SNMG 190616 T9225 Wendeplatten - Tungaloy
Reliable CVD-coated carbide and the robust T9225 grade deliver consistent performance in medium to heavy turning; the square, double-sided design with a central hole ensures economical indexing and secure clamping. Order the SNMG190616 T9225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG190616 T9225 SNMG turning insert for turning – Tungaloy The SNMG190616 T9225 is an ISO‑standard square, double‑sided indexable insert for external and internal turning, designed for medium to heavy steel machining. CVD-coated carbide for durable performance Universally tough T9225 grade for steel machining Double-sided square insert with 1.6 mm radius ISO-standard SNMG190616 with central hole High-performance grade for demanding steel turning The SNMG190616 T9225 combines a CVD-coated carbide substrate with a T9225 universal grade formulated for the mid-to-heavy range of steel machining. This composition offers an effective balance between hardness and toughness, meaning the insert resists abrasive wear while tolerating light interruptions in the cut. The result is steady tool life and predictable component quality, supporting stable machining cycles and fewer unscheduled tool changes. Secure clamping and system compatibility As an ISO-standard square insert with a central hole and cylindrical bore, this plate integrates readily into standard external holders and boring bars. Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening and the plate’s size and thickness, all of which are standardised for SNMG‑type inserts. The central fixing and the 90° geometry ensure reliable seat location and repeatable indexing for efficient multi-edge use. Geometry and chip control that aid productivity With a 1.6 mm radius, 6.35 mm thickness and a double-sided chipbreaker, this insert is optimised for medium-depth cuts and interrupted feeds. The corner radius contributes to a robust cutting edge that improves surface finish and reduces edge chipping under variable engagement. The double-sided chipbreaker gives two usable cutting edges per side, improving edge economy and lowering tooling cost-per-part during series production. Practical benefits in process chains and setup Selecting SNMG190616 T9225 shortens set-up time where ISO components and holders are already in use, and its robust grade reduces the need for frequent edge changes in mixed production batches. The plate is intended for turning applications and performs best when matched to workholding stability, correct cutting data and appropriate coolant use. Combining this insert with compatible holders and standard clamping hardware supports reproducible results and faster ramp-up to full production. Contact Metav Werkzeuge for application advice or to request the SNMG190616 T9225 insert and detailed compatibility information Technical Data Article number: 6780836 SKU: 6780836-Tungaloy Manufacturer SKU: TUN6780836 Type designation: SNMG190616 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Numbers / Core technical data Plate size: 19 mm Plate thickness: 6.35 mm Corner radius: 1.6 mm Clearance (free) angle: 0° Included hole: with hole (cylindrical) Plate form: square Geometry angle: 90° Special features / Designs Material: carbide Coating: CVD-coated Grade: T9225 (universal for medium to heavy steel) Chipbreaker: double-sided Intended application: turning (external and internal) ISO-standardised insert Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The SNMG190616 T9225 insert is engineered primarily for steel machining, providing reliable performance in medium to heavy turning operations with the Tungaloy T9225 grade. Is this insert reversible and how many cutting edges are available? Yes; the SNMG190616 is a double-sided, square insert offering multiple usable cutting edges, which improves edge economy and reduces tooling costs per part. Which holder types are compatible with this SNMG plate? Compatibility depends on the holder’s form, clearance angle and fastening; the ISO designation, central cylindrical hole and square format mean it fits standard external holders and boring bars designed for SNMG inserts. How does the 1.6 mm corner radius affect machining? A 1.6 mm radius provides a stronger edge that improves surface finish and resistance to chipping in interrupted cuts, making it suitable for robust turning tasks. Does the T9225 grade require special cutting data? T9225 is a universal, robust grade for steel; normal cutting parameters for medium-to-heavy turning apply, but optimisation according to workpiece stability and machine power will enhance tool life and part quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated cemented carbide grade, a double‑sided chipbreaker and ISO compatibility for reliable turning under interrupted or unstable cutting conditions; order directly via Metav Werkzeuge or request application advice from our consultants. SNMG 190616 T9235 turning insert — Tungaloy The SNMG190616 T9235 Tungaloy insert is an ISO‑standard square indexable insert designed for external and internal turning, optimised for steel machining under interrupted or unstable cutting conditions. ISO SNMG 190616 profile CVD‑coated cemented carbide Double‑sided chipbreaker 90° square geometry, 1.6 mm radius Consistent performance where stability is limited The SNMG190616 T9235 is supplied in a CVD‑coated cemented carbide that combines toughness with wear resistance, specifically engineered for steel machining at reduced cutting speeds. The T9235 grade is a tough formulation that tolerates interrupted cuts and less stable set‑ups, which reduces the frequency of insert changes and minimises unplanned downtime. By favouring a robust grade over a harder, more brittle alternative, production runs benefit from a stable cutting edge and predictable tool life, especially when intermittent chip loads occur. Optimised chip control lowers rework and improves surface quality The insert’s double‑sided chipbreaker geometry eases chip formation and evacuation during both external and internal operations. A corner radius 1.6 mm assists in distributing cutting forces and contributes to a more consistent contact zone, which often results in improved surface finish and fewer marks from chatter or chip recutting. For operations with parts that produce variable chip shapes or with interrupted features, the chip control reduces the likelihood of secondary finishing and supports smoother downstream processes. Simple integration into ISO turning tool assemblies Compatibility is ensured by adherence to ISO sizing: the square 90° shape, the 0° clearance angle and standard mounting dimensions make the insert straightforward to match with common ISO holders. Key measurable data such as 6.35 mm thickness and 19 mm inscribed circle facilitate selection of the correct holder and clamping parts. The central cylindrical hole enables secure screw clamping, while the double‑sided design offers economical indexability for longer operating intervals and fewer tool‑change interventions. Match grade and chipbreaker to the application for best results This indexable insert is intended for external and internal turning where parts of steel are machined and where interrupted cuts or unstable setups occur. Choosing the correct chipbreaker and the T9235 grade helps maintain productivity and reduces total machining cost per part. The combination of a robust substrate and a tailored coating improves wear resistance in less favourable conditions, supporting repeatable component quality and higher overall productivity. For Tungaloy performance and practical availability, contact Metav Werkzeuge for tailored application advice and stock information — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical data Article number: 6786024 Manufacturer SKU: TUN6786024 Metav SKU: 6786024-Tungaloy Dimensions & measurable data Corner radius: 1.6 mm Thickness: 6.35 mm Inscribed circle / size: 19 mm Included angle: 90° Clearance angle: 0° Design & application Square indexable turning insert CVD‑coated cemented carbide Double‑sided chipbreaker Cylindrical hole for screw clamping Compatible with ISO turning holders Intended for external and internal turning; suitable for interrupted and unstable cuts FAQ What is the typical application for this insert? The SNMG190616 T9235 turning insert from Tungaloy is designed for external and internal turning operations, particularly where interrupted cuts or unstable machining conditions are expected. What material and coating does the insert use? This Tungaloy indexable insert is made of cemented carbide with a CVD coating, the T9235 grade being tailored for toughness and wear resistance in steel machining. What are the key dimensions and geometry of the insert? The SNMG190616 T9235 features a 19 mm inscribed circle, 6.35 mm thickness, 90° square geometry and a 1.6 mm corner radius; it is supplied with a cylindrical hole for standard screw clamping. How is compatibility with a toolholder determined? Compatibility depends on insert shape, clearance angle, tolerance class, mounting style, size and thickness; matching these parameters ensures correct fit and secure clamping in ISO‑standard holders. Which chipbreaker is advised for interrupted cuts? A double‑sided chipbreaker, as supplied with this SNMG insert, is recommended for interrupted or unstable cuts, since it promotes controlled chip formation and improved surface outcomes. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 190616 T9235 Wendeplatten - Tungaloy
SNMG190616 190616 T9235 Tungaloy-Wendeplatte für Drehen Die SNMG190616 T9235 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, konzipiert für stabile Spanbildung auch bei instabilen Schnittbedingungen. SNMG190616 T9235 von Tungaloy CVD-beschichtetes Hartmetall für Stahlbearbeitung Quadratische Form, 19 mm Kantenlänge Plattendicke 6,35 mm, Eckenradius 1,6 mm Mit zylindrischem Loch, doppelseitiger Spanbrecher Produktivität sichern durch robuste Schneidstofftechnik Die Wendeplatte basiert auf einem CVD-beschichteten Hartmetall der Sorte T9235, entwickelt für zähe Stahlanwendungen bei geringeren Schnittgeschwindigkeiten. Durch die Kombination aus zäher Schneidstoffmatrix und verschleißmindernder Beschichtung reduziert sich die Gefahr von Ausbrüchen an der Schneidkante, wodurch Stillstandszeiten und Werkzeugwechsel minimiert werden. Für Betriebe bedeutet das höhere Prozesssicherheit und konstante Fertigungsqualität selbst bei intermittierendem Schnitt und weniger stabilen Maschinenbedingungen. Präzise Passform, einfache Auswahl und schnelle Montage Die ISO-Genormung der Platte gewährleistet die Kompatibilität zu gängigen Außenhaltern und Bohrstangen, wobei Form, Freiwinkel, Befestigung, Größe und Dicke entscheidend sind. Die quadratische Plattenform mit 19 mm Kantenlänge, einer Plattendicke von 6,35 mm und einem Eckenradius von 1,6 mm erlaubt eine einfache Einspannung und reproduzierbare Ausrichtung. Diese klare Normierung reduziert Rüstzeiten und vereinfacht die Lagerhaltung, da Ersatzplatten und Unterlagen systematisch zugeordnet werden können. Zielgerichtete Anwendung für wirtschaftliche Zerspanung Die SNMG190616 eignet sich besonders für das Außen- und Innendrehen von Stahl, wenn bei instabilen Bedingungen oder unterbrochenem Schnitt eine zähe Sorte benötigt wird. Der doppelseitige Spanbrecher erhöht die Wirtschaftlichkeit, weil die Platte mehrfach nutzbar ist. Die Kombination aus robuster Spanbildung und definierter Plattengeometrie macht die Platte zur geeigneten Wahl für Werkstätten, die konstante Leistung und planbare Werkzeugkosten verlangen. Für produktive Stahldrehprozesse empfiehlt sich die SNMG190616 T9235 Tungaloy-Wendeplatte; Bei Unklarheiten oder Bedarf an ergänzenden Technischen Daten steht das Team von Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 gerne zur Verfügung. Produktmerkmale Artikelnummer: 6785872 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller Artikelnummer: 6785872 SKU: 6785872-Tungaloy Plattenform: quadratisch Plattengröße: 19 mm Plattendicke: 6,35 mm Eckenradius: 1,6 mm Freiwinkel: 0° Loch: mit Loch (zylindrisches Loch) Anwendung: Drehen Fakten Plattengröße: 19 mm Plattendicke: 6,35 mm Eckenradius: 1,6 mm Winkel: 90° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (CVD: chemische Gasphasenabscheidung) — Sorte T9235, zäh für Stahl bei niedrigerer Schnittgeschwindigkeit Spanbrecher: doppelseitig Lochstil: zylindrisches Loch Schneidstofftyp: CVD-beschichtetes Hartmetall Modellserie: ISO-Drehwendeschneidplatten FAQ Welche Werkstoffe sind mit der Platte am besten bearbeitbar? Die SNMG190616 T9235 Tungaloy-Wendeplatte ist für Stahl optimiert; Die Sorte T9235 bietet zähe Leistung bei niedrigerer Schnittgeschwindigkeit und ist daher besonders geeignet für unstabile Schnitte und unterbrochenes Drehen. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius von 1,6 mm sorgt für robuste Schneidkantenstabilität und verbessert die Spanformung, was zu gleichmäßigerer Oberfläche und längerer Standzeit bei wechselnden Schnittbedingungen führt. Ist die Platte mit meinen ISO-Haltern kompatibel? ISO-Genormung bedeutet, dass Form, Freiwinkel, Befestigung, Größe und Dicke die Kompatibilität bestimmen; Bei Unsicherheiten hilft die Angabe der Halterform und Toleranzklasse, um die passende Einspannung zu bestätigen. Welche Vorteile bietet die CVD-Beschichtung konkret? Die CVD-Beschichtung reduziert Kantenverschleiß und verbessert Verschleißfestigkeit bei zähen Stählen; Die Sorte T9235 kombiniert diese Beschichtung mit einer zähen Schneidstoffmatrix für unterbrochene Schnitte. Warum ist ein doppelseitiger Spanbrecher vorteilhaft? Doppelseitige Platten erlauben die Nutzung beider Schneidkanten, erhöhen die Nutzungsdauer pro Platte und senken die Werkzeugkosten pro gefertigten Teil. