SNMG 190612 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 CVD-coated grade and robust cemented carbide construction for consistent performance in medium steel turning; combine high wear resistance with a double-sided chipbreaker for cost-efficient, productive machining. Order directly via Metav Werkzeuge or consult our specialists for application matching. SNMG 190612 T9215 indexable insert for turning by Tungaloy — CVD-coated cemented carbide A durable SNMG 190612 indexable insert designed for general turning applications, optimised for medium steel and suitable for continuous to lightly interrupted cuts CVD-coated cemented carbide T9215 Double-sided chipbreaker for reliable chips ISO SNMG190612 square insert, 19 mm Compatible with ISO turning holders High, consistent productivity through wear-resistant grade The T9215 grade combines a CVD coating with a tough cemented carbide substrate to deliver elevated wear resistance and fracture toughness. This balance supports longer tool life under continuous and slightly interrupted cuts and helps maintain component quality across production runs. The result is improved process stability and predictable tool-change intervals, which contribute directly to higher throughput and lower per-part machining costs. Clear compatibility and dimensional certainty for quick setup Designed to the ISO SNMG190612 standard, the insert has a 19 mm inscribed circle, a thickness of 6.35 mm, a corner radius of 1.2 mm and a 90° cutting edge, with a 0° clearance angle and a cylindrical centre hole. These measurable specifications ensure fit and repeatability when paired with the correct outer holder or boring bar, shim/clamp set and replacement screws. Specifying these values reduces setup time and aids selection of the optimal holder and cutting parameters. Effective chip control and application-focused reliability The double-sided chipbreaker geometry is engineered for medium steel machining and provides consistent chip formation and evacuation, reducing the risk of re-cutting and surface defects. For parts requiring reproducible finishes and dimensional integrity, this insert supports stable cutting forces and improved surface quality. The combination of grade and chipbreaker offers a practical blend of reliability, extended tool life and measurable cost efficiency for batch and serial production environments. Contact Metav Werkzeuge for application advice, tool matching and to order this Tungaloy SNMG 190612 T9215 insert — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for immediate assistance Technical data Manufacturer article number: 6773836 SKU: 6773836-Tungaloy Manufacturer SKU: TUN6773836 ISO designation: SNMG190612 Data Inscribed circle / size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Cutting edge angle: 90° Clearance angle: 0° Special features Grade/coating: T9215 (CVD-coated cemented carbide) Insert shape: square Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning; medium steel machining System: ISO insert compatible with outer holder or boring bar; requires shim/clamp set and screws FAQ What materials is this insert best suited for? This SNMG 190612 T9215 indexable insert is formulated for medium steel machining; the T9215 grade combines wear resistance and toughness for continuous to slightly interrupted cuts. How is chip control handled with this insert? The insert features a double-sided chipbreaker, designed to produce consistent chip formation in steel turning operations and to aid reliable evacuation during production. Which dimensions confirm fit in standard holders? Key dimensions are 19 mm inscribed circle, 6.35 mm thickness and a 1.2 mm corner radius; these ISO measurements ensure compatibility with standard SNMG holders. Can the insert be used for interrupted cuts? Yes; the T9215 grade and robust carbide substrate are suitable for continuous machining and are tolerant of light interruptions, offering good fracture resistance. What is the manufacturer SKU for ordering? The product is supplied as SKU 6773836-Tungaloy (manufacturer article number 6773836). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T9225 Wendeplatten - Tungaloy
Taking advantage of a CVD-coated carbide grade and a robust universal geometry, this insert delivers consistent performance for medium to heavy steel turning while maintaining predictable chip control and edge life. Order the SNMG190612 T9225 insert directly via Metav Werkzeuge or ask the consultants if needed. SNMG 190612 T9225 — ISO turning indexable insert by Tungaloy A compact ISO turning insert intended for external and internal turning, designed as a square, double-sided indexable insert for medium to heavy steel machining. ISO SNMG 190612 shape and size CVD-coated carbide T9225 grade 1.2 mm nose radius for versatile profiles Double-sided chipbreaker for stable chips Consistent cutting performance under variable conditions The T9225 CVD-coated carbide grade combines toughness with wear resistance to suit interrupted cuts and changing engagement conditions. This grade was developed for medium to heavy steel machining, offering a balance between edge life and fracture resistance. The CVD coating reduces adhesive wear and helps maintain dimensional stability over longer tool life, which supports predictable process windows and fewer tool changes. The robust substrate also helps to absorb shock loads that occur during interrupted turning. Clear mounting and geometry for reliable set-up The ISO SNMG 190612 format ensures compatibility with standard ISO turning holders when form, clearance angle, tolerance class, clamping method, size and thickness are matched. The insert features a quadrilateral form with a cylindrical hole, 6.35 mm thickness and a 90° approach, enabling straightforward clamping and repeatable seating in indexable holders. These defined dimensions ease fixture selection and reduce set-up time, improving first‑pass accuracy and reproducibility in production runs. Improved chip control and profile versatility Equipped with a double-sided chipbreaker and a 1.2 mm nose radius, the insert supports stable chip formation and consistent surface finish when turning steels. The chosen radius permits both profile work and light radius profiling without frequent tool swaps, while the chipformer design directs chips away from the workpiece and toolpost, aiding process safety and post‑machining handling. For shops prioritising uptime, the combination of geometry and grade reduces unexpected stoppages and maintains throughput. For purchases or technical advice on the Tungaloy SNMG 190612 T9225 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance and local availability. Technical data Article number: 6780782-Tungaloy Manufacturer article number: 6780782 SKU: TUN6780782 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Approach angle: 90° Relief angle: 0° Special features Grade/coating: T9225 (CVD-coated carbide) Shape: square / quadrilateral Hole: with cylindrical hole Chipbreaker: double-sided Typical application: Turning (external and internal) Compatibility: ISO-standard insert — fits matching ISO holders FAQ What materials is this insert suitable for? The SNMG 190612 T9225 insert is designed as a robust universal grade for medium to heavy steel machining, providing reliable performance under varying engagement conditions. How does the T9225 grade affect tool life? Tungaloy's T9225 CVD-coated carbide offers enhanced wear resistance and toughness, which together extend edge life during interrupted cuts and reduce the frequency of tool changes. Which holder types are compatible with this SNMG insert? Compatibility depends on matching the insert form, clearance angle, tolerance, clamping method, size and thickness; the ISO SNMG 190612 format fits standard ISO turning holders when these parameters correspond. What benefits does the double-sided chipbreaker provide? The double-sided chipbreaker ensures predictable chip control and improved surface finish, reducing the risk of entanglement and helping to maintain process stability. Is the 1.2 mm radius suitable for finishing passes? A 1.2 mm nose radius offers a compromise between strength and finish capability, allowing modest profiling and acceptable surface quality without frequent tool swaps. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, ISO-standard compatibility and a 1.2 mm corner radius for stable medium-to-heavy steel turning; order directly via Metav Werkzeuge or ask the consultants for tailored machining advice. SNMG 190612 T9225 indexable turning insert — Tungaloy, for turning SNMG 190612 T9225 is an ISO-standard, square indexable insert designed for turning applications where variable engagement and interrupted cuts demand toughness and reliable chip control ISO-standard square insert CVD-coated carbide universal grade 1.2 mm corner radius for strength Double-sided chipbreaker for stable performance Consistent cutting performance when conditions vary The CVD-coated carbide construction provides a balance of hardness and toughness, making this insert suitable for medium to heavy steel machining where changing engagement or light interruptions occur. The robust universal grade offers longer edge life under fluctuating loads, while the double-sided chipbreaker helps maintain stable chip formation and reduces the risk of built-up edge. For production environments, this results in fewer tool changes and more predictable cycle times, supporting efficient workflow and process reliability. Designed for straightforward integration into ISO tooling systems Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; the insert’s ISO designation 190612 and square form simplify selection for standard external and internal turning holders or boring bars. The 0° relief angle and 90° lead angle specification match common holder geometries, and the cylindrical hole ensures secure clamping with standard screws and pads. Clear matching of insert geometry to the clamping system reduces set-up time and supports repeatable tool positioning. Practical advantages for workshop productivity and material range A 1.2 mm corner radius gives a compromise between edge strength and surface finish, lowering the risk of corner chipping in heavy cuts while still enabling satisfactory surface quality. The insert’s thickness of 6.35 mm contributes to stiffness and vibration resistance in robust machining conditions. As a CVD-coated carbide insert, it is optimised for steel applications and chosen where stable chip formation and reliable cutting performance are priorities, making it a practical choice for mixed-batch and series production. Contact Metav Werkzeuge for advice on integrating Tungaloy SNMG 190612 T9225 inserts into existing toolsets; email info@metav-werkzeuge.com or call +49 2822 7131930 for application-specific recommendations Technical data Article number: 6780932 Manufacturer SKU: TUN6780932 Seller SKU: 6780932-Tungaloy Facts ISO designation: 190612 Corner radius: 1.2 mm Thickness: 6.35 mm Lead/angle: 90° Relief angle: 0° Hole: cylindrical Special features Material: CVD-coated carbide Grade: T9225 (robust universal) Shape: square insert Chipbreaker: double-sided Typical application: turning FAQ What materials is this insert intended for? The SNMG 190612 T9225 insert is formulated for steel machining, specifically for medium to heavy turning where robustness and versatile chip control are required. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO geometry (190612) and is compatible with holders that match the form, relief angle, tolerance class, fixing method, size and thickness of the insert. How does the double-sided chipbreaker help in machining? The double-sided chipbreaker supports consistent chip formation and evacuation on both sides of the insert, improving stability during varying engagement and helping to reduce built-up edge. Can the insert handle interrupted cuts? The T9225 grade provides increased toughness for light to moderate interruptions; the combination of grade and 1.2 mm corner radius lowers the risk of chipping under changing cutting conditions. What clamping provisions are required for the cylindrical hole? Standard clamping systems using an insert screw, pocket or clamp suited to the ISO 190612 form are appropriate; the cylindrical hole is designed for secure and repeatable fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T9225 Wendeplatten - Tungaloy
