grade/coating: T6215 (CVD-coated) Special features Suited for turning (Drehen) Optimised for rostfreier Stahl machining Compatible with standard ISO holders Stable edge for finishing and semi-finishing System set-up: insert, holder, clamping set and screw FAQ What materials are suitable for this insert? The SNMG120404 T6215 indexable insert from Tungaloy is optimised for rostfreier Stahl; selection of the correct chipbreaker and cutting data is recommended for best results. What are the main geometric features of the insert? The insert follows the ISO SNMG120404 geometry with a 12 mm inscribed circle, 4.76 mm thickness, a 0.4 mm corner radius and a 90° cutting angle. Is the insert single- or double-sided and how is it mounted? This SNMG insert is double-sided and features a cylindrical hole for secure mounting in compatible ISO toolholders. Which coating and grade does the insert use? The insert is supplied in T6215 grade with a CVD-coated carbide substrate for improved wear resistance in rostfreier Stahl turning. How to ensure compatibility with existing holders? Compatibility depends on insert form, clearance angle, tolerance class, attachment, size and thickness; verify holder specifications against the ISO SNMG120404 dimensions before use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade (T6215) and a double-sided chipbreaker for efficient, repeatable turning of stainless steels; order the insert directly via Metav Werkzeuge or consult the technical advisors for selection and mounting. SNMG 120404 T6215 — Tungaloy indexable turning insert for turning, CVD-coated carbide, 90° square A SNMG 120404 T6215 indexable insert engineered for external and internal turning, optimised for machining stainless steels under stable to lightly interrupted conditions. CVD-coated carbide grade T6215 Designed for turning stainless steels Double-sided chipbreaker for stable chips ISO square insert, 12 mm size, 90° geometry Consistent performance for stainless steel turning The CVD-coated T6215 grade delivers a combination of wear resistance and thermal stability suited to machining stainless steels under steady cutting regimes. The coating reduces adhesion and flank wear, which helps maintain a predictable cutting edge and consistent surface finish over multiple indexings. With a 0.4 mm nose radius, the geometry balances strength and finish capability, enabling controlled feeds for dimensionally accurate components without sacrificing tool life. Predictable fit and secure clamping for fast tool changes ISO standardisation of the insert geometry ensures compatibility with matching toolholders; fit is determined by form, clearance, tolerance class, fixation method, size and thickness. The square, 90° configuration simplifies toolpath planning for shoulder and external turning operations while the cylindrical hole provides secure seating and repeatable clamping. This compatibility reduces setup time and supports a stable process window across serial production runs. Improved process stability and economical machining A double-sided chipbreaker provides reliable chip formation and evacuation, reducing the risk of built-up edge and improving surface quality. Being indexable on multiple edges lowers tooling cost per cutting edge and shortens machine downtime for insert changes. The robust carbide substrate combined with the CVD finish contributes to longer intervals between regrinds, supporting higher uptime and better overall equipment utilisation. Coating and substrate explained for practical selection The insert’s substrate is cemented carbide, the standard choice for a broad range of turning tasks due to high hardness and toughness. The CVD coating forms a hard outer layer that resists abrasion and thermal degradation; in the T6215 grade this is tuned for adhesion resistance, which is critical when machining stainless alloys prone to work hardening. When lighter interruptions or very aggressive interruptions are expected, select a grade or geometry optimised for those specific conditions to maintain consistent performance. For expert selection and immediate supply of the Tungaloy SNMG 120404 T6215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to confirm holder compatibility and optimal grade matching. Technical Data Article number: 6944739 Manufacturer SKU: TUN6944739 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Designation: SNMG120404 Grade/coating: T6215 (CVD-coated carbide) Core specifications Inscribed circle / size: 12 mm Thickness: 4.76 mm Corner angle: 90° Clearance angle: 0° Nose radius: 0.4 mm Hole: with hole Hole style: cylindrical Shape: square Chipbreaker: double-sided Materials & features Material: cemented carbide Coating type: CVD Typical application: external and internal turning Suitability: machining stainless steels under stable to lightly interrupted conditions System components: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert best suited to machine? The