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG 190616 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the robust square geometry to achieve consistent performance in steel turning; the T9235 grade delivers toughness for interrupted cuts while the ISO form ensures straightforward holder compatibility. Order the SNMG190616 T9235 insert directly via Metav Werkzeuge or consult the team for application support. SNMG 190616 T9235 — Indexable turning insert for turning, Tungaloy A SNMG190616 T9235 indexable turning insert designed for ISO-compliant external and internal turning of steel components, offering a balance of toughness and wear resistance for unstable conditions. CVD-coated carbide grade T9235 Square SNMG form with 90° lead 1.6 mm corner radius for strength Double-sided chipbreaker with hole Consistent cutting in demanding steel applications The combination of a CVD-coated surface and a tough carbide substrate means longer edge life under mixed cutting conditions. The T9235 grade is formulated for steel machining at moderate cutting speeds and is particularly resilient in situations with vibration or interrupted cuts. This results in fewer indexings per component and reduced tool change frequency, which supports steady production flow and predictable cost per part. Geometry engineered for process stability and chip control The square SNMG form with a 90° approach provides a versatile cutting geometry suitable for facing and general turning operations. The 1.6 mm corner radius increases edge strength for roughing passes, while the double-sided chipbreaker controls chip formation and evacuation to protect the workpiece surface. The insert’s hole (cylindrical) ensures secure clamping in standard ISO holders, contributing to repeatable positioning and dimensional stability. ISO compatibility and economical handling on the shop floor Manufactured to ISO plate dimensions, this indexable insert integrates into common holder systems when form, clearance, tolerance class, fixation and thickness are matched. The 6.35 mm thickness and 19 mm nominal size combine to give a robust contact area and good radial support, reducing the risk of chatter. As a standardised insert, it simplifies inventory management and allows rapid replacement, lowering downtime and improving overall shop productivity. Contact Metav Werkzeuge for tailored advice on the Tungaloy T9235 grade and to arrange supply of the SNMG190616 insert through Metav Werkzeuge. Technical data Article number: 6785888 Manufacturer SKU: TUN6785888 Model series: ISO turning inserts Facts ISO designation: SNMG190616 Corner radius: 1.6 mm Thickness: 6.35 mm Size: 19 mm Lead angle: 90° Clearance angle: 0° With cylindrical hole Special features Material: carbide Coating: CVD Chipbreaker: double-sided Plate form: square Application: Turning FAQ What materials is this insert designed for? The SNMG190616 T9235 insert is specified for machining steel; the T9235 carbide grade and CVD-coated surface are selected for toughness and wear resistance in steel applications. Which toolholders are compatible with this insert? Compatibility follows ISO plate form and dimensions; holders that accept SNMG plates with a cylindrical hole and matching thickness (6.35 mm) are suitable when form, clearance and fixation match. How does the chipbreaker affect machining? The double-sided chipbreaker delivers controlled chip formation for improved surface finish and safer chip evacuation, supporting stable turning in interrupted or unstable cutting conditions. Is the insert intended for roughing or finishing operations? With a 1.6 mm corner radius and a tough grade, the insert is well suited to general turning and roughing where edge strength and resistance to breakage are priorities Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190616 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a versatile square 19 mm format and a double-sided chipbreaker to maintain consistent turning performance even in unstable or interrupted cuts; order via Metav Werkzeuge or consult our specialists for application support. SNMG SNMG190616 T9235 ISO turning insert for turning by Tungaloy SNMG190616 T9235 Tungaloy-Wendeplatte is an ISO-standard indexable turning insert for external and internal turning, designed for compatibility with standard SNMG holders and clamping systems ISO-standard SNMG190616 turning insert CVD-coated carbide grade T9235 for steel Square 19 mm insert, 6.35 mm thick 1.6 mm corner radius, double-sided chipbreaker Engineered for reliable turning performance The ISO-standard geometry ensures predictable interchangeability across compatible holders: form, clearance angle, tolerance class, fastening, size and thickness determine fit. The square shape offers multiple usable cutting edges and a 90° approach to the workpiece, which supports common turning set-ups for both external and internal operations. With a 0° relief angle and repeatable seating dimensions, set-up time is reduced and tool-change reproducibility is enhanced, delivering steady process behaviour for batch and job-shop environments. Robust grade for unstable and interrupted cuts The CVD-coated T9235 grade is a tough, wear-resistant carbide formulation developed for machining steel at moderate cutting speeds and in less stable conditions. The coating protects the cutting edge and improves resistance to flank and crater wear, while the substrate toughness helps resist chipping during interrupted cuts. Combined with the double-sided chipbreaker, this composition supports stable chip control and improved surface finish even when rigidity is limited, translating into longer in-service life and fewer unplanned tool changes. Practical compatibility and simple workshop handling Dimensional clarity simplifies tooling logistics: the insert has a nominal size of 19 mm, a plate thickness of 6.35 mm, and a 1.6 mm corner radius, with a cylindrical hole for secure fastening. The indexable design fits the common SNMG family of holders and can be supplied with corresponding clamping sets and screws as part of a system. Clear specification of the insert geometry and grade reduces downtime, aids stock management and allows planning for predictable cycle times in both single- and multi-shift production. Contact Metav Werkzeuge for application advice on Tungaloy CVD-coated grade T9235 and ensure the correct holder and clamping for reliable production Technical data Article number: 6786045 SKU: 6786045-Tungaloy Manufacturer SKU: TUN6786045 Model series: ISO-Drehwendeschneidplatten Designation: SNMG190616 Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Angle: 90° Special features Material: carbide Coating/type: CVD-coated carbide, grade T9235 Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning System components: indexable insert, matching outer holder, clamping set and replacement screws FAQ What applications suit this insert best? The SNMG190616 T9235 indexable insert from Tungaloy is intended for external and internal turning operations where a robust, CVD-coated carbide is required, particularly in interrupted cuts or less stable set-ups. Which materials can be machined with this grade? The T9235 grade is formulated for machining steel; the combination of a tough substrate and CVD coating suits lower cutting speeds, unstable conditions and interrupted cuts commonly encountered with a range of steel alloys. How should the chipbreaker and grade be selected for a job? Select the chipbreaker and grade based on workpiece material, cutting parameters and machine/fixture rigidity; the SNMG190616 unit features a double-sided chipbreaker that provides adaptable chip control for varying conditions. What are the key dimensions and mounting details? The insert is a 19 mm square plate, 6.35 mm thick, with a 1.6 mm corner radius and a cylindrical hole for fixation; compatibility with holders depends on form, free angle, tolerance class, fastening method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190624 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable edge strength combine in the SNMG190624-THS insert: the T9215 CVD-coated cemented carbide delivers high productivity in medium-steel turning while the THS chipbreaker supports continuous to lightly interrupted cuts; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection. SNMG 190624 T9215 indexable insert for turning — Tungaloy SNMG190624-THS T9215 Tungaloy indexable insert for ISO-format external and internal turning, engineered for stable medium-steel machining with a THS chipbreaker CVD-coated T9215 grade for wear resistance THS chipbreaker for continuous and light interrupted cuts Square 19 mm insert with 90° included angle 2.4 mm corner radius for robust edge strength Predictable productivity through grade and chip control The combination of the T9215 CVD-coated cemented carbide grade and the THS chipbreaker gives a clear productivity advantage in mid-range steel operations. The coating increases surface wear resistance while the substrate maintains fracture toughness, so the insert sustains higher cutting volumes before changeover is required. This results in measurable gains for batch production and long-run turning where consistent tool life reduces downtime and tool-change frequency. Secure seating and ISO compatibility for consistent results Designed to the ISO geometry series, the insert matches standard holder interfaces when form, relief angle, tolerance class, fastening method, size and thickness correspond. The square format with a 90° included angle and a cylindrical hole ensures positive clamping and repeatable positioning in compatible external holders or boring bars. With a plate thickness of 6.35 mm the insert provides a stable support area, reducing chatter risks and improving dimensional reliability in turned components. Edge geometry that balances strength and finish A corner radius of 2.4 mm increases edge strength and helps maintain form under moderate cutting forces while contributing to a good surface finish on typical turning passes. The 0° relief angle suits standard turning set-ups and, combined with the chipbreaker geometry, promotes controlled chip formation in continuous to slightly interrupted cuts. For best results, select a rigid holder and appropriate cutting parameters matched to workpiece stability and desired surface roughness. Practical guidance for integration and use This indexable insert is intended for external and internal turning of medium steels under steady cutting conditions; choose the THS chipbreaker and T9215 grade when prioritising both wear resistance and fracture security. When switching between holders, verify that seat form and clamp type match the ISO 190624 footprint to preserve clamping integrity. If machining becomes highly interrupted or the workpiece is unstable, evaluate alternative chipbreakers or adapt feed/speed to protect the cutting edge. For application advice, holder compatibility checks and ordering of the Tungaloy SNMG190624-THS T9215 indexable insert, contact Metav Werkzeuge — technical consultants are available by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to ensure the correct selection for the intended turning task Technical data Article number: 6773837 Manufacturer SKU: TUN6773837 Product name: SNMG190624-THS T9215 Tungaloy indexable insert Model series: ISO turning indexable inserts Core specifications ISO designation: 190624 Insert size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Relief angle: 0° Hole: with cylindrical hole Included angle: 90° Chipbreaker: THS Material: cemented carbide Features & suitability Coating / grade: T9215 (CVD-coated) Shape: square Application: turning (external and internal) Best for: medium steel; continuous to light interrupted cuts Compatibility: ISO holders (form, relief, tolerance, fastening, size, thickness) FAQ Which materials are suitable for this insert? The SNMG190624-THS T9215 Tungaloy indexable insert (SKU 6773837-Tungaloy) is optimised for medium steel machining and delivers a good balance of wear resistance and toughness for such materials. Can the insert be used for both external and internal turning? Yes. The SNMG190624-THS insert from Tungaloy is intended for ISO-format external and internal turning operations when mounted in an appropriate holder. What does the T9215 grade indicate for performance? T9215 denotes a CVD-coated cemented carbide grade offering high wear resistance combined with fracture toughness, making it a first choice for productive medium-steel turning. How should holders be matched to this insert? Match holder form, relief angle, tolerance class, fastening method, size and thickness to the ISO 190624 footprint to ensure secure clamping and repeatable positioning for the SNMG190624-THS insert. What are the key dimensional details to check before ordering? Verify ISO designation 190624, 19 mm size, 6.35 mm thickness, 2.4 mm corner radius, 0° relief angle and the cylindrical hole to confirm compatibility with the intended holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190624 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide cutting grade, robust THS chipbreaker geometry and ISO compatibility for reliable medium‑to‑heavy steel turning; order directly via Metav Werkzeuge or consult the specialists for setup and selection. SNMG 190624 T9225 Turning Insert (SNMG190624-THS) by Tungaloy — CVD‑coated carbide, THS chipbreaker The SNMG190624-THS T9225 is an ISO‑standard turning insert designed for external and internal turning operations, offering a robust universal grade for medium to heavy steel