The CVD-coated T9225 grade and carbide substrate deliver robust performance for medium to heavy turning, while the ISO SNMG190612 geometry and 1.2 mm corner radius ensure stable chip control and secure clamping; order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMG 190612 T9225 square turning insert by Tungaloy — CVD-coated carbide, 1.2 mm radius SNMG190612 T9225 Tungaloy insert for ISO-compliant external and internal turning; engineered for demanding steel applications where intermittent cuts or variable engagement demand increased toughness CVD-coated carbide T9225 for robust cutting ISO SNMG190612 — standardised compatibility 1.2 mm corner radius for versatile turning Double-sided chipbreaker with cylindrical hole Consistent metal removal with fewer interruptions The CVD-coated carbide composition combines wear resistance with a degree of toughness that is beneficial for medium to heavy steel machining. The T9225 grade is formulated to tolerate changing engagement conditions and light interruptions, which reduces the risk of premature edge failure. As a result, higher process stability is enabled and fewer tool changes are required, improving overall machining uptime and contributing to a predictable production flow. Geometry designed for secure clamping and repeatable positioning The ISO SNMG190612 geometry, featuring a square form and a cylindrical hole, ensures consistent fitment in standard external holders and boring bars. The 0° relief angle and 6.35 mm thickness provide a stable support zone under load, while the 1.2 mm corner radius balances strength with the capability to produce acceptable surface finishes on shoulder and profile turns. This configuration simplifies holder selection and supports reproducible set-ups across batch runs. Chip control and edge life optimised for industrial use A double-sided chipbreaker integrated into the insert geometry directs chips reliably for turning operations, reducing re-cutting and improving thermal distribution at the cutting edge. The T9225 coating system helps maintain a stable cutting edge under fluctuating conditions, which contributes to longer effective edge life and consistent component tolerances. For workshops prioritising throughput and fewer interruptions, this insert provides a pragmatic balance of performance and durability. Application guidance and compatibility considerations Designed primarily for turning steel components, the insert is intended to be used with compatible ISO holders where form, relief, tolerance class, attachment, size and thickness match. Selection of the correct chipbreaker version and holder rigidity is decisive for best results; in less rigid set-ups the tougher T9225 grade compensates for variable cutting conditions. For unfamiliar set-ups, brief trial cuts with adjusted feeds and speeds are recommended to confirm optimal parameters. Discuss SNMG190612 Tungaloy inserts with Metav Werkzeuge for tailored recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 to determine the ideal grade and holder combination for the application Technical Data Article number: 6780689 Manufacturer SKU: TUN6780689 Model series: ISO-Drehwendeschneidplatten Material: carbide Grade / coating: T9225 Data Corner radius: 1.2 mm Relief angle: 0° Plate thickness: 6.35 mm Plate size: 19 mm Included hole: cylindrical Special features ISO SNMG190612 geometry Square form insert Double-sided chipbreaker CVD-coated cemented carbide Compatible with standard external holders Suited for medium to heavy steel turning Secure clamping via centre hole FAQ What materials is this insert intended for? The SNMG190612 Tungaloy insert in T9225 is intended primarily for machining steel in medium to heavy turning applications. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius improves edge strength for interrupted cuts and allows acceptable surface finishes on shoulders while reducing the likelihood of edge chipping during heavier engagements. Is the insert reversible or single-use? The SNMG190612 is a double-sided turning insert, enabling indexable use of both cutting edges to extend usable life before replacement. Which holders are compatible with this ISO insert? Compatibility depends on matching the ISO SNMG190612 form, relief angle, tolerance class, attachment and thickness; the insert is compatible with standard ISO SNMG external holders and boring bars. Does the T9225 coating improve wear resistance? The T9225 CVD coating enhances wear resistance while retaining sufficient toughness for variable cutting conditions, contributing to longer edge life and steady performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T9235 Wendeplatten - Tungaloy
Robust CVD-coated carbide in a compact ISO format provides dependable performance for unstable and interrupted cuts; paired with a square, double-sided geometry and a 1.2 mm corner radius, this insert supports consistent chip control and repeatable indexing. Benefit from ISO compatibility and a standard system setup for quick integration on common turning toolholders. Order the SNMG190612 T9235 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG190612 T9235 ISO turning insert for external and internal turning — Tungaloy A SNMG190612 T9235 indexable insert designed for ISO-standard turning applications, optimised for steel machining under unstable conditions and interrupted cuts CVD-coated carbide grade T9235 for steel Square ISO insert, 19 mm size, 6.35 mm thick Double-sided chipbreaker, 1.2 mm corner radius Cylindrical hole, 90° included angle Reliable cutting performance in unstable conditions The combination of a CVD-coated surface and a cemented carbide substrate gives a balance of toughness and wear resistance that suits lower cutting speeds and interrupted machining. The specified grade is engineered to maintain a stable cutting edge where vibrations or intermittent contact occur, which leads to fewer edge failures and longer effective tool life. For workshops aiming to keep cycle times steady despite challenging setups, this geometry reduces unplanned downtimes and supports predictable process output. Controlled chips and repeatable edge location A double-sided chipbreaker coupled with a 1.2 mm corner radius ensures consistent chip formation and evacuation during both external and internal turning. The square form and cylindrical hole enable precise seating in standard toolholders, while the 90° included angle allows for versatile turning strategies. These features simplify index changes and minimise setup variability, translating into more consistent surface finish and reduced need for rework on serial production parts. ISO compatibility for simplified tool management As an ISO-standard SNMG190612 insert, compatibility with appropriate holders is governed by form fit, clearance angle, tolerance class, fixing method, size and thickness. The standardised dimensions and the 6.35 mm plate thickness reduce tooling variants in stock and make spare management straightforward. A complete system comprises the insert, a suitable external holder or boring bar, a shim/clamping kit and replacement screws, enabling quick reuse of existing clamping hardware where applicable. Application advice and integration support Designed primarily for turning steel components, the insert’s tough composition is particularly beneficial when cuts are intermittent or when setup rigidity is limited. Selection of the correct chipbreaker and grade should match the workpiece material, machining strategy and fixture stability to achieve optimal results. Assistance is available from Metav Werkzeuge for selection, holder matching and process recommendations to ensure the insert performs as intended in the specific production environment. For tailored selection, availability and advice on integrating the SNMG190612 T9235 insert into existing tooling systems, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss specification and delivery options Technical Data Article number: 6786023 SKU: 6786023-Tungaloy Manufacturer SKU: TUN6786023 Manufacturer: Tungaloy Facts Insert designation: SNMG190612 Grade: T9235 Material: cemented carbide Coating: CVD Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Included angle: 90° Clearance angle: 0° Special features Square insert form Cylindrical hole for screw clamping Double-sided chipbreaker ISO-standard turning insert Intended application: turning (external and internal) Optimised for steel and interrupted cuts Compatible with standard ISO holders and clamping kits FAQ Which materials is this insert suitable for? The SNMG190612 T9235 insert is formulated for steel machining; the CVD-coated cemented carbide and the T9235 grade deliver toughness for interrupted cuts and less rigid setups. Is the insert indexable and how many cutting edges are available? The square, double-sided design provides multiple indexable edges; the exact number of usable edges depends on the chipbreaker pattern and regrinding policy. What holder features are required for correct compatibility? Compatibility is determined by insert form, clearance angle (0°), tolerance class, fixing method, size (19 mm) and thickness (6.35 mm); a matching ISO toolholder or boring bar and proper clamping hardware are required. How does the chipbreaker benefit machining performance? The double-sided chipbreaker promotes consistent chip formation and evacuation, improving surface finish and reducing the risk of chip jamming in interrupted cuts. Can the insert be used for finishing operations? While the grade is optimised for toughness in unstable conditions, selecting appropriate cutting parameters and a finer feed can make it suitable for certain finishing tasks on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade engineered for steel, a double‑sided chipbreaker for consistent chip control, and a compact 90° square geometry that simplifies tool set‑up; order the insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 190612 T9235 — Turning insert (for turning) by Tungaloy The SNMG 190612 T9235 is an ISO‑standard, CVD‑coated carbide turning insert designed for external and internal turning of steel, optimised for unstable or interrupted cutting conditions. ISO‑standard SNMG insert, cylindrical hole CVD‑coated carbide grade T9235 for steel Double-sided chipbreaker for chip control 1.2 mm corner radius, 90° geometry Greater efficiency through material and coating choice The CVD‑coated carbide grade T9235 provides a balance of toughness and wear resistance that is particularly suitable for turning steel at lower cutting speeds and where conditions are less stable. By choosing this coating and substrate combination, the cutting edge resists chipping during interrupted cuts and maintains a reliable tool life; this delivers measurable productivity gains and reduces unscheduled tool changes. The design focuses on deliverable performance rather than theoretical maximum speeds, making it a pragmatic choice for mixed production environments. Predictable behaviour under interrupted and unstable cuts A square, 90° geometry combined with a double‑sided chipbreaker creates controlled chip formation even when feeds vary or the material presents instabilities. The 1.2 mm corner radius blends edge strength with dimensional control, so components retain form accuracy while benefiting from robust edge security. Where machining involves recurring interruptions—such as keyways, grooves, or workpiece clamping—the insert’s configuration reduces the risk of edge fracture and supports consistent surface finish without aggressive parameter tuning. Simple mounting and broad holder compatibility The insert follows ISO dimensions so compatibility with a wide range of external holders and tool posts is straightforward; fit is determined by form, clearance angle, tolerance class, clamp method, size and thickness. The plate’s cylindrical hole and standard thickness of 6.35 mm permit reliable clamping and straightforward replacement, reducing set‑up time. Because the grade and chipbreaker are optimised for steel, selection of holder geometry can focus on rigidity and reach, improving process stability across different turning tasks. For applications requiring dependable performance in interrupted or unstable steel turning, contact Metav Werkzeuge to discuss availability of the Tungaloy SNMG 190612 T9235 insert and to receive tailored machining advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6785871 Manufacturer SKU: TUN6785871 SKU: 6785871-Tungaloy Model series: ISO‑Drehwendeschneidplatten Application: Turning Facts Corner radius: 1.2 mm Insert size: 19 mm Plate thickness: 6.35 mm Geometry angle: 90° Relief angle: 0° Manufacturer article number: 6785871 Special features ISO designation: SNMG190612 Grade/coating: T9235 (CVD‑coated carbide) Material: carbide Plate form: square Hole: with cylindrical hole Chipbreaker: double‑sided Typical applications: external and internal turning; interrupted cuts FAQ What materials is this insert intended for? The SNMG 190612 T9235 turning insert from Tungaloy is formulated primarily for steel machining and excels at lower cutting speeds and interrupted or unstable cutting conditions. How does the grade T9235 affect machining performance? Tungaloy’s T9235 CVD‑coated carbide provides toughness and thermal resistance that help prevent chipping during interrupted cuts, meaning the SNMG 190612 T9235 insert sustains tool life under challenging steel turning tasks. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, relief angle, tolerance class, clamping method, size and thickness; the SNMG190612 geometry and cylindrical hole align with common ISO external holders and boring bars suited to square inserts. What advantages does the double‑sided chipbreaker offer? The double‑sided chipbreaker on the SNMG 190612 insert promotes consistent chip control on both faces, improving process reliability and helping to maintain surface finish when feeds or material properties vary. Can this insert be used for internal turning? Yes; the SNMG 190612 T9235 insert is suitable for internal as well as external turning, provided the chosen holder offers the required rigidity and clearance for the intended operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190612 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, precise ISO compliance and straightforward holder compatibility for consistent turning results; order the insert directly via Metav Werkzeuge or consult our technical advisors for process matching. SNMG 190612 T9235 turning insert — Tungaloy carbide, square, 90° The SNMG190612 T9235 is an ISO‑standard square turning insert designed for external and internal turning of steel, offering a tough CVD‑coated carbide grade for interrupted and unstable cutting conditions. CVD-coated carbide T9235 ISO form SNMG190612 Double-sided chipbreaker, with hole Suited to unstable cuts and low speeds Consistent cutting performance where toughness matters The CVD-coated T9235 grade is formulated for toughness rather than maximum wear resistance, making it well suited to steel turning under unstable conditions and interrupted cuts. The coating provides improved edge protection while the carbide substrate maintains fracture resistance; this combination reduces the risk of edge chipping during shock loads and contributes to predictable tool life. The rational choice of a tougher grade supports stable production and fewer unexpected tool failures, which helps sustaining throughput in mixed‑batch machining. Easy integration with ISO‑compliant tool systems Marked as ISO‑compliant SNMG190612, the insert integrates into any matching ISO holder when the form, relief angle, tolerance class, clamping method, size and thickness align. The square plate with a 90° included angle and a 0° relief angle affects cutting geometry and approach; a cylindrical centre hole enables positive clamping and repeatable seating. Clear adherence to ISO dimensions simplifies tool inventory and replacement, reducing set‑up time and the need for bespoke holders. Design features that improve productivity and finish The insert’s double-sided chipbreaker and square geometry offer two usable edges per indexed side, increasing effective life per insert and delivering stable chip formation. The 1.2 mm corner radius balances edge strength with surface finish: a larger radius improves robustness and component integrity, while still allowing acceptable surface quality for many turning operations. The 6.35 mm plate thickness ensures rigidity in the clamped condition, reducing vibration and fostering consistent workpiece tolerances. Application guidance for effective machining This insert is optimised for turning steel at moderate to lower cutting speeds where interrupted cuts or unstable set‑ups occur. The combination of the robust grade and chip control helps maintain process security when cutting parameters fluctuate. For selection of the matching holder, clamping set and replacement screws, Metav Werkzeuge can provide specification support to ensure the insert seats correctly and the system achieves the intended performance. Practical alignment of insert geometry and machine stability yields the most tangible productivity gains. Contact Metav Werkzeuge for personalised advice on Tungaloy turning inserts and holder compatibility — phone or email our technical team for machining recommendations and ordering support Technical data Article number: 6786044 Manufacturer SKU: TUN6786044 SKU: 6786044-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Carbide Facts Corner radius: 1.2 mm Plate size: 19 mm Plate thickness: 6.35 mm Included angle: 90° Relief angle: 0° Hole style: cylindrical hole Special features ISO designation SNMG190612 Grade: T9235 (CVD‑coated carbide) Double‑sided chipbreaker Square plate form with bore Intended application: turning (external and internal) Suitable for interrupted and unstable cuts Compatibility determined by form, relief angle, tolerance class, clamping and thickness System concept: ISO insert + matching outer holder or boring bar, backing/clamping set and replacement screws FAQ What materials is this insert suitable for? The Tungaloy SNMG190612 T9235 insert is intended primarily for steel machining and performs well in interrupted and unstable cutting conditions. How many cutting edges are available per insert? With a double‑sided chipbreaker and square form, the insert provides multiple usable edges when indexed, extending effective tool life. What does the T9235 grade mean in practice? T9235 is a CVD‑coated carbide grade chosen for its toughness, offering resistance to fracture under interrupted cuts and lower cutting speeds. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, relief angle, tolerance class, clamping style, size and thickness; the SNMG190612 dimensioning follows ISO standards for straightforward matching. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and helps maintain component integrity under heavy or interrupted cuts while still allowing reasonable surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 AH120 Wendeplatten - Tungaloy
Benefit from a combination of PVD-coated AH120 grade, robust chip control and ISO compatibility for dependable turning performance; order the SNMG190616 AH120 insert directly via Metav Werkzeuge or consult our specialists for holder matching and application advice. SNMG190616 AH120 turning insert, square form by Tungaloy SNMG190616 AH120 is an ISO-standard indexable insert for external and internal turning, engineered for process-secure, wear- and break-resistant cutting in demanding production environments SNMG form, ISO 190616, 90° geometry PVD-coated cemented carbide AH120 grade Double-sided chipbreaker, sharp cutting edge Compatible with standard external/internal holders Predictable mounting and robust shoulder turning for continuous production The SNMG190616 conforms to ISO 190616, offering a clearly defined form and tolerance set that simplifies tool selection and reduces setup variability. The 90° geometry provides a strong shoulder angle that supports heavier axial forces during facing and shoulder operations, while the square shape increases indexing options to extend tool life. Specified values for plate size and thickness ensure repeatable mounting in compatible holders, so production runs remain stable and downtime is minimised. Controlled chip flow and surface quality from a balanced corner radius With a 1.6 mm radius and a double-sided chipbreaker, the insert balances edge strength and surface finish: the corner radius resists edge chipping on interrupted cuts, while the chipbreaker shapes and controls chips to prevent entanglement and ensure consistent surface quality. The 0° relief angle gives a positive cutting stance for many turning tasks; the chipbreaker geometry is particularly beneficial where reliable swarf evacuation and predictable tool behaviour are required, reducing rework and improving first-pass yield. Durable grade and coating for extended tool life and process security The cutting edge is made from cemented carbide and finished with a PVD coating in the AH120 grade, formulated for wear resistance and fracture toughness in turning operations. This combination supports a sharp cutting edge that maintains dimensional accuracy over longer cycles and offers enhanced process security under varying cutting conditions. For best results, pair the insert with a holder that matches the form, clearance angle and tolerance class so the system delivers consistent components and lower tooling costs per part. Contact Metav Werkzeuge today for tailored holder recommendations, delivery options and to secure SNMG190616 AH120 inserts for immediate integration into production Technical data Manufacturer article number: 6811989 SKU (manufacturer): TUN6811989 Stock SKU: 6811989-Tungaloy Facts Insert designation: SNMG190616 Corner radius: 1.6 mm Insert size: 19 mm Thickness: 6.35 mm Relief angle: 0° Geometry angle: 90° Special features PVD-coated cemented carbide, grade AH120 Double-sided chipbreaker Square insert form (quadratic) With cylindrical hole for clamping System composition: insert, compatible holder, clamp set and replacement screws FAQ What operations are suitable for this insert? The SNMG190616 AH120 insert is designed for external and internal turning; it is particularly effective for shoulder turning and general finishing or medium-duty roughing where a 90° geometry is advantageous. How does the AH120 grade improve performance? The AH120 grade combines a PVD coating with a wear-resistant cemented carbide substrate to provide enhanced edge strength and fracture resistance, resulting in longer tool life and greater process security during turning. Which holders are compatible with this insert? Compatibility depends on holder form, clearance (relief) angle, tolerance class, clamping method, size and thickness; Metav Werkzeuge can recommend matched external or boring holders for the SNMG190616 insert. How does the chipbreaker affect chip control? The double-sided chipbreaker on this insert shapes chips to ensure controlled evacuation and reduces the risk of chip accumulation, improving safety and surface quality on continuous and interrupted cuts. Is the insert indexed or single-use? The SNMG190616 is an indexable insert with multiple usable cutting edges; the square form provides several indexing positions to extend effective tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 carbide, a double-sided chipbreaker and ISO compatibility for secure, repeatable turning operations; order the SNMG190616 AH120 insert directly via Metav Werkzeuge or contact our consultants for application advice. SNMG 190616 AH120 — Turning insert by Tungaloy The SNMG190616 AH120 is an ISO‑standard square turning insert designed for external and internal turning where a sharp cutting edge and high process security are required. ISO-standard square insert, 19 mm PVD-coated AH120 carbide grade Double-sided chipbreaker for stable chips 1.6 mm corner radius, 0° relief angle Consistent cutting performance through wear-resistant grade The combination of a PVD-coated surface and the AH120 carbide formulation delivers a wear- and fracture-resistant cutting edge tailored for demanding turning operations. This coating reduces flank wear and helps maintain a sharp cutting edge for longer tool life, which results in fewer insert changes and improved uptime. The benefit is a more predictable process and reduced variability in component tolerance, making the insert suitable for production environments that prioritise consistency and repeatability. Clear compatibility and rapid tool set-up As an ISO‑standard insert, the component integrates with a wide range of compatible holders; compatibility is determined by shape, relief angle, tolerance class, clamping method, size and thickness. The square form and cylindrical hole provide straightforward fixing with common clamping systems, while the 6.35 mm plate thickness contributes to stable clamping and resistance against vibration. This design reduces set-up time and simplifies interchangeability in mixed‑tool toolrooms. Reliable chip control for safer productivity The double-sided chipbreaker geometry is engineered to produce controllable chips during turning, improving evacuation in both external and internal operations. Controlled chip formation reduces the risk of surface damage and tool edge deterioration, which enhances process security and operator safety. The 1.6 mm corner radius balances edge strength and cutting performance, providing a compromise between robustness and fine finishing capability. Application guidance and selection tips Select this insert when a combination of sharp cutting edge and high process reliability is required; it is particularly effective where frequent insert indexing and consistent parts quality are priorities. Choose a chipbreaker and grade that match the workpiece material and stability of the set-up to fully exploit the AH120 advantages. When in doubt about holder compatibility or optimal cutting data, refer to the ISO designation and the insert geometry to ensure correct integration into the tool system. For technical advice, compatibility checks or to secure fast delivery of Tungaloy SNMG190616 AH120 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑oriented support Technical data Article number: 6806913 Manufacturer item no.: 6806913 SKU: 6806913-Tungaloy Manufacturer SKU: TUN6806913 Product name: SNMG190616 AH120 Tungaloy insert Dimensions & geometry Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Shape: square Hole: cylindrical Materials & features Material: carbide Coating/grade: AH120, PVD Chipbreaker: double-sided Application: turning (external and internal) Cutting angle: 90° FAQ Is the SNMG190616 AH120 insert compatible with my ISO holders? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the SNMG190616 AH120 follows ISO standards to simplify selection. What advantages does the AH120 grade provide? The AH120 grade offers a wear‑ and fracture‑resistant cutting edge with a PVD coating that improves tool life and process security during turning. Can the insert be indexed to use multiple cutting edges? Yes, the square geometry and double-sided design allow indexing to use additional edges, extending the insert's service life. What chip control can be expected from this insert? The double-sided chipbreaker is designed for stable chip formation and evacuation, reducing surface damage and improving machining safety. Which operations is this insert intended for? This insert is intended for external and internal turning where a sharp cutting edge and reliable, repeatable performance are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 AH6225 Wendeplatten - Tungaloy
