SNMM 150616 T9225 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade engineered for robust medium to heavy steel turning, combined with ISO SNMM150616 geometry and a 1.6 mm corner radius for secure edge strength; order directly via Metav Werkzeuge or consult their specialists for application advice. SNMM150616 T9225 – ISO indexable turning insert for turning, CVD-coated carbide by Tungaloy The SNMM150616 T9225 is an ISO‑standard indexable turning insert made for reliable external and internal turning in steel, offering a 90° approach and a 1.6 mm corner radius for enhanced edge stability. CVD-coated carbide for robust steel machining ISO SNMM150616 geometry for holder compatibility 1.6 mm corner radius for sturdy edge strength Cylindrical hole clamping, 6.35 mm thickness High cutting performance for medium to heavy steel The combination of a CVD-coated surface and a carbide substrate delivers wear resistance and thermal stability that translate into longer in‑service life under demanding conditions. Designed as a robust universal grade, the insert copes well with varying engagement and slightly interrupted cuts; the 90° approach gives versatile cutting geometry for general turning operations while the 1.6 mm corner radius increases edge security against chipping. The technical composition reduces flank wear and supports consistent metal removal rates, which helps maintain cycle times and surface quality in production environments. System compatibility that simplifies setup and tool choice As an ISO component, ISO SNMM150616 inserts rely on defined geometries for secure fitment: form, clearance angle, tolerance class, clamping method, size and thickness determine holder compatibility. The square 15 mm format with a cylindrical hole and 6.35 mm plate thickness fits standard SNMM‑style external holders and boring bars when the mating dimensions match. Selecting an appropriate chipbreaker and grade according to workpiece stability and machining strategy will optimise performance; Metav Werkzeuge’s technical consultants can advise on holder selection and chipbreaker pairing to ensure correct assembly and secure clamping for stable cutting. Durable grade and controlled chip formation for dependable results The T9225 specification combines a wear‑resistant coating with a tougher substrate to balance tool life and fracture resistance, promoting stable chip formation across a broad range of steel alloys. For workshops facing variable cutting conditions, this compromise reduces the frequency of insert changes and supports reproducible finishes. The single‑sided chipbreaker geometry offers predictable chip flow in both external and internal turning tasks. Overall, the design aims to deliver productive cutting, reduced downtime and repeatable workpiece quality during serial production and jobbing alike. Contact Metav Werkzeuge for tailored application support on this Tungaloy T9225 insert and to discuss supply options or sample availability — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6781333 Manufacturer SKU: TUN6781333 SKU: 6781333-Tungaloy Model series: ISO turning inserts Facts ISO designation: 150616 Corner radius: 1.6 mm Approach angle: 90° Relief angle: 0° Plate size: 15 mm Plate thickness: 6.35 mm Shape: square Hole style: cylindrical hole Special features Grade/coating: T9225 (CVD-coated carbide) Chipbreaker: single-sided Typical application: external and internal turning Suitable for medium to heavy steel machining Compatibility: ISO insert system, fits holders with matching geometry FAQ Is this insert compatible with standard SNMM holders? Yes. The SNMM150616 insert follows ISO geometry; compatibility depends on matching form, clearance angle, tolerance class, clamping method, size and thickness to the holder. Which materials is the grade suited for? The T9225 grade is formulated for medium to heavy steel machining and performs well under slightly interrupted cuts where additional toughness is required. What is the purpose of the 1.6 mm corner radius? A 1.6 mm corner radius increases edge strength and reduces susceptibility to chipping, making it appropriate for heavier cuts and applications where edge robustness is important. Does the insert feature a clamping hole and what is its style? Yes. The plate is supplied with a cylindrical hole for mechanical clamping and a plate thickness of 6.35 mm to match standard clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 150616 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade built for interrupted and unstable cuts, combined with a 1.6 mm corner radius and ISO compatibility for straightforward holder selection; order via Metav Werkzeuge or consult our technical team for holder pairing and process recommendations. SNMM 150616 T9235 — ISO square turning insert, CVD-coated carbide, 90° geometry, Tungaloy The SNMM150616 T9235 is an ISO-standard square indexable insert for turning applications, engineered for steel machining where interrupted cuts or limited rigidity demand a tough grade and predictable chip control. CVD-coated carbide for reliable cutting 1.6 mm corner radius for robust engagement Square ISO insert, 15 mm size, 6.35 mm thickness Cylindrical hole with single-sided chipbreaker Maintain cutting stability in interrupted and unstable cuts The insert's T9235 grade is a CVD-coated carbide designed to resist chipping under adverse conditions. In workshops where setup rigidity varies, choosing a tougher grade reduces the risk of premature breakage and unplanned tool changes, which keeps cycle times consistent. The combination of a 1.6 mm corner radius and the square geometry spreads cutting forces across a larger edge length, improving engagement stability and reducing the likelihood of edge collapse during interrupted cuts. This translates into fewer stoppages and more predictable component quality for medium-duty turning operations. Optimised performance specifically for steel machining This grade performs best in steel machining at moderate cutting speeds, where thermal stability and resistance to crater wear matter more than maximum speed. The CVD-coated carbide layer provides a hard, wear-resistant surface that slows flank and crater wear while maintaining a stable cutting edge. The single-sided chipbreaker is tuned to produce manageable chips during typical external and internal turning operations, easing chip evacuation and reducing surface disturbance. These properties support a cost-effective balance of durability and surface finish when machining a broad range of steel grades. Simple integration into ISO tool systems for quick changeovers Compatibility is ISO-based, so selection of the correct clamping and holder geometry is straightforward: match the form, clearance angle (0°), tolerance class, fixing method, size (15 mm) and thickness (6.35 mm) to the holder. The insert’s cylindrical hole ensures secure seating on standard shims and screws, and the square outline with a 90° included angle makes it suitable for a variety of external and internal turning positions. A system consisting of the insert, a suitable external holder or boring bar, the correct shim/clamping set and replacement screws delivers quick indexability and reduced downtime. Long tool life and consistent results for productive turning By favouring a tougher grade over a high-speed-optimised alternative, this insert prioritises edge security and repeatable performance, especially under interrupted cuts or marginal setups. The robust geometry and coating combination helps extend the intervals between tool changes, improving overall tool-room economy. For users seeking repeatable dimensional accuracy and fewer remakes, the controlled wear pattern of this grade supports longer runs with predictable maintenance intervals. The system-oriented approach — insert plus compatible holder and clamping parts — reduces variability and supports stable process windows across batches. For reliable steel turning with the Tungaloy SNMM150616 T9235 grade, contact Metav Werkzeuge for tailored holder recommendations and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6786066 Manufacturer SKU: TUN6786066 SKU: 6786066-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO code: 150616 Facts Size: 15 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Insert included angle: 90° Special features Material: Hartmetall (cemented carbide) Coating: CVD-coated carbide Grade: T9235 Shape: square Hole: with cylindrical hole Chipbreaker: single-sided Typical application: Turning FAQ What materials is this insert best suited for? The SNMM150616 T9235 insert is optimised for machining steel, offering robust performance in interrupted and lower-speed operations. How does the T9235 grade affect tool life? The T9235 grade uses a tough CVD-coated carbide that improves resistance to chipping under unstable conditions, extending usable edge life in many turning scenarios. Is this insert compatible with standard ISO holders? Yes — the insert follows ISO geometry; match holder form, clearance angle (0°), thickness (6.35 mm) and size (15 mm) for correct fit and clamping. What chip control can be expected from the single-sided chipbreaker? The single-sided chipbreaker produces controllable chips in typical external and internal turning, aiding evacuation and protecting the surface finish. Which spare parts are recommended for a complete tool system? A matching external holder or boring bar, the correct shim/clamping set and replacement screws complete a secure and serviceable system for this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190612 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO-conform SNMM190612 geometry and a compact 1.2 mm corner radius for stable, high-productivity turning operations; order directly via Metav Werkzeuge or consult our specialists for application matching. SNMM190612 T9215 turning insert – square ISO insert for turning (Tungaloy) The SNMM190612 T9215 is a square ISO turning insert designed for external and internal turning, combining a CVD-coated carbide grade with a single-sided chipbreaker for medium steel machining. CVD-coated carbide for wear resistance ISO SNMM 190612 square geometry 1.2 mm corner radius for fine finishing Single-sided chipbreaker for controlled chips Higher throughput through a wear-resistant grade The CVD-coated carbide grade T9215 delivers a clear productivity advantage in medium steel machining by combining enhanced wear resistance with good fracture toughness. The coating reduces flank and crater wear under continuous and light interrupted cutting, which extends tool life and reduces downtime for tool changes. As a result, cycle times are shortened while component tolerances remain consistent, providing a measurable improvement in process economy and uptime when running serial production or long batch cycles. Accurate geometry for consistent dimensional control and surface quality The square, 90° geometry and the 1.2 mm corner radius provide both stability and the ability to achieve tighter surface finish specifications on turned parts. The insert’s ISO form ensures repeatable positioning in compatible holders, and the 0° relief angle supports predictable cutting forces at the tool edge. These geometric parameters are chosen to lower vibration risk where rigidity is limited, giving a reliable balance between material removal rate and surface integrity for finishing and semi-finishing operations. System compatibility and practical handling for workshop integration The indexable design features a cylindrical hole and a plate thickness of 6.35 mm, enabling secure fixation and straightforward replacement in standard holders. The single-sided chipbreaker is optimised for chip control in continuous to lightly interrupted cuts and pairs well with stable setups. Compatibility with a given holder is determined by form, relief angle, tolerance grade, attachment and plate size/thickness, so inserts are best selected as part of a matched system to achieve predictable performance and efficient tool management. For an application-specific recommendation or to reserve production quantities of the Tungaloy SNMM190612 T9215 turning insert, contact Metav Werkzeuge for fast technical guidance and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6773852 Manufacturer SKU: TUN6773852 SKU: 6773852-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Coating/grade: T9215 (CVD-coated carbide) Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 90° Hole: with cylindrical hole Special features Square plate (SNMM form) Single-sided chipbreaker ISO designation SNMM190612 For external and internal turning Grade T9215 targeted at medium steel Compatibility depends on form, relief angle, tolerance, attachment, size and thickness FAQ Which materials are best suited to this insert? The SNMM190612 T9215 turning insert is formulated for medium steel machining; the T9215 CVD-coated carbide grade balances wear resistance and toughness for continuous and light interrupted cuts in steel. Is this insert compatible with standard ISO SNMM holders? Yes, the insert follows the ISO SNMM190612 form; compatibility is achieved when the holder matches the form, relief angle, tolerance class, fastening method, size and thickness. What finish can be expected with a 1.2 mm corner radius? A 1.2 mm corner radius helps achieve fine surface finishes while maintaining edge strength, making the insert suitable for finishing and semi-finishing passes on turned components. Does the single-sided chipbreaker limit re-indexing? A single-sided chipbreaker typically offers one primary cutting orientation; when clamped correctly, it provides consistent chip control and repeatable cutting performance for the specified applications. What key data should be checked before integration into an existing tool system? Confirm holder compatibility (form and clamp), plate thickness (6.35 mm), hole style (cylindrical), relief angle (0°) and