machining. CVD-coated carbide for steel machining Robust universal grade T9225 THS chipbreaker for interrupted cuts Reliable cutting performance in variable conditions The grade T9225 is a CVD‑coated carbide engineered for demanding turning tasks where variable engagement and occasional interruptions occur. Its formulation emphasises wear resistance and a balanced combination of hardness and toughness, which extends tool life under changing loads. For operations that alternate between stable and semi‑interrupted cuts, this grade reduces regrinding frequency and supports consistent production throughput. Geometry that supports stable, precise turning The insert’s geometry is tailored for stability: a square plate with a nominal size of 19 mm, a plate thickness of 6.35 mm, and an included angle of 90°. The relief or clearance is specified as 0°, while the corner radius of 2.4 mm helps to absorb cutting forces and improve surface finish on workpieces. The insert features a cylindrical hole, enabling secure fastening in ISO‑compatible holders. These measurable characteristics combine to provide repeatable seating, easy indexation and predictable cutting behaviour in established tool systems. Controlled chip formation and extended tool life The THS chipbreaker is designed to shape and evacuate chips reliably during both continuous and interrupted cuts. By improving chip control, the chipbreaker reduces the risk of workpiece damage and tool edge overload, which in turn supports longer edge life and steadier surface quality. When paired with the CVD‑coated carbide substrate, the system gives a good compromise between edge strength and coating‑assisted abrasion resistance, particularly beneficial for medium to heavy steel turning. System compatibility and practical workshop use As an ISO‑indexed insert, the component integrates into a modular system comprising the insert, a matching external holder or boring bar, clamping pad and replacement screws. Compatibility depends on form, relief, tolerance class, fastening method, size and thickness, so selecting the correct holder and clamp is essential for optimum performance. The insert’s universal characteristics make it suitable for general machining shops, subcontractors and maintenance departments seeking a robust, easy‑to‑index solution for a range of steel turning tasks. Choose the genuine Tungaloy T9225 grade for demanding steel turning — contact Metav Werkzeuge for application advice and fast availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6780691 Manufacturer SKU: TUN6780691 SKU: 6780691-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMG190624-THS Core data Size: 19 mm Plate thickness: 6.35 mm Corner radius: 2.4 mm Relief angle: 0° Included angle: 90° Special features Material: carbide Coating: CVD‑coated Grade: T9225 Chipbreaker: THS Shape: square Hole: with hole (cylindrical) Application: turning FAQ What workpiece materials is this insert suitable for? The Tungaloy SNMG190624‑THS in grade T9225 is intended primarily for medium to heavy steel machining and performs well where toughness is required for variable or lightly interrupted cuts. How does the THS chipbreaker influence machining? The THS chipbreaker shapes and breaks chips to improve evacuation and reduce edge load; this leads to steadier cutting, better surface finish and reduced risk of chip‑related damage when using the SNMG190624‑THS insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO indexing and fits compatible holders and boring bars when the form, clearance, tolerance class, fastening and thickness match the holder’s specification. What dimensions should be matched when selecting a holder? Match the 19 mm nominal size, 6.35 mm plate thickness, hole style and seating geometry; correct matching ensures secure clamping and repeatable positioning of the SNMG190624‑THS insert. Which advantages does the CVD coating provide? The CVD‑coated carbide offers improved abrasion resistance and longer life under continuous contact with steel, helping to maintain cutting edge integrity and extend service intervals. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 190624 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that balances toughness and tool life for steel turning, together with a robust THS chipbreaker and a 2.4 mm corner radius for secure performance in interrupted and unstable cuts; order directly via Metav Werkzeuge or contact our specialists for advice on holder compatibility and inventory. SNMG 190624 T9235 turning insert, CVD-coated carbide by Tungaloy — THS chipbreaker, 2.4 mm radius SNMG190624-THS T9235 Tungaloy insert designed for ISO-compliant external and internal turning applications in steel, optimised for unstable machining conditions and interrupted cuts CVD-coated carbide grade T9235 THS chipbreaker for interrupted cuts 2.4 mm corner radius for robust edge ISO SNMG 190624 insert, 0° clearance Durable wear resistance for reliable throughput The CVD-coated carbide construction and T9235 grade deliver a combination of toughness and wear resistance that is particularly effective in steel turning when cutting speeds are moderate and conditions are unstable. Chemical vapour deposition (CVD) produces a hard, wear-resistant top layer that reduces flank and crater wear, extending tool life under fluctuating loads. This results in fewer index changes and a more consistent production flow, which supports predictable machining cycles and reduced downtime. Secure chip control and stable cutting in interrupted operations The THS chipbreaker is shaped to control chips effectively during interrupted or semi-stable cuts, helping to avoid snarled swarf and machine downtime. The 2.4 mm corner radius contributes to a stronger edge that tolerates shock loads and reduces the tendency to chip at corners, while the 0° clearance geometry supports stable contact with the workpiece in typical turning setups. Together, these features improve component surface quality and retain tool integrity when cuts are less continuous. Seamless integration into ISO tooling systems Being part of the ISO turning indexable inserts range, the insert is compatible with standard SNMG holders and boring bars when the form, clearance angle, tolerance class, fastening arrangement, size and thickness match. The overall system comprises the indexable insert, a matching external holder or boring bar, and the necessary shim/clamp set with replacement screws. This standardisation simplifies tool inventory, reduces setup time and allows fast changeovers between machines. Practical selection and application guidance Intended primarily for turning of steel under lower cutting speeds and interrupted conditions, the insert offers a practical balance between durability and edge strength. Select the T9235 grade where toughness is required rather than maximum speed, and pair the insert with a holder that matches the SNMG 190624 geometry and the cylindrical hole mounting. For users seeking predictable results in mixed production runs, this configuration helps maintain stability across varied workpiece conditions while keeping regrind cycles manageable. Speak with Metav Werkzeuge's technical advisers to verify holder compatibility, availability and optimal application of the Tungaloy SNMG190624-THS indexable insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6786046 Manufacturer SKU: TUN6786046 SKU: 6786046-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: T9235 Chipbreaker: THS Core specifications Corner radius: 2.4 mm Thickness: 6.35 mm Size: 19 ISO designation: 190624 Clearance angle: 0° Included angle: 90° Plate shape: square Hole: with cylindrical hole Materials / special features Application: Turning Coating/type: CVD-coated carbide Designed for steel at lower cutting speeds and interrupted cuts Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness System components: indexable insert, matching holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The insert is designed primarily for steel machining; the T9235 grade and CVD-coated carbide construction are selected for toughness in lower-speed turning and interrupted cuts. Can the SNMG190624-THS be used for interrupted cuts? Yes. The THS chipbreaker and the 2.4 mm corner radius make the SNMG190624-THS well suited to interrupted or semi-stable cutting conditions. How is compatibility with holders determined? Compatibility depends on matching the insert's form, clearance angle (0°), tolerance class, fastening type, size and thickness; confirm that the holder accepts SNMG 190624 geometry and the cylindrical hole mounting. What does the designation T9235 indicate? T9235 denotes the carbide grade and coating approach—optimised for toughness and stable edge life when turning steel under challenging conditions rather than for the highest possible cutting speeds. Which items are required to assemble a complete cutting system? A complete setup includes the ISO indexable insert, a matching external holder or boring bar, a shim/clamp set and the required replacement screws; these elements together ensure correct clamping and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 250716 T9215 THS Wendeplatten - Tungaloy
High wear resistance, reliable fracture toughness and precise ISO form combine to deliver consistent productivity in medium-steel turning; the CVD-coated T9215 grade and THS chipbreaker ensure stable chips and long tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNMG 250716 T9215 indexable insert for Turning — CVD-coated carbide, 1.6 mm corner radius (Tungaloy) The SNMG 250716 T9215 is an ISO-format indexable insert designed for external and internal turning in medium-steel machining. CVD-coated carbide T9215 Optimised for medium steel machining THS chipbreaker for stable chips ISO SNMG form with 1.6 mm radius Increased throughput through a wear-resistant coating The combination of a CVD-coated surface and a T9215 carbide substrate provides a clear advantage in mixed production environments: higher wear resistance reduces tool changes and maintains cutting performance over longer runs. The coating reduces adhesion and thermal loading on the cutting edge, which in turn supports reliable productivity during continuous and slightly interrupted operations. For manufacturers seeking repeatable results, this specification delivers measurable process stability. Stable chip formation for safer, cleaner turning The integrated THS chipbreaker is designed to shape and evacuate chips reliably in medium-steel applications, helping to avoid long, stringy swarf and reducing machine stoppages. Controlled chip formation improves surface quality and lowers the likelihood of edge damage caused by poor chip flow. Coupled with the insert’s 1.6 mm corner radius, the system supports consistent cutting forces and predictable component finish in both roughing and semi-finishing passes. Simple integration with ISO-compliant holders and clamping systems Compatibility with the toolholder is determined by form, clearance angle (0°), tolerance class, fastening method, size and thickness. The ISO SNMG form and the square plate geometry permit straightforward mounting in standard external holders or BTA-style boring bars where a cylindrical hole is required. Correct selection of the matching outer holder, underlay/clamping set and replacement screws ensures secure seating and repeatable index positions, reducing setup times and maintaining repeatable machining accuracy. Practical application and selection guidance for turning shops Intended primarily for medium-steel machining, the insert performs well in continuous to light interrupted cuts and is suitable for both external and internal turning tasks. When combined with a suitably robust holder and stable machine setup, the element contributes to lower cycle times and fewer tool changes, presenting an attractive cost-per-part case for production and jobbing shops. The carbide construction and CVD coating support both productivity and predictable tool life, providing reliable, repeatable outcomes across batches. For high-productivity turning with Tungaloy’s CVD-coated T9215 grade, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6773845 SKU: 6773845-Tungaloy Manufacturer SKU: TUN6773845 ISO designation: SNMG250716-THS Item name: SNMG250716-THS T9215 Tungaloy indexable insert Facts Corner radius: 1.6 mm Clearance angle: 0° Plate thickness: 7.94 mm Plate size: 25 mm Insert angle: 90° Hole style: cylindrical hole Special features Grade/coating: T9215, CVD-coated carbide Chipbreaker: THS Application: Turning Model series: ISO turning indexable inserts Plate form: square With hole: yes FAQ Which materials is this insert best suited for? The insert is optimised for medium-steel machining; the T9215 CVD-coated carbide grade combines wear resistance with fracture toughness for continuous to light interrupted cutting. What holder specifications are required for correct fitting? Holder compatibility depends on ISO form, 0° clearance angle, tolerance class, fastening method, plate size and thickness; an ISO SNMG-compatible external holder or boring bar with matching clamping set is recommended. How does the THS chipbreaker affect machining performance? The THS chipbreaker promotes stable chip formation and controlled evacuation, improving surface finish and reducing the risk of swarf-related interruptions. Can this insert be used for internal turning as well as external turning? Yes, the ISO-format square insert with a cylindrical hole is suitable for both external and internal turning operations when paired with the appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 250716 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade engineered for toughness and consistent chip control together with ISO compatibility for rapid tool changes; the robust universal specification suits medium to heavy Stahl turning and supports interrupted cuts. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. SNMG 250716 T9225 ISO indexable turning insert (THS chipbreaker) — Tungaloy SNMG 250716 T9225 is an ISO‑standard indexable turning insert designed for external and internal turning; the square insert with THS chipbreaker is aimed at medium to heavy Stahl machining. CVD-coated carbide grade T9225 Durable universal grade for medium-heavy Stahl ISO SNMG geometry with 90° lead angle Square 25 mm insert with cylindrical hole Reliable cutting performance for medium to heavy Stahl turning The combination of a CVD‑coated surface and a wear‑resistant carbide substrate provides a balance of wear protection and toughness, which extends tool life under variable engagement. The T9225 grade is formulated as a robust universal option for medium to heavy Stahl machining, offering improved resistance to flank wear without sacrificing edge strength. The THS chipbreaker is engineered to promote controllable chip formation, reducing rework and protecting workpiece finish while maintaining productivity during longer production runs. ISO compatibility that reduces setup time and risk As part of the ISO indexable insert family, the SNMG profile simplifies tool selection and holder interchangeability. Key dimensional characteristics — 25 mm insert size, 7.94 mm thickness and a 1.6 mm corner radius — match standard holders when the form, relief and tolerance class, fastening method and thickness align. The 0° relief angle and 90° lead angle produce predictable cutting engagement for facing and turning operations, enabling quicker changeovers and fewer alignment checks on the shop floor. This standardisation supports efficient machine utilisation and consistent batch output. Chip control and reliability under interrupted cuts The THS chipbreaker combined with the T9225 grade provides reliable chip evacuation even under interrupted cutting or varying depths of cut. The insert’s square form and central cylindrical hole secure a stable clamping interface, improving repeatability and reducing vibration. For workshops processing mixed batches or facing changes in material hardness, the insert’s toughness helps avoid premature edge failure. Where enhanced surface integrity is required, the controlled chip flow and robust edge stability contribute to reduced secondary finishing and higher first‑pass yields. For availability and tailored application advice on the Tungaloy SNMG 250716 T9225 indexable insert, contact Metav Werkzeuge—our technical team can confirm stock and suitability and provide cutting‑condition recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6781282 SKU: 6781282-Tungaloy Manufacturer SKU: TUN6781282 Dimensions / Core data Insert size: 25 mm Thickness: 7.94 mm Corner radius: 1.6 mm Relief angle: 0° Lead angle: 90° Materials / Special features Material: carbide Grade: T9225 Coating: CVD-coated Chipbreaker: THS Insert shape: square Hole: with cylindrical hole Application: turning (external and internal) Model series: ISO indexable turning inserts FAQ Is this insert suitable for interrupted cuts? The SNMG 250716 T9225 insert with the THS chipbreaker is specified for interrupted and variable engagement conditions; the T9225 grade provides added toughness for such applications. Which materials can be machined with this insert? This insert is formulated primarily for medium to heavy Stahl machining; its robustness and coating also support a broad range of general engineering steels. What are the key dimensions to check when selecting a holder? Confirm insert size (25 mm), thickness (7.94 mm), corner radius (1.6 mm), relief angle (0°) and the SNMG form to ensure compatibility with the chosen holder and clamping system. How does the THS chipbreaker affect surface finish? The THS chipbreaker promotes predictable chip formation and evacuation, which helps maintain a consistent surface finish and reduces the need for additional finishing on many turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 250716 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of reliable performance in interrupted turning, compatibility with ISO holders and a CVD-coated carbide grade engineered for low cutting speeds. Order the SNMG250716-THS insert directly via Metav Werkzeuge or ask the consultants for application advice. SNMG 250716 T9235 — Indexable Turning Insert for Turning, Tungaloy SNMG250716-THS T9235 is an ISO-standard indexable turning insert designed for external and internal turning in steel with proven stability in interrupted cuts CVD-coated carbide for interrupted cuts ISO-standard form for broad holder compatibility Tough grade for unstable, low-speed cutting Square shape with 90° cutting angle Consistent performance under interrupted cutting conditions The CVD-coated carbide composition and the tough grade T9235 deliver reliable cutting when conditions are variable or when the cut is interrupted. The combination of substrate and coating promotes stable chip formation and reduces flank wear at lower cutting speeds, which is especially beneficial in job-shop environments and when dealing with less rigid set-ups. This focus on machining stability supports predictable tool life and fewer production interruptions. Seamless integration with standard tooling systems Manufactured to the ISO-standard geometry, the insert is compatible with common external holders and boring bars when form, clearance angle, tolerance class, fixation and thickness match. The square design with a 90° cutting angle and a 0° clearance calls for correct holder selection to exploit the insert’s full potential. Compatibility is primarily determined by shape and thickness, enabling fast replacement and minimal set-up time on standard turning lathes. Robust coating and material for demanding steel operations The insert’s CVD-coated carbide construction combines a wear-resistant coating with a tough carbide substrate, making the grade particularly suited to steels at lower cutting speeds and to operations where interruption or instability is expected. The coating increases resistance to built-up edge and thermal effects, while the substrate maintains edge strength, resulting in a balanced performance profile between wear resistance and fracture toughness. Practical selection advice for efficient turning For external or internal turning select a chipbreaker and grade according to the workpiece material, machining method and machine stability. The THS chipbreaker is optimised for producing manageable chips in common steel turning tasks, while the 1.6 mm corner radius supports robustness at the cutting edge. Where maximum surface finish is required, consider adjusting feed and cutting speed to match the grade’s lower-speed optimisation for best results. Contact Metav Werkzeuge for tailored application support and delivery options for the Tungaloy SNMG250716-THS insert. Technical data Article number: 6786047 Manufacturer SKU: TUN6786047 SKU: 6786047-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMG250716-THS Grade: T9235 Facts Corner radius: 1.6 mm Plate size: 25 mm Plate thickness: 7.94 mm Cutting angle: 90° Clearance angle: 0° Special features Carbide substrate CVD-coated carbide THS chipbreaker Square plate form with cylindrical hole Suitable for turning of steel ISO-standard insert for holder compatibility Optimised for interrupted cuts and unstable conditions FAQ What materials is this insert suited for? The Tungaloy SNMG250716-THS insert is formulated for the machining of steel and performs well under interrupted cutting and less stable conditions thanks to its T9235 tough grade. How does the THS chipbreaker affect chip control? The THS chipbreaker is designed to produce short, controllable chips in turning operations, improving evacuation and reducing the risk of chip entanglement in unstable setups when using the SNMG250716-THS insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO geometry; compatibility depends on matching holder form, fixation, tolerance and thickness to the SNMG250716-THS dimensions and bore style. What cutting conditions suit this grade best? The T9235 grade is optimised for lower cutting speeds and applications with interrupted cuts or marginal rigidity, where toughness and stable chip formation are priorities. Which corner radius is available and what are the benefits? The insert has a 1.6 mm corner radius, offering enhanced edge strength for heavy cuts and improved tool life in applications prone to vibrations or impact. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 250724 T9215 Wendeplatten - Tungaloy
Take advantage of a robust, ISO‑compatible insert that combines CVD‑coated cemented carbide with a THS chipbreaker for stable chip control and high productivity in medium steel turning. Order the SNMG250724‑THS T9215 insert through Metav Werkzeuge or request cutting-data advice from our consultants. SNMG 250724 T9215 Tungaloy turning insert — CVD‑coated carbide, THS chipbreaker A SNMG250724‑THS T9215 Tungaloy indexable insert engineered for external and internal turning in ISO‑based tool systems, offering high wear resistance and consistent performance for medium steel machining CVD‑coated cemented carbide for wear resistance Ideal for medium steel machining ISO‑standard SNMG geometry for broad compatibility THS chipbreaker for reliable chip control Boosted productivity through optimised coating and grade The combination of a CVD coating with a cemented carbide substrate in the T9215 grade delivers a measurable improvement in tool life under typical turning conditions for medium steels. This coating reduces abrasive wear and maintains edge integrity during continuous and lightly interrupted cuts, which translates into fewer insert changes and longer uninterrupted production runs. The technical choice of T9215 favours a balance between high wear resistance and fracture toughness, enabling stable performance where productivity and repeatability matter most. Stable machining thanks to tailored geometry and chip control The insert’s THS chipbreaker and its square SNMG form produce controlled chip formation across a range of cutting depths. With a corner radius of 2.4 mm and a nose angle of 90°, the geometry supports consistent surface finish and dimensional stability when turning external and internal profiles. The insert’s cylindrical locating hole and standard ISO tolerances ensure secure clamping in appropriate holders, reducing vibration and maintaining repeatable positioning in serial production. System compatibility and selection guidance for secure processes Designed as part of an ISO‑standard insert system, the unit is intended for use with suitable external holders or boring bars together with correct shim and clamping sets. The 0° relief angle promotes direct contact for stable cutting when paired with properly matched toolholders. For applications in medium steel, the T9215 grade and THS chipbreaker form a reliable combination; selecting an alternative chipbreaker or grade may be appropriate for different materials or interrupted cuts, guided by machining stability and desired surface quality. Contact Metav Werkzeuge for tailored cutting parameters and order support for Tungaloy SNMG250724‑THS inserts — phone or email assistance is available to match the insert to the specific holder and machining task Technical data Article number: 6773835 Manufacturer SKU: TUN6773835 SKU: 6773835‑Tungaloy Product label: SNMG250724‑THS T9215 Tungaloy‑Wendeplatte Model series: ISO‑Drehwendeschneidplatten Insert size: 25 mm Plate thickness: 7.94 mm Corner radius: 2.4 mm Included angle: 90° Relief angle: 0° ISO code: 250724 Material: cemented carbide Grade/coating: T9215 (CVD‑coated) Chipbreaker: THS Hole: with cylindrical hole Shape: square Application: turning (external and internal) FAQ What materials is this insert suited for? The SNMG250724‑THS T9215 insert is primarily intended for medium steel machining; the T9215 grade combines wear resistance and fracture toughness suited to continuous and lightly interrupted cuts. Which holders are compatible with the SNMG250724‑THS geometry? Compatibility depends on ISO SNMG form, clamping type, free angle and tolerance class; the insert fits standard SNMG external toolholders and appropriate boring bars designed for 25 mm square inserts with a cylindrical locating hole. How does the THS chipbreaker affect machining? The THS chipbreaker promotes consistent chip control and stable cutting forces, improving surface finish and process reliability when machining steels under appropriate cutting conditions. What is the significance of the 2.4 mm corner radius? A 2.4 mm radius balances edge strength and finisher capability: it increases edge robustness for heavier cuts while still supporting acceptable surface quality in finishing passes. Can this insert be used for interrupted cuts? The T9215 grade is suitable for continuous to lightly interrupted cuts; for severe interruptions or very hard materials, a different grade or geometry may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 250724 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide and THS chip control delivers reliable productivity and long tool life for medium-steel turning; order the SNMG250724 T9215 insert directly via Metav Werkzeuge or consult their specialists for process-matched selection. SNMG250724 T9215 – SNMG indexable insert for turning, Tungaloy The SNMG250724 T9215 is an ISO‑format indexable turning insert for external and internal