Take advantage of a proven combination of ISO compatibility, a sharp yet durable cutting edge, and secure clamping for uninterrupted turning operations; order original Tungaloy inserts through Metav Werkzeuge or request tailored advice from our consultants. SNMG 190616 AH6225 Turning indexable insert by Tungaloy — 90° geometry, 1.6 mm corner radius SNMG190616 AH6225 Tungaloy insert is an ISO-format indexable insert designed for general turning applications, especially where machining of stainless steels is required; its square form and standard fit enable straightforward integration into common external and internal turning toolholders. PVD-coated carbide AH6225 for stainless steel Double-sided chipbreaker for consistent chips Square ISO insert SNMG 190616 with cylindrical hole 1.6 mm corner radius and 90° cutting geometry Optimised fit for standard ISO holders and secure clamping Compatibility is ensured by the ISO dimensions and by matching the insert’s form, relief angle, tolerance class, fastening method, size and thickness to the chosen holder. The square plate with a cylindrical hole and 90° included angle gives reliable seating and repeatable positioning; this reduces setup variation and supports continuous production. The 0° relief angle and 1.6 mm radius are designed to deliver a balanced combination of strength and finish, so tool paths remain stable even when machining interrupted cuts or variable workpiece conditions. Predictable cutting performance with a universal PVD grade The AH6225 grade is a PVD-coated carbide developed as a universal solution for stainless steel: it presents a sharp yet stable cutting edge suited to medium machining parameters and fluctuating conditions. The double-sided chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built-up edge and contributing to consistent surface quality. The coating improves wear resistance and thermal stability, which together extend effective tool life and increase process reliability during serial production. Practical guidance for system setup and application For best results, pair the indexable insert with a compatible external holder or boring bar, an appropriate shim or clamping kit, and the correct replacement screws; the system should be selected taking into account workpiece material, machining stability and desired surface finish. The insert is suitable for both external and internal turning when the correct chipbreaker and holder geometry are chosen. If process stability or material mix requires adaptation, adjustments to cutting parameters and coolant strategy will typically yield improved cycle times and repeatable quality. Contact Metav Werkzeuge for application-specific recommendations on using the Tungaloy SNMG 190616 AH6225 insert in turning operations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903201 SKU: 6903201-Tungaloy Manufacturer SKU: TUN6903201 Designation: SNMG190616 AH6225 Tungaloy insert Model series: ISO-Drehwendeschneidplatten Material: Carbide Coating: PVD Facts Plate size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Included angle: 90° Hole: with cylindrical hole Special features Double-sided chipbreaker Square plate form Suitable for external and internal turning Universal grade for stainless steel Sharp, stable cutting edge for medium machining ISO-compliant dimensions FAQ Is this insert suitable for stainless steel alloys? The Tungaloy SNMG190616 AH6225 indexable insert is specified as a universal grade for stainless steel machining and is optimised to maintain a sharp, stable cutting edge under varying conditions. Can the insert be used for internal turning on a boring bar? Yes; the square SNMG format and the specified dimensions allow use in compatible holders and boring bars for internal turning when the holder provides sufficient support and rigidity. What benefits does the PVD coating provide? The PVD coating on the AH6225 grade enhances wear resistance and thermal stability, which supports longer tool life and more consistent cutting performance in stainless steel applications. How does the chipbreaker contribute to process stability? The double-sided chipbreaker promotes predictable chip formation and evacuation, reducing the likelihood of built-up edge and improving surface finish and cycle consistency. Which components make up the basic tooling system for this insert? A complete system comprises the indexable insert, a matching external holder or boring bar, an underlay or clamping set and the correct replacement screws; compatibility depends on form, relief angle and tolerance class of the holder Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6235 carbide, tailored chip control and ISO compatibility for consistent stainless steel turning; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMG 190616 AH6235 turning insert — Turning — Tungaloy SNMG190616 AH6235 Tungaloy indexable insert for ISO-conformant turning operations, designed for dependable performance in demanding stainless steel and interrupted-cut applications PVD-coated carbide grade AH6235 Optimised for stainless steel turning Double-sided chipbreaker for secure cutting 90° square form, 6.35 mm thickness Consistent machining performance for demanding turning tasks The SNMG190616 AH6235 insert combines a PVD-coated surface with a tough carbide substrate to deliver improved resistance against chipping during unstable cuts. The AH6235 grade is formulated for tougher stainless steels and applications involving interruptions, which results in fewer tool changes and more stable cycle times. Because the plate is ISO 190616 formatted and uses a square, 90° geometry, process planners can expect predictable cutting behaviour across compatible holders, simplifying fixture selection and reducing setup variability. Better chip control and surface quality in stainless steel A double-sided chipbreaker tuned to the AH6235 grade promotes controlled chip formation with reduced tendency for long, stringy swarf typical of stainless machining. This improves surface finish and lowers secondary cleaning effort. In practice, the combination of chip geometry and the PVD layer reduces edge deterioration and maintains cutting performance under fluctuating feed or depth of cut, which is especially valuable for interrupted cuts and components that require a high-quality finish. Straightforward integration and handling for production use The insert’s cylindrical hole and standardised dimensions (square 19 mm size, 6.35 mm plate thickness, 1.6 mm corner radius) ensure mechanical compatibility with a wide range of external holders and boring bars. The 0° rake angle and 90° seat make clamping simple and repeatable, while the double-sided design extends the useful life of each plate. Clear specification of form, clearance angle, tolerance class, fastening and thickness helps maintenance teams plan inventory and replacement strategies with minimal downtime. Application-oriented reliability and economic benefit Selecting this grade for turning stainless steels and interrupted operations often translates into higher process reliability and longer effective edge life compared with general-purpose grades. The robust substrate and PVD-coated surface deliver consistent results, enabling predictable maintenance intervals and contributing to lower unit costs over time. For shops aiming to combine productivity with dependable component quality, this insert represents a balance of performance and economy. For application advice or to specify inserts for a particular stainless steel grade or interrupted-cut component, contact Metav Werkzeuge for tailored recommendations and swift supply. Technical data Article number: 6903395 Manufacturer SKU: TUN6903395 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts ISO designation: 190616 Insert form: square, 90° Plate size: 19 mm Plate thickness: 6.35 mm Corner radius: 1.6 mm Rake angle: 0° Hole style: with cylindrical hole Special features Coating: PVD-coated Grade: AH6235 Chipbreaker: double-sided Typical application: turning, interrupted cuts Suitable for: stainless steel machining System components: ISO insert, matching external holder or boring bar, backing/tension set, replacement screws FAQ What materials is this insert best suited for? The SNMG190616 AH6235 Tungaloy indexable insert is formulated for stainless steel and performs well in interrupted cuts and situations with increased chipping risk. How does the AH6235 grade improve process reliability? AH6235 combines a tough carbide substrate with a PVD coating, reducing edge chipping and extending usable life under variable cutting conditions, which enhances overall process stability. Can the insert be used on both internal and external turning operations? Yes, the ISO-compatible square form and standard hole style allow use in suitable external holders and compatible internal turning setups when the correct holder and geometry are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 AH8005 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH8005 grade and the double-sided chipbreaker for reliable, wear-resistant performance in demanding turning tasks; order directly via Metav Werkzeuge or consult the team for application advice. SNMG 190616 AH8005 Tungaloy indexable insert for turning — PVD-coated carbide, 1.6 mm corner radius The SNMG 190616 AH8005 is a square ISO indexable insert engineered for stable external and internal turning of heat-resistant alloys and hard materials, combining a PVD coating with a robust geometry for consistent process results PVD-coated carbide grade AH8005 1.6 mm corner radius for robust profiles Double-sided chipbreaker for consistent chips ISO SNMG190616, square 90° form Durable grade and coating for long tool life The AH8005 grade, realised as a PVD-coated carbide, provides increased wear resistance when machining heat-resistant alloys and hard materials. This specification reduces flank wear and prolongs service intervals, which in turn improves tool costing per component. The combination of coating and substrate is aimed at maintaining a stable cutting edge under the thermal and mechanical stresses typical of heavy-duty turning, so fewer interruptions for insert changes are required and overall machining efficiency is improved. Geometry designed to ensure process stability and repeatability The insert’s square 90° form and corner radius 1.6 mm support strong edge support and predictable part geometry in both external and internal turning operations. A 6.35 mm plate thickness and the ISO form factor contribute to secure clamping and reduced vibration when used with appropriate ISO holders. These geometric choices translate into stable cutting conditions, improved surface finish, and simplified set-up — especially beneficial in serial production where repeatability matters more than ever. Chip control and mounting features that aid productivity A double-sided chipbreaker helps to produce consistent chips across a range of cutting parameters, aiding evacuation and preventing re-cutting. The insert is supplied with a cylindrical hole, enabling reliable location and fastening in compatible holders. For workshop planning, the ISO designation indicates compatibility parameters (form, relief angle, tolerance class, size and thickness) that determine whether a specific holder is suitable, allowing straightforward integration into existing tooling systems. Practical application guidance and material scope Intended primarily for turning, this indexable insert suits operations on heat-resistant alloys and harder workpiece materials when a stable machining set-up is maintained. Selection of an appropriate chipbreaker and grade is essential for optimised performance; the AH8005 variety is tailored to deliver productive machining under higher temperatures and abrasive conditions. For tasks requiring different surface characteristics or softer materials, consider alternative grades or chipbreaker styles matched to the workpiece and machining strategy. Contact Metav Werkzeuge for availability and application advice on the SNMG 190616 AH8005 Tungaloy indexable insert — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6741685-Tungaloy Manufacturer SKU: TUN6741685 Manufacturer article number: 6741685 Model series: ISO turning indexable inserts Facts Insert designation: SNMG190616 Plate size: 19 mm Plate thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Form angle: 90° Design & features Material: carbide Coating: PVD Grade: AH8005 Shape: square (SNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is the SNMG 190616 AH8005 best suited for? The SNMG 190616 AH8005 insert from Tungaloy is formulated for machining heat-resistant alloys and harder materials, where a wear-resistant PVD-coated carbide delivers longer edge life. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker on the SNMG 190616 AH8005 promotes consistent chip formation and evacuation, which supports steady cutting forces and reduces the risk of re-cutting. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening system, size and plate thickness; the SNMG190616 follows ISO dimensions for straightforward pairing with matching ISO holders. Is the AH8005 grade suitable for high-temperature turning? Yes, the AH8005 PVD-coated carbide grade is specified for applications involving higher cutting temperatures, offering improved resistance to thermal wear during stable machining. What identifying numbers relate to this product for ordering? Use the article number 6741685-Tungaloy or manufacturer SKU TUN6741685 when specifying the SNMG 190616 AH8005 Tungaloy indexable insert for procurement Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD-coated AH8015 carbide for extended life, a 1.6 mm corner radius for robust cutting action and the ISO SNMG190616 form for reliable fit in standard turning toolholders; order directly via Metav Werkzeuge or consult the technical team for compatibility advice. SNMG 190616 AH8015 ISO turning insert — PVD-coated, 1.6 mm corner radius, Tungaloy The SNMG 190616 AH8015 is an ISO-standard indexable insert designed for general-purpose turning, especially suited to the machining of heat-resistant alloys and demanding materials. PVD-coated carbide grade AH8015 1.6 mm corner radius for strong cutting edges Double-sided chipbreaker for consistent chips ISO SNMG190616; 19 mm square; 6.35 mm thick Reliable performance for heat-resistant alloys and general turning This insert combines a PVD-coated top layer with a wear-resistant carbide substrate to deliver a favourable compromise between edge stability and abrasion resistance. The selected grade, AH8015, is intended as a first choice for the general machining of heat-resistant alloys; it reduces flank wear under variable cutting conditions and extends uninterrupted production runs. The result is predictable tool life and fewer indexings, which supports higher overall process efficiency. Designed for secure clamping and broad ISO compatibility The ISO SNMG190616 geometry ensures straightforward matching with standard square insert holders. The square form with a cylindrical hole and a 0° clearance angle requires that holder selection be based on form, clamp type, tolerance class, size and thickness to guarantee correct seating and repeatability. The insert’s 6.35 mm thickness and 90° nominal cutting angle provide rigidity for shoulder cuts and face turning, reducing vibration and improving dimensional stability in finished components. Stable chip control and productivity gains A double-sided chipbreaker supports