the required corner radius to ensure predictable assembly and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190612 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, a 1.2 mm corner radius and ISO compatibility for stable, productive steel turning; order the insert directly via Metav Werkzeuge or consult the team for application support. SNMM 190612 T9225 — Tungaloy turning insert for medium to heavy steel turning The SNMM190612 T9225 is an ISO-standard turning insert designed for robust outside and inside turning, offering a universal grade for variable cutting conditions. CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel Square ISO insert with 90° cutting angle 1.2 mm corner radius, cylindrical hole Predictable performance under varying cutting conditions The CVD-coated T9225 grade combines wear resistance with increased toughness, making it well suited to medium to heavy steel turning where cuts can be interrupted or variable. The coating increases resistance to abrasive wear, while the underlying carbide substrate preserves edge strength; together this lowers the risk of edge chipping and extends useful life. For production-oriented shops, the result is fewer tool changes and more consistent cycle times, supporting higher throughput without sacrificing process reliability. Simple selection and secure clamping for quicker setups As an ISO-standard insert, compatibility with toolholders is determined by form, relief angle, tolerance class, clamping and thickness. The square geometry and 90° cutting angle provide predictable cutting forces and straightforward indexing, while the 6.35 mm plate thickness and cylindrical hole ensure secure seating in standard holders. Clear conformity to ISO dimensions reduces setup time and simplifies inventory management, enabling a faster transition from job planning to cut. Shop-floor advantages: chip control, strength and finish The single-sided chipbreaker and the 1.2 mm corner radius balance chip control and edge robustness. The chipformer manages swarf in a broad range of turning conditions, supporting stable chip formation and improved surface quality on external and internal contours. The relatively generous corner radius increases resistance to mechanical shock and improves tool life under heavier feeds, while the insert’s design supports repeatable results across batch runs. Application scope and practical recommendations Intended primarily for turning of steel, this insert performs best when paired with a holder chosen for rigidity and correct relief geometry; select the chipbreaker and grade to match workpiece stability and cutting strategy. For less stable setups, reduce depth of cut and increase feed modestly to preserve edge life; for robust setups, modest increases in cutting speed are feasible thanks to the coating and carbide combination. The insert’s universal character makes it a practical choice where job mixes vary and reliable, repeatable performance is required. For reliable, productive steel turning with Tungaloy quality, contact Metav Werkzeuge for application advice and fast supply of SNMM190612 T9225 inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6780696 Manufacturer: Tungaloy Manufacturer SKU: TUN6780696 Model series: ISO turning inserts SKU: 6780696-Tungaloy Data Plate size: 19 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Cutting angle: 90° Relief (free) angle: 0° Special features CVD-coated carbide (T9225) Square plate form Cylindrical hole Single-sided chipbreaker ISO designation SNMM190612 Designed for turning (outside and inside) Robust universal grade for medium–heavy steel FAQ What steels is this insert suitable for? The SNMM190612 T9225 insert is intended for medium to heavy steel turning; the CVD coating and carbide substrate provide wear resistance and toughness for variable engagement. How does the corner radius affect performance? A 1.2 mm corner radius increases edge strength and improves surface finish under heavier feeds; it is beneficial for roughing and mixed-operation work where robustness is required. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; use an ISO-compatible square insert holder matched to the SNMM190612 dimensions for secure mounting. Is the insert suitable for interrupted cuts? Yes, the T9225 grade is formulated for greater toughness, making it suitable for operations with changing engagement or light interruptions. What chip control can be expected from this insert? The single-sided chipbreaker promotes stable chip formation across a range of feeds, supporting consistent surface quality and manageable swarf evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190612 T9225 Wendeplatten - Tungaloy
Take advantage of the T9225 grade and ISO SNMM190612 geometry for stable, productive turning in medium to heavy steel work. The robust CVD-coated carbide construction and 1.2 mm corner radius deliver reliable chip control and extended tool life, while Metav Werkzeuge is available for ordering or consultation. SNMM 190612 T9225 turning insert by Tungaloy — square ISO insert, 90° geometry, carbide CVD-coated The SNMM190612 T9225 is an ISO‑compliant square indexable insert designed for external and internal turning where toughness and consistent chip formation are required ISO SNMM190612 form, square, 90° geometry CVD-coated carbide grade T9225 for steel 1.2 mm corner radius, single-sided chipbreaker Cylindrical hole and 6.35 mm plate thickness Reliable performance for medium to heavy steel turning The T9225 CVD‑coated carbide grade provides a balanced combination of wear resistance and toughness suited to medium to heavy steel machining. As an ISO‑standard SNMM insert, it ensures predictable engagement behaviour in varying cut conditions and tolerates slight interruptions without premature chipping. The coating reduces flank and crater wear, which in turn supports longer index intervals and more consistent component quality. This leads to measurable process improvements through fewer tool changes and steadier cycle times. Design features that deliver rigidity and consistent surface finish A square plate with a 90° lead angle and 1.2 mm corner radius offers a versatile geometry for facing and shoulder turning, producing robust cutting edges and good support in the holder. The 6.35 mm plate thickness together with the cylindrical hole and defined clamping interface increases stiffness in the tool assembly, reducing vibration and enhancing repeatability. The single-sided chipbreaker is optimised for steel applications to encourage stable chip formation and controlled evacuation, which benefits surface finish and downstream handling. Practical application advice and system considerations for shops For effective integration, the insert should be used with an ISO‑compatible external holder or boring bar; compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness. The insert forms part of a typical system assembly that includes the indexable plate, a matching holder, a shim/clamp set and spare fixing screws. Selecting the correct chipbreaker and grade combination is crucial when facing variable depths of cut or interrupted feeds: the Tungaloy universal grade performs reliably across such conditions, making it a practical choice where process stability and predictable tool life are priorities. Contact Metav Werkzeuge for tailored cutting data, availability of genuine Tungaloy SNMM190612 inserts and application advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6780804 Manufacturer SKU: TUN6780804 Seller SKU: 6780804-Tungaloy Designation: SNMM190612 Manufacturer article number: 6780804 Numbers / Core technical data Corner radius: 1.2 mm Plate thickness: 6.35 mm Inscribed circle / size: 19 mm Clearance angle: 0° Lead angle: 90° Special features / Versions CVD-coated carbide grade T9225 Square insert, single-sided chipbreaker Cylindrical hole for positive clamping ISO-compliant turning insert Suitable for external and internal turning FAQ What holder compatibility is required for this insert? Holder compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the SNMM190612 T9225 insert fits ISO‑compliant holders matching those specifications. Which materials is this grade intended for? The T9225 grade is a robust universal CVD‑coated carbide developed for medium to heavy steel machining, offering stable chip formation under variable engagement conditions. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength for shoulder and face turning, improving resistance to chipping and providing a balance between surface finish and cutting edge robustness for the SNMM190612 insert. Does this insert require a special chipbreaker selection? Choose the chipbreaker according to workpiece material, depth of cut and stability of the set‑up; the single-sided chipbreaker on the SNMM190612 T9225 is optimised for steel and interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190612 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, a 1.2 mm corner radius and ISO compatibility for consistent performance in medium to heavy steel turning. Order directly via Metav Werkzeuge or ask the consultants for application-specific advice. SNMM 190612 T9225 indexable turning insert — 90° square insert by Tungaloy, CVD-coated carbide, 1.2 mm radius SNMM190612 T9225 is an ISO-designated indexable turning insert for general turning applications, suited to medium and heavy steel machining and designed for holders matching form, relief angle and tolerance. SNMM190612 ISO indexable insert CVD-coated carbide for toughness 1.2 mm corner radius for strength Single-sided chipbreaker, cylindrical hole Consistent performance under variable cutting conditions The T9225 grade combines a CVD-coated carbide substrate with a formulation tuned for demanding turning tasks, delivering a balance of hardness and toughness that benefits intermittent cuts and fluctuating engagement. As a robust universal grade, it is engineered for medium to heavy steel machining where edge strength matters; the coating improves wear resistance and extends the usable life of the insert. For production environments where reliability and predictable tool life are priorities, this material-choice reduces tool change frequency and supports steady cycle times. Clear compatibility and secure clamping for reliable set-ups Designed to the ISO designation SNMM190612, the insert’s geometry — a square plate with a cylindrical hole and a 0° relief angle — ensures straightforward matching to ISO-style holders and boring bars. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; specifying the ISO 190612 code simplifies holder selection and reduces set-up uncertainty. The cylindrical hole enables positive clamping with the appropriate screw and underlay, improving repeatability in serial production and easing tool changes for workshop staff. Operational advantages: chip control and economical productivity The single-sided chipbreaker integrated on the insert promotes effective chip formation and evacuation during turning, which lowers built-up edge risk and helps maintain stable cutting conditions. The 1.2 mm corner radius increases edge robustness and resists chipping under heavier feeds, while the 90° orientation provides general-purpose strength for external and internal turning passes. Together, these features contribute to longer in-cycle performance and fewer interruptions for insert replacement, supporting a more productive machining process. For tailored recommendations on Tungaloy turning inserts such as the SNMM190612 T9225 and to arrange prompt supply via Metav Werkzeuge contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780955 SKU: 6780955-Tungaloy Manufacturer SKU: TUN6780955 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Insert angle: 90° Hole: cylindrical (with hole) Special features Material: carbide Coating: CVD Grade: T9225 (robust universal for medium–heavy steel) Chipbreaker: single-sided Plate form: square FAQ Which materials is this insert suitable for? The SNMM190612 T9225 from Tungaloy is specified as a robust universal grade intended primarily for medium to heavy steel machining and performs well under slightly interrupted cuts. What is the corner radius and why does it matter? The insert has a 1.2 mm corner radius, which enhances edge strength and reduces the likelihood of chipping when machining with higher feeds or variable engagement. How is the insert secured in a holder? This ISO-designated insert features a cylindrical hole for positive clamping; compatibility with a holder is determined by form, relief angle, tolerance class, fastening type, size and thickness. What coating and substrate does the insert use? The SNMM190612 T9225 insert uses a CVD-coated carbide substrate, combining wear resistance from the coating with the toughness of the carbide base. Is the chipbreaker suitable for general turning operations? Yes — the single-sided chipbreaker on the SNMM190612 T9225 is optimised for chip control in turning, improving evacuation and helping to maintain consistent cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190612 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough CVD-coated carbide grade (T9235), a precise corner radius of 1.2 mm, and ISO compatibility to keep turning operations productive and reliable. The design supports interrupted cuts and unstable conditions while reducing insert changes and rework. Order the SNMM190612 T9235 indexable turning insert directly via Metav Werkzeuge or consult the Metav team for application guidance. SNMM 190612 T9235 – ISO SNMM190612 indexable turning insert for turning by Tungaloy The SNMM190612 T9235 is an ISO-format indexable insert for external and internal turning, engineered for machining steel under interrupted or unstable conditions where a tough, CVD-coated carbide is required. CVD-coated carbide for tough steels ISO 190612 form, 6.35 mm thickness 1.2 mm corner radius for repeatable geometry Cylindrical