turning, designed to deliver wear resistance and fracture toughness in medium‑steel machining. CVD-coated carbide grade T9215 Optimised for medium steel turning THS chipbreaker for reliable chips ISO SNMG 25 × 7.94 mm, 90° geometry Stable chip control for higher output The combination of a THS chipbreaker and a CVD-coated carbide substrate provides consistent chip formation, reducing manual intervention and cycle interruptions. The chipbreaker geometry converts continuous cut into manageable chip segments, which lowers the risk of entanglement — a tangible productivity gain in series turning. For process planners, improved chip control means fewer stoppages, reduced rework and a steadier machining rhythm when working with medium‑hard steels. Robust wear resistance and fracture safety The T9215 grade balances high wear resistance with enhanced fracture toughness, making it suitable for continuous to slightly interrupted cuts in medium steel. The carbide backing with the CVD finish extends edge life under elevated temperatures and abrasive conditions, which reduces index changes and tool changeover frequency. This technical balance translates into lower overall machining costs through longer insert life and fewer unexpected tool failures. Precision geometry for reliable results An ISO SNMG form with 90° cutting geometry and a 2.4 mm corner radius* supports predictable part profiles and repeatable tolerances. The square plate shape with a cylindrical locating hole ensures secure clamping and simple orientation in compatible holders. For workshop planners, this means easy stocking and compatibility with standard SNMG toolholders, while the 0° relief angle and plate thickness of 7.94 mm contribute to mechanical stability under load. Practical handling and application advice The insert is intended for turning applications and integrates into conventional SNMG tooling systems alongside the recommended shim and clamp sets. Select the T9215 variety when machining medium steels where a balance of wear life and edge security is required; choose a different grade or chipbreaker only if material or process demands differ significantly. Clear labelling and ISO standardisation simplify logistics for production environments and support systematic tool management. For high‑productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6773879 Manufacturer SKU: TUN6773879 Model series: ISO‑turning indexable inserts Material: carbide Application: turning Facts Corner radius: 2.4 mm Insert size: 25 mm Plate thickness: 7.94 mm Relief angle: 0° Cutting angle: 90° ISO designation: 250724 Design & features Plate form: square Hole: with cylindrical locating hole Chipbreaker: THS Coating / grade: T9215 (CVD‑coated carbide) Compatible system: ISO SNMG indexable insert for external and internal turning FAQ What materials is this insert best suited for? The SNMG250724 T9215 insert is optimised for medium steel machining; the T9215 CVD coating provides wear resistance and toughness suitable for continuous to lightly interrupted cuts. Which chipbreaker does the insert use and what is the benefit? This indexable insert features the THS chipbreaker, which promotes stable chip control and reduces risk of chip-related interruptions during turning operations. Is the insert compatible with standard SNMG holders? Yes, the SNMG250724 conforms to ISO SNMG dimensions and seats, so it is compatible with holders designed for SNMG inserts when matched for form, thickness and clamping style. How does the T9215 grade influence tool life and process security? The T9215 carbide grade combines wear resistance with fracture safety, extending edge life under machinings of medium steel and improving process reliability in production runs. What are the key geometric specifications to consider when selecting a holder? Key dimensions are the 25 mm size, 7.94 mm thickness, 2.4 mm corner radius and 90° cutting geometry; the holder must match these parameters and accept an SNMG insert with a cylindrical locating hole Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 250724 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade and ISO‑standard geometry for consistent medium to heavy steel turning, ensuring reliable chip control and extended tool life; order directly via Metav Werkzeuge or consult our specialists for cutting-parameter support. SNMG250724-THS T9225 indexable turning insert by Tungaloy — CVD-coated carbide, 90° square A SNMG250724-THS T9225 indexable insert designed for turning applications, offering a universal, tough grade for interrupted cuts and variable engagement in steel machining CVD-coated carbide grade T9225 Robust universal grade for medium/heavy steel THS chipbreaker for stable chip control ISO‑standard SNMG 90° square insert Improved productivity for medium and heavy steel turning The CVD-coated T9225 carbide composition delivers a balance of toughness and wear resistance that reduces unscheduled tool changes. By combining a tougher substrate with a protective coating, the insert maintains a stable cutting edge under fluctuating cutting forces, which translates into longer tool life and fewer interruptions in production. This benefit is particularly relevant for workshops machining structural and quenched steels where chip formation can vary. Clear compatibility and straightforward mounting Designed to the ISO series, the SNMG geometry and square plate format ensure predictable seating and alignment in standard external holders. The insert is specified with a 90° wedge angle, 0° clearance angle and a cylindrical hole, making it compatible where form, free angle, tolerance class, fastening, size and thickness define holder suitability. Mounting is simplified by standard clamping interfaces, which reduces set-up time and supports consistent component tolerances. Stable chip control for safer, cleaner turning The integrated THS chipbreaker has been developed to guide chips away from the cutting zone, improving evacuation and reducing re-cutting of swarf. Better chip control leads to enhanced surface quality and reduces the risk of tool damage from tangled chips, supporting safer operation and lower secondary finishing effort. For applications with slight interruptions or variable cut depths, the chipbreaker helps maintain a steady process window. Practical choice for mixed-production environments As a universal grade, this insert suits shops that must switch between different steel grades or face inconsistent engagement. The combination of a robust grade and engineered chip control offers a pragmatic path to reproducible component quality and efficient batch changeovers. Where process reliability and predictable wear behaviour matter, the insert supports balanced productivity without demanding highly specialised cutting data. For tailored recommendations on insert selection or to discuss compatible holder systems for the Tungaloy SNMG250724-THS T9225, contact Metav Werkzeuge for expert advice and swift supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6780783 SKU: 6780783-Tungaloy Manufacturer SKU: TUN6780783 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Geometry: SNMG (square, 90°) ISO code: 250724 Corner radius: 2.4 mm Clearance angle: 0° Plate size: 25 mm Thickness: 7.94 mm Special features Grade: T9225 (CVD-coated carbide) Chipbreaker: THS Hole: with cylindrical hole Plate form: square Application: Turning (external and internal) FAQ What materials is this insert best suited for? This insert is optimised for steel machining; the T9225 grade is tailored for medium to heavy steel turning and performs well under variable engagement. How does the THS chipbreaker improve performance? The THS chipbreaker controls chip shape and evacuation, reducing re-cutting and improving surface finish when using this Tungaloy indexable insert. Is the SNMG250724-THS compatible with standard holders? Compatibility is governed by form, free angle, tolerance class, fastening, size and thickness; the ISO SNMG geometry facilitates use in standard external holders. What corner radius does the insert have and why does it matter? The insert has a 2.4 mm corner radius, which balances strength and surface finish—larger radii provide greater edge strength for heavier cuts. Can this insert handle interrupted cuts? Yes, the robust T9225 grade offers increased toughness suited to slightly interrupted or variable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 250724 T9225 Wendeplatten - Tungaloy
Take advantage of robust CVD-coated carbide and the proven T9225 grade for reliable medium to heavy steel turning; the ISO SNMG geometry and THS chipbreaker ensure stable chip control and edge life. Order directly via Metav Werkzeuge or consult our specialists for toolholder compatibility. SNMG 250724 T9225 — ISO SNMG 250724 turning insert, CVD-coated carbide by Tungaloy SNMG 250724 T9225 is an ISO-format indexable insert designed for general turning applications where strength and versatility are required; suitable for external and internal turning, especially in steel machining. ISO SNMG geometry 250724 CVD-coated carbide grade T9225 Chipbreaker THS for interrupted cuts 2.4 mm corner radius for edge strength High, consistent performance in medium to heavy steel turning The insert is manufactured as a CVD-coated carbide grade T9225, a robust universal composition developed for demanding turning tasks. Its formulation provides a balance between wear resistance and toughness, which is especially valuable when cutting conditions vary or when light interruptions occur in the cut. As a result, the component offers improved tool life and fewer index changes, supporting steady production throughput and reducing downtime in serial machining. Geometry and chip control that improve process stability Built to the ISO SNMG 250724 form with a THS chipbreaker, the insert promotes controlled chip formation in a wide range of steels. The 2.4 mm corner radius increases edge strength and reduces the risk of premature chipping under radial load, while the square plate format and the cylindrical hole design enable secure clamping and repeatable positioning on standard holders. These geometric features translate directly into more predictable surface finishes and consistent dimensional results. Practical compatibility and set-up considerations The insert fits ISO-compliant holders; compatibility depends on form, clearance, tolerance class, fastening and size. The listed plate thickness of 7.94 mm and the 90° included angle suit common turning toolholders used for robust external and internal operations. When selecting a holder and clamping set, match the insert’s thickness, hole style and tolerance class to ensure secure seating and optimal cutting geometry, thereby safeguarding cutting-edge life and part quality. Choosing the right grade and application guidance Grade T9225 is intended as a universal, tough option for medium to heavy steel machining when occasional interrupted cutting or variable engagement requires extra toughness. For customers prioritising highest possible wear resistance on uninterrupted runs, a harder, more wear-focused grade may be considered, whereas T9225 delivers a favourable compromise for mixed-production environments. Use the THS chipbreaker where moderate chip control and improved evacuation are required for turned parts. For technical advice on toolholder compatibility or to request matching clamping sets and spare screws, contact Metav Werkzeuge — technical consultation and order processing are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6780682-Tungaloy Manufacturer SKU: TUN6780682 Manufacturer article number: 6780682 Core specifications Insert designation: SNMG250724-THS ISO code: 250724 Plate size: 25 mm Plate thickness: 7.94 mm Corner radius: 2.4 mm Clearance angle: 0° Included angle: 90° Materials & features Material: carbide Coating: CVD Grade: T9225 Chipbreaker: THS Hole: with cylindrical hole Plate shape: square Model series: ISO turning inserts Application: turning FAQ What materials is this insert suited for? The SNMG 250724 T9225 insert is formulated for medium to heavy steel machining; the CVD-coated carbide and T9225 grade give a balance of wear resistance and toughness for variable cutting conditions. How does the THS chipbreaker affect machining? The THS chipbreaker on this ISO SNMG insert promotes controlled chip formation and evacuation, improving process stability and surface quality during turning operations. Which toolholders are compatible with this insert? Compatibility requires matching form, clearance, tolerance class, fastening, size and thickness; the SNMG250724 geometry and 7.94 mm thickness suit standard ISO SNMG toolholders designed for square inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 250724 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade, a robust chipbreaker geometry and ISO conformity to maintain productivity under unstable cutting conditions; order directly via Metav Werkzeuge or consult our specialists for matching holders and clamping sets. SNMG 250724 T9235 turning insert (SNMG250724-THS) by Tungaloy A SNMG250724-THS indexable turning insert for external and internal turning, engineered for interrupted cuts and unstable conditions CVD-coated carbide grade T9235 for toughness Designed for unstable or interrupted cuts 2.4 mm nose radius for controlled chip formation Square SNMG form with cylindrical hole Maintain productivity in unstable turning operations The CVD-coated carbide composition combined with the T9235 grade delivers a tool material geared to toughness rather than maximum cutting speed, which reduces the risk of premature edge chipping in interrupted or unstable turning. This