consistent chip formation across a range of feeds and depths, helping to prevent entanglement and aiding evacuation from the cutting zone. The 1.6 mm corner radius offers a robust edge for interrupted cuts and shoulder operations, improving resistance to edge chipping. Together, these features contribute to fewer tool changes, shorter cycle times and a more predictable surface finish, which are decisive advantages for production environments aiming to raise throughput without compromising quality. Practical selection and handling guidance The insert is supplied as an indexable, square turning plate and is intended to be used with a matching outer holder or boring bar plus the appropriate shim, clamp set and replacement screw. As a PVD-coated cemented carbide grade, it benefits from standard handling precautions: avoid excessive mechanical shock, inspect the cutting edge for micro-chipping before use and replace the index when wear affects surface quality or dimensional accuracy. For optimal results, adapt the chipbreaker and grade selection to the specific workpiece material and rigidity of the machining setup. For reliable machining of heat-resistant alloys choose the Tungaloy AH8015 grade and contact Metav Werkzeuge for ordering or detailed compatibility checks — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder options and batch requirements Technical Data Article number: 6741686 Manufacturer SKU: TUN6741686 Model series: ISO turning inserts Facts Insert designation: SNMG190616 Corner radius: 1.6 mm Insert size: 19 mm (square) Thickness: 6.35 mm Clearance angle: 0° Cutting angle: 90° Special features Material: carbide (cemented) Coating and grade: PVD-coated, AH8015 Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) FAQ What materials is this insert suitable for? The SNMG 190616 AH8015 insert is optimised for heat-resistant alloys and general turning applications; the PVD-coated AH8015 grade balances wear resistance and edge stability for such materials. Is the insert compatible with standard SNMG holders? Compatibility depends on holder form, free angle, tolerance class, clamp type, size and thickness; the SNMG190616 geometry matches common ISO square holders when the correct clamping components are used. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius increases edge robustness, reducing the risk of chipping during interrupted cuts and improving stability when performing shoulders or heavier cuts. Does the insert have a chipbreaker and how does it behave? Yes, the insert features a double-sided chipbreaker designed to produce consistent chips and support efficient evacuation across a range of cutting conditions. How many cutting edges are available per insert? The SNMG form is double-sided and indexable; the number of usable edges corresponds to the specified geometry and the number of index positions provided by the insert design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T5105 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide grade for sustained wear resistance and a compact 19 mm square geometry that supports stable, high‑speed turning of cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG 190616 T5105 turning insert — Tungaloy SNMG 190616 T5105 is an ISO‑standard turning insert designed for high‑speed machining of cast iron under stable cutting conditions, offering a robust CVD coating and a square 19 mm form for versatile external and internal turning. CVD-coated cemented carbide for wear resistance 19 mm square geometry, 90° cutting angle Double-sided chipbreaker with 1.6 mm radius Product chemistry for longer tool life and consistent cuts The grade is a CVD‑coated carbide designated T5105, developed for high‑speed machining where wear resistance and predictable tool life are essential. The coating increases resistance to abrasive wear and thermal softening, which means fewer interruptions for tool changes during long runs. For cast iron applications the double‑sided chipbreaker supports controllable chip formation, improving surface finish and reducing the risk of built‑up edge. Overall, the material and coating combination reduces consumption of inserts and stabilises cycle times. Geometry and system compatibility that simplify integration The insert follows the ISO outline SNMG190616: a 19 mm square plate with a 6.35 mm thickness and a 90° approach angle, featuring a cylindrical hole for secure clamping. The 1.6 mm corner radius provides a balance between strength and edge definition, suitable for both medium stock removal and finishing passes under steady conditions. Compatibility with a toolholder depends on form, clearance angle, tolerance class, clamping method, size and thickness; selecting a matched external holder ensures repeatable positioning and reliable clamping force for consistent geometry transfer. Operational benefits: productivity, surface quality and predictable results By selecting this grade and geometry, shops achieve a favourable cost‑per‑part through longer edge life and fewer stoppages. The T5105 composition is optimised for stable conditions and high cutting speeds, which supports improved throughput without sacrificing surface quality. For fine finishing the controlled chip form and even wear behaviour help deliver reproducible surface integrity, while the robust edge geometry resists chipping when feeds and depths are maintained within recommended ranges. Practical handling, system setup and replacement strategy The plate is double‑sided, offering two usable cutting edges before rotation, and is supplied with a cylindrical‑hole configuration for standard clamping systems. When installing, ensure the holder pocket and clamp match the plate thickness and hole style to prevent displacement or vibration. For best results pair the insert with a holder suited to cast iron machining and choose the chipbreaker variant and cutting data according to workpiece stability. Routine inspection of the edge and monitoring of surface appearance will indicate the optimal exchange interval, keeping productivity high and rejects low. For application guidance or to obtain the SNMG 190616 T5105 insert from Tungaloy, contact Metav Werkzeuge for technical recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6853001 Manufacturer article number: 6853001 Manufacturer SKU: TUN6853001 SKU: 6853001-Tungaloy Brand: Tungaloy Model series: ISO turning inserts ISO designation: SNMG190616 Numbers / Core technical data Plate size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Rake / clearance angle: 0° Cutting angle: 90° Designs / Special features Material: carbide Coating: CVD Grade: T5105 Plate form: square Hole style: cylindrical hole Chipbreaker: double-sided Typical application: turning (external and internal) System components: insert, holder, clamp set, replacement screws FAQ What materials is this insert intended for? The SNMG 190616 T5105 insert by Tungaloy is optimised for machining cast iron at high cutting speeds and stable cutting conditions, delivering controlled chip formation and good wear resistance. How many cutting edges are available per insert? The plate is double‑sided, so the SNMG 190616 T5105 offers two usable cutting edges before rotation or replacement is required. What holder features are required for correct compatibility? Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; use a holder that matches the 19 mm square geometry, 6.35 mm thickness and cylindrical hole for secure clamping. Is the coating suitable for high‑speed finishing? Yes, the CVD coating on the T5105 grade is chosen for improved wear resistance at elevated cutting speeds, supporting productive finishing passes under stable conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T5115 Wendeplatten - Tungaloy
Achieve reliable, economical turning in cast-iron applications by combining a CVD-coated carbide T5115 grade with the robust SNMG190616 geometry; the result is extended edge life and stable chip formation thanks to the double-sided chipbreaker and a 1.6 mm nose radius. Order directly via Metav Werkzeuge or contact our consultants for tailored recommendations. SNMG190616 T5115 – Square ISO turning insert, CVD-coated carbide, 90° geometry by Tungaloy The SNMG190616 T5115 is an ISO-standard square indexable insert for external and internal turning that pairs a CVD-coated carbide substrate with a universal grade optimised for cast-iron machining CVD-coated carbide for high wear resistance Universal grade T5115 for cast-iron applications Double-sided chipbreaker for consistent chip control Square 90° geometry with 1.6 mm nose radius Longer tool life through predictable wear resistance The CVD-coated carbide composition of this indexable insert delivers a measurable increase in durability when machining cast iron. The T5115 grade combines wear resistance with cutting-edge stability, reducing unplanned tool changes and helping to maintain consistent component tolerances over longer production runs. For operations where repeatability and uptime matter, the coating chemistry promotes gradual, controlled wear rather than abrupt edge failure, which simplifies process planning and minimises scrap rates. Reliable chip control and neutral engagement for versatile turning A double-sided chipbreaker on the insert face ensures regular chip formation and evacuation during turning, which lowers the risk of built-up edge and improves surface finish. The insert’s 0° clearance angle provides a neutral engagement geometry that is broadly compatible with a variety of toolholders; compatibility is determined by form, relief angle, tolerance class, attachment, size and thickness. This combination supports steady cutting forces and predictable tool behaviour, making the insert suitable for varied turning tasks where consistent chip control and surface quality are required. System compatibility and practical dimensions for efficient workflows With a square form and 90° geometry, the insert supplies strong corner support and straightforward profile control in external and internal turning. Key dimensions—19 mm inscribed circle, 6.35 mm thickness and a 1.6 mm nose radius—offer a balance between edge strength and contour fidelity for finishing and light roughing of cast-iron components. As part of an ISO-compliant system the insert is designed to work with matching external holders or boring bars, plus shims/clamp sets and replacement screws to maintain clamping integrity and repeatability across tool changes. For reliable cast-iron turning with Tungaloy quality, contact Metav Werkzeuge to request SNMG190616 T5115 inserts or to obtain application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 6853002-Tungaloy Manufacturer SKU: TUN6853002 Manufacturer article number: 6853002 Designation: SNMG190616 T5115 Facts Radius: 1.6 mm Corner angle: 90° Inscribed circle: 19 mm Thickness: 6.35 mm Clearance angle: 0° Hole: with cylindrical hole Special features Material: Carbide Coating: CVD-coated Grade: T5115 Chipbreaker: double-sided Shape: square Application: turning System compatibility: ISO-standard insert, compatible with suitable holders and clamp/shim sets FAQ Which materials is this insert suitable for? The SNMG190616 T5115 from Tungaloy is a CVD-coated carbide grade developed primarily for cast-iron machining, where the T5115 composition balances wear resistance and edge integrity. How is compatibility with toolholders ensured? Compatibility for the SNMG190616 T5115 is determined by insert form, clearance angle, tolerance class, attachment method, size and thickness; use ISO-compatible holders and the appropriate clamp/shim set for secure mounting. What does the T5115 grade offer in practice? The T5115 grade on the Tungaloy insert provides a universal solution for cast iron, optimising the trade-off between abrasive wear resistance and cutting-edge stability for dependable turning performance. How does the chipbreaker influence machining results? The double-sided chipbreaker on the SNMG190616 promotes consistent chip formation and evacuation, improving surface quality and reducing the likelihood of built-up edge during turning operations. Is the insert suitable for both external and internal turning? Yes, the square 90° geometry and the dimensions of the SNMG190616 T5115 make it suitable for both external and internal turning tasks when used in the correct holder and clamping arrangement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T5125 Wendeplatten - Tungaloy