SNMG 120404 T6215 insert is optimised for machining stainless steels, offering adhesion resistance and wear control suited to these alloys under stable and lightly interrupted conditions. Which toolholders are compatible with this insert? Compatibility is determined by the SNMG 120404 form and ISO geometry; the insert requires a matching ISO external holder or boring bar that accommodates a 12 mm square, 4.76 mm thick insert with a cylindrical hole. Is this grade suitable for interrupted cuts? The T6215 grade is intended for stable to lightly interrupted cutting; for heavy interruptions a more impact-resistant grade or different geometry should be considered. How does the chipbreaker improve machining? The double-sided chipbreaker promotes controlled chip formation and evacuation, lowering the risk of built-up edge and improving surface finish and process stability during continuous turning operations. What components are needed to mount the insert? Mounting requires a compatible ISO holder or boring bar, a matching shim/clamp set and replacement screws as part of the standard system assembly Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade (T6215) and the ISO SNMG120404 form to secure stable, repeatable turning of stainless steel under stable to lightly interrupted cutting conditions; the combination of a double-sided chipbreaker and a 0.4 mm corner radius supports consistent chip control and service life. Order or request a specification check via Metav Werkzeuge, or consult our technical team for holder compatibility. SNMG120404 T6215 Turning Insert — ISO indexable insert by Tungaloy The SNMG120404 T6215 is an ISO-pattern indexable turning insert designed for general turning applications, particularly suited to machining stainless steel. ISO-pattern SNMG120404 compatibility CVD-coated carbide grade T6215 Double-sided chipbreaker for stability Square form with cylindrical hole Process efficiency through a CVD-coated carbide grade The CVD-coated carbide composition of this indexable insert is engineered to resist abrasive wear and maintain a stable edge geometry in continuous and lightly interrupted turning. Using a grade T6215 results in longer tool life when machining stainless steel, reducing frequency of insert changes and minimising non-productive time. The robust coating also helps to preserve surface finish, which is beneficial in series production where consistency matters. Predictable chip control and form benefits A double-sided chipbreaker combined with the square SNMG form delivers reliable chip formation across a range of feed rates. The corner radius of 0.4 mm balances edge strength with the ability to produce acceptable surface quality; this small radius reduces cutting forces while maintaining profile accuracy on external and internal turning operations. The presence of a cylindrical hole allows secure clamping and repeatable seating in compatible holders, supporting process stability. Simple integration into ISO-compliant tool systems Compatibility with the toolholder is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness. The SNMG120404 is an ISO-standard insert, which eases selection of matching external holders or boring bars and reduces time spent verifying fit. The 4.76 mm thickness and 12 mm size are typical dimensions that support robust clamping and allow predictable cutting performance in many commercial turning setups. Surface quality and application focus Designed specifically for turning, the insert’s geometry and grade are tuned to manage the work-hardening tendencies of stainless steel while promoting consistent finishes. The combination of Tungaloy engineering and the insert’s features supports repeatable part quality in both single-piece flow and batch production, making it suitable for users seeking dependable, production-ready tooling. Contact Metav Werkzeuge for a tailored specification check or quote for the Tungaloy SNMG120404 T6215 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951012 Manufacturer SKU: TUN6951012 Supplier SKU: 6951012-Tungaloy Model series: ISO-Drehwendeschneidplatten Product name: SNMG120404 T6215 Tungaloy-Wendeplatte Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Included angle: 90° Special features Material: carbide Grade: T6215 (CVD-coated) Chipbreaker: double-sided Shape: square Hole style: cylindrical hole Application: Turning FAQ What materials is this insert suited for? The SNMG120404 T6215 insert is specified for machining stainless steel and performs best under stable to lightly interrupted cutting conditions. How is holder compatibility ensured for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, clamping method, size and thickness; verify these parameters against the chosen external holder or boring bar. Can the insert be used on both external and internal turning operations? Yes, the SNMG120404 geometry and double-sided chipbreaker support both external and internal turning tasks when paired with an appropriate holder. What does the T6215 grade offer compared with uncoated grades? T6215 is a CVD-coated carbide grade that provides improved wear resistance and edge life for demanding turning of stainless steel, which helps to extend productive cutting periods. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide wear resistance, ISO compatibility and a compact corner radius 0.4 mm for reliable turning performance; order directly via Metav Werkzeuge or contact the consultants for application matching and fast delivery. SNMG120404 T6215 — ISO turning insert, CVD‑coated carbide, 0.4 mm radius | Tungaloy A SNMG120404 T6215 indexable insert engineered for ISO‑standard external and internal turning, designed to maintain process stability when machining stainless steels under stable to lightly interrupted cutting conditions. ISO‑standard square insert, 12 mm CVD‑coated carbide grade T6215 Designed for stainless steel turning Double‑sided with 0.4 mm corner radius High wear resistance for stainless steel machining The grade and coating combination deliver a clear advantage when machining stainless steel: CVD‑coated carbide with the T6215 grade provides enhanced wear resistance and thermal stability compared with uncoated grades. This reduces flank wear during longer cycles and helps maintain consistent dimensional tolerances. The coating’s resistance to built‑up edge formation supports stable cutting at moderate feeds and speeds, which in turn contributes to predictable tool life and fewer unscheduled tool changes. ISO compatibility and simple holder matching Supplied in the familiar ISO configuration, the insert is compatible with established holders when form, clearance angle, tolerance class, fastening method, size and thickness are matched. The square shape and the presence of a cylindrical hole allow secure clamping in many standard external holders and boring bars, simplifying tool inventory. Using an ISO‑compliant insert streamlines holder selection and reduces setup time, improving machine uptime and repeatability across batches. Geometry tuned for surface quality and stability The geometry of the insert, including the corner radius 0.4 mm and the double‑sided chipbreaker, is tuned for a balance between finish and edge strength. The relatively small radius supports good surface finish on light finishing passes while still providing enough edge strength for short interruptions. The double‑sided design extends service life by enabling rotation to a fresh cutting edge, and the 4.76 mm thickness contributes to rigidity at the clamping point, reducing vibration and enhancing dimensional control. Practical benefits for production and process reliability Specified for external and internal turning operations, the insert supports productive machining where consistent results and low variation are priorities. The reversible nature and ISO format lower per‑part tooling costs when compared to fully brazed solutions, and the Tungaloy grade selection promotes stable chip formation in common stainless‑steel alloys. For customers seeking application guidance or verification of holder compatibility, technical consultation can ensure the chipbreaker and grade match the workpiece, feed and machining strategy to optimise output and part quality. Contact Metav Werkzeuge for expert matching and rapid supply of Tungaloy SNMG120404 T6215 inserts, including assistance on holder compatibility and recommended cutting parameters Technical Data Article number: 6875699 SKU: 6875699-Tungaloy Manufacturer SKU: TUN6875699 Series: ISO indexable turning inserts Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Lead angle: 90° Clearance angle: 0° Hole: cylindrical hole Design & special features Material: Carbide (CVD‑coated) Grade: T6215 Shape: square Chipbreaker: double‑sided Mounting: with cylindrical hole Application: Turning (external and internal) FAQ Which materials is this insert intended for? The SNMG120404 T6215 insert from Tungaloy is specified for machining stainless steel under stable to lightly interrupted conditions and performs well where good wear resistance is required. Is the insert indexable and reversible? Yes, the square SNMG design is double‑sided, allowing rotation to a fresh cutting edge to extend usable life and reduce tooling costs. What size and thickness does the insert have? The insert measures 12 mm with a thickness of 4.76 mm and a corner radius of 0.4 mm, suitable for a wide range of ISO holders. Does the insert require a specific holder type? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the SNMG120404 fits standard ISO holders that accept square inserts with a cylindrical hole. What advantages does the T6215 grade provide? The T6215 grade is a CVD‑coated carbide that offers improved wear resistance and stable chip formation when turning stainless steel, supporting consistent surface quality and longer tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