hole for secure clamping Consistent chip control with a tough, CVD-coated grade The combination of CVD-coated surface and carbide substrate in grade T9235 delivers increased toughness compared with harder, more brittle grades. This makes the insert particularly suited to machining steel at reduced cutting speeds and in situations with broken or interrupted cuts. The coating improves wear resistance while the substrate maintains edge integrity, which together reduce the frequency of tool changes and lower the risk of catastrophic edge failure. For production lines with variable stability or frequent interruptions, this translates into fewer stoppages and a more stable machining process. ISO 190612 geometry for reliable clamping and repeatability The insert’s ISO 190612 designation and square form are industry-standard dimensions that simplify tool management and holder compatibility. The cylindrical hole and the 0° clearance angle ensure secure clamping and consistent seating in appropriate holders. With a plate thickness of 6.35 mm and a corner radius of 1.2 mm, the insert balances strength and profile control: the radius supports robust edge life while still permitting good surface finish on turned components. The 90° included angle gives predictable cutting behaviour for facing and shoulder operations, aiding dimensional consistency across batches. System-level benefits that reduce operating costs Used as part of a complete ISO insert system—appropriate holder, clamping kit and replacement screws—the insert supports straightforward inventory management and quick index changes. The single-sided chipbreaker design assists in reliable chip formation and evacuation during turning, reducing the likelihood of built-up edge and improving surface quality. Because the grade is chosen for toughness, it performs well where high impact loads occur, offering a lower total cost of ownership through improved tool life and fewer scrap parts. Compatibility is determined by insert form, clearance angle, tolerance class, clamping and thickness, enabling predictable integration into existing tool setups. For procurement advice or application support for the Tungaloy SNMM190612 T9235 indexable turning insert, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and stock information Technical data Article number: 6786057-Tungaloy Manufacturer article number: 6786057 Manufacturer SKU: TUN6786057 Brand: Tungaloy Measurements Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Included angle: 90° Clearance angle: 0° Plate form: square Special features ISO turning inserts series ISO designation: SNMM190612 Grade/coating: T9235, CVD-coated carbide Chipbreaker: single-sided Hole: with cylindrical hole Application: turning, external and internal Recommended use: steel, lower cutting speeds, unstable conditions, interrupted cuts FAQ What workpieces is this insert best suited for? The SNMM190612 T9235 indexable turning insert from Tungaloy is optimised for machining steel, especially where interrupted cuts or unstable conditions occur; the tough CVD-coated carbide grade provides robust edge life. How does the 1.2 mm corner radius affect results? A corner radius of 1.2 mm improves edge strength and wear resistance, helping the insert maintain dimensional stability and surface finish during turning operations with varying loads. Is the insert compatible with standard ISO holders? Yes. The SNMM190612 form follows ISO dimensions and the cylindrical hole supports secure clamping in compatible ISO holders when the correct tolerance class and clamping are observed. What advantages does the T9235 grade offer compared with harder grades? T9235 is a tougher, CVD-coated carbide grade designed for lower cutting speeds and interrupted cuts; it reduces chipping risk and extends service life in unstable machining conditions compared with more wear-focused, brittle grades. Can this insert be used for internal turning as well as external? Yes. The ISO SNMM190612 geometry and square form are suitable for both external and internal turning applications, provided the appropriate holder and cutting parameters are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, a 1.6 mm corner radius and robust 90° geometry to maintain steady productivity in medium-steel turning; order directly via Metav Werkzeuge or get tailored advice from our consultants for holder matching. SNMM190616 T9215 SNMM Turning Insert by Tungaloy — CVD-coated carbide, 90° square geometry SNMM190616 T9215 is an ISO-standard indexable turning insert designed for external and internal turning with a focus on medium-steel applications and continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 ISO SNMM190616 square insert, 90° geometry 1.6 mm corner radius for robust profiling Single-sided chipbreaker, cylindrical hole High productivity and reliable wear resistance for medium steels The CVD-coated T9215 grade delivers a balanced combination of wear resistance and fracture toughness, making this insert a dependable choice for continuous to lightly interrupted turning of medium-strength steels. The coating improves thermal stability at elevated cutting speeds, which supports longer tool life and fewer indexings. As a result, cycle times remain predictable and the number of part reworks is reduced, translating into a measurable improvement in process efficiency. Secure clamping and consistent geometry for precision turning With an ISO-compliant square form and 90° geometry, the insert provides repeatable seating in standard holders; the cylindrical hole and defined tolerance suite ensure secure fastening and minimal movement under load. The 1.6 mm corner radius offers a robust edge for profiling and shoulder work while helping to distribute cutting forces across the insert, reducing the likelihood of edge chipping. Choosing a compatible external holder and correct clamping torque completes the system for consistent dimensional accuracy. Practical application guidance and compatibility overview This indexable insert suits general-purpose turning where a balanced mix of productivity and durability is required. The 6.35 mm thickness and square plate size 19 mm combine to give sufficient cutting-edge strength for standard turning tasks, while the single-sided chipbreaker assists chip control for many steel grades. For optimal results, select holder geometry and feed parameters matched to the insert's geometry and the workpiece material; this reduces vibration, improves surface finish and extends the service life of the cutting edge. Contact Metav Werkzeuge for holder compatibility, cutting-parameter recommendations and to order Tungaloy inserts for reliable medium-steel machining Technical Data Article number: 6774096 Manufacturer SKU: TUN6774096 Brand: Tungaloy ISO designation: SNMM190616 Core data Corner radius: 1.6 mm Plate thickness: 6.35 mm Plate size: 19 mm Geometry angle: 90° Special features CVD-coated cemented carbide Single-sided chipbreaker Cylindrical mounting hole Square ISO turning insert Application: Turning (external and internal) FAQ What materials is this insert optimised for? The SNMM190616 T9215 insert is optimised for medium steels; the T9215 CVD coating offers good wear resistance and stability for continuous to slightly interrupted cuts. Is the insert compatible with standard ISO holders? Yes, the ISO-standard SNMM shape and the cylindrical hole permit use in compatible ISO external holders and boring bars when form, clearance angle and tolerance class match. Which cutting tasks benefit most from the 1.6 mm corner radius? A 1.6 mm corner radius is well suited to robust profiling and shoulder turning where increased edge strength and improved chip formation are required. Can this insert handle interrupted cuts? The insert tolerates slight interruptions; for heavily interrupted cuts a different geometry or tougher grade may be preferable to prevent edge damage. How does the single-sided chipbreaker influence chip control? The single-sided chipbreaker promotes consistent chip formation and evacuation in typical steel turning operations, helping to protect the cutting edge and the workpiece surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust edge strength and ISO compatibility for uninterrupted turning operations; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMM190616 T9215 SNMM 190616 T9215 turning insert by Tungaloy — square, 6.35 mm thick, 1.6 mm corner radius SNMM190616 T9215 is a square ISO turning insert designed for productive external and internal turning of medium steels, offering a CVD-coated carbide grade for high durability. ISO 190616 square insert CVD-coated carbide grade T9215 1.6 mm corner radius for strength Cylindrical hole for secure clamping Engineered for productive medium-steel turning The insert combines a CVD-coated carbide grade with a geometry optimised for machining medium steels, offering a balance between wear resistance and fracture toughness. The chosen grade is particularly suitable for continuous to lightly interrupted cuts, which helps to maintain a steady machining tempo and reduces unplanned tool changes. Thanks to the single-sided chipbreaker, chip formation is controlled for common turning operations, improving surface finish and process stability. This makes the insert a reliable choice where consistent cycle times and predictable tool life are priorities. Designed for straightforward mounting and system compatibility Compatibility with toolholders is determined by form, relief angle, tolerance class, fastening, size and thickness; this plate follows ISO standards to simplify selection. The square 19 mm format, 6.35 mm thickness and cylindrical hole provide secure clamping and repeatable positioning in standard external holders and boring bars. A well-matched holder, shim and clamping set reduce set-up time and vibration, supporting stable cutting conditions. Clear specification of form and dimensions enables straightforward integration into existing tool systems. Geometry and materials that extend service life and control chips The 1.6 mm corner radius and square shape yield a robust cutting edge that resists chipping in typical turning operations, while the 90° geometry supports general-purpose facing and turning tasks. The T9215 grade, a CVD-coated cemented carbide, is optimised for broad material coverage in steel machining and offers a compromise between economy and performance: it maintains edge stability under load and promotes consistent surface quality. Selecting the correct chipbreaker and matching the grade to cutting speed and feed will result in measurable productivity gains and predictable tool change intervals. For tailored recommendations on integrating Tungaloy turning inserts into production, contact Metav Werkzeuge for technical advice and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6773853 Manufacturer SKU: TUN6773853 SKU: 6773853-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMM190616 Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Angle: 90° Special features Material: Hartmetall (cemented carbide) Grade / coating: T9215 (CVD-coated) Shape: square Hole: with hole — cylindrical hole Chipbreaker: single-sided Application: Turning FAQ What materials is this insert best suited for? The Tungaloy SNMM190616 T9215 turning insert is primarily specified for medium steel machining; the T9215 CVD-coated grade combines wear resistance and edge strength for continuous to lightly interrupted cuts. Is the insert compatible with standard ISO holders? Compatibility follows ISO conventions: the insert’s form, relief angle, tolerance class, fastening, size (19 mm) and thickness (6.35 mm) determine fit; the cylindrical hole supports secure clamping in compatible external holders and boring bars. How does the corner radius affect performance? A 1.6 mm corner radius increases edge robustness and reduces the risk of chipping during general turning operations, promoting consistent surface finish and longer effective tool life for the specified applications. When should the single-sided chipbreaker be chosen? The single-sided chipbreaker is suitable when controlled chip flow and reliable evacuation are required in conventional turning of medium steels; pairing the chipbreaker with the correct feeds and speeds enhances process stability. What additional components are needed for a complete tool system? A complete system comprises the ISO turning insert, a compatible external holder or boring bar, a supporting shim/clamping set and replacement screws; matching all elements ensures repeatable seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190616 T9225 Wendeplatten - Tungaloy