High-performance CVD-coated carbide in grade T5125 combines reliable chip control with robust wear resistance, especially for interrupted turning in cast iron; the square, double-sided ISO geometry with a 1.6 mm corner radius gives stable cutting behaviour and simple indexability. Order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility and application advice. SNMG190616 T5125 – indexable turning insert by Tungaloy The SNMG190616 T5125 indexable insert is a CVD-coated carbide cutting geometry designed for turning operations, optimised for interrupted cuts and less stable machining conditions in cast iron. CVD-coated carbide grade T5125 Optimised for interrupted cuts in cast iron Double-sided chipbreaker for versatility Square 19 mm insert with 1.6 mm radius ISO SNMG190616 format with cylindric hole Proven cutting performance for interrupted turning The CVD-coated carbide substrate in grade T5125 delivers a balance between toughness and wear resistance that is particularly effective in interrupted cuts. This composition reduces the risk of chipping under varying engagement conditions and extends effective edge life, which supports consistent cycle times and reduced tool-change frequency. The result is a measurable improvement in process stability when machining cast iron components. Geometry and compatibility that simplify tooling choices The insert follows the ISO SNMG190616 geometry with a 90° included angle and a 0° clearance angle, available as a square 19 mm format with 6.35 mm thickness and a cylindrical hole for secure fastening. Compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. This standardised interface allows straightforward selection of matched external or internal turning holders and reduces setup complexity. Consistent chip control and surface finish A double-sided chipbreaker integrated in the insert design promotes repeatable chip formation and evacuation during both roughing and finishing passes. In combination with the T5125 coating, the insert helps avoid unstable chip shapes and built-up edge on grey cast iron, improving surface integrity and lowering the need for rework. Where surface quality is critical, pair the insert with a holder that supplies sufficient rigidity to exploit the insert’s chip-control geometry. System mindset: installation and spare parts The indexable system comprises the insert, a compatible external holder or boring bar, an underlay or clamp set and replacement screws. Correct torque and seating on the shim or clamping set are essential to preserve tolerance and repeatability; properly mounted inserts maintain cutting geometry and help prevent premature edge failure. The standardised hole and form permit rapid replacement and rotation of the cutting edge, contributing to reduced downtime. Economic efficiency and predictable tool life The combination of a robust carbide substrate and CVD coating yields a reliable cutting edge that withstands the impact loads common in interrupted turning. This translates into lower tooling consumption per manufactured part and fewer unexpected stops for tool changes, supporting a more predictable production flow. For small-batch or flexible manufacturing, the insert’s double-sided configuration doubles available cutting edges and improves cost efficiency. Application guidance and selection criteria Best suited for external and internal turning of cast iron where interruptions or reduced fixture stability are anticipated, the insert performs well when paired with a matched chipbreaker and stable clamping. Selection should consider the workpiece material, depth of cut and machine rigidity; choosing the appropriate holder and clamp completes the system and unlocks the insert’s potential for reliable machining results. For application-specific advice on the Tungaloy T5125 carbide grade or to confirm compatibility with a particular holder, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert guidance. Technical data Article number: 6853003 Manufacturer SKU: TUN6853003 SKU: 6853003-Tungaloy Numbers / Core technical data Insert designation: SNMG190616 Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 90° Clearance angle: 0° Hole: cylindric hole Shape: square Special features / Versions Material: carbide Coating: CVD-coated Grade: T5125 Chipbreaker: double-sided Application: turning (external & internal) Suitability: interrupted cuts, cast iron System components: insert, holder, shim/clamp set, replacement screws FAQ What materials is this insert intended for? This indexable turning insert is primarily intended for cast iron machining and is optimised for interrupted cuts and less stable turning conditions using the T5125 grade. What does the T5125 designation indicate? T5125 denotes a CVD-coated carbide grade designed for enhanced toughness and reliable performance in interrupted cutting situations; the coating supports wear resistance while the substrate absorbs impact loads. Is the SNMG190616 insert reversible or single-use per edge? The SNMG190616 format is double-sided with two usable cutting edges per face, allowing multiple indexing operations before disposal of the insert. Which holders are compatible with this insert geometry? Compatibility follows the ISO SNMG190616 standard; suitability is defined by form, relief/freedom angle, tolerance class, fastening method, size and thickness of the holder and clamping system. What are the key dimensions and mounting details? Key dimensions are: 19 mm size, 6.35 mm thickness, 1.6 mm corner radius, 90° included angle and a cylindric hole for fastening (SKU 6853003-Tungaloy). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T515 Wendeplatten - Tungaloy
Combining CVD-coated carbide performance with a 1.6 mm corner radius and ISO compatibility, this insert delivers stable chip control and consistent edge life for economical cast-iron turning. Order the SNMG190616 T515 via Metav Werkzeuge or consult our application specialists for grade and chipbreaker selection. SNMG190616 T515 SNMG – ISO turning insert for Drehen by Tungaloy The SNMG190616 T515 is an ISO-standardised square turning insert for external and internal turning, designed for economical machining of cast iron with a 90° approach angle and a 1.6 mm corner radius. CVD-coated carbide for economical cast-iron machining ISO-standard SNMG insert, 90° approach angle Double-sided chipbreaker for quick indexability Square 19 mm size, 6.35 mm thickness Stable, economical cutting for cast-iron components The CVD-coated carbide grade T515 provides a balance between cost-effectiveness and reliable edge life, making it suitable where consistent production rates are required. The coating supports stable chip formation, reducing built-up edge and improving component finish; this is particularly beneficial when turning grey or nodular cast iron. By combining a durable substrate with an engineered surface layer, the insert reduces the frequency of tool changes and keeps cycle times predictable on series production. Geometry and system compatibility that reduce setup time With a 90° approach angle, square format and a 1.6 mm corner radius, the insert offers both rigidity and versatility for facing and general turning tasks. The double-sided chipbreaker reduces indexing time and lowers tooling cost per cutting edge. Compatibility with toolholders depends on form, clearance angle, tolerance class, fixing method, size and thickness, so using ISO-standard holders and the correct clamp set ensures accurate seating and repeatability in the toolpost or boring bar. Process security and surface quality thanks to coherent design The combination of CVD-coated surface and the chipbreaker geometry promotes secure chip evacuation and a stable cutting edge, which contributes to improved surface finish and fewer rejects. For interrupted cuts or unstable setups, selecting the appropriate chipbreaker and ensuring sufficient workpiece rigidity will extend tool life. The grade is optimised for cast-iron turning where a balance of productivity and edge stability matters most. Practical handling and spare-part considerations Dimensioned as a square insert with a 19 mm side and 6.35 mm thickness, the item is delivered in the SNMG190616 form with a cylindrical hole for positive clamping. The system concept typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws; keeping spare screws and shims on hand reduces machine downtime and simplifies changeover in production. For tailored application advice or to confirm stock, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SNMG190616 T515 and suitable holders. Technical data Article number: 6747816 Manufacturer SKU: TUN6747816 Catalogue SKU: 6747816-Tungaloy Model series: ISO turning inserts Designation: SNMG190616 Manufacturer: Tungaloy Facts Corner radius: 1.6 mm Insert size: 19 mm Thickness: 6.35 mm Approach angle: 90° Clearance angle: 0° Special features CVD-coated carbide grade T515 Double-sided chipbreaker Square insert with cylindrical hole ISO SNMG190616 form Intended for turning of cast iron Compatibility defined by holder form, clearance, tolerance class, fixing, size and thickness FAQ Which materials is this insert best suited for? The SNMG190616 T515 by Tungaloy is formulated primarily for economical machining of cast iron; the CVD-coated carbide and chipbreaker geometry favour stable operation in grey and nodular cast irons. Is the insert reversible and indexable? Yes, the SNMG190616 is double-sided and indexable; the chipbreaker on both faces allows rapid indexing to a fresh cutting edge, improving cost-efficiency per edge. How do the geometry and coating affect surface finish? The combination of the CVD-coated substrate and the chipbreaker supports controlled chip flow and a stable cutting edge, which together help achieve consistent surface quality in routine turning operations. What dimensions and mounting features should be checked before ordering? Key dimensions are a 19 mm side, 6.35 mm thickness and a 1.6 mm corner radius; the insert has a cylindrical hole and requires a matching ISO holder with the correct clearance and tolerance class for secure mounting. Can the SNMG190616 T515 be used for interrupted cuts or unstable setups? It can be used, but selection of the chipbreaker and ensuring workpiece and toolholder stability are important; the grade is chosen for economical cast-iron machining and performs best in stable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T9205 Wendeplatten - Tungaloy
Take advantage of the T9205 CVD-coated carbide grade and the 1.6 mm corner radius for stable, productive turning of steel under higher cutting speeds; order the SNMG190616 T9205 insert directly via Metav Werkzeuge or ask our consultants for tailored advice. SNMG 190616 T9205 turning insert (ISO) by Tungaloy The SNMG190616 T9205 is an ISO-standard indexable turning insert engineered for productive external and internal turning of steel in stable set-ups. CVD-coated carbide for demanding steel turning ISO SNMG190616, square 19 mm size 1.6 mm corner radius, 6.35 mm thickness Double-sided chipbreaker, cylindrical hole Consistent productivity for high‑speed steel turning The CVD-coated carbide grade T9205 delivers a combination of wear resistance and cutting-edge stability that translates directly into higher productivity on the shop floor. As a grade optimised for steel, the coating supports productive turning at elevated cutting speeds while maintaining a predictable wear curve; this reduces unplanned tool changes and helps keep cycle times low. Emphasis on measurable performance ensures operators can plan feeds and speeds with confidence rather than relying on guesswork. Easy integration with ISO toolholders and secure clamping Designed to the ISO standard for SNMG inserts, this component ensures reliable compatibility with matching external holders and boring bars when the form, clearance angle, tolerance class, fastening method, size and thickness are observed. The ISO conformity simplifies inventory management and holder selection across multiple machines. Clear reference to dimensional standards reduces set-up time and supports repeatable clamping, which is essential for consistent part quality in batch production. Robust geometry for reliable chip control and edge life The insert’s square form (19 mm) combined with 6.35 mm thickness, a 1.6 mm corner radius and a 0° rake angle provides mechanical strength where it matters, reducing the risk of chipping under interrupted cuts. The double-sided chipbreaker promotes predictable chip formation and evacuation; the cylindrical hole supports secure fastening and stable seat location. These features together improve dimensional stability of the workpiece and extend the usable life of individual cutting edges, lowering tooling consumption per part. Practical selection advice for varied turning tasks Select the chipbreaker style and the T9205 grade when machining steel in steady, well-supported conditions and when prioritising a balance of tool life and surface finish. For unstable set-ups or thin-walled parts, consider a smaller corner radius or different chip control strategy to avoid chatter. The insert’s design aims to deliver process reliability and repeatable surface quality, making it a sound choice for production runs where predictable results and uptime are priorities. For tailored recommendations or to secure SNMG190616 T9205 inserts from Tungaloy, contact Metav Werkzeuge for specification support and fast delivery — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6785772 Manufacturer SKU: TUN6785772 Model series: ISO-Drehwendeschneidplatten Data Designation: SNMG190616 Grade: T9205 Material: Carbide Corner radius: 1.6 mm Thickness: 6.35 mm Size: 19 mm Lead angle: 90° Rake angle: 0° Special features Form: square Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: Turning Coating: CVD-coated carbide FAQ What materials is this insert intended for? The SNMG190616 T9205 insert is specified for productive turning of steel; the T9205 CVD-coated carbide grade is optimised for wear resistance in such applications. How does ISO conformity help in tool selection? ISO-standard designation SNMG190616 ensures the insert fits compatible external holders and boring bars when form, clearance, tolerance, fastening, size and thickness match the toolholder specifications. What advantages does the double-sided chipbreaker provide? A double-sided chipbreaker offers predictable chip formation and the ability to index to a fresh cutting geometry, supporting consistent surface finish and controlled chip flow. Which geometric details improve edge stability? The combination of 6.35 mm thickness, 1.6 mm corner radius and 0° rake angle provides mechanical robustness and reduces susceptibility to edge chipping under stable cutting conditions. Is the insert suitable for internal turning as well as external turning? Yes — the insert’s geometry and chip control characteristics make it appropriate for both external and internal turning operations when the chosen holder and operation parameters provide adequate support. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T9215 Wendeplatten - Tungaloy