Wear-resistant CVD-coated carbide combined with a 0.4 mm corner radius and a double-sided chipbreaker delivers reliable turning performance and consistent surface finish in stainless steels; take advantage of ISO compatibility for easy insertion into standard holders. Order the SNMG120404 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120404 T6215 ISO indexable turning insert for stainless steels — Tungaloy The SNMG120404 T6215 is an ISO-form indexable turning insert designed for stable external and internal turning of stainless steels, combining a wear-resistant CVD coating with a small corner radius for controlled cutting. CVD-coated carbide for wear resistance Double-sided chipbreaker for flexible use 0.4 mm corner radius for controlled cutting ISO SNMG120404, 90° square insert Consistent cutting performance where longevity matters The CVD-coated carbide grade T6215 is formulated for the demands of machining stainless steels under stable to slightly interrupted cutting conditions. The coating improves wear resistance and edge life, which translates into longer production runs and fewer insert changes. With the right cutting data and a stable setup, the coated substrate maintains a sharp edge and supports reproducible part geometry, reducing scrap rates and ensuring a predictable throughput in series production. Geometry and system compatibility for straightforward integration The insert is supplied in the ISO-designation SNMG120404, a 90° square format with a 0.4 mm corner radius and a 4.76 mm plate thickness, featuring a cylindrical hole for secure fastening. These standardised dimensions simplify holder selection and minimise setup time: compatibility with clamping systems is determined by form, relief angle, tolerance class, fastening method, size and thickness. The square form with two usable edges per side and a double-sided chipbreaker increases indexable life and offers economical cutting edge utilisation. Practical advantages during machining operations A small corner radius yields a controlled cutting force and improved surface finish on turned components, particularly when working with tough, strain-hardened stainless steels. The double-sided chipbreaker supports stable chip control across a range of feeds and depths of cut, reducing the risk of built-up edge and facilitating consistent evacuation of chips. The CVD coating reduces flank and crater wear, which helps maintain dimensional stability over longer cycles and supports higher productivity with fewer interruptions for tool changes. Selection, handling and process guidance Choose a chipbreaker and grade that match the workpiece material, cutting conditions and machine rigidity; for the supplied grade, preference is given to stable setups and finishing to medium-depth turning. When mounting the insert, ensure the seat and clamp are clean and the fastening torque follows the holder manufacturer’s specification to avoid runout. Periodic inspection of the cutting edge and adherence to recommended speeds and feeds will extend life; in doubt, consult the technical data sheet for cutting parameters applicable to stainless steels and medium-duty turning. Contact Metav Werkzeuge for tailored advice on the Tungaloy SNMG120404 insert, availability and recommended cutting data — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944778 Manufacturer SKU: TUN6944778 Model series: ISO-Drehwendeschneidplatten Designation: SNMG120404 T6215 Facts Corner radius: 0.4 mm Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Included angle: 90° Hole: with hole (cylindrical hole) Special features Coating / grade: T6215 Carbide type: CVD-coated carbide Chipbreaker: double-sided Suitable application: Turning (external and internal) Plate form: square Compatibility note: holder compatibility determined by form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The SNMG120404 T6215 insert is formulated primarily for stainless steels; the CVD-coated carbide and chipbreaker combination offers good wear resistance and chip control for stable to slightly interrupted turning operations. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s seat form, relief angle, tolerance class, fastening system, size and thickness; the ISO SNMG120404 format fits standard SNMG indexable turning holders when these parameters match. How does the T6215 grade influence cutting performance? The T6215 CVD-coated grade provides enhanced wear resistance and edge life on stainless steels, so users can expect longer tool life and more consistent surface integrity compared with uncoated or less wear-resistant grades. What benefits does the 0.4 mm corner radius deliver? A 0.4 mm corner radius balances edge strength with surface finish: it reduces cutting forces and improves part finish while still allowing controlled material removal for finishing and light-medium turning tasks. How should the insert be mounted and maintained for best results? Mount the insert on a clean, undamaged seat, use the correct clamp and torque, and monitor edge condition regularly; following recommended cutting data and ensuring machine rigidity will maximise the Tungaloy insert’s service life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