means a steady process output when conditions vary: longer productive tool life under shock loads and fewer unscheduled insert changes. The design philosophy targets consistent part throughput and reduced process interruptions, making the insert particularly suitable for heavy-duty finishing and semi-finishing where stability is limited. Better chip control and surface integrity from optimised geometry The THS chipbreaker geometry and a 2.4 mm nose radius are chosen to balance chip control and surface finish. The chipbreaker helps to segment and guide swarf reliably, which lowers the chance of chip entanglement and protects the machined surface. The moderate nose radius supports dimensional control without sacrificing edge strength, so one obtains improved workpiece finish and repeatability even when feeds and depths of cut fluctuate. In practice, this reduces rework and inspection time while supporting consistent part quality. Simple integration with ISO tooling systems for fast setup Compliance with ISO dimensions and the square SNMG form permits straightforward integration into standard external holders or boring bars. Compatibility with the clamping system is determined by form, relief angle, tolerance class, fastening method, size and thickness, so matching the plate to an appropriate holder or backplate is essential. The insert has a cylindrical hole, a plate thickness of 7.94 mm and an inscribed circle of 25 mm, which simplifies procurement of replacement inserts and reduces machine downtime by allowing immediate substitution with like-for-like components. Material and coating choices that reduce operating cost The CVD-coated surface treatment provides wear resistance suited to steels at moderate speeds, while the tough T9235 grade supports cutting in less stable setups and under interrupted conditions. The net effect is a reduction in tool consumption per produced part and improved process reliability. For operations where tool life and repeatability are priorities over maximum cutting velocity, this combination presents a favourable cost-benefit balance and helps to lower the total cost of machining over production runs. Contact Metav Werkzeuge to request compatible holders and order the Tungaloy SNMG 250724 T9235 insert for resilient turning performance; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6786025 Manufacturer SKU: TUN6786025 SKU: 6786025-Tungaloy Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Nose radius: 2.4 mm Relief angle: 0° Included angle: 90° Thickness: 7.94 mm Inscribed circle / size: 25 mm Special features CVD-coated carbide Grade T9235 (tough, for steel at lower cutting speeds) Chipbreaker: THS Plate form: square (SNMG) Hole: with cylindrical hole ISO designation: SNMG250724-THS Application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The Tungaloy SNMG 250724 T9235 insert is optimised for steel machining, with the CVD-coated carbide and T9235 grade providing toughness for interrupted cuts and unstable conditions. How does the chipbreaker influence performance? The THS chipbreaker on this indexable insert improves chip segmentation and evacuation, which helps maintain surface quality and reduces the risk of chip-related interruptions during turning. Which holders are compatible with this ISO plate? Compatibility depends on ISO form and dimensions; the SNMG250724-THS fits standard SNMG external holders and boring bars that accept a 25 mm inscribed circle, 7.94 mm thickness and a square plate with a cylindrical hole. Can this insert be used for internal turning as well as external turning? Yes, the geometry and ISO form of the insert make it suitable for both external and internal turning applications when used with the correct holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 250724 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade, proven THS chipbreaker geometry and a robust 2.4 mm corner radius for stable turning under interrupted or unstable conditions; order the insert directly via Metav Werkzeuge or contact our consultants for application guidance. SNMG 250724 T9235 indexable insert for turning – Tungaloy A SNMG250724-THS T9235 indexable insert designed for external and internal turning, offering a tough CVD-coated carbide grade for interrupted cuts and unstable machining conditions. CVD-coated carbide T9235 for steel THS chipbreaker for reliable chip control 2.4 mm corner radius for increased edge strength ISO SNMG 250724 square insert, cylindrical hole Increased process reliability when machining steel The combination of a CVD-coated carbide substrate and the T9235 grade delivers a tough, wear-resistant edge that suits lower cutting speeds and conditions with frequent interruptions. The microstructure of the coating improves resistance to flank wear and preserves cutting geometry for longer, which results in fewer tool changes and more predictable productivity. For operations where stability is limited, this grade provides a controlled trade-off between hardness and toughness, reducing the risk of premature edge chipping while maintaining acceptable surface quality on steel. Better chip control and longer service life The integrated THS chipbreaker is engineered to support consistent chip control across a range of feed rates, lowering the likelihood of tangling and easing swarf handling in automated cells. Combined with a 2.4 mm corner radius, the insert withstands heavy engagement and interrupted cuts, reducing edge failure. The insert’s 0° clearance ensures a positive seating against the workpiece and straightforward orientation in the correct holder type, contributing to repeatable clamping and consistent cutting performance. Easy integration and reliable compatibility in ISO systems Built to the ISO SNMG 250724 designation with a square profile and a cylindrical hole, the insert matches common ISO holders when form, relief angle, tolerance class, clamping method, size and thickness are observed. The plate thickness of 7.94 mm and nominal size 25 mm make it suitable for many standard external and internal turning holders; the presence of a hole simplifies secure clamping and indexability. Selection of the correct holder and matching the insert’s chipbreaker and grade to the workpiece stability will ensure the insert performs reliably in everyday production. For tailored recommendations on using Tungaloy’s T9235 inserts in turning applications, contact Metav Werkzeuge for specific holder suggestions and stock availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6786048 Manufacturer SKU: TUN6786048 Brand SKU: 6786048-Tungaloy Core data Designation: SNMG250724-THS Grade: T9235 Corner radius: 2.4 mm Thickness: 7.94 mm Size: 25 mm Relief angle: 0° Included hole: with cylindrical hole Shape: square Included chipbreaker: THS Materials & features Material: carbide Coating: CVD-coated Typical application: turning (external and internal) Best suited for: steel, unstable conditions, interrupted cuts System composition: ISO indexable insert, matching external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The Tungaloy SNMG250724-THS T9235 insert is formulated for machining steel, particularly where toughness is required for interrupted cuts or unstable conditions. How does the THS chipbreaker affect machining? The THS chipbreaker on the SNMG250724-THS promotes controlled chip formation, improving swarf evacuation and reducing the risk of chip-related interruptions during turning operations. Is this insert compatible with standard ISO holders? Yes, the insert follows the ISO SNMG 250724 designation; compatibility depends on matching holder form, relief angle, tolerance class, clamping method, size and thickness. What advantage does the 2.4 mm corner radius provide? A 2.4 mm corner radius increases edge strength and reduces the likelihood of chipping in heavy cuts or interrupted machining, improving overall tool life. Which coating and substrate does the insert use? The product uses a CVD-coated carbide substrate in the T9235 grade to balance toughness and wear resistance for demanding turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215 and a 0.8 mm corner radius for reliable, high-productivity turning of medium steels; compatible with ISO toolholders and suitable for continuous to light interrupted cuts. Order the SNMM120408-57 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMM 120408 T9215 ISO turning insert (CVD-coated carbide) by Tungaloy The SNMM120408-57 T9215 is an ISO turning indexable insert engineered for medium steel machining, combining high wear resistance with robust fracture protection for productive, repeatable cutting. CVD-coated carbide grade T9215 Optimised for medium steel machining Square ISO form, 0.8 mm corner radius For continuous to light interrupted cuts High-performance grade for medium-steel productivity The insert features a CVD-coated carbide substrate in grade T9215, designed as a first choice for medium steel applications. The coating improves surface hardness and heat resistance, which translates into higher wear resistance and extended tool life under continuous operation. This results in fewer indexings and less machine downtime, supporting higher throughput in batch and series production. The combination of coating and substrate also enhances fracture resistance, making the insert suitable when stability is variable or when light interruptions occur. Geometry and what it means for component quality The insert's square form with an 0.8 mm corner radius delivers a robust cutting edge that balances finishing capability and edge strength. A larger corner radius helps distribute cutting forces, improving surface finish and reducing the risk of chipping on interrupted cuts. The insert thickness of 4.76 mm and the 90° approach angle provide stable support in the pocket, while the 0° clearance contributes to predictable cutting behaviour. These geometric choices ensure consistent dimensional results and reliable workpiece quality during turning operations. Compatibility and mounting considerations Compatibility with toolholders is determined by the insert's ISO form, size 120408, fastening style and thickness. This insert is supplied with a cylindrical hole, allowing secure clamping in standard ISO-compatible external holders or boring bars when the holder supports the SNMM geometry. Correct selection of a matching holder and clamping set ensures repeatable seating and concentricity, which is essential for maintaining tolerances and achieving optimal tool life. The system approach—insert, holder, shim and clamping screw—supports quick index changes and predictable set-up times. Recommended applications and process benefits Designed for turning tasks, the insert excels in external and internal turning of medium steels under continuous and light interrupted cutting regimes. The T9215 grade is intended for users seeking a balance between tool life and cutting-edge security: it enables productive machining without compromising on safety against brittle fracture. For shops aiming to raise throughput while preserving surface integrity, this insert supports both roughing passes at higher material removal rates and stepped finishing cuts where edge strength is required. For tailored advice on application or to secure genuine Tungaloy inserts such as the SNMM120408-57 T9215, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical Data Article number: 6773942 SKU: 6773942-Tungaloy Manufacturer SKU: TUN6773942 Designation: SNMM120408-57 Manufacturer: Tungaloy Core specifications Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 Relief angle: 0° Approach angle: 90° Grade: T9215 Special features CVD-coated carbide Square ISO form With cylindrical hole Suitable for medium steel machining For continuous and light interrupted cuts Compatible with ISO toolholders (form, tolerance, fastening) FAQ What materials is this insert best suited for? The SNMM120408-57 T9215 insert is optimised for medium steel machining; the CVD-coated carbide substrate provides wear resistance and fracture protection for these materials. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius increases edge strength and improves surface finish by distributing cutting forces, which is beneficial for both finishing passes and light interrupted cuts with the SNMM insert. Is the insert compatible with standard ISO toolholders? Yes, the SNMM form is an ISO-standard geometry; compatibility depends on matching the holder by form, relief angle, tolerance class, fastening and thickness. What cutting conditions is grade T9215 intended for? Grade T9215 is aimed at productive turning of medium steels under continuous to lightly interrupted cuts, offering a balanced combination of wear resistance and fracture toughness. Why does the insert have a cylindrical hole? The cylindrical hole enables secure and repeatable clamping in compatible holders, improving concentricity and reducing the risk of movement during heavy cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 120408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide grade T9225 and an ISO‑standard square geometry for consistent performance in medium to heavy turning tasks; the 0.8 mm corner radius and cylindrical mounting hole ensure stable cutting and easy clamping. Order directly via Metav Werkzeuge or contact their consultants for application advice. SNMM 120408 T9225 indexable insert for Turning — Tungaloy, ISO 120408 The SNMM120408-57 T9225 is an ISO‑standard indexable turning insert designed for medium to heavy steel turning, offering a robust CVD‑coated carbide grade and a 0.8 mm corner radius for stable engagement. CVD‑coated carbide grade T9225 Suited for medium to heavy steel turning ISO‑standard SNMM 120408 form with cylindrical hole 0.8 mm corner radius for improved cutting stability Reliable productivity for mixed and interrupted cuts The CVD‑coated carbide in this insert provides a balance between hardness and toughness that benefits repeated turning operations under changing cutting conditions. As a robust universal grade, T9225 sustains edge integrity during slightly interrupted cuts and variable engagement, reducing unscheduled tool changes and contributing to a more predictable machining cycle. The square geometry of the insert supports four indexing positions, which extends usable tool life and lowers tooling cost per component while maintaining consistent surface finish in steel applications. Fast set‑up and secure clamping for shop floor efficiency Built to the ISO profile SNMM 120408, the insert matches common external holders and boring bars where hole style, size and thickness are compatible. The cylindrical mounting hole simplifies alignment with standard screws and clamping kits, while the plate thickness of 4.76 mm and the nominal size 12 mm give clear criteria for holder selection. These measurable dimensions permit straightforward replacement and reduce set‑up time, so changeovers are quicker and machine uptime is higher. Controlled chip formation and thermal resistance The combination of the T9225 substrate and the surface finish from the CVD coating enhances thermal resistance and improves chip control in moderate to heavy steel removal. The integrally defined chipbreaker 57 assists in producing short, manageable chips, which benefits both automated and manual operations by lowering the risk of chip entanglement and improving tool‑to‑workpiece interaction. Additionally, the 0° clearance angle and the square form create stable flank support for the cutting edge, contributing to repeatable dimensional results. Practical application guidance and measurable benefits For turning tasks on medium to heavy steel, select this insert when process stability and tool longevity are priorities—especially where cutting conditions vary or interruptions occur. Matching the insert to a suitable external holder, and verifying fit by form, free angle and thickness, will maximise performance. The measurable advantages include extended tool life due to multiple indexing positions, reduced downtime from rapid replacements, and consistent surface quality that supports downstream operations. For tailored recommendations on feeds, speeds and holder pairing, technical consultation is available. Contact Metav Werkzeuge for tailored advice on matching holders and optimised cutting conditions for this Tungaloy insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and order options. Technical data Article number: 6780912 Manufacturer SKU: TUN6780912 Item designation: SNMM120408-57 T9225 Tungaloy insert Dimensions / core data Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Clearance angle: 0° Hole style: cylindrical hole Materials & special features Material: carbide Coating: CVD coating Grade: T9225 – universal, robust for medium to heavy steel turning ISO series: ISO turning inserts (SNMM 120408 form) Chipbreaker: 57 Typical application: external and internal turning FAQ What materials is this insert best suited for? The SNMM120408-57 T9225 insert is formulated for medium to heavy steel turning; the CVD‑coated carbide and chipbreaker selection favour interrupted cuts and variable engagement typical in steel machining. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge stability and distributes cutting forces over a larger area, improving tool life and producing a robust cutting action on the workpiece. Is this insert compatible with standard ISO holders? Yes, the SNMM 120408 geometry follows ISO‑standard dimensions; compatibility is determined by form, free angle, tolerance class, fastening and thickness, so matching the holder marked for SNMM 120408 is recommended. What benefits does the CVD coating provide? The CVD coating enhances thermal resistance and wear performance, reducing flank wear and aiding chip control under higher temperatures and sustained cutting loads. How many usable edges are available with this square insert? Due to its square form, the insert offers multiple indexing positions, which extend total service life and lower the tooling cost per machined component. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 150612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9215 wear resistance, a TRS chipbreaker for reliable chip control, and the robust 1.2 mm corner radius to maintain high productivity in medium-steel turning; order directly via Metav Werkzeuge or consult our application specialists for toolholder compatibility. SNMM 150612 T9215 — SNMM150612-TRS Tungaloy turning insert, CVD-coated carbide SNMM150612-TRS T9215 Tungaloy-Wendeplatte is an ISO-normed indexable insert designed for external and internal turning of medium steels, combining a CVD coating with a TRS chipbreaker for stable, productive machining SNMM150612-TRS geometry, ISO 150612 CVD-coated T9215 grade for medium steel TRS chipbreaker for stable chip control 1.2 mm corner radius for robust engagement Enhanced productivity through a durable CVD coating The SNMM150612-TRS indexable insert pairs a CVD-coated surface with a cemented carbide substrate to deliver sustained performance in medium-steel turning. The T9215 grade is engineered to provide a fine balance between wear resistance and fracture toughness, which translates into longer tool life under continuous and lightly interrupted cuts. For production environments aiming to reduce downtime, this means fewer insert changes and more consistent component quality, while the coating helps maintain edge integrity at elevated cutting temperatures. Geometry that secures process stability and chip control The square insert form, combined with the TRS chipbreaker, creates predictable chip formation and evacuation—essential for unattended cycles and automated turning centres. The 1.2 mm corner radius increases engagement strength at the cutting edge, improving surface finish and reducing vibration on less rigid setups. With a 0° relief angle and an included angle of 90°, the geometry suits typical turning operations where radial strength and repeatable edge performance are required, supporting efficient material removal without compromising dimensional control. System compatibility and practical handling in the workshop As an ISO-normed turning insert, compatibility with the holder is determined by form, relief angle, tolerance class, fastening method, size and thickness; this insert integrates into a standard system comprising a matching external holder or boring bar, seat/pad, and clamping screws. The cylindrical hole provides secure fastening and repeatable seating. Choosing the correct insert grade and chipbreaker for the workpiece and machining conditions reduces trial-and-error setup time and improves first-pass yields. For complex applications or mixed-material batches, consult technical documentation or seek guidance to match the SNMM150612-TRS with the optimal clamping and cutting parameters. Contact Metav Werkzeuge for application advice and to secure Tungaloy SNMM150612-TRS inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774094 Manufacturer SKU: TUN6774094 Model designation: SNMM150612-TRS Numbers Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 90° Special features Material: Cemented carbide Coating/grade: T9215 (CVD-coated) Chipbreaker: TRS Hole: cylindrical, with hole Shape: square Application: turning FAQ What materials is this insert best suited for? The SNMM150612-TRS with T9215 grade is optimised for medium steels; the CVD coating and carbide substrate provide a balance of wear resistance and toughness for productive turning operations. How does the TRS chipbreaker affect machining? The TRS chipbreaker on this insert controls chip formation to improve evacuation and reduce entanglement, which enhances process stability during continuous and lightly interrupted cuts. Is this an ISO‑compatible insert and how does that matter? Yes — the SNMM150612-TRS is ISO‑normed, so compatibility depends on matching the insert form, size, thickness and relief angle with the corresponding holder and clamping system for safe and repeatable mounting. Which toolholders are suitable for this insert? Suitable holders are those designed for SNMM‑type square inserts in the ISO 150612 family; choose a holder with the correct seat geometry, tolerance class and clamping for a secure fit and optimal cutting performance. What benefit does the 1.2 mm corner radius provide? A 1.2 mm radius increases edge strength and reduces chipping risk at the corner, improving surface finish and allowing slightly heavier depth of cut compared with smaller radii. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 150612 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade and a proven chipbreaker to maintain stable cutting under varying engagement conditions; the combination of ISO conformity, a 1.2 mm corner radius and 90° seating supports efficient medium-to-heavy Stahl turning operations. Order directly via Metav Werkzeuge or consult the team for application-specific guidance. SNMM150612-TRS T9225 SNMM turning insert — square ISO indexable insert, CVD-coated carbide, 90° seating SNMM150612-TRS T9225 is an ISO-standard square indexable insert designed for external and internal turning where robustness and reliable chip control are required CVD-coated carbide T9225 Universal for medium–heavy Stahl turning Square ISO insert, 90° seating 1.2 mm corner radius, TRS chipbreaker Reliable cutting performance for changing engagement conditions The CVD-coated T9225 grade combines toughness and wear resistance to meet the demands of medium-to-heavy Stahl machining. With a focus on maintaining productive metal removal when the cut is intermittently interrupted or engagement varies, this insert delivers consistent edge life and reduced tool change frequency. The TRS chipbreaker is optimised to produce predictable chips across a range of feeds and depths, improving process stability and lowering the risk of built-up edge. As an ISO-standardised component, the insert supports reproducible set-up by matching holder geometry, relief angle and clamping interfaces. Clear compatibility and mounting information to support quick set-up Compatibility with toolholders is determined by form, relief angle, tolerance classification, fastening, size and thickness. The SNMM150612-TRS fits square-seat holders with a 90° seating angle and a cylindrical-hole clamping arrangement, enabling straightforward replacement and secure fixation. The nominal 15 mm size and 6.35 mm plate thickness ensure mechanical stability in most standard turning holders; the 0° relief angle offers direct contact geometry for positive engagement. Having these defined parameters simplifies tool selection and reduces machine downtime during insert changes. Material grade and machining benefits explained for process planners The insert’s substrate of carbide with a CVD surface layer extends wear resistance while preserving edge toughness, which is particularly beneficial when working on alloyed or plain Stahl under fluctuating cutting conditions. The 1.2 mm corner radius balances strength and finish capability: it improves edge lifetime on interrupted cuts while still allowing fine surface quality with appropriate feeds. For practical use, pair the insert with a matching holder and select cutting data that reflects workpiece hardness and required surface finish; the robust grade supports conservative adjustments towards higher metal removal rates when process stability is confirmed. Contact Metav Werkzeuge for tailored application advice, availability and recommended holder pairings; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks Technical data Name / designation: SNMM150612-TRS T9225 Tungaloy indexable insert Manufacturer article number: 6781332 Manufacturer SKU: TUN6781332 SKU: 6781332-Tungaloy Facts Plate size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Seating angle: 90° Special features Material: carbide substrate Coating: CVD coating Grade: T9225 (robust universal grade) Chipbreaker: TRS Plate shape: square Hole: cylindrical hole Application: external and internal turning Series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The SNMM150612-TRS T9225 insert is specified for robust universal use and is suitable for machining a wide range of Stahl grades, particularly in medium-to-heavy turning operations. How does the TRS chipbreaker affect performance? The TRS chipbreaker on this Tungaloy insert promotes controlled chip formation and evacuation, improving process stability and reducing the risk of entanglement in varied engagement scenarios. Which holders are compatible with this ISO insert? Compatibility is governed by the insert form, relief angle, tolerance class, fastening method, size and thickness; the SNMM150612-TRS is intended for square-seat holders with a 90° seating and a cylindrical-hole clamping arrangement. What cutting edge protection does the coating provide? The CVD coating enhances wear resistance while maintaining edge toughness, helping to extend tool life during medium-to-heavy cutting and under intermittent cutting conditions. Is the corner radius suitable for finishing passes? The 1.2 mm corner radius offers a compromise between strength and surface finish; it is robust for heavy engagement and can still deliver acceptable surface quality with adjusted feed rates and finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 150612 