Combining CVD-coated T9215 grade with a robust double-sided chipbreaker yields high productivity and reliable tool life for medium-steel turning; order the SNMG190616 insert via Metav Werkzeuge or consult our specialists for optimised cutting parameters. SNMG 190616 T9215 turning insert — Tungaloy, CVD-coated carbide, 1.6 mm radius The SNMG190616 T9215 is a square ISO indexable insert designed for medium-steel turning, offering a balanced mix of wear resistance and fracture toughness for continuous to slightly interrupted cuts. CVD-coated T9215 grade for medium steel Double-sided chipbreaker for stable cutting Square 19 mm insert with 1.6 mm radius ISO-compatible geometry and 0° relief Boosts productivity through high wear resistance The CVD-coated cemented carbide grade T9215 is formulated for productive machining of medium steels. Its coating increases wear resistance, enabling longer cutting times between indexings and promoting consistent component quality. For continuous or lightly interrupted cuts the combination of coating and substrate reduces flank wear and maintains dimensional stability, which directly impacts cycle times and overall machining efficiency. Secure fit and predictable assembly for industrial environments As an ISO-format indexable insert, the geometry and tolerance class determine compatibility with the holder. The square 19 mm form factor and 6.35 mm thickness ensure a secure seat in standard external holders or boring bars. The 0° relief and cylindrical locating hole provide repeatable positioning and simplified clamping; this reduces setup variation and supports stable process control on production lines. Reliability in mixed shop-floor conditions The insert’s construction gives a balance of fracture toughness and hardness appropriate for a wide range of turning tasks. The double-sided chipbreaker is designed to control chip formation and evacuation, improving surface finish and minimising recutting in normal cutting conditions. The 1.6 mm corner radius contributes to edge strength and helps produce consistent corner radii on finished parts, reducing the need for secondary operations. Practical guidance for machining and tool selection Select the chipbreaker and grade according to workpiece stability and machining type: for heavy interrupted cuts prefer a more robust mounting and conservative feeds; for finish passes reduce feed and exploit the insert’s coating for extended tool life. The insert suits external and internal turning operations when paired with appropriately rated holders and clamping sets. For specific cutting data and feed/speed recommendations, rely on the supplier’s technical data to adapt parameters to machine rigidity and part geometry. For high-productivity medium-steel turning, choose the Tungaloy SNMG190616 T9215 inserts from Metav Werkzeuge; contact our technical team at Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for tailored cutting data Technical data Article number: 6773868 Manufacturer SKU: TUN6773868 Model series: ISO indexable turning inserts Product designation: SNMG190616 Application: Turning Numbers / Core technical data Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Insert angle: 90° Manufacturer article number: 6773868 Special features Shape: square Hole: cylindrical locating hole Grade/coating: T9215 CVD-coated cemented carbide Chipbreaker: double-sided Intended use: medium-steel machining Compatibility determined by form, relief, tolerance, fixing, size and thickness FAQ What materials is this insert best suited for? The SNMG190616 T9215 insert is optimised for medium-steel machining; the T9215 grade combines wear resistance and toughness for productive turning of steel. How many usable edges does the insert provide? The insert is double-sided with four indexable cutting corners per side typical of square ISO inserts, giving multiple usable edges before replacement. What is the purpose of the cylindrical hole in the insert? The cylindrical locating hole ensures repeatable positioning and secure clamping in compatible holders, which aids process stability during turning operations. Can this insert be used for internal as well as external turning? Yes; when paired with suitable boring bars or internal holders the insert is suitable for both external and internal turning operations. Where can one get compatible holders or clamping sets? Compatible holders are selected according to ISO geometry, relief angle, and thickness; Metav Werkzeuge can advise on matching holders and necessary clamping components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T9215 Wendeplatten - Tungaloy
Combine high wear resistance and reliable fracture toughness with a robust 90° square geometry and a 1.6 mm nose radius for stable, productive turning; order the insert directly via Metav Werkzeuge or request application advice from our consultants. SNMG 190616 T9215 turning insert (SNMG190616) by Tungaloy — 90° square, 1.6 mm radius The SNMG190616 T9215 is a CVD-coated carbide indexable insert designed for medium steel turning applications, offering a balance of wear resistance and breakage control in continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 90° square geometry for shoulder turning 1.6 mm nose radius for robust profiles Double-sided chipbreaker with cylindrical hole Consistent performance for mid-range steel turning The CVD-coated T9215 grade combines elevated wear resistance with controlled fracture toughness, making it suited to sustained production where consistent tool life is required. Designed primarily for medium steels, the insert handles continuous and mildly interrupted cuts while maintaining dimensional stability. The CVD layer improves resistance to abrasive wear and thermal degradation, which in turn reduces downtime for insert changes and maintains process reliability. This results in a predictable tool life and steadier component quality under typical turning conditions. Geometry and system compatibility that simplify setup The 90° square geometry and 1.6 mm nose radius give a favourable compromise between cutting-edge strength and profile accuracy for shoulder and external profiles. The plate is double-sided, reducing stock variance and cutting cost per edge, while the cylindrical hole and 6.35 mm plate thickness ensure secure clamping in compatible holders. Compatibility with a chosen holder depends on form, clearance angle, tolerance class, fixing method, size and thickness; the ISO-based system design eases selection of matching outer holders, boring bars, shims/clamps and replacement screws for a complete tooling set-up. Productivity, chip control and practical benefits in the workshop A dedicated double-sided chipbreaker supports stable chip formation and evacuation, enabling higher material removal rates with fewer interruptions. The carbide substrate and coating strategy support faster cutting parameters where process security is required, translating to improved throughput and reduced rework. As part of an ISO insert system, the item integrates into standard toolholders and clamping kits, simplifying inventory and replacement procedures. For additional cutting data, holder recommendations or process optimisation, further technical information is available on request from Metav Werkzeuge. Contact Metav Werkzeuge for tailored advice on holder compatibility and cutting parameters for this Tungaloy turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for precise application guidance Technical data Article number: 6773862 SKU: 6773862-Tungaloy Manufacturer SKU: TUN6773862 Article name: SNMG190616 T9215 Tungaloy indexable insert Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Nose radius: 1.6 mm Included angle: 90° Plate thickness: 6.35 mm Plate size: 19 mm Clearance angle: 0° Design and special features Material: carbide Coating/type: CVD-coated carbide Grade/sort: T9215 Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Application: turning ISO designation: SNMG190616 FAQ What materials is this insert intended for? The SNMG190616 T9215 insert is specified for medium steel turning; the CVD-coated carbide grade T9215 balances wear resistance and fracture toughness for productive machining of such steels. How does the 1.6 mm nose radius affect machining? A 1.6 mm nose radius increases edge strength and reduces risk of chipping on the SNMG190616 insert, providing more robust profiles and longer edge life compared with finer radii. Is this insert compatible with standard ISO SNMG holders? Yes, the insert follows the ISO SNMG190616 designation; compatibility with a specific holder is determined by form, clearance angle, tolerance class, fixing method, size and thickness. Can the insert be used for interrupted cuts? The T9215 grade is suitable for continuous to slightly interrupted cutting; its fracture resistance helps manage light interruptions without rapid edge failure. What are the main advantages of the double-sided chipbreaker? The double-sided chipbreaker on this square insert provides two usable edges per side, supports stable chip control and reduces inventory by offering reversible cutting edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide and a 90° square geometry with 1.6 mm corner radius for reliable turning performance and stable chip control; order the insert directly via Metav Werkzeuge or request specialist advice from their consultants. SNMG 190616 T9215 indexable turning insert by Tungaloy — CVD‑coated carbide, 90° square SNMG190616 T9215 is an ISO‑standard indexable insert designed for external and internal turning in medium steel applications. CVD-coated carbide for high wear resistance Suitable for medium steel and continuous cuts 90° square geometry with 1.6 mm corner radius 6.35 mm plate thickness; cylindrical hole, double-sided Consistent machining performance for medium steel components The CVD‑coated carbide composition of this indexable insert is optimised for medium steel, delivering a balance of wear resistance and breakage resistance that suits continuous to lightly interrupted cuts. Because the coating and substrate combination maintain edge stability under production loads, the insert supports higher productivity and longer tool life compared with uncoated grades. Compatibility with established ISO holders ensures predictable clamping and repeatable results in serial turning operations. Geometry and dimensions that reduce set‑up time and improve control A 90° square plate form with a 1.6 mm corner radius and 6.35 mm thickness provides a robust cutting edge that resists chipping while allowing straightforward indexing and re‑use of cutting corners. The cylindrical hole and standard tolerance classes make fixture matching simple; form, relief angle and size determine the correct holder choice. Clear dimensional standards reduce the time spent on trial set‑ups and help maintain consistent component tolerances across batches. Tailored chip control for dependable surface finish The insert features a double‑sided chipbreaker design adapted to turning tasks in steel; this promotes controlled chip formation and evacuation, which in turn supports a stable machining process and improved surface quality. For applications where surface finish and dimensional accuracy are priorities, the combination of chip geometry and the T9215 grade’s toughness reduces the risk of edge failure and helps achieve repeatable results across shifts. System approach and material handling advantages Delivered as part of a system consisting of ISO inserts, matching outer holders or boring bars, and fastening hardware, the insert integrates into common turning tool assemblies with minimal adaptation. The ISO series specification clarifies which holders and clamping kits are appropriate, avoiding compatibility errors. Selecting the T9215 grade is recommended when a blend of productivity and reliable tool life is required for medium steel machining tasks. Contact Metav Werkzeuge for a technical consultation on integrating the Tungaloy SNMG190616 T9215 insert into production workflows; Metav Werkzeuge’s specialists can advise on holder compatibility and cutting data to maximise throughput. Technical data Article number: 6772302 SKU (manufacturer): TUN6772302 SKU (shop): 6772302-Tungaloy Label: SNMG190616 T9215 Tungaloy-Wendeplatte Manufacturer article number: 6772302 Facts Corner radius: 1.6 mm Plate thickness: 6.35 mm Plate size: 19 mm Relief angle: 0° Geometry angle: 90° Special features Material: carbide Coating: CVD-coated Grade: T9215 Plate form: square, double-sided Hole: with cylindrical hole Chipbreaker: double-sided Series: ISO indexable turning inserts Typical application: external and internal turning; medium steel; continuous to light interrupted cuts FAQ What materials is this insert suitable for? The SNMG190616 T9215 insert is formulated for medium steel machining and performs well in continuous to slightly interrupted turning operations. How does the T9215 grade affect tool life? The T9215 CVD‑coated carbide grade balances wear resistance and toughness, increasing tool life under standard production conditions while maintaining consistent cutting performance. Is the insert compatible with standard ISO holders? Yes — the SNMG190616 adheres to ISO dimensions and uses a cylindrical hole and standard tolerance classes to ensure compatibility with matching ISO external holders and boring bars. What cutting tasks benefit most from this insert? The insert is recommended for external and internal turning where steady chip control and a robust edge are required, particularly in medium steel components manufactured in series. Can the insert be indexed to extend usage? The square, double‑sided design allows indexing of unused corners, effectively extending the number of available cutting edges per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T9225 Wendeplatten - Tungaloy