Benefit from a wear‑resistant CVD‑coated carbide grade and a precise 0.4 mm nose radius that together ensure consistent performance for turning rostfreier Stahl; order directly via Metav Werkzeuge or contact our consultants for application advice. SNMG120404 T6215 — SNMG 120404 turning insert by Tungaloy (CVD‑coated carbide) SNMG120404 T6215 is an ISO‑standard square turning insert engineered for stable to lightly interrupted cutting when machining rostfreier Stahl. CVD-coated carbide grade T6215 Square SNMG 12 mm insert, 0.4 mm radius Double-sided chipbreaker, with cylindrical hole Consistent performance and extended tool life The combination of CVD coating and a wear‑resistant carbide substrate (grade T6215) provides extended tool life under continuous operation. For machining rostfreier Stahl the coated layer reduces adhesive wear and maintains a stable cutting edge, which translates into fewer indexings and predictable production times. The 0.4 mm nose radius helps achieve precise profiles and good edge strength for both finishing and light turn operations, while the double‑sided geometry delivers economical use of the cutting material. Precision fit and ISO compatibility for reliable setup Designed as an ISO SNMG120404 insert, the geometry and dimensions ensure compatibility with standard SNMG holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The insert is square (12 mm) with a plate thickness of 4.76 mm and a cylindrical hole for secure clamping; the nominal clearance is 0°, and the insert sits at a 90° corner angle for straightforward external and internal turning setups. Specifying the correct holder and clamping kit avoids run‑out and improves concentricity, making setups faster and more reliable. Clear guidance for machining and process efficiency Typical applications include external and internal turning where stability is moderate and interruptions are light. Selecting the appropriate chipbreaker and cutting parameters according to material conditions reduces built‑up edge and improves surface quality. The double‑sided chipbreaker balances chip control and edge life, lowering the frequency of insert changes and supporting a more productive machining cycle. For operations requiring consistent surface finish and tight tolerances, the combination of grade and geometry offers an efficient balance between performance and cost‑effectiveness. Practical handling, indexing and system considerations The insert is indexable with two usable cutting edges per side, enabling quick rotation and replacement to restore cutting performance. A complete machining system comprises the insert, a suitable external holder or boring bar, and the underpinning clamping set with replacement screws; compatibility is primarily determined by insert form and size. Routine checks of clamping torque and holder condition will preserve the integrity of the insert seating and reduce the risk of vibration or premature wear, thereby protecting cycle times and part quality. Trust Tungaloy’s T6215 CVD‑coated inserts for demanding rostfreier Stahl turning — contact Metav Werkzeuge for supply and expert application support via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6944773 Manufacturer SKU: TUN6944773 SKU: 6944773-Tungaloy Type: SNMG120404 Grade: T6215 Material: Hartmetall Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Corner angle: 90° Hole: with cylindrical hole Special features CVD‑coated carbide (grade T6215) Double‑sided chipbreaker Square insert, indexable ISO turning indexable insert series Application: Turning rostfreier Stahl FAQ What materials is this insert best suited for? The SNMG120404 T6215 insert is optimised for machining rostfreier Stahl under stable to lightly interrupted cutting conditions; the T6215 grade targets wear resistance during stainless‑steel turning. What does the T6215 grade indicate? T6215 denotes a CVD‑coated carbide grade developed for enhanced wear resistance and edge stability, improving tool life and enabling consistent cutting performance in corrosion‑resistant alloy machining. How can compatibility with a holder be ensured? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; specify ISO SNMG120404 dimensions and the cylindrical‑hole clamping style when selecting an external holder or boring bar. Is the insert indexable and how many cutting edges are available? Yes — the SNMG120404 T6215 insert is indexable and double‑sided, offering multiple usable edges before replacement; the cylindrical hole supports secure clamping. Which machining tasks are recommended for this insert? Recommended for external and internal turning, especially where stable cutting conditions prevail; pair the chipbreaker style and grade with workpiece stability to achieve optimal surface finish and productive machining. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120404 T6215 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade, a compact 0.4 mm corner radius and a 90° geometry delivers reliable surface quality and consistent tool life for turning operations on stainless steels; order directly via Metav Werkzeuge or consult the technical team for application matching. SNMG 120404 T6215 indexable turning insert — CVD-coated carbide, 0.4 mm radius (Tungaloy) A SNMG 120404 T6215 indexable insert engineered for turning applications, optimised for stainless steel under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Designed for stainless steel turning 0.4 mm corner radius for fine finishes Square insert, 90° cutting angle Reliable machining performance for demanding stainless steel work The CVD-coated carbide substrate in this grade provides a stable cutting edge and consistent wear resistance, which translates into fewer indexings and predictable tool-change intervals. For workshop planners and production engineers, this means improved process stability during external and internal turning where material variability and occasional interruptions can otherwise shorten tool life. The insert’s double-sided chipbreaker aids in chip control, reducing downtime spent clearing swarf and supporting steady cycle times. Geometry and edge preparation that improve surface quality A modest 0.4 mm corner radius combined with the insert’s square form and 90° geometry produces a controlled cutting action that benefits surface finish and dimensional consistency. The short cutting edge radius reduces the tendency for edge chipping when machining stainless steels, while the CVD coating lowers friction and helps maintain surface integrity at elevated temperatures. These technical attributes convert directly into the commercial benefit of fewer reworks and more parts meeting tolerance on first pass. System compatibility and practical handling for production environments This ISO-designated insert is part of a modular system that includes a matching external holder or boring bar, a clamping pad and replacement screws; compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The SNMG format and central hole with cylindrical style allow secure clamping and straightforward indexing. Keeping a consistent insert standard across toolrooms simplifies inventory management and speeds up set-up procedures, supporting lean manufacturing routines and efficient tool logistics. Application guidance and decision criteria for selection Select the chipbreaker and grade pairings based on workpiece stability, cutting conditions and material batch characteristics. The T6215 grade is recommended for stainless steel turning under stable to lightly interrupted conditions; for heavily interrupted cuts or unstable setups, a different combination of chipbreaker and grade should be considered. The insert’s 4.76 mm thickness and 12 mm size provide a robust platform for medium-duty turning, balancing stiffness with versatility in general workshop applications. For tailored advice and fast availability of the SNMG 120404 T6215 insert from Tungaloy, contact Metav Werkzeuge for application support and ordering assistance Technical data Article number: 6875741 Manufacturer SKU: TUN6875741 Brand: Tungaloy ISO designation: SNMG120404 Manufacturer item name: SNMG120404 T6215 Tungaloy insert Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Cutting angle: 90° Central hole: with hole (cylindrical style) Special features Material: carbide Coating: CVD Grade: T6215 Plate shape: square Chipbreaker: double-sided Typical application: turning stainless steels under stable to light interrupted conditions System components: insert, suitable external holder or boring bar, clamping pad and replacement screws FAQ What materials is this insert best suited for? The T6215 grade is tailored for machining stainless steels; the CVD-coated carbide substrate and chipbreaker combination offer wear resistance and chip control for stable turning operations. How does the SNMG 120404 geometry affect part finish? The square form with a 0.4 mm corner radius and 90° cutting angle provides a stable cutting edge that supports consistent surface quality and dimensional accuracy in routine turning tasks. Is the insert reversible and how many cutting edges are available? The SNMG format is double-sided with a double-sided chipbreaker; the insert can be indexed to use multiple edges before replacement, improving cost efficiency per edge. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the SNMG120404 fits standard SNMG holders designed for the same ISO designation. What is the manufacturer article and SKU for reordering? The manufacturer article number is 6875741 and the manufacturer SKU is TUN6875741 for the SNMG120404 T6215 Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com