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T9235) for extended tool life and the TRS chipbreaker designed for interrupted and unstable cuts; the ISO conformity and square 15 mm format ensure fast indexing and broad holder compatibility. Order the SNMM150612-TRS T9235 Tungaloy insert directly via (Metav Werkzeuge) or ask our consultants if needed. SNMM 150612 T9235 — Tungaloy ISO turning insert, CVD-coated carbide, TRS chipbreaker The SNMM150612-TRS T9235 Tungaloy insert is an ISO‑standard turning insert for external and internal turning, engineered for steel machining under unstable or interrupted cutting conditions. CVD-coated carbide for wear resistance TRS chipbreaker for interrupted cuts Square 15 mm format with cylindrical hole ISO‑standard insert for flexible holder compatibility Consistent cutting performance with a tough CVD grade The combination of CVD-coated carbide and the T9235 grade provides a balance between toughness and wear resistance that suits low cutting speeds and unstable conditions. In practice this means more reliable performance during intermittent engagement and when vibration or component deflection occur. The TRS chipbreaker controls chip formation for medium to heavy cuts, reducing risk of re-cutting and helping to maintain a steady surface finish. The result is predictable machining behaviour and fewer tool changes, which supports smoother production planning. Geometry that reduces setup time and simplifies indexing Designed as a square 15 mm insert with a 1.2 mm corner radius and a 90° form, the geometry facilitates rapid indexing and repeatable seating in standard ISO holders. The central cylindrical hole and defined 0° relief angle ensure secure clamping and consistent seat contact, so set-up is straightforward and repeatability is high. Clear dimensioning and ISO conformity allow selection of compatible holders based on form, clearance, tolerance class, fastening and thickness—factors that determine proper fit and clamping force. Application guidance and machining advantages Intended primarily for turning of steel, the insert performs best when paired with a holder and cutting parameters matched to the workpiece stability and material condition. The SNMM150612-TRS nomenclature identifies the plate geometry, chipbreaker and grade, which helps in selecting the correct replacement or alternative. The CVD coating is a thin, hard barrier that slows abrasive wear while the substrate carbide provides impact resistance; together they lengthen useful life under interrupted cutting. For shops aiming to reduce downtime and maintain surface quality, this combination delivers a cost‑effective compromise between productivity and tool life. Contact Metav Werkzeuge for application advice on the Tungaloy SNMM150612-TRS and to discuss holder compatibility: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6786065 SKU: 6786065-Tungaloy Manufacturer SKU: TUN6786065 Article designation: SNMM150612-TRS T9235 Tungaloy-Wendeplatte Core dimensions Shape: square Size: 15 mm Thickness: 6.35 mm Corner radius: 1.2 mm Angle: 90° Hole: with hole (cylindrical) Free angle: 0° Materials & features Material: carbide Coating / grade: T9235 (CVD-coated) Chipbreaker: TRS ISO series: ISO turning inserts Application: turning (external and internal) FAQ What materials is this insert suited for? The Tungaloy SNMM150612-TRS in grade T9235 is formulated for machining steel under lower cutting speeds and in conditions with interrupted cuts. How does the TRS chipbreaker affect machining? The TRS chipbreaker improves chip control during medium and interrupted cuts, helping to avoid long swarf and to maintain consistent surface quality with the SNMM150612-TRS insert. Which holder characteristics determine compatibility? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; select an ISO‑compatible holder that matches these criteria for the SNMM150612-TRS. What does the CVD coating deliver in daily use? A CVD-coated carbide insert such as the T9235 grade provides a hard surface layer that resists abrasive wear while the substrate offers toughness, increasing tool life in unstable cutting situations. Can this insert be used for internal turning as well as external turning? Yes, the geometry and ISO conformity of the SNMM150612-TRS make it suitable for both external and internal turning operations when paired with an appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 150616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of T9215 CVD-coated carbide and a 1.6 mm corner radius for reliable medium-steel turning and consistent chip control; request availability and application advice via Metav Werkzeuge for smooth integration into production. SNMM150616 T9215 SNMM 150616 turning insert – square, 1.6 mm radius, Tungaloy The SNMM150616 T9215 is an ISO-standard square turning insert designed for medium-steel machining, offering a one-sided chipbreaker and a CVD-coated carbide grade for stable, productive turning. ISO-standard square insert for turning T9215 CVD-coated carbide grade 1.6 mm corner radius for versatility One-sided chipbreaker for reliable chips Consistent productivity for medium-steel turning The insert delivers predictable cutting performance in continuous to lightly interrupted operations thanks to the T9215 grade, a CVD-coated carbide formulation developed for the middle range of steel machining. The combination of high wear resistance and good fracture toughness supports longer tool life and consistent component quality, which translates into fewer tool changes and higher net machining time. For shops focusing on repeatable batch production, this indexable insert helps maintain throughput while preserving surface integrity. Reduced downtime through controlled wear and chip formation A stable coating system and the engineered substrate hardness ensure that flank and crater wear progress predictably, enabling planned tool-change intervals rather than reactive replacement. The one-sided chipbreaker promotes manageable chip shapes and reduces the risk of chip entanglement at the tool edge, improving operator safety and reducing secondary operations. These technical characteristics support cost-efficiency by lowering unplanned stoppages and simplifying post-process handling. Secure clamping and ISO compatibility for flexible toolholding As an ISO-compliant product, the insert's compatibility with holders is determined by form, relief angle, tolerance class, attachment method, size and thickness. The square-form design with a cylindrical hole and a 0° relief angle provides secure fastening in standard external holders and boring bars, while the 90° lead angle suits a range of turning tasks from shoulder work to general profiling. This interchangeability simplifies stocking and enables rapid setup across multiple machines. Practical guidance on selecting grade and chipbreaker Choose the T9215 grade where a balance between wear resistance and toughness is required; it is particularly suited for medium-steel alloys and mixed production runs. The 1.6 mm corner radius offers a compromise between edge strength and surface finish, making it appropriate for both roughing and semi-finishing passes. Where stability is limited or interrupted cuts are frequent, select a geometry and holder combination that increases support and reduces overhang to maintain edge life and process reliability. For tailored advice on integrating the Tungaloy SNMM150616 T9215 turning insert into production, including availability and application-specific recommendations, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774095 Manufacturer SKU: TUN6774095 Brand SKU: 6774095-Tungaloy Numbers / Core technical data Size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Lead angle: 90° Designs / Special features Grade: T9215 Coating: CVD-coated carbide Shape: square Hole: with cylindrical hole Chipbreaker: one-sided Application: turning FAQ What materials is this insert best suited for? The Tungaloy SNMM150616 T9215 turning insert (SKU TUN6774095) is optimised for medium-steel machining and performs well in continuous to lightly interrupted cuts. What does the 1.6 mm corner radius affect? A 1.6 mm corner radius increases edge strength for robust cutting while still enabling acceptable surface finishes during semi-finishing and roughing passes. How is the insert secured in a holder? The square-form insert uses a cylindrical hole for clamping; compatibility depends on form, relief angle, tolerance class, attachment, size and thickness as per ISO standards. Is the grade suitable for interrupted cuts? The T9215 grade combines wear resistance with fracture toughness and is suitable for continuous work and light interruptions; for heavy interruptions, more robust geometries or stiffer setups are recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 150616 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9225 grade and the square 90° geometry with a 1.6 mm corner radius for robust medium-to-heavy steel turning; order the SNMM150616 T9225 Tungaloy insert directly via Metav Werkzeuge or contact the consultants for compatibility advice. SNMM150616 T9225 SNMM indexable turning insert for turning — CVD-coated carbide, 90° square, 1.6 mm corner radius (Tungaloy) SNMM150616 T9225 is an ISO-format indexable insert for turning, engineered for stable, medium-to-heavy steel machining where interrupted cuts demand additional toughness. CVD-coated carbide T9225 grade Robust universal grade for medium to heavy steel Square 90° insert with 1.6 mm corner radius Cylindrical-hole clamping, one-sided chipbreaker Consistent tool life and productivity in demanding turning operations The CVD coating and the T9225 grade combine wear resistance with toughness to deliver reliable tool life under varying engagement conditions. In practical terms, the coated carbide substrate reduces flank wear and maintains cutting-edge integrity during longer cycles, which supports higher productivity in batch production. The ISO format and standardised dimensions ensure predictable replacement intervals and simplify inventory management for production shops. Stable clamping and predictable machining geometry for improved process control Designed with a cylindrical-hole mounting and a square 90° profile, the insert provides secure clamping and consistent seat location in compatible holders. The defined geometry—15 mm size, 6.35 mm thickness and 1.6 mm corner radius—enables stable cutting forces and repeatable results, which contributes to dimensional consistency on external and internal turning tasks. Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; selecting the correct holder prevents movement and vibration during cuts. Coating and grade explained: why CVD-coated T9225 matters The CVD-coated carbide specification refers to a chemical vapour deposition layer that improves surface hardness and thermal resistance while preserving core toughness of the substrate. The T9225 formulation is a robust universal grade intended for medium-to-heavy steel machining where slightly interrupted cuts occur; it balances wear resistance and fracture resistance so that edge stability is preserved when cutting conditions change. For less experienced users, the term means the insert is less sensitive to variable feeds and impacts than purely hard grades. Geometry and chip control designed for practical workshop use A single-sided chipbreaker and the insert’s geometry are optimised to manage chips and heat generation during turning. The 0° rake angle and defined chipbreaker form support controlled chip formation in common steel applications, reducing the need for frequent manual chip handling and lowering the risk of chip-related surface damage. For many turning setups, this leads to fewer interruptions and a smoother production flow without experimental trial-and-error. For machining scenarios that require a balance of wear resistance and toughness, the Tungaloy SNMM150616 T9225 insert is recommended; contact Metav Werkzeuge for product availability and technical matching to existing holders via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6781301 Manufacturer SKU: TUN6781301 SKU: 6781301-Tungaloy ISO designation: 150616 Internal designation: SNMM150616 Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Angle: 90° Rake angle: 0° Special features Material: carbide Coating/grade: CVD-coated, T9225 Shape: square Hole: with hole (cylindrical) Chipbreaker: single-sided Application: turning ISO-format insert FAQ What materials is this insert suitable for? The SNMM150616 T9225 insert is formulated for steel machining; the T9225 grade provides the toughness and wear resistance needed for medium-to-heavy cutting conditions. How does the T9225 CVD coating affect performance? The CVD-coated T9225 grade increases surface hardness and thermal resistance while retaining core toughness, so the insert resists flank wear and edge chipping during demanding turning operations. Which holder features are required for correct compatibility? Compatibility is determined by holder form, clearance angle, tolerance class, clamping method, size and thickness; the SNMM150616 format requires a matching ISO turning holder with a cylindrical-hole clamp. Is the chip control suitable for interrupted cuts? Yes, the single-sided chipbreaker and robust T9225 grade are designed to manage chips and provide edge stability during interrupted or variable engagement conditions. What are the dimensional references to check before ordering? Check the insert size (15 mm), thickness (6.35 mm), corner radius (1.6 mm) and the 90° geometry to ensure fit and intended cutting behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com