Robust cutting performance and consistent chip control are delivered by the T9225 CVD-coated carbide and the ISO SNMG190616 geometry; compatibility with ISO holders is ensured by the standardised form, 0° clearance angle and a 1.6 mm corner radius. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG190616 T9225 turning insert by Tungaloy — CVD-coated carbide, 0° clearance The SNMG190616 Tungaloy insert is an ISO-standard indexable turning insert intended for medium to heavy steel turning, combining a robust T9225 grade with a double-sided chipbreaker for stable metal removal. ISO SNMG190616 geometry, square insert CVD-coated carbide grade T9225 for steel 0° clearance angle for axial stability 1.6 mm corner radius for increased edge strength High-performance carbide grade for demanding steel turning The T9225 grade is a CVD-coated carbide designed as a robust universal grade for medium to heavy steel turning where variable engagement or lightly interrupted cuts require added toughness. The coating enhances wear resistance and heat management, while the substrate supports stable edge life; this combination reduces flank wear and helps maintain cutting parameters over longer intervals, improving overall process economy. The result is fewer indexings and more consistent component tolerance in serial production. ISO geometry and holder compatibility reduce setup uncertainty Using an ISO-standard SNMG190616 form means straightforward compatibility with most ISO holders; the insert’s square shape and defined dimensions (19 mm size, 6.35 mm thickness) allow predictable seating and clamping. The 0° clearance angle increases axial stability in facing and heavy axial cuts, while the cylindrical mounting hole ensures reliable fastening. These geometric features minimise set-up time and reduce the need for bespoke fixturing, supporting reproducible machining across shifts and machines. Controlled chip formation and cutting reliability The double-sided chipbreaker is engineered to produce short, consistent chips in steel applications, lowering the risk of entanglement and protecting the workpiece surface. Combined with the 1.6 mm corner radius, the insert tolerates variations in cutting depth and promotes a robust cutting edge that resists chipping under interrupted cuts. This leads to improved surface finish and fewer scrap parts, offering a clear operational advantage for workshops focused on throughput and quality. Practical integration, handling and economy of use As an indexable insert with two usable cutting edges per side, the SNMG format delivers cost-effective edge life: reversed indexing restores a fresh cutting geometry without tool regrinding. The CVD-coated carbide balance between toughness and wear resistance makes the grade suitable for a wide range of steels, reducing tool assortment complexity. Spare screws, clamping pads and compatible holders complete a simple system architecture that supports fast insert changes and limited machine downtime. For tailored application guidance or to procure genuine Tungaloy SNMG190616 T9225 inserts, contact Metav Werkzeuge — Metav Werkzeuge GmbH is available for technical consultation and order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6780738 SKU: 6780738-Tungaloy Manufacturer SKU: TUN6780738 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: T9225 Numbers / Core technical data Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Included hole: with hole (cylindrical) Designs / Special features Insert designation: SNMG190616 Insert shape: square Chipbreaker: double-sided Coating type: CVD-coated carbide Application: turning Hole style: cylindrical hole Compatible with ISO holders FAQ What materials is this insert suited for? The SNMG190616 T9225 insert is formulated for steel turning; the T9225 CVD-coated carbide provides toughness and wear resistance suitable for medium to heavy steel machining. How does the 0° clearance angle affect machining? A 0° clearance angle increases axial support and stability during heavy cuts; the SNMG190616 geometry helps maintain consistent cutting forces and dimensional control in facing and turning operations. Is the insert reversible and how many cutting edges are available? The square SNMG form is double-sided with a chipbreaker on both faces, allowing multiple indexings per insert to maximise usable edge life before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T9225 Wendeplatten - Tungaloy
Benefit from the combination of an ISO-standard geometry, a CVD-coated carbide grade engineered for toughness and a 1.6 mm corner radius that supports robust engagement in medium-to-heavy steel turning; order the insert directly from Metav Werkzeuge or consult our specialists for fitting and grade selection. SNMG 190616 T9225 indexable turning insert (ISO SNMG190616) by Tungaloy — designed for medium-to-heavy turning The SNMG190616 T9225 is an ISO-standard indexable turning insert intended for turning operations where a balance of toughness and wear resistance is required; the square format and central hole simplify secure mounting in a range of ISO-compatible holders. SNMG190616 ISO geometry, square insert CVD-coated carbide grade T9225 1.6 mm corner radius for sturdy engagement Double-sided chipbreaker, central cylindrical hole 6.35 mm plate thickness for stable clamping Reliable performance for medium-to-heavy steel turning The SNMG190616 geometry, combined with the CVD-coated carbide composition of grade T9225, delivers a dependable cutting edge under varying engagement conditions. The coating enhances wear resistance, while the substrate maintains enough toughness to tolerate slightly interrupted cuts and fluctuations in cutting forces. For applications in medium-to-heavy steel turning, this balance reduces unexpected tool changeovers and supports longer, predictable cutting lives, which in turn helps to stabilise production cycles and reduce downtime. Geometry and cutting-edge design that reduce rework A 1.6 mm corner radius and the square 90° configuration give a robust contact area that resists edge chipping during heavy engagement. The insert’s double-sided chipbreaker is engineered for consistent chip formation across typical turning depths, promoting controlled chip evacuation and better surface finish. The geometry suits external and internal turning operations and is particularly effective where repeatable dimensional control and reduced secondary machining are priorities. Secure mounting and compatibility with ISO systems The insert is supplied in the ISO SNMG190616 format with a central cylindrical hole, enabling secure fixation in standard external holders or boring bars. The 6.35 mm thickness and the defined tolerance class make clamping reliable under higher cutting forces; compatibility is determined by form, free angle, tolerance class, fastening method, size and thickness. Specifying the matching holder and clamping accessories ensures stable clamping and repeatable positioning, which is essential for high-precision or high-volume turning tasks. Operational benefits: efficiency and predictable outcomes Using an insert of this construction reduces the need for frequent edge changes and supports continuous production where throughput matters. Improved chip control and the balanced wear behaviour of grade T9225 contribute to consistent chip control and surface integrity, so parts are more likely to meet quality tolerances first-time. The combination of robust edge geometry and wear-resistant coating directly translates into higher overall productivity and lower per-part machining cost in many workshop environments. For tailored recommendations and assistance with selecting the correct holder or grade for specific steel turning tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and ordering support. Technical Data Article number: 6780690 SKU: 6780690-Tungaloy Manufacturer SKU: TUN6780690 Manufacturer item no.: 6780690 Model series: ISO-Drehwendeschneidplatten ISO designation: SNMG190616 Facts Insert size: 19 mm Plate thickness: 6.35 mm Corner radius: 1.6 mm Included angle: 90° Free/rake angle: 0° Hole: with hole (cylindrical) Chipbreaker: double-sided Materials & Special Features Material: carbide (hardmetal) Coating/grade: T9225 (CVD-coated carbide) Plate shape: square Application: turning (external and internal) Compatibility: ISO-standard holders; check form, free angle, tolerance class, fastening, size and thickness for fit FAQ What materials is this insert best suited for? The SNMG190616 T9225 insert is designed primarily for medium-to-heavy steel turning; the CVD-coated T9225 grade offers a robust combination of wear resistance and toughness suited to steel applications. Can this insert be used for interrupted cuts? Yes, the carbide substrate and coating combination in the T9225 grade provides additional toughness that tolerates slightly interrupted cuts better than more wear-focused grades. How is the insert secured to the holder? The insert uses a central cylindrical hole and a square format; secure clamping depends on matching the holder to the SNMG190616 form, thickness (6.35 mm), free angle (0°) and tolerance class. Does the chipbreaker suit fine finishing or heavy roughing? The double-sided chipbreaker offers consistent chip formation across a range of cutting conditions; it supports both heavy engagement where controlled chip evacuation is required and finishing passes that demand predictable chip flow. What are the dimensional identifiers to check for compatibility? Key identifiers are the ISO designation SNMG190616, insert size (19 mm), plate thickness (6.35 mm), corner radius (1.6 mm) and the 90° included angle; verify these against the holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, ISO compatibility and a 1.6 mm corner radius for consistent medium to heavy turning results. Order the SNMG190616 T9225 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG190616 T9225 — indexable turning insert by Tungaloy for medium to heavy steel turning The SNMG190616 T9225 is an ISO‑standard indexable insert designed for external and internal turning in variable steel‑machining conditions, offering a robust CVD‑coated carbide grade for enhanced toughness and repeatable performance CVD-coated carbide for heavy steel machining ISO‑standard form for wide holder compatibility 1.6 mm corner radius for versatile cutting Double‑sided chipbreaker for stable swarf control Increased productivity for medium to heavy turning operations The CVD‑coated carbide composition and the T9225 grade combine to deliver a balance of toughness and wear resistance that suits interrupted cuts and varying engagement conditions. The ISO form guarantees compatibility with common external holders and boring bars, which simplifies tool inventory and reduces changeover time. The relatively large corner radius (1.6 mm) supports stronger cutting edges and improved tool life in roughing passes, while the double‑sided chipbreaker helps maintain stable chip formation, reducing clogging and machine downtime. This paragraph focuses on measurable gains: fewer insert changes, steadier cycle times and a predictable process window for steel turning. Secure clamping and dimensional clarity for reliable handling With a 19 mm seat size, 6.35 mm thickness and a central cylindrical hole, the insert meets ISO tolerances that ensure secure clamping and repeatable positioning in the toolholder. The 90° insert geometry provides a neutral approach angle beneficial for general turning tasks, producing even contact forces and less tendency to deflect. The 0° relief angle suits a broad range of holder designs while preserving edge engagement characteristics. Clear dimensional data and standardised form reduce setup ambiguity and support stable machining results across different machines and operators. Resilience under variable cutting conditions and straightforward selection The T9225 carbide grade is formulated as a universal, tough option for mid to heavy steel machining when changing cut conditions or slight interruptions demand higher toughness. The CVD coating offers improved wear resistance at elevated temperatures, extending edge life on longer passes. For planning, choose chipbreaker and grade combinations matched to material and stiffness: this insert’s robust design allows conservative programming that still delivers high metal removal. The technical clarity of the specification helps process engineers and shopfloor staff select appropriate cutting parameters and holder systems with confidence. Contact Metav Werkzeuge today for application advice on Tungaloy cutting tools and to confirm the optimal insert and holder combination for specific turning tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780821 Manufacturer SKU: TUN6780821 SKU: 6780821-Tungaloy Model series: ISO‑Drehwendeschneidplatten Application: Turning ISO designation: 190616 Facts Corner radius: 1.6 mm Insert size: 19 mm Thickness: 6.35 mm Relief angle: 0° Geometry angle: 90° Hole: with hole (cylindrical) Chipbreaker: double‑sided Special features Material: carbide (Hartmetall) Coating: CVD‑coated Grade: T9225 Plate form: square Two usable cutting edges per side, reversible insert ISO‑standardised insert for wide holder compatibility FAQ What materials is this insert suitable for? The Tungaloy SNMG190616 T9225 insert is specified for medium to heavy steel machining and performs well under varying engagement conditions thanks to the tough T9225 grade. How does the CVD coating benefit cutting performance? The CVD coating on the carbide substrate improves wear resistance at higher cutting temperatures, extending edge life for longer turning passes with the SNMG190616 insert. Is this insert compatible with standard ISO holders? Yes, the SNMG190616 follows ISO geometry and sizing conventions, which ensures compatibility with commonly used external holders and boring bars designed for SNMG inserts. What cutting edge strength does the 1.6 mm radius provide? A 1.6 mm corner radius increases edge strength and thermal capacity compared with finer radii, making the insert suitable for roughing and interrupted cuts where robustness is needed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com