Take advantage of robust cutting performance and consistent chip control for uninterrupted turning operations; the combination of a CVD-coated carbide grade and ISO-standard geometry ensures reliable tool life under varying engagement conditions. Order original inserts via Metav Werkzeuge or consult the team for application-specific setup. SNMM 190616 T9225 – ISO turning indexable insert, square 90°, Tungaloy SNMM190616 T9225 is an ISO-standard square indexable insert for turning applications, designed for medium to heavy steel machining where toughness and stable chip formation are required ISO-standard square insert with 90° geometry CVD-coated carbide for increased edge life 1.6 mm corner radius for robust cutting Single-sided chipbreaker for reliable chip control Productive cutting for mixed and demanding steel work The insert delivers a balance of durability and cut stability that improves throughput in mixed-production environments. With its CVD-coated carbide composition and T9225 grade, the geometry supports longer tool life under interrupted cuts and variable engagement, which reduces tool changes and downtime. This result is a more economical production flow while preserving surface quality on forged or machined components. Secure fit and straightforward integration into tool systems Designed as an ISO-standard component, the square insert integrates with common external holders and boring bars; compatibility is defined by form, clearance angle, tolerance class, fixing method, size and thickness. The square form and cylindrical hole allow stable clamping and repeatable positioning, which simplifies tool setup and ensures consistent results across shifts. Clear specification of holder parameters reduces mounting errors and supports repeatable part quality. Grade and coating explained for reliable machining The T9225 grade is a robust universal grade tailored for medium to heavy steel turning, combining fracture resistance with wear performance. The CVD coating increases abrasion resistance and helps maintain a sharper cutting edge under high-contact pressures. For operations with occasional interruption or variable cut depth, this combination enhances process security and reduces the risk of chipping compared with uncoated alternatives. Practical advantages for workshop decision-making A 1.6 mm corner radius offers a compromise between strength and profile accuracy, suitable for general turning and finishing where robustness is needed without sacrificing form. The 6.35 mm thickness and 90° corner geometry contribute to stable tool engagement on overhangs, while the single-sided chipbreaker supports predictable chip separation and evacuation. These characteristics make the insert a practical choice for job shops and production lines aiming for constant results and fewer tool interventions. Contact Metav Werkzeuge today for original Tungaloy inserts and application advice, and request assistance in matching SNMM 190616 T9225 to your holder and machining conditions Technical Data Article number: 6781240-Tungaloy Manufacturer article number: 6781240 Manufacturer SKU: TUN6781240 Designation: SNMM190616 Grade: T9225 Material: carbide Model series: ISO turning indexable inserts Label: SNMM190616 T9225 Tungaloy-Wendeplatte Facts Corner radius: 1.6 mm Insert size: 19 mm Thickness: 6.35 mm Cutting angle: 90° Rake angle: 0° Hole: cylindrical Special features CVD-coated carbide Square insert with cylindrical hole Single-sided chipbreaker For turning — medium to heavy steel machining ISO-standard geometry for common holders Compatibility depends on form, clearance, tolerance, fixing and size FAQ What materials is this insert suitable for? The SNMM190616 T9225 insert is intended primarily for medium to heavy steel machining; the T9225 grade and CVD-coated carbide composition provide the toughness and wear resistance required for such applications. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius increases edge strength and resistance to chipping, making the insert suitable for operations with varying engagement and moderate finishing tasks while maintaining dimensional stability. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO-standard dimensions; compatibility is ensured when the holder matches the insert form, clearance angle, tolerance class, fixing method, size and thickness. What benefit does the single-sided chipbreaker provide? The single-sided chipbreaker offers controlled chip formation and evacuation for many turning conditions, reducing the likelihood of entanglement and improving surface finish consistency in medium to heavy cuts. Which SKU identifies this product? This item is listed as SKU 6781240-Tungaloy and as Manufacturer SKU TUN6781240 for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190616 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade T9225, a rigid 90° square geometry and a secure cylindrical‑hole clamping for consistent medium‑to‑heavy steel turning; order genuine inserts via Metav Werkzeuge or consult our technical advisors for application support. SNMM190616 T9225 turning insert — 90° square, 1.6 mm radius — Tungaloy The SNMM190616 T9225 is an ISO‑standard square indexable insert for external and internal turning, engineered for robust, medium‑to‑heavy steel machining where interrupted cuts and varying engagement require extra toughness. CVD‑coated carbide grade T9225 90° square geometry for stable cutting 1.6 mm corner radius for enhanced strength ISO compatibility with standard holders Robust grade for demanding steel cutting The insert features a CVD‑coated carbide body in the T9225 grade, developed for medium‑to‑heavy steel machining where alternating cutting conditions and slight interruptions demand increased toughness. The coating improves resistance to adhesion and flank wear, so the tool maintains cutting performance over longer cycles. This results in fewer changeovers and more reliable process stability, especially on setups with variable rigidity. The characteristic of stable chip formation contributes to predictable tool life and consistent component quality. Geometry optimised for rigidity and repeatable accuracy The square geometry with a 90° cutting edge and a 1.6 mm corner radius delivers high rigidity at the cutting zone, reducing vibration and deflection during roughing passes. The 0° clearance angle and a plate thickness of 6.35 mm give a solid mechanical interface with the toolholder, while the 19 mm plate size provides a large effective edge for heavy engagement. The centrally placed cylindrical hole ensures secure clamping with the appropriate clamp and screw set, translating into repeatable seating and concentricity across indexings. Seamless integration into ISO turning systems Designed as part of an ISO turning system, the insert fits into a matched assembly of a square external holder or boring bar, a backing shim or clamp kit and replacement screws. Compatibility depends on insert form, free angle, tolerance class, fastening style, size and thickness; selecting holders that match these parameters ensures correct seat and torque distribution. The single‑side chipbreaker configuration assists chip control for many steel turning tasks, simplifying process setup and improving swarf evacuation in both longitudinal and facing operations. Practical selection advice and application notes Choose the one‑sided chipbreaker and grade combination according to workpiece material, machining strategy and machine/toolholder stiffness: the universal T9225 grade offers a balance of wear resistance and toughness, suitable where chip control and edge security are required. For finishing passes consider reduced feeds and take advantage of the stable 90° geometry for accurate shoulder and face turning. For specialist queries on holder compatibility, recommended cutting data or evolving machining scenarios, Metav Werkzeuge’s technical advisers can provide targeted recommendations to maximise productivity and tool life. For dependable medium‑to‑heavy steel turning, choose the genuine Tungaloy SNMM190616 T9225 inserts through Metav Werkzeuge — contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application guidance Technical data Name: SNMM190616 T9225 Tungaloy turning insert Manufacturer article number: 6780697 Manufacturer SKU: TUN6780697 Seller SKU: 6780697-Tungaloy Numbers / Core technical data Insert designation: 190616 Plate form: square (19 mm) Plate thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Geometry angle: 90° Hole: with cylindrical hole Chipbreaker: one‑sided Special features Material: cemented carbide (Hartmetall) Coating: CVD‑coated Grade: T9225 – universal, robust for medium/heavy steel machining ISO‑standard turning insert, compatible with ISO holders and boring bars Designed for external and internal turning, interrupted cuts and variable engagement System components: insert, matching holder/boring bar, backing shim/clamp set and screws FAQ What materials is this insert best suited for? The SNMM190616 T9225 insert is optimised for steel applications, especially medium‑to‑heavy machining where toughness and stable chip formation are required. Can the insert be used for internal turning? Yes, the square plate geometry and robust grade make the insert suitable for both external and internal turning when paired with a compatible boring bar. How does the T9225 grade behave under interrupted cuts? The T9225 CVD‑coated carbide offers increased toughness and reliable chip control, making it well suited to lightly interrupted or variable engagement conditions. Which holders are compatible with this insert? Compatibility depends on form, free angle, tolerance class, fastening, size and thickness; select ISO‑compatible square holders or boring bars specified for 19 mm square inserts with a 6.35 mm plate thickness. What is the advantage of the 1.6 mm corner radius? A 1.6 mm corner radius increases edge strength and reduces the risk of chipping during heavy engagement, improving tool life for roughing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190616 T9235 Wendeplatten - Tungaloy
Reliable performance in interrupted and unstable turning operations is achieved by the combination of the CVD‑coated carbide grade T9235 and a 1.6 mm nose radius, offering robust edge life and dependable chip control. Order the SNMM 190616 T9235 insert directly via Metav Werkzeuge or ask the consultants for application guidance. SNMM 190616 T9235 — ISO square indexable turning insert for turning by Tungaloy, CVD‑coated carbide, 1.6 mm radius The SNMM 190616 T9235 is an ISO‑spec square indexable turning insert intended for external and internal turning of steel where a tough cutting grade and reliable performance under interrupted cuts or unstable setups are required. CVD‑coated carbide grade T9235 1.6 mm nose radius for sturdy edge Square plate, 90° lead angle Single-sided chipbreaker, cylindrical hole Precision and dependable performance for demanding steel turning The CVD‑coated carbide grade T9235 has been developed for toughness rather than maximum cutting speed, which benefits operations with variable stability or interrupted cuts. With its CVD coating, substrate protection is improved against flank wear, while the tougher substrate resists chipping during shock loads. The square geometry and 90° approach give a predictable contact pattern, and the 1.6 mm nose radius increases edge strength for heavy engagement. In practice, this leads to longer index intervals and fewer tool changes, improving process continuity and machine uptime. Consistent chip control and secure clamping to support productivity The single‑sided chipbreaker is matched to moderate cutting speeds and unstable conditions to aid reliable chip formation and evacuation. The cylindrical hole and ISO form ensure positive clamping in standard external holders or boring bars, while compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness. Selecting the correct holder and torque for the clamp screw prevents chatter and preserves insert life. Clear technical matching reduces set‑up time and supports repeatable process performance. Practical workshop advantages and application guidance The insert’s configuration suits a wide range of general turning tasks on steel, offering a balance between edge robustness and surface finish where high cutting speeds are not the priority. Its square plate form provides four usable corners per index, enhancing economy in batch work. For interrupted cuts or roughing passes on unstable setups, this grade gives a safety margin against fracture, while finishing passes benefit from controlled chip form. Operators can therefore expect improved consistency and fewer emergency tool changes, contributing directly to smoother production flow. Secure reliable stock of Tungaloy SNMM 190616 T9235 indexable inserts through Metav Werkzeuge — contact the Metav Werkzeuge consultants via info@metav-werkzeuge.com or call +49 2822 7131930 for application‑specific advice and fast supply Technical data Article number: 6785873 Manufacturer SKU: TUN6785873 SKU: 6785873-Tungaloy WPL designation: SNMM190616 Series: ISO turning indexable inserts Grade: T9235 Cutting material: CVD‑coated carbide Facts Nose radius: 1.6 mm Plate size: 19 mm Thickness: 6.35 mm Clearance angle: 0° Lead angle: 90° Hole: cylindrical Special features Plate form: square Chipbreaker: single-sided Hole style: cylindrical hole Compatibility: determined by shape, clearance angle, tolerance class, clamping, size, thickness Application: turning FAQ Which materials is the insert best suited for? The SNMM 190616 T9235 indexable turning insert is formulated for machining steel and similar ferrous materials, offering toughness for unstable conditions and interrupted cuts. What are the key geometry features to note? This square insert has a 1.6 mm nose radius, a plate size of 19 mm, thickness 6.35 mm and a 90° lead angle; it also includes a cylindrical hole for secure clamping. Is the insert suitable for interrupted or unstable cuts? Yes, the T9235 grade emphasises toughness and is specifically intended for lower cutting speeds, unstable setups and more heavily interrupted cutting conditions. How is compatibility with toolholders determined? Compatibility depends on holder form, clearance angle, tolerance class, clamping system, plate size and thickness rather than on a single parameter. What chip control can be expected from this insert? With its single‑sided chipbreaker the insert promotes controlled chip formation under moderate feed and speed ranges, aiding evacuation and reducing recut risk. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMM 190616 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade optimised for steel, a robust 1.6 mm corner radius and secure ISO-compliant geometry for reliable turning under interrupted or unstable conditions; order the SNMM190616 T9235 Tungaloy indexable insert directly via Metav Werkzeuge or consult our advisors for holder compatibility and setup. SNMM 190616 T9235 indexable insert for Turning — Tungaloy A SNMM190616 T9235 ISO-standard indexable insert for external and internal turning, offering a square 90° geometry, 1.6 mm corner radius and CVD-coated carbide for demanding steel applications CVD-coated carbide T9235 grade Square 90° geometry, 19 mm inscribed circle 1.6 mm corner radius for robust cutting Cylindrical hole for secure clamping Reliable performance when cuts are interrupted or conditions vary The combination of a CVD-coated surface and a carbide substrate delivers predictable behaviour in challenging turning operations. The T9235 grade is formulated as a tough variant specifically for machining steel at reduced cutting speeds and under unstable or interrupted-cut conditions. This toughness reduces the risk of flank or chipping failures when the cut is broken or when workpiece support is limited, supporting steadier cycle times and fewer insert changes. The focus on material resilience translates directly into improved process uptime and fewer unplanned interventions. Secure seating and ISO compatibility for faster tool changes Designed to ISO dimensions, this square insert with 90° geometry and a cylindrical hole provides consistent seating in compatible holders. The nominal 19 mm inscribed circle and 6.35 mm thickness ensure compatibility across the ISO turning insert family, while the 0° clearance angle suits a broad range of external and internal turning set-ups. Clear, standardised interfaces mean predictable clamping and repeatable positioning, reducing set-up time and making index changes straightforward in routine production. Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness. Coating and substrate explained — benefits for process security A CVD-coated layer on a carbide substrate offers a hard, wear-resistant surface with a ductile backing that tolerates shock and interrupted engagement. The coating improves edge life under abrasive conditions while the substrate’s toughness resists premature fracture. For workshops tackling cast or alloyed steels and operations with intermittent interruptions, this pairing provides a compromise between wear resistance and edge strength. In practice, this means fewer insert failures, more consistent surface finishes and a reduction in scrap caused by unexpected tool breakages. Practical selection: chipbreaker, holder and set-up considerations The insert is supplied with a single-sided chipbreaker; selecting the right chipbreaker and matching the insert to an appropriate external holder or boring bar is essential for optimised chip control and surface integrity. The system typically comprises the ISO insert, a matching outside holder or boring bar, a support shim/clamp set and replacement screws. If uncertainty exists about the optimal chipbreaker or clamping arrangement for a particular turning task, technical consultation is recommended — Metav Werkzeuge can advise on holder selection, clamping torque and operational parameters. For further technical details or questions, please contact info@metav-werkzeuge.com or call +49 2822 7131930. Contact Metav Werkzeuge to discuss the Tungaloy SNMM190616 with CVD-coated T9235 grade, confirm holder compatibility and arrange supply for your turning process Technical data Article number: 6785889 Manufacturer SKU: TUN6785889 Our SKU: 6785889-Tungaloy Facts Insert designation: SNMM190616 Corner radius: 1.6 mm Inscribed circle: 19 mm Thickness: 6.35 mm Geometry angle: 90° Clearance angle: 0° Special features Material: CVD-coated carbide (T9235) Shape: square, with cylindrical hole Chipbreaker: single-sided Typical application: turning (external and internal) ISO-compliant series: ISO turning indexable inserts Compatibility: holder determined by form, clearance, tolerance, fastening, size and thickness FAQ Is this insert suitable for interrupted cuts in steel? Yes. The SNMM190616 T9235 insert from Tungaloy is a tough, CVD-coated carbide grade optimised for steel and performs well in interrupted and unstable cutting conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the SNMM190616 fits ISO-standard turning holders designed for 19 mm inscribed-circle, square inserts with a cylindrical hole. What are the key geometry values for set-up? Relevant values are a 90° geometry, 1.6 mm corner radius and 6.35 mm thickness; these dimensions determine seating, projection and clearance in the selected holder. How does the T9235 coating help in production? The CVD coating increases wear resistance while the tough carbide substrate maintains edge strength, improving tool life and process security in steel turning operations. Can Metav Werkzeuge advise on the correct chipbreaker? Yes. Metav Werkzeuge can recommend the appropriate chipbreaker and holder combination for specific materials and stability conditions; contact info@metav-werkzeuge.com for guidance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190616 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide toughness, a robust one-sided chipbreaker and ISO-compliant geometry for reliable turning performance; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SNMM190616 T9235 Tungaloy turning insert — ISO square insert with 1.6 mm corner radius SNMM190616 T9235 is an ISO-form turning insert designed for external and internal turning of steel, optimised for interrupted cuts and unstable machining conditions. CVD-coated carbide grade T9235 Suited to steel and interrupted cuts Square ISO form SNMM with 90° lead angle 1.6 mm corner radius for robust edge High wear resistance for demanding steel applications The CVD-coated carbide grade T9235 combines a tough substrate with a wear-resistant coating to withstand lower cutting speeds and heavy interruptions in the cut. This composition delivers increased edge stability during shock-prone operations and reduces flank wear under unstable conditions. By choosing a grade tailored to steel machining, tool life is extended and replacement intervals are longer, which supports predictable production cycles and lower tooling costs per part. Geometry and clamping that ensure repeatable accuracy The insert’s square SNMM form with a 90° approach angle and a 1.6 mm corner radius provides a stable cutting edge and straightforward orientation in standard ISO holders. The central cylindrical hole accommodates secure clamping and replacement with compatible screws and pads; compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. These standardised dimensions simplify tool management on the shop floor and support consistent repeatability between set-ups. Application-focused performance for turning operations Designed for both external and internal turning, the insert is supplied with a one-sided chipbreaker that suits variable depths of cut and intermittent machining. The chip control geometry aids evacuation of swarf even in unstable set-ups, decreasing the likelihood of recutting and secondary damage to the workpiece. For best results, pair the insert with a matched external holder or boring bar, select the chipbreaker and grade appropriate to the workpiece material and the stability of the set-up, and apply cutting parameters consistent with a tough, lower-speed grade. Production benefits: predictable cycles and fewer interruptions Using an ISO-compliant insert with a specifically chosen grade and chipbreaker translates into measurable shop-floor advantages: improved process stability, fewer tool changes and steadier surface finishes. The standardised form reduces the number of different holders required and makes stocking easier, while the CVD coating supports consistent performance across batches. Taken together, these features contribute to lower overall machining costs and a smoother production flow. For tailored advice on Tungaloy CVD-coated inserts and suitability for specific turning tasks, contact Metav Werkzeuge — our specialists will advise on the optimal grade, chipbreaker and holder combination for your application. Technical data Article number: 6785867 Manufacturer SKU: TUN6785867 SKU: 6785867-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: SNMM190616 T9235 Tungaloy insert Dimensions & geometry Size: 19 mm Thickness: 6.35 mm Corner radius: 1.6 mm Lead angle: 90° Relief angle: 0° Hole: with hole (cylindrical) Chipbreaker: one-sided Materials & features Material: carbide (Hartmetall) Grade: T9235 Coating: CVD-coated carbide Application: turning; external and internal turning; interrupted cuts; steel ISO designation: SNMM190616 Shape: square FAQ Which materials is this insert best suited for? The SNMM190616 T9235 insert is formulated for machining steel, especially where interrupted cuts or unstable conditions demand a tougher grade and CVD wear resistance. Is the insert compatible with standard ISO holders? Yes, the SNMM190616 follows ISO geometry; compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness and use of the matching clamp and screw. What advantages does the T9235 grade offer compared with standard grades? T9235 delivers a tougher carbide substrate with a CVD coating, offering improved edge stability under impact and longer life at lower cutting speeds compared with more wear-focused grades. How does the one-sided chipbreaker affect cutting performance? The one-sided chipbreaker on this insert helps control swarf evacuation during variable depth and interrupted cuts, reducing recutting and improving surface finish in unstable set-ups. Can the insert be used for both external and internal turning? Yes, the SNMM190616 insert is suitable for both external and internal turning when paired with the appropriate external holder or boring bar and clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190624 T9215 Wendeplatten - Tungaloy
Combine the high wear resistance of the T9215 CVD coating with the robustness of a 2.4 mm corner radius for steady productivity and reliable tool life in medium steel turning; integrate the insert into ISO tooling systems for a fast, low-effort changeover. Order the SNMM 190624 T9215 turning insert via Metav Werkzeuge or contact our consultants for application advice. SNMM 190624 T9215 ISO turning insert — CVD-coated carbide, 2.4 mm radius — Tungaloy A SNMM 190624 T9215 insert designed for ISO-standard turning, optimised for medium steel applications and suitable for both external and internal turning. ISO-compatible square insert for turning CVD-coated carbide for medium steel Corner radius 2.4 mm for edge strength Single-sided chipbreaker, with cylindrical hole Increase cycle output with a wear-resistant cutting edge The CVD-coated carbide grade T9215 combines high wear resistance with edge toughness, making it a dependable choice for medium steel machining where productivity and tool life matter. The coating reduces flank and crater wear during continuous and slightly interrupted cuts, which allows the machining process to run at higher cutting speeds while maintaining dimensional stability. This results in fewer tool changes, reduced downtime and a more predictable production rhythm for shops aiming to improve throughput. Reliable integration into ISO turning systems As an ISO turning plate, the insert follows standard dimensions and form factors to ensure straightforward compatibility with matching holders and boring bars. The square plate geometry and the specified thickness simplify clamping decisions; compatibility depends on form, relief angle, tolerance class, fastening and thickness. The corner radius 2.4 mm gives stronger edge support and improved resistance to chipping when facing moderate radial engagement, while the 0° relief supports stable cutting geometry for general turning applications. Practical handling for everyday workshop use Designed with a single-sided chipbreaker and a cylindrical hole for secure fastening, this turning insert is easy to mount and replace in the appropriate ISO external holder or boring bar. The plate thickness of 6.35 mm and the 19 mm size contribute to a robust seating in the clamp system, reducing vibration and improving surface finish consistency. Used in the right setup, the combination of the substrate and coating allows for productive machining with consistent component quality and repeatable results. Contact Metav Werkzeuge today for tailored advice on integrating the SNMM 190624 T9215 turning insert into existing tool systems or for assistance choosing the optimal chipbreaker and holder combination Technical data Article number: 6773840 Manufacturer SKU: TUN6773840 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core data Designation: SNMM190624 Size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Relief angle: 0° Included angle: 90° Design & features Coating / grade: T9215 (CVD-coated carbide) Plate form: square Hole: with cylindrical hole Chipbreaker: single-sided Typical application: external and internal turning System composition: ISO insert, matching external holder or boring bar, backing/clamping set and replacement screws FAQ Which materials is the insert best suited for? The SNMM 190624 T9215 insert is optimised for medium steel machining; the T9215 grade combines wear resistance and toughness for productive steel turning. Can this insert handle slightly interrupted cuts? Yes, the CVD-coated T9215 substrate is suitable for continuous to slightly interrupted cuts while preserving tool life and surface quality. What holders are compatible with this ISO insert? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the SNMM 190624 fits standard ISO external holders and compatible boring bars when those parameters match. What are the key geometric data for tool setup? The turning insert has a corner radius of 2.4 mm, a plate size of 19 mm and a thickness of 6.35 mm; it uses a 0° relief and a 90° included angle. Is the chip control suitable for medium-duty turning tasks? The single-sided chipbreaker on the SNMM 190624 T9215 insert provides reliable chip formation and evacuation for many medium-duty turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Are you unsure whether this tool meets the requirements or need additional technical data? Contact us by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930.
SNMM 190624 T9215 Wendeplatten - Tungaloy
High productivity and reliable wear resistance from a CVD‑coated carbide grade combine with a 2.4 mm corner radius and square form to deliver stable turning performance; order directly via Metav Werkzeuge or contact our consultants for compatibility advice. SNMM 190624 T9215 – SNMM ISO turning insert for turning by Tungaloy The SNMM190624 is a square ISO indexable turning insert designed for external and internal turning where consistent chip control and long tool life are required. CVD-coated carbide for enhanced wear resistance Square insert, 19 mm size, 6.35 mm thick 2.4 mm corner radius for versatile profiles Central cylindrical hole for secure mounting High productivity from CVD-coated carbide and defined geometry The combination of CVD-coated carbide and a purpose-built geometry provides a balance of wear resistance and fracture toughness, making the insert suitable for sustained production. The T9215 grade is engineered for the medium steel range and supports continuous to light interrupted cuts, which translates into fewer insert changes and more uptime on the shopfloor. The hardened coating reduces adhesion and flank wear, so machining runs remain stable over longer cycles. Secure mounting and ISO compatibility for predictable setup Engineers benefit from the ISO designation that defines the insert form and mounting features; the square ISO SNMM190624 format and the central cylindrical hole guarantee repeatable seating in ISO-compatible external holders or boring bars. The 6.35 mm thickness and clearly specified tolerances ensure correct clamping and rigidity, lowering the risk of chatter and producing a more consistent surface finish. Compatibility is determined by form, relief angle, fastening method, size and thickness, so holders must be selected accordingly. Optimised chip control and profile versatility A dedicated single-sided chipbreaker and a 2.4 mm corner radius enable controlled chip formation and flexible profile results, from light finishing to moderately robust turning. The square shape gives four usable cutting edges per insert, improving cost efficiency per edge while the 90° geometry supports accurate shoulder and external profiling operations. Together these features reduce cycle time and help maintain repeatable part quality. For machining tasks that demand durable performance from the T9215 grade, contact Metav Werkzeuge for guidance on suitable holders and rapid supply of SNMM190624 turning inserts Technical Data Manufacturer article number: 6774097 Manufacturer SKU: TUN6774097 SKU: 6774097-Tungaloy Model series: ISO turning indexable inserts ISO designation: SNMM190624 Grade: T9215 Facts Insert size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Geometry angle: 90° Relief (clearance) angle: 0° Hole style: cylindrical Design & special features Material: carbide Coating: CVD Shape: square Chipbreaker: single-sided Mounting: central hole for secure fastening Application: external and internal turning Suitable for: medium steel Typical system: ISO insert, matching external holder or boring bar, clamp/backup and replacement screw FAQ What materials is this insert intended for? The SNMM190624 T9215 Tungaloy indexable insert is optimised for medium steel, combining wear resistance and toughness for continuous to light interrupted turning. How is the insert fixed in the holder? The insert uses a central cylindrical hole and is secured in ISO-compatible holders; the seating depends on matching form, clearance angle and thickness. How many cutting edges are available per insert? Owing to its square form, the insert provides four usable edges, increasing cost-efficiency per index. What cutting conditions suit the T9215 grade? The T9215 grade supports high-productivity conditions in continuous and slightly interrupted cuts where wear resistance is required without sacrificing edge stability. Which feature improves chip control on this insert? The single-sided chipbreaker is designed to produce predictable chips and reduce machining interruptions during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190624 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust CVD-coated carbide grade (T9225), a 2.4 mm corner radius for increased toughness, and ISO compatibility that simplifies tool changeover; order the insert directly via Metav Werkzeuge or consult the technical team for tailored recommendations. SNMM190624 T9225 Tungaloy Turning Insert — CVD-coated carbide, square 19 mm A SNMM190624 indexable turning insert designed for medium to heavy steel turning, offering a robust universal grade and secure clamping via a cylindrical hole Robust CVD-coated carbide grade T9225 ISO‑standard square insert 19 mm 2.4 mm corner radius for increased toughness Cylindrical-hole fit for reliable clamping Consistent performance and extended tool life for heavy turning The SNMM190624 T9225 insert combines a CVD-coated carbide substrate with a universal T9225 grade engineered for the demands of medium to heavy steel machining. The CVD layer enhances wear resistance and temperature tolerance, which in turn supports stable chip formation under varying engagement conditions. This results in fewer tool changes and a predictable component finish, improving process efficiency and lowering overall machining costs by reducing downtime and stock of spare inserts. Simple system integration with ISO‑standard dimensions Designed to ISO specifications, the insert’s 19 mm size and 6.35 mm thickness make it compatible with a wide range of ISO holders and boring bars; the cylindrical hole and square form ensure positive indexing and secure clamping. Compatibility depends on holder geometry, clearance angle and tolerance class, so matching the insert to an appropriate external holder, clamp set and replacement screw secures repeatable positioning and reduces set‑up time. Clear dimensional data simplifies tool management and inventory control on the shop floor. Tough geometry and chip control for interrupted and stable cuts The 2.4 mm corner radius provides enhanced edge strength for interrupted cuts and heavier cuts, reducing the risk of premature edge failure. A single-sided chipbreaker offers controlled chip formation across mixed turning tasks, while the 0° clearance maintains a reliable cutting geometry for external and internal turning operations. Together these features deliver a balance between durability and surface quality, making this insert suitable for roughing and medium finishing when variable cutting conditions or slight interruptions require additional toughness. Choose the Tungaloy SNMM190624 T9225 insert for reliable, productive steel turning — contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Manufacturer item no.: 6780713 Our SKU: 6780713-Tungaloy Manufacturer SKU: TUN6780713 Model series: ISO turning indexable inserts Core dimensions Insert designation: SNMM190624 Insert size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Included angle: 90° Clearance angle: 0° Materials and features Material: carbide Coating / grade: T9225, CVD-coated carbide Shape: square Hole: cylindrical hole Chipbreaker: single-sided Application: turning (external and internal) FAQ Which materials is this insert intended for? The Tungaloy SNMM190624 T9225 insert is intended primarily for medium to heavy steel machining; the T9225 grade and CVD coating provide broad applicability where toughness and wear resistance are required. What are the key dimensions and how is compatibility ensured? Key dimensions are 19 mm size, 6.35 mm thickness and a 2.4 mm corner radius; compatibility with a holder follows ISO standards and depends on form, clearance angle and tolerance class (SNMM190624, SKU TUN6780713). Is the insert coated and what benefits does the coating offer? Yes — the insert uses a CVD-coated carbide substrate; the coating improves wear resistance, cutting-edge stability and performance under elevated temperatures, extending tool life in demanding turning tasks. Can the insert be used for interrupted cuts and internal turning? Yes — the robust geometry with a 2.4 mm corner radius and the single-sided chipbreaker make this indexable insert suitable for interrupted cuts as well as external and internal turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190624 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide robustness, a 2.4 mm corner radius and a single-sided chipbreaker designed for interrupted cuts; order or request guidance via Metav Werkzeuge to ensure process-fit selection and uninterrupted production. SNMM 190624 T9225 Turning insert (ISO; 2.4 mm radius) – Tungaloy The SNMM190624 T9225 is an ISO-compatible square turning insert for medium to heavy steel turning, delivering reliable edge stability and a single-sided chipbreaker for variable cutting conditions. CVD-coated carbide for high toughness ISO square form with 2.4 mm corner radius 0° clearance and cylindrical hole for secure clamping Single-sided chipbreaker for interrupted cuts Reliable performance where cutting conditions change The combination of a CVD-coated surface and a tough carbide substrate ensures consistent cutting performance under variable engagement and light interruptions. The applied grade T9225 is formulated for general-purpose to heavier machining of steel, offering increased resistance to edge chipping and stable chip formation. With this balance of wear resistance and toughness, predictable tool life and process reproducibility are enabled, reducing unscheduled changes and supporting production throughput. ISO fit and secure clamping for reproducible setups Designed to the ISO geometry, the square SNMM190624 form and the cylindrical hole provide defined positioning and reliable fastening in compatible holders. The 0° clearance angle and the plate’s 6.35 mm thickness contribute to axial and radial stability when clamped, which translates into improved repeatability and shorter set-up times. This standardised compatibility simplifies stock keeping and holder selection, supporting efficient changeovers and a stable machining routine. Improved chip control and strength for interrupted cuts The single-sided chipbreaker directs chips reliably while maintaining the insert’s cutting edge strength; combined with the 2.4 mm corner radius, the insert resists vibration and fracture in transient cutting events. This geometry supports a better surface finish and enables higher metal removal rates in many turning operations. For shops facing mixed batch work or occasional interrupted cuts, the geometry and breaker design reduce machining risk while maintaining productivity. For tailored advice on tool selection or to procure the SNMM 190624 T9225 insert from Tungaloy, contact Metav Werkzeuge for application-specific recommendations and ordering support. Technical data Article number: 6780698 SKU: 6780698-Tungaloy Manufacturer SKU: TUN6780698 Model series: ISO indexable turning inserts Core technical data Corner radius: 2.4 mm Thickness: 6.35 mm Size: 19 mm Clearance angle: 0° Included angle: 90° Design & special features Material: carbide Grade / coating: T9225 (CVD-coated carbide) Plate form: square Hole: with cylindrical hole Chipbreaker: single-sided Application: Turning ISO designation: SNMM190624 FAQ What materials is this insert suitable for? The SNMM190624 T9225 insert is engineered primarily for medium to heavy steel turning; the T9225 CVD-coated carbide grade provides toughness and wear resistance suited to varying steel conditions. Is the insert compatible with standard ISO square holders? Yes. The insert follows ISO geometry for square turning inserts and uses a cylindrical hole with a 0° clearance, allowing secure clamping in standard ISO-compatible external holders and boring bars. How does the 2.4 mm corner radius affect performance? A 2.4 mm corner radius increases edge strength and improves vibration resistance, which is beneficial for interrupted cuts and applications where a robust corner is required for surface integrity. Can this insert handle interrupted cuts reliably? The single-sided chipbreaker and the toughness of the T9225 grade make the insert well suited to light-to-moderate interrupted cutting, providing improved chip control and reduced risk of edge failure. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190624 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade and a robust 90° geometry for consistent productivity and extended edge life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMM 190624 T9225 turning insert (CVD-coated carbide, 90°) — Tungaloy A SNMM 190624 T9225 indexable turning insert designed for medium to heavy Stahl turning, featuring a one-sided chipbreaker and a cylindrical locating hole for secure clamping CVD-coated carbide grade T9225 Robust universal grade for Stahl turning Square insert 19 mm, thickness 6.35 mm Single-sided chipbreaker, 2.4 mm corner radius Reliable performance for medium to heavy Stahl turning The CVD-coated cemented carbide substrate and the T9225 grade deliver a balance of toughness and wear resistance that suits interrupted cuts and variable engagement conditions. The layered CVD coating reduces flank wear and increases edge life, which translates into fewer indexings and less unplanned downtime. For workshops focused on stable, reproducible cycles, the geometry provides a controlled cutting action that supports higher metal removal rates while maintaining dimensional consistency. Practical benefits on the shop floor The square 19 mm form combined with a 90° geometry simplifies setup for external shoulder turning and general profiling, enabling single-pass operations where applicable. The single-sided chipbreaker shapes chips reliably for a wide range of feed rates, reducing the risk of clogging and improving surface finish. The 2.4 mm corner radius balances strength and cutting performance: it strengthens the cutting edge without sacrificing the ability to achieve consistent component tolerances. These attributes result in better process stability and lower per-part tooling costs. Compatibility, mounting and selection guidance Compliance with ISO specifications means the insert mates with holders that match form, clearance angle, tolerance class, fastening style, size and thickness. The central cylindrical locating hole ensures repeatable clamping and simplifies replacement. When selecting a holder and cutting parameters, match the T9225 grade and the one-sided chipbreaker to the workpiece material and rigidity of the machining setup. For less rigid conditions or highly interrupted cuts the increased toughness of this grade helps avoid premature chipping; for stable set-ups, the coating supports higher cutting speeds and consistent surface quality. For tailored application advice or to secure genuine Tungaloy inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide machining parameter recommendations and compatibility checks Technical data Article number: 6781335 Manufacturer SKU: TUN6781335 SKU: 6781335-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall ISO designation: SNMM190624 Grade: T9225 With hole: with cylindrical hole Plate form: square Chipbreaker: single-sided Facts Corner radius: 2.4 mm Size: 19 mm Thickness: 6.35 mm Included angle: 90° Rake angle (free angle): 0° Special features CVD-coated cemented carbide Robust universal grade for medium to heavy Stahl machining One-sided chipbreaker for controlled chip formation ISO‑standard geometry for wide holder compatibility Cylindrical locating hole for secure clamping FAQ What materials is this insert suitable for? The Tungaloy SNMM 190624 T9225 insert is formulated for medium to heavy Stahl machining and performs well where toughness and wear resistance are required. How does the chipbreaker influence machining? The single-sided chipbreaker on this insert controls chip shape and evacuation, improving surface finish and reducing the chance of chip entanglement during turning operations. Can this insert be used for interrupted cuts? Yes, the T9225 grade offers enhanced toughness suitable for mildly interrupted cuts and variable engagement conditions, reducing the likelihood of edge chipping. What does the ISO code 190624 indicate? The ISO code describes the insert form and size: a square insert with a nominal size of 19 mm and an internal designation corresponding to the SNMM geometry. Is the locating hole important for clamping? The cylindrical locating hole provides repeatable positioning and improves clamping stability, which is especially beneficial in high-production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190624 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough CVD-coated carbide grade, precise ISO-format geometry and reliable chip control for consistent turning performance. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNMM 190624 T9235 SNMM Turning insert — ISO-format square 90° by Tungaloy SNMM190624 T9235 is a square ISO-format turning insert designed for general turning of steel, offering robust performance in interrupted and unstable cuts CVD-coated carbide T9235 for steel machining ISO-format square insert with 90° geometry 2.4 mm corner radius for strong edge stability Single-sided chipbreaker with cylindrical hole Consistent performance with a tough CVD-coated grade This indexable plate is supplied in the tough grade T9235, a CVD-coated carbide formulation developed for steel at moderate cutting speeds and for conditions with interruptions or reduced rigidity. The alloy composition and coating promote stable chip formation and reduce the risk of brittle chipping under shock loads. As a consequence, the tool life becomes more predictable in variable setups and the operator benefits from fewer unscheduled insert changes, supporting efficient production cycles without compromising surface integrity. ISO-format compatibility and secure mounting details The insert follows the ISO designation and fits ISO-compliant toolholders; compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness. Key dimensions are 19 mm plate size, 6.35 mm thickness and a 2.4 mm corner radius, while the geometry provides a 90° included angle. The insert is supplied with a cylindrical hole for positive clamping and is square in form, simplifying inventory and ensuring interchangeability across common external holders and boring bars. Machining benefits: reliability and surface quality Due to the combination of the tough grade and the chip control design, the insert produces consistent swarf and contributes to reproducible surface finishes even on interrupted cuts. The single-sided chipbreaker is tuned for chip control in steel, lowering the likelihood of edge build-up and facilitating stable cutting forces. In practice this means fewer cycle interruptions, improved process reliability and a better balance between cutting speed and tool life for medium-duty turning operations. Recommended system composition and typical applications A complete system comprises the ISO insert, a suitable external holder or boring bar, a backing shim or clamping set and replacement screws. The component is intended for both external and internal turning operations; select the chipbreaker and tough grade T9235 according to workpiece material, machining strategy and fixture rigidity. For best results, pair the insert with a stable holder and verify clamping torque to maintain consistent cutting geometry during production runs. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy SNMM190624 T9235 inserts and to arrange technical consultation or purchase: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number (manufacturer): 6785866 SKU: 6785866-Tungaloy Manufacturer article number: TUN6785866 Facts Plate size: 19 mm Corner radius: 2.4 mm Plate thickness: 6.35 mm Included angle: 90° Clearance angle: 0° Mounting: with cylindrical hole Special features ISO-format square turning insert Grade: T9235 (CVD-coated carbide) Single-sided chipbreaker Application: turning (external and internal) System: insert, holder/boring bar, backing shim/clamping set, spare screws FAQ What materials is this insert suited for? The SNMM190624 T9235 turning insert is optimised for machining steel, providing good chip control and edge stability under interrupted cutting conditions. Can the insert be used for internal turning as well as external turning? Yes, the SNMM190624 T9235 insert is designed for both external and internal turning when paired with a compatible holder or boring bar. What does the designation 190624 mean for fitment? The ISO code 190624 denotes the plate geometry and size; ensure the toolholder matches the ISO-format SNMM190624 geometry and the 6.35 mm thickness for correct compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190624 T9235 Wendeplatten - Tungaloy
Combining a CVD‑coated carbide T9235 grade with a square 90° geometry and a 2.4 mm corner radius delivers a robust solution for unstable and interrupted turning operations; order the SNMM190624 directly via Metav Werkzeuge or consult their specialists for application guidance. SNMM190624 T9235 ISO turning insert for external and internal turning — Tungaloy SNMM190624 T9235 is an ISO‑standard indexable turning insert intended for external and internal turning applications, optimised for steel machining under interrupted and less stable cutting conditions. ISO‑standard SNMM190624 insert CVD‑coated carbide grade T9235 Square 90° geometry, 2.4 mm corner radius One-sided chipbreaker for interrupted cuts High performance where stability is limited The insert combines a CVD‑coated surface with a carbide substrate to provide wear resistance and reliable edge life under demanding conditions. The T9235 grade is formulated as a tougher option for machining steel, making it suitable when feed interruptions or vibration compromise continuous cutting speeds. The robust square geometry and 90° cutting angle support stable force distribution, while the 2.4 mm corner radius contributes to durable cutting edges and reduced risk of chipping during interrupted engagement. Designed for straightforward integration and secure clamping Compatibility with holders depends on form, relief angle, tolerance class, attachment method, size and thickness; the insert is supplied with a cylindrical hole to allow positive locating and secure fastening in common external holders or boring bars. The plate thickness of 6.35 mm and standard 19 mm size match many ISO holder systems, and the one‑sided chipbreaker helps control chips during heavier feeds. The clear system structure — insert, compatible holder or boring bar, support/ clamping set and replacement screws — simplifies tool selection and maintenance planning. Practical benefits for shopfloor productivity Choosing this grade and geometry reduces the frequency of insert changes and helps maintain part quality in interrupted turning operations. The one‑sided chipbreaker assists in chip control and evacuation, lowering the risk of built‑up edge and improving surface finish in unstable situations. As a result, machining cycles can remain efficient even when conditions are less than ideal, supporting consistent throughput and predictable tool costs over time. Material suitability and machining guidance This insert is primarily intended for machining steel; the tough CVD grade favours lower cutting speeds where stability cannot be guaranteed. For best results, select a holder with appropriate rigidity and ensure correct clamping torque for the supplied cylindrical hole arrangement. When facing heavily interrupted cuts, the combination of the 2.4 mm corner radius and the insert’s geometry helps prevent premature edge damage, while maintaining acceptable surface quality. For application advice or to secure availability of the SNMM190624 T9235 turning insert from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; their technical team can recommend suitable holders and clamping sets for specific turning tasks. Technical data Article number: 6786067 Manufacturer SKU: TUN6786067 Manufacturer: Tungaloy Facts Series: ISO‑Drehwendeschneidplatten Grade: T9235 Material: Hartmetall ISO designation: SNMM190624 Size: 19 mm Thickness: 6.35 mm Corner radius: 2.4 mm Relief angle: 0° Geometry angle: 90° Special features CVD‑coated carbide Tough grade for steel and interrupted cuts Square plate with cylindrical hole One‑sided chipbreaker Compatible with ISO external holders and boring bars System elements: insert, holder/boring bar, support/clamping set, replacement screws FAQ What machining tasks suit this insert best? The SNMM190624 T9235 insert is intended for external and internal turning, especially where interrupted cuts or unstable cutting conditions are expected; the T9235 grade is tailored for steel machining. Is the insert compatible with common ISO holders? Compatibility is determined by form, relief angle, tolerance class, attachment, size and thickness; the SNMM190624 uses a cylindrical hole for positive locating in standard ISO holders. What is the cutting edge preparation and angle? The insert features a square 90° geometry with a 0° relief angle and a 2.4 mm corner radius to balance edge strength and surface finish. Does the coating improve wear resistance for steel? Yes, the CVD‑coated T9235 grade enhances wear resistance and is designed to perform under the lower cutting speeds and interrupted engagement often encountered when machining steel. Which additional components are required for mounting? A suitable external holder or boring bar, an underlay/clamping set and replacement screws complete the system for secure mounting of the SNMM190624 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 190624 T9235 Wendeplatten - Tungaloy
Benefit from robust CVD-coated carbide and a precise 2.4 mm corner radius for stable turning in interrupted cuts; efficiency and compatibility with ISO holders reduce tool-change downtime. Order the SNMM 190624 T9235 directly via Metav Werkzeuge or consult our specialists for application advice. SNMM 190624 T9235 indexable turning insert by Tungaloy — CVD-coated carbide, 2.4 mm corner radius, for turning The SNMM 190624 T9235 is an ISO‑standard square insert intended for external and internal turning, designed for stable chip formation in interrupted cuts and applications with variable rigidity CVD-coated carbide for tough steel machining Square 90° insert with 2.4 mm radius Single-sided chipbreaker for interrupted cuts ISO-compatible for standard holders and bars Stable cutting in interrupted or unstable turning The combination of a CVD-coated carbide substrate and the T9235 grade delivers wear resistance and toughness for turning steel under lower cutting speeds or unstable conditions. The coating enhances flank and crater resistance while the substrate toughness reduces chipping during interrupted cuts. This results in longer in‑service life and more predictable tool behaviour, helping to maintain cycle times and component tolerances. Fast, secure clamping and straightforward interchangeability Supplied as an ISO‑format insert, the item matches industry‑standard holders when shape, relief, tolerance class, clamping method, size and thickness align. The 0° relief angle combined with a cylindrical central hole allows secure centring and repeatable seating in compatible external holders or boring bars. With a plate thickness of 6.35 mm and a 19 mm edge length, toolset replacement is quick, reducing machine downtime and simplifying inventory management. Predictable chip control and robust cutting edge The square geometry with a 90° angle and a 2.4 mm corner radius gives a strong cutting edge suitable for heavier feeds and intermittent engagement. The single-sided chipbreaker promotes controlled chip formation, easing chip evacuation and reducing the risk of built‑up edge. For system assembly, pair the insert with a matched outer holder or boring bar, plus the appropriate shim/clamp set and spare screws, to ensure consistent performance and clamp integrity. For reliable interrupted turning with Tungaloy’s durable CVD‑coated carbide inserts, contact Metav Werkzeuge for ordering or technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785949 Manufacturer SKU: TUN6785949 Vendor SKU: 6785949-Tungaloy Model series: ISO‑turning inserts Brand: Tungaloy Material: Carbide Grade/coating: T9235 / CVD‑coated ISO designation: SNMM190624 Facts Plate form: square Plate size (edge): 19 mm Plate thickness: 6.35 mm Corner radius: 2.4 mm Relief angle: 0° Insert angle: 90° Hole: with hole Hole style: cylindrical Special features Single‑sided chipbreaker Suited for steel at lower cutting speeds Designed for interrupted cuts and unstable conditions ISO‑standard insert for use with matching holders and boring bars System components: insert, holder/boring bar, shim/clamp set, spare screws FAQ What materials is this insert intended for? The SNMM 190624 T9235 is designed primarily for machining steel and offers toughness for interrupted cuts and less stable setups. How does the T9235 grade affect tool life? The T9235 CVD‑coated grade combines abrasion resistance with substrate toughness, which extends life under lower cutting speeds and during intermittent cutting. Which insert dimensions are critical for holder compatibility? Compatibility depends on plate shape, relief angle (0°), thickness (6.35 mm), size (19 mm) and the clamping/tolerance arrangement of the holder when using SNMM190624. Is the chip control suitable for heavy feeds? Yes, the single‑sided chipbreaker and 2.4 mm corner radius provide predictable chip formation and a robust cutting edge for heavier feeds and interrupted engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMM 250724 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, secure edge stability and simple indexability for efficient turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and machining data. SNMM 250724 T9215 turning insert — Tungaloy, CVD-coated carbide, 90° The SNMM250724 T9215 insert is an ISO-standard square turning insert designed for medium steel machining with robust edge integrity and reliable productivity. CVD-coated carbide grade T9215 for medium steel ISO SNMM shape, 25 mm square insert 90° geometry with 2.4 mm corner radius Single-sided chipbreaker, cylindrical hole fixing Proven productivity for medium-steel turning with consistent tool life The CVD-coated carbide grade T9215 is formulated to combine high wear resistance with breakage resistance, making it a pragmatic choice for continuous to lightly interrupted turning of medium-strength steel. The coating provides a hard, wear-resistant surface that slows flank and crater wear, while the substrate ensures toughness; together this results in longer periods between indexings and reduced tool-change downtime. For shops seeking stable, repeatable throughput, the combination of coated carbide and a square ISO insert form delivers a dependable ratio of life to cost. Robust geometry and indexability that simplify process planning The square 25 mm insert with 90° principal cutting geometry and a 2.4 mm corner radius offers a balance between edge strength and general-purpose versatility. A larger corner radius increases edge robustness for heavier cuts and interrupted sections, whereas the square form provides multiple usable edges for economical indexing. The insert’s cylindrical through-hole and defined relief angle ensure mechanical consistency when paired with a matching ISO holder; compatibility depends on form, relief angle, tolerance class, fixing, size and thickness, so selecting the correct clamping system is essential to achieve the insert’s rated performance. Chip control and process reliability for shop-floor requirements The single-sided chipbreaker on this insert is tuned for medium-steel applications, producing manageable chip segments and promoting predictable cutting forces. Controlled chip flow reduces re-cutting of swarf and supports safer part handling, which helps to maintain surface finish and extend tool life. Combined with the insert’s coated surface, the chipbreaker contributes directly to reproducible cycle times and less variance between batches — a clear rational advantage for production environments where process stability is the priority. Practical guidance for integration and cutting data When integrating this ISO insert into a tool system, ensure the chosen holder matches in form and tolerance and that the clamping screw and backing pad provide firm seating. For initial trials, moderate cutting speeds and feeds suited to medium steel are advisable to validate heat generation and chip behaviour; once stable performance is confirmed, parameters can be pushed to exploit the insert’s productive machining window. If interrupted cuts are frequent, the larger corner radius and robust substrate will help prevent premature chipping, offering a safer margin against unexpected impacts. Contact Metav Werkzeuge for application-specific recommendations and stock information on the SNMM250724 T9215 Tungaloy turning insert — specialists are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to advise on holder compatibility and cutting data Technical data Article number: 6773854 Manufacturer SKU: TUN6773854 SKU: 6773854-Tungaloy Designation: SNMM250724 Facts Corner radius: 2.4 mm Insert size: 25 mm Thickness: 7.94 mm Relief angle: 0° Principal angle: 90° Grade: T9215 Special features Material: carbide Coating: CVD-coated Shape: square ISO insert Fixing: with cylindrical through-hole Chipbreaker: one-sided Typical application: turning Model series: ISO indexable turning inserts System components: insert, matching external holder or boring bar, backing pad/clamp set and replacement screw FAQ What materials is this insert suited for? The SNMM250724 T9215 insert is intended primarily for medium-steel machining; the CVD-coated T9215 grade balances wear resistance and toughness for productive turning of these materials. How does the 2.4 mm corner radius affect performance? A 2.4 mm corner radius increases edge strength and stability during heavier cuts or light interruptions, improving resistance to chipping compared with smaller radii. What should be considered when choosing a holder? Holder compatibility for the SNMM250724 is determined by form, relief angle, tolerance class, fixing method, size and thickness; select an ISO-compatible external holder or boring bar that matches these criteria. What is the benefit of the single-sided chipbreaker? The single-sided chipbreaker on this insert produces controlled chip segments and predictable chip flow, which supports safer machining, improved surface finish and consistent cycle times. Is the insert suitable for interrupted cuts? Yes; the coated substrate and the larger corner radius give improved resistance to edge failure in continuous to lightly interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250724 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade that balances toughness and wear resistance, an ISO-standard square form that simplifies holder selection, and a useful 2.4 mm corner radius to increase edge strength — all aimed at steady production and fewer insert changes. Order directly via Metav Werkzeuge or ask the consultants for application support. SNMM250724 T9225 – ISO SNMM turning insert, CVD-coated carbide by Tungaloy The SNMM250724 T9225 is an ISO-standard square turning insert designed for external and internal turning, offering a robust universal grade for medium to heavy steel machining. CVD-coated carbide for durable performance ISO SNMM250724 square insert, 25 mm size 2.4 mm corner radius for stronger edge life Single-sided chipbreaker for reliable chip control Increased uptime through a balance of wear resistance and toughness The CVD-coated carbide grade delivers a compromise between abrasion resistance and mechanical toughness, making it suitable for variable cutting conditions and light interruptions. Selecting the T9225 grade reduces the frequency of insert changes by extending tool life under fluctuating engagement, which in turn supports continuous production and lower tool costs per part. The carbide substrate provides a predictable wear behaviour, enabling stable cycle times and fewer unscheduled stops. Faster set-up and consistent clamping across ISO systems Compatibility is governed by form, clearance angle, tolerance class, fixing method, size and thickness; the ISO-standard square geometry streamlines holder matching and replacement. The 25 mm size and 7.94 mm thickness paired with a cylindrical hole ensure secure clamping and consistent flank contact, shortening set-up times and reducing the risk of misalignment. This consistency simplifies inventory management for machines that use standardised indexable inserts. Better chip control and robust cutting edge for steel turning With a single-sided chipbreaker tuned for turning and a 2.4 mm corner radius, the insert manages chips effectively while presenting a resilient edge for medium to heavy steel operations. The 90° approach angle creates a robust cutting geometry that spreads cutting forces over a larger area, which benefits turning tasks where stability may vary. The combination supports improved surface finish and reduced vibration compared with more fragile geometries. Practical selection guidance for integration into production Choose the correct chipbreaker and grade based on workpiece material, machining type and machine rigidity; the system comprises the indexable insert, a suitable external holder or boring bar, a shim/clamp kit and replacement screws. The technical identification — model series ISO-Drehwendeschneidplatten and designation SNMM250724 — helps specify the right holder geometry and tolerance class. For traceability the manufacturer article number is available and can be used in procurement and tool management systems. For reliable deliveries and technical advice on the SNMM250724 T9225 turning insert contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss integration into production and application-specific recommendations Technical data Article number: 6780902 Manufacturer SKU: TUN6780902 Model series: ISO-Drehwendeschneidplatten Designation: SNMM250724 T9225 Tungaloy-Wendeplatte Specifications Size: 25 mm Thickness: 7.94 mm Corner radius: 2.4 mm Relief angle: 0° Approach angle: 90° Special features Material: Hartmetall Coating/grade: T9225, CVD-coated carbide Plate shape: square Hole style: with cylindrical hole Chipbreaker: single-sided Typical application: external and internal turning of steel FAQ What materials is this insert suited for? The SNMM250724 T9225 insert is a robust universal grade designed primarily for medium to heavy steel turning; the T9225 composition offers increased toughness for variable engagement. How does the 2.4 mm corner radius affect performance? A 2.4 mm corner radius strengthens the cutting edge, improving resistance to chipping and enabling higher feed rates in operations where a robust profile is required. Is the insert compatible with standard ISO holders? Yes, the insert follows the ISO SNMM form; compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness with the chosen holder. What is the purpose of the cylindrical hole in the insert? The cylindrical hole enables secure central clamping and precise positioning on the holder, contributing to consistent repeatability and reduced set-up variance. Which chipbreaker should be chosen for varying stability and interrupted cuts? For varying stability and light interruptions, select a chipbreaker and the T9225 grade that prioritises toughness and chip control; the single-sided chipbreaker on this insert supports reliable